ARM: mm: add missing pud_page define to 2-level page tables

Patch series "huge vmalloc mappings", v13.

The kernel virtual mapping layer grew support for mapping memory with >
PAGE_SIZE ptes with commit 0ddab1d2ed66 ("lib/ioremap.c: add huge I/O
map capability interfaces"), and implemented support for using those
huge page mappings with ioremap.

According to the submission, the use-case is mapping very large
non-volatile memory devices, which could be GB or TB:

  https://lore.kernel.org/lkml/1425404664-19675-1-git-send-email-toshi.kani@hp.com/

The benefit is said to be in the overhead of maintaining the mapping,
perhaps both in memory overhead and setup / teardown time.  Memory
overhead for the mapping with a 4kB page and 8 byte page table is 2GB
per TB of mapping, down to 4MB / TB with 2MB pages.

The same huge page vmap infrastructure can be quite easily adapted and
used for mapping vmalloc memory pages without more complexity for arch
or core vmap code.  However unlike ioremap, vmalloc page table overhead
is not a real problem, so the advantage to justify this is performance.

Several of the most structures in the kernel (e.g., vfs and network hash
tables) are allocated with vmalloc on NUMA machines, in order to
distribute access bandwidth over the machine.  Mapping these with larger
pages can improve TLB usage significantly, for example this reduces TLB
misses by nearly 30x on a `git diff` workload on a 2-node POWER9 (59,800
-> 2,100) and reduces CPU cycles by 0.54%, due to vfs hashes being
allocated with 2MB pages.

[ Other numbers?
  - The difference is even larger in a guest due to more costly TLB
    misses.
  - Eric Dumazet was keen on the network hash performance possibilities.
  - Other archs? Ding was doing x86 testing. ]

The kernel module allocator also uses vmalloc to map module images even on
non-NUMA, which can result in high iTLB pressure on highly modular distro
type of kernels.  This series does not implement huge mappings for modules
yet, but it's a step along the way.  Rick Edgecombe was looking at that
IIRC.

The per-cpu allocator similarly might be able to take advantage of this.
Also on the todo list.

The disadvantages of this I can see are:
* Memory fragmentation can waste some physical memory because it will
  attempt to allocate larger pages to fit the required size, rounding up
  (once the requested size is >= 2MB).
  - I don't see it being a big problem in practice unless some user
    crops up that allocates thousands of 2.5MB ranges. We can tewak
    heuristics a bit there if needed to reduce peak waste.
* Less granular mappings can make the NUMA distribution less balanced.
  - Similar to the above.
  - Could also allocate all major system hashes with one allocation
    up-front and spread them all across the one block, which should help
    overall NUMA distribution and reduce fragmentation waste.
* Callers might expect something about the underlying allocated pages.
  - Tried to keep the apperance of base PAGE_SIZE pages throughout the
    APIs and exposed data structures.
  - Added a VM_NO_HUGE_VMAP flag to hammer troublesome cases with.

- Finally, added a nohugevmalloc boot option to turn it off (independent
  of nohugeiomap).

This patch (of 14):

ARM uses its own PMD folding scheme which is missing pud_page which should
just pass through to pmd_page.  Move this from the 3-level page table to
common header.

Link: https://lkml.kernel.org/r/20210317062402.533919-2-npiggin@gmail.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Ding Tianhong <dingtianhong@huawei.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmalloc: use rb_tree instead of list for vread() lookups

vread() has been linearly searching vmap_area_list for looking up vmalloc
areas to read from.  These same areas are also tracked by a rb_tree
(vmap_area_root) which offers logarithmic lookup.

This patch modifies vread() to use the rb_tree structure instead of the
list and the speedup for heavy /proc/kcore readers can be pretty
significant.  Below are the wall clock measurements of a Python
application that leverages the drgn debugging library to read and
interpret data read from /proc/kcore.

Before the patch:
-----
  $ time sudo sdb -e 'dbuf | head 3000 | wc'
  (unsigned long)3000

  real 0m22.446s
  user 0m2.321s
  sys 0m20.690s
-----

With the patch:
-----
  $ time sudo sdb -e 'dbuf | head 3000 | wc'
  (unsigned long)3000

  real 0m2.104s
  user 0m2.043s
  sys 0m0.921s
-----

Link: https://lkml.kernel.org/r/20210209190253.108763-1-serapheim@delphix.com
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: unexport remap_vmalloc_range_partial

remap_vmalloc_range_partial is only used to implement remap_vmalloc_range
and by procfs.  Unexport it.

Link: https://lkml.kernel.org/r/20210301082235.932968-3-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

samples/vfio-mdev/mdpy: use remap_vmalloc_range

Patch series "remap_vmalloc_range cleanups".

This series removes an open coded instance of remap_vmalloc_range and
removes the unused remap_vmalloc_range_partial export.

This patch (of 2):

Use remap_vmalloc_range instead of open coding it using
remap_vmalloc_range_partial.

Link: https://lkml.kernel.org/r/20210301082235.932968-1-hch@lst.de
Link: https://lkml.kernel.org/r/20210301082235.932968-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/sparse: add the missing sparse_buffer_fini() in error branch

sparse_buffer_init() and sparse_buffer_fini() should appear in pair, or a
WARN issue would be through the next time sparse_buffer_init() runs.

Add the missing sparse_buffer_fini() in error branch.

Link: https://lkml.kernel.org/r/20210325113155.118574-1-wangwensheng4@huawei.com
Fixes: 85c77f791390 ("mm/sparse: add new sparse_init_nid() and sparse_init()")
Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/dmapool: switch from strlcpy to strscpy

strlcpy is marked as deprecated in Documentation/process/deprecated.rst,
and there is no functional difference when the caller expects truncation
(when not checking the return value). strscpy is relatively better as it
also avoids scanning the whole source string.

Link: https://lkml.kernel.org/r/1613962050-14188-1-git-send-email-daizhiyuan@phytium.com.cn
Signed-off-by: Zhiyuan Dai <daizhiyuan@phytium.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

selftests: add a MREMAP_DONTUNMAP selftest for shmem

This test extends the current mremap tests to validate that the
MREMAP_DONTUNMAP operation can be performed on shmem mappings.

Link: https://lkml.kernel.org/r/20210323182520.2712101-3-bgeffon@google.com
Signed-off-by: Brian Geffon <bgeffon@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Michael S . Tsirkin" <mst@redhat.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Sonny Rao <sonnyrao@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Dmitry Safonov <dima@arista.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Alejandro Colomar <alx.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Revert "mremap: don't allow MREMAP_DONTUNMAP on special_mappings and aio"

This reverts commit cd544fd1dc9293c6702fab6effa63dac1cc67e99.

As discussed in [1] this commit was a no-op because the mapping type was
checked in vma_to_resize before move_vma is ever called.  This meant that
vm_ops->mremap() would never be called on such mappings.  Furthermore,
we've since expanded support of MREMAP_DONTUNMAP to non-anonymous
mappings, and these special mappings are still protected by the existing
check of !VM_DONTEXPAND and !VM_PFNMAP which will result in a -EINVAL.

1. https://lkml.org/lkml/2020/12/28/2340

Link: https://lkml.kernel.org/r/20210323182520.2712101-2-bgeffon@google.com
Signed-off-by: Brian Geffon <bgeffon@google.com>
Acked-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Alejandro Colomar <alx.manpages@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: "Michael S . Tsirkin" <mst@redhat.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Sonny Rao <sonnyrao@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: extend MREMAP_DONTUNMAP to non-anonymous mappings

Patch series "mm: Extend MREMAP_DONTUNMAP to non-anonymous mappings", v5.

This patch (of 3):

Currently MREMAP_DONTUNMAP only accepts private anonymous mappings.  This
restriction was placed initially for simplicity and not because there
exists a technical reason to do so.

This change will widen the support to include any mappings which are not
VM_DONTEXPAND or VM_PFNMAP.  The primary use case is to support
MREMAP_DONTUNMAP on mappings which may have been created from a memfd.
This change will result in mremap(MREMAP_DONTUNMAP) returning -EINVAL if
VM_DONTEXPAND or VM_PFNMAP mappings are specified.

Lokesh Gidra who works on the Android JVM, provided an explanation of how
such a feature will improve Android JVM garbage collection: "Android is
developing a new garbage collector (GC), based on userfaultfd.  The
garbage collector will use userfaultfd (uffd) on the java heap during
compaction.  On accessing any uncompacted page, the application threads
will find it missing, at which point the thread will create the compacted
page and then use UFFDIO_COPY ioctl to get it mapped and then resume
execution.  Before starting this compaction, in a stop-the-world pause the
heap will be mremap(MREMAP_DONTUNMAP) so that the java heap is ready to
receive UFFD_EVENT_PAGEFAULT events after resuming execution.

To speedup mremap operations, pagetable movement was optimized by moving
PUD entries instead of PTE entries [1].  It was necessary as mremap of
even modest sized memory ranges also took several milliseconds, and
stopping the application for that long isn't acceptable in response-time
sensitive cases.

With UFFDIO_CONTINUE feature [2], it will be even more efficient to
implement this GC, particularly the 'non-moveable' portions of the heap.
It will also help in reducing the need to copy (UFFDIO_COPY) the pages.
However, for this to work, the java heap has to be on a 'shared' vma.
Currently MREMAP_DONTUNMAP only supports private anonymous mappings, this
patch will enable using UFFDIO_CONTINUE for the new userfaultfd-based heap
compaction."

[1] https://lore.kernel.org/linux-mm/20201215030730.NC3CU98e4%25akpm@linux-foundation.org/
[2] https://lore.kernel.org/linux-mm/20210302000133.272579-1-axelrasmussen@google.com/

Link: https://lkml.kernel.org/r/20210323182520.2712101-1-bgeffon@google.com
Signed-off-by: Brian Geffon <bgeffon@google.com>
Acked-by: Hugh Dickins <hughd@google.com>
Tested-by: Lokesh Gidra <lokeshgidra@google.com>
Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Alejandro Colomar <alx.manpages@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: "Michael S . Tsirkin" <mst@redhat.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Sonny Rao <sonnyrao@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

NUMA balancing: reduce TLB flush via delaying mapping on hint page fault

With NUMA balancing, in hint page fault handler, the faulting page will be
migrated to the accessing node if necessary.  During the migration, TLB
will be shot down on all CPUs that the process has run on recently.
Because in the hint page fault handler, the PTE will be made accessible
before the migration is tried.  The overhead of TLB shooting down can be
high, so it's better to be avoided if possible.  In fact, if we delay
mapping the page until migration, that can be avoided.  This is what this
patch doing.

For the multiple threads applications, it's possible that a page is
accessed by multiple threads almost at the same time.  In the original
implementation, because the first thread will install the accessible PTE
before migrating the page, the other threads may access the page directly
before the page is made inaccessible again during migration.  While with
the patch, the second thread will go through the page fault handler too.
And because of the PageLRU() checking in the following code path,

  migrate_misplaced_page()
    numamigrate_isolate_page()
      isolate_lru_page()

the migrate_misplaced_page() will return 0, and the PTE will be made
accessible in the second thread.

This will introduce a little more overhead.  But we think the possibility
for a page to be accessed by the multiple threads at the same time is low,
and the overhead difference isn't too large.  If this becomes a problem in
some workloads, we need to consider how to reduce the overhead.

To test the patch, we run a test case as follows on a 2-socket Intel
server (1 NUMA node per socket) with 128GB DRAM (64GB per socket).

1. Run a memory eater on NUMA node 1 to use 40GB memory before running
   pmbench.

2. Run pmbench (normal accessing pattern) with 8 processes, and 8
   threads per process, so there are 64 threads in total.  The
   working-set size of each process is 8960MB, so the total working-set
   size is 8 * 8960MB = 70GB.  The CPU of all pmbench processes is bound
   to node 1.  The pmbench processes will access some DRAM on node 0.

