parisc: Add ioread64_lo_hi() and iowrite64_lo_hi()

commit 18a1d5e1945385d9b5adc3fe11427ce4a9d2826e upstream.

It's a followup to the previous commit f15309d7ad5d ("parisc: Add
ioread64_hi_lo() and iowrite64_hi_lo()") which does only half of
the job. Add the rest, so we won't get a new kernel test robot
reports.

Fixes: f15309d7ad5d ("parisc: Add ioread64_hi_lo() and iowrite64_hi_lo()")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: hv: Fix NUMA node assignment when kernel boots with custom NUMA topology

commit 3149efcdf2c6314420c418dfc94de53bfd076b1f upstream.

When kernel boots with a NUMA topology with some NUMA nodes offline, the PCI
driver should only set an online NUMA node on the device. This can happen
during KDUMP where some NUMA nodes are not made online by the KDUMP kernel.

This patch also fixes the case where kernel is booting with "numa=off".

Fixes: 999dd956d838 ("PCI: hv: Add support for protocol 1.3 and support PCI_BUS_RELATIONS2")
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Purna Pavan Chandra Aekkaladevi <paekkaladevi@microsoft.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/1643247814-15184-1-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: amd_sfh: Correct the structure field name

commit aa0b724a2bf041036e56cbb3b4b3afde7c5e7c9e upstream.

Misinterpreted intr_enable field name. Hence correct the structure
field name accordingly to reflect the functionality.

Fixes: f264481ad614 ("HID: amd_sfh: Extend driver capabilities for multi-generation support")
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: amd_sfh: Increase sensor command timeout

commit a7072c01c3ac3ae6ecd08fa7b43431cfc8ed331f upstream.

HPD sensors take more time to initialize. Hence increasing sensor
command timeout to get response with status within a max timeout.

Fixes: 173709f50e98 ("HID: amd_sfh: Add command response to check command status")
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: i2c-hid: goodix: Fix a lockdep splat

commit 2787710f73fcce4a9bdab540aaf1aef778a27462 upstream.

I'm was on the receiving end of a lockdep splat from this driver and after
scratching my head I couldn't be entirely sure it was a false positive
given we would also have to think about whether the regulator locking is
safe (since the notifier is called whilst holding regulator locks which
are also needed for regulator_is_enabled() ).

Regardless of whether it is a real bug or not, the mutex isn't needed.
We can use reference counting tricks instead to avoid races with the
notifier calls.

The observed splat follows:

------------------------------------------------------
kworker/u16:3/127 is trying to acquire lock:
ffff00008021fb20 (&ihid_goodix->regulator_mutex){+.+.}-{4:4}, at: ihid_goodix_vdd_notify+0x30/0x94

but task is already holding lock:
ffff0000835c60c0 (&(&rdev->notifier)->rwsem){++++}-{4:4}, at: blocking_notifier_call_chain+0x30/0x70

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (&(&rdev->notifier)->rwsem){++++}-{4:4}:
       down_write+0x68/0x8c
       blocking_notifier_chain_register+0x54/0x70
       regulator_register_notifier+0x1c/0x24
       devm_regulator_register_notifier+0x58/0x98
       i2c_hid_of_goodix_probe+0xdc/0x158
       i2c_device_probe+0x25d/0x270
       really_probe+0x174/0x2cc
       __driver_probe_device+0xc0/0xd8
       driver_probe_device+0x50/0xe4
       __device_attach_driver+0xa8/0xc0
       bus_for_each_drv+0x9c/0xc0
       __device_attach_async_helper+0x6c/0xbc
       async_run_entry_fn+0x38/0x100
       process_one_work+0x294/0x438
       worker_thread+0x180/0x258
       kthread+0x120/0x130
       ret_from_fork+0x10/0x20

-> #0 (&ihid_goodix->regulator_mutex){+.+.}-{4:4}:
       __lock_acquire+0xd24/0xfe8
       lock_acquire+0x288/0x2f4
       __mutex_lock+0xa0/0x338
       mutex_lock_nested+0x3c/0x5c
       ihid_goodix_vdd_notify+0x30/0x94
       notifier_call_chain+0x6c/0x8c
       blocking_notifier_call_chain+0x48/0x70
       _notifier_call_chain.isra.0+0x18/0x20
       _regulator_enable+0xc0/0x178
       regulator_enable+0x40/0x7c
       goodix_i2c_hid_power_up+0x18/0x20
       i2c_hid_core_power_up.isra.0+0x1c/0x2c
       i2c_hid_core_probe+0xd8/0x3d4
       i2c_hid_of_goodix_probe+0x14c/0x158
       i2c_device_probe+0x25c/0x270
       really_probe+0x174/0x2cc
       __driver_probe_device+0xc0/0xd8
       driver_probe_device+0x50/0xe4
       __device_attach_driver+0xa8/0xc0
       bus_for_each_drv+0x9c/0xc0
       __device_attach_async_helper+0x6c/0xbc
       async_run_entry_fn+0x38/0x100
       process_one_work+0x294/0x438
       worker_thread+0x180/0x258
       kthread+0x120/0x130
       ret_from_fork+0x10/0x20

other info that might help us debug this:

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&(&rdev->notifier)->rwsem);
                               lock(&ihid_goodix->regulator_mutex);
                               lock(&(&rdev->notifier)->rwsem);
  lock(&ihid_goodix->regulator_mutex);

 *** DEADLOCK ***

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Fixes: 18eeef46d359 ("HID: i2c-hid: goodix: Tie the reset line to true state of the regulator")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: amd_sfh: Add illuminance mask to limit ALS max value

commit 91aaea527bc3b707c5d3208cde035421ed54f79c upstream.

ALS illuminance value present only in first 15 bits from SFH firmware
for V2 platforms. Hence added a mask of 15 bit to limit ALS max
illuminance values to get correct illuminance value.

Fixes: 0aad9c95eb9a ("HID: amd_sfh: Extend ALS support for newer AMD platform")
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: don't try to NUMA-migrate COW pages that have other uses

commit 80d47f5de5e311cbc0d01ebb6ee684e8f4c196c6 upstream.

Oded Gabbay reports that enabling NUMA balancing causes corruption with
his Gaudi accelerator test load:

 "All the details are in the bug, but the bottom line is that somehow,
  this patch causes corruption when the numa balancing feature is
  enabled AND we don't use process affinity AND we use GUP to pin pages
  so our accelerator can DMA to/from system memory.

  Either disabling numa balancing, using process affinity to bind to
  specific numa-node or reverting this patch causes the bug to
  disappear"

and Oded bisected the issue to commit 09854ba94c6a ("mm: do_wp_page()
simplification").

Now, the NUMA balancing shouldn't actually be changing the writability
of a page, and as such shouldn't matter for COW.  But it appears it
does.  Suspicious.

However, regardless of that, the condition for enabling NUMA faults in
change_pte_range() is nonsensical.  It uses "page_mapcount(page)" to
decide if a COW page should be NUMA-protected or not, and that makes
absolutely no sense.

The number of mappings a page has is irrelevant: not only does GUP get a
reference to a page as in Oded's case, but the other mappings migth be
paged out and the only reference to them would be in the page count.

Since we should never try to NUMA-balance a page that we can't move
anyway due to other references, just fix the code to use 'page_count()'.
Oded confirms that that fixes his issue.

Now, this does imply that something in NUMA balancing ends up changing
page protections (other than the obvious one of making the page
inaccessible to get the NUMA faulting information).  Otherwise the COW
simplification wouldn't matter - since doing the GUP on the page would
make sure it's writable.

The cause of that permission change would be good to figure out too,
since it clearly results in spurious COW events - but fixing the
nonsensical test that just happened to work before is obviously the
CorrectThing(tm) to do regardless.

Fixes: 09854ba94c6a ("mm: do_wp_page() simplification")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215616
Link: https://lore.kernel.org/all/CAFCwf10eNmwq2wD71xjUhqkvv5+_pJMR1nPug2RqNDcFT4H86Q@mail.gmail.com/
Reported-and-tested-by: Oded Gabbay <oded.gabbay@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: block: fix read single on recovery logic

commit 54309fde1a352ad2674ebba004a79f7d20b9f037 upstream.

On reads with MMC_READ_MULTIPLE_BLOCK that fail,
the recovery handler will use MMC_READ_SINGLE_BLOCK for
each of the blocks, up to MMC_READ_SINGLE_RETRIES times each.
The logic for this is fixed to never report unsuccessful reads
as success to the block layer.

On command error with retries remaining, blk_update_request was
called with whatever value error was set last to.
In case it was last set to BLK_STS_OK (default), the read will be
reported as success, even though there was no data read from the device.
This could happen on a CRC mismatch for the response,
a card rejecting the command (e.g. again due to a CRC mismatch).
In case it was last set to BLK_STS_IOERR, the error is reported correctly,
but no retries will be attempted.

Fixes: 81196976ed946c ("mmc: block: Add blk-mq support")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Loehle <cloehle@hyperstone.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/bc706a6ab08c4fe2834ba0c05a804672@hyperstone.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Fix sglist access in ccio-dma.c

commit d7da660cab47183cded65e11b64497d0f56c6edf upstream.

This patch implements the same bug fix to ccio-dma.c as to sba_iommu.c.
It ensures that only the allocated entries of the sglist are accessed.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Fix data TLB miss in sba_unmap_sg

commit b7d6f44a0fa716a82969725516dc0b16bc7cd514 upstream.

Rolf Eike Beer reported the following bug:

[1274934.746891] Bad Address (null pointer deref?): Code=15 (Data TLB miss fault) at addr 0000004140000018
[1274934.746891] CPU: 3 PID: 5549 Comm: cmake Not tainted 5.15.4-gentoo-parisc64 #4
[1274934.746891] Hardware name: 9000/785/C8000
[1274934.746891]
[1274934.746891]      YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
[1274934.746891] PSW: 00001000000001001111111000001110 Not tainted
[1274934.746891] r00-03  000000ff0804fe0e 0000000040bc9bc0 00000000406760e4 0000004140000000
[1274934.746891] r04-07  0000000040b693c0 0000004140000000 000000004a2b08b0 0000000000000001
[1274934.746891] r08-11  0000000041f98810 0000000000000000 000000004a0a7000 0000000000000001
[1274934.746891] r12-15  0000000040bddbc0 0000000040c0cbc0 0000000040bddbc0 0000000040bddbc0
[1274934.746891] r16-19  0000000040bde3c0 0000000040bddbc0 0000000040bde3c0 0000000000000007
[1274934.746891] r20-23  0000000000000006 000000004a368950 0000000000000000 0000000000000001
[1274934.746891] r24-27  0000000000001fff 000000000800000e 000000004a1710f0 0000000040b693c0
[1274934.746891] r28-31  0000000000000001 0000000041f988b0 0000000041f98840 000000004a171118
[1274934.746891] sr00-03  00000000066e5800 0000000000000000 0000000000000000 00000000066e5800
[1274934.746891] sr04-07  0000000000000000 0000000000000000 0000000000000000 0000000000000000
[1274934.746891]
[1274934.746891] IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000406760e8 00000000406760ec
[1274934.746891]  IIR: 48780030    ISR: 0000000000000000  IOR: 0000004140000018
[1274934.746891]  CPU:        3   CR30: 00000040e3a9c000 CR31: ffffffffffffffff
[1274934.746891]  ORIG_R28: 0000000040acdd58
[1274934.746891]  IAOQ[0]: sba_unmap_sg+0xb0/0x118
[1274934.746891]  IAOQ[1]: sba_unmap_sg+0xb4/0x118
[1274934.746891]  RP(r2): sba_unmap_sg+0xac/0x118
[1274934.746891] Backtrace:
[1274934.746891]  [<00000000402740cc>] dma_unmap_sg_attrs+0x6c/0x70
[1274934.746891]  [<000000004074d6bc>] scsi_dma_unmap+0x54/0x60
[1274934.746891]  [<00000000407a3488>] mptscsih_io_done+0x150/0xd70
[1274934.746891]  [<0000000040798600>] mpt_interrupt+0x168/0xa68
[1274934.746891]  [<0000000040255a48>] __handle_irq_event_percpu+0xc8/0x278
[1274934.746891]  [<0000000040255c34>] handle_irq_event_percpu+0x3c/0xd8
[1274934.746891]  [<000000004025ecb4>] handle_percpu_irq+0xb4/0xf0
[1274934.746891]  [<00000000402548e0>] generic_handle_irq+0x50/0x70
[1274934.746891]  [<000000004019a254>] call_on_stack+0x18/0x24
[1274934.746891]
[1274934.746891] Kernel panic - not syncing: Bad Address (null pointer deref?)

The bug is caused by overrunning the sglist and incorrectly testing
sg_dma_len(sglist) before nents. Normally this doesn't cause a crash,
but in this case sglist crossed a page boundary. This occurs in the
following code:

while (sg_dma_len(sglist) && nents--) {

The fix is simply to test nents first and move the decrement of nents
into the loop.

