Anton Eidelman [Thu, 24 Mar 2022 19:05:11 +0000 (13:05 -0600)]
nvme-multipath: fix hang when disk goes live over reconnect
[ Upstream commit
a4a6f3c8f61c3cfbda4998ad94596059ad7e4332 ]
nvme_mpath_init_identify() invoked from nvme_init_identify() fetches a
fresh ANA log from the ctrl. This is essential to have an up to date
path states for both existing namespaces and for those scan_work may
discover once the ctrl is up.
This happens in the following cases:
1) A new ctrl is being connected.
2) An existing ctrl is successfully reconnected.
3) An existing ctrl is being reset.
While in (1) ctrl->namespaces is empty, (2 & 3) may have namespaces, and
nvme_read_ana_log() may call nvme_update_ns_ana_state().
This result in a hang when the ANA state of an existing namespace changes
and makes the disk live: nvme_mpath_set_live() issues IO to the namespace
through the ctrl, which does NOT have IO queues yet.
See sample hang below.
Solution:
- nvme_update_ns_ana_state() to call set_live only if ctrl is live
- nvme_read_ana_log() call from nvme_mpath_init_identify()
therefore only fetches and parses the ANA log;
any erros in this process will fail the ctrl setup as appropriate;
- a separate function nvme_mpath_update()
is called in nvme_start_ctrl();
this parses the ANA log without fetching it.
At this point the ctrl is live,
therefore, disks can be set live normally.
Sample failure:
nvme nvme0: starting error recovery
nvme nvme0: Reconnecting in 10 seconds...
block nvme0n6: no usable path - requeuing I/O
INFO: task kworker/u8:3:312 blocked for more than 122 seconds.
Tainted: G E 5.14.5-1.el7.elrepo.x86_64 #1
Workqueue: nvme-wq nvme_tcp_reconnect_ctrl_work [nvme_tcp]
Call Trace:
__schedule+0x2a2/0x7e0
schedule+0x4e/0xb0
io_schedule+0x16/0x40
wait_on_page_bit_common+0x15c/0x3e0
do_read_cache_page+0x1e0/0x410
read_cache_page+0x12/0x20
read_part_sector+0x46/0x100
read_lba+0x121/0x240
efi_partition+0x1d2/0x6a0
bdev_disk_changed.part.0+0x1df/0x430
bdev_disk_changed+0x18/0x20
blkdev_get_whole+0x77/0xe0
blkdev_get_by_dev+0xd2/0x3a0
__device_add_disk+0x1ed/0x310
device_add_disk+0x13/0x20
nvme_mpath_set_live+0x138/0x1b0 [nvme_core]
nvme_update_ns_ana_state+0x2b/0x30 [nvme_core]
nvme_update_ana_state+0xca/0xe0 [nvme_core]
nvme_parse_ana_log+0xac/0x170 [nvme_core]
nvme_read_ana_log+0x7d/0xe0 [nvme_core]
nvme_mpath_init_identify+0x105/0x150 [nvme_core]
nvme_init_identify+0x2df/0x4d0 [nvme_core]
nvme_init_ctrl_finish+0x8d/0x3b0 [nvme_core]
nvme_tcp_setup_ctrl+0x337/0x390 [nvme_tcp]
nvme_tcp_reconnect_ctrl_work+0x24/0x40 [nvme_tcp]
process_one_work+0x1bd/0x360
worker_thread+0x50/0x3d0
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sagi Grimberg [Mon, 21 Mar 2022 11:57:27 +0000 (13:57 +0200)]
nvmet: use a private workqueue instead of the system workqueue
[ Upstream commit
8832cf922151e9dfa2821736beb0ae2dd3968b6e ]
Any attempt to flush kernel-global WQs has possibility of deadlock
so we should simply stop using them, instead introduce nvmet_wq
which is the generic nvmet workqueue for work elements that
don't explicitly require a dedicated workqueue (by the mere fact
that they are using the system_wq).
Changes were done using the following replaces:
- s/schedule_work(/queue_work(nvmet_wq, /g
- s/schedule_delayed_work(/queue_delayed_work(nvmet_wq, /g
- s/flush_scheduled_work()/flush_workqueue(nvmet_wq)/g
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael S. Tsirkin [Sun, 20 Mar 2022 11:02:14 +0000 (07:02 -0400)]
tools/virtio: compile with -pthread
[ Upstream commit
f03560a57c1f60db6ac23ffd9714e1c69e2f95c7 ]
When using pthreads, one has to compile and link with -lpthread,
otherwise e.g. glibc is not guaranteed to be reentrant.
This replaces -lpthread.
Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhu Lingshan [Tue, 22 Feb 2022 11:54:25 +0000 (19:54 +0800)]
vhost_vdpa: don't setup irq offloading when irq_num < 0
[ Upstream commit
cce0ab2b2a39072d81f98017f7b076f3410ef740 ]
When irq number is negative(e.g., -EINVAL), the virtqueue
may be disabled or the virtqueues are sharing a device irq.
In such case, we should not setup irq offloading for a virtqueue.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Link: https://lore.kernel.org/r/20220222115428.998334-3-lingshan.zhu@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Niklas Schnelle [Mon, 20 Sep 2021 07:32:21 +0000 (09:32 +0200)]
s390/pci: improve zpci_dev reference counting
[ Upstream commit
c122383d221dfa2f41cfe5e672540595de986fde ]
Currently zpci_dev uses kref based reference counting but only accounts
for one original reference plus one reference from an added pci_dev to
its underlying zpci_dev. Counting just the original reference worked
until the pci_dev reference was added in commit
2a671f77ee49 ("s390/pci:
fix use after free of zpci_dev") because once a zpci_dev goes away, i.e.
enters the reserved state, it would immediately get released. However
with the pci_dev reference this is no longer the case and the zpci_dev
may still appear in multiple availability events indicating that it was
reserved. This was solved by detecting when the zpci_dev is already on
its way out but still hanging around. This has however shown some light
on how unusual our zpci_dev reference counting is.
Improve upon this by modelling zpci_dev reference counting on pci_dev.
Analogous to pci_get_slot() increment the reference count in
get_zdev_by_fid(). Thus all users of get_zdev_by_fid() must drop the
reference once they are done with the zpci_dev.
Similar to pci_scan_single_device(), zpci_create_device() returns the
device with an initial count of 1 and the device added to the zpci_list
(analogous to the PCI bus' device_list). In turn users of
zpci_create_device() must only drop the reference once the device is
gone from the point of view of the zPCI subsystem, it might still be
referenced by the common PCI subsystem though.
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Heiko Carstens [Wed, 16 Mar 2022 18:13:20 +0000 (19:13 +0100)]
s390/traps: improve panic message for translation-specification exception
[ Upstream commit
f09354ffd84eef3c88efa8ba6df05efe50cfd16a ]
There are many different types of translation exceptions but only a
translation-specification exception leads to a kernel panic since it
indicates corrupted page tables, which must never happen.
Improve the panic message so it is a bit more obvious what this is about.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kai-Heng Feng [Fri, 25 Mar 2022 16:05:00 +0000 (00:05 +0800)]
ALSA: hda/realtek: Enable headset mic on Lenovo P360
[ Upstream commit
5a8738571747c1e275a40b69a608657603867b7e ]
Lenovo P360 is another platform equipped with ALC897, and it needs
ALC897_FIXUP_HEADSET_MIC_PIN quirk to make its headset mic work.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20220325160501.705221-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peter Zijlstra [Tue, 22 Mar 2022 11:48:10 +0000 (12:48 +0100)]
crypto: x86/chacha20 - Avoid spurious jumps to other functions
[ Upstream commit
4327d168515fd8b5b92fa1efdf1d219fb6514460 ]
The chacha_Nblock_xor_avx512vl() functions all have their own,
identical, .LdoneN label, however in one particular spot {2,4} jump to
the 8 version instead of their own. Resulting in:
arch/x86/crypto/chacha-x86_64.o: warning: objtool: chacha_2block_xor_avx512vl() falls through to next function chacha_8block_xor_avx512vl()
arch/x86/crypto/chacha-x86_64.o: warning: objtool: chacha_4block_xor_avx512vl() falls through to next function chacha_8block_xor_avx512vl()
Make each function consistently use its own done label.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zheng Yongjun [Thu, 17 Mar 2022 13:16:13 +0000 (13:16 +0000)]
crypto: stm32 - fix reference leak in stm32_crc_remove
[ Upstream commit
e9a36feecee0ee5845f2e0656f50f9942dd0bed3 ]
pm_runtime_get_sync() will increment pm usage counter even it
failed. Forgetting to call pm_runtime_put_noidle will result
in reference leak in stm32_crc_remove, so we should fix it.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andre Przywara [Fri, 11 Feb 2022 12:26:28 +0000 (12:26 +0000)]
rtc: sun6i: Fix time overflow handling
[ Upstream commit
9f6cd82eca7e91a0d0311242a87c6aa3c2737968 ]
Using "unsigned long" for UNIX timestamps is never a good idea, and
comparing the value of such a variable against U32_MAX does not do
anything useful on 32-bit systems.
Use the proper time64_t type when dealing with timestamps, and avoid
cutting down the time range unnecessarily. This also fixes the flawed
check for the alarm time being too far into the future.
The check for this condition is actually somewhat theoretical, as the
RTC counts till 2033 only anyways, and 2^32 seconds from now is not
before the year 2157 - at which point I hope nobody will be using this
hardware anymore.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220211122643.1343315-4-andre.przywara@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andreas Gruenbacher [Mon, 14 Mar 2022 17:32:02 +0000 (18:32 +0100)]
gfs2: Disable page faults during lockless buffered reads
[ Upstream commit
52f3f033a5dbd023307520af1ff551cadfd7f037 ]
During lockless buffered reads, filemap_read() holds page cache page
references while trying to copy data to the user-space buffer. The
calling process isn't holding the inode glock, but the page references
it holds prevent those pages from being removed from the page cache, and
that prevents the underlying inode glock from being moved to another
node. Thus, we can end up in the same kinds of distributed deadlock
situations as with normal (non-lockless) buffered reads.
Fix that by disabling page faults during lockless reads as well.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Monish Kumar R [Wed, 16 Mar 2022 07:54:49 +0000 (13:24 +0530)]
nvme-pci: add quirks for Samsung X5 SSDs
[ Upstream commit
bc360b0b1611566e1bd47384daf49af6a1c51837 ]
Add quirks to not fail the initialization and to have quick resume
latency after cold/warm reboot.
Signed-off-by: Monish Kumar R <monish.kumar.r@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zheng Yongjun [Mon, 21 Mar 2022 04:56:38 +0000 (21:56 -0700)]
Input: stmfts - fix reference leak in stmfts_input_open
[ Upstream commit
26623eea0da3476446909af96c980768df07bbd9 ]
pm_runtime_get_sync() will increment pm usage counter even it
failed. Forgetting to call pm_runtime_put_noidle will result
in reference leak in stmfts_input_open, so we should fix it.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Link: https://lore.kernel.org/r/20220317131604.53538-1-zhengyongjun3@huawei.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jeff LaBundy [Mon, 21 Mar 2022 04:55:27 +0000 (21:55 -0700)]
Input: add bounds checking to input_set_capability()
[ Upstream commit
409353cbe9fe48f6bc196114c442b1cff05a39bc ]
Update input_set_capability() to prevent kernel panic in case the
event code exceeds the bitmap for the given event type.
Suggested-by: Tomasz Moń <tomasz.mon@camlingroup.com>
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Tomasz Moń <tomasz.mon@camlingroup.com>
Link: https://lore.kernel.org/r/20220320032537.545250-1-jeff@labundy.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Gow [Thu, 10 Feb 2022 03:43:53 +0000 (11:43 +0800)]
um: Cleanup syscall_handler_t definition/cast, fix warning
[ Upstream commit
f4f03f299a56ce4d73c5431e0327b3b6cb55ebb9 ]
The syscall_handler_t type for x86_64 was defined as 'long (*)(void)',
but always cast to 'long (*)(long, long, long, long, long, long)' before
use. This now triggers a warning (see below).
Define syscall_handler_t as the latter instead, and remove the cast.
This simplifies the code, and fixes the warning.
Warning:
In file included from ../arch/um/include/asm/processor-generic.h:13
from ../arch/x86/um/asm/processor.h:41
from ../include/linux/rcupdate.h:30
from ../include/linux/rculist.h:11
from ../include/linux/pid.h:5
from ../include/linux/sched.h:14
from ../include/linux/ptrace.h:6
from ../arch/um/kernel/skas/syscall.c:7:
../arch/um/kernel/skas/syscall.c: In function ‘handle_syscall’:
../arch/x86/um/shared/sysdep/syscalls_64.h:18:11: warning: cast between incompatible function types from ‘long int (*)(void)’ to ‘long int (*)(long int, long int, long int, long int, long int, long int)’ [
-Wcast-function-type]
18 | (((long (*)(long, long, long, long, long, long)) \
| ^
../arch/x86/um/asm/ptrace.h:36:62: note: in definition of macro ‘PT_REGS_SET_SYSCALL_RETURN’
36 | #define PT_REGS_SET_SYSCALL_RETURN(r, res) (PT_REGS_AX(r) = (res))
| ^~~
../arch/um/kernel/skas/syscall.c:46:33: note: in expansion of macro ‘EXECUTE_SYSCALL’
46 | EXECUTE_SYSCALL(syscall, regs));
| ^~~~~~~~~~~~~~~
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hugo Villeneuve [Tue, 8 Feb 2022 16:29:07 +0000 (11:29 -0500)]
rtc: pcf2127: fix bug when reading alarm registers
[ Upstream commit
73ce05302007eece23a6acb7dc124c92a2209087 ]
The first bug is that reading the 5 alarm registers results in a read
operation of 20 bytes. The reason is because the destination buffer is
defined as an array of "unsigned int", and we use the sizeof()
operator on this array to define the bulk read count.