3. After the pmbench processes run for 10 seconds, kill the memory
   eater.  Now, some pages will be migrated from node 0 to node 1 via
   NUMA balancing.

Test results show that, with the patch, the pmbench throughput (page
accesses/s) increases 5.5%.  The number of the TLB shootdowns interrupts
reduces 98% (from ~4.7e7 to ~9.7e5) with about 9.2e6 pages (35.8GB)
migrated.  From the perf profile, it can be found that the CPU cycles
spent by try_to_unmap() and its callees reduces from 6.02% to 0.47%.  That
is, the CPU cycles spent by TLB shooting down decreases greatly.

Link: https://lkml.kernel.org/r/20210408132236.1175607-1-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Mel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Matthew Wilcox" <willy@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Michel Lespinasse <walken@google.com>
Cc: Arjun Roy <arjunroy@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

i915: fix remap_io_sg to verify the pgprot

remap_io_sg claims that the pgprot is pre-verified using an io_mapping,
but actually does not get passed an io_mapping and just uses the pgprot in
the VMA.  Remove the apply_to_page_range abuse and just loop over
remap_pfn_range for each segment.

Note: this could use io_mapping_map_user by passing an iomap to
remap_io_sg if the maintainers can verify that the pgprot in the iomap in
the only caller is indeed the desired one here.

Link: https://lkml.kernel.org/r/20210326055505.1424432-5-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

i915: use io_mapping_map_user

Replace the home-grown remap_io_mapping that abuses apply_to_page_range
with the proper io_mapping_map_user interface.

Link: https://lkml.kernel.org/r/20210326055505.1424432-4-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: add a io_mapping_map_user helper

Add a helper that calls remap_pfn_range for an struct io_mapping, relying
on the pgprot pre-validation done when creating the mapping instead of
doing it at runtime.

Link: https://lkml.kernel.org/r/20210326055505.1424432-3-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: add remap_pfn_range_notrack

Patch series "add remap_pfn_range_notrack instead of reinventing it in i915", v2.

i915 has some reason to want to avoid the track_pfn_remap overhead in
remap_pfn_range.  Add a function to the core VM to do just that rather
than reinventing the functionality poorly in the driver.

Note that the remap_io_sg path does get exercises when using Xorg on my
Thinkpad X1, so this should be considered lightly tested, I've not managed
to hit the remap_io_mapping path at all.

This patch (of 4):

Add a version of remap_pfn_range that does not call track_pfn_range.  This
will be used to fix horrible abuses of VM internals in the i915 driver.

Link: https://lkml.kernel.org/r/20210326055505.1424432-1-hch@lst.de
Link: https://lkml.kernel.org/r/20210326055505.1424432-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, tracing: improve rss_stat tracepoint message

Adjust the rss_stat tracepoint to print the name of the resident page type
that got updated (e.g. MM_ANONPAGES/MM_FILEPAGES), rather than the numeric
index corresponding to it (the __entry->member value):

Before this patch:
------------------
  rss_stat: mm_id=1216113068 curr=0 member=1 size=28672B
  rss_stat: mm_id=1216113068 curr=0 member=1 size=0B
  rss_stat: mm_id=534402304 curr=1 member=0 size=188416B
  rss_stat: mm_id=534402304 curr=1 member=1 size=40960B

After this patch:
-----------------
  rss_stat: mm_id=1726253524 curr=1 type=MM_ANONPAGES size=40960B
  rss_stat: mm_id=1726253524 curr=1 type=MM_FILEPAGES size=663552B
  rss_stat: mm_id=1726253524 curr=1 type=MM_ANONPAGES size=65536B
  rss_stat: mm_id=1726253524 curr=1 type=MM_FILEPAGES size=647168B

Use TRACE_DEFINE_ENUM()/__print_symbolic() logic to map the enum values to
the strings they represent, so that userspace tools can also parse the raw
data correctly.

Link: https://lkml.kernel.org/r/20210310162305.4862-1-ovidiu.panait@windriver.com
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Suggested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86/vmemmap: optimize for consecutive sections in partial populated PMDs

We can optimize in the case we are adding consecutive sections, so no
memset(PAGE_UNUSED) is needed.

In that case, let us keep track where the unused range of the previous
memory range begins, so we can compare it with start of the range to be
added.  If they are equal, we know sections are added consecutively.

For that purpose, let us introduce 'unused_pmd_start', which always holds
the beginning of the unused memory range.

In the case a section does not contiguously follow the previous one, we
know we can memset [unused_pmd_start, PMD_BOUNDARY) with PAGE_UNUSE.

This patch is based on a similar patch by David Hildenbrand:

https://lore.kernel.org/linux-mm/20200722094558.9828-10-david@redhat.com/

Link: https://lkml.kernel.org/r/20210309214050.4674-5-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86/vmemmap: handle unpopulated sub-pmd ranges

When sizeof(struct page) is not a power of 2, sections do not span a PMD
anymore and so when populating them some parts of the PMD will remain
unused.

Because of this, PMDs will be left behind when depopulating sections since
remove_pmd_table() thinks that those unused parts are still in use.

Fix this by marking the unused parts with PAGE_UNUSED, so memchr_inv()
will do the right thing and will let us free the PMD when the last user of
it is gone.

This patch is based on a similar patch by David Hildenbrand:

https://lore.kernel.org/linux-mm/20200722094558.9828-9-david@redhat.com/

[osalvador@suse.de: go back to the ifdef version]
Link: https://lkml.kernel.org/r/YGy++mSft7K4u+88@localhost.localdomain
Link: https://lkml.kernel.org/r/20210309214050.4674-4-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86/vmemmap: drop handling of 1GB vmemmap ranges

There is no code to allocate 1GB pages when mapping the vmemmap range as
this might waste some memory and requires more complexity which is not
really worth.

Drop the dead code both for the aligned and unaligned cases and leave only
the direct map handling.

Link: https://lkml.kernel.org/r/20210309214050.4674-3-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Suggested-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86/vmemmap: drop handling of 4K unaligned vmemmap range

Patch series "Cleanup and fixups for vmemmap handling", v6.

This series contains cleanups to remove dead code that handles unaligned
cases for 4K and 1GB pages (patch#1 and patch#2) when removing the vemmmap
range, and a fix (patch#3) to handle the case when two vmemmap ranges
intersect the same PMD.

This patch (of 4):

remove_pte_table() is prepared to handle the case where either the start
or the end of the range is not PAGE aligned.  This cannot actually happen:

__populate_section_memmap enforces the range to be PMD aligned, so as long
as the size of the struct page remains multiple of 8, the vmemmap range
will be aligned to PAGE_SIZE.

Drop the dead code and place a VM_BUG_ON in vmemmap_{populate,free} to
catch nasty cases.  Note that the VM_BUG_ON is placed in there because
vmemmap_{populate,free= } is the gate of all removing and freeing page
tables logic.

Link: https://lkml.kernel.org/r/20210309214050.4674-1-osalvador@suse.de
Link: https://lkml.kernel.org/r/20210309214050.4674-2-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Suggested-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/interval_tree: add comments to improve code readability

Add a comment explaining the value of the ISSTATIC parameter, Inform the
reader that this is not a coding style issue.

Link: https://lkml.kernel.org/r/1613964695-17614-1-git-send-email-daizhiyuan@phytium.com.cn
Signed-off-by: Zhiyuan Dai <daizhiyuan@phytium.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memory.c: do_numa_page(): delete bool "migrated"

Smatch gives the warning:

  do_numa_page() warn: assigning (-11) to unsigned variable 'migrated'

Link: https://lkml.kernel.org/r/1614603421-2681-1-git-send-email-wangqing@vivo.com
Signed-off-by: Wang Qing <wangqing@vivo.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: page_counter: mitigate consequences of a page_counter underflow

When the unsigned page_counter underflows, even just by a few pages, a
cgroup will not be able to run anything afterwards and trigger the OOM
killer in a loop.

Underflows shouldn't happen, but when they do in practice, we may just be
off by a small amount that doesn't interfere with the normal operation -
consequences don't need to be that dire.

Reset the page_counter to 0 upon underflow.  We'll issue a warning that
the accounting will be off and then try to keep limping along.

[ We used to do this with the original res_counter, where it was a
  more straight-forward correction inside the spinlock section. I
  didn't carry it forward into the lockless page counters for
  simplicity, but it turns out this is quite useful in practice. ]

Link: https://lkml.kernel.org/r/20210408143155.2679744-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Chris Down <chris@chrisdown.name>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

linux/memcontrol.h: remove duplicate struct declaration

struct mem_cgroup is declared twice.  One has been declared at forward
struct declaration.  Remove the duplicate.

Link: https://lkml.kernel.org/r/20210330020246.2265371-1-wanjiabing@vivo.com
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcontrol: move PageMemcgKmem to the scope of CONFIG_MEMCG_KMEM

The page only can be marked as kmem when CONFIG_MEMCG_KMEM is enabled.
So move PageMemcgKmem() to the scope of the CONFIG_MEMCG_KMEM.

As a bonus, on !CONFIG_MEMCG_KMEM build some code can be compiled out.

Link: https://lkml.kernel.org/r/20210319163821.20704-8-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcontrol: inline __memcg_kmem_{un}charge() into obj_cgroup_{un}charge_pages()

There is only one user of __memcg_kmem_charge(), so manually inline
__memcg_kmem_charge() to obj_cgroup_charge_pages().  Similarly manually
inline __memcg_kmem_uncharge() into obj_cgroup_uncharge_pages() and call
obj_cgroup_uncharge_pages() in obj_cgroup_release().

This is just code cleanup without any functionality changes.

Link: https://lkml.kernel.org/r/20210319163821.20704-7-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcontrol: use obj_cgroup APIs to charge kmem pages

Since Roman's series "The new cgroup slab memory controller" applied.
All slab objects are charged via the new APIs of obj_cgroup.  The new
APIs introduce a struct obj_cgroup to charge slab objects.  It prevents
long-living objects from pinning the original memory cgroup in the
memory.  But there are still some corner objects (e.g.  allocations
larger than order-1 page on SLUB) which are not charged via the new
APIs.  Those objects (include the pages which are allocated from buddy
allocator directly) are charged as kmem pages which still hold a
reference to the memory cgroup.

We want to reuse the obj_cgroup APIs to charge the kmem pages.  If we do
that, we should store an object cgroup pointer to page->memcg_data for
the kmem pages.

Finally, page->memcg_data will have 3 different meanings.

  1) For the slab pages, page->memcg_data points to an object cgroups
     vector.

  2) For the kmem pages (exclude the slab pages), page->memcg_data
     points to an object cgroup.

  3) For the user pages (e.g. the LRU pages), page->memcg_data points
     to a memory cgroup.

We do not change the behavior of page_memcg() and page_memcg_rcu().  They
are also suitable for LRU pages and kmem pages.  Why?

Because memory allocations pinning memcgs for a long time - it exists at a
larger scale and is causing recurring problems in the real world: page
cache doesn't get reclaimed for a long time, or is used by the second,
third, fourth, ...  instance of the same job that was restarted into a new
cgroup every time.  Unreclaimable dying cgroups pile up, waste memory, and
make page reclaim very inefficient.

We can convert LRU pages and most other raw memcg pins to the objcg
direction to fix this problem, and then the page->memcg will always point
to an object cgroup pointer.  At that time, LRU pages and kmem pages will
be treated the same.  The implementation of page_memcg() will remove the
kmem page check.