Reported-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Drop __init from map_pages declaration

commit 9129886b88185962538180625ca8051362b01327 upstream.

With huge kernel pages, we randomly eat a SPARC in map_pages(). This
is fixed by dropping __init from the declaration.

However, map_pages references the __init routine memblock_alloc_try_nid
via memblock_alloc.  Thus, it needs to be marked with __ref.

memblock_alloc is only called before the kernel text is set to readonly.

The __ref on free_initmem is no longer needed.

Comment regarding map_pages being in the init section is removed.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: parisc: GSC: fix build when IOSAPIC is not set

commit 6e8793674bb0d1135ca0e5c9f7e16fecbf815926 upstream.

There is a build error when using a kernel .config file from
'kernel test robot' for a different build problem:

hppa64-linux-ld: drivers/tty/serial/8250/8250_gsc.o: in function `.LC3':
(.data.rel.ro+0x18): undefined reference to `iosapic_serial_irq'

when:
  CONFIG_GSC=y
  CONFIG_SERIO_GSCPS2=y
  CONFIG_SERIAL_8250_GSC=y
  CONFIG_PCI is not set
    and hence PCI_LBA is not set.
  IOSAPIC depends on PCI_LBA, so IOSAPIC is not set/enabled.

Make the use of iosapic_serial_irq() conditional to fix the build error.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-parisc@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-serial@vger.kernel.org
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Johan Hovold <johan@kernel.org>
Suggested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Show error if wrong 32/64-bit compiler is being used

commit b160628e9ebcdc85d0db9d7f423c26b3c7c179d0 upstream.

It happens quite often that people use the wrong compiler to build the
kernel:

make ARCH=parisc   -> builds the 32-bit kernel
make ARCH=parisc64 -> builds the 64-bit kernel

This patch adds a sanity check which errors out with an instruction how
use the correct ARCH= option.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "svm: Add warning message for AVIC IPI invalid target"

commit dd4589eee99db8f61f7b8f7df1531cad3f74a64d upstream.

Remove a WARN on an "AVIC IPI invalid target" exit, the WARN is trivial
to trigger from guest as it will fail on any destination APIC ID that
doesn't exist from the guest's perspective.

Don't bother recording anything in the kernel log, the common tracepoint
for kvm_avic_incomplete_ipi() is sufficient for debugging.

This reverts commit 37ef0c4414c9743ba7f1af4392f0a27a99649f2a.

Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220204214205.3306634-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID:Add support for UGTABLET WP5540

commit fd5dd6acd8f823ea804f76d3af64fa1be9d5fb78 upstream.

This patch adds support for the UGTABLET WP5540 digitizer tablet
devices. Without it, the pen moves the cursor, but neither the
buttons nor the tap sensor in the tip do work.

Signed-off-by: Sergio Costas <rastersoft@gmail.com>
Link: https://lore.kernel.org/r/63dece1d-91ca-1b1b-d90d-335be66896be@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: lpfc: Fix mailbox command failure during driver initialization

commit efe1dc571a5b808baa26682eef16561be2e356fd upstream.

Contention for the mailbox interface may occur during driver initialization
(immediately after a function reset), between mailbox commands initiated
via ioctl (bsg) and those driver requested by the driver.

After setting SLI_ACTIVE flag for a port, there is a window in which the
driver will allow an ioctl to be initiated while the adapter is
initializing and issuing mailbox commands via polling. The polling logic
then gets confused.

Correct by having thread setting SLI_ACTIVE spot an active mailbox command
and allow it complete before proceeding.

Link: https://lore.kernel.org/r/20210921143008.64212-1-jsmart2021@gmail.com
Co-developed-by: Nigel Kirkland <nkirkland2304@gmail.com>
Signed-off-by: Nigel Kirkland <nkirkland2304@gmail.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: zoned: cache reported zone during mount

commit 16beac87e95e2fb278b552397c8260637f8a63f7 upstream.

When mounting a device, we are reporting the zones twice: once for
checking the zone attributes in btrfs_get_dev_zone_info and once for
loading block groups' zone info in
btrfs_load_block_group_zone_info(). With a lot of block groups, that
leads to a lot of REPORT ZONE commands and slows down the mount
process.

This patch introduces a zone info cache in struct
btrfs_zoned_device_info. The cache is populated while in
btrfs_get_dev_zone_info() and used for
btrfs_load_block_group_zone_info() to reduce the number of REPORT ZONE
commands. The zone cache is then released after loading the block
groups, as it will not be much effective during the run time.

Benchmark: Mount an HDD with 57,007 block groups
Before patch: 171.368 seconds
After patch: 64.064 seconds

While it still takes a minute due to the slowness of loading all the
block groups, the patch reduces the mount time by 1/3.

Link: https://lore.kernel.org/linux-btrfs/CAHQ7scUiLtcTqZOMMY5kbWUBOhGRwKo6J6wYPT5WY+C=cD49nQ@mail.gmail.com/
Fixes: 5b316468983d ("btrfs: get zone information of zoned block devices")
CC: stable@vger.kernel.org
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/proc: task_mmu.c: don't read mapcount for migration entry

commit 24d7275ce2791829953ed4e72f68277ceb2571c6 upstream.

The syzbot reported the below BUG:

  kernel BUG at include/linux/page-flags.h:785!
  invalid opcode: 0000 [#1] PREEMPT SMP KASAN
  CPU: 1 PID: 4392 Comm: syz-executor560 Not tainted 5.16.0-rc6-syzkaller #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
  RIP: 0010:PageDoubleMap include/linux/page-flags.h:785 [inline]
  RIP: 0010:__page_mapcount+0x2d2/0x350 mm/util.c:744
  Call Trace:
    page_mapcount include/linux/mm.h:837 [inline]
    smaps_account+0x470/0xb10 fs/proc/task_mmu.c:466
    smaps_pte_entry fs/proc/task_mmu.c:538 [inline]
    smaps_pte_range+0x611/0x1250 fs/proc/task_mmu.c:601
    walk_pmd_range mm/pagewalk.c:128 [inline]
    walk_pud_range mm/pagewalk.c:205 [inline]
    walk_p4d_range mm/pagewalk.c:240 [inline]
    walk_pgd_range mm/pagewalk.c:277 [inline]
    __walk_page_range+0xe23/0x1ea0 mm/pagewalk.c:379
    walk_page_vma+0x277/0x350 mm/pagewalk.c:530
    smap_gather_stats.part.0+0x148/0x260 fs/proc/task_mmu.c:768
    smap_gather_stats fs/proc/task_mmu.c:741 [inline]
    show_smap+0xc6/0x440 fs/proc/task_mmu.c:822
    seq_read_iter+0xbb0/0x1240 fs/seq_file.c:272
    seq_read+0x3e0/0x5b0 fs/seq_file.c:162
    vfs_read+0x1b5/0x600 fs/read_write.c:479
    ksys_read+0x12d/0x250 fs/read_write.c:619
    do_syscall_x64 arch/x86/entry/common.c:50 [inline]
    do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
    entry_SYSCALL_64_after_hwframe+0x44/0xae

The reproducer was trying to read /proc/$PID/smaps when calling
MADV_FREE at the mean time.  MADV_FREE may split THPs if it is called
for partial THP.  It may trigger the below race:

           CPU A                         CPU B
           -----                         -----
  smaps walk:                      MADV_FREE:
  page_mapcount()
    PageCompound()
                                   split_huge_page()
    page = compound_head(page)
    PageDoubleMap(page)

When calling PageDoubleMap() this page is not a tail page of THP anymore
so the BUG is triggered.

This could be fixed by elevated refcount of the page before calling
mapcount, but that would prevent it from counting migration entries, and
it seems overkilling because the race just could happen when PMD is
split so all PTE entries of tail pages are actually migration entries,
and smaps_account() does treat migration entries as mapcount == 1 as
Kirill pointed out.

Add a new parameter for smaps_account() to tell this entry is migration
entry then skip calling page_mapcount().  Don't skip getting mapcount
for device private entries since they do track references with mapcount.

Pagemap also has the similar issue although it was not reported.  Fixed
it as well.

[shy828301@gmail.com: v4]
Link: https://lkml.kernel.org/r/20220203182641.824731-1-shy828301@gmail.com
[nathan@kernel.org: avoid unused variable warning in pagemap_pmd_range()]
Link: https://lkml.kernel.org/r/20220207171049.1102239-1-nathan@kernel.org
Link: https://lkml.kernel.org/r/20220120202805.3369-1-shy828301@gmail.com
Fixes: e9b61f19858a ("thp: reintroduce split_huge_page()")
Signed-off-by: Yang Shi <shy828301@gmail.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: syzbot+1f52b3a18d5633fa7f82@syzkaller.appspotmail.com
Acked-by: David Hildenbrand <david@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Jann Horn <jannh@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/pmu/gm200-: use alternate falcon reset sequence

commit 4cdd2450bf739bada353e82d27b00db9af8c3001 upstream.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.15.24

Link: https://lore.kernel.org/r/20220214092506.354292783@linuxfoundation.org
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Slade Watkins <slade@sladewatkins.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu: Fix potential use-after-free during probe

commit b54240ad494300ff0994c4539a531727874381f4 upstream.

Kasan has reported the following use after free on dev->iommu.
when a device probe fails and it is in process of freeing dev->iommu
in dev_iommu_free function, a deferred_probe_work_func runs in parallel
and tries to access dev->iommu->fwspec in of_iommu_configure path thus
causing use after free.

BUG: KASAN: use-after-free in of_iommu_configure+0xb4/0x4a4
Read of size 8 at addr ffffff87a2f1acb8 by task kworker/u16:2/153

Workqueue: events_unbound deferred_probe_work_func
Call trace:
 dump_backtrace+0x0/0x33c
 show_stack+0x18/0x24
 dump_stack_lvl+0x16c/0x1e0
 print_address_description+0x84/0x39c
 __kasan_report+0x184/0x308
 kasan_report+0x50/0x78
 __asan_load8+0xc0/0xc4
 of_iommu_configure+0xb4/0x4a4
 of_dma_configure_id+0x2fc/0x4d4
 platform_dma_configure+0x40/0x5c
 really_probe+0x1b4/0xb74
 driver_probe_device+0x11c/0x228
 __device_attach_driver+0x14c/0x304
 bus_for_each_drv+0x124/0x1b0
 __device_attach+0x25c/0x334
 device_initial_probe+0x24/0x34
 bus_probe_device+0x78/0x134
 deferred_probe_work_func+0x130/0x1a8
 process_one_work+0x4c8/0x970
 worker_thread+0x5c8/0xaec
 kthread+0x1f8/0x220
 ret_from_fork+0x10/0x18

Allocated by task 1:
 ____kasan_kmalloc+0xd4/0x114
 __kasan_kmalloc+0x10/0x1c
 kmem_cache_alloc_trace+0xe4/0x3d4
 __iommu_probe_device+0x90/0x394
 probe_iommu_group+0x70/0x9c
 bus_for_each_dev+0x11c/0x19c
 bus_iommu_probe+0xb8/0x7d4
 bus_set_iommu+0xcc/0x13c
 arm_smmu_bus_init+0x44/0x130 [arm_smmu]
 arm_smmu_device_probe+0xb88/0xc54 [arm_smmu]
 platform_drv_probe+0xe4/0x13c
 really_probe+0x2c8/0xb74
 driver_probe_device+0x11c/0x228
 device_driver_attach+0xf0/0x16c
 __driver_attach+0x80/0x320
 bus_for_each_dev+0x11c/0x19c
 driver_attach+0x38/0x48
 bus_add_driver+0x1dc/0x3a4
 driver_register+0x18c/0x244
 __platform_driver_register+0x88/0x9c
 init_module+0x64/0xff4 [arm_smmu]
 do_one_initcall+0x17c/0x2f0
 do_init_module+0xe8/0x378
 load_module+0x3f80/0x4a40
 __se_sys_finit_module+0x1a0/0x1e4
 __arm64_sys_finit_module+0x44/0x58
 el0_svc_common+0x100/0x264
 do_el0_svc+0x38/0xa4
 el0_svc+0x20/0x30
 el0_sync_handler+0x68/0xac
 el0_sync+0x160/0x180

Freed by task 1:
 kasan_set_track+0x4c/0x84
 kasan_set_free_info+0x28/0x4c
 ____kasan_slab_free+0x120/0x15c
 __kasan_slab_free+0x18/0x28
 slab_free_freelist_hook+0x204/0x2fc
 kfree+0xfc/0x3a4
 __iommu_probe_device+0x284/0x394
 probe_iommu_group+0x70/0x9c
 bus_for_each_dev+0x11c/0x19c
 bus_iommu_probe+0xb8/0x7d4
 bus_set_iommu+0xcc/0x13c
 arm_smmu_bus_init+0x44/0x130 [arm_smmu]
 arm_smmu_device_probe+0xb88/0xc54 [arm_smmu]
 platform_drv_probe+0xe4/0x13c
 really_probe+0x2c8/0xb74
 driver_probe_device+0x11c/0x228
 device_driver_attach+0xf0/0x16c
 __driver_attach+0x80/0x320
 bus_for_each_dev+0x11c/0x19c
 driver_attach+0x38/0x48
 bus_add_driver+0x1dc/0x3a4
 driver_register+0x18c/0x244
 __platform_driver_register+0x88/0x9c
 init_module+0x64/0xff4 [arm_smmu]
 do_one_initcall+0x17c/0x2f0
 do_init_module+0xe8/0x378
 load_module+0x3f80/0x4a40
 __se_sys_finit_module+0x1a0/0x1e4
 __arm64_sys_finit_module+0x44/0x58
 el0_svc_common+0x100/0x264
 do_el0_svc+0x38/0xa4
 el0_svc+0x20/0x30
 el0_sync_handler+0x68/0xac
 el0_sync+0x160/0x180

Fix this by setting dev->iommu to NULL first and
then freeing dev_iommu structure in dev_iommu_free
function.

Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Vijayanand Jitta <quic_vjitta@quicinc.com>
Link: https://lore.kernel.org/r/1643613155-20215-1-git-send-email-quic_vjitta@quicinc.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf: Fix list corruption in perf_cgroup_switch()

commit 5f4e5ce638e6a490b976ade4a40017b40abb2da0 upstream.

There's list corruption on cgrp_cpuctx_list. This happens on the
following path:

  perf_cgroup_switch: list_for_each_entry(cgrp_cpuctx_list)
      cpu_ctx_sched_in
         ctx_sched_in
            ctx_pinned_sched_in
              merge_sched_in
                  perf_cgroup_event_disable: remove the event from the list

Use list_for_each_entry_safe() to allow removing an entry during
iteration.

Fixes: 058fe1c0440e ("perf/core: Make cgroup switch visit only cpuctxs with cgroup events")
Signed-off-by: Song Liu <song@kernel.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220204004057.2961252-1-song@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: imx8mq: fix lcdif port node

commit 91f6d5f181f6629dd74ab71759fe92d3f4eff966 upstream.

The port node does not have a unit-address, remove it.
This fixes the warnings:
lcd-controller@30320000: 'port' is a required property
lcd-controller@30320000: 'port@0' does not match any of the regexes:
'pinctrl-[0-9]+'

Fixes: commit d0081bd02a03 ("arm64: dts: imx8mq: Add NWL MIPI DSI controller")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: octeon: Fix missed PTR->PTR_WD conversion

commit 50317b636e7184d15126e2dfc83db0963a38d31e upstream.

Fixes: fa62f39dc7e2 ("MIPS: Fix build error due to PTR used in more places")
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: lpfc: Reduce log messages seen after firmware download

commit 5852ed2a6a39c862c8a3fdf646e1f4e01b91d710 upstream.

Messages around firmware download were incorrectly tagged as being related
to discovery trace events. Thus, firmware download status ended up dumping
the trace log as well as the firmware update message. As there were a
couple of log messages in this state, the trace log was dumped multiple
times.

Resolve this by converting from trace events to SLI events.

Link: https://lore.kernel.org/r/20220207180442.72836-1-jsmart2021@gmail.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: lpfc: Remove NVMe support if kernel has NVME_FC disabled

commit c80b27cfd93ba9f5161383f798414609e84729f3 upstream.

The driver is initiating NVMe PRLIs to determine device NVMe support.  This
should not be occurring if CONFIG_NVME_FC support is disabled.

Correct this by changing the default value for FC4 support. Currently it
defaults to FCP and NVMe. With change, when NVME_FC support is not enabled
in the kernel, the default value is just FCP.

Link: https://lore.kernel.org/r/20220207180516.73052-1-jsmart2021@gmail.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Makefile.extrawarn: Move -Wunaligned-access to W=1

commit 1cf5f151d25fcca94689efd91afa0253621fb33a upstream.

-Wunaligned-access is a new warning in clang that is default enabled for
arm and arm64 under certain circumstances within the clang frontend (see
LLVM commit below). On v5.17-rc2, an ARCH=arm allmodconfig build shows
1284 total/70 unique instances of this warning (most of the instances
are in header files), which is quite noisy.

To keep a normal build green through CONFIG_WERROR, only show this
warning with W=1, which will allow automated build systems to catch new
instances of the warning so that the total number can be driven down to
zero eventually since catching unaligned accesses at compile time would
be generally useful.

Cc: stable@vger.kernel.org
Link: https://github.com/llvm/llvm-project/commit/35737df4dcd28534bd3090157c224c19b501278a
Link: https://github.com/ClangBuiltLinux/linux/issues/1569
Link: https://github.com/ClangBuiltLinux/linux/issues/1576
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/sgx: Silence softlockup detection when releasing large enclaves

commit 8795359e35bc33bf86b6d0765aa7f37431db3b9c upstream.

Vijay reported that the "unclobbered_vdso_oversubscribed" selftest
triggers the softlockup detector.

Actual SGX systems have 128GB of enclave memory or more.  The
"unclobbered_vdso_oversubscribed" selftest creates one enclave which
consumes all of the enclave memory on the system. Tearing down such a
large enclave takes around a minute, most of it in the loop where
the EREMOVE instruction is applied to each individual 4k enclave page.

Spending one minute in a loop triggers the softlockup detector.

Add a cond_resched() to give other tasks a chance to run and placate
the softlockup detector.

Cc: stable@vger.kernel.org
Fixes: 1728ab54b4be ("x86/sgx: Add a page reclaimer")
Reported-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org> (kselftest as sanity check)
Link: https://lkml.kernel.org/r/ced01cac1e75f900251b0a4ae1150aa8ebd295ec.1644345232.git.reinette.chatre@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (dell-smm) Speed up setting of fan speed

commit c0d79987a0d82671bff374c07f2201f9bdf4aaa2 upstream.

When setting the fan speed, i8k_set_fan() calls i8k_get_fan_status(),
causing an unnecessary SMM call since from the two users of this
function, only i8k_ioctl_unlocked() needs to know the new fan status
while dell_smm_write() ignores the new fan status.
Since SMM calls can be very slow while also making error reporting
difficult for dell_smm_write(), remove the function call from
i8k_set_fan() and call it separately in i8k_ioctl_unlocked().

Tested on a Dell Inspiron 3505.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20211021190531.17379-6-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: mhi: pci_generic: Add mru_default for Cinterion MV31-W

commit 05daa805a86c831ad9692f6f15e1b877c8f10638 upstream.

For default mechanism, product would use default MRU 3500 if
they didn't define it. But for Cinterion MV31-W, there is a known
issue which MRU 3500 would lead to data connection lost.
So we align it with Qualcomm default MRU settings.

Link: https://lore.kernel.org/r/20220119102519.5342-1-slark_xiao@163.com
[mani: Modified the commit message to reflect Cinterion MV31-W and CCed stable]
Fixes: 87693e092bd0 ("bus: mhi: pci_generic: Add Cinterion MV31-W PCIe to MHI")
Cc: stable@vger.kernel.org # v5.14 +
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220205135731.157871-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: mhi: pci_generic: Add mru_default for Foxconn SDX55

commit a0572cea8866230ac13da6358c88075f89e99b20 upstream.

For default mechanism, product would use default MRU 3500 if
they didn't define it. But for Foxconn SDX55, there is a known
issue which MRU 3500 would lead to data connection lost.
So we align it with Qualcomm default MRU settings.

Link: https://lore.kernel.org/r/20220119101213.5008-1-slark_xiao@163.com
[mani: Added pci_generic prefix to subject and CCed stable]
Fixes: aac426562f56 ("bus: mhi: pci_generic: Introduce Foxconn T99W175 support")
Cc: stable@vger.kernel.org # v5.12+
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220205135731.157871-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/cio: verify the driver availability for path_event call

commit dd9cb842fa9d90653a9b48aba52f89c069f3bc50 upstream.

If no driver is attached to a device or the driver does not provide the
path_event function, an FCES path-event on this device could end up in a
kernel-panic. Verify the driver availability before the path_event
function call.

Fixes: 32ef938815c1 ("s390/cio: Add support for FCES status notification")
Cc: stable@vger.kernel.org
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Suggested-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

signal: HANDLER_EXIT should clear SIGNAL_UNKILLABLE

commit 5c72263ef2fbe99596848f03758ae2dc593adf2c upstream.

Fatal SIGSYS signals (i.e. seccomp RET_KILL_* syscall filter actions)
were not being delivered to ptraced pid namespace init processes. Make
sure the SIGNAL_UNKILLABLE doesn't get set for these cases.

Reported-by: Robert Święcki <robert@swiecki.net>
Suggested-by: "Eric W. Biederman" <ebiederm@xmission.com>
Fixes: 00b06da29cf9 ("signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Link: https://lore.kernel.org/lkml/878rui8u4a.fsf@email.froward.int.ebiederm.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

seccomp: Invalidate seccomp mode to catch death failures

commit 495ac3069a6235bfdf516812a2a9b256671bbdf9 upstream.

If seccomp tries to kill a process, it should never see that process
again. To enforce this proactively, switch the mode to something
impossible. If encountered: WARN, reject all syscalls, and attempt to
kill the process again even harder.

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Fixes: 8112c4f140fa ("seccomp: remove 2-phase API")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: memcg: synchronize objcg lists with a dedicated spinlock

commit 0764db9b49c932b89ee4d9e3236dff4bb07b4a66 upstream.

Alexander reported a circular lock dependency revealed by the mmap1 ltp
test:

  LOCKDEP_CIRCULAR (suite: ltp, case: mtest06 (mmap1))
          WARNING: possible circular locking dependency detected
          5.17.0-20220113.rc0.git0.f2211f194038.300.fc35.s390x+debug #1 Not tainted
          ------------------------------------------------------
          mmap1/202299 is trying to acquire lock:
          00000001892c0188 (css_set_lock){..-.}-{2:2}, at: obj_cgroup_release+0x4a/0xe0
          but task is already holding lock:
          00000000ca3b3818 (&sighand->siglock){-.-.}-{2:2}, at: force_sig_info_to_task+0x38/0x180
          which lock already depends on the new lock.
          the existing dependency chain (in reverse order) is:
          -> #1 (&sighand->siglock){-.-.}-{2:2}:
                 __lock_acquire+0x604/0xbd8
                 lock_acquire.part.0+0xe2/0x238
                 lock_acquire+0xb0/0x200
                 _raw_spin_lock_irqsave+0x6a/0xd8
                 __lock_task_sighand+0x90/0x190
                 cgroup_freeze_task+0x2e/0x90
                 cgroup_migrate_execute+0x11c/0x608
                 cgroup_update_dfl_csses+0x246/0x270
                 cgroup_subtree_control_write+0x238/0x518
                 kernfs_fop_write_iter+0x13e/0x1e0
                 new_sync_write+0x100/0x190
                 vfs_write+0x22c/0x2d8
                 ksys_write+0x6c/0xf8
                 __do_syscall+0x1da/0x208
                 system_call+0x82/0xb0
          -> #0 (css_set_lock){..-.}-{2:2}:
                 check_prev_add+0xe0/0xed8
                 validate_chain+0x736/0xb20
                 __lock_acquire+0x604/0xbd8
                 lock_acquire.part.0+0xe2/0x238
                 lock_acquire+0xb0/0x200
                 _raw_spin_lock_irqsave+0x6a/0xd8
                 obj_cgroup_release+0x4a/0xe0
                 percpu_ref_put_many.constprop.0+0x150/0x168
                 drain_obj_stock+0x94/0xe8
                 refill_obj_stock+0x94/0x278
                 obj_cgroup_charge+0x164/0x1d8
                 kmem_cache_alloc+0xac/0x528
                 __sigqueue_alloc+0x150/0x308
                 __send_signal+0x260/0x550
                 send_signal+0x7e/0x348
                 force_sig_info_to_task+0x104/0x180
                 force_sig_fault+0x48/0x58
                 __do_pgm_check+0x120/0x1f0
                 pgm_check_handler+0x11e/0x180
          other info that might help us debug this:
           Possible unsafe locking scenario:
                 CPU0                    CPU1
                 ----                    ----
            lock(&sighand->siglock);
                                         lock(css_set_lock);
                                         lock(&sighand->siglock);
            lock(css_set_lock);
           *** DEADLOCK ***
          2 locks held by mmap1/202299:
           #0: 00000000ca3b3818 (&sighand->siglock){-.-.}-{2:2}, at: force_sig_info_to_task+0x38/0x180
           #1: 00000001892ad560 (rcu_read_lock){....}-{1:2}, at: percpu_ref_put_many.constprop.0+0x0/0x168
          stack backtrace:
          CPU: 15 PID: 202299 Comm: mmap1 Not tainted 5.17.0-20220113.rc0.git0.f2211f194038.300.fc35.s390x+debug #1
          Hardware name: IBM 3906 M04 704 (LPAR)
          Call Trace:
            dump_stack_lvl+0x76/0x98
            check_noncircular+0x136/0x158
            check_prev_add+0xe0/0xed8
            validate_chain+0x736/0xb20
            __lock_acquire+0x604/0xbd8
            lock_acquire.part.0+0xe2/0x238
            lock_acquire+0xb0/0x200
            _raw_spin_lock_irqsave+0x6a/0xd8
            obj_cgroup_release+0x4a/0xe0
            percpu_ref_put_many.constprop.0+0x150/0x168
            drain_obj_stock+0x94/0xe8
            refill_obj_stock+0x94/0x278
            obj_cgroup_charge+0x164/0x1d8
            kmem_cache_alloc+0xac/0x528
            __sigqueue_alloc+0x150/0x308
            __send_signal+0x260/0x550
            send_signal+0x7e/0x348
            force_sig_info_to_task+0x104/0x180
            force_sig_fault+0x48/0x58
            __do_pgm_check+0x120/0x1f0
            pgm_check_handler+0x11e/0x180
          INFO: lockdep is turned off.

