Lennart Poettering [Tue, 17 Jun 2014 22:07:56 +0000 (00:07 +0200)]
cryptsetup: introduce new cryptsetup-pre.traget unit so that services can make sure they are started before and stopped after any LUKS setup
https://bugzilla.redhat.com/show_bug.cgi?id=1097938
Lennart Poettering [Tue, 17 Jun 2014 22:02:08 +0000 (00:02 +0200)]
tmpfiles: create directories already with the right label, instead of creating them first, and relabeling them afterwards
Lennart Poettering [Tue, 17 Jun 2014 22:01:39 +0000 (00:01 +0200)]
tmpfiles: w lines should allow following symlinks
Lennart Poettering [Tue, 17 Jun 2014 22:01:07 +0000 (00:01 +0200)]
update TODO
Lennart Poettering [Tue, 17 Jun 2014 21:51:21 +0000 (23:51 +0200)]
namespace: properly label device nodes we create
https://bugzilla.redhat.com/show_bug.cgi?id=1081429
Lennart Poettering [Tue, 17 Jun 2014 21:50:22 +0000 (23:50 +0200)]
tmpfiles: add "+" modifier support to b, c, p lines in addition to L
Zbigniew Jędrzejewski-Szmek [Sat, 7 Jun 2014 20:37:50 +0000 (16:37 -0400)]
man: fix typo
Ronny Chevalier [Tue, 17 Jun 2014 17:26:14 +0000 (19:26 +0200)]
build-sys: add missing backslash
Tom Gundersen [Tue, 17 Jun 2014 17:42:30 +0000 (19:42 +0200)]
networkd: veth - fix parsing verification
Tom Gundersen [Tue, 17 Jun 2014 17:40:40 +0000 (19:40 +0200)]
networkd: vxlan - fix parsing verification
Tom Gundersen [Tue, 17 Jun 2014 17:40:12 +0000 (19:40 +0200)]
networkd: veth - fix memleak
Thomas Hindoe Paaboel Andersen [Tue, 17 Jun 2014 19:22:01 +0000 (21:22 +0200)]
install: remove unused variable
Lennart Poettering [Tue, 17 Jun 2014 10:58:32 +0000 (12:58 +0200)]
tmpfiles: remove line for automatic clean-ups for /var/cache/man/
Management of /var/cache/man should move to the distribution package
owning the directory (for example, man-db). As man pages are a
non-essential part of the system and unnecessary for minimal setups,
there's no point in having systemd ship these lines.
Distribution packages should make sure the appropriate package for their
distribution adopts this line. Ideally, the line is adopted by the
upstream package.
For Fedora I have filed this bug:
https://bugzilla.redhat.com/show_bug.cgi?id=1110274
Frederic Crozat [Mon, 16 Jun 2014 16:49:12 +0000 (18:49 +0200)]
bootchart: set white background
In programs like eog and gimp the transparant background did not
look very good.
Similar fix from the one done in systemd-analyze (
418e3750)
Tom Gundersen [Tue, 17 Jun 2014 06:54:44 +0000 (08:54 +0200)]
networkd: link - fix carrier check on new link
We were comparing against our own internal enum rather than the kernel exposed one.
Found by Thomas Ritter.
Tom Gundersen [Mon, 16 Jun 2014 13:24:28 +0000 (15:24 +0200)]
sd-dhcp: checksum - make endianess-neutral
For efficiency, we group bytes together before adding them up. This
is guaranteed to always work (regardless of the byte order) as long
as the i-th byte in each group lign up with the i-th byte in each
other group.
On big-endian machines this broke when handling the trailing few bytes
which did not make up a full group of 4 bytes. This patch fixes the
problem by explicitly creating a 4 byte zero-padded group out of the
trailing bytes.
Reported and tested by Thomas Ritter <th.ritter@gmx.at>.
Dave Reisner [Tue, 17 Jun 2014 03:29:27 +0000 (23:29 -0400)]
systemctl: reverse order of args when verbosely creating symlinks
This was backwards. The symlink itself points to the source unit, not
the other way around.
