review.tizen.org Git - platform/kernel/linux-exynos.git/log

Merge branches 'for-4.10/asus', 'for-4.10/cp2112', 'for-4.10/i2c-hid-nopower', 'for-4.10/intel-ish', 'for-4.10/mayflash', 'for-4.10/microsoft-surface-3', 'for-4.10/multitouch', 'for-4.10/sony', 'for-4.10/udraw-ps3', 'for-4.10/upstream' and 'for-4.10/wacom/generic' into for-linus

HID: fix missing irq field

commit ba18a9314a94 ("Revert "HID: i2c-hid: Add support for ACPI GPIO
interrupts"") removed the need for storing the irq in struct i2c_hid.

But then commit de3c99488609 ("HID: i2c-hid: Disable IRQ before freeing
buffers") forgot to update the location of the irq.

Fix this by using the actual I2C client irq.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: i2c-hid: fix build

Add a forgotten include that I've by mistake omitted when resolving
merge conflict in ead0687fe30 ("HID: i2c-hid: support regulator power
on/off").

Fixes: ead0687fe30 ("HID: i2c-hid: support regulator power on/off")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: i2c-hid: Disable IRQ before freeing buffers

The HID report buffers that are initially allocated on i2c_hid_probe()
might not be big enough to hold the HID reports from a specific device,
in which case they will be freed and new ones will be allocated in
i2c_hid_start(), at point which the device's report size is known. But
at this point ihid->irq is already running, and may call
i2c_hid_get_input() which passes ihid->inbuf to i2c_master_recv(). Since
this handler runs in a separate thread, ihid->inbuf may be freed at this
very moment, and i2c_master_recv() will write on memory which may be
already owned by a different part of the kernel, corrupting its data.

This problem has been observed on an Asus UX360UA laptop which has an
I2C touchpad, and results in a complete system freeze or an unusable
slowness with a lof of "BUG: unable to handle kernel paging request at
<address>" warnings. Enabling SLUB debugging shows a use-after-free
warning on memory allocated in i2c_hid_alloc_buffers() and freed in
i2c_hid_free_buffers():

=============================================================================
BUG kmalloc-64 (Not tainted): Poison overwritten
-----------------------------------------------------------------------------
Disabling lock debugging due to kernel taint
INFO: 0xffff880264083273-0xffff88026408329e. first byte 0x0 instead of 0x6b
INFO: Allocated in i2c_hid_alloc_buffers+0x25/0xa0 [i2c_hid] age=35793 cpu=2 pid=430
___slab_alloc+0x41e/0x460
__slab_alloc+0x20/0x40
__kmalloc+0x210/0x280
i2c_hid_alloc_buffers+0x25/0xa0 [i2c_hid]
i2c_hid_probe+0x12f/0x5e0 [i2c_hid]
i2c_device_probe+0x10a/0x1b0
driver_probe_device+0x220/0x4a0
__device_attach_driver+0x71/0xa0
bus_for_each_drv+0x67/0xb0
__device_attach+0xdc/0x170
device_initial_probe+0x13/0x20
bus_probe_device+0x92/0xa0
device_add+0x4aa/0x670
device_register+0x1a/0x20
i2c_new_device+0x18e/0x230
acpi_i2c_add_device+0x1a0/0x210
INFO: Freed in i2c_hid_free_buffers+0x16/0x60 [i2c_hid] age=7552 cpu=1 pid=1473
__slab_free+0x221/0x330
kfree+0x139/0x160
i2c_hid_free_buffers+0x16/0x60 [i2c_hid]
i2c_hid_start+0x2a9/0x2df [i2c_hid]
mt_probe+0x160/0x22e [hid_multitouch]
hid_device_probe+0xd7/0x150 [hid]
driver_probe_device+0x220/0x4a0
__driver_attach+0x84/0x90
bus_for_each_dev+0x6c/0xc0
driver_attach+0x1e/0x20
bus_add_driver+0x1c3/0x280
driver_register+0x60/0xe0
__hid_register_driver+0x53/0x90 [hid]
0xffffffffc004f01e
do_one_initcall+0xb3/0x1f0
do_init_module+0x5f/0x1d0
INFO: Slab 0xffffea0009902080 objects=20 used=20 fp=0x          (null) flags=0x17fff8000004080
INFO: Object 0xffff880264083260 @offset=4704 fp=0x          (null)
Bytes b4 ffff880264083250: 8d e6 fe ff 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a  ........ZZZZZZZZ
Object ffff880264083260: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
Object ffff880264083270: 6b 6b 6b 00 00 00 00 00 00 00 00 00 00 00 00 00  kkk.............
Object ffff880264083280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Object ffff880264083290: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Redzone ffff8802640832a0: bb bb bb bb bb bb bb bb                          ........
Padding ffff8802640833e0: 5a 5a 5a 5a 5a 5a 5a 5a                          ZZZZZZZZ
CPU: 1 PID: 1503 Comm: python3 Tainted: G    B           4.4.21+ #10
Hardware name: ASUSTeK COMPUTER INC. UX360UA/UX360UA, BIOS UX360UA.200 05/05/2016
0000000000000086 00000000622d48a2 ffff88026061ba38 ffffffff813f6044
ffff880264082010 ffff880264083260 ffff88026061ba78 ffffffff811e8eab
0000000000000008 ffff880200000001 ffff88026408329f ffff88026a007700
Call Trace:
[<ffffffff813f6044>] dump_stack+0x63/0x8f
[<ffffffff811e8eab>] print_trailer+0x14b/0x1f0
[<ffffffff811e94c1>] check_bytes_and_report+0xc1/0x100
[<ffffffff811e96c4>] check_object+0x1c4/0x240
[<ffffffff81293fde>] ? ext4_htree_store_dirent+0x3e/0x120
[<ffffffff811e9b44>] alloc_debug_processing+0x104/0x180
[<ffffffff811eb7be>] ___slab_alloc+0x41e/0x460
[<ffffffff81293fde>] ? ext4_htree_store_dirent+0x3e/0x120
[<ffffffff8124590b>] ? __getblk_gfp+0x2b/0x60
[<ffffffff8129b969>] ? ext4_getblk+0xa9/0x190
[<ffffffff811eb820>] __slab_alloc+0x20/0x40
[<ffffffff811ed320>] __kmalloc+0x210/0x280
[<ffffffff81293fde>] ? ext4_htree_store_dirent+0x3e/0x120
[<ffffffff812c1602>] ? ext4fs_dirhash+0xc2/0x2a0
[<ffffffff81293fde>] ext4_htree_store_dirent+0x3e/0x120
[<ffffffff812a4f47>] htree_dirblock_to_tree+0x187/0x1b0
[<ffffffff812a5fd2>] ext4_htree_fill_tree+0xb2/0x2e0
[<ffffffff811ebb7a>] ? kmem_cache_alloc_trace+0x1fa/0x220
[<ffffffff81293e45>] ? ext4_readdir+0x775/0x8b0
[<ffffffff81293cb1>] ext4_readdir+0x5e1/0x8b0
[<ffffffff81221c82>] iterate_dir+0x92/0x120
[<ffffffff81222118>] SyS_getdents+0x98/0x110
[<ffffffff81221d10>] ? iterate_dir+0x120/0x120
[<ffffffff818157f2>] entry_SYSCALL_64_fastpath+0x16/0x71
FIX kmalloc-64: Restoring 0xffff880264083273-0xffff88026408329e=0x6b
FIX kmalloc-64: Marking all objects used

Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: usbhid: fix improper return value

Function hid_post_reset() should return negative error codes on failures.
However, in its implementation, it incorrectly returns 1. This patch fixes the
bug, returning proper error codes on failures.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: wacom: generic: Don't sync input on empty input packets

post input_sync only when there are input events posted

Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Reviewed-By: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: wacom: generic: Pad supports more than buttons

Make sure everything reported from pad are registered

Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Reviewed-By: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: wacom: generic: Send data only when the interface is defined

Sometime valid events may not be supported by the driver yet. Make
sure we don't process them when the code is not ready.

This fix prevents a kernel panic due to unsupported HID events.

Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Reviewed-By: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: wacom: generic: Don't return a value for wacom_wac_event

It is unnecessary to return a value since nothing is expecting a
value from it.

Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Reviewed-By: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: intel_ish-hid: use %pUL for uuid formatting

We have the %pU printf extension for doing exactly this. Saves some
.text, and is likely also a little faster.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: cp2112: explicitly require irqchip support in gpiolib

Since the gpio-as-irq support has been added, the driver now depends
on proper support being available in gpiolib.

Fixes: 13de9cca514e ("HID: cp2112: add IRQ chip handling")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: asus: Add i2c touchpad support

Update the hid-asus module to add multitouch support for the Asus i2c touchpad.

This patch aims to resolve the issue raised here:
https://bugzilla.kernel.org/show_bug.cgi?id=120181

The issue is in relation to an Asus touchpad device which currently does not
have multitouch support.

The device currently falls through to the hid-generic driver which
treats the device as a mouse.

This patch aims to add the multitouch support.

