KVM: s390: Fix handle_sske page fault handling

[ Upstream commit 85f517b29418158d3e6e90c3f0fc01b306d2f1a1 ]

If handle_sske cannot set the storage key, because there is no
page table entry or no present large page entry, it calls
fixup_user_fault.
However, currently, if the call succeeds, handle_sske returns
-EAGAIN, without having set the storage key.
Instead, retry by continue'ing the loop without incrementing the
address.
The same issue in handle_pfmf was fixed by
a11bdb1a6b78 ("KVM: s390: Fix pfmf and conditional skey emulation").

Fixes: bd096f644319 ("KVM: s390: Add skey emulation fault handling")
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20211022152648.26536-1-scgl@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

samples/kretprobes: Fix return value if register_kretprobe() failed

[ Upstream commit f76fbbbb5061fe14824ba5807c44bd7400a6b4e1 ]

Use the actual return value instead of always -1 if register_kretprobe()
failed.

E.g. without this patch:

 # insmod samples/kprobes/kretprobe_example.ko func=no_such_func
 insmod: ERROR: could not insert module samples/kprobes/kretprobe_example.ko: Operation not permitted

With this patch:

 # insmod samples/kprobes/kretprobe_example.ko func=no_such_func
 insmod: ERROR: could not insert module samples/kprobes/kretprobe_example.ko: Unknown symbol in module

Link: https://lkml.kernel.org/r/1635213091-24387-2-git-send-email-yangtiezhu@loongson.cn
Fixes: 804defea1c02 ("Kprobes: move kprobe examples to samples/")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: spi-rpc-if: Check return value of rpcif_sw_init()

[ Upstream commit 0b0a281ed7001d4c4f4c47bdc84680c4997761ca ]

rpcif_sw_init() can fail so make sure we check the return value
of it and on error exit rpcif_spi_probe() callback with error code.

Fixes: eb8d6d464a27 ("spi: add Renesas RPC-IF driver")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20211025205631.21151-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: intel_pstate: Fix cpu->pstate.turbo_freq initialization

[ Upstream commit c72bcf0ab87a92634e58af62e89af0f40dfd0b88 ]

Fix a problem in active mode that cpu->pstate.turbo_freq is initialized
only if HWP-to-frequency scaling factor is refined.

In passive mode, this problem is not exposed, because
cpu->pstate.turbo_freq is set again, later in
intel_cpufreq_cpu_init()->intel_pstate_get_hwp_cap().

Fixes: eb3693f0521e ("cpufreq: intel_pstate: hybrid: CPU-specific scaling factor")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing: Fix missing trace_boot_init_histograms kstrdup NULL checks

[ Upstream commit 3c20bd3af535d64771b193bb4dd41ed662c464ce ]

trace_boot_init_histograms misses NULL pointer checks for kstrdup
failure.

Link: https://lkml.kernel.org/r/20211015195550.22742-1-mathieu.desnoyers@efficios.com
Fixes: 64dc7f6958ef5 ("tracing/boot: Show correct histogram error command")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: don't free a FIN sk_buff in tcp_remove_empty_skb()

[ Upstream commit cf12e6f9124629b18a6182deefc0315f0a73a199 ]

v1: Implement a more general statement as recommended by Eric Dumazet. The
sequence number will be advanced, so this check will fix the FIN case and
other cases.

A customer reported sockets stuck in the CLOSING state. A Vmcore revealed that
the write_queue was not empty as determined by tcp_write_queue_empty() but the
sk_buff containing the FIN flag had been freed and the socket was zombied in
that state. Corresponding pcaps show no FIN from the Linux kernel on the wire.

Some instrumentation was added to the kernel and it was found that there is a
timing window where tcp_sendmsg() can run after tcp_send_fin().

tcp_sendmsg() will hit an error, for example:

1269 ▹       if (sk->sk_err || (sk->sk_shutdown & SEND_SHUTDOWN))↩
1270 ▹       ▹       goto do_error;↩

tcp_remove_empty_skb() will then free the FIN sk_buff as "skb->len == 0". The
TCP socket is now wedged in the FIN-WAIT-1 state because the FIN is never sent.

If the other side sends a FIN packet the socket will transition to CLOSING and
remain that way until the system is rebooted.

Fix this by checking for the FIN flag in the sk_buff and don't free it if that
is the case. Testing confirmed that fixed the issue.

Fixes: fdfc5c8594c2 ("tcp: remove empty skb from write queue in error cases")
Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com>
Reported-by: Monir Zouaoui <Monir.Zouaoui@mail.schwarz>
Reported-by: Simon Stier <simon.stier@mail.schwarz>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libbpf: Fix endianness detection in BPF_CORE_READ_BITFIELD_PROBED()

[ Upstream commit 45f2bebc8079788f62f22d9e8b2819afb1789d7b ]

__BYTE_ORDER is supposed to be defined by a libc, and __BYTE_ORDER__ -
by a compiler. bpf_core_read.h checks __BYTE_ORDER == __LITTLE_ENDIAN,
which is true if neither are defined, leading to incorrect behavior on
big-endian hosts if libc headers are not included, which is often the
case.

Fixes: ee26dade0e3b ("libbpf: Add support for relocatable bitfields")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211026010831.748682-2-iii@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

tpm_tis_spi: Add missing SPI ID

[ Upstream commit 7eba41fe8c7bb01ff3d4b757bd622375792bc720 ]

In commit c46ed2281bbe ("tpm_tis_spi: add missing SPI device ID entries")
we added SPI IDs for all the DT aliases to handle the fact that we always
use SPI modaliases to load modules even when probed via DT however the
mentioned commit missed that the SPI and OF device ID entries did not
match and were different and so DT nodes with compatible
"tcg,tpm_tis-spi" will not match.  Add an extra ID for tpm_tis-spi
rather than just fix the existing one since what's currently there is
going to be better for anyone actually using SPI IDs to instantiate.

Fixes: c46ed2281bbe ("tpm_tis_spi: add missing SPI device ID entries")
Fixes: 96c8395e2166 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tpm: fix Atmel TPM crash caused by too frequent queries

[ Upstream commit 79ca6f74dae067681a779fd573c2eb59649989bc ]

The Atmel TPM 1.2 chips crash with error
`tpm_try_transmit: send(): error -62` since kernel 4.14.
It is observed from the kernel log after running `tpm_sealdata -z`.
The error thrown from the command is as follows
```
$ tpm_sealdata -z
Tspi_Key_LoadKey failed: 0x00001087 - layer=tddl,
code=0087 (135), I/O error
```

The issue was reproduced with the following Atmel TPM chip:
```
$ tpm_version
T0  TPM 1.2 Version Info:
  Chip Version:        1.2.66.1
  Spec Level:          2
  Errata Revision:     3
  TPM Vendor ID:       ATML
  TPM Version:         01010000
  Manufacturer Info:   41544d4c
```

The root cause of the issue is due to the TPM calls to msleep()
were replaced with usleep_range() [1], which reduces
the actual timeout. Via experiments, it is observed that
the original msleep(5) actually sleeps for 15ms.
Because of a known timeout issue in Atmel TPM 1.2 chip,
the shorter timeout than 15ms can cause the error described above.

A few further changes in kernel 4.16 [2] and 4.18 [3, 4] further
reduced the timeout to less than 1ms. With experiments,
the problematic timeout in the latest kernel is the one
for `wait_for_tpm_stat`.

To fix it, the patch reverts the timeout of `wait_for_tpm_stat`
to 15ms for all Atmel TPM 1.2 chips, but leave it untouched
for Ateml TPM 2.0 chip, and chips from other vendors.
As explained above, the chosen 15ms timeout is
the actual timeout before this issue introduced,
thus the old value is used here.
Particularly, TPM_ATML_TIMEOUT_WAIT_STAT_MIN is set to 14700us,
TPM_ATML_TIMEOUT_WAIT_STAT_MIN is set to 15000us according to
the existing TPM_TIMEOUT_RANGE_US (300us).
The fixed has been tested in the system with the affected Atmel chip
with no issues observed after boot up.

References:
[1] 9f3fc7bcddcb tpm: replace msleep() with usleep_range() in TPM
1.2/2.0 generic drivers
[2] cf151a9a44d5 tpm: reduce tpm polling delay in tpm_tis_core
[3] 59f5a6b07f64 tpm: reduce poll sleep time in tpm_transmit()
[4] 424eaf910c32 tpm: reduce polling time to usecs for even finer
granularity

Fixes: 9f3fc7bcddcb ("tpm: replace msleep() with usleep_range() in TPM 1.2/2.0 generic drivers")
Link: https://patchwork.kernel.org/project/linux-integrity/patch/20200926223150.109645-1-hao.wu@rubrik.com/
Signed-off-by: Hao Wu <hao.wu@rubrik.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libbpf: Fix off-by-one bug in bpf_core_apply_relo()

[ Upstream commit de5d0dcef602de39070c31c7e56c58249c56ba37 ]

Fix instruction index validity check which has off-by-one error.

Fixes: 3ee4f5335511 ("libbpf: Split bpf_core_apply_relo() into bpf_program independent helper.")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211025224531.1088894-2-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

blk-cgroup: synchronize blkg creation against policy deactivation

[ Upstream commit 0c9d338c8443b06da8e8d3bfce824c5ea6d3488f ]

Our test reports a null pointer dereference:

[  168.534653] ==================================================================
[  168.535614] Disabling lock debugging due to kernel taint
[  168.536346] BUG: kernel NULL pointer dereference, address: 0000000000000008
[  168.537274] #PF: supervisor read access in kernel mode
[  168.537964] #PF: error_code(0x0000) - not-present page
[  168.538667] PGD 0 P4D 0
[  168.539025] Oops: 0000 [#1] PREEMPT SMP KASAN
[  168.539656] CPU: 13 PID: 759 Comm: bash Tainted: G    B             5.15.0-rc2-next-202100
[  168.540954] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_0738364
[  168.542736] RIP: 0010:bfq_pd_init+0x88/0x1e0
[  168.543318] Code: 98 00 00 00 e8 c9 e4 5b ff 4c 8b 65 00 49 8d 7c 24 08 e8 bb e4 5b ff 4d0
[  168.545803] RSP: 0018:ffff88817095f9c0 EFLAGS: 00010002
[  168.546497] RAX: 0000000000000001 RBX: ffff888101a1c000 RCX: 0000000000000000
[  168.547438] RDX: 0000000000000003 RSI: 0000000000000002 RDI: ffff888106553428
[  168.548402] RBP: ffff888106553400 R08: ffffffff961bcaf4 R09: 0000000000000001
[  168.549365] R10: ffffffffa2e16c27 R11: fffffbfff45c2d84 R12: 0000000000000000
[  168.550291] R13: ffff888101a1c098 R14: ffff88810c7a08c8 R15: ffffffffa55541a0
[  168.551221] FS:  00007fac75227700(0000) GS:ffff88839ba80000(0000) knlGS:0000000000000000
[  168.552278] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  168.553040] CR2: 0000000000000008 CR3: 0000000165ce7000 CR4: 00000000000006e0
[  168.554000] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  168.554929] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  168.555888] Call Trace:
[  168.556221]  <TASK>
[  168.556510]  blkg_create+0x1c0/0x8c0
[  168.556989]  blkg_conf_prep+0x574/0x650
[  168.557502]  ? stack_trace_save+0x99/0xd0
[  168.558033]  ? blkcg_conf_open_bdev+0x1b0/0x1b0
[  168.558629]  tg_set_conf.constprop.0+0xb9/0x280
[  168.559231]  ? kasan_set_track+0x29/0x40
[  168.559758]  ? kasan_set_free_info+0x30/0x60
[  168.560344]  ? tg_set_limit+0xae0/0xae0
[  168.560853]  ? do_sys_openat2+0x33b/0x640
[  168.561383]  ? do_sys_open+0xa2/0x100
[  168.561877]  ? __x64_sys_open+0x4e/0x60
[  168.562383]  ? __kasan_check_write+0x20/0x30
[  168.562951]  ? copyin+0x48/0x70
[  168.563390]  ? _copy_from_iter+0x234/0x9e0
[  168.563948]  tg_set_conf_u64+0x17/0x20
[  168.564467]  cgroup_file_write+0x1ad/0x380
[  168.565014]  ? cgroup_file_poll+0x80/0x80
[  168.565568]  ? __mutex_lock_slowpath+0x30/0x30
[  168.566165]  ? pgd_free+0x100/0x160
[  168.566649]  kernfs_fop_write_iter+0x21d/0x340
[  168.567246]  ? cgroup_file_poll+0x80/0x80
[  168.567796]  new_sync_write+0x29f/0x3c0
[  168.568314]  ? new_sync_read+0x410/0x410
[  168.568840]  ? __handle_mm_fault+0x1c97/0x2d80
[  168.569425]  ? copy_page_range+0x2b10/0x2b10
[  168.570007]  ? _raw_read_lock_bh+0xa0/0xa0
[  168.570622]  vfs_write+0x46e/0x630
[  168.571091]  ksys_write+0xcd/0x1e0
[  168.571563]  ? __x64_sys_read+0x60/0x60
[  168.572081]  ? __kasan_check_write+0x20/0x30
[  168.572659]  ? do_user_addr_fault+0x446/0xff0
[  168.573264]  __x64_sys_write+0x46/0x60
[  168.573774]  do_syscall_64+0x35/0x80
[  168.574264]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[  168.574960] RIP: 0033:0x7fac74915130
[  168.575456] Code: 73 01 c3 48 8b 0d 58 ed 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 444
[  168.577969] RSP: 002b:00007ffc3080e288 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[  168.578986] RAX: ffffffffffffffda RBX: 0000000000000009 RCX: 00007fac74915130
[  168.579937] RDX: 0000000000000009 RSI: 000056007669f080 RDI: 0000000000000001
[  168.580884] RBP: 000056007669f080 R08: 000000000000000a R09: 00007fac75227700
[  168.581841] R10: 000056007655c8f0 R11: 0000000000000246 R12: 0000000000000009
[  168.582796] R13: 0000000000000001 R14: 00007fac74be55e0 R15: 00007fac74be08c0
[  168.583757]  </TASK>
[  168.584063] Modules linked in:
[  168.584494] CR2: 0000000000000008
[  168.584964] ---[ end trace 2475611ad0f77a1a ]---

