review.tizen.org Git - platform/kernel/linux-exynos.git/log

IB/core: Make testing MR flags for writability a static inline function

commit 08bb558ac11ab944e0539e78619d7b4c356278bd upstream.

Make the MR writability flags check, which is performed in umem.c,
a static inline function in file ib_verbs.h

This allows the function to be used by low-level infiniband drivers.

Cc: <stable@vger.kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/mlx4: Mark user MR as writable if actual virtual memory is writable

commit d8f9cc328c8888369880e2527e9186d745f2bbf6 upstream.

To allow rereg_user_mr to modify the MR from read-only to writable without
using get_user_pages again, we needed to define the initial MR as writable.
However, this was originally done unconditionally, without taking into
account the writability of the underlying virtual memory.

As a result, any attempt to register a read-only MR over read-only
virtual memory failed.

To fix this, do not add the writable flag bit when the user virtual memory
is not writable (e.g. const memory).

However, when the underlying memory is NOT writable (and we therefore
do not define the initial MR as writable), the IB core adds a
"force writable" flag to its user-pages request. If this succeeds,
the reg_user_mr caller gets a writable copy of the original pages.

If the user-space caller then does a rereg_user_mr operation to enable
writability, this will succeed. This should not be allowed, since
the original virtual memory was not writable.

Cc: <stable@vger.kernel.org>
Fixes: 9376932d0c26 ("IB/mlx4_ib: Add support for user MR re-registration")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/{hfi1, qib}: Add handling of kernel restart

commit 8d3e71136a080d007620472f50c7b3e63ba0f5cf upstream.

A warm restart will fail to unload the driver, leaving link state
potentially flapping up to the point the BIOS resets the adapter.
Correct the issue by hooking the shutdown pci method,
which will bring port down.

Cc: <stable@vger.kernel.org> # 4.9.x
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/qib: Fix DMA api warning with debug kernel

commit 0252f73334f9ef68868e4684200bea3565a4fcee upstream.

The following error occurs in a debug build when running MPI PSM:

[  307.415911] WARNING: CPU: 4 PID: 23867 at lib/dma-debug.c:1158
check_unmap+0x4ee/0xa20
[  307.455661] ib_qib 0000:05:00.0: DMA-API: device driver failed to check map
error[device address=0x00000000df82b000] [size=4096 bytes] [mapped as page]
[  307.517494] Modules linked in:
[  307.531584]  ib_isert iscsi_target_mod ib_srpt target_core_mod rpcrdma
sunrpc ib_srp scsi_transport_srp scsi_tgt ib_iser libiscsi ib_ipoib
scsi_transport_iscsi rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm
ib_qib intel_powerclamp coretemp rdmavt intel_rapl iosf_mbi kvm_intel kvm
irqbypass crc32_pclmul ghash_clmulni_intel ipmi_ssif ib_core aesni_intel sg
ipmi_si lrw gf128mul dca glue_helper ipmi_devintf iTCO_wdt gpio_ich hpwdt
iTCO_vendor_support ablk_helper hpilo acpi_power_meter cryptd ipmi_msghandler
ie31200_edac shpchp pcc_cpufreq lpc_ich pcspkr ip_tables xfs libcrc32c sd_mod
crc_t10dif crct10dif_generic mgag200 i2c_algo_bit drm_kms_helper syscopyarea
sysfillrect sysimgblt fb_sys_fops ttm ahci crct10dif_pclmul crct10dif_common
drm crc32c_intel libahci tg3 libata serio_raw ptp i2c_core
[  307.846113]  pps_core dm_mirror dm_region_hash dm_log dm_mod
[  307.866505] CPU: 4 PID: 23867 Comm: mpitests-IMB-MP Kdump: loaded Not
tainted 3.10.0-862.el7.x86_64.debug #1
[  307.911178] Hardware name: HP ProLiant DL320e Gen8, BIOS J05 11/09/2013
[  307.944206] Call Trace:
[  307.956973]  [<ffffffffbd9e915b>] dump_stack+0x19/0x1b
[  307.982201]  [<ffffffffbd2a2f58>] __warn+0xd8/0x100
[  308.005999]  [<ffffffffbd2a2fdf>] warn_slowpath_fmt+0x5f/0x80
[  308.034260]  [<ffffffffbd5f667e>] check_unmap+0x4ee/0xa20
[  308.060801]  [<ffffffffbd41acaa>] ? page_add_file_rmap+0x2a/0x1d0
[  308.090689]  [<ffffffffbd5f6c4d>] debug_dma_unmap_page+0x9d/0xb0
[  308.120155]  [<ffffffffbd4082e0>] ? might_fault+0xa0/0xb0
[  308.146656]  [<ffffffffc07761a5>] qib_tid_free.isra.14+0x215/0x2a0 [ib_qib]
[  308.180739]  [<ffffffffc0776bf4>] qib_write+0x894/0x1280 [ib_qib]
[  308.210733]  [<ffffffffbd540b00>] ? __inode_security_revalidate+0x70/0x80
[  308.244837]  [<ffffffffbd53c2b7>] ? security_file_permission+0x27/0xb0
[  308.266025] qib_ib0.8006: multicast join failed for
ff12:401b:8006:0000:0000:0000:ffff:ffff, status -22
[  308.323421]  [<ffffffffbd46f5d3>] vfs_write+0xc3/0x1f0
[  308.347077]  [<ffffffffbd492a5c>] ? fget_light+0xfc/0x510
[  308.372533]  [<ffffffffbd47045a>] SyS_write+0x8a/0x100
[  308.396456]  [<ffffffffbd9ff355>] system_call_fastpath+0x1c/0x21

The code calls a qib_map_page() which has never correctly tested for a
mapping error.

Fix by testing for pci_dma_mapping_error() in all cases and properly
handling the failure in the caller.

Additionally, streamline qib_map_page() arguments to satisfy just
the single caller.

Cc: <stable@vger.kernel.org>
Reviewed-by: Alex Estrin <alex.estrin@intel.com>
Tested-by: Don Dutile <ddutile@redhat.com>
Reviewed-by: Don Dutile <ddutile@redhat.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tpm: fix race condition in tpm_common_write()

commit 3ab2011ea368ec3433ad49e1b9e1c7b70d2e65df upstream.

There is a race condition in tpm_common_write function allowing
two threads on the same /dev/tpm<N>, or two different applications
on the same /dev/tpmrm<N> to overwrite each other commands/responses.
Fixed this by taking the priv->buffer_mutex early in the function.

Also converted the priv->data_pending from atomic to a regular size_t
type. There is no need for it to be atomic since it is only touched
under the protection of the priv->buffer_mutex.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tpm: fix use after free in tpm2_load_context()

commit 8c81c24758ffbf17cf06c6835d361ffa57be2f0e upstream.

If load context command returns with TPM2_RC_HANDLE or TPM2_RC_REFERENCE_H0
then we have use after free in line 114 and double free in 117.

Fixes: 4d57856a21ed2 ("tpm2: add session handle context saving and restoring to the space code")
Cc: stable@vger.kernel.org
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off--by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

of: platform: stop accessing invalid dev in of_platform_device_destroy

commit 522811e944ed9b36806faa019faec10f9d259cca upstream.

Immediately after the platform_device_unregister() the device will be
cleaned up. Accessing the freed pointer immediately after that will
crash the system.

Found this bug when kernel is built with CONFIG_PAGE_POISONING and testing
loading/unloading audio drivers in a loop on Qcom platforms.

Fix this by moving of_node_clear_flag() just before the unregister calls.

Below is the crash trace:

Unable to handle kernel paging request at virtual address 6b6b6b6b6b6c03
Mem abort info:
  ESR = 0x96000021
  Exception class = DABT (current EL), IL = 32 bits
  SET = 0, FnV = 0
  EA = 0, S1PTW = 0
Data abort info:
  ISV = 0, ISS = 0x00000021
  CM = 0, WnR = 0
[006b6b6b6b6b6c03] address between user and kernel address ranges
Internal error: Oops: 96000021 [#1] PREEMPT SMP
Modules linked in:
CPU: 2 PID: 1784 Comm: sh Tainted: G        W         4.17.0-rc7-02230-ge3a63a7ef641-dirty #204
Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
pstate: 80000005 (Nzcv daif -PAN -UAO)
pc : clear_bit+0x18/0x2c
lr : of_platform_device_destroy+0x64/0xb8
sp : ffff00000c9c3930
x29: ffff00000c9c3930 x28: ffff80003d39b200
x27: ffff000008bb1000 x26: 0000000000000040
x25: 0000000000000124 x24: ffff80003a9a3080
x23: 0000000000000060 x22: ffff00000939f518
x21: ffff80003aa79e98 x20: ffff80003aa3dae0
x19: ffff80003aa3c890 x18: ffff800009feb794
x17: 0000000000000000 x16: 0000000000000000
x15: ffff800009feb790 x14: 0000000000000000
x13: ffff80003a058778 x12: ffff80003a058728
x11: ffff80003a058750 x10: 0000000000000000
x9 : 0000000000000006 x8 : ffff80003a825988
x7 : bbbbbbbbbbbbbbbb x6 : 0000000000000001
x5 : 0000000000000000 x4 : 0000000000000001
x3 : 0000000000000008 x2 : 0000000000000001
x1 : 6b6b6b6b6b6b6c03 x0 : 0000000000000000
Process sh (pid: 1784, stack limit = 0x        (ptrval))
Call trace:
clear_bit+0x18/0x2c
q6afe_remove+0x20/0x38
apr_device_remove+0x30/0x70
device_release_driver_internal+0x170/0x208
device_release_driver+0x14/0x20
bus_remove_device+0xcc/0x150
device_del+0x10c/0x310
device_unregister+0x1c/0x70
apr_remove_device+0xc/0x18
device_for_each_child+0x50/0x80
apr_remove+0x18/0x20
rpmsg_dev_remove+0x38/0x68
device_release_driver_internal+0x170/0x208
device_release_driver+0x14/0x20
bus_remove_device+0xcc/0x150
device_del+0x10c/0x310
device_unregister+0x1c/0x70
qcom_smd_remove_device+0xc/0x18
device_for_each_child+0x50/0x80
qcom_smd_unregister_edge+0x3c/0x70
smd_subdev_remove+0x18/0x28
rproc_stop+0x48/0xd8
rproc_shutdown+0x60/0xe8
state_store+0xbc/0xf8
dev_attr_store+0x18/0x28
sysfs_kf_write+0x3c/0x50
kernfs_fop_write+0x118/0x1e0
__vfs_write+0x18/0x110
vfs_write+0xa4/0x1a8
ksys_write+0x48/0xb0
sys_write+0xc/0x18
el0_svc_naked+0x30/0x34
Code: d2800022 8b400c21 f9800031 9ac32043 (c85f7c22)
---[ end trace 32020935775616a2 ]---

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

of: unittest: for strings, account for trailing \0 in property length field

commit 3b9cf7905fe3ab35ab437b5072c883e609d3498d upstream.

For strings, account for trailing \0 in property length field:

This is consistent with how dtc builds string properties.

Function __of_prop_dup() would misbehave on such properties as it duplicates
properties based on the property length field creating new string values
without trailing \0s.

Signed-off-by: Stefan M Schaeckeler <sschaeck@cisco.com>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Tested-by: Frank Rowand <frank.rowand@sony.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

of: overlay: validate offset from property fixups

commit 482137bf2aecd887ebfa8756456764a2f6a0e545 upstream.

The smatch static checker marks the data in offset as untrusted,
leading it to warn:

drivers/of/resolver.c:125 update_usages_of_a_phandle_reference()
error: buffer underflow 'prop->value' 's32min-s32max'

Add check to verify that offset is within the property data.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM64: dts: meson: disable sd-uhs modes on the libretech-cc

commit d5b4885b1dff72ac670b518cfeaac719d768bd4d upstream.

There is a problem with the sd-uhs mode when doing a soft reboot.
Switching back from 1.8v to 3.3v messes with the card, which no longer
respond (timeout errors). According to the specification, we should
perform a card reset (power cycling the card) but this is something we
cannot control on this design.