The second bug is that the read value is invalid, because we are
indexing the destination buffer as integers (4 bytes), instead of
indexing it as u8.
Changing the destination buffer type to u8 fixes both problems.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220208162908.3182581-1-hugo@hugovil.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vincent Whitchurch [Fri, 10 Dec 2021 16:09:51 +0000 (17:09 +0100)]
rtc: fix use-after-free on device removal
[ Upstream commit
c8fa17d9f08a448184f03d352145099b5beb618e ]
If the irqwork is still scheduled or running while the RTC device is
removed, a use-after-free occurs in rtc_timer_do_work(). Cleanup the
timerqueue and ensure the work is stopped to fix this.
BUG: KASAN: use-after-free in mutex_lock+0x94/0x110
Write of size 8 at addr
ffffff801d846338 by task kworker/3:1/41
Workqueue: events rtc_timer_do_work
Call trace:
mutex_lock+0x94/0x110
rtc_timer_do_work+0xec/0x630
process_one_work+0x5fc/0x1344
...
Allocated by task 551:
kmem_cache_alloc_trace+0x384/0x6e0
devm_rtc_allocate_device+0xf0/0x574
devm_rtc_device_register+0x2c/0x12c
...
Freed by task 572:
kfree+0x114/0x4d0
rtc_device_release+0x64/0x80
device_release+0x8c/0x1f4
kobject_put+0x1c4/0x4b0
put_device+0x20/0x30
devm_rtc_release_device+0x1c/0x30
devm_action_release+0x54/0x90
release_nodes+0x124/0x310
devres_release_group+0x170/0x240
i2c_device_remove+0xd8/0x314
...
Last potentially related work creation:
insert_work+0x5c/0x330
queue_work_on+0xcc/0x154
rtc_set_time+0x188/0x5bc
rtc_dev_ioctl+0x2ac/0xbd0
...
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211210160951.7718-1-vincent.whitchurch@axis.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Greg Thelen [Tue, 17 May 2022 00:08:35 +0000 (17:08 -0700)]
Revert "drm/i915/opregion: check port number bounds for SWSCI display power state"
This reverts commit
b84857c06ef9e72d09fadafdbb3ce9af64af954f.
5.10 stable contains 2 identical commits:
1. commit
eb7bf11e8ef1 ("drm/i915/opregion: check port number bounds for SWSCI display power state")
2. commit
b84857c06ef9 ("drm/i915/opregion: check port number bounds for SWSCI display power state")
Both commits add separate checks for the same condition. Revert the 2nd
redundant check to match upstream, which only has one check.
Signed-off-by: Greg Thelen <gthelen@google.com>
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hyeonggon Yoo [Tue, 10 May 2022 00:34:29 +0000 (17:34 -0700)]
mm/kfence: reset PG_slab and memcg_data before freeing __kfence_pool
commit
2839b0999c20c9f6bf353849c69370e121e2fa1a upstream.
When kfence fails to initialize kfence pool, it frees the pool. But it
does not reset memcg_data and PG_slab flag.
Below is a BUG because of this. Let's fix it by resetting memcg_data
and PG_slab flag before free.
[ 0.089149] BUG: Bad page state in process swapper/0 pfn:3d8e06
[ 0.089149] page:
ffffea46cf638180 refcount:0 mapcount:0 mapping:
0000000000000000 index:0x0 pfn:0x3d8e06
[ 0.089150] memcg:
ffffffff94a475d1
[ 0.089150] flags: 0x17ffffc0000200(slab|node=0|zone=2|lastcpupid=0x1fffff)
[ 0.089151] raw:
0017ffffc0000200 ffffea46cf638188 ffffea46cf638188 0000000000000000
[ 0.089152] raw:
0000000000000000 0000000000000000 00000000ffffffff ffffffff94a475d1
[ 0.089152] page dumped because: page still charged to cgroup
[ 0.089153] Modules linked in:
[ 0.089153] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G B W 5.18.0-rc1+ #965
[ 0.089154] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
[ 0.089154] Call Trace:
[ 0.089155] <TASK>
[ 0.089155] dump_stack_lvl+0x49/0x5f
[ 0.089157] dump_stack+0x10/0x12
[ 0.089158] bad_page.cold+0x63/0x94
[ 0.089159] check_free_page_bad+0x66/0x70
[ 0.089160] __free_pages_ok+0x423/0x530
[ 0.089161] __free_pages_core+0x8e/0xa0
[ 0.089162] memblock_free_pages+0x10/0x12
[ 0.089164] memblock_free_late+0x8f/0xb9
[ 0.089165] kfence_init+0x68/0x92
[ 0.089166] start_kernel+0x789/0x992
[ 0.089167] x86_64_start_reservations+0x24/0x26
[ 0.089168] x86_64_start_kernel+0xa9/0xaf
[ 0.089170] secondary_startup_64_no_verify+0xd5/0xdb
[ 0.089171] </TASK>
Link: https://lkml.kernel.org/r/YnPG3pQrqfcgOlVa@hyeyoo
Fixes: 0ce20dd84089 ("mm: add Kernel Electric-Fence infrastructure")
Fixes: 8f0b36497303 ("mm: kfence: fix objcgs vector allocation")
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[42.hyeyoo@gmail.com: backport - use struct page]
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Terry Bowman [Wed, 2 Feb 2022 15:35:25 +0000 (09:35 -0600)]
Watchdog: sp5100_tco: Enable Family 17h+ CPUs
commit
826270373f17fd8ebd10753ca0a5fd2ceb1dc38e upstream.
The driver currently uses a CPU family match of 17h to determine
EFCH_PM_DECODEEN_WDT_TMREN register support. This family check will not
support future AMD CPUs and instead will require driver updates to add
support.
Remove the family 17h family check and add a check for SMBus PCI
revision ID 0x51 or greater. The MMIO access method has been available
since at least SMBus controllers using PCI revision 0x51. This revision
check will support family 17h and future AMD processors including EFCH
functionality without requiring driver changes.
Co-developed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Tested-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220202153525.1693378-5-terry.bowman@amd.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Mario Limonciello <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Terry Bowman [Wed, 2 Feb 2022 15:35:24 +0000 (09:35 -0600)]
Watchdog: sp5100_tco: Add initialization using EFCH MMIO
commit
0578fff4aae5bce3f09875f58e68e9ffbab8daf5 upstream.
cd6h/cd7h port I/O can be disabled on recent AMD hardware. Read
accesses to disabled cd6h/cd7h port I/O will return F's and written
data is dropped. It is recommended to replace the cd6h/cd7h
port I/O with MMIO.
Co-developed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Tested-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220202153525.1693378-4-terry.bowman@amd.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Mario Limonciello <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Terry Bowman [Wed, 2 Feb 2022 15:35:23 +0000 (09:35 -0600)]
Watchdog: sp5100_tco: Refactor MMIO base address initialization
commit
1f182aca230086d4a4469c0f9136a6ea762d6385 upstream.
Combine MMIO base address and alternate base address detection. Combine
based on layout type. This will simplify the function by eliminating
a switch case.
Move existing request/release code into functions. This currently only
supports port I/O request/release. The move into a separate function
will make it ready for adding MMIO region support.
Co-developed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Tested-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220202153525.1693378-3-terry.bowman@amd.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Mario Limonciello <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Terry Bowman [Wed, 2 Feb 2022 15:35:22 +0000 (09:35 -0600)]
Watchdog: sp5100_tco: Move timer initialization into function
commit
abd71a948f7aab47ca49d3e7fe6afa6c48c8aae0 upstream.
Refactor driver's timer initialization into new function. This is needed
inorder to support adding new device layouts while using common timer
initialization.
Co-developed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Tested-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220202153525.1693378-2-terry.bowman@amd.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Mario Limonciello <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Terry Bowman [Wed, 9 Feb 2022 17:27:17 +0000 (11:27 -0600)]
i2c: piix4: Enable EFCH MMIO for Family 17h+
commit
6cf72f41808ab5db1d7718b999b3ff0166e67e45 upstream.
Enable EFCH MMIO using check for SMBus PCI revision ID value 0x51 or
greater. This PCI revision ID check will enable family 17h and future
AMD processors with the same EFCH SMBus controller HW.
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Cc: Mario Limonciello <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Terry Bowman [Wed, 9 Feb 2022 17:27:16 +0000 (11:27 -0600)]
i2c: piix4: Add EFCH MMIO support for SMBus port select
commit
381a3083c6747ae5cdbef9b176d57d1b966db49f upstream.
AMD processors include registers capable of selecting between 2 SMBus
ports. Port selection is made during each user access by writing to
FCH::PM::DECODEEN[smbus0sel]. Change the driver to use MMIO during
SMBus port selection because cd6h/cd7h port I/O is not available on
later AMD processors.
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Cc: Mario Limonciello <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Terry Bowman [Wed, 9 Feb 2022 17:27:15 +0000 (11:27 -0600)]
i2c: piix4: Add EFCH MMIO support to SMBus base address detect
commit
46967bc1ee93acd1d8953c87dc16f43de4076f93 upstream.
The EFCH SMBus controller's base address is determined using details in
FCH::PM::DECODEEN[smbusasfiobase] and FCH::PM::DECODEEN[smbusasfioen].These
register fields were accessed using cd6h/cd7h port I/O. cd6h/cd7h port I/O
is no longer available in later AMD processors. Change base address
detection to use MMIO instead of port I/O cd6h/cd7h.
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Cc: Mario Limonciello <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Terry Bowman [Wed, 9 Feb 2022 17:27:14 +0000 (11:27 -0600)]
i2c: piix4: Add EFCH MMIO support to region request and release
commit
7c148722d074c29fb998578eea5de3c14b9608c9 upstream.
EFCH cd6h/cd7h port I/O may no longer be available on later AMD
processors and it is recommended to use MMIO instead. Update the
request and release functions to support MMIO.
MMIO request/release and mmapping require details during cleanup.
Add a MMIO configuration structure containing resource and vaddress
details for mapping the region, accessing the region, and releasing
the region.
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
[wsa: rebased after fixup in previous patch]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Cc: Mario Limonciello <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Terry Bowman [Wed, 9 Feb 2022 17:27:13 +0000 (11:27 -0600)]
i2c: piix4: Move SMBus port selection into function
commit
fbafbd51bff52cb3a920fd98d4dae2a78dd433d0 upstream.
Move port selection code into a separate function. Refactor is in
preparation for following MMIO changes.
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Cc: Mario Limonciello <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Terry Bowman [Wed, 9 Feb 2022 17:27:12 +0000 (11:27 -0600)]
i2c: piix4: Move SMBus controller base address detect into function
commit
0a59a24e14e9b21dcbb6b8ea41422e2fdfa437fd upstream.
Move SMBus controller base address detection into function. Refactor
is in preparation for following MMIO changes.
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Cc: Mario Limonciello <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Terry Bowman [Wed, 9 Feb 2022 17:27:11 +0000 (11:27 -0600)]
i2c: piix4: Move port I/O region request/release code into functions
commit
a3325d225b00889f4b7fdb25d83033cae1048a92 upstream.
Move duplicated region request and release code into a function. Move is
in preparation for following MMIO changes.
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
[wsa: added missing curly brace]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Cc: Mario Limonciello <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Terry Bowman [Wed, 9 Feb 2022 17:27:10 +0000 (11:27 -0600)]
i2c: piix4: Replace hardcoded memory map size with a #define
commit
93102cb449780f7b4eecf713451627b78373ce49 upstream.
Replace number constant with #define to improve readability and
maintainability.
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Cc: Mario Limonciello <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Terry Bowman [Wed, 9 Feb 2022 17:27:09 +0000 (11:27 -0600)]
kernel/resource: Introduce request_mem_region_muxed()
commit
27c196c7b73cb70bbed3a9df46563bab60e63415 upstream.
Support for requesting muxed memory region is implemented but not
currently callable as a macro. Add the request muxed memory
region macro.
MMIO memory accesses can be synchronized using request_mem_region() which
is already available. This call will return failure if the resource is
busy. The 'muxed' version of this macro will handle a busy resource by
using a wait queue to retry until the resource is available.
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Cc: Mario Limonciello <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Willy Tarreau [Sun, 8 May 2022 09:37:07 +0000 (11:37 +0200)]
floppy: use a statically allocated error counter
commit
f71f01394f742fc4558b3f9f4c7ef4c4cf3b07c8 upstream.
