x86/sev-es: Allow copy_from_kernel_nofault() in earlier boot

[ Upstream commit f79936545fb122856bd78b189d3c7ee59928c751 ]

Previously, if copy_from_kernel_nofault() was called before
boot_cpu_data.x86_virt_bits was set up, then it would trigger undefined
behavior due to a shift by 64.

This ended up causing boot failures in the latest version of ubuntu2204
in the gcp project when using SEV-SNP.

Specifically, this function is called during an early #VC handler which
is triggered by a CPUID to check if NX is implemented.

Fixes: 1aa9aa8ee517 ("x86/sev-es: Setup GHCB-based boot #VC handler")
Suggested-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Adam Dunlap <acdunlap@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Jacob Xu <jacobhxu@google.com>
Link: https://lore.kernel.org/r/20230912002703.3924521-2-acdunlap@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

cgroup/cpuset: Fix load balance state in update_partition_sd_lb()

[ Upstream commit 6fcdb0183bf024a70abccb0439321c25891c708d ]

Commit a86ce68078b2 ("cgroup/cpuset: Extract out CS_CPU_EXCLUSIVE
& CS_SCHED_LOAD_BALANCE handling") adds a new helper function
update_partition_sd_lb() to update the load balance state of the
cpuset. However the new load balance is determined by just looking at
whether the cpuset is a valid isolated partition root or not.  That is
not enough if the cpuset is not a valid partition root but its parent
is in the isolated state (load balance off). Update the function to
set the new state to be the same as its parent in this case like what
has been done in commit c8c926200c55 ("cgroup/cpuset: Inherit parent's
load balance state in v2").

Fixes: a86ce68078b2 ("cgroup/cpuset: Extract out CS_CPU_EXCLUSIVE & CS_SCHED_LOAD_BALANCE handling")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI/NUMA: Apply SRAT proximity domain to entire CFMWS window

[ Upstream commit 8f1004679987302b155f14b966ca6d4335814fcb ]

Commit fd49f99c1809 ("ACPI: NUMA: Add a node and memblk for each
CFMWS not in SRAT") did not account for the case where the BIOS
only partially describes a CFMWS Window in the SRAT. That means
the omitted address ranges, of a partially described CFMWS Window,
do not get assigned to a NUMA node.

Replace the call to phys_to_target_node() with numa_add_memblks().
Numa_add_memblks() searches an HPA range for existing memblk(s)
and extends those memblk(s) to fill the entire CFMWS Window.

Extending the existing memblks is a simple strategy that reuses
SRAT defined proximity domains from part of a window to fill out
the entire window, based on the knowledge* that all of a CFMWS
window is of a similar performance class.

*Note that this heuristic will evolve when CFMWS Windows present
a wider range of characteristics. The extension of the proximity
domain, implemented here, is likely a step in developing a more
sophisticated performance profile in the future.

There is no change in behavior when the SRAT does not describe
the CFMWS Window at all. In that case, a new NUMA node with a
single memblk covering the entire CFMWS Window is created.

Fixes: fd49f99c1809 ("ACPI: NUMA: Add a node and memblk for each CFMWS not in SRAT")
Reported-by: Derick Marks <derick.w.marks@intel.com>
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Derick Marks <derick.w.marks@intel.com>
Link: https://lore.kernel.org/all/eaa0b7cffb0951a126223eef3cbe7b55b8300ad9.1689018477.git.alison.schofield%40intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/numa: Introduce numa_fill_memblks()

[ Upstream commit 8f012db27c9516be1a7aca93ea4a6ca9c75056c9 ]

numa_fill_memblks() fills in the gaps in numa_meminfo memblks
over an physical address range.

The ACPI driver will use numa_fill_memblks() to implement a new Linux
policy that prescribes extending proximity domains in a portion of a
CFMWS window to the entire window.

Dan Williams offered this explanation of the policy:
A CFWMS is an ACPI data structure that indicates *potential* locations
where CXL memory can be placed. It is the playground where the CXL
driver has free reign to establish regions. That space can be populated
by BIOS created regions, or driver created regions, after hotplug or
other reconfiguration.

When BIOS creates a region in a CXL Window it additionally describes
that subset of the Window range in the other typical ACPI tables SRAT,
SLIT, and HMAT. The rationale for BIOS not pre-describing the entire
CXL Window in SRAT, SLIT, and HMAT is that it can not predict the
future. I.e. there is nothing stopping higher or lower performance
devices being placed in the same Window. Compare that to ACPI memory
hotplug that just onlines additional capacity in the proximity domain
with little freedom for dynamic performance differentiation.

That leaves the OS with a choice, should unpopulated window capacity
match the proximity domain of an existing region, or should it allocate
a new one? This patch takes the simple position of minimizing proximity
domain proliferation by reusing any proximity domain intersection for
the entire Window. If the Window has no intersections then allocate a
new proximity domain. Note that SRAT, SLIT and HMAT information can be
enumerated dynamically in a standard way from device provided data.
Think of CXL as the end of ACPI needing to describe memory attributes,
CXL offers a standard discovery model for performance attributes, but
Linux still needs to interoperate with the old regime.

Reported-by: Derick Marks <derick.w.marks@intel.com>
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Derick Marks <derick.w.marks@intel.com>
Link: https://lore.kernel.org/all/ef078a6f056ca974e5af85997013c0fda9e3326d.1689018477.git.alison.schofield%40intel.com
Stable-dep-of: 8f1004679987 ("ACPI/NUMA: Apply SRAT proximity domain to entire CFMWS window")
Signed-off-by: Sasha Levin <sashal@kernel.org>

futex: Don't include process MM in futex key on no-MMU

[ Upstream commit c73801ae4f22b390228ebf471d55668e824198b6 ]

On no-MMU, all futexes are treated as private because there is no need
to map a virtual address to physical to match the futex across
processes. This doesn't quite work though, because private futexes
include the current process's mm_struct as part of their key. This makes
it impossible for one process to wake up a shared futex being waited on
in another process.

Fix this bug by excluding the mm_struct from the key. With
a single address space, the futex address is already a unique key.

Fixes: 784bdf3bb694 ("futex: Assume all mappings are private on !MMU systems")
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20231019204548.1236437-2-ben.wolsieffer@hefring.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/srso: Fix unret validation dependencies

[ Upstream commit eeb9f34df065f42f0c9195b322ba6df420c9fc92 ]

CONFIG_CPU_SRSO isn't dependent on CONFIG_CPU_UNRET_ENTRY (AMD
Retbleed), so the two features are independently configurable.  Fix
several issues for the (presumably rare) case where CONFIG_CPU_SRSO is
enabled but CONFIG_CPU_UNRET_ENTRY isn't.

Fixes: fb3bd914b3ec ("x86/srso: Add a Speculative RAS Overflow mitigation")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/299fb7740174d0f2335e91c58af0e9c242b4bac1.1693889988.git.jpoimboe@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/srso: Fix vulnerability reporting for missing microcode

[ Upstream commit dc6306ad5b0dda040baf1fde3cfd458e6abfc4da ]

The SRSO default safe-ret mitigation is reported as "mitigated" even if
microcode hasn't been updated.  That's wrong because userspace may still
be vulnerable to SRSO attacks due to IBPB not flushing branch type
predictions.

Report the safe-ret + !microcode case as vulnerable.

Also report the microcode-only case as vulnerable as it leaves the
kernel open to attacks.

Fixes: fb3bd914b3ec ("x86/srso: Add a Speculative RAS Overflow mitigation")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/a8a14f97d1b0e03ec255c81637afdf4cf0ae9c99.1693889988.git.jpoimboe@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/srso: Print mitigation for retbleed IBPB case

[ Upstream commit de9f5f7b06a5b7adbfdd8016f011120a4e928add ]

When overriding the requested mitigation with IBPB due to retbleed=ibpb,
print the mitigation in the usual format instead of a custom error
message.

Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/ec3af919e267773d896c240faf30bfc6a1fd6304.1693889988.git.jpoimboe@kernel.org
Stable-dep-of: dc6306ad5b0d ("x86/srso: Fix vulnerability reporting for missing microcode")
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/srso: Fix SBPB enablement for (possible) future fixed HW

[ Upstream commit 1d1142ac51307145dbb256ac3535a1d43a1c9800 ]

Make the SBPB check more robust against the (possible) case where future
HW has SRSO fixed but doesn't have the SRSO_NO bit set.

Fixes: 1b5277c0ea0b ("x86/srso: Add SRSO_NO support")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/cee5050db750b391c9f35f5334f8ff40e66c01b9.1693889988.git.jpoimboe@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

writeback, cgroup: switch inodes with dirty timestamps to release dying cgwbs

[ Upstream commit 6654408a33e6297d8e1d2773409431d487399b95 ]

The cgwb cleanup routine will try to release the dying cgwb by switching
the attached inodes.  It fetches the attached inodes from wb->b_attached
list, omitting the fact that inodes only with dirty timestamps reside in
wb->b_dirty_time list, which is the case when lazytime is enabled.  This
causes enormous zombie memory cgroup when lazytime is enabled, as inodes
with dirty timestamps can not be switched to a live cgwb for a long time.

It is reasonable not to switch cgwb for inodes with dirty data, as
otherwise it may break the bandwidth restrictions.  However since the
writeback of inode metadata is not accounted for, let's also switch
inodes with dirty timestamps to avoid zombie memory and block cgroups
when laztytime is enabled.

Fixes: c22d70a162d3 ("writeback, cgroup: release dying cgwbs by switching attached inodes")
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20231014125511.102978-1-jefflexu@linux.alibaba.com
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vfs: fix readahead(2) on block devices

[ Upstream commit 7116c0af4b8414b2f19fdb366eea213cbd9d91c2 ]

Readahead was factored to call generic_fadvise.  That refactor added an
S_ISREG restriction which broke readahead on block devices.

In addition to S_ISREG, this change checks S_ISBLK to fix block device
readahead.  There is no change in behavior with any file type besides block
devices in this change.

Fixes: 3d8f7615319b ("vfs: implement readahead(2) using POSIX_FADV_WILLNEED")
Signed-off-by: Reuben Hawkins <reubenhwk@gmail.com>
Link: https://lore.kernel.org/r/20231003015704.2415-1-reubenhwk@gmail.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfsd: Handle EOPENSTALE correctly in the filecache

[ Upstream commit d59b3515ab021e010fdc58a8f445ea62dd2f7f4c ]

The nfsd_open code handles EOPENSTALE correctly, by retrying the call to
fh_verify() and __nfsd_open(). However the filecache just drops the
error on the floor, and immediately returns nfserr_stale to the caller.

This patch ensures that we propagate the EOPENSTALE code back to
nfsd_file_do_acquire, and that we handle it correctly.

Fixes: 65294c1f2c5e ("nfsd: add a new struct file caching facility to nfsd")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Message-Id: <20230911183027.11372-1-trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched: Fix stop_one_cpu_nowait() vs hotplug

[ Upstream commit f0498d2a54e7966ce23cd7c7ff42c64fa0059b07 ]

Kuyo reported sporadic failures on a sched_setaffinity() vs CPU
hotplug stress-test -- notably affine_move_task() remains stuck in
wait_for_completion(), leading to a hung-task detector warning.

Specifically, it was reported that stop_one_cpu_nowait(.fn =
migration_cpu_stop) returns false -- this stopper is responsible for
the matching complete().

