* corelow.c (core_close): Don't hardcode the core's pid.
(core_open): Find core threads before calling
post_create_inferior.
(add_to_thread_list, get_core_register_section): Take into account
systems where the regset section names encode the pid of the
inferior.

* gdbarch.sh (core_reg_section_encodes_pid): New gdbarch setting.
* gdbarch.h, gdbarch.c: Regenerate.

* amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
* i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
* sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
* sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.

daily update

*** empty log message ***

* elf-hppa.h (elf_hppa_final_link_relocate): Correct addend value used
in branch offset check.

* elf64-ppc.c (struct _ppc64_elf_section_data): Delete t_symndx,
add toc.symndx and toc.add.
(ppc64_elf_check_relocs): Don't set htab->tls_get_addr here.
Set up toc.add.
(get_tls_mask): Add toc_addend param, set from toc.add.  Adjust all
callers.
(ppc64_elf_tls_setup): Set htab->tls_get_addr and tls_get_addr_fd.
(branch_reloc_hash_match): New function, extracted from..
(ppc64_elf_tls_optimize): ..here.
(ppc64_elf_relocate_section): Properly set addends when optimizing
tls sequences.  Avoid unnecessary reading and writing of insns.
Only redo reloc when symbol changed.  Bypass symbol checks when
using tlsld_got.
* elf32-ppc.c (ppc_elf_tls_setup): Correct comment.
(branch_reloc_hash_match): New function, extracted from..
(ppc_elf_tls_optimize): ..here.
(ppc_elf_relocate_section): Avoid unnecessary reading of insns.
Don't clear addend on zapped __tls_get_addr reloc.

daily update

*** empty log message ***

Adding gdb.python/python-cmd.exp which I forgot to commit earlier.

    Include frame information for *stopped due to CLI commands.

        * ada-tasks.c (ada_normal_stop_observer): Adjust prototype.
        * infcmd.c (finish_command_continuation): Pass '1' for
        'print_frame' parameter to the observer.
        * infrun.c (normal_stop): Don't print mi-specific information
        here. Pass 'stop_print_frame' to the 'print_frame' parameter
        of the observer.
        * mi/mi-interp.c (mi_on_normal_stop): Adjust prototype.
        If we need to print frame, and current uiout is not the MI one,
        print frame again.

* lib/gdb.exp (get_hexadecimal_valueof): New procedure.
* gdb.base/pc-fp.exp (get_valueofx): Remove.
Replace calls to get_valueofx by get_hexadecimal_valueof.

* remote-utils.c (getpkt): Also generate remote-debug
information if noack_mode is set.

*** empty log message ***

daily update

* lib/gdb.exp (get_valueof): Accept anything as a return value.
(get_integer_valueof): New procedure.
(get_sizeof): Use new get_integer_value_of.
* gdb.base/sizeof.exp: Replace all uses of get_valueof
by get_integer_valueof.

2009-02-13  Pierre Muller  <muller@ics.u-strasbg.fr>

* xtensa-tdep.c (call0_analyze_prologue): Delete BSZ macro.
Replace BSZ macro uses by XTENSA_ISA_BSZ macro.

(From Rafael Espindola)
* archive.cc (Archive::include_member): Update calls to add_symbols.
* dynobj.cc (Sized_dynobj<size, big_endian>::make_version_map): Add
the Layout argument.
* dynobj.h (do_add_symbols): Add the Layout argument.
* object.cc (Sized_relobj<size, big_endian>::do_add_symbols): Add the
Layout argument.
* object.h (Object::add_symbols): Add the Layout argument.
(Object::do_add_symbols): Add the Layout argument.
(Sized_relobj::do_add_symbols): Add the Layout argument.
* plugin.cc (Sized_pluginobj<size, big_endian>::do_add_symbols):
Unify the two versions.
(Add_plugin_symbols): Remove.
* plugin.h (Pluginobj::add_symbols, Pluginobj::do_add_symbols): Remove.
(Sized_pluginobj::do_add_symbols): Unify the two versions.
(Add_plugin_symbols): Remove.
* readsyms.cc (Read_symbols::do_read_symbols): Update call to
Add_symbols. Use Add_symbols instead of Add_plugin_symbols.
(Add_symbols::run): Make it work with Pulginobj.

* gdb.base/remote.exp (get_sizeof): Remove.
* gdb.base/long_long.exp (get_valueof, get_sizeof): Remove.
* gdb.base/dfp-test.exp (get_valueof, get_sizeof): Remove.
* gdb.base/sizeof.exp (get_valueof, get_sizeof): Remove.
* lib/gdb.exp (get_valueof): Move from long_long.exp.
(get_sizeof): Likewise.

*** empty log message ***

daily update

Fix a typo.

    PR 9827
        * elflink.c (bfd_elf_final_link): When counting the relocations,
        if the header size has not been set yet then assume that it will
        match the output section's reloc type.