Interrupt handler bad_flp_intr() may cause a UAF on the recently freed
request just to increment the error count. There's no point keeping
that one in the request anyway, and since the interrupt handler uses a
static pointer to the error which cannot be kept in sync with the
pending request, better make it use a static error counter that's reset
for each new request. This reset now happens when entering
redo_fd_request() for a new request via set_next_request().
One initial concern about a single error counter was that errors on one
floppy drive could be reported on another one, but this problem is not
real given that the driver uses a single drive at a time, as that
PC-compatible controllers also have this limitation by using shared
signals. As such the error count is always for the "current" drive.
Reported-by: Minh Yuan <yuanmingbuaa@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Tested-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pavel Begunkov [Sat, 16 Oct 2021 23:07:08 +0000 (00:07 +0100)]
io_uring: arm poll for non-nowait files
commit
e74ead135bc4459f7d40b1f8edab1333a28b54e8 upstream.
Don't check if we can do nowait before arming apoll, there are several
reasons for that. First, we don't care much about files that don't
support nowait. Second, it may be useful -- we don't want to be taking
away extra workers from io-wq when it can go in some async. Even if it
will go through io-wq eventually, it make difference in the numbers of
workers actually used. And the last one, it's needed to clean nowait in
future commits.
[kernel test robot: fix unused-var]
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/9d06f3cb2c8b686d970269a87986f154edb83043.1634425438.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Schspa Shi [Sun, 8 May 2022 15:02:47 +0000 (23:02 +0800)]
usb: gadget: fix race when gadget driver register via ioctl
commit
5f0b5f4d50fa0faa8c76ef9d42a42e8d43f98b44 upstream.
The usb_gadget_register_driver can be called multi time by to
threads via USB_RAW_IOCTL_RUN ioctl syscall, which will lead
to multiple registrations.
Call trace:
driver_register+0x220/0x3a0 drivers/base/driver.c:171
usb_gadget_register_driver_owner+0xfb/0x1e0
drivers/usb/gadget/udc/core.c:1546
raw_ioctl_run drivers/usb/gadget/legacy/raw_gadget.c:513 [inline]
raw_ioctl+0x1883/0x2730 drivers/usb/gadget/legacy/raw_gadget.c:1220
ioctl USB_RAW_IOCTL_RUN
This routine allows two processes to register the same driver instance
via ioctl syscall. which lead to a race condition.
Please refer to the following scenarios.
T1 T2
------------------------------------------------------------------
usb_gadget_register_driver_owner
driver_register driver_register
driver_find driver_find
bus_add_driver bus_add_driver
priv alloced <context switch>
drv->p = priv;
<schedule out>
kobject_init_and_add // refcount = 1;
//couldn't find an available UDC or it's busy
<context switch>
priv alloced
drv->priv = priv;
kobject_init_and_add
---> refcount = 1 <------
// register success
<context switch>
===================== another ioctl/process ======================
driver_register
driver_find
k = kset_find_obj()
---> refcount = 2 <------
<context out>
driver_unregister
// drv->p become T2's priv
---> refcount = 1 <------
<context switch>
kobject_put(k)
---> refcount = 0 <------
return priv->driver;
--------UAF here----------
There will be UAF in this scenario.
We can fix it by adding a new STATE_DEV_REGISTERING device state to
avoid double register.
Reported-by: syzbot+dc7c3ca638e773db07f6@syzkaller.appspotmail.com
Link: https://lore.kernel.org/all/000000000000e66c2805de55b15a@google.com/
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Schspa Shi <schspa@gmail.com>
Link: https://lore.kernel.org/r/20220508150247.38204-1-schspa@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Wed, 18 May 2022 08:26:57 +0000 (10:26 +0200)]
Linux 5.15.41
Link: https://lore.kernel.org/r/20220516193623.989270214@linuxfoundation.org
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Vacura [Tue, 3 May 2022 20:10:38 +0000 (15:10 -0500)]
usb: gadget: uvc: allow for application to cleanly shutdown
commit
b81ac4395bbeaf36e078dea1a48c02dd97b76235 upstream.
Several types of kernel panics can occur due to timing during the uvc
gadget removal. This appears to be a problem with gadget resources being
managed by both the client application's v4l2 open/close and the UDC
gadget bind/unbind. Since the concept of USB_GADGET_DELAYED_STATUS
doesn't exist for unbind, add a wait to allow for the application to
close out.
Some examples of the panics that can occur are:
<1>[ 1147.652313] Unable to handle kernel NULL pointer dereference at
virtual address
0000000000000028
<4>[ 1147.652510] Call trace:
<4>[ 1147.652514] usb_gadget_disconnect+0x74/0x1f0
<4>[ 1147.652516] usb_gadget_deactivate+0x38/0x168
<4>[ 1147.652520] usb_function_deactivate+0x54/0x90
<4>[ 1147.652524] uvc_function_disconnect+0x14/0x38
<4>[ 1147.652527] uvc_v4l2_release+0x34/0xa0
<4>[ 1147.652537] __fput+0xdc/0x2c0
<4>[ 1147.652540] ____fput+0x10/0x1c
<4>[ 1147.652545] task_work_run+0xe4/0x12c
<4>[ 1147.652549] do_notify_resume+0x108/0x168
<1>[ 282.950561][ T1472] Unable to handle kernel NULL pointer
dereference at virtual address
00000000000005b8
<6>[ 282.953111][ T1472] Call trace:
<6>[ 282.953121][ T1472] usb_function_deactivate+0x54/0xd4
<6>[ 282.953134][ T1472] uvc_v4l2_release+0xac/0x1e4
<6>[ 282.953145][ T1472] v4l2_release+0x134/0x1f0
<6>[ 282.953167][ T1472] __fput+0xf4/0x428
<6>[ 282.953178][ T1472] ____fput+0x14/0x24
<6>[ 282.953193][ T1472] task_work_run+0xac/0x130
<3>[ 213.410077][ T29] configfs-gadget gadget: uvc: Failed to queue
request (-108).
<1>[ 213.410116][ T29] Unable to handle kernel NULL pointer
dereference at virtual address
0000000000000003
<6>[ 213.413460][ T29] Call trace:
<6>[ 213.413474][ T29] uvcg_video_pump+0x1f0/0x384
<6>[ 213.413489][ T29] process_one_work+0x2a4/0x544
<6>[ 213.413502][ T29] worker_thread+0x350/0x784
<6>[ 213.413515][ T29] kthread+0x2ac/0x320
<6>[ 213.413528][ T29] ret_from_fork+0x10/0x30
Signed-off-by: Dan Vacura <w36195@motorola.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220503201039.71720-1-w36195@motorola.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Tretter [Sun, 17 Oct 2021 21:50:13 +0000 (23:50 +0200)]
usb: gadget: uvc: rename function to be more consistent
commit
e6bab2b66329b40462fb1bed6f98bc3fcf543a1c upstream.
When enabling info debugging for the uvc gadget, the bind and unbind
infos use different formats. Change the unbind to visually match the
bind.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20211017215017.18392-3-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicolas Dichtel [Wed, 4 May 2022 09:07:38 +0000 (11:07 +0200)]
ping: fix address binding wrt vrf
commit
e1a7ac6f3ba6e157adcd0ca94d92a401f1943f56 upstream.
When ping_group_range is updated, 'ping' uses the DGRAM ICMP socket,
instead of an IP raw socket. In this case, 'ping' is unable to bind its
socket to a local address owned by a vrflite.
Before the patch:
$ sysctl -w net.ipv4.ping_group_range='0
2147483647'
$ ip link add blue type vrf table 10
$ ip link add foo type dummy
$ ip link set foo master blue
$ ip link set foo up
$ ip addr add 192.168.1.1/24 dev foo
$ ip addr add 2001::1/64 dev foo
$ ip vrf exec blue ping -c1 -I 192.168.1.1 192.168.1.2
ping: bind: Cannot assign requested address
$ ip vrf exec blue ping6 -c1 -I 2001::1 2001::2
ping6: bind icmp socket: Cannot assign requested address
CC: stable@vger.kernel.org
Fixes: 1b69c6d0ae90 ("net: Introduce L3 Master device abstraction")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Trond Myklebust [Sun, 3 Apr 2022 19:58:11 +0000 (15:58 -0400)]
SUNRPC: Ensure we flush any closed sockets before xs_xprt_free()
commit
f00432063db1a0db484e85193eccc6845435b80e upstream.
We must ensure that all sockets are closed before we call xprt_free()
and release the reference to the net namespace. The problem is that
calling fput() will defer closing the socket until delayed_fput() gets
called.
Let's fix the situation by allowing rpciod and the transport teardown
code (which runs on the system wq) to call __fput_sync(), and directly
close the socket.
Reported-by: Felix Fu <foyjog@gmail.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: a73881c96d73 ("SUNRPC: Fix an Oops in udp_poll()")
Cc: stable@vger.kernel.org # 5.1.x: 3be232f11a3c: SUNRPC: Prevent immediate close+reconnect
Cc: stable@vger.kernel.org # 5.1.x: 89f42494f92f: SUNRPC: Don't call connect() more than once on a TCP socket
Cc: stable@vger.kernel.org # 5.1.x
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Meena Shanmugam <meenashanmugam@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Naoya Horiguchi [Fri, 29 Apr 2022 06:14:44 +0000 (23:14 -0700)]
mm/hwpoison: use pr_err() instead of dump_page() in get_any_page()
commit
1825b93b626e99eb9a0f9f50342c7b2fa201b387 upstream.
The following VM_BUG_ON_FOLIO() is triggered when memory error event
happens on the (thp/folio) pages which are about to be freed:
[ 1160.232771] page:
00000000b36a8a0f refcount:1 mapcount:0 mapping:
0000000000000000 index:0x1 pfn:0x16a000
[ 1160.236916] page:
00000000b36a8a0f refcount:0 mapcount:0 mapping:
0000000000000000 index:0x1 pfn:0x16a000
[ 1160.240684] flags: 0x57ffffc0800000(hwpoison|node=1|zone=2|lastcpupid=0x1fffff)
[ 1160.243458] raw:
0057ffffc0800000 dead000000000100 dead000000000122 0000000000000000
[ 1160.246268] raw:
0000000000000001 0000000000000000 00000000ffffffff 0000000000000000
[ 1160.249197] page dumped because: VM_BUG_ON_FOLIO(!folio_test_large(folio))
[ 1160.251815] ------------[ cut here ]------------
[ 1160.253438] kernel BUG at include/linux/mm.h:788!
[ 1160.256162] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[ 1160.258172] CPU: 2 PID: 115368 Comm: mceinj.sh Tainted: G E 5.18.0-rc1-v5.18-rc1-220404-2353-005-g83111+ #3
[ 1160.262049] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1.fc35 04/01/2014
[ 1160.265103] RIP: 0010:dump_page.cold+0x27e/0x2bd
[ 1160.266757] Code: fe ff ff 48 c7 c6 81 f1 5a 98 e9 4c fe ff ff 48 c7 c6 a1 95 59 98 e9 40 fe ff ff 48 c7 c6 50 bf 5a 98 48 89 ef e8 9d 04 6d ff <0f> 0b 41 f7 c4 ff 0f 00 00 0f 85 9f fd ff ff 49 8b 04 24 a9 00 00
[ 1160.273180] RSP: 0018:
ffffaa2c4d59fd18 EFLAGS:
00010292
[ 1160.274969] RAX:
000000000000003e RBX:
0000000000000001 RCX:
0000000000000000
[ 1160.277263] RDX:
0000000000000001 RSI:
ffffffff985995a1 RDI:
00000000ffffffff
[ 1160.279571] RBP:
ffffdc9c45a80000 R08:
0000000000000000 R09:
00000000ffffdfff
[ 1160.281794] R10:
ffffaa2c4d59fb08 R11:
ffffffff98940d08 R12:
ffffdc9c45a80000
[ 1160.283920] R13:
ffffffff985b6f94 R14:
0000000000000000 R15:
ffffdc9c45a80000
[ 1160.286641] FS:
00007eff54ce1740(0000) GS:
ffff99c67bd00000(0000) knlGS:
0000000000000000
[ 1160.289498] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 1160.291106] CR2:
00005628381a5f68 CR3:
0000000104712003 CR4:
0000000000170ee0
[ 1160.293031] Call Trace:
[ 1160.293724] <TASK>
[ 1160.294334] get_hwpoison_page+0x47d/0x570
[ 1160.295474] memory_failure+0x106/0xaa0
[ 1160.296474] ? security_capable+0x36/0x50
[ 1160.297524] hard_offline_page_store+0x43/0x80
[ 1160.298684] kernfs_fop_write_iter+0x11c/0x1b0
[ 1160.299829] new_sync_write+0xf9/0x160
[ 1160.300810] vfs_write+0x209/0x290
[ 1160.301835] ksys_write+0x4f/0xc0
[ 1160.302718] do_syscall_64+0x3b/0x90
[ 1160.303664] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 1160.304981] RIP: 0033:0x7eff54b018b7
As shown in the RIP address, this VM_BUG_ON in folio_entire_mapcount() is
called from dump_page("hwpoison: unhandlable page") in get_any_page().