The race scenario is:

CPU0 CPU1

// doing _cpu_down()

  __set_cpus_allowed_ptr()
    task_rq_lock();
takedown_cpu()
  stop_machine_cpuslocked(take_cpu_down..)

<PREEMPT: cpu_stopper_thread()
  MULTI_STOP_PREPARE
  ...
    __set_cpus_allowed_ptr_locked()
      affine_move_task()
        task_rq_unlock();

  <PREEMPT: cpu_stopper_thread()\>
    ack_state()
  MULTI_STOP_RUN
    take_cpu_down()
      __cpu_disable();
      stop_machine_park();
stopper->enabled = false;
 />
   />
stop_one_cpu_nowait(.fn = migration_cpu_stop);
          if (stopper->enabled) // false!!!

That is, by doing stop_one_cpu_nowait() after dropping rq-lock, the
stopper thread gets a chance to preempt and allows the cpu-down for
the target CPU to complete.

OTOH, since stop_one_cpu_nowait() / cpu_stop_queue_work() needs to
issue a wakeup, it must not be ran under the scheduler locks.

Solve this apparent contradiction by keeping preemption disabled over
the unlock + queue_stopper combination:

preempt_disable();
task_rq_unlock(...);
if (!stop_pending)
  stop_one_cpu_nowait(...)
preempt_enable();

This respects the lock ordering contraints while still avoiding the
above race. That is, if we find the CPU is online under rq-lock, the
targeted stop_one_cpu_nowait() must succeed.

Apply this pattern to all similar stop_one_cpu_nowait() invocations.

Fixes: 6d337eab041d ("sched: Fix migrate_disable() vs set_cpus_allowed_ptr()")
Reported-by: "Kuyo Chang (張建文)" <Kuyo.Chang@mediatek.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: "Kuyo Chang (張建文)" <Kuyo.Chang@mediatek.com>
Link: https://lkml.kernel.org/r/20231010200442.GA16515@noisy.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>

objtool: Propagate early errors

[ Upstream commit e959c279d391c10b35ce300fb4b0fe3b98e86bd2 ]

If objtool runs into a problem that causes it to exit early, the overall
tool still returns a status code of 0, which causes the build to
continue as if nothing went wrong.

Note this only affects early errors, as later errors are still ignored
by check().

Fixes: b51277eb9775 ("objtool: Ditch subcommands")
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Link: https://lore.kernel.org/r/cb6a28832d24b2ebfafd26da9abb95f874c83045.1696355111.git.aplattner@nvidia.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/uclamp: Ignore (util == 0) optimization in feec() when p_util_max = 0

[ Upstream commit 23c9519def98ee0fa97ea5871535e9b136f522fc ]

find_energy_efficient_cpu() bails out early if effective util of the
task is 0 as the delta at this point will be zero and there's nothing
for EAS to do. When uclamp is being used, this could lead to wrong
decisions when uclamp_max is set to 0. In this case the task is capped
to performance point 0, but it is actually running and consuming energy
and we can benefit from EAS energy calculations.

Rework the condition so that it bails out when both util and uclamp_min
are 0.

We can do that without needing to use uclamp_task_util(); remove it.

Fixes: d81304bc6193 ("sched/uclamp: Cater for uclamp in find_energy_efficient_cpu()'s early exit condition")
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230916232955.2099394-3-qyousef@layalina.io
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/uclamp: Set max_spare_cap_cpu even if max_spare_cap is 0

[ Upstream commit 6b00a40147653c8ea748e8f4396510f252763364 ]

When uclamp_max is being used, the util of the task could be higher than
the spare capacity of the CPU, but due to uclamp_max value we force-fit
it there.

The way the condition for checking for max_spare_cap in
find_energy_efficient_cpu() was constructed; it ignored any CPU that has
its spare_cap less than or _equal_ to max_spare_cap. Since we initialize
max_spare_cap to 0; this lead to never setting max_spare_cap_cpu and
hence ending up never performing compute_energy() for this cluster and
missing an opportunity for a better energy efficient placement to honour
uclamp_max setting.

max_spare_cap = 0;
cpu_cap = capacity_of(cpu) - cpu_util(p);  // 0 if cpu_util(p) is high

...

util_fits_cpu(...); // will return true if uclamp_max forces it to fit

...

// this logic will fail to update max_spare_cap_cpu if cpu_cap is 0
if (cpu_cap > max_spare_cap) {
max_spare_cap = cpu_cap;
max_spare_cap_cpu = cpu;
}

prev_spare_cap suffers from a similar problem.

Fix the logic by converting the variables into long and treating -1
value as 'not populated' instead of 0 which is a viable and correct
spare capacity value. We need to be careful signed comparison is used
when comparing with cpu_cap in one of the conditions.

Fixes: 1d42509e475c ("sched/fair: Make EAS wakeup placement consider uclamp restrictions")
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230916232955.2099394-2-qyousef@layalina.io
Signed-off-by: Sasha Levin <sashal@kernel.org>

iov_iter, x86: Be consistent about the __user tag on copy_mc_to_user()

[ Upstream commit 066baf92bed934c9fb4bcee97a193f47aa63431c ]

copy_mc_to_user() has the destination marked __user on powerpc, but not on
x86; the latter results in a sparse warning in lib/iov_iter.c.

Fix this by applying the tag on x86 too.

Fixes: ec6347bb4339 ("x86, powerpc: Rename memcpy_mcsafe() to copy_mc_to_{user, kernel}()")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20230925120309.1731676-3-dhowells@redhat.com
cc: Dan Williams <dan.j.williams@intel.com>
cc: Thomas Gleixner <tglx@linutronix.de>
cc: Ingo Molnar <mingo@redhat.com>
cc: Borislav Petkov <bp@alien8.de>
cc: Dave Hansen <dave.hansen@linux.intel.com>
cc: "H. Peter Anvin" <hpa@zytor.com>
cc: Alexander Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: Christoph Hellwig <hch@lst.de>
cc: Christian Brauner <christian@brauner.io>
cc: Matthew Wilcox <willy@infradead.org>
cc: Linus Torvalds <torvalds@linux-foundation.org>
cc: David Laight <David.Laight@ACULAB.COM>
cc: x86@kernel.org
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/fair: Fix cfs_rq_is_decayed() on !SMP

[ Upstream commit c0490bc9bb62d9376f3dd4ec28e03ca0fef97152 ]

We don't need to maintain per-queue leaf_cfs_rq_list on !SMP, since
it's used for cfs_rq load tracking & balancing on SMP.

But sched debug interface uses it to print per-cfs_rq stats.

This patch fixes the !SMP version of cfs_rq_is_decayed(), so the
per-queue leaf_cfs_rq_list is also maintained correctly on !SMP,
to fix the warning in assert_list_leaf_cfs_rq().

Fixes: 0a00a354644e ("sched/fair: Delete useless condition in tg_unthrottle_up()")
Reported-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Closes: https://lore.kernel.org/all/ZN87UsqkWcFLDxea@swlinux02/
Link: https://lore.kernel.org/r/20230913132031.2242151-1-chengming.zhou@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/topology: Fix sched_numa_find_nth_cpu() in non-NUMA case

[ Upstream commit 8ab63d418d4339d996f80d02a00dbce0aa3ff972 ]

When CONFIG_NUMA is enabled, sched_numa_find_nth_cpu() searches for a
CPU in sched_domains_numa_masks. The masks includes only online CPUs,
so effectively offline CPUs are skipped.

When CONFIG_NUMA is disabled, the fallback function should be consistent.

Fixes: cd7f55359c90 ("sched: add sched_numa_find_nth_cpu()")
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Link: https://lore.kernel.org/r/20230819141239.287290-5-yury.norov@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/topology: Fix sched_numa_find_nth_cpu() in CPU-less case

[ Upstream commit 617f2c38cb5ce60226042081c09e2ee3a90d03f8 ]

When the node provided by user is CPU-less, corresponding record in
sched_domains_numa_masks is not set. Trying to dereference it in the
following code leads to kernel crash.

To avoid it, start searching from the nearest node with CPUs.

Fixes: cd7f55359c90 ("sched: add sched_numa_find_nth_cpu()")
Reported-by: Yicong Yang <yangyicong@hisilicon.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Cc: Mel Gorman <mgorman@suse.de>
Link: https://lore.kernel.org/r/20230819141239.287290-4-yury.norov@gmail.com
Closes: https://lore.kernel.org/lkml/CAAH8bW8C5humYnfpW3y5ypwx0E-09A3QxFE1JFzR66v+mO4XfA@mail.gmail.com/T/
Closes: https://lore.kernel.org/lkml/ZMHSNQfv39HN068m@yury-ThinkPad/T/#mf6431cb0b7f6f05193c41adeee444bc95bf2b1c4
Signed-off-by: Sasha Levin <sashal@kernel.org>

numa: Generalize numa_map_to_online_node()

[ Upstream commit b1f099b1cf51d553c510c6c8141c27d9ba7ea1fe ]

The function in fact searches the nearest node for a given one,
based on a N_ONLINE state. This is a common pattern to search
for a nearest node.

This patch converts numa_map_to_online_node() to numa_nearest_node()
so that others won't need to opencode the logic.

Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Link: https://lore.kernel.org/r/20230819141239.287290-2-yury.norov@gmail.com
Stable-dep-of: 617f2c38cb5c ("sched/topology: Fix sched_numa_find_nth_cpu() in CPU-less case")
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (nct6775) Fix incorrect variable reuse in fan_div calculation

commit 920057ad521dc8669e534736c2a12c14ec9fb2d7 upstream.

In the regmap conversion in commit 4ef2774511dc ("hwmon: (nct6775)
Convert register access to regmap API") I reused the 'reg' variable
for all three register reads in the fan speed calculation loop in
nct6775_update_device(), but failed to notice that the value from the
first one (data->REG_FAN[i]) is actually used in the call to
nct6775_select_fan_div() at the end of the loop body.  Since that
patch the register value passed to nct6775_select_fan_div() has been
(conditionally) incorrectly clobbered with the value of a different
register than intended, which has in at least some cases resulted in
fan speeds being adjusted down to zero.

Fix this by using dedicated temporaries for the two intermediate
register reads instead of 'reg'.

Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Fixes: 4ef2774511dc ("hwmon: (nct6775) Convert register access to regmap API")
Reported-by: Thomas Zajic <zlatko@gmx.at>
Tested-by: Thomas Zajic <zlatko@gmx.at>
Cc: stable@vger.kernel.org # v5.19+
Link: https://lore.kernel.org/r/20230929200822.964-2-zev@bewilderbeest.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 6.6.1

Link: https://lore.kernel.org/r/20231106130257.903265688@linuxfoundation.org
Tested-by: Ronald Warsow <rwarsow@gmx.de>
Tested-by: SeongJae Park <sj@kernel.org>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Allen Pais <apais@linux.microsoft.com>
Tested-by: Rudi Heitbaum <rudi@heitbaum.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Ricardo B. Marliere <ricardo@marliere.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: SOF: sof-pci-dev: Fix community key quirk detection

commit 7dd692217b861a8292ff8ac2c9d4458538fd6b96 upstream.

Some Chromebooks do not populate the product family DMI value resulting
in firmware load failures.