This patch aims to charge the kmem pages by using the new APIs of
obj_cgroup.  Finally, the page->memcg_data of the kmem page points to an
object cgroup.  We can use the __page_objcg() to get the object cgroup
associated with a kmem page.  Or we can use page_memcg() to get the memory
cgroup associated with a kmem page, but caller must ensure that the
returned memcg won't be released (e.g.  acquire the rcu_read_lock or
css_set_lock).

Link: https://lkml.kernel.org/r/20210401030141.37061-1-songmuchun@bytedance.com
Link: https://lkml.kernel.org/r/20210319163821.20704-6-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
[songmuchun@bytedance.com: fix forget to obtain the ref to objcg in split_page_memcg]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcontrol: change ug->dummy_page only if memcg changed

Just like assignment to ug->memcg, we only need to update ug->dummy_page
if memcg changed.  So move it to there.  This is a very small
optimization.

Link: https://lkml.kernel.org/r/20210319163821.20704-5-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcontrol: directly access page->memcg_data in mm/page_alloc.c

page_memcg() is not suitable for use by page_expected_state() and
page_bad_reason().  Because it can BUG_ON() for the slab pages when
CONFIG_DEBUG_VM is enabled.  As neither lru, nor kmem, nor slab page
should have anything left in there by the time the page is freed, what
we care about is whether the value of page->memcg_data is 0.  So just
directly access page->memcg_data here.

Link: https://lkml.kernel.org/r/20210319163821.20704-4-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcontrol: introduce obj_cgroup_{un}charge_pages

We know that the unit of slab object charging is bytes, the unit of kmem
page charging is PAGE_SIZE.  If we want to reuse obj_cgroup APIs to
charge the kmem pages, we should pass PAGE_SIZE (as third parameter) to
obj_cgroup_charge().  Because the size is already PAGE_SIZE, we can skip
touch the objcg stock.  And obj_cgroup_{un}charge_pages() are introduced
to charge in units of page level.

In the latter patch, we also can reuse those two helpers to charge or
uncharge a number of kernel pages to a object cgroup.  This is just a
code movement without any functional changes.

Link: https://lkml.kernel.org/r/20210319163821.20704-3-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcontrol: slab: fix obtain a reference to a freeing memcg

Patch series "Use obj_cgroup APIs to charge kmem pages", v5.

Since Roman's series "The new cgroup slab memory controller" applied.
All slab objects are charged with the new APIs of obj_cgroup.  The new
APIs introduce a struct obj_cgroup to charge slab objects.  It prevents
long-living objects from pinning the original memory cgroup in the
memory.  But there are still some corner objects (e.g.  allocations
larger than order-1 page on SLUB) which are not charged with the new
APIs.  Those objects (include the pages which are allocated from buddy
allocator directly) are charged as kmem pages which still hold a
reference to the memory cgroup.

E.g.  We know that the kernel stack is charged as kmem pages because the
size of the kernel stack can be greater than 2 pages (e.g.  16KB on
x86_64 or arm64).  If we create a thread (suppose the thread stack is
charged to memory cgroup A) and then move it from memory cgroup A to
memory cgroup B.  Because the kernel stack of the thread hold a
reference to the memory cgroup A.  The thread can pin the memory cgroup
A in the memory even if we remove the cgroup A.  If we want to see this
scenario by using the following script.  We can see that the system has
added 500 dying cgroups (This is not a real world issue, just a script
to show that the large kmallocs are charged as kmem pages which can pin
the memory cgroup in the memory).

#!/bin/bash

cat /proc/cgroups | grep memory

cd /sys/fs/cgroup/memory
echo 1 > memory.move_charge_at_immigrate

for i in range{1..500}
do
mkdir kmem_test
echo $$ > kmem_test/cgroup.procs
sleep 3600 &
echo $$ > cgroup.procs
echo `cat kmem_test/cgroup.procs` > cgroup.procs
rmdir kmem_test
done

cat /proc/cgroups | grep memory

This patchset aims to make those kmem pages to drop the reference to
memory cgroup by using the APIs of obj_cgroup.  Finally, we can see that
the number of the dying cgroups will not increase if we run the above test
script.

This patch (of 7):

The rcu_read_lock/unlock only can guarantee that the memcg will not be
freed, but it cannot guarantee the success of css_get (which is in the
refill_stock when cached memcg changed) to memcg.

  rcu_read_lock()
  memcg = obj_cgroup_memcg(old)
  __memcg_kmem_uncharge(memcg)
      refill_stock(memcg)
          if (stock->cached != memcg)
              // css_get can change the ref counter from 0 back to 1.
              css_get(&memcg->css)
  rcu_read_unlock()

This fix is very like the commit:

  eefbfa7fd678 ("mm: memcg/slab: fix use after free in obj_cgroup_charge")

Fix this by holding a reference to the memcg which is passed to the
__memcg_kmem_uncharge() before calling __memcg_kmem_uncharge().

Link: https://lkml.kernel.org/r/20210319163821.20704-1-songmuchun@bytedance.com
Link: https://lkml.kernel.org/r/20210319163821.20704-2-songmuchun@bytedance.com
Fixes: 3de7d4f25a74 ("mm: memcg/slab: optimize objcg stock draining")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: charge before adding to swapcache on swapin

Currently the kernel adds the page, allocated for swapin, to the
swapcache before charging the page.  This is fine but now we want a
per-memcg swapcache stat which is essential for folks who wants to
transparently migrate from cgroup v1's memsw to cgroup v2's memory and
swap counters.  In addition charging a page before exposing it to other
parts of the kernel is a step in the right direction.

To correctly maintain the per-memcg swapcache stat, this patch has
adopted to charge the page before adding it to swapcache.  One challenge
in this option is the failure case of add_to_swap_cache() on which we
need to undo the mem_cgroup_charge().  Specifically undoing
mem_cgroup_uncharge_swap() is not simple.

To resolve the issue, this patch decouples the charging for swapin pages
from mem_cgroup_charge().  Two new functions are introduced,
mem_cgroup_swapin_charge_page() for just charging the swapin page and
mem_cgroup_swapin_uncharge_swap() for uncharging the swap slot once the
page has been successfully added to the swapcache.

[shakeelb@google.com: set page->private before calling swap_readpage]
Link: https://lkml.kernel.org/r/20210318015959.2986837-1-shakeelb@google.com
Link: https://lkml.kernel.org/r/20210305212639.775498-1-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Hugh Dickins <hughd@google.com>
Tested-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kselftests: cgroup: update kmem test for new vmstat implementation

With memcg having switched to rstat, memory.stat output is precise.
Update the cgroup selftest to reflect the expectations and error
tolerances of the new implementation.

Also add newly tracked types of memory to the memory.stat side of the
equation, since they're included in memory.current and could throw false
positives.

Link: https://lkml.kernel.org/r/20210209163304.77088-9-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcontrol: consolidate lruvec stat flushing

There are two functions to flush the per-cpu data of an lruvec into the
rest of the cgroup tree: when the cgroup is being freed, and when a CPU
disappears during hotplug.  The difference is whether all CPUs or just
one is being collected, but the rest of the flushing code is the same.
Merge them into one function and share the common code.

Link: https://lkml.kernel.org/r/20210209163304.77088-8-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcontrol: switch to rstat

Replace the memory controller's custom hierarchical stats code with the
generic rstat infrastructure provided by the cgroup core.

The current implementation does batched upward propagation from the
write side (i.e.  as stats change).  The per-cpu batches introduce an
error, which is multiplied by the number of subgroups in a tree.  In
systems with many CPUs and sizable cgroup trees, the error can be large
enough to confuse users (e.g.  32 batch pages * 32 CPUs * 32 subgroups
results in an error of up to 128M per stat item).  This can entirely
swallow allocation bursts inside a workload that the user is expecting
to see reflected in the statistics.

In the past, we've done read-side aggregation, where a memory.stat read
would have to walk the entire subtree and add up per-cpu counts.  This
became problematic with lazily-freed cgroups: we could have large
subtrees where most cgroups were entirely idle.  Hence the switch to
change-driven upward propagation.  Unfortunately, it needed to trade
accuracy for speed due to the write side being so hot.

Rstat combines the best of both worlds: from the write side, it cheaply
maintains a queue of cgroups that have pending changes, so that the read
side can do selective tree aggregation.  This way the reported stats
will always be precise and recent as can be, while the aggregation can
skip over potentially large numbers of idle cgroups.

The way rstat works is that it implements a tree for tracking cgroups
with pending local changes, as well as a flush function that walks the
tree upwards.  The controller then drives this by 1) telling rstat when
a local cgroup stat changes (e.g.  mod_memcg_state) and 2) when a flush
is required to get uptodate hierarchy stats for a given subtree (e.g.
when memory.stat is read).  The controller also provides a flush
callback that is called during the rstat flush walk for each cgroup and
aggregates its local per-cpu counters and propagates them upwards.

This adds a second vmstats to struct mem_cgroup (MEMCG_NR_STAT +
NR_VM_EVENT_ITEMS) to track pending subtree deltas during upward
aggregation.  It removes 3 words from the per-cpu data.  It eliminates
memcg_exact_page_state(), since memcg_page_state() is now exact.

[akpm@linux-foundation.org: merge fix]
[hannes@cmpxchg.org: fix a sleep in atomic section problem]
Link: https://lkml.kernel.org/r/20210315234100.64307-1-hannes@cmpxchg.org
Link: https://lkml.kernel.org/r/20210209163304.77088-7-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cgroup: rstat: punt root-level optimization to individual controllers

Current users of the rstat code can source root-level statistics from
the native counters of their respective subsystem, allowing them to
forego aggregation at the root level.  This optimization is currently
implemented inside the generic rstat code, which doesn't track the root
cgroup and doesn't invoke the subsystem flush callbacks on it.

However, the memory controller cannot do this optimization, because
cgroup1 breaks out memory specifically for the local level, including at
the root level.  In preparation for the memory controller switching to
rstat, move the optimization from rstat core to the controllers.

Afterwards, rstat will always track the root cgroup for changes and
invoke the subsystem callbacks on it; and it's up to the subsystem to
special-case and skip aggregation of the root cgroup if it can source
this information through other, cheaper means.

This is the case for the io controller and the cgroup base stats.  In
their respective flush callbacks, check whether the parent is the root
cgroup, and if so, skip the unnecessary upward propagation.

The extra cost of tracking the root cgroup is negligible: on stat
changes, we actually remove a branch that checks for the root.  The
queueing for a flush touches only per-cpu data, and only the first stat
change since a flush requires a (per-cpu) lock.

Link: https://lkml.kernel.org/r/20210209163304.77088-6-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cgroup: rstat: support cgroup1

Rstat currently only supports the default hierarchy in cgroup2.  In
order to replace memcg's private stats infrastructure - used in both
cgroup1 and cgroup2 - with rstat, the latter needs to support cgroup1.

The initialization and destruction callbacks for regular cgroups are
already in place.  Remove the cgroup_on_dfl() guards to handle cgroup1.

The initialization of the root cgroup is currently hardcoded to only
handle cgrp_dfl_root.cgrp.  Move those callbacks to cgroup_setup_root()
and cgroup_destroy_root() to handle the default root as well as the
various cgroup1 roots we may set up during mounting.

The linking of css to cgroups happens in code shared between cgroup1 and
cgroup2 as well.  Simply remove the cgroup_on_dfl() guard.

Linkage of the root css to the root cgroup is a bit trickier: per
default, the root css of a subsystem controller belongs to the default
hierarchy (i.e.  the cgroup2 root).  When a controller is mounted in its
cgroup1 version, the root css is stolen and moved to the cgroup1 root;
on unmount, the css moves back to the default hierarchy.  Annotate
rebind_subsystems() to move the root css linkage along between roots.

Link: https://lkml.kernel.org/r/20210209163304.77088-5-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcontrol: privatize memcg_page_state query functions

There are no users outside of the memory controller itself. The rest
of the kernel cares either about node or lruvec stats.