This is because blkg_alloc() is called from blkg_conf_prep() without
holding 'q->queue_lock', and elevator is exited before blkg_create():

thread 1                            thread 2
blkg_conf_prep
 spin_lock_irq(&q->queue_lock);
 blkg_lookup_check -> return NULL
 spin_unlock_irq(&q->queue_lock);

 blkg_alloc
  blkcg_policy_enabled -> true
  pd = ->pd_alloc_fn
  blkg->pd[i] = pd
                                   blk_mq_exit_sched
                                    bfq_exit_queue
                                     blkcg_deactivate_policy
                                      spin_lock_irq(&q->queue_lock);
                                      __clear_bit(pol->plid, q->blkcg_pols);
                                      spin_unlock_irq(&q->queue_lock);
                                    q->elevator = NULL;
  spin_lock_irq(&q->queue_lock);
   blkg_create
    if (blkg->pd[i])
     ->pd_init_fn -> q->elevator is NULL
  spin_unlock_irq(&q->queue_lock);

Because blkcg_deactivate_policy() requires queue to be frozen, we can
grab q_usage_counter to synchoronize blkg_conf_prep() against
blkcg_deactivate_policy().

Fixes: e21b7a0b9887 ("block, bfq: add full hierarchical scheduling and cgroups support")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20211020014036.2141723-1-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block: ataflop: more blk-mq refactoring fixes

[ Upstream commit d28e4dff085c5a87025c9a0a85fb798bd8e9ca17 ]

As it turns out, my earlier patch in commit 86d46fdaa12a (block:
ataflop: fix breakage introduced at blk-mq refactoring) was
incomplete. This patch fixes any remaining issues found during
more testing and code review.

Requests exceeding 4 k are handled in 4k segments but
__blk_mq_end_request() is never called on these (still
sectors outstanding on the request). With redo_fd_request()
removed, there is no provision to kick off processing of the
next segment, causing requests exceeding 4k to hang. (By
setting /sys/block/fd0/queue/max_sectors_k <= 4 as workaround,
this behaviour can be avoided).

Instead of reintroducing redo_fd_request(), requeue the remainder
of the request by calling blk_mq_requeue_request() on incomplete
requests (i.e. when blk_update_request() still returns true), and
rely on the block layer to queue the residual as new request.

Both error handling and formatting needs to release the
ST-DMA lock, so call finish_fdc() on these (this was previously
handled by redo_fd_request()). finish_fdc() may be called
legitimately without the ST-DMA lock held - make sure we only
release the lock if we actually held it. In a similar way,
early exit due to errors in ataflop_queue_rq() must release
the lock.

After minor errors, fd_error sets up to recalibrate the drive
but never re-runs the current operation (another task handled by
redo_fd_request() before). Call do_fd_action() to get the next
steps (seek, retry read/write) underway.

Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Fixes: 6ec3938cff95f (ataflop: convert to blk-mq)
CC: linux-block@vger.kernel.org
Link: https://lore.kernel.org/r/20211024002013.9332-1-schmitzmic@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath10k: fix module load regression with iram-recovery feature

[ Upstream commit 6f8c8bf4c7c9be1c42088689fd4370e06b46608a ]

Commit 9af7c32ceca8 ("ath10k: add target IRAM recovery feature support")
introduced a new firmware feature flag ATH10K_FW_FEATURE_IRAM_RECOVERY. But
this caused ath10k_pci module load to fail if ATH10K_FW_CRASH_DUMP_RAM_DATA bit
was not enabled in the ath10k coredump_mask module parameter:

[ 2209.328190] ath10k_pci 0000:02:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
[ 2209.434414] ath10k_pci 0000:02:00.0: kconfig debug 1 debugfs 1 tracing 1 dfs 1 testmode 1
[ 2209.547191] ath10k_pci 0000:02:00.0: firmware ver 10.4-3.9.0.2-00099 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps,peer-fixed-rate,iram-recovery crc32 cbade90a
[ 2210.896485] ath10k_pci 0000:02:00.0: board_file api 1 bmi_id 0:1 crc32 a040efc2
[ 2213.603339] ath10k_pci 0000:02:00.0: failed to copy target iram contents: -12
[ 2213.839027] ath10k_pci 0000:02:00.0: could not init core (-12)
[ 2213.933910] ath10k_pci 0000:02:00.0: could not probe fw (-12)

And by default coredump_mask does not have ATH10K_FW_CRASH_DUMP_RAM_DATA
enabled so anyone using a firmware with iram-recovery feature would fail. To my
knowledge only QCA9984 firmwares starting from release 10.4-3.9.0.2-00099
enabled the feature.

The reason for regression was that ath10k_core_copy_target_iram() used
ath10k_coredump_get_mem_layout() to get the memory layout, but when
ATH10K_FW_CRASH_DUMP_RAM_DATA was disabled it would get just NULL and bail out
with an error.

While looking at all this I noticed another bug: if CONFIG_DEV_COREDUMP is
disabled but the firmware has iram-recovery enabled the module load fails with
similar error messages. I fixed that by returning 0 from
ath10k_core_copy_target_iram() when _ath10k_coredump_get_mem_layout() returns
NULL.

Tested-on: QCA9984 hw2.0 PCI 10.4-3.9.0.2-00139

Fixes: 9af7c32ceca8 ("ath10k: add target IRAM recovery feature support")
Signed-off-by: Abinaya Kalaiselvan <akalaise@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211020075054.23061-1-kvalo@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 9142/1: kasan: work around LPAE build warning

[ Upstream commit c2e6df3eaaf120cde5e7c3a70590dd82e427458a ]

pgd_page_vaddr() returns an 'unsigned long' address, causing a warning
with the memcpy() call in kasan_init():

arch/arm/mm/kasan_init.c: In function 'kasan_init':
include/asm-generic/pgtable-nop4d.h:44:50: error: passing argument 2 of '__memcpy' makes pointer from integer without a cast [-Werror=int-conversion]
   44 | #define pgd_page_vaddr(pgd)                     ((unsigned long)(p4d_pgtable((p4d_t){ pgd })))
      |                                                 ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      |                                                  |
      |                                                  long unsigned int
arch/arm/include/asm/string.h:58:45: note: in definition of macro 'memcpy'
   58 | #define memcpy(dst, src, len) __memcpy(dst, src, len)
      |                                             ^~~
arch/arm/mm/kasan_init.c:229:16: note: in expansion of macro 'pgd_page_vaddr'
  229 |                pgd_page_vaddr(*pgd_offset_k(KASAN_SHADOW_START)),
      |                ^~~~~~~~~~~~~~
arch/arm/include/asm/string.h:21:47: note: expected 'const void *' but argument is of type 'long unsigned int'
   21 | extern void *__memcpy(void *dest, const void *src, __kernel_size_t n);
      |                                   ~~~~~~~~~~~~^~~

Avoid this by adding an explicit typecast.

Link: https://lore.kernel.org/all/CACRpkdb3DMvof3-xdtss0Pc6KM36pJA-iy=WhvtNVnsDpeJ24Q@mail.gmail.com/
Fixes: 5615f69bc209 ("ARM: 9016/2: Initialize the mapping of KASan shadow memory")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: avoid refcount warnings when ->port_{fdb,mdb}_del returns error

[ Upstream commit 232deb3f9567ce37d99b8616a6c07c1fc0436abf ]

At present, when either of ds->ops->port_fdb_del() or ds->ops->port_mdb_del()
return a non-zero error code, we attempt to save the day and keep the
data structure associated with that switchdev object, as the deletion
procedure did not complete.

However, the way in which we do this is suspicious to the checker in
lib/refcount.c, who thinks it is buggy to increment a refcount that
became zero, and that this is indicative of a use-after-free.

Fixes: 161ca59d39e9 ("net: dsa: reference count the MDB entries at the cross-chip notifier level")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

irq: mips: avoid nested irq_enter()

[ Upstream commit c65b52d02f6c1a06ddb20cba175ad49eccd6410d ]

As bcm6345_l1_irq_handle() is a chained irqchip handler, it will be
invoked within the context of the root irqchip handler, which must have
entered IRQ context already.

When bcm6345_l1_irq_handle() calls arch/mips's do_IRQ() , this will nest
another call to irq_enter(), and the resulting nested increment to
`rcu_data.dynticks_nmi_nesting` will cause rcu_is_cpu_rrupt_from_idle()
to fail to identify wakeups from idle, resulting in failure to preempt,
and RCU stalls.

Chained irqchip handlers must invoke IRQ handlers by way of thee core
irqchip code, i.e. generic_handle_irq() or generic_handle_domain_irq()
and should not call do_IRQ(), which is intended only for root irqchip
handlers.

Fix bcm6345_l1_irq_handle() by calling generic_handle_irq() directly.

Fixes: c7c42ec2baa1de7a ("irqchips/bmips: Add bcm6345-l1 interrupt controller")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: s390: pv: avoid stalls for kvm_s390_pv_init_vm

[ Upstream commit 1e2aa46de526a5adafe580bca4c25856bb06f09e ]

When the system is heavily overcommitted, kvm_s390_pv_init_vm might
generate stall notifications.

Fix this by using uv_call_sched instead of just uv_call. This is ok because
we are not holding spinlocks.

Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Fixes: 214d9bbcd3a672 ("s390/mm: provide memory management functions for protected KVM guests")
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20210920132502.36111-4-imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: s390: pv: avoid double free of sida page

[ Upstream commit d4074324b07a94a1fca476d452dfbb3a4e7bf656 ]

If kvm_s390_pv_destroy_cpu is called more than once, we risk calling
free_page on a random page, since the sidad field is aliased with the
gbea, which is not guaranteed to be zero.

This can happen, for example, if userspace calls the KVM_PV_DISABLE
IOCTL, and it fails, and then userspace calls the same IOCTL again.
This scenario is only possible if KVM has some serious bug or if the
hardware is broken.

The solution is to simply return successfully immediately if the vCPU
was already non secure.

Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Fixes: 19e1227768863a1469797c13ef8fea1af7beac2c ("KVM: S390: protvirt: Introduce instruction data area bounce buffer")
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20210920132502.36111-3-imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/uv: fully validate the VMA before calling follow_page()

[ Upstream commit 46c22ffd2772201662350bc7b94b9ea9d3ee5ac2 ]

We should not walk/touch page tables outside of VMA boundaries when
holding only the mmap sem in read mode. Evil user space can modify the
VMA layout just before this function runs and e.g., trigger races with
page table removal code since commit dd2283f2605e ("mm: mmap: zap pages
with read mmap_sem in munmap").

find_vma() does not check if the address is >= the VMA start address;
use vma_lookup() instead.