[jkosina@suse.cz: move most of the 'patch comment' into actual changelog]
[jkosina@suse.cz: drop hunk that changes ->name of the driver]
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Brendan McGrath <redmcg@redmandi.dyndns.org>
Signed-off-by: Victor Vlasenko <victor.vlasenko@sysgears.com>
Signed-off-by: Frederik Wenigwieser <frederik.wenigwieser@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: intel-ish-hid: Fix potential race condition

Although unlikely but it is possible that when a connect or disconnect
request is issued to the firmware, before the response comes, user
terminates the client session. In this case when the response is arrived
there is no matching client instance in the list of currently active
clients. In this case, don't issue call to wake up a waiting client.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: sony: Support DS4 dongle

Add support for USB based DS4 dongle device, which allows connecting
a DS4 through Bluetooth, but hides Bluetooth from the host system.

Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: sony: Comply to Linux gamepad spec for DS4

The DS4 side of hid-sony used the hid-core layer to assign buttons
and axes based on the HID report descriptors. The default mapping
was strange e.g. right stick using ABS_Z/ABS_RZ or the physical
'south button' being reported as BTN_EAST etcetera.

This patch makes the DS4 side ofi the hid-sony driver comply to
the Linux game controller spec as suggested in a discussion with
Dmitry on the linux-input list.

Currently the main user of the DS4 is the SDL2 library, which has
a mapping table using vendor/device/version as a key. In order to
not break SDL2 we discussed adjusting the version number, so it
can have both mappings. This was discust on linux-input and we
discussed privately with SDL2 developers.

Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: sony: Make the DS4 touchpad a separate device

The dualshock 4 supports both analog sticks of which one uses
ABS_X/_Y and a touchpad. In a recent discussion with Dmitry about
some input-mt changes we proposed for disabling pointer emulation from
input_mt_sync_frame, Dmitry mentioned ABS_X/_Y should report the
same data as ABS_MT_POSITION_X/_Y. The current driver is mixing axes
for different subdevices. It was suggested to make the touchpad
its own sub-device.

This patch turns the touchpad into its own device. In addition
this patch also moves the button underneath the touchpad into
the new device. It felt like this button should be part of the
device. No known user space application (not even SDL2) seems to
be using it.

Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: sony: Fix memory issue when connecting device using both Bluetooth and USB

A previous patch moved most input initialization from sony_probe to
sony_input_configured to avoid some race conditions. The driver has some
special logic to prevent the device to get registered twice in case the
user connects it both over Bluetooth and USB. When this condition
happens sony_input_configured returns a failure, but sony_probe continues
as hid_hw_start doesn't fail. As was discussed on linux-input, it is
acceptable for this function to fail.

This patch adds a check for the HID_CLAIMED_INPUT flag within sony_probe
to determine whether initialization succeeded correctly. The flag is
not set by the HID layer when sony_input_configured fails.

Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: cp2112: add IRQ chip handling

The GPIO part doesn't provide interrupts when GPIO are toggled.
So use a polling mechanism if someone requests a GPIO as an IRQ.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: i2c-hid: force the IRQ level trigger only when not set

Instead of forcing the level trigger of the IRQ, we can count
on ACPI or OF to set it up for us.

The first release of the HID over I2C specification mentioned
that the level trigger needed to be active low. In the latest
version of the specification, there is no such explicit mention,
so it's better to not assume one.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: multitouch: do not retrieve all reports for all devices

We already have in place a quirk for Windows 8 devices, but it looks
like the Surface Cover are not conforming to it.
Given that we are only interested in 3 feature reports (the ones that
the Windows driver retrieves), we should be safe to unconditionally apply
the quirk to everybody.

In case there is an issue with a controller, we can always mark it as such
in the transport driver, and hid-multitouch won't try to retrieve the
feature report.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: multitouch: enable the Surface 3 Type Cover to report multitouch data

There is no reasons to filter out keyboard and consumer control collections
in hid-multitouch.
With the previous hid-input fix, there is now a full support of the Type
Cover and we can remove all specific bits from hid-core and hid-microsoft.

hid-multitouch will automatically set HID_QUIRK_NO_INIT_REPORTS so we can
also remove it from the list of ushbid quirks.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: input: rework HID_QUIRK_MULTI_INPUT

The purpose of HID_QUIRK_MULTI_INPUT is to have an input device per
report id. This is useful when the HID device presents several HID
collections of different device types.

The current implementation of hid-input creates one input node per id per
type (input or output). This is problematic for the LEDs of a keyboard as
they are often set through an output report. The current code creates
one input node with all the keyboard keys, and one other with only the
LEDs.

To solve this, we use a two-passes way:
- first, we initialize all input nodes and associate one per report id
- then, we register all the input nodes

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: multitouch: handle external buttons for Precision Touchpads

According to https://msdn.microsoft.com/en-us/library/windows/hardware/mt604195(v=vs.85).aspx
external buttons have some weird usage mapping:
- Button 2 Indicates Button State for external button for primary
(default left) clicking.
- Button 3 Indicates Button State for external button for secondary
(default right) clicking.

So in the current state, the buttons are mapped to right and middle.
Move the usage by one to correctly map the external buttons.

Tested-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: sensor-hub: add quirk for Microchip MM7150

One more device requiring a quirk :/

Reported-by: Christian-Nils Boda <christian-nils.boda@gadz.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: sensor-hub add quirk for Microsoft Surface 3

One more device requiring a quirk :/

[jkosina@suse.cz: update comment based on Bastien's remark]
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/hid

Pull HID fixes from Jiri Kosina:

- DMA-on-stack fixes for a couple drivers, from Benjamin Tissoires

- small memory sanitization fix for sensor-hub driver, from Song
   Hongyan

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: hid-sensor-hub: clear memory to avoid random data
  HID: rmi: make transfer buffers DMA capable
  HID: magicmouse: make transfer buffers DMA capable
  HID: lg: make transfer buffers DMA capable
  HID: cp2112: make transfer buffers DMA capable

init: use pr_cont() when displaying rotator during ramdisk loading.

Otherwise each individual rotator char would be printed in a new line:

(...)
[    0.642350] -
[    0.644374] |
[    0.646367] -
(...)

Signed-off-by: Nicolas Schichan <nicolas.schichan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'nfs-for-4.9-4' of git://git.linux-nfs.org/projects/anna/linux-nfs

Pull NFS client bugfixes from Anna Schumaker:
"Most of these fix regressions or races, but there is one patch for
  stable that Arnd sent me

  Stable bugfix:
   - Hide array-bounds warning

  Bugfixes:
   - Keep a reference on lock states while checking
   - Handle NFS4ERR_OLD_STATEID in nfs4_reclaim_open_state
   - Don't call close if the open stateid has already been cleared
   - Fix CLOSE rases with OPEN
   - Fix a regression in DELEGRETURN"

* tag 'nfs-for-4.9-4' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  NFSv4.x: hide array-bounds warning
  NFSv4.1: Keep a reference on lock states while checking
  NFSv4.1: Handle NFS4ERR_OLD_STATEID in nfs4_reclaim_open_state
  NFSv4: Don't call close if the open stateid has already been cleared
  NFSv4: Fix CLOSE races with OPEN
  NFSv4.1: Fix a regression in DELEGRETURN

Merge branch 'stable' of git://git./linux/kernel/git/cmetcalf/linux-tile

Pull arch/tile bugfix from Chris Metcalf:
"This fixes a bug that causes reboots after 208 days of uptime :-)"

* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
tile: avoid using clocksource_cyc2ns with absolute cycle count

tile: avoid using clocksource_cyc2ns with absolute cycle count

For large values of "mult" and long uptimes, the intermediate
result of "cycles * mult" can overflow 64 bits.  For example,
the tile platform calls clocksource_cyc2ns with a 1.2 GHz clock;
we have mult = 853, and after 208.5 days, we overflow 64 bits.

Since clocksource_cyc2ns() is intended to be used for relative
cycle counts, not absolute cycle counts, performance is more
importance than accepting a wider range of cycle values.  So,
just use mult_frac() directly in tile's sched_clock().

Commit 4cecf6d401a0 ("sched, x86: Avoid unnecessary overflow
in sched_clock") by Salman Qazi results in essentially the same
generated code for x86 as this change does for tile.  In fact,
a follow-on change by Salman introduced mult_frac() and switched
to using it, so the C code was largely identical at that point too.

Peter Zijlstra then added mul_u64_u32_shr() and switched x86
to use it.  This is, in principle, better; by optimizing the
64x64->64 multiplies to be 32x32->64 multiplies we can potentially
save some time.  However, the compiler piplines the 64x64->64
multiplies pretty well, and the conditional branch in the generic
mul_u64_u32_shr() causes some bubbles in execution, with the
result that it's pretty much a wash.  If tilegx provided its own
implementation of mul_u64_u32_shr() without the conditional branch,
we could potentially save 3 cycles, but that seems like small gain
for a fair amount of additional build scaffolding; no other platform
currently provides a mul_u64_u32_shr() override, and tile doesn't
currently have an <asm/div64.h> header to put the override in.

Additionally, gcc currently has an optimization bug that prevents
it from recognizing the opportunity to use a 32x32->64 multiply,
and so the result would be no better than the existing mult_frac()
until such time as the compiler is fixed.

For now, just using mult_frac() seems like the right answer.

Cc: stable@kernel.org [v3.4+]
Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com>

HID: hid-sensor-hub: clear memory to avoid random data

When user tried to read some fields like hysteresis from IIO sysfs on some
systems, it fails. The reason is that this field is a byte field and caller
of sensor_hub_get_feature() passes a buffer of 4 bytes. Here the function
sensor_hub_get_feature() copies the single byte from the report to the
caller buffer and returns "1" as the number of bytes copied. So caller
can use the return value.