Kay Sievers [Tue, 17 Jun 2014 01:34:09 +0000 (03:34 +0200)]
timesyncd: do not start in virtualized environments
Lennart Poettering [Tue, 17 Jun 2014 01:30:11 +0000 (03:30 +0200)]
update TODO
Lennart Poettering [Tue, 17 Jun 2014 01:25:34 +0000 (03:25 +0200)]
core: populate unit file set with preset data if we boot with empty /etc
Lennart Poettering [Tue, 17 Jun 2014 01:25:02 +0000 (03:25 +0200)]
machine-id-setup: allow passing NULL as function argument, for simplicity
Lennart Poettering [Tue, 17 Jun 2014 01:23:23 +0000 (03:23 +0200)]
kmod: conditionalize kmod setup on CAP_SYS_MODULE, not whether we run in a container
It's generally preferrable to conditionalize on the actual ability to do
something then the context we run in.
Lennart Poettering [Tue, 17 Jun 2014 01:09:27 +0000 (03:09 +0200)]
build-sys: touch /usr on "make install"
this way, the "make install" will be detected as offline update on next
boot.
Lennart Poettering [Tue, 17 Jun 2014 00:18:33 +0000 (02:18 +0200)]
units: minor cleanups
Lennart Poettering [Tue, 17 Jun 2014 00:15:03 +0000 (02:15 +0200)]
install: improve paths we show the user when enabling/disabling
Lennart Poettering [Tue, 17 Jun 2014 00:13:08 +0000 (02:13 +0200)]
networkd: don't pull in systemd-networkd-wait-online service from systemd-networkd when enabling
networkd-wait-online should never exist in the default transaction,
unless explicitly enable or pulled in via things like NFS. However, just
enabling networkd shouldn't enable networkd-wait-online, since it's
common to use the former without the latter.
Lennart Poettering [Mon, 16 Jun 2014 23:56:44 +0000 (01:56 +0200)]
conf-files: fix when for --root= logic
This is based on parts of similar patches from Michael Marineau and
Lukas Nykrin, but simply uses strappenda3().
Lennart Poettering [Mon, 16 Jun 2014 23:38:07 +0000 (01:38 +0200)]
systemctl: output human readable strings in "systemctl enable" and "systemctl disable"
Lennart Poettering [Mon, 16 Jun 2014 23:37:54 +0000 (01:37 +0200)]
install: simplify symlink --root= logic
Lennart Poettering [Mon, 16 Jun 2014 23:22:55 +0000 (01:22 +0200)]
install: "systemctl enable" should be a nop for template units lacking a DefaultInstance= setting
Lennart Poettering [Mon, 16 Jun 2014 23:14:44 +0000 (01:14 +0200)]
preset: ship a minimal preset file upstream
This is useful so that distros have something to base their own policy
of. It also useful to make sure that minimal installs always get useful
configuration in place.
Lennart Poettering [Mon, 16 Jun 2014 23:05:39 +0000 (01:05 +0200)]
log: don't downgrade log level in non-PID 1 if "quiet" is passed on kernel cmdline
"debug" should apply to all tools, but "quiet" only to PID1.
Lennart Poettering [Mon, 16 Jun 2014 22:53:49 +0000 (00:53 +0200)]
install: make sure that --root= mode doesn't make us consider all units outside of search path
Lennart Poettering [Mon, 16 Jun 2014 22:33:39 +0000 (00:33 +0200)]
install: make sure "systemctl disable foobar@.service" actually removes all instances
Lennart Poettering [Mon, 16 Jun 2014 22:15:31 +0000 (00:15 +0200)]
install: introduce new DefaultInstance= field for [Install] sections
The DefaultInstance= name is used when enabling template units when only
specifying the template name, but no instance.
Add DefaultInstance=tty1 to getty@.service, so that when the template
itself is enabled an instance for tty1 is created.
This is useful so that we "systemctl preset-all" can work properly,
because we can operate on getty@.service after finding it, and the right
instance is created.
Lennart Poettering [Mon, 16 Jun 2014 22:13:48 +0000 (00:13 +0200)]
install: when looking for a unit file for enabling, search for templates only after traversing all search directories
Let's always make sure to look in all search directories for the full
unit names first, before looking for templates for them.
Lennart Poettering [Mon, 16 Jun 2014 22:11:47 +0000 (00:11 +0200)]
install: use symlink_atomic() instead of unlink()+symlink() when force creating a symlink
Lennart Poettering [Mon, 16 Jun 2014 22:10:54 +0000 (00:10 +0200)]
install: various modernizations
Lennart Poettering [Mon, 16 Jun 2014 18:33:29 +0000 (20:33 +0200)]
install: teach preset query logic --root= support
Lennart Poettering [Mon, 16 Jun 2014 17:49:31 +0000 (19:49 +0200)]
install: beef up preset logic to limit to only enable or only disable, and do all-unit preset operations
The new "systemctl preset-all" command may now be used to put all
installed units back into the enable/disable state the vendor/admin
encoded in preset files.