Then the only solution to restore the communication with the card is an
"unplug-plug" which is not acceptable

Until we find a solution, if any, disable the sd-uhs modes on this design.
For the people using uhs at the moment, there will a performance drop as
a result.

Fixes: 3cde63ebc85c ("ARM64: dts: meson-gxl: libretech-cc: enable high speed modes")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Cc: stable@vger.kernel.org
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: mm: Ensure writes to swapper are ordered wrt subsequent cache maintenance

commit 71c8fc0c96abf8e53e74ed4d891d671e585f9076 upstream.

When rewriting swapper using nG mappings, we must performance cache
maintenance around each page table access in order to avoid coherency
problems with the host's cacheable alias under KVM. To ensure correct
ordering of the maintenance with respect to Device memory accesses made
with the Stage-1 MMU disabled, DMBs need to be added between the
maintenance and the corresponding memory access.

This patch adds a missing DMB between writing a new page table entry and
performing a clean+invalidate on the same line.

Fixes: f992b4dfd58b ("arm64: kpti: Add ->enable callback to remap swapper using nG mappings")
Cc: <stable@vger.kernel.org> # 4.16.x-
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: kpti: Use early_param for kpti= command-line option

commit b5b7dd647f2d21b93f734ce890671cd908e69b0a upstream.

We inspect __kpti_forced early on as part of the cpufeature enable
callback which remaps the swapper page table using non-global entries.

Ensure that __kpti_forced has been updated to reflect the kpti=
command-line option before we start using it.

Fixes: ea1e3de85e94 ("arm64: entry: Add fake CPU feature for unmapping the kernel at EL0")
Cc: <stable@vger.kernel.org> # 4.16.x-
Reported-by: Wei Xu <xuwei5@hisilicon.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Fix syscall restarting around signal suppressed by tracer

commit 0fe42512b2f03f9e5a20b9f55ef1013a68b4cd48 upstream.

Commit 17c2895 ("arm64: Abstract syscallno manipulation") abstracts
out the pt_regs.syscallno value for a syscall cancelled by a tracer
as NO_SYSCALL, and provides helpers to set and check for this
condition. However, the way this was implemented has the
unintended side-effect of disabling part of the syscall restart
logic.

This comes about because the second in_syscall() check in
do_signal() re-evaluates the "in a syscall" condition based on the
updated pt_regs instead of the original pt_regs. forget_syscall()
is explicitly called prior to the second check in order to prevent
restart logic in the ret_to_user path being spuriously triggered,
which means that the second in_syscall() check always yields false.

This triggers a failure in
tools/testing/selftests/seccomp/seccomp_bpf.c, when using ptrace to
suppress a signal that interrups a nanosleep() syscall.

Misbehaviour of this type is only expected in the case where a
tracer suppresses a signal and the target process is either being
single-stepped or the interrupted syscall attempts to restart via
-ERESTARTBLOCK.

This patch restores the old behaviour by performing the
in_syscall() check only once at the start of the function.

Fixes: 17c289586009 ("arm64: Abstract syscallno manipulation")
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reported-by: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: <stable@vger.kernel.org> # 4.14.x-
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: socfpga: Fix NAND controller node compatible for Arria10

commit 3877ef7a1ccecaae378c497e1dcddbc2dccb664c upstream.

The NAND compatible "denali,denal-nand-dt" property has never been used and
is obsolete. Remove it.

Cc: stable@vger.kernel.org
Fixes: f549af06e9b6("ARM: dts: socfpga: Add NAND device tree for Arria10")
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: socfpga: Fix NAND controller clock supply

commit 4eda9b766b042ea38d84df91581b03f6145a2ab0 upstream.

The Denali NAND x-clock should be supplied by nand_x_clk, not by
nand_clk. Fix this, otherwise the Denali driver gets incorrect
clock frequency information and incorrectly configures the NAND
timing.

Cc: stable@vger.kernel.org
Signed-off-by: Marek Vasut <marex@denx.de>
Fixes: d837a80d19 ("ARM: dts: socfpga: add nand controller nodes")
Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: socfpga: Fix NAND controller node compatible

commit d9a695f3c8098ac9684689774a151cff30d8aa25 upstream.

The compatible string for the Denali NAND controller is incorrect,
fix it by replacing it with one matching the DT bindings and the
driver.

Cc: stable@vger.kernel.org
Signed-off-by: Marek Vasut <marex@denx.de>
Fixes: d837a80d19 ("ARM: dts: socfpga: add nand controller nodes")
Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: Fix SPI node for Arria10

commit 975ba94c2c3aca4d9f1ae26f3916d7787495ce86 upstream.

Remove the unused bus-num node and change num-chipselect
to num-cs to match SPI bindings.

Cc: stable@vger.kernel.org
Fixes: f2d6f8f817814 ("ARM: dts: socfpga: Add SPI Master1 for Arria10 SR chip")
Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 8764/1: kgdb: fix NUMREGBYTES so that gdb_regs[] is the correct size

commit 76ed0b803a2ab793a1b27d1dfe0de7955282cd34 upstream.

NUMREGBYTES (which is used as the size for gdb_regs[]) is incorrectly
based on DBG_MAX_REG_NUM instead of GDB_MAX_REGS. DBG_MAX_REG_NUM
is the number of total registers, while GDB_MAX_REGS is the number
of 'unsigned longs' it takes to serialize those registers. Since
FP registers require 3 'unsigned longs' each, DBG_MAX_REG_NUM is
smaller than GDB_MAX_REGS.

This causes GDB 8.0 give the following error on connect:
"Truncated register 19 in remote 'g' packet"

This also causes the register serialization/deserialization logic
to overflow gdb_regs[], overwriting whatever follows.

Fixes: 834b2964b7ab ("kgdb,arm: fix register dump")
Cc: <stable@vger.kernel.org> # 2.6.37+
Signed-off-by: David Rivshin <drivshin@allworx.com>
Acked-by: Rabin Vincent <rabin@rab.in>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cxl: Disable prefault_mode in Radix mode

commit b6c84ba22ff3a198eb8d5552cf9b8fda1d792e54 upstream.

Currently we see a kernel-oops reported on Power-9 while attaching a
context to an AFU, with radix-mode and sysfs attr 'prefault_mode' set
to anything other than 'none'. The backtrace of the oops is of this
form:

  Unable to handle kernel paging request for data at address 0x00000080
  Faulting instruction address: 0xc00800000bcf3b20
  cpu 0x1: Vector: 300 (Data Access) at [c00000037f003800]
      pc: c00800000bcf3b20: cxl_load_segment+0x178/0x290 [cxl]
      lr: c00800000bcf39f0: cxl_load_segment+0x48/0x290 [cxl]
      sp: c00000037f003a80
     msr: 9000000000009033
     dar: 80
   dsisr: 40000000
    current = 0xc00000037f280000
    paca    = 0xc0000003ffffe600   softe: 3        irq_happened: 0x01
      pid   = 3529, comm = afp_no_int
  <snip>
  cxl_prefault+0xfc/0x248 [cxl]
  process_element_entry_psl9+0xd8/0x1a0 [cxl]
  cxl_attach_dedicated_process_psl9+0x44/0x130 [cxl]
  native_attach_process+0xc0/0x130 [cxl]
  afu_ioctl+0x3f4/0x5e0 [cxl]
  do_vfs_ioctl+0xdc/0x890
  ksys_ioctl+0x68/0xf0
  sys_ioctl+0x40/0xa0
  system_call+0x58/0x6c

The issue is caused as on Power-8 the AFU attr 'prefault_mode' was
used to improve initial storage fault performance by prefaulting
process segments. However on Power-9 with radix mode we don't have
Storage-Segments that we can prefault. Also prefaulting process Pages
will be too costly and fine-grained.

Hence, since the prefaulting mechanism doesn't makes sense of
radix-mode, this patch updates prefault_mode_store() to not allow any
other value apart from CXL_PREFAULT_NONE when radix mode is enabled.

Fixes: f24be42aab37 ("cxl: Add psl9 specific code")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

soc: rockchip: power-domain: Fix wrong value when power up pd with writemask

commit 9e59c5f66c624b43c766a9fe3b2430e0e976bf0e upstream.

Solve the pd could only ever turn off but never turn them on again,
if the pd registers have the writemask bits.

So far this affects the rk3328 only.

Fixes: 79bb17ce8edb ("soc: rockchip: power-domain: Support domain control in hiword-registers")
Cc: stable@vger.kernel.org
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/fadump: Unregister fadump on kexec down path.

commit 722cde76d68e8cc4f3de42e71c82fd40dea4f7b9 upstream.

Unregister fadump on kexec down path otherwise the fadump registration
in new kexec-ed kernel complains that fadump is already registered.
This makes new kernel to continue using fadump registered by previous
kernel which may lead to invalid vmcore generation. Hence this patch
fixes this issue by un-registering fadump in fadump_cleanup() which is
called during kexec path so that new kernel can register fadump with
new valid values.

Fixes: b500afff11f6 ("fadump: Invalidate registration and release reserved memory for general use.")
Cc: stable@vger.kernel.org # v3.4+
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpuidle: powernv: Fix promotion from snooze if next state disabled

commit 0a4ec6aa035a52c422eceb2ed51ed88392a3d6c2 upstream.

The commit 78eaa10f027c ("cpuidle: powernv/pseries: Auto-promotion of
snooze to deeper idle state") introduced a timeout for the snooze idle
state so that it could be eventually be promoted to a deeper idle
state. The snooze timeout value is static and set to the target
residency of the next idle state, which would train the cpuidle
governor to pick the next idle state eventually.

The unfortunate side-effect of this is that if the next idle state(s)
is disabled, the CPU will forever remain in snooze, despite the fact
that the system is completely idle, and other deeper idle states are
available.

This patch fixes the issue by dynamically setting the snooze timeout
to the target residency of the next enabled state on the device.

Before Patch:
  POWER8 : Only nap disabled.
  $ cpupower monitor sleep 30
  sleep took 30.01297 seconds and exited with status 0
                |Idle_Stats
  PKG |CORE|CPU | snoo | Nap  | Fast
     0|   8|   0| 96.41|  0.00|  0.00
     0|   8|   1| 96.43|  0.00|  0.00
     0|   8|   2| 96.47|  0.00|  0.00
     0|   8|   3| 96.35|  0.00|  0.00
     0|   8|   4| 96.37|  0.00|  0.00
     0|   8|   5| 96.37|  0.00|  0.00
     0|   8|   6| 96.47|  0.00|  0.00
     0|   8|   7| 96.47|  0.00|  0.00

  POWER9: Shallow states (stop0lite, stop1lite, stop2lite, stop0, stop1,
  stop2) disabled:
  $ cpupower monitor sleep 30
  sleep took 30.05033 seconds and exited with status 0
                |Idle_Stats
  PKG |CORE|CPU | snoo | stop | stop | stop | stop | stop | stop | stop | stop
     0|  16|   0| 89.79|  0.00|  0.00|  0.00|  0.00|  0.00|  0.00|  0.00|  0.00
     0|  16|   1| 90.12|  0.00|  0.00|  0.00|  0.00|  0.00|  0.00|  0.00|  0.00
     0|  16|   2| 90.21|  0.00|  0.00|  0.00|  0.00|  0.00|  0.00|  0.00|  0.00
     0|  16|   3| 90.29|  0.00|  0.00|  0.00|  0.00|  0.00|  0.00|  0.00|  0.00

After Patch:
  POWER8 : Only nap disabled.
  $ cpupower monitor sleep 30
  sleep took 30.01200 seconds and exited with status 0
                |Idle_Stats
  PKG |CORE|CPU | snoo | Nap  | Fast
     0|   8|   0| 16.58|  0.00| 77.21
     0|   8|   1| 18.42|  0.00| 75.38
     0|   8|   2|  4.70|  0.00| 94.09
     0|   8|   3| 17.06|  0.00| 81.73
     0|   8|   4|  3.06|  0.00| 95.73
     0|   8|   5|  7.00|  0.00| 96.80
     0|   8|   6|  1.00|  0.00| 98.79
     0|   8|   7|  5.62|  0.00| 94.17

  POWER9: Shallow states (stop0lite, stop1lite, stop2lite, stop0, stop1,
  stop2) disabled:

  $ cpupower monitor sleep 30
  sleep took 30.02110 seconds and exited with status 0
                |Idle_Stats
  PKG |CORE|CPU | snoo | stop | stop | stop | stop | stop | stop | stop | stop
     0|   0|   0|  0.69|  0.00|  0.00|  0.00|  0.00|  0.00|  0.00|  9.39| 89.70
     0|   0|   1|  0.00|  0.00|  0.00|  0.00|  0.00|  0.00|  0.00|  0.05| 93.21
     0|   0|   2|  0.00|  0.00|  0.00|  0.00|  0.00|  0.00|  0.00|  0.00| 89.93
     0|   0|   3|  0.00|  0.00|  0.00|  0.00|  0.00|  0.00|  0.00|  0.00| 93.26

Fixes: 78eaa10f027c ("cpuidle: powernv/pseries: Auto-promotion of snooze to deeper idle state")
Cc: stable@vger.kernel.org # v4.2+
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Reviewed-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/powernv/cpuidle: Init all present cpus for deep states

commit ac9816dcbab53c57bcf1d7b15370b08f1e284318 upstream.

