IB/mlx5: Add legacy events to DEVX list

Add two events that were defined in the device specification but were
not exposed in the driver list.

Post this patch those events can be read over the DEVX events interface
once be reported by the firmware.

Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Edward Srouji <edwards@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190808084358.29517-4-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>

Merge remote-tracking branch 'mlx5-next/mlx5-next' into wip/dl-for-next

Merging tip of mlx5-next in order to get changes related to adding
XRQ support to the DEVX interface needed prior to the following two
patches.

Signed-off-by: Doug Ledford <dledford@redhat.com>

net/mlx5: Add XRQ legacy commands opcodes

Add XRQ legacy commands opcodes, will be used via the DEVX interface.

Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

net/mlx5: Use debug message instead of warn

As QP may be created by DEVX, it may be valid to not find the rsn in
mlx5 core tree, change the level to be debug.

Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

RDMA/hns: Use the new APIs for printing log

Here uses the new APIs instead of some dev print interfaces in
some functions.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Link: https://lore.kernel.org/r/1565276034-97329-15-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/hns: Disable alw_lcl_lpbk of SSU

If we enabled alw_lcl_lpbk in promiscuous mode, packet whose source
and destination mac address is equal will be handled in both inner
loopback and outer loopback. This will halve performance of roce in
promiscuous mode.

Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Link: https://lore.kernel.org/r/1565276034-97329-14-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/hns: Remove redundant print in hns_roce_v2_ceq_int()

There is no need to tell users when eq->cons_index is overflow, we
just set it back to zero.

Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Link: https://lore.kernel.org/r/1565276034-97329-13-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/hns: Refactor hns_roce_v2_set_hem for hip08

In order to reduce the complexity of hns_roce_v2_set_hem, extract
the implementation of op as a function.

Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Link: https://lore.kernel.org/r/1565276034-97329-12-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/hns: Remove unnecessary kzalloc

For hns_roce_v2_query_qp and hns_roce_v2_modify_qp,
we can use stack memory to create qp context data.
Make the code simpler.

Signed-off-by: Lang Cheng <chenglang@huawei.com>
Link: https://lore.kernel.org/r/1565276034-97329-11-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/hns: Refactor irq request code

Remove unnecessary if...else..., to make the code look simpler.

Signed-off-by: Lang Cheng <chenglang@huawei.com>
Link: https://lore.kernel.org/r/1565276034-97329-10-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/hns: Split bool statement and assign statement

Assign statement can not be contained in bool statement or
function param.

Signed-off-by: Lang Cheng <chenglang@huawei.com>
Link: https://lore.kernel.org/r/1565276034-97329-9-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/hns: Handling the error return value of hem function

Handling the error return value of hns_roce_calc_hem_mhop.

Signed-off-by: Lang Cheng <chenglang@huawei.com>
Link: https://lore.kernel.org/r/1565276034-97329-8-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/hns: Update some comments style

Here removes some useless comments and adds necessary spaces to
another comments.

Signed-off-by: Lang Cheng <chenglang@huawei.com>
Link: https://lore.kernel.org/r/1565276034-97329-7-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/hns: Clean up unnecessary initial assignment

Here remove some unncessary initialization for some valiables.

Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Link: https://lore.kernel.org/r/1565276034-97329-6-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/hns: Remove unnessary init for cmq reg

There is no need to init the enable bit of cmq.

Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Link: https://lore.kernel.org/r/1565276034-97329-5-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/hns: Update the prompt message for creating and destroy qp

Current prompt message is uncorrect when destroying qp, add qpn
information when creating qp.

Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Link: https://lore.kernel.org/r/1565276034-97329-4-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/hns: Optimize hns_roce_modify_qp function

Here mainly packages some code into some new functions in order to
reduce code compelexity.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Link: https://lore.kernel.org/r/1565276034-97329-3-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/hns: Encapsulate some lines for setting sq size in user mode

It needs to check the sq size with integrity when configures
the relatived parameters of sq. Here moves the relatived code
into a special function.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Link: https://lore.kernel.org/r/1565276034-97329-2-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/hns: remove obsolete Kconfig comment

Since commit a07fc0bb483e ("RDMA/hns: Fix build error")
these kconfig comment is obsolete, so just remove it.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190807032228.6788-1-yuehaibing@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/{cxgb3, cxgb4, i40iw}: Remove common code

Now that we have a common iWARP query port function we can remove the
common code from the iWARP drivers.

Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Acked-by: Potnuri Bharat Teja <bharat@chelsio.com>
Link: https://lore.kernel.org/r/20190807103138.17219-5-kamalheib1@gmail.com
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/core: Add common iWARP query port

Add support for a common iWARP query port function, the new function
includes a common code that is used by the iWARP devices to update the
port attributes like max_mtu, active_mtu, state, and phys_state, the
function also includes a call for the driver-specific query_port callback
to query the device-specific port attributes.

Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Link: https://lore.kernel.org/r/20190807103138.17219-4-kamalheib1@gmail.com
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/cxgb3: Use ib_device_set_netdev()

This change is required to associate the cxgb3 ib_dev with the
underlying net_device, so in the upcoming patch we can call
ib_device_get_netdev().

Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Link: https://lore.kernel.org/r/20190807103138.17219-3-kamalheib1@gmail.com
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA: Introduce ib_port_phys_state enum

In order to improve readability, add ib_port_phys_state enum to replace
the use of magic numbers.

Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Andrew Boyer <aboyer@tobark.org>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Acked-by: Bernard Metzler <bmt@zurich.ibm.com>
Link: https://lore.kernel.org/r/20190807103138.17219-2-kamalheib1@gmail.com
Signed-off-by: Doug Ledford <dledford@redhat.com>

mlx5: Use refcount_t for refcount

Reference counters are preferred to use refcount_t instead of
atomic_t.
This is because the implementation of refcount_t can prevent
overflows and detect possible use-after-free.
So convert atomic_t ref counters to refcount_t.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: remove self-assignment on esw->dev

There is a self assignment of esw->dev to itself, clean this up by
removing it. Also make dev a const pointer.

Addresses-Coverity: ("Self assignment")
Fixes: 6cedde451399 ("net/mlx5: E-Switch, Verify support QoS element type")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

RDMA/efa: Rate limit admin queue error prints

Admin queue error prints should never happen unless something wrong
happened to the device. However, in the unfortunate case that it does,
we should take extra care not to flood the log with error messages.

Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Link: https://lore.kernel.org/r/20190801171447.54440-3-galpress@amazon.com
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/core: Introduce ratelimited ibdev printk functions

Add ratelimited helpers to the ibdev_* printk functions.
Implementation inspired by counterpart dev_*_ratelimited functions.

Signed-off-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190801171447.54440-2-galpress@amazon.com
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/hns: Remove not used UAR assignment

UAR in CQ is not used and generates the following compilation
warning, clean the code by removing uar assignment.

drivers/infiniband/hw/hns/hns_roce_cq.c: In function _create_user_cq_:
drivers/infiniband/hw/hns/hns_roce_cq.c:305:27: warning: parameter _uar_ set but not used [-Wunused-but-set-parameter]
  305 |      struct hns_roce_uar *uar,
      |      ~~~~~~~~~~~~~~~~~~~~~^~~

Fixes: 4f8f0d5e33dd ("RDMA/hns: Package the flow of creating cq")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190801114827.24263-1-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>

rdma: Enable ib_alloc_cq to spread work over a device's comp_vectors

Send and Receive completion is handled on a single CPU selected at
the time each Completion Queue is allocated. Typically this is when
an initiator instantiates an RDMA transport, or when a target
accepts an RDMA connection.

Some ULPs cannot open a connection per CPU to spread completion
workload across available CPUs and MSI vectors. For such ULPs,
provide an API that allows the RDMA core to select a completion
vector based on the device's complement of available comp_vecs.

ULPs that invoke ib_alloc_cq() with only comp_vector 0 are converted
to use the new API so that their completion workloads interfere less
with each other.

Suggested-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Cc: <linux-cifs@vger.kernel.org>
Cc: <v9fs-developer@lists.sourceforge.net>
Link: https://lore.kernel.org/r/20190729171923.13428.52555.stgit@manet.1015granger.net
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mlx5: Support MLX5_CMD_OP_QUERY_LAG as a DEVX general command

The "MLX5_CMD_OP_QUERY_LAG" is one of the DEVX general commands, add it.

Fixes: 8aa8c95ce4cc ("IB/mlx5: Add support for DEVX general command")
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

net/mlx5: Fix mlx5_ifc_query_lag_out_bits

Remove the "reserved_at_40" field to match the device specification.

Fixes: 84df61ebc69b ("net/mlx5: Add HW interfaces used by LAG")
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

mlx5: Fix formats with line continuation whitespace

The line continuations unintentionally add whitespace so
instead use coalesced formats to remove the whitespace.

Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/f14db3287b23ed8af9bdbf8001e2e2fe7ae9e43a.camel@perches.com
Signed-off-by: Doug Ledford <dledford@redhat.com>

net/mlx5: E-switch, Tide up eswitch config sequence

Currently for PF and ECPF vports, representors are created before
their eswitch hardware ports are initialized in below flow.

mlx5_eswitch_enable()
  esw_offloads_init()
    esw_offloads_load_all_reps()
[..]
esw_enable_vport()

However for VFs, vports are initialized before creating their
respective netdev represnetors in event handling context.

Similarly while disabling eswitch, first hardware vports are disabled,
followed by destroying their representors.
Here while underlying vports gets destroyed but its respective user
facing netdevice can still exist on which user can continue to perform
more offload operations.

Instead, its more accurate to do
enable_eswitch switchdev mode:
1. perform FDB tables initialization
2. initialize hw vport
3. create and publish representor for this vport

disable_eswitch switchdev mode:
1. destroy user facing representor for the vport
2. disable hw vport
3. perform FDB tables cleanup

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: E-Switch, Remove redundant mc_promisc NULL check

mc_promisc pointer points to an instance of struct esw_mc_addr allocated
as part of the esw structure.
Hence it cannot be NULL.
Removed such redundant check and assign where it is actually used.

