Ben Greear [Wed, 4 Aug 2021 13:43:29 +0000 (06:43 -0700)]
mt76: mt7915: add ethtool stats support
This exposes some tx-path stats to the ethtool API, so that
ethtool -S wlanX provides some more useful info.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Sean Wang [Tue, 14 Sep 2021 15:50:22 +0000 (23:50 +0800)]
mt76: mt7921: fix retrying release semaphore without end
We should pass the error code to the caller immediately
to avoid the possible infinite retry to release the semaphore.
Fixes:
1c099ab44727 ("mt76: mt7921: add MCU support")
Co-developed-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Sean Wang [Tue, 14 Sep 2021 15:50:21 +0000 (23:50 +0800)]
mt76: mt7921: robustify hardware initialization flow
Robustify hardware initialization in the current driver probing flow
to get rid of the device is possibly lost after the machine boot due
to possible firmware abnormal state by trying to recover the failure
with more chances.
Tested-by: Leon Yen <Leon.Yen@mediatek.com>
Tested-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Tue, 14 Sep 2021 16:42:51 +0000 (18:42 +0200)]
mt76: mt7915: fix possible infinite loop release semaphore
Fix possible infinite loop in mt7915_load_patch if
mt7915_mcu_patch_sem_ctrl always returns an error.
Fixes:
e57b7901469fc ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sun, 12 Sep 2021 15:49:50 +0000 (17:49 +0200)]
mt76: mt7915: honor all possible error conditions in mt7915_mcu_init()
Check all possible errors returned in mt7915_mcu_init routine.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Xingbang Liu [Fri, 10 Sep 2021 05:39:28 +0000 (13:39 +0800)]
mt76: move spin_lock_bh to spin_lock in tasklet
as you are already in a tasklet, it is unnecessary to call spin_lock_bh.
Signed-off-by: Xingbang Liu <liu.airalert@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sat, 4 Sep 2021 10:16:47 +0000 (12:16 +0200)]
mt76: mt7921: remove mt7921_sta_stats
mt7921_sta_stats is no longer needed
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sat, 4 Sep 2021 10:16:46 +0000 (12:16 +0200)]
mt76: mt7921: remove mcu rate reporting code
Remove unused tx rate reporting through mcu tx done event since
now tx status is fully supported
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sat, 4 Sep 2021 10:16:45 +0000 (12:16 +0200)]
mt76: mt7921: report tx rate directly from tx status
Report tx rate from tx status packets instead of receiving periodic mcu
event. This improves flexibility, accuracy and AQL performance, and
simplifies code flow for better readability.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sat, 4 Sep 2021 10:16:44 +0000 (12:16 +0200)]
mt76: mt7921: add support for tx status reporting
Introduce infrastructure support for tx status reporting
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sat, 4 Sep 2021 10:16:43 +0000 (12:16 +0200)]
mt76: mt7921: start reworking tx rate reporting
Similar to mt7915, introduce mt7921_txwi_free to report tx rate to
mac80211. This is a preliminary patch to add proper tx status report.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ryder Lee [Thu, 2 Sep 2021 05:52:04 +0000 (13:52 +0800)]
mt76: mt7615: fix hwmon temp sensor mem use-after-free
Without this change, garbage is seen in the hwmon name and sensors output
for mt7615 is garbled.
Fixes:
109e505ad944 ("mt76: mt7615: add thermal sensor device support")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ben Greear [Thu, 2 Sep 2021 05:52:03 +0000 (13:52 +0800)]
mt76: mt7915: fix hwmon temp sensor mem use-after-free
Without this change, garbage is seen in the hwmon name and sensors output
for mt7915 is garbled. It appears that the hwmon logic does not make a
copy of the incoming string, but instead just copies a char* and expects
it to never go away.
Fixes:
33fe9c639c13 ("mt76: mt7915: add thermal sensor device support")
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ryder Lee [Sat, 28 Aug 2021 20:01:02 +0000 (04:01 +0800)]
mt76: mt7915: enable configured beacon tx rate
The user is allowed to change beacon tx rate (HT/VHT/HE) from hostapd.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 24 Sep 2021 15:54:40 +0000 (17:54 +0200)]
mt76: disable BH around napi_schedule() calls
napi_schedule() can call __raise_softirq_irqoff(), which can perform softirq
handling, so it must not be called in a pure process context with BH enabled.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ryder Lee [Tue, 24 Aug 2021 20:35:16 +0000 (04:35 +0800)]
mt76: fill boottime_ns in Rx path
Give a proper boottime_ns value for netlink RX to avoid scan
issues with Android.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Christophe JAILLET [Sun, 22 Aug 2021 07:39:45 +0000 (09:39 +0200)]
mt76: switch from 'pci_' to 'dma_' API
The wrappers in include/linux/pci-dma-compat.h should go away.
The patch has been generated with the coccinelle script below.
It has been compile tested.
@@
@@
- PCI_DMA_BIDIRECTIONAL
+ DMA_BIDIRECTIONAL
@@
@@
- PCI_DMA_TODEVICE
+ DMA_TO_DEVICE
@@
@@
- PCI_DMA_FROMDEVICE
+ DMA_FROM_DEVICE
@@
@@
- PCI_DMA_NONE
+ DMA_NONE
@@
expression e1, e2, e3;
@@
- pci_alloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
@@
expression e1, e2, e3;
@@
- pci_zalloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
@@
expression e1, e2, e3, e4;
@@
- pci_free_consistent(e1, e2, e3, e4)
+ dma_free_coherent(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_map_single(e1, e2, e3, e4)
+ dma_map_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_single(e1, e2, e3, e4)
+ dma_unmap_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4, e5;
@@
- pci_map_page(e1, e2, e3, e4, e5)
+ dma_map_page(&e1->dev, e2, e3, e4, e5)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_page(e1, e2, e3, e4)
+ dma_unmap_page(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_map_sg(e1, e2, e3, e4)
+ dma_map_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_sg(e1, e2, e3, e4)
+ dma_unmap_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+ dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_device(e1, e2, e3, e4)
+ dma_sync_single_for_device(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+ dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+ dma_sync_sg_for_device(&e1->dev, e2, e3, e4)
@@
expression e1, e2;
@@
- pci_dma_mapping_error(e1, e2)
+ dma_mapping_error(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_dma_mask(e1, e2)
+ dma_set_mask(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_consistent_dma_mask(e1, e2)
+ dma_set_coherent_mask(&e1->dev, e2)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
jing yangyang [Fri, 20 Aug 2021 02:41:17 +0000 (19:41 -0700)]
mt76: fix boolreturn.cocci warnings
./drivers/net/wireless/mediatek/mt76/mt7615/usb_sdio.c:172:8-9:WARNING:
return of 0/1 in function 'mt7663_usb_sdio_tx_status_data' with return
type bool
Return statements in functions returning bool should use true/false
instead of 1/0.