Link: https://lkml.kernel.org/r/20210209163304.77088-4-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcontrol: kill mem_cgroup_nodeinfo()

No need to encapsulate a simple struct member access.

Link: https://lkml.kernel.org/r/20210209163304.77088-3-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcontrol: fix cpuhotplug statistics flushing

Patch series "mm: memcontrol: switch to rstat", v3.

This series converts memcg stats tracking to the streamlined rstat
infrastructure provided by the cgroup core code.  rstat is already used by
the CPU controller and the IO controller.  This change is motivated by
recent accuracy problems in memcg's custom stats code, as well as the
benefits of sharing common infra with other controllers.

The current memcg implementation does batched tree aggregation on the
write side: local stat changes are cached in per-cpu counters, which are
then propagated upward in batches when a threshold (32 pages) is exceeded.
This is cheap, but the error introduced by the lazy upward propagation
adds up: 32 pages times CPUs times cgroups in the subtree.  We've had
complaints from service owners that the stats do not reliably track and
react to allocation behavior as expected, sometimes swallowing the results
of entire test applications.

The original memcg stat implementation used to do tree aggregation
exclusively on the read side: local stats would only ever be tracked in
per-cpu counters, and a memory.stat read would iterate the entire subtree
and sum those counters up.  This didn't keep up with the times:

 - Cgroup trees are much bigger now. We switched to lazily-freed
   cgroups, where deleted groups would hang around until their remaining
   page cache has been reclaimed. This can result in large subtrees that
   are expensive to walk, while most of the groups are idle and their
   statistics don't change much anymore.

 - Automated monitoring increased. With the proliferation of userspace
   oom killing, proactive reclaim, and higher-resolution logging of
   workload trends in general, top-level stat files are polled at least
   once a second in many deployments.

 - The lifetime of cgroups got shorter. Where most cgroup setups in the
   past would have a few large policy-oriented cgroups for everything
   running on the system, newer cgroup deployments tend to create one
   group per application - which gets deleted again as the processes
   exit. An aggregation scheme that doesn't retain child data inside the
   parents loses event history of the subtree.

Rstat addresses all three of those concerns through intelligent,
persistent read-side aggregation.  As statistics change at the local
level, rstat tracks - on a per-cpu basis - only those parts of a subtree
that have changes pending and require aggregation.  The actual
aggregation occurs on the colder read side - which can now skip over
(potentially large) numbers of recently idle cgroups.

===

The test_kmem cgroup selftest is currently failing due to excessive
cumulative vmstat drift from 100 subgroups:

    ok 1 test_kmem_basic
    memory.current = 8810496
    slab + anon + file + kernel_stack = 17074568
    slab = 6101384
    anon = 946176
    file = 0
    kernel_stack = 10027008
    not ok 2 test_kmem_memcg_deletion
    ok 3 test_kmem_proc_kpagecgroup
    ok 4 test_kmem_kernel_stacks
    ok 5 test_kmem_dead_cgroups
    ok 6 test_percpu_basic

As you can see, memory.stat items far exceed memory.current.  The kernel
stack alone is bigger than all of charged memory.  That's because the
memory of the test has been uncharged from memory.current, but the
negative vmstat deltas are still sitting in the percpu caches.

The test at this time isn't even counting percpu, pagetables etc.  yet,
which would further contribute to the error.  The last patch in the series
updates the test to include them - as well as reduces the vmstat
tolerances in general to only expect page_counter batching.

With all patches applied, the (now more stringent) test succeeds:

    ok 1 test_kmem_basic
    ok 2 test_kmem_memcg_deletion
    ok 3 test_kmem_proc_kpagecgroup
    ok 4 test_kmem_kernel_stacks
    ok 5 test_kmem_dead_cgroups
    ok 6 test_percpu_basic

===

A kernel build test confirms that overhead is comparable.  Two kernels are
built simultaneously in a nested tree with several idle siblings:

root - kernelbuild - one - two - three - four - build-a (defconfig, make -j16)
                                             `- build-b (defconfig, make -j16)
                                             `- idle-1
                                             `- ...
                                             `- idle-9

During the builds, kernelbuild/memory.stat is read once a second.

A perf diff shows that the changes in cycle distribution is
minimal. Top 10 kernel symbols:

     0.09%     +0.08%  [kernel.kallsyms]                       [k] __mod_memcg_lruvec_state
     0.00%     +0.06%  [kernel.kallsyms]                       [k] cgroup_rstat_updated
     0.08%     -0.05%  [kernel.kallsyms]                       [k] __mod_memcg_state.part.0
     0.16%     -0.04%  [kernel.kallsyms]                       [k] release_pages
     0.00%     +0.03%  [kernel.kallsyms]                       [k] __count_memcg_events
     0.01%     +0.03%  [kernel.kallsyms]                       [k] mem_cgroup_charge_statistics.constprop.0
     0.10%     -0.02%  [kernel.kallsyms]                       [k] get_mem_cgroup_from_mm
     0.05%     -0.02%  [kernel.kallsyms]                       [k] mem_cgroup_update_lru_size
     0.57%     +0.01%  [kernel.kallsyms]                       [k] asm_exc_page_fault

===

The on-demand aggregated stats are now fully accurate:

$ grep -e nr_inactive_file /proc/vmstat | awk '{print($1,$2*4096)}'; \
  grep -e inactive_file /sys/fs/cgroup/memory.stat

vanilla:                              patched:
nr_inactive_file 1574105088           nr_inactive_file 1027801088
   inactive_file 1577410560              inactive_file 1027801088

===

This patch (of 8):

The memcg hotunplug callback erroneously flushes counts on the local CPU,
not the counts of the CPU going away; those counts will be lost.

Flush the CPU that is actually going away.

Also simplify the code a bit by using mod_memcg_state() and
count_memcg_events() instead of open-coding the upward flush - this is
comparable to how vmstat.c handles hotunplug flushing.

Link: https://lkml.kernel.org/r/20210209163304.77088-1-hannes@cmpxchg.org
Link: https://lkml.kernel.org/r/20210209163304.77088-2-hannes@cmpxchg.org
Fixes: a983b5ebee572 ("mm: memcontrol: fix excessive complexity in memory.stat reporting")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: enable memcg oom-kill for __GFP_NOFAIL

In the era of async memcg oom-killer, the commit a0d8b00a3381 ("mm: memcg:
do not declare OOM from __GFP_NOFAIL allocations") added the code to skip
memcg oom-killer for __GFP_NOFAIL allocations.  The reason was that the
__GFP_NOFAIL callers will not enter aync oom synchronization path and will
keep the task marked as in memcg oom.  At that time the tasks marked in
memcg oom can bypass the memcg limits and the oom synchronization would
have happened later in the later userspace triggered page fault.  Thus
letting the task marked as under memcg oom bypass the memcg limit for
arbitrary time.

With the synchronous memcg oom-killer (commit 29ef680ae7c21 ("memcg, oom:
move out_of_memory back to the charge path")) and not letting the task
marked under memcg oom to bypass the memcg limits (commit 1f14c1ac19aa4
("mm: memcg: do not allow task about to OOM kill to bypass the limit")),
we can again allow __GFP_NOFAIL allocations to trigger memcg oom-kill.
This will make memcg oom behavior closer to page allocator oom behavior.

Link: https://lkml.kernel.org/r/20210223204337.2785120-1-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: cleanup root memcg checks

Replace the implicit checking of root memcg with explicit root memcg
checking i.e.  !css->parent with mem_cgroup_is_root().

Link: https://lkml.kernel.org/r/20210223205625.2792891-1-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcontrol: fix kernel stack account

For simplification commit 991e7673859e ("mm: memcontrol: account kernel
stack per node") changed the per zone vmalloc backed stack pages
accounting to per node.

By doing that we have lost a certain precision because those pages might
live in different NUMA nodes.  In the end NR_KERNEL_STACK_KB exported to
the userspace might be over estimated on some nodes while underestimated
on others.  But this is not a real world problem, just a problem found
by reading the code.  So there is no actual data to showing how much
impact it has on users.

This doesn't impose any real problem to correctnes of the kernel
behavior as the counter is not used for any internal processing but it
can cause some confusion to the userspace.

Address the problem by accounting each vmalloc backing page to its own
node.

Link: https://lkml.kernel.org/r/20210303151843.81156-1-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memremap.c: fix improper SPDX comment style

Replace /* */ comment with //, fix SPDX comment style.

see: Documentation/process/license-rules.rst

Link: https://lkml.kernel.org/r/1614223348-15516-1-git-send-email-daizhiyuan@phytium.com.cn
Signed-off-by: Zhiyuan Dai <daizhiyuan@phytium.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: gup: remove FOLL_SPLIT

Since commit 5a52c9df62b4 ("uprobe: use FOLL_SPLIT_PMD instead of
FOLL_SPLIT") and commit ba925fa35057 ("s390/gmap: improve THP splitting")
FOLL_SPLIT has not been used anymore.  Remove the dead code.

Link: https://lkml.kernel.org/r/20210330203900.9222-1-shy828301@gmail.com
Signed-off-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

RDMA/umem: batch page unpin in __ib_umem_release()

Use the newly added unpin_user_page_range_dirty_lock() for more quickly
unpinning a consecutive range of pages represented as compound pages.
This will also calculate number of pages to unpin (for the tail pages
which matching head page) and thus batch the refcount update.

Running a test program which calls memory range reg/unreg on a region 1G
in size and measures cost of both operations together (in a guest using
rxe) with THP and hugetlbfs:

Before:
  590 rounds in 5.003 sec: 8480.335 usec / round
  6898 rounds in 60.001 sec: 8698.367 usec / round

After:
  2688 rounds in 5.002 sec: 1860.786 usec / round
  32517 rounds in 60.001 sec: 1845.225 usec / round

Link: https://lkml.kernel.org/r/20210212130843.13865-5-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Acked-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Doug Ledford <dledford@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/gup: add a range variant of unpin_user_pages_dirty_lock()

Add an unpin_user_page_range_dirty_lock() API which takes a starting page
and how many consecutive pages we want to unpin and optionally dirty.

To that end, define another iterator for_each_compound_range() that
operates in page ranges as opposed to page array.

For users (like RDMA mr_dereg) where each sg represents a contiguous set
of pages, we're able to more efficiently unpin pages without having to
supply an array of pages much of what happens today with
unpin_user_pages().

Link: https://lkml.kernel.org/r/20210212130843.13865-4-joao.m.martins@oracle.com
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/gup: decrement head page once for group of subpages

Rather than decrementing the head page refcount one by one, we walk the
page array and checking which belong to the same compound_head.  Later on
we decrement the calculated amount of references in a single write to the
head page.  To that end switch to for_each_compound_head() does most of
the work.

set_page_dirty() needs no adjustment as it's a nop for non-dirty head
pages and it doesn't operate on tail pages.

This considerably improves unpinning of pages with THP and hugetlbfs:

 - THP

   gup_test -t -m 16384 -r 10 [-L|-a] -S -n 512 -w
   PIN_LONGTERM_BENCHMARK (put values): ~87.6k us -> ~23.2k us

- 16G with 1G huge page size

  gup_test -f /mnt/huge/file -m 16384 -r 10 [-L|-a] -S -n 512 -w
  PIN_LONGTERM_BENCHMARK: (put values): ~87.6k us -> ~27.5k us

Link: https://lkml.kernel.org/r/20210212130843.13865-3-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/gup: add compound page list iterator

Patch series "mm/gup: page unpining improvements", v4.