Init all present cpus for deep states instead of "all possible" cpus.
Init fails if a possible cpu is guarded. Resulting in making only
non-deep states available for cpuidle/hotplug.

Stewart says, this means that for single threaded workloads, if you
guard out a CPU core you'll not get WoF (Workload Optimised
Frequency), which means that performance goes down when you wouldn't
expect it to.

Fixes: 77b54e9f213f ("powernv/powerpc: Add winkle support for offline cpus")
Cc: stable@vger.kernel.org # v3.19+
Signed-off-by: Akshay Adiga <akshay.adiga@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/powernv: copy/paste - Mask SO bit in CR

commit 75743649064ec0cf5ddd69f240ef23af66dde16e upstream.

NX can set the 3rd bit in CR register for XER[SO] (Summary overflow)
which is not related to paste request. The current paste function
returns failure for a successful request when this bit is set. So mask
this bit and check the proper return status.

Fixes: 2392c8c8c045 ("powerpc/powernv/vas: Define copy/paste interfaces")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Haren Myneni <haren@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/powernv/ioda2: Remove redundant free of TCE pages

commit 98fd72fe82527fd26618062b60cfd329451f2329 upstream.

When IODA2 creates a PE, it creates an IOMMU table with it_ops::free
set to pnv_ioda2_table_free() which calls pnv_pci_ioda2_table_free_pages().

Since iommu_tce_table_put() calls it_ops::free when the last reference
to the table is released, explicit call to pnv_pci_ioda2_table_free_pages()
is not needed so let's remove it.

This should fix double free in the case of PCI hotuplug as
pnv_pci_ioda2_table_free_pages() does not reset neither
iommu_table::it_base nor ::it_size.

This was not exposed by SRIOV as it uses different code path via
pnv_pcibios_sriov_disable().

IODA1 does not inialize it_ops::free so it does not have this issue.

Fixes: c5f7700bbd2e ("powerpc/powernv: Dynamically release PE")
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/ptrace: Fix enforcement of DAWR constraints

commit cd6ef7eebf171bfcba7dc2df719c2a4958775040 upstream.

Back when we first introduced the DAWR, in commit 4ae7ebe9522a
("powerpc: Change hardware breakpoint to allow longer ranges"), we
screwed up the constraint making it a 1024 byte boundary rather than a
512. This makes the check overly permissive. Fortunately GDB is the
only real user and it always did they right thing, so we never
noticed.

This fixes the constraint to 512 bytes.

Fixes: 4ae7ebe9522a ("powerpc: Change hardware breakpoint to allow longer ranges")
Cc: stable@vger.kernel.org # v3.9+
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/perf: Fix memory allocation for core-imc based on num_possible_cpus()

commit d2032678e57fc508d7878307badde8f89b632ba3 upstream.

Currently memory is allocated for core-imc based on cpu_present_mask,
which has bit 'cpu' set iff cpu is populated. We use (cpu number / threads
per core) as the array index to access the memory.

Under some circumstances firmware marks a CPU as GUARDed CPU and boot the
system, until cleared of errors, these CPU's are unavailable for all
subsequent boots. GUARDed CPUs are possible but not present from linux
view, so it blows a hole when we assume the max length of our allocation
is driven by our max present cpus, where as one of the cpus might be online
and be beyond the max present cpus, due to the hole.
So (cpu number / threads per core) value bounds the array index and leads
to memory overflow.

Call trace observed during a guard test:

Faulting instruction address: 0xc000000000149f1c
cpu 0x69: Vector: 380 (Data Access Out of Range) at [c000003fea303420]
    pc:c000000000149f1c: prefetch_freepointer+0x14/0x30
    lr:c00000000014e0f8: __kmalloc+0x1a8/0x1ac
    sp:c000003fea3036a0
   msr:9000000000009033
   dar:c9c54b2c91dbf6b7
  current = 0xc000003fea2c0000
  paca    = 0xc00000000fddd880 softe: 3 irq_happened: 0x01
    pid   = 1, comm = swapper/104
Linux version 4.16.7-openpower1 (smc@smc-desktop) (gcc version 6.4.0
(Buildroot 2018.02.1-00006-ga8d1126)) #2 SMP Fri May 4 16:44:54 PDT 2018
enter ? for help
call trace:
__kmalloc+0x1a8/0x1ac
(unreliable)
init_imc_pmu+0x7f4/0xbf0
opal_imc_counters_probe+0x3fc/0x43c
platform_drv_probe+0x48/0x80
driver_probe_device+0x22c/0x308
__driver_attach+0xa0/0xd8
bus_for_each_dev+0x88/0xb4
driver_attach+0x2c/0x40
bus_add_driver+0x1e8/0x228
driver_register+0xd0/0x114
__platform_driver_register+0x50/0x64
opal_imc_driver_init+0x24/0x38
do_one_initcall+0x150/0x15c
kernel_init_freeable+0x250/0x254
kernel_init+0x1c/0x150
ret_from_kernel_thread+0x5c/0xc8

Allocating memory for core-imc based on cpu_possible_mask, which has
bit 'cpu' set iff cpu is populatable, will fix this issue.

Reported-by: Pridhiviraj Paidipeddi <ppaidipe@linux.vnet.ibm.com>
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Reviewed-by: Balbir Singh <bsingharora@gmail.com>
Tested-by: Pridhiviraj Paidipeddi <ppaidipe@linux.vnet.ibm.com>
Fixes: 39a846db1d57 ("powerpc/perf: Add core IMC PMU support")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/ptrace: Fix setting 512B aligned breakpoints with PTRACE_SET_DEBUGREG

commit 4f7c06e26ec9cf7fe9f0c54dc90079b6a4f4b2c3 upstream.

In commit e2a800beaca1 ("powerpc/hw_brk: Fix off by one error when
validating DAWR region end") we fixed setting the DAWR end point to
its max value via PPC_PTRACE_SETHWDEBUG. Unfortunately we broke
PTRACE_SET_DEBUGREG when setting a 512 byte aligned breakpoint.

PTRACE_SET_DEBUGREG currently sets the length of the breakpoint to
zero (memset() in hw_breakpoint_init()). This worked with
arch_validate_hwbkpt_settings() before the above patch was applied but
is now broken if the breakpoint is 512byte aligned.

This sets the length of the breakpoint to 8 bytes when using
PTRACE_SET_DEBUGREG.

Fixes: e2a800beaca1 ("powerpc/hw_brk: Fix off by one error when validating DAWR region end")
Cc: stable@vger.kernel.org # v3.11+
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/mm/hash: Add missing isync prior to kernel stack SLB switch

commit 91d06971881f71d945910de128658038513d1b24 upstream.

Currently we do not have an isync, or any other context synchronizing
instruction prior to the slbie/slbmte in _switch() that updates the
SLB entry for the kernel stack.

However that is not correct as outlined in the ISA.

From Power ISA Version 3.0B, Book III, Chapter 11, page 1133:

  "Changing the contents of ... the contents of SLB entries ... can
   have the side effect of altering the context in which data
   addresses and instruction addresses are interpreted, and in which
   instructions are executed and data accesses are performed.
   ...
   These side effects need not occur in program order, and therefore
   may require explicit synchronization by software.
   ...
   The synchronizing instruction before the context-altering
   instruction ensures that all instructions up to and including that
   synchronizing instruction are fetched and executed in the context
   that existed before the alteration."

And page 1136:

  "For data accesses, the context synchronizing instruction before the
   slbie, slbieg, slbia, slbmte, tlbie, or tlbiel instruction ensures
   that all preceding instructions that access data storage have
   completed to a point at which they have reported all exceptions
   they will cause."

We're not aware of any bugs caused by this, but it should be fixed
regardless.

Add the missing isync when updating kernel stack SLB entry.

Cc: stable@vger.kernel.org
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Flesh out change log with more ISA text & explanation]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: fix control dir setup and teardown

commit 6becdb601bae2a043d7fb9762c4d48699528ea6e upstream.

syzbot is reporting NULL pointer dereference at fuse_ctl_remove_conn() [1].
Since fc->ctl_ndents is incremented by fuse_ctl_add_conn() when new_inode()
failed, fuse_ctl_remove_conn() reaches an inode-less dentry and tries to
clear d_inode(dentry)->i_private field.

Fix by only adding the dentry to the array after being fully set up.

When tearing down the control directory, do d_invalidate() on it to get rid
of any mounts that might have been added.

[1] https://syzkaller.appspot.com/bug?id=f396d863067238959c91c0b7cfc10b163638cac6
Reported-by: syzbot <syzbot+32c236387d66c4516827@syzkaller.appspotmail.com>
Fixes: bafa96541b25 ("[PATCH] fuse: add control filesystem")
Cc: <stable@vger.kernel.org> # v2.6.18
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: don't keep dead fuse_conn at fuse_fill_super().

commit 543b8f8662fe6d21f19958b666ab0051af9db21a upstream.

syzbot is reporting use-after-free at fuse_kill_sb_blk() [1].
Since sb->s_fs_info field is not cleared after fc was released by
fuse_conn_put() when initialization failed, fuse_kill_sb_blk() finds
already released fc and tries to hold the lock. Fix this by clearing
sb->s_fs_info field after calling fuse_conn_put().

[1] https://syzkaller.appspot.com/bug?id=a07a680ed0a9290585ca424546860464dd9658db

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+ec3986119086fe4eec97@syzkaller.appspotmail.com>
Fixes: 3b463ae0c626 ("fuse: invalidation reverse calls")
Cc: John Muir <john@jmuir.com>
Cc: Csaba Henk <csaba@gluster.com>
Cc: Anand Avati <avati@redhat.com>
Cc: <stable@vger.kernel.org> # v2.6.31
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: atomic_o_trunc should truncate pagecache

commit df0e91d488276086bc07da2e389986cae0048c37 upstream.

Fuse has an "atomic_o_trunc" mode, where userspace filesystem uses the
O_TRUNC flag in the OPEN request to truncate the file atomically with the
open.

In this mode there's no need to send a SETATTR request to userspace after
the open, so fuse_do_setattr() checks this mode and returns. But this
misses the important step of truncating the pagecache.

Add the missing parts of truncation to the ATTR_OPEN branch.

Reported-by: Chad Austin <chadaustin@fb.com>
Fixes: 6ff958edbf39 ("fuse: add atomic open+truncate support")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: fix congested state leak on aborted connections

commit 8a301eb16d99983a4961f884690ec97b92e7dcfe upstream.

If a connection gets aborted while congested, FUSE can leave
nr_wb_congested[] stuck until reboot causing wait_iff_congested() to
wait spuriously which can lead to severe performance degradation.

The leak is caused by gating congestion state clearing with
fc->connected test in request_end(). This was added way back in 2009
by 26c3679101db ("fuse: destroy bdi on umount"). While the commit
description doesn't explain why the test was added, it most likely was
to avoid dereferencing bdi after it got destroyed.

Since then, bdi lifetime rules have changed many times and now we're
always guaranteed to have access to the bdi while the superblock is
alive (fc->sb).