Generated by: scripts/coccinelle/misc/boolreturn.cocci
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: jing yangyang <jing.yangyang@zte.com.cn>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Wed, 18 Aug 2021 08:23:14 +0000 (10:23 +0200)]
mt76: mt7921: update mib counters dumping phy stats
mt7921 mac work can be idle for a long time due to runtime-pm so
update mib counters dumping phy stats
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Wed, 18 Aug 2021 08:20:57 +0000 (10:20 +0200)]
mt76: mt7921: always wake device if necessary in debugfs
Add missing device wakeup in debugfs code if we are accessing chip
registers.
Fixes:
1d8efc741df8 ("mt76: mt7921: introduce Runtime PM support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ryder Lee [Mon, 16 Aug 2021 18:37:35 +0000 (02:37 +0800)]
mt76: mt7915: rename debugfs tx-queues
Rename "queues" to "tx-queues" to reflect its meaning.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ryder Lee [Mon, 16 Aug 2021 18:37:34 +0000 (02:37 +0800)]
mt76: mt7915: rework debugfs queue info
Complete PSE/PLE queue statistics, including per-sta AC queue
information.
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Mon, 16 Aug 2021 13:11:24 +0000 (15:11 +0200)]
mt76: mt7921: move mt7921_queue_rx_skb to mac.c
As for 7915 moving mt7921_queue_rx_skb makes it possible to make
some functions in mac.c static
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 8 Sep 2021 15:46:44 +0000 (17:46 +0200)]
mt76: mt7915: fix WMM index on DBDC cards
WMM index range needs to be split between both PHYs if a second PHY exists.
The condition for that was accidentally written as checking if the vif PHY
is the secondary one
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sat, 31 Jul 2021 16:12:14 +0000 (18:12 +0200)]
mt76: mt7915: improve code readability in mt7915_mcu_sta_bfer_ht
Even if it is a not real issue, add missing brackets in
mt7915_mcu_sta_bfer_ht routine in order to improve code readability
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Fri, 2 Jul 2021 17:44:09 +0000 (19:44 +0200)]
mt76: mt7915: introduce bss coloring support
Introduce mcu APIs to configure bss coloring and to report bss coloring
collisions. Add support to report coloring countdown in beacon sent by
the device.
Co-developed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
MeiChia Chiu [Sat, 28 Aug 2021 17:02:38 +0000 (01:02 +0800)]
mt76: mt7915: add LED support
Initialize brightness_set and blink_set callbacks to enable LED support.
The base 0x7c000000 is MCU space so driver can't touch it, and should
map the LED base to 0x18000000 host's view.
Signed-off-by: MeiChia Chiu <meichia.chiu@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Money Wang <money.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ben Greear [Thu, 19 Aug 2021 20:49:43 +0000 (13:49 -0700)]
mt76: mt7915: fix potential NPE in TXS processing
If skb is null, then don't try to dereference it.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ben Greear [Wed, 4 Aug 2021 13:43:33 +0000 (06:43 -0700)]
mt76: mt7915: fix he_mcs capabilities for 160mhz
At 160, this chip can only do 2x2 NSS. Fix the features
accordingly, verified it shows up properly in iw phy foo info
now.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ryder Lee [Thu, 17 Jun 2021 20:39:00 +0000 (04:39 +0800)]
mt76: use IEEE80211_OFFLOAD_ENCAP_ENABLED instead of MT_DRV_AMSDU_OFFLOAD
Drop MT_DRV_AMSDU_OFFLOAD after introducing IEEE80211_OFFLOAD_ENCAP_ENABLED
flag in mac80211. Driver now checks vif->offload_flags to know encap offload
status of each interface.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ryder Lee [Mon, 16 Aug 2021 00:32:26 +0000 (08:32 +0800)]