But this is done by multiple callers, so if we just change the
sensor_hub_get_feature so that caller buffer is initialized with 0s
then we don't to change all functions.

Signed-off-by: Song Hongyan <hongyan.song@intel.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: microsoft: Add Surface 4 type cover pro 4 not JP versions

Adding support for not JP versions of the Microsoft Surface 4 Type Cover Pro

[jkosina@suse.cz: The identical patch has been sent by Jeff Farthing, so I am
including his signoff as well]

Signed-off-by: Jeff Farthing <jeff@jfarthing.com>
Signed-off-by: Daniel Keller <daniel.keller@gcd.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: rmi: make transfer buffers DMA capable

Kernel v4.9 strictly enforces DMA capable buffers, so we need to remove
buffers allocated on the stack.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: magicmouse: make transfer buffers DMA capable

Kernel v4.9 strictly enforces DMA capable buffers, so we need to remove
buffers allocated on the stack.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: lg: make transfer buffers DMA capable

Kernel v4.9 strictly enforces DMA capable buffers, so we need to remove
buffers allocated on the stack.

[jkosina@suse.cz: fix up second usage of hid_hw_raw_request(), spotted by
0day build bot]
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: cp2112: make transfer buffers DMA capable

Kernel v4.9 strictly enforces DMA capable buffers, so we need to remove
buffers allocated on the stack.

Use a spinlock to prevent concurrent accesses to the buffer.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Ingo Molnar:
"Six fixes for bugs that were found via fuzzing, and a trivial
  hw-enablement patch for AMD Family-17h CPU PMUs"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/uncore: Allow only a single PMU/box within an events group
  perf/x86/intel: Cure bogus unwind from PEBS entries
  perf/x86: Restore TASK_SIZE check on frame pointer
  perf/core: Fix address filter parser
  perf/x86: Add perf support for AMD family-17h processors
  perf/x86/uncore: Fix crash by removing bogus event_list[] handling for SNB client uncore IMC
  perf/core: Do not set cpuctx->cgrp for unscheduled cgroups

Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6

Pull crypto fixes from Herbert Xu:
"The last push broke algif_hash for all shash implementations, so this
  is a follow-up to fix that.

  This also fixes a problem in the crypto scatterwalk that triggers a
  BUG_ON with certain debugging options due to the new vmalloced-stack
  code"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: scatterwalk - Remove unnecessary aliasing check in map_and_copy
  crypto: algif_hash - Fix result clobbering in recvmsg

Merge branch 'for-rc' of git://git./linux/kernel/git/rzhang/linux

Pull thermal management fix from Zhang Rui:
"We only have one urgent fix this time.

  Commit 3105f234e0ab ("thermal/powerclamp: correct cpu support check"),
  which is shipped in 4.9-rc3, fixed a problem introduced by commit
  b721ca0d1927 ("thermal/powerclamp: remove cpu whitelist").

  But unfortunately, it broke intel_powerclamp driver module auto-
  loading at the same time. Thus we need this change to add back module
  auto-loading for 4.9"

* 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  thermal/powerclamp: add back module device table

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
"Two small fixes.

  One prevents timeouts on mpt3sas when trying to use the secure erase
  protocol which causes the erase protocol to be aborted. The second is
  a regression in a prior fix which causes all commands to abort during
  PCI extended error recovery, which is incorrect because PCI EEH is
  independent from what's happening on the FC transport"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qla2xxx: do not abort all commands in the adapter during EEH recovery
  scsi: mpt3sas: Fix secure erase premature termination

Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux

Pull clk fixes from Stephen Boyd:
"A handful of driver fixes.

  The sunxi fixes are for an incorrect clk tree configuration and a bad
  frequency calculation. The other two are fixes for passing the wrong
  pointer in drivers recently converted to clk_hw style registration"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: efm32gg: Pass correct type to hw provider registration
  clk: berlin: Pass correct type to hw provider registration
  clk: sunxi: Fix M factor computation for APB1
  clk: sunxi-ng: sun6i-a31: Force AHB1 clock to use PLL6 as parent

NFSv4.x: hide array-bounds warning

A correct bugfix introduced a harmless warning that shows up with gcc-7:

fs/nfs/callback.c: In function 'nfs_callback_up':
fs/nfs/callback.c:214:14: error: array subscript is outside array bounds [-Werror=array-bounds]

What happens here is that the 'minorversion == 0' check tells the
compiler that we assume minorversion can be something other than 0,
but when CONFIG_NFS_V4_1 is disabled that would be invalid and
result in an out-of-bounds access.

The added check for IS_ENABLED(CONFIG_NFS_V4_1) tells gcc that this
really can't happen, which makes the code slightly smaller and also
avoids the warning.

The bugfix that introduced the warning is marked for stable backports,
we want this one backported to the same releases.

Fixes: 98b0f80c2396 ("NFSv4.x: Fix a refcount leak in nfs_callback_up_net")
Cc: stable@vger.kernel.org # v3.7+
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull scheduler fixes from Ingo Molnar:
"Two fixes for autogroup scheduling, for races when turning the feature
  on/off via /proc/sys/kernel/sched_autogroup_enabled"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/autogroup: Do not use autogroup->tg in zombie threads
  sched/autogroup: Fix autogroup_move_group() to never skip sched_move_task()

Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Ingo Molnar:
"Misc fixes:
   - two fixes to make (very) old Intel CPUs boot reliably
   - fix the intel-mid driver and rename it
   - two KASAN false positive fixes
   - an FPU fix
   - two sysfb fixes
   - two build fixes related to new toolchain versions"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/platform/intel-mid: Rename platform_wdt to platform_mrfld_wdt
  x86/build: Build compressed x86 kernels as PIE when !CONFIG_RELOCATABLE as well
  x86/platform/intel-mid: Register watchdog device after SCU
  x86/fpu: Fix invalid FPU ptrace state after execve()
  x86/boot: Fail the boot if !M486 and CPUID is missing
  x86/traps: Ignore high word of regs->cs in early_fixup_exception()
  x86/dumpstack: Prevent KASAN false positive warnings
  x86/unwind: Prevent KASAN false positive warnings in guess unwinder
  x86/boot: Avoid warning for zero-filling .bss
  x86/sysfb: Fix lfb_size calculation
  x86/sysfb: Add support for 64bit EFI lfb_base

perf/x86/intel/uncore: Allow only a single PMU/box within an events group

Group validation expects all events to be of the same PMU; however
is_uncore_pmu() is too wide, it matches _all_ uncore events, even
across PMUs.

This triggers failure when we group different events from different
uncore PMUs, like:

perf stat -vv -e '{uncore_cbox_0/config=0x0334/,uncore_qpi_0/event=1/}' -a sleep 1

Fix is_uncore_pmu() by only matching events to the box at hand.

Note that generic code; ran after this step; will disallow this
mixture of PMU events.

Reported-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vince@deater.net>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/20161118125354.GQ3117@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86/intel: Cure bogus unwind from PEBS entries

Vince Weaver reported that perf_fuzzer + KASAN detects that PEBS event
unwinds sometimes do 'weird' things. In particular, we seemed to be
ending up unwinding from random places on the NMI stack.

While it was somewhat expected that the event record BP,SP would not
match the interrupt BP,SP in that the interrupt is strictly later than
the record event, it was overlooked that it could be on an already
overwritten stack.

Therefore, don't copy the recorded BP,SP over the interrupted BP,SP
when we need stack unwinds.

Note that its still possible the unwind doesn't full match the actual
event, as its entirely possible to have done an (I)RET between record
and interrupt, but on average it should still point in the general
direction of where the event came from. Also, it's the best we can do,
considering.

The particular scenario that triggered the bogus NMI stack unwind was
a PEBS event with very short period, upon enabling the event at the
tail of the PMI handler (FREEZE_ON_PMI is not used), it instantly
triggers a record (while still on the NMI stack) which in turn
triggers the next PMI. This then causes back-to-back NMIs and we'll
try and unwind the stack-frame from the last NMI, which obviously is
now overwritten by our own.

Analyzed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: davej@codemonkey.org.uk <davej@codemonkey.org.uk>
Cc: dvyukov@google.com <dvyukov@google.com>
Cc: stable@vger.kernel.org
Fixes: ca037701a025 ("perf, x86: Add PEBS infrastructure")
Link: http://lkml.kernel.org/r/20161117171731.GV3157@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86: Restore TASK_SIZE check on frame pointer

The following commit:

  75925e1ad7f5 ("perf/x86: Optimize stack walk user accesses")

... switched from copy_from_user_nmi() to __copy_from_user_nmi() with a manual
access_ok() check.

Unfortunately, copy_from_user_nmi() does an explicit check against TASK_SIZE,
whereas the access_ok() uses whatever the current address limit of the task is.

