review.tizen.org Git - platform/kernel/linux-rpi.git/log

pinctrl/rockchip: support setting input-enable param

commit 42d90a1e5caf73138ddde42da5a9fe2b543f9a2c upstream.

Handle the PIN_CONFIG_INPUT_ENABLE param for configuring GPIOs as input.

Signed-off-by: Caleb Connolly <kc@postmarketos.org>
Link: https://lore.kernel.org/r/20220328005005.72492-3-kc@postmarketos.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md: bcache: check the return value of kzalloc() in detached_dev_do_request()

commit 40f567bbb3b0639d2ec7d1c6ad4b1b018f80cf19 upstream.

The function kzalloc() in detached_dev_do_request() can fail, so its
return value should be checked.

Fixes: bc082a55d25c ("bcache: fix inaccurate io state for detached bcache devices")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20220527152818.27545-4-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md: fix double free of io_acct_set bioset

commit 42b805af102471f53e3c7867b8c2b502ea4eef7e upstream.

Now io_acct_set is alloc and free in personality. Remove the codes that
free io_acct_set in md_free and md_stop.

Fixes: 0c031fd37f69 (md: Move alloc/free acct bioset in to personality)
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md: Don't set mddev private to NULL in raid0 pers->free

commit 0f2571ad7a30ff6b33cde142439f9378669f8b4f upstream.

In normal stop process, it does like this:
   do_md_stop
      |
   __md_stop (pers->free(); mddev->private=NULL)
      |
   md_free (free mddev)
__md_stop sets mddev->private to NULL after pers->free. The raid device
will be stopped and mddev memory is free. But in reshape, it doesn't
free the mddev and mddev will still be used in new raid.

In reshape, it first sets mddev->private to new_pers and then runs
old_pers->free(). Now raid0 sets mddev->private to NULL in raid0_free.
The new raid can't work anymore. It will panic when dereference
mddev->private because of NULL pointer dereference.

It can panic like this:
[63010.814972] kernel BUG at drivers/md/raid10.c:928!
[63010.819778] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[63010.825011] CPU: 3 PID: 44437 Comm: md0_resync Kdump: loaded Not tainted 5.14.0-86.el9.x86_64 #1
[63010.833789] Hardware name: Dell Inc. PowerEdge R6415/07YXFK, BIOS 1.15.0 09/11/2020
[63010.841440] RIP: 0010:raise_barrier+0x161/0x170 [raid10]
[63010.865508] RSP: 0018:ffffc312408bbc10 EFLAGS: 00010246
[63010.870734] RAX: 0000000000000000 RBX: ffffa00bf7d39800 RCX: 0000000000000000
[63010.877866] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffa00bf7d39800
[63010.884999] RBP: 0000000000000000 R08: fffffa4945e74400 R09: 0000000000000000
[63010.892132] R10: ffffa00eed02f798 R11: 0000000000000000 R12: ffffa00bbc435200
[63010.899266] R13: ffffa00bf7d39800 R14: 0000000000000400 R15: 0000000000000003
[63010.906399] FS:  0000000000000000(0000) GS:ffffa00eed000000(0000) knlGS:0000000000000000
[63010.914485] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[63010.920229] CR2: 00007f5cfbe99828 CR3: 0000000105efe000 CR4: 00000000003506e0
[63010.927363] Call Trace:
[63010.929822]  ? bio_reset+0xe/0x40
[63010.933144]  ? raid10_alloc_init_r10buf+0x60/0xa0 [raid10]
[63010.938629]  raid10_sync_request+0x756/0x1610 [raid10]
[63010.943770]  md_do_sync.cold+0x3e4/0x94c
[63010.947698]  md_thread+0xab/0x160
[63010.951024]  ? md_write_inc+0x50/0x50
[63010.954688]  kthread+0x149/0x170
[63010.957923]  ? set_kthread_struct+0x40/0x40
[63010.962107]  ret_from_fork+0x22/0x30

Removing the code that sets mddev->private to NULL in raid0 can fix
problem.

Fixes: 0c031fd37f69 (md: Move alloc/free acct bioset in to personality)
Reported-by: Fine Fan <ffan@redhat.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/ntfs3: Fix invalid free in log_replay

commit f26967b9f7a830e228bb13fb41bd516ddd9d789d upstream.

log_read_rst() returns ENOMEM error when there is not enough memory.
In this case, if info is returned without initialization,
it attempts to kfree the uninitialized info->r_page pointer. This patch
moves the memset initialization code to before log_read_rst() is called.

Reported-by: Gerald Lee <sundaywind2004@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

exportfs: support idmapped mounts

commit 3a761d72fa62eec8913e45d29375344f61706541 upstream.

Make the two locations where exportfs helpers check permission to lookup
a given inode idmapped mount aware by switching it to the lookup_one()
helper. This is a bugfix for the open_by_handle_at() system call which
doesn't take idmapped mounts into account currently. It's not tied to a
specific commit so we'll just Cc stable.

In addition this is required to support idmapped base layers in overlay.
The overlay filesystem uses exportfs to encode and decode file handles
for its index=on mount option and when nfs_export=on.

Cc: <stable@vger.kernel.org>
Cc: <linux-fsdevel@vger.kernel.org>
Tested-by: Giuseppe Scrivano <gscrivan@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: add two trivial lookup helpers

commit 00675017e0aeba5305665c52ded4ddce6a4c0231 upstream.

Similar to the addition of lookup_one() add a version of
lookup_one_unlocked() and lookup_one_positive_unlocked() that take
idmapped mounts into account. This is required to port overlay to
support idmapped base layers.

Cc: <linux-fsdevel@vger.kernel.org>
Tested-by: Giuseppe Scrivano <gscrivan@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate

commit b95b668eaaa2574e8ee72f143c52075e9955177e upstream.

We're only adding BCMs to the commit list in aggregate(), but there are
cases where pre_aggregate() is called without subsequently calling
aggregate(). In particular, in icc_sync_state() when a node with initial
BW has zero requests. Since BCMs aren't added to the commit list in
these cases, we don't actually send the zero BW request to HW. So the
resources remain on unnecessarily.

Add BCMs to the commit list in pre_aggregate() instead, which is always
called even when there are no requests.

Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
[georgi: remove icc_sync_state for platforms with incomplete support]
Link: https://lore.kernel.org/r/20211125174751.25317-1-djakov@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

interconnect: qcom: sc7180: Drop IP0 interconnects

commit 2f3724930eb4bba74f7d10bc3bef5bb22dd323df upstream.

The IPA BCM resource ("IP0") on sc7180 was moved to the clk-rpmh driver
in commit bcd63d222b60 ("clk: qcom: rpmh: Add IPA clock for SC7180") and
modeled as a clk, but this interconnect driver still had it modeled as
an interconnect. This was mostly OK because nobody used the interconnect
definition, until the interconnect framework started dropping bandwidth
requests on interconnects that aren't used via the sync_state callback
in commit 7d3b0b0d8184 ("interconnect: qcom: Use icc_sync_state"). Once
that patch was applied the IP0 resource was going to be controlled from
two places, the clk framework and the interconnect framework.

Even then, things were probably going to be OK, because commit
b95b668eaaa2 ("interconnect: qcom: icc-rpmh: Add BCMs to commit list in
pre_aggregate") was needed to actually drop bandwidth requests on unused
interconnects, of which the IPA was one of the interconnect that wasn't
getting dropped to zero. Combining the three commits together leads to
bad behavior where the interconnect framework is disabling the IP0
resource because it has no users while the clk framework thinks the IP0
resource is on because the only user, the IPA driver, has turned it on
via clk_prepare_enable(). Depending on when sync_state is called, we can
get into a situation like below:

  IPA driver probes
  IPA driver gets notified modem started
   runtime PM get()
    IPA clk enabled -> IP0 resource is ON
  sync_state runs
   interconnect zeroes out the IP0 resource -> IP0 resource is off
  IPA driver tries to access a register and blows up

The crash is an unclocked access that manifest as an SError.

SError Interrupt on CPU0, code 0xbe000011 -- SError
CPU: 0 PID: 3595 Comm: mmdata_mgr Not tainted 5.17.1+ #166
Hardware name: Google Lazor (rev1 - 2) with LTE (DT)
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : mutex_lock+0x4c/0x80
lr : mutex_lock+0x30/0x80
sp : ffffffc00da9b9c0
x29: ffffffc00da9b9c0 x28: 0000000000000000 x27: 0000000000000000
x26: ffffffc00da9bc90 x25: ffffff80c2024010 x24: ffffff80c2024000
x23: ffffff8083100000 x22: ffffff80831000d0 x21: ffffff80831000a8
x20: ffffff80831000a8 x19: ffffff8083100070 x18: 00000000ffff0a00
x17: 000000002f7254f1 x16: 0000000000000100 x15: 0000000000000000
x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
x11: 000000000001f0b8 x10: ffffffc00931f0b8 x9 : 0000000000000000
x8 : 0000000000000000 x7 : fefefefefeff2f60 x6 : 0000808080808080
x5 : 0000000000000000 x4 : 8080808080800000 x3 : ffffff80d2d4ee28
x2 : ffffff808c1d6e40 x1 : 0000000000000000 x0 : ffffff8083100070
Kernel panic - not syncing: Asynchronous SError Interrupt
CPU: 0 PID: 3595 Comm: mmdata_mgr Not tainted 5.17.1+ #166
Hardware name: Google Lazor (rev1 - 2) with LTE (DT)
Call trace:
  dump_backtrace+0xf4/0x114
  show_stack+0x24/0x30
  dump_stack_lvl+0x64/0x7c
  dump_stack+0x18/0x38
  panic+0x150/0x38c
  nmi_panic+0x88/0xa0
  arm64_serror_panic+0x74/0x80
  do_serror+0x0/0x80
  do_serror+0x58/0x80
  el1h_64_error_handler+0x34/0x4c
  el1h_64_error+0x78/0x7c
  mutex_lock+0x4c/0x80
  __gsi_channel_start+0x50/0x17c
  gsi_channel_start+0x54/0x90
  ipa_endpoint_enable_one+0x34/0xc0
  ipa_open+0x4c/0x120

Remove all IP0 resource management from the interconnect driver so that
clk-rpmh is the sole owner. This fixes the issue by preventing the
interconnect driver from overwriting the IP0 resource data that the
clk-rpmh driver wrote.

Cc: Alex Elder <elder@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Taniya Das <quic_tdas@quicinc.com>
Cc: Mike Tipton <quic_mdtipton@quicinc.com>
Fixes: b95b668eaaa2 ("interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate")
Fixes: bcd63d222b60 ("clk: qcom: rpmh: Add IPA clock for SC7180")
Fixes: 7d3b0b0d8184 ("interconnect: qcom: Use icc_sync_state")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Alex Elder <elder@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220412220033.1273607-2-swboyd@chromium.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: only allow test_dummy_encryption when supported

commit 5f41fdaea63ddf96d921ab36b2af4a90ccdb5744 upstream.

Make the test_dummy_encryption mount option require that the encrypt
feature flag be already enabled on the filesystem, rather than
automatically enabling it.  Practically, this means that "-O encrypt"
will need to be included in MKFS_OPTIONS when running xfstests with the
test_dummy_encryption mount option.  (ext4/053 also needs an update.)

Moreover, as long as the preconditions for test_dummy_encryption are
being tightened anyway, take the opportunity to start rejecting it when
!CONFIG_FS_ENCRYPTION rather than ignoring it.