mt76: mt7915: update mac timing settings
1. EIFS has been divided into OFDM/CCK fields after 11ax generation.
2. For 5G/6G SIFS setting, hardware counts extra 6us for OFDM.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Fri, 13 Aug 2021 11:26:53 +0000 (13:26 +0200)]
mt76: mt7921: fix endianness warnings in mt7921_mac_decode_he_mu_radiotap
Fix the following sparse endianness warnings
drivers/net/wireless/mediatek/mt76/mt7921/mac.c:212:28: warning: cast from restricted __le32
drivers/net/wireless/mediatek/mt76/mt7921/mac.c:212:28: warning: cast to restricted __le32
drivers/net/wireless/mediatek/mt76/mt7921/mac.c:212:28: warning: restricted __le32 degrades to integer
drivers/net/wireless/mediatek/mt76/mt7921/mac.c:212:28: warning: cast from restricted __le32
drivers/net/wireless/mediatek/mt76/mt7921/mac.c:212:28: warning: restricted __le32 degrades to integer
drivers/net/wireless/mediatek/mt76/mt7921/mac.c:217:25: warning: cast from restricted __le32
drivers/net/wireless/mediatek/mt76/mt7921/mac.c:217:25: warning: restricted __le32 degrades to integer
drivers/net/wireless/mediatek/mt76/mt7921/mac.c:217:25: warning: cast from restricted __le32
drivers/net/wireless/mediatek/mt76/mt7921/mac.c:217:25: warning: restricted __le32 degrades to integer
drivers/net/wireless/mediatek/mt76/mt7921/mac.c:222:25: warning: cast from restricted __le32
drivers/net/wireless/mediatek/mt76/mt7921/mac.c:222:25: warning: cast to restricted __le32
drivers/net/wireless/mediatek/mt76/mt7921/mac.c:222:25: warning: restricted __le32 degrades to integer
drivers/net/wireless/mediatek/mt76/mt7921/mac.c:222:25: warning: cast from restricted __le32
drivers/net/wireless/mediatek/mt76/mt7921/mac.c:222:25: warning: restricted __le32 degrades to integer
drivers/net/wireless/mediatek/mt76/mt7921/mac.c:224:25: warning: cast from restricted __le32
drivers/net/wireless/mediatek/mt76/mt7921/mac.c:224:25: warning: cast to restricted __le32
drivers/net/wireless/mediatek/mt76/mt7921/mac.c:224:25: warning: restricted __le32 degrades to integer
drivers/net/wireless/mediatek/mt76/mt7921/mac.c:224:25: warning: cast from restricted __le32
drivers/net/wireless/mediatek/mt76/mt7921/mac.c:224:25: warning: restricted __le32 degrades to integer
drivers/net/wireless/mediatek/mt76/mt7921/mac.c:259:13: warning: cast from restricted __le32
drivers/net/wireless/mediatek/mt76/mt7921/mac.c:259:13: warning: restricted __le32 degrades to integer
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Sean Wang [Fri, 13 Aug 2021 18:09:18 +0000 (02:09 +0800)]
mt76: mt7921: fix kernel warning from cfg80211_calculate_bitrate
Fix the kernel warning from cfg80211_calculate_bitrate
due to the legacy rate is not parsed well in the current driver.
Also, zeros struct rate_info before we fill it out to avoid the old value
is kept such as rate->legacy.
[ 790.921560] WARNING: CPU: 7 PID: 970 at net/wireless/util.c:1298 cfg80211_calculate_bitrate+0x354/0x35c [cfg80211]
[ 790.987738] Hardware name: MediaTek Asurada rev1 board (DT)
[ 790.993298] pstate:
a0400009 (NzCv daif +PAN -UAO)
[ 790.998104] pc : cfg80211_calculate_bitrate+0x354/0x35c [cfg80211]
[ 791.004295] lr : cfg80211_calculate_bitrate+0x180/0x35c [cfg80211]
[ 791.010462] sp :
ffffffc0129c3880
[ 791.013765] x29:
ffffffc0129c3880 x28:
ffffffd38305bea8
[ 791.019065] x27:
ffffffc0129c3970 x26:
0000000000000013
[ 791.024364] x25:
00000000000003ca x24:
000000000000002f
[ 791.029664] x23:
00000000000000d0 x22:
ffffff8d108bc000
[ 791.034964] x21:
ffffff8d108bc0d0 x20:
ffffffc0129c39a8
[ 791.040264] x19:
ffffffc0129c39a8 x18:
00000000ffff0a10
[ 791.045563] x17:
0000000000000050 x16:
00000000000000ec
[ 791.050910] x15:
ffffffd3f9ebed9c x14:
0000000000000006
[ 791.056211] x13:
00000000000b2eea x12:
0000000000000000
[ 791.061511] x11:
00000000ffffffff x10:
0000000000000000
[ 791.066811] x9 :
0000000000000000 x8 :
0000000000000000
[ 791.072110] x7 :
0000000000000000 x6 :
ffffffd3fafa5a7b
[ 791.077409] x5 :
0000000000000000 x4 :
0000000000000000
[ 791.082708] x3 :
0000000000000000 x2 :
0000000000000000
[ 791.088008] x1 :
ffffff8d3f79c918 x0 :
0000000000000000
[ 791.093308] Call trace:
[ 791.095770] cfg80211_calculate_bitrate+0x354/0x35c [cfg80211]
[ 791.101615] nl80211_put_sta_rate+0x6c/0x2c0 [cfg80211]
[ 791.106853] nl80211_send_station+0x980/0xaa4 [cfg80211]
[ 791.112178] nl80211_get_station+0xb4/0x134 [cfg80211]
[ 791.117308] genl_rcv_msg+0x3a0/0x440
[ 791.120960] netlink_rcv_skb+0xcc/0x118
[ 791.124785] genl_rcv+0x34/0x48
[ 791.127916] netlink_unicast+0x144/0x1dc
Fixes:
1c099ab44727 ("mt76: mt7921: add MCU support")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Sean Wang [Wed, 11 Aug 2021 05:58:24 +0000 (13:58 +0800)]
mt76: mt7921: fix firmware usage of RA info using legacy rates
According to the firmware usage, OFDM rates should fill out bit 6 - 13
while CCK rates should fill out bit 0 - 3 in legacy field of RA info to
make the rate adaption runs propertly. Otherwise, a unicast frame might be
picking up the unsupported rate to send out.
Fixes:
1c099ab44727 ("mt76: mt7921: add MCU support")
Reported-by: Joshua Emele <jemele@chromium.org>
Co-developed-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ryder Lee [Sat, 7 Aug 2021 03:14:23 +0000 (11:14 +0800)]
mt76: mt7915: add HE-LTF into fixed rate command
Add HE-LTF control.
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Sean Wang [Thu, 12 Aug 2021 22:48:24 +0000 (06:48 +0800)]
mt76: mt7921: report HE MU radiotap
Report HE MU/BF radiotap.
That fixed HE MU packets dropped by mac80211 because they are missing the
ieee80211_radiotap_he_mu header.