We are getting NMIs when __probe_kernel_read() has switched to KERNEL_DS, and
then see vmalloc faults when we access what looks like pointers into vmalloc
space:

  [] WARNING: CPU: 3 PID: 3685731 at arch/x86/mm/fault.c:435 vmalloc_fault+0x289/0x290
  [] CPU: 3 PID: 3685731 Comm: sh Tainted: G        W       4.6.0-5_fbk1_223_gdbf0f40 #1
  [] Call Trace:
  []  <NMI>  [<ffffffff814717d1>] dump_stack+0x4d/0x6c
  []  [<ffffffff81076e43>] __warn+0xd3/0xf0
  []  [<ffffffff81076f2d>] warn_slowpath_null+0x1d/0x20
  []  [<ffffffff8104a899>] vmalloc_fault+0x289/0x290
  []  [<ffffffff8104b5a0>] __do_page_fault+0x330/0x490
  []  [<ffffffff8104b70c>] do_page_fault+0xc/0x10
  []  [<ffffffff81794e82>] page_fault+0x22/0x30
  []  [<ffffffff81006280>] ? perf_callchain_user+0x100/0x2a0
  []  [<ffffffff8115124f>] get_perf_callchain+0x17f/0x190
  []  [<ffffffff811512c7>] perf_callchain+0x67/0x80
  []  [<ffffffff8114e750>] perf_prepare_sample+0x2a0/0x370
  []  [<ffffffff8114e840>] perf_event_output+0x20/0x60
  []  [<ffffffff8114aee7>] ? perf_event_update_userpage+0xc7/0x130
  []  [<ffffffff8114ea01>] __perf_event_overflow+0x181/0x1d0
  []  [<ffffffff8114f484>] perf_event_overflow+0x14/0x20
  []  [<ffffffff8100a6e3>] intel_pmu_handle_irq+0x1d3/0x490
  []  [<ffffffff8147daf7>] ? copy_user_enhanced_fast_string+0x7/0x10
  []  [<ffffffff81197191>] ? vunmap_page_range+0x1a1/0x2f0
  []  [<ffffffff811972f1>] ? unmap_kernel_range_noflush+0x11/0x20
  []  [<ffffffff814f2056>] ? ghes_copy_tofrom_phys+0x116/0x1f0
  []  [<ffffffff81040d1d>] ? x2apic_send_IPI_self+0x1d/0x20
  []  [<ffffffff8100411d>] perf_event_nmi_handler+0x2d/0x50
  []  [<ffffffff8101ea31>] nmi_handle+0x61/0x110
  []  [<ffffffff8101ef94>] default_do_nmi+0x44/0x110
  []  [<ffffffff8101f13b>] do_nmi+0xdb/0x150
  []  [<ffffffff81795187>] end_repeat_nmi+0x1a/0x1e
  []  [<ffffffff8147daf7>] ? copy_user_enhanced_fast_string+0x7/0x10
  []  [<ffffffff8147daf7>] ? copy_user_enhanced_fast_string+0x7/0x10
  []  [<ffffffff8147daf7>] ? copy_user_enhanced_fast_string+0x7/0x10
  []  <<EOE>>  <IRQ>  [<ffffffff8115d05e>] ? __probe_kernel_read+0x3e/0xa0

Fix this by moving the valid_user_frame() check to before the uaccess
that loads the return address and the pointer to the next frame.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-kernel@vger.kernel.org
Fixes: 75925e1ad7f5 ("perf/x86: Optimize stack walk user accesses")
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/autogroup: Do not use autogroup->tg in zombie threads

Exactly because for_each_thread() in autogroup_move_group() can't see it
and update its ->sched_task_group before _put() and possibly free().

So the exiting task needs another sched_move_task() before exit_notify()
and we need to re-introduce the PF_EXITING (or similar) check removed by
the previous change for another reason.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: hartsjc@redhat.com
Cc: vbendel@redhat.com
Cc: vlovejoy@redhat.com
Link: http://lkml.kernel.org/r/20161114184612.GA15968@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/autogroup: Fix autogroup_move_group() to never skip sched_move_task()

The PF_EXITING check in task_wants_autogroup() is no longer needed. Remove
it, but see the next patch.

However the comment is correct in that autogroup_move_group() must always
change task_group() for every thread so the sysctl_ check is very wrong;
we can race with cgroups and even sys_setsid() is not safe because a task
running with task_group() == ag->tg must participate in refcounting:

int main(void)
{
int sctl = open("/proc/sys/kernel/sched_autogroup_enabled", O_WRONLY);

assert(sctl > 0);
if (fork()) {
wait(NULL); // destroy the child's ag/tg
pause();
}

assert(pwrite(sctl, "1\n", 2, 0) == 2);
assert(setsid() > 0);
if (fork())
pause();

kill(getppid(), SIGKILL);
sleep(1);

// The child has gone, the grandchild runs with kref == 1
assert(pwrite(sctl, "0\n", 2, 0) == 2);
assert(setsid() > 0);

// runs with the freed ag/tg
for (;;)
sleep(1);

return 0;
}

crashes the kernel. It doesn't really need sleep(1), it doesn't matter if
autogroup_move_group() actually frees the task_group or this happens later.

Reported-by: Vern Lovejoy <vlovejoy@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: hartsjc@redhat.com
Cc: vbendel@redhat.com
Link: http://lkml.kernel.org/r/20161114184609.GA15965@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

crypto: scatterwalk - Remove unnecessary aliasing check in map_and_copy

The aliasing check in map_and_copy is no longer necessary because
the IPsec ESP code no longer provides an IV that points into the
actual request data. As this check is now triggering BUG checks
due to the vmalloced stack code, I'm removing it.

Reported-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: algif_hash - Fix result clobbering in recvmsg

Recently an init call was added to hash_recvmsg so as to reset
the hash state in case a sendmsg call was never made.

Unfortunately this ended up clobbering the result if the previous
sendmsg was done with a MSG_MORE flag. This patch fixes it by
excluding that case when we make the init call.

Fixes: a8348bca2944 ("algif_hash - Fix NULL hash crash with shash")
Reported-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/linux-security

Pull apparmor bugfix from James Morris:
"This has a fix for a policy replacement bug that is fairly serious for
  apache mod_apparmor users, as it results in the wrong policy being
  applied on an network facing service"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  apparmor: fix change_hat not finding hat after policy replacement

Merge git://git./linux/kernel/git/davem/sparc

Pull sparc fixes from David Miller:

1) With modern networking cards we can run out of 32-bit DMA space, so
    support 64-bit DMA addressing when possible on sparc64. From Dave
    Tushar.

2) Some signal frame validation checks are inverted on sparc32, fix
    from Andreas Larsson.

3) Lockdep tables can get too large in some circumstances on sparc64,
    add a way to adjust the size a bit. From Babu Moger.

4) Fix NUMA node probing on some sun4v systems, from Thomas Tai.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: drop duplicate header scatterlist.h
  lockdep: Limit static allocations if PROVE_LOCKING_SMALL is defined
  config: Adding the new config parameter CONFIG_PROVE_LOCKING_SMALL for sparc
  sunbmac: Fix compiler warning
  sunqe: Fix compiler warnings
  sparc64: Enable 64-bit DMA
  sparc64: Enable sun4v dma ops to use IOMMU v2 APIs
  sparc64: Bind PCIe devices to use IOMMU v2 service
  sparc64: Initialize iommu_map_table and iommu_pool
  sparc64: Add ATU (new IOMMU) support
  sparc64: Add FORCE_MAX_ZONEORDER and default to 13
  sparc64: fix compile warning section mismatch in find_node()
  sparc32: Fix inverted invalid_frame_pointer checks on sigreturns
  sparc64: Fix find_node warning if numa node cannot be found

Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

1) Clear congestion control state when changing algorithms on an
    existing socket, from Florian Westphal.

2) Fix register bit values in altr_tse_pcs portion of stmmac driver,
    from Jia Jie Ho.

3) Fix PTP handling in stammc driver for GMAC4, from Giuseppe
    CAVALLARO.

4) Fix udplite multicast delivery handling, it ignores the udp_table
    parameter passed into the lookups, from Pablo Neira Ayuso.

5) Synchronize the space estimated by rtnl_vfinfo_size and the space
    actually used by rtnl_fill_vfinfo. From Sabrina Dubroca.

6) Fix memory leak in fib_info when splitting nodes, from Alexander
    Duyck.

7) If a driver does a napi_hash_del() explicitily and not via
    netif_napi_del(), it must perform RCU synchronization as needed. Fix
    this in virtio-net and bnxt drivers, from Eric Dumazet.

8) Likewise, it is not necessary to invoke napi_hash_del() is we are
    also doing neif_napi_del() in the same code path. Remove such calls
    from be2net and cxgb4 drivers, also from Eric Dumazet.

9) Don't allocate an ID in peernet2id_alloc() if the netns is dead,
    from WANG Cong.

10) Fix OF node and device struct leaks in of_mdio, from Johan Hovold.

11) We cannot cache routes in ip6_tunnel when using inherited traffic
    classes, from Paolo Abeni.

12) Fix several crashes and leaks in cpsw driver, from Johan Hovold.

13) Splice operations cannot use freezable blocking calls in AF_UNIX,
    from WANG Cong.

14) Link dump filtering by master device and kind support added an error
    in loop index updates during the dump if we actually do filter, fix
    from Zhang Shengju.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (59 commits)
  tcp: zero ca_priv area when switching cc algorithms
  net: l2tp: Treat NET_XMIT_CN as success in l2tp_eth_dev_xmit
  ethernet: stmmac: make DWMAC_STM32 depend on it's associated SoC
  tipc: eliminate obsolete socket locking policy description
  rtnl: fix the loop index update error in rtnl_dump_ifinfo()
  l2tp: fix racy SOCK_ZAPPED flag check in l2tp_ip{,6}_bind()
  net: macb: add check for dma mapping error in start_xmit()
  rtnetlink: fix FDB size computation
  netns: fix get_net_ns_by_fd(int pid) typo
  af_unix: conditionally use freezable blocking calls in read
  net: ethernet: ti: cpsw: fix fixed-link phy probe deferral
  net: ethernet: ti: cpsw: add missing sanity check
  net: ethernet: ti: cpsw: fix secondary-emac probe error path
  net: ethernet: ti: cpsw: fix of_node and phydev leaks
  net: ethernet: ti: cpsw: fix deferred probe
  net: ethernet: ti: cpsw: fix mdio device reference leak
  net: ethernet: ti: cpsw: fix bad register access in probe error path
  net: sky2: Fix shutdown crash
  cfg80211: limit scan results cache size
  net sched filters: pass netlink message flags in event notification
  ...

tcp: zero ca_priv area when switching cc algorithms

We need to zero out the private data area when application switches
connection to different algorithm (TCP_CONGESTION setsockopt).