    * corefile.c (core_create_function_syms): Remove "<locore>" and
        "<hicore>" sentinels.
        * gprof.c: Likewise.
        * cg_print.c (cg_print_function_ordering): Likewise.
        * alpha.c (alpha_find_call): Add check for return value of sym_lookup.
        * mips.c (mips_find_call): Likewise.
        * sparc.c (sparc_find_call): Likewise.
        * tahoe.c (tahoe_find_call): Likewise.
        * vax.c (vax_find_call): Likewise.

gdb/
PR fortran/9806
* dwarf2read.c (process_die <DW_TAG_module>, read_module)
(scan_partial_symbols <DW_TAG_module>, add_partial_module): New.

gdb/testsuite/
PR fortran/9806
* gdb.fortran/module.exp, gdb.fortran/module.f90: New.

gas/
* config/tc-m68k.c (mcf51qe_ctrl): Add CPUCR.
(mcf52259_ctrl, mcf52277_ctrl, mcf53017_ctrl): New.
(mcf5307_ctrl): Add VBR.
(no_mac): New variable.
(m68k_extensions): Refer to no_mac mask.
(m68k_cpus): Add 51, 51ac, 51cn, 51em, 51jm, 52274, 52277,
52252..52259, 53011..53017.
(m68k_ip): Process CPUCR.
(init_table): Add cpucr entry.
(m68k_set_extension): Allow negated mask to refer to a variable.
(md_show_usage): Use '%s' to silence fprintf warning.
* config/m68k-parse.h (CPUCR): New control register.

gas/testsuite/
* m68k/br-isac.d, m68k/br-isac.s: Add stldsr test.

opcodes/
* m68k-opc.c (m68k_opcodes): Add stldsr instruction.

* elf32-mips.c (mips_elf_final_gp): Don't add 0x4000 offset for
relocatable link.

*** empty log message ***

daily update

2009-02-11  Pierre Muller  <muller@ics.u-strasbg.fr>

* dwarf2read.c (read_base_type): Set code to TYPE_CODE_CHAR
for DW_ATE_signed_char and DW_ATE_unisgned_char
for pascal language.

Avoid NULL dereference.
* stack.c (return_command): Guard use of SYMBOL_TYPE (thisfun).
New variable func_type.

* gdbarch.c: Regenerate.

*** empty log message ***

daily update

merge from gcc

* config/tc-ppc.c (ppc_insert_operand, md_assemble): Use '%s' for
as_bad calls to silence compiler warning.

2009-02-06  Paul Pluzhnikov  <ppluzhnikov@google.com>

* gdb.cp/pr9594.cc: Prevent GCC from optimizing 'a' out.

2009-02-10  Pierre Muller  <muller@ics.u-strasbg.fr>

* p-lang.c (is_pascal_string_type): Fix comment.
Determine exact size of char elements for GPC
strings.
(pascal_printstr): Handle char width of 2 or 4.
* p-valprint.c (pascal_val_print): Handle char
of width 2 or 4.

*** empty log message ***

daily update

2009-02-09  Kai Tietz  <kai.tietz@onevision.com>

* windres.c (set_endianess): Copy name without leading '-'.

Missing piece of 2009-01-26 commit
* ldlang.c (lang_process): Don't consider relocatable flag when
checking for overlap.

* elf32-spu.c (spu_elf_find_overlays): Call bfd_set_error on errors.
(find_function): Likewise.
(pasted_function): Don't error if no prior function found.
(discover_functions): Revert 2008-12-10 change.  Extend first
function range to start of section.

2009-02-09  Tristan Gingold  <gingold@adacore.com>

* NEWS: Mention feature match between objdump and readelf for dumping
dwarf info.

* doc/binutils.texi (objdump): Document -W/--dwarf improvments to
objdump.

* objdump.c (usage): Update documentation for -W/--dwarf.
(enum option_values): Add OPTION_DWARF.
(long_options): --dwarf can accept arguments.
(dump_dwarf_section): Also check enabled field.
(main): Option -W can accept arguments, code moved to
dwarf.c and call dwarf_select_sections_all instead.
* readelf.c (process_section_headers): Remove do_debug_lines_decoded.
(parse_args): Move code to...
* dwarf.c (dwarf_select_sections_by_letters,
dwarf_select_sections_by_names): : ...here (new functions).
(do_debug_lines_decoded): Remove and replaced by ...
(FLAG_DEBUG_LINES_RAW, FLAG_DEBUG_LINES_DECODED): ... new macros.
(display_debug_lines): Adjust for previous change.
(dwarf_select_sections_all): New function.
(debug_displays): Add initializer for enabled field.
* dwarf.h (do_debug_lines_decoded): Remove.
Add prototypes for the new functions.
(struct dwarf_section_display): Add enabled field.