The below explains the mechanism of the race:
CPU 0 CPU 1
memory_failure
get_hwpoison_page
get_any_page
dump_page
compound = PageCompound
free_pages_prepare
page->flags &= ~PAGE_FLAGS_CHECK_AT_PREP
folio_entire_mapcount
VM_BUG_ON_FOLIO(!folio_test_large(folio))
So replace dump_page() with safer one, pr_err().
Link: https://lkml.kernel.org/r/20220427053220.719866-1-naoya.horiguchi@linux.dev
Fixes: 74e8ee4708a8 ("mm: Turn head_compound_mapcount() into folio_entire_mapcount()")
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Charan Teja Reddy [Mon, 9 May 2022 19:49:57 +0000 (01:19 +0530)]
dma-buf: call dma_buf_stats_setup after dmabuf is in valid list
commit
ef3a6b70507a2add2cd2e01f5eb9b54d561bacb9 upstream.
When dma_buf_stats_setup() fails, it closes the dmabuf file which
results into the calling of dma_buf_file_release() where it does
list_del(&dmabuf->list_node) with out first adding it to the proper
list. This is resulting into panic in the below path:
__list_del_entry_valid+0x38/0xac
dma_buf_file_release+0x74/0x158
__fput+0xf4/0x428
____fput+0x14/0x24
task_work_run+0x178/0x24c
do_notify_resume+0x194/0x264
work_pending+0xc/0x5f0
Fix it by moving the dma_buf_stats_setup() after dmabuf is added to the
list.
Fixes: bdb8d06dfefd ("dmabuf: Add the capability to expose DMA-BUF stats in sysfs")
Signed-off-by: Charan Teja Reddy <quic_charante@quicinc.com>
Tested-by: T.J. Mercier <tjmercier@google.com>
Acked-by: T.J. Mercier <tjmercier@google.com>
Cc: <stable@vger.kernel.org> # 5.15.x+
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1652125797-2043-1-git-send-email-quic_charante@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Deucher [Tue, 10 May 2022 13:37:06 +0000 (09:37 -0400)]
Revert "drm/amd/pm: keep the BACO feature enabled for suspend"
commit
a56f445f807b0276fc0660c330bf93a9ea78e8ea upstream.
This reverts commit
eaa090538e8d21801c6d5f94590c3799e6a528b5.
Commit
ebc002e3ee78 ("drm/amdgpu: don't use BACO for reset in S3")
stops using BACO for reset during suspend, so it's no longer
necessary to leave BACO enabled during suspend. This fixes
resume from suspend on the navy flounder dGPU in the ASUS ROG
Strix G513QY.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2008
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1982
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zack Rusin [Wed, 2 Mar 2022 15:24:24 +0000 (10:24 -0500)]
drm/vmwgfx: Initialize drm_mode_fb_cmd2
commit
3059d9b9f6aa433a55b9d0d21b566396d5497c33 upstream.
Transition to drm_mode_fb_cmd2 from drm_mode_fb_cmd left the structure
unitialized. drm_mode_fb_cmd2 adds a few additional members, e.g. flags
and modifiers which were never initialized. Garbage in those members
can cause random failures during the bringup of the fbcon.
Initializing the structure fixes random blank screens after bootup due
to flags/modifiers mismatches during the fbcon bring up.
Fixes: dabdcdc9822a ("drm/vmwgfx: Switch to mode_cmd2")
Signed-off-by: Zack Rusin <zackr@vmware.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: <stable@vger.kernel.org> # v4.10+
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302152426.885214-7-zack@kde.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Trond Myklebust [Sat, 7 May 2022 17:53:59 +0000 (13:53 -0400)]
SUNRPC: Ensure that the gssproxy client can start in a connected state
commit
fd13359f54ee854f00134abc6be32da94ec53dbf upstream.
Ensure that the gssproxy client connects to the server from the gssproxy
daemon process context so that the AF_LOCAL socket connection is done
using the correct path and namespaces.
Fixes: 1d658336b05f ("SUNRPC: Add RPC based upcall mechanism for RPCGSS auth")
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fabio Estevam [Wed, 4 May 2022 14:31:04 +0000 (11:31 -0300)]
net: phy: micrel: Pass .probe for KS8737
commit
15f03ffe4bb951e982457f44b6cf6b06ef4cbb93 upstream.
Since commit
f1131b9c23fb ("net: phy: micrel: use
kszphy_suspend()/kszphy_resume for irq aware devices") the kszphy_suspend/
resume hooks are used.
These functions require the probe function to be called so that
priv can be allocated.
Otherwise, a NULL pointer dereference happens inside
kszphy_config_reset().
Cc: stable@vger.kernel.org
Fixes: f1131b9c23fb ("net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices")
Reported-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220504143104.1286960-2-festevam@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fabio Estevam [Wed, 4 May 2022 14:31:03 +0000 (11:31 -0300)]
net: phy: micrel: Do not use kszphy_suspend/resume for KSZ8061
commit
e333eed63a091a09bd0db191b7710c594c6e995b upstream.
Since commit
f1131b9c23fb ("net: phy: micrel: use
kszphy_suspend()/kszphy_resume for irq aware devices") the following
NULL pointer dereference is observed on a board with KSZ8061:
# udhcpc -i eth0
udhcpc: started, v1.35.0
8<--- cut here ---
Unable to handle kernel NULL pointer dereference at virtual address
00000008
pgd =
f73cef4e
[
00000008] *pgd=
00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in:
CPU: 0 PID: 196 Comm: ifconfig Not tainted 5.15.37-dirty #94
Hardware name: Freescale i.MX6 SoloX (Device Tree)
PC is at kszphy_config_reset+0x10/0x114
LR is at kszphy_resume+0x24/0x64
...
The KSZ8061 phy_driver structure does not have the .probe/..driver_data
fields, which means that priv is not allocated.
This causes the NULL pointer dereference inside kszphy_config_reset().
Fix the problem by using the generic suspend/resume functions as before.
Another alternative would be to provide the .probe and .driver_data
information into the structure, but to be on the safe side, let's
just restore Ethernet functionality by using the generic suspend/resume.
Cc: stable@vger.kernel.org
Fixes: f1131b9c23fb ("net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220504143104.1286960-1-festevam@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Rapoport [Tue, 10 May 2022 00:34:28 +0000 (17:34 -0700)]
arm[64]/memremap: don't abuse pfn_valid() to ensure presence of linear map
commit
260364d112bc822005224667c0c9b1b17a53eafd upstream.
The semantics of pfn_valid() is to check presence of the memory map for a
PFN and not whether a PFN is covered by the linear map. The memory map
may be present for NOMAP memory regions, but they won't be mapped in the
linear mapping. Accessing such regions via __va() when they are
memremap()'ed will cause a crash.
On v5.4.y the crash happens on qemu-arm with UEFI [1]:
<1>[ 0.084476] 8<--- cut here ---
<1>[ 0.084595] Unable to handle kernel paging request at virtual address
dfb76000
<1>[ 0.084938] pgd = (ptrval)
<1>[ 0.085038] [
dfb76000] *pgd=
5f7fe801, *pte=
00000000, *ppte=
00000000
...
<4>[ 0.093923] [<
c0ed6ce8>] (memcpy) from [<
c16a06f8>] (dmi_setup+0x60/0x418)
<4>[ 0.094204] [<
c16a06f8>] (dmi_setup) from [<
c16a38d4>] (arm_dmi_init+0x8/0x10)
<4>[ 0.094408] [<
c16a38d4>] (arm_dmi_init) from [<
c0302e9c>] (do_one_initcall+0x50/0x228)
<4>[ 0.094619] [<
c0302e9c>] (do_one_initcall) from [<
c16011e4>] (kernel_init_freeable+0x15c/0x1f8)
<4>[ 0.094841] [<
c16011e4>] (kernel_init_freeable) from [<
c0f028cc>] (kernel_init+0x8/0x10c)
<4>[ 0.095057] [<
c0f028cc>] (kernel_init) from [<
c03010e8>] (ret_from_fork+0x14/0x2c)
On kernels v5.10.y and newer the same crash won't reproduce on ARM because
commit
b10d6bca8720 ("arch, drivers: replace for_each_membock() with
for_each_mem_range()") changed the way memory regions are registered in
the resource tree, but that merely covers up the problem.
On ARM64 memory resources registered in yet another way and there the
issue of wrong usage of pfn_valid() to ensure availability of the linear
map is also covered.
Implement arch_memremap_can_ram_remap() on ARM and ARM64 to prevent access
to NOMAP regions via the linear mapping in memremap().
Link: https://lore.kernel.org/all/Yl65zxGgFzF1Okac@sirena.org.uk
Link: https://lkml.kernel.org/r/20220426060107.7618-1-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Tested-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org> [5.4+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Waiman Long [Wed, 27 Apr 2022 14:54:28 +0000 (10:54 -0400)]
cgroup/cpuset: Remove cpus_allowed/mems_allowed setup in cpuset_init_smp()
commit
2685027fca387b602ae565bff17895188b803988 upstream.
There are 3 places where the cpu and node masks of the top cpuset can
be initialized in the order they are executed:
1) start_kernel -> cpuset_init()
2) start_kernel -> cgroup_init() -> cpuset_bind()
3) kernel_init_freeable() -> do_basic_setup() -> cpuset_init_smp()
The first cpuset_init() call just sets all the bits in the masks.
The second cpuset_bind() call sets cpus_allowed and mems_allowed to the
default v2 values. The third cpuset_init_smp() call sets them back to
v1 values.
For systems with cgroup v2 setup, cpuset_bind() is called once. As a
result, cpu and memory node hot add may fail to update the cpu and node
masks of the top cpuset to include the newly added cpu or node in a
cgroup v2 environment.
For systems with cgroup v1 setup, cpuset_bind() is called again by
rebind_subsystem() when the v1 cpuset filesystem is mounted as shown
in the dmesg log below with an instrumented kernel.
[ 2.609781] cpuset_bind() called - v2 = 1
[ 3.079473] cpuset_init_smp() called
[ 7.103710] cpuset_bind() called - v2 = 0
smp_init() is called after the first two init functions. So we don't
have a complete list of active cpus and memory nodes until later in
cpuset_init_smp() which is the right time to set up effective_cpus
and effective_mems.
To fix this cgroup v2 mask setup problem, the potentially incorrect
cpus_allowed & mems_allowed setting in cpuset_init_smp() are removed.
For cgroup v2 systems, the initial cpuset_bind() call will set the masks
correctly. For cgroup v1 systems, the second call to cpuset_bind()
will do the right setup.
cc: stable@vger.kernel.org
Signed-off-by: Waiman Long <longman@redhat.com>
Tested-by: Feng Tang <feng.tang@intel.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jing Xia [Tue, 10 May 2022 02:35:14 +0000 (10:35 +0800)]
writeback: Avoid skipping inode writeback
commit
846a3351ddfe4a86eede4bb26a205c3f38ef84d3 upstream.
We have run into an issue that a task gets stuck in
balance_dirty_pages_ratelimited() when perform I/O stress testing.
The reason we observed is that an I_DIRTY_PAGES inode with lots
of dirty pages is in b_dirty_time list and standard background
writeback cannot writeback the inode.
After studing the relevant code, the following scenario may lead
to the issue:
task1 task2
----- -----
fuse_flush
write_inode_now //in b_dirty_time
writeback_single_inode
__writeback_single_inode
fuse_write_end
filemap_dirty_folio
__xa_set_mark:PAGECACHE_TAG_DIRTY
lock inode->i_lock
if mapping tagged PAGECACHE_TAG_DIRTY
inode->i_state |= I_DIRTY_PAGES
unlock inode->i_lock
__mark_inode_dirty:I_DIRTY_PAGES
lock inode->i_lock
-was dirty,inode stays in
-b_dirty_time
unlock inode->i_lock
if(!(inode->i_state & I_DIRTY_All))
-not true,so nothing done
This patch moves the dirty inode to b_dirty list when the inode
currently is not queued in b_io or b_more_io list at the end of
writeback_single_inode.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
CC: stable@vger.kernel.org
Fixes: 0ae45f63d4ef ("vfs: add support for a lazytime mount option")
Signed-off-by: Jing Xia <jing.xia@unisoc.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220510023514.27399-1-jing.xia@unisoc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Francesco Dolcini [Fri, 6 May 2022 06:08:15 +0000 (08:08 +0200)]
net: phy: Fix race condition on link status change
commit
91a7cda1f4b8bdf770000a3b60640576dafe0cec upstream.
This fixes the following error caused by a race condition between
phydev->adjust_link() and a MDIO transaction in the phy interrupt
handler. The issue was reproduced with the ethernet FEC driver and a
micrel KSZ9031 phy.