Drop fc->connected conditional to avoid leaking congestion states.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Joshua Miller <joshmiller@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: stable@vger.kernel.org # v2.6.29+
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

printk: fix possible reuse of va_list variable

commit 988a35f8da1dec5a8cd2788054d1e717be61bf25 upstream.

I noticed that there is a possibility that printk_safe_log_store() causes
kernel oops because "args" parameter is passed to vsnprintf() again when
atomic_cmpxchg() detected that we raced. Fix this by using va_copy().

Link: http://lkml.kernel.org/r/201805112002.GIF21216.OFVHFOMLJtQFSO@I-love.SAKURA.ne.jp
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: dvyukov@google.com
Cc: syzkaller@googlegroups.com
Cc: fengguang.wu@intel.com
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 42a0bb3f71383b45 ("printk/nmi: generic solution for safe printk in NMI")
Cc: 4.7+ <stable@vger.kernel.org> # v4.7+
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: hci_qca: Avoid missing rampatch failure with userspace fw loader

commit 7dc5fe0814c35ec4e7d2e8fa30abab72e0e6a172 upstream.

AOSP use userspace firmware loader to load firmwares, which will
return -EAGAIN in case qca/rampatch_00440302.bin is not found.
Since there is no rampatch for dragonboard820c QCA controller
revision, just make it work as is.

CC: Loic Poulain <loic.poulain@linaro.org>
CC: Nicolas Dechesne <nicolas.dechesne@linaro.org>
CC: Marcel Holtmann <marcel@holtmann.org>
CC: Johan Hedberg <johan.hedberg@gmail.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipmi:bt: Set the timeout before doing a capabilities check

commit fe50a7d0393a552e4539da2d31261a59d6415950 upstream.

There was one place where the timeout value for an operation was
not being set, if a capabilities request was done from idle. Move
the timeout value setting to before where that change might be
requested.

IMHO the cause here is the invisible returns in the macros. Maybe
that's a job for later, though.

Reported-by: Nordmark Claes <Claes.Nordmark@tieto.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

branch-check: fix long->int truncation when profiling branches

commit 2026d35741f2c3ece73c11eb7e4a15d7c2df9ebe upstream.

The function __builtin_expect returns long type (see the gcc
documentation), and so do macros likely and unlikely. Unfortunatelly, when
CONFIG_PROFILE_ANNOTATED_BRANCHES is selected, the macros likely and
unlikely expand to __branch_check__ and __branch_check__ truncates the
long type to int. This unintended truncation may cause bugs in various
kernel code (we found a bug in dm-writecache because of it), so it's
better to fix __branch_check__ to return long.

Link: http://lkml.kernel.org/r/alpine.LRH.2.02.1805300818140.24812@file01.intranet.prod.int.rdu2.redhat.com
Cc: Ingo Molnar <mingo@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 1f0d69a9fc815 ("tracing: profile likely and unlikely annotations")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mips: ftrace: fix static function graph tracing

commit 6fb8656646f996d1eef42e6d56203c4915cb9e08 upstream.

ftrace_graph_caller was never run after calling ftrace_trace_function,
breaking the function graph tracer. Fix this, bringing it in line with the
x86 implementation.

While we're at it, also streamline the control flow of _mcount a bit to
reduce the number of branches.

This issue was reported before:
https://www.linux-mips.org/archives/linux-mips/2014-11/msg00295.html

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Tested-by: Matt Redfearn <matt.redfearn@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/18929/
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: stable@vger.kernel.org # v3.17+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ftrace/selftest: Have the reset_trigger code be a bit more careful

commit 756b56a9e832e063edc83be7c3889e98c536dd2b upstream.

The trigger code is picky in how it can be disabled as there may be
dependencies between different events and synthetic events. Change the order
on how triggers are reset.

1) Reset triggers of all synthetic events first
2) Remove triggers with actions attached to them
3) Remove all other triggers

If this order isn't followed, then some triggers will not be reset, and an
error may happen because a trigger is busy.

Cc: stable@vger.kernel.org
Fixes: cfa0963dc474f ("kselftests/ftrace : Add event trigger testcases")
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lib/vsprintf: Remove atomic-unsafe support for %pCr

commit 666902e42fd8344b923c02dc5b0f37948ff4f225 upstream.

"%pCr" formats the current rate of a clock, and calls clk_get_rate().
The latter obtains a mutex, hence it must not be called from atomic
context.

Remove support for this rarely-used format, as vsprintf() (and e.g.
printk()) must be callable from any context.

Any remaining out-of-tree users will start seeing the clock's name
printed instead of its rate.

Reported-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Fixes: 900cca2944254edd ("lib/vsprintf: add %pC{,n,r} format specifiers for clocks")
Link: http://lkml.kernel.org/r/1527845302-12159-5-git-send-email-geert+renesas@glider.be
To: Jia-Ju Bai <baijiaju1990@gmail.com>
To: Jonathan Corbet <corbet@lwn.net>
To: Michael Turquette <mturquette@baylibre.com>
To: Stephen Boyd <sboyd@kernel.org>
To: Zhang Rui <rui.zhang@intel.com>
To: Eduardo Valentin <edubezval@gmail.com>
To: Eric Anholt <eric@anholt.net>
To: Stefan Wahren <stefan.wahren@i2se.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-serial@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: stable@vger.kernel.org # 4.1+
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: renesas: cpg-mssr: Stop using printk format %pCr

commit ef4b0be62641d296cf4c0ad8f75ab83ab066ed51 upstream.

Printk format "%pCr" will be removed soon, as clk_get_rate() must not be
called in atomic context.

Replace it by open-coding the operation. This is safe here, as the code
runs in task context.

Link: http://lkml.kernel.org/r/1527845302-12159-2-git-send-email-geert+renesas@glider.be
To: Jia-Ju Bai <baijiaju1990@gmail.com>
To: Jonathan Corbet <corbet@lwn.net>
To: Michael Turquette <mturquette@baylibre.com>
To: Stephen Boyd <sboyd@kernel.org>
To: Zhang Rui <rui.zhang@intel.com>
To: Eduardo Valentin <edubezval@gmail.com>
To: Eric Anholt <eric@anholt.net>
To: Stefan Wahren <stefan.wahren@i2se.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-serial@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: stable@vger.kernel.org # 4.5+
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thermal: bcm2835: Stop using printk format %pCr

commit bd2a07f71a1e2e198f8a30cb551d9defe422d83d upstream.

Printk format "%pCr" will be removed soon, as clk_get_rate() must not be
called in atomic context.

Replace it by printing the variable that already holds the clock rate.
Note that calling clk_get_rate() is safe here, as the code runs in task
context.

Link: http://lkml.kernel.org/r/1527845302-12159-3-git-send-email-geert+renesas@glider.be
To: Jia-Ju Bai <baijiaju1990@gmail.com>
To: Jonathan Corbet <corbet@lwn.net>
To: Michael Turquette <mturquette@baylibre.com>
To: Stephen Boyd <sboyd@kernel.org>
To: Zhang Rui <rui.zhang@intel.com>
To: Eduardo Valentin <edubezval@gmail.com>
To: Eric Anholt <eric@anholt.net>
To: Stefan Wahren <stefan.wahren@i2se.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-serial@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # 4.12+
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: cirrus: i2s: Fix {TX|RX}LinCtrlData setup

commit 5d302ed3cc80564fb835bed5fdba1e1250ecc9e5 upstream.

According to "EP93xx User’s Guide", I2STXLinCtrlData and I2SRXLinCtrlData
registers actually have different format. The only currently used bit
(Left_Right_Justify) has different position. Fix this and simplify the
whole setup taking into account the fact that both registers have zero
default value.

The practical effect of the above is repaired SND_SOC_DAIFMT_RIGHT_J
support (currently unused).

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: cirrus: i2s: Fix LRCLK configuration

commit 2d534113be9a2aa532a1ae127a57e83558aed358 upstream.

The bit responsible for LRCLK polarity is i2s_tlrs (0), not i2s_trel (2)
(refer to "EP93xx User's Guide").

Previously card drivers which specified SND_SOC_DAIFMT_NB_IF actually got
SND_SOC_DAIFMT_NB_NF, an adaptation is necessary to retain the old
behavior.

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: cs35l35: Add use_single_rw to regmap config

commit 6a6ad7face95af0b9e6aaf1eb2261eb70240b89b upstream.

Add the use_single_rw flag to regmap config since the
device does not support bulk transactions over i2c.

Signed-off-by: Paul Handrigan <Paul.Handrigan@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: dapm: delete dapm_kcontrol_data paths list before freeing it

commit ff2faf1289c1f81b5b26b9451dd1c2006aac8db8 upstream.

dapm_kcontrol_data is freed as part of dapm_kcontrol_free(), leaving the
paths pointer dangling in the list.

This leads to system crash when we try to unload and reload sound card.
I hit this bug during ADSP crash/reboot test case on Dragon board DB410c.

Without this patch, on SLAB Poisoning enabled build, kernel crashes with
"BUG kmalloc-128 (Tainted: G W ): Poison overwritten"

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1wire: family module autoload fails because of upper/lower case mismatch.

commit 065c09563c872e52813a17218c52cd642be1dca6 upstream.

1wire family module autoload fails because of upper/lower
case mismatch.

Signed-off-by: Ingo Flaschberger <ingo.flaschberger@gmail.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: do not reset if a low-speed or full-speed device timed out

commit 6e01827ed93947895680fbdad68c072a0f4e2450 upstream.

Some low-speed and full-speed devices (for example, bluetooth)
do not have time to initialize. For them, ETIMEDOUT is a valid error.
We need to give them another try. Otherwise, they will
never be initialized correctly and in dmesg will be messages
"Bluetooth: hci0 command 0x1002 tx timeout" or similars.

Fixes: 264904ccc33c ("usb: retry reset if a device times out")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Maxim Moseychuk <franchesko.salias.hudro.pedros@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM / OPP: Update voltage in case freq == old_freq

commit c5c2a97b3ac7d1ec19e7cff9e38caca6afefc3de upstream.

This commit fixes a rare but possible case when the clk rate is updated
without update of the regulator voltage.

At boot up, CPUfreq checks if the system is running at the right freq. This
is a sanity check in case a bootloader set clk rate that is outside of freq
table present with cpufreq core. In such cases system can be unstable so
better to change it to a freq that is preset in freq-table.

The CPUfreq takes next freq that is >= policy->cur and this is our
target_freq that needs to be set now.

dev_pm_opp_set_rate(dev, target_freq) checks the target_freq and the
old_freq (a current rate). If these are equal it returns early. If not,
it searches for OPP (old_opp) that fits best to old_freq (not listed in
the table) and updates old_freq (!).

Here, we can end up with old_freq = old_opp.rate = target_freq, which
is not handled in _generic_set_opp_regulator(). It's supposed to update
voltage only when freq > old_freq  || freq > old_freq.

if (freq > old_freq) {
ret = _set_opp_voltage(dev, reg, new_supply);
[...]
if (freq < old_freq) {
ret = _set_opp_voltage(dev, reg, new_supply);
if (ret)

It results in, no voltage update while clk rate is updated.

Example:
freq-table = {
1000MHz   1.15V
666MHZ   1.10V
333MHz   1.05V
}
boot-up-freq        = 800MHz   # not listed in freq-table
freq = target_freq  = 1GHz
old_freq            = 800Mhz
old_opp = _find_freq_ceil(opp_table, &old_freq);  #(old_freq is modified!)
old_freq            = 1GHz

Fixes: 6a0712f6f199 ("PM / OPP: Add dev_pm_opp_set_rate()")
Cc: 4.6+ <stable@vger.kernel.org> # v4.6+
Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM / core: Fix supplier device runtime PM usage counter imbalance

commit 47e5abfb546a3ace23a77453dc2e9db92704c5ac upstream.

If a device link is added via device_link_add() by the driver of the
link's consumer device, the supplier's runtime PM usage counter is
going to be dropped by the pm_runtime_put_suppliers() call in
driver_probe_device().  However, in that case it is not incremented
unless the supplier driver is already present and the link is not
stateless.  That leads to a runtime PM usage counter imbalance for
the supplier device in a few cases.