While at it, add comment around legacy mode fields and move mc_promisc
close to other legacy mode structures to improve code redability.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: E-Switch, remove redundant error handling

We don't need to handle error flow of esw_create_legacy_table() in the
same branch, it is already being handled directly after the if statement,
for both legacy and switchdev modes in one place.

Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: E-switch, Introduce helper function to enable/disable vports

vports needs to be enabled in switchdev and legacy mode.

In switchdev mode, vports should be enabled after initializing
the FDB tables and before creating their represntors so that
representor works on an initialized vport object.

Prepare a helper function which can be called when enabling either of
the eswitch modes.

Similarly, have disable vports helper function.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: E-switch, Initialize TSAR Qos hardware block before its user vports

First enable TSAR Qos hardware block in device before enabling its
user vports.

This refactor is needed so that vports can be enabled before their
representor netdevice can be created.

While at it, esw_create_tsar() returns error code which was used only to
print error. However esw_create_tsar() already prints warning if it hits
an error.
Hence, remove the redundant warning.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: E-switch, Combine metadata enable/disable functionality

Except bit toggling code, rest of the code is same to enable/disable
metadata passing functionality.
Hence, combine them to single function and control using enable flag.

Also instead of checking metadata supported at multiple places,
fold into the helper function.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: E-Switch, Verify support QoS element type

Check if firmware supports the requested element type before
attempting to create the element type.
In addition, explicitly specify the request element type and tsar type.

Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: Make load_one() and unload_one() symmetric

Currently mlx5_load_one() perform device registration using
mlx5_register_device(). But mlx5_unload_one() doesn't unregister.

Make them symmetric by doing device unregistration in
mlx5_unload_one().

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: Fix offset of tisc bits reserved field

First reserved field is off by one instead of reserved_at_1 it should be
reserved_at_2, fix that.

Fixes: a12ff35e0fb7 ("net/mlx5: Introduce TLS TX offload hardware bits and structures")
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: Add flow counter bulk allocation hardware bits and command

Add a handle to invoke the new FW capability of allocating a bulk of
flow counters.

Signed-off-by: Gavi Teitz <gavi@mellanox.com>
Reviewed-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: Refactor and optimize flow counter bulk query

Towards introducing the ability to allocate bulks of flow counters,
refactor the flow counter bulk query process, removing functions and
structs whose names indicated being used for flow counter bulk
allocation FW commands, despite them actually only being used to
support bulk querying, and migrate their functionality to correctly
named functions in their natural location, fs_counters.c.

Additionally, optimize the bulk query process by:
 * Extracting the memory used for the query to mlx5_fc_stats so
   that it is only allocated once, and not for each bulk query.
 * Querying all the counters in one function call.

Signed-off-by: Gavi Teitz <gavi@mellanox.com>
Reviewed-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

RDMA/hns: remove set but not used variable 'irq_num'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/infiniband/hw/hns/hns_roce_hw_v2.c: In function hns_roce_v2_cleanup_eq_table:
drivers/infiniband/hw/hns/hns_roce_hw_v2.c:5920:6:
 warning: variable irq_num set but not used [-Wunused-but-set-variable]

It is not used since
commit 33db6f94847c ("RDMA/hns: Refactor eq table init for hip08")

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190731073748.17664-1-yuehaibing@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/mlx5: Remove DEBUG ODP code

Delete DEBUG ODP dead code which is leftover from development
stage and doesn't need to be part of the upstream kernel.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190731115627.5433-1-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/core: fix spelling mistake "Nelink" -> "Netlink"

There is a spelling mistake in a warning message, fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190731080144.18327-1-colin.king@canonical.com
Signed-off-by: Doug Ledford <dledford@redhat.com>

infiniband: Remove dev_err() usage after platform_get_irq()

We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.

// <smpl>
@@
expression ret;
struct platform_device *E;
@@

ret =
(
platform_get_irq(E, ...)
|
platform_get_irq_byname(E, ...)
);

if ( \( ret < 0 \| ret <= 0 \) )
{
(
-if (ret != -EPROBE_DEFER)
-{ ...
-dev_err(...);
-... }
|
...
-dev_err(...);
)
...
}
// </smpl>

While we're here, remove braces on if statements that only have one
statement (manually).

Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20190730181557.90391-21-swboyd@chromium.org
Signed-off-by: Doug Ledford <dledford@redhat.com>

net/mlx5: fix -Wtype-limits compilation warnings

The commit b9a7ba556207 ("net/mlx5: Use event mask based on device
capabilities") introduced a few compilation warnings due to it bumps
MLX5_EVENT_TYPE_MAX from 0x27 to 0x100 which is always greater than
an "struct {mlx5_eqe|mlx5_nb}.type" that is an "u8".

drivers/net/ethernet/mellanox/mlx5/core/eq.c: In function
'mlx5_eq_notifier_register':
drivers/net/ethernet/mellanox/mlx5/core/eq.c:948:21: warning: comparison
is always false due to limited range of data type [-Wtype-limits]
  if (nb->event_type >= MLX5_EVENT_TYPE_MAX)
                     ^~
drivers/net/ethernet/mellanox/mlx5/core/eq.c: In function
'mlx5_eq_notifier_unregister':
drivers/net/ethernet/mellanox/mlx5/core/eq.c:959:21: warning: comparison
is always false due to limited range of data type [-Wtype-limits]
  if (nb->event_type >= MLX5_EVENT_TYPE_MAX)

Fix them by removing unnecessary checkings.