[ 146.195696] fec
2188000.ethernet eth0: MDIO read timeout
[ 146.201779] ------------[ cut here ]------------
[ 146.206671] WARNING: CPU: 0 PID: 571 at drivers/net/phy/phy.c:942 phy_error+0x24/0x6c
[ 146.214744] Modules linked in: bnep imx_vdoa imx_sdma evbug
[ 146.220640] CPU: 0 PID: 571 Comm: irq/128-
2188000 Not tainted
5.18.0-rc3-00080-gd569e86915b7 #9
[ 146.229563] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[ 146.236257] unwind_backtrace from show_stack+0x10/0x14
[ 146.241640] show_stack from dump_stack_lvl+0x58/0x70
[ 146.246841] dump_stack_lvl from __warn+0xb4/0x24c
[ 146.251772] __warn from warn_slowpath_fmt+0x5c/0xd4
[ 146.256873] warn_slowpath_fmt from phy_error+0x24/0x6c
[ 146.262249] phy_error from kszphy_handle_interrupt+0x40/0x48
[ 146.268159] kszphy_handle_interrupt from irq_thread_fn+0x1c/0x78
[ 146.274417] irq_thread_fn from irq_thread+0xf0/0x1dc
[ 146.279605] irq_thread from kthread+0xe4/0x104
[ 146.284267] kthread from ret_from_fork+0x14/0x28
[ 146.289164] Exception stack(0xe6fa1fb0 to 0xe6fa1ff8)
[ 146.294448] 1fa0:
00000000 00000000 00000000 00000000
[ 146.302842] 1fc0:
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 146.311281] 1fe0:
00000000 00000000 00000000 00000000 00000013 00000000
[ 146.318262] irq event stamp: 12325
[ 146.321780] hardirqs last enabled at (12333): [<
c01984c4>] __up_console_sem+0x50/0x60
[ 146.330013] hardirqs last disabled at (12342): [<
c01984b0>] __up_console_sem+0x3c/0x60
[ 146.338259] softirqs last enabled at (12324): [<
c01017f0>] __do_softirq+0x2c0/0x624
[ 146.346311] softirqs last disabled at (12319): [<
c01300ac>] __irq_exit_rcu+0x138/0x178
[ 146.354447] ---[ end trace
0000000000000000 ]---
With the FEC driver phydev->adjust_link() calls fec_enet_adjust_link()
calls fec_stop()/fec_restart() and both these function reset and
temporary disable the FEC disrupting any MII transaction that
could be happening at the same time.
fec_enet_adjust_link() and phy_read() can be running at the same time
when we have one additional interrupt before the phy_state_machine() is
able to terminate.
Thread 1 (phylib WQ) | Thread 2 (phy interrupt)
|
| phy_interrupt() <-- PHY IRQ
| handle_interrupt()
| phy_read()
| phy_trigger_machine()
| --> schedule phylib WQ
|
|
phy_state_machine() |
phy_check_link_status() |
phy_link_change() |
phydev->adjust_link() |
fec_enet_adjust_link() |
--> FEC reset | phy_interrupt() <-- PHY IRQ
| phy_read()
|
Fix this by acquiring the phydev lock in phy_interrupt().
Link: https://lore.kernel.org/all/20220422152612.GA510015@francesco-nb.int.toradex.com/
Fixes: c974bdbc3e77 ("net: phy: Use threaded IRQ, to allow IRQ from sleeping devices")
cc: <stable@vger.kernel.org>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220506060815.327382-1-francesco.dolcini@toradex.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Manuel Ullmann [Wed, 4 May 2022 19:30:44 +0000 (21:30 +0200)]
net: atlantic: always deep reset on pm op, fixing up my null deref regression
commit
1809c30b6e5a83a1de1435fe01aaa4de4d626a7c upstream.
The impact of this regression is the same for resume that I saw on
thaw: the kernel hangs and nothing except SysRq rebooting can be done.
Fixes regression in commit
cbe6c3a8f8f4 ("net: atlantic: invert deep
par in pm functions, preventing null derefs"), where I disabled deep
pm resets in suspend and resume, trying to make sense of the
atl_resume_common() deep parameter in the first place.
It turns out, that atlantic always has to deep reset on pm
operations. Even though I expected that and tested resume, I screwed
up by kexec-rebooting into an unpatched kernel, thus missing the
breakage.
This fixup obsoletes the deep parameter of atl_resume_common, but I
leave the cleanup for the maintainers to post to mainline.
Suspend and hibernation were successfully tested by the reporters.
Fixes: cbe6c3a8f8f4 ("net: atlantic: invert deep par in pm functions, preventing null derefs")
Link: https://lore.kernel.org/regressions/9-Ehc_xXSwdXcvZqKD5aSqsqeNj5Izco4MYEwnx5cySXVEc9-x_WC4C3kAoCqNTi-H38frroUK17iobNVnkLtW36V6VWGSQEOHXhmVMm5iQ=@protonmail.com/
Reported-by: Jordan Leppert <jordanleppert@protonmail.com>
Reported-by: Holger Hoffstaette <holger@applied-asynchrony.com>
Tested-by: Jordan Leppert <jordanleppert@protonmail.com>
Tested-by: Holger Hoffstaette <holger@applied-asynchrony.com>
CC: <stable@vger.kernel.org> # 5.10+
Signed-off-by: Manuel Ullmann <labre@posteo.de>
Link: https://lore.kernel.org/r/87bkw8dfmp.fsf@posteo.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xiaomeng Tong [Tue, 10 May 2022 20:48:46 +0000 (13:48 -0700)]
i40e: i40e_main: fix a missing check on list iterator
commit
3f95a7472d14abef284d8968734fe2ae7ff4845f upstream.
The bug is here:
ret = i40e_add_macvlan_filter(hw, ch->seid, vdev->dev_addr, &aq_err);
The list iterator 'ch' will point to a bogus position containing
HEAD if the list is empty or no element is found. This case must
be checked before any use of the iterator, otherwise it will
lead to a invalid memory access.
To fix this bug, use a new variable 'iter' as the list iterator,
while use the origin variable 'ch' as a dedicated pointer to
point to the found element.
Cc: stable@vger.kernel.org
Fixes: 1d8d80b4e4ff6 ("i40e: Add macvlan support on i40e")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20220510204846.2166999-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Robin Murphy [Tue, 5 Apr 2022 14:21:34 +0000 (15:21 +0100)]
drm/nouveau/tegra: Stop using iommu_present()
commit
87fd2b091fb33871a7f812658a0971e8e26f903f upstream.
Even if some IOMMU has registered itself on the platform "bus", that
doesn't necessarily mean it provides translation for the device we
care about. Replace iommu_present() with a more appropriate check.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[added cc for stable]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org # v5.0+
Link: https://patchwork.freedesktop.org/patch/msgid/70d40ea441da3663c2824d54102b471e9a621f8a.1649168494.git.robin.murphy@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zack Rusin [Fri, 18 Mar 2022 17:43:31 +0000 (13:43 -0400)]
drm/vmwgfx: Disable command buffers on svga3 without gbobjects
commit
21d1d192890ced87f2f04f8f4dea92406e0b162a upstream.
With very limited vram on svga3 it's difficult to handle all the surface
migrations. Without gbobjects, i.e. the ability to store surfaces in
guest mobs, there's no reason to support intermediate svga2 features,
especially because we can fall back to fb traces and svga3 will never
support those in-between features.
On svga3 we wither want to use fb traces or screen targets
(i.e. gbobjects), nothing in between. This fixes presentation on a lot
of fusion/esxi tech previews where the exposed svga3 caps haven't been
finalized yet.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: 2cd80dbd3551 ("drm/vmwgfx: Add basic support for SVGA3")
Cc: <stable@vger.kernel.org> # v5.14+
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318174332.440068-5-zack@kde.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xu Yu [Fri, 29 Apr 2022 06:14:43 +0000 (23:14 -0700)]
mm/huge_memory: do not overkill when splitting huge_zero_page
commit
478d134e9506c7e9bfe2830ed03dd85e97966313 upstream.
Kernel panic when injecting memory_failure for the global huge_zero_page,
when CONFIG_DEBUG_VM is enabled, as follows.
Injecting memory failure for pfn 0x109ff9 at process virtual address 0x20ff9000
page:
00000000fb053fc3 refcount:2 mapcount:0 mapping:
0000000000000000 index:0x0 pfn:0x109e00
head:
00000000fb053fc3 order:9 compound_mapcount:0 compound_pincount:0
flags: 0x17fffc000010001(locked|head|node=0|zone=2|lastcpupid=0x1ffff)
raw:
017fffc000010001 0000000000000000 dead000000000122 0000000000000000
raw:
0000000000000000 0000000000000000 00000002ffffffff 0000000000000000
page dumped because: VM_BUG_ON_PAGE(is_huge_zero_page(head))
------------[ cut here ]------------
kernel BUG at mm/huge_memory.c:2499!
invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 6 PID: 553 Comm: split_bug Not tainted 5.18.0-rc1+ #11
Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS
3288b3c 04/01/2014
RIP: 0010:split_huge_page_to_list+0x66a/0x880
Code: 84 9b fb ff ff 48 8b 7c 24 08 31 f6 e8 9f 5d 2a 00 b8 b8 02 00 00 e9 e8 fb ff ff 48 c7 c6 e8 47 3c 82 4c b
RSP: 0018:
ffffc90000dcbdf8 EFLAGS:
00010246
RAX:
000000000000003c RBX:
0000000000000001 RCX:
0000000000000000
RDX:
0000000000000000 RSI:
ffffffff823e4c4f RDI:
00000000ffffffff
RBP:
ffff88843fffdb40 R08:
0000000000000000 R09:
00000000fffeffff
R10:
ffffc90000dcbc48 R11:
ffffffff82d68448 R12:
ffffea0004278000
R13:
ffffffff823c6203 R14:
0000000000109ff9 R15:
ffffea000427fe40
FS:
00007fc375a26740(0000) GS:
ffff88842fd80000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007fc3757c9290 CR3:
0000000102174006 CR4:
00000000003706e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
try_to_split_thp_page+0x3a/0x130
memory_failure+0x128/0x800
madvise_inject_error.cold+0x8b/0xa1
__x64_sys_madvise+0x54/0x60
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fc3754f8bf9
Code: 01 00 48 81 c4 80 00 00 00 e9 f1 fe ff ff 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 8
RSP: 002b:
00007ffeda93a1d8 EFLAGS:
00000217 ORIG_RAX:
000000000000001c
RAX:
ffffffffffffffda RBX:
0000000000000000 RCX:
00007fc3754f8bf9
RDX:
0000000000000064 RSI:
0000000000003000 RDI:
0000000020ff9000
RBP:
00007ffeda93a200 R08:
0000000000000000 R09:
0000000000000000
R10:
00000000ffffffff R11:
0000000000000217 R12:
0000000000400490
R13:
00007ffeda93a2e0 R14:
0000000000000000 R15:
0000000000000000
We think that raising BUG is overkilling for splitting huge_zero_page, the
huge_zero_page can't be met from normal paths other than memory failure,
but memory failure is a valid caller. So we tend to replace the BUG to
WARN + returning -EBUSY, and thus the panic above won't happen again.
Link: https://lkml.kernel.org/r/f35f8b97377d5d3ede1bc5ac3114da888c57cbce.1651052574.git.xuyu@linux.alibaba.com
Fixes: d173d5417fb6 ("mm/memory-failure.c: skip huge_zero_page in memory_failure()")
Fixes: 6a46079cf57a ("HWPOISON: The high level memory error handler in the VM v7")
Signed-off-by: Xu Yu <xuyu@linux.alibaba.com>
Suggested-by: Yang Shi <shy828301@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xu Yu [Fri, 29 Apr 2022 06:14:43 +0000 (23:14 -0700)]
Revert "mm/memory-failure.c: skip huge_zero_page in memory_failure()"
commit
b4e61fc031b11dd807dffc46cebbf0e25966d3d1 upstream.
Patch series "mm/memory-failure: rework fix on huge_zero_page splitting".
This patch (of 2):
This reverts commit
d173d5417fb67411e623d394aab986d847e47dad.
The commit
d173d5417fb6 ("mm/memory-failure.c: skip huge_zero_page in
memory_failure()") explicitly skips huge_zero_page in memory_failure(), in
order to avoid triggering VM_BUG_ON_PAGE on huge_zero_page in
split_huge_page_to_list().
This works, but Yang Shi thinks that,
Raising BUG is overkilling for splitting huge_zero_page. The
huge_zero_page can't be met from normal paths other than memory
failure, but memory failure is a valid caller. So I tend to replace
the BUG to WARN + returning -EBUSY. If we don't care about the
reason code in memory failure, we don't have to touch memory
failure.
And for the issue that huge_zero_page will be set PG_has_hwpoisoned,
Yang Shi comments that,
The anonymous page fault doesn't check if the page is poisoned or
not since it typically gets a fresh allocated page and assumes the
poisoned page (isolated successfully) can't be reallocated again.
But huge zero page and base zero page are reused every time. So no
matter what fix we pick, the issue is always there.
Finally, Yang, David, Anshuman and Naoya all agree to fix the bug, i.e.,
to split huge_zero_page, in split_huge_page_to_list().
This reverts the commit
d173d5417fb6 ("mm/memory-failure.c: skip
huge_zero_page in memory_failure()"), and the original bug will be fixed
by the next patch.
Link: https://lkml.kernel.org/r/872cefb182ba1dd686b0e7db1e6b2ebe5a4fff87.1651039624.git.xuyu@linux.alibaba.com
Fixes: d173d5417fb6 ("mm/memory-failure.c: skip huge_zero_page in memory_failure()")
Fixes: 6a46079cf57a ("HWPOISON: The high level memory error handler in the VM v7")
Signed-off-by: Xu Yu <xuyu@linux.alibaba.com>
Suggested-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jeff Layton [Mon, 25 Apr 2022 19:54:27 +0000 (15:54 -0400)]
ceph: fix setting of xattrs on async created inodes
commit
620239d9a32e9fe27c9204ec11e40058671aeeb6 upstream.