The motivation for requiring the encrypt feature flag is that:

- Having the filesystem auto-enable feature flags is problematic, as it
  bypasses the usual sanity checks.  The specific issue which came up
  recently is that in kernel versions where ext4 supports casefold but
  not encrypt+casefold (v5.1 through v5.10), the kernel will happily add
  the encrypt flag to a filesystem that has the casefold flag, making it
  unmountable -- but only for subsequent mounts, not the initial one.
  This confused the casefold support detection in xfstests, causing
  generic/556 to fail rather than be skipped.

- The xfstests-bld test runners (kvm-xfstests et al.) already use the
  required mkfs flag, so they will not be affected by this change.  Only
  users of test_dummy_encryption alone will be affected.  But, this
  option has always been for testing only, so it should be fine to
  require that the few users of this option update their test scripts.

- f2fs already requires it (for its equivalent feature flag).

Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Link: https://lore.kernel.org/r/20220519204437.61645-1-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: IP30: Remove incorrect `cpu_has_fpu' override

commit f44b3e74c33fe04defeff24ebcae98c3bcc5b285 upstream.

Remove unsupported forcing of `cpu_has_fpu' to 1, which makes the `nofpu'
kernel parameter non-functional, and also causes a link error:

ld: arch/mips/kernel/traps.o: in function `trap_init':
./arch/mips/include/asm/msa.h:(.init.text+0x348): undefined reference to `handle_fpe'
ld: ./arch/mips/include/asm/msa.h:(.init.text+0x354): undefined reference to `handle_fpe'
ld: ./arch/mips/include/asm/msa.h:(.init.text+0x360): undefined reference to `handle_fpe'

where the CONFIG_MIPS_FP_SUPPORT configuration option has been disabled.

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Reported-by: Stephen Zhang <starzhangzsd@gmail.com>
Fixes: 7505576d1c1a ("MIPS: add support for SGI Octane (IP30)")
Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: IP27: Remove incorrect `cpu_has_fpu' override

commit 424c3781dd1cb401857585331eaaa425a13f2429 upstream.

Remove unsupported forcing of `cpu_has_fpu' to 1, which makes the `nofpu'
kernel parameter non-functional, and also causes a link error:

ld: arch/mips/kernel/traps.o: in function `trap_init':
./arch/mips/include/asm/msa.h:(.init.text+0x348): undefined reference to `handle_fpe'
ld: ./arch/mips/include/asm/msa.h:(.init.text+0x354): undefined reference to `handle_fpe'
ld: ./arch/mips/include/asm/msa.h:(.init.text+0x360): undefined reference to `handle_fpe'

where the CONFIG_MIPS_FP_SUPPORT configuration option has been disabled.

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Reported-by: Stephen Zhang <starzhangzsd@gmail.com>
Fixes: 0ebb2f4159af ("MIPS: IP27: Update/restructure CPU overrides")
Cc: stable@vger.kernel.org # v4.2+
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/rxe: Generate a completion for unsupported/invalid opcode

commit 2f917af777011c88e977b9b9a5d00b280d3a59ce upstream.

Current rxe_requester() doesn't generate a completion when processing an
unsupported/invalid opcode. If rxe driver doesn't support a new opcode
(e.g. RDMA Atomic Write) and RDMA library supports it, an application
using the new opcode can reproduce this issue. Fix the issue by calling
"goto err;".

Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20220410113513.27537-1-yangx.jy@fujitsu.com
Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/hns: Remove the num_cqc_timer variable

commit db5dfbf5b201df65c1f5332c4d9d5e7c2f42396b upstream.

The bt number of cqc_timer of HIP09 increases compared with that of HIP08.
Therefore, cqc_timer_bt_num and num_cqc_timer do not match. As a result,
the driver may fail to allocate cqc_timer. So the driver needs to uniquely
uses cqc_timer_bt_num to represent the bt number of cqc_timer.

Fixes: 0e40dc2f70cd ("RDMA/hns: Add timer allocation support for hip08")
Link: https://lore.kernel.org/r/20220429093545.58070-1-liangwenpeng@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: delete rtw_wx_read/write32()

commit 4d0cc9e0e53e9946d7b8dc58279c62dfa7a2191b upstream.

These debugging tools let you call:

status = usb_control_msg_recv/send(udev, 0, REALTEK_USB_VENQT_CMD_REQ,
      REALTEK_USB_VENQT_READ/WRITE, value,
      REALTEK_USB_VENQT_CMD_IDX, io_buf,
      size, RTW_USB_CONTROL_MSG_TIMEOUT,
      GFP_KERNEL);

with a user controlled "value" in the 0-0xffff range.  It's not a valid
API.

Fixes: 2b42bd58b321 ("staging: r8188eu: introduce new os_dep dir for RTL8188eu driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YoXS4OaD1oauPvmj@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "random: use static branch for crng_ready()"

This reverts upstream commit f5bda35fba615ace70a656d4700423fa6c9bebee
from stable. It's not essential and will take some time during 5.19 to
work out properly.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

list: test: Add a test for list_is_head()

commit 37dc573c0a547e1aed0c9abb480fab797bd3833f upstream.

list_is_head() was added recently[1], and didn't have a KUnit test. The
implementation is trivial, so it's not a particularly exciting test, but
it'd be nice to get back to full coverage of the list functions.

[1]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/include/linux/list.h?id=0425473037db40d9e322631f2d4dc6ef51f97e88

Signed-off-by: David Gow <davidgow@google.com>
Acked-by: Daniel Latypov <dlatypov@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kseltest/cgroup: Make test_stress.sh work if run interactively

commit 213adc63dfbcdff9a0c19ec1f2681fda9c05cf6d upstream.

Commit 54de76c01239 ("kselftest/cgroup: fix test_stress.sh to use OUTPUT
dir") changes the test_core command path from . to $OUTPUT. However,
variable OUTPUT may not be defined if the command is run interactively.
Fix that by using ${OUTPUT:-.} to cover both cases.

Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ipa: fix page free in ipa_endpoint_replenish_one()

commit 70132763d5d2e94cd185e3aa92ac6a3ba89068fa upstream.

Currently the (possibly compound) pages used for receive buffers are
freed using __free_pages().  But according to this comment above the
definition of that function, that's wrong:
    If you want to use the page's reference count to decide
    when to free the allocation, you should allocate a compound
    page, and use put_page() instead of __free_pages().

Convert the call to __free_pages() in ipa_endpoint_replenish_one()
to use put_page() instead.

Fixes: 6a606b90153b8 ("net: ipa: allocate transaction in replenish loop")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ipa: fix page free in ipa_endpoint_trans_release()

commit 155c0c90bca918de6e4327275dfc1d97fd604115 upstream.

Currently the (possibly compound) page used for receive buffers are
freed using __free_pages().  But according to this comment above the
definition of that function, that's wrong:
    If you want to use the page's reference count to decide when
    to free the allocation, you should allocate a compound page,
    and use put_page() instead of __free_pages().

Convert the call to __free_pages() in ipa_endpoint_trans_release()
to use put_page() instead.

Fixes: ed23f02680caa ("net: ipa: define per-endpoint receive buffer size")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phy: qcom-qmp: fix reset-controller leak on probe errors

commit 4d2900f20edfe541f75756a00deeb2ffe7c66bc1 upstream.

Make sure to release the lane reset controller in case of a late probe
error (e.g. probe deferral).

Note that due to the reset controller being defined in devicetree in
"lane" child nodes, devm_reset_control_get_exclusive() cannot be used
directly.

Fixes: e78f3d15e115 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets")
Cc: stable@vger.kernel.org # 4.12
Cc: Vivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220427063243.32576-3-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

coresight: core: Fix coresight device probe failure issue

commit 8c1d3f79d9ca48e406b78e90e94cf09a8c076bf2 upstream.

It is possibe that probe failure issue happens when the device
and its child_device's probe happens at the same time.
In coresight_make_links, has_conns_grp is true for parent, but
has_conns_grp is false for child device as has_conns_grp is set
to true in coresight_create_conns_sysfs_group. The probe of parent
device will fail at this condition. Add has_conns_grp check for
child device before make the links and make the process from
device_register to connection_create be atomic to avoid this
probe failure issue.

Cc: stable@vger.kernel.org
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Suggested-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Link: https://lore.kernel.org/r/20220309142206.15632-1-quic_jinlmao@quicinc.com
[ Added Cc stable ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blk-iolatency: Fix inflight count imbalances and IO hangs on offline

commit 8a177a36da6c54c98b8685d4f914cb3637d53c0d upstream.

iolatency needs to track the number of inflight IOs per cgroup. As this
tracking can be expensive, it is disabled when no cgroup has iolatency
configured for the device. To ensure that the inflight counters stay
balanced, iolatency_set_limit() freezes the request_queue while manipulating
the enabled counter, which ensures that no IO is in flight and thus all
counters are zero.

Unfortunately, iolatency_set_limit() isn't the only place where the enabled
counter is manipulated. iolatency_pd_offline() can also dec the counter and
trigger disabling. As this disabling happens without freezing the q, this
can easily happen while some IOs are in flight and thus leak the counts.

This can be easily demonstrated by turning on iolatency on an one empty
cgroup while IOs are in flight in other cgroups and then removing the
cgroup. Note that iolatency shouldn't have been enabled elsewhere in the
system to ensure that removing the cgroup disables iolatency for the whole
device.

The following keeps flipping on and off iolatency on sda:

  echo +io > /sys/fs/cgroup/cgroup.subtree_control
  while true; do
      mkdir -p /sys/fs/cgroup/test
      echo '8:0 target=100000' > /sys/fs/cgroup/test/io.latency
      sleep 1
      rmdir /sys/fs/cgroup/test
      sleep 1
  done

and there's concurrent fio generating direct rand reads:

  fio --name test --filename=/dev/sda --direct=1 --rw=randread \
      --runtime=600 --time_based --iodepth=256 --numjobs=4 --bs=4k

while monitoring with the following drgn script:

  while True:
    for css in css_for_each_descendant_pre(prog['blkcg_root'].css.address_of_()):
        for pos in hlist_for_each(container_of(css, 'struct blkcg', 'css').blkg_list):
            blkg = container_of(pos, 'struct blkcg_gq', 'blkcg_node')
            pd = blkg.pd[prog['blkcg_policy_iolatency'].plid]
            if pd.value_() == 0:
                continue
            iolat = container_of(pd, 'struct iolatency_grp', 'pd')
            inflight = iolat.rq_wait.inflight.counter.value_()
            if inflight:
                print(f'inflight={inflight} {disk_name(blkg.q.disk).decode("utf-8")} '
                      f'{cgroup_path(css.cgroup).decode("utf-8")}')
    time.sleep(1)

The monitoring output looks like the following:

  inflight=1 sda /user.slice
  inflight=1 sda /user.slice
  ...
  inflight=14 sda /user.slice
  inflight=13 sda /user.slice
  inflight=17 sda /user.slice
  inflight=15 sda /user.slice
  inflight=18 sda /user.slice
  inflight=17 sda /user.slice
  inflight=20 sda /user.slice
  inflight=19 sda /user.slice <- fio stopped, inflight stuck at 19
  inflight=19 sda /user.slice
  inflight=19 sda /user.slice

If a cgroup with stuck inflight ends up getting throttled, the throttled IOs
will never get issued as there's no completion event to wake it up leading
to an indefinite hang.