Add another quirk detection entry that looks for "Google" in the BIOS
version. Theoretically, PRODUCT_FAMILY could be replaced with
BIOS_VERSION, but it is left as a quirk to be conservative.

Cc: stable@vger.kernel.org
Signed-off-by: Mark Hasemeyer <markhas@chromium.org>
Acked-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20231020145953.v1.1.Iaf5702dc3f8af0fd2f81a22ba2da1a5e15b3604c@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda: intel-dsp-config: Fix JSL Chromebook quirk detection

commit 7c05b44e1a50d9cbfc4f731dddc436a24ddc129a upstream.

Some Jasperlake Chromebooks overwrite the system vendor DMI value to the
name of the OEM that manufactured the device. This breaks Chromebook
quirk detection as it expects the system vendor to be "Google".

Add another quirk detection entry that looks for "Google" in the BIOS
version.

Cc: stable@vger.kernel.org
Signed-off-by: Mark Hasemeyer <markhas@chromium.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231018235944.1860717-1-markhas@chromium.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: core: Fix runtime PM handling for pending tx

commit 6f699743aebf07538e506a46c5965eb8bdd2c716 upstream.

Richard reported that a serial port may end up sometimes with tx data
pending in the buffer for long periods of time.

Turns out we bail out early on any errors from pm_runtime_get(),
including -EINPROGRESS. To fix the issue, we need to ignore -EINPROGRESS
as we only care about the runtime PM usage count at this point. We check
for an active runtime PM state later on for tx.

Fixes: 84a9582fd203 ("serial: core: Start managing serial controllers to enable runtime PM")
Cc: stable <stable@kernel.org>
Reported-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Bruce Ashfield <bruce.ashfield@gmail.com>
Cc: Mikko Rapeli <mikko.rapeli@linaro.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Randy MacLeod <randy.macleod@windriver.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tested-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Link: https://lore.kernel.org/r/20231023074856.61896-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: pci_endpoint_test: Add deviceID for J721S2 PCIe EP device support

commit 8293703a492ae97c86af27c75b76e6239ec86483 upstream.

Add DEVICE_ID for J721S2 and enable support for endpoints configured
with this DEVICE_ID in the pci_endpoint_test driver.

Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Cc: stable <stable@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231020120248.3168406-1-s-vadapalli@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: serial: rs485: Add rs485-rts-active-high

commit 0c01b20fb50ba63c03841aa83070dc59c3b1b02f upstream.

Add rs485-rts-active-high property, this is a legacy property
used by 8250_omap.

This fixes the following make dt_binding_check warning:

Documentation/devicetree/bindings/serial/8250_omap.yaml:
rs485-rts-active-high: missing type definition

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/all/CAMuHMdUkPiA=o_QLyuwsTYW7y1ksCjHAqyNSHFx2QZ-dP-HGsQ@mail.gmail.com/
Fixes: 403e97d6ab2c ("dt-bindings: serial: 8250_omap: add rs485-rts-active-high")
Cc: stable <stable@kernel.org>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231019154834.41721-1-francesco@dolcini.it
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks

commit e4876dacaca46a1b09f9b417480924ab12019a5b upstream.

Some of the later revisions of the Brainboxes PX cards are based
on the Oxford Semiconductor chipset. Due to the chip's unique setup
these cards need to be initialised.
Previously these were tested against a reference card with the same broken
baudrate on another PC, cancelling out the effect. With this patch they
work and can transfer/receive find against an FTDI-based device.

Add all of the cards which require this setup to the quirks table.
Thanks to Maciej W. Rozycki for clarification on this chip.

Fixes: ef5a03a26c87 ("tty: 8250: Add support for Brainboxes PX cards.")
Cc: stable@vger.kernel.org
Signed-off-by: Cameron Williams <cang1@live.co.uk>
Link: https://lore.kernel.org/r/DU0PR02MB7899D222A4AB2A4E8C57108FC4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: 8250: Add support for Intashield IX cards

commit 62d2ec2ded278c7512d91ca7bf8eb9bac46baf90 upstream.

Add support for the IX-100, IX-200 and IX-400 serial cards.

Cc: stable@vger.kernel.org
Signed-off-by: Cameron Williams <cang1@live.co.uk>
Link: https://lore.kernel.org/r/DU0PR02MB7899614E5837E82A03272A4BC4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: 8250: Add support for additional Brainboxes PX cards

commit 9604884e592cd04ead024c9737c67a77f175cab9 upstream.

Add support for some more of the Brainboxes PX (PCIe) range
of serial cards, namely
PX-275/PX-279, PX-475 (serial port, not LPT), PX-820,
PX-803/PX-857 (additional ID).

Cc: stable@vger.kernel.org
Signed-off-by: Cameron Williams <cang1@live.co.uk>
Link: https://lore.kernel.org/r/DU0PR02MB78996BEC353FB346FC35444BC4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: 8250: Fix up PX-803/PX-857

commit ee61337b934c99c2611e0a945d592019b2e00c82 upstream.

The PX-803/PX-857 are variants of each other, add a note.
Additionally fix up the port counts for the card (2, not 1).

Fixes: ef5a03a26c87 ("tty: 8250: Add support for Brainboxes PX cards.")
Cc: stable@vger.kernel.org
Signed-off-by: Cameron Williams <cang1@live.co.uk>
Link: https://lore.kernel.org/r/DU0PR02MB789978C8ED872FB4B014E132C4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: 8250: Fix port count of PX-257

commit d0ff5b24c2f112f29dea4c38b3bac9597b1be9ba upstream.

The port count of the PX-257 Rev3 is actually 2, not 4.

Fixes: ef5a03a26c87 ("tty: 8250: Add support for Brainboxes PX cards.")
Cc: stable@vger.kernel.org
Signed-off-by: Cameron Williams <cang1@live.co.uk>
Link: https://lore.kernel.org/r/DU0PR02MB7899C804D9F04E727B5A0E8FC4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: 8250: Add support for Intashield IS-100

commit 4d994e3cf1b541ff32dfb03fbbc60eea68f9645b upstream.

Add support for the Intashield IS-100 1 port serial card.

Cc: stable@vger.kernel.org
Signed-off-by: Cameron Williams <cang1@live.co.uk>
Link: https://lore.kernel.org/r/DU0PR02MB7899A0E0CDAA505AF5A874CDC4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: 8250: Add support for Brainboxes UP cards

commit 2c6fec1e1532f15350be7e14ba6b88a39d289fe4 upstream.

Add support for the Brainboxes UP (powered PCI) range of
cards, namely UP-189, UP-200, UP-869 and UP-880.

Cc: stable@vger.kernel.org
Signed-off-by: Cameron Williams <cang1@live.co.uk>
Link: https://lore.kernel.org/r/DU0PR02MB7899B5B59FF3D8587E88C117C4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: 8250: Add support for additional Brainboxes UC cards

commit c563db486db7d245c0e2f319443417ae8e692f7f upstream.

Add device IDs for some more Brainboxes UC cards, namely
UC-235/UC-246, UC-253/UC-734, UC-302, UC-313, UC-346, UC-357,
UC-607 and UC-836.

Cc: stable@vger.kernel.org
Signed-off-by: Cameron Williams <cang1@live.co.uk>
Link: https://lore.kernel.org/r/DU0PR02MB789969998A6C3FAFCD95C85DC4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: 8250: Remove UC-257 and UC-431

commit 33092fb3af51deb80849e90a17bada44bbcde6b3 upstream.

The UC-257 is a serial + LPT card, so remove it from this driver.
A patch has been submitted to add it to parport_serial instead.

Additionaly, the UC-431 does not use this card ID, only the UC-420
does. The 431 is a 3-port card and there is no generic 3-port configuration
available, so remove reference to it from this driver.

Fixes: 152d1afa834c ("tty: Add support for Brainboxes UC cards.")
Cc: stable@vger.kernel.org
Signed-off-by: Cameron Williams <cang1@live.co.uk>
Link: https://lore.kernel.org/r/DU0PR02MB78995ADF7394C74AD4CF3357C4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: n_gsm: fix race condition in status line change on dead connections

commit 3a75b205de43365f80a33b98ec9289785da56243 upstream.

gsm_cleanup_mux() cleans up the gsm by closing all DLCIs, stopping all
timers, removing the virtual tty devices and clearing the data queues.
This procedure, however, may cause subsequent changes of the virtual modem
status lines of a DLCI. More data is being added the outgoing data queue
and the deleted kick timer is restarted to handle this. At this point many
resources have already been removed by the cleanup procedure. Thus, a
kernel panic occurs.

Fix this by proving in gsm_modem_update() that the cleanup procedure has
not been started and the mux is still alive.

Note that writing to a virtual tty is already protected by checks against
the DLCI specific connection state.

Fixes: c568f7086c6e ("tty: n_gsm: fix missing timer to handle stalled links")
Cc: stable <stable@kernel.org>
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20231026055844.3127-1-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: hci_bcm4377: Mark bcm4378/bcm4387 as BROKEN_LE_CODED

commit 41e9cdea9c4ab6606ca462ff4ec901a82d022c05 upstream.

bcm4378 and bcm4387 claim to support LE Coded PHY but fail to pair
(reliably) with BLE devices if it is enabled.
On bcm4378 pairing usually succeeds after 2-3 tries. On bcm4387
pairing appears to be completely broken.

Cc: stable@vger.kernel.org # 6.4.y+
Link: https://discussion.fedoraproject.org/t/mx-master-3-bluetooth-mouse-doesnt-connect/87072/33
Link: https://github.com/AsahiLinux/linux/issues/177
Fixes: 288c90224eec ("Bluetooth: Enable all supported LE PHY by default")
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: raw-gadget: properly handle interrupted requests

commit e8033bde451eddfb9b1bbd6e2d848c1b5c277222 upstream.

Currently, if a USB request that was queued by Raw Gadget is interrupted
(via a signal), wait_for_completion_interruptible returns -ERESTARTSYS.
Raw Gadget then attempts to propagate this value to userspace as a return
value from its ioctls. However, when -ERESTARTSYS is returned by a syscall
handler, the kernel internally restarts the syscall.

This doesn't allow userspace applications to interrupt requests queued by
Raw Gadget (which is required when the emulated device is asked to switch
altsettings). It also violates the implied interface of Raw Gadget that a
single ioctl must only queue a single USB request.

Instead, make Raw Gadget do what GadgetFS does: check whether the request
was interrupted (dequeued with status == -ECONNRESET) and report -EINTR to
userspace.

Fixes: f2c2e717642c ("usb: gadget: add raw-gadget interface")
Cc: stable <stable@kernel.org>
Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://lore.kernel.org/r/0db45b1d7cc466e3d4d1ab353f61d63c977fbbc5.1698350424.git.andreyknvl@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm()

commit 4987daf86c152ff882d51572d154ad12e4ff3a4b upstream.

It is possible that typec_register_partner() returns ERR_PTR on failure.
When port->partner is an error, a NULL pointer dereference may occur as
shown below.