* dwarf2read.c (dwarf2_build_psymtabs_hard): Move lowpc and highpc
inside the loop.  Only call addrmap_set_empty if the compilation unit
had DW_AT_high_pc and DW_AT_low_pc.  Update call to
scan_partial_symbols.
(scan_partial_symbols): Take NEED_PC argument and pass it along with
LOWPC and HIGHPC.
(add_partial_namespace): Take NEED_PC argument and pass it through.
(add_partial_subprogram): Take NEED_PC argument.  Update the addrmap
if necessary.

*** empty log message ***

daily update

* elf64-hppa.c: Remove PARAMS macro.  Replace PTR with void *.  Convert
functions to C90.
* elf64-hppa.h: Likewise.

*** empty log message ***

* dwarf2read.c (dwarf2_build_psymtabs_hard): Move lowpc and highpc
inside the loop.  Only call addrmap_set_empty if the compilation unit
had DW_AT_high_pc and DW_AT_low_pc.  Update call to
scan_partial_symbols.
(scan_partial_symbols): Take NEED_PC argument and pass it along with
LOWPC and HIGHPC.
(add_partial_namespace): Take NEED_PC argument and pass it through.
(add_partial_subprogram): Take NEED_PC argument.  Update the addrmap
if necessary.

* NEWS: Mention inspecting extra signal information, $_siginfo,
and the qXfer:siginfo:read and qXfer:siginfo:write packets.

* linux-nat.c (PTRACE_SETSIGINFO): Define if PTRACE_GETSIGINFO
isn't defined.

*** empty log message ***

(Basic Python): Fix change from 2009-02-04.
(Commands In Python): Fix COMMAND_* constants in last change.  Use @kbd for
interactive input.  Add cross-references and index entries.

* object.cc (Sized_relobj::do_layout): Make info message start
with lower case letter.

* binary.cc: Fix file comment.

daily update

*** empty log message ***

* options.h (enum Incremental_disposition): Define.
(class General_options): Add new options: --incremental,
--incremental_changed, --incremental_unchanged,
--incremental_unknown.  Add incremental_disposition_ and
implicit_incremental_ fields.
(General_options::incremental_disposition): New function.
(class Position_dependent_options): Add incremental_disposition
option.
(Position_dependent_options::copy_from_options): Set incremental
dispositions.
* options.cc (General_options::parse_incremental_changed): New
function.
        (General_options::parse_incremental_unchanged): New function.
        (General_options::parse_incremental_unknown): New function.
        (General_options::General_options): Initialize new fields
incremental_disposition_ and implicit_incremental_.
        (General_options::finalize): Check for uasge of --incremental-*
without --incremental.

* i386.h: Add comment regarding sse* insns and prefixes.

* amd64-linux-nat.c (compat_int_t, compat_uptr_t, compat_time_t)
(compat_timer_t, compat_clock_t, struct compat_timeval)
(compat_sigval_t, compat_siginfo_t): New types.
(cpt_si_pid, cpt_si_uid, cpt_si_timerid, cpt_si_overrun)
(cpt_si_status, cpt_si_utime, cpt_si_stime, cpt_si_ptr)
(cpt_si_addr, cpt_si_band, cpt_si_fd): New defines.
(compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
(amd64_linux_siginfo_fixup): New.
* linux-nat.c (linux_nat_siginfo_fixup): New.
(siginfo_fixup): New.
(linux_xfer_siginfo): Use siginfo_fixup to convert between the
siginfo layout expected by ptrace and the siginfo layout of the
inferior.
(linux_nat_set_siginfo_fixup): New.
* linux-nat.h (linux_nat_set_siginfo_fixup): Declare.

2009-02-06  Pedro Alves  <pedro@codesourcery.com>

gdb/
* target.h (enum target_object): Add new TARGET_OBJECT_SIGNAL_INFO.
* infrun.c (siginfo_value_read, siginfo_value_write): New.
(siginfo_value_funcs): New.
(siginfo_make_value): New.
(_initialize_infrun): Create the $_siginfo convenience variable.
* gdbtypes.h (append_composite_type_field_aligned): Declare.
* gdbtypes.c (append_composite_type_field): Rename to...
(append_composite_type_field_aligned): ... this.  Add ALIGNMENT
argument.  Handle it.
(append_composite_type_field): Rewrite on top of
append_composite_type_field_aligned.
* value.h (internalvar_make_value): New typedef.
(struct internalvar) <make_value>: New field.
(create_internalvar_type_lazy): Declare.
* value.c (create_internalvar): Clear make_value.
(create_internalvar_type_lazy): New.
(value_of_internalvar): If make_value is set use it.
(preserve_values): Skip internal variables that don't have a
value.
* gdbarch.sh (get_siginfo_type): New.
* gdbarch.h, gdbarch.c: Regenerate.