Fixes: b9a7ba556207 ("net/mlx5: Use event mask based on device capabilities")
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

RDMA/efa: Expose device statistics

Expose hardware statistics through the sysfs api:
/sys/class/infiniband/efa_0/hw_counters/*.
/sys/class/infiniband/efa_0/ports/1/hw_counters/*.

Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Link: https://lore.kernel.org/r/20190725130353.11544-1-galpress@amazon.com
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/bnxt_re: Do not notifify GID change event

GID table entry operations such as add/remove/modify are triggered
by the IB core for RoCE ports.
Hence, remove GID change notification from hw driver.

Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Tested-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Link: https://lore.kernel.org/r/20190726182652.50037-1-parav@mellanox.com
Signed-off-by: Doug Ledford <dledford@redhat.com>

Merge branch 'wip/dl-for-rc' into wip/dl-for-next

The fix for IB port statistics initialization ("IB/core: Fix querying
total rdma stats") is needed before we take a follow-on patch to
for-next.

Signed-off-by: Doug Ledford <dledford@redhat.com>

Do not dereference 'siw_crypto_shash' before checking

Reported-by: "Dan Carpenter" <dan.carpenter@oracle.com>
Fixes: f29dd55b0236 ("rdma/siw: queue pair methods")
Link: https://lore.kernel.org/r/OF61E386ED.49A73798-ON00258444.003BD6A6-00258444.003CC8D9@notes.na.collabserv.com
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/qedr: Fix the hca_type and hca_rev returned in device attributes

There was a place holder for hca_type and vendor was returned
in hca_rev. Fix the hca_rev to return the hw revision and fix
the hca_type to return an informative string representing the
hca.

Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Link: https://lore.kernel.org/r/20190728111338.21930-1-michal.kalderon@marvell.com
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/hns: Fix build error

If INFINIBAND_HNS_HIP08 is selected and HNS3 is m,
but INFINIBAND_HNS is y, building fails:

drivers/infiniband/hw/hns/hns_roce_hw_v2.o: In function `hns_roce_hw_v2_exit':
hns_roce_hw_v2.c:(.exit.text+0xd): undefined reference to `hnae3_unregister_client'
drivers/infiniband/hw/hns/hns_roce_hw_v2.o: In function `hns_roce_hw_v2_init':
hns_roce_hw_v2.c:(.init.text+0xd): undefined reference to `hnae3_register_client'

Also if INFINIBAND_HNS_HIP06 is selected and HNS_DSAF
is m, but INFINIBAND_HNS is y, building fails:

drivers/infiniband/hw/hns/hns_roce_hw_v1.o: In function `hns_roce_v1_reset':
hns_roce_hw_v1.c:(.text+0x39fa): undefined reference to `hns_dsaf_roce_reset'
hns_roce_hw_v1.c:(.text+0x3a25): undefined reference to `hns_dsaf_roce_reset'

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: dd74282df573 ("RDMA/hns: Initialize the PCI device for hip08 RoCE")
Fixes: 08805fdbeb2d ("RDMA/hns: Split hw v1 driver from hns roce driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190724065443.53068-1-yuehaibing@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mlx5: Support per device q counters in switchdev mode

When parent mlx5_core_dev is in switchdev mode, q_counters are not
applicable to multiple non uplink vports.
Hence, have make them limited to device level.

While at it, correct __mlx5_ib_qp_set_counter() and
__mlx5_ib_modify_qp() to use u16 set_id as defined by the device.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190723073117.7175-3-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mlx5: Refactor code for counters allocation

To support per device counters in switchdev mode (instead of
per port counter), refactor query routines to work on mlx5_ib_counter
structure instead of mlx5_ib_port structure.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190723073117.7175-2-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>

qed*: Change dpi_addr to be denoted with __iomem

Several casts were required around dpi_addr parameter in qed_rdma_if.h
This is an address on the doorbell bar and should therefore be marked with
__iomem.

Link: https://lore.kernel.org/r/20190709141735.19193-5-michal.kalderon@marvell.com
Reported-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Add CREATE_PSV/DESTROY_PSV for devx interface

Limit the number of PSV's created through devx to 1, to create a symmetry
between create/destroy cmds. In the kernel, one can create up to 4 PSV's
using CREATE_PSV cmd but the destruction is one by one. Add a protection
for this a-symmetric definition for devx.

Link: https://lore.kernel.org/r/20190723070412.6385-1-leon@kernel.org
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Support netlink commands in non init_net net namespaces

Now that IB core supports RDMA device binding with specific net namespace,
enable IB core to accept netlink commands in non init_net namespaces.

This is done by having per net namespace netlink socket.