[91222.095236][  T319] typec port0: failed to register partner (-17)
...
[91225.061491][  T319] Unable to handle kernel NULL pointer dereference
at virtual address 000000000000039f
[91225.274642][  T319] pc : tcpm_pd_data_request+0x310/0x13fc
[91225.274646][  T319] lr : tcpm_pd_data_request+0x298/0x13fc
[91225.308067][  T319] Call trace:
[91225.308070][  T319]  tcpm_pd_data_request+0x310/0x13fc
[91225.308073][  T319]  tcpm_pd_rx_handler+0x100/0x9e8
[91225.355900][  T319]  kthread_worker_fn+0x178/0x58c
[91225.355902][  T319]  kthread+0x150/0x200
[91225.355905][  T319]  ret_from_fork+0x10/0x30

Add a check for port->partner to avoid dereferencing a NULL pointer.

Fixes: 5e1d4c49fbc8 ("usb: typec: tcpm: Determine common SVDM Version")
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Hu <hhhuuu@google.com>
Link: https://lore.kernel.org/r/20231020012132.100960-1-hhhuuu@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: tcpm: Add additional checks for contaminant

commit 1a4a2df07c1f087704c24282cebe882268e38146 upstream.

When transitioning from SNK_DEBOUNCED to unattached, its worthwhile to
check for contaminant to mitigate wakeups.

```
[81334.219571] Start toggling
[81334.228220] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected]
[81334.305147] CC1: 0 -> 0, CC2: 0 -> 3 [state TOGGLING, polarity 0, connected]
[81334.305162] state change TOGGLING -> SNK_ATTACH_WAIT [rev3 NONE_AMS]
[81334.305187] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS]
[81334.475515] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms]
[81334.486480] CC1: 0 -> 0, CC2: 3 -> 0 [state SNK_DEBOUNCED, polarity 0, disconnected]
[81334.486495] state change SNK_DEBOUNCED -> SNK_DEBOUNCED [rev3 NONE_AMS]
[81334.486515] pending state change SNK_DEBOUNCED -> SNK_UNATTACHED @ 20 ms [rev3 NONE_AMS]
[81334.506621] state change SNK_DEBOUNCED -> SNK_UNATTACHED [delayed 20 ms]
[81334.506640] Start toggling
[81334.516972] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected]
[81334.592759] CC1: 0 -> 0, CC2: 0 -> 3 [state TOGGLING, polarity 0, connected]
[81334.592773] state change TOGGLING -> SNK_ATTACH_WAIT [rev3 NONE_AMS]
[81334.592792] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS]
[81334.762940] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms]
[81334.773557] CC1: 0 -> 0, CC2: 3 -> 0 [state SNK_DEBOUNCED, polarity 0, disconnected]
[81334.773570] state change SNK_DEBOUNCED -> SNK_DEBOUNCED [rev3 NONE_AMS]
[81334.773588] pending state change SNK_DEBOUNCED -> SNK_UNATTACHED @ 20 ms [rev3 NONE_AMS]
[81334.793672] state change SNK_DEBOUNCED -> SNK_UNATTACHED [delayed 20 ms]
[81334.793681] Start toggling
[81334.801840] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected]
[81334.878655] CC1: 0 -> 0, CC2: 0 -> 3 [state TOGGLING, polarity 0, connected]
[81334.878672] state change TOGGLING -> SNK_ATTACH_WAIT [rev3 NONE_AMS]
[81334.878696] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS]
[81335.048968] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms]
[81335.060684] CC1: 0 -> 0, CC2: 3 -> 0 [state SNK_DEBOUNCED, polarity 0, disconnected]
[81335.060754] state change SNK_DEBOUNCED -> SNK_DEBOUNCED [rev3 NONE_AMS]
[81335.060775] pending state change SNK_DEBOUNCED -> SNK_UNATTACHED @ 20 ms [rev3 NONE_AMS]
[81335.080884] state change SNK_DEBOUNCED -> SNK_UNATTACHED [delayed 20 ms]
[81335.080900] Start toggling
```

Cc: stable@vger.kernel.org
Fixes: 599f008c257d ("usb: typec: tcpm: Add callbacks to mitigate wakeups due to contaminant")
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20231015053108.2349570-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: storage: set 1.50 as the lower bcdDevice for older "Super Top" compatibility

commit 0e3139e6543b241b3e65956a55c712333bef48ac upstream.

Change lower bcdDevice value for "Super Top USB 2.0  SATA BRIDGE" to match
1.50. I have such an older device with bcdDevice=1.50 and it will not work
otherwise.

Cc: stable@vger.kernel.org
Signed-off-by: Liha Sikanen <lihasika@gmail.com>
Link: https://lore.kernel.org/r/ccf7d12a-8362-4916-b3e0-f4150f54affd@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device

commit 7e6f3b6d2c352b5fde37ce3fed83bdf6172eebd4 upstream.

The AMD VanGogh SoC contains a DesignWare USB3 Dual-Role Device that can be
operated as either a USB Host or a USB Device, similar to on the AMD Nolan
platform.

be6646bfbaec ("PCI: Prevent xHCI driver from claiming AMD Nolan USB3 DRD
device") added a quirk to let the dwc3 driver claim the Nolan device since
it provides more specific support.

Extend that quirk to include the VanGogh SoC USB3 device.

Link: https://lore.kernel.org/r/20230927202212.2388216-1-vi@endrift.com
Signed-off-by: Vicki Pfau <vi@endrift.com>
[bhelgaas: include be6646bfbaec reference, add stable tag]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v3.19+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: add quirk flag to enable native DSD for McIntosh devices

commit 99248c8902f505ec064cf2b0f74629016f2f4c82 upstream.

McIntosh devices supporting native DSD require the feature to be
explicitly exposed. Add a flag that fixes an issue where DSD audio was
defaulting to DSD over PCM instead of delivering raw DSD data.

Signed-off-by: Max McCarthy <mmccarthy@mcintoshlabs.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/BL0PR13MB4433226005162D186A8DFF4AD6DFA@BL0PR13MB4433.namprd13.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

eventfs: Use simple_recursive_removal() to clean up dentries

commit 407c6726ca71b33330d2d6345d9ea7ebc02575e9 upstream

Looking at how dentry is removed via the tracefs system, I found that
eventfs does not do everything that it did under tracefs. The tracefs
removal of a dentry calls simple_recursive_removal() that does a lot more
than a simple d_invalidate().

As it should be a requirement that any eventfs_inode that has a dentry, so
does its parent. When removing a eventfs_inode, if it has a dentry, a call
to simple_recursive_removal() on that dentry should clean up all the
dentries underneath it.

Add WARN_ON_ONCE() to check for the parent having a dentry if any children
do.

Link: https://lore.kernel.org/all/20231101022553.GE1957730@ZenIV/
Link: https://lkml.kernel.org/r/20231101172650.552471568@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Fixes: 5bdcd5f5331a2 ("eventfs: Implement removal of meta data from eventfs")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

eventfs: Delete eventfs_inode when the last dentry is freed

commit 020010fbfa202aa528a52743eba4ab0da3400a4e upstream

There exists a race between holding a reference of an eventfs_inode dentry
and the freeing of the eventfs_inode. If user space has a dentry held long
enough, it may still be able to access the dentry's eventfs_inode after it
has been freed.

To prevent this, have he eventfs_inode freed via the last dput() (or via
RCU if the eventfs_inode does not have a dentry).

This means reintroducing the eventfs_inode del_list field at a temporary
place to put the eventfs_inode. It needs to mark it as freed (via the
list) but also must invalidate the dentry immediately as the return from
eventfs_remove_dir() expects that they are. But the dentry invalidation
must not be called under the eventfs_mutex, so it must be done after the
eventfs_inode is marked as free (put on a deletion list).

Link: https://lkml.kernel.org/r/20231101172650.123479767@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ajay Kaher <akaher@vmware.com>
Fixes: 5bdcd5f5331a2 ("eventfs: Implement removal of meta data from eventfs")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

eventfs: Save ownership and mode

commit 28e12c09f5aa081b2d13d1340e3610070b6c624d upstream

Now that inodes and dentries are created on the fly, they are also
reclaimed on memory pressure. Since the ownership and file mode are saved
in the inode, if they are freed, any changes to the ownership and mode
will be lost.

To counter this, if the user changes the permissions or ownership, save
them, and when creating the inodes again, restore those changes.

Link: https://lkml.kernel.org/r/20231101172649.691841445@goodmis.org
Cc: stable@vger.kernel.org
Cc: Ajay Kaher <akaher@vmware.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 63940449555e7 ("eventfs: Implement eventfs lookup, read, open functions")
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

eventfs: Remove "is_freed" union with rcu head

commit f2f496370afcbc5227d7002da28c74b91fed12ff upstream

The eventfs_inode->is_freed was a union with the rcu_head with the
assumption that when it was on the srcu list the head would contain a
pointer which would make "is_freed" true. But that was a wrong assumption
as the rcu head is a single link list where the last element is NULL.

Instead, split the nr_entries integer so that "is_freed" is one bit and
the nr_entries is the next 31 bits. As there shouldn't be more than 10
(currently there's at most 5 to 7 depending on the config), this should
not be a problem.

Link: https://lkml.kernel.org/r/20231101172649.049758712@goodmis.org
Cc: stable@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ajay Kaher <akaher@vmware.com>
Fixes: 63940449555e7 ("eventfs: Implement eventfs lookup, read, open functions")
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Have trace_event_file have ref counters

commit bb32500fb9b78215e4ef6ee8b4345c5f5d7eafb4 upstream

The following can crash the kernel:

 # cd /sys/kernel/tracing
 # echo 'p:sched schedule' > kprobe_events
 # exec 5>>events/kprobes/sched/enable
 # > kprobe_events
 # exec 5>&-

The above commands:

 1. Change directory to the tracefs directory
 2. Create a kprobe event (doesn't matter what one)
 3. Open bash file descriptor 5 on the enable file of the kprobe event
 4. Delete the kprobe event (removes the files too)
 5. Close the bash file descriptor 5

The above causes a crash!

 BUG: kernel NULL pointer dereference, address: 0000000000000028
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 0 P4D 0
 Oops: 0000 [#1] PREEMPT SMP PTI
 CPU: 6 PID: 877 Comm: bash Not tainted 6.5.0-rc4-test-00008-g2c6b6b1029d4-dirty #186
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
 RIP: 0010:tracing_release_file_tr+0xc/0x50

What happens here is that the kprobe event creates a trace_event_file
"file" descriptor that represents the file in tracefs to the event. It
maintains state of the event (is it enabled for the given instance?).
Opening the "enable" file gets a reference to the event "file" descriptor
via the open file descriptor. When the kprobe event is deleted, the file is
also deleted from the tracefs system which also frees the event "file"
descriptor.

But as the tracefs file is still opened by user space, it will not be
totally removed until the final dput() is called on it. But this is not
true with the event "file" descriptor that is already freed. If the user
does a write to or simply closes the file descriptor it will reference the
event "file" descriptor that was just freed, causing a use-after-free bug.

To solve this, add a ref count to the event "file" descriptor as well as a
new flag called "FREED". The "file" will not be freed until the last
reference is released. But the FREE flag will be set when the event is
removed to prevent any more modifications to that event from happening,
even if there's still a reference to the event "file" descriptor.