Currently when we create a file, we spin up an xattr buffer to send
along with the create request. If we end up doing an async create
however, then we currently pass down a zero-length xattr buffer.
Fix the code to send down the xattr buffer in req->r_pagelist. If the
xattrs span more than a page, however give up and don't try to do an
async create.
Cc: stable@vger.kernel.org
URL: https://bugzilla.redhat.com/show_bug.cgi?id=
2063929
Fixes: 9a8d03ca2e2c ("ceph: attempt to do async create when possible")
Reported-by: John Fortin <fortinj66@gmail.com>
Reported-by: Sri Ramanujam <sri@ramanujam.io>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
AngeloGioacchino Del Regno [Wed, 27 Apr 2022 13:23:28 +0000 (15:23 +0200)]
serial: 8250_mtk: Fix register address for XON/XOFF character
commit
e1bfdbc7daca171c74a577b3dd0b36d76bb0ffcc upstream.
The XON1/XOFF1 character registers are at offset 0xa0 and 0xa8
respectively, so we cannot use the definition in serial_port.h.
Fixes: bdbd0a7f8f03 ("serial: 8250-mtk: modify baudrate setting")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220427132328.228297-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
AngeloGioacchino Del Regno [Wed, 27 Apr 2022 13:23:26 +0000 (15:23 +0200)]
serial: 8250_mtk: Fix UART_EFR register address
commit
bb0b197aadd928f52ce6f01f0ee977f0a08cf1be upstream.
On MediaTek SoCs, the UART IP is 16550A compatible, but there are some
specific quirks: we are declaring a register shift of 2, but this is
only valid for the majority of the registers, as there are some that
are out of the standard layout.
Specifically, this driver is using definitions from serial_reg.h, where
we have a UART_EFR register defined as 2: this results in a 0x8 offset,
but there we have the FCR register instead.
The right offset for the EFR register on MediaTek UART is at 0x98,
so, following the decimal definition convention in serial_reg.h and
accounting for the register left shift of two, add and use the correct
register address for this IP, defined as decimal 38, so that the final
calculation results in (0x26 << 2) = 0x98.
Fixes: bdbd0a7f8f03 ("serial: 8250-mtk: modify baudrate setting")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220427132328.228297-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Indan Zupancic [Thu, 5 May 2022 11:47:50 +0000 (13:47 +0200)]
fsl_lpuart: Don't enable interrupts too early
commit
401fb66a355eb0f22096cf26864324f8e63c7d78 upstream.
If an irq is pending when devm_request_irq() is called, the irq
handler will cause a NULL pointer access because initialisation
is not done yet.
Fixes: 9d7ee0e28da59 ("tty: serial: lpuart: avoid report NULL interrupt")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Indan Zupancic <Indan.Zupancic@mep-info.com>
Link: https://lore.kernel.org/r/20220505114750.45423-1-Indan.Zupancic@mep-info.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miaoqian Lin [Fri, 29 Apr 2022 16:49:17 +0000 (17:49 +0100)]
slimbus: qcom: Fix IRQ check in qcom_slim_probe
commit
fe503887eed6ea528e144ec8dacfa1d47aa701ac upstream.
platform_get_irq() returns non-zero IRQ number on success,
negative error number on failure.
And the doc of platform_get_irq() provides a usage example:
int irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
Fix the check of return value to catch errors correctly.
Fixes: ad7fcbc308b0 ("slimbus: qcom: Add Qualcomm Slimbus controller driver")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220429164917.5202-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sven Schwermer [Mon, 25 Apr 2022 14:34:50 +0000 (16:34 +0200)]
USB: serial: option: add Fibocom MA510 modem
commit
07989eb981d862f7f2be68d233d753f2e7ccc119 upstream.
The MA510 modem has 3 USB configurations that are configurable via the AT
command AT+GTUSBMODE={30,31,32} which make the modem enumerate with the
following interfaces, respectively:
30: Diag + QDSS + Modem + RMNET
31: Diag + Modem + AT + ECM
32: Modem + AT + ECM
The first configuration (30) reuses u-blox R410M's VID/PID with
identical interface configuration.
A detailed description of the USB configuration for each mode follows:
+GTUSBMODE: 30
--------------
T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#= 19 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=05c6 ProdID=90b2 Rev= 0.00
S: Manufacturer=Fibocom MA510 Modem
S: Product=Fibocom MA510 Modem
S: SerialNumber=
55e2695b
C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+GTUSBMODE: 31
--------------
T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#= 99 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=2cb7 ProdID=0106 Rev= 0.00
S: Manufacturer=Fibocom MA510 Modem
S: Product=Fibocom MA510 Modem
S: SerialNumber=
55e2695b
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
A: FirstIf#= 3 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option
E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
I: If#= 4 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+GTUSBMODE: 32
--------------
T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=100 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=2cb7 ProdID=010a Rev= 0.00
S: Manufacturer=Fibocom MA510 Modem
S: Product=Fibocom MA510 Modem
S: SerialNumber=
55e2695b
C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
A: FirstIf#= 2 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option
E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
I: If#= 3 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 3 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Sven Schwermer <sven.schwermer@disruptive-technologies.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sven Schwermer [Mon, 25 Apr 2022 14:34:49 +0000 (16:34 +0200)]
USB: serial: option: add Fibocom L610 modem
commit
714adff9a6271b5f1664b04c944b598141ebfe73 upstream.
The L610 modem has 3 USB configurations that are configurable via the AT
command AT+GTUSBMODE={31,32,33} which make the modem enumerate with the
following interfaces, respectively:
31: Modem + NV + MOS + Diag + LOG + AT + AT
32: ECM + Modem + NV + MOS + Diag + LOG + AT + AT
33: RNDIS + Modem + NV + MOS + Diag + LOG + AT + AT
A detailed description of the USB configuration for each mode follows:
+GTUSBMODE: 31
--------------
T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=124 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1782 ProdID=4d10 Rev= 0.00
S: Manufacturer=FIBOCOM
S: Product=L610
C:* #Ifs= 7 Cfg#= 1 Atr=e0 MxPwr=400mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+GTUSBMODE: 32
--------------
T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=122 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1782 ProdID=4d11 Rev= 0.00
S: Manufacturer=FIBOCOM
S: Product=L610
C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=400mA
A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+GTUSBMODE: 33
--------------
T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=126 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1782 ProdID=4d11 Rev= 0.00
S: Manufacturer=FIBOCOM
S: Product=L610
C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=400mA
A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03
I:* If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=4096ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Sven Schwermer <sven.schwermer@disruptive-technologies.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ethan Yang [Mon, 25 Apr 2022 05:58:40 +0000 (13:58 +0800)]
USB: serial: qcserial: add support for Sierra Wireless EM7590
commit
870b1eee2d844727b06e238c121d260bc5645580 upstream.
Add support for Sierra Wireless EM7590 0xc080/0xc081 compositions.
Signed-off-by: Ethan Yang <etyang@sierrawireless.com>
Link: https://lore.kernel.org/r/20220425055840.5693-1-etyang@sierrawireless.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Scott Chen [Mon, 25 Apr 2022 09:00:20 +0000 (17:00 +0800)]
USB: serial: pl2303: add device id for HP LM930 Display
commit
26a08f8bad3e1f98d3153f939fb8cd330da4cb26 upstream.
Add the device id for the HPLM930Display which is a PL2303GC based
device.
Signed-off-by: Scott Chen <scott@labau.com.tw>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ChiYuan Huang [Tue, 10 May 2022 05:13:00 +0000 (13:13 +0800)]
usb: typec: tcpci_mt6360: Update for BMC PHY setting
commit
4031cd95cba70c72e4cadc2d46624bcd31e5a6c0 upstream.
Update MT6360 BMC PHY Tx/Rx setting for the compatibility.
Macpaul reported this CtoDP cable attention message cannot be received from
MT6360 TCPC. But actually, attention message really sent from UFP_D
device.
After RD's comment, there may be BMC PHY Tx/Rx setting causes this issue.
Below's the detailed TCPM log and DP attention message didn't received from 6360
TCPCI.
[ 1206.367775] Identity: 0000:0000.0000
[ 1206.416570] Alternate mode 0: SVID 0xff01, VDO 1: 0x00000405
[ 1206.447378] AMS DFP_TO_UFP_ENTER_MODE start
[ 1206.447383] PD TX, header: 0x1d6f
[ 1206.449393] PD TX complete, status: 0
[ 1206.454110] PD RX, header: 0x184f [1]
[ 1206.456867] Rx VDM cmd 0xff018144 type 1 cmd 4 len 1
[ 1206.456872] AMS DFP_TO_UFP_ENTER_MODE finished
[ 1206.456873] cc:=4
[ 1206.473100] AMS STRUCTURED_VDMS start
[ 1206.473103] PD TX, header: 0x2f6f
[ 1206.475397] PD TX complete, status: 0
[ 1206.480442] PD RX, header: 0x2a4f [1]
[ 1206.483145] Rx VDM cmd 0xff018150 type 1 cmd 16 len 2
[ 1206.483150] AMS STRUCTURED_VDMS finished
[ 1206.483151] cc:=4
[ 1206.505643] AMS STRUCTURED_VDMS start
[ 1206.505646] PD TX, header: 0x216f
[ 1206.507933] PD TX complete, status: 0
[ 1206.512664] PD RX, header: 0x1c4f [1]
[ 1206.515456] Rx VDM cmd 0xff018151 type 1 cmd 17 len 1
[ 1206.515460] AMS STRUCTURED_VDMS finished
[ 1206.515461] cc:=4
Fixes: e1aefcdd394fd ("usb typec: mt6360: Add support for mt6360 Type-C driver")
Cc: stable <stable@vger.kernel.org>
Reported-by: Macpaul Lin <macpaul.lin@mediatek.com>
Tested-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Link: https://lore.kernel.org/r/1652159580-30959-1-git-send-email-u0084500@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Uwe Kleine-König [Mon, 2 May 2022 08:04:56 +0000 (10:04 +0200)]
usb: typec: tcpci: Don't skip cleanup in .remove() on error
commit
bbc126ae381cf0a27822c1f822d0aeed74cc40d9 upstream.
Returning an error value in an i2c remove callback results in an error
message being emitted by the i2c core, but otherwise it doesn't make a
difference. The device goes away anyhow and the devm cleanups are
called.
In this case the remove callback even returns early without stopping the
tcpm worker thread and various timers. A work scheduled on the work
queue, or a firing timer after tcpci_remove() returned probably results
in a use-after-free situation because the regmap and driver data were
freed. So better make sure that tcpci_unregister_port() is called even
if disabling the irq failed.
Also emit a more specific error message instead of the i2c core's
"remove failed (EIO), will be ignored" and return 0 to suppress the
core's warning.
This patch is (also) a preparation for making i2c remove callbacks
return void.
Fixes: 3ba76256fc4e ("usb: typec: tcpci: mask event interrupts when remove driver")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: stable <stable@vger.kernel.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220502080456.21568-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergey Ryazanov [Sun, 1 May 2022 17:58:28 +0000 (20:58 +0300)]
usb: cdc-wdm: fix reading stuck on device close
commit
01e01f5c89773c600a9f0b32c888de0146066c3a upstream.
cdc-wdm tracks whether a response reading request is in-progress and
blocks the next request from being sent until the previous request is
completed. As soon as last user closes the cdc-wdm device file, the
driver cancels any ongoing requests, resets the pending response
counter, but leaves the response reading in-progress flag
(WDM_RESPONDING) untouched.
So if the user closes the device file during the response receive
request is being performed, no more data will be obtained from the
modem. The request will be cancelled, effectively preventing the
WDM_RESPONDING flag from being reseted. Keeping the flag set will
prevent a new response receive request from being sent, permanently
blocking the read path. The read path will staying blocked until the
module will be reloaded or till the modem will be re-attached.
This stuck has been observed with a Huawei E3372 modem attached to an
OpenWrt router and using the comgt utility to set up a network
connection.
Fix this issue by clearing the WDM_RESPONDING flag on the device file
close.
Without this fix, the device reading stuck can be easily reproduced in a
few connection establishing attempts. With this fix, a load test for
modem connection re-establishing worked for several hours without any
issues.
Fixes: 922a5eadd5a3 ("usb: cdc-wdm: Fix race between autosuspend and reading from the device")
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20220501175828.8185-1-ryazanov.s.a@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Starke [Wed, 4 May 2022 08:17:32 +0000 (10:17 +0200)]
tty: n_gsm: fix mux activation issues in gsm_config()
commit
edd5f60c340086891fab094ad61270d6c80f9ca4 upstream.
The current implementation activates the mux if it was restarted and opens
the control channel if the mux was previously closed and we are now acting
as initiator instead of responder, which is the default setting.
This has two issues.
1) No mux is activated if we keep all default values and only switch to
initiator. The control channel is not allocated but will be opened next
which results in a NULL pointer dereference.
2) Switching the configuration after it was once configured while keeping
the initiator value the same will not reopen the control channel if it was
closed due to parameter incompatibilities. The mux remains dead.