Fixes: 214d9bbcd3a6 ("s390/mm: provide memory management functions for protected KVM guests")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Link: https://lore.kernel.org/r/20210909162248.14969-6-david@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/mm: fix VMA and page table handling code in storage key handling functions

[ Upstream commit 949f5c1244ee6c36d2e81c588d1200eaa83a3df6 ]

There are multiple things broken about our storage key handling
functions:

1. We should not walk/touch page tables outside of VMA boundaries when
   holding only the mmap sem in read mode. Evil user space can modify the
   VMA layout just before this function runs and e.g., trigger races with
   page table removal code since commit dd2283f2605e ("mm: mmap: zap pages
   with read mmap_sem in munmap"). gfn_to_hva() will only translate using
   KVM memory regions, but won't validate the VMA.

2. We should not allocate page tables outside of VMA boundaries: if
   evil user space decides to map hugetlbfs to these ranges, bad things
   will happen because we suddenly have PTE or PMD page tables where we
   shouldn't have them.

3. We don't handle large PUDs that might suddenly appeared inside our page
   table hierarchy.

Don't manually allocate page tables, properly validate that we have VMA and
bail out on pud_large().

All callers of page table handling functions, except
get_guest_storage_key(), call fixup_user_fault() in case they
receive an -EFAULT and retry; this will allocate the necessary page tables
if required.

To keep get_guest_storage_key() working as expected and not requiring
kvm_s390_get_skeys() to call fixup_user_fault() distinguish between
"there is simply no page table or huge page yet and the key is assumed
to be 0" and "this is a fault to be reported".

Although commit 637ff9efe5ea ("s390/mm: Add huge pmd storage key handling")
introduced most of the affected code, it was actually already broken
before when using get_locked_pte() without any VMA checks.

Note: Ever since commit 637ff9efe5ea ("s390/mm: Add huge pmd storage key
handling") we can no longer set a guest storage key (for example from
QEMU during VM live migration) without actually resolving a fault.
Although we would have created most page tables, we would choke on the
!pmd_present(), requiring a call to fixup_user_fault(). I would
have thought that this is problematic in combination with postcopy life
migration ... but nobody noticed and this patch doesn't change the
situation. So maybe it's just fine.

Fixes: 9fcf93b5de06 ("KVM: S390: Create helper function get_guest_storage_key")
Fixes: 24d5dd0208ed ("s390/kvm: Provide function for setting the guest storage key")
Fixes: a7e19ab55ffd ("KVM: s390: handle missing storage-key facility")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20210909162248.14969-5-david@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/mm: validate VMA in PGSTE manipulation functions

[ Upstream commit fe3d10024073f06f04c74b9674bd71ccc1d787cf ]

We should not walk/touch page tables outside of VMA boundaries when
holding only the mmap sem in read mode. Evil user space can modify the
VMA layout just before this function runs and e.g., trigger races with
page table removal code since commit dd2283f2605e ("mm: mmap: zap pages
with read mmap_sem in munmap"). gfn_to_hva() will only translate using
KVM memory regions, but won't validate the VMA.

Further, we should not allocate page tables outside of VMA boundaries: if
evil user space decides to map hugetlbfs to these ranges, bad things will
happen because we suddenly have PTE or PMD page tables where we
shouldn't have them.

Similarly, we have to check if we suddenly find a hugetlbfs VMA, before
calling get_locked_pte().

Fixes: 2d42f9477320 ("s390/kvm: Add PGSTE manipulation functions")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20210909162248.14969-4-david@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/gmap: don't unconditionally call pte_unmap_unlock() in __gmap_zap()

[ Upstream commit b159f94c86b43cf7e73e654bc527255b1f4eafc4 ]

... otherwise we will try unlocking a spinlock that was never locked via a
garbage pointer.

At the time we reach this code path, we usually successfully looked up
a PGSTE already; however, evil user space could have manipulated the VMA
layout in the meantime and triggered removal of the page table.

Fixes: 1e133ab296f3 ("s390/mm: split arch/s390/mm/pgtable.c")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20210909162248.14969-3-david@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/gmap: validate VMA in __gmap_zap()

[ Upstream commit 2d8fb8f3914b40e3cc12f8cbb74daefd5245349d ]

We should not walk/touch page tables outside of VMA boundaries when
holding only the mmap sem in read mode. Evil user space can modify the
VMA layout just before this function runs and e.g., trigger races with
page table removal code since commit dd2283f2605e ("mm: mmap: zap pages
with read mmap_sem in munmap"). The pure prescence in our guest_to_host
radix tree does not imply that there is a VMA.

Further, we should not allocate page tables (via get_locked_pte()) outside
of VMA boundaries: if evil user space decides to map hugetlbfs to these
ranges, bad things will happen because we suddenly have PTE or PMD page
tables where we shouldn't have them.

Similarly, we have to check if we suddenly find a hugetlbfs VMA, before
calling get_locked_pte().

Note that gmap_discard() is different:
zap_page_range()->unmap_single_vma() makes sure to stay within VMA
boundaries.

Fixes: b31288fa83b2 ("s390/kvm: support collaborative memory management")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20210909162248.14969-2-david@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7615: mt7622: fix ibss and meshpoint

[ Upstream commit 753453afacc0243bd45de45e34218a8d17493e8f ]

commit 7f4b7920318b ("mt76: mt7615: add ibss support") introduced IBSS
and commit f4ec7fdf7f83 ("mt76: mt7615: enable support for mesh")
meshpoint support.

Both used in the "get_omac_idx"-function:

if (~mask & BIT(HW_BSSID_0))
return HW_BSSID_0;

With commit d8d59f66d136 ("mt76: mt7615: support 16 interfaces") the
ibss and meshpoint mode should "prefer hw bssid slot 1-3". However,
with that change the ibss or meshpoint mode will not send any beacon on
the mt7622 wifi anymore. Devices were still able to exchange data but
only if a bssid already existed. Two mt7622 devices will never be able
to communicate.

This commits reverts the preferation of slot 1-3 for ibss and
meshpoint. Only NL80211_IFTYPE_STATION will still prefer slot 1-3.

Tested on Banana Pi R64.

Fixes: d8d59f66d136 ("mt76: mt7615: support 16 interfaces")
Signed-off-by: Nick Hainke <vincent@systemli.org>
Acked-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211007225725.2615-1-vincent@systemli.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

libbpf: Fix BTF header parsing checks

[ Upstream commit c825f5fee19caf301d9821cd79abaa734322de26 ]

Original code assumed fixed and correct BTF header length. That's not
always the case, though, so fix this bug with a proper additional check.
And use actual header length instead of sizeof(struct btf_header) in
sanity checks.

Fixes: 8a138aed4a80 ("bpf: btf: Add BTF support to libbpf")
Reported-by: Evgeny Vereshchagin <evvers@ya.ru>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211023003157.726961-2-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

libbpf: Fix overflow in BTF sanity checks

[ Upstream commit 5245dafe3d49efba4d3285cf27ee1cc1eeafafc6 ]

btf_header's str_off+str_len or type_off+type_len can overflow as they
are u32s. This will lead to bypassing the sanity checks during BTF
parsing, resulting in crashes afterwards. Fix by using 64-bit signed
integers for comparison.

Fixes: d8123624506c ("libbpf: Fix BTF data layout checks and allow empty BTF")
Reported-by: Evgeny Vereshchagin <evvers@ya.ru>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211023003157.726961-1-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpftool: Avoid leaking the JSON writer prepared for program metadata

[ Upstream commit e89ef634f81c9d90e1824ab183721f3b361472e6 ]

Bpftool creates a new JSON object for writing program metadata in plain
text mode, regardless of metadata being present or not. Then this writer
is freed if any metadata has been found and printed, but it leaks
otherwise. We cannot destroy the object unconditionally, because the
destructor prints an undesirable line break. Instead, make sure the
writer is created only after we have found program metadata to print.

Found with valgrind.

Fixes: aff52e685eb3 ("bpftool: Support dumping metadata")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211022094743.11052-1-quentin@isovalent.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

libbpf: Fix memory leak in btf__dedup()

[ Upstream commit 1000298c76830bc291358e98e8fa5baa3baa9b3a ]

Free btf_dedup if btf_ensure_modifiable() returns error.

Fixes: 919d2b1dbb07 ("libbpf: Allow modification of BTF and add btf__add_str API")
Signed-off-by: Mauricio Vásquez <mauricio@kinvolk.io>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211022202035.48868-1-mauricio@kinvolk.io
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: selftests: Fix nested SVM tests when built with clang

[ Upstream commit ed290e1c20da19fa100a3e0f421aa31b65984960 ]

Though gcc conveniently compiles a simple memset to "rep stos," clang
prefers to call the libc version of memset. If a test is dynamically
linked, the libc memset isn't available in L1 (nor is the PLT or the
GOT, for that matter). Even if the test is statically linked, the libc
memset may choose to use some CPU features, like AVX, which may not be
enabled in L1. Note that __builtin_memset doesn't solve the problem,
because (a) the compiler is free to call memset anyway, and (b)
__builtin_memset may also choose to use features like AVX, which may
not be available in L1.

To avoid a myriad of problems, use an explicit "rep stos" to clear the
VMCB in generic_svm_setup(), which is called both from L0 and L1.

Reported-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Fixes: 20ba262f8631a ("selftests: KVM: AMD Nested test infrastructure")
Message-Id: <20210930003649.4026553-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

smackfs: use netlbl_cfg_cipsov4_del() for deleting cipso_v4_doi

[ Upstream commit 0934ad42bb2c5df90a1b9de690f93de735b622fe ]

syzbot is reporting UAF at cipso_v4_doi_search() [1], for smk_cipso_doi()
is calling kfree() without removing from the cipso_v4_doi_list list after
netlbl_cfg_cipsov4_map_add() returned an error. We need to use
netlbl_cfg_cipsov4_del() in order to remove from the list and wait for
RCU grace period before kfree().

Link: https://syzkaller.appspot.com/bug?extid=93dba5b91f0fed312cbd
Reported-by: syzbot <syzbot+93dba5b91f0fed312cbd@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 6c2e8ac0953fccdd ("netlabel: Update kernel configuration API")
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: tcrypt - fix skcipher multi-buffer tests for 1420B blocks

[ Upstream commit 3ae88f676aa63366ffa9eebb8ae787c7e19f0c57 ]

Commit ad6d66bcac77e ("crypto: tcrypt - include 1420 byte blocks in aead and skcipher benchmarks")
mentions:
> power-of-2 block size. So let's add 1420 bytes explicitly, and round
> it up to the next blocksize multiple of the algo in question if it
> does not support 1420 byte blocks.
but misses updating skcipher multi-buffer tests.

Fix this by using the proper (rounded) input size.

Fixes: ad6d66bcac77e ("crypto: tcrypt - include 1420 byte blocks in aead and skcipher benchmarks")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dsi: fix wrong type in msm_dsi_host

[ Upstream commit 409af447c2a0a6e08ba190993a1153c91d3b11bd ]

Change byte_clk_rate, pixel_clk_rate, esc_clk_rate, and src_clk_rate
from u32 to unsigned long, since clk_get_rate() returns an unsigned long.

Fixes: a6bcddbc2ee1 ("drm/msm: dsi: Handle dual-channel for 6G as well")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jessica Zhang <jesszhan@codeaurora.org>
Link: https://lore.kernel.org/r/20211020183438.32263-1-jesszhan@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm: Fix potential NULL dereference in DPU SSPP

[ Upstream commit 8bf71a5719b6cc5b6ba358096081e5d50ea23ab6 ]

Move initialization of sblk in _sspp_subblk_offset() after NULL check to
avoid potential NULL pointer dereference.

Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jessica Zhang <jesszhan@codeaurora.org>
Link: https://lore.kernel.org/r/20211020175733.3379-1-jesszhan@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/sev: Fix stack type check in vc_switch_off_ist()

[ Upstream commit 5681981fb788281b09a4ea14d310d30b2bd89132 ]

The value of STACK_TYPE_EXCEPTION_LAST points to the last _valid_
exception stack. Reflect that in the check done in the
vc_switch_off_ist() function.