Link: https://lore.kernel.org/linux-trace-kernel/20231031000031.1e705592@gandalf.local.home/
Link: https://lore.kernel.org/linux-trace-kernel/20231031122453.7a48b923@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Fixes: f5ca233e2e66d ("tracing: Increase trace array ref count on enable and filter files")
Reported-by: Beau Belgrave <beaub@linux.microsoft.com>
Tested-by: Beau Belgrave <beaub@linux.microsoft.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf evlist: Avoid frequency mode for the dummy event

[ Upstream commit f9cdeb58a9cf46c09b56f5f661ea8da24b6458c3 ]

Dummy events are created with an attribute where the period and freq
are zero. evsel__config will then see the uninitialized values and
initialize them in evsel__default_freq_period. As fequency mode is
used by default the dummy event would be set to use frequency
mode. However, this has no effect on the dummy event but does cause
unnecessary timers/interrupts. Avoid this overhead by setting the
period to 1 for dummy events.

evlist__add_aux_dummy calls evlist__add_dummy then sets freq=0 and
period=1. This isn't necessary after this change and so the setting is
removed.

From Stephane:

The dummy event is not counting anything. It is used to collect mmap
records and avoid a race condition during the synthesize mmap phase of
perf record. As such, it should not cause any overhead during active
profiling. Yet, it did. Because of a bug the dummy event was
programmed as a sampling event in frequency mode. Events in that mode
incur more kernel overheads because on timer tick, the kernel has to
look at the number of samples for each event and potentially adjust
the sampling period to achieve the desired frequency. The dummy event
was therefore adding a frequency event to task and ctx contexts we may
otherwise not have any, e.g.,

  perf record -a -e cpu/event=0x3c,period=10000000/.

On each timer tick the perf_adjust_freq_unthr_context() is invoked and
if ctx->nr_freq is non-zero, then the kernel will loop over ALL the
events of the context looking for frequency mode ones. In doing, so it
locks the context, and enable/disable the PMU of each hw event. If all
the events of the context are in period mode, the kernel will have to
traverse the list for nothing incurring overhead. The overhead is
multiplied by a very large factor when this happens in a guest kernel.
There is no need for the dummy event to be in frequency mode, it does
not count anything and therefore should not cause extra overhead for
no reason.

Fixes: 5bae0250237f ("perf evlist: Introduce perf_evlist__new_dummy constructor")
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20230916035640.1074422-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: core: Use blocking_notifier_call_chain to avoid RCU complaint

[ Upstream commit bbaa6ffa5b6c9609d3b3c431c389b407eea5441f ]

AMD PMF driver can cause the following warning:
[  196.159546] ------------[ cut here ]------------
[  196.159556] Voluntary context switch within RCU read-side critical section!
[  196.159571] WARNING: CPU: 0 PID: 9 at kernel/rcu/tree_plugin.h:320 rcu_note_context_switch+0x43d/0x560
[  196.159604] Modules linked in: nvme_fabrics ccm rfcomm snd_hda_scodec_cs35l41_spi cmac algif_hash algif_skcipher af_alg bnep joydev btusb btrtl uvcvideo btintel btbcm videobuf2_vmalloc intel_rapl_msr btmtk videobuf2_memops uvc videobuf2_v4l2 intel_rapl_common binfmt_misc hid_sensor_als snd_sof_amd_vangogh hid_sensor_trigger bluetooth industrialio_triggered_buffer videodev snd_sof_amd_rembrandt hid_sensor_iio_common amdgpu ecdh_generic kfifo_buf videobuf2_common hp_wmi kvm_amd sparse_keymap snd_sof_amd_renoir wmi_bmof industrialio ecc mc nls_iso8859_1 kvm snd_sof_amd_acp irqbypass snd_sof_xtensa_dsp crct10dif_pclmul crc32_pclmul mt7921e snd_sof_pci snd_ctl_led polyval_clmulni mt7921_common polyval_generic snd_sof ghash_clmulni_intel mt792x_lib mt76_connac_lib sha512_ssse3 snd_sof_utils aesni_intel snd_hda_codec_realtek crypto_simd mt76 snd_hda_codec_generic cryptd snd_soc_core snd_hda_codec_hdmi rapl ledtrig_audio input_leds snd_compress i2c_algo_bit drm_ttm_helper mac80211 snd_pci_ps hid_multitouch ttm drm_exec
[  196.159970]  drm_suballoc_helper snd_rpl_pci_acp6x amdxcp drm_buddy snd_hda_intel snd_acp_pci snd_hda_scodec_cs35l41_i2c serio_raw gpu_sched snd_hda_scodec_cs35l41 snd_acp_legacy_common snd_intel_dspcfg snd_hda_cs_dsp_ctls snd_hda_codec libarc4 drm_display_helper snd_pci_acp6x cs_dsp snd_hwdep snd_soc_cs35l41_lib video k10temp snd_pci_acp5x thunderbolt snd_hda_core drm_kms_helper cfg80211 snd_seq snd_rn_pci_acp3x snd_pcm snd_acp_config cec snd_soc_acpi snd_seq_device rc_core ccp snd_pci_acp3x snd_timer snd soundcore wmi amd_pmf platform_profile amd_pmc mac_hid serial_multi_instantiate wireless_hotkey hid_sensor_hub sch_fq_codel msr parport_pc ppdev lp parport efi_pstore ip_tables x_tables autofs4 btrfs blake2b_generic raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx libcrc32c xor raid6_pq raid1 raid0 multipath linear dm_mirror dm_region_hash dm_log cdc_ether usbnet r8152 mii hid_generic nvme i2c_hid_acpi i2c_hid nvme_core i2c_piix4 xhci_pci amd_sfh drm xhci_pci_renesas nvme_common hid
[  196.160382] CPU: 0 PID: 9 Comm: kworker/0:1 Not tainted 6.6.0-rc1 #4
[  196.160397] Hardware name: HP HP EliteBook 845 14 inch G10 Notebook PC/8B6E, BIOS V82 Ver. 01.02.00 08/24/2023
[  196.160405] Workqueue: events power_supply_changed_work
[  196.160426] RIP: 0010:rcu_note_context_switch+0x43d/0x560
[  196.160440] Code: 00 48 89 be 40 08 00 00 48 89 86 48 08 00 00 48 89 10 e9 63 fe ff ff 48 c7 c7 10 e7 b0 9e c6 05 e8 d8 20 02 01 e8 13 0f f3 ff <0f> 0b e9 27 fc ff ff a9 ff ff ff 7f 0f 84 cf fc ff ff 65 48 8b 3c
[  196.160450] RSP: 0018:ffffc900001878f0 EFLAGS: 00010046
[  196.160462] RAX: 0000000000000000 RBX: ffff88885e834040 RCX: 0000000000000000
[  196.160470] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[  196.160476] RBP: ffffc90000187910 R08: 0000000000000000 R09: 0000000000000000
[  196.160482] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
[  196.160488] R13: 0000000000000000 R14: ffff888100990000 R15: ffff888100990000
[  196.160495] FS:  0000000000000000(0000) GS:ffff88885e800000(0000) knlGS:0000000000000000
[  196.160504] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  196.160512] CR2: 000055cb053c8246 CR3: 000000013443a000 CR4: 0000000000750ef0
[  196.160520] PKRU: 55555554
[  196.160526] Call Trace:
[  196.160532]  <TASK>
[  196.160548]  ? show_regs+0x72/0x90
[  196.160570]  ? rcu_note_context_switch+0x43d/0x560
[  196.160580]  ? __warn+0x8d/0x160
[  196.160600]  ? rcu_note_context_switch+0x43d/0x560
[  196.160613]  ? report_bug+0x1bb/0x1d0
[  196.160637]  ? handle_bug+0x46/0x90
[  196.160658]  ? exc_invalid_op+0x19/0x80
[  196.160675]  ? asm_exc_invalid_op+0x1b/0x20
[  196.160709]  ? rcu_note_context_switch+0x43d/0x560
[  196.160727]  __schedule+0xb9/0x15f0
[  196.160746]  ? srso_alias_return_thunk+0x5/0x7f
[  196.160765]  ? srso_alias_return_thunk+0x5/0x7f
[  196.160778]  ? acpi_ns_search_one_scope+0xbe/0x270
[  196.160806]  schedule+0x68/0x110
[  196.160820]  schedule_timeout+0x151/0x160
[  196.160829]  ? srso_alias_return_thunk+0x5/0x7f
[  196.160842]  ? srso_alias_return_thunk+0x5/0x7f
[  196.160855]  ? acpi_ns_lookup+0x3c5/0xa90
[  196.160878]  __down_common+0xff/0x220
[  196.160905]  __down_timeout+0x16/0x30
[  196.160920]  down_timeout+0x64/0x70
[  196.160938]  acpi_os_wait_semaphore+0x85/0x200
[  196.160959]  acpi_ut_acquire_mutex+0x9e/0x280
[  196.160979]  acpi_ex_enter_interpreter+0x2d/0xb0
[  196.160992]  acpi_ns_evaluate+0x2f0/0x5f0
[  196.161005]  acpi_evaluate_object+0x172/0x490
[  196.161018]  ? acpi_os_signal_semaphore+0x8a/0xd0
[  196.161038]  acpi_evaluate_integer+0x52/0xe0
[  196.161055]  ? kfree+0x79/0x120
[  196.161071]  ? srso_alias_return_thunk+0x5/0x7f
[  196.161089]  acpi_ac_get_state.part.0+0x27/0x80
[  196.161110]  get_ac_property+0x5c/0x70
[  196.161127]  ? __pfx___power_supply_is_system_supplied+0x10/0x10
[  196.161146]  __power_supply_is_system_supplied+0x44/0xb0
[  196.161166]  class_for_each_device+0x124/0x160
[  196.161184]  ? acpi_ac_get_state.part.0+0x27/0x80
[  196.161203]  ? srso_alias_return_thunk+0x5/0x7f
[  196.161223]  power_supply_is_system_supplied+0x3c/0x70
[  196.161243]  amd_pmf_get_power_source+0xe/0x20 [amd_pmf]
[  196.161276]  amd_pmf_power_slider_update_event+0x49/0x90 [amd_pmf]
[  196.161310]  amd_pmf_pwr_src_notify_call+0xe7/0x100 [amd_pmf]
[  196.161340]  notifier_call_chain+0x5f/0xe0
[  196.161362]  atomic_notifier_call_chain+0x33/0x60
[  196.161378]  power_supply_changed_work+0x84/0x110
[  196.161394]  process_one_work+0x178/0x360
[  196.161412]  ? __pfx_worker_thread+0x10/0x10
[  196.161424]  worker_thread+0x307/0x430
[  196.161440]  ? __pfx_worker_thread+0x10/0x10
[  196.161451]  kthread+0xf4/0x130
[  196.161467]  ? __pfx_kthread+0x10/0x10
[  196.161486]  ret_from_fork+0x43/0x70
[  196.161502]  ? __pfx_kthread+0x10/0x10
[  196.161518]  ret_from_fork_asm+0x1b/0x30
[  196.161558]  </TASK>
[  196.161562] ---[ end trace 0000000000000000 ]---

Since there's no guarantee that all the callbacks can work in atomic
context, switch to use blocking_notifier_call_chain to relax the
constraint.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reported-by: Allen Zhong <allen@atr.me>
Fixes: 4c71ae414474 ("platform/x86/amd/pmf: Add support SPS PMF feature")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217571
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230913033233.602986-1-kai.heng.feng@canonical.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Don't use fsleep for PSR exit waits

[ Upstream commit 79df45dc4bfb13d9bd3a75338b9d9dab948be3d6 ]

[Why]
These functions can be called from high IRQ levels and the OS will hang
if it tries to use a usleep_highres or a msleep.