This series improves page unpinning, with an eye on improving MR
deregistration for big swaths of memory (which is bound by the page
unpining), particularly:

1) Decrement the head page by @ntails and thus reducing a lot the
   number of atomic operations per compound page.  This is done by
   comparing individual tail pages heads, and counting number of
   consecutive tails on which they match heads and based on that update
   head page refcount.  Should have a visible improvement in all page
   (un)pinners which use compound pages

2) Introducing a new API for unpinning page ranges (to avoid the trick
   in the previous item and be based on math), and use that in RDMA
   ib_mem_release (used for mr deregistration).

Performance improvements: unpin_user_pages() for hugetlbfs and THP
improves ~3x (through gup_test) and RDMA MR dereg improves ~4.5x with the
new API.  See patches 2 and 4 for those.

This patch (of 4):

Add a helper that iterates over head pages in a list of pages.  It
essentially counts the tails until the next page to process has a
different head that the current.  This is going to be used by
unpin_user_pages() family of functions, to batch the head page refcount
updates once for all passed consecutive tail pages.

Link: https://lkml.kernel.org/r/20210212130843.13865-1-joao.m.martins@oracle.com
Link: https://lkml.kernel.org/r/20210212130843.13865-2-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/msync: exit early when the flags is an MS_ASYNC and start < vm_start

If an unmapped region was found and the flag is MS_ASYNC (without
MS_INVALIDATE) there is nothing to do and the result would be always
-ENOMEM, so return immediately.

Link: https://lkml.kernel.org/r/20201025092901.56399-1-sh1r4s3@mail.si-head.nl
Signed-off-by: Nikita Ermakov <sh1r4s3@mail.si-head.nl>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/filemap: update stale comment

Commit a6de4b4873e1 ("mm: convert find_get_entry to return the head page")
uses @index instead of @offset, but the comment is stale, update it.

Link: https://lkml.kernel.org/r/1617948260-50724-1-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Rui Sun <sunrui26@huawei.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: move page_mapping_file to pagemap.h

page_mapping_file() is only used by some architectures, and then it
is usually only used in one place.  Make it a static inline function
so other architectures don't have to carry this dead code.

Link: https://lkml.kernel.org/r/20210317123011.350118-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Huang Ying <ying.huang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: page-writeback: simplify memcg handling in test_clear_page_writeback()

Page writeback doesn't hold a page reference, which allows truncate to
free a page the second PageWriteback is cleared.  This used to require
special attention in test_clear_page_writeback(), where we had to be
careful not to rely on the unstable page->memcg binding and look up all
the necessary information before clearing the writeback flag.

Since commit 073861ed77b6 ("mm: fix VM_BUG_ON(PageTail) and
BUG_ON(PageWriteback)") test_clear_page_writeback() is called with an
explicit reference on the page, and this dance is no longer needed.

Use unlock_page_memcg() and dec_lruvec_page_state() directly.

This removes the last user of the lock_page_memcg() return value, change
it to void.  Touch up the comments in there as well.  This also removes
the last extern user of __unlock_page_memcg(), make it static.  Further,
it removes the last user of dec_lruvec_state(), delete it, along with a
few other unused helpers.

Link: https://lkml.kernel.org/r/YCQbYAWg4nvBFL6h@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/filemap: drop check for truncated page after I/O

If the I/O completed successfully, the page will remain Uptodate, even
if it is subsequently truncated.  If the I/O completed with an error,
this check would cause us to retry the I/O if the page were truncated
before we woke up.  There is no need to retry the I/O; the I/O to fill
the page failed, so we can legitimately just return -EIO.

This code was originally added by commit 56f0d5fe6851 ("[PATCH]
readpage-vs-invalidate fix") in 2005 (this commit ID is from the
linux-fullhistory tree; it is also commit ba1f08f14b52 in tglx-history).

At the time, truncate_complete_page() called ClearPageUptodate(), and so
this was fixing a real bug.  In 2008, commit 84209e02de48 ("mm: dont clear
PG_uptodate on truncate/invalidate") removed the call to
ClearPageUptodate, and this check has been unnecessary ever since.

It doesn't do any real harm, but there's no need to keep it.

Link: https://lkml.kernel.org/r/20210303222547.1056428-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/filemap: use filemap_read_page in filemap_fault

After splitting generic_file_buffered_read() into smaller parts, it turns
out we can reuse one of the parts in filemap_fault().  This fixes an
oversight -- waiting for the I/O to complete is now interruptible by a
fatal signal.  And it saves us a few bytes of text in an unlikely path.

  $ ./scripts/bloat-o-meter before.o after.o
  add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-207 (-207)
  Function                                     old     new   delta
  filemap_fault                               2187    1980    -207
  Total: Before=37491, After=37284, chg -0.55%

Link: https://lkml.kernel.org/r/20210226140011.2883498-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

iomap: use filemap_range_needs_writeback() for O_DIRECT reads

For reads, use the better variant of checking for the need to call
filemap_write_and_wait_range() when doing O_DIRECT.  This avoids falling
back to the slow path for IOCB_NOWAIT, if there are no pages to wait for
(or write out).

Link: https://lkml.kernel.org/r/20210224164455.1096727-4-axboe@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: use filemap_range_needs_writeback() for O_DIRECT reads

For the generic page cache read helper, use the better variant of checking
for the need to call filemap_write_and_wait_range() when doing O_DIRECT
reads.  This avoids falling back to the slow path for IOCB_NOWAIT, if
there are no pages to wait for (or write out).

Link: https://lkml.kernel.org/r/20210224164455.1096727-3-axboe@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: provide filemap_range_needs_writeback() helper

Patch series "Improve IOCB_NOWAIT O_DIRECT reads", v3.

An internal workload complained because it was using too much CPU, and
when I took a look, we had a lot of io_uring workers going to town.

For an async buffered read like workload, I am normally expecting _zero_
offloads to a worker thread, but this one had tons of them.  I'd drop
caches and things would look good again, but then a minute later we'd
regress back to using workers.  Turns out that every minute something
was reading parts of the device, which would add page cache for that
inode.  I put patches like these in for our kernel, and the problem was
solved.

Don't -EAGAIN IOCB_NOWAIT dio reads just because we have page cache
entries for the given range.  This causes unnecessary work from the
callers side, when the IO could have been issued totally fine without
blocking on writeback when there is none.

This patch (of 3):

For O_DIRECT reads/writes, we check if we need to issue a call to
filemap_write_and_wait_range() to issue and/or wait for writeback for any
page in the given range.  The existing mechanism just checks for a page in
the range, which is suboptimal for IOCB_NOWAIT as we'll fallback to the
slow path (and needing retry) if there's just a clean page cache page in
the range.

Provide filemap_range_needs_writeback() which tries a little harder to
check if we actually need to issue and/or wait for writeback in the range.

Link: https://lkml.kernel.org/r/20210224164455.1096727-1-axboe@kernel.dk
Link: https://lkml.kernel.org/r/20210224164455.1096727-2-axboe@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memtest: add ARCH_USE_MEMTEST

early_memtest() does not get called from all architectures.  Hence
enabling CONFIG_MEMTEST and providing a valid memtest=[1..N] kernel
command line option might not trigger the memory pattern tests as would be
expected in normal circumstances.  This situation is misleading.

The change here prevents the above mentioned problem after introducing a
new config option ARCH_USE_MEMTEST that should be subscribed on platforms
that call early_memtest(), in order to enable the config CONFIG_MEMTEST.
Conversely CONFIG_MEMTEST cannot be enabled on platforms where it would
not be tested anyway.

Link: https://lkml.kernel.org/r/1617269193-22294-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com> (arm64)
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: page_poison: print page info when corruption is caught

When page_poison detects page corruption it's useful to see who freed a
page recently to have a guess where write-after-free corruption happens.

After this change corruption report has extra page data.
Example report from real corruption (includes only page_pwner part):

    pagealloc: memory corruption
    e00000014cd61d10: 11 00 00 00 00 00 00 00 30 1d d2 ff ff 0f 00 60  ........0......`
    e00000014cd61d20: b0 1d d2 ff ff 0f 00 60 90 fe 1c 00 08 00 00 20  .......`.......
    ...
    CPU: 1 PID: 220402 Comm: cc1plus Not tainted 5.12.0-rc5-00107-g9720c6f59ecf #245
    Hardware name: hp server rx3600, BIOS 04.03 04/08/2008
    ...
    Call Trace:
     [<a000000100015210>] show_stack+0x90/0xc0
     [<a000000101163390>] dump_stack+0x150/0x1c0
     [<a0000001003f1e90>] __kernel_unpoison_pages+0x410/0x440
     [<a0000001003c2460>] get_page_from_freelist+0x1460/0x2ca0
     [<a0000001003c6be0>] __alloc_pages_nodemask+0x3c0/0x660
     [<a0000001003ed690>] alloc_pages_vma+0xb0/0x500
     [<a00000010037deb0>] __handle_mm_fault+0x1230/0x1fe0
     [<a00000010037ef70>] handle_mm_fault+0x310/0x4e0
     [<a00000010005dc70>] ia64_do_page_fault+0x1f0/0xb80
     [<a00000010000ca00>] ia64_leave_kernel+0x0/0x270
    page_owner tracks the page as freed
    page allocated via order 0, migratetype Movable,
      gfp_mask 0x100dca(GFP_HIGHUSER_MOVABLE|__GFP_ZERO), pid 37, ts 8173444098740
     __reset_page_owner+0x40/0x200
     free_pcp_prepare+0x4d0/0x600
     free_unref_page+0x20/0x1c0
     __put_page+0x110/0x1a0
     migrate_pages+0x16d0/0x1dc0
     compact_zone+0xfc0/0x1aa0
     proactive_compact_node+0xd0/0x1e0
     kcompactd+0x550/0x600
     kthread+0x2c0/0x2e0
     call_payload+0x50/0x80

Here we can see that page was freed by page migration but something
managed to write to it afterwards.

[slyfox@gentoo.org: s/dump_page_owner/dump_page/, per Vlastimil]
Link: https://lkml.kernel.org/r/20210407230800.1086854-1-slyfox@gentoo.org
Link: https://lkml.kernel.org/r/20210404141735.2152984-1-slyfox@gentoo.org
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: page_owner: detect page_owner recursion via task_struct

Before the change page_owner recursion was detected via fetching
backtrace and inspecting it for current instruction pointer.
It has a few problems:

 - it is slightly slow as it requires extra backtrace and a linear stack
   scan of the result

 - it is too late to check if backtrace fetching required memory
   allocation itself (ia64's unwinder requires it).

To simplify recursion tracking let's use page_owner recursion flag in
'struct task_struct'.

The change make page_owner=on work on ia64 by avoiding infinite
recursion in:
  kmalloc()
  -> __set_page_owner()
  -> save_stack()
  -> unwind() [ia64-specific]
  -> build_script()
  -> kmalloc()
  -> __set_page_owner() [we short-circuit here]
  -> save_stack()
  -> unwind() [recursion]

Link: https://lkml.kernel.org/r/20210402115342.1463781-1-slyfox@gentoo.org
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: page_owner: use kstrtobool() to parse bool option

I tried to use page_owner=1 for a while noticed too late it had no effect
as opposed to similar init_on_alloc=1 (these work).

Let's make them consistent.

The change decreses binary size slightly:
   text    data     bss     dec     hex filename
  12408     321      17   12746    31ca mm/page_owner.o.before
  12320     321      17   12658    3172 mm/page_owner.o.after

Link: https://lkml.kernel.org/r/20210401210909.3532086-1-slyfox@gentoo.org
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: page_owner: fetch backtrace only for tracked pages

Very minor optimization.

Link: https://lkml.kernel.org/r/20210401212445.3534721-1-slyfox@gentoo.org
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, page_owner: remove unused parameter in __set_page_owner_handle

Since commit 5556cfe8d994 ("mm, page_owner: fix off-by-one error in
__set_page_owner_handle()") introduced, the parameter 'page' will not
used, hence it need to be removed.