Fixes: a13644f3a53de ("x86/entry/64: Add entry code for #VC handler")
Reported-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211021080833.30875-2-joro@8bytes.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

clocksource/drivers/timer-ti-dm: Select TIMER_OF

[ Upstream commit eda9a4f7af6ee47e9e131f20e4f8a41a97379293 ]

When building OMAP_DM_TIMER without TIMER_OF, there are orphan sections
due to the use of TIMER_OF_DELCARE() without CONFIG_TIMER_OF. Select
CONFIG_TIMER_OF when enaling OMAP_DM_TIMER:

arm-linux-gnueabi-ld: warning: orphan section `__timer_of_table' from `drivers/clocksource/timer-ti-dm-systimer.o' being placed in section `__timer_of_table'

Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/202108282255.tkdt4ani-lkp@intel.com/
Cc: Tony Lindgren <tony@atomide.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: linux-omap@vger.kernel.org
Fixes: 52762fbd1c47 ("clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support")
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210828175747.3777891-1-keescook@chromium.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PM: hibernate: fix sparse warnings

[ Upstream commit 01de5fcd8b1ac0ca28d2bb0921226a54fdd62684 ]

When building the kernel with sparse enabled 'C=1' the following
warnings shows up:

kernel/power/swap.c:390:29: warning: incorrect type in assignment (different base types)
kernel/power/swap.c:390:29:    expected int ret
kernel/power/swap.c:390:29:    got restricted blk_status_t

This is due to function hib_wait_io() returns a 'blk_status_t' which is
a bitwise u8. Commit 5416da01ff6e ("PM: hibernate: Remove
blk_status_to_errno in hib_wait_io") seemed to have mixed up the return
type. However, the 4e4cbee93d56 ("block: switch bios to blk_status_t")
actually broke the behaviour by returning the wrong type.

Rework so function hib_wait_io() returns a 'int' instead of
'blk_status_t' and make sure to call function
blk_status_to_errno(hb->error)' when returning from function
hib_wait_io() a int gets returned.

Fixes: 4e4cbee93d56 ("block: switch bios to blk_status_t")
Fixes: 5416da01ff6e ("PM: hibernate: Remove blk_status_to_errno in hib_wait_io")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-rdma: fix error code in nvme_rdma_setup_ctrl

[ Upstream commit 09748122009aed7bfaa7acc33c10c083a4758322 ]

In case that icdoff is not zero or mandatory keyed sgls are not
supported by the NVMe/RDMA target, we'll go to error flow but we'll
return 0 to the caller. Fix it by returning an appropriate error code.

Fixes: c66e2998c8ca ("nvme-rdma: centralize controller setup sequence")
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nbd: Fix use-after-free in pid_show

[ Upstream commit 0c98057be9efa32de78dbc4685fc73da9d71faa1 ]

I got issue as follows:
[  263.886511] BUG: KASAN: use-after-free in pid_show+0x11f/0x13f
[  263.888359] Read of size 4 at addr ffff8880bf0648c0 by task cat/746
[  263.890479] CPU: 0 PID: 746 Comm: cat Not tainted 4.19.90-dirty #140
[  263.893162] Call Trace:
[  263.893509]  dump_stack+0x108/0x15f
[  263.893999]  print_address_description+0xa5/0x372
[  263.894641]  kasan_report.cold+0x236/0x2a8
[  263.895696]  __asan_report_load4_noabort+0x25/0x30
[  263.896365]  pid_show+0x11f/0x13f
[  263.897422]  dev_attr_show+0x48/0x90
[  263.898361]  sysfs_kf_seq_show+0x24d/0x4b0
[  263.899479]  kernfs_seq_show+0x14e/0x1b0
[  263.900029]  seq_read+0x43f/0x1150
[  263.900499]  kernfs_fop_read+0xc7/0x5a0
[  263.903764]  vfs_read+0x113/0x350
[  263.904231]  ksys_read+0x103/0x270
[  263.905230]  __x64_sys_read+0x77/0xc0
[  263.906284]  do_syscall_64+0x106/0x360
[  263.906797]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Reproduce this issue as follows:
1. nbd-server 8000 /tmp/disk
2. nbd-client localhost 8000 /dev/nbd1
3. cat /sys/block/nbd1/pid
Then trigger use-after-free in pid_show.

Reason is after do step '2', nbd-client progress is already exit. So
it's task_struct already freed.
To solve this issue, revert part of 6521d39a64b3's modify and remove
useless 'recv_task' member of nbd_device.

Fixes: 6521d39a64b3 ("nbd: Remove variable 'pid'")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20211020073959.2679255-1-yebin10@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: micrel: ksz8041nl: do not use power down mode

[ Upstream commit 2641b62d2fab52648e34cdc6994b2eacde2d27c1 ]

Some Micrel KSZ8041NL PHY chips exhibit continuous RX errors after using
the power down mode bit (0.11). If the PHY is taken out of power down
mode in a certain temperature range, the PHY enters a weird state which
leads to continuously reporting RX errors. In that state, the MAC is not
able to receive or send any Ethernet frames and the activity LED is
constantly blinking. Since Linux is using the suspend callback when the
interface is taken down, ending up in that state can easily happen
during a normal startup.

Micrel confirmed the issue in errata DS80000700A [*], caused by abnormal
clock recovery when using power down mode. Even the latest revision (A4,
Revision ID 0x1513) seems to suffer that problem, and according to the
errata is not going to be fixed.

Remove the suspend/resume callback to avoid using the power down mode
completely.

[*] https://ww1.microchip.com/downloads/en/DeviceDoc/80000700A.pdf

Fixes: 1a5465f5d6a2 ("phy/micrel: Add suspend/resume support to Micrel PHYs")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: enetc: unmap DMA in enetc_send_cmd()

[ Upstream commit cd4bc63de774eee95e9bac26a565cd80e0fca421 ]

Coverity complains of a possible dereference of a null return value.

    5. returned_null: kzalloc returns NULL. [show details]
    6. var_assigned: Assigning: si_data = NULL return value from kzalloc.
488        si_data = kzalloc(data_size, __GFP_DMA | GFP_KERNEL);
489        cbd.length = cpu_to_le16(data_size);
490
491        dma = dma_map_single(&priv->si->pdev->dev, si_data,
492                             data_size, DMA_FROM_DEVICE);

While this kzalloc() is unlikely to fail, I did notice that the function
returned without unmapping si_data.

Fix this by refactoring the error paths and checking for kzalloc()
failure.

Fixes: 888ae5a3952ba ("net: enetc: add tc flower psfp offload driver")
Cc: Claudiu Manoil <claudiu.manoil@nxp.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org (open list)
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Acked-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: pnvm: read EFI data only if long enough

[ Upstream commit e864a77f51d0d8113b49cf7d030bc9dc911c8176 ]

If the data we get from EFI is not even long enough for
the package struct we expect then ignore it entirely.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: a1a6a4cf49ec ("iwlwifi: pnvm: implement reading PNVM from UEFI")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20211016114029.33feba783518.I54a5cf33975d0330792b3d208b225d479e168f32@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: pnvm: don't kmemdup() more than we have

[ Upstream commit 0f892441d8c353144e3669b7991fa5fe0bd353e9 ]

We shouldn't kmemdup() more data than we have, that might
cause the code to crash. Fix that by updating the length
before the kmemdup.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20211016114029.ab0e64c3fba9.Ic6a3295fc384750b51b4270bf0b7d94984a139f2@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: mvm: reset PM state on unsuccessful resume

[ Upstream commit 2f629a7772e2a7bdaff25178917a40073f79702c ]

If resume fails for some reason, we need to set the PM state
back to normal so we're able to send commands during firmware
reset, rather than failing all of them because we're in D3.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: 708a39aaca22 ("iwlwifi: mvm: don't send commands during suspend\resume transition")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20211016114029.7ceb9eaca9f6.If0cbef38c6d07ec1ddce125878a4bdadcb35d2c9@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

mwifiex: Send DELBA requests according to spec

[ Upstream commit cc8a8bc37466f79b24d972555237f3d591150602 ]

While looking at on-air packets using Wireshark, I noticed we're never
setting the initiator bit when sending DELBA requests to the AP: While
we set the bit on our del_ba_param_set bitmask, we forget to actually
copy that bitmask over to the command struct, which means we never
actually set the initiator bit.

Fix that and copy the bitmask over to the host_cmd_ds_11n_delba command
struct.

Fixes: 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver")
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Acked-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211016153244.24353-5-verdre@v0yd.nl
Signed-off-by: Sasha Levin <sashal@kernel.org>

rsi: stop thread firstly in rsi_91x_init() error handling

[ Upstream commit 515e7184bdf0a3ebf1757cc77fb046b4fe282189 ]

When fail to init coex module, free 'common' and 'adapter' directly, but
common->tx_thread which will access 'common' and 'adapter' is running at
the same time. That will trigger the UAF bug.

==================================================================
BUG: KASAN: use-after-free in rsi_tx_scheduler_thread+0x50f/0x520 [rsi_91x]
Read of size 8 at addr ffff8880076dc000 by task Tx-Thread/124777
CPU: 0 PID: 124777 Comm: Tx-Thread Not tainted 5.15.0-rc5+ #19
Call Trace:
 dump_stack_lvl+0xe2/0x152
 print_address_description.constprop.0+0x21/0x140
 ? rsi_tx_scheduler_thread+0x50f/0x520
 kasan_report.cold+0x7f/0x11b
 ? rsi_tx_scheduler_thread+0x50f/0x520
 rsi_tx_scheduler_thread+0x50f/0x520
...

Freed by task 111873:
 kasan_save_stack+0x1b/0x40
 kasan_set_track+0x1c/0x30
 kasan_set_free_info+0x20/0x30
 __kasan_slab_free+0x109/0x140
 kfree+0x117/0x4c0
 rsi_91x_init+0x741/0x8a0 [rsi_91x]
 rsi_probe+0x9f/0x1750 [rsi_usb]

Stop thread before free 'common' and 'adapter' to fix it.

Fixes: 2108df3c4b18 ("rsi: add coex support")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211015040335.1021546-1-william.xuanziyang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7915: fix muar_idx in mt7915_mcu_alloc_sta_req()

[ Upstream commit 161cc13912d3c3e8857001988dfba39be842454a ]

For broadcast/multicast wcid, the muar_idx should be 0xe.

Fixes: e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7915: fix sta_rec_wtbl tag len

[ Upstream commit afa0370f3a3a64af6d368da0bedd72ab2a026cd0 ]

Fix tag len error for sta_rec_wtbl, which causes fw parsing error for
the tags placed behind it.

Fixes: e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: connac: fix possible NULL pointer dereference in mt76_connac_get_phy_mode_v2

[ Upstream commit b5f2ba8a4c794e8349c0e30036352b9f685164c4 ]

Fix the following NULL pointer dereference in mt76_connac_get_phy_mode_v2
routine triggered on mt7663s device when sta is NULL

[    5.490700] mt7663s mmc0:0001:1: N9 Firmware Version: 3.1.1, Build Time: 20200604161656
[    5.490815] mt7663s mmc0:0001:1: Region number: 0x4
[    5.490868] mt7663s mmc0:0001:1: Parsing tailer Region: 0
[    5.496251] mt7663s mmc0:0001:1: Region 0, override_addr = 0x00118000
[    5.496419] mt7663s mmc0:0001:1: Parsing tailer Region: 1
[    5.624027] mt7663s mmc0:0001:1: Parsing tailer Region: 2
[    5.656999] mt7663s mmc0:0001:1: Parsing tailer Region: 3
[    5.671876] mt7663s mmc0:0001:1: override_addr = 0x00118000, option = 3
[    9.358658] BUG: kernel NULL pointer dereference, address: 0000000000000000
[    9.358775] #PF: supervisor read access in kernel mode
[    9.358831] #PF: error_code(0x0000) - not-present page
[    9.358886] PGD 0 P4D 0
[    9.358917] Oops: 0000 [#1] SMP
[    9.358960] CPU: 0 PID: 235 Comm: NetworkManager Not tainted 5.15.0-rc4-kvm-02151-g39e333d657f4-dirty #769
[    9.359057] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-4.fc34 04/01/2014
[    9.359150] RIP: 0010:mt76_connac_get_phy_mode_v2+0xc9/0x11c
[    9.359473] RAX: 0000000000000013 RBX: 0000000000000000 RCX: 0000000000000027
[    9.359546] RDX: ffff8881f9c17358 RSI: 0000000000000001 RDI: ffff8881f9c17350
[    9.359624] RBP: ffff88810bac1ed4 R08: ffffffff822a4a48 R09: 0000000000000003
[    9.359697] R10: ffffffff82234a60 R11: ffffffff82234a60 R12: ffff88810bac1eec
[    9.359779] R13: 0000000000000000 R14: ffff88810bad1648 R15: ffff88810bac1eb8
[    9.359859] FS:  00007f5f1e45bbc0(0000) GS:ffff8881f9c00000(0000) knlGS:0000000000000000
[    9.359939] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    9.360003] CR2: 0000000000000000 CR3: 0000000105d5d000 CR4: 00000000000006b0
[    9.360083] Call Trace:
[    9.360116]  mt76_connac_mcu_uni_add_bss.cold+0x21/0x250
[    9.360175]  ? schedule_preempt_disabled+0xa/0x10
[    9.360232]  ? __mutex_lock.constprop.0+0x2ab/0x460
[    9.360286]  mt7615_remove_interface+0x63/0x1d0
[    9.360342]  drv_remove_interface+0x32/0xe0
[    9.360385]  ieee80211_do_stop+0x5da/0x800
[    9.360428]  ? dev_reset_queue+0x30/0x90
[    9.360472]  ieee80211_stop+0x3b/0xb0
[    9.360516]  __dev_close_many+0x7a/0xd0
[    9.360559]  __dev_change_flags+0xd6/0x1f0
[    9.360604]  dev_change_flags+0x21/0x60
[    9.360648]  do_setlink+0x259/0xfb0
[    9.360686]  ? __nla_validate_parse+0x51/0xb80
[    9.360742]  __rtnl_newlink+0x5b3/0x960
[    9.360785]  ? inet6_fill_ifla6_attrs+0x41d/0x470
[    9.360841]  ? __kmalloc_track_caller+0x57/0x3c0
[    9.360905]  ? netlink_trim+0x8a/0xb0
[    9.360949]  ? skb_queue_tail+0x1b/0x50