At present only netlink device handling client RDMA_NL_NLDEV supports
device handling in multiple net namespaces.  Hence do not accept netlink
messages for other clients in non init_net net namespaces.

Link: https://lore.kernel.org/r/20190723070205.6247-1-leon@kernel.org
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/mlx4: Annotate boolean arguments as bool and not int

Information provided by qp_has_rq() and used latter is boolean, so update
callers to proper type.

Link: https://lore.kernel.org/r/20190704130936.8705-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/mlx4: Separate creation of RWQ and QP

The mlx4 WQ is implemented with HW QP without special HW object.  Current
implementation which tried to reuse the code did it with common QP
creation flows. Such decision caused to the absence of mlx4_ib_wq struct,
which is needed to ensure proper allocation of ib_wq inside of IB/core.

Separate create_qp_common() to pure QP flow and to create_rq() for RWQ.

Link: https://lore.kernel.org/r/20190704130936.8705-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/usnic: Use dev_get_drvdata

Instead of using to_pci_dev + pci_get_drvdata, use dev_get_drvdata to make
the code simpler.

Link: https://lore.kernel.org/r/20190723114928.18424-1-hslester96@gmail.com
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA: Make most headers compile stand alone

So that rdma can work with CONFIG_KERNEL_HEADER_TEST and
CONFIG_HEADERS_CHECK.

Link: https://lore.kernel.org/r/20190722170126.GA16453@ziepe.ca
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/qedr: Remove Unneeded variable rc

Fix the below warning reported by coccicheck:

drivers/infiniband/hw/qedr/verbs.c:2454:5-7: Unneeded variable: "rc".
Return "0" on line 2499

Link: https://lore.kernel.org/r/20190716173712.GA12949@hari-Inspiron-1545
Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/qib: Unneeded variable ret

Fix the below warning reported by coccicheck:

drivers/infiniband/hw/qib/qib_file_ops.c:1792:5-8: Unneeded variable:
"ret". Return "0" on line 1876

Link: https://lore.kernel.org/r/20190716172924.GA12241@hari-Inspiron-1545
Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Refactor eq table init for hip08

To make the code more readable, move the part of naming irq and request
irq out of eq table init into a separate function.

Link: https://lore.kernel.org/r/1562593285-8037-10-git-send-email-oulijun@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Refactor hem table mhop check and calculation

The calculation of mhop for hem is duplicated in hns_roce_init_hem_table
and hns_roce_calc_hem_mhop, extracting it from them to a separate
function. Moreover, this patch refactors hns_roce_check_whether_mhop to
reduce complexity.

Link: https://lore.kernel.org/r/1562593285-8037-9-git-send-email-oulijun@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Package for hns_roce_rereg_user_mr function

Move some code of the hns_roce_rereg_user_mr() function into an
independent function in oder to improve readability.

Link: https://lore.kernel.org/r/1562593285-8037-8-git-send-email-oulijun@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Optimize hns_roce_mhop_alloc function.

Move some lines for allocating multi-hop addressing into independent
functions in order to improve readability.

Link: https://lore.kernel.org/r/1562593285-8037-7-git-send-email-oulijun@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: optimize the duplicated code for qpc setting flow

Currently, more than 20 lines of duplicate code exist in function
'modify_qp_init_to_init' and function 'modify_qp_reset_to_init', which
affects the readability of the code. Consolidate them.

Link: https://lore.kernel.org/r/1562593285-8037-6-git-send-email-oulijun@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Use a separated function for setting extend sge paramters

Moves the related lines of setting extended sge size into a separate
function as well as remove the unused variables.

Link: https://lore.kernel.org/r/1562593285-8037-5-git-send-email-oulijun@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Refactor for hns_roce_v2_modify_qp function

Move some lines which exist hns_roce_v2_modify_qp function into a new
function. The code refactored mainly includes some absolute fields of qp
context and some optional fields of qp context.

Link: https://lore.kernel.org/r/1562593285-8037-4-git-send-email-oulijun@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Refactor the code of creating srq

Move the related codes of creating user srq and kernel srq into two
independent functions as well as remove some unused code and
simplifications.

Link: https://lore.kernel.org/r/1562593285-8037-3-git-send-email-oulijun@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Package the flow of creating cq

Moves the related code of creating cq into separate functions in order to
improve comprehensibility.

Link: https://lore.kernel.org/r/1562593285-8037-2-git-send-email-oulijun@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Avoid unnecessary typecast

IB device pointer is already available while deallocating IB device,
Hence do not typecast it.

Link: https://lore.kernel.org/r/20190723065733.4899-9-leon@kernel.org
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Annotate destroy of mutex to ensure that it is released as unlocked

While compiled with CONFIG_DEBUG_MUTEXES, the kernel ensures that mutex is
not held during destroy. Hence add mutex_destroy() for mutexes used in
RDMA modules.

Link: https://lore.kernel.org/r/20190723065733.4899-2-leon@kernel.org
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Fix RSS Toeplitz setup to be aligned with the HW specification

The specification for the Toeplitz function doesn't require to set the key
explicitly to be symmetric. In case a symmetric functionality is required
a symmetric key can be simply used.