Also, introduce "systemctl --preset-mode=enable-only" and "systemctl
--preset-mode=disable-only" to only apply the enable or only the disable
operations of a "systemctl preset" or "systemctl preset-all" operation.
"systemctl preset-all" implements this RFE:
https://bugzilla.redhat.com/show_bug.cgi?id=630174
Lennart Poettering [Mon, 16 Jun 2014 17:48:31 +0000 (19:48 +0200)]
install: simplify and clarify disabling logic for instanced units
Lennart Poettering [Mon, 16 Jun 2014 15:19:30 +0000 (17:19 +0200)]
install: various modernizations
Lennart Poettering [Mon, 16 Jun 2014 15:04:49 +0000 (17:04 +0200)]
update TODO
Lennart Poettering [Mon, 16 Jun 2014 15:04:30 +0000 (17:04 +0200)]
unit-name: various modernizations
Lennart Poettering [Mon, 16 Jun 2014 15:01:26 +0000 (17:01 +0200)]
unit-name: fix detection of unit templates/instances
We need to check for the last dot, not the first one in a unit name, for
the suffix. Correct that.
Thomas Hindoe Paaboel Andersen [Mon, 16 Jun 2014 21:49:10 +0000 (23:49 +0200)]
journal-remote: fix memleak
Ronny Chevalier [Sun, 15 Jun 2014 20:47:49 +0000 (22:47 +0200)]
tests: unlink temp file used in test
Ronny Chevalier [Sun, 15 Jun 2014 20:46:05 +0000 (22:46 +0200)]
tests: add tests to test-hashmap
add tests for:
- hashmap_remove_and_put
- hashmap_first_key
- hashmap_last
- hashmap_steal_first_key
- hashmap_clear_free_free
Ronny Chevalier [Sat, 14 Jun 2014 20:10:45 +0000 (22:10 +0200)]
tests: add test-fdset
Ronny Chevalier [Sat, 14 Jun 2014 20:10:44 +0000 (22:10 +0200)]
tests: add test-socket-util
Susant Sahani [Mon, 16 Jun 2014 06:24:34 +0000 (11:54 +0530)]
networkd: unref tunnel
Unref tunnel while shutting down
Susant Sahani [Mon, 16 Jun 2014 06:24:33 +0000 (11:54 +0530)]
networkd: introduce vxlan
This patch enables netwokd to create vxlan
Changes:
Added:
1. File networkd networkd-vxlan.c
2. to netdev
bool learning
struct in_addr group
uint64_t vxlanid;
3. VXLAN subsection and config
parameters
Susant Sahani [Mon, 16 Jun 2014 06:24:32 +0000 (11:54 +0530)]
networkd: rename netdev variables
Rename the netdev variables. Remove tunnel_
so that it can be reused .
Susant Sahani [Mon, 16 Jun 2014 06:24:31 +0000 (11:54 +0530)]
sd-rtnl: add support for vxlan rtnl attributes
This patch adds vxlan rtnl attributes to sd-rtnl
Kay Sievers [Mon, 16 Jun 2014 14:03:30 +0000 (16:03 +0200)]
bus-proxy: policy - ignore unsupported tags and attributes
Ruediger Oertel [Fri, 13 Jun 2014 14:41:06 +0000 (16:41 +0200)]
Reset signal-mask on re-exec to init=..
Process 1 (aka init) needs to be started with an empty signal mask.
That includes the process 1 that's started after the initrd is finished.
When the initrd is using systemd (as it does with dracut based initrds)
then it is systemd that calls the real init. Normally this is systemd
again, except when the user uses for instance "init=/bin/bash" on the
kernel command line.
David Herrmann [Fri, 13 Jun 2014 16:43:22 +0000 (18:43 +0200)]
util: add realloc_multiply() helper
This is similar to malloc_multiply() and friends. It is realloc() with a
multiplication-overflow check.