Fixes: 67aa27431c7f8 ("mt76: mt7921: rely on mt76_connac_mcu common library")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7615: fix monitor mode tear down crash

[ Upstream commit a6fdbdd1ac2996a58a84672ef37efb5cbb98fadf ]

[  103.451600] CPU 3 Unable to handle kernel paging request at virtual address 00000003, epc == 8576591c, ra == 857659f0
[  103.462226] Oops[#1]:
[  103.464499] CPU: 3 PID: 9247 Comm: ifconfig Tainted: G        W         5.4.143 #0
[  103.472031] $ 0   : 00000000 00000001 83be3854 00000000
[  103.477239] $ 4   : 8102a374 8102a374 8102f0b0 00000200
[  103.482444] $ 8   : 0000002d 000001e4 64373765 5d206337
[  103.487647] $12   : 00000000 00000005 00000000 0006d1df
[  103.492853] $16   : 83be3848 853838a8 8743d600 00010000
[  103.498059] $20   : 00000000 00000000 8553dec0 0000007f
[  103.503266] $24   : 00000003 80382084
[  103.508472] $28   : 831d4000 831d5bc0 00000001 857659f0
[  103.513678] Hi    : 00000122
[  103.516543] Lo    : d1768000
[  103.519452] epc   : 8576591c mt7615_mcu_add_bss+0xd0/0x3c0 [mt7615_common]
[  103.526306] ra    : 857659f0 mt7615_mcu_add_bss+0x1a4/0x3c0 [mt7615_common]
[  103.533232] Status: 11007c03 KERNEL EXL IE
[  103.537402] Cause : 40800008 (ExcCode 02)
[  103.541389] BadVA : 00000003
[  103.544253] PrId  : 0001992f (MIPS 1004Kc)
[  103.797086] Call Trace:
[  103.799562] [<8576591c>] mt7615_mcu_add_bss+0xd0/0x3c0 [mt7615_common]
[  103.806082] [<85760a14>] mt7615_remove_interface+0x74/0x1e0 [mt7615_common]
[  103.813280] [<85603fcc>] drv_remove_interface+0x2c/0xa0 [mac80211]
[  103.819612] [<8561a8e4>] ieee80211_del_virtual_monitor.part.22+0x74/0xe8 [mac80211]
[  103.827410] [<8561b7f0>] ieee80211_do_stop+0x4a4/0x8a0 [mac80211]
[  103.833671] [<8561bc00>] ieee80211_stop+0x14/0x24 [mac80211]
[  103.839405] [<8045a328>] __dev_close_many+0x9c/0x10c
[  103.844364] [<80463de4>] __dev_change_flags+0x16c/0x1e4
[  103.849569] [<80463e84>] dev_change_flags+0x28/0x70
[  103.854440] [<80521e54>] devinet_ioctl+0x280/0x774
[  103.859222] [<80526248>] inet_ioctl+0xa4/0x1c8
[  103.863674] [<80436830>] sock_ioctl+0x2d8/0x4bc
[  103.868201] [<801adbb4>] do_vfs_ioctl+0xb8/0x7c0
[  103.872804] [<801ae30c>] ksys_ioctl+0x50/0xb4
[  103.877156] [<80014598>] syscall_common+0x34/0x58

Fixes: 04b8e65922f63 ("mt76: add mac80211 driver for MT7615 PCIe-based chipsets")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7921: fix retrying release semaphore without end

[ Upstream commit 02d1c7d494d8052288bc175e4ff54b56d08a3c5f ]

We should pass the error code to the caller immediately
to avoid the possible infinite retry to release the semaphore.

Fixes: 1c099ab44727 ("mt76: mt7921: add MCU support")
Co-developed-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7915: fix possible infinite loop release semaphore

[ Upstream commit e500c9470e26be66eb2bc6de773ae9091149118a ]

Fix possible infinite loop in mt7915_load_patch if
mt7915_mcu_patch_sem_ctrl always returns an error.

Fixes: e57b7901469fc ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7615: fix hwmon temp sensor mem use-after-free

[ Upstream commit 0bb4e9187ea4a59dc6658a62978deda0c0dc4b28 ]

Without this change, garbage is seen in the hwmon name and sensors output
for mt7615 is garbled.

Fixes: 109e505ad944 ("mt76: mt7615: add thermal sensor device support")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7915: fix hwmon temp sensor mem use-after-free

[ Upstream commit 0ae3ff5684514d72357240f1033a7494c51f93ed ]

Without this change, garbage is seen in the hwmon name and sensors output
for mt7915 is garbled. It appears that the hwmon logic does not make a
copy of the incoming string, but instead just copies a char* and expects
it to never go away.

Fixes: 33fe9c639c13 ("mt76: mt7915: add thermal sensor device support")
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7921: always wake device if necessary in debugfs

[ Upstream commit 569008744178b672ea3ad9047fa3098f1b73ca55 ]

Add missing device wakeup in debugfs code if we are accessing chip
registers.

Fixes: 1d8efc741df8 ("mt76: mt7921: introduce Runtime PM support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7921: fix kernel warning from cfg80211_calculate_bitrate

[ Upstream commit 8e695328a1006b7bab2d972e7d0111fa6e6faf51 ]

Fix the kernel warning from cfg80211_calculate_bitrate
due to the legacy rate is not parsed well in the current driver.

Also, zeros struct rate_info before we fill it out to avoid the old value
is kept such as rate->legacy.

[  790.921560] WARNING: CPU: 7 PID: 970 at net/wireless/util.c:1298 cfg80211_calculate_bitrate+0x354/0x35c [cfg80211]
[  790.987738] Hardware name: MediaTek Asurada rev1 board (DT)
[  790.993298] pstate: a0400009 (NzCv daif +PAN -UAO)
[  790.998104] pc : cfg80211_calculate_bitrate+0x354/0x35c [cfg80211]
[  791.004295] lr : cfg80211_calculate_bitrate+0x180/0x35c [cfg80211]
[  791.010462] sp : ffffffc0129c3880
[  791.013765] x29: ffffffc0129c3880 x28: ffffffd38305bea8
[  791.019065] x27: ffffffc0129c3970 x26: 0000000000000013
[  791.024364] x25: 00000000000003ca x24: 000000000000002f
[  791.029664] x23: 00000000000000d0 x22: ffffff8d108bc000
[  791.034964] x21: ffffff8d108bc0d0 x20: ffffffc0129c39a8
[  791.040264] x19: ffffffc0129c39a8 x18: 00000000ffff0a10
[  791.045563] x17: 0000000000000050 x16: 00000000000000ec
[  791.050910] x15: ffffffd3f9ebed9c x14: 0000000000000006
[  791.056211] x13: 00000000000b2eea x12: 0000000000000000
[  791.061511] x11: 00000000ffffffff x10: 0000000000000000
[  791.066811] x9 : 0000000000000000 x8 : 0000000000000000
[  791.072110] x7 : 0000000000000000 x6 : ffffffd3fafa5a7b
[  791.077409] x5 : 0000000000000000 x4 : 0000000000000000
[  791.082708] x3 : 0000000000000000 x2 : 0000000000000000
[  791.088008] x1 : ffffff8d3f79c918 x0 : 0000000000000000
[  791.093308] Call trace:
[  791.095770]  cfg80211_calculate_bitrate+0x354/0x35c [cfg80211]
[  791.101615]  nl80211_put_sta_rate+0x6c/0x2c0 [cfg80211]
[  791.106853]  nl80211_send_station+0x980/0xaa4 [cfg80211]
[  791.112178]  nl80211_get_station+0xb4/0x134 [cfg80211]
[  791.117308]  genl_rcv_msg+0x3a0/0x440
[  791.120960]  netlink_rcv_skb+0xcc/0x118
[  791.124785]  genl_rcv+0x34/0x48
[  791.127916]  netlink_unicast+0x144/0x1dc

Fixes: 1c099ab44727 ("mt76: mt7921: add MCU support")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7921: fix firmware usage of RA info using legacy rates

[ Upstream commit 99b8e195994d9d77de3bfe0cb403c44a57c2cf79 ]

According to the firmware usage, OFDM rates should fill out bit 6 - 13
while CCK rates should fill out bit 0 - 3 in legacy field of RA info to
make the rate adaption runs propertly. Otherwise, a unicast frame might be
picking up the unsupported rate to send out.

Fixes: 1c099ab44727 ("mt76: mt7921: add MCU support")
Reported-by: Joshua Emele <jemele@chromium.org>
Co-developed-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7921: report HE MU radiotap

[ Upstream commit 4fee32153ab62356aeea9d152d8f33a5fd3a0086 ]

Report HE MU/BF radiotap.

That fixed HE MU packets dropped by mac80211 because they are missing the
ieee80211_radiotap_he_mu header.

Fixes: 163f4d22c118d ("mt76: mt7921: add MAC support")
Co-developed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Co-developed-by: Eric-SY Chang <Eric-SY.Chang@mediatek.com>
Signed-off-by: Eric-SY Chang <Eric-SY.Chang@mediatek.com>
Tested-by: Eric-SY Chang <Eric-SY.Chang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: overwrite default reg_ops if necessary

[ Upstream commit f6e1f59885dae5a2553f8bbd328be2cb1c80ccb2 ]

Introduce mt76_register_debugfs_fops routine in order to
define per-driver regs file operations and make sure the
device is up before reading or writing its registers

Fixes: 1d8efc741df8 ("mt76: mt7921: introduce Runtime PM support")
Fixes: de5ff3c9d1a2 ("mt76: mt7615: introduce pm_power_save delayed work")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: connac: fix GTK rekey offload failure on WPA mixed mode

[ Upstream commit 781f62960c635cfed55a8f8c0f909bdaf8268257 ]

Update the proper firmware programming sequence to fix GTK rekey
offload failure on WPA mixed mode.

In the mt76_connac_mcu_key_iter,
gtk_tlv->proto should be only set up on pairwise key
and gtk_tlk->group_cipher should be only set up on the group key.

Otherwise, those parameters required by firmware would be set
incorrectly to cause GTK rekey offload failure on WPA mixed mode
and then disconnection follows.

Fixes: b47e21e75c80 ("mt76: mt7615: add gtk rekey offload support")
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Leon Yen <Leon.Yen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7921: fix dma hang in rmmod

[ Upstream commit a23f80aa9c5e6ad4ec8df88037b7ffd4162b1ec4 ]

The dma would be broken after rmmod flow. There are two different
cases causing this issue.
1. dma access without privilege.
2. hw access sequence borken by another context.

This patch handle both cases to avoid hw crash.

Fixes: 2b9ea5a8cf1bd ("mt76: mt7921: add mt7921_dma_cleanup in mt7921_unregister_device")
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7915: fix bit fields for HT rate idx

[ Upstream commit 47f1c08db7f3aaa2d13f8e56209375462ace7b8a ]

The bit fields of tx rate idx should be 6 bits, otherwise it might be
incorrect in HT mode.
For VHT/HE rates, only 4 bits are actually used by rate idx, the other
2 bits are used for other functions.

Fixes: c31d94af1843 ("mt76: mt7915: fix tx rate related fields in tx descriptor")
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7915: fix potential overflow of eeprom page index

[ Upstream commit 82a980f82a511ce74ab57eb9f692d02225eb32f4 ]

If total eeprom size is divisible by per-page size, the i in for loop
will exceed max page index, which happens in our newer chipset.