This patch fixes the bug by unifying enable handling into a work item which
is automatically kicked off from iolatency_set_min_lat_nsec() which is
called from both iolatency_set_limit() and iolatency_pd_offline() paths.
Punting to a work item is necessary as iolatency_pd_offline() is called
under spinlocks while freezing a request_queue requires a sleepable context.

This also simplifies the code reducing LOC sans the comments and avoids the
unnecessary freezes which were happening whenever a cgroup's latency target
is newly set or cleared.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Liu Bo <bo.liu@linux.alibaba.com>
Fixes: 8c772a9bfc7c ("blk-iolatency: fix IO hang due to negative inflight counter")
Cc: stable@vger.kernel.org # v5.0+
Link: https://lore.kernel.org/r/Yn9ScX6Nx2qIiQQi@slm.duckdns.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vdpasim: allow to enable a vq repeatedly

commit 242436973831aa97e8ce19533c6c912ea8def31b upstream.

Code must be resilient to enable a queue many times.

At the moment the queue is resetting so it's definitely not the expected
behavior.

v2: set vq->ready = 0 at disable.

Fixes: 2c53d0f64c06 ("vdpasim: vDPA device simulator")
Cc: stable@vger.kernel.org
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20220519145919.772896-1-eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: gpio: altera: correct interrupt-cells

commit 3a21c3ac93aff7b4522b152399df8f6a041df56d upstream.

update documentation to correctly state the interrupt-cells to be 2.

Cc: stable@vger.kernel.org
Fixes: 4fd9bbc6e071 ("drivers/gpio: Altera soft IP GPIO driver devicetree binding")
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

docs/conf.py: Cope with removal of language=None in Sphinx 5.0.0

commit 627f01eab93d8671d4e4afee9b148f9998d20e7c upstream.

One of the changes in Sphinx 5.0.0 [1] says [sic]:

    5.0.0 final

     - #10474: language does not accept None as it value.
       The default value of language becomes to 'en' now.

[1]: https://www.sphinx-doc.org/en/master/changes.html#release-5-0-0-released-may-30-2022

It results in a new warning from Sphinx 5.0.0 [sic]:

    WARNING: Invalid configuration value found: 'language = None'.
    Update your configuration to a valid langauge code. Falling
    back to 'en' (English).

Silence the warning by using 'en'.
It works with all the Sphinx versions required for building
kernel documentation (1.7.9 or later).

Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/r/bd0c2ddc-2401-03cb-4526-79ca664e1cbe@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SMB3: EBADF/EIO errors in rename/open caused by race condition in smb2_compound_op

commit 0a55cf74ffb5d004b93647e4389096880ce37d6b upstream.

There is a race condition in smb2_compound_op:

after_close:
num_rqst++;

if (cfile) {
cifsFileInfo_put(cfile); // sends SMB2_CLOSE to the server
cfile = NULL;

This is triggered by smb2_query_path_info operation that happens during
revalidate_dentry. In smb2_query_path_info, get_readable_path is called to
load the cfile, increasing the reference counter. If in the meantime, this
reference becomes the very last, this call to cifsFileInfo_put(cfile) will
trigger a SMB2_CLOSE request sent to the server just before sending this compound
request – and so then the compound request fails either with EBADF/EIO depending
on the timing at the server, because the handle is already closed.

In the first scenario, the race seems to be happening between smb2_query_path_info
triggered by the rename operation, and between “cleanup” of asynchronous writes – while
fsync(fd) likely waits for the asynchronous writes to complete, releasing the writeback
structures can happen after the close(fd) call. So the EBADF/EIO errors will pop up if
the timing is such that:
1) There are still outstanding references after close(fd) in the writeback structures
2) smb2_query_path_info successfully fetches the cfile, increasing the refcounter by 1
3) All writeback structures release the same cfile, reducing refcounter to 1
4) smb2_compound_op is called with that cfile

In the second scenario, the race seems to be similar – here open triggers the
smb2_query_path_info operation, and if all other threads in the meantime decrease the
refcounter to 1 similarly to the first scenario, again SMB2_CLOSE will be sent to the
server just before issuing the compound request. This case is harder to reproduce.

See https://bugzilla.samba.org/show_bug.cgi?id=15051

Cc: stable@vger.kernel.org
Fixes: 8de9e86c67ba ("cifs: create a helper to find a writeable handle by path name")
Signed-off-by: Ondrej Hubsch <ohubsch@purestorage.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: pxa: maybe fix gpio lookup tables

commit 2672a4bff6c03a20d5ae460a091f67ee782c3eff upstream.

From inspection I found a couple of GPIO lookups that are
listed with device "gpio-pxa", but actually have a number
from a different gpio controller.

Try to rectify that here, with a guess of what the actual
device name is.

Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: s5pv210: Remove spi-cs-high on panel in Aries

commit 096f58507374e1293a9e9cff8a1ccd5f37780a20 upstream.

Since commit 766c6b63aa04 ("spi: fix client driver breakages when using
GPIO descriptors"), the panel has been blank due to an inverted CS GPIO.
In order to correct this, drop the spi-cs-high from the panel SPI device.

Fixes: 766c6b63aa04 ("spi: fix client driver breakages when using GPIO descriptors")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Link: https://lore.kernel.org/r/CY4PR04MB05670C771062570E911AF3B4CB1C9@CY4PR04MB0567.namprd04.prod.outlook.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phy: qcom-qmp: fix struct clk leak on probe errors

commit f0a4bc38a12f5a0cc5ad68670d9480e91e6a94df upstream.

Make sure to release the pipe clock reference in case of a late probe
error (e.g. probe deferral).

Fixes: e78f3d15e115 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets")
Cc: stable@vger.kernel.org # 4.12
Cc: Vivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220427063243.32576-2-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: tegra: Add missing reset deassertion

commit 23a43cc437e747473d5f8f98b4fe189fb5c433b7 upstream.

Commit 4782c0a5dd88 ("clk: tegra: Don't deassert reset on enabling
clocks") removed deassertion of reset lines when enabling peripheral
clocks. This breaks the initialization of the DFLL driver which relied
on this behaviour.

Fix this problem by adding explicit deassert/assert requests to the
driver. Tested on Google Pixel C.

Cc: stable@vger.kernel.org
Fixes: 4782c0a5dd88 ("clk: tegra: Don't deassert reset on enabling clocks")
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: tegra: Add missing DFLL reset on Tegra210

commit 0017f2c856e21bb900be88469e15dac4f41f4065 upstream.

Commit 4782c0a5dd88 ("clk: tegra: Don't deassert reset on enabling
clocks") removed deassertion of reset lines when enabling peripheral
clocks. This breaks the initialization of the DFLL driver which relied
on this behaviour.

In order to be able to fix this, add the corresponding reset to the DT.
Tested on Google Pixel C.

Cc: stable@vger.kernel.org
Fixes: 4782c0a5dd88 ("clk: tegra: Don't deassert reset on enabling clocks")
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: qcom: ipq8074: fix the sleep clock frequency

commit f607dd767f5d6800ffbdce5b99ba81763b023781 upstream.

Sleep clock frequency should be 32768Hz. Lets fix it.

Cc: stable@vger.kernel.org
Fixes: 41dac73e243d ("arm64: dts: Add ipq8074 SoC and HK01 board support")
Link: https://lore.kernel.org/all/e2a447f8-6024-0369-f698-2027b6edcf9e@codeaurora.org/
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1644581655-11568-1-git-send-email-quic_kathirav@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gma500: fix an incorrect NULL check on list iterator

commit bdef417d84536715145f6dc9cc3275c46f26295a upstream.

The bug is here:
return crtc;

The list iterator value 'crtc' will *always* be set and non-NULL by
list_for_each_entry(), so it is incorrect to assume that the iterator
value will be NULL if the list is empty or no element is found.

To fix the bug, return 'crtc' when found, otherwise return NULL.

Cc: stable@vger.kernel.org
fixes: 89c78134cc54d ("gma500: Add Poulsbo support")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220327052028.2013-1-xiam0nd.tong@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tilcdc: tilcdc_external: fix an incorrect NULL check on list iterator

commit 8b917cbe38e9b0d002492477a9fc2bfee2412ce4 upstream.

The bug is here:
if (!encoder) {

The list iterator value 'encoder' will *always* be set and non-NULL
by list_for_each_entry(), so it is incorrect to assume that the
iterator value will be NULL if the list is empty or no element
is found.

To fix the bug, use a new variable 'iter' as the list iterator,
while use the original variable 'encoder' as a dedicated pointer
to point to the found element.

Cc: stable@vger.kernel.org
Fixes: ec9eab097a500 ("drm/tilcdc: Add drm bridge support for attaching drm bridge drivers")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
Tested-by: Jyri Sarha <jyri.sarha@iki.fi>
Signed-off-by: Jyri Sarha <jyri.sarha@iki.fi>
Link: https://patchwork.freedesktop.org/patch/msgid/20220327061516.5076-1-xiam0nd.tong@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: pch: don't overwrite xmit->buf[0] by x_char

commit d9f3af4fbb1d955bbaf872d9e76502f6e3e803cb upstream.

When x_char is to be sent, the TX path overwrites whatever is in the
circular buffer at offset 0 with x_char and sends it using
pch_uart_hal_write(). I don't understand how this was supposed to work
if xmit->buf[0] already contained some character. It must have been
lost.

Remove this whole pop_tx_x() concept and do the work directly in the
callers. (Without printing anything using dev_dbg().)

Cc: <stable@vger.kernel.org>
Fixes: 3c6a483275f4 (Serial: EG20T: add PCH_UART driver)
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220503080808.28332-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bcache: avoid journal no-space deadlock by reserving 1 journal bucket

commit 32feee36c30ea06e38ccb8ae6e5c44c6eec790a6 upstream.

The journal no-space deadlock was reported time to time. Such deadlock
can happen in the following situation.

When all journal buckets are fully filled by active jset with heavy
write I/O load, the cache set registration (after a reboot) will load
all active jsets and inserting them into the btree again (which is
called journal replay). If a journaled bkey is inserted into a btree
node and results btree node split, new journal request might be
triggered. For example, the btree grows one more level after the node
split, then the root node record in cache device super block will be
upgrade by bch_journal_meta() from bch_btree_set_root(). But there is no
space in journal buckets, the journal replay has to wait for new journal
bucket to be reclaimed after at least one journal bucket replayed. This
is one example that how the journal no-space deadlock happens.

The solution to avoid the deadlock is to reserve 1 journal bucket in
run time, and only permit the reserved journal bucket to be used during
cache set registration procedure for things like journal replay. Then
the journal space will never be fully filled, there is no chance for
journal no-space deadlock to happen anymore.

This patch adds a new member "bool do_reserve" in struct journal, it is
inititalized to 0 (false) when struct journal is allocated, and set to
1 (true) by bch_journal_space_reserve() when all initialization done in
run_cache_set(). In the run time when journal_reclaim() tries to
allocate a new journal bucket, free_journal_buckets() is called to check
whether there are enough free journal buckets to use. If there is only
1 free journal bucket and journal->do_reserve is 1 (true), the last
bucket is reserved and free_journal_buckets() will return 0 to indicate
no free journal bucket. Then journal_reclaim() will give up, and try
next time to see whetheer there is free journal bucket to allocate. By
this method, there is always 1 jouranl bucket reserved in run time.