David Herrmann [Fri, 13 Jun 2014 16:38:15 +0000 (18:38 +0200)]
util: fix multiply-alloc helpers with size==0
Passing 0 to malloc() is not required to return NULL. Therefore, don't
bail out if "b" is 0. This is not of importance to the existing helpers,
but the upcoming realloc_multiply() requires this. To keep consistence, we
keep the same behavior for the other helpers.
David Herrmann [Thu, 12 Jun 2014 15:54:48 +0000 (17:54 +0200)]
macro: add DISABLE_WARNING_SHADOW
As it turns out, we cannot use _Pragma in compound-statements. Therefore,
constructs like MIN(MAX(a, b), x) will warn due to shadowed variable
declarations. The DISABLE_WARNING_SHADOW macro can be used to suppress
these.
Note that using UNIQUE(_var) does not work either as GCC uses the last
line of a macro-expansion for __LINE__, therefore, still causing both
macros to have the same variables. We could use different variable-names
for MIN and MAX, but that just hides the problem and still fails for
MIN(something(MIN(a, b)), c).
The only working solution is to use __COUNTER__ and pass it pre-evaluated
as extra argument to a macro to use as name-prefix. This, however, makes
all these macros much more complicated so I'll go with manual
DISABLE_WARNING_SHADOW so far.
Lennart Poettering [Mon, 16 Jun 2014 11:21:07 +0000 (13:21 +0200)]
tmpfiles: add new "L+" command as stronger version of "L", that removes the destination before creating a symlink
Also, make use of this for mtab as long as mount insists on creating it
even if we invoke it with "-n".
Lennart Poettering [Mon, 16 Jun 2014 11:20:38 +0000 (13:20 +0200)]
tmpfiles: set up selinux label proeprly when creating fifos
Lennart Poettering [Mon, 16 Jun 2014 10:29:51 +0000 (12:29 +0200)]
update TODO
Lennart Poettering [Mon, 16 Jun 2014 10:29:35 +0000 (12:29 +0200)]
build-sys: add missing Makefile link
Lennart Poettering [Mon, 16 Jun 2014 10:28:44 +0000 (12:28 +0200)]
units: add a service to invoke ldconfig on system updates at boot
Lennart Poettering [Mon, 16 Jun 2014 10:25:49 +0000 (12:25 +0200)]
units: drop RefuseManualStart= from a couple of update services
The only update service we really need to guard like this is
systemd-tmpfiles-setup.service since if invoked manually might create
/var/run/nologin and thus blocking the user from login. The other
services are pretty much idempotent and don't suffer by this problem,
hence let's simplify them.
Lennart Poettering [Sun, 15 Jun 2014 23:03:38 +0000 (01:03 +0200)]
update TODO
Lennart Poettering [Sun, 15 Jun 2014 23:02:27 +0000 (01:02 +0200)]
mount: add new SloppyOptions= setting for mount units, mapping to mount(8)'s "-s" switch
Lennart Poettering [Sun, 15 Jun 2014 22:53:02 +0000 (00:53 +0200)]
mount: tell /bin/mount to never touch /etc/mtab
/etc/mtab should die die die. It's sad enough util-linux still contains
support for it, but we don't have to partake in that charade, so let's
turn this off.
This is in-line with the fact that since years we already have been
"tainting" systemd if we detect /etc/mtab not being a symlink...
Of course, util-linux is currently broken, and still touches /etc/mtab,
weven if we pass "--no-mtab" to it:
https://bugzilla.redhat.com/show_bug.cgi?id=1109367
But hey, let's hope that gets fixed quickly, even if total removal of
/etc/mtab support from util-linux might not happen so quickly...
Lennart Poettering [Sun, 15 Jun 2014 21:42:53 +0000 (23:42 +0200)]
units: bring systemd-tmpfiles-setup-dev.service closer to systemd-tmpfiles-setup.service
Among other things, order both services relative to
systemd-sysusers.service in the same direction.
Lennart Poettering [Sun, 15 Jun 2014 21:39:00 +0000 (23:39 +0200)]
tmpfiles: create /etc/resolv.conf as link to networkd's version, if it doesn't exist
If /etc/resolv.conf doesn't exist it's better than nothing to make it
point to networkd's version.
Kay Sievers [Sat, 14 Jun 2014 20:16:46 +0000 (22:16 +0200)]
sysusers: order before tmpfiles which need the ids
Tom Gundersen [Sat, 14 Jun 2014 16:52:46 +0000 (18:52 +0200)]
networkd: link - flush all pending NEWLINK events before trying to match
We could still have an old interface name and/or mac address when libudev
tells us that the device is initialized, as the up-to-date info could still
be on its way from the kernel.