In this example a slab allocation from __send_signal() caused a
refilling and draining of a percpu objcg stock, resulted in a releasing
of another non-related objcg.  Objcg release path requires taking the
css_set_lock, which is used to synchronize objcg lists.

This can create a circular dependency with the sighandler lock, which is
taken with the locked css_set_lock by the freezer code (to freeze a
task).

In general it seems that using css_set_lock to synchronize objcg lists
makes any slab allocations and deallocation with the locked css_set_lock
and any intervened locks risky.

To fix the problem and make the code more robust let's stop using
css_set_lock to synchronize objcg lists and use a new dedicated spinlock
instead.

Link: https://lkml.kernel.org/r/Yfm1IHmoGdyUR81T@carbon.dhcp.thefacebook.com
Fixes: bf4f059954dc ("mm: memcg/slab: obj_cgroup API")
Signed-off-by: Roman Gushchin <guro@fb.com>
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Tested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: buffer: Fix file related error handling in IIO_BUFFER_GET_FD_IOCTL

commit c72ea20503610a4a7ba26c769357d31602769c01 upstream.

If we fail to copy the just created file descriptor to userland, we
try to clean up by putting back 'fd' and freeing 'ib'. The code uses
put_unused_fd() for the former which is wrong, as the file descriptor
was already published by fd_install() which gets called internally by
anon_inode_getfd().

This makes the error handling code leaving a half cleaned up file
descriptor table around and a partially destructed 'file' object,
allowing userland to play use-after-free tricks on us, by abusing
the still usable fd and making the code operate on a dangling
'file->private_data' pointer.

Instead of leaving the kernel in a partially corrupted state, don't
attempt to explicitly clean up and leave this to the process exit
path that'll release any still valid fds, including the one created
by the previous call to anon_inode_getfd(). Simply return -EFAULT to
indicate the error.

Fixes: f73f7f4da581 ("iio: buffer: add ioctl() to support opening extra buffers for IIO device")
Cc: stable@kernel.org
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Alexandru Ardelean <ardeleanalex@gmail.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Nuno Sa <Nuno.Sa@analog.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phy: ti: Fix missing sentinel for clk_div_table

commit 6d1e6bcb31663ee83aaea1f171f3dbfe95dd4a69 upstream.

_get_table_maxdiv() tries to access "clk_div_table" array out of bound
defined in phy-j721e-wiz.c. Add a sentinel entry to prevent
the following global-out-of-bounds error reported by enabling KASAN.

[    9.552392] BUG: KASAN: global-out-of-bounds in _get_maxdiv+0xc0/0x148
[    9.558948] Read of size 4 at addr ffff8000095b25a4 by task kworker/u4:1/38
[    9.565926]
[    9.567441] CPU: 1 PID: 38 Comm: kworker/u4:1 Not tainted 5.16.0-116492-gdaadb3bd0e8d-dirty #360
[    9.576242] Hardware name: Texas Instruments J721e EVM (DT)
[    9.581832] Workqueue: events_unbound deferred_probe_work_func
[    9.587708] Call trace:
[    9.590174]  dump_backtrace+0x20c/0x218
[    9.594038]  show_stack+0x18/0x68
[    9.597375]  dump_stack_lvl+0x9c/0xd8
[    9.601062]  print_address_description.constprop.0+0x78/0x334
[    9.606830]  kasan_report+0x1f0/0x260
[    9.610517]  __asan_load4+0x9c/0xd8
[    9.614030]  _get_maxdiv+0xc0/0x148
[    9.617540]  divider_determine_rate+0x88/0x488
[    9.622005]  divider_round_rate_parent+0xc8/0x124
[    9.626729]  wiz_clk_div_round_rate+0x54/0x68
[    9.631113]  clk_core_determine_round_nolock+0x124/0x158
[    9.636448]  clk_core_round_rate_nolock+0x68/0x138
[    9.641260]  clk_core_set_rate_nolock+0x268/0x3a8
[    9.645987]  clk_set_rate+0x50/0xa8
[    9.649499]  cdns_sierra_phy_init+0x88/0x248
[    9.653794]  phy_init+0x98/0x108
[    9.657046]  cdns_pcie_enable_phy+0xa0/0x170
[    9.661340]  cdns_pcie_init_phy+0x250/0x2b0
[    9.665546]  j721e_pcie_probe+0x4b8/0x798
[    9.669579]  platform_probe+0x8c/0x108
[    9.673350]  really_probe+0x114/0x630
[    9.677037]  __driver_probe_device+0x18c/0x220
[    9.681505]  driver_probe_device+0xac/0x150
[    9.685712]  __device_attach_driver+0xec/0x170
[    9.690178]  bus_for_each_drv+0xf0/0x158
[    9.694124]  __device_attach+0x184/0x210
[    9.698070]  device_initial_probe+0x14/0x20
[    9.702277]  bus_probe_device+0xec/0x100
[    9.706223]  deferred_probe_work_func+0x124/0x180
[    9.710951]  process_one_work+0x4b0/0xbc0
[    9.714983]  worker_thread+0x74/0x5d0
[    9.718668]  kthread+0x214/0x230
[    9.721919]  ret_from_fork+0x10/0x20
[    9.725520]
[    9.727032] The buggy address belongs to the variable:
[    9.732183]  clk_div_table+0x24/0x440

Fixes: 091876cc355d ("phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20220117110108.4117-1-kishon@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

speakup-dectlk: Restore pitch setting

commit bca828ccdd6548d24613d0cede04ada4dfb2f89c upstream.

d97a9d7aea04 ("staging/speakup: Add inflection synth parameter")
introduced the inflection parameter, but happened to drop the pitch
parameter from the dectlk driver. This restores it.

Cc: stable@vger.kernel.org
Fixes: d97a9d7aea04 ("staging/speakup: Add inflection synth parameter")
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/20220206015626.aesbhvvdkmqsrbaw@begin
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: cp210x: add CPI Bulk Coin Recycler id

commit 6ca0c6283340d819bf9c7d8e76be33c9fbd903ab upstream.

Add the device id for the Crane Payment Innovation / Money Controls Bulk
Coin Recycler:

https://www.cranepi.com/en/system/files/Support/OM_BCR_EN_V1-04_0.pdf

Reported-by: Scott Russell <Scott.Russell2@ncr.com>
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: cp210x: add NCR Retail IO box id

commit b50f8f09c622297d3cf46e332e17ba8adedec9af upstream.

Add the device id for NCR's Retail IO box (CP2105) used in NCR FastLane
SelfServ Checkout - R6C:

https://www.ncr.com/product-catalog/ncr-fastlane-selfserv-checkout-r6c

Reported-by: Scott Russell <Scott.Russell2@ncr.com>
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ch341: add support for GW Instek USB2.0-Serial devices

commit fa77ce201f7f2d823b07753575122d1ae5597fbe upstream.

Programmable lab power supplies made by GW Instek, such as the
GPP-2323, have a USB port exposing a serial port to control the device.

Stringing the supplied Windows driver, references to the ch341 chip are
found. Binding the existing ch341 driver to the VID/PID of the GPP-2323
("GW Instek USB2.0-Serial" as per the USB product name) works out of the
box, communication and control is now possible.

This patch should work with any GPP series power supply due to
similarities in the product line.

Signed-off-by: Stephan Brunner <s.brunner@stephan-brunner.net>
Link: https://lore.kernel.org/r/4a47b864-0816-6f6a-efee-aa20e74bcdc6@stephan-brunner.net
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: add ZTE MF286D modem

commit d48384c7ed6c8fe4727eaa0f3048f62afd1cd715 upstream.

Modem from ZTE MF286D is an Qualcomm MDM9250 based 3G/4G modem.

T:  Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=5000 MxCh= 0
D:  Ver= 3.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=19d2 ProdID=1485 Rev=52.87
S:  Manufacturer=ZTE,Incorporated
S:  Product=ZTE Technologies MSM
S:  SerialNumber=MF286DZTED000000
C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=896mA
A:  FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=ff Driver=rndis_host
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E:  Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=88(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E:  Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=89(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ftdi_sio: add support for Brainboxes US-159/235/320

commit fbb9b194e15a63c56c5664e76ccd0e85c6100cea upstream.

This patch adds support for the Brainboxes US-159, US-235 and US-320
USB-to-Serial devices.

Signed-off-by: Cameron Williams <cang1@live.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: raw-gadget: fix handling of dual-direction-capable endpoints

commit 292d2c82b105d92082c2120a44a58de9767e44f1 upstream.

Under dummy_hcd, every available endpoint is *either* IN or OUT capable.
But with some real hardware, there are endpoints that support both IN and
OUT. In particular, the PLX 2380 has four available endpoints that each
support both IN and OUT.

raw-gadget currently gets confused and thinks that any endpoint that is
usable as an IN endpoint can never be used as an OUT endpoint.

Fix it by looking at the direction in the configured endpoint descriptor
instead of looking at the hardware capabilities.

With this change, I can use the PLX 2380 with raw-gadget.

Fixes: f2c2e717642c ("usb: gadget: add raw-gadget interface")
Cc: stable <stable@vger.kernel.org>
Tested-by: Andrey Konovalov <andreyknvl@gmail.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20220126205214.2149936-1-jannh@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: f_uac2: Define specific wTerminalType

commit 5432184107cd0013761bdfa6cb6079527ef87b95 upstream.

Several users have reported that their Win10 does not enumerate UAC2
gadget with the existing wTerminalType set to
UAC_INPUT_TERMINAL_UNDEFINED/UAC_INPUT_TERMINAL_UNDEFINED, e.g.
https://github.com/raspberrypi/linux/issues/4587#issuecomment-926567213.
While the constant is officially defined by the USB terminal types
document, e.g. XMOS firmware for UAC2 (commonly used for Win10) defines
no undefined output terminal type in its usbaudio20.h header.

Therefore wTerminalType of EP-IN is set to
UAC_INPUT_TERMINAL_MICROPHONE and wTerminalType of EP-OUT to
UAC_OUTPUT_TERMINAL_SPEAKER for the UAC2 gadget.

Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220131071813.7433-1-pavel.hofman@ivitera.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: rndis: check size of RNDIS_MSG_SET command

commit 38ea1eac7d88072bbffb630e2b3db83ca649b826 upstream.

Check the size of the RNDIS_MSG_SET command given to us before
attempting to respond to an invalid message size.

Reported-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Cc: stable@kernel.org
Tested-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: gadget: validate interface OS descriptor requests

commit 75e5b4849b81e19e9efe1654b30d7f3151c33c2c upstream.

Stall the control endpoint in case provided index exceeds array size of
MAX_CONFIG_INTERFACES or when the retrieved function pointer is null.

Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: udc: renesas_usb3: Fix host to USB_ROLE_NONE transition

commit 459702eea6132888b5c5b64c0e9c626da4ec2493 upstream.

The support the external role switch a variety of situations were
addressed, but the transition from USB_ROLE_HOST to USB_ROLE_NONE
leaves the host up which can cause some error messages when
switching from host to none, to gadget, to none, and then back
to host again.

 xhci-hcd ee000000.usb: Abort failed to stop command ring: -110
 xhci-hcd ee000000.usb: xHCI host controller not responding, assume dead
 xhci-hcd ee000000.usb: HC died; cleaning up
 usb 4-1: device not accepting address 6, error -108
 usb usb4-port1: couldn't allocate usb_device

After this happens it will not act as a host again.
Fix this by releasing the host mode when transitioning to USB_ROLE_NONE.

Fixes: 0604160d8c0b ("usb: gadget: udc: renesas_usb3: Enhance role switch support")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20220128223603.2362621-1-aford173@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: gadget: Prevent core from processing stale TRBs

commit 117b4e96c7f362eb6459543883fc07f77662472c upstream.

With CPU re-ordering on write instructions, there might
be a chance that the HWO is set before the TRB is updated
with the new mapped buffer address.
And in the case where core is processing a list of TRBs
it is possible that it fetched the TRBs when the HWO is set
but before the buffer address is updated.
Prevent this by adding a memory barrier before the HWO
is updated to ensure that the core always process the
updated TRBs.

Fixes: f6bafc6a1c9d ("usb: dwc3: convert TRBs into bitshifts")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Signed-off-by: Udipto Goswami <quic_ugoswami@quicinc.com>
Link: https://lore.kernel.org/r/1644207958-18287-1-git-send-email-quic_ugoswami@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: ulpi: Call of_node_put correctly

commit 0a907ee9d95e3ac35eb023d71f29eae0aaa52d1b upstream.

of_node_put should always be called on device nodes gotten from
of_get_*. Additionally, it should only be called after there are no
remaining users. To address the first issue, call of_node_put if later
steps in ulpi_register fail. To address the latter, call put_device if
device_register fails, which will call ulpi_dev_release if necessary.

Fixes: ef6a7bcfb01c ("usb: ulpi: Support device discovery via DT")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Link: https://lore.kernel.org/r/20220127190004.1446909-3-sean.anderson@seco.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: ulpi: Move of_node_put to ulpi_dev_release

commit 092f45b13e51666fe8ecbf2d6cd247aa7e6c1f74 upstream.

Drivers are not unbound from the device when ulpi_unregister_interface
is called. Move of_node-freeing code to ulpi_dev_release which is called
only after all users are gone.

Fixes: ef6a7bcfb01c ("usb: ulpi: Support device discovery via DT")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Link: https://lore.kernel.org/r/20220127190004.1446909-2-sean.anderson@seco.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: usb: ax88179_178a: Fix out-of-bounds accesses in RX fixup

commit 57bc3d3ae8c14df3ceb4e17d26ddf9eeab304581 upstream.

ax88179_rx_fixup() contains several out-of-bounds accesses that can be
triggered by a malicious (or defective) USB device, in particular:

 - The metadata array (hdr_off..hdr_off+2*pkt_cnt) can be out of bounds,
   causing OOB reads and (on big-endian systems) OOB endianness flips.
 - A packet can overlap the metadata array, causing a later OOB
   endianness flip to corrupt data used by a cloned SKB that has already
   been handed off into the network stack.
 - A packet SKB can be constructed whose tail is far beyond its end,
   causing out-of-bounds heap data to be considered part of the SKB's
   data.

I have tested that this can be used by a malicious USB device to send a
bogus ICMPv6 Echo Request and receive an ICMPv6 Echo Reply in response
that contains random kernel heap data.
It's probably also possible to get OOB writes from this on a
little-endian system somehow - maybe by triggering skb_cow() via IP
options processing -, but I haven't tested that.

Fixes: e2ca90c276e1 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver")
Cc: stable@kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "usb: dwc2: drd: fix soft connect when gadget is unconfigured"

commit 736e8d89044c1c330967fb938fa766cd9e0d8af0 upstream.

This reverts commit 269cbcf7b72de6f0016806d4a0cec1d689b55a87.

It causes build errors as reported by the kernel test robot.

Link: https://lore.kernel.org/r/202202112236.AwoOTtHO-lkp@intel.com
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 269cbcf7b72d ("usb: dwc2: drd: fix soft connect when gadget is unconfigured")
Cc: stable@kernel.org
Cc: Amelie Delaunay <amelie.delaunay@foss.st.com>
Cc: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Cc: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc2: drd: fix soft connect when gadget is unconfigured

commit 269cbcf7b72de6f0016806d4a0cec1d689b55a87 upstream.

When the gadget driver hasn't been (yet) configured, and the cable is
connected to a HOST, the SFTDISCON gets cleared unconditionally, so the
HOST tries to enumerate it.
At the host side, this can result in a stuck USB port or worse. When
getting lucky, some dmesg can be observed at the host side:
 new high-speed USB device number ...
 device descriptor read/64, error -110

Fix it in drd, by checking the enabled flag before calling
dwc2_hsotg_core_connect(). It will be called later, once configured,
by the normal flow:
- udc_bind_to_driver
 - usb_gadget_connect
   - dwc2_hsotg_pullup
     - dwc2_hsotg_core_connect

Fixes: 17f934024e84 ("usb: dwc2: override PHY input signals with usb role switch support")
Cc: stable@kernel.org
Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/1644423353-17859-1-git-send-email-fabrice.gasnier@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

eeprom: ee1004: limit i2c reads to I2C_SMBUS_BLOCK_MAX

commit c0689e46be23160d925dca95dfc411f1a0462708 upstream.

Commit effa453168a7 ("i2c: i801: Don't silently correct invalid transfer
size") revealed that ee1004_eeprom_read() did not properly limit how
many bytes to read at once.

In particular, i2c_smbus_read_i2c_block_data_or_emulated() takes the
length to read as an u8.  If count == 256 after taking into account the
offset and page boundary, the cast to u8 overflows.  And this is common
when user space tries to read the entire EEPROM at once.

To fix it, limit each read to I2C_SMBUS_BLOCK_MAX (32) bytes, already
the maximum length i2c_smbus_read_i2c_block_data_or_emulated() allows.

Fixes: effa453168a7 ("i2c: i801: Don't silently correct invalid transfer size")
Cc: stable@vger.kernel.org
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jonas Malaco <jonas@protocubo.io>
Link: https://lore.kernel.org/r/20220203165024.47767-1-jonas@protocubo.io
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

n_tty: wake up poll(POLLRDNORM) on receiving data

commit c816b2e65b0e86b95011418cad334f0524fc33b8 upstream.

The poll man page says POLLRDNORM is equivalent to POLLIN when used as
an event.
$ man poll
<snip>
              POLLRDNORM
                     Equivalent to POLLIN.

However, in n_tty driver, POLLRDNORM does not return until timeout even
if there is terminal input, whereas POLLIN returns.

The following test program works until kernel-3.17, but the test stops
in poll() after commit 57087d515441 ("tty: Fix spurious poll() wakeups").

[Steps to run test program]
  $ cc -o test-pollrdnorm test-pollrdnorm.c
  $ ./test-pollrdnorm
  foo          <-- Type in something from the terminal followed by [RET].
                   The string should be echoed back.

  ------------------------< test-pollrdnorm.c >------------------------
  #include <stdio.h>
  #include <errno.h>
  #include <poll.h>
  #include <unistd.h>

  void main(void)
  {
int n;
unsigned char buf[8];
struct pollfd fds[1] = {{ 0, POLLRDNORM, 0 }};

n = poll(fds, 1, -1);
if (n < 0)
perror("poll");
n = read(0, buf, 8);
if (n < 0)
perror("read");
if (n > 0)
write(1, buf, n);
  }
  ------------------------------------------------------------------------

The attached patch fixes this problem.  Many calls to
wake_up_interruptible_poll() in the kernel source code already specify
"POLLIN | POLLRDNORM".

Fixes: 57087d515441 ("tty: Fix spurious poll() wakeups")
Cc: stable@vger.kernel.org
Signed-off-by: Kosuke Tatsukawa <tatsu-ab1@nec.com>
Link: https://lore.kernel.org/r/TYCPR01MB81901C0F932203D30E452B3EA5209@TYCPR01MB8190.jpnprd01.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vt_ioctl: add array_index_nospec to VT_ACTIVATE

commit 28cb138f559f8c1a1395f5564f86b8bbee83631b upstream.

in vt_setactivate an almost identical code path has been patched
with array_index_nospec. In the VT_ACTIVATE path the user input
is from a system call argument instead of a usercopy.
For consistency both code paths should have the same mitigations
applied.

Kasper Acknowledgements: Jakob Koschel, Brian Johannesmeyer, Kaveh
Razavi, Herbert Bos, Cristiano Giuffrida from the VUSec group at VU
Amsterdam.

Co-developed-by: Brian Johannesmeyer <bjohannesmeyer@gmail.com>
Signed-off-by: Brian Johannesmeyer <bjohannesmeyer@gmail.com>
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Link: https://lore.kernel.org/r/20220127144406.3589293-2-jakobkoschel@gmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vt_ioctl: fix array_index_nospec in vt_setactivate

commit 61cc70d9e8ef5b042d4ed87994d20100ec8896d9 upstream.

array_index_nospec ensures that an out-of-bounds value is set to zero
on the transient path. Decreasing the value by one afterwards causes
a transient integer underflow. vsa.console should be decreased first
and then sanitized with array_index_nospec.

Kasper Acknowledgements: Jakob Koschel, Brian Johannesmeyer, Kaveh
Razavi, Herbert Bos, Cristiano Giuffrida from the VUSec group at VU
Amsterdam.

Co-developed-by: Brian Johannesmeyer <bjohannesmeyer@gmail.com>
Signed-off-by: Brian Johannesmeyer <bjohannesmeyer@gmail.com>
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Link: https://lore.kernel.org/r/20220127144406.3589293-1-jakobkoschel@gmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: mv88e6xxx: fix use-after-free in mv88e6xxx_mdios_unregister

[ Upstream commit 51a04ebf21122d5c76a716ecd9bfc33ea44b2b39 ]

Since struct mv88e6xxx_mdio_bus *mdio_bus is the bus->priv of something
allocated with mdiobus_alloc_size(), this means that mdiobus_free(bus)
will free the memory backing the mdio_bus as well. Therefore, the
mdio_bus->list element is freed memory, but we continue to iterate
through the list of MDIO buses using that list element.

To fix this, use the proper list iterator that handles element deletion
by keeping a copy of the list element next pointer.

Fixes: f53a2ce893b2 ("net: dsa: mv88e6xxx: don't use devres for mdiobus")
Reported-by: Rafael Richter <rafael.richter@gin.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220210174017.3271099-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: mscc: ocelot: fix mutex lock error during ethtool stats read

[ Upstream commit 7fbf6795d127a3b1bb39b0e42579904cf6db1624 ]

An ongoing workqueue populates the stats buffer. At the same time, a user
might query the statistics. While writing to the buffer is mutex-locked,
reading from the buffer wasn't. This could lead to buggy reads by ethtool.

This patch fixes the former blamed commit, but the bug was introduced in
the latter.

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Fixes: 1e1caa9735f90 ("ocelot: Clean up stats update deferred work")
Fixes: a556c76adc052 ("net: mscc: Add initial Ocelot switch support")
Reported-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/all/20220210150451.416845-2-colin.foster@in-advantage.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: Avoid RTNL lock when re-creating auxiliary device

[ Upstream commit 5dbbbd01cbba831233c6ea9a3e6bfa133606d3c0 ]

If a call to re-create the auxiliary device happens in a context that has
already taken the RTNL lock, then the call flow that recreates auxiliary
device can hang if there is another attempt to claim the RTNL lock by the
auxiliary driver.

To avoid this, any call to re-create auxiliary devices that comes from
an source that is holding the RTNL lock (e.g. netdev notifier when
interface exits a bond) should execute in a separate thread.  To
accomplish this, add a flag to the PF that will be evaluated in the
service task and dealt with there.

Fixes: f9f5301e7e2d ("ice: Register auxiliary device to provide RDMA")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Reviewed-by: Jonathan Toppins <jtoppins@redhat.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: Fix KASAN error in LAG NETDEV_UNREGISTER handler

[ Upstream commit bea1898f65b9b7096cb4e73e97c83b94718f1fa1 ]

Currently, the same handler is called for both a NETDEV_BONDING_INFO
LAG unlink notification as for a NETDEV_UNREGISTER call.  This is
causing a problem though, since the netdev_notifier_info passed has
a different structure depending on which event is passed.  The problem
manifests as a call trace from a BUG: KASAN stack-out-of-bounds error.

Fix this by creating a handler specific to NETDEV_UNREGISTER that only
is passed valid elements in the netdev_notifier_info struct for the
NETDEV_UNREGISTER event.

Also included is the removal of an unbalanced dev_put on the peer_netdev
and related braces.

Fixes: 6a8b357278f5 ("ice: Respond to a NETDEV_UNREGISTER event for LAG")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: fix IPIP and SIT TSO offload

[ Upstream commit 46b699c50c0304cdbd725d7740073a7f9d5edb10 ]

The driver was avoiding offload for IPIP (at least) frames due to
parsing the inner header offsets incorrectly when trying to check
lengths.

This length check works for VXLAN frames but fails on IPIP frames
because skb_transport_offset points to the inner header in IPIP
frames, which meant the subtraction of transport_header from
inner_network_header returns a negative value (-20).

With the code before this patch, everything continued to work, but GSO
was being used to segment, causing throughputs of 1.5Gb/s per thread.
After this patch, throughput is more like 10Gb/s per thread for IPIP
traffic.

Fixes: e94d44786693 ("ice: Implement filter sync, NDO operations and bump version")
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: fix an error code in ice_cfg_phy_fec()

[ Upstream commit 21338d58736ef70eaae5fd75d567a358ff7902f9 ]

Propagate the error code from ice_get_link_default_override() instead
of returning success.

Fixes: ea78ce4dab05 ("ice: add link lenient and default override support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dpaa2-eth: unregister the netdev before disconnecting from the PHY

[ Upstream commit 9ccc6e0c8959a019bb40f6b18704b142c04b19a8 ]

The netdev should be unregistered before we are disconnecting from the
MAC/PHY so that the dev_close callback is called and the PHY and the
phylink workqueues are actually stopped before we are disconnecting and
destroying the phylink instance.

Fixes: 719479230893 ("dpaa2-eth: add MAC/PHY support through phylink")
Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mptcp: netlink: process IPv6 addrs in creating listening sockets

[ Upstream commit 029744cd4bc6e9eb3bd833b4a033348296d34645 ]

This change updates mptcp_pm_nl_create_listen_socket() to create
listening sockets bound to IPv6 addresses (where IPv6 is supported).

Fixes: 1729cf186d8a ("mptcp: create the listening socket for new port")
Acked-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/pm: fix hwmon node of power1_label create issue

[ Upstream commit a8b1e8636a3252daa729762b2e3cc9015cc91a5c ]

it will cause hwmon node of power1_label is not created.

v2:
the hwmon node of "power1_label" is always needed for all ASICs.
and the patch will remove ASIC type check for "power1_label".

Fixes: ae07970a0621d6 ("drm/amd/pm: add support for hwmon control of slow and fast PPT limit on vangogh")

Signed-off-by: Yang Wang <KevinYang.Wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: amd-xgbe: disable interrupts during pci removal

[ Upstream commit 68c2d6af1f1e469544d6cbe9a601d96fb9c00e7f ]

Hardware interrupts are enabled during the pci probe, however,
they are not disabled during pci removal.

Disable all hardware interrupts during pci removal to avoid any
issues.

Fixes: e75377404726 ("amd-xgbe: Update PCI support to use new IRQ functions")
Suggested-by: Selwin Sebastian <Selwin.Sebastian@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tipc: rate limit warning for received illegal binding update

[ Upstream commit c7223d687758462826a20e9735305d55bb874c70 ]

It would be easy to craft a message containing an illegal binding table
update operation. This is handled correctly by the code, but the
corresponding warning printout is not rate limited as is should be.
We fix this now.

Fixes: b97bf3fd8f6a ("[TIPC] Initial merge")
Signed-off-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: mdio: aspeed: Add missing MODULE_DEVICE_TABLE

[ Upstream commit bc1c3c3b10db4f37c41e6107751a8d450d9c431c ]

Fix loading of the driver when built as a module.

Fixes: f160e99462c6 ("net: phy: Add mdio-aspeed")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

veth: fix races around rq->rx_notify_masked

[ Upstream commit 68468d8c4cd4222a4ca1f185ab5a1c14480d078c ]

veth being NETIF_F_LLTX enabled, we need to be more careful
whenever we read/write rq->rx_notify_masked.

BUG: KCSAN: data-race in veth_xmit / veth_xmit

write to 0xffff888133d9a9f8 of 1 bytes by task 23552 on cpu 0:
 __veth_xdp_flush drivers/net/veth.c:269 [inline]
 veth_xmit+0x307/0x470 drivers/net/veth.c:350
 __netdev_start_xmit include/linux/netdevice.h:4683 [inline]
 netdev_start_xmit include/linux/netdevice.h:4697 [inline]
 xmit_one+0x105/0x2f0 net/core/dev.c:3473
 dev_hard_start_xmit net/core/dev.c:3489 [inline]
 __dev_queue_xmit+0x86d/0xf90 net/core/dev.c:4116
 dev_queue_xmit+0x13/0x20 net/core/dev.c:4149
 br_dev_queue_push_xmit+0x3ce/0x430 net/bridge/br_forward.c:53
 NF_HOOK include/linux/netfilter.h:307 [inline]
 br_forward_finish net/bridge/br_forward.c:66 [inline]
 NF_HOOK include/linux/netfilter.h:307 [inline]
 __br_forward+0x2e4/0x400 net/bridge/br_forward.c:115
 br_flood+0x521/0x5c0 net/bridge/br_forward.c:242
 br_dev_xmit+0x8b6/0x960
 __netdev_start_xmit include/linux/netdevice.h:4683 [inline]
 netdev_start_xmit include/linux/netdevice.h:4697 [inline]
 xmit_one+0x105/0x2f0 net/core/dev.c:3473
 dev_hard_start_xmit net/core/dev.c:3489 [inline]
 __dev_queue_xmit+0x86d/0xf90 net/core/dev.c:4116
 dev_queue_xmit+0x13/0x20 net/core/dev.c:4149
 neigh_hh_output include/net/neighbour.h:525 [inline]
 neigh_output include/net/neighbour.h:539 [inline]
 ip_finish_output2+0x6f8/0xb70 net/ipv4/ip_output.c:228
 ip_finish_output+0xfb/0x240 net/ipv4/ip_output.c:316
 NF_HOOK_COND include/linux/netfilter.h:296 [inline]
 ip_output+0xf3/0x1a0 net/ipv4/ip_output.c:430
 dst_output include/net/dst.h:451 [inline]
 ip_local_out net/ipv4/ip_output.c:126 [inline]
 ip_send_skb+0x6e/0xe0 net/ipv4/ip_output.c:1570
 udp_send_skb+0x641/0x880 net/ipv4/udp.c:967
 udp_sendmsg+0x12ea/0x14c0 net/ipv4/udp.c:1254
 inet_sendmsg+0x5f/0x80 net/ipv4/af_inet.c:819
 sock_sendmsg_nosec net/socket.c:705 [inline]
 sock_sendmsg net/socket.c:725 [inline]
 ____sys_sendmsg+0x39a/0x510 net/socket.c:2413
 ___sys_sendmsg net/socket.c:2467 [inline]
 __sys_sendmmsg+0x267/0x4c0 net/socket.c:2553
 __do_sys_sendmmsg net/socket.c:2582 [inline]
 __se_sys_sendmmsg net/socket.c:2579 [inline]
 __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2579
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

read to 0xffff888133d9a9f8 of 1 bytes by task 23563 on cpu 1:
 __veth_xdp_flush drivers/net/veth.c:268 [inline]
 veth_xmit+0x2d6/0x470 drivers/net/veth.c:350
 __netdev_start_xmit include/linux/netdevice.h:4683 [inline]
 netdev_start_xmit include/linux/netdevice.h:4697 [inline]
 xmit_one+0x105/0x2f0 net/core/dev.c:3473
 dev_hard_start_xmit net/core/dev.c:3489 [inline]
 __dev_queue_xmit+0x86d/0xf90 net/core/dev.c:4116
 dev_queue_xmit+0x13/0x20 net/core/dev.c:4149
 br_dev_queue_push_xmit+0x3ce/0x430 net/bridge/br_forward.c:53
 NF_HOOK include/linux/netfilter.h:307 [inline]
 br_forward_finish net/bridge/br_forward.c:66 [inline]
 NF_HOOK include/linux/netfilter.h:307 [inline]
 __br_forward+0x2e4/0x400 net/bridge/br_forward.c:115
 br_flood+0x521/0x5c0 net/bridge/br_forward.c:242
 br_dev_xmit+0x8b6/0x960
 __netdev_start_xmit include/linux/netdevice.h:4683 [inline]
 netdev_start_xmit include/linux/netdevice.h:4697 [inline]
 xmit_one+0x105/0x2f0 net/core/dev.c:3473
 dev_hard_start_xmit net/core/dev.c:3489 [inline]
 __dev_queue_xmit+0x86d/0xf90 net/core/dev.c:4116
 dev_queue_xmit+0x13/0x20 net/core/dev.c:4149
 neigh_hh_output include/net/neighbour.h:525 [inline]
 neigh_output include/net/neighbour.h:539 [inline]
 ip_finish_output2+0x6f8/0xb70 net/ipv4/ip_output.c:228
 ip_finish_output+0xfb/0x240 net/ipv4/ip_output.c:316
 NF_HOOK_COND include/linux/netfilter.h:296 [inline]
 ip_output+0xf3/0x1a0 net/ipv4/ip_output.c:430
 dst_output include/net/dst.h:451 [inline]
 ip_local_out net/ipv4/ip_output.c:126 [inline]
 ip_send_skb+0x6e/0xe0 net/ipv4/ip_output.c:1570
 udp_send_skb+0x641/0x880 net/ipv4/udp.c:967
 udp_sendmsg+0x12ea/0x14c0 net/ipv4/udp.c:1254
 inet_sendmsg+0x5f/0x80 net/ipv4/af_inet.c:819
 sock_sendmsg_nosec net/socket.c:705 [inline]
 sock_sendmsg net/socket.c:725 [inline]
 ____sys_sendmsg+0x39a/0x510 net/socket.c:2413
 ___sys_sendmsg net/socket.c:2467 [inline]
 __sys_sendmmsg+0x267/0x4c0 net/socket.c:2553
 __do_sys_sendmmsg net/socket.c:2582 [inline]
 __se_sys_sendmmsg net/socket.c:2579 [inline]
 __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2579
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

value changed: 0x00 -> 0x01

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 23563 Comm: syz-executor.5 Not tainted 5.17.0-rc2-syzkaller-00064-gc36c04c2e132 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: 948d4f214fde ("veth: Add driver XDP")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: fix a memleak when uncloning an skb dst and its metadata

[ Upstream commit 9eeabdf17fa0ab75381045c867c370f4cc75a613 ]

When uncloning an skb dst and its associated metadata, a new
dst+metadata is allocated and later replaces the old one in the skb.
This is helpful to have a non-shared dst+metadata attached to a specific
skb.

The issue is the uncloned dst+metadata is initialized with a refcount of
1, which is increased to 2 before attaching it to the skb. When
tun_dst_unclone returns, the dst+metadata is only referenced from a
single place (the skb) while its refcount is 2. Its refcount will never
drop to 0 (when the skb is consumed), leading to a memory leak.

Fix this by removing the call to dst_hold in tun_dst_unclone, as the
dst+metadata refcount is already 1.

Fixes: fc4099f17240 ("openvswitch: Fix egress tunnel info.")
Cc: Pravin B Shelar <pshelar@ovn.org>
Reported-by: Vlad Buslov <vladbu@nvidia.com>
Tested-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: do not keep the dst cache when uncloning an skb dst and its metadata

[ Upstream commit cfc56f85e72f5b9c5c5be26dc2b16518d36a7868 ]

When uncloning an skb dst and its associated metadata a new dst+metadata
is allocated and the tunnel information from the old metadata is copied
over there.

The issue is the tunnel metadata has references to cached dst, which are
copied along the way. When a dst+metadata refcount drops to 0 the
metadata is freed including the cached dst entries. As they are also
referenced in the initial dst+metadata, this ends up in UaFs.

In practice the above did not happen because of another issue, the
dst+metadata was never freed because its refcount never dropped to 0
(this will be fixed in a subsequent patch).

Fix this by initializing the dst cache after copying the tunnel
information from the old metadata to also unshare the dst cache.

Fixes: d71785ffc7e7 ("net: add dst_cache to ovs vxlan lwtunnel")
Cc: Paolo Abeni <pabeni@redhat.com>
Reported-by: Vlad Buslov <vladbu@nvidia.com>
Tested-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfp: flower: fix ida_idx not being released

[ Upstream commit 7db788ad627aabff2b74d4f1a3b68516d0fee0d7 ]

When looking for a global mac index the extra NFP_TUN_PRE_TUN_IDX_BIT
that gets set if nfp_flower_is_supported_bridge is true is not taken
into account. Consequently the path that should release the ida_index
in cleanup is never triggered, causing messages like:

    nfp 0000:02:00.0: nfp: Failed to offload MAC on br-ex.
    nfp 0000:02:00.0: nfp: Failed to offload MAC on br-ex.
    nfp 0000:02:00.0: nfp: Failed to offload MAC on br-ex.

after NFP_MAX_MAC_INDEX number of reconfigs. Ultimately this lead to
new tunnel flows not being offloaded.

Fix this by unsetting the NFP_TUN_PRE_TUN_IDX_BIT before checking if
the port is of type OTHER.

Fixes: 2e0bc7f3cb55 ("nfp: flower: encode mac indexes with pre-tunnel rule check")
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20220208101453.321949-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipmr,ip6mr: acquire RTNL before calling ip[6]mr_free_table() on failure path

[ Upstream commit 5611a00697c8ecc5aad04392bea629e9d6a20463 ]

ip[6]mr_free_table() can only be called under RTNL lock.

RTNL: assertion failed at net/core/dev.c (10367)
WARNING: CPU: 1 PID: 5890 at net/core/dev.c:10367 unregister_netdevice_many+0x1246/0x1850 net/core/dev.c:10367
Modules linked in:
CPU: 1 PID: 5890 Comm: syz-executor.2 Not tainted 5.16.0-syzkaller-11627-g422ee58dc0ef #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:unregister_netdevice_many+0x1246/0x1850 net/core/dev.c:10367
Code: 0f 85 9b ee ff ff e8 69 07 4b fa ba 7f 28 00 00 48 c7 c6 00 90 ae 8a 48 c7 c7 40 90 ae 8a c6 05 6d b1 51 06 01 e8 8c 90 d8 01 <0f> 0b e9 70 ee ff ff e8 3e 07 4b fa 4c 89 e7 e8 86 2a 59 fa e9 ee
RSP: 0018:ffffc900046ff6e0 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff888050f51d00 RSI: ffffffff815fa008 RDI: fffff520008dfece
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff815f3d6e R11: 0000000000000000 R12: 00000000fffffff4
R13: dffffc0000000000 R14: ffffc900046ff750 R15: ffff88807b7dc000
FS:  00007f4ab736e700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fee0b4f8990 CR3: 000000001e7d2000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 mroute_clean_tables+0x244/0xb40 net/ipv6/ip6mr.c:1509
 ip6mr_free_table net/ipv6/ip6mr.c:389 [inline]
 ip6mr_rules_init net/ipv6/ip6mr.c:246 [inline]
 ip6mr_net_init net/ipv6/ip6mr.c:1306 [inline]
 ip6mr_net_init+0x3f0/0x4e0 net/ipv6/ip6mr.c:1298
 ops_init+0xaf/0x470 net/core/net_namespace.c:140
 setup_net+0x54f/0xbb0 net/core/net_namespace.c:331
 copy_net_ns+0x318/0x760 net/core/net_namespace.c:475
 create_new_namespaces+0x3f6/0xb20 kernel/nsproxy.c:110
 copy_namespaces+0x391/0x450 kernel/nsproxy.c:178
 copy_process+0x2e0c/0x7300 kernel/fork.c:2167
 kernel_clone+0xe7/0xab0 kernel/fork.c:2555
 __do_sys_clone+0xc8/0x110 kernel/fork.c:2672
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f4ab89f9059
Code: Unable to access opcode bytes at RIP 0x7f4ab89f902f.
RSP: 002b:00007f4ab736e118 EFLAGS: 00000206 ORIG_RAX: 0000000000000038
RAX: ffffffffffffffda RBX: 00007f4ab8b0bf60 RCX: 00007f4ab89f9059
RDX: 0000000020000280 RSI: 0000000020000270 RDI: 0000000040200000
RBP: 00007f4ab8a5308d R08: 0000000020000300 R09: 0000000020000300
R10: 00000000200002c0 R11: 0000000000000206 R12: 0000000000000000
R13: 00007ffc3977cc1f R14: 00007f4ab736e300 R15: 0000000000022000
 </TASK>

Fixes: f243e5a7859a ("ipmr,ip6mr: call ip6mr_free_table() on failure path")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Cong Wang <cong.wang@bytedance.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20220208053451.2885398-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: lantiq_gswip: don't use devres for mdiobus

[ Upstream commit 0d120dfb5d67edc5bcd1804e167dba2b30809afd ]

As explained in commits:
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")

mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.

The GSWIP switch is a platform device, so the initial set of constraints
that I thought would cause this (I2C or SPI buses which call ->remove on
->shutdown) do not apply. But there is one more which applies here.

If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the GSWIP switch driver on shutdown.

So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.

The gswip driver has the code structure in place for orderly mdiobus
removal, so just replace devm_mdiobus_alloc() with the non-devres
variant, and add manual free where necessary, to ensure that we don't
let devres free a still-registered bus.

Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: mt7530: fix kernel bug in mdiobus_free() when unbinding

[ Upstream commit 9ffe3d09e32da45bb5a29cf2e80ec8d7534010c5 ]

Nobody in this driver calls mdiobus_unregister(), which is necessary if
mdiobus_register() completes successfully. So if the devres callbacks
that free the mdiobus get invoked (this is the case when unbinding the
driver), mdiobus_free() will BUG if the mdiobus is still registered,
which it is.

My speculation is that this is due to the fact that prior to commit
ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
from June 2020, _devm_mdiobus_free() used to call mdiobus_unregister().
But at the time that the mt7530 support was introduced in May 2021, the
API was already changed. It's therefore likely that the blamed patch was
developed on an older tree, and incorrectly adapted to net-next. This
makes the Fixes: tag correct.

Fix the problem by using the devres variant of mdiobus_register.

Fixes: ba751e28d442 ("net: dsa: mt7530: add interrupt support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: felix: don't use devres for mdiobus

[ Upstream commit 209bdb7ec6a28c7cdf580a0a98afbc9fc3b98932 ]

As explained in commits:
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")

mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.

The Felix VSC9959 switch is a PCI device, so the initial set of
constraints that I thought would cause this (I2C or SPI buses which call
->remove on ->shutdown) do not apply. But there is one more which
applies here.

If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the felix switch driver on shutdown.

So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.

The felix driver has the code structure in place for orderly mdiobus
removal, so just replace devm_mdiobus_alloc_size() with the non-devres
variant, and add manual free where necessary, to ensure that we don't
let devres free a still-registered bus.

Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: bcm_sf2: don't use devres for mdiobus

[ Upstream commit 08f1a20822349004bb9cc1b153ecb516e9f2889d ]

As explained in commits:
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")

mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.

The Starfighter 2 is a platform device, so the initial set of
constraints that I thought would cause this (I2C or SPI buses which call
->remove on ->shutdown) do not apply. But there is one more which
applies here.

If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the bcm_sf2 switch driver on shutdown.

So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.

The bcm_sf2 driver has the code structure in place for orderly mdiobus
removal, so just replace devm_mdiobus_alloc() with the non-devres
variant, and add manual free where necessary, to ensure that we don't
let devres free a still-registered bus.

Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: ar9331: register the mdiobus under devres

[ Upstream commit 50facd86e9fbc4b93fe02e5fe05776047f45dbfb ]

As explained in commits:
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")

mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.

The ar9331 is an MDIO device, so the initial set of constraints that I
thought would cause this (I2C or SPI buses which call ->remove on
->shutdown) do not apply. But there is one more which applies here.

If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the ar9331 switch driver on shutdown.

So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.

The ar9331 driver doesn't have a complex code structure for mdiobus
removal, so just replace of_mdiobus_register with the devres variant in
order to be all-devres and ensure that we don't free a still-registered
bus.

Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: mv88e6xxx: don't use devres for mdiobus

[ Upstream commit f53a2ce893b2c7884ef94471f170839170a4eba0 ]

As explained in commits:
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")

mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.

The mv88e6xxx is an MDIO device, so the initial set of constraints that
I thought would cause this (I2C or SPI buses which call ->remove on
->shutdown) do not apply. But there is one more which applies here.

If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the Marvell switch driver on shutdown.

systemd-shutdown[1]: Powering off.
mv88e6085 0x0000000008b96000:00 sw_gl0: Link is Down
fsl-mc dpbp.9: Removing from iommu group 7
fsl-mc dpbp.8: Removing from iommu group 7
------------[ cut here ]------------
kernel BUG at drivers/net/phy/mdio_bus.c:677!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 5.16.5-00040-gdc05f73788e5 #15
pc : mdiobus_free+0x44/0x50
lr : devm_mdiobus_free+0x10/0x20
Call trace:
 mdiobus_free+0x44/0x50
 devm_mdiobus_free+0x10/0x20
 devres_release_all+0xa0/0x100
 __device_release_driver+0x190/0x220
 device_release_driver_internal+0xac/0xb0
 device_links_unbind_consumers+0xd4/0x100
 __device_release_driver+0x4c/0x220
 device_release_driver_internal+0xac/0xb0
 device_links_unbind_consumers+0xd4/0x100
 __device_release_driver+0x94/0x220
 device_release_driver+0x28/0x40
 bus_remove_device+0x118/0x124
 device_del+0x174/0x420
 fsl_mc_device_remove+0x24/0x40
 __fsl_mc_device_remove+0xc/0x20
 device_for_each_child+0x58/0xa0
 dprc_remove+0x90/0xb0
 fsl_mc_driver_remove+0x20/0x5c
 __device_release_driver+0x21c/0x220
 device_release_driver+0x28/0x40
 bus_remove_device+0x118/0x124
 device_del+0x174/0x420
 fsl_mc_bus_remove+0x80/0x100
 fsl_mc_bus_shutdown+0xc/0x1c
 platform_shutdown+0x20/0x30
 device_shutdown+0x154/0x330
 kernel_power_off+0x34/0x6c
 __do_sys_reboot+0x15c/0x250
 __arm64_sys_reboot+0x20/0x30
 invoke_syscall.constprop.0+0x4c/0xe0
 do_el0_svc+0x4c/0x150
 el0_svc+0x24/0xb0
 el0t_64_sync_handler+0xa8/0xb0
 el0t_64_sync+0x178/0x17c

So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.

The Marvell driver already has a good structure for mdiobus removal, so
just plug in mdiobus_free and get rid of devres.

Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Reported-by: Rafael Richter <Rafael.Richter@gin.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Daniel Klauer <daniel.klauer@gin.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bonding: pair enable_port with slave_arr_updates

[ Upstream commit 23de0d7b6f0e3f9a6283a882594c479949da1120 ]

When 803.2ad mode enables a participating port, it should update
the slave-array. I have observed that the member links are participating
and are part of the active aggregator while the traffic is egressing via
only one member link (in a case where two links are participating). Via
kprobes I discovered that slave-arr has only one link added while
the other participating link wasn't part of the slave-arr.

I couldn't see what caused that situation but the simple code-walk
through provided me hints that the enable_port wasn't always associated
with the slave-array update.

Fixes: ee6377147409 ("bonding: Simplify the xmit function for modes that use xmit_hash")
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/20220207222901.1795287-1-maheshb@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbcon: Avoid 'cap' set but not used warning

[ Upstream commit 50b10528aad568c95f772039d4b3093b4aea7439 ]

Fix this kernel test robot warning:

  drivers/video/fbdev/core/fbcon.c: In function 'fbcon_init':
  drivers/video/fbdev/core/fbcon.c:1028:6: warning: variable 'cap' set but not used [-Wunused-but-set-variable]

The cap variable is only used when CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION
is enabled. Drop the temporary variable and use info->flags instead.

Fixes: 87ab9f6b7417 ("Revert "fbcon: Disable accelerated scrolling")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/YgFB4xqI+As196FR@p100
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: sifive: use the correct register to read output values

[ Upstream commit cc38ef936840ac29204d806deb4d1836ec509594 ]

Setting the output of a GPIO to 1 using gpiod_set_value(), followed by
reading the same GPIO using gpiod_get_value(), will currently yield an
incorrect result.

This is because the SiFive GPIO device stores the output values in reg_set,
not reg_dat.

Supply the flag BGPIOF_READ_OUTPUT_REG_SET to bgpio_init() so that the
generic driver reads the correct register.

Fixes: 96868dce644d ("gpio/sifive: Add GPIO driver for SiFive SoCs")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
[Bartosz: added the Fixes tag]
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpiolib: Never return internal error codes to user space

[ Upstream commit 95a4eed7dd5b7c1c3664a626174290686ddbee9f ]

Currently it's possible that character device interface may return
the error codes which are not supposed to be seen by user space.
In this case it's EPROBE_DEFER.

Wrap it to return -ENODEV instead as sysfs does.

Fixes: d7c51b47ac11 ("gpio: userspace ABI for reading/writing GPIO lines")
Fixes: 61f922db7221 ("gpio: userspace ABI for reading GPIO line events")
Fixes: 3c0d9c635ae2 ("gpiolib: cdev: support GPIO_V2_GET_LINE_IOCTL and GPIO_V2_LINE_GET_VALUES_IOCTL")
Reported-by: Suresh Balakrishnan <suresh.balakrishnan@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: PM: s2idle: Cancel wakeup before dispatching EC GPE

[ Upstream commit dc0075ba7f387fe4c48a8c674b11ab6f374a6acc ]

Commit 4a9af6cac050 ("ACPI: EC: Rework flushing of EC work while
suspended to idle") made acpi_ec_dispatch_gpe() check
pm_wakeup_pending(), but that is before canceling the SCI wakeup,
so pm_wakeup_pending() is always true.  This causes the loop in
acpi_ec_dispatch_gpe() to always terminate after one iteration which
may not be correct.

Address this issue by canceling the SCI wakeup earlier, from
acpi_ec_dispatch_gpe() itself.

Fixes: 4a9af6cac050 ("ACPI: EC: Rework flushing of EC work while suspended to idle")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/panel: simple: Assign data from panel_dpi_probe() correctly

[ Upstream commit 6df4432a5eca101b5fd80fbee41d309f3d67928d ]

In the function panel_simple_probe() the pointer panel->desc is
assigned to the passed pointer desc. If function panel_dpi_probe()
is called panel->desc will be updated, but further on only desc
will be evaluated. So update the desc pointer to be able to use
the data from the function panel_dpi_probe().

Fixes: 4a1d0dbc8332 ("drm/panel: simple: add panel-dpi support")

Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
To: dri-devel@lists.freedesktop.org
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220201110153.3479-1-cniedermaier@dh-electronics.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ixgbevf: Require large buffers for build_skb on 82599VF

[ Upstream commit fe68195daf34d5dddacd3f93dd3eafc4beca3a0e ]

From 4.17 onwards the ixgbevf driver uses build_skb() to build an skb
around new data in the page buffer shared with the ixgbe PF.
This uses either a 2K or 3K buffer, and offsets the DMA mapping by
NET_SKB_PAD + NET_IP_ALIGN. When using a smaller buffer RXDCTL is set to
ensure the PF does not write a full 2K bytes into the buffer, which is
actually 2K minus the offset.

However on the 82599 virtual function, the RXDCTL mechanism is not
available. The driver attempts to work around this by using the SET_LPE
mailbox method to lower the maximm frame size, but the ixgbe PF driver
ignores this in order to keep the PF and all VFs in sync[0].

This means the PF will write up to the full 2K set in SRRCTL, causing it
to write NET_SKB_PAD + NET_IP_ALIGN bytes past the end of the buffer.
With 4K pages split into two buffers, this means it either writes
NET_SKB_PAD + NET_IP_ALIGN bytes past the first buffer (and into the
second), or NET_SKB_PAD + NET_IP_ALIGN bytes past the end of the DMA
mapping.

Avoid this by only enabling build_skb when using "large" buffers (3K).
These are placed in each half of an order-1 page, preventing the PF from
writing past the end of the mapping.

[0]: Technically it only ever raises the max frame size, see
ixgbe_set_vf_lpe() in ixgbe_sriov.c

Fixes: f15c5ba5b6cd ("ixgbevf: add support for using order 1 pages to receive large frames")
Signed-off-by: Samuel Mendoza-Jonas <samjonas@amazon.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: meson-sm1-odroid: fix boot loop after reboot

[ Upstream commit e6b03375132fefddc55cf700418cf794b3884e0c ]

Since the correct gpio pin is used for enabling tf-io regulator the
system did not boot correctly after calling reboot.

[   36.862443] reboot: Restarting system
bl31 reboot reason: 0xd
bl31 reboot reason: 0x0
system cmd  1.
SM1:BL:511f6b:81ca2f;FEAT:A0F83180:20282000;POC:B;RCY:0;SPINOR:0;CHK:1F;EMMC:800;NAND:81;SD?:0;SD:0;READ:0;0.0;CHK:0;
bl2_stage_init 0x01
bl2_stage_init 0x81
hw id:
SM1:BL:511f6b:81ca2f;FEAT:A0F83180:20282000;POC:B;RCY:0;SPINOR:0;CHK:1F;EMMC:800;NAND:81;SD?:0;SD:400;USB:8;LOOP:1;...

Setting the gpio to open drain solves the issue.

Fixes: 1f80a5cf74a6 ("arm64: dts: meson-sm1-odroid: add missing enable gpio and supply for tf_io regulator")
Signed-off-by: Lutz Koschorreck <theleks@ko-hh.de>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: reduced serial log & removed invalid character in commit message]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220128193150.GA1304381@odroid-VirtualBox
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: meson-sm1-bananapi-m5: fix wrong GPIO domain for GPIOE_2

[ Upstream commit a5be3e5d46f373fe1d2ee835c7ede31769c241cd ]

GPIOE_2 is in AO domain and "<&gpio GPIOE_2 ...>" changes the state of
TF_PWR_EN of 'FC8731' on BPI-M5

Fixes: 976e920183e4 ("arm64: dts: meson-sm1: add Banana PI BPI-M5 board dts")

Signed-off-by: Dongjin Kim <tobetter@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220127151656.GA2419733@paju
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: meson-sm1-odroid: use correct enable-gpio pin for tf-io regulator

[ Upstream commit 323ca765bfe9d637fa774373baec0bc41e51fcfa ]

The interrupt pin of the external ethernet phy is used, instead of the
enable-gpio pin of the tf-io regulator. The GPIOE_2 pin is located in
the gpio_ao bank.

This causes phy interrupt problems at system startup.
[   76.645190] irq 36: nobody cared (try booting with the "irqpoll" option)
[   76.649617] CPU: 0 PID: 1416 Comm: irq/36-0.0:00 Not tainted 5.16.0 #2
[   76.649629] Hardware name: Hardkernel ODROID-HC4 (DT)
[   76.649635] Call trace:
[   76.649638]  dump_backtrace+0x0/0x1c8
[   76.649658]  show_stack+0x14/0x60
[   76.649667]  dump_stack_lvl+0x64/0x7c
[   76.649676]  dump_stack+0x14/0x2c
[   76.649683]  __report_bad_irq+0x38/0xe8
[   76.649695]  note_interrupt+0x220/0x3a0
[   76.649704]  handle_irq_event_percpu+0x58/0x88
[   76.649713]  handle_irq_event+0x44/0xd8
[   76.649721]  handle_fasteoi_irq+0xa8/0x130
[   76.649730]  generic_handle_domain_irq+0x38/0x58
[   76.649738]  gic_handle_irq+0x9c/0xb8
[   76.649747]  call_on_irq_stack+0x28/0x38
[   76.649755]  do_interrupt_handler+0x7c/0x80
[   76.649763]  el1_interrupt+0x34/0x80
[   76.649772]  el1h_64_irq_handler+0x14/0x20
[   76.649781]  el1h_64_irq+0x74/0x78
[   76.649788]  irq_finalize_oneshot.part.56+0x68/0xf8
[   76.649796]  irq_thread_fn+0x5c/0x98
[   76.649804]  irq_thread+0x13c/0x260
[   76.649812]  kthread+0x144/0x178
[   76.649822]  ret_from_fork+0x10/0x20
[   76.649830] handlers:
[   76.653170] [<0000000025a6cd31>] irq_default_primary_handler threaded [<0000000093580eb7>] phy_interrupt
[   76.661256] Disabling IRQ #36

Fixes: 1f80a5cf74a6 ("arm64: dts: meson-sm1-odroid: add missing enable gpio and supply for tf_io regulator")
Signed-off-by: Lutz Koschorreck <theleks@ko-hh.de>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: removed spurious invalid & blank lines from commit message]
Link: https://lore.kernel.org/r/20220127130537.GA187347@odroid-VirtualBox
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: meson-g12b-odroid-n2: fix typo 'dio2133'

[ Upstream commit bc41099f060ea74ac8d02c51bd0f5f46d969bedf ]

Typo in audio amplifier node, dioo2133 -> dio2133

Signed-off-by: Dongjin Kim <tobetter@gmail.com>
Fixes: ef599f5f3e10 ("arm64: dts: meson: convert ODROID-N2 to dtsi")
Fixes: 67d141c1f8e6 ("arm64: dts: meson: odroid-n2: add jack audio output support")
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/YfKQJejh0bfGYvof@anyang
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: ctnetlink: disable helper autoassign

[ Upstream commit d1ca60efc53d665cf89ed847a14a510a81770b81 ]

When userspace, e.g. conntrackd, inserts an entry with a specified helper,
its possible that the helper is lost immediately after its added:

ctnetlink_create_conntrack
  -> nf_ct_helper_ext_add + assign helper
    -> ctnetlink_setup_nat
      -> ctnetlink_parse_nat_setup
         -> parse_nat_setup -> nfnetlink_parse_nat_setup
                       -> nf_nat_setup_info
                                 -> nf_conntrack_alter_reply
                                   -> __nf_ct_try_assign_helper

... and __nf_ct_try_assign_helper will zero the helper again.

Set IPS_HELPER bit to bypass auto-assign logic, its unwanted, just like
when helper is assigned via ruleset.

Dropped old 'not strictly necessary' comment, it referred to use of
rcu_assign_pointer() before it got replaced by RCU_INIT_POINTER().

NB: Fixes tag intentionally incorrect, this extends the referenced commit,
but this change won't build without IPS_HELPER introduced there.

Fixes: 6714cf5465d280 ("netfilter: nf_conntrack: fix explicit helper attachment and NAT")
Reported-by: Pham Thanh Tuyen <phamtyn@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sparx5: Fix get_stat64 crash in tcpdump

[ Upstream commit ed14fc7a79ab43e9f2cb1fa9c1733fdc133bba30 ]

This problem was found with Sparx5 when the tcpdump tool requests the
do_get_stats64 (sparx5_get_stats64) statistic.

The portstats pointer was incorrectly incremented when fetching priority
based statistics.

Fixes: af4b11022e2d (net: sparx5: add ethtool configuration and statistics support)
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Link: https://lore.kernel.org/r/20220203102900.528987-1-steen.hegelund@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

misc: fastrpc: avoid double fput() on failed usercopy

[ Upstream commit 46963e2e0629cb31c96b1d47ddd89dc3d8990b34 ]

If the copy back to userland fails for the FASTRPC_IOCTL_ALLOC_DMA_BUFF
ioctl(), we shouldn't assume that 'buf->dmabuf' is still valid. In fact,
dma_buf_fd() called fd_install() before, i.e. "consumed" one reference,
leaving us with none.

Calling dma_buf_put() will therefore put a reference we no longer own,
leading to a valid file descritor table entry for an already released
'file' object which is a straight use-after-free.

Simply avoid calling dma_buf_put() and rely on the process exit code to
do the necessary cleanup, if needed, i.e. if the file descriptor is
still valid.

Fixes: 6cffd79504ce ("misc: fastrpc: Add support for dmabuf exporter")
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Link: https://lore.kernel.org/r/20220127130218.809261-1-minipli@grsecurity.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vc4: hdmi: Allow DBLCLK modes even if horz timing is odd.

[ Upstream commit 1d118965965f89948236ebe23072bb1fca5e7832 ]

The 2711 pixel valve can't produce odd horizontal timings, and
checks were added to vc4_hdmi_encoder_atomic_check and
vc4_hdmi_encoder_mode_valid to filter out/block selection of
such modes.

Modes with DRM_MODE_FLAG_DBLCLK double all the horizontal timing
values before programming them into the PV. The PV values,
therefore, can not be odd, and so the modes can be supported.

Amend the filtering appropriately.

Fixes: 57fb32e632be ("drm/vc4: hdmi: Block odd horizontal timings")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127135116.298278-1-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFS: Don't skip directory entries when doing uncached readdir

[ Upstream commit ce292d8faf41f62e0fb0c78476c6fce5d629235a ]

Ensure that we initialise desc->cache_entry_index correctly in
uncached_readdir().

Fixes: d1bacf9eb2fd ("NFS: add readdir cache array")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFS: Don't overfill uncached readdir pages

[ Upstream commit d9c4e39c1f8f8a8ebaccf00b8f22c14364b2d27e ]

If we're doing an uncached read of the directory, then we ideally want
to read only the exact set of entries that will fit in the buffer
supplied by the getdents() system call. So unlike the case where we're
reading into the page cache, let's send only one READDIR call, before
trying to fill up the buffer.

Fixes: 35df59d3ef69 ("NFS: Reduce number of RPC calls when doing uncached readdir")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: aggregator: Fix calling into sleeping GPIO controllers

[ Upstream commit 2cba05451a6d0c703bb74f1a250691404f27c4f1 ]

If the parent GPIO controller is a sleeping controller (e.g. a GPIO
controller connected to I2C), getting or setting a GPIO triggers a
might_sleep() warning.  This happens because the GPIO Aggregator takes
the can_sleep flag into account only for its internal locking, not for
calling into the parent GPIO controller.

Fix this by using the gpiod_[gs]et*_cansleep() APIs when calling into a
sleeping GPIO controller.

Reported-by: Mikko Salomäki <ms@datarespons.se>
Fixes: 828546e24280f721 ("gpio: Add GPIO Aggregator")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: dphy: Correct clk_pre parameter

[ Upstream commit 9a8406ba1a9a2965c27e0db1d7753471d12ee9ff ]

The D-PHY specification (v1.2) explicitly mentions that the T-CLK-PRE
parameter's unit is Unit Interval(UI) and the minimum value is 8.  Also,
kernel doc of the 'clk_pre' member of struct phy_configure_opts_mipi_dphy
mentions that it should be in UI.  However, the dphy core driver wrongly
sets 'clk_pre' to 8000, which seems to hint that it's in picoseconds.

So, let's fix the dphy core driver to correctly reflect the T-CLK-PRE
parameter's minimum value according to the D-PHY specification.

I'm assuming that all impacted custom drivers shall program values in
TxByteClkHS cycles into hardware for the T-CLK-PRE parameter.  The D-PHY
specification mentions that the frequency of TxByteClkHS is exactly 1/8
the High-Speed(HS) bit rate(each HS bit consumes one UI).  So, relevant
custom driver code is changed to program those values as
DIV_ROUND_UP(cfg->clk_pre, BITS_PER_BYTE), then.

Note that I've only tested the patch with RM67191 DSI panel on i.MX8mq EVK.
Help is needed to test with other i.MX8mq, Meson and Rockchip platforms,
as I don't have the hardwares.

Fixes: 2ed869990e14 ("phy: Add MIPI D-PHY configuration options")
Tested-by: Liu Ying <victor.liu@nxp.com> # RM67191 DSI panel on i.MX8mq EVK
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> # for phy-meson-axg-mipi-dphy.c
Tested-by: Neil Armstrong <narmstrong@baylibre.com> # for phy-meson-axg-mipi-dphy.c
Tested-by: Guido Günther <agx@sigxcpu.org> # Librem 5 (imx8mq) with it's rather picky panel
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/20220124024007.1465018-1-victor.liu@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>