When congestion ops get assigned at connect time everything is already
zeroed because sk_alloc uses GFP_ZERO flag. But in the setsockopt case
this contains whatever previous cc placed there.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: l2tp: Treat NET_XMIT_CN as success in l2tp_eth_dev_xmit

The tc could return NET_XMIT_CN as one congestion notification, but
it does not mean the packe is lost. Other modules like ipvlan,
macvlan, and others treat NET_XMIT_CN as success too.
So l2tp_eth_dev_xmit should add the NET_XMIT_CN check.

Signed-off-by: Gao Feng <gfree.wind@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

NFSv4.1: Keep a reference on lock states while checking

While walking the list of lock_states, keep a reference on each
nfs4_lock_state to be checked, otherwise the lock state could be removed
while the check performs TEST_STATEID and possible FREE_STATEID.

Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

ethernet: stmmac: make DWMAC_STM32 depend on it's associated SoC

There's not much point, except compile test, enabling the stmmac
platform drivers unless the STM32 SoC is enabled. It's not
useful without it.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

thermal/powerclamp: add back module device table

Commit 3105f234e0aba43e44e277c20f9b32ee8add43d4 replaced module
cpu id table with a cpu feature check, which is logically correct.
But we need the module device table to allow module auto loading.

Cc: stable@vger.kernel.org # 4.8
Fixes:3105f234 thermal/powerclamp: correct cpu support check
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

perf/core: Fix address filter parser

The token table passed into match_token() must be null-terminated, which
it currently is not in the perf's address filter string parser, as caught
by Vince's perf_fuzzer and KASAN.

It doesn't blow up otherwise because of the alignment padding of the table
to the next element in the .rodata, which is luck.

Fixing by adding a null-terminator to the token table.

Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Tested-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dvyukov@google.com
Cc: stable@vger.kernel.org # v4.7+
Fixes: 375637bc524 ("perf/core: Introduce address range filtering")
Link: http://lkml.kernel.org/r/877f81f264.fsf@ashishki-desk.ger.corp.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

x86/platform/intel-mid: Rename platform_wdt to platform_mrfld_wdt

Rename the watchdog platform library file to explicitly show that is used only
on Intel Merrifield platforms.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20161118172723.179761-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

x86/build: Build compressed x86 kernels as PIE when !CONFIG_RELOCATABLE as well

Since the bootloader may load the compressed x86 kernel at any address,
it should always be built as PIE, not just when CONFIG_RELOCATABLE=y.

Otherwise, linker in binutils 2.27 will optimize GOT load into the
absolute address when building the compressed x86 kernel as a non-PIE
executable.

Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
[ Small wording changes. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>

x86/platform/intel-mid: Register watchdog device after SCU

Watchdog device in Intel Tangier relies on SCU to be present. It uses the SCU
IPC channel to send commands and receive responses. If watchdog driver is
initialized quite before SCU and a command has been sent the result is always
an error like the following:

intel_mid_wdt: Error stopping watchdog: 0xffffffed

Register watchdog device whne SCU is ready to avoid described issue.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20161118165224.175514-1-andriy.shevchenko@linux.intel.com
[ Small cleanups. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>

x86/fpu: Fix invalid FPU ptrace state after execve()

Robert O'Callahan reported that after an execve PTRACE_GETREGSET
NT_X86_XSTATE continues to return the pre-exec register values
until the exec'ed task modifies FPU state.

The test code is at:

https://bugzilla.redhat.com/attachment.cgi?id=1164286.

What is happening is fpu__clear() does not properly clear fpstate.
Fix it by doing just that.

Reported-by: Robert O'Callahan <robert@ocallahan.org>
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Cc: <stable@vger.kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi V. Shankar <ravi.v.shankar@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1479402695-6553-1-git-send-email-yu-cheng.yu@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

x86/boot: Fail the boot if !M486 and CPUID is missing

Linux will have all kinds of sporadic problems on systems that don't
have the CPUID instruction unless CONFIG_M486=y.  In particular,
sync_core() will explode.

I believe that these kernels had a better chance of working before
commit 05fb3c199bb0 ("x86/boot: Initialize FPU and X86_FEATURE_ALWAYS
even if we don't have CPUID").  That commit inadvertently fixed a
serious bug: we used to fail to detect the FPU if CPUID wasn't
present.  Because we also used to forget to set X86_FEATURE_ALWAYS, we
end up with no cpu feature bits set at all.  This meant that
alternative patching didn't do anything and, if paravirt was disabled,
we could plausibly finish the entire boot process without calling
sync_core().

Rather than trying to work around these issues, just have the kernel
fail loudly if it's running on a CPUID-less 486, doesn't have CPUID,
and doesn't have CONFIG_M486 set.

Reported-by: Matthew Whitehead <tedheadster@gmail.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/70eac6639f23df8be5fe03fa1984aedd5d40077a.1479598603.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

x86/traps: Ignore high word of regs->cs in early_fixup_exception()

On the 80486 DX, it seems that some exceptions may leave garbage in
the high bits of CS.  This causes sporadic failures in which
early_fixup_exception() refuses to fix up an exception.

As far as I can tell, this has been buggy for a long time, but the
problem seems to have been exacerbated by commits:

  1e02ce4cccdc ("x86: Store a per-cpu shadow copy of CR4")
  e1bfc11c5a6f ("x86/init: Fix cr4_init_shadow() on CR4-less machines")

This appears to have broken for as long as we've had early
exception handling.

[ Note to stable maintainers: This patch is needed all the way back to 3.4,
  but it will only apply to 4.6 and up, as it depends on commit:

    0e861fbb5bda ("x86/head: Move early exception panic code into early_fixup_exception()")

  If you want to backport to kernels before 4.6, please don't backport the
  prerequisites (there was a big chain of them that rewrote a lot of the
  early exception machinery); instead, ask me and I can send you a one-liner
  that will apply. ]

Reported-by: Matthew Whitehead <tedheadster@gmail.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Fixes: 4c5023a3fa2e ("x86-32: Handle exception table entries during early boot")
Link: http://lkml.kernel.org/r/cb32c69920e58a1a58e7b5cad975038a69c0ce7d.1479609510.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

apparmor: fix change_hat not finding hat after policy replacement

After a policy replacement, the task cred may be out of date and need
to be updated. However change_hat is using the stale profiles from
the out of date cred resulting in either: a stale profile being applied
or, incorrect failure when searching for a hat profile as it has been
migrated to the new parent profile.

Fixes: 01e2b670aa898a39259bc85c78e3d74820f4d3b6 (failure to find hat)
Fixes: 898127c34ec03291c86f4ff3856d79e9e18952bc (stale policy being applied)
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1000287
Cc: stable@vger.kernel.org
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>

Linux 4.9-rc6

Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM fixes from Russell King:
"A few more ARM fixes:

   - the assembly backtrace code suffers problems with the new printk()
     implementation which assumes that kernel messages without KERN_CONT
     should have newlines inserted between them. Fix this.
   - fix a section naming error - ".init.text" rather than ".text.init"
   - preallocate DMA debug memory at core_initcall() time rather than
     fs_initcall(), as we have some core drivers that need to use DMA
     mapping - and that triggers a kernel warning from the DMA debug
     code.
   - fix XIP kernels after the ro_after_init changes made this data
     permanently read-only"

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: Fix XIP kernels
  ARM: 8628/1: dma-mapping: preallocate DMA-debug hash tables in core_initcall
  ARM: 8624/1: proc-v7m.S: fix init section name
  ARM: fix backtrace

tipc: eliminate obsolete socket locking policy description

The comment block in socket.c describing the locking policy is
obsolete, and does not reflect current reality. We remove it in this
commit.

Since the current locking policy is much simpler and follows a
mainstream approach, we see no need to add a new description.

Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rtnl: fix the loop index update error in rtnl_dump_ifinfo()

If the link is filtered out, loop index should also be updated. If not,
loop index will not be correct.

Fixes: dc599f76c22b0 ("net: Add support for filtering link dump by master device and kind")
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

l2tp: fix racy SOCK_ZAPPED flag check in l2tp_ip{,6}_bind()

Lock socket before checking the SOCK_ZAPPED flag in l2tp_ip6_bind().
Without lock, a concurrent call could modify the socket flags between
the sock_flag(sk, SOCK_ZAPPED) test and the lock_sock() call. This way,
a socket could be inserted twice in l2tp_ip6_bind_table. Releasing it
would then leave a stale pointer there, generating use-after-free
errors when walking through the list or modifying adjacent entries.