Fixes: 26f18380e6ca ("mt76: mt7915: add support for flash mode")
Signed-off-by: Bo Jiao <bo.jiao@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7921: Fix out of order process by invalid event pkt

[ Upstream commit cd3f387371e941e6806b455b4ba5b9f4ca4b77c6 ]

The acceptable event report should inlcude original CMD-ID. Otherwise,
drop unexpected result from fw.

Fixes: 1c099ab44727c ("mt76: mt7921: add MCU support")
Signed-off-by: Jimmy Hu <Jimmy.Hu@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt76x02: fix endianness warnings in mt76x02_mac.c

[ Upstream commit c33edef520213feccebc22c9474c685b9fb60611 ]

Fix the following sparse warning in mt76x02_mac_write_txwi and
mt76x02_mac_tx_rate_val routines:
drivers/net/wireless/mediatek/mt76/mt76x02_mac.c:237:19:
warning: restricted __le16 degrades to intege
warning: cast from restricted __le16
drivers/net/wireless/mediatek/mt76/mt76x02_mac.c:383:28:
warning: incorrect type in assignment (different base types)
expected restricted __le16 [usertype] rate
got unsigned long

Fixes: db9f11d3433f7 ("mt76: store wcid tx rate info in one u32 reduce locking")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7921: fix survey-dump reporting

[ Upstream commit 64ed76d118c656907ec1155f2cdd24de778470a2 ]

Fix MIB tx-rx MIB counters for survey-dump reporting.

Fixes: 163f4d22c118d ("mt76: mt7921: add MAC support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: fix build error implicit enumeration conversion

[ Upstream commit adedbc643f02f5a3193b8dcc5cfca97b4c988667 ]

drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:114:10: error: implicit
conversion from enumeration type 'enum mt76_cipher_type' to different
enumeration type 'enum mcu_cipher_type' [-Werror,-Wenum-conversion]
                return MT_CIPHER_NONE;
                ~~~~~~ ^~~~~~~~~~~~~~

drivers/net/wireless/mediatek/mt76/mt7921/mcu.c:114:10: error: implicit
conversion from enumeration type 'enum mt76_cipher_type' to different
enumeration type 'enum mcu_cipher_type' [-Werror,-Wenum-conversion]
                return MT_CIPHER_NONE;
                ~~~~~~ ^~~~~~~~~~~~~~

Fixes: c368362c36d3 ("mt76: fix iv and CCMP header insertion")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: connac: fix mt76_connac_gtk_rekey_tlv usage

[ Upstream commit d741abeafa47a7331cd4fe526e44db4ad3da0f62 ]

The mistaken structure is introduced since we added the GTK rekey offload
to mt7663. The patch fixes mt76_connac_gtk_rekey_tlv structure according
to the MT7663 and MT7921 firmware we have submitted into
linux-firmware.git.

Fixes: b47e21e75c80 ("mt76: mt7615: add gtk rekey offload support")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Leon Yen <Leon.Yen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7915: fix info leak in mt7915_mcu_set_pre_cal()

[ Upstream commit 3924715ffe5e064a85f56490f77b7b2084230800 ]

Zero out all the unused members of "req" so that we don't disclose
stack information.

Fixes: 495184ac91bb ("mt76: mt7915: add support for applying pre-calibration data")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7615: fix endianness warning in mt7615_mac_write_txwi

[ Upstream commit d81bfb41e30c42531536c5d2baa4d275a8309715 ]

Fix the following sparse warning in mt7615_mac_write_txwi routine:
drivers/net/wireless/mediatek/mt76/mt7615/mac.c:758:17:
warning: incorrect type in assignment
expected restricted __le32 [usertype]
got unsigned long

Fixes: 04b8e65922f63 ("mt76: add mac80211 driver for MT7615 PCIe-based chipsets")
Fixes: d4bf77bd74930 ("mt76: mt7615: introduce mt7663u support to mt7615_write_txwi")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7921: fix endianness warning in mt7921_update_txs

[ Upstream commit 7fc167bbc9296e6aeaaa4063db3639e8a3db75f6 ]

Fix the following sparse warning in mt7921_update_txs routine:
drivers/net/wireless/mediatek/mt76/mt7921/mac.c:752:31:
warning: cast to restricted __le32
drivers/net/wireless/mediatek/mt76/mt7921/mac.c:752:31:
warning: restricted __le32 degrades to integer

Fixes: e5bca8c5d2cd3 ("mt76: mt7921: improve code readability for mt7921_update_txs")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7915: fix endianness warning in mt7915_mac_add_txs_skb

[ Upstream commit 08b3c8da87aed4200dab00906f149d675ca90f23 ]

Fix the following sparse warning in mt7915_mac_add_txs_skb routine:

drivers/net/wireless/mediatek/mt76/mt7915/mac.c:1235:29:
warning: cast to restricted __le32
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:1235:23:
warning: restricted __le32 degrades to integer

Fixes: 3de4cb1756565 ("mt76: mt7915: add support for tx status reporting")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7921: fix endianness in mt7921_mcu_tx_done_event

[ Upstream commit df040215c077de0c13aab12c222bd0360a0d3988 ]

Fix endianness in mt7921_mcu_tx_done_event event reported by the
firmware.

Fixes: 3cce2b98e0241 ("mt76: mt7921: introduce mac tx done handling")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdkfd: Fix an inappropriate error handling in allloc memory of gpu

[ Upstream commit 5aeeac6fa38fca450faed9770f75b1470c0e2073 ]

We should unreference a gem object instead of an amdgpu bo here.

Fixes: fd9a9f8801de ("drm/amdgpu: Use GEM obj reference for KFD BOs")

Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: PM: Fix sharing of wakeup power resources

[ Upstream commit a2d7b2e004af6b09f21ac3d10f8f4456c16a8ddf ]

If an ACPI wakeup power resource is shared between multiple devices,
it may not be managed correctly.

Suppose, for example, that two devices, A and B, share a wakeup power
resource P whose wakeup_enabled flag is 0 initially.  Next, suppose
that wakeup power is enabled for A and B, in this order, and disabled
for B.  When wakeup power is enabled for A, P will be turned on and
its wakeup_enabled flag will be set.  Next, when wakeup power is
enabled for B, P will not be touched, because its wakeup_enabled flag
is set.  Now, when wakeup power is disabled for B, P will be turned
off which is incorrect, because A will still need P in order to signal
wakeup.

Moreover, if wakeup power is enabled for A and then disabled for B,
the latter will cause P to be turned off incorrectly (it will be still
needed by A), because acpi_disable_wakeup_device_power() is allowed
to manipulate power resources when the wakeup.prepare_count counter
of the given device is 0.

While the first issue could be addressed by changing the
wakeup_enabled power resource flag into a counter, addressing the
second one requires modifying acpi_disable_wakeup_device_power() to
do nothing when the target device's wakeup.prepare_count reference
counter is zero and that would cause the new counter to be redundant.
Namely, if acpi_disable_wakeup_device_power() is modified as per the
above, every change of the new counter following a wakeup.prepare_count
change would be reflected by the analogous change of the main reference
counter of the given power resource.

Accordingly, modify acpi_disable_wakeup_device_power() to do nothing
when the target device's wakeup.prepare_count reference counter is
zero and drop the power resource wakeup_enabled flag altogether.

While at it, ensure that all of the power resources that can be
turned off will be turned off when disabling device wakeup due to
a power resource manipulation error, to prevent energy from being
wasted.

Fixes: b5d667eb392e ("ACPI / PM: Take unusual configurations of power resources into account")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: PM: Turn off unused wakeup power resources

[ Upstream commit 7a63296d6f579a02b2675b4b0fe5b1cd3235e8d3 ]

If an ACPI power resource is found to be "on" during the
initialization of the list of wakeup power resources of a device,
it is reference counted and its wakeup_enabled flag is set, which is
problematic if the deivce in question is the only user of the given
power resource, it is never runtime-suspended and it is not allowed
to wake up the system from sleep, because in that case the given
power resource will stay "on" until the system reboots and energy
will be wasted.

It is better to simply turn off wakeup power resources that are "on"
during the initialization unless their reference counters are not
zero, because that may be the only opportunity to prevent them from
staying in the "on" state all the time.

Fixes: b5d667eb392e ("ACPI / PM: Take unusual configurations of power resources into account")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mailbox: mtk-cmdq: Fix local clock ID usage

[ Upstream commit 0a5ad4322927ee4aaba6facc0e4faf1ab6c0d48e ]

In the probe function, the clock IDs were pointed to local variables
which should only be used in the same code block, and any access to them
after the probing stage becomes an use-after-free case.

Since there are only limited variants of the gce clock names so far, we
can just declare them as static constants to fix the issue.

Fixes: 85dfdbfc13ea ("mailbox: cmdq: add multi-gce clocks support for mt8195")
Signed-off-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mailbox: mtk-cmdq: Validate alias_id on probe

[ Upstream commit 5c154b6a51c2d2d7f266b3ef49b7dd1dc8cb5b65 ]

of_alias_get_id() may return -ENODEV which leads to illegal access to
the cmdq->clocks array.
Adding a check over alias_id to prevent the unexpected behavior.

Fixes: 85dfdbfc13ea ("mailbox: cmdq: add multi-gce clocks support for mt8195")
Signed-off-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: thinkpad_acpi: Fix bitwise vs. logical warning

[ Upstream commit fd96e35ea7b95f1e216277805be89d66e4ae962d ]

A new warning in clang points out a use of bitwise OR with boolean
expressions in this driver:

drivers/platform/x86/thinkpad_acpi.c:9061:11: error: use of bitwise '|' with boolean operands [-Werror,-Wbitwise-instead-of-logical]
        else if ((strlencmp(cmd, "level disengaged") == 0) |
                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                                                           ||
drivers/platform/x86/thinkpad_acpi.c:9061:11: note: cast one or both operands to int to silence this warning
1 error generated.

This should clearly be a logical OR so change it to fix the warning.

Fixes: fe98a52ce754 ("ACPI: thinkpad-acpi: add sysfs support to fan subdriver")
Link: https://github.com/ClangBuiltLinux/linux/issues/1476
Reported-by: Tor Vic <torvic9@mailbox.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20211018182537.2316800-1-nathan@kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

blk-wbt: prevent NULL pointer dereference in wb_timer_fn

[ Upstream commit 480d42dc001bbfe953825a92073012fcd5a99161 ]

The timer callback used to evaluate if the latency is exceeded can be
executed after the corresponding disk has been released, causing the
following NULL pointer dereference:

[ 119.987108] BUG: kernel NULL pointer dereference, address: 0000000000000098
[ 119.987617] #PF: supervisor read access in kernel mode
[ 119.987971] #PF: error_code(0x0000) - not-present page
[ 119.988325] PGD 7c4a4067 P4D 7c4a4067 PUD 7bf63067 PMD 0
[ 119.988697] Oops: 0000 [#1] SMP NOPTI
[ 119.988959] CPU: 1 PID: 9353 Comm: cloud-init Not tainted 5.15-rc5+arighi #rc5+arighi
[ 119.989520] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
[ 119.990055] RIP: 0010:wb_timer_fn+0x44/0x3c0
[ 119.990376] Code: 41 8b 9c 24 98 00 00 00 41 8b 94 24 b8 00 00 00 41 8b 84 24 d8 00 00 00 4d 8b 74 24 28 01 d3 01 c3 49 8b 44 24 60 48 8b 40 78 <4c> 8b b8 98 00 00 00 4d 85 f6 0f 84 c4 00 00 00 49 83 7c 24 30 00
[ 119.991578] RSP: 0000:ffffb5f580957da8 EFLAGS: 00010246
[ 119.991937] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000004
[ 119.992412] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88f476d7f780
[ 119.992895] RBP: ffffb5f580957dd0 R08: 0000000000000000 R09: 0000000000000000
[ 119.993371] R10: 0000000000000004 R11: 0000000000000002 R12: ffff88f476c84500
[ 119.993847] R13: ffff88f4434390c0 R14: 0000000000000000 R15: ffff88f4bdc98c00
[ 119.994323] FS: 00007fb90bcd9c00(0000) GS:ffff88f4bdc80000(0000) knlGS:0000000000000000
[ 119.994952] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 119.995380] CR2: 0000000000000098 CR3: 000000007c0d6000 CR4: 00000000000006e0
[ 119.995906] Call Trace:
[ 119.996130] ? blk_stat_free_callback_rcu+0x30/0x30
[ 119.996505] blk_stat_timer_fn+0x138/0x140
[ 119.996830] call_timer_fn+0x2b/0x100
[ 119.997136] __run_timers.part.0+0x1d1/0x240
[ 119.997470] ? kvm_clock_get_cycles+0x11/0x20
[ 119.997826] ? ktime_get+0x3e/0xa0
[ 119.998110] ? native_apic_msr_write+0x2c/0x30
[ 119.998456] ? lapic_next_event+0x20/0x30
[ 119.998779] ? clockevents_program_event+0x94/0xf0
[ 119.999150] run_timer_softirq+0x2a/0x50
[ 119.999465] __do_softirq+0xcb/0x26f
[ 119.999764] irq_exit_rcu+0x8c/0xb0
[ 120.000057] sysvec_apic_timer_interrupt+0x43/0x90
[ 120.000429] ? asm_sysvec_apic_timer_interrupt+0xa/0x20
[ 120.000836] asm_sysvec_apic_timer_interrupt+0x12/0x20

In this case simply return from the timer callback (no action
required) to prevent the NULL pointer dereference.