Fix 1) by always activating the mux if it is dead after configuration.
Fix 2) by always opening the control channel after mux activation.
Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220504081733.3494-2-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Starke [Wed, 4 May 2022 08:17:31 +0000 (10:17 +0200)]
tty: n_gsm: fix buffer over-read in gsm_dlci_data()
commit
fd442e5ba30aaa75ea47b32149e7a3110dc20a46 upstream.
'len' is decreased after each octet that has its EA bit set to 0, which
means that the value is encoded with additional octets. However, the final
octet does not decreases 'len' which results in 'len' being one byte too
long. A buffer over-read may occur in tty_insert_flip_string() as it tries
to read one byte more than the passed content size of 'data'.
Decrease 'len' also for the final octet which has the EA bit set to 1 to
write the correct number of bytes from the internal receive buffer to the
virtual tty.
Fixes: 2e124b4a390c ("TTY: switch tty_flip_buffer_push")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220504081733.3494-1-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yang Yingliang [Thu, 5 May 2022 12:46:21 +0000 (20:46 +0800)]
tty/serial: digicolor: fix possible null-ptr-deref in digicolor_uart_probe()
commit
447ee1516f19f534a228dda237eddb202f23e163 upstream.
It will cause null-ptr-deref when using 'res', if platform_get_resource()
returns NULL, so move using 'res' after devm_ioremap_resource() that
will check it to avoid null-ptr-deref.
And use devm_platform_get_and_ioremap_resource() to simplify code.
Fixes: 5930cb3511df ("serial: driver for Conexant Digicolor USART")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220505124621.1592697-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adrian-Ken Rueegsegger [Mon, 9 May 2022 09:06:37 +0000 (11:06 +0200)]
x86/mm: Fix marking of unused sub-pmd ranges
commit
280abe14b6e0a38de9cc86fe6a019523aadd8f70 upstream.
The unused part precedes the new range spanned by the start, end parameters
of vmemmap_use_new_sub_pmd(). This means it actually goes from
ALIGN_DOWN(start, PMD_SIZE) up to start.
Use the correct address when applying the mark using memset.
Fixes: 8d400913c231 ("x86/vmemmap: handle unpopulated sub-pmd ranges")
Signed-off-by: Adrian-Ken Rueegsegger <ken@codelabs.ch>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220509090637.24152-2-ken@codelabs.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chunfeng Yun [Thu, 12 May 2022 06:49:30 +0000 (14:49 +0800)]
usb: xhci-mtk: fix fs isoc's transfer error
commit
c237566b78ad8c72bc0431c5d6171db8d12e6f94 upstream.
Due to the scheduler allocates the optimal bandwidth for FS ISOC endpoints,
this may be not enough actually and causes data transfer error, so come up
with an estimate that is no less than the worst case bandwidth used for
any one mframe, but may be an over-estimate.
Fixes: 451d3912586a ("usb: xhci-mtk: update fs bus bandwidth by bw_budget_table")
Cc: stable@vger.kernel.org
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20220512064931.31670-1-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Graf [Tue, 10 May 2022 12:37:17 +0000 (14:37 +0200)]
KVM: PPC: Book3S PR: Enable MSR_DR for switch_mmu_context()
commit
ee8348496c77e3737d0a6cda307a521f2cff954f upstream.
Commit
863771a28e27 ("powerpc/32s: Convert switch_mmu_context() to C")
moved the switch_mmu_context() to C. While in principle a good idea, it
meant that the function now uses the stack. The stack is not accessible
from real mode though.
So to keep calling the function, let's turn on MSR_DR while we call it.
That way, all pointer references to the stack are handled virtually.
In addition, make sure to save/restore r12 on the stack, as it may get
clobbered by the C function.
Fixes: 863771a28e27 ("powerpc/32s: Convert switch_mmu_context() to C")
Cc: stable@vger.kernel.org # v5.14+
Reported-by: Matt Evans <matt@ozlabs.org>
Signed-off-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220510123717.24508-1-graf@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thiébaud Weksteen [Mon, 2 May 2022 00:49:52 +0000 (10:49 +1000)]
firmware_loader: use kernel credentials when reading firmware
commit
581dd69830341d299b0c097fc366097ab497d679 upstream.
Device drivers may decide to not load firmware when probed to avoid
slowing down the boot process should the firmware filesystem not be
available yet. In this case, the firmware loading request may be done
when a device file associated with the driver is first accessed. The
credentials of the userspace process accessing the device file may be
used to validate access to the firmware files requested by the driver.
Ensure that the kernel assumes the responsibility of reading the
firmware.
This was observed on Android for a graphic driver loading their firmware
when the device file (e.g. /dev/mali0) was first opened by userspace
(i.e. surfaceflinger). The security context of surfaceflinger was used
to validate the access to the firmware file (e.g.
/vendor/firmware/mali.bin).
Previously, Android configurations were not setting up the
firmware_class.path command line argument and were relying on the
userspace fallback mechanism. In this case, the security context of the
userspace daemon (i.e. ueventd) was consistently used to read firmware
files. More Android devices are now found to set firmware_class.path
which gives the kernel the opportunity to read the firmware directly
(via kernel_read_file_from_path_initns). In this scenario, the current
process credentials were used, even if unrelated to the loading of the
firmware file.
Signed-off-by: Thiébaud Weksteen <tweek@google.com>
Cc: <stable@vger.kernel.org> # 5.10
Reviewed-by: Paul Moore <paul@paul-moore.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20220502004952.3970800-1-tweek@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stephen Boyd [Wed, 27 Apr 2022 01:32:26 +0000 (18:32 -0700)]
interconnect: Restore sync state by ignoring ipa-virt in provider count
[ Upstream commit
20ce30fb4750f2ffc130cdcb26232b1dd87cd0a5 ]
Ignore compatible strings for the IPA virt drivers that were removed in
commits
2fb251c26560 ("interconnect: qcom: sdx55: Drop IP0
interconnects") and
2f3724930eb4 ("interconnect: qcom: sc7180: Drop IP0
interconnects") so that the sync state logic can kick in again.
Otherwise all the interconnects in the system will stay pegged at max
speeds because 'providers_count' is always going to be one larger than
the number of drivers that will ever probe on sc7180 or sdx55. This
fixes suspend on sc7180 and sdx55 devices when you don't have a
devicetree patch to remove the ipa-virt compatible node.
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Doug Anderson <dianders@chromium.org>
Cc: Alex Elder <elder@linaro.org>
Cc: Taniya Das <quic_tdas@quicinc.com>
Cc: Mike Tipton <quic_mdtipton@quicinc.com>
Fixes: 2fb251c26560 ("interconnect: qcom: sdx55: Drop IP0 interconnects")
Fixes: 2f3724930eb4 ("interconnect: qcom: sc7180: Drop IP0 interconnects")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20220427013226.341209-1-swboyd@chromium.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Willy Tarreau [Mon, 2 May 2022 08:46:14 +0000 (10:46 +0200)]
tcp: drop the hash_32() part from the index calculation
[ Upstream commit
e8161345ddbb66e449abde10d2fdce93f867eba9 ]
In commit
190cc82489f4 ("tcp: change source port randomizarion at
connect() time"), the table_perturb[] array was introduced and an
index was taken from the port_offset via hash_32(). But it turns
out that hash_32() performs a multiplication while the input here
comes from the output of SipHash in secure_seq, that is well
distributed enough to avoid the need for yet another hash.
Suggested-by: Amit Klein <aksecurity@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Willy Tarreau [Mon, 2 May 2022 08:46:13 +0000 (10:46 +0200)]
tcp: increase source port perturb table to 2^16
[ Upstream commit
4c2c8f03a5ab7cb04ec64724d7d176d00bcc91e5 ]
Moshe Kol, Amit Klein, and Yossi Gilad reported being able to accurately
identify a client by forcing it to emit only 40 times more connections
than there are entries in the table_perturb[] table. The previous two
improvements consisting in resalting the secret every 10s and adding
randomness to each port selection only slightly improved the situation,
and the current value of 2^8 was too small as it's not very difficult
to make a client emit 10k connections in less than 10 seconds.
Thus we're increasing the perturb table from 2^8 to 2^16 so that the
same precision now requires 2.6M connections, which is more difficult in
this time frame and harder to hide as a background activity. The impact
is that the table now uses 256 kB instead of 1 kB, which could mostly
affect devices making frequent outgoing connections. However such
components usually target a small set of destinations (load balancers,
database clients, perf assessment tools), and in practice only a few
entries will be visited, like before.
A live test at 1 million connections per second showed no performance
difference from the previous value.
Reported-by: Moshe Kol <moshe.kol@mail.huji.ac.il>
Reported-by: Yossi Gilad <yossi.gilad@mail.huji.ac.il>
Reported-by: Amit Klein <aksecurity@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Willy Tarreau [Mon, 2 May 2022 08:46:12 +0000 (10:46 +0200)]
tcp: dynamically allocate the perturb table used by source ports
[ Upstream commit
e9261476184be1abd486c9434164b2acbe0ed6c2 ]
We'll need to further increase the size of this table and it's likely
that at some point its size will not be suitable anymore for a static
table. Let's allocate it on boot from inet_hashinfo2_init(), which is
called from tcp_init().
Cc: Moshe Kol <moshe.kol@mail.huji.ac.il>
Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il>
Cc: Amit Klein <aksecurity@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Willy Tarreau [Mon, 2 May 2022 08:46:11 +0000 (10:46 +0200)]
tcp: add small random increments to the source port
[ Upstream commit
ca7af0402550f9a0b3316d5f1c30904e42ed257d ]
Here we're randomly adding between 0 and 7 random increments to the
selected source port in order to add some noise in the source port
selection that will make the next port less predictable.
With the default port range of 32768-60999 this means a worst case
reuse scenario of 14116/8=1764 connections between two consecutive
uses of the same port, with an average of 14116/4.5=3137. This code
was stressed at more than 800000 connections per second to a fixed
target with all connections closed by the client using RSTs (worst
condition) and only 2 connections failed among 13 billion, despite
the hash being reseeded every 10 seconds, indicating a perfectly
safe situation.
Cc: Moshe Kol <moshe.kol@mail.huji.ac.il>
Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il>
Cc: Amit Klein <aksecurity@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Mon, 2 May 2022 08:46:10 +0000 (10:46 +0200)]
tcp: resalt the secret every 10 seconds
[ Upstream commit
4dfa9b438ee34caca4e6a4e5e961641807367f6f ]
In order to limit the ability for an observer to recognize the source
ports sequence used to contact a set of destinations, we should
periodically shuffle the secret. 10 seconds looks effective enough
without causing particular issues.
Cc: Moshe Kol <moshe.kol@mail.huji.ac.il>
Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il>
Cc: Amit Klein <aksecurity@gmail.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Willy Tarreau [Mon, 2 May 2022 08:46:09 +0000 (10:46 +0200)]
tcp: use different parts of the port_offset for index and offset
[ Upstream commit
9e9b70ae923baf2b5e8a0ea4fd0c8451801ac526 ]
Amit Klein suggests that we use different parts of port_offset for the
table's index and the port offset so that there is no direct relation
between them.
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Moshe Kol <moshe.kol@mail.huji.ac.il>
Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il>
Cc: Amit Klein <aksecurity@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Willy Tarreau [Mon, 2 May 2022 08:46:08 +0000 (10:46 +0200)]
secure_seq: use the 64 bits of the siphash for port offset calculation
[ Upstream commit
b2d057560b8107c633b39aabe517ff9d93f285e3 ]
SipHash replaced MD5 in secure_ipv{4,6}_port_ephemeral() via commit
7cd23e5300c1 ("secure_seq: use SipHash in place of MD5"), but the output
remained truncated to 32-bit only. In order to exploit more bits from the
hash, let's make the functions return the full 64-bit of siphash_3u32().
We also make sure the port offset calculation in __inet_hash_connect()
remains done on 32-bit to avoid the need for div_u64_rem() and an extra
cost on 32-bit systems.
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Moshe Kol <moshe.kol@mail.huji.ac.il>
Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il>
Cc: Amit Klein <aksecurity@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Matthew Hagan [Mon, 2 May 2022 22:33:15 +0000 (23:33 +0100)]
net: sfp: Add tx-fault workaround for Huawei MA5671A SFP ONT
[ Upstream commit
2069624dac19d62c558bb6468fe03678553ab01d ]
As noted elsewhere, various GPON SFP modules exhibit non-standard
TX-fault behaviour. In the tested case, the Huawei MA5671A, when used
in combination with a Marvell mv88e6085 switch, was found to
persistently assert TX-fault, resulting in the module being disabled.
This patch adds a quirk to ignore the SFP_F_TX_FAULT state, allowing the
module to function.
Change from v1: removal of erroneous return statment (Andrew Lunn)
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220502223315.1973376-1-mnhagan88@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shravya Kumbham [Mon, 2 May 2022 07:27:49 +0000 (12:57 +0530)]
net: emaclite: Don't advertise 1000BASE-T and do auto negotiation
[ Upstream commit
b800528b97d0adc3a5ba42d78a8b0d3f07a31f44 ]
In xemaclite_open() function we are setting the max speed of
emaclite to 100Mb using phy_set_max_speed() function so,
there is no need to write the advertising registers to stop
giga-bit speed and the phy_start() function starts the
auto-negotiation so, there is no need to handle it separately
using advertising registers. Remove the phy_read and phy_write
of advertising registers in xemaclite_open() function.
Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ajit Kumar Pandey [Tue, 26 Apr 2022 18:33:57 +0000 (13:33 -0500)]
ASoC: SOF: Fix NULL pointer exception in sof_pci_probe callback
[ Upstream commit
c61711c1c95791850be48dd65a1d72eb34ba719f ]
We are accessing "desc->ops" in sof_pci_probe without checking "desc"
pointer. This results in NULL pointer exception if pci_id->driver_data
i.e desc pointer isn't defined in sof device probe:
BUG: kernel NULL pointer dereference, address:
0000000000000060
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:sof_pci_probe+0x1e/0x17f [snd_sof_pci]
Code: Unable to access opcode bytes at RIP 0xffffffffc043dff4.
RSP: 0018:
ffffac4b03b9b8d8 EFLAGS:
00010246
Add NULL pointer check for sof_dev_desc pointer to avoid such exception.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220426183357.102155-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sven Schnelle [Mon, 25 Apr 2022 12:17:42 +0000 (14:17 +0200)]
s390: disable -Warray-bounds
[ Upstream commit
8b202ee218395319aec1ef44f72043e1fbaccdd6 ]
gcc-12 shows a lot of array bound warnings on s390. This is caused
by the S390_lowcore macro which uses a hardcoded address of 0.
Wrapping that with absolute_pointer() works, but gcc no longer knows
that a 12 bit displacement is sufficient to access lowcore. So it
emits instructions like 'lghi %r1,0; l %rx,xxx(%r1)' instead of a
single load/store instruction. As s390 stores variables often
read/written in lowcore, this is considered problematic. Therefore
disable -Warray-bounds on s390 for gcc-12 for the time being, until
there is a better solution.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Link: https://lore.kernel.org/r/yt9dzgkelelc.fsf@linux.ibm.com
Link: https://lore.kernel.org/r/20220422134308.1613610-1-svens@linux.ibm.com
Link: https://lore.kernel.org/r/20220425121742.3222133-1-svens@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mark Brown [Sat, 23 Apr 2022 13:12:39 +0000 (14:12 +0100)]
ASoC: ops: Validate input values in snd_soc_put_volsw_range()
[ Upstream commit
aa22125c57f9e577f0a667e4fa07fc3fa8ca1e60 ]
Check that values written via snd_soc_put_volsw_range() are
within the range advertised by the control, ensuring that we
don't write out of spec values to the hardware.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220423131239.3375261-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mark Brown [Wed, 20 Apr 2022 19:34:54 +0000 (20:34 +0100)]
ASoC: max98090: Generate notifications on changes for custom control
[ Upstream commit
13fcf676d9e102594effc686d98521ff5c90b925 ]
The max98090 driver has some custom controls which share a put() function
which returns 0 unconditionally, meaning that events are not generated
when the value changes. Fix that.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220420193454.2647908-2-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mark Brown [Wed, 20 Apr 2022 19:34:53 +0000 (20:34 +0100)]
ASoC: max98090: Reject invalid values in custom control put()
[ Upstream commit
2fbe467bcbfc760a08f08475eea6bbd4c2874319 ]
The max98090 driver has a custom put function for some controls which can
only be updated in certain circumstances which makes no effort to validate
that input is suitable for the control, allowing out of spec values to be
written to the hardware and presented to userspace. Fix this by returning
an error when invalid values are written.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220420193454.2647908-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ashish Mhetre [Thu, 21 Apr 2022 08:15:04 +0000 (13:45 +0530)]
iommu: arm-smmu: disable large page mappings for Nvidia arm-smmu
[ Upstream commit
4a25f2ea0e030b2fc852c4059a50181bfc5b2f57 ]
Tegra194 and Tegra234 SoCs have the erratum that causes walk cache
entries to not be invalidated correctly. The problem is that the walk
cache index generated for IOVA is not same across translation and
invalidation requests. This is leading to page faults when PMD entry is
released during unmap and populated with new PTE table during subsequent
map request. Disabling large page mappings avoids the release of PMD
entry and avoid translations seeing stale PMD entry in walk cache.
Fix this by limiting the page mappings to PAGE_SIZE for Tegra194 and
Tegra234 devices. This is recommended fix from Tegra hardware design
team.
Acked-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Krishna Reddy <vdumpa@nvidia.com>
Co-developed-by: Pritesh Raithatha <praithatha@nvidia.com>
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>
Signed-off-by: Ashish Mhetre <amhetre@nvidia.com>
Link: https://lore.kernel.org/r/20220421081504.24678-1-amhetre@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Duoming Zhou [Mon, 18 Apr 2022 15:33:22 +0000 (23:33 +0800)]
RDMA/irdma: Fix deadlock in irdma_cleanup_cm_core()
[ Upstream commit
679ab61bf5f5f519377d812afb4fb93634782c74 ]
There is a deadlock in irdma_cleanup_cm_core(), which is shown below:
(Thread 1) | (Thread 2)
| irdma_schedule_cm_timer()
irdma_cleanup_cm_core() | add_timer()
spin_lock_irqsave() //(1) | (wait a time)
... | irdma_cm_timer_tick()
del_timer_sync() | spin_lock_irqsave() //(2)
(wait timer to stop) | ...
We hold cm_core->ht_lock in position (1) of thread 1 and use
del_timer_sync() to wait timer to stop, but timer handler also need
cm_core->ht_lock in position (2) of thread 2. As a result,
irdma_cleanup_cm_core() will block forever.
This patch removes the check of timer_pending() in
irdma_cleanup_cm_core(), because the del_timer_sync() function will just
return directly if there isn't a pending timer. As a result, the lock is
redundant, because there is no resource it could protect.
Link: https://lore.kernel.org/r/20220418153322.42524-1-duoming@zju.edu.cn
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ji-Ze Hong (Peter Hong) [Mon, 18 Apr 2022 09:07:06 +0000 (17:07 +0800)]
hwmon: (f71882fg) Fix negative temperature
[ Upstream commit
4aaaaf0f279836f06d3b9d0ffeec7a1e1a04ceef ]
All temperature of Fintek superio hwmonitor that using 1-byte reg will use
2's complement.
In show_temp()
temp = data->temp[nr] * 1000;
When data->temp[nr] read as 255, it indicate -1C, but this code will report
255C to userspace. It'll be ok when change to:
temp = ((s8)data->temp[nr]) * 1000;
Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com>
Link: https://lore.kernel.org/r/20220418090706.6339-1-hpeter+linux_kernel@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andreas Gruenbacher [Thu, 14 Apr 2022 15:52:39 +0000 (17:52 +0200)]
gfs2: Fix filesystem block deallocation for short writes
[ Upstream commit
d031a8866e709c9d1ee5537a321b6192b4d2dc5b ]
When a write cannot be carried out in full, gfs2_iomap_end() releases
blocks that have been allocated for this write but haven't been used.
To compute the end of the allocation, gfs2_iomap_end() incorrectly
rounded the end of the attempted write down to the next block boundary
to arrive at the end of the allocation. It would have to round up, but
the end of the allocation is also available as iomap->offset +
iomap->length, so just use that instead.
In addition, use round_up() for computing the start of the unused range.
Fixes: 64bc06bb32ee ("gfs2: iomap buffered write support")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zack Rusin [Wed, 2 Mar 2022 15:24:22 +0000 (10:24 -0500)]
drm/vmwgfx: Fix fencing on SVGAv3
[ Upstream commit
1d6595b4cd47acfd824550f48f10b54a6f0e93ee ]
Port of the vmwgfx to SVGAv3 lacked support for fencing. SVGAv3 removed
FIFO's and replaced them with command buffers and extra registers.
The initial version of SVGAv3 lacked support for most advanced features
(e.g. 3D) which made fences unnecessary. That is no longer the case,
especially as 3D support is being turned on.
Switch from FIFO commands and capabilities to command buffers and extra
registers to enable fences on SVGAv3.
Fixes: 2cd80dbd3551 ("drm/vmwgfx: Add basic support for SVGA3")
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302152426.885214-5-zack@kde.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Maxim Mikityanskiy [Thu, 12 May 2022 09:18:30 +0000 (12:18 +0300)]
tls: Fix context leak on tls_device_down
[ Upstream commit
3740651bf7e200109dd42d5b2fb22226b26f960a ]
The commit cited below claims to fix a use-after-free condition after
tls_device_down. Apparently, the description wasn't fully accurate. The
context stayed alive, but ctx->netdev became NULL, and the offload was
torn down without a proper fallback, so a bug was present, but a
different kind of bug.
Due to misunderstanding of the issue, the original patch dropped the
refcount_dec_and_test line for the context to avoid the alleged
premature deallocation. That line has to be restored, because it matches
the refcount_inc_not_zero from the same function, otherwise the contexts
that survived tls_device_down are leaked.
This patch fixes the described issue by restoring refcount_dec_and_test.
After this change, there is no leak anymore, and the fallback to
software kTLS still works.
Fixes: c55dcdd435aa ("net/tls: Fix use-after-free after the TLS device goes down and up")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20220512091830.678684-1-maximmi@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Taehee Yoo [Thu, 12 May 2022 05:47:09 +0000 (05:47 +0000)]
net: sfc: ef10: fix memory leak in efx_ef10_mtd_probe()
[ Upstream commit
1fa89ffbc04545b7582518e57f4b63e2a062870f ]
In the NIC ->probe() callback, ->mtd_probe() callback is called.
If NIC has 2 ports, ->probe() is called twice and ->mtd_probe() too.
In the ->mtd_probe(), which is efx_ef10_mtd_probe() it allocates and
initializes mtd partiion.
But mtd partition for sfc is shared data.
So that allocated mtd partition data from last called
efx_ef10_mtd_probe() will not be used.
Therefore it must be freed.
But it doesn't free a not used mtd partition data in efx_ef10_mtd_probe().
kmemleak reports:
unreferenced object 0xffff88811ddb0000 (size 63168):
comm "systemd-udevd", pid 265, jiffies
4294681048 (age 348.586s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<
ffffffffa3767749>] kmalloc_order_trace+0x19/0x120
[<
ffffffffa3873f0e>] __kmalloc+0x20e/0x250
[<
ffffffffc041389f>] efx_ef10_mtd_probe+0x11f/0x270 [sfc]
[<
ffffffffc0484c8a>] efx_pci_probe.cold.17+0x3df/0x53d [sfc]
[<
ffffffffa414192c>] local_pci_probe+0xdc/0x170
[<
ffffffffa4145df5>] pci_device_probe+0x235/0x680
[<
ffffffffa443dd52>] really_probe+0x1c2/0x8f0
[<
ffffffffa443e72b>] __driver_probe_device+0x2ab/0x460
[<
ffffffffa443e92a>] driver_probe_device+0x4a/0x120
[<
ffffffffa443f2ae>] __driver_attach+0x16e/0x320
[<
ffffffffa4437a90>] bus_for_each_dev+0x110/0x190
[<
ffffffffa443b75e>] bus_add_driver+0x39e/0x560
[<
ffffffffa4440b1e>] driver_register+0x18e/0x310
[<
ffffffffc02e2055>] 0xffffffffc02e2055
[<
ffffffffa3001af3>] do_one_initcall+0xc3/0x450
[<
ffffffffa33ca574>] do_init_module+0x1b4/0x700
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Fixes: 8127d661e77f ("sfc: Add support for Solarflare SFC9100 family")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://lore.kernel.org/r/20220512054709.12513-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guangguan Wang [Thu, 12 May 2022 03:08:20 +0000 (11:08 +0800)]
net/smc: non blocking recvmsg() return -EAGAIN when no data and signal_pending
[ Upstream commit
f3c46e41b32b6266cf60b0985c61748f53bf1c61 ]
Non blocking sendmsg will return -EAGAIN when any signal pending
and no send space left, while non blocking recvmsg return -EINTR
when signal pending and no data received. This may makes confused.
As TCP returns -EAGAIN in the conditions described above. Align the
behavior of smc with TCP.
Fixes: 846e344eb722 ("net/smc: add receive timeout check")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Link: https://lore.kernel.org/r/20220512030820.73848-1-guangguan.wang@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Florian Fainelli [Thu, 12 May 2022 02:17:31 +0000 (19:17 -0700)]
net: dsa: bcm_sf2: Fix Wake-on-LAN with mac_link_down()
[ Upstream commit
b7be130c5d52e5224ac7d89568737b37b4c4b785 ]
After commit
2d1f90f9ba83 ("net: dsa/bcm_sf2: fix incorrect usage of
state->link") the interface suspend path would call our mac_link_down()
call back which would forcibly set the link down, thus preventing
Wake-on-LAN packets from reaching our management port.
Fix this by looking at whether the port is enabled for Wake-on-LAN and
not clearing the link status in that case to let packets go through.
Fixes: 2d1f90f9ba83 ("net: dsa/bcm_sf2: fix incorrect usage of state->link")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220512021731.2494261-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / platform / kernel / linux-rpi.git / log