Tom Gundersen [Sat, 14 Jun 2014 13:48:16 +0000 (15:48 +0200)]
Revert "Revert "networkd: netdev - set predictable mac address when creating netdev""
This reverts (and rewrites) commit
7d95c772cba1836545459760273b13f2e01dd2a8.
The issue blocking this feature has now been fixed in the kernel, and backported
to the various stable kernels.
Our netdevs will now have stable MAC addresses, even if one is not specified.
Tom Gundersen [Sat, 14 Jun 2014 13:38:35 +0000 (15:38 +0200)]
networkd: netdev - allow setting MACAddress in .netdev files
It may sometimes be necessary to specify the MAC address of a netdev.
Let us set the correct one from the get-go, rather than having the
kernel generate a random one, and then change it after.
Tom Gundersen [Sat, 14 Jun 2014 13:03:56 +0000 (15:03 +0200)]
networkd: add assert
It should not be possible to have a DHCP lease on a link without also having
an associated network. Add assert() to avoid compiler warnings.
Reported by Thomas H. P. Andersen
Thomas Hindoe Paaboel Andersen [Fri, 13 Jun 2014 20:00:55 +0000 (22:00 +0200)]
networkd: link - check returned value from set_lease_pool
Colin Ian King [Thu, 12 Jun 2014 15:41:41 +0000 (16:41 +0100)]
Fix spelling mistake, scirpt --> script
Lennart Poettering [Fri, 13 Jun 2014 18:04:31 +0000 (20:04 +0200)]
core: don't complain at early boot if /etc/mtab is not the right symlink
When we boot up with an empty /etc it's ok if the symlink doesn't exist.
We will create it later with tmpfiles.
Lennart Poettering [Fri, 13 Jun 2014 17:56:12 +0000 (19:56 +0200)]
tmpfiles: always use relative symlinks from tmpfiles snippets
Lennart Poettering [Fri, 13 Jun 2014 17:45:52 +0000 (19:45 +0200)]
os-release: define /usr/lib/os-release as fallback for /etc/os-release
The file should have been in /usr/lib/ in the first place, since it
describes the OS container in /usr (and not the configuration in /etc),
hence, let's support os-release files in /usr/lib as fallback if no
version in /etc exists, following the usual override logic.
A prior commit already enabled tmpfiles to create /etc/os-release as a
symlink to /usr/lib/os-release should it be missing, thus providing nice
compatibility with applications only checking in /etc.
While it's probably a good idea if all apps check both locations via a
fallback logic, it is only necessary in the early boot process, as long
as the /etc/os-release symlink has not been restored, in case we boot
with an empty /etc.
Lennart Poettering [Fri, 13 Jun 2014 17:24:11 +0000 (19:24 +0200)]
sysusers: always treat ENOENT as entry-not-found when doing NSS calls
For most NSS calls it is documented that they return NULL + errno=0 when
an entry is not found. However, in reality it appears to be common to
return NULL + errno=ENOENT, instead. Handle that correctly, and don't
consider ENOENT a systematic error.
Lennart Poettering [Fri, 13 Jun 2014 17:18:55 +0000 (19:18 +0200)]
rpm: add RPM macros to apply sysusers, sysctl, and binfmt drop-ins
With this in place RPMs can make sure that whatever they drop in is
immeidately applied, and not delayed until next reboot.
This also moves systemd-sysusers back to /usr/bin, since hardcoding the
path to /usr/lib in the macros would mean compatibility breaks in
future, should we turn sysusers into a command that is actually OK for
people to call directly. And given that that is quite likely to happen
(since it is useful to prepare images with its --root= switch), let's
just prepare for it.
Lennart Poettering [Fri, 13 Jun 2014 17:05:22 +0000 (19:05 +0200)]
rpm: don't hardcode the binary paths in the macros, rely on $PATH
this gives us a little bit more freedom to move things around later on,
as we don't hardcode the systemd paths in old RPMs that shall work with
new systemds.