During the cache set registration, journal->do_reserve is 0 (false), so
the reserved journal bucket can be used to avoid the no-space deadlock.

Reported-by: Nikhil Kshirsagar <nkshirsagar@gmail.com>
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220524102336.10684-5-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bcache: remove incremental dirty sector counting for bch_sectors_dirty_init()

commit 80db4e4707e78cb22287da7d058d7274bd4cb370 upstream.

After making bch_sectors_dirty_init() being multithreaded, the existing
incremental dirty sector counting in bch_root_node_dirty_init() doesn't
release btree occupation after iterating 500000 (INIT_KEYS_EACH_TIME)
bkeys. Because a read lock is added on btree root node to prevent the
btree to be split during the dirty sectors counting, other I/O requester
has no chance to gain the write lock even restart bcache_btree().

That is to say, the incremental dirty sectors counting is incompatible
to the multhreaded bch_sectors_dirty_init(). We have to choose one and
drop another one.

In my testing, with 512 bytes random writes, I generate 1.2T dirty data
and a btree with 400K nodes. With single thread and incremental dirty
sectors counting, it takes 30+ minites to register the backing device.
And with multithreaded dirty sectors counting, the backing device
registration can be accomplished within 2 minutes.

The 30+ minutes V.S. 2- minutes difference makes me decide to keep
multithreaded bch_sectors_dirty_init() and drop the incremental dirty
sectors counting. This is what this patch does.

But INIT_KEYS_EACH_TIME is kept, in sectors_dirty_init_fn() the CPU
will be released by cond_resched() after every INIT_KEYS_EACH_TIME keys
iterated. This is to avoid the watchdog reports a bogus soft lockup
warning.

Fixes: b144e45fc576 ("bcache: make bch_sectors_dirty_init() to be multithreaded")
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220524102336.10684-4-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bcache: improve multithreaded bch_sectors_dirty_init()

commit 4dc34ae1b45fe26e772a44379f936c72623dd407 upstream.

Commit b144e45fc576 ("bcache: make bch_sectors_dirty_init() to be
multithreaded") makes bch_sectors_dirty_init() to be much faster
when counting dirty sectors by iterating all dirty keys in the btree.
But it isn't in ideal shape yet, still can be improved.

This patch does the following changes to improve current parallel dirty
keys iteration on the btree,
- Add read lock to root node when multiple threads iterating the btree,
  to prevent the root node gets split by I/Os from other registered
  bcache devices.
- Remove local variable "char name[32]" and generate kernel thread name
  string directly when calling kthread_run().
- Allocate "struct bch_dirty_init_state state" directly on stack and
  avoid the unnecessary dynamic memory allocation for it.
- Decrease BCH_DIRTY_INIT_THRD_MAX from 64 to 12 which is enough indeed.
- Increase &state->started to count created kernel thread after it
  succeeds to create.
- When wait for all dirty key counting threads to finish, use
  wait_event() to replace wait_event_interruptible().

With the above changes, the code is more clear, and some potential error
conditions are avoided.

Fixes: b144e45fc576 ("bcache: make bch_sectors_dirty_init() to be multithreaded")
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220524102336.10684-3-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bcache: improve multithreaded bch_btree_check()

commit 622536443b6731ec82c563aae7807165adbe9178 upstream.

Commit 8e7102273f59 ("bcache: make bch_btree_check() to be
multithreaded") makes bch_btree_check() to be much faster when checking
all btree nodes during cache device registration. But it isn't in ideal
shap yet, still can be improved.

This patch does the following thing to improve current parallel btree
nodes check by multiple threads in bch_btree_check(),
- Add read lock to root node while checking all the btree nodes with
  multiple threads. Although currently it is not mandatory but it is
  good to have a read lock in code logic.
- Remove local variable 'char name[32]', and generate kernel thread name
  string directly when calling kthread_run().
- Allocate local variable "struct btree_check_state check_state" on the
  stack and avoid unnecessary dynamic memory allocation for it.
- Reduce BCH_BTR_CHKTHREAD_MAX from 64 to 12 which is enough indeed.
- Increase check_state->started to count created kernel thread after it
  succeeds to create.
- When wait for all checking kernel threads to finish, use wait_event()
  to replace wait_event_interruptible().

With this change, the code is more clear, and some potential error
conditions are avoided.

Fixes: 8e7102273f59 ("bcache: make bch_btree_check() to be multithreaded")
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220524102336.10684-2-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

stm: ltdc: fix two incorrect NULL checks on list iterator

commit 2e6c86be0e57079d1fb6c7c7e5423db096d0548a upstream.

The two bugs are here:
if (encoder) {
if (bridge && bridge->timings)

The list iterator value 'encoder/bridge' will *always* be set and
non-NULL by drm_for_each_encoder()/list_for_each_entry(), so it is
incorrect to assume that the iterator value will be NULL if the
list is empty or no element is found.

To fix the bug, use a new variable '*_iter' as the list iterator,
while use the old variable 'encoder/bridge' as a dedicated pointer
to point to the found element.

Cc: stable@vger.kernel.org
Fixes: 99e360442f223 ("drm/stm: Fix bus_flags handling")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Acked-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220327055355.3808-1-xiam0nd.tong@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

carl9170: tx: fix an incorrect use of list iterator

commit 54a6f29522da3c914da30e50721dedf51046449a upstream.

If the previous list_for_each_entry_continue_rcu() don't exit early
(no goto hit inside the loop), the iterator 'cvif' after the loop
will be a bogus pointer to an invalid structure object containing
the HEAD (&ar->vif_list). As a result, the use of 'cvif' after that
will lead to a invalid memory access (i.e., 'cvif->id': the invalid
pointer dereference when return back to/after the callsite in the
carl9170_update_beacon()).

The original intention should have been to return the valid 'cvif'
when found in list, NULL otherwise. So just return NULL when no
entry found, to fix this bug.

Cc: stable@vger.kernel.org
Fixes: 1f1d9654e183c ("carl9170: refactor carl9170_update_beacon")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220328122820.1004-1-xiam0nd.tong@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: rt5514: Fix event generation for "DSP Voice Wake Up" control

commit 4213ff556740bb45e2d9ff0f50d056c4e7dd0921 upstream.

The driver has a custom put function for "DSP Voice Wake Up" which does
not generate event notifications on change, instead returning 0. Since we
already exit early in the case that there is no change this can be fixed
by unconditionally returning 1 at the end of the function.

Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220428162444.3883147-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtl818x: Prevent using not initialized queues

commit 746285cf81dc19502ab238249d75f5990bd2d231 upstream.

Using not existing queues can panic the kernel with rtl8180/rtl8185 cards.
Ignore the skb priority for those cards, they only have one tx queue. Pierre
Asselin (pa@panix.com) reported the kernel crash in the Gentoo forum:

https://forums.gentoo.org/viewtopic-t-1147832-postdays-0-postorder-asc-start-25.html

He also confirmed that this patch fixes the issue. In summary this happened:

After updating wpa_supplicant from 2.9 to 2.10 the kernel crashed with a
"divide error: 0000" when connecting to an AP. Control port tx now tries to
use IEEE80211_AC_VO for the priority, which wpa_supplicants starts to use in
2.10.

Since only the rtl8187se part of the driver supports QoS, the priority
of the skb is set to IEEE80211_AC_BE (2) by mac80211 for rtl8180/rtl8185
cards.

rtl8180 is then unconditionally reading out the priority and finally crashes on
drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c line 544 without this
patch:
idx = (ring->idx + skb_queue_len(&ring->queue)) % ring->entries

"ring->entries" is zero for rtl8180/rtl8185 cards, tx_ring[2] never got
initialized.

Cc: stable@vger.kernel.org
Reported-by: pa@panix.com
Tested-by: pa@panix.com
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220422145228.7567-1-alexander@wetzel-home.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xtensa/simdisk: fix proc_read_simdisk()

commit b011946d039d66bbc7102137e98cc67e1356aa87 upstream.

The commit a69755b18774 ("xtensa simdisk: switch to proc_create_data()")
split read operation into two parts, first retrieving the path when it's
non-null and second retrieving the trailing '\n'. However when the path
is non-null the first simple_read_from_buffer updates ppos, and the
second simple_read_from_buffer returns 0 if ppos is greater than 1 (i.e.
almost always). As a result reading from that proc file is almost always
empty.

Fix it by making a temporary copy of the path with the trailing '\n' and
using simple_read_from_buffer on that copy.

Cc: stable@vger.kernel.org
Fixes: a69755b18774 ("xtensa simdisk: switch to proc_create_data()")
Signed-off-by: Yi Yang <yiyang13@huawei.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/memremap: fix missing call to untrack_pfn() in pagemap_range()

commit a04e1928e2ead144dc2f369768bc0a0f3110af89 upstream.

We forget to call untrack_pfn() to pair with track_pfn_remap() when range
is not allowed to hotplug. Fix it by jump err_kasan.

Link: https://lkml.kernel.org/r/20220531122643.25249-1-linmiaohe@huawei.com
Fixes: bca3feaa0764 ("mm/memory_hotplug: prevalidate the address range being added with platform")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hugetlb: fix huge_pmd_unshare address update

commit 48381273f8734d28ef56a5bdf1966dd8530111bc upstream.

The routine huge_pmd_unshare() is passed a pointer to an address
associated with an area which may be unshared.  If unshare is successful
this address is updated to 'optimize' callers iterating over huge page
addresses.  For the optimization to work correctly, address should be
updated to the last huge page in the unmapped/unshared area.  However, in
the common case where the passed address is PUD_SIZE aligned, the address
is incorrectly updated to the address of the preceding huge page.  That
wastes CPU cycles as the unmapped/unshared range is scanned twice.

Link: https://lkml.kernel.org/r/20220524205003.126184-1-mike.kravetz@oracle.com
Fixes: 39dde65c9940 ("shared page table for hugetlb page")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nodemask.h: fix compilation error with GCC12

commit 37462a920392cb86541650a6f4121155f11f1199 upstream.

With gcc version 12.0.1 20220401 (Red Hat 12.0.1-0), building with
defconfig results in the following compilation error:

|   CC      mm/swapfile.o
| mm/swapfile.c: In function `setup_swap_info':
| mm/swapfile.c:2291:47: error: array subscript -1 is below array bounds
|  of `struct plist_node[]' [-Werror=array-bounds]
|  2291 |                                 p->avail_lists[i].prio = 1;
|       |                                 ~~~~~~~~~~~~~~^~~
| In file included from mm/swapfile.c:16:
| ./include/linux/swap.h:292:27: note: while referencing `avail_lists'
|   292 |         struct plist_node avail_lists[]; /*
|       |                           ^~~~~~~~~~~

This is due to the compiler detecting that the mask in
node_states[__state] could theoretically be zero, which would lead to
first_node() returning -1 through find_first_bit.

I believe that the warning/error is legitimate.  I first tried adding a
test to check that the node mask is not emtpy, since a similar test exists
in the case where MAX_NUMNODES == 1.

However, adding the if statement causes other warnings to appear in
for_each_cpu_node_but, because it introduces a dangling else ambiguity.
And unfortunately, GCC is not smart enough to detect that the added test
makes the case where (node) == -1 impossible, so it still complains with
the same message.

This is why I settled on replacing that with a harmless, but relatively
useless (node) >= 0 test.  Based on the warning for the dangling else, I
also decided to fix the case where MAX_NUMNODES == 1 by moving the
condition inside the for loop.  It will still only be tested once.  This
ensures that the meaning of an else following for_each_node_mask or
derivatives would not silently have a different meaning depending on the
configuration.