[How]
Replace the fsleep with a udelay.

Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 6.6

Merge tag 'x86-urgent-2023-10-28' of git://git./linux/kernel/git/tip/tip

Pull misc x86 fixes from Ingo Molnar:

 - Fix a possible CPU hotplug deadlock bug caused by the new TSC
   synchronization code

 - Fix a legacy PIC discovery bug that results in device troubles on
   affected systems, such as non-working keybards, etc

 - Add a new Intel CPU model number to <asm/intel-family.h>

* tag 'x86-urgent-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/tsc: Defer marking TSC unstable to a worker
  x86/i8259: Skip probing when ACPI/MADT advertises PCAT compatibility
  x86/cpu: Add model number for Intel Arrow Lake mobile processor

Merge tag 'irq-urgent-2023-10-28' of git://git./linux/kernel/git/tip/tip

Pull irq fix from Ingo Molnar:
 "Restore unintentionally lost quirk settings in the GIC irqchip driver,
  which broke certain devices"

* tag 'irq-urgent-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3-its: Don't override quirk settings with default values

Merge tag 'perf-urgent-2023-10-28' of git://git./linux/kernel/git/tip/tip

Pull perf event fix from Ingo Molnar:
 "Fix a potential NULL dereference bug"

* tag 'perf-urgent-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Fix potential NULL deref

Merge tag 'probes-fixes-v6.6-rc7' of git://git./linux/kernel/git/trace/linux-trace

Pull probes fixes from Masami Hiramatsu:

 - tracing/kprobes: Fix kernel-doc warnings for the variable length
   arguments

 - tracing/kprobes: Fix to count the symbols in modules even if the
   module name is not specified so that user can probe the symbols in
   the modules without module name

* tag 'probes-fixes-v6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing/kprobes: Fix symbol counting logic by looking at modules as well
  tracing/kprobes: Fix the description of variable length arguments

Merge tag 'dma-mapping-6.6-2023-10-28' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping fix from Christoph Hellwig:

 - reduce the initialy dynamic swiotlb size to remove an annoying but
   harmless warning from the page allocator (Petr Tesarik)

* tag 'dma-mapping-6.6-2023-10-28' of git://git.infradead.org/users/hch/dma-mapping:
  swiotlb: do not try to allocate a TLB bigger than MAX_ORDER pages

Merge tag 'char-misc-6.6-final' of git://git./linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
 "Here are some very small driver fixes for 6.6-final that have shown up
  in the past two weeks. Included in here are:

   - tiny fastrpc bugfixes for reported errors

   - nvmem register fixes

   - iio driver fixes for some reported problems

   - fpga test fix

   - MAINTAINERS file update for fpga

  All of these have been in linux-next this week with no reported
  problems"

* tag 'char-misc-6.6-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  fpga: Fix memory leak for fpga_region_test_class_find()
  fpga: m10bmc-sec: Change contact for secure update driver
  fpga: disable KUnit test suites when module support is enabled
  iio: afe: rescale: Accept only offset channels
  nvmem: imx: correct nregs for i.MX6ULL
  nvmem: imx: correct nregs for i.MX6UL
  nvmem: imx: correct nregs for i.MX6SLL
  misc: fastrpc: Unmap only if buffer is unmapped from DSP
  misc: fastrpc: Clean buffers on remote invocation failures
  misc: fastrpc: Free DMA handles for RPC calls with no arguments
  misc: fastrpc: Reset metadata buffer to avoid incorrect free
  iio: exynos-adc: request second interupt only when touchscreen mode is used
  iio: adc: xilinx-xadc: Correct temperature offset/scale for UltraScale
  iio: adc: xilinx-xadc: Don't clobber preset voltage/temperature thresholds
  dt-bindings: iio: add missing reset-gpios constrain

Merge tag 'i2c-for-6.6-rc8' of git://git./linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
 "Bugfixes for Axxia when it is a target and for PEC handling of
  stm32f7.

  Plus, fix an OF node leak pattern in the mux subsystem"

* tag 'i2c-for-6.6-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: stm32f7: Fix PEC handling in case of SMBUS transfers
  i2c: muxes: i2c-mux-gpmux: Use of_get_i2c_adapter_by_node()
  i2c: muxes: i2c-demux-pinctrl: Use of_get_i2c_adapter_by_node()
  i2c: muxes: i2c-mux-pinctrl: Use of_get_i2c_adapter_by_node()
  i2c: aspeed: Fix i2c bus hang in slave read

Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux

Pull clk fixes from Stephen Boyd:
 "Three fixes, one for the clk framework and two for clk drivers:

   - Avoid an oops in possible_parent_show() by checking for no parent
     properly when a DT index based lookup is used

   - Handle errors returned from divider_ro_round_rate() in
     clk_stm32_composite_determine_rate()

   - Fix clk_ops::determine_rate() implementation of socfpga's
     gateclk_ops that was ruining uart output because the divider
     was forgotten about"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: stm32: Fix a signedness issue in clk_stm32_composite_determine_rate()
  clk: Sanitize possible_parent_show to Handle Return Value of of_clk_get_parent_name
  clk: socfpga: gate: Account for the divider in determine_rate

Merge tag 'pull-fixes' of git://git./linux/kernel/git/viro/vfs

Pull misc filesystem fixes from Al Viro:
 "Assorted fixes all over the place: literally nothing in common, could
  have been three separate pull requests.

  All are simple regression fixes, but not for anything from this cycle"

* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  ceph_wait_on_conflict_unlink(): grab reference before dropping ->d_lock
  io_uring: kiocb_done() should *not* trust ->ki_pos if ->{read,write}_iter() failed
  sparc32: fix a braino in fault handling in csum_and_copy_..._user()

tracing/kprobes: Fix symbol counting logic by looking at modules as well

Recent changes to count number of matching symbols when creating
a kprobe event failed to take into account kernel modules. As such, it
breaks kprobes on kernel module symbols, by assuming there is no match.

Fix this my calling module_kallsyms_on_each_symbol() in addition to
kallsyms_on_each_match_symbol() to perform a proper counting.

Link: https://lore.kernel.org/all/20231027233126.2073148-1-andrii@kernel.org/
Cc: Francis Laniel <flaniel@linux.microsoft.com>
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Fixes: b022f0c7e404 ("tracing/kprobes: Return EADDRNOTAVAIL when func matches several symbols")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

ceph_wait_on_conflict_unlink(): grab reference before dropping ->d_lock

Use of dget() after we'd dropped ->d_lock is too late - dentry might
be gone by that point.

Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

io_uring: kiocb_done() should *not* trust ->ki_pos if ->{read,write}_iter() failed

->ki_pos value is unreliable in such cases.  For an obvious example,
consider O_DSYNC write - we feed the data to page cache and start IO,
then we make sure it's completed.  Update of ->ki_pos is dealt with
by the first part; failure in the second ends up with negative value
returned _and_ ->ki_pos left advanced as if sync had been successful.
In the same situation write(2) does not advance the file position
at all.

Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Merge tag 'io_uring-6.6-2023-10-27' of git://git.kernel.dk/linux

Pull io_uring fixes from Jens Axboe:
 "Fix for an issue reported where reading fdinfo could find a NULL
  thread as we didn't properly synchronize, and then a disable for the
  IOCB_DIO_CALLER_COMP optimization as a recent reported highlighted how
  that could lead to deadlocks if the task issued async O_DIRECT writes
  and then proceeded to do sync fallocate() calls"

* tag 'io_uring-6.6-2023-10-27' of git://git.kernel.dk/linux:
  io_uring/rw: disable IOCB_DIO_CALLER_COMP
  io_uring/fdinfo: lock SQ thread while retrieving thread cpu/pid

sparc32: fix a braino in fault handling in csum_and_copy_..._user()

Fault handler used to make non-trivial calls, so it needed
to set a stack frame up.  Used to be
save ... - grab a stack frame, old %o... become %i...
....
ret - go back to address originally in %o7, currently %i7
 restore - switch to previous stack frame, in delay slot
Non-trivial calls had been gone since ab5e8b331244 and that code should
have become
retl - go back to address in %o7
 clr %o0 - have return value set to 0
What it had become instead was
ret - go back to address in %i7 - return address of *caller*
 clr %o0 - have return value set to 0
which is not good, to put it mildly - we forcibly return 0 from
csum_and_copy_{from,to}_iter() (which is what the call of that
thing had been inlined into) and do that without dropping the
stack frame of said csum_and_copy_..._iter().  Confuses the
hell out of the caller of csum_and_copy_..._iter(), obviously...

Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Fixes: ab5e8b331244 "sparc32: propagate the calling conventions change down to __csum_partial_copy_sparc_generic()"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Merge tag 'block-6.6-2023-10-27' of git://git.kernel.dk/linux

Pull block fix from Jens Axboe:
 "Just a single fix for a potential divide-by-zero, introduced in this
  cycle"

* tag 'block-6.6-2023-10-27' of git://git.kernel.dk/linux:
  blk-throttle: check for overflow in calculate_bytes_allowed

Merge tag 'ata-6.6-final' of git://git./linux/kernel/git/dlemoal/libata

Pull ATA fix from Damien Le Moal:
 "A single patch to fix a regression introduced by the recent
  suspend/resume fixes.

  The regression is that ATA disks are not stopped on system shutdown,
  which is not recommended and increases the disks SMART counters for
  unclean power off events.

  This patch fixes this by refining the recent rework of the scsi device
  manage_xxx flags"

* tag 'ata-6.6-final' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  scsi: sd: Introduce manage_shutdown device flag

Merge tag 'platform-drivers-x86-v6.6-6' of git://git./linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fix from Hans de Goede:
 "A single patch to extend the AMD PMC driver DMI quirk list
  for laptops which need special handling to avoid NVME s2idle
  suspend/resume errors"

* tag 'platform-drivers-x86-v6.6-6' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: Add s2idle quirk for more Lenovo laptops

x86/tsc: Defer marking TSC unstable to a worker

Tetsuo reported the following lockdep splat when the TSC synchronization
fails during CPU hotplug:

   tsc: Marking TSC unstable due to check_tsc_sync_source failed

   WARNING: inconsistent lock state
   inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
   ffffffff8cfa1c78 (watchdog_lock){?.-.}-{2:2}, at: clocksource_watchdog+0x23/0x5a0
   {IN-HARDIRQ-W} state was registered at:
     _raw_spin_lock_irqsave+0x3f/0x60
     clocksource_mark_unstable+0x1b/0x90
     mark_tsc_unstable+0x41/0x50
     check_tsc_sync_source+0x14f/0x180
     sysvec_call_function_single+0x69/0x90

   Possible unsafe locking scenario:
     lock(watchdog_lock);
     <Interrupt>
       lock(watchdog_lock);

   stack backtrace:
    _raw_spin_lock+0x30/0x40
    clocksource_watchdog+0x23/0x5a0
    run_timer_softirq+0x2a/0x50
    sysvec_apic_timer_interrupt+0x6e/0x90

The reason is the recent conversion of the TSC synchronization function
during CPU hotplug on the control CPU to a SMP function call. In case
that the synchronization with the upcoming CPU fails, the TSC has to be
marked unstable via clocksource_mark_unstable().

clocksource_mark_unstable() acquires 'watchdog_lock', but that lock is
taken with interrupts enabled in the watchdog timer callback to minimize
interrupt disabled time. That's obviously a possible deadlock scenario,

Before that change the synchronization function was invoked in thread
context so this could not happen.