Fixes:
163f4d22c118d ("mt76: mt7921: add MAC support")
Co-developed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Co-developed-by: Eric-SY Chang <Eric-SY.Chang@mediatek.com>
Signed-off-by: Eric-SY Chang <Eric-SY.Chang@mediatek.com>
Tested-by: Eric-SY Chang <Eric-SY.Chang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sat, 7 Aug 2021 07:40:30 +0000 (09:40 +0200)]
mt76: mt7615: move mt7615_mcu_set_p2p_oppps in mt76_connac module
Move mt7615_mcu_set_p2p_oppps routine in mt76_connac_lib module in order
to be reused in mt7921 driver
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sun, 8 Aug 2021 19:11:49 +0000 (21:11 +0200)]
mt76: overwrite default reg_ops if necessary
Introduce mt76_register_debugfs_fops routine in order to
define per-driver regs file operations and make sure the
device is up before reading or writing its registers
Fixes:
1d8efc741df8 ("mt76: mt7921: introduce Runtime PM support")
Fixes:
de5ff3c9d1a2 ("mt76: mt7615: introduce pm_power_save delayed work")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Mon, 9 Aug 2021 10:37:22 +0000 (12:37 +0200)]
mt76: mt7921: introduce mt7921_mcu_set_beacon_filter utility routine
Introduce mt7921_mcu_set_beacon_filter utility routine in order to
remove duplicated code for hw beacon filtering.
Move mt7921_pm_interface_iter in debugfs since it is just used there.
Make the following routine static:
- mt7921_pm_interface_iter
- mt7921_mcu_uni_bss_bcnft
- mt7921_mcu_set_bss_pm
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Mon, 9 Aug 2021 08:38:03 +0000 (10:38 +0200)]
mt76: mt7921: get rid of mt7921_mac_set_beacon_filter
Remove mt7921_mac_set_beacon_filter routine since it is no longer used.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Mon, 9 Aug 2021 07:38:07 +0000 (09:38 +0200)]
mt76: mt7921: get rid of monitor_vif
Remove monitor_vif pointer from mt7921 since it is just a leftover of
initial porting.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
YN Chen [Wed, 4 Aug 2021 22:23:00 +0000 (06:23 +0800)]
mt76: connac: add support for limiting to maximum regulatory Tx power
Consider .max_reg_power in struct ieee80211_channel to limit the
maximum power the wireless device allowed to transmit on the
corresponding channel according to the regulatory domain.
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Leon Yen [Tue, 27 Jul 2021 22:59:16 +0000 (06:59 +0800)]
mt76: connac: fix GTK rekey offload failure on WPA mixed mode
Update the proper firmware programming sequence to fix GTK rekey
offload failure on WPA mixed mode.
In the mt76_connac_mcu_key_iter,
gtk_tlv->proto should be only set up on pairwise key
and gtk_tlk->group_cipher should be only set up on the group key.
Otherwise, those parameters required by firmware would be set
incorrectly to cause GTK rekey offload failure on WPA mixed mode
and then disconnection follows.
Fixes:
b47e21e75c80 ("mt76: mt7615: add gtk rekey offload support")
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Leon Yen <Leon.Yen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Deren Wu [Tue, 27 Jul 2021 09:47:09 +0000 (17:47 +0800)]
mt76: mt7921: fix dma hang in rmmod
The dma would be broken after rmmod flow. There are two different
cases causing this issue.
1. dma access without privilege.
2. hw access sequence borken by another context.
This patch handle both cases to avoid hw crash.
Fixes:
2b9ea5a8cf1bd ("mt76: mt7921: add mt7921_dma_cleanup in mt7921_unregister_device")
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ryder Lee [Wed, 21 Jul 2021 02:03:52 +0000 (10:03 +0800)]
mt76: add support for setting mcast rate
Mesh and ad-hoc interfaces allow users to set mcast rate through
NL80211_ATTR_MCAST_RATE, so rework mt76_default_basic_rate() to
adapt that.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Shayne Chen [Tue, 20 Jul 2021 13:00:14 +0000 (21:00 +0800)]
mt76: mt7915: fix bit fields for HT rate idx
The bit fields of tx rate idx should be 6 bits, otherwise it might be
incorrect in HT mode.
For VHT/HE rates, only 4 bits are actually used by rate idx, the other
2 bits are used for other functions.
Fixes:
c31d94af1843 ("mt76: mt7915: fix tx rate related fields in tx descriptor")
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Shayne Chen [Tue, 20 Jul 2021 13:00:13 +0000 (21:00 +0800)]
mt76: mt7915: switch proper tx arbiter mode in testmode
Switch proper tx arbiter mode during testmode tx to prevent from
entering the flow of normal tx in FW.
Also, testmode SU and MU tx need to use different arbiter mode.
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Shayne Chen [Tue, 20 Jul 2021 02:48:32 +0000 (10:48 +0800)]
mt76: mt7915: fix potential overflow of eeprom page index
If total eeprom size is divisible by per-page size, the i in for loop
will exceed max page index, which happens in our newer chipset.
Fixes:
26f18380e6ca ("mt76: mt7915: add support for flash mode")
Signed-off-by: Bo Jiao <bo.jiao@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ryder Lee [Sat, 17 Jul 2021 05:05:49 +0000 (13:05 +0800)]
mt76: mt7921: send EAPOL frames at lowest rate
The firmware rate control may choose the high rate for EAPOL frames,
so checking IEEE80211_TX_CTL_USE_MINRATE to use the lowest TX rate.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ryder Lee [Sat, 17 Jul 2021 05:05:48 +0000 (13:05 +0800)]
mt76: mt7915: send EAPOL frames at lowest rate
The firmware rate control may choose the high rate for EAPOL frames,
so checking IEEE80211_TX_CTL_USE_MINRATE to use the lowest TX rate.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ryder Lee [Sat, 17 Jul 2021 00:18:25 +0000 (08:18 +0800)]
mt76: mt7915: add control knobs for thermal throttling
With this patch, users can set the trigger/restore temperature for
thermal service according to their use cases.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Deren Wu [Thu, 15 Jul 2021 17:34:19 +0000 (01:34 +0800)]
mt76: mt7921: Add mt7922 support
Add new chip mt7922 in mt7921 module with following items
1. new chip ID / fw bin name
2. is_mt7922()
check chip type for different fw files
3. mt7921_get_data_mode()
check security type of fw (backward compatible)
Co-developed-by: Jimmy Hu <Jimmy.Hu@mediatek.com>
Signed-off-by: Jimmy Hu <Jimmy.Hu@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 21 Jul 2021 05:23:46 +0000 (07:23 +0200)]
mt76: mt7615: fix skb use-after-free on mac reset
When clearing all existing pending tx slots, mt76_tx_complete_skb needs to
be used to free the skbs, to ensure that they are cleared from the status
list as well.