Link: https://lkml.kernel.org/r/20220414150855.2407137-3-dinechin@redhat.com
Signed-off-by: Christophe de Dinechin <christophe@dinechin.org>
Signed-off-by: Christophe de Dinechin <dinechin@redhat.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Ben Segall <bsegall@google.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/page_alloc: always attempt to allocate at least one page during bulk allocation

commit c572e4888ad1be123c1516ec577ad30a700bbec4 upstream.

Peter Pavlisko reported the following problem on kernel bugzilla 216007.

When I try to extract an uncompressed tar archive (2.6 milion
files, 760.3 GiB in size) on newly created (empty) XFS file system,
after first low tens of gigabytes extracted the process hangs in
iowait indefinitely. One CPU core is 100% occupied with iowait,
the other CPU core is idle (on 2-core Intel Celeron G1610T).

It was bisected to c9fa563072e1 ("xfs: use alloc_pages_bulk_array() for
buffers") but XFS is only the messenger.  The problem is that nothing is
waking kswapd to reclaim some pages at a time the PCP lists cannot be
refilled until some reclaim happens.  The bulk allocator checks that there
are some pages in the array and the original intent was that a bulk
allocator did not necessarily need all the requested pages and it was best
to return as quickly as possible.

This was fine for the first user of the API but both NFS and XFS require
the requested number of pages be available before making progress.  Both
could be adjusted to call the page allocator directly if a bulk allocation
fails but it puts a burden on users of the API.  Adjust the semantics to
attempt at least one allocation via __alloc_pages() before returning so
kswapd is woken if necessary.

It was reported via bugzilla that the patch addressed the problem and that
the tar extraction completed successfully.  This may also address bug
215975 but has yet to be confirmed.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216007
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215975
Link: https://lkml.kernel.org/r/20220526091210.GC3441@techsingularity.net
Fixes: 387ba26fb1cb ("mm/page_alloc: add a bulk page allocator")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: <stable@vger.kernel.org> [5.13+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "mm/cma.c: remove redundant cma_mutex lock"

commit 60a60e32cf91169840abcb4a80f0b0df31708ba7 upstream.

This reverts commit a4efc174b382fcdb which introduced a regression issue
that when there're multiple processes allocating dma memory in parallel by
calling dma_alloc_coherent(), it may fail sometimes as follows:

Error log:
cma: cma_alloc: linux,cma: alloc failed, req-size: 148 pages, ret: -16
cma: number of available pages:
3@125+20@172+12@236+4@380+32@736+17@2287+23@2473+20@36076+99@40477+108@40852+44@41108+20@41196+108@41364+108@41620+
108@42900+108@43156+483@44061+1763@45341+1440@47712+20@49324+20@49388+5076@49452+2304@55040+35@58141+20@58220+20@58284+
7188@58348+84@66220+7276@66452+227@74525+6371@75549=> 33161 free of 81920 total pages

When issue happened, we saw there were still 33161 pages (129M) free CMA
memory and a lot available free slots for 148 pages in CMA bitmap that we
want to allocate.

When dumping memory info, we found that there was also ~342M normal
memory, but only 1352K CMA memory left in buddy system while a lot of
pageblocks were isolated.

Memory info log:
Normal free:351096kB min:30000kB low:37500kB high:45000kB reserved_highatomic:0KB
    active_anon:98060kB inactive_anon:98948kB active_file:60864kB inactive_file:31776kB
    unevictable:0kB writepending:0kB present:1048576kB managed:1018328kB mlocked:0kB
    bounce:0kB free_pcp:220kB local_pcp:192kB free_cma:1352kB lowmem_reserve[]: 0 0 0
Normal: 78*4kB (UECI) 1772*8kB (UMECI) 1335*16kB (UMECI) 360*32kB (UMECI) 65*64kB (UMCI)
36*128kB (UMECI) 16*256kB (UMCI) 6*512kB (EI) 8*1024kB (UEI) 4*2048kB (MI) 8*4096kB (EI)
8*8192kB (UI) 3*16384kB (EI) 8*32768kB (M) = 489288kB

The root cause of this issue is that since commit a4efc174b382 ("mm/cma.c:
remove redundant cma_mutex lock"), CMA supports concurrent memory
allocation.  It's possible that the memory range process A trying to alloc
has already been isolated by the allocation of process B during memory
migration.

The problem here is that the memory range isolated during one allocation
by start_isolate_page_range() could be much bigger than the real size we
want to alloc due to the range is aligned to MAX_ORDER_NR_PAGES.

Taking an ARMv7 platform with 1G memory as an example, when
MAX_ORDER_NR_PAGES is big (e.g.  32M with max_order 14) and CMA memory is
relatively small (e.g.  128M), there're only 4 MAX_ORDER slot, then it's
very easy that all CMA memory may have already been isolated by other
processes when one trying to allocate memory using dma_alloc_coherent().
Since current CMA code will only scan one time of whole available CMA
memory, then dma_alloc_coherent() may easy fail due to contention with
other processes.

This patch simply falls back to the original method that using cma_mutex
to make alloc_contig_range() run sequentially to avoid the issue.

Link: https://lkml.kernel.org/r/20220509094551.3596244-1-aisheng.dong@nxp.com
Link: https://lore.kernel.org/all/20220315144521.3810298-2-aisheng.dong@nxp.com/
Fixes: a4efc174b382 ("mm/cma.c: remove redundant cma_mutex lock")
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Lecopzer Chen <lecopzer.chen@mediatek.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org> [5.11+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/dma: Fix iova map result check bug

commit a3884774d731f03d3a3dd4fb70ec2d9341ceb39d upstream.

The data type of the return value of the iommu_map_sg_atomic
is ssize_t, but the data type of iova size is size_t,
e.g. one is int while the other is unsigned int.

When iommu_map_sg_atomic return value is compared with iova size,
it will force the signed int to be converted to unsigned int, if
iova map fails and iommu_map_sg_atomic return error code is less
than 0, then (ret < iova_len) is false, which will to cause not
do free iova, and the master can still successfully get the iova
of map fail, which is not expected.

Therefore, we need to check the return value of iommu_map_sg_atomic
in two cases according to whether it is less than 0.

Fixes: ad8f36e4b6b1 ("iommu: return full error code from iommu_map_sg[_atomic]()")
Signed-off-by: Yunfei Wang <yf.wang@mediatek.com>
Cc: <stable@vger.kernel.org> # 5.15.*
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Link: https://lore.kernel.org/r/20220507085204.16914-1-yf.wang@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/msm: Fix an incorrect NULL check on list iterator

commit 8b9ad480bd1dd25f4ff4854af5685fa334a2f57a upstream.

The bug is here:
if (!iommu || iommu->dev->of_node != spec->np) {

The list iterator value 'iommu' will *always* be set and non-NULL by
list_for_each_entry(), so it is incorrect to assume that the iterator
value will be NULL if the list is empty or no element is found (in fact,
it will point to a invalid structure object containing HEAD).

To fix the bug, use a new value 'iter' as the list iterator, while use
the old value 'iommu' as a dedicated variable to point to the found one,
and remove the unneeded check for 'iommu->dev->of_node != spec->np'
outside the loop.

Cc: stable@vger.kernel.org
Fixes: f78ebca8ff3d6 ("iommu/msm: Add support for generic master bindings")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Link: https://lore.kernel.org/r/20220501132823.12714-1-xiam0nd.tong@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: fix outstanding credits related bugs

commit 376b9133826865568167b4091ef92a68c4622b87 upstream.

outstanding credits must be initialized to 0,
because it means the sum of credits consumed by
in-flight requests.
And outstanding credits must be compared with
total credits in smb2_validate_credit_charge(),
because total credits are the sum of credits
granted by ksmbd.

This patch fix the following error,
while frametest with Windows clients:

Limits exceeding the maximum allowable outstanding requests,
given : 128, pending : 8065

Fixes: b589f5db6d4a ("ksmbd: limits exceeding the maximum allowable outstanding requests")
Cc: stable@vger.kernel.org
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Reported-by: Yufan Chen <wiz.chen@gmail.com>
Tested-by: Yufan Chen <wiz.chen@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ftrace: Clean up hash direct_functions on register failures

commit 7d54c15cb89a29a5f59e5ffc9ee62e6591769ef1 upstream.

We see the following GPF when register_ftrace_direct fails:

[ ] general protection fault, probably for non-canonical address \
  0x200000000000010: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI
[...]
[ ] RIP: 0010:ftrace_find_rec_direct+0x53/0x70
[ ] Code: 48 c1 e0 03 48 03 42 08 48 8b 10 31 c0 48 85 d2 74 [...]
[ ] RSP: 0018:ffffc9000138bc10 EFLAGS: 00010206
[ ] RAX: 0000000000000000 RBX: ffffffff813e0df0 RCX: 000000000000003b
[ ] RDX: 0200000000000000 RSI: 000000000000000c RDI: ffffffff813e0df0
[ ] RBP: ffffffffa00a3000 R08: ffffffff81180ce0 R09: 0000000000000001
[ ] R10: ffffc9000138bc18 R11: 0000000000000001 R12: ffffffff813e0df0
[ ] R13: ffffffff813e0df0 R14: ffff888171b56400 R15: 0000000000000000
[ ] FS:  00007fa9420c7780(0000) GS:ffff888ff6a00000(0000) knlGS:000000000
[ ] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ ] CR2: 000000000770d000 CR3: 0000000107d50003 CR4: 0000000000370ee0
[ ] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ ] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ ] Call Trace:
[ ]  <TASK>
[ ]  register_ftrace_direct+0x54/0x290
[ ]  ? render_sigset_t+0xa0/0xa0
[ ]  bpf_trampoline_update+0x3f5/0x4a0
[ ]  ? 0xffffffffa00a3000
[ ]  bpf_trampoline_link_prog+0xa9/0x140
[ ]  bpf_tracing_prog_attach+0x1dc/0x450
[ ]  bpf_raw_tracepoint_open+0x9a/0x1e0
[ ]  ? find_held_lock+0x2d/0x90
[ ]  ? lock_release+0x150/0x430
[ ]  __sys_bpf+0xbd6/0x2700
[ ]  ? lock_is_held_type+0xd8/0x130
[ ]  __x64_sys_bpf+0x1c/0x20
[ ]  do_syscall_64+0x3a/0x80
[ ]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[ ] RIP: 0033:0x7fa9421defa9
[ ] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 9 f8 [...]
[ ] RSP: 002b:00007ffed743bd78 EFLAGS: 00000246 ORIG_RAX: 0000000000000141
[ ] RAX: ffffffffffffffda RBX: 00000000069d2480 RCX: 00007fa9421defa9
[ ] RDX: 0000000000000078 RSI: 00007ffed743bd80 RDI: 0000000000000011
[ ] RBP: 00007ffed743be00 R08: 0000000000bb7270 R09: 0000000000000000
[ ] R10: 00000000069da210 R11: 0000000000000246 R12: 0000000000000001
[ ] R13: 00007ffed743c4b0 R14: 00000000069d2480 R15: 0000000000000001
[ ]  </TASK>
[ ] Modules linked in: klp_vm(OK)
[ ] ---[ end trace 0000000000000000 ]---

One way to trigger this is:
  1. load a livepatch that patches kernel function xxx;
  2. run bpftrace -e 'kfunc:xxx {}', this will fail (expected for now);
  3. repeat #2 => gpf.