Link: https://lkml.kernel.org/r/1616602022-43545-1-git-send-email-zhongjiang-ali@linux.alibaba.com
Signed-off-by: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/page_owner: record the timestamp of all pages during free

Collect the time when each allocation is freed, to help with memory
analysis with kdump/ramdump.  Add the timestamp also in the page_owner
debugfs file and print it in dump_page().

Having another timestamp when we free the page helps for debugging page
migration issues.  For example both alloc and free timestamps being the
same can gave hints that there is an issue with migrating memory, as
opposed to a page just being dropped during migration.

Link: https://lkml.kernel.org/r/20210203175905.12267-1-georgi.djakov@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/kmemleak.c: fix a typo

s/interruptable/interruptible/

Link: https://lkml.kernel.org/r/20210319214140.23304-1-unixbhaskar@gmail.com
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/slub.c: trivial typo fixes

s/operatios/operations/
s/Mininum/Minimum/
s/mininum/minimum/  ......two different places.

Link: https://lkml.kernel.org/r/20210325044940.14516-1-unixbhaskar@gmail.com
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, slub: enable slub_debug static key when creating cache with explicit debug flags

Commit ca0cab65ea2b ("mm, slub: introduce static key for slub_debug()")
introduced a static key to optimize the case where no debugging is
enabled for any cache.  The static key is enabled when slub_debug boot
parameter is passed, or CONFIG_SLUB_DEBUG_ON enabled.

However, some caches might be created with one or more debugging flags
explicitly passed to kmem_cache_create(), and the commit missed this.
Thus the debugging functionality would not be actually performed for
these caches unless the static key gets enabled by boot param or config.

This patch fixes it by checking for debugging flags passed to
kmem_cache_create() and enabling the static key accordingly.

Note such explicit debugging flags should not be used outside of
debugging and testing as they will now enable the static key globally.
btrfs_init_cachep() creates a cache with SLAB_RED_ZONE but that's a
mistake that's being corrected [1].  rcu_torture_stats() creates a cache
with SLAB_STORE_USER, but that is a testing module so it's OK and will
start working as intended after this patch.

Also note that in case of backports to kernels before v5.12 that don't
have 59450bbc12be ("mm, slab, slub: stop taking cpu hotplug lock"),
static_branch_enable_cpuslocked() should be used.

[1] https://lore.kernel.org/linux-btrfs/20210315141824.26099-1-dsterba@suse.com/

Link: https://lkml.kernel.org/r/20210315153415.24404-1-vbabka@suse.cz
Fixes: ca0cab65ea2b ("mm, slub: introduce static key for slub_debug()")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Oliver Glitta <glittao@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/slab_common: provide "slab_merge" option for !IS_ENABLED(CONFIG_SLAB_MERGE_DEFAULT) builds

This is a minor addition to the allocator setup options to provide a
simple way to on demand enable back cache merging for builds that by
default run with CONFIG_SLAB_MERGE_DEFAULT not set.

Link: https://lkml.kernel.org/r/20210319194506.200159-1-aquini@redhat.com
Signed-off-by: Rafael Aquini <aquini@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

watchdog: cleanup handling of false positives

Commit d6ad3e286d2c ("softlockup: Add sched_clock_tick() to avoid kernel
warning on kgdb resume") introduced touch_softlockup_watchdog_sync().

It solved a problem when the watchdog was touched in an atomic context,
the timer callback was proceed right after releasing interrupts, and the
local clock has not been updated yet.  In this case, sched_clock_tick()
was called in watchdog_timer_fn() before updating the timer.

So far so good.

Later commit 5d1c0f4a80a6 ("watchdog: add check for suspended vm in
softlockup detector") added two kvm_check_and_clear_guest_paused()
calls.  They touch the watchdog when the guest has been sleeping.

The code makes my head spin around.

Scenario 1:

    + guest did sleep:
+ PVCLOCK_GUEST_STOPPED is set

    + 1st watchdog_timer_fn() invocation:
+ the watchdog is not touched yet
+ is_softlockup() returns too big delay
+ kvm_check_and_clear_guest_paused():
   + clear PVCLOCK_GUEST_STOPPED
   + call touch_softlockup_watchdog_sync()
+ set SOFTLOCKUP_DELAY_REPORT
+ set softlockup_touch_sync
+ return from the timer callback

      + 2nd watchdog_timer_fn() invocation:

+ call sched_clock_tick() even though it is not needed.
  The timer callback was invoked again only because the clock
  has already been updated in the meantime.

+ call kvm_check_and_clear_guest_paused() that does nothing
  because PVCLOCK_GUEST_STOPPED has been cleared already.

+ call update_report_ts() and return. This is fine. Except
  that sched_clock_tick() might allow to set it already
  during the 1st invocation.

Scenario 2:

+ guest did sleep

+ 1st watchdog_timer_fn() invocation
    + same as in 1st scenario

+ guest did sleep again:
    + set PVCLOCK_GUEST_STOPPED again

+ 2nd watchdog_timer_fn() invocation
    + SOFTLOCKUP_DELAY_REPORT is set from 1st invocation
    + call sched_clock_tick()
    + call kvm_check_and_clear_guest_paused()
+ clear PVCLOCK_GUEST_STOPPED
+ call touch_softlockup_watchdog_sync()
    + set SOFTLOCKUP_DELAY_REPORT
    + set softlockup_touch_sync
    + call update_report_ts() (set real timestamp immediately)
    + return from the timer callback

+ 3rd watchdog_timer_fn() invocation
    + timestamp is set from 2nd invocation
    + softlockup_touch_sync is set but not checked because
      the real timestamp is already set

Make the code more straightforward:

1. Always call kvm_check_and_clear_guest_paused() at the very
   beginning to handle PVCLOCK_GUEST_STOPPED. It touches the watchdog
   when the quest did sleep.

2. Handle the situation when the watchdog has been touched
   (SOFTLOCKUP_DELAY_REPORT is set).

   Call sched_clock_tick() when touch_*sync() variant was used. It makes
   sure that the timestamp will be up to date even when it has been
   touched in atomic context or quest did sleep.

As a result, kvm_check_and_clear_guest_paused() is called on a single
location.  And the right timestamp is always set when returning from the
timer callback.

Link: https://lkml.kernel.org/r/20210311122130.6788-7-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

watchdog: fix barriers when printing backtraces from all CPUs

Any parallel softlockup reports are skipped when one CPU is already
printing backtraces from all CPUs.

The exclusive rights are synchronized using one bit in
soft_lockup_nmi_warn.  There is also one memory barrier that does not make
much sense.

Use two barriers on the right location to prevent mixing two reports.

[pmladek@suse.com: use bit lock operations to prevent multiple soft-lockup reports]
Link: https://lkml.kernel.org/r/YFSVsLGVWMXTvlbk@alley
Link: https://lkml.kernel.org/r/20210311122130.6788-6-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

watchdog/softlockup: remove logic that tried to prevent repeated reports

The softlockup detector does some gymnastic with the variable
soft_watchdog_warn.  It was added by the commit 58687acba59266735ad
("lockup_detector: Combine nmi_watchdog and softlockup detector").

The purpose is not completely clear.  There are the following clues.  They
describe the situation how it looked after the above mentioned commit:

  1. The variable was checked with a comment "only warn once".

  2. The variable was set when softlockup was reported. It was cleared
     only when the CPU was not longer in the softlockup state.

  3. watchdog_touch_ts was not explicitly updated when the softlockup
     was reported. Without this variable, the report would normally
     be printed again during every following watchdog_timer_fn()
     invocation.

The logic has got even more tangled up by the commit ed235875e2ca98
("kernel/watchdog.c: print traces for all cpus on lockup detection").
After this commit, soft_watchdog_warn is set only when
softlockup_all_cpu_backtrace is enabled.  But multiple reports from all
CPUs are prevented by a new variable soft_lockup_nmi_warn.

Conclusion:

The variable probably never worked as intended.  In each case, it has not
worked last many years because the softlockup was reported repeatedly
after the full period defined by watchdog_thresh.

The reason is that watchdog gets touched in many known slow paths, for
example, in printk_stack_address().  This code is called also when
printing the softlockup report.  It means that the watchdog timestamp gets
updated after each report.

Solution:

Simply remove the logic. People want the periodic report anyway.

Link: https://lkml.kernel.org/r/20210311122130.6788-5-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

watchdog/softlockup: report the overall time of softlockups

The softlockup detector currently shows the time spent since the last
report.  As a result it is not clear whether a CPU is infinitely hogged by
a single task or if it is a repeated event.

The situation can be simulated with a simply busy loop:

while (true)
      cpu_relax();

The softlockup detector produces:

[  168.277520] watchdog: BUG: soft lockup - CPU#1 stuck for 22s! [cat:4865]
[  196.277604] watchdog: BUG: soft lockup - CPU#1 stuck for 22s! [cat:4865]
[  236.277522] watchdog: BUG: soft lockup - CPU#1 stuck for 23s! [cat:4865]

But it should be, something like:

[  480.372418] watchdog: BUG: soft lockup - CPU#2 stuck for 26s! [cat:4943]
[  508.372359] watchdog: BUG: soft lockup - CPU#2 stuck for 52s! [cat:4943]
[  548.372359] watchdog: BUG: soft lockup - CPU#2 stuck for 89s! [cat:4943]
[  576.372351] watchdog: BUG: soft lockup - CPU#2 stuck for 115s! [cat:4943]

For the better output, add an additional timestamp of the last report.
Only this timestamp is reset when the watchdog is intentionally touched
from slow code paths or when printing the report.

Link: https://lkml.kernel.org/r/20210311122130.6788-4-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

watchdog: explicitly update timestamp when reporting softlockup

The softlockup situation might stay for a long time or even forever.  When
it happens, the softlockup debug messages are printed in regular intervals
defined by get_softlockup_thresh().

There is a mystery.  The repeated message is printed after the full
interval that is defined by get_softlockup_thresh().  But the timer
callback is called more often as defined by sample_period.  The code looks
like the soflockup should get reported in every sample_period when it was
once behind the thresh.

It works only by chance.  The watchdog is touched when printing the stall
report, for example, in printk_stack_address().

Make the behavior clear and predictable by explicitly updating the
timestamp in watchdog_timer_fn() when the report gets printed.

Link: https://lkml.kernel.org/r/20210311122130.6788-3-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

watchdog: rename __touch_watchdog() to a better descriptive name

Patch series "watchdog/softlockup: Report overall time and some cleanup", v2.

I dug deep into the softlockup watchdog history when time permitted this
year.  And reworked the patchset that fixed timestamps and cleaned up the
code[2].

I split it into very small steps and did even more code clean up.  The
result looks quite strightforward and I am pretty confident with the
changes.

[1] v2: https://lore.kernel.org/r/20201210160038.31441-1-pmladek@suse.com
[2] v1: https://lore.kernel.org/r/20191024114928.15377-1-pmladek@suse.com

This patch (of 6):

There are many touch_*watchdog() functions.  They are called in situations
where the watchdog could report false positives or create unnecessary
noise.  For example, when CPU is entering idle mode, a virtual machine is
stopped, or a lot of messages are printed in the atomic context.

These functions set SOFTLOCKUP_RESET instead of a real timestamp.  It
allows to call them even in a context where jiffies might be outdated.
For example, in an atomic context.

The real timestamp is set by __touch_watchdog() that is called from the
watchdog timer callback.

Rename this callback to update_touch_ts().  It better describes the effect
and clearly distinguish is from the other touch_*watchdog() functions.

Another motivation is that two timestamps are going to be used.  One will
be used for the total softlockup time.  The other will be used to measure
time since the last report.  The new function name will help to
distinguish which timestamp is being updated.