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Deren Wu [Wed, 14 Jul 2021 15:50:52 +0000 (23:50 +0800)]
mt76: mt7921: Fix out of order process by invalid event pkt
The acceptable event report should inlcude original CMD-ID. Otherwise,
drop unexpected result from fw.
Fixes:
1c099ab44727c ("mt76: mt7921: add MCU support")
Signed-off-by: Jimmy Hu <Jimmy.Hu@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Sean Wang [Tue, 13 Jul 2021 20:16:01 +0000 (04:16 +0800)]
mt76: mt7915: fix mgmt frame using unexpected bitrate
Fix the current driver mgmt frame is not respecting the basic rates field
provided by the AP and then unconditionally is using the lowest (1 or 6
Mbps) rate.
For example, if the AP only supported basic rate {24, 36, 48, 54} Mbps,
mt7921 cannot send mgmt frame with the rate not in the group. So,
instead, we pick up the lowest basic rate the AP can support to send.
Fixes:
e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Suggested-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Sean Wang [Tue, 13 Jul 2021 20:16:00 +0000 (04:16 +0800)]
mt76: mt7921: fix mgmt frame using unexpected bitrate
Fix the current driver mgmt frame is not respecting the basic rates field
provided by the AP and then unconditionally is using the lowest (1 or 6
Mbps) rate.
For example, if the AP only supported basic rate {24, 36, 48, 54} Mbps,
mt7921 cannot send mgmt frame with the rate not in the group. So,
instead, we pick up the lowest basic rate the AP can support to send.
Fixes:
163f4d22c118 ("mt76: mt7921: add MAC support")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Sean Wang [Tue, 13 Jul 2021 20:15:59 +0000 (04:15 +0800)]
mt76: add mt76_default_basic_rate more devices can rely on
add mt76_default_basic_rate to mt76 core more devices can rely on
to send frames which require the rate in the basic rates.
Suggested-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Mon, 21 Jun 2021 09:23:26 +0000 (11:23 +0200)]
mt76: mt7921: introduce testmode support
We add the testmode support to access the testmode feature provided
by the MT7921 firmware.
Tested-by: Sean Wang <sean.wang@mediatek.com>
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ryder Lee [Wed, 14 Jul 2021 09:18:51 +0000 (17:18 +0800)]
mt76: mt7915: remove mt7915_sta_stats
mt7915_sta_stats is no longer needed after tx rate reworking.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ryder Lee [Wed, 14 Jul 2021 09:18:50 +0000 (17:18 +0800)]
mt76: mt7915: report tx rate directly from tx status
Report tx rate from tx status packets instead of receving periodic mcu
event. This improves flexibility, accuracy and AQL performance, and
simplifies code flow for better readability.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ryder Lee [Wed, 14 Jul 2021 09:18:49 +0000 (17:18 +0800)]
mt76: mt7915: cleanup -Wunused-but-set-variable
Cleanup -Wunused-but-set-variable everywhere in driver.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ryder Lee [Wed, 14 Jul 2021 09:18:48 +0000 (17:18 +0800)]
mt76: mt7915: take RCU read lock when calling ieee80211_bss_get_elem()
As ieee80211_bss_get_elem() derefences an RCU to return ie, both
the call to this function and any operation on this variable need
protection by the RCU read lock.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ryder Lee [Wed, 14 Jul 2021 07:56:10 +0000 (15:56 +0800)]
mt76: mt7915: fix an off-by-one bound check
The bounds check on datalen is off-by-one, so fix it.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
YN Chen [Mon, 28 Jun 2021 23:05:53 +0000 (07:05 +0800)]
mt76: mt7921: add .set_sar_specs support
add .set_sar_specs to allow configuring SAR power limitations on the
frequency ranges from the userland.
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Bo Jiao [Tue, 6 Jul 2021 10:04:26 +0000 (18:04 +0800)]
mt76: mt7915: adapt new firmware to update BA winsize for Rx session
The newer firmware requires host driver to set BA winsize
on both Tx/Rx sessions, so modify it for the long run.
Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ryder Lee [Tue, 22 Jun 2021 17:35:39 +0000 (01:35 +0800)]
mt76: mt7915: report HE MU radiotap
Report HE MU/BF radiotap.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Tue, 22 Jun 2021 07:48:30 +0000 (09:48 +0200)]
mt76: mt76x02: fix endianness warnings in mt76x02_mac.c
Fix the following sparse warning in mt76x02_mac_write_txwi and
mt76x02_mac_tx_rate_val routines:
drivers/net/wireless/mediatek/mt76/mt76x02_mac.c:237:19:
warning: restricted __le16 degrades to intege
warning: cast from restricted __le16
drivers/net/wireless/mediatek/mt76/mt76x02_mac.c:383:28:
warning: incorrect type in assignment (different base types)
expected restricted __le16 [usertype] rate
got unsigned long
Fixes:
db9f11d3433f7 ("mt76: store wcid tx rate info in one u32 reduce locking")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Wed, 23 Jun 2021 13:19:19 +0000 (15:19 +0200)]
mt76: mt7921: fix survey-dump reporting
Fix MIB tx-rx MIB counters for survey-dump reporting.