This is because the entry is added to direct_functions, but not removed.
Fix this by remove the entry from direct_functions when
register_ftrace_direct fails.

Also remove the last trailing space from ftrace.c, so we don't have to
worry about it anymore.

Link: https://lkml.kernel.org/r/20220524170839.900849-1-song@kernel.org
Cc: stable@vger.kernel.org
Fixes: 763e34e74bb7 ("ftrace: Add register_ftrace_direct()")
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kexec_file: drop weak attribute from arch_kexec_apply_relocations[_add]

commit 3e35142ef99fe6b4fe5d834ad43ee13cca10a2dc upstream.

Since commit d1bcae833b32f1 ("ELF: Don't generate unused section
symbols") [1], binutils (v2.36+) started dropping section symbols that
it thought were unused. This isn't an issue in general, but with
kexec_file.c, gcc is placing kexec_arch_apply_relocations[_add] into a
separate .text.unlikely section and the section symbol ".text.unlikely"
is being dropped. Due to this, recordmcount is unable to find a non-weak
symbol in .text.unlikely to generate a relocation record against.

Address this by dropping the weak attribute from these functions.
Instead, follow the existing pattern of having architectures #define the
name of the function they want to override in their headers.

[1] https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=d1bcae833b32f1

[akpm@linux-foundation.org: arch/s390/include/asm/kexec.h needs linux/module.h]
Link: https://lkml.kernel.org/r/20220519091237.676736-1-naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

um: Fix out-of-bounds read in LDT setup

commit 2a4a62a14be1947fa945c5c11ebf67326381a568 upstream.

syscall_stub_data() expects the data_count parameter to be the number of
longs, not bytes.

==================================================================
BUG: KASAN: stack-out-of-bounds in syscall_stub_data+0x70/0xe0
Read of size 128 at addr 000000006411f6f0 by task swapper/1

CPU: 0 PID: 1 Comm: swapper Not tainted 5.18.0+ #18
Call Trace:
  show_stack.cold+0x166/0x2a7
  __dump_stack+0x3a/0x43
  dump_stack_lvl+0x1f/0x27
  print_report.cold+0xdb/0xf81
  kasan_report+0x119/0x1f0
  kasan_check_range+0x3a3/0x440
  memcpy+0x52/0x140
  syscall_stub_data+0x70/0xe0
  write_ldt_entry+0xac/0x190
  init_new_ldt+0x515/0x960
  init_new_context+0x2c4/0x4d0
  mm_init.constprop.0+0x5ed/0x760
  mm_alloc+0x118/0x170
  0x60033f48
  do_one_initcall+0x1d7/0x860
  0x60003e7b
  kernel_init+0x6e/0x3d4
  new_thread_handler+0x1e7/0x2c0

The buggy address belongs to stack of task swapper/1
  and is located at offset 64 in frame:
  init_new_ldt+0x0/0x960

This frame has 2 objects:
  [32, 40) 'addr'
  [64, 80) 'desc'
==================================================================

Fixes: 858259cf7d1c443c83 ("uml: maintain own LDT entries")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: stable@vger.kernel.org
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

um: chan_user: Fix winch_tramp() return value

commit 57ae0b67b747031bc41fb44643aa5344ab58607e upstream.

The previous fix here was only partially correct, it did
result in returning a proper error value in case of error,
but it also clobbered the pid that we need to return from
this function (not just zero for success).

As a result, it returned 0 here, but later this is treated
as a pid and used to kill the process, but since it's now
0 we kill(0, SIGKILL), which makes UML kill itself rather
than just the helper thread.

Fix that and make it more obvious by using a separate
variable for the pid.

Fixes: ccf1236ecac4 ("um: fix error return code in winch_tramp()")
Reported-and-tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

um: Use asm-generic/dma-mapping.h

commit 365719035526e8eda214a1cedb2e1c96e969a0d7 upstream.

If DMA (PCI over virtio) is enabled, then some drivers may
enable CONFIG_DMA_OPS as well, and then we pull in the x86
definition of get_arch_dma_ops(), which uses the dma_ops
symbol, which isn't defined.

Since we don't have real DMA ops nor any kind of IOMMU fix
this in the simplest possible way: pull in the asm-generic
file instead of inheriting the x86 one. It's not clear why
those drivers that do (e.g. VDPA) "select DMA_OPS", and if
they'd even work with this, but chances are nobody will be
wanting to do that anyway, so fixing the build failure is
good enough.

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: upgrade passive scan to active scan on DFS channels after beacon rx

commit b041b7b9de6e1d4362de855ab90f9d03ef323edd upstream.

In client mode, we can't connect to hidden SSID APs or SSIDs not advertised
in beacons on DFS channels, since we're forced to passive scan. Fix this by
sending out a probe request immediately after the first beacon, if active
scan was requested by the user.

Cc: stable@vger.kernel.org
Reported-by: Catrinel Catrinescu <cc@80211.de>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20220420104907.36275-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cfg80211: declare MODULE_FIRMWARE for regulatory.db

commit 7bc7981eeebe1b8e603ad2ffc5e84f4df76920dd upstream.

Add MODULE_FIRMWARE declarations for regulatory.db and
regulatory.db.p7s such that userspace tooling can discover and include
these files.

Cc: stable@vger.kernel.org
Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Link: https://lore.kernel.org/r/20220414125004.267819-1-dimitri.ledkov@canonical.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thermal: devfreq_cooling: use local ops instead of global ops

commit b947769b8f778db130aad834257fcaca25df2edc upstream.

Fix access illegal address problem in following condition:

There are multiple devfreq cooling devices in system, some of them has
EM model but others do not. Energy model ops such as state2power will
append to global devfreq_cooling_ops when the cooling device with
EM model is registered. It makes the cooling device without EM model
also use devfreq_cooling_ops after appending when registered later by
of_devfreq_cooling_register_power() or of_devfreq_cooling_register().

The IPA governor regards the cooling devices without EM model as a power
actor, because they also have energy model ops, and will access illegal
address at dfc->em_pd when execute cdev->ops->get_requested_power,
cdev->ops->state2power or cdev->ops->power2state.

Fixes: 615510fe13bd2 ("thermal: devfreq_cooling: remove old power model and use EM")
Cc: 5.13+ <stable@vger.kernel.org> # 5.13+
Signed-off-by: Kant Fan <kant@allwinnertech.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irqchip: irq-xtensa-mx: fix initial IRQ affinity

commit a255ee29252066d621df5d6b420bf534c6ba5bc0 upstream.

When irq-xtensa-mx chip is used in non-SMP configuration its
irq_set_affinity callback is not called leaving IRQ affinity set empty.
As a result IRQ delivery does not work in that configuration.
Initialize IRQ affinity of the xtensa MX interrupt distributor to CPU 0
for all external IRQ lines.

Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irqchip/armada-370-xp: Do not touch Performance Counter Overflow on A375, A38x, A39x

commit a3d66a76348daf559873f19afc912a2a7c2ccdaf upstream.

Register ARMADA_370_XP_INT_FABRIC_MASK_OFFS is Armada 370 and XP specific
and on new Armada platforms it has different meaning. It does not configure
Performance Counter Overflow interrupt masking. So do not touch this
register on non-A370/XP platforms (A375, A38x and A39x).

Signed-off-by: Pali Rohár <pali@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 28da06dfd9e4 ("irqchip: armada-370-xp: Enable the PMU interrupts")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220425113706.29310-1-pali@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

csky: patch_text: Fixup last cpu should be master

commit 8c4d16471e2babe9bdfe41d6ef724526629696cb upstream.

These patch_text implementations are using stop_machine_cpuslocked
infrastructure with atomic cpu_count. The original idea: When the
master CPU patch_text, the others should wait for it. But current
implementation is using the first CPU as master, which couldn't
guarantee the remaining CPUs are waiting. This patch changes the
last CPU as the master to solve the potential risk.

Fixes: 33e53ae1ce41 ("csky: Add kprobes supported")
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: core: Allows to override the timeout value for ioctl() path

commit 23e09be254f95a5b75cd87f91a4014f3b46dda3f upstream.

Occasionally, user-land applications initiate longer timeout values for certain commands
through ioctl() system call. But so far we are still using a fixed timeout of 10 seconds
in mmc_poll_for_busy() on the ioctl() path, even if a custom timeout is specified in the
userspace application. This patch allows custom timeout values to override this default
timeout values on the ioctl path.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Acked-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220423221623.1074556-3-huobean@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/hfi1: Fix potential integer multiplication overflow errors

commit f93e91a0372c922c20d5bee260b0f43b4b8a1bee upstream.

When multiplying of different types, an overflow is possible even when
storing the result in a larger type. This is because the conversion is
done after the multiplication. So arithmetic overflow and thus in
incorrect value is possible.

Correct an instance of this in the inter packet delay calculation. Fix by
ensuring one of the operands is u64 which will promote the other to u64 as
well ensuring no overflow.

Cc: stable@vger.kernel.org
Fixes: 7724105686e7 ("IB/hfi1: add driver files")
Link: https://lore.kernel.org/r/20220520183712.48973.29855.stgit@awfm-01.cornelisnetworks.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Kconfig: Add option for asm goto w/ tied outputs to workaround clang-13 bug

commit 1aa0e8b144b6474c4914439d232d15bfe883636b upstream.

Add a config option to guard (future) usage of asm_volatile_goto() that
includes "tied outputs", i.e. "+" constraints that specify both an input
and output parameter.  clang-13 has a bug[1] that causes compilation of
such inline asm to fail, and KVM wants to use a "+m" constraint to
implement a uaccess form of CMPXCHG[2].  E.g. the test code fails with

  <stdin>:1:29: error: invalid operand in inline asm: '.long (${1:l}) - .'
  int foo(int *x) { asm goto (".long (%l[bar]) - .\n": "+m"(*x) ::: bar); return *x; bar: return 0; }
                            ^
  <stdin>:1:29: error: unknown token in expression
  <inline asm>:1:9: note: instantiated into assembly here
          .long () - .
                 ^
  2 errors generated.

on clang-13, but passes on gcc (with appropriate asm goto support).  The
bug is fixed in clang-14, but won't be backported to clang-13 as the
changes are too invasive/risky.

gcc also had a similar bug[3], fixed in gcc-11, where gcc failed to
account for its behavior of assigning two numbers to tied outputs (one
for input, one for output) when evaluating symbolic references.

[1] https://github.com/ClangBuiltLinux/linux/issues/1512
[2] https://lore.kernel.org/all/YfMruK8%2F1izZ2VHS@google.com
[3] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98096

Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220202004945.2540433-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ima: remove the IMA_TEMPLATE Kconfig option

commit 891163adf180bc369b2f11c9dfce6d2758d2a5bd upstream.

The original 'ima' measurement list template contains a hash, defined
as 20 bytes, and a null terminated pathname, limited to 255
characters. Other measurement list templates permit both larger hashes
and longer pathnames. When the "ima" template is configured as the
default, a new measurement list template (ima_template=) must be
specified before specifying a larger hash algorithm (ima_hash=) on the
boot command line.

To avoid this boot command line ordering issue, remove the legacy "ima"
template configuration option, allowing it to still be specified on the
boot command line.