* linux-tdep.h, linux-tdep.c: New.
* amd64-linux-tdep.c: Include "linux-tdep.h".
(amd64_linux_init_abi): Register linux_get_siginfo_type and
linux_get_siginfo_mapper.
* i386-linux-tdep.c: Include "linux-tdep.h".
(i386_linux_init_abi): Register linux_get_siginfo_type and
linux_get_siginfo_mapper.
* arm-linux-tdep.c: Include "linux-tdep.h".
(i386_linux_init_abi): Register linux_get_siginfo_type and
linux_get_siginfo_mapper.

* linux-nat.c (linux_xfer_siginfo): New.
(linux_nat_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
* remote.c (PACKET_qXfer_siginfo_read)
(PACKET_qXfer_siginfo_write): New.
(feature remote_protocol_features): Add "qXfer:siginfo:read" and
"qXfer:siginfo:write" features.
(remote_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
(_initialize_remote): Add "set/show remote read-siginfo-object"
and "set/show remote write-siginfo-object" commands.

* Makefile.in (ALL_TARGET_OBS): Add linux-tdep.o.
(HFILES_NO_SRCDIR): Add linux-tdep.h.
(ALLDEPFILES): Add linux-tdep.c.

* configure.tgt (arm*-*-linux* | arm*-*-uclinux*)
(i[34567]86-*-linux*, x86_64-*-linux*): Add linux-tdep.o to
gdb_target_obs.

2009-02-06  Pedro Alves  <pedro@codesourcery.com>

gdb/gdbserver/
* server.c (handle_query): Report qXfer:siginfo:read and
qXfer:siginfo:write as supported and handle them.
* target.h (struct target_ops) <qxfer_siginfo>: New field.
* linux-low.c (linux_xfer_siginfo): New.
(linux_target_ops): Set it.

2009-02-06  Pedro Alves  <pedro@codesourcery.com>

gdb/doc/
* gdb.texinfo (Signals): Document $_siginfo.
(Convenience Variables): Mention $_siginfo.
(Remote Configuration): Document qXfer:siginfo:read,
qXfer:siginfo:write packets, and the read-siginfo-object,
write-siginfo-object commands.

2009-02-06  Pedro Alves  <pedro@codesourcery.com>

gdb/testsuite/
* gdb.base/siginfo-obj.c, gdb.base/siginfo-obj.exp: New.

gdb/
2009-02-06  Jim Blandy  <jimb@codesourcery.com>
    Daniel Jacobowitz  <dan@codesourcery.com>
    Vladimir Prus  <vladimir@codesourcery.com>
    Pedro Alves  <pedro@codesourcery.com>

* defs.h (enum lval_type): New value: lval_computed.
* value.h (struct lval_funcs): New type.
(allocate_computed_value, value_computed_funcs)
(value_computed_closure): New declarations.
* value.c (struct value): Add a structure to the location union
for computed lvalues, containing 'funcs' and 'closure' members.
(allocate_computed_value, value_computed_funcs)
(value_computed_closure): New functions.
(value_free): For computed lvalues, call the closure's
'free_closure' function before freeing the value itself.
(value_copy): If we're copying an lval_computed value, call the
closure's 'copy_closure' function.
(set_value_component_location): If the original value is a
computed lvalue, then call the closure's 'copy_closure' function.
(value_of_internalvar): If an internal variable's value is a
computed lvalue, make retrieving its value produce an equivalent
computed lvalue.
* valops.c (value_fetch_lazy): Unlazy computed lvalues by calling
their read function.
(value_assign): Assign to computed lvalues by calling their write
function.

gdb/doc/
2009-02-06  Pedro Alves  <pedro@codesourcery.com>

* gdbint.texinfo (Values): New chapter.