Wrongly forcing the algorithm to symmetric causes the wrong packet
distribution and a performance degradation.

Link: https://lore.kernel.org/r/20190723065733.4899-7-leon@kernel.org
Cc: <stable@vger.kernel.org> # 4.7
Fixes: 28d6137008b2 ("IB/mlx5: Add RSS QP support")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Alex Vainman <alexv@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/counters: Always initialize the port counter object

Port counter objects should be initialized even if alloc_stats is
unsupported, otherwise QP bind operations in user space can trigger a NULL
pointer deference if they try to bind QP on RDMA device which doesn't
support counters.

Fixes: f34a55e497e8 ("RDMA/core: Get sum value of all counters when perform a sysfs stat read")
Link: https://lore.kernel.org/r/20190723065733.4899-11-leon@kernel.org
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/core: Fix querying total rdma stats

rdma_counter_init() may fail for a device. In such case while calculating
total sum, ignore NULL hstats.

This fixes below observed call trace.

BUG: kernel NULL pointer dereference, address: 00000000000000a0
PGD 8000001009b30067 P4D 8000001009b30067 PUD 10549c9067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 55 PID: 20887 Comm: cat Kdump: loaded Not tainted 5.2.0-rc6-jdc+ #13
RIP: 0010:rdma_counter_get_hwstat_value+0xf2/0x150 [ib_core]
Call Trace:
 show_hw_stats+0x5e/0x130 [ib_core]
 dev_attr_show+0x15/0x50
 sysfs_kf_seq_show+0xc6/0x1a0
 seq_read+0x132/0x370
 vfs_read+0x89/0x140
 ksys_read+0x5c/0xd0
 do_syscall_64+0x5a/0x240
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: f34a55e497e8 ("RDMA/core: Get sum value of all counters when perform a sysfs stat read")
Link: https://lore.kernel.org/r/20190723065733.4899-10-leon@kernel.org
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Prevent concurrent MR updates during invalidation

The device requires that memory registration work requests that update the
address translation table of a MR will be fenced if posted together.  This
scenario can happen when address ranges are invalidated by the mmu in
separate concurrent calls to the invalidation callback.

We prefer to block concurrent address updates for a single MR over fencing
since making the decision if a WQE needs fencing will be more expensive
and fencing all WQEs is a too radical choice.

Further, it isn't clear that this code can even run safely concurrently,
so a lock is a safer choice.

Fixes: b4cfe447d47b ("IB/mlx5: Implement on demand paging by adding support for MMU notifiers")
Link: https://lore.kernel.org/r/20190723065733.4899-8-leon@kernel.org
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Fix clean_mr() to work in the expected order

Any dma map underlying the MR should only be freed once the MR is fenced
at the hardware.

As of the above we first destroy the MKEY and just after that can safely
call to dma_unmap_single().

Link: https://lore.kernel.org/r/20190723065733.4899-6-leon@kernel.org
Cc: <stable@vger.kernel.org> # 4.3
Fixes: 8a187ee52b04 ("IB/mlx5: Support the new memory registration API")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Move MRs to a kernel PD when freeing them to the MR cache

Fix unreg_umr to move the MR to a kernel owned PD (i.e. the UMR PD) which
can't be accessed by userspace.

This ensures that nothing can continue to access the MR once it has been
placed in the kernels cache for reuse.

MRs in the cache continue to have their HW state, including DMA tables,
present. Even though the MR has been invalidated, changing the PD provides
an additional layer of protection against use of the MR.

Link: https://lore.kernel.org/r/20190723065733.4899-5-leon@kernel.org
Cc: <stable@vger.kernel.org> # 3.10
Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Use direct mkey destroy command upon UMR unreg failure

Use a direct firmware command to destroy the mkey in case the unreg UMR
operation has failed.

This prevents a case that a mkey will leak out from the cache post a
failure to be destroyed by a UMR WR.

In case the MR cache limit didn't reach a call to add another entry to the
cache instead of the destroyed one is issued.

In addition, replaced a warn message to WARN_ON() as this flow is fatal
and can't happen unless some bug around.

Link: https://lore.kernel.org/r/20190723065733.4899-4-leon@kernel.org
Cc: <stable@vger.kernel.org> # 4.10
Fixes: 49780d42dfc9 ("IB/mlx5: Expose MR cache for mlx5_ib")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Fix unreg_umr to ignore the mkey state

Fix unreg_umr to ignore the mkey state and do not fail if was freed.  This
prevents a case that a user space application already changed the mkey
state to free and then the UMR operation will fail leaving the mkey in an
inappropriate state.

Link: https://lore.kernel.org/r/20190723065733.4899-3-leon@kernel.org
Cc: <stable@vger.kernel.org> # 3.19
Fixes: 968e78dd9644 ("IB/mlx5: Enhance UMR support to allow partial page table update")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Fix comparison of unsigned long variable 'end' with less than zero

Currently the comparison of end with less than zero is always false
because end is an unsigned long.  Also, replace checks of end with
non-zero with end > 0 as it is possible that the #defined decrement may be
changed in the future causing end to step over zero and go negative.