As it is not crucical whether the unstable marking happens slightly
delayed, defer the call to a worker thread which avoids the lock context
problem.

Fixes: 9d349d47f0e3 ("x86/smpboot: Make TSC synchronization function call based")
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87zg064ceg.ffs@tglx

x86/i8259: Skip probing when ACPI/MADT advertises PCAT compatibility

David and a few others reported that on certain newer systems some legacy
interrupts fail to work correctly.

Debugging revealed that the BIOS of these systems leaves the legacy PIC in
uninitialized state which makes the PIC detection fail and the kernel
switches to a dummy implementation.

Unfortunately this fallback causes quite some code to fail as it depends on
checks for the number of legacy PIC interrupts or the availability of the
real PIC.

In theory there is no reason to use the PIC on any modern system when
IO/APIC is available, but the dependencies on the related checks cannot be
resolved trivially and on short notice. This needs lots of analysis and
rework.

The PIC detection has been added to avoid quirky checks and force selection
of the dummy implementation all over the place, especially in VM guest
scenarios. So it's not an option to revert the relevant commit as that
would break a lot of other scenarios.

One solution would be to try to initialize the PIC on detection fail and
retry the detection, but that puts the burden on everything which does not
have a PIC.

Fortunately the ACPI/MADT table header has a flag field, which advertises
in bit 0 that the system is PCAT compatible, which means it has a legacy
8259 PIC.

Evaluate that bit and if set avoid the detection routine and keep the real
PIC installed, which then gets initialized (for nothing) and makes the rest
of the code with all the dependencies work again.

Fixes: e179f6914152 ("x86, irq, pic: Probe for legacy PIC and set legacy_pic appropriately")
Reported-by: David Lazar <dlazar@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: David Lazar <dlazar@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: stable@vger.kernel.org
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218003
Link: https://lore.kernel.org/r/875y2u5s8g.ffs@tglx

x86/cpu: Add model number for Intel Arrow Lake mobile processor

For "reasons" Intel has code-named this CPU with a "_H" suffix.

[ dhansen: As usual, apply this and send it upstream quickly to
   make it easier for anyone who is doing work that
   consumes this. ]

Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20231025202513.12358-1-tony.luck%40intel.com

Merge tag 'iommu-fix-v6.6-rc7' of git://git./linux/kernel/git/joro/iommu

Pull iommu fix from Joerg Roedel:

 - Fix boot regression for Sapphire Rapids with Intel VT-d driver

* tag 'iommu-fix-v6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu: Avoid unnecessary cache invalidations

Merge tag 'powerpc-6.6-6' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

 - Fix boot crash with FLATMEM since set_ptes() introduction

 - Avoid calling arch_enter/leave_lazy_mmu() in set_ptes()

Thanks to Aneesh Kumar K.V and Erhard Furtner.

* tag 'powerpc-6.6-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/mm: Avoid calling arch_enter/leave_lazy_mmu() in set_ptes
  powerpc/mm: Fix boot crash with FLATMEM

platform/x86: Add s2idle quirk for more Lenovo laptops

When suspending to idle and resuming on some Lenovo laptops using the
Mendocino APU, multiple NVME IOMMU page faults occur, showing up in
dmesg as repeated errors:

nvme 0000:01:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x000b
address=0xb6674000 flags=0x0000]

The system is unstable afterwards.

Applying the s2idle quirk introduced by commit 455cd867b85b ("platform/x86:
thinkpad_acpi: Add a s2idle resume quirk for a number of laptops")
allows these systems to work with the IOMMU enabled and s2idle
resume to work.

Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218024
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Suggested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: David Lazar <dlazar@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/ZTlsyOaFucF2pWrL@localhost
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

tracing/kprobes: Fix the description of variable length arguments

Fix the following kernel-doc warnings:

kernel/trace/trace_kprobe.c:1029: warning: Excess function parameter 'args' description in '__kprobe_event_gen_cmd_start'
kernel/trace/trace_kprobe.c:1097: warning: Excess function parameter 'args' description in '__kprobe_event_add_fields'

Refer to the usage of variable length arguments elsewhere in the kernel
code, "@..." is the proper way to express it in the description.

Link: https://lore.kernel.org/all/20231027041315.2613166-1-yujie.liu@intel.com/
Fixes: 2a588dd1d5d6 ("tracing: Add kprobe event command generation functions")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310190437.paI6LYJF-lkp@intel.com/
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

iommu: Avoid unnecessary cache invalidations

The iommu_create_device_direct_mappings() only needs to flush the caches
when the mappings are changed in the affected domain. This is not true
for non-DMA domains, or for devices attached to the domain that have no
reserved regions. To avoid unnecessary cache invalidations, add a check
before iommu_flush_iotlb_all().

Fixes: a48ce36e2786 ("iommu: Prevent RESV_DIRECT devices from blocking domains")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Henry Willard <henry.willard@oracle.com>
Link: https://lore.kernel.org/r/20231026084942.17387-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>

Merge tag 'drm-fixes-2023-10-27' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
 "This is the final set of fixes for 6.6, just misc bits mainly in
  amdgpu and i915, nothing too noteworthy.

  amdgpu:
   - ignore duplicated BOs in CS parser
   - remove redundant call to amdgpu_ctx_priority_is_valid()
   - Extend VI APSM quirks to more platforms

  amdkfd:
   - reserve fence slot while locking BO

  dp_mst:
   - Fix NULL deref in get_mst_branch_device_by_guid_helper()

  logicvc:
   - Kconfig: Select REGMAP and REGMAP_MMIO

  ivpu:
   - Fix missing VPUIP interrupts

  i915:
   - Determine context valid in OA reports
   - Hold GT forcewake during steering operations
   - Check if PMU is closed before stopping event"

* tag 'drm-fixes-2023-10-27' of git://anongit.freedesktop.org/drm/drm:
  accel/ivpu/37xx: Fix missing VPUIP interrupts
  drm/amd: Disable ASPM for VI w/ all Intel systems
  drm/i915/pmu: Check if pmu is closed before stopping event
  drm/i915/mcr: Hold GT forcewake during steering operations
  drm/logicvc: Kconfig: select REGMAP and REGMAP_MMIO
  drm/i915/perf: Determine context valid in OA reports
  drm/amdkfd: reserve a fence slot while locking the BO
  drm/amdgpu: Remove redundant call to priority_is_valid()
  drm/dp_mst: Fix NULL deref in get_mst_branch_device_by_guid_helper()
  drm/amdgpu: ignore duplicate BOs again

Merge tag 'amd-drm-fixes-6.6-2023-10-25' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.6-2023-10-25:

amdgpu:
- Extend VI APSM quirks to more platforms

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231026035452.14921-1-alexander.deucher@amd.com

Merge tag 'drm-intel-fixes-2023-10-26' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Determine context valid in OA reports (Umesh)
- Hold GT forcewake during steering operations (Matt Roper)
- Check if PMU is closed before stopping event (Umesh)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZTp8IQ0wxzxVjN7J@intel.com

Merge tag 'drm-misc-fixes-2023-10-26' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

Short summary of fixes pull:

amdgpu:
- ignore duplicated BOs in CS parser
- remove redundant call to amdgpu_ctx_priority_is_valid()

amdkfd:
- reserve fence slot while locking BO

dp_mst:
- Fix NULL deref in get_mst_branch_device_by_guid_helper()

logicvc:
- Kconfig: Select REGMAP and REGMAP_MMIO

ivpu:
- Fix missing VPUIP interrupts

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231026110132.GA10591@linux-uq9g.fritz.box

scsi: sd: Introduce manage_shutdown device flag

Commit aa3998dbeb3a ("ata: libata-scsi: Disable scsi device
manage_system_start_stop") change setting the manage_system_start_stop
flag to false for libata managed disks to enable libata internal
management of disk suspend/resume. However, a side effect of this change
is that on system shutdown, disks are no longer being stopped (set to
standby mode with the heads unloaded). While this is not a critical
issue, this unclean shutdown is not recommended and shows up with
increased smart counters (e.g. the unexpected power loss counter
"Unexpect_Power_Loss_Ct").

Instead of defining a shutdown driver method for all ATA adapter
drivers (not all of them define that operation), this patch resolves
this issue by further refining the sd driver start/stop control of disks
using the new flag manage_shutdown. If this new flag is set to true by
a low level driver, the function sd_shutdown() will issue a
START STOP UNIT command with the start argument set to 0 when a disk
needs to be powered off (suspended) on system power off, that is, when
system_state is equal to SYSTEM_POWER_OFF.

Similarly to the other manage_xxx flags, the new manage_shutdown flag is
exposed through sysfs as a read-write device attribute.

To avoid any confusion between manage_shutdown and
manage_system_start_stop, the comments describing these flags in
include/scsi/scsi.h are also improved.

Fixes: aa3998dbeb3a ("ata: libata-scsi: Disable scsi device manage_system_start_stop")
Cc: stable@vger.kernel.org
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218038
Link: https://lore.kernel.org/all/cd397c88-bf53-4768-9ab8-9d107df9e613@gmail.com/
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>

Merge tag 'soc-fixes-6.7-3' of git://git./linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "A couple of platforms have some last-minute fixes, in particular:

   - riscv gets some fixes for noncoherent DMA on the renesas and thead
     platforms and dts fix for SPI on the visionfive 2 board

   - Qualcomm Snapdragon gets three dts fixes to address board specific
     regressions on the pmic and gpio nodes

   - Rockchip platforms get multiple dts fixes to address issues on the
     recent rk3399 platform as well as the older rk3128 platform that
     apparently regressed a while ago.

   - TI OMAP gets some trivial code and dts fixes and a regression fix
     for the omap1 ams-delta modem

   - NXP i.MX firmware has one fix for a use-after-free but in its error
     handling"

* tag 'soc-fixes-6.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
  soc: renesas: ARCH_R9A07G043 depends on !RISCV_ISA_ZICBOM
  riscv: only select DMA_DIRECT_REMAP from RISCV_ISA_ZICBOM and ERRATA_THEAD_PBMT
  riscv: RISCV_NONSTANDARD_CACHE_OPS shouldn't depend on RISCV_DMA_NONCOHERENT
  riscv: dts: thead: set dma-noncoherent to soc bus
  arm64: dts: rockchip: Fix i2s0 pin conflict on ROCK Pi 4 boards
  arm64: dts: rockchip: Add i2s0-2ch-bus-bclk-off pins to RK3399
  clk: ti: Fix missing omap5 mcbsp functional clock and aliases
  clk: ti: Fix missing omap4 mcbsp functional clock and aliases
  ARM: OMAP1: ams-delta: Fix MODEM initialization failure
  soc: renesas: Make ARCH_R9A07G043 depend on required options
  riscv: dts: starfive: visionfive 2: correct spi's ss pin
  firmware/imx-dsp: Fix use_after_free in imx_dsp_setup_channels()
  ARM: OMAP: timer32K: fix all kernel-doc warnings
  ARM: omap2: fix a debug printk
  ARM: dts: rockchip: Fix timer clocks for RK3128
  ARM: dts: rockchip: Add missing quirk for RK3128's dma engine
  ARM: dts: rockchip: Add missing arm timer interrupt for RK3128
  ARM: dts: rockchip: Fix i2c0 register address for RK3128
  arm64: dts: rockchip: set codec system-clock-fixed on px30-ringneck-haikou
  arm64: dts: rockchip: use codec as clock master on px30-ringneck-haikou
  ...