Fixes:
163f4d22c118d ("mt76: mt7921: add MAC support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Sean Wang [Sun, 20 Jun 2021 07:48:07 +0000 (15:48 +0800)]
mt76: fix build error implicit enumeration conversion
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:114:10: error: implicit
conversion from enumeration type 'enum mt76_cipher_type' to different
enumeration type 'enum mcu_cipher_type' [-Werror,-Wenum-conversion]
return MT_CIPHER_NONE;
~~~~~~ ^~~~~~~~~~~~~~
drivers/net/wireless/mediatek/mt76/mt7921/mcu.c:114:10: error: implicit
conversion from enumeration type 'enum mt76_cipher_type' to different
enumeration type 'enum mcu_cipher_type' [-Werror,-Wenum-conversion]
return MT_CIPHER_NONE;
~~~~~~ ^~~~~~~~~~~~~~
Fixes:
c368362c36d3 ("mt76: fix iv and CCMP header insertion")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Sean Wang [Sun, 20 Jun 2021 07:48:06 +0000 (15:48 +0800)]
mt76: mt7921: enable aspm by default
mt7921 is mainly used in NB, CE and IoT application where battery life is
much concerned so the patch enabled PCIe ASPM by default to shut off the
clocks related PCIe as much as possible when MT7921 is either in suspend
state or in runtime pm to lower power consumption.
We still leave disable aspm as an option with module_param for users to
disable ASPM if necessary.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Leon Yen [Thu, 8 Jul 2021 04:29:06 +0000 (12:29 +0800)]
mt76: connac: fix mt76_connac_gtk_rekey_tlv usage
The mistaken structure is introduced since we added the GTK rekey offload
to mt7663. The patch fixes mt76_connac_gtk_rekey_tlv structure according
to the MT7663 and MT7921 firmware we have submitted into
linux-firmware.git.
Fixes:
b47e21e75c80 ("mt76: mt7615: add gtk rekey offload support")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Leon Yen <Leon.Yen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Bo Jiao [Tue, 6 Jul 2021 10:56:54 +0000 (18:56 +0800)]
mt76: mt7915: fix calling mt76_wcid_alloc with incorrect parameter
It will cause maximum connectable STA to be one less
when calling mt76_wcid_alloc with parameter MT7915_WTBL_STA - 1.
Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Dan Carpenter [Fri, 25 Jun 2021 14:58:54 +0000 (17:58 +0300)]
mt76: mt7915: fix info leak in mt7915_mcu_set_pre_cal()
Zero out all the unused members of "req" so that we don't disclose
stack information.
Fixes:
495184ac91bb ("mt76: mt7915: add support for applying pre-calibration data")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Mon, 21 Jun 2021 21:53:22 +0000 (23:53 +0200)]
mt76: mt7615: fix endianness warning in mt7615_mac_write_txwi
Fix the following sparse warning in mt7615_mac_write_txwi routine:
drivers/net/wireless/mediatek/mt76/mt7615/mac.c:758:17:
warning: incorrect type in assignment
expected restricted __le32 [usertype]
got unsigned long
Fixes:
04b8e65922f63 ("mt76: add mac80211 driver for MT7615 PCIe-based chipsets")
Fixes:
d4bf77bd74930 ("mt76: mt7615: introduce mt7663u support to mt7615_write_txwi")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Mon, 21 Jun 2021 09:18:58 +0000 (11:18 +0200)]
mt76: mt7921: fix endianness warning in mt7921_update_txs
Fix the following sparse warning in mt7921_update_txs routine:
drivers/net/wireless/mediatek/mt76/mt7921/mac.c:752:31:
warning: cast to restricted __le32
drivers/net/wireless/mediatek/mt76/mt7921/mac.c:752:31:
warning: restricted __le32 degrades to integer
Fixes:
e5bca8c5d2cd3 ("mt76: mt7921: improve code readability for mt7921_update_txs")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Mon, 21 Jun 2021 08:21:31 +0000 (10:21 +0200)]
mt76: mt7915: fix endianness warning in mt7915_mac_add_txs_skb
Fix the following sparse warning in mt7915_mac_add_txs_skb routine:
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:1235:29:
warning: cast to restricted __le32
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:1235:23:
warning: restricted __le32 degrades to integer
Fixes:
3de4cb1756565 ("mt76: mt7915: add support for tx status reporting")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sat, 19 Jun 2021 18:19:58 +0000 (20:19 +0200)]
mt76: mt7921: avoid unnecessary spin_lock/spin_unlock in mt7921_mcu_tx_done_event
Do not grab the spinlock in mt7921_mcu_tx_done_event routine if not
necessary.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sat, 19 Jun 2021 18:18:19 +0000 (20:18 +0200)]
mt76: mt7921: fix endianness in mt7921_mcu_tx_done_event
Fix endianness in mt7921_mcu_tx_done_event event reported by the
firmware.
Fixes:
3cce2b98e0241 ("mt76: mt7921: introduce mac tx done handling")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Colin Ian King [Fri, 15 Oct 2021 15:21:13 +0000 (16:21 +0100)]
rtw89: Remove redundant check of ret after call to rtw89_mac_enable_bb_rf
The function rtw89_mac_enable_bb_rf is a void return type, so there is
no return error code to ret, so the following check for an error in ret
is redundant dead code and can be removed.
Addresses-Coverity: ("Logically dead code")
Fixes:
e3ec7017f6a2 ("rtw89: add Realtek 802.11ax driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211015152113.33179-1-colin.king@canonical.com
Colin Ian King [Fri, 15 Oct 2021 10:50:04 +0000 (11:50 +0100)]
rtw89: Fix two spelling mistakes in debug messages
There are two spelling mistakes in rtw89_debug messages. Fix them.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211015105004.11817-1-colin.king@canonical.com
Ping-Ke Shih [Wed, 13 Oct 2021 09:28:27 +0000 (17:28 +0800)]
MAINTAINERS: add rtw89 wireless driver
Add maintainer and email to MAINTAINERS file.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211013092827.43642-1-pkshih@realtek.com
Jonas Dreßler [Mon, 11 Oct 2021 13:32:24 +0000 (15:32 +0200)]
mwifiex: Try waking the firmware until we get an interrupt
It seems that the PCIe+USB firmware (latest version 15.68.19.p21) of the
88W8897 card sometimes ignores or misses when we try to wake it up by
writing to the firmware status register. This leads to the firmware
wakeup timeout expiring and the driver resetting the card because we
assume the firmware has hung up or crashed.