BUG: KASAN: use-after-free in l2tp_ip6_close+0x22e/0x290 at addr ffff8800081b0ed8
Write of size 8 by task syz-executor/10987
CPU: 0 PID: 10987 Comm: syz-executor Not tainted 4.8.0+ #39
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014
ffff880031d97838 ffffffff829f835b ffff88001b5a1640 ffff8800081b0ec0
ffff8800081b15a0 ffff8800081b6d20 ffff880031d97860 ffffffff8174d3cc
ffff880031d978f0 ffff8800081b0e80 ffff88001b5a1640 ffff880031d978e0
Call Trace:
[<ffffffff829f835b>] dump_stack+0xb3/0x118 lib/dump_stack.c:15
[<ffffffff8174d3cc>] kasan_object_err+0x1c/0x70 mm/kasan/report.c:156
[<     inline     >] print_address_description mm/kasan/report.c:194
[<ffffffff8174d666>] kasan_report_error+0x1f6/0x4d0 mm/kasan/report.c:283
[<     inline     >] kasan_report mm/kasan/report.c:303
[<ffffffff8174db7e>] __asan_report_store8_noabort+0x3e/0x40 mm/kasan/report.c:329
[<     inline     >] __write_once_size ./include/linux/compiler.h:249
[<     inline     >] __hlist_del ./include/linux/list.h:622
[<     inline     >] hlist_del_init ./include/linux/list.h:637
[<ffffffff8579047e>] l2tp_ip6_close+0x22e/0x290 net/l2tp/l2tp_ip6.c:239
[<ffffffff850b2dfd>] inet_release+0xed/0x1c0 net/ipv4/af_inet.c:415
[<ffffffff851dc5a0>] inet6_release+0x50/0x70 net/ipv6/af_inet6.c:422
[<ffffffff84c4581d>] sock_release+0x8d/0x1d0 net/socket.c:570
[<ffffffff84c45976>] sock_close+0x16/0x20 net/socket.c:1017
[<ffffffff817a108c>] __fput+0x28c/0x780 fs/file_table.c:208
[<ffffffff817a1605>] ____fput+0x15/0x20 fs/file_table.c:244
[<ffffffff813774f9>] task_work_run+0xf9/0x170
[<ffffffff81324aae>] do_exit+0x85e/0x2a00
[<ffffffff81326dc8>] do_group_exit+0x108/0x330
[<ffffffff81348cf7>] get_signal+0x617/0x17a0 kernel/signal.c:2307
[<ffffffff811b49af>] do_signal+0x7f/0x18f0
[<ffffffff810039bf>] exit_to_usermode_loop+0xbf/0x150 arch/x86/entry/common.c:156
[<     inline     >] prepare_exit_to_usermode arch/x86/entry/common.c:190
[<ffffffff81006060>] syscall_return_slowpath+0x1a0/0x1e0 arch/x86/entry/common.c:259
[<ffffffff85e4d726>] entry_SYSCALL_64_fastpath+0xc4/0xc6
Object at ffff8800081b0ec0, in cache L2TP/IPv6 size: 1448
Allocated:
PID = 10987
[ 1116.897025] [<ffffffff811ddcb6>] save_stack_trace+0x16/0x20
[ 1116.897025] [<ffffffff8174c736>] save_stack+0x46/0xd0
[ 1116.897025] [<ffffffff8174c9ad>] kasan_kmalloc+0xad/0xe0
[ 1116.897025] [<ffffffff8174cee2>] kasan_slab_alloc+0x12/0x20
[ 1116.897025] [<     inline     >] slab_post_alloc_hook mm/slab.h:417
[ 1116.897025] [<     inline     >] slab_alloc_node mm/slub.c:2708
[ 1116.897025] [<     inline     >] slab_alloc mm/slub.c:2716
[ 1116.897025] [<ffffffff817476a8>] kmem_cache_alloc+0xc8/0x2b0 mm/slub.c:2721
[ 1116.897025] [<ffffffff84c4f6a9>] sk_prot_alloc+0x69/0x2b0 net/core/sock.c:1326
[ 1116.897025] [<ffffffff84c58ac8>] sk_alloc+0x38/0xae0 net/core/sock.c:1388
[ 1116.897025] [<ffffffff851ddf67>] inet6_create+0x2d7/0x1000 net/ipv6/af_inet6.c:182
[ 1116.897025] [<ffffffff84c4af7b>] __sock_create+0x37b/0x640 net/socket.c:1153
[ 1116.897025] [<     inline     >] sock_create net/socket.c:1193
[ 1116.897025] [<     inline     >] SYSC_socket net/socket.c:1223
[ 1116.897025] [<ffffffff84c4b46f>] SyS_socket+0xef/0x1b0 net/socket.c:1203
[ 1116.897025] [<ffffffff85e4d685>] entry_SYSCALL_64_fastpath+0x23/0xc6
Freed:
PID = 10987
[ 1116.897025] [<ffffffff811ddcb6>] save_stack_trace+0x16/0x20
[ 1116.897025] [<ffffffff8174c736>] save_stack+0x46/0xd0
[ 1116.897025] [<ffffffff8174cf61>] kasan_slab_free+0x71/0xb0
[ 1116.897025] [<     inline     >] slab_free_hook mm/slub.c:1352
[ 1116.897025] [<     inline     >] slab_free_freelist_hook mm/slub.c:1374
[ 1116.897025] [<     inline     >] slab_free mm/slub.c:2951
[ 1116.897025] [<ffffffff81748b28>] kmem_cache_free+0xc8/0x330 mm/slub.c:2973
[ 1116.897025] [<     inline     >] sk_prot_free net/core/sock.c:1369
[ 1116.897025] [<ffffffff84c541eb>] __sk_destruct+0x32b/0x4f0 net/core/sock.c:1444
[ 1116.897025] [<ffffffff84c5aca4>] sk_destruct+0x44/0x80 net/core/sock.c:1452
[ 1116.897025] [<ffffffff84c5ad33>] __sk_free+0x53/0x220 net/core/sock.c:1460
[ 1116.897025] [<ffffffff84c5af23>] sk_free+0x23/0x30 net/core/sock.c:1471
[ 1116.897025] [<ffffffff84c5cb6c>] sk_common_release+0x28c/0x3e0 ./include/net/sock.h:1589
[ 1116.897025] [<ffffffff8579044e>] l2tp_ip6_close+0x1fe/0x290 net/l2tp/l2tp_ip6.c:243
[ 1116.897025] [<ffffffff850b2dfd>] inet_release+0xed/0x1c0 net/ipv4/af_inet.c:415
[ 1116.897025] [<ffffffff851dc5a0>] inet6_release+0x50/0x70 net/ipv6/af_inet6.c:422
[ 1116.897025] [<ffffffff84c4581d>] sock_release+0x8d/0x1d0 net/socket.c:570
[ 1116.897025] [<ffffffff84c45976>] sock_close+0x16/0x20 net/socket.c:1017
[ 1116.897025] [<ffffffff817a108c>] __fput+0x28c/0x780 fs/file_table.c:208
[ 1116.897025] [<ffffffff817a1605>] ____fput+0x15/0x20 fs/file_table.c:244
[ 1116.897025] [<ffffffff813774f9>] task_work_run+0xf9/0x170
[ 1116.897025] [<ffffffff81324aae>] do_exit+0x85e/0x2a00
[ 1116.897025] [<ffffffff81326dc8>] do_group_exit+0x108/0x330
[ 1116.897025] [<ffffffff81348cf7>] get_signal+0x617/0x17a0 kernel/signal.c:2307
[ 1116.897025] [<ffffffff811b49af>] do_signal+0x7f/0x18f0
[ 1116.897025] [<ffffffff810039bf>] exit_to_usermode_loop+0xbf/0x150 arch/x86/entry/common.c:156
[ 1116.897025] [<     inline     >] prepare_exit_to_usermode arch/x86/entry/common.c:190
[ 1116.897025] [<ffffffff81006060>] syscall_return_slowpath+0x1a0/0x1e0 arch/x86/entry/common.c:259
[ 1116.897025] [<ffffffff85e4d726>] entry_SYSCALL_64_fastpath+0xc4/0xc6
Memory state around the buggy address:
ffff8800081b0d80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8800081b0e00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff8800081b0e80: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
                                                    ^
ffff8800081b0f00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8800081b0f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

==================================================================

The same issue exists with l2tp_ip_bind() and l2tp_ip_bind_table.

Fixes: c51ce49735c1 ("l2tp: fix oops in L2TP IP sockets for connect() AF_UNSPEC case")
Reported-by: Baozeng Ding <sploving1@gmail.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Baozeng Ding <sploving1@gmail.com>
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'armsoc-fixes' of git://git./linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
"Again a set of smaller fixes across several platforms (OMAP, Marvell,
  Allwinner, i.MX, etc).