Link: https://lkml.kernel.org/r/20210311122130.6788-1-pmladek@suse.com
Link: https://lkml.kernel.org/r/20210311122130.6788-2-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vfs: fs_parser: clean up kernel-doc warnings

Fix kernel-doc notation function arguments to eliminate two kernel-doc
warnings:

  fs_parser.c:322: warning: Excess function parameter 'name' description in 'validate_constant_table'
  fs_parser.c:367: warning: Function parameter or member 'name' not described in 'fs_validate_description'

Link: https://lkml.kernel.org/r/20210407033743.9701-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kfifo: fix ternary sign extension bugs

The intent with this code was to return negative error codes but instead
it returns positives.

The problem is how type promotion works with ternary operations.  These
functions return long, "ret" is an int and "copied" is a u32.  The
negative error code is first cast to u32 so it becomes a high positive and
then cast to long where it's still a positive.

We could fix this by declaring "ret" as a ssize_t but let's just get rid
of the ternaries instead.

Link: https://lkml.kernel.org/r/YIE+/cK1tBzSuQPU@mwanda
Fixes: 5bf2b19320ec ("kfifo: add example files to the kernel sample directory")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Stefani Seibold <stefani@seibold.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2/dlm: remove unused function

Fix the following clang warning:

  fs/ocfs2/dlm/dlmrecovery.c:129:20: warning: unused function 'dlm_reset_recovery' [-Wunused-function].

Link: https://lkml.kernel.org/r/1618382761-5784-1-git-send-email-jiapeng.chong@linux.alibaba.com
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Wengang Wang <wen.gang.wang@oracle.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: fix a typo

s/cluter/cluster/

Link: https://lkml.kernel.org/r/20210324072931.5056-1-unixbhaskar@gmail.com
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: map flags directly in flags_to_o2dlm()

Use macro map_flag() is tricky and coccicheck outputs the following
warning:

  fs/ocfs2/stack_o2cb.c:69:5-16: Unneeded variable: "o2dlm_flags"

So map flags directly in flags_to_o2dlm() to make coccicheck happy.
And remove BUG_ON() here as well to simplify code since it runs well
a long time.

Link: https://lkml.kernel.org/r/1616138664-35935-1-git-send-email-joseph.qi@linux.alibaba.com
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Wengang Wang <wen.gang.wang@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE

Fix the following coccicheck warning:

  fs/ocfs2/blockcheck.c:232:0-23: WARNING: blockcheck_fops should be defined with DEFINE_DEBUGFS_ATTRIBUTE

Link: https://lkml.kernel.org/r/1614155230-57292-1-git-send-email-yang.lee@linux.alibaba.com
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arch/sh/include/asm/tlb.h: remove duplicate include

'asm-generic/tlb.h' included in 'asm/tlb.h' is duplicated.

Link: https://lkml.kernel.org/r/20210304132020.196811-1-zhang.yunkai@zte.com.cn
Signed-off-by: Zhang Yunkai <zhang.yunkai@zte.com.cn>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Cc: Rich Felker <dalias@libc.org>
Cc: Zhang Yunkai <zhang.yunkai@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

scripts: a new script for checking duplicate struct declaration

checkdeclares: find struct declared more than once.  Inspired by
checkincludes.pl.

This script checks for duplicate struct declares.  Note that this will not
take into consideration macros, so you should run this only if you know
you do have real dups and do not have them under #ifdef's.  You could also
just review the results.

[akpm@linux-foundation.org: fix usage message, grammar]

Link: https://lkml.kernel.org/r/20210401110943.1010796-1-wanjiabing@vivo.com
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

scripts/spelling.txt: add entries for recent discoveries

Add a few entries for recent spelling fixes found.

Opportunistically de-dupe:
exeeds||exceeds

Link: https://lore.kernel.org/lkml/31acb3239b7ab8989db0c9951e8740050aef0205.1616727528.git.tom.saeger@oracle.com/
Link: https://lore.kernel.org/lkml/fa193b3c9e346ff3fc157b54802c29b25f79c402.1615597995.git.tom.saeger@oracle.com/
Link: https://lkml.kernel.org/r/4a594a9e1536b1d9e5ba57f684c1e41457dd383b.1616861645.git.tom.saeger@oracle.com
Signed-off-by: Tom Saeger <tom.saeger@oracle.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/linux/compiler-gcc.h: sparse can do constant folding of __builtin_bswap*()

Sparse can do constant folding of __builtin_bswap*() since 2017.  Also, a
much recent version of Sparse is needed anyway, see commit 6ec4476ac825
("Raise gcc version requirement to 4.9").

So, remove the comment about sparse not being yet able to constant fold
__builtin_bswap*() and remove the corresponding test of __CHECKER__.

Link: https://lkml.kernel.org/r/20210226092236.99369-1-luc.vanoostenryck@gmail.com
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ia64: module: fix symbolizer crash on fdescr

Noticed failure as a crash on ia64 when tried to symbolize all backtraces
collected by page_owner=on:

    $ cat /sys/kernel/debug/page_owner
    <oops>

    CPU: 1 PID: 2074 Comm: cat Not tainted 5.12.0-rc4 #226
    Hardware name: hp server rx3600, BIOS 04.03 04/08/2008
    ip is at dereference_module_function_descriptor+0x41/0x100

Crash happens at dereference_module_function_descriptor() due to
use-after-free when dereferencing ".opd" section header.

All section headers are already freed after module is laoded successfully.

To keep symbolizer working the change stores ".opd" address and size after
module is relocated to a new place and before section headers are
discarded.

To make similar errors less obscure module_finalize() now zeroes out all
variables relevant to module loading only.

Link: https://lkml.kernel.org/r/20210403074803.3309096-1-slyfox@gentoo.org
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ia64: drop marked broken DISCONTIGMEM and VIRTUAL_MEM_MAP

DISCONTIGMEM was marked BROKEN in 5.11. Let's remove it.

Booted SPARSEMEM successfully on rx3600.

Link: https://lkml.kernel.org/r/20210404193440.2615358-1-slyfox@gentoo.org
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ia64: mca: always make IA64_MCA_DEBUG an expression

At least ia64_mca_log_sal_error_record() expects some statement:

    static void ia64_mca_log_sal_error_record(int sal_info_type)
    {
        ...
        if (irq_safe)
            IA64_MCA_DEBUG("CPU %d: SAL log contains %s error record
",
                smp_processor_id(),
                sal_info_type < ARRAY_SIZE(rec_name) ? rec_name[sal_info_type] : "UNKNOWN");
        ...
    }

Instead of fixing all callers the change expicitly makes IA64_MCA_DEBUG
a non-empty expression.

Link: https://lkml.kernel.org/r/20210328215549.830420-1-slyfox@gentoo.org
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ia64: fix EFI_DEBUG build

When enabled local debugging via `#define EFI_DEBUG 1` noticed build
failure:

    arch/ia64/kernel/efi.c:564:8: error: 'i' undeclared (first use in this function)

While at it fixed benign string format mismatches visible only when
EFI_DEBUG is enabled:

    arch/ia64/kernel/efi.c:589:11:
        warning: format '%lx' expects argument of type 'long unsigned int',
        but argument 5 has type 'u64' {aka 'long long unsigned int'} [-Wformat=]

Link: https://lkml.kernel.org/r/20210328212246.685601-1-slyfox@gentoo.org
Fixes: 14fb42090943559 ("efi: Merge EFI system table revision and vendor checks")
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ia64: trivial spelling fixes

s/seralize/serialize/ .....three different places

Link: https://lkml.kernel.org/r/YFY+9uwvNLeb/3Ab@Gentoo
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ia64: simplify code flow around swiotlb init

Before the change CONFIG_INTEL_IOMMU && !CONFIG_SWIOTLB && !CONFIG_FLATMEM
could skip `set_max_mapnr(max_low_pfn);` if iommu is not present on
system.

Link: https://lkml.kernel.org/r/20210328202439.403601-1-slyfox@gentoo.org
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ia64: drop unused IA64_FW_EMU ifdef

It's a remnant of deleted hpsim emulation target removed in fc5bad037
("ia64: remove the hpsim platform").

Link: https://lkml.kernel.org/r/20210323224009.240625-1-slyfox@gentoo.org
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ia64: ensure proper NUMA distance and possible map initialization

John Paul reported a warning about bogus NUMA distance values spurred by
commit:

  620a6dc40754 ("sched/topology: Make sched_init_numa() use a set for the deduplicating sort")

In this case, the afflicted machine comes up with a reported 256 possible
nodes, all of which are 0 distance away from one another.  This was
previously silently ignored, but is now caught by the aforementioned
commit.

The culprit is ia64's node_possible_map which remains unchanged from its
initialization value of NODE_MASK_ALL.  In John's case, the machine
doesn't have any SRAT nor SLIT table, but AIUI the possible map remains
untouched regardless of what ACPI tables end up being parsed.  Thus,
!online && possible nodes remain with a bogus distance of 0 (distances \in
[0, 9] are "reserved and have no meaning" as per the ACPI spec).

Follow x86 / drivers/base/arch_numa's example and set the possible map to
the parsed map, which in this case seems to be the online map.

Link: http://lore.kernel.org/r/255d6b5d-194e-eb0e-ecdd-97477a534441@physik.fu-berlin.de
Link: https://lkml.kernel.org/r/20210318130617.896309-1-valentin.schneider@arm.com
Fixes: 620a6dc40754 ("sched/topology: Make sched_init_numa() use a set for the deduplicating sort")
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Tested-by: Sergei Trofimovich <slyfox@gentoo.org>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Anatoly Pugachev <matorola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arch/ia64/include/asm/pgtable.h: minor typo fixes

s/migraton/migration/

Link: https://lkml.kernel.org/r/20210313045519.9310-1-unixbhaskar@gmail.com
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arch/ia64/kernel/fsys.S: fix typos

Mundane spelling fixes.

Link: https://lkml.kernel.org/r/20210311061058.29492-1-unixbhaskar@gmail.com
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arch/ia64/kernel/head.S: remove duplicate include

'linux/pgtable.h' included in 'arch/ia64/kernel/head.S' is duplicated.

Link: https://lkml.kernel.org/r/20210303084549.179346-1-zhang.yunkai@zte.com.cn
Signed-off-by: Zhang Yunkai <zhang.yunkai@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'kconfig-v5.13' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull Kconfig updates from Masahiro Yamada:

 - Change 'option defconfig' to the environment variable
   KCONFIG_DEFCONFIG_LIST

 - Refactor tinyconfig without using allnoconfig_y

 - Remove 'option allnoconfig_y' syntax

 - Change 'option modules' to 'modules'

 - Do not use /boot/config-* etc. as base config for cross-compilation

 - Fix a search bug in nconf

 - Various code cleanups

* tag 'kconfig-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
  kconfig: refactor .gitignore
  kconfig: highlight xconfig 'comment' lines with '***'
  kconfig: highlight gconfig 'comment' lines with '***'
  kconfig: gconf: remove unused code
  kconfig: remove unused PACKAGE definition
  kconfig: nconf: stop endless search loops
  kconfig: split menu.c out of parser.y
  kconfig: nconf: refactor in print_in_middle()
  kconfig: nconf: remove meaningless wattrset() call from show_menu()
  kconfig: nconf: change set_config_filename() to void function
  kconfig: nconf: refactor attributes setup code
  kconfig: nconf: remove unneeded default for menu prompt
  kconfig: nconf: get rid of (void) casts from wattrset() calls
  kconfig: nconf: fix NORMAL attributes
  kconfig: mconf,nconf: remove unneeded '\0' termination after snprintf()
  kconfig: use /boot/config-* etc. as DEFCONFIG_LIST only for native build
  kconfig: change sym_change_count to a boolean flag
  kconfig: nconf: fix core dump when searching in empty menu
  kconfig: lxdialog: A spello fix and a punctuation added
  kconfig: streamline_config.pl: Couple of typo fixes
  ...