Turns out that the firmware actually didn't hang up, but simply "missed"
our wakeup request and didn't send us an interrupt with an AWAKE event.
Trying again to read the firmware status register after a short timeout
usually makes the firmware wake up as expected, so add a small retry
loop to mwifiex_pm_wakeup_card() that looks at the interrupt status to
check whether the card woke up.
The number of tries and timeout lengths for this were determined
experimentally: The firmware usually takes about 500 us to wake up
after we attempt to read the status register. In some cases where the
firmware is very busy (for example while doing a bluetooth scan) it
might even miss our requests for multiple milliseconds, which is why
after 15 tries the waiting time gets increased to 10 ms. The maximum
number of tries it took to wake the firmware when testing this was
around 20, so a maximum number of 50 tries should give us plenty of
safety margin.
Here's a reproducer for those firmware wakeup failures I've found:
1) Make sure wifi powersaving is enabled (iw dev wlp1s0 set power_save on)
2) Connect to any wifi network (makes firmware go into wifi powersaving
mode, not deep sleep)
3) Make sure bluetooth is turned off (to ensure the firmware actually
enters powersave mode and doesn't keep the radio active doing bluetooth
stuff)
4) To confirm that wifi powersaving is entered ping a device on the LAN,
pings should be a few ms higher than without powersaving
5) Run "while true; do iwconfig; sleep 0.0001; done", this wakes and
suspends the firmware extremely often
6) Wait until things explode, for me it consistently takes <5 minutes
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=109681
Cc: stable@vger.kernel.org
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211011133224.15561-3-verdre@v0yd.nl
Jonas Dreßler [Mon, 11 Oct 2021 13:32:23 +0000 (15:32 +0200)]
mwifiex: Read a PCI register after writing the TX ring write pointer
On the 88W8897 PCIe+USB card the firmware randomly crashes after setting
the TX ring write pointer. The issue is present in the latest firmware
version 15.68.19.p21 of the PCIe+USB card.
Those firmware crashes can be worked around by reading any PCI register
of the card after setting that register, so read the PCI_VENDOR_ID
register here. The reason this works is probably because we keep the bus
from entering an ASPM state for a bit longer, because that's what causes
the cards firmware to crash.
This fixes a bug where during RX/TX traffic and with ASPM L1 substates
enabled (the specific substates where the issue happens appear to be
platform dependent), the firmware crashes and eventually a command
timeout appears in the logs.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=109681
Cc: stable@vger.kernel.org
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211011133224.15561-2-verdre@v0yd.nl
Christophe JAILLET [Sun, 10 Oct 2021 07:09:11 +0000 (09:09 +0200)]
wireless: Remove redundant 'flush_workqueue()' calls
'destroy_workqueue()' already drains the queue before destroying it, so
there is no need to flush it explicitly.
Remove the redundant 'flush_workqueue()' calls.
This was generated with coccinelle:
@@
expression E;
@@
- flush_workqueue(E);
destroy_workqueue(E);
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/0855d51423578ad019c0264dad3fe47a2e8af9c7.1633849511.git.christophe.jaillet@wanadoo.fr
Colin Ian King [Thu, 7 Oct 2021 23:41:53 +0000 (00:41 +0100)]
mt7601u: Remove redundant initialization of variable ret
The variable ret is being initialized with a value that is never read,
it is assigned later on with a different value. The initialization is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211007234153.31222-1-colin.king@canonical.com
Colin Ian King [Thu, 7 Oct 2021 16:37:22 +0000 (17:37 +0100)]
rtlwifi: rtl8192ee: Remove redundant initialization of variable version
The variable version is being initialized with a value that is
never read, it is being updated afterwards in both branches of
an if statement. The assignment is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211007163722.20165-1-colin.king@canonical.com
Ping-Ke Shih [Mon, 11 Oct 2021 11:47:27 +0000 (14:47 +0300)]
rtw89: add Realtek 802.11ax driver
This driver named rtw89, which is the next generation of rtw88, supports
Realtek 8852AE 802.11ax 2x2 chip whose new features are OFDMA, DBCC,
Spatial reuse, TWT and BSS coloring; now some of them aren't implemented
though.
The chip architecture is entirely different from the chips supported by
rtw88 like RTL8822CE 802.11ac chip. First of all, register address ranges
are totally redefined, so it's impossible to reuse register definition. To
communicate with firmware, new H2C/C2H format is proposed. In order to have
better utilization, TX DMA flow is changed to two stages DMA. To provide
rich RX status information, additional RX PPDU packets are added.
Since there are so many differences mentioned above, we decide to propose
a new driver. It has many authors, they are listed in alphabetic order:
Chin-Yen Lee <timlee@realtek.com>
Ping-Ke Shih <pkshih@realtek.com>
Po Hao Huang <phhuang@realtek.com>
Tzu-En Huang <tehuang@realtek.com>
Vincent Fann <vincent_fann@realtek.com>
Yan-Hsuan Chuang <tony0620emma@gmail.com>
Zong-Zhe Yang <kevin_yang@realtek.com>
Tested-by: Aaron Ma <aaron.ma@canonical.com>
Tested-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211008035627.19463-1-pkshih@realtek.com
Dan Carpenter [Wed, 6 Oct 2021 07:36:22 +0000 (10:36 +0300)]
b43: fix a lower bounds test
The problem is that "channel" is an unsigned int, when it's less 5 the
value of "channel - 5" is not a negative number as one would expect but
is very high positive value instead.
This means that "start" becomes a very high positive value. The result
of that is that we never enter the "for (i = start; i <= end; i++) {"
loop. Instead of storing the result from b43legacy_radio_aci_detect()
it just uses zero.