BugLink: https://bugs.launchpad.net/bugs/1947557
Link: https://lore.kernel.org/linux-mm/YWRNVTk9N8K0RMst@arighi-desktop/
Fixes: 34dbad5d26e2 ("blk-stat: convert to callback-based statistics reporting")
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Link: https://lore.kernel.org/r/YW6N2qXpBU3oc50q@arighi-desktop
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block: ataflop: fix breakage introduced at blk-mq refactoring

[ Upstream commit 86d46fdaa12ae5befc16b8d73fc85a3ca0399ea6 ]

Refactoring of the Atari floppy driver when converting to blk-mq
has broken the state machine in not-so-subtle ways:

finish_fdc() must be called when operations on the floppy device
have completed. This is crucial in order to relase the ST-DMA
lock, which protects against concurrent access to the ST-DMA
controller by other drivers (some DMA related, most just related
to device register access - broken beyond compare, I know).

When rewriting the driver's old do_request() function, the fact
that finish_fdc() was called only when all queued requests had
completed appears to have been overlooked. Instead, the new
request function calls finish_fdc() immediately after the last
request has been queued. finish_fdc() executes a dummy seek after
most requests, and this overwrites the state machine's interrupt
hander that was set up to wait for completion of the read/write
request just prior. To make matters worse, finish_fdc() is called
before device interrupts are re-enabled, making certain that the
read/write interupt is missed.

Shifting the finish_fdc() call into the read/write request
completion handler ensures the driver waits for the request to
actually complete. With a queue depth of 2, we won't see long
request sequences, so calling finish_fdc() unconditionally just
adds a little overhead for the dummy seeks, and keeps the code
simple.

While we're at it, kill ataflop_commit_rqs() which does nothing
but run finish_fdc() unconditionally, again likely wiping out an
in-flight request.

Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Fixes: 6ec3938cff95 ("ataflop: convert to blk-mq")
CC: linux-block@vger.kernel.org
CC: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Link: https://lore.kernel.org/r/20211019061321.26425-1-schmitzmic@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io-wq: Remove duplicate code in io_workqueue_create()

[ Upstream commit 71e1cef2d794338cc7b979d4c6144e1dc12718b5 ]

While task_work_add() in io_workqueue_create() is true,
then duplicate code is executed:

  -> clear_bit_unlock(0, &worker->create_state);
  -> io_worker_release(worker);
  -> atomic_dec(&acct->nr_running);
  -> io_worker_ref_put(wq);
  -> return false;

  -> clear_bit_unlock(0, &worker->create_state); // back to io_workqueue_create()
  -> io_worker_release(worker);
  -> kfree(worker);

The io_worker_release() and clear_bit_unlock() are executed twice.

Fixes: 3146cba99aa2 ("io-wq: make worker creation resilient against signals")
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Link: https://lore.kernel.org/r/20210911085847.34849-1-cuibixuan@huawei.com
Reviwed-by: Hao Xu <haoxu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: mxs-mmc: disable regulator on error and in the remove function

[ Upstream commit ce5f6c2c9b0fcb4094f8e162cfd37fb4294204f7 ]

The 'reg_vmmc' regulator is enabled in the probe. It is never disabled.
Neither in the error handling path of the probe nor in the remove
function.

Register a devm_action to disable it when needed.

Fixes: 4dc5a79f1350 ("mmc: mxs-mmc: enable regulator for mmc slot")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/4aadb3c97835f7b80f00819c3d549e6130384e67.1634365151.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ir_toy: assignment to be16 should be of correct type

[ Upstream commit febfe985fc2ea052a363f6525ff624b8efd5273c ]

commit f0c15b360fb6 ("media: ir_toy: prevent device from hanging during
transmit") removed a cpu_to_be16() cast, which causes a sparse warning.

Fixes: f0c15b360fb6 ("media: ir_toy: prevent device from hanging during transmit")
Reported-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ivtv: fix build for UML

[ Upstream commit 6cb67bea945bdf0ad40e633cd2d9fbeb0855675b ]

Prevent the use of page table macros and types from 2 conflicting
places. This fixes multiple build errors and warnings, e.g.:

../arch/x86/include/asm/pgtable_64_types.h:21:34: error: conflicting types for ‘pte_t’
 typedef struct { pteval_t pte; } pte_t;
                                  ^~~~~
In file included from ../include/linux/mm_types_task.h:16:0,
                 from ../include/linux/mm_types.h:5,
                 from ../include/linux/buildid.h:5,
                 from ../include/linux/module.h:14,
                 from ../drivers/media/pci/ivtv/ivtv-driver.h:40,
                 from ../drivers/media/pci/ivtv/ivtvfb.c:29:
../arch/um/include/asm/page.h:57:39: note: previous declaration of ‘pte_t’ was here
 typedef struct { unsigned long pte; } pte_t;

../arch/x86/include/asm/pgtable_types.h:284:43: error: expected ‘)’ before ‘prot’
 static inline pgprot_t pgprot_nx(pgprot_t prot)
                                           ^
../include/linux/pgtable.h:914:26: note: in definition of macro ‘pgprot_nx’
 #define pgprot_nx(prot) (prot)
                          ^~~~
In file included from ../arch/x86/include/asm/memtype.h:6:0,
                 from ../drivers/media/pci/ivtv/ivtvfb.c:40:
../arch/x86/include/asm/pgtable_types.h:288:0: warning: "pgprot_nx" redefined
 #define pgprot_nx pgprot_nx

../arch/x86/include/asm/page_types.h:11:0: warning: "PAGE_SIZE" redefined
 #define PAGE_SIZE  (_AC(1,UL) << PAGE_SHIFT)

In file included from ../include/linux/mm_types_task.h:16:0,
                 from ../include/linux/mm_types.h:5,
                 from ../include/linux/buildid.h:5,
                 from ../include/linux/module.h:14,
                 from ../drivers/media/pci/ivtv/ivtv-driver.h:40,
                 from ../drivers/media/pci/ivtv/ivtvfb.c:29:
../arch/um/include/asm/page.h:14:0: note: this is the location of the previous definition
 #define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT)

Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Andy Walls <awalls@md.metrocast.net>
Cc: linux-um@lists.infradead.org
Cc: Richard Weinberger <richard@nod.at>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mailbox: Remove WARN_ON for async_cb.cb in cmdq_exec_done

[ Upstream commit ce1537fe288469bf68ee0aabdb860a790b4755ef ]

Because mtk_drm_crtc_update_config is not using cmdq_pkt_flush_async,
it won't have pkt->async_cb.cb anymore.

So remove the WARN_ON check of pkt->async_cb.cb at cmdq_exec_done.

Fixes: 1b6b0ce2240e ("mailbox: mtk-cmdq: Use mailbox rx_callback")
Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com>
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

thermal/drivers/qcom/lmh: make QCOM_LMH depends on QCOM_SCM

[ Upstream commit 9e5a4fb8423081d0efbf165c71c7f4abdf5f918c ]

Without QCOM_SCM, build failed, avoid like below:

aarch64-linux-gnu-ld: Unexpected GOT/PLT entries detected!
aarch64-linux-gnu-ld: Unexpected run-time procedure linkages detected!
aarch64-linux-gnu-ld: drivers/thermal/qcom/lmh.o: in function `lmh_probe':
/data/arm/workspace/kernel-build/linux/build/../drivers/thermal/qcom/lmh.c:141: undefined reference to `qcom_scm_lmh_dcvsh_available'
aarch64-linux-gnu-ld: /data/arm/workspace/kernel-build/linux/build/../drivers/thermal/qcom/lmh.c:144: undefined reference to `qcom_scm_lmh_dcvsh'
aarch64-linux-gnu-ld: /data/arm/workspace/kernel-build/linux/build/../drivers/thermal/qcom/lmh.c:149: undefined reference to `qcom_scm_lmh_dcvsh'
aarch64-linux-gnu-ld: /data/arm/workspace/kernel-build/linux/build/../drivers/thermal/qcom/lmh.c:154: undefined reference to `qcom_scm_lmh_dcvsh'
aarch64-linux-gnu-ld: /data/arm/workspace/kernel-build/linux/build/../drivers/thermal/qcom/lmh.c:159: undefined reference to `qcom_scm_lmh_dcvsh'
aarch64-linux-gnu-ld: /data/arm/workspace/kernel-build/linux/build/../drivers/thermal/qcom/lmh.c:166: undefined reference to `qcom_scm_lmh_profile_change'
aarch64-linux-gnu-ld: /data/arm/workspace/kernel-build/linux/build/../drivers/thermal/qcom/lmh.c:173: undefined reference to `qcom_scm_lmh_dcvsh'
aarch64-linux-gnu-ld: /data/arm/workspace/kernel-build/linux/build/../drivers/thermal/qcom/lmh.c:180: undefined reference to `qcom_scm_lmh_dcvsh'
aarch64-linux-gnu-ld: /data/arm/workspace/kernel-build/linux/build/../drivers/thermal/qcom/lmh.c:187: undefined reference to `qcom_scm_lmh_dcvsh'
make[1]: *** [/data/arm/workspace/kernel-build/linux/Makefile:1183: vmlinux] Error 1
make[1]: Leaving directory '/data/arm/workspace/kernel-build/linux/build'
make: *** [Makefile:219: __sub-make] Error 2
make: Leaving directory '/data/arm/workspace/kernel-build/linux'

Fixes: 53bca371cdf7 ("thermal/drivers/qcom: Add support for LMh driver")
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Link: https://lore.kernel.org/r/20211009015853.3509559-1-liu.yun@linux.dev
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stream: don't purge sk_error_queue in sk_stream_kill_queues()

[ Upstream commit 24bcbe1cc69fa52dc4f7b5b2456678ed464724d8 ]

sk_stream_kill_queues() can be called on close when there are
still outstanding skbs to transmit. Those skbs may try to queue
notifications to the error queue (e.g. timestamps).
If sk_stream_kill_queues() purges the queue without taking
its lock the queue may get corrupted, and skbs leaked.

This shows up as a warning about an rmem leak:

WARNING: CPU: 24 PID: 0 at net/ipv4/af_inet.c:154 inet_sock_destruct+0x...

The leak is always a multiple of 0x300 bytes (the value is in
%rax on my builds, so RAX: 0000000000000300). 0x300 is truesize of
an empty sk_buff. Indeed if we dump the socket state at the time
of the warning the sk_error_queue is often (but not always)
corrupted. The ->next pointer points back at the list head,
but not the ->prev pointer. Indeed we can find the leaked skb
by scanning the kernel memory for something that looks like
an skb with ->sk = socket in question, and ->truesize = 0x300.
The contents of ->cb[] of the skb confirms the suspicion that
it is indeed a timestamp notification (as generated in
__skb_complete_tx_timestamp()).

Removing purging of sk_error_queue should be okay, since
inet_sock_destruct() does it again once all socket refs
are gone. Eric suggests this may cause sockets that go
thru disconnect() to maintain notifications from the
previous incarnations of the socket, but that should be
okay since the race was there anyway, and disconnect()
is not exactly dependable.

Thanks to Jonathan Lemon and Omar Sandoval for help at various
stages of tracing the issue.

Fixes: cb9eff097831 ("net: new user space API for time stamping of incoming and outgoing packets")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm: uninitialized variable in msm_gem_import()

[ Upstream commit 2203bd0e5c12ffc53ffdd4fbd7b12d6ba27e0424 ]

The msm_gem_new_impl() function cleans up after itself so there is no
need to call drm_gem_object_put().  Conceptually, it does not make sense
to call a kref_put() function until after the reference counting has
been initialized which happens immediately after this call in the
drm_gem_(private_)object_init() functions.