The initialization of end with 0 is also redundant as this value is never
read and is later set to HW_SYNC_TIMEOUT_MSECS, so fix this by
initializing it with this value to begin with.

Link: https://lore.kernel.org/r/20190531092101.28772-1-colin.king@canonical.com
Addresses-Coverity: ("Unsigned compared against 0")
Fixes: 669cefb654cb ("RDMA/hns: Remove jiffies operation in disable interrupt context")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/mlx4: Untag user pointers in mlx4_get_umem_mr

This patch is a part of a series that extends kernel ABI to allow to pass
tagged user pointers (with the top byte set to something else other than
0x00) as syscall arguments.

mlx4_get_umem_mr() uses provided user pointers for vma lookups, which can
only by done with untagged pointers.

Untag user pointers in this function.

Link: https://lore.kernel.org/r/7969018013a67ddbbf784ac7afeea5a57b1e2bcb.1563904656.git.andreyknvl@google.com
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/hfi1: Remove unused define

The patch noted in Fixes missed deleting the define it obsoleted.

Fixes: da9de5f8527f ("IB/hfi1: Close PSM sdma_progress sleep window")
Link: https://lore.kernel.org/r/20190715164552.74174.99396.stgit@awfm-01.aw.intel.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/hfi1: Do not update hcrc for a KDETH packet during fault injection

When a KDETH packet is subject to fault injection during transmission,
HCRC is supposed to be omitted from the packet so that the hardware on the
receiver side would drop the packet. When creating pbc, the PbcInsertHcrc
field is set to be PBC_IHCRC_NONE if the KDETH packet is subject to fault
injection, but overwritten with PBC_IHCRC_LKDETH when update_hcrc() is
called later.

This problem is fixed by not calling update_hcrc() when the packet is
subject to fault injection.

Fixes: 6b6cf9357f78 ("IB/hfi1: Set PbcInsertHcrc for TID RDMA packets")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190715164546.74174.99296.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/siw: Remove set but not used variables 'rv'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/infiniband/sw/siw/siw_cm.c: In function siw_cep_set_inuse:
drivers/infiniband/sw/siw/siw_cm.c:223:6: warning: variable rv set but not used [-Wunused-but-set-variable]

Fixes: 6c52fdc244b5 ("rdma/siw: connection management")
Link: https://lore.kernel.org/r/20190719012938.100628-1-maowenan@huawei.com
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Replace kfree with kvfree

Memory allocated by kvzalloc should not be freed by kfree(), use kvfree()
instead.

Fixes: 813e90b1aeaa ("IB/mlx5: Add advise_mr() support")
Link: https://lore.kernel.org/r/20190717082101.14196-1-hslester96@gmail.com
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/bnxt_re: Honor vlan_id in GID entry comparison

A GID entry consists of GID, vlan, netdev and smac.  Extend GID duplicate
check comparisons to consider vlan_id as well to support IPv6 VLAN based
link local addresses. Introduce a new structure (bnxt_qplib_gid_info) to
hold gid and vlan_id information.

The issue is discussed in the following thread
https://lore.kernel.org/r/AM0PR05MB4866CFEDCDF3CDA1D7D18AA5D1F20@AM0PR05MB4866.eurprd05.prod.outlook.com

Fixes: 823b23da7113 ("IB/core: Allow vlan link local address based RoCE GIDs")
Cc: <stable@vger.kernel.org> # v5.2+
Link: https://lore.kernel.org/r/20190715091913.15726-1-selvin.xavier@broadcom.com
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Co-developed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/hfi1: Drop all TID RDMA READ RESP packets after r_next_psn

When a TID sequence error occurs while receiving TID RDMA READ RESP
packets, all packets after flow->flow_state.r_next_psn should be dropped,
including those response packets for subsequent segments.

The current implementation will drop the subsequent response packets for
the segment to complete next, but may accept packets for subsequent
segments and therefore mistakenly advance the r_next_psn fields for the
corresponding software flows. This may result in failures to complete
subsequent segments after the current segment is completed.

The fix is to only use the flow pointed by req->clear_tail for checking
KDETH PSN instead of finding a flow from the request's flow array.

Fixes: b885d5be9ca1 ("IB/hfi1: Unify the software PSN check for TID RDMA READ/WRITE")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190715164540.74174.54702.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/hfi1: Field not zero-ed when allocating TID flow memory

The field flow->resync_npkts is added for TID RDMA WRITE request and
zero-ed when a TID RDMA WRITE RESP packet is received by the requester.
This field is used to rewind a request during retry in the function
hfi1_tid_rdma_restart_req() shared by both TID RDMA WRITE and TID RDMA
READ requests. Therefore, when a TID RDMA READ request is retried, this
field may not be initialized at all, which causes the retry to start at an
incorrect psn, leading to the drop of the retry request by the responder.

This patch fixes the problem by zeroing out the field when the flow memory
is allocated.