Fixes:
ef1a628d83fc ("b43: Implement dynamic PHY API")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Michael Büsch <m@bues.ch>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211006073621.GE8404@kili
Dan Carpenter [Wed, 6 Oct 2021 07:35:42 +0000 (10:35 +0300)]
b43legacy: fix a lower bounds test
The problem is that "channel" is an unsigned int, when it's less 5 the
value of "channel - 5" is not a negative number as one would expect but
is very high positive value instead.
This means that "start" becomes a very high positive value. The result
of that is that we never enter the "for (i = start; i <= end; i++) {"
loop. Instead of storing the result from b43legacy_radio_aci_detect()
it just uses zero.
Fixes:
75388acd0cd8 ("[B43LEGACY]: add mac80211-based driver for legacy BCM43xx devices")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Michael Büsch <m@bues.ch>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211006073542.GD8404@kili
Subbaraya Sundeep [Sun, 10 Oct 2021 10:09:35 +0000 (15:39 +0530)]
octeontx2-pf: Simplify the receive buffer size calculation
This patch separates the logic of configuring hardware
maximum transmit frame size and receive frame size.
This simplifies the logic to calculate receive buffer
size and using cqe descriptor of different size.
Also additional size of skb_shared_info structure is
allocated for each receive buffer pointer given to
hardware which is not necessary. Hence change the
size calculation to remove the size of
skb_shared_info. Add a check for array out of
bounds while adding fragments to the network stack.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christophe JAILLET [Sun, 10 Oct 2021 07:01:32 +0000 (09:01 +0200)]
ethernet: Remove redundant 'flush_workqueue()' calls
'destroy_workqueue()' already drains the queue before destroying it, so
there is no need to flush it explicitly.
Remove the redundant 'flush_workqueue()' calls.
This was generated with coccinelle:
@@
expression E;
@@
- flush_workqueue(E);
destroy_workqueue(E);
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com> #mlx*
Signed-off-by: David S. Miller <davem@davemloft.net>
Li RongQing [Sat, 9 Oct 2021 09:32:43 +0000 (17:32 +0800)]
virtio_net: skip RCU read lock by checking xdp_enabled of vi
networking benchmark shows that __rcu_read_lock and
__rcu_read_unlock takes some cpu cycles, and we can avoid
calling them partially in virtio rx path by check xdp_enabled
of vi, and xdp is disabled most of time
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Antoine Tenart [Fri, 8 Oct 2021 14:21:03 +0000 (16:21 +0200)]
net: make dev_get_port_parent_id slightly more readable
Cosmetic commit making dev_get_port_parent_id slightly more readable.
There is no need to split the condition to return after calling
devlink_compat_switch_id_get and after that 'recurse' is always true.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ansuel Smith [Sat, 9 Oct 2021 22:46:18 +0000 (00:46 +0200)]
net: phy: at803x: better describe debug regs
Give a name to known debug regs from Documentation instead of using
unknown hex values.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ansuel Smith [Sat, 9 Oct 2021 22:46:17 +0000 (00:46 +0200)]
net: phy: at803x: enable prefer master for 83xx internal phy
From original QCA source code the port was set to prefer master as port
type in 1000BASE-T mode. Apply the same settings also here.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ansuel Smith [Sat, 9 Oct 2021 22:46:16 +0000 (00:46 +0200)]
net: phy: at803x: add DAC amplitude fix for 8327 phy
QCA8327 internal phy require DAC amplitude adjustement set to +6% with
100m speed. Also add additional define to report a change of the same
reg in QCA8337. (different scope it does set 1000m voltage)
Add link_change_notify function to set the proper amplitude adjustement
on PHY_RUNNING state and disable on any other state.
Fixes:
b4df02b562f4 ("net: phy: at803x: add support for qca 8327 A variant internal phy")
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ansuel Smith [Sat, 9 Oct 2021 22:46:15 +0000 (00:46 +0200)]
net: phy: at803x: fix resume for QCA8327 phy
From Documentation phy resume triggers phy reset and restart
auto-negotiation. Add a dedicated function to wait reset to finish as
it was notice a regression where port sometime are not reliable after a
suspend/resume session. The reset wait logic is copied from phy_poll_reset.
Add dedicated suspend function to use genphy_suspend only with QCA8337
phy and set only additional debug settings for QCA8327. With more test
it was reported that QCA8327 doesn't proprely support this mode and
using this cause the unreliability of the switch ports, especially the
malfunction of the port0.
Fixes:
15b9df4ece17 ("net: phy: at803x: add resume/suspend function to qca83xx phy")
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 10 Oct 2021 10:18:48 +0000 (11:18 +0100)]
Merge branch 'net-use-helpers'
Juhee Kang says:
====================
net-next: replace open code with helper functions
Currently, there are many helper functions on netdevice.h. However,
some code doesn't use the helper functions and remains open code.
So this patchset replaces open code with an appropriate helper function.
First patch modifies to use netif_is_rxfh_configured instead of
dev->priv_flags & IFF_RXFH_CONFIGURED.
Second patch replaces open code with netif_is_bond_master.
Last patch substitutes netif_is_macsec() for dev->priv_flags & IFF_MACSEC.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Juhee Kang [Sun, 10 Oct 2021 04:03:29 +0000 (13:03 +0900)]
mlxsw: spectrum: use netif_is_macsec() instead of open code
Open code which is dev->priv_flags & IFF_MACSEC has already defined as
netif_is_macsec(). So use netif_is_macsec() instead of open code.
This patch doesn't change logic.
Signed-off-by: Juhee Kang <claudiajkang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Juhee Kang [Sun, 10 Oct 2021 04:03:28 +0000 (13:03 +0900)]
hv_netvsc: use netif_is_bond_master() instead of open code
Use netif_is_bond_master() function instead of open code, which is
((event_dev->priv_flags & IFF_BONDING) && (event_dev->flags & IFF_MASTER)).
This patch doesn't change logic.
Signed-off-by: Juhee Kang <claudiajkang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
projects / platform / kernel / linux-starfive.git / log