To prevent that from happening, bump up the supplier runtime
PM usage counter in device_link_add() for all links with the
DL_FLAG_PM_RUNTIME flag set that are added at the consumer probe
time.  Use pm_runtime_get_noresume() for that as the callers of
device_link_add() who want the supplier to be resumed by it are
expected to pass DL_FLAG_RPM_ACTIVE in flags to it anyway, but
additionally resume the supplier if the link is added during
consumer driver probe to retain the existing behavior for the
callers depending on it.

Fixes: 21d5c57b3726 (PM / runtime: Use device links)
Reported-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: 4.10+ <stable@vger.kernel.org> # 4.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM / Domains: Fix error path during attach in genpd

commit 72038df3c580c4c326b83c86149d7ac34007532a upstream.

In case the PM domain fails to be powered on in genpd_dev_pm_attach(), it
returns -EPROBE_DEFER, but keeping the device attached to its PM domain.
This leads to problems when the next attempt to attach is re-tried. More
precisely, in that situation an -EEXIST error code is returned, because the
device already has its PM domain pointer assigned, from the first attempt.

Now, because of the sloppy error handling by the existing callers of
dev_pm_domain_attach(), probing is allowed to continue when -EEXIST is
returned. However, in such case there are no guarantees that the PM domain
is powered on by genpd, which may lead to hangs when buses/drivers tried to
access their devices.

Let's fix this behaviour, simply by detaching the device when powering on
fails in genpd_dev_pm_attach().

Cc: v4.11+ <stable@vger.kernel.org> # v4.11+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

signal/xtensa: Consistenly use SIGBUS in do_unaligned_user

commit 7de712ccc096b81d23cc0a941cd9b8cb3956605d upstream.

While working on changing this code to use force_sig_fault I
discovered that do_unaliged_user is sets si_signo to SIGBUS and passes
SIGSEGV to force_sig_info. Which is just b0rked.

The code is reporting a SIGBUS error so replace the SIGSEGV with SIGBUS.

Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: linux-xtensa@linux-xtensa.org
Cc: stable@vger.kernel.org
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Fixes: 5a0015d62668 ("[PATCH] xtensa: Architecture support for Tensilica Xtensa Part 3")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: sh-sci: Use spin_{try}lock_irqsave instead of open coding version

commit 8afb1d2c12163f77777f84616a8e9444d0050ebe upstream.

Commit 40f70c03e33a ("serial: sh-sci: add locking to console write
function to avoid SMP lockup") copied the strategy to avoid locking
problems in conjuncture with the console from the UART8250
driver. Instead using directly spin_{try}lock_irqsave(),
local_irq_save() followed by spin_{try}lock() was used. While this is
correct on mainline, for -rt it is a problem. spin_{try}lock() will
check if it is running in a valid context. Since the local_irq_save()
has already been executed, the context has changed and
spin_{try}lock() will complain. The reason why spin_{try}lock()
complains is that on -rt the spin locks are turned into mutexes and
therefore can sleep. Sleeping with interrupts disabled is not valid.

BUG: sleeping function called from invalid context at /home/wagi/work/rt/v4.4-cip-rt/kernel/locking/rtmutex.c:995
in_atomic(): 0, irqs_disabled(): 128, pid: 778, name: irq/76-eth0
CPU: 0 PID: 778 Comm: irq/76-eth0 Not tainted 4.4.126-test-cip22-rt14-00403-gcd03665c8318 #12
Hardware name: Generic RZ/G1 (Flattened Device Tree)
Backtrace:
[<c00140a0>] (dump_backtrace) from [<c001424c>] (show_stack+0x18/0x1c)
r7:c06b01f0 r6:60010193 r5:00000000 r4:c06b01f0
[<c0014234>] (show_stack) from [<c01d3c94>] (dump_stack+0x78/0x94)
[<c01d3c1c>] (dump_stack) from [<c004c134>] (___might_sleep+0x134/0x194)
r7:60010113 r6:c06d3559 r5:00000000 r4:ffffe000
[<c004c000>] (___might_sleep) from [<c04ded60>] (rt_spin_lock+0x20/0x74)
r5:c06f4d60 r4:c06f4d60
[<c04ded40>] (rt_spin_lock) from [<c02577e4>] (serial_console_write+0x100/0x118)
r5:c06f4d60 r4:c06f4d60
[<c02576e4>] (serial_console_write) from [<c0061060>] (call_console_drivers.constprop.15+0x10c/0x124)
r10:c06d2894 r9:c04e18b0 r8:00000028 r7:00000000 r6:c06d3559 r5:c06d2798
r4:c06b9914 r3:c02576e4
[<c0060f54>] (call_console_drivers.constprop.15) from [<c0062984>] (console_unlock+0x32c/0x430)
r10:c06d30d8 r9:00000028 r8:c06dd518 r7:00000005 r6:00000000 r5:c06d2798
r4:c06d2798 r3:00000028
[<c0062658>] (console_unlock) from [<c0062e1c>] (vprintk_emit+0x394/0x4f0)
r10:c06d2798 r9:c06d30ee r8:00000006 r7:00000005 r6:c06a78fc r5:00000027
r4:00000003
[<c0062a88>] (vprintk_emit) from [<c0062fa0>] (vprintk+0x28/0x30)
r10:c060bd46 r9:00001000 r8:c06b9a90 r7:c06b9a90 r6:c06b994c r5:c06b9a3c
r4:c0062fa8
[<c0062f78>] (vprintk) from [<c0062fb8>] (vprintk_default+0x10/0x14)
[<c0062fa8>] (vprintk_default) from [<c009cd30>] (printk+0x78/0x84)
[<c009ccbc>] (printk) from [<c025afdc>] (credit_entropy_bits+0x17c/0x2cc)
r3:00000001 r2:decade60 r1:c061a5ee r0:c061a523
r4:00000006
[<c025ae60>] (credit_entropy_bits) from [<c025bf74>] (add_interrupt_randomness+0x160/0x178)
r10:466e7196 r9:1f536000 r8:fffeef74 r7:00000000 r6:c06b9a60 r5:c06b9a3c
r4:dfbcf680
[<c025be14>] (add_interrupt_randomness) from [<c006536c>] (irq_thread+0x1e8/0x248)
r10:c006537c r9:c06cdf21 r8:c0064fcc r7:df791c24 r6:df791c00 r5:ffffe000
r4:df525180
[<c0065184>] (irq_thread) from [<c003fba4>] (kthread+0x108/0x11c)
r10:00000000 r9:00000000 r8:c0065184 r7:df791c00 r6:00000000 r5:df791d00
r4:decac000
[<c003fa9c>] (kthread) from [<c00101b8>] (ret_from_fork+0x14/0x3c)
r8:00000000 r7:00000000 r6:00000000 r5:c003fa9c r4:df791d00

Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Daniel Wagner <daniel.wagner@siemens.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

m68k/mac: Fix SWIM memory resource end address

commit 3e2816c1078eb2b5a3276eb83d4da156b3e2d04f upstream.

The resource size is 0x2000 == end - start + 1.
Therefore end == start + 0x2000 - 1.

Cc: Laurent Vivier <lvivier@redhat.com>
Cc: stable@vger.kernel.org # v4.14+
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

m68k/mm: Adjust VM area to be unmapped by gap size for __iounmap()

commit 3f90f9ef2dda316d64e420d5d51ba369587ccc55 upstream.

If 020/030 support is enabled, get_io_area() leaves an IO_SIZE gap
between mappings which is added to the vm_struct representing the
mapping. __ioremap() uses the actual requested size (after alignment),
while __iounmap() is passed the size from the vm_struct.

On 020/030, early termination descriptors are used to set up mappings of
extent 'size', which are validated on unmapping. The unmapped gap of
size IO_SIZE defeats the sanity check of the pmd tables, causing
__iounmap() to loop forever on 030.

On 040/060, unmapping of page table entries does not check for a valid
mapping, so the umapping loop always completes there.

Adjust size to be unmapped by the gap that had been added in the
vm_struct prior.

This fixes the hang in atari_platform_init() reported a long time ago,
and a similar one reported by Finn recently (addressed by removing
ioremap() use from the SWIM driver.

Tested on my Falcon in 030 mode - untested but should work the same on
040/060 (the extra page tables cleared there would never have been set
up anyway).

Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
[geert: Minor commit description improvements]
[geert: This was fixed in 2.4.23, but not in 2.5.x]
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86: Call fixup_exception() before notify_die() in math_error()

commit 3ae6295ccb7cf6d344908209701badbbbb503e40 upstream.

fpu__drop() has an explicit fwait which under some conditions can trigger a
fixable FPU exception while in kernel. Thus, we should attempt to fixup the
exception first, and only call notify_die() if the fixup failed just like
in do_general_protection(). The original call sequence incorrectly triggers
KDB entry on debug kernels under particular FPU-intensive workloads.

Andy noted, that this makes the whole conditional irq enable thing even
more inconsistent, but fixing that it outside the scope of this.

Signed-off-by: Siarhei Liakh <siarhei.liakh@concurrent-rt.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Borislav Petkov" <bpetkov@suse.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/DM5PR11MB201156F1CAB2592B07C79A03B17D0@DM5PR11MB2011.namprd11.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mce: Do not overwrite MCi_STATUS in mce_no_way_out()

commit 1f74c8a64798e2c488f86efc97e308b85fb7d7aa upstream.

mce_no_way_out() does a quick check during #MC to see whether some of
the MCEs logged would require the kernel to panic immediately. And it
passes a struct mce where MCi_STATUS gets written.

However, after having saved a valid status value, the next iteration
of the loop which goes over the MCA banks on the CPU, overwrites the
valid status value because we're using struct mce as storage instead of
a temporary variable.

Which leads to MCE records with an empty status value:

mce: [Hardware Error]: CPU 0: Machine Check Exception: 6 Bank 0: 0000000000000000
mce: [Hardware Error]: RIP 10:<ffffffffbd42fbd7> {trigger_mce+0x7/0x10}

In order to prevent the loss of the status register value, return
immediately when severity is a panic one so that we can panic
immediately with the first fatal MCE logged. This is also the intention
of this function and not to noodle over the banks while a fatal MCE is
already logged.

Tony: read the rest of the MCA bank to populate the struct mce fully.

Suggested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20180622095428.626-8-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mce: Fix incorrect "Machine check from unknown source" message

commit 40c36e2741d7fe1e66d6ec55477ba5fd19c9c5d2 upstream.

Some injection testing resulted in the following console log:

  mce: [Hardware Error]: CPU 22: Machine Check Exception: f Bank 1: bd80000000100134
  mce: [Hardware Error]: RIP 10:<ffffffffc05292dd> {pmem_do_bvec+0x11d/0x330 [nd_pmem]}
  mce: [Hardware Error]: TSC c51a63035d52 ADDR 3234bc4000 MISC 88
  mce: [Hardware Error]: PROCESSOR 0:50654 TIME 1526502199 SOCKET 0 APIC 38 microcode 2000043
  mce: [Hardware Error]: Run the above through 'mcelog --ascii'
  Kernel panic - not syncing: Machine check from unknown source

This confused everybody because the first line quite clearly shows
that we found a logged error in "Bank 1", while the last line says
"unknown source".

The problem is that the Linux code doesn't do the right thing
for a local machine check that results in a fatal error.

It turns out that we know very early in the handler whether the
machine check is fatal. The call to mce_no_way_out() has checked
all the banks for the CPU that took the local machine check. If
it says we must crash, we can do so right away with the right
messages.

We do scan all the banks again. This means that we might initially
not see a problem, but during the second scan find something fatal.
If this happens we print a slightly different message (so I can
see if it actually every happens).

[ bp: Remove unneeded severity assignment. ]

Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: stable@vger.kernel.org # 4.2
Link: http://lkml.kernel.org/r/52e049a497e86fd0b71c529651def8871c804df0.1527283897.git.tony.luck@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mce: Check for alternate indication of machine check recovery on Skylake

commit 4c5717da1d021cf368eabb3cb1adcaead56c0d1e upstream.

Currently we just check the "CAPID0" register to see whether the CPU
can recover from machine checks.

But there are also some special SKUs which do not have all advanced
RAS features, but do enable machine check recovery for use with NVDIMMs.