In the msm_gem_import() function the "obj" pointer is uninitialized, so
it will lead to a crash.

Fixes: 05b849111c07 ("drm/msm: prime support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211013081315.GG6010@kili
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm: fix potential NULL dereference in cleanup

[ Upstream commit 027d052a36e56789a2134772bacb4fd0860f03a3 ]

The "msm_obj->node" list needs to be initialized earlier so that the
list_del() in msm_gem_free_object() doesn't experience a NULL pointer
dereference.

Fixes: 6ed0897cd800 ("drm/msm: Fix debugfs deadlock")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211013081133.GF6010@kili
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm: unlock on error in get_sched_entity()

[ Upstream commit 7425e8167507fe512d8ac0825acda4aebf0a7ca0 ]

Add a missing unlock on the error path if drm_sched_entity_init() fails.

Fixes: 68002469e571 ("drm/msm: One sched entity per process per priority")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211011124005.GE15188@kili
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm: potential error pointer dereference in init()

[ Upstream commit b6816441a14bbe356ba8590de79cfea2de6a085c ]

The msm_iommu_new() returns error pointers on failure so check for that
to avoid an Oops.

Fixes: ccac7ce373c1 ("drm/msm: Refactor address space initialization")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211004103806.GD25015@kili
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm: Fix potential Oops in a6xx_gmu_rpmh_init()

[ Upstream commit 3d91e50ff58364f6572ad268b508175d27800e51 ]

There are two problems here:
1) The "seqptr" is used uninitalized when we free it at the end.
2) The a6xx_gmu_get_mmio() function returns error pointers.  It never
   returns true.

Fixes: 64245fc55172 ("drm/msm/a6xx: use AOP-initialized PDC for a650")
Fixes: f8fc924e088e ("drm/msm/a6xx: Fix PDC register overlap")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211004134530.GB11689@kili
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dsi: do not enable irq handler before powering up the host

[ Upstream commit bf94ec093d05e3ed3142d9291b876eeb9997ba5c ]

The DSI host might be left in some state by the bootloader. If this
state generates an IRQ, it might hang the system by holding the
interrupt line before the driver sets up the DSI host to the known
state.

Move the request_irq into msm_dsi_host_init and pass IRQF_NO_AUTOEN to
it. Call enable/disable_irq after msm_dsi_host_power_on/_off()
functions, so that we can be sure that the interrupt is delivered when
the host is in the known state.

It is not possible to defer the interrupt enablement to a later point,
because drm_panel_prepare might need to communicate with the panel over
the DSI link and that requires working interrupt.

Fixes: a689554ba6ed ("drm/msm: Initial add DSI connector support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20211002010830.647416-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

thermal/core: fix a UAF bug in __thermal_cooling_device_register()

[ Upstream commit 0a5c26712f963f0500161a23e0ffff8d29f742ab ]

When device_register() return failed, program will goto out_kfree_type
to release 'cdev->device' by put_device(). That will call thermal_release()
to free 'cdev'. But the follow-up processes access 'cdev' continually.
That trggers the UAF bug.

====================================================================
BUG: KASAN: use-after-free in __thermal_cooling_device_register+0x75b/0xa90
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
 dump_stack_lvl+0xe2/0x152
 print_address_description.constprop.0+0x21/0x140
 ? __thermal_cooling_device_register+0x75b/0xa90
 kasan_report.cold+0x7f/0x11b
 ? __thermal_cooling_device_register+0x75b/0xa90
 __thermal_cooling_device_register+0x75b/0xa90
 ? memset+0x20/0x40
 ? __sanitizer_cov_trace_pc+0x1d/0x50
 ? __devres_alloc_node+0x130/0x180
 devm_thermal_of_cooling_device_register+0x67/0xf0
 max6650_probe.cold+0x557/0x6aa
......

Freed by task 258:
 kasan_save_stack+0x1b/0x40
 kasan_set_track+0x1c/0x30
 kasan_set_free_info+0x20/0x30
 __kasan_slab_free+0x109/0x140
 kfree+0x117/0x4c0
 thermal_release+0xa0/0x110
 device_release+0xa7/0x240
 kobject_put+0x1ce/0x540
 put_device+0x20/0x30
 __thermal_cooling_device_register+0x731/0xa90
 devm_thermal_of_cooling_device_register+0x67/0xf0
 max6650_probe.cold+0x557/0x6aa [max6650]

Do not use 'cdev' again after put_device() to fix the problem like doing
in thermal_zone_device_register().

[dlezcano]: as requested by Rafael, change the affectation into two statements.

Fixes: 584837618100 ("thermal/drivers/core: Use a char pointer for the cooling device name")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20211015024504.947520-1-william.xuanziyang@huawei.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: octeontx2 - set assoclen in aead_do_fallback()

[ Upstream commit 06f6e365e2ecf799c249bb464aa9d5f055e88b56 ]

Currently, in case of aead fallback, no associated data info is set in the
fallback request. To fix this, call aead_request_set_ad() to pass the assoclen.

Fixes: 6f03f0e8b6c8 ("crypto: octeontx2 - register with linux crypto framework")
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: switch orphan_count to bare per-cpu counters

[ Upstream commit 19757cebf0c5016a1f36f7fe9810a9f0b33c0832 ]

Use of percpu_counter structure to track count of orphaned
sockets is causing problems on modern hosts with 256 cpus
or more.

Stefan Bach reported a serious spinlock contention in real workloads,
that I was able to reproduce with a netfilter rule dropping
incoming FIN packets.

    53.56%  server  [kernel.kallsyms]      [k] queued_spin_lock_slowpath
            |
            ---queued_spin_lock_slowpath
               |
                --53.51%--_raw_spin_lock_irqsave
                          |
                           --53.51%--__percpu_counter_sum
                                     tcp_check_oom
                                     |
                                     |--39.03%--__tcp_close
                                     |          tcp_close
                                     |          inet_release
                                     |          inet6_release
                                     |          sock_close
                                     |          __fput
                                     |          ____fput
                                     |          task_work_run
                                     |          exit_to_usermode_loop
                                     |          do_syscall_64
                                     |          entry_SYSCALL_64_after_hwframe
                                     |          __GI___libc_close
                                     |
                                      --14.48%--tcp_out_of_resources
                                                tcp_write_timeout
                                                tcp_retransmit_timer
                                                tcp_write_timer_handler
                                                tcp_write_timer
                                                call_timer_fn
                                                expire_timers
                                                __run_timers
                                                run_timer_softirq
                                                __softirqentry_text_start

As explained in commit cf86a086a180 ("net/dst: use a smaller percpu_counter
batch for dst entries accounting"), default batch size is too big
for the default value of tcp_max_orphans (262144).

But even if we reduce batch sizes, there would still be cases
where the estimated count of orphans is beyond the limit,
and where tcp_too_many_orphans() has to call the expensive
percpu_counter_sum_positive().

One solution is to use plain per-cpu counters, and have
a timer to periodically refresh this cache.

Updating this cache every 100ms seems about right, tcp pressure
state is not radically changing over shorter periods.

percpu_counter was nice 15 years ago while hosts had less
than 16 cpus, not anymore by current standards.

v2: Fix the build issue for CONFIG_CRYPTO_DEV_CHELSIO_TLS=m,
    reported by kernel test robot <lkp@intel.com>
    Remove unused socket argument from tcp_too_many_orphans()

Fixes: dd24c00191d5 ("net: Use a percpu_counter for orphan_count")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Stefan Bach <sfb@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: tulip: winbond-840: fix build for UML

[ Upstream commit a3d708925fcca1a2f7219bc9ce93e6341f85c1e0 ]

On i386, when builtin (not a loadable module), the winbond-840 driver
inspects boot_cpu_data to see what CPU family it is running on, and
then acts on that data. The "family" struct member (x86) does not exist
when running on UML, so prevent that test and do the default action.

Prevents this build error on UML + i386:

../drivers/net/ethernet/dec/tulip/winbond-840.c: In function ‘init_registers’:
../drivers/net/ethernet/dec/tulip/winbond-840.c:882:19: error: ‘struct cpuinfo_um’ has no member named ‘x86’
  if (boot_cpu_data.x86 <= 4) {

Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-um@lists.infradead.org
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Link: https://lore.kernel.org/r/20211014050606.7288-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: intel: igc_ptp: fix build for UML

[ Upstream commit 523994ba3ad1b7b55abe4a72e156897b5e2db825 ]

On a UML build, the igc_ptp driver uses CONFIG_X86_TSC for timestamp
conversion. The function that is used is not available on UML builds,
so have the function use the default system_counterval_t timestamp
instead for UML builds.

Prevents this build error on UML:

../drivers/net/ethernet/intel/igc/igc_ptp.c: In function ‘igc_device_tstamp_to_system’:
../drivers/net/ethernet/intel/igc/igc_ptp.c:777:9: error: implicit declaration of function ‘convert_art_ns_to_tsc’ [-Werror=implicit-function-declaration]
  return convert_art_ns_to_tsc(tstamp);
../drivers/net/ethernet/intel/igc/igc_ptp.c:777:9: error: incompatible types when returning type ‘int’ but ‘struct system_counterval_t’ was expected
  return convert_art_ns_to_tsc(tstamp);

Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-um@lists.infradead.org
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: intel-wired-lan@lists.osuosl.org
Link: https://lore.kernel.org/r/20211014050516.6846-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: fealnx: fix build for UML

[ Upstream commit cd2621d07d517473611b170c69beb6524c677740 ]

On i386, when builtin (not a loadable module), the fealnx driver
inspects boot_cpu_data to see what CPU family it is running on, and
then acts on that data. The "family" struct member (x86) does not exist
when running on UML, so prevent that test and do the default action.

Prevents this build error on UML + i386:

../drivers/net/ethernet/fealnx.c: In function ‘netdev_open’:
../drivers/net/ethernet/fealnx.c:861:19: error: ‘struct cpuinfo_um’ has no member named ‘x86’

Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-um@lists.infradead.org
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Link: https://lore.kernel.org/r/20211014050500.5620-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kernel/sched: Fix sched_fork() access an invalid sched_task_group

[ Upstream commit 4ef0c5c6b5ba1f38f0ea1cedad0cad722f00c14a ]

There is a small race between copy_process() and sched_fork()
where child->sched_task_group point to an already freed pointer.

parent doing fork()      | someone moving the parent
 | to another cgroup
  -------------------------------+-------------------------------
  copy_process()
      + dup_task_struct()<1>
  parent move to another cgroup,
  and free the old cgroup. <2>
      + sched_fork()
+ __set_task_cpu()<3>
+ task_fork_fair()
  + sched_slice()<4>

In the worst case, this bug can lead to "use-after-free" and
cause panic as shown above:

  (1) parent copy its sched_task_group to child at <1>;

  (2) someone move the parent to another cgroup and free the old
      cgroup at <2>;

  (3) the sched_task_group and cfs_rq that belong to the old cgroup
      will be accessed at <3> and <4>, which cause a panic:

  [] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
  [] PGD 8000001fa0a86067 P4D 8000001fa0a86067 PUD 2029955067 PMD 0
  [] Oops: 0000 [#1] SMP PTI
  [] CPU: 7 PID: 648398 Comm: ebizzy Kdump: loaded Tainted: G           OE    --------- -  - 4.18.0.x86_64+ #1
  [] RIP: 0010:sched_slice+0x84/0xc0

  [] Call Trace:
  []  task_fork_fair+0x81/0x120
  []  sched_fork+0x132/0x240
  []  copy_process.part.5+0x675/0x20e0
  []  ? __handle_mm_fault+0x63f/0x690
  []  _do_fork+0xcd/0x3b0
  []  do_syscall_64+0x5d/0x1d0
  []  entry_SYSCALL_64_after_hwframe+0x65/0xca
  [] RIP: 0033:0x7f04418cd7e1

Between cgroup_can_fork() and cgroup_post_fork(), the cgroup
membership and thus sched_task_group can't change. So update child's
sched_task_group at sched_post_fork() and move task_fork() and
__set_task_cpu() (where accees the sched_task_group) from sched_fork()
to sched_post_fork().

Fixes: 8323f26ce342 ("sched: Fix race in task_group")
Signed-off-by: Zhang Qiao <zhangqiao22@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lkml.kernel.org/r/20210915064030.2231-1-zhangqiao22@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>