Arnd Bergmann [Mon, 27 Sep 2021 14:40:50 +0000 (16:40 +0200)]
ARM: omap1: move omap15xx local bus handling to usb.c
Commit
38225f2ef2f4 ("ARM/omap1: switch to use dma_direct_set_offset for
lbus DMA offsets") removed a lot of mach/memory.h, but left the USB
offset handling split into arch/arm/mach-omap1/usb.c and
drivers/usb/host/ohci-omap.c.
This can cause a randconfig build warning that now fails the build
with -Werror:
arch/arm/mach-omap1/usb.c:561:30: error: 'omap_1510_usb_ohci_nb' defined but not used [-Werror=unused-variable]
561 | static struct notifier_block omap_1510_usb_ohci_nb = {
| ^~~~~~~~~~~~~~~~~~~~~
Move it all into the platform file to get rid of the final
location that relies on mach/memory.h.
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210927144118.2464881-1-arnd@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 5 Oct 2021 13:38:03 +0000 (15:38 +0200)]
Merge tag 'qcom-drivers-fixes-for-5.15' of git://git./linux/kernel/git/qcom/linux into arm/fixes
Qualcomm driver fixes for v5.15
This restricts the QCOM_SCM driver to depend on ARCH_QCOM, to reduce
it's presence after becoming a loadable module.
It then fixes a regression in the mdt_loader, where firmware with the
hash segment marked as PT_LOAD would no longer be accepted, preventing
several MSM8974 and SDM660 devices from loading remoteproc firmware.
Lastly it corrects the drvdata associated with the socinfo device during
probe, to match that expected by the remove function.
* tag 'qcom-drivers-fixes-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
firmware: qcom_scm: QCOM_SCM should depend on ARCH_QCOM
soc: qcom: mdt_loader: Drop PT_LOAD check on hash segment
soc: qcom: socinfo: Fixed argument passed to platform_set_data()
Link: https://lore.kernel.org/r/20210930025456.1035-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 5 Oct 2021 13:37:02 +0000 (15:37 +0200)]
Merge tag 'qcom-arm64-fixes-for-5.15' of git://git./linux/kernel/git/qcom/linux into arm/fixes
Qualcomm ARM64 DTS fixes for 5.15
This starts by reverting the SC7280 CPUfreq update, which was merged
before concensus about the associated drivers changes was reached.
It then moves the reserved-memory changes done to get IPA working on the
Lenovo Yoga C630 into the Yoga specific DTS, as changing the memory map
on the platform level did break a couple of the other boards.
It fixes the HDMI audio on Trogdor and add missing Aggre2 NOC qos clocks
on SDM6{30,36,60} which prevented some boards from booting.
Lastly it enables the PON module on SM8250/QRB5165, as the lack thereof
is blocking automated testing in LKFT.
* tag 'qcom-arm64-fixes-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: sdm630: Add missing a2noc qos clocks
arm64: dts: qcom: qrb5165-rb5: enabled pwrkey and resin nodes
arm64: dts: qcom: pm8150: specify reboot mode magics
arm64: dts: qcom: pm8150: use qcom,pm8998-pon binding
arm64: dts: qcom: sc7180-trogdor: Fix lpass dai link for HDMI
arm64: dts: qcom: sdm850-yoga: Reshuffle IPA memory mappings
Revert "arm64: dts: qcom: sc7280: Fixup the cpufreq node"
Link: https://lore.kernel.org/r/20210930025509.1091-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 5 Oct 2021 13:36:02 +0000 (15:36 +0200)]
Merge tag 'juno-fixes-5.15' of git://git./linux/kernel/git/sudeep.holla/linux into arm/fixes
Juno/Vexpress fixes for v5.15
Bunch of DTS fixes to resolve addressing issues with some of the device
nodes, dropping unused/undocumented properties in various nodes, and
aligning node names with dtschema.
* tag 'juno-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm: dts: vexpress: Fix motherboard bus 'interrupt-map'
arm: dts: vexpress: Fix addressing issues with 'motherboard-bus' nodes
arm: dts: vexpress-v2p-ca9: Fix the SMB unit-address
arm: dts: vexpress: Drop unused properties from motherboard node
arm64: dts: arm: drop unused interrupt-names in MHU
ARM: dts: arm: align watchdog and mmc node names with dtschema
arm64: dts: arm: align watchdog and mmc node names with dtschema
arm64: dts: fvp: Remove panel timings
Link: https://lore.kernel.org/r/20210927105249.3583380-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 5 Oct 2021 13:33:31 +0000 (15:33 +0200)]
Merge tag 'qcom-dts-fixes-for-5.15' of git://git./linux/kernel/git/qcom/linux into arm/fixes
Qualcomm DTS fixes for v5.15
This corrects the use of depricated chipid and clock names, for which
support was finally dropped from the driver. It also ensures that the
DSI PLL is fed by the correct clock, now that it's being migrated to not
rely on global clock names.
* tag 'qcom-dts-fixes-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: apq8064: update Adreno clock names
ARM: dts: qcom: apq8064: Use 27MHz PXO clock as DSI PLL reference
ARM: dts: qcom: apq8064: use compatible which contains chipid
Link: https://lore.kernel.org/r/20210930025526.1146-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 5 Oct 2021 13:32:30 +0000 (15:32 +0200)]
Merge tag 'at91-fixes-5.15-2' of git://git./linux/kernel/git/at91/linux into arm/fixes
AT91 fixes #2 for 5.15:
- More fixes for AT91 platform power management code related to the
introduction of sama7g5:
- management of DDR3L regulator rails for sama7g5ek
- loading of TLB on different cores
- PIO controller slew-rate settings for sama7g5ek: be aligned with
datasheet requirements.
* tag 'at91-fixes-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sama7g5ek: to not touch slew-rate for SDMMC pins
ARM: dts: at91: sama7g5ek: use proper slew-rate settings for GMACs
ARM: at91: pm: preload base address of controllers in tlb
ARM: at91: pm: group constants and addresses loading
ARM: dts: at91: sama7g5ek: add suspend voltage for ddr3l rail
Link: https://lore.kernel.org/r/20211004114344.19304-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Nishanth Menon [Wed, 15 Sep 2021 12:13:08 +0000 (07:13 -0500)]
MAINTAINERS: Add Vignesh to TI K3 platform maintainership
Add Vignesh to TI K3 platform maintainership. We will rotate roles for
each kernel version to help spread the work load a little better.
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210915121308.26795-1-nm@ti.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 5 Oct 2021 13:30:43 +0000 (15:30 +0200)]
Merge tag 'optee-fix-for-v5.15' of git://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes
Fix OP-TEE shm_pool lint warning
* tag 'optee-fix-for-v5.15' of git://git.linaro.org/people/jens.wiklander/linux-tee:
tee/optee/shm_pool: fix application of sizeof to pointer
Link: https://lore.kernel.org/r/20210915113813.GA509196@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Claudiu Beznea [Wed, 15 Sep 2021 07:48:36 +0000 (10:48 +0300)]
ARM: dts: at91: sama7g5ek: to not touch slew-rate for SDMMC pins
With commit
c709135e576b ("pinctrl: at91-pio4: add support for slew-rate")
and commit
cbde6c823bfa ("pinctrl: at91-pio4: Fix slew rate disablement")
the slew-rate is enabled by default for each configured pin. The datasheet
specifies at chