smb3: don't request leases in symlink creation and query

commit 22783155f4bf956c346a81624ec9258930a6fe06 upstream.

Fixes problem pointed out by Pavel in discussions about commit
729c0c9dd55204f0c9a823ac8a7bfa83d36c7e78

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org> # 3.18.x+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

smb3: Do not send SMB3 SET_INFO if nothing changed

commit fd09b7d3b352105f08b8e02f7afecf7e816380ef upstream.

An earlier commit had a typo which prevented the
optimization from working:

commit 18dd8e1a65dd ("Do not send SMB3 SET_INFO request if nothing is changing")

Thank you to Metze for noticing this.  Also clear a
reserved field in the FILE_BASIC_INFO struct we send
that should be zero (all the other fields in that
struct were set or cleared explicitly already in
cifs_set_file_info).

Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org> # 4.9.x+
Reported-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: check kmalloc before use

commit 126c97f4d0d1b5b956e8b0740c81a2b2a2ae548c upstream.

The kmalloc was not being checked - if it fails issue a warning
and return -ENOMEM to the caller.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Fixes: b8da344b74c8 ("cifs: dynamic allocation of ntlmssp blob")
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
cc: Stable <stable@vger.kernel.org>`
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: add missing debug entries for kconfig options

commit 950132afd59385caf6e2b84e5235d069fa10681d upstream.

/proc/fs/cifs/DebugData displays the features (Kconfig options)
used to build cifs.ko but it was missing some, and needed comma
separator.  These can be useful in debugging certain problems
so we know which optional features were enabled in the user's build.
Also clarify them, by making them more closely match the
corresponding CONFIG_CIFS_* parm.

Old format:
Features: dfs fscache posix spnego xattr acl

New format:
Features: DFS,FSCACHE,SMB_DIRECT,STATS,DEBUG2,ALLOW_INSECURE_LEGACY,CIFS_POSIX,UPCALL(SPNEGO),XATTR,ACL

Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/memory.c: check return value of ioremap_prot

[ Upstream commit 24eee1e4c47977bdfb71d6f15f6011e7b6188d04 ]

ioremap_prot() can return NULL which could lead to an oops.

Link: http://lkml.kernel.org/r/1533195441-58594-1-git-send-email-chenjie6@huawei.com
Signed-off-by: chen jie <chenjie6@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: chenjie <chenjie6@huawei.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: vmw_pvscsi: Return DID_RESET for status SAM_STAT_COMMAND_TERMINATED

[ Upstream commit e95153b64d03c2b6e8d62e51bdcc33fcad6e0856 ]

Commands that are reset are returned with status
SAM_STAT_COMMAND_TERMINATED. PVSCSI currently returns DID_OK |
SAM_STAT_COMMAND_TERMINATED which fails the command. Instead, set hostbyte
to DID_RESET to allow upper layers to retry.

Tested by copying a large file between two pvscsi disks on same adapter
while performing a bus reset at 1-second intervals. Before fix, commands
sometimes fail with DID_OK. After fix, commands observed to fail with
DID_RESET.

Signed-off-by: Jim Gill <jgill@vmware.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: fcoe: drop frames in ELS LOGO error path

[ Upstream commit 63d0e3dffda311e77b9a8c500d59084e960a824a ]

Drop the frames in the ELS LOGO error path instead of just returning an
error.

This fixes the following kmemleak report:
unreferenced object 0xffff880064cb1000 (size 424):
  comm "kworker/0:2", pid 24, jiffies 4294904293 (age 68.504s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<(____ptrval____)>] _fc_frame_alloc+0x2c/0x180 [libfc]
    [<(____ptrval____)>] fc_lport_enter_logo+0x106/0x360 [libfc]
    [<(____ptrval____)>] fc_fabric_logoff+0x8c/0xc0 [libfc]
    [<(____ptrval____)>] fcoe_if_destroy+0x79/0x3b0 [fcoe]
    [<(____ptrval____)>] fcoe_destroy_work+0xd2/0x170 [fcoe]
    [<(____ptrval____)>] process_one_work+0x7ff/0x1420
    [<(____ptrval____)>] worker_thread+0x87/0xef0
    [<(____ptrval____)>] kthread+0x2db/0x390
    [<(____ptrval____)>] ret_from_fork+0x35/0x40
    [<(____ptrval____)>] 0xffffffffffffffff

which can be triggered by issuing
echo eth0 > /sys/bus/fcoe/ctlr_destroy

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: net: lmc: fix case value for target abort error

[ Upstream commit afb41bb039656f0cecb54eeb8b2e2088201295f5 ]

Current value for a target abort error is 0x010, however, this value
should in fact be 0x002.  As it stands, the range of error is 0..7 so
it is currently never being detected.  This bug has been in the driver
since the early 2.6.12 days (or before).

Detected by CoverityScan, CID#744290 ("Logically dead code")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arc: fix type warnings in arc/mm/cache.c

[ Upstream commit ec837d620c750c0d4996a907c8c4f7febe1bbeee ]

Fix type warnings in arch/arc/mm/cache.c.

../arch/arc/mm/cache.c: In function 'flush_anon_page':
../arch/arc/mm/cache.c:1062:55: warning: passing argument 2 of '__flush_dcache_page' makes integer from pointer without a cast [-Wint-conversion]
  __flush_dcache_page((phys_addr_t)page_address(page), page_address(page));
                                                       ^~~~~~~~~~~~~~~~~~
../arch/arc/mm/cache.c:1013:59: note: expected 'long unsigned int' but argument is of type 'void *'
 void __flush_dcache_page(phys_addr_t paddr, unsigned long vaddr)
                                             ~~~~~~~~~~~~~~^~~~~

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: linux-snps-arc@lists.infradead.org
Cc: Elad Kanfi <eladkan@mellanox.com>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Ofer Levi <oferle@mellanox.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arc: fix build errors in arc/include/asm/delay.h

[ Upstream commit 2423665ec53f2a29191b35382075e9834288a975 ]

Fix build errors in arch/arc/'s delay.h:
- add "extern unsigned long loops_per_jiffy;"
- add <asm-generic/types.h> for "u64"

In file included from ../drivers/infiniband/hw/cxgb3/cxio_hal.c:32:
../arch/arc/include/asm/delay.h: In function '__udelay':
../arch/arc/include/asm/delay.h:61:12: error: 'u64' undeclared (first use in this function)
  loops = ((u64) usecs * 4295 * HZ * loops_per_jiffy) >> 32;
            ^~~

In file included from ../drivers/infiniband/hw/cxgb3/cxio_hal.c:32:
../arch/arc/include/asm/delay.h: In function '__udelay':
../arch/arc/include/asm/delay.h:63:37: error: 'loops_per_jiffy' undeclared (first use in this function)
  loops = ((u64) usecs * 4295 * HZ * loops_per_jiffy) >> 32;
                                     ^~~~~~~~~~~~~~~

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: linux-snps-arc@lists.infradead.org
Cc: Elad Kanfi <eladkan@mellanox.com>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Ofer Levi <oferle@mellanox.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

enic: handle mtu change for vf properly

[ Upstream commit ab123fe071c9aa9680ecd62eb080eb26cff4892c ]

When driver gets notification for mtu change, driver does not handle it for
all RQs. It handles only RQ[0].

Fix is to use enic_change_mtu() interface to change mtu for vf.

Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "MIPS: BCM47XX: Enable 74K Core ExternalSync for PCIe erratum"

[ Upstream commit d5ea019f8a381f88545bb26993b62ec24a2796b7 ]

This reverts commit 2a027b47dba6 ("MIPS: BCM47XX: Enable 74K Core
ExternalSync for PCIe erratum").

Enabling ExternalSync caused a regression for BCM4718A1 (used e.g. in
Netgear E3000 and ASUS RT-N16): it simply hangs during PCIe
initialization. It's likely that BCM4717A1 is also affected.

I didn't notice that earlier as the only BCM47XX devices with PCIe I
own are:
1) BCM4706 with 2 x 14e4:4331
2) BCM4706 with 14e4:4360 and 14e4:4331
it appears that BCM4706 is unaffected.

While BCM5300X-ES300-RDS.pdf seems to document that erratum and its
workarounds (according to quotes provided by Tokunori) it seems not even
Broadcom follows them.

According to the provided info Broadcom should define CONF7_ES in their
SDK's mipsinc.h and implement workaround in the si_mips_init(). Checking
both didn't reveal such code. It *could* mean Broadcom also had some
problems with the given workaround.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Reported-by: Michael Marley <michael@michaelmarley.com>
Patchwork: https://patchwork.linux-mips.org/patch/20032/
URL: https://bugs.openwrt.org/index.php?do=details&task_id=1688
Cc: Tokunori Ikegami <ikegami@allied-telesis.co.jp>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools/power turbostat: Read extended processor family from CPUID

[ Upstream commit 5aa3d1a20a233d4a5f1ec3d62da3f19d9afea682 ]

This fixes the reported family on modern AMD processors (e.g. Ryzen,
which is family 0x17). Previously these processors all showed up as
family 0xf.

See the document
https://support.amd.com/TechDocs/56255_OSRR.pdf
section CPUID_Fn00000001_EAX for how to calculate the family
from the BaseFamily and ExtFamily values.

This matches the code in arch/x86/lib/cpu.c

Signed-off-by: Calvin Walton <calvin.walton@kepstin.ca>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

zswap: re-check zswap_is_full() after do zswap_shrink()

[ Upstream commit 16e536ef47f567289a5699abee9ff7bb304bc12d ]

/sys/../zswap/stored_pages keeps rising in a zswap test with
"zswap.max_pool_percent=0" parameter.  But it should not compress or
store pages any more since there is no space in the compressed pool.

Reproduce steps:
  1. Boot kernel with "zswap.enabled=1"
  2. Set the max_pool_percent to 0
      # echo 0 > /sys/module/zswap/parameters/max_pool_percent
  3. Do memory stress test to see if some pages have been compressed
      # stress --vm 1 --vm-bytes $mem_available"M" --timeout 60s
  4. Watching the 'stored_pages' number increasing or not

The root cause is:

  When zswap_max_pool_percent is set to 0 via kernel parameter,
  zswap_is_full() will always return true due to zswap_shrink().  But if
  the shinking is able to reclain a page successfully the code then
  proceeds to compressing/storing another page, so the value of
  stored_pages will keep changing.

To solve the issue, this patch adds a zswap_is_full() check again after
  zswap_shrink() to make sure it's now under the max_pool_percent, and to
  not compress/store if we reached the limit.

Link: http://lkml.kernel.org/r/20180530103936.17812-1-liwang@redhat.com
Signed-off-by: Li Wang <liwang@redhat.com>
Acked-by: Dan Streetman <ddstreet@ieee.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Huang Ying <huang.ying.caritas@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/ftrace: Add snapshot and tracing_on test case

[ Upstream commit 82f4f3e69c5c29bce940dd87a2c0f16c51d48d17 ]

Add a testcase for checking snapshot and tracing_on
relationship. This ensures that the snapshotting doesn't
affect current tracing on/off settings.

Link: http://lkml.kernel.org/r/153149932412.11274.15289227592627901488.stgit@devbox
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Hiraku Toyooka <hiraku.toyooka@cybertrust.co.jp>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cachefiles: Wait rather than BUG'ing on "Unexpected object collision"

[ Upstream commit c2412ac45a8f8f1cd582723c1a139608694d410d ]

If we meet a conflicting object that is marked FSCACHE_OBJECT_IS_LIVE in
the active object tree, we have been emitting a BUG after logging
information about it and the new object.

Instead, we should wait for the CACHEFILES_OBJECT_ACTIVE flag to be cleared
on the old object (or return an error).  The ACTIVE flag should be cleared
after it has been removed from the active object tree.  A timeout of 60s is
used in the wait, so we shouldn't be able to get stuck there.

Fixes: 9ae326a69004 ("CacheFiles: A cache that backs onto a mounted filesystem")
Signed-off-by: Kiran Kumar Modukuri <kiran.modukuri@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cachefiles: Fix refcounting bug in backing-file read monitoring

[ Upstream commit 934140ab028713a61de8bca58c05332416d037d1 ]

cachefiles_read_waiter() has the right to access a 'monitor' object by
virtue of being called under the waitqueue lock for one of the pages in its
purview.  However, it has no ref on that monitor object or on the
associated operation.

What it is allowed to do is to move the monitor object to the operation's
to_do list, but once it drops the work_lock, it's actually no longer
permitted to access that object.  However, it is trying to enqueue the
retrieval operation for processing - but it can only do this via a pointer
in the monitor object, something it shouldn't be doing.

If it doesn't enqueue the operation, the operation may not get processed.
If the order is flipped so that the enqueue is first, then it's possible
for the work processor to look at the to_do list before the monitor is
enqueued upon it.

Fix this by getting a ref on the operation so that we can trust that it
will still be there once we've added the monitor to the to_do list and
dropped the work_lock.  The op can then be enqueued after the lock is
dropped.

The bug can manifest in one of a couple of ways.  The first manifestation
looks like:

 FS-Cache:
 FS-Cache: Assertion failed
 FS-Cache: 6 == 5 is false
 ------------[ cut here ]------------
 kernel BUG at fs/fscache/operation.c:494!
 RIP: 0010:fscache_put_operation+0x1e3/0x1f0
 ...
 fscache_op_work_func+0x26/0x50
 process_one_work+0x131/0x290
 worker_thread+0x45/0x360
 kthread+0xf8/0x130
 ? create_worker+0x190/0x190
 ? kthread_cancel_work_sync+0x10/0x10
 ret_from_fork+0x1f/0x30

This is due to the operation being in the DEAD state (6) rather than
INITIALISED, COMPLETE or CANCELLED (5) because it's already passed through
fscache_put_operation().

The bug can also manifest like the following:

 kernel BUG at fs/fscache/operation.c:69!
 ...
    [exception RIP: fscache_enqueue_operation+246]
 ...
 #7 [ffff883fff083c10] fscache_enqueue_operation at ffffffffa0b793c6
 #8 [ffff883fff083c28] cachefiles_read_waiter at ffffffffa0b15a48
 #9 [ffff883fff083c48] __wake_up_common at ffffffff810af028

I'm not entirely certain as to which is line 69 in Lei's kernel, so I'm not
entirely clear which assertion failed.

Fixes: 9ae326a69004 ("CacheFiles: A cache that backs onto a mounted filesystem")
Reported-by: Lei Xue <carmark.dlut@gmail.com>
Reported-by: Vegard Nossum <vegard.nossum@gmail.com>
Reported-by: Anthony DeRobertis <aderobertis@metrics.net>
Reported-by: NeilBrown <neilb@suse.com>
Reported-by: Daniel Axtens <dja@axtens.net>
Reported-by: Kiran Kumar Modukuri <kiran.modukuri@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fscache: Allow cancelled operations to be enqueued

[ Upstream commit d0eb06afe712b7b103b6361f40a9a0c638524669 ]

Alter the state-check assertion in fscache_enqueue_operation() to allow
cancelled operations to be given processing time so they can be cleaned up.

Also fix a debugging statement that was requiring such operations to have
an object assigned.

Fixes: 9ae326a69004 ("CacheFiles: A cache that backs onto a mounted filesystem")
Reported-by: Kiran Kumar Modukuri <kiran.modukuri@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: axienet: Fix double deregister of mdio

[ Upstream commit 03bc7cab7d7218088412a75e141696a89059ab00 ]

If the registration fails then mdio_unregister is called.
However at unbind the unregister ia attempted again resulting
in the below crash

[   73.544038] kernel BUG at drivers/net/phy/mdio_bus.c:415!
[   73.549362] Internal error: Oops - BUG: 0 [#1] SMP
[   73.554127] Modules linked in:
[   73.557168] CPU: 0 PID: 2249 Comm: sh Not tainted 4.14.0 #183
[   73.562895] Hardware name: xlnx,zynqmp (DT)
[   73.567062] task: ffffffc879e41180 task.stack: ffffff800cbe0000
[   73.572973] PC is at mdiobus_unregister+0x84/0x88
[   73.577656] LR is at axienet_mdio_teardown+0x18/0x30
[   73.582601] pc : [<ffffff80085fa4cc>] lr : [<ffffff8008616858>]
pstate: 20000145
[   73.589981] sp : ffffff800cbe3c30
[   73.593277] x29: ffffff800cbe3c30 x28: ffffffc879e41180
[   73.598573] x27: ffffff8008a21000 x26: 0000000000000040
[   73.603868] x25: 0000000000000124 x24: ffffffc879efe920
[   73.609164] x23: 0000000000000060 x22: ffffffc879e02000
[   73.614459] x21: ffffffc879e02800 x20: ffffffc87b0b8870
[   73.619754] x19: ffffffc879e02800 x18: 000000000000025d
[   73.625050] x17: 0000007f9a719ad0 x16: ffffff8008195bd8
[   73.630345] x15: 0000007f9a6b3d00 x14: 0000000000000010
[   73.635640] x13: 74656e7265687465 x12: 0000000000000030
[   73.640935] x11: 0000000000000030 x10: 0101010101010101
[   73.646231] x9 : 241f394f42533300 x8 : ffffffc8799f6e98
[   73.651526] x7 : ffffffc8799f6f18 x6 : ffffffc87b0ba318
[   73.656822] x5 : ffffffc87b0ba498 x4 : 0000000000000000
[   73.662117] x3 : 0000000000000000 x2 : 0000000000000008
[   73.667412] x1 : 0000000000000004 x0 : ffffffc8799f4000
[   73.672708] Process sh (pid: 2249, stack limit = 0xffffff800cbe0000)

Fix the same by making the bus NULL on unregister.

Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bnx2x: Fix invalid memory access in rss hash config path.

[ Upstream commit ae2dcb28c24794a87e424a726a1cf1a61980f52d ]

Rx hash/filter table configuration uses rss_conf_obj to configure filters
in the hardware. This object is initialized only when the interface is
brought up.
This patch adds driver changes to configure rss params only when the device
is in opened state. In port disabled case, the config will be cached in the
driver structure which will be applied in the successive load path.

Please consider applying it to 'net' branch.

Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: staging: omap4iss: Include asm/cacheflush.h after generic includes

[ Upstream commit 0894da849f145af51bde88a6b84f95b9c9e0bc66 ]

Including asm/cacheflush.h first results in the following build error
when trying to build sparc32:allmodconfig, because 'struct page' has not
been declared, and the function declaration ends up creating a separate
(private) declaration of struct page (as a result of function arguments
being in the scope of the function declaration and definition, not in
global scope).

The C scoping rules do not just affect variable visibility, they also
affect type declaration visibility.

The end result is that when the actual call site is seen in
<linux/highmem.h>, the 'struct page' type in the caller is not the same
'struct page' that the function was declared with, resulting in:

  In file included from arch/sparc/include/asm/page.h:10:0,
                   ...
                   from drivers/staging/media/omap4iss/iss_video.c:15:
  include/linux/highmem.h: In function 'clear_user_highpage':
  include/linux/highmem.h:137:31: error:
passing argument 1 of 'sparc_flush_page_to_ram' from incompatible
pointer type

Include generic includes files first to fix the problem.

Fixes: fc96d58c10162 ("[media] v4l: omap4iss: Add support for OMAP4 camera interface - Video devices")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[ Added explanation of C scope rules - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: davinci: Avoid zero value of CLKH

[ Upstream commit cc8de9a68599b261244ea453b38678229f06ada7 ]

If CLKH is set to 0 I2C clock is not generated at all, so avoid this value
and stretch the clock in this case.

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: mpc5xxx_can: check of_iomap return before use

[ Upstream commit b5c1a23b17e563b656cc9bb76ce5323b997d90e8 ]

of_iomap() can return NULL so that return needs to be checked and NULL
treated as failure. While at it also take care of the missing
of_node_put() in the error path.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Fixes: commit afa17a500a36 ("net/can: add driver for mscan family & mpc52xx_mscan")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: prevent ISA drivers from building on PPC32

[ Upstream commit c9ce1fa1c24b08e13c2a3b5b1f94a19c9eaa982c ]

Prevent drivers from building on PPC32 if they use isa_bus_to_virt(),
isa_virt_to_bus(), or isa_page_to_bus(), which are not available and
thus cause build errors.

../drivers/net/ethernet/3com/3c515.c: In function 'corkscrew_open':
../drivers/net/ethernet/3com/3c515.c:824:9: error: implicit declaration of function 'isa_virt_to_bus'; did you mean 'virt_to_bus'? [-Werror=implicit-function-declaration]

../drivers/net/ethernet/amd/lance.c: In function 'lance_rx':
../drivers/net/ethernet/amd/lance.c:1203:23: error: implicit declaration of function 'isa_bus_to_virt'; did you mean 'bus_to_virt'? [-Werror=implicit-function-declaration]

../drivers/net/ethernet/amd/ni65.c: In function 'ni65_init_lance':
../drivers/net/ethernet/amd/ni65.c:585:20: error: implicit declaration of function 'isa_virt_to_bus'; did you mean 'virt_to_bus'? [-Werror=implicit-function-declaration]

../drivers/net/ethernet/cirrus/cs89x0.c: In function 'net_open':
../drivers/net/ethernet/cirrus/cs89x0.c:897:20: error: implicit declaration of function 'isa_virt_to_bus'; did you mean 'virt_to_bus'? [-Werror=implicit-function-declaration]

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

atl1c: reserve min skb headroom

[ Upstream commit 6e56830776828d8ca9897fc4429eeab47c3bb432 ]

Got crash report with following backtrace:
BUG: unable to handle kernel paging request at ffff8801869daffe
RIP: 0010:[<ffffffff816429c4>]  [<ffffffff816429c4>] ip6_finish_output2+0x394/0x4c0
RSP: 0018:ffff880186c83a98  EFLAGS: 00010283
RAX: ffff8801869db00e ...
  [<ffffffff81644cdc>] ip6_finish_output+0x8c/0xf0
  [<ffffffff81644d97>] ip6_output+0x57/0x100
  [<ffffffff81643dc9>] ip6_forward+0x4b9/0x840
  [<ffffffff81645566>] ip6_rcv_finish+0x66/0xc0
  [<ffffffff81645db9>] ipv6_rcv+0x319/0x530
  [<ffffffff815892ac>] netif_receive_skb+0x1c/0x70
  [<ffffffffc0060bec>] atl1c_clean+0x1ec/0x310 [atl1c]
  ...

The bad access is in neigh_hh_output(), at skb->data - 16 (HH_DATA_MOD).
atl1c driver provided skb with no headroom, so 14 bytes (ethernet
header) got pulled, but then 16 are copied.

Reserve NET_SKB_PAD bytes headroom, like netdev_alloc_skb().

Compile tested only; I lack hardware.

Fixes: 7b7017642199 ("atl1c: Fix misuse of netdev_alloc_skb in refilling rx ring")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qed: Fix possible race for the link state value.

[ Upstream commit 58874c7b246109d8efb2b0099d1aa296d6bfc3fa ]

There's a possible race where driver can read link status in mid-transition
and see that virtual-link is up yet speed is 0. Since in this
mid-transition we're guaranteed to see a mailbox from MFW soon, we can
afford to treat this as link down.

Fixes: cc875c2e ("qed: Add link support")
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: caif: Add a missing rcu_read_unlock() in caif_flow_cb

[ Upstream commit 64119e05f7b31e83e2555f6782e6cdc8f81c63f4 ]

Add a missing rcu_read_unlock in the error path

Fixes: c95567c80352 ("caif: added check for potential null return")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools/power turbostat: fix -S on UP systems

[ Upstream commit 9d83601a9cc1884d1b5706ee2acc661d558c6838 ]

The -S (system summary) option failed to print any data on a 1-processor system.

Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: f_uac2: fix endianness of 'struct cntrl_*_lay3'

[ Upstream commit eec24f2a0d4dc3b1d95a3ccd2feb523ede3ba775 ]

The list [1] of commits doing endianness fixes in USB subsystem is long
due to below quote from USB spec Revision 2.0 from April 27, 2000:

------------
8.1 Byte/Bit Ordering

Multiple byte fields in standard descriptors, requests, and responses
are interpreted as and moved over the bus in little-endian order, i.e.
LSB to MSB.
------------

This commit belongs to the same family.

[1] Example of endianness fixes in USB subsystem:
commit 14e1d56cbea6 ("usb: gadget: f_uac2: endianness fixes.")
commit 42370b821168 ("usb: gadget: f_uac1: endianness fixes.")
commit 63afd5cc7877 ("USB: chaoskey: fix Alea quirk on big-endian hosts")
commit 74098c4ac782 ("usb: gadget: acm: fix endianness in notifications")
commit cdd7928df0d2 ("ACM gadget: fix endianness in notifications")
commit 323ece54e076 ("cdc-wdm: fix endianness bug in debug statements")
commit e102609f1072 ("usb: gadget: uvc: Fix endianness mismatches")
       list goes on

Fixes: 132fcb460839 ("usb: gadget: Add Audio Class 2.0 Driver")
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Reviewed-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools: usb: ffs-test: Fix build on big endian systems

[ Upstream commit a2b22dddc7bb6110ac3b5ed1a60aa9279836fadb ]

The tools/usb/ffs-test.c file defines cpu_to_le16/32 by using the C
library htole16/32 function calls. However, cpu_to_le16/32 are used when
initializing structures, i.e in a context where a function call is not
allowed.

It works fine on little endian systems because htole16/32 are defined by
the C library as no-ops. But on big-endian systems, they are actually
doing something, which might involve calling a function, causing build
failures, such as:

   ffs-test.c:48:25: error: initializer element is not constant
    #define cpu_to_le32(x)  htole32(x)
                            ^~~~~~~
   ffs-test.c:128:12: note: in expansion of macro ‘cpu_to_le32’
      .magic = cpu_to_le32(FUNCTIONFS_DESCRIPTORS_MAGIC_V2),
               ^~~~~~~~~~~

To solve this, we code cpu_to_le16/32 in a way that allows them to be
used when initializing structures. This fix was imported from
meta-openembedded/android-tools/fix-big-endian-build.patch written by
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>.

CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb/phy: fix PPC64 build errors in phy-fsl-usb.c

[ Upstream commit a39ba90a1cc7010edb0a7132e1b67f3d80b994e9 ]

Fix build errors when built for PPC64:
These variables are only used on PPC32 so they don't need to be
initialized for PPC64.

../drivers/usb/phy/phy-fsl-usb.c: In function 'usb_otg_start':
../drivers/usb/phy/phy-fsl-usb.c:865:3: error: '_fsl_readl' undeclared (first use in this function); did you mean 'fsl_readl'?
   _fsl_readl = _fsl_readl_be;
../drivers/usb/phy/phy-fsl-usb.c:865:16: error: '_fsl_readl_be' undeclared (first use in this function); did you mean 'fsl_readl'?
   _fsl_readl = _fsl_readl_be;
../drivers/usb/phy/phy-fsl-usb.c:866:3: error: '_fsl_writel' undeclared (first use in this function); did you mean 'fsl_writel'?
   _fsl_writel = _fsl_writel_be;
../drivers/usb/phy/phy-fsl-usb.c:866:17: error: '_fsl_writel_be' undeclared (first use in this function); did you mean 'fsl_writel'?
   _fsl_writel = _fsl_writel_be;
../drivers/usb/phy/phy-fsl-usb.c:868:16: error: '_fsl_readl_le' undeclared (first use in this function); did you mean 'fsl_readl'?
   _fsl_readl = _fsl_readl_le;
../drivers/usb/phy/phy-fsl-usb.c:869:17: error: '_fsl_writel_le' undeclared (first use in this function); did you mean 'fsl_writel'?
   _fsl_writel = _fsl_writel_le;

and the sysfs "show" function return type should be ssize_t, not int:

../drivers/usb/phy/phy-fsl-usb.c:1042:49: error: initialization of 'ssize_t (*)(struct device *, struct device_attribute *, char *)' {aka 'long int (*)(struct device *, struct device_attribute *, char *)'} from incompatible pointer type 'int (*)(struct device *, struct device_attribute *, char *)' [-Werror=incompatible-pointer-types]
 static DEVICE_ATTR(fsl_usb2_otg_state, S_IRUGO, show_fsl_usb2_otg_state, NULL);

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: linux-usb@vger.kernel.org
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: r8a66597: Fix a possible sleep-in-atomic-context bugs in r8a66597_queue()

[ Upstream commit f36b507c14c4b6e634463a610294e9cb0065c8ea ]

The driver may sleep in an interrupt handler.
The function call path (from bottom to top) in Linux-4.16.7 is:

[FUNC] r8a66597_queue(GFP_KERNEL)
drivers/usb/gadget/udc/r8a66597-udc.c, 1193:
r8a66597_queue in get_status
drivers/usb/gadget/udc/r8a66597-udc.c, 1301:
get_status in setup_packet
drivers/usb/gadget/udc/r8a66597-udc.c, 1381:
setup_packet in irq_control_stage
drivers/usb/gadget/udc/r8a66597-udc.c, 1508:
irq_control_stage in r8a66597_irq (interrupt handler)

To fix this bug, GFP_KERNEL is replaced with GFP_ATOMIC.

This bug is found by my static analysis tool (DSAC-2) and checked by
my code review.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: r8a66597: Fix two possible sleep-in-atomic-context bugs in init_controller()

[ Upstream commit 0602088b10a7c0b4e044a810678ef93d7cc5bf48 ]

The driver may sleep with holding a spinlock.
The function call paths (from bottom to top) in Linux-4.16.7 are:

[FUNC] msleep
drivers/usb/gadget/udc/r8a66597-udc.c, 839:
msleep in init_controller
drivers/usb/gadget/udc/r8a66597-udc.c, 96:
init_controller in r8a66597_usb_disconnect
drivers/usb/gadget/udc/r8a66597-udc.c, 93:
spin_lock in r8a66597_usb_disconnect

[FUNC] msleep
drivers/usb/gadget/udc/r8a66597-udc.c, 835:
msleep in init_controller
drivers/usb/gadget/udc/r8a66597-udc.c, 96:
init_controller in r8a66597_usb_disconnect
drivers/usb/gadget/udc/r8a66597-udc.c, 93:
spin_lock in r8a66597_usb_disconnect

To fix these bugs, msleep() is replaced with mdelay().

This bug is found by my static analysis tool (DSAC-2) and checked by
my code review.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/imx: imx-ldb: check if channel is enabled before printing warning

[ Upstream commit c80d673b91a6c81d765864e10f2b15110ee900ad ]

If the second LVDS channel has been disabled in the DT when using dual-channel
mode we should not print a warning.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/imx: imx-ldb: disable LDB on driver bind

[ Upstream commit b58262396fabd43dc869b576e3defdd23b32fe94 ]

The LVDS signal integrity is only guaranteed when the correct enable
sequence (first IPU DI, then LDB) is used. If the LDB display output was
active before the imx-drm driver is loaded (like when a bootsplash was
active) the DI will be disabled by the full IPU reset we do when loading
the driver. The LDB control registers are not part of the IPU range and
thus will remain unchanged.

This leads to the LDB still being active when the DI is getting enabled,
effectively reversing the required enable sequence. Fix this by also
disabling the LDB on driver bind.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: libiscsi: fix possible NULL pointer dereference in case of TMF

[ Upstream commit a17037e7d59075053b522048742a08ac9500bde8 ]

In iscsi_check_tmf_restrictions() task->hdr is dereferenced to print the
opcode, it is possible that task->hdr is NULL.

There are two cases based on opcode argument:

1. ISCSI_OP_SCSI_CMD - In this case alloc_pdu() is called
after iscsi_check_tmf_restrictions()

iscsi_prep_scsi_cmd_pdu() -> iscsi_check_tmf_restrictions() -> alloc_pdu().

Transport drivers allocate memory for iSCSI hdr in alloc_pdu() and assign
it to task->hdr. In case of TMF task->hdr will be NULL resulting in NULL
pointer dereference.

2. ISCSI_OP_SCSI_DATA_OUT - In this case transport driver can free the
memory for iSCSI hdr after transmitting the pdu so task->hdr can be NULL or
invalid.

This patch fixes this issue by removing task->hdr->opcode from the printk
statement.

Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/bridge: adv7511: Reset registers on hotplug

[ Upstream commit 5f3417569165a8ee57654217f73e0160312f409c ]

The bridge loses its hw state when the cable is unplugged. If we detect
this case in the hpd handler, reset its state.

Reported-by: Rob Clark <robdclark@gmail.com>
Tested-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180703165648.120401-1-seanpaul@chromium.org
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nl80211: Add a missing break in parse_station_flags

[ Upstream commit 5cf3006cc81d9aa09a10aa781fc065546b12919d ]

I was looking at usually suppressed gcc warnings,
[-Wimplicit-fallthrough=] in this case:

The code definitely looks like a break is missing here.
However I am not able to test the NL80211_IFTYPE_MESH_POINT,
nor do I actually know what might be :)
So please use this patch with caution and only if you are
able to do some testing.

Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
[johannes: looks obvious enough to apply as is, interesting
 though that it never seems to have been a problem]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: add stations tied to AP_VLANs during hw reconfig

[ Upstream commit 19103a4bfb42f320395daa5616ece3e89e759d63 ]

As part of hw reconfig, only stations linked to AP interfaces are added
back to the driver ignoring those which are tied to AP_VLAN interfaces.

It is true that there could be stations tied to the AP_VLAN interface while
serving 4addr clients or when using AP_VLAN for VLAN operations; we should
be adding these stations back to the driver as part of hw reconfig, failing
to do so can cause functional issues.

In the case of ath10k driver, the following errors were observed.

ath10k_pci : failed to install key for non-existent peer XX:XX:XX:XX:XX:XX
Workqueue: events_freezable ieee80211_restart_work [mac80211]
(unwind_backtrace) from (show_stack+0x10/0x14)
(show_stack) (dump_stack+0x80/0xa0)
(dump_stack) (warn_slowpath_common+0x68/0x8c)
(warn_slowpath_common) (warn_slowpath_null+0x18/0x20)
(warn_slowpath_null) (ieee80211_enable_keys+0x88/0x154 [mac80211])
(ieee80211_enable_keys) (ieee80211_reconfig+0xc90/0x19c8 [mac80211])
(ieee80211_reconfig]) (ieee80211_restart_work+0x8c/0xa0 [mac80211])
(ieee80211_restart_work) (process_one_work+0x284/0x488)
(process_one_work) (worker_thread+0x228/0x360)
(worker_thread) (kthread+0xd8/0xec)
(kthread) (ret_from_fork+0x14/0x24)

Also while bringing down the AP VAP, WARN_ONs and errors related to peer
removal were observed.

ath10k_pci : failed to clear all peer wep keys for vdev 0: -2
ath10k_pci : failed to disassociate station: 8c:fd:f0:0a:8c:f5 vdev 0: -2
(unwind_backtrace) (show_stack+0x10/0x14)
(show_stack) (dump_stack+0x80/0xa0)
(dump_stack) (warn_slowpath_common+0x68/0x8c)
(warn_slowpath_common) (warn_slowpath_null+0x18/0x20)
(warn_slowpath_null) (sta_set_sinfo+0xb98/0xc9c [mac80211])
(sta_set_sinfo [mac80211]) (__sta_info_flush+0xf0/0x134 [mac80211])
(__sta_info_flush [mac80211]) (ieee80211_stop_ap+0xe8/0x390 [mac80211])
(ieee80211_stop_ap [mac80211]) (__cfg80211_stop_ap+0xe0/0x3dc [cfg80211])
(__cfg80211_stop_ap [cfg80211]) (cfg80211_stop_ap+0x30/0x44 [cfg80211])
(cfg80211_stop_ap [cfg80211]) (genl_rcv_msg+0x274/0x30c)
(genl_rcv_msg) (netlink_rcv_skb+0x58/0xac)
(netlink_rcv_skb) (genl_rcv+0x20/0x34)
(genl_rcv) (netlink_unicast+0x11c/0x204)
(netlink_unicast) (netlink_sendmsg+0x30c/0x370)
(netlink_sendmsg) (sock_sendmsg+0x70/0x84)
(sock_sendmsg) (___sys_sendmsg.part.3+0x188/0x228)
(___sys_sendmsg.part.3) (__sys_sendmsg+0x4c/0x70)
(__sys_sendmsg) (ret_fast_syscall+0x0/0x44)

These issues got fixed by adding the stations which are
tied to AP_VLANs back to the driver.

Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfrm: free skb if nlsk pointer is NULL

[ Upstream commit 86126b77dcd551ce223e7293bb55854e3df05646 ]

nlmsg_multicast() always frees the skb, so in case we cannot call
it we must do that ourselves.

Fixes: 21ee543edc0dea ("xfrm: fix race between netns cleanup and state expire notification")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfrm: fix missing dst_release() after policy blocking lbcast and multicast

[ Upstream commit 8cc88773855f988d6a3bbf102bbd9dd9c828eb81 ]

Fix missing dst_release() when local broadcast or multicast traffic is
xfrm policy blocked.

For IPv4 this results to dst leak: ip_route_output_flow() allocates
dst_entry via __ip_route_output_key() and passes it to
xfrm_lookup_route(). xfrm_lookup returns ERR_PTR(-EPERM) that is
propagated. The dst that was allocated is never released.

IPv4 local broadcast testcase:
 ping -b 192.168.1.255 &
 sleep 1
 ip xfrm policy add src 0.0.0.0/0 dst 192.168.1.255/32 dir out action block

IPv4 multicast testcase:
 ping 224.0.0.1 &
 sleep 1
 ip xfrm policy add src 0.0.0.0/0 dst 224.0.0.1/32 dir out action block

For IPv6 the missing dst_release() causes trouble e.g. when used in netns:
 ip netns add TEST
 ip netns exec TEST ip link set lo up
 ip link add dummy0 type dummy
 ip link set dev dummy0 netns TEST
 ip netns exec TEST ip addr add fd00::1111 dev dummy0
 ip netns exec TEST ip link set dummy0 up
 ip netns exec TEST ping -6 -c 5 ff02::1%dummy0 &
 sleep 1
 ip netns exec TEST ip xfrm policy add src ::/0 dst ff02::1 dir out action block
 wait
 ip netns del TEST

After netns deletion we see:
[  258.239097] unregister_netdevice: waiting for lo to become free. Usage count = 2
[  268.279061] unregister_netdevice: waiting for lo to become free. Usage count = 2
[  278.367018] unregister_netdevice: waiting for lo to become free. Usage count = 2
[  288.375259] unregister_netdevice: waiting for lo to become free. Usage count = 2

Fixes: ac37e2515c1a ("xfrm: release dst_orig in case of error in xfrm_lookup()")
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vti6: fix PMTU caching and reporting on xmit

[ Upstream commit d6990976af7c5d8f55903bfb4289b6fb030bf754 ]

When setting the skb->dst before doing the MTU check, the route PMTU
caching and reporting is done on the new dst which is about to be
released.

Instead, PMTU handling should be done using the original dst.

This is aligned with IPv4 VTI.

Fixes: ccd740cbc6 ("vti6: Add pmtu handling to vti6_xmit.")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cipso: cipso_v4_optptr enter infinite loop

commit 40413955ee265a5e42f710940ec78f5450d49149 upstream.

in for(),if((optlen > 0) && (optptr[1] == 0)), enter infinite loop.

Test: receive a packet which the ip length > 20 and the first byte of ip option is 0, produce this issue

Signed-off-by: yujuan.qi <yujuan.qi@mediatek.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/sysctl: Check user input value of sysctl_sched_time_avg

commit 5ccba44ba118a5000cccc50076b0344632459779 upstream.

System will hang if user set sysctl_sched_time_avg to 0:

  [root@XXX ~]# sysctl kernel.sched_time_avg_ms=0

  Stack traceback for pid 0
  0xffff883f6406c600 0 0 1 3 R 0xffff883f6406cf50 *swapper/3
  ffff883f7ccc3ae8 0000000000000018 ffffffff810c4dd0 0000000000000000
  0000000000017800 ffff883f7ccc3d78 0000000000000003 ffff883f7ccc3bf8
  ffffffff810c4fc9 ffff883f7ccc3c08 00000000810c5043 ffff883f7ccc3c08
  Call Trace:
  <IRQ> [<ffffffff810c4dd0>] ? update_group_capacity+0x110/0x200
  [<ffffffff810c4fc9>] ? update_sd_lb_stats+0x109/0x600
  [<ffffffff810c5507>] ? find_busiest_group+0x47/0x530
  [<ffffffff810c5b84>] ? load_balance+0x194/0x900
  [<ffffffff810ad5ca>] ? update_rq_clock.part.83+0x1a/0xe0
  [<ffffffff810c6d42>] ? rebalance_domains+0x152/0x290
  [<ffffffff810c6f5c>] ? run_rebalance_domains+0xdc/0x1d0
  [<ffffffff8108a75b>] ? __do_softirq+0xfb/0x320
  [<ffffffff8108ac85>] ? irq_exit+0x125/0x130
  [<ffffffff810b3a17>] ? scheduler_ipi+0x97/0x160
  [<ffffffff81052709>] ? smp_reschedule_interrupt+0x29/0x30
  [<ffffffff8173a1be>] ? reschedule_interrupt+0x6e/0x80
   <EOI> [<ffffffff815bc83c>] ? cpuidle_enter_state+0xcc/0x230
  [<ffffffff815bc80c>] ? cpuidle_enter_state+0x9c/0x230
  [<ffffffff815bc9d7>] ? cpuidle_enter+0x17/0x20
  [<ffffffff810cd6dc>] ? cpu_startup_entry+0x38c/0x420
  [<ffffffff81053373>] ? start_secondary+0x173/0x1e0

Because divide-by-zero error happens in function:

update_group_capacity()
  update_cpu_capacity()
    scale_rt_capacity()
     {
          ...
          total = sched_avg_period() + delta;
          used = div_u64(avg, total);
          ...
     }

To fix this issue, check user input value of sysctl_sched_time_avg, keep
it unchanged when hitting invalid input, and set the minimum limit of
sysctl_sched_time_avg to 1 ms.

Reported-by: James Puthukattukaran <james.puthukattukaran@oracle.com>
Signed-off-by: Ethan Zhao <ethan.zhao@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: efault@gmx.de
Cc: ethan.kernel@gmail.com
Cc: keescook@chromium.org
Cc: mcgrof@kernel.org
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/1504504774-18253-1-git-send-email-ethan.zhao@oracle.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Steve Muckle <smuckle@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.4.153

ovl: warn instead of error if d_type is not supported

commit e7c0b5991dd1be7b6f6dc2b54a15a0f47b64b007 upstream.

overlay needs underlying fs to support d_type. Recently I put in a
patch in to detect this condition and started failing mount if
underlying fs did not support d_type.

But this breaks existing configurations over kernel upgrade. Those who
are running docker (partially broken configuration) with xfs not
supporting d_type, are surprised that after kernel upgrade docker does
not run anymore.

https://github.com/docker/docker/issues/22937#issuecomment-229881315

So instead of erroring out, detect broken configuration and warn
about it. This should allow existing docker setups to continue
working after kernel upgrade.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 45aebeaf4f67 ("ovl: Ensure upper filesystem supports d_type")
Cc: <stable@vger.kernel.org> 4.6
Signed-off-by: SZ Lin (林上智) <sz.lin@moxa.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ovl: Do d_type check only if work dir creation was successful

commit 21765194cecf2e4514ad75244df459f188140a0f upstream.

d_type check requires successful creation of workdir as iterates
through work dir and expects work dir to be present in it. If that's
not the case, this check will always return d_type not supported even
if underlying filesystem might be supporting it.

So don't do this check if work dir creation failed in previous step.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: SZ Lin (林上智) <sz.lin@moxa.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ovl: Ensure upper filesystem supports d_type

commit 45aebeaf4f67468f76bedf62923a576a519a9b68 upstream.

In some instances xfs has been created with ftype=0 and there if a file
on lower fs is removed, overlay leaves a whiteout in upper fs but that
whiteout does not get filtered out and is visible to overlayfs users.

And reason it does not get filtered out because upper filesystem does
not report file type of whiteout as DT_CHR during iterate_dir().

So it seems to be a requirement that upper filesystem support d_type for
overlayfs to work properly. Do this check during mount and fail if d_type
is not supported.

Suggested-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: SZ Lin (林上智) <sz.lin@moxa.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm: Fix use-after-free of ldt_struct

commit ccd5b3235180eef3cfec337df1c8554ab151b5cc upstream.

The following commit:

  39a0526fb3f7 ("x86/mm: Factor out LDT init from context init")

renamed init_new_context() to init_new_context_ldt() and added a new
init_new_context() which calls init_new_context_ldt().  However, the
error code of init_new_context_ldt() was ignored.  Consequently, if a
memory allocation in alloc_ldt_struct() failed during a fork(), the
->context.ldt of the new task remained the same as that of the old task
(due to the memcpy() in dup_mm()).  ldt_struct's are not intended to be
shared, so a use-after-free occurred after one task exited.

Fix the bug by making init_new_context() pass through the error code of
init_new_context_ldt().

This bug was found by syzkaller, which encountered the following splat:

    BUG: KASAN: use-after-free in free_ldt_struct.part.2+0x10a/0x150 arch/x86/kernel/ldt.c:116
    Read of size 4 at addr ffff88006d2cb7c8 by task kworker/u9:0/3710

    CPU: 1 PID: 3710 Comm: kworker/u9:0 Not tainted 4.13.0-rc4-next-20170811 #2
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
    Call Trace:
     __dump_stack lib/dump_stack.c:16 [inline]
     dump_stack+0x194/0x257 lib/dump_stack.c:52
     print_address_description+0x73/0x250 mm/kasan/report.c:252
     kasan_report_error mm/kasan/report.c:351 [inline]
     kasan_report+0x24e/0x340 mm/kasan/report.c:409
     __asan_report_load4_noabort+0x14/0x20 mm/kasan/report.c:429
     free_ldt_struct.part.2+0x10a/0x150 arch/x86/kernel/ldt.c:116
     free_ldt_struct arch/x86/kernel/ldt.c:173 [inline]
     destroy_context_ldt+0x60/0x80 arch/x86/kernel/ldt.c:171
     destroy_context arch/x86/include/asm/mmu_context.h:157 [inline]
     __mmdrop+0xe9/0x530 kernel/fork.c:889
     mmdrop include/linux/sched/mm.h:42 [inline]
     exec_mmap fs/exec.c:1061 [inline]
     flush_old_exec+0x173c/0x1ff0 fs/exec.c:1291
     load_elf_binary+0x81f/0x4ba0 fs/binfmt_elf.c:855
     search_binary_handler+0x142/0x6b0 fs/exec.c:1652
     exec_binprm fs/exec.c:1694 [inline]
     do_execveat_common.isra.33+0x1746/0x22e0 fs/exec.c:1816
     do_execve+0x31/0x40 fs/exec.c:1860
     call_usermodehelper_exec_async+0x457/0x8f0 kernel/umh.c:100
     ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431

    Allocated by task 3700:
     save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59
     save_stack+0x43/0xd0 mm/kasan/kasan.c:447
     set_track mm/kasan/kasan.c:459 [inline]
     kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551
     kmem_cache_alloc_trace+0x136/0x750 mm/slab.c:3627
     kmalloc include/linux/slab.h:493 [inline]
     alloc_ldt_struct+0x52/0x140 arch/x86/kernel/ldt.c:67
     write_ldt+0x7b7/0xab0 arch/x86/kernel/ldt.c:277
     sys_modify_ldt+0x1ef/0x240 arch/x86/kernel/ldt.c:307
     entry_SYSCALL_64_fastpath+0x1f/0xbe

    Freed by task 3700:
     save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59
     save_stack+0x43/0xd0 mm/kasan/kasan.c:447
     set_track mm/kasan/kasan.c:459 [inline]
     kasan_slab_free+0x71/0xc0 mm/kasan/kasan.c:524
     __cache_free mm/slab.c:3503 [inline]
     kfree+0xca/0x250 mm/slab.c:3820
     free_ldt_struct.part.2+0xdd/0x150 arch/x86/kernel/ldt.c:121
     free_ldt_struct arch/x86/kernel/ldt.c:173 [inline]
     destroy_context_ldt+0x60/0x80 arch/x86/kernel/ldt.c:171
     destroy_context arch/x86/include/asm/mmu_context.h:157 [inline]
     __mmdrop+0xe9/0x530 kernel/fork.c:889
     mmdrop include/linux/sched/mm.h:42 [inline]
     __mmput kernel/fork.c:916 [inline]
     mmput+0x541/0x6e0 kernel/fork.c:927
     copy_process.part.36+0x22e1/0x4af0 kernel/fork.c:1931
     copy_process kernel/fork.c:1546 [inline]
     _do_fork+0x1ef/0xfb0 kernel/fork.c:2025
     SYSC_clone kernel/fork.c:2135 [inline]
     SyS_clone+0x37/0x50 kernel/fork.c:2129
     do_syscall_64+0x26c/0x8c0 arch/x86/entry/common.c:287
     return_from_SYSCALL_64+0x0/0x7a

Here is a C reproducer:

    #include <asm/ldt.h>
    #include <pthread.h>
    #include <signal.h>
    #include <stdlib.h>
    #include <sys/syscall.h>
    #include <sys/wait.h>
    #include <unistd.h>

    static void *fork_thread(void *_arg)
    {
        fork();
    }

    int main(void)
    {
        struct user_desc desc = { .entry_number = 8191 };

        syscall(__NR_modify_ldt, 1, &desc, sizeof(desc));

        for (;;) {
            if (fork() == 0) {
                pthread_t t;

                srand(getpid());
                pthread_create(&t, NULL, fork_thread, NULL);
                usleep(rand() % 10000);
                syscall(__NR_exit_group, 0);
            }
            wait(NULL);
        }
    }

Note: the reproducer takes advantage of the fact that alloc_ldt_struct()
may use vmalloc() to allocate a large ->entries array, and after
commit:

  5d17a73a2ebe ("vmalloc: back off when the current task is killed")

it is possible for userspace to fail a task's vmalloc() by
sending a fatal signal, e.g. via exit_group().  It would be more
difficult to reproduce this bug on kernels without that commit.

This bug only affected kernels with CONFIG_MODIFY_LDT_SYSCALL=y.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: <stable@vger.kernel.org> [v4.6+]
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Fixes: 39a0526fb3f7 ("x86/mm: Factor out LDT init from context init")
Link: http://lkml.kernel.org/r/20170824175029.76040-1-ebiggers3@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm/pat: Fix L1TF stable backport for CPA

Patch for stable only to fix boot resets caused by the L1TF patches.

Stable trees reverted the following patch

Revert "x86/mm/pat: Ensure cpa->pfn only contains page frame numbers"

    This reverts commit 87e2bd898d3a79a8c609f183180adac47879a2a4 which is
    commit edc3b9129cecd0f0857112136f5b8b1bc1d45918 upstream.

but the L1TF patch backported here

   x86/mm/pat: Make set_memory_np() L1TF safe

    commit 958f79b9ee55dfaf00c8106ed1c22a2919e0028b upstream

    set_memory_np() is used to mark kernel mappings not present, but it has
    it's own open coded mechanism which does not have the L1TF protection of
    inverting the address bits.

assumed that cpa->pfn contains a PFN. With the above patch reverted
it does not, which causes the PMD to be set to an incorrect address
shifted by 12 bits, which can cause early boot reset on some
systems, like an Apollo Lake embedded system.

Convert the address to a PFN before passing it to pmd_pfn()

Thanks to Bernhard for bisecting and testing.

Cc: stable@vger.kernel.org # 4.4 and 4.9
Reported-by: Bernhard Kaindl <bernhard.kaindl@thalesgroup.com>
Tested-by: Bernhard Kaindl <bernhard.kaindl@thalesgroup.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.4.152

reiserfs: fix broken xattr handling (heap corruption, bad retval)

commit a13f085d111e90469faf2d9965eb39b11c114d7e upstream.

This fixes the following issues:

- When a buffer size is supplied to reiserfs_listxattr() such that each
  individual name fits, but the concatenation of all names doesn't fit,
  reiserfs_listxattr() overflows the supplied buffer.  This leads to a
  kernel heap overflow (verified using KASAN) followed by an out-of-bounds
  usercopy and is therefore a security bug.

- When a buffer size is supplied to reiserfs_listxattr() such that a
  name doesn't fit, -ERANGE should be returned.  But reiserfs instead just
  truncates the list of names; I have verified that if the only xattr on a
  file has a longer name than the supplied buffer length, listxattr()
  incorrectly returns zero.

With my patch applied, -ERANGE is returned in both cases and the memory
corruption doesn't happen anymore.

Credit for making me clean this code up a bit goes to Al Viro, who pointed
out that the ->actor calling convention is suboptimal and should be
changed.

Link: http://lkml.kernel.org/r/20180802151539.5373-1-jannh@google.com
Fixes: 48b32a3553a5 ("reiserfs: use generic xattr handlers")
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Jeff Mahoney <jeffm@suse.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: imx: Fix race condition in dma read

commit bed4ff1ed4d8f2ef5007c5c6ae1b29c5677a3632 upstream.

This fixes a race condition, where the DMAEN bit ends up being set after
I2C slave has transmitted a byte following the dummy read.  When that
happens, an interrupt is generated instead, and no DMA request is generated
to kickstart the DMA read, and a timeout happens after DMA_TIMEOUT (1 sec).

Fixed by setting the DMAEN bit before the dummy read.

Signed-off-by: Esben Haabendal <eha@deif.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: pciehp: Fix use-after-free on unplug

commit 281e878eab191cce4259abbbf1a0322e3adae02c upstream.

When pciehp is unbound (e.g. on unplug of a Thunderbolt device), the
hotplug_slot struct is deregistered and thus freed before freeing the
IRQ.  The IRQ handler and the work items it schedules print the slot
name referenced from the freed structure in various informational and
debug log messages, each time resulting in a quadruple dereference of
freed pointers (hotplug_slot -> pci_slot -> kobject -> name).

At best the slot name is logged as "(null)", at worst kernel memory is
exposed in logs or the driver crashes:

  pciehp 0000:10:00.0:pcie204: Slot((null)): Card not present

An attacker may provoke the bug by unplugging multiple devices on a
Thunderbolt daisy chain at once.  Unplugging can also be simulated by
powering down slots via sysfs.  The bug is particularly easy to trigger
in poll mode.

It has been present since the driver's introduction in 2004:
https://git.kernel.org/tglx/history/c/c16b4b14d980

Fix by rearranging teardown such that the IRQ is freed first.  Run the
work items queued by the IRQ handler to completion before freeing the
hotplug_slot struct by draining the work queue from the ->release_slot
callback which is invoked by pci_hp_deregister().

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v2.6.4
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Skip MPS logic for Virtual Functions (VFs)

commit 3dbe97efe8bf450b183d6dee2305cbc032e6b8a4 upstream.

PCIe r4.0, sec 9.3.5.4, "Device Control Register", shows both
Max_Payload_Size (MPS) and Max_Read_request_Size (MRRS) to be 'RsvdP' for
VFs.  Just prior to the table it states:

  "PF and VF functionality is defined in Section 7.5.3.4 except where
   noted in Table 9-16.  For VF fields marked 'RsvdP', the PF setting
   applies to the VF."

All of which implies that with respect to Max_Payload_Size Supported
(MPSS), MPS, and MRRS values, we should not be paying any attention to the
VF's fields, but rather only to the PF's.  Only looking at the PF's fields
also logically makes sense as it's the sole physical interface to the PCIe
bus.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=200527
Fixes: 27d868b5e6cf ("PCI: Set MPS to match upstream bridge")
Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # 4.3+
Cc: Keith Busch <keith.busch@intel.com>
Cc: Sinan Kaya <okaya@kernel.org>
Cc: Dongdong Liu <liudongdong3@huawei.com>
Cc: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: hotplug: Don't leak pci_slot on registration failure

commit 4ce6435820d1f1cc2c2788e232735eb244bcc8a3 upstream.

If addition of sysfs files fails on registration of a hotplug slot, the
struct pci_slot as well as the entry in the slot_list is leaked.  The
issue has been present since the hotplug core was introduced in 2002:
https://git.kernel.org/tglx/history/c/a8a2069f432c

Perhaps the idea was that even though sysfs addition fails, the slot
should still be usable.  But that's not how drivers use the interface,
they abort probe if a non-zero value is returned.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v2.4.15+
Cc: Greg Kroah-Hartman <greg@kroah.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Remove unnecessary barriers from spinlock.h

commit 3b885ac1dc35b87a39ee176a6c7e2af9c789d8b8 upstream.

Now that mb() is an instruction barrier, it will slow performance if we issue
unnecessary barriers.

The spinlock defines have a number of unnecessary barriers.  The __ldcw()
define is both a hardware and compiler barrier.  The mb() barriers in the
routines using __ldcw() serve no purpose.

The only barrier needed is the one in arch_spin_unlock().  We need to ensure
all accesses are complete prior to releasing the lock.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # 4.0+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bridge: Propagate vlan add failure to user

commit 08474cc1e6ea71237cab7e4a651a623c9dea1084 upstream.

Disallow adding interfaces to a bridge when vlan filtering operation
failed. Send the failure code to the user.

Signed-off-by: Elad Raz <eladr@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: SZ Lin (林上智) <sz.lin@moxa.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

packet: refine ring v3 block size test to hold one frame

commit 4576cd469d980317c4edd9173f8b694aa71ea3a3 upstream.

TPACKET_V3 stores variable length frames in fixed length blocks.
Blocks must be able to store a block header, optional private space
and at least one minimum sized frame.

Frames, even for a zero snaplen packet, store metadata headers and
optional reserved space.

In the block size bounds check, ensure that the frame of the
chosen configuration fits. This includes sockaddr_ll and optional
tp_reserve.

Syzbot was able to construct a ring with insuffient room for the
sockaddr_ll in the header of a zero-length frame, triggering an
out-of-bounds write in dev_parse_header.

Convert the comparison to less than, as zero is a valid snap len.
This matches the test for minimum tp_frame_size immediately below.

Fixes: f6fb8f100b80 ("af-packet: TPACKET_V3 flexible buffer implementation.")
Fixes: eb73190f4fbe ("net/packet: refine check for priv area size")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: conntrack: dccp: treat SYNC/SYNCACK as invalid if no prior state

commit 6613b6173dee098997229caf1f3b961c49da75e6 upstream.

When first DCCP packet is SYNC or SYNCACK, we insert a new conntrack
that has an un-initialized timeout value, i.e. such entry could be
reaped at any time.

Mark them as INVALID and only ignore SYNC/SYNCACK when connection had
an old state.

Reported-by: syzbot+6f18401420df260e37ed@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfrm_user: prevent leaking 2 bytes of kernel memory

commit 45c180bc29babbedd6b8c01b975780ef44d9d09c upstream.

struct xfrm_userpolicy_type has two holes, so we should not
use C99 style initializer.

KMSAN report:

BUG: KMSAN: kernel-infoleak in copyout lib/iov_iter.c:140 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x1b14/0x2800 lib/iov_iter.c:571
CPU: 1 PID: 4520 Comm: syz-executor841 Not tainted 4.17.0+ #5
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x185/0x1d0 lib/dump_stack.c:113
 kmsan_report+0x188/0x2a0 mm/kmsan/kmsan.c:1117
 kmsan_internal_check_memory+0x138/0x1f0 mm/kmsan/kmsan.c:1211
 kmsan_copy_to_user+0x7a/0x160 mm/kmsan/kmsan.c:1253
 copyout lib/iov_iter.c:140 [inline]
 _copy_to_iter+0x1b14/0x2800 lib/iov_iter.c:571
 copy_to_iter include/linux/uio.h:106 [inline]
 skb_copy_datagram_iter+0x422/0xfa0 net/core/datagram.c:431
 skb_copy_datagram_msg include/linux/skbuff.h:3268 [inline]
 netlink_recvmsg+0x6f1/0x1900 net/netlink/af_netlink.c:1959
 sock_recvmsg_nosec net/socket.c:802 [inline]
 sock_recvmsg+0x1d6/0x230 net/socket.c:809
 ___sys_recvmsg+0x3fe/0x810 net/socket.c:2279
 __sys_recvmmsg+0x58e/0xe30 net/socket.c:2391
 do_sys_recvmmsg+0x2a6/0x3e0 net/socket.c:2472
 __do_sys_recvmmsg net/socket.c:2485 [inline]
 __se_sys_recvmmsg net/socket.c:2481 [inline]
 __x64_sys_recvmmsg+0x15d/0x1c0 net/socket.c:2481
 do_syscall_64+0x15b/0x230 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x446ce9
RSP: 002b:00007fc307918db8 EFLAGS: 00000293 ORIG_RAX: 000000000000012b
RAX: ffffffffffffffda RBX: 00000000006dbc24 RCX: 0000000000446ce9
RDX: 000000000000000a RSI: 0000000020005040 RDI: 0000000000000003
RBP: 00000000006dbc20 R08: 0000000020004e40 R09: 0000000000000000
R10: 0000000040000000 R11: 0000000000000293 R12: 0000000000000000
R13: 00007ffc8d2df32f R14: 00007fc3079199c0 R15: 0000000000000001

Uninit was stored to memory at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:279 [inline]
 kmsan_save_stack mm/kmsan/kmsan.c:294 [inline]
 kmsan_internal_chain_origin+0x12b/0x210 mm/kmsan/kmsan.c:685
 kmsan_memcpy_origins+0x11d/0x170 mm/kmsan/kmsan.c:527
 __msan_memcpy+0x109/0x160 mm/kmsan/kmsan_instr.c:413
 __nla_put lib/nlattr.c:569 [inline]
 nla_put+0x276/0x340 lib/nlattr.c:627
 copy_to_user_policy_type net/xfrm/xfrm_user.c:1678 [inline]
 dump_one_policy+0xbe1/0x1090 net/xfrm/xfrm_user.c:1708
 xfrm_policy_walk+0x45a/0xd00 net/xfrm/xfrm_policy.c:1013
 xfrm_dump_policy+0x1c0/0x2a0 net/xfrm/xfrm_user.c:1749
 netlink_dump+0x9b5/0x1550 net/netlink/af_netlink.c:2226
 __netlink_dump_start+0x1131/0x1270 net/netlink/af_netlink.c:2323
 netlink_dump_start include/linux/netlink.h:214 [inline]
 xfrm_user_rcv_msg+0x8a3/0x9b0 net/xfrm/xfrm_user.c:2577
 netlink_rcv_skb+0x37e/0x600 net/netlink/af_netlink.c:2448
 xfrm_netlink_rcv+0xb2/0xf0 net/xfrm/xfrm_user.c:2598
 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
 netlink_unicast+0x1680/0x1750 net/netlink/af_netlink.c:1336
 netlink_sendmsg+0x104f/0x1350 net/netlink/af_netlink.c:1901
 sock_sendmsg_nosec net/socket.c:629 [inline]
 sock_sendmsg net/socket.c:639 [inline]
 ___sys_sendmsg+0xec8/0x1320 net/socket.c:2117
 __sys_sendmsg net/socket.c:2155 [inline]
 __do_sys_sendmsg net/socket.c:2164 [inline]
 __se_sys_sendmsg net/socket.c:2162 [inline]
 __x64_sys_sendmsg+0x331/0x460 net/socket.c:2162
 do_syscall_64+0x15b/0x230 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
Local variable description: ----upt.i@dump_one_policy
Variable was created at:
 dump_one_policy+0x78/0x1090 net/xfrm/xfrm_user.c:1689
 xfrm_policy_walk+0x45a/0xd00 net/xfrm/xfrm_policy.c:1013

Byte 130 of 137 is uninitialized
Memory access starts at ffff88019550407f

Fixes: c0144beaeca42 ("[XFRM] netlink: Use nla_put()/NLA_PUT() variantes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Remove ordered stores from syscall.S

commit 7797167ffde1f00446301cb22b37b7c03194cfaf upstream.

Now that we use a sync prior to releasing the locks in syscall.S, we don't need
the PA 2.0 ordered stores used to release some locks.  Using an ordered store,
potentially slows the release and subsequent code.

There are a number of other ordered stores and loads that serve no purpose.  I
have converted these to normal stores.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # 4.0+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix spectre gadget in ext4_mb_regular_allocator()

commit 1a5d5e5d51e75a5bca67dadbcea8c841934b7b85 upstream.

'ac->ac_g_ex.fe_len' is a user-controlled value which is used in the
derivation of 'ac->ac_2order'. 'ac->ac_2order', in turn, is used to
index arrays which makes it a potential spectre gadget. Fix this by
sanitizing the value assigned to 'ac->ac2_order'.  This covers the
following accesses found with the help of smatch:

* fs/ext4/mballoc.c:1896 ext4_mb_simple_scan_group() warn: potential
  spectre issue 'grp->bb_counters' [w] (local cap)

* fs/ext4/mballoc.c:445 mb_find_buddy() warn: potential spectre issue
  'EXT4_SB(e4b->bd_sb)->s_mb_offsets' [r] (local cap)

* fs/ext4/mballoc.c:446 mb_find_buddy() warn: potential spectre issue
  'EXT4_SB(e4b->bd_sb)->s_mb_maxs' [r] (local cap)

Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Jeremy Cline <jcline@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: irqfd: fix race between EPOLLHUP and irq_bypass_register_consumer

commit 9432a3175770e06cb83eada2d91fac90c977cb99 upstream.

A comment warning against this bug is there, but the code is not doing what
the comment says.  Therefore it is possible that an EPOLLHUP races against
irq_bypass_register_consumer.  The EPOLLHUP handler schedules irqfd_shutdown,
and if that runs soon enough, you get a use-after-free.

Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ion: check for kref overflow

This patch is against 4.4. It does not apply to master due to a large
rework of ion in 4.12 which removed the affected functions altogther.
4c23cbff073f3b9b ("staging: android: ion: Remove import interface")

Userspace can cause the kref to handles to increment
arbitrarily high. Ensure it does not overflow.

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: identify cryptic messages as TCP seq # bugs

[ Upstream commit e56b8ce363a36fb7b74b80aaa5cc9084f2c908b4 ]

Attempt to make cryptic TCP seq number error messages clearer by
(1) identifying the source of the message as "TCP", (2) identifying the
errors as "seq # bug", and (3) grouping the field identifiers and values
by separating them with commas.

E.g., the following message is changed from:

recvmsg bug 2: copied 73BCB6CD seq 70F17CBE rcvnxt 73BCB9AA fl 0
WARNING: CPU: 2 PID: 1501 at /linux/net/ipv4/tcp.c:1881 tcp_recvmsg+0x649/0xb90

to:

TCP recvmsg seq # bug 2: copied 73BCB6CD, seq 70F17CBE, rcvnxt 73BCB9AA, fl 0
WARNING: CPU: 2 PID: 1501 at /linux/net/ipv4/tcp.c:2011 tcp_recvmsg+0x694/0xba0

Suggested-by: 積丹尼 Dan Jacobson <jidanni@jidanni.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: qca_spi: Fix log level if probe fails

[ Upstream commit 50973993260a6934f0a00da53d9b746cfbea89ab ]

In cases the probing fails the log level of the messages should
be an error.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: qca_spi: Make sure the QCA7000 reset is triggered

[ Upstream commit 711c62dfa6bdb4326ca6c587f295ea5c4f7269de ]

In case the SPI thread is not running, a simple reset of sync
state won't fix the transmit timeout. We also need to wake up the kernel
thread.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Fixes: ed7d42e24eff ("net: qca_spi: fix transmit queue timeout handling")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: qca_spi: Avoid packet drop during initial sync

[ Upstream commit b2bab426dc715de147f8039a3fccff27d795f4eb ]

As long as the synchronization with the QCA7000 isn't finished, we
cannot accept packets from the upper layers. So let the SPI thread
enable the TX queue after sync and avoid unwanted packet drop.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: usb: rtl8150: demote allmulti message to dev_dbg()

[ Upstream commit 3a9b0455062ffb9d2f6cd4473a76e3456f318c9f ]

This driver can spam the kernel log with multiple messages of:

    net eth0: eth0: allmulti set

Usually 4 or 8 at a time (probably because of using ConnMan).

This message doesn't seem useful, so let's demote it from dev_info()
to dev_dbg().

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/ethernet/freescale/fman: fix cross-build error

[ Upstream commit c133459765fae249ba482f62e12f987aec4376f0 ]

  CC [M]  drivers/net/ethernet/freescale/fman/fman.o
In file included from ../drivers/net/ethernet/freescale/fman/fman.c:35:
../include/linux/fsl/guts.h: In function 'guts_set_dmacr':
../include/linux/fsl/guts.h:165:2: error: implicit declaration of function 'clrsetbits_be32' [-Werror=implicit-function-declaration]
  clrsetbits_be32(&guts->dmacr, 3 << shift, device << shift);
  ^~~~~~~~~~~~~~~

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Madalin Bucur <madalin.bucur@nxp.com>
Cc: netdev@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/gem: off by one bugs in nouveau_gem_pushbuf_reloc_apply()

[ Upstream commit 7f073d011f93e92d4d225526b9ab6b8b0bbd6613 ]

The bo array has req->nr_buffers elements so the > should be >= so we
don't read beyond the end of the array.

Fixes: a1606a9596e5 ("drm/nouveau: new gem pushbuf interface, bump to 0.0.16")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: remove DELAYED ACK events in DCTCP

[ Upstream commit a69258f7aa2623e0930212f09c586fd06674ad79 ]

After fixing the way DCTCP tracking delayed ACKs, the delayed-ACK
related callbacks are no longer needed

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qlogic: check kstrtoul() for errors

[ Upstream commit 5fc853cc01c68f84984ecc2d5fd777ecad78240f ]

We accidentally left out the error handling for kstrtoul().

Fixes: a520030e326a ("qlcnic: Implement flash sysfs callback for 83xx adapter")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

packet: reset network header if packet shorter than ll reserved space

[ Upstream commit 993675a3100b16a4c80dfd70cbcde8ea7127b31d ]

If variable length link layer headers result in a packet shorter
than dev->hard_header_len, reset the network header offset. Else
skb->mac_len may exceed skb->len after skb_mac_reset_len.

packet_sendmsg_spkt already has similar logic.

Fixes: b84bbaf7a6c8 ("packet: in packet_snd start writing at link layer allocation")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ixgbe: Be more careful when modifying MAC filters

[ Upstream commit d14c780c11fbc10f66c43e7b64eefe87ca442bd3 ]

This change makes it so that we are much more explicit about the ordering
of updates to the receive address register (RAR) table. Prior to this patch
I believe we may have been updating the table while entries were still
active, or possibly allowing for reordering of things since we weren't
explicitly flushing writes to either the lower or upper portion of the
register prior to accessing the other half.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Reviewed-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: am3517.dtsi: Disable reference to OMAP3 OTG controller

[ Upstream commit 923847413f7316b5ced3491769b3fefa6c56a79a ]

The AM3517 has a different OTG controller location than the OMAP3,
which is included from omap3.dtsi.  This results in a hwmod error.
Since the AM3517 has a different OTG controller address, this patch
disabes one that is isn't available.

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 8780/1: ftrace: Only set kernel memory back to read-only after boot

[ Upstream commit b4c7e2bd2eb4764afe3af9409ff3b1b87116fa30 ]

Dynamic ftrace requires modifying the code segments that are usually
set to read-only. To do this, a per arch function is called both before
and after the ftrace modifications are performed. The "before" function
will set kernel code text to read-write to allow for ftrace to make the
modifications, and the "after" function will set the kernel code text
back to "read-only" to keep the kernel code text protected.

The issue happens when dynamic ftrace is tested at boot up. The test is
done before the kernel code text has been set to read-only. But the
"before" and "after" calls are still performed. The "after" call will
change the kernel code text to read-only prematurely, and other boot
code that expects this code to be read-write will fail.

The solution is to add a variable that is set when the kernel code text
is expected to be converted to read-only, and make the ftrace "before"
and "after" calls do nothing if that variable is not yet set. This is
similar to the x86 solution from commit 162396309745 ("ftrace, x86:
make kernel text writable only for conversions").

Link: http://lkml.kernel.org/r/20180620212906.24b7b66e@vmware.local.home
Reported-by: Stefan Agner <stefan@agner.ch>
Tested-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf llvm-utils: Remove bashism from kernel include fetch script

[ Upstream commit f6432b9f65001651412dbc3589d251534822d4ab ]

Like system(), popen() calls /bin/sh, which may/may not be bash.

Script when run on dash and encounters the line, yields:

 exit: Illegal number: -1

checkbashisms report on script content:

 possible bashism (exit|return with negative status code):
 exit -1

Remove the bashism and use the more portable non-zero failure
status code 1.

Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20180629124652.8d0af7e2281fd3fd8262cacc@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bnxt_en: Fix for system hang if request_irq fails

[ Upstream commit c58387ab1614f6d7fb9e244f214b61e7631421fc ]

Fix bug in the error code path when bnxt_request_irq() returns failure.
bnxt_disable_napi() should not be called in this error path because
NAPI has not been enabled yet.

Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.")
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/armada: fix colorkey mode property

[ Upstream commit d378859a667edc99e3473704847698cae97ca2b1 ]

The colorkey mode property was not correctly disabling the colorkeying
when "disabled" mode was selected.  Arrange for this to work as one
would expect.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ieee802154: fakelb: switch from BUG_ON() to WARN_ON() on problem

[ Upstream commit 8f2fbc6c60ff213369e06a73610fc882a42fdf20 ]

The check is valid but it does not warrant to crash the kernel. A
WARN_ON() is good enough here.
Found by checkpatch.

Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ieee802154: at86rf230: use __func__ macro for debug messages

[ Upstream commit 8a81388ec27c4c0adbdecd20e67bb5f411ab46b2 ]

Instead of having the function name hard-coded (it might change and we
forgot to update them in the debug output) we can use __func__ instead
and also shorter the line so we do not need to break it. Also fix an
extra blank line while being here.
Found by checkpatch.

Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ieee802154: at86rf230: switch from BUG_ON() to WARN_ON() on problem

[ Upstream commit 20f330452ad8814f2289a589baf65e21270879a7 ]

The check is valid but it does not warrant to crash the kernel. A
WARN_ON() is good enough here.
Found by checkpatch.

Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: pxa: irq: fix handling of ICMR registers in suspend/resume

[ Upstream commit 0c1049dcb4ceec640d8bd797335bcbebdcab44d2 ]

PXA3xx platforms have 56 interrupts that are stored in two ICMR
registers. The code in pxa_irq_suspend() and pxa_irq_resume() however
does a simple division by 32 which only leads to one register being
saved at suspend and restored at resume time. The NAND interrupt
setting, for instance, is lost.

Fix this by using DIV_ROUND_UP() instead.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: x_tables: set module owner for icmp(6) matches

[ Upstream commit d376bef9c29b3c65aeee4e785fffcd97ef0a9a81 ]

nft_compat relies on xt_request_find_match to increment
refcount of the module that provides the match/target.

The (builtin) icmp matches did't set the module owner so it
was possible to rmmod ip(6)tables while icmp extensions were still in use.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

smsc75xx: Add workaround for gigabit link up hardware errata.

[ Upstream commit d461e3da905332189aad546b2ad9adbe6071c7cc ]

In certain conditions, the device may not be able to link in gigabit mode. This software workaround ensures that the device will not enter the failure state.

Fixes: d0cad871703b898a442e4049c532ec39168e5b57 ("SMSC75XX USB 2.0 Gigabit Ethernet Devices")
Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kasan: fix shadow_size calculation error in kasan_module_alloc

[ Upstream commit 1e8e18f694a52d703665012ca486826f64bac29d ]

There is a special case that the size is "(N << KASAN_SHADOW_SCALE_SHIFT)
Pages plus X", the value of X is [1, KASAN_SHADOW_SCALE_SIZE-1].  The
operation "size >> KASAN_SHADOW_SCALE_SHIFT" will drop X, and the
roundup operation can not retrieve the missed one page.  For example:
size=0x28006, PAGE_SIZE=0x1000, KASAN_SHADOW_SCALE_SHIFT=3, we will get
shadow_size=0x5000, but actually we need 6 pages.

  shadow_size = round_up(size >> KASAN_SHADOW_SCALE_SHIFT, PAGE_SIZE);

This can lead to a kernel crash when kasan is enabled and the value of
mod->core_layout.size or mod->init_layout.size is like above.  Because
the shadow memory of X has not been allocated and mapped.

move_module:
  ptr = module_alloc(mod->core_layout.size);
  ...
  memset(ptr, 0, mod->core_layout.size); //crashed

  Unable to handle kernel paging request at virtual address ffff0fffff97b000
  ......
  Call trace:
    __asan_storeN+0x174/0x1a8
    memset+0x24/0x48
    layout_and_allocate+0xcd8/0x1800
    load_module+0x190/0x23e8
    SyS_finit_module+0x148/0x180

Link: http://lkml.kernel.org/r/1529659626-12660-1-git-send-email-thunder.leizhen@huawei.com
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Dmitriy Vyukov <dvyukov@google.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Libin <huawei.libin@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Use __printf markup to silence compiler

[ Upstream commit 26b68dd2f48fe7699a89f0cfbb9f4a650dc1c837 ]

Silence warnings (triggered at W=1) by adding relevant __printf attributes.

  CC      kernel/trace/trace.o
kernel/trace/trace.c: In function ‘__trace_array_vprintk’:
kernel/trace/trace.c:2979:2: warning: function might be possible candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
  len = vscnprintf(tbuffer, TRACE_BUF_SIZE, fmt, args);
  ^~~
  AR      kernel/trace/built-in.o

Link: http://lkml.kernel.org/r/20180308205843.27447-1-malat@debian.org
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: imx_v4_v5_defconfig: Select ULPI support

[ Upstream commit 2ceb2780b790b74bc408a949f6aedbad8afa693e ]

Select CONFIG_USB_CHIPIDEA_ULPI and CONFIG_USB_ULPI_BUS so that
USB ULPI can be functional on some boards like that use ULPI
interface.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: imx_v6_v7_defconfig: Select ULPI support

[ Upstream commit 157bcc06094c3c5800d3f4676527047b79b618e7 ]

Select CONFIG_USB_CHIPIDEA_ULPI and CONFIG_USB_ULPI_BUS so that
USB ULPI can be functional on some boards like imx51-babbge.

This fixes a kernel hang in 4.18-rc1 on i.mx51-babbage, caused by commit
03e6275ae381 ("usb: chipidea: Fix ULPI on imx51").

Suggested-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: wacom: Correct touch maximum XY of 2nd-gen Intuos

[ Upstream commit 3b8d573586d1b9dee33edf6cb6f2ca05f4bca568 ]

The touch sensors on the 2nd-gen Intuos tablets don't use a 4096x4096
sensor like other similar tablets (3rd-gen Bamboo, Intuos5, etc.).
The incorrect maximum XY values don't normally affect userspace since
touch input from these devices is typically relative rather than
absolute. It does, however, cause problems when absolute distances
need to be measured, e.g. for gesture recognition. Since the resolution
of the touch sensor on these devices is 10 units / mm (versus 100 for
the pen sensor), the proper maximum values can be calculated by simply
dividing by 10.

Fixes: b5fd2a3e92 ("Input: wacom - add support for three new Intuos devices")
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

m68k: fix "bad page state" oops on ColdFire boot

[ Upstream commit ecd60532e060e45c63c57ecf1c8549b1d656d34d ]

Booting a ColdFire m68k core with MMU enabled causes a "bad page state"
oops since commit 1d40a5ea01d5 ("mm: mark pages in use for page tables"):

 BUG: Bad page state in process sh  pfn:01ce2
 page:004fefc8 count:0 mapcount:-1024 mapping:00000000 index:0x0
 flags: 0x0()
 raw: 00000000 00000000 00000000 fffffbff 00000000 00000100 00000200 00000000
 raw: 039c4000
 page dumped because: nonzero mapcount
 Modules linked in:
 CPU: 0 PID: 22 Comm: sh Not tainted 4.17.0-07461-g1d40a5ea01d5 #13

Fix by calling pgtable_page_dtor() in our __pte_free_tlb() code path,
so that the PG_table flag is cleared before we free the pte page.

Note that I had to change the type of pte_free() to be static from
extern. Otherwise you get a lot of warnings like this:

./arch/m68k/include/asm/mcf_pgalloc.h:80:2: warning: ‘pgtable_page_dtor’ is static but used in inline function ‘pte_free’ which is not static
  pgtable_page_dtor(page);
  ^

And making it static is consistent with our use of this in the other
m68k pgalloc definitions of pte_free().

Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
CC: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bnx2x: Fix receiving tx-timeout in error or recovery state.

[ Upstream commit 484c016d9392786ce5c74017c206c706f29f823d ]

Driver performs the internal reload when it receives tx-timeout event from
the OS. Internal reload might fail in some scenarios e.g., fatal HW issues.
In such cases OS still see the link, which would result in undesirable
functionalities such as re-generation of tx-timeouts.
The patch addresses this issue by indicating the link-down to OS when
tx-timeout is detected, and keeping the link in down state till the
internal reload is successful.

Please consider applying it to 'net' branch.

Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/exynos: decon5433: Fix WINCONx reset value

[ Upstream commit 7b7aa62c05eac9789c208b946f515983a9255d8d ]

The only bits that should be preserved in decon_win_set_fmt() is
WINCONx_ENWIN_F. All other bits depends on the selected pixel formats and
are set by the mentioned function.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/exynos: decon5433: Fix per-plane global alpha for XRGB modes

[ Upstream commit ab337fc274a1957ff0771f19e826c736253f7c39 ]

Set per-plane global alpha to maximum value to get proper blending of
XRGB and ARGB planes. This fixes the strange order of overlapping planes.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/exynos: gsc: Fix support for NV16/61, YUV420/YVU420 and YUV422 modes

[ Upstream commit dd209ef809080ced903e7747ee3ef640c923a1d2 ]

Fix following issues related to planar YUV pixel format configuration:
- NV16/61 modes were incorrectly programmed as NV12/21,
- YVU420 was programmed as YUV420 on source,
- YVU420 and YUV422 were programmed as YUV420 on output.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md/raid10: fix that replacement cannot complete recovery after reassemble

[ Upstream commit bda3153998f3eb2cafa4a6311971143628eacdbc ]

During assemble, the spare marked for replacement is not checked.
conf->fullsync cannot be updated to be 1. As a result, recovery will
treat it as a clean array. All recovering sectors are skipped. Original
device is replaced with the not-recovered spare.

mdadm -C /dev/md0 -l10 -n4 -pn2 /dev/loop[0123]
mdadm /dev/md0 -a /dev/loop4
mdadm /dev/md0 --replace /dev/loop0
mdadm -S /dev/md0 # stop array during recovery

mdadm -A /dev/md0 /dev/loop[01234]

After reassemble, you can see recovery go on, but it completes
immediately. In fact, recovery is not actually processed.

To solve this problem, we just add the missing logics for replacment
spares. (In raid1.c or raid5.c, they have already been checked.)

Reported-by: Alex Chen <alexchen@synology.com>
Reviewed-by: Alex Wu <alexwu@synology.com>
Reviewed-by: Chung-Chiang Cheng <cccheng@synology.com>
Signed-off-by: BingJing Chang <bingjingc@synology.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: k3dma: Off by one in k3_of_dma_simple_xlate()

[ Upstream commit c4c2b7644cc9a41f17a8cc8904efe3f66ae4c7ed ]

The d->chans[] array has d->dma_requests elements so the > should be
>= here.

Fixes: 8e6152bc660e ("dmaengine: Add hisilicon k3 DMA engine driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: da850: Fix interrups property for gpio

[ Upstream commit 3eb1b955cd7ed1e621ace856710006c2a8a7f231 ]

The intc #interrupt-cells is equal to 1. Currently gpio
node has 2 cells per IRQ which is wrong. Remove the additional
cell for each of the interrupts.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Fixes: 2e38b946dc54 ("ARM: davinci: da850: add GPIO DT node")
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>