* linux-nat.c (linux_nat_wait): Adjust.
(linux_nat_pid_to_str): Adjust.  Remove call to thread_db_init.
* linux-nat.h (thread_db_init): Delete declaration.
* linux-thread-db.c (target_beneath): Delete.
(thread_db_init): Delete.
(thread_db_detach): Use find_target_beneath.
(thread_db_wait): Adjust interface.  Use find_target_beneath.
(thread_db_mourn_inferior): Use find_target_beneath.
(thread_db_can_async_p, thread_db_is_async_p, thread_db_async)
(thread_db_async_mask): Delete.
(thread_db_pid_to_str): Adjust interface.  Use
find_target_beneath.
(thread_db_get_thread_local_address): Adjust interface.  Use
find_target_beneath.
(init_thread_db_ops): Delete references to delete functions.
* target.c (update_current_target): Don't inherit or default
to_wait.  Don't inherit to_pid_to_str and
to_get_thread_local_address.
(target_translate_tls_address): Look for a pushed target that
implements to_get_thread_local_address, and use it instead of
checking for target_get_thread_local_address_p.
(target_wait, target_pid_to_str): Reimplement as functions.
(dummy_pid_to_str): New.
(init_dummy_target): Register it.
(debug_to_wait): Delete.
* target.h (struct target_ops): Make to_wait, to_pid_to_str and
to_get_thread_local_address accept a pointer to struct target_ops.
(target_wait): Delete macro, and declare as function.
(target_pid_to_str): Likewise.
(target_get_thread_local_address)
(target_get_thread_local_address_p): Delete.
(noprocess): Add NORETURN and ATTR_NORETURN tags.
* inf-ptrace.c (inf_ptrace_wait): Adjust.
(inf_ptrace_pid_to_str): New.
(inf_ptrace_target): Use inf_ptrace_pid_to_str.
* aix-thread.c (aix_thread_wait, aix_thread_pid_to_str): Adjust.
* bsd-kvm.c (bsd_kvm_pid_to_str): Adjust.
* bsd-uthread.c (bsd_uthread_wait, bsd_uthread_pid_to_str):
Adjust.
* corelow.c (core_pid_to_str): Adjust.
* darwin-nat.c (darwin_wait, darwin_pid_to_str): Adjust.
* dec-thread.c (dec_thread_wait, dec_thread_pid_to_str): Adjust.
* gnu-nat.c (gnu_wait, gnu_pid_to_str): Adjust.
* go32-nat.c (go32_wait, go32_pid_to_str): Adjust.
* hpux-thread.c (hpux_thread_wait): Adjust.
* inf-ttrace.c (inf_ttrace_wait, inf_ttrace_pid_to_str): Adjust.
* monitor.c (monitor_wait, monitor_pid_to_str): Adjust.
* nto-procfs.c (procfs_wait, procfs_pid_to_str): Adjust.
* procfs.c (procfs_pid_to_str): Adjust.
* remote-m32r-sdi.c (m32r_wait, m32r_pid_to_str): Adjust.
* remote-mips.c (mips_wait): Adjust.
* remote-sim.c (gdbsim_wait, gdbsim_pid_to_str): Adjust.
* remote.c (remote_wait, remote_pid_to_str)
(remote_get_thread_local_address): Adjust.
* rs6000-nat.c (rs6000_wait): Adjust.
* sol-thread.c (procfs_pid_to_str): Adjust declaration.
(sol_thread_wait, solaris_pid_to_str): Adjust.
* spu-linux-nat.c (spu_child_wait): Adjust.
* windows-nat.c (windows_wait, windows_pid_to_str): Adjust.

gdb/
2009-02-06  Tom Tromey  <tromey@redhat.com>

* Makefile.in (SUBDIR_PYTHON_OBS): Add python-cmd.o.
(SUBDIR_PYTHON_SRCS): Add python-cmd.c.
(python-cmd.o): New target.
* cli/cli-decode.c (set_cmd_completer): Add self parameter to
completer prototype.
(add_cmd): Initialize destroyer member of cmd_list_element. Use
make_symbol_completion_list_fn as completer.
(delete_cmd): Call destroyer if one is set.
* cli/cli-decode.h (cmd_list_element): Add cmd parameter to
completer member.  Add destroyer member.
(set_cmd_completer): Add self parameter to
completer prototype.
* command.h (set_cmd_completer): Add cmd parameter to
completer prototype.
* completer.c (noop_completer, filename_completer,
location_completer, expression_completer, command_completer): Adapt
to new completer prototype.
(complete_line_internal): Pass new parameter to completer function.
* completer.h (noop_completer, filename_completer,
location_completer, expression_completer, command_completer): Adapt
prototypes to new completer prototype.
* interps.c (interpreter_completer): Adapt to new completer
prototype.
* python/python-cmd.c: New file.
* python/python-internal.h (gdbpy_initialize_commands): Add
prototype.
(gdbpy_doc_cst): Add forward declaration.
* python/python.c (gdbpy_doc_cst): Declare.
(_initialize_python): Call gdbpy_initialize_commands.  Initialize
gdbpy_doc_cst.
* symtab.c (make_symbol_completion_list_fn): New function.
* symtab.h (make_symbol_completion_list_fn): Add prototype.

gdb/doc/
2009-02-06  Tom Tromey  <tromey@redhat.com>

* gdb.texinfo (Python API): Add entry for Commands In Python.
(Commands In Python): New node.

gdb/testsuite/
2009-02-06  Thiago Jung Bauermann  <bauerman@br.ibm.com>

* gdb.python/python-cmd.exp: New file.

2009-02-06  Chris Demetriou  <cgd@google.com>

* gold.h (gold_undefined_symbol): Change to take only a Symbol
pointer and to report location as the file name associated with
the symbol.
(gold_undefined_symbol_at_location): New function to replace the
old gold_undefined_symbol functionality.
* target-reloc.h (relocate_section): Update to use
gold_undefined_symbol_at_location.
* symtab.cc (Symbol_table::warn_about_undefined_dynobj_symbol):
Call gold_undefined_symbol function rather than gold_error.
* errors.h (Errors::undefined_symbol): Take location as a
string, rather than calculating it from a relocation.
* errors.cc (Errors::fatal): Print "fatal error:" before the
formatted message.
(Errors::error, Errors::error_at_location): Print "error: "
before the formatted message.
(Errors::undefined_symbol): Take location as a string, rather
than calculating it from a relocation.
(gold_undefined_symbol_at_location): New function akin to
old gold_undefined_symbol, calculates location from relocation.
(gold_undefined_symbol): Change to take only a Symbol pointer
and to report location as the file name associated with the symbol.
* testsuite/debug_msg.sh: Update for changed error messages.
* testsuite/undef_symbol.sh: Likewise.