Tom Gundersen [Fri, 13 Jun 2014 17:11:31 +0000 (19:11 +0200)]
sd-dhcp-server: test - skip when lacking perms
Andreas Henriksson [Fri, 13 Jun 2014 16:48:18 +0000 (18:48 +0200)]
install: fix invalid free() in unit_file_mask()
int unit_file_mask(...) in ./src/shared/install.c calls
get_config_path(...) which can in 4 error cases return without setting
"ret", and thus "prefix" can be uninitialized when unit_file_mask(...)
finishes (which it does directly after the error is returned from
get_config_path(...)).
Andreas Henriksson [Fri, 13 Jun 2014 16:48:21 +0000 (18:48 +0200)]
udev: fix invalid free() in enable_name_policy()
static bool enable_name_policy(...) in ./src/udev/net/link-config.c
calls proc_cmdline(...) to get "line" initialized, but
proc_cmdline(...) does not guarantee that atleast when both
conditions (detect_container(NULL) > 0) and
read_full_file(...) returned < 0.
Andreas Henriksson [Fri, 13 Jun 2014 16:48:19 +0000 (18:48 +0200)]
core: fix invalid free() in killall()
static int killall(....) in ./src/core/killall.c tries to get "s"
initialized by calling get_process_comm(...) which calls
read_one_line_file(...) which if it fails will mean it is left
uninitialized.
It is then used in argument to strna(s) call where it is
dereferenced(!), in addition to nothing else initializing it before
the scope it is in finishes.
Andreas Henriksson [Fri, 13 Jun 2014 16:48:20 +0000 (18:48 +0200)]
sd-dhcp-client: fix invalid free() in client_send_request()
static int client_send_request(...) in
./src/libsystemd-network/sd-dhcp-client.c tries to initialize
"request" by calling client_message_init(...), which has atleast
5 error cases where it can return without that happening.
This leads to the function finishing without "request" being initialized.
Tom Gundersen [Fri, 13 Jun 2014 16:34:34 +0000 (18:34 +0200)]
networkd: link - left-align debug messages
Still add some whitespace betwen ifname and the message to get the
messages aligned (as I find it easier to spot specific messages this way).
Tom Gundersen [Wed, 5 Mar 2014 07:13:30 +0000 (08:13 +0100)]
networkd: add dhcp server support
When enabled in [Network] it will set up a dhcp server on the interface, listening
on one of its statically configured IPv4 addresses and with a fixed size pool of
leases determined from it.
Example:
[Match]
Name=ve-arch-tree
[Network]
Address=192.168.12.5/24
DHCPServer=yes
[Route]
Gateway=192.168.12.5
Destination=192.168.12.0/24
In this case we will configure ve-arch-tree with the address 192.168.12.5 and
hand out addresses in the range 192.168.12.6 - 192.168.12.38.
In the future, we should (as suggested by Lennart) introduce a syntax to pick the
server address automatically.
Tom Gundersen [Mon, 26 May 2014 13:18:47 +0000 (15:18 +0200)]
sd-dhcp-server: add RELEASE support
Tom Gundersen [Mon, 26 May 2014 13:06:42 +0000 (15:06 +0200)]
sd-dhcp-server: add dummy DECLINE support
Tom Gundersen [Sun, 25 May 2014 20:07:53 +0000 (22:07 +0200)]
sd-dhcp-server: track bound leases
Make sure we don't hand out the same IP twice. We still don't
handle lease expiry.
Tom Gundersen [Sun, 25 May 2014 19:47:38 +0000 (21:47 +0200)]
sd-dhcp-server: add support for clients requesting lease lifetime
Tom Gundersen [Sun, 25 May 2014 18:39:02 +0000 (20:39 +0200)]
sd-dhcp-server: add basic NAK support
Tom Gundersen [Sun, 25 May 2014 16:28:03 +0000 (18:28 +0200)]
sd-dhcp-server: add basic REQUEST/ACK support
Tom Gundersen [Sun, 25 May 2014 15:31:17 +0000 (17:31 +0200)]
sd-dhcp-server: add basic DISCOVER/OFFER support
Tom Gundersen [Sun, 25 May 2014 15:20:57 +0000 (17:20 +0200)]
sd-dhcp-server: add support for sending messages
Tom Gundersen [Sat, 24 May 2014 22:29:13 +0000 (00:29 +0200)]
sd-dhcp-server: add support for setting the server address
Tom Gundersen [Sat, 24 May 2014 21:03:49 +0000 (23:03 +0200)]
sd-dhcp-server: bind to raw socket for sending
We would like to use the UDP socket, but we cannot as we need to specify
the MAC address manually.