Fixes: 838b6fd2d9ca ("IB/hfi1: TID RDMA RcvArray programming and TID allocation")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190715164534.74174.6177.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/hfi1: Unreserve a flushed OPFN request

When an OPFN request is flushed, the request is completed without
unreserving itself from the send queue. Subsequently, when a new
request is post sent, the following warning will be triggered:

WARNING: CPU: 4 PID: 8130 at rdmavt/qp.c:1761 rvt_post_send+0x72a/0x880 [rdmavt]
Call Trace:
[<ffffffffbbb61e41>] dump_stack+0x19/0x1b
[<ffffffffbb497688>] __warn+0xd8/0x100
[<ffffffffbb4977cd>] warn_slowpath_null+0x1d/0x20
[<ffffffffc01c941a>] rvt_post_send+0x72a/0x880 [rdmavt]
[<ffffffffbb4dcabe>] ? account_entity_dequeue+0xae/0xd0
[<ffffffffbb61d645>] ? __kmalloc+0x55/0x230
[<ffffffffc04e1a4c>] ib_uverbs_post_send+0x37c/0x5d0 [ib_uverbs]
[<ffffffffc04e5e36>] ? rdma_lookup_put_uobject+0x26/0x60 [ib_uverbs]
[<ffffffffc04dbce6>] ib_uverbs_write+0x286/0x460 [ib_uverbs]
[<ffffffffbb6f9457>] ? security_file_permission+0x27/0xa0
[<ffffffffbb641650>] vfs_write+0xc0/0x1f0
[<ffffffffbb64246f>] SyS_write+0x7f/0xf0
[<ffffffffbbb74ddb>] system_call_fastpath+0x22/0x27

This patch fixes the problem by moving rvt_qp_wqe_unreserve() into
rvt_qp_complete_swqe() to simplify the code and make it less
error-prone.

Fixes: ca95f802ef51 ("IB/hfi1: Unreserve a reserved request when it is completed")
Link: https://lore.kernel.org/r/20190715164528.74174.31364.stgit@awfm-01.aw.intel.com
Cc: <stable@vger.kernel.org>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/hfi1: Check for error on call to alloc_rsm_map_table

The call to alloc_rsm_map_table does not check if the kmalloc fails.
Check for a NULL on alloc, and bail if it fails.

Fixes: 372cc85a13c9 ("IB/hfi1: Extract RSM map table init from QOS")
Link: https://lore.kernel.org/r/20190715164521.74174.27047.stgit@awfm-01.aw.intel.com
Cc: <stable@vger.kernel.org>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: John Fleck <john.fleck@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Fix sg offset non-zero issue

When run perftest in many times, the system will report a BUG as follows:

   BUG: Bad rss-counter state mm:(____ptrval____) idx:0 val:-1
   BUG: Bad rss-counter state mm:(____ptrval____) idx:1 val:1

We tested with different kernel version and found it started from the the
following commit:

commit d10bcf947a3e ("RDMA/umem: Combine contiguous PAGE_SIZE regions in
SGEs")

In this commit, the sg->offset is always 0 when sg_set_page() is called in
ib_umem_get() and the drivers are not allowed to change the sgl, otherwise
it will get bad page descriptor when unfolding SGEs in __ib_umem_release()
as sg_page_count() will get wrong result while sgl->offset is not 0.

However, there is a weird sgl usage in the current hns driver, the driver
modified sg->offset after calling ib_umem_get(), which caused we iterate
past the wrong number of pages in for_each_sg_page iterator.

This patch fixes it by correcting the non-standard sgl usage found in the
hns_roce_db_map_user() function.

Fixes: d10bcf947a3e ("RDMA/umem: Combine contiguous PAGE_SIZE regions in SGEs")
Fixes: 0425e3e6e0c7 ("RDMA/hns: Support flush cqe for hip08 in kernel space")
Link: https://lore.kernel.org/r/1562808737-45723-1-git-send-email-oulijun@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/siw: Fix error return code in siw_init_module()

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: bdcf26bf9b3a ("rdma/siw: network and RDMA core interface")
Link: https://lore.kernel.org/r/20190718092710.85709-1-weiyongjun1@huawei.com
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Linus 5.3-rc1

Merge tag 'devicetree-fixes-for-5.3' of git://git./linux/kernel/git/robh/linux

Pull Devicetree fixes from Rob Herring:
 "Fix several warnings/errors in validation of binding schemas"

* tag 'devicetree-fixes-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: pinctrl: stm32: Fix missing 'clocks' property in examples
  dt-bindings: iio: ad7124: Fix dtc warnings in example
  dt-bindings: iio: avia-hx711: Fix avdd-supply typo in example
  dt-bindings: pinctrl: aspeed: Fix AST2500 example errors
  dt-bindings: pinctrl: aspeed: Fix 'compatible' schema errors
  dt-bindings: riscv: Limit cpus schema to only check RiscV 'cpu' nodes
  dt-bindings: Ensure child nodes are of type 'object'

Merge branch 'work.misc' of git://git./linux/kernel/git/viro/vfs

Pull vfs documentation typo fix from Al Viro.

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  typo fix: it's d_make_root, not d_make_inode...