Add a check for any of bits {8:5} in the "CAPID5" register (each
reports some NVDIMM mode available, if any of them are set, then
the system supports memory machine check recovery).

Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: stable@vger.kernel.org # 4.9
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/03cbed6e99ddafb51c2eadf9a3b7c8d7a0cc204e.1527283897.git.tony.luck@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mce: Improve error message when kernel cannot recover

commit c7d606f560e4c698884697fef503e4abacdd8c25 upstream.

Since we added support to add recovery from some errors inside the kernel in:

commit b2f9d678e28c ("x86/mce: Check for faults tagged in EXTABLE_CLASS_FAULT exception table entries")

we have done a less than stellar job at reporting the cause of recoverable
machine checks that occur in other parts of the kernel. The user just gets
the unhelpful message:

mce: [Hardware Error]: Machine check: Action required: unknown MCACOD

doubly unhelpful when they check the manual for the reported IA32_MSR_STATUS.MCACOD
and see that it is listed as one of the standard recoverable values.

Add an extra rule to the MCE severity table to catch this case and report it
as:

mce: [Hardware Error]: Machine check: Data load in unrecoverable area of kernel

Fixes: b2f9d678e28c ("x86/mce: Check for faults tagged in EXTABLE_CLASS_FAULT exception table entries")
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: stable@vger.kernel.org # 4.6+
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/4cc7c465150a9a48b8b9f45d0b840278e77eb9b5.1527283897.git.tony.luck@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/xen: Add call of speculative_store_bypass_ht_init() to PV paths

commit 74899d92e66663dc7671a8017b3146dcd4735f3b upstream.

Commit:

1f50ddb4f418 ("x86/speculation: Handle HT correctly on AMD")

... added speculative_store_bypass_ht_init() to the per-CPU initialization sequence.

speculative_store_bypass_ht_init() needs to be called on each CPU for
PV guests, too.

Reported-by: Brian Woods <brian.woods@amd.com>
Tested-by: Brian Woods <brian.woods@amd.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Cc: <stable@vger.kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: boris.ostrovsky@oracle.com
Cc: xen-devel@lists.xenproject.org
Fixes: 1f50ddb4f4189243c05926b842dc1a0332195f31 ("x86/speculation: Handle HT correctly on AMD")
Link: https://lore.kernel.org/lkml/20180621084331.21228-1-jgross@suse.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/spectre_v1: Disable compiler optimizations over array_index_mask_nospec()

commit eab6870fee877258122a042bfd99ee7908c40280 upstream.

Mark Rutland noticed that GCC optimization passes have the potential to elide
necessary invocations of the array_index_mask_nospec() instruction sequence,
so mark the asm() volatile.

Mark explains:

"The volatile will inhibit *some* cases where the compiler could lift the
array_index_nospec() call out of a branch, e.g. where there are multiple
invocations of array_index_nospec() with the same arguments:

        if (idx < foo) {
                idx1 = array_idx_nospec(idx, foo)
                do_something(idx1);
        }

        < some other code >

        if (idx < foo) {
                idx2 = array_idx_nospec(idx, foo);
                do_something_else(idx2);
        }

... since the compiler can determine that the two invocations yield the same
result, and reuse the first result (likely the same register as idx was in
originally) for the second branch, effectively re-writing the above as:

        if (idx < foo) {
                idx = array_idx_nospec(idx, foo);
                do_something(idx);
        }

        < some other code >

        if (idx < foo) {
                do_something_else(idx);
        }

... if we don't take the first branch, then speculatively take the second, we
lose the nospec protection.

There's more info on volatile asm in the GCC docs:

   https://gcc.gnu.org/onlinedocs/gcc/Extended-Asm.html#Volatile
"

Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: babdde2698d4 ("x86: Implement array_index_mask_nospec")
Link: https://lkml.kernel.org/lkml/152838798950.14521.4893346294059739135.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.14.52

mm, page_alloc: do not break __GFP_THISNODE by zonelist reset

commit 7810e6781e0fcbca78b91cf65053f895bf59e85f upstream.

In __alloc_pages_slowpath() we reset zonelist and preferred_zoneref for
allocations that can ignore memory policies.  The zonelist is obtained
from current CPU's node.  This is a problem for __GFP_THISNODE
allocations that want to allocate on a different node, e.g.  because the
allocating thread has been migrated to a different CPU.

This has been observed to break SLAB in our 4.4-based kernel, because
there it relies on __GFP_THISNODE working as intended.  If a slab page
is put on wrong node's list, then further list manipulations may corrupt
the list because page_to_nid() is used to determine which node's
list_lock should be locked and thus we may take a wrong lock and race.

Current SLAB implementation seems to be immune by luck thanks to commit
511e3a058812 ("mm/slab: make cache_grow() handle the page allocated on
arbitrary node") but there may be others assuming that __GFP_THISNODE
works as promised.

We can fix it by simply removing the zonelist reset completely.  There
is actually no reason to reset it, because memory policies and cpusets
don't affect the zonelist choice in the first place.  This was different
when commit 183f6371aac2 ("mm: ignore mempolicies when using
ALLOC_NO_WATERMARK") introduced the code, as mempolicies provided their
own restricted zonelists.

We might consider this for 4.17 although I don't know if there's
anything currently broken.

SLAB is currently not affected, but in kernels older than 4.7 that don't
yet have 511e3a058812 ("mm/slab: make cache_grow() handle the page
allocated on arbitrary node") it is.  That's at least 4.4 LTS.  Older
ones I'll have to check.

So stable backports should be more important, but will have to be
reviewed carefully, as the code went through many changes.  BTW I think
that also the ac->preferred_zoneref reset is currently useless if we
don't also reset ac->nodemask from a mempolicy to NULL first (which we
probably should for the OOM victims etc?), but I would leave that for a
separate patch.

Link: http://lkml.kernel.org/r/20180525130853.13915-1-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Fixes: 183f6371aac2 ("mm: ignore mempolicies when using ALLOC_NO_WATERMARK")
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/binfmt_misc.c: do not allow offset overflow

commit 5cc41e099504b77014358b58567c5ea6293dd220 upstream.

WHen registering a new binfmt_misc handler, it is possible to overflow
the offset to get a negative value, which might crash the system, or
possibly leak kernel data.

Here is a crash log when 2500000000 was used as an offset:

  BUG: unable to handle kernel paging request at ffff989cfd6edca0
  IP: load_misc_binary+0x22b/0x470 [binfmt_misc]
  PGD 1ef3e067 P4D 1ef3e067 PUD 0
  Oops: 0000 [#1] SMP NOPTI
  Modules linked in: binfmt_misc kvm_intel ppdev kvm irqbypass joydev input_leds serio_raw mac_hid parport_pc qemu_fw_cfg parpy
  CPU: 0 PID: 2499 Comm: bash Not tainted 4.15.0-22-generic #24-Ubuntu
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.1-1 04/01/2014
  RIP: 0010:load_misc_binary+0x22b/0x470 [binfmt_misc]
  Call Trace:
    search_binary_handler+0x97/0x1d0
    do_execveat_common.isra.34+0x667/0x810
    SyS_execve+0x31/0x40
    do_syscall_64+0x73/0x130
    entry_SYSCALL_64_after_hwframe+0x3d/0xa2

Use kstrtoint instead of simple_strtoul.  It will work as the code
already set the delimiter byte to '\0' and we only do it when the field
is not empty.

Tested with offsets -1, 2500000000, UINT_MAX and INT_MAX.  Also tested
with examples documented at Documentation/admin-guide/binfmt-misc.rst
and other registrations from packages on Ubuntu.

Link: http://lkml.kernel.org/r/20180529135648.14254-1-cascardo@canonical.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vhost: fix info leak due to uninitialized memory

commit 670ae9caaca467ea1bfd325cb2a5c98ba87f94ad upstream.

struct vhost_msg within struct vhost_msg_node is copied to userspace.
Unfortunately it turns out on 64 bit systems vhost_msg has padding after
type which gcc doesn't initialize, leaking 4 uninitialized bytes to
userspace.

This padding also unfortunately means 32 bit users of this interface are
broken on a 64 bit kernel which will need to be fixed separately.

Fixes: CVE-2018-1118
Cc: stable@vger.kernel.org
Reported-by: Kevin Easton <kevin@guarana.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reported-by: syzbot+87cfa083e727a224754b@syzkaller.appspotmail.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: wacom: Correct logical maximum Y for 2nd-gen Intuos Pro large

commit d471b6b22d37bf9928c6d0202bdaaf76583b8b61 upstream.

The HID descriptor for the 2nd-gen Intuos Pro large (PTH-860) contains
a typo which defines an incorrect logical maximum Y value. This causes
a small portion of the bottom of the tablet to become unusable (both
because the area is below the "bottom" of the tablet and because
'wacom_wac_event' ignores out-of-range values). It also results in a
skewed aspect ratio.

To fix this, we add a quirk to 'wacom_usage_mapping' which overwrites
the data with the correct value.

Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
CC: stable@vger.kernel.org # v4.10+
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: intel_ish-hid: ipc: register more pm callbacks to support hibernation

commit ebeaa367548e9e92dd9374b9464ff6e7d157117b upstream.

Current ISH driver only registers suspend/resume PM callbacks which don't
support hibernation (suspend to disk). Basically after hiberation, the ISH
can't resume properly and user may not see sensor events (for example: screen
rotation may not work).

User will not see a crash or panic or anything except the following message
in log:

hid-sensor-hub 001F:8086:22D8.0001: timeout waiting for response from ISHTP device

So this patch adds support for S4/hiberbation to ISH by using the
SIMPLE_DEV_PM_OPS() MACRO instead of struct dev_pm_ops directly. The suspend
and resume functions will now be used for both suspend to RAM and hibernation.

If power management is disabled, SIMPLE_DEV_PM_OPS will do nothing, the suspend
and resume related functions won't be used, so mark them as __maybe_unused to
clarify that this is the intended behavior, and remove #ifdefs for power
management.

Cc: stable@vger.kernel.org
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

orangefs: report attributes_mask and attributes for statx

commit 7f54910fa8dfe504f2e1563f4f6ddc3294dfbf3a upstream.

OrangeFS formerly failed to set attributes_mask with the result that
software could not see immutable and append flags present in the
filesystem.

Reported-by: Becky Ligon <ligon@clemson.edu>
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Fixes: 68a24a6cc4a6 ("orangefs: implement statx")
Cc: stable@vger.kernel.org
Cc: hubcap@omnibond.com
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

orangefs: set i_size on new symlink

commit f6a4b4c9d07dda90c7c29dae96d6119ac6425dca upstream.

As long as a symlink inode remains in-core, the destination (and
therefore size) will not be re-fetched from the server, as it cannot
change.  The original implementation of the attribute cache assumed that
setting the expiry time in the past was sufficient to cause a re-fetch
of all attributes on the next getattr.  That does not work in this case.

The bug manifested itself as follows.  When the command sequence

touch foo; ln -s foo bar; ls -l bar

is run, the output was

lrwxrwxrwx. 1 fedora fedora 4906 Apr 24 19:10 bar -> foo

However, after a re-mount, ls -l bar produces

lrwxrwxrwx. 1 fedora fedora    3 Apr 24 19:10 bar -> foo

After this commit, even before a re-mount, the output is

lrwxrwxrwx. 1 fedora fedora    3 Apr 24 19:10 bar -> foo

Reported-by: Becky Ligon <ligon@clemson.edu>
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Fixes: 71680c18c8f2 ("orangefs: Cache getattr results.")
Cc: stable@vger.kernel.org
Cc: hubcap@omnibond.com
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: fw: harden page loading code

commit 9039d985811d5b109b58b202b7594fd24e433fed upstream.

The page loading code trusts the data provided in the firmware images
a bit too much and may cause a buffer overflow or copy unknown data if
the block sizes don't match what we expect.

To prevent potential problems, harden the code by checking if the
sizes we are copying are what we expect.

Cc: stable@vger.kernel.org
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/intel_rdt: Enable CMT and MBM on new Skylake stepping

commit 1d9f3e20a56d33e55748552aeec597f58542f92d upstream.

New stepping of Skylake has fixes for cache occupancy and memory
bandwidth monitoring.

Update the code to enable these by default on newer steppings.

Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: stable@vger.kernel.org # v4.14
Cc: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Link: https://lkml.kernel.org/r/20180608160732.9842-1-tony.luck@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

w1: mxc_w1: Enable clock before calling clk_get_rate() on it

commit 955bc61328dc0a297fb3baccd84e9d3aee501ed8 upstream.

According to the API, you may only call clk_get_rate() after actually
enabling it.

Found by Linux Driver Verification project (linuxtesting.org).

Fixes: a5fd9139f74c ("w1: add 1-wire master driver for i.MX27 / i.MX31")
Signed-off-by: Stefan Potyra <Stefan.Potyra@elektrobit.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libata: Drop SanDisk SD7UB3Q*G1001 NOLPM quirk

commit 2cfce3a86b64b53f0a70e92a6a659c720c319b45 upstream.

Commit 184add2ca23c ("libata: Apply NOLPM quirk for SanDisk
SD7UB3Q*G1001 SSDs") disabled LPM for SanDisk SD7UB3Q*G1001 SSDs.

This has lead to several reports of users of that SSD where LPM
was working fine and who know have a significantly increased idle
power consumption on their laptops.

Likely there is another problem on the T450s from the original
reporter which gets exposed by the uncore reaching deeper sleep
states (higher PC-states) due to LPM being enabled. The problem as
reported, a hardfreeze about once a day, already did not sound like
it would be caused by LPM and the reports of the SSD working fine
confirm this. The original reporter is ok with dropping the quirk.

A X250 user has reported the same hard freeze problem and for him
the problem went away after unrelated updates, I suspect some GPU
driver stack changes fixed things.

TL;DR: The original reporters problem were triggered by LPM but not
an LPM issue, so drop the quirk for the SSD in question.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1583207
Cc: stable@vger.kernel.org
Cc: Richard W.M. Jones <rjones@redhat.com>
Cc: Lorenzo Dalrio <lorenzo.dalrio@gmail.com>
Reported-by: Lorenzo Dalrio <lorenzo.dalrio@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: "Richard W.M. Jones" <rjones@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libata: zpodd: small read overflow in eject_tray()

commit 18c9a99bce2a57dfd7e881658703b5d7469cc7b9 upstream.

We read from the cdb[] buffer in ata_exec_internal_sg(). It has to be
ATAPI_CDB_LEN (16) bytes long, but this buffer is only 12 bytes.

Fixes: 213342053db5 ("libata: handle power transition of ODD")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpufreq: governors: Fix long idle detection logic in load calculation

commit 7592019634f8473f0b0973ce79297183077bdbc2 upstream.

According to current code implementation, detecting the long
idle period is done by checking if the interval between two
adjacent utilization update handlers is long enough. Although
this mechanism can detect if the idle period is long enough
(no utilization hooks invoked during idle period), it might
not cover a corner case: if the task has occupied the CPU
for too long which causes no context switches during that
period, then no utilization handler will be launched until this
high prio task is scheduled out. As a result, the idle_periods
field might be calculated incorrectly because it regards the
100% load as 0% and makes the conservative governor who uses
this field confusing.

Change the detection to compare the idle_time with sampling_rate
directly.

Reported-by: Artem S. Tashkinov <t.artem@mailcity.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpufreq: Fix new policy initialization during limits updates via sysfs

commit c7d1f119c48f64bebf0fa1e326af577c6152fe30 upstream.

If the policy limits are updated via cpufreq_update_policy() and
subsequently via sysfs, the limits stored in user_policy may be
set incorrectly.

For example, if both min and max are set via sysfs to the maximum
available frequency, user_policy.min and user_policy.max will also
be the maximum. If a policy notifier triggered by
cpufreq_update_policy() lowers both the min and the max at this
point, that change is not reflected by the user_policy limits, so
if the max is updated again via sysfs to the same lower value,
then user_policy.max will be lower than user_policy.min which
shouldn't happen. In particular, if one of the policy CPUs is
then taken offline and back online, cpufreq_set_policy() will
fail for it due to a failing limits check.

To prevent that from happening, initialize the min and max fields
of the new_policy object to the ones stored in user_policy that
were previously set via sysfs.

Signed-off-by: Kevin Wangtao <kevin.wangtao@hisilicon.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Subject & changelog ]
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bdi: Move cgroup bdi_writeback to a dedicated low concurrency workqueue

commit f183464684190bacbfb14623bd3e4e51b7575b4c upstream.

From 0aa2e9b921d6db71150633ff290199554f0842a8 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Wed, 23 May 2018 10:29:00 -0700

cgwb_release() punts the actual release to cgwb_release_workfn() on
system_wq.  Depending on the number of cgroups or block devices, there
can be a lot of cgwb_release_workfn() in flight at the same time.

We're periodically seeing close to 256 kworkers getting stuck with the
following stack trace and overtime the entire system gets stuck.

  [<ffffffff810ee40c>] _synchronize_rcu_expedited.constprop.72+0x2fc/0x330
  [<ffffffff810ee634>] synchronize_rcu_expedited+0x24/0x30
  [<ffffffff811ccf23>] bdi_unregister+0x53/0x290
  [<ffffffff811cd1e9>] release_bdi+0x89/0xc0
  [<ffffffff811cd645>] wb_exit+0x85/0xa0
  [<ffffffff811cdc84>] cgwb_release_workfn+0x54/0xb0
  [<ffffffff810a68d0>] process_one_work+0x150/0x410
  [<ffffffff810a71fd>] worker_thread+0x6d/0x520
  [<ffffffff810ad3dc>] kthread+0x12c/0x160
  [<ffffffff81969019>] ret_from_fork+0x29/0x40
  [<ffffffffffffffff>] 0xffffffffffffffff

The events leading to the lockup are...

1. A lot of cgwb_release_workfn() is queued at the same time and all
   system_wq kworkers are assigned to execute them.

2. They all end up calling synchronize_rcu_expedited().  One of them
   wins and tries to perform the expedited synchronization.

3. However, that invovles queueing rcu_exp_work to system_wq and
   waiting for it.  Because #1 is holding all available kworkers on
   system_wq, rcu_exp_work can't be executed.  cgwb_release_workfn()
   is waiting for synchronize_rcu_expedited() which in turn is waiting
   for cgwb_release_workfn() to free up some of the kworkers.

We shouldn't be scheduling hundreds of cgwb_release_workfn() at the
same time.  There's nothing to be gained from that.  This patch
updates cgwb release path to use a dedicated percpu workqueue with
@max_active of 1.

While this resolves the problem at hand, it might be a good idea to
isolate rcu_exp_work to its own workqueue too as it can be used from
various paths and is prone to this sort of indirect A-A deadlocks.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blk-mq: reinit q->tag_set_list entry only after grace period

commit a347c7ad8edf4c5685154f3fdc3c12fc1db800ba upstream.

It is not allowed to reinit q->tag_set_list list entry while RCU grace
period has not completed yet, otherwise the following soft lockup in
blk_mq_sched_restart() happens:

[ 1064.252652] watchdog: BUG: soft lockup - CPU#12 stuck for 23s! [fio:9270]
[ 1064.254445] task: ffff99b912e8b900 task.stack: ffffa6d54c758000
[ 1064.254613] RIP: 0010:blk_mq_sched_restart+0x96/0x150
[ 1064.256510] Call Trace:
[ 1064.256664]  <IRQ>
[ 1064.256824]  blk_mq_free_request+0xea/0x100
[ 1064.256987]  msg_io_conf+0x59/0xd0 [ibnbd_client]
[ 1064.257175]  complete_rdma_req+0xf2/0x230 [ibtrs_client]
[ 1064.257340]  ? ibtrs_post_recv_empty+0x4d/0x70 [ibtrs_core]
[ 1064.257502]  ibtrs_clt_rdma_done+0xd1/0x1e0 [ibtrs_client]
[ 1064.257669]  ib_create_qp+0x321/0x380 [ib_core]
[ 1064.257841]  ib_process_cq_direct+0xbd/0x120 [ib_core]
[ 1064.258007]  irq_poll_softirq+0xb7/0xe0
[ 1064.258165]  __do_softirq+0x106/0x2a2
[ 1064.258328]  irq_exit+0x92/0xa0
[ 1064.258509]  do_IRQ+0x4a/0xd0
[ 1064.258660]  common_interrupt+0x7a/0x7a
[ 1064.258818]  </IRQ>

Meanwhile another context frees other queue but with the same set of
shared tags:

[ 1288.201183] INFO: task bash:5910 blocked for more than 180 seconds.
[ 1288.201833] bash            D    0  5910   5820 0x00000000
[ 1288.202016] Call Trace:
[ 1288.202315]  schedule+0x32/0x80
[ 1288.202462]  schedule_timeout+0x1e5/0x380
[ 1288.203838]  wait_for_completion+0xb0/0x120
[ 1288.204137]  __wait_rcu_gp+0x125/0x160
[ 1288.204287]  synchronize_sched+0x6e/0x80
[ 1288.204770]  blk_mq_free_queue+0x74/0xe0
[ 1288.204922]  blk_cleanup_queue+0xc7/0x110
[ 1288.205073]  ibnbd_clt_unmap_device+0x1bc/0x280 [ibnbd_client]
[ 1288.205389]  ibnbd_clt_unmap_dev_store+0x169/0x1f0 [ibnbd_client]
[ 1288.205548]  kernfs_fop_write+0x109/0x180
[ 1288.206328]  vfs_write+0xb3/0x1a0
[ 1288.206476]  SyS_write+0x52/0xc0
[ 1288.206624]  do_syscall_64+0x68/0x1d0
[ 1288.206774]  entry_SYSCALL_64_after_hwframe+0x3d/0xa2

What happened is the following:

1. There are several MQ queues with shared tags.
2. One queue is about to be freed and now task is in
   blk_mq_del_queue_tag_set().
3. Other CPU is in blk_mq_sched_restart() and loops over all queues in
   tag list in order to find hctx to restart.

Because linked list entry was modified in blk_mq_del_queue_tag_set()
without proper waiting for a grace period, blk_mq_sched_restart()
never ends, spining in list_for_each_entry_rcu_rr(), thus soft lockup.

Fix is simple: reinit list entry after an RCU grace period elapsed.

Fixes: Fixes: 705cda97ee3a ("blk-mq: Make it safe to use RCU to iterate over blk_mq_tag_set.tag_list")
Cc: stable@vger.kernel.org
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: linux-block@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Roman Pen <roman.penyaev@profitbricks.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nbd: use bd_set_size when updating disk size

commit 9e2b19675d1338d2a38e99194756f2db44a081df upstream.

When we stopped relying on the bdev everywhere I broke updating the
block device size on the fly, which ceph relies on. We can't just do
set_capacity, we also have to do bd_set_size so things like parted will
notice the device size change.

Fixes: 29eaadc ("nbd: stop using the bdev everywhere")
cc: stable@vger.kernel.org
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nbd: update size when connected

commit c3f7c9397609705ef848cc98a5fb429b3e90c3c4 upstream.

I messed up changing the size of an NBD device while it was connected by
not actually updating the device or doing the uevent. Fix this by
updating everything if we're connected and we change the size.

cc: stable@vger.kernel.org
Fixes: 639812a ("nbd: don't set the device size until we're connected")
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nbd: fix nbd device deletion

commit 8364da4751cf22201d74933d5e634176f44ed407 upstream.

This fixes a use after free bug, we shouldn't be doing disk->queue right
after we do del_gendisk(disk). Save the queue and do the cleanup after
the del_gendisk.

Fixes: c6a4759ea0c9 ("nbd: add device refcounting")
cc: stable@vger.kernel.org
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: For SMB2 security informaion query, check for minimum sized security descriptor instead of sizeof FileAllInformation class

commit ee25c6dd7b05113783ce1f4fab6b30fc00d29b8d upstream.

Validate_buf () function checks for an expected minimum sized response
passed to query_info() function.
For security information, the size of a security descriptor can be
smaller (one subauthority, no ACEs) than the size of the structure
that defines FileInfoClass of FileAllInformation.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199725
Cc: <stable@vger.kernel.org>
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: Noah Morrison <noah.morrison@rubrik.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

CIFS: 511c54a2f69195b28afb9dd119f03787b1625bb4 adds a check for session expiry

commit d81243c697ffc71f983736e7da2db31a8be0001f upstream.