* lib/ld-lib.exp (check_gc_sections_available): Return 0 for
*-*-mingw*.

* elfxx-mips.c (_bfd_mips_elf_section_processing): Remove special
.sbss handling.

    PR 9814
        * config/tc-arm.c (MODE_RECORDED): New define.
        (output_inst): Record the thumb_mode in the current frag.
        (arm_handle_align): Ignore the MODE_RECORDED bit in tc_frag_data.
        (arm_init_frag): Only set the tc_frag_data field if it has not
        already been set.

* gas/mips/beq.d: Make no assumptions about the symbols used as
        branch targets in the disassembly, or the names of the relocs
        produced.
        * gas/mips/bge.d: Likewise.
        * gas/mips/bgeu.d: Likewise.
        * gas/mips/blt.d: Likewise.
        * gas/mips/bltu.d: Likewise.
        * gas/mips/mips32-sf32.d: Likewise.
        * gas/mips/mips1-fp.d: Likewise.
        * gas/mips/branch-misc-1.d: Skip for the mips-ecoff target.
        * gas/mips/branch-misc-2-64.d: Likewise.
        * gas/mips/branch-misc-2.d: Likewise.
        * gas/mips/branch-misc-2pic-64.d: Likewise.
        * gas/mips/branch-misc-2pic.d: Likewise.
        * gas/mips/branch-swap.d: Likewise.

    * gas/elf/symtab.d: But do not run the test for the Alpha or HPPA
        ports.

Updated Vietnamese translation.

2009-02-06  Tristan Gingold  <gingold@adacore.com>

* gdb.arch/i386-sse.c (main): Replace call to puts by an nop asm.

* target.c (target_get_osdata): Check for equal or higher than
process_stratum, not dummy_stratum.

gas/testsuite/
* gas/ppc/booke.s ("dcbt", "dcbtst"): New tests.
* gas/ppc/booke.d: Likewise.
* gas/ppc/power4_32.s: Likewise.
* gas/ppc/power4_32.d: Likewise.

opcodes/
        * ppc-opc.c: Update copyright year.
        (powerpc_opcodes) <"dcbt", "dcbtst">: Deprecate the Embedded operand
        ordering for POWER4 and later and use the correct Server ordering.

* remote.c (extended_remote_can_run): Delete.
(init_remote_ops): Don't register it.
* target.c (target_get_osdata): Don't check for target_can_run.
Instead any target that has already been pushed, otherwise
fallback to the default run target..

* target.c (target_create_inferior, target_detach)
(target_mourn_inferior, target_attach, target_close): Do target
debug output.
(debug_to_attach, debug_to_detach, debug_to_create_inferior)
(debug_to_mourn_inferior, debug_to_close): Delete.
(setup_target_debug): Adjust.

daily update

*** empty log message ***

* target.h (target_stopped_data_address_p): Delete declaration,
and don't define as macro.
* target.c (target_stopped_data_address_p): Delete.

2009-02-05  Catherine Moore  <clm@codesourcery.com>

* gas/elf/elf.exp: Really run the symtab test.

* ld-arm/arm-elf.exp (armeabitests): Restore thumb2-b-interwork.

* emulparams/m68kelf.sh: Add newline at end of file.

gdb/
2009-02-05  Thiago Jung Bauermann  <bauerman@br.ibm.com>
    Tom Tromey  <tromey@redhat.com>

* python/python-utils.c (target_string_to_unicode): New function.
* python/python-internal.h (target_string_to_unicode): New prototype.
* python/python-value.c (valpy_string): New function.
(value_object_methods): Add `string' entry.

gdb/doc/
2009-02-05  Tom Tromey  <tromey@redhat.com>

* gdb.texinfo (Values From Inferior): Document Value.string.

* target.h (target_tid_to_str): Delete.
* thread.c (print_thread_info, thread_apply_all_command)
(thread_apply_command, thread_command, do_captured_thread_select):
Use target_pid_to_str instead of target_tid_to_str.
* linux-fork.c (delete_fork_command): Likewise.