  A handful of typo fixes and smaller missing contents from device
  trees, with some tweaks to OMAP mach files to deal with CPU feature
  print misformatting, potential NULL ptr dereference and one setup
  issue with UARTs"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ipmi/bt-bmc: change compatible node to 'aspeed, ast2400-ibt-bmc'
  ARM: dts: STiH410-b2260: Fix typo in spi0 chipselect definition
  ARM: dts: omap5: board-common: fix wrong SMPS6 (VDD-DDR3) voltage
  ARM: omap3: Add missing memory node in SOM-LV
  arm64: dts: marvell: add unique identifiers for Armada A8k SPI controllers
  arm64: dts: marvell: fix clocksource for CP110 slave SPI0
  arm64: dts: marvell: Fix typo in label name on Armada 37xx
  ASoC: omap-abe-twl6040: fix typo in bindings documentation
  dts: omap5: board-common: enable twl6040 headset jack detection
  dts: omap5: board-common: add phandle to reference Palmas gpadc
  ARM: OMAP2+: avoid NULL pointer dereference
  ARM: OMAP2+: PRM: initialize en_uart4_mask and grpsel_uart4_mask
  ARM: dts: omap3: Fix memory node in Torpedo board
  ARM: AM43XX: Select OMAP_INTERCONNECT in Kconfig
  ARM: OMAP3: Fix formatting of features printed
  ARM: dts: imx53-qsb: Fix regulator constraints
  ARM: dts: sun8i: fix the pinmux for UART1

Merge tag 'ext4_for_stable' of git://git./linux/kernel/git/tytso/ext4

Pull ext4 fixes from Ted Ts'o:
"A security fix (so a maliciously corrupted file system image won't
  panic the kernel) and some fixes for CONFIG_VMAP_STACK"

* tag 'ext4_for_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: sanity check the block and cluster size at mount time
  fscrypto: don't use on-stack buffer for key derivation
  fscrypto: don't use on-stack buffer for filename encryption

ext4: sanity check the block and cluster size at mount time

If the block size or cluster size is insane, reject the mount. This
is important for security reasons (although we shouldn't be just
depending on this check).

Ref: http://www.securityfocus.com/archive/1/539661
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1332506
Reported-by: Borislav Petkov <bp@alien8.de>
Reported-by: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org

fscrypto: don't use on-stack buffer for key derivation

With the new (in 4.9) option to use a virtually-mapped stack
(CONFIG_VMAP_STACK), stack buffers cannot be used as input/output for
the scatterlist crypto API because they may not be directly mappable to
struct page. get_crypt_info() was using a stack buffer to hold the
output from the encryption operation used to derive the per-file key.
Fix it by using a heap buffer.

This bug could most easily be observed in a CONFIG_DEBUG_SG kernel
because this allowed the BUG in sg_set_buf() to be triggered.

Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

fscrypto: don't use on-stack buffer for filename encryption

With the new (in 4.9) option to use a virtually-mapped stack
(CONFIG_VMAP_STACK), stack buffers cannot be used as input/output for
the scatterlist crypto API because they may not be directly mappable to
struct page. For short filenames, fname_encrypt() was encrypting a
stack buffer holding the padded filename. Fix it by encrypting the
filename in-place in the output buffer, thereby making the temporary
buffer unnecessary.

This bug could most easily be observed in a CONFIG_DEBUG_SG kernel
because this allowed the BUG in sg_set_buf() to be triggered.

Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
"Some I2C driver bugfixes (and one documentation fix)"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: i2c-mux-pca954x: fix deselect enabling for device-tree
  i2c: digicolor: use clk_disable_unprepare instead of clk_unprepare
  i2c: mux: fix up dependencies
  i2c: Documentation: i2c-topology: fix minor whitespace nit
  i2c: mux: demux-pinctrl: make drivers with no pinctrl work again

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull KVM fixes from Radim Krčmář:
"ARM:
   - Fix handling of the 32bit cycle counter
   - Fix cycle counter filtering

  x86:
   - Fix a race leading to double unregistering of user notifiers
   - Amend oversight in kvm_arch_set_irq that turned Hyper-V code dead
   - Use SRCU around kvm_lapic_set_vapic_addr
   - Avoid recursive flushing of asynchronous page faults
   - Do not rely on deferred update in KVM_GET_CLOCK, which fixes #GP
   - Let userspace know that KVM_GET_CLOCK is useful with master clock;
     4.9 changed the return value to better match the guest clock, but
     didn't provide means to let guests take advantage of it"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  kvm: x86: merge kvm_arch_set_irq and kvm_arch_set_irq_inatomic
  KVM: x86: fix missed SRCU usage in kvm_lapic_set_vapic_addr
  KVM: async_pf: avoid recursive flushing of work items
  kvm: kvmclock: let KVM_GET_CLOCK return whether the master clock is in use
  KVM: Disable irq while unregistering user notifier
  KVM: x86: do not go through vcpu in __get_kvmclock_ns
  KVM: arm64: Fix the issues when guest PMCCFILTR is configured
  arm64: KVM: pmu: Fix AArch32 cycle counter access

i2c: i2c-mux-pca954x: fix deselect enabling for device-tree

Deselect functionality can be ignored for device-trees with
"i2c-mux-idle-disconnect" entries if no platform_data is available.
By enabling the deselect functionality outside the platform_data
block the logic works as it did in previous kernels.

Fixes: 7fcac9807175 ("i2c: i2c-mux-pca954x: convert to use an explicit i2c mux core")
Cc: <stable@vger.kernel.org> # v4.7+
Signed-off-by: Alex Hemme <ahemme@cisco.com>
Signed-off-by: Ziyang Wu <ziywu@cisco.com>
[touched up a few minor issues /peda]
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

Merge tag 'powerpc-4.9-5' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
"Fixes marked for stable:
   - fix system reset interrupt winkle wakeups
   - fix setting of AIL in hypervisor mode

  Fixes for code merged this cycle:
   - fix exception vector build with 2.23 era binutils
   - fix missing update of HID register on secondary CPUs

  Other:
   - fix missing pr_cont()s
   - invalidate ERAT on tlbiel for POWER9 DD1"

* tag 'powerpc-4.9-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/mm: Fix missing update of HID register on secondary CPUs
  powerpc/mm/radix: Invalidate ERAT on tlbiel for POWER9 DD1
  powerpc/64: Fix setting of AIL in hypervisor mode
  powerpc/oops: Fix missing pr_cont()s in instruction dump
  powerpc/oops: Fix missing pr_cont()s in show_regs()
  powerpc/oops: Fix missing pr_cont()s in print_msr_bits() et. al.
  powerpc/oops: Fix missing pr_cont()s in show_stack()
  powerpc: Fix exception vector build with 2.23 era binutils
  powerpc/64s: Fix system reset interrupt winkle wakeups

Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6

Pull crypto fixes from Herbert Xu:
"This fixes the following issues:

   - Compiler warning in caam driver that was the last one remaining

   - Do not register aes-xts in caam drivers on unsupported platforms

   - Regression in algif_hash interface that may lead to an oops"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: algif_hash - Fix NULL hash crash with shash
  crypto: caam - fix type mismatch warning
  crypto: caam - do not register AES-XTS mode on LP units

Merge tag 'leds_4.9-rc6' of git://git./linux/kernel/git/j.anaszewski/linux-leds

Pull LED subsystem update from Jacek Anaszewski:
"I'd like to announce a new co-maintainer - Pavel Machek"

* tag 'leds_4.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
MAINTAINERS: Add LED subsystem co-maintainer

Merge tag 'dmaengine-fix-4.9-rc6' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine fixes from Vinod Koul:
"Some driver fixes which we pending in my tree:

   - return error code fix in edma driver
   - Kconfig fix for genric allocator in mmp_tdma
   - fix uninitialized value in sun6i
   - Runtime pm fixes for cppi"

* tag 'dmaengine-fix-4.9-rc6' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: cppi41: More PM runtime fixes
  dmaengine: cpp41: Fix handling of error path
  dmaengine: cppi41: Fix unpaired pm runtime when only a USB hub is connected
  dmaengine: cppi41: Fix list not empty warning on module removal
  dmaengine: sun6i: fix the uninitialized value for v_lli
  dmaengine: mmp_tdma: add missing select GENERIC_ALLOCATOR in Kconfig
  dmaengine: edma: Fix error return code in edma_alloc_chan_resources()

kvm: x86: merge kvm_arch_set_irq and kvm_arch_set_irq_inatomic

kvm_arch_set_irq is unused since commit b97e6de9c96. Merge
its functionality with kvm_arch_set_irq_inatomic.

Reported-by: Jiang Biao <jiang.biao2@zte.com.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

KVM: x86: fix missed SRCU usage in kvm_lapic_set_vapic_addr

Reported by syzkaller:

    [ INFO: suspicious RCU usage. ]
    4.9.0-rc4+ #47 Not tainted
    -------------------------------
    ./include/linux/kvm_host.h:536 suspicious rcu_dereference_check() usage!

    stack backtrace:
    CPU: 1 PID: 6679 Comm: syz-executor Not tainted 4.9.0-rc4+ #47
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
     ffff880039e2f6d0 ffffffff81c2e46b ffff88003e3a5b40 0000000000000000
     0000000000000001 ffffffff83215600 ffff880039e2f700 ffffffff81334ea9
     ffffc9000730b000 0000000000000004 ffff88003c4f8420 ffff88003d3f8000
    Call Trace:
     [<     inline     >] __dump_stack lib/dump_stack.c:15
     [<ffffffff81c2e46b>] dump_stack+0xb3/0x118 lib/dump_stack.c:51
     [<ffffffff81334ea9>] lockdep_rcu_suspicious+0x139/0x180 kernel/locking/lockdep.c:4445
     [<     inline     >] __kvm_memslots include/linux/kvm_host.h:534
     [<     inline     >] kvm_memslots include/linux/kvm_host.h:541
     [<ffffffff8105d6ae>] kvm_gfn_to_hva_cache_init+0xa1e/0xce0 virt/kvm/kvm_main.c:1941
     [<ffffffff8112685d>] kvm_lapic_set_vapic_addr+0xed/0x140 arch/x86/kvm/lapic.c:2217