The root cause of this issue is that during the processing of ima_hash,
we would try to check whether the hash algorithm is compatible with the
template. If the template is not set at the moment we do the check, we
check the algorithm against the configured default template. If the
default template is "ima", then we reject any hash algorithm other than
sha1 and md5.

For example, if the compiled default template is "ima", and the default
algorithm is sha1 (which is the current default). In the cmdline, we put
in "ima_hash=sha256 ima_template=ima-ng". The expected behavior would be
that ima starts with ima-ng as the template and sha256 as the hash
algorithm. However, during the processing of "ima_hash=",
"ima_template=" has not been processed yet, and hash_setup would check
the configured hash algorithm against the compiled default: ima, and
reject sha256. So at the end, the hash algorithm that is actually used
will be sha1.

With template "ima" removed from the configured default, we ensure that
the default tempalte would at least be "ima-ng" which allows for
basically any hash algorithm.

This change would not break the algorithm compatibility checks for IMA.

Fixes: 4286587dccd43 ("ima: add Kconfig default measurement list template")
Signed-off-by: GUO Zihua <guozihua@huawei.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: coda: Add more H264 levels for CODA960

commit eb2fd187abc878a2dfad46902becb74963473c7d upstream.

Add H264 level 1.0, 4.1, 4.2 to the list of supported formats.
While the hardware does not fully support these levels, it does support
most of them. The constraints on frame size and pixel formats already
cover the limitation.

This fixes negotiation of level on GStreamer 1.17.1.

Cc: stable@vger.kernel.org
Fixes: 42a68012e67c2 ("media: coda: add read-only h.264 decoder profile/level controls")
Suggested-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: coda: Fix reported H264 profile

commit 7110c08ea71953a7fc342f0b76046f72442cf26c upstream.

The CODA960 manual states that ASO/FMO features of baseline are not
supported, so for this reason this driver should only report
constrained baseline support.

This fixes negotiation issue with constrained baseline content
on GStreamer 1.17.1.

ASO/FMO features are unsupported for the encoder and untested for the
decoder because there is currently no userspace support. Neither GStreamer
parsers nor FFMPEG parsers support ASO/FMO.

Cc: stable@vger.kernel.org
Fixes: 42a68012e67c2 ("media: coda: add read-only h.264 decoder profile/level controls")
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Pascal Speck <kernel@iktek.de>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N

commit 0a8e98305f63deaf0a799d5cf5532cc83af035d1 upstream.

Since commit dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to
check correct value") buffered writes fail on S29GL064N. This is
because, on S29GL064N, reads return 0xFF at the end of DQ polling for
write completion, where as, chip_good() check expects actual data
written to the last location to be returned post DQ polling completion.
Fix is to revert to using chip_good() for S29GL064N which only checks
for DQ lines to settle down to determine write completion.

Link: https://lore.kernel.org/r/b687c259-6413-26c9-d4c9-b3afa69ea124@pengutronix.de/
Fixes: dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to check correct value")
Cc: stable@vger.kernel.org
Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com>
Acked-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220323170458.5608-3-ikegami.t@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: cfi_cmdset_0002: Move and rename chip_check/chip_ready/chip_good_for_write

commit 083084df578a8bdb18334f69e7b32d690aaa3247 upstream.

This is a preparation patch for the S29GL064N buffer writes fix. There
is no functional change.

Link: https://lore.kernel.org/r/b687c259-6413-26c9-d4c9-b3afa69ea124@pengutronix.de/
Fixes: dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to check correct value")
Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com>
Cc: stable@vger.kernel.org
Acked-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220323170458.5608-2-ikegami.t@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md: fix an incorrect NULL check in md_reload_sb

commit 64c54d9244a4efe9bc6e9c98e13c4bbb8bb39083 upstream.

The bug is here:
if (!rdev || rdev->desc_nr != nr) {

The list iterator value 'rdev' will *always* be set and non-NULL
by rdev_for_each_rcu(), so it is incorrect to assume that the
iterator value will be NULL if the list is empty or no element
found (In fact, it will be a bogus pointer to an invalid struct
object containing the HEAD). Otherwise it will bypass the check
and lead to invalid memory access passing the check.

To fix the bug, use a new variable 'iter' as the list iterator,
while using the original variable 'pdev' as a dedicated pointer to
point to the found element.

Cc: stable@vger.kernel.org
Fixes: 70bcecdb1534 ("md-cluster: Improve md_reload_sb to be less error prone")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md: fix an incorrect NULL check in does_sb_need_changing

commit fc8738343eefc4ea8afb6122826dea48eacde514 upstream.

The bug is here:
if (!rdev)

The list iterator value 'rdev' will *always* be set and non-NULL
by rdev_for_each(), so it is incorrect to assume that the iterator
value will be NULL if the list is empty or no element found.
Otherwise it will bypass the NULL check and lead to invalid memory
access passing the check.

To fix the bug, use a new variable 'iter' as the list iterator,
while using the original variable 'rdev' as a dedicated pointer to
point to the found element.

Cc: stable@vger.kernel.org
Fixes: 2aa82191ac36 ("md-cluster: Perform a lazy update")
Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Acked-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/dsi: fix VBT send packet port selection for ICL+

commit 0ea917819d12fed41ea4662cc26ffa0060a5c354 upstream.

The VBT send packet port selection was never updated for ICL+ where the
2nd link is on port B instead of port C as in VLV+ DSI.

First, single link DSI needs to use the configured port instead of
relying on the VBT sequence block port. Remove the hard-coded port C
check here and make it generic. For reference, see commit f915084edc5a
("drm/i915: Changes related to the sequence port no for") for the
original VLV specific fix.

Second, the sequence block port number is either 0 or 1, where 1
indicates the 2nd link. Remove the hard-coded port C here for 2nd
link. (This could be a "find second set bit" on DSI ports, but just
check the two possible options.)

Third, sanity check the result with a warning to avoid a NULL pointer
dereference.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5984
Cc: stable@vger.kernel.org # v4.19+
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220520094600.2066945-1-jani.nikula@intel.com
(cherry picked from commit 08c59dde71b73a0ac94e3ed2d431345b01f20485)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/bridge: analogix_dp: Grab runtime PM reference for DP-AUX

commit 8fb6c44fe8468f92ac7b8bbfcca4404a4e88645f upstream.

If the display is not enable()d, then we aren't holding a runtime PM
reference here. Thus, it's easy to accidentally cause a hang, if user
space is poking around at /dev/drm_dp_aux0 at the "wrong" time.

Let's get a runtime PM reference, and check that we "see" the panel.
Don't force any panel power-up, etc., because that can be intrusive, and
that's not what other drivers do (see
drivers/gpu/drm/bridge/ti-sn65dsi86.c and
drivers/gpu/drm/bridge/parade-ps8640.c.)

Fixes: 0d97ad03f422 ("drm/bridge: analogix_dp: Remove duplicated code")
Cc: <stable@vger.kernel.org>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301181107.v4.1.I773a08785666ebb236917b0c8e6c05e3de471e75@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/kms/nv50-: atom: fix an incorrect NULL check on list iterator

commit 6ce4431c7ba7954c4fa6a96ce16ca1b2943e1a83 upstream.

The bug is here:
return encoder;

The list iterator value 'encoder' will *always* be set and non-NULL
by drm_for_each_encoder_mask(), so it is incorrect to assume that the
iterator value will be NULL if the list is empty or no element found.
Otherwise it will bypass some NULL checks and lead to invalid memory
access passing the check.

To fix this bug, just return 'encoder' when found, otherwise return
NULL.

Cc: stable@vger.kernel.org
Fixes: 12885ecbfe62d ("drm/nouveau/kms/nvd9-: Add CRC support")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[Changed commit title]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220327073925.11121-1-xiam0nd.tong@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/clk: Fix an incorrect NULL check on list iterator

commit 1c3b2a27def609473ed13b1cd668cb10deab49b4 upstream.

The bug is here:
if (nvkm_cstate_valid(clk, cstate, max_volt, clk->temp))
return cstate;

The list iterator value 'cstate' will *always* be set and non-NULL
by list_for_each_entry_from_reverse(), so it is incorrect to assume
that the iterator value will be unchanged if the list is empty or no
element is found (In fact, it will be a bogus pointer to an invalid
structure object containing the HEAD). Also it missed a NULL check
at callsite and may lead to invalid memory access after that.

To fix this bug, just return 'encoder' when found, otherwise return
NULL. And add the NULL check.

Cc: stable@vger.kernel.org
Fixes: 1f7f3d91ad38a ("drm/nouveau/clk: Respect voltage limits in nvkm_cstate_prog")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220327075824.11806-1-xiam0nd.tong@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/etnaviv: check for reaped mapping in etnaviv_iommu_unmap_gem

commit e168c25526cd0368af098095c2ded4a008007e1b upstream.

When the mapping is already reaped the unmap must be a no-op, as we
would otherwise try to remove the mapping twice, corrupting the involved
data structures.

Cc: stable@vger.kernel.org # 5.4
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Guido Günther <agx@sigxcpu.org>
Acked-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/subdev/bus: Ratelimit logging for fault errors

commit 9887bda0c831df0c044d6de147d002e48024fb4a upstream.

There's plenty of ways to fudge the GPU when developing on nouveau by
mistake, some of which can result in nouveau seriously spamming dmesg with
fault errors. This can be somewhat annoying, as it can quickly overrun the
message buffer (or your terminal emulator's buffer) and get rid of actually
useful feedback from the driver. While working on my new atomic only MST
branch, I ran into this issue a couple of times.

So, let's fix this by adding nvkm_error_ratelimited(), and using it to
ratelimit errors from faults. This should be fine for developers, since
it's nearly always only the first few faults that we care about seeing.
Plus, you can turn off rate limiting in the kernel if you really need to.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220429195350.85620-1-lyude@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu/cs: make commands with 0 chunks illegal behaviour.

commit 31ab27b14daaa75541a415c6794d6f3567fea44a upstream.

Submitting a cs with 0 chunks, causes an oops later, found trying
to execute the wrong userspace driver.