* frame.c (has_stack_frames): Make public.
(get_prev_frame): Don't allow a NULL this_frame anymore.
* frame.h (has_stack_frames): Declare.
* varobj.c (find_frame_addr_in_frame_chain): Don't ever pass NULL
to get_prev_frame, instead start at get_current_frame.
(varobj_create): Check has_stack_frames before getting any frame;
eliminate one usage of deprecated_safe_get_selected_frame.

gdb/
2009-02-05  Tom Tromey  <tromey@redhat.com>
    Thiago Jung Bauermann  <bauerman@br.ibm.com>

* python/python.c (GdbMethods): Move to bottom of file.
(get_parameter, execute_gdb_command, gdbpy_write,
gdbpy_flush): Remove forward declarations.
(eval_python_from_control_command): Fix error checking of function
PyRun_SimpleString.  Fix error string.
(python_command): Likewise.
(execute_gdb_command): Added from_tty argument.

gdb/doc/
2009-02-05  Tom Tromey  <tromey@redhat.com>

* gdb.texinfo (Basic Python): Document execute's from_tty
argument.

* Makefile.tpl (stage_last): Define $r and $s before using
$(RECURSE_FLAGS_TO_PASS).
* Makefile.in: Regenerate

2009-02-05  Tristan Gingold  <gingold@adacore.com>

* gdb.base/sigbpt.exp: Detect which signal is received when a NULL
pointer is dereferenced and use this signal name in regexp.
* gdb.base/signull.exp: Ditto.
* gdb.base/sigbpt.c (main): Catch SIGBUS too.
* gdb.base/signull.c (main): Ditto.

2009-02-05  Thiago Jung Bauermann  <bauerman@br.ibm.com>

* language.h (language_dfn): Add la_get_string member.
(LA_GET_STRING): New macro.
(default_get_string): New prototype.
* language.c (default_get_string): New function.
(unknown_language_defn, auto_language_defn, local_language_defn): Use
default_get_string for la_get_string.
* c-lang.c (c_get_string): New function.
(c_language_defn, cplus_language_defn, asm_language_defn): Use
c_get_string for la_get_string.
(minimal_language_defn): Likewise
* ada-lang.c (ada_language_defn): Likewise.
* f-lang.c (f_language_defn): Use default_get_string for
la_get_string.
* jv-lang.c (java_language_defn): Likewise.
* m2-lang.c (m2_language_defn): Likewise.
* objc-lang.c (objc_language_defn): Likewise.
* p-lang.c (p_language_defn): Likewise.
* scm-lang.c (scm_language_defn): Likewise.
* typeprint.c (type_to_string): New function.
* value.h (type_to_string): New prototype.
* valprint.c (val_print_string): Factor out code for reading string
from the inferior into its own function.  Put 2 spaces after period
in comments.
(read_string): New function.
* valprint.h (read_string): New prototype.

2009-01-07  Pierre Muller  <muller@ics.u-strasbg.fr>
    Tom Tromey  <tromey@redhat.com>

PR breakpoints/8079:
* breakpoint.c (print_one_breakpoint): Use exp_string field
to display expression of watchpoints.
(mention): Likewise.
(watch_command_1): Remove trailing whitespace from expression.
* printcmd.c (struct display) <exp_string>: New field.
(display_command): Set exp_string.
(free_display): Free exp_string.
(clear_displays): Use free_display.
(do_one_display): Print exp_string.
(display_info): Likewise.

*** empty log message ***

daily update

gdb/
2009-02-04  Tom Tromey  <tromey@redhat.com>
    Thiago Jung Bauermann  <bauerman@br.ibm.com>
    Phil Muldoon  <pmuldoon@redhat.com>

* python/python-internal.h (gdbpy_get_value_from_history): Rename
prototype to gdbpy_history.
(gdbpy_is_string): Declare.
(python_string_to_host_string): Declare.
* python/python-utils.c (gdbpy_is_string): New function.
(unicode_to_encoded_string): New function.
(unicode_to_target_string): Use it.
(python_string_to_host_string): New function.
* python/python-value.c (valpy_address): New function.
(convert_value_from_python): Use gdbpy_is_string.  Change to throw
Python exception instead of a GDB exception on error.  Properly check
Python booleans.
(valpy_getitem): Convert field name to host string.  Handle array
accesses.  Adapt to new behaviour of convert_value_from_python.
(valpy_new): Adapt to new behaviour of convert_value_from_python.
(enum valpy_opcode) <VALPY_LSH, VALPY_RSH, VALPY_BITAND,
VALPY_BITXOR, VALPY_BITOR>: New constants.
(valpy_binop): Update.  Adapt to new behaviour of
convert_value_from_python.
(valpy_invert): New function.
(valpy_lsh): Likewise.
(valpy_rsh): Likewise.
(valpy_and): Likewise.
(valpy_or): Likewise.
(valpy_xor): Likewise.
(valpy_richcompare): Call convert_value_from_python instead of doing
conversions itself.
(is_intlike, valpy_int, valpy_long, valpy_float): New functions.
(gdbpy_get_value_from_history): Rename
function to gdbpy_history.
(gdbpy_initialize_values): Don't set tp_new.
(value_object_type): Add valpy_new.
(value_object_methods): Add `address' entry.
(value_object_as_number): Update for new methods.
* python/python.c (GdbMethods): Rename entry from
`get_value_from_history' to `history'.