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Fixes: fda4e2e85589191b123d31cdc21fd33ee70f50fd
Cc: Andrew Honig <ahonig@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

KVM: async_pf: avoid recursive flushing of work items

This was reported by syzkaller:

    [ INFO: possible recursive locking detected ]
    4.9.0-rc4+ #49 Not tainted
    ---------------------------------------------
    kworker/2:1/5658 is trying to acquire lock:
     ([ 1644.769018] (&work->work)
    [<     inline     >] list_empty include/linux/compiler.h:243
    [<ffffffff8128dd60>] flush_work+0x0/0x660 kernel/workqueue.c:1511

    but task is already holding lock:
     ([ 1644.769018] (&work->work)
    [<ffffffff812916ab>] process_one_work+0x94b/0x1900 kernel/workqueue.c:2093

    stack backtrace:
    CPU: 2 PID: 5658 Comm: kworker/2:1 Not tainted 4.9.0-rc4+ #49
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
    Workqueue: events async_pf_execute
     ffff8800676ff630 ffffffff81c2e46b ffffffff8485b930 ffff88006b1fc480
     0000000000000000 ffffffff8485b930 ffff8800676ff7e0 ffffffff81339b27
     ffff8800676ff7e8 0000000000000046 ffff88006b1fcce8 ffff88006b1fccf0
    Call Trace:
    ...
    [<ffffffff8128ddf3>] flush_work+0x93/0x660 kernel/workqueue.c:2846
    [<ffffffff812954ea>] __cancel_work_timer+0x17a/0x410 kernel/workqueue.c:2916
    [<ffffffff81295797>] cancel_work_sync+0x17/0x20 kernel/workqueue.c:2951
    [<ffffffff81073037>] kvm_clear_async_pf_completion_queue+0xd7/0x400 virt/kvm/async_pf.c:126
    [<     inline     >] kvm_free_vcpus arch/x86/kvm/x86.c:7841
    [<ffffffff810b728d>] kvm_arch_destroy_vm+0x23d/0x620 arch/x86/kvm/x86.c:7946
    [<     inline     >] kvm_destroy_vm virt/kvm/kvm_main.c:731
    [<ffffffff8105914e>] kvm_put_kvm+0x40e/0x790 virt/kvm/kvm_main.c:752
    [<ffffffff81072b3d>] async_pf_execute+0x23d/0x4f0 virt/kvm/async_pf.c:111
    [<ffffffff8129175c>] process_one_work+0x9fc/0x1900 kernel/workqueue.c:2096
    [<ffffffff8129274f>] worker_thread+0xef/0x1480 kernel/workqueue.c:2230
    [<ffffffff812a5a94>] kthread+0x244/0x2d0 kernel/kthread.c:209
    [<ffffffff831f102a>] ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:433

The reason is that kvm_put_kvm is causing the destruction of the VM, but
the page fault is still on the ->queue list.  The ->queue list is owned
by the VCPU, not by the work items, so we cannot just add list_del to
the work item.

Instead, use work->vcpu to note async page faults that have been resolved
and will be processed through the done list.  There is no need to flush
those.

Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

kvm: kvmclock: let KVM_GET_CLOCK return whether the master clock is in use

Userspace can read the exact value of kvmclock by reading the TSC
and fetching the timekeeping parameters out of guest memory. This
however is brittle and not necessary anymore with KVM 4.11. Provide
a mechanism that lets userspace know if the new KVM_GET_CLOCK
semantics are in effect, and---since we are at it---if the clock
is stable across all VCPUs.

Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

KVM: Disable irq while unregistering user notifier

Function user_notifier_unregister should be called only once for each
registered user notifier.

Function kvm_arch_hardware_disable can be executed from an IPI context
which could cause a race condition with a VCPU returning to user mode
and attempting to unregister the notifier.

Signed-off-by: Ignacio Alvarado <ikalvarado@google.com>
Cc: stable@vger.kernel.org
Fixes: 18863bdd60f8 ("KVM: x86 shared msr infrastructure")
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

KVM: x86: do not go through vcpu in __get_kvmclock_ns

Going through the first VCPU is wrong if you follow a KVM_SET_CLOCK with
a KVM_GET_CLOCK immediately after, without letting the VCPU run and
call kvm_guest_time_update.

To fix this, compute the kvmclock value ourselves, using the master
clock (tsc, nsec) pair as the base and the host CPU frequency as
the scale.

Reported-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

Merge tag 'kvm-arm-for-4.9-rc6' of git://git./linux/kernel/git/kvmarm/kvmarm

KVM/ARM updates for v4.9-rc6

- Fix handling of the 32bit cycle counter
- Fix cycle counter filtering

Merge tag 'batadv-net-for-davem-20161119' of git://git.open-mesh.org/linux-merge

Simon Wunderlich says:

====================
Here are two batman-adv bugfix patches:

- Revert a splat on disabling interface which created another problem,
by Sven Eckelmann

- Fix error handling when the primary interface disappears during a
throughput meter test, by Sven Eckelmann
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

sparc: drop duplicate header scatterlist.h

Drop duplicate header scatterlist.h from iommu_common.h.

Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: macb: add check for dma mapping error in start_xmit()

at91ether_start_xmit() does not check for dma mapping errors.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'acpi-4.9-rc6' of git://git./linux/kernel/git/rafael/linux-pm

Pull ACPI fixes from Rafael Wysocki:
"They fix an ACPI thermal management regression introduced by a recent
  FADT handling cleanup, an ACPI tools build issue introduced by a
  recent ACPICA commit and a PCC mailbox initialization bug causing
  lockdep to complain loudly.

  Specifics:

   - Revert a recent ACPICA cleanup that attempted to get rid of all
     FADT version 2 legacy, but broke ACPI thermal management on at
     least one system (Rafael Wysocki).

   - Fix cross-compiled builds of ACPI tools that stopped working after
     a recent cleanup related to the handling of header files in ACPICA
     (Lv Zheng).

   - Fix a locking issue in the PCC channel initialization code that
     invokes devm_request_irq() under a spinlock (among other things)
     and causes lockdep to complain (Hoan Tran)"

* tag 'acpi-4.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  tools/power/acpi: Remove direct kernel source include reference
  mailbox: PCC: Fix lockdep warning when request PCC channel
  Revert "ACPICA: FADT support cleanup"

Merge branch 'rc-fixes' of git://git./linux/kernel/git/mmarek/kbuild

Pull kbuild fixes from Michal Marek:
"Here are some regression fixes for kbuild:

   - modversion support for exported asm symbols (Nick Piggin). The
     affected architectures need separate patches adding
     asm-prototypes.h.

   - fix rebuilds of lib-ksyms.o (Nick Piggin)

   - -fno-PIE builds (Sebastian Siewior and Borislav Petkov). This is
     not a kernel regression, but one of the Debian gcc package.
     Nevertheless, it's quite annoying, so I think it should go into
     mainline and stable now"

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kbuild: Steal gcc's pie from the very beginning
  kbuild: be more careful about matching preprocessed asm ___EXPORT_SYMBOL
  x86/kexec: add -fno-PIE
  scripts/has-stack-protector: add -fno-PIE
  kbuild: add -fno-PIE
  kbuild: modversions for EXPORT_SYMBOL() for asm
  kbuild: prevent lib-ksyms.o rebuilds

Merge tag 'nfsd-4.9-2' of git://linux-nfs.org/~bfields/linux

Pull nfsd bugfix from Bruce Fields:
"Just one fix for an NFS/RDMA crash"

* tag 'nfsd-4.9-2' of git://linux-nfs.org/~bfields/linux:
sunrpc: svc_age_temp_xprts_now should not call setsockopt non-tcp transports

MAINTAINERS: Add LED subsystem co-maintainer

Mark me as a co-maintainer of LED subsystem.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

Merge branches 'acpica-fixes', 'acpi-cppc-fixes' and 'acpi-tools-fixes'

* acpica-fixes:
  Revert "ACPICA: FADT support cleanup"

* acpi-cppc-fixes:
  mailbox: PCC: Fix lockdep warning when request PCC channel

* acpi-tools-fixes:
  tools/power/acpi: Remove direct kernel source include reference

Merge branch 'sparc-lockdep-small'

Babu Moger says:

====================
Adjust lockdep static allocations for sparc

These patches limit the static allocations for lockdep data structures
used for debugging locking correctness. For sparc, all the kernel's code,
data, and bss, must have locked translations in the TLB so that we don't
get TLB misses on kernel code and data. Current sparc chips have 8 TLB
entries available that may be locked down, and with a 4mb page size,
this gives a maximum of 32MB. With PROVE_LOCKING we could go over this
limit and cause system boot-up problems. These patches limit the static
allocations so that everything fits in current required size limit.

patch 1 : Adds new config parameter CONFIG_PROVE_LOCKING_SMALL
Patch 2 : Adjusts the sizes based on the new config parameter

v2-> v3:
   Some more comments from Sam Ravnborg and Peter Zijlstra.
   Defined PROVE_LOCKING_SMALL as invisible and moved the selection to
   arch/sparc/Kconfig.

v1-> v2:
   As suggested by Peter Zijlstra, keeping the default as is.
   Introduced new config variable CONFIG_PROVE_LOCKING_SMALL
   to handle sparc specific case.

v0:
   Initial revision.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>