Merge tag 'kbuild-v5.13' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

 - Evaluate $(call cc-option,...) etc. only for build targets

 - Add CONFIG_VMLINUX_MAP to generate .map file when linking vmlinux

 - Remove unnecessary --gcc-toolchains Clang flag because the --prefix
   flag finds the toolchains

 - Do not pass Clang's --prefix flag when using the integrated as

 - Check the assembler version in Kconfig time

 - Add new CONFIG options, AS_VERSION, AS_IS_GNU, AS_IS_LLVM to clean up
   some dependencies in Kconfig

 - Fix invalid Module.symvers creation when building only modules
   without vmlinux

 - Fix false-positive modpost warnings when CONFIG_TRIM_UNUSED_KSYMS is
   set, but there is no module to build

 - Refactor module installation Makefile

 - Support zstd for module compression

 - Convert alpha and ia64 to use generic shell scripts to generate the
   syscall headers

 - Add a new elfnote to indicate if the kernel was built with LTO, which
   will be used by pahole

 - Flatten the directory structure under include/config/ so CONFIG
   options and filenames match

 - Change the deb source package name from linux-$(KERNELRELEASE) to
   linux-upstream

* tag 'kbuild-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (42 commits)
  kbuild: Add $(KBUILD_HOSTLDFLAGS) to 'has_libelf' test
  kbuild: deb-pkg: change the source package name to linux-upstream
  tools: do not include scripts/Kbuild.include
  kbuild: redo fake deps at include/config/*.h
  kbuild: remove TMPO from try-run
  MAINTAINERS: add pattern for dummy-tools
  kbuild: add an elfnote for whether vmlinux is built with lto
  ia64: syscalls: switch to generic syscallhdr.sh
  ia64: syscalls: switch to generic syscalltbl.sh
  alpha: syscalls: switch to generic syscallhdr.sh
  alpha: syscalls: switch to generic syscalltbl.sh
  sysctl: use min() helper for namecmp()
  kbuild: add support for zstd compressed modules
  kbuild: remove CONFIG_MODULE_COMPRESS
  kbuild: merge scripts/Makefile.modsign to scripts/Makefile.modinst
  kbuild: move module strip/compression code into scripts/Makefile.modinst
  kbuild: refactor scripts/Makefile.modinst
  kbuild: rename extmod-prefix to extmod_prefix
  kbuild: check module name conflict for external modules as well
  kbuild: show the target directory for depmod log
  ...

Merge tag 'net-next-5.13' of git://git./linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - bpf:
        - allow bpf programs calling kernel functions (initially to
          reuse TCP congestion control implementations)
        - enable task local storage for tracing programs - remove the
          need to store per-task state in hash maps, and allow tracing
          programs access to task local storage previously added for
          BPF_LSM
        - add bpf_for_each_map_elem() helper, allowing programs to walk
          all map elements in a more robust and easier to verify fashion
        - sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
          redirection
        - lpm: add support for batched ops in LPM trie
        - add BTF_KIND_FLOAT support - mostly to allow use of BTF on
          s390 which has floats in its headers files
        - improve BPF syscall documentation and extend the use of kdoc
          parsing scripts we already employ for bpf-helpers
        - libbpf, bpftool: support static linking of BPF ELF files
        - improve support for encapsulation of L2 packets

   - xdp: restructure redirect actions to avoid a runtime lookup,
     improving performance by 4-8% in microbenchmarks

   - xsk: build skb by page (aka generic zerocopy xmit) - improve
     performance of software AF_XDP path by 33% for devices which don't
     need headers in the linear skb part (e.g. virtio)

   - nexthop: resilient next-hop groups - improve path stability on
     next-hops group changes (incl. offload for mlxsw)

   - ipv6: segment routing: add support for IPv4 decapsulation

   - icmp: add support for RFC 8335 extended PROBE messages

   - inet: use bigger hash table for IP ID generation

   - tcp: deal better with delayed TX completions - make sure we don't
     give up on fast TCP retransmissions only because driver is slow in
     reporting that it completed transmitting the original

   - tcp: reorder tcp_congestion_ops for better cache locality

   - mptcp:
        - add sockopt support for common TCP options
        - add support for common TCP msg flags
        - include multiple address ids in RM_ADDR
        - add reset option support for resetting one subflow

   - udp: GRO L4 improvements - improve 'forward' / 'frag_list'
     co-existence with UDP tunnel GRO, allowing the first to take place
     correctly even for encapsulated UDP traffic

   - micro-optimize dev_gro_receive() and flow dissection, avoid
     retpoline overhead on VLAN and TEB GRO

   - use less memory for sysctls, add a new sysctl type, to allow using
     u8 instead of "int" and "long" and shrink networking sysctls

   - veth: allow GRO without XDP - this allows aggregating UDP packets
     before handing them off to routing, bridge, OvS, etc.

   - allow specifing ifindex when device is moved to another namespace

   - netfilter:
        - nft_socket: add support for cgroupsv2
        - nftables: add catch-all set element - special element used to
          define a default action in case normal lookup missed
        - use net_generic infra in many modules to avoid allocating
          per-ns memory unnecessarily

   - xps: improve the xps handling to avoid potential out-of-bound
     accesses and use-after-free when XPS change race with other
     re-configuration under traffic

   - add a config knob to turn off per-cpu netdev refcnt to catch
     underflows in testing

  Device APIs:

   - add WWAN subsystem to organize the WWAN interfaces better and
     hopefully start driving towards more unified and vendor-
     independent APIs

   - ethtool:
        - add interface for reading IEEE MIB stats (incl. mlx5 and bnxt
          support)
        - allow network drivers to dump arbitrary SFP EEPROM data,
          current offset+length API was a poor fit for modern SFP which
          define EEPROM in terms of pages (incl. mlx5 support)

   - act_police, flow_offload: add support for packet-per-second
     policing (incl. offload for nfp)

   - psample: add additional metadata attributes like transit delay for
     packets sampled from switch HW (and corresponding egress and
     policy-based sampling in the mlxsw driver)

   - dsa: improve support for sandwiched LAGs with bridge and DSA

   - netfilter:
        - flowtable: use direct xmit in topologies with IP forwarding,
          bridging, vlans etc.
        - nftables: counter hardware offload support

   - Bluetooth:
        - improvements for firmware download w/ Intel devices
        - add support for reading AOSP vendor capabilities
        - add support for virtio transport driver

   - mac80211:
        - allow concurrent monitor iface and ethernet rx decap
        - set priority and queue mapping for injected frames

   - phy: add support for Clause-45 PHY Loopback

   - pci/iov: add sysfs MSI-X vector assignment interface to distribute
     MSI-X resources to VFs (incl. mlx5 support)

  New hardware/drivers:

   - dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port
     Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit
     interfaces.

   - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and
     BCM63xx switches

   - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches

   - ath11k: support for QCN9074 a 802.11ax device

   - Bluetooth: Broadcom BCM4330 and BMC4334

   - phy: Marvell 88X2222 transceiver support

   - mdio: add BCM6368 MDIO mux bus controller

   - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips

   - mana: driver for Microsoft Azure Network Adapter (MANA)

   - Actions Semi Owl Ethernet MAC

   - can: driver for ETAS ES58X CAN/USB interfaces

  Pure driver changes:

   - add XDP support to: enetc, igc, stmmac

   - add AF_XDP support to: stmmac

   - virtio:
        - page_to_skb() use build_skb when there's sufficient tailroom
          (21% improvement for 1000B UDP frames)
        - support XDP even without dedicated Tx queues - share the Tx
          queues with the stack when necessary

   - mlx5:
        - flow rules: add support for mirroring with conntrack, matching
          on ICMP, GTP, flex filters and more
        - support packet sampling with flow offloads
        - persist uplink representor netdev across eswitch mode changes
        - allow coexistence of CQE compression and HW time-stamping
        - add ethtool extended link error state reporting

   - ice, iavf: support flow filters, UDP Segmentation Offload

   - dpaa2-switch:
        - move the driver out of staging
        - add spanning tree (STP) support
        - add rx copybreak support
        - add tc flower hardware offload on ingress traffic

   - ionic:
        - implement Rx page reuse
        - support HW PTP time-stamping

   - octeon: support TC hardware offloads - flower matching on ingress
     and egress ratelimitting.

   - stmmac:
        - add RX frame steering based on VLAN priority in tc flower
        - support frame preemption (FPE)
        - intel: add cross time-stamping freq difference adjustment

   - ocelot:
        - support forwarding of MRP frames in HW
        - support multiple bridges
        - support PTP Sync one-step timestamping

   - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
     learning, flooding etc.

   - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
     SC7280 SoCs)

   - mt7601u: enable TDLS support

   - mt76:
        - add support for 802.3 rx frames (mt7915/mt7615)
        - mt7915 flash pre-calibration support
        - mt7921/mt7663 runtime power management fixes"

* tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits)
  net: selftest: fix build issue if INET is disabled
  net: netrom: nr_in: Remove redundant assignment to ns
  net: tun: Remove redundant assignment to ret
  net: phy: marvell: add downshift support for M88E1240
  net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255
  net/sched: act_ct: Remove redundant ct get and check
  icmp: standardize naming of RFC 8335 PROBE constants
  bpf, selftests: Update array map tests for per-cpu batched ops
  bpf: Add batched ops support for percpu array
  bpf: Implement formatted output helpers with bstr_printf
  seq_file: Add a seq_bprintf function
  sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues
  net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
  net: fix a concurrency bug in l2tp_tunnel_register()
  net/smc: Remove redundant assignment to rc
  mpls: Remove redundant assignment to err
  llc2: Remove redundant assignment to rc
  net/tls: Remove redundant initialization of record
  rds: Remove redundant assignment to nr_sig
  dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0
  ...

Merge tag 'x86-mm-2021-04-29' of git://git./linux/kernel/git/tip/tip

Pull x86 tlb updates from Ingo Molnar:
 "The x86 MM changes in this cycle were:

   - Implement concurrent TLB flushes, which overlaps the local TLB
     flush with the remote TLB flush.

     In testing this improved sysbench performance measurably by a
     couple of percentage points, especially if TLB-heavy security
     mitigations are active.

   - Further micro-optimizations to improve the performance of TLB
     flushes"

* tag 'x86-mm-2021-04-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  smp: Micro-optimize smp_call_function_many_cond()
  smp: Inline on_each_cpu_cond() and on_each_cpu()
  x86/mm/tlb: Remove unnecessary uses of the inline keyword
  cpumask: Mark functions as pure
  x86/mm/tlb: Do not make is_lazy dirty for no reason
  x86/mm/tlb: Privatize cpu_tlbstate
  x86/mm/tlb: Flush remote and local TLBs concurrently
  x86/mm/tlb: Open-code on_each_cpu_cond_mask() for tlb_is_not_lazy()
  x86/mm/tlb: Unify flush_tlb_func_local() and flush_tlb_func_remote()
  smp: Run functions concurrently in smp_call_function_many_cond()

Merge tag 'microblaze-v5.13' of git://git.monstr.eu/linux-2.6-microblaze

Pull Microblaze updates from Michal Simek:
 "No new features, just about cleaning up some code and moving to
  generic syscall solution used by other architectures:

   - Switch to generic syscall scripts

   - Some small fixes"

* tag 'microblaze-v5.13' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: add 'fallthrough' to memcpy/memset/memmove
  microblaze: Fix a typo
  microblaze: tag highmem_setup() with __meminit
  microblaze: syscalls: switch to generic syscallhdr.sh
  microblaze: syscalls: switch to generic syscalltbl.sh