gdb/doc/
2009-02-04  Tom Tromey  <tromey@redhat.com>

* gdb.texinfo (Basic Python): Document gdb.history.

gdb/testsuite/
2009-02-04  Tom Tromey  <tromey@redhat.com>
    Thiago Jung Bauermann  <bauerman@br.ibm.com>

* gdb.python/python-value.exp: Use `gdb.history' instead of
`gdb.value_from_history'.
(test_value_numeric_ops): Add test for conversion of enum constant.
* gdb.python/python-value.c (enum e): New type.
(evalue): New global.
(main): Use argv.

* gdb.ada/uninitialized_vars: New test program.
* gdb.ada/uninitialized_vars.exp: New testcase.

Fix a type in the last entry.

* ada-lang.c (ada_template_to_fixed_record_type_1): Check size
of type to guard against a crash.

Fix my ChangeLog entry date.

gas/

2009-02-04  H.J. Lu  <hongjiu.lu@intel.com>

AVX Programming Reference (January, 2009)
* config/tc-i386.c (CPU_FLAGS_PCLMUL_MATCH): New.
(CPU_FLAGS_AVX_MATCH): Updated.
(CPU_FLAGS_32BIT_MATCH): Likewise.
(cpu_flags_match): Likewise.

gas/testsuite/

2009-02-04  H.J. Lu  <hongjiu.lu@intel.com>

AVX Programming Reference (January, 2009)
* gas/i386/arch-avx-1-3.l: New.
* gas/i386/arch-avx-1-3.s: Likewise.
* gas/i386/arch-avx-1-4.l: Likewise.
* gas/i386/arch-avx-1-4.s: Likewise.
* gas/i386/arch-avx-1-5.l: Likewise.
* gas/i386/arch-avx-1-5.s: Likewise.
* gas/i386/arch-avx-1-6.l: Likewise.
* gas/i386/arch-avx-1-6.s: Likewise.

* gas/i386/arch-10.s: Add vpclmul instructions.
* gas/i386/arch-avx-1.s: Likewise.
* gas/i386/avx.s: Likewise.
* gas/i386/x86-64-arch-2.s: Likewise.
* gas/i386/x86-64-avx.s: Likewise.

* gas/i386/sse2avx.s: Add pclmul instructions.
* gas/i386/x86-64-sse2avx.s: Likewise.

* gas/i386/arch-10.d: Updated.
* gas/i386/arch-10-1.l: Likewise.
* gas/i386/arch-10-2.l: Likewise.
* gas/i386/arch-10-3.l: Likewise.
* gas/i386/arch-10-4.l: Likewise.
* gas/i386/arch-avx-1.d: Likewise.
* gas/i386/arch-avx-1-1.l: Likewise.
* gas/i386/arch-avx-1-2.l: Likewise.
* gas/i386/avx.d: Likewise.
* gas/i386/avx-intel.d: Likewise.
* gas/i386/sse2avx.d: Likewise.
* gas/i386/x86-64-arch-2.d: Likewise.
* gas/i386/x86-64-avx.d: Likewise.
* gas/i386/x86-64-avx-intel.d: Likewise.
* gas/i386/x86-64-sse2avx.d: Likewise.

* gas/i386/i386.exp: Run arch-avx-1-3, arch-avx-1-4,
arch-avx-1-5 and arch-avx-1-6.

opcodes/

2009-02-04  H.J. Lu  <hongjiu.lu@intel.com>

AVX Programming Reference (January, 2009)
* i386-dis.c (PREFIX_VEX_3A44): New.
(VEX_LEN_3A44_P_2): Likewise.
(PREFIX_VEX_3A48): Updated.
(VEX_LEN_3A4C_P_2): Likewise.
(prefix_table): Add PREFIX_VEX_3A44.
(vex_table): Likewise.
(vex_len_table): Add VEX_LEN_3A44_P_2.

* i386-opc.tbl: Add PCLMUL + AVX instructions.
* i386-tbl.h: Regenerated.

* value.c (value_from_contents_and_address): Always return
a lval_memory value, even if address is null.

PR 9812
* reduced_debug_output.h
(Output_reduced_debug_abbrev_section::failed): Use format for
gold_warning.
(Output_reduced_debug_info_section::faild): Likewise.

2008-12-05  Tristan Gingold  <gingold@adacore.com>

* i386-darwin-tdep.c (darwin_sigtramp_p): New function.
(i386_darwin_sigcontext_addr): Ditto.
(amd64_darwin_sigcontext_addr): Ditto.
(darwin_dwarf_signal_frame_p): Ditto.
(i386_darwin_init_abi): Handle signal frames, use the const for
sc_num_regs.
(x86_darwin_init_abi_64): Ditto.