MESA_LOADER_DRIVER_OVERRIDE=v3d glxinfo

[172536.665184] BUG: kernel NULL pointer dereference, address: 00000000000001d8
[172536.665188] #PF: supervisor read access in kernel mode
[172536.665189] #PF: error_code(0x0000) - not-present page
[172536.665191] PGD 6712a0067 P4D 6712a0067 PUD 5af9ff067 PMD 0
[172536.665195] Oops: 0000 [#1] SMP NOPTI
[172536.665197] CPU: 7 PID: 2769838 Comm: glxinfo Tainted: P           O      5.10.81 #1-NixOS
[172536.665199] Hardware name: To be filled by O.E.M. To be filled by O.E.M./CROSSHAIR V FORMULA-Z, BIOS 2201 03/23/2015
[172536.665272] RIP: 0010:amdgpu_cs_ioctl+0x96/0x1ce0 [amdgpu]
[172536.665274] Code: 75 18 00 00 4c 8b b2 88 00 00 00 8b 46 08 48 89 54 24 68 49 89 f7 4c 89 5c 24 60 31 d2 4c 89 74 24 30 85 c0 0f 85 c0 01 00 00 <48> 83 ba d8 01 00 00 00 48 8b b4 24 90 00 00 00 74 16 48 8b 46 10
[172536.665276] RSP: 0018:ffffb47c0e81bbe0 EFLAGS: 00010246
[172536.665277] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[172536.665278] RDX: 0000000000000000 RSI: ffffb47c0e81be28 RDI: ffffb47c0e81bd68
[172536.665279] RBP: ffff936524080010 R08: 0000000000000000 R09: ffffb47c0e81be38
[172536.665281] R10: ffff936524080010 R11: ffff936524080000 R12: ffffb47c0e81bc40
[172536.665282] R13: ffffb47c0e81be28 R14: ffff9367bc410000 R15: ffffb47c0e81be28
[172536.665283] FS:  00007fe35e05d740(0000) GS:ffff936c1edc0000(0000) knlGS:0000000000000000
[172536.665284] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[172536.665286] CR2: 00000000000001d8 CR3: 0000000532e46000 CR4: 00000000000406e0
[172536.665287] Call Trace:
[172536.665322]  ? amdgpu_cs_find_mapping+0x110/0x110 [amdgpu]
[172536.665332]  drm_ioctl_kernel+0xaa/0xf0 [drm]
[172536.665338]  drm_ioctl+0x201/0x3b0 [drm]
[172536.665369]  ? amdgpu_cs_find_mapping+0x110/0x110 [amdgpu]
[172536.665372]  ? selinux_file_ioctl+0x135/0x230
[172536.665399]  amdgpu_drm_ioctl+0x49/0x80 [amdgpu]
[172536.665403]  __x64_sys_ioctl+0x83/0xb0
[172536.665406]  do_syscall_64+0x33/0x40
[172536.665409]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2018
Signed-off-by: Dave Airlie <airlied@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

landlock: Fix same-layer rule unions

commit 8ba0005ff418ec356e176b26eaa04a6ac755d05b upstream.

The original behavior was to check if the full set of requested accesses
was allowed by at least a rule of every relevant layer.  This didn't
take into account requests for multiple accesses and same-layer rules
allowing the union of these accesses in a complementary way.  As a
result, multiple accesses requested on a file hierarchy matching rules
that, together, allowed these accesses, but without a unique rule
allowing all of them, was illegitimately denied.  This case should be
rare in practice and it can only be triggered by the path_rename or
file_open hook implementations.

For instance, if, for the same layer, a rule allows execution
beneath /a/b and another rule allows read beneath /a, requesting access
to read and execute at the same time for /a/b should be allowed for this
layer.

This was an inconsistency because the union of same-layer rule accesses
was already allowed if requested once at a time anyway.

This fix changes the way allowed accesses are gathered over a path walk.
To take into account all these rule accesses, we store in a matrix all
layer granting the set of requested accesses, according to the handled
accesses.  To avoid heap allocation, we use an array on the stack which
is 2*13 bytes.  A following commit bringing the LANDLOCK_ACCESS_FS_REFER
access right will increase this size to reach 112 bytes (2*14*4) in case
of link or rename actions.

Add a new layout1.layer_rule_unions test to check that accesses from
different rules pertaining to the same layer are ORed in a file
hierarchy.  Also test that it is not the case for rules from different
layers.

Reviewed-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20220506161102.525323-5-mic@digikod.net
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

landlock: Create find_rule() from unmask_layers()

commit 2cd7cd6eed88b8383cfddce589afe9c0ae1d19b4 upstream.

This refactoring will be useful in a following commit.

Reviewed-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20220506161102.525323-4-mic@digikod.net
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

landlock: Reduce the maximum number of layers to 16

commit 75c542d6c6cc48720376862d5496d51509160dfd upstream.

The maximum number of nested Landlock domains is currently 64.  Because
of the following fix and to help reduce the stack size, let's reduce it
to 16.  This seems large enough for a lot of use cases (e.g. sandboxed
init service, spawning a sandboxed SSH service, in nested sandboxed
containers).  Reducing the number of nested domains may also help to
discover misuse of Landlock (e.g. creating a domain per rule).

Add and use a dedicated layer_mask_t typedef to fit with the number of
layers.  This might be useful when changing it and to keep it consistent
with the maximum number of layers.

Reviewed-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20220506161102.525323-3-mic@digikod.net
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

landlock: Define access_mask_t to enforce a consistent access mask size

commit 5f2ff33e10843ef51275c8611bdb7b49537aba5d upstream.

Create and use the access_mask_t typedef to enforce a consistent access
mask size and uniformly use a 16-bits type. This will helps transition
to a 32-bits value one day.

Add a build check to make sure all (filesystem) access rights fit in.
This will be extended with a following commit.

Reviewed-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20220506161102.525323-2-mic@digikod.net
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/landlock: Test landlock_create_ruleset(2) argument check ordering

commit 6533d0c3a86ee1cc74ff37ac92ca597deb87015c upstream.

Add inval_create_ruleset_arguments, extension of
inval_create_ruleset_flags, to also check error ordering for
landlock_create_ruleset(2).

This is similar to the previous commit checking landlock_add_rule(2).

Test coverage for security/landlock is 94.4% of 504 lines accorging to
gcc/gcov-11.

Link: https://lore.kernel.org/r/20220506160820.524344-11-mic@digikod.net
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

landlock: Change landlock_restrict_self(2) check ordering

commit eba39ca4b155c54adf471a69e91799cc1727873f upstream.

According to the Landlock goal to be a security feature available to
unprivileges processes, it makes more sense to first check for
no_new_privs before checking anything else (i.e. syscall arguments).

Merge inval_fd_enforce and unpriv_enforce_without_no_new_privs tests
into the new restrict_self_checks_ordering. This is similar to the
previous commit checking other syscalls.

Link: https://lore.kernel.org/r/20220506160820.524344-10-mic@digikod.net
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

landlock: Change landlock_add_rule(2) argument check ordering

commit 589172e5636c4d16c40b90e87543d43defe2d968 upstream.

This makes more sense to first check the ruleset FD and then the rule
attribute. It will be useful to factor out code for other rule types.

Add inval_add_rule_arguments tests, extension of empty_path_beneath_attr
tests, to also check error ordering for landlock_add_rule(2).

Link: https://lore.kernel.org/r/20220506160820.524344-9-mic@digikod.net
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/landlock: Add tests for O_PATH

commit d1788ad990874734341b05ab8ccb6448c09c6422 upstream.

The O_PATH flag is currently not handled by Landlock. Let's make sure
this behavior will remain consistent with the same ruleset over time.

Cc: Shuah Khan <shuah@kernel.org>
Link: https://lore.kernel.org/r/20220506160820.524344-8-mic@digikod.net
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/landlock: Fully test file rename with "remove" access

commit 6a1bdd4a0bfc30fa4fa2b3a979e6525f28996db9 upstream.

These tests were missing to check the check_access_path() call with all
combinations of maybe_remove(old_dentry) and maybe_remove(new_dentry).

Extend layout1.link with a new complementary test and check that
REMOVE_FILE is not required to link a file.

Cc: Shuah Khan <shuah@kernel.org>
Link: https://lore.kernel.org/r/20220506160820.524344-7-mic@digikod.net
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/landlock: Extend access right tests to directories

commit d18955d094d09a220cf8f533f5e896a2fe31575a upstream.

Make sure that all filesystem access rights can be tied to directories.

Rename layout1.file_access_rights to layout1.file_and_dir_access_rights
to reflect this change.

Cc: Shuah Khan <shuah@kernel.org>
Link: https://lore.kernel.org/r/20220506160820.524344-6-mic@digikod.net
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/landlock: Add tests for unknown access rights

commit c56b3bf566da5a0dd3b58ad97a614b0928b06ebf upstream.

Make sure that trying to use unknown access rights returns an error.

Cc: Shuah Khan <shuah@kernel.org>
Link: https://lore.kernel.org/r/20220506160820.524344-5-mic@digikod.net
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/landlock: Extend tests for minimal valid attribute size

commit 291865bd7e8bb4b4033d341fa02dafa728e6378c upstream.

This might be useful when the struct landlock_ruleset_attr will get more
fields.

Cc: Shuah Khan <shuah@kernel.org>
Link: https://lore.kernel.org/r/20220506160820.524344-4-mic@digikod.net
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/landlock: Make tests build with old libc

commit 87129ef13603ae46c82bcd09eed948acf0506dbb upstream.

Replace SYS_<syscall> with __NR_<syscall>. Using the __NR_<syscall>
notation, provided by UAPI, is useful to build tests on systems without
the SYS_<syscall> definitions.

Replace SYS_pivot_root with __NR_pivot_root, and SYS_move_mount with
__NR_move_mount.

Define renameat2() and RENAME_EXCHANGE if they are unknown to old build
systems.

Cc: Shuah Khan <shuah@kernel.org>
Link: https://lore.kernel.org/r/20220506160820.524344-3-mic@digikod.net
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

landlock: Fix landlock_add_rule(2) documentation

commit a13e248ff90e81e9322406c0e618cf2168702f4e upstream.

It is not mandatory to pass a file descriptor obtained with the O_PATH
flag. Also, replace rule's accesses with ruleset's accesses.

Link: https://lore.kernel.org/r/20220506160820.524344-2-mic@digikod.net
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

samples/landlock: Format with clang-format

commit 81709f3dccacf4104a4bc2daa80bdd767a9c4c54 upstream.

Let's follow a consistent and documented coding style. Everything may
not be to our liking but it is better than tacit knowledge. Moreover,
this will help maintain style consistency between different developers.

This contains only whitespace changes.

Automatically formatted with:
clang-format-14 -i samples/landlock/*.[ch]

Link: https://lore.kernel.org/r/20220506160513.523257-8-mic@digikod.net
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

samples/landlock: Add clang-format exceptions

commit 9805a722db071e1772b80e6e0ff33f35355639ac upstream.

In preparation to a following commit, add clang-format on and
clang-format off stanzas around constant definitions. This enables to
keep aligned values, which is much more readable than packed
definitions.

Link: https://lore.kernel.org/r/20220506160513.523257-7-mic@digikod.net
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/landlock: Format with clang-format

commit 371183fa578a4cf56b3ae12e54b7f01a4249add1 upstream.

Let's follow a consistent and documented coding style. Everything may
not be to our liking but it is better than tacit knowledge. Moreover,
this will help maintain style consistency between different developers.

This contains only whitespace changes.

Automatically formatted with:
clang-format-14 -i tools/testing/selftests/landlock/*.[ch]

Link: https://lore.kernel.org/r/20220506160513.523257-6-mic@digikod.net
Cc: stable@vger.kernel.org
[mic: Update style according to
https://lore.kernel.org/r/02494cb8-2aa5-1769-f28d-d7206f284e5a@digikod.net]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/landlock: Normalize array assignment

commit 135464f9d29c5b306d7201220f1d00dab30fea89 upstream.

Add a comma after each array value to make clang-format keep the
current array formatting. See the following commit.

Automatically modified with:
sed -i 's/\t${}\|NULL$$/\0,/' tools/testing/selftests/landlock/fs_test.c

Link: https://lore.kernel.org/r/20220506160513.523257-5-mic@digikod.net
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/landlock: Add clang-format exceptions

commit 4598d9abf4215e1e371a35683350d50122793c80 upstream.

In preparation to a following commit, add clang-format on and
clang-format off stanzas around constant definitions and the TEST_F_FORK
macro. This enables to keep aligned values, which is much more readable
than packed definitions.

Add other clang-format exceptions for FIXTURE() and
FIXTURE_VARIANT_ADD() declarations to force space before open brace,
which is reported by checkpatch.pl .

Link: https://lore.kernel.org/r/20220506160513.523257-4-mic@digikod.net
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>