Merge tag 'net-6.6-rc8' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
 "Including fixes from WiFi and netfilter.

  Most regressions addressed here come from quite old versions, with the
  exceptions of the iavf one and the WiFi fixes. No known outstanding
  reports or investigation.

  Fixes to fixes:

   - eth: iavf: in iavf_down, disable queues when removing the driver

  Previous releases - regressions:

   - sched: act_ct: additional checks for outdated flows

   - tcp: do not leave an empty skb in write queue

   - tcp: fix wrong RTO timeout when received SACK reneging

   - wifi: cfg80211: pass correct pointer to rdev_inform_bss()

   - eth: i40e: sync next_to_clean and next_to_process for programming
     status desc

   - eth: iavf: initialize waitqueues before starting watchdog_task

  Previous releases - always broken:

   - eth: r8169: fix data-races

   - eth: igb: fix potential memory leak in igb_add_ethtool_nfc_entry

   - eth: r8152: avoid writing garbage to the adapter's registers

   - eth: gtp: fix fragmentation needed check with gso"

* tag 'net-6.6-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (43 commits)
  iavf: in iavf_down, disable queues when removing the driver
  vsock/virtio: initialize the_virtio_vsock before using VQs
  net: ipv6: fix typo in comments
  net: ipv4: fix typo in comments
  net/sched: act_ct: additional checks for outdated flows
  netfilter: flowtable: GC pushes back packets to classic path
  i40e: Fix wrong check for I40E_TXR_FLAGS_WB_ON_ITR
  gtp: fix fragmentation needed check with gso
  gtp: uapi: fix GTPA_MAX
  Fix NULL pointer dereference in cn_filter()
  sfc: cleanup and reduce netlink error messages
  net/handshake: fix file ref count in handshake_nl_accept_doit()
  wifi: mac80211: don't drop all unprotected public action frames
  wifi: cfg80211: fix assoc response warning on failed links
  wifi: cfg80211: pass correct pointer to rdev_inform_bss()
  isdn: mISDN: hfcsusb: Spelling fix in comment
  tcp: fix wrong RTO timeout when received SACK reneging
  r8152: Block future register access if register access fails
  r8152: Rename RTL8152_UNPLUG to RTL8152_INACCESSIBLE
  r8152: Check for unplug in r8153b_ups_en() / r8153c_ups_en()
  ...

Merge tag 'renesas-fixes-for-v6.6-tag3' of git://git./linux/kernel/git/geert/renesas-devel into arm/fixes

Renesas fixes for v6.6 (take three)

  - Sort out a few Kconfig dependency issues for the rich set of RISC-V
    non-coherent DMA support.

* tag 'renesas-fixes-for-v6.6-tag3' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  soc: renesas: ARCH_R9A07G043 depends on !RISCV_ISA_ZICBOM
  riscv: only select DMA_DIRECT_REMAP from RISCV_ISA_ZICBOM and ERRATA_THEAD_PBMT
  riscv: RISCV_NONSTANDARD_CACHE_OPS shouldn't depend on RISCV_DMA_NONCOHERENT

Link: https://lore.kernel.org/r/cover.1698312384.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

soc: renesas: ARCH_R9A07G043 depends on !RISCV_ISA_ZICBOM

ARCH_R9A07G043 has its own non-standard global pool based DMA coherent
allocator, which conflicts with the remap based RISCV_ISA_ZICBOM version.
Add a proper dependency.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231018052654.50074-4-hch@lst.de
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

riscv: only select DMA_DIRECT_REMAP from RISCV_ISA_ZICBOM and ERRATA_THEAD_PBMT

RISCV_DMA_NONCOHERENT is also used for whacky non-standard
non-coherent ops that use different hooks in dma-direct.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20231018052654.50074-3-hch@lst.de
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

riscv: RISCV_NONSTANDARD_CACHE_OPS shouldn't depend on RISCV_DMA_NONCOHERENT

RISCV_NONSTANDARD_CACHE_OPS is also used for the pmem cache maintenance
helpers, which are built into the kernel unconditionally.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231018052654.50074-2-hch@lst.de
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

accel/ivpu/37xx: Fix missing VPUIP interrupts

Move sequence of masking and unmasking global interrupts from buttress
interrupt handler to generic one that handles both VPUIP and BTRS
interrupts. Unmasking global interrupts will re-trigger MSI for any
pending interrupts.

Lack of this sequence will cause the driver to miss any
VPUIP interrupt that comes after reading VPU_37XX_HOST_SS_ICB_STATUS_0
and before clearing all active interrupt sources.

Fixes: 35b137630f08 ("accel/ivpu: Introduce a new DRM driver for Intel VPU")
Cc: stable@vger.kernel.org
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024161952.759914-1-stanislaw.gruszka@linux.intel.com

iavf: in iavf_down, disable queues when removing the driver

In iavf_down, we're skipping the scheduling of certain operations if
the driver is being removed. However, the IAVF_FLAG_AQ_DISABLE_QUEUES
request must not be skipped in this case, because iavf_close waits
for the transition to the __IAVF_DOWN state, which happens in
iavf_virtchnl_completion after the queues are released.

Without this fix, "rmmod iavf" takes half a second per interface that's
up and prints the "Device resources not yet released" warning.

Fixes: c8de44b577eb ("iavf: do not process adminq tasks when __IAVF_IN_REMOVE_TASK is set")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Tested-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231025183213.874283-1-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'nf-23-10-25' of git://git./linux/kernel/git/netfilter/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

This patch contains two late Netfilter's flowtable fixes for net:

1) Flowtable GC pushes back packets to classic path in every GC run,
   ie. every second. This is because NF_FLOW_HW_ESTABLISHED is only
   used by sched/act_ct (never set) and IPS_SEEN_REPLY might be unset
   by the time the flow is offloaded (this status bit is only reliable
   in the sched/act_ct datapath).

2) sched/act_ct logic to push back packets to classic path to reevaluate
   if UDP flow is unidirectional only applies if IPS_HW_OFFLOAD_BIT is
   set on and no hardware offload request is pending to be handled.
   From Vlad Buslov.

These two patches fixes two problems that were introduced in the
previous 6.5 development cycle.

* tag 'nf-23-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  net/sched: act_ct: additional checks for outdated flows
  netfilter: flowtable: GC pushes back packets to classic path
====================

Link: https://lore.kernel.org/r/20231025100819.2664-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

vsock/virtio: initialize the_virtio_vsock before using VQs

Once VQs are filled with empty buffers and we kick the host, it can send
connection requests. If the_virtio_vsock is not initialized before,
replies are silently dropped and do not reach the host.

virtio_transport_send_pkt() can queue packets once the_virtio_vsock is
set, but they won't be processed until vsock->tx_run is set to true. We
queue vsock->send_pkt_work when initialization finishes to send those
packets queued earlier.

Fixes: 0deab087b16a ("vsock/virtio: use RCU to avoid use-after-free on the_virtio_vsock")
Signed-off-by: Alexandru Matei <alexandru.matei@uipath.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20231024191742.14259-1-alexandru.matei@uipath.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

irqchip/gic-v3-its: Don't override quirk settings with default values

When splitting the allocation of the ITS node from its configuration,
some of the default settings were kept in the latter instead of
being moved to the former.

This has the side effect of negating some of the quirk detections that
have happened in between, amongst which the dreaded Synquacer hack
(that also affect Dominic's TI platform).

Move the initialisation of these fields early, so that they can again be
overriden by the Synquacer quirk.

Fixes: 9585a495ac93 ("irqchip/gic-v3-its: Split allocation from initialisation of its_node")
Reported by: Dominic Rath <dominic.rath@ibv-augsburg.net>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Dominic Rath <dominic.rath@ibv-augsburg.net>
Link: https://lore.kernel.org/r/20231024084831.GA3788@JADEVM-DRA
Link: https://lore.kernel.org/r/20231024143431.2144579-1-maz@kernel.org

Merge tag 'acpi-6.6-rc8' of git://git./linux/kernel/git/rafael/linux-pm

Pull ACPI fix from Rafael Wysocki:
 "Unbreak the ACPI NFIT driver after a recent change that inadvertently
  altered its behavior (Xiang Chen)"

* tag 'acpi-6.6-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: NFIT: Install Notify() handler before getting NFIT table

swiotlb: do not try to allocate a TLB bigger than MAX_ORDER pages

When allocating a new pool at runtime, reduce the number of slabs so
that the allocation order is at most MAX_ORDER.  This avoids a kernel
warning in __alloc_pages().

The warning is relatively benign, because the pool size is subsequently
reduced when allocation fails, but it is silly to start with a request
that is known to fail, especially since this is the default behavior if
the kernel is built with CONFIG_SWIOTLB_DYNAMIC=y and booted without any
swiotlb= parameter.

Reported-by: Ben Greear <greearb@candelatech.com>
Closes: https://lore.kernel.org/netdev/4f173dd2-324a-0240-ff8d-abf5c191be18@candelatech.com/
Fixes: 1aaa736815eb ("swiotlb: allocate a new memory pool when existing pools are full")
Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

io_uring/rw: disable IOCB_DIO_CALLER_COMP

If an application does O_DIRECT writes with io_uring and the file system
supports IOCB_DIO_CALLER_COMP, then completions of the dio write side is
done from the task_work that will post the completion event for said
write as well.

Whenever a dio write is done against a file, the inode i_dio_count is
elevated. This enables other callers to use inode_dio_wait() to wait for
previous writes to complete. If we defer the full dio completion to
task_work, we are dependent on that task_work being run before the
inode i_dio_count can be decremented.

If the same task that issues io_uring dio writes with
IOCB_DIO_CALLER_COMP performs a synchronous system call that calls
inode_dio_wait(), then we can deadlock as we're blocked sleeping on
the event to become true, but not processing the completions that will
result in the inode i_dio_count being decremented.

Until we can guarantee that this is the case, then disable the deferred
caller completions.

Fixes: 099ada2c8726 ("io_uring/rw: add write support for IOCB_DIO_CALLER_COMP")
Reported-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drm/amd: Disable ASPM for VI w/ all Intel systems

Originally we were quirking ASPM disabled specifically for VI when
used with Alder Lake, but it appears to have problems with Rocket
Lake as well.

Like we've done in the case of dpm for newer platforms, disable
ASPM for all Intel systems.

Cc: stable@vger.kernel.org # 5.15+
Fixes: 0064b0ce85bb ("drm/amd/pm: enable ASPM by default")
Reported-and-tested-by: Paolo Gentili <paolo.gentili@canonical.com>
Closes: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2036742
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

io_uring/fdinfo: lock SQ thread while retrieving thread cpu/pid

We could race with SQ thread exit, and if we do, we'll hit a NULL pointer
dereference when the thread is cleared. Grab the SQPOLL data lock before
attempting to get the task cpu and pid for fdinfo, this ensures we have a
stable view of it.

Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218032
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>