Handle this additional status in the same way as SESSION_EXPIRED.

Signed-off-by: Mark Syms <mark.syms@citrix.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

smb3: on reconnect set PreviousSessionId field

commit b2adf22fdfba85a6701c481faccdbbb3a418ccfc upstream.

The server detects reconnect by the (non-zero) value in PreviousSessionId
of SMB2/SMB3 SessionSetup request, but this behavior regressed due
to commit 166cea4dc3a4f66f020cfb9286225ecd228ab61d
("SMB2: Separate RawNTLMSSP authentication from SMB2_sess_setup")

CC: Stable <stable@vger.kernel.org>
CC: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

smb3: fix various xid leaks

commit cfe89091644c441a1ade6dae6d2e47b715648615 upstream.

Fix a few cases where we were not freeing the xid which led to
active requests being non-zero at unmount time.

Signed-off-by: Steve French <smfrench@gmail.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/MCE: Fix stack out-of-bounds write in mce-inject.c: Flags_read()

commit 985c78d3ff8e9c74450fa2bb08eb55e680d999ca upstream.

Each of the strings that we want to put into the buf[MAX_FLAG_OPT_SIZE]
in flags_read() is two characters long. But the sprintf() adds
a trailing newline and will add a terminating NUL byte. So
MAX_FLAG_OPT_SIZE needs to be 4.

sprintf() calls vsnprintf() and *that* does return:

" * The return value is the number of characters which would
* be generated for the given input, excluding the trailing
* '\0', as per ISO C99."

Note the "excluding".

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20180427163707.ktaiysvbk3yhk4wm@agluck-desk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda: add dock and led support for HP ProBook 640 G4

commit 7eef32c1ef895a3a96463f9cbd04203007cd5555 upstream.

This patch adds missing initialisation for HP 2013 UltraSlim Dock
Line-In/Out PINs and activates keyboard mute/micmute leds
for HP ProBook 640 G4

Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda: add dock and led support for HP EliteBook 830 G5

commit 2861751f67b91e1d24e68010ced96614fb3140f4 upstream.

This patch adds missing initialisation for HP 2013 UltraSlim Dock
Line-In/Out PINs and activates keyboard mute/micmute leds
for HP EliteBook 830 G5

Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Handle kzalloc() failure in snd_hda_attach_pcm_stream()

commit a3aa60d511746bd6c0d0366d4eb90a7998bcde8b upstream.

When 'kzalloc()' fails in 'snd_hda_attach_pcm_stream()', a new pcm instance is
created without setting its operators via 'snd_pcm_set_ops()'. Following
operations on the new pcm instance can trigger kernel null pointer dereferences
and cause kernel oops.

This bug was found with my work on building a gray-box fault-injection tool for
linux-kernel-module binaries. A kernel null pointer dereference was confirmed
from line 'substream->ops->open()' in function 'snd_pcm_open_substream()' in
file 'sound/core/pcm_native.c'.

This patch fixes the bug by calling 'snd_device_free()' in the error handling
path of 'kzalloc()', which removes the new pcm instance from the snd card before
returns with an error code.

Signed-off-by: Bo Chen <chenbo@pdx.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/conexant - Add fixup for HP Z2 G4 workstation

commit f16041df4c360eccacfe90f96673b37829e4c959 upstream.

HP Z2 G4 requires the same workaround as other HP machines that have
no mic-pin detection.

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Enable mic-mute hotkey for several Lenovo AIOs

commit 986376b68dcc95bb7df60ad30c2353c1f7578fa5 upstream.

We have several Lenovo AIOs like M810z, M820z and M920z, they have
the same design for mic-mute hotkey and led and they use the same
codec with the same pin configuration, so use the pin conf table to
apply fix to all of them.

Fixes: 29693efcea0f ("ALSA: hda - Fix micmute hotkey problem for a lenovo AIO machine")
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: scrub: Don't use inode pages for device replace

commit ac0b4145d662a3b9e34085dea460fb06ede9b69b upstream.

[BUG]
Btrfs can create compressed extent without checksum (even though it
shouldn't), and if we then try to replace device containing such extent,
the result device will contain all the uncompressed data instead of the
compressed one.

Test case already submitted to fstests:
https://patchwork.kernel.org/patch/10442353/

[CAUSE]
When handling compressed extent without checksum, device replace will
goe into copy_nocow_pages() function.

In that function, btrfs will get all inodes referring to this data
extents and then use find_or_create_page() to get pages direct from that
inode.

The problem here is, pages directly from inode are always uncompressed.
And for compressed data extent, they mismatch with on-disk data.
Thus this leads to corrupted compressed data extent written to replace
device.

[FIX]
In this attempt, we could just remove the "optimization" branch, and let
unified scrub_pages() to handle it.

Although scrub_pages() won't bother reusing page cache, it will be a
little slower, but it does the correct csum checking and won't cause
such data corruption caused by "optimization".

Note about the fix: this is the minimal fix that can be backported to
older stable trees without conflicts. The whole callchain from
copy_nocow_pages() can be deleted, and will be in followup patches.

Fixes: ff023aac3119 ("Btrfs: add code to scrub to copy read data to another disk")
CC: stable@vger.kernel.org # 4.4+
Reported-by: James Harvey <jamespharvey20@gmail.com>
Reviewed-by: James Harvey <jamespharvey20@gmail.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
[ remove code removal, add note why ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: return error value if create_io_em failed in cow_file_range

commit 090a127afa8f73e9618d4058d6755f7ec7453dd6 upstream.

In cow_file_range(), create_io_em() may fail, but its return value is
not recorded. Then return value may be 0 even it failed which is a
wrong behavior.

Let cow_file_range() return PTR_ERR(em) if create_io_em() failed.

Fixes: 6f9994dbabe5 ("Btrfs: create a helper to create em for IO")
CC: stable@vger.kernel.org # 4.11+
Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: fix memory and mount leak in btrfs_ioctl_rm_dev_v2()

commit fd4e994bd1f9dc9628e168a7f619bf69f6984635 upstream.

If we have invalid flags set, when we error out we must drop our writer
counter and free the buffer we allocated for the arguments. This bug is
trivially reproduced with the following program on 4.7+:

#include <fcntl.h>
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/ioctl.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <linux/btrfs.h>
#include <linux/btrfs_tree.h>

int main(int argc, char **argv)
{
struct btrfs_ioctl_vol_args_v2 vol_args = {
.flags = UINT64_MAX,
};
int ret;
int fd;

if (argc != 2) {
fprintf(stderr, "usage: %s PATH\n", argv[0]);
return EXIT_FAILURE;
}

fd = open(argv[1], O_WRONLY);
if (fd == -1) {
perror("open");
return EXIT_FAILURE;
}

ret = ioctl(fd, BTRFS_IOC_RM_DEV_V2, &vol_args);
if (ret == -1)
perror("ioctl");

close(fd);
return EXIT_SUCCESS;
}

When unmounting the filesystem, we'll hit the
WARN_ON(mnt_get_writers(mnt)) in cleanup_mnt() and also may prevent the
filesystem to be remounted read-only as the writer count will stay
lifted.

Fixes: 6b526ed70cf1 ("btrfs: introduce device delete by devid")
CC: stable@vger.kernel.org # 4.9+
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Su Yue <suy.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: fix clone vs chattr NODATASUM race

commit b5c40d598f5408bd0ca22dfffa82f03cd9433f23 upstream.

In btrfs_clone_files(), we must check the NODATASUM flag while the
inodes are locked. Otherwise, it's possible that btrfs_ioctl_setflags()
will change the flags after we check and we can end up with a party
checksummed file.

The race window is only a few instructions in size, between the if and
the locks which is:

3834         if (S_ISDIR(src->i_mode) || S_ISDIR(inode->i_mode))
3835                 return -EISDIR;

where the setflags must be run and toggle the NODATASUM flag (provided
the file size is 0).  The clone will block on the inode lock, segflags
takes the inode lock, changes flags, releases log and clone continues.

Not impossible but still needs a lot of bad luck to hit unintentionally.

Fixes: 0e7b824c4ef9 ("Btrfs: don't make a file partly checksummed through file clone")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

driver core: Don't ignore class_dir_create_and_add() failure.

commit 84d0c27d6233a9ba0578b20f5a09701eb66cee42 upstream.

syzbot is hitting WARN() at kernfs_add_one() [1].
This is because kernfs_create_link() is confused by previous device_add()
call which continued without setting dev->kobj.parent field when
get_device_parent() failed by memory allocation fault injection.
Fix this by propagating the error from class_dir_create_and_add() to
the calllers of get_device_parent().

[1] https://syzkaller.appspot.com/bug?id=fae0fb607989ea744526d1c082a5b8de6529116f

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+df47f81c226b31d89fb1@syzkaller.appspotmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix fencepost error in check for inode count overflow during resize

commit 4f2f76f751433908364ccff82f437a57d0e6e9b7 upstream.

ext4_resize_fs() has an off-by-one bug when checking whether growing of
a filesystem will not overflow inode count. As a result it allows a
filesystem with 8192 inodes per group to grow to 64TB which overflows
inode count to 0 and makes filesystem unusable. Fix it.

Cc: stable@vger.kernel.org
Fixes: 3f8a6411fbada1fa482276591e037f3b1adcf55b
Reported-by: Jaco Kroon <jaco@uls.co.za>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: correctly handle a zero-length xattr with a non-zero e_value_offs

commit 8a2b307c21d4b290e3cbe33f768f194286d07c23 upstream.

Ext4 will always create ext4 extended attributes which do not have a
value (where e_value_size is zero) with e_value_offs set to zero.  In
most places e_value_offs will not be used in a substantive way if
e_value_size is zero.

There was one exception to this, which is in ext4_xattr_set_entry(),
where if there is a maliciously crafted file system where there is an
extended attribute with e_value_offs is non-zero and e_value_size is
0, the attempt to remove this xattr will result in a negative value
getting passed to memmove, leading to the following sadness:

[   41.225365] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[   44.538641] BUG: unable to handle kernel paging request at ffff9ec9a3000000
[   44.538733] IP: __memmove+0x81/0x1a0
[   44.538755] PGD 1249bd067 P4D 1249bd067 PUD 1249c1067 PMD 80000001230000e1
[   44.538793] Oops: 0003 [#1] SMP PTI
[   44.539074] CPU: 0 PID: 1470 Comm: poc Not tainted 4.16.0-rc1+ #1
    ...
[   44.539475] Call Trace:
[   44.539832]  ext4_xattr_set_entry+0x9e7/0xf80
    ...
[   44.539972]  ext4_xattr_block_set+0x212/0xea0
    ...
[   44.540041]  ext4_xattr_set_handle+0x514/0x610
[   44.540065]  ext4_xattr_set+0x7f/0x120
[   44.540090]  __vfs_removexattr+0x4d/0x60
[   44.540112]  vfs_removexattr+0x75/0xe0
[   44.540132]  removexattr+0x4d/0x80
    ...
[   44.540279]  path_removexattr+0x91/0xb0
[   44.540300]  SyS_removexattr+0xf/0x20
[   44.540322]  do_syscall_64+0x71/0x120
[   44.540344]  entry_SYSCALL_64_after_hwframe+0x21/0x86

https://bugzilla.kernel.org/show_bug.cgi?id=199347

This addresses CVE-2018-10840.

Reported-by: "Xu, Wen" <wen.xu@gatech.edu>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Cc: stable@kernel.org
Fixes: dec214d00e0d7 ("ext4: xattr inode deduplication")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: bubble errors from ext4_find_inline_data_nolock() up to ext4_iget()

commit eb9b5f01c33adebc31cbc236c02695f605b0e417 upstream.

If ext4_find_inline_data_nolock() returns an error it needs to get
reflected up to ext4_iget(). In order to fix this,
ext4_iget_extra_inode() needs to return an error (and not return
void).

This is related to "ext4: do not allow external inodes for inline
data" (which fixes CVE-2018-11412) in that in the errors=continue
case, it would be useful to for userspace to receive an error
indicating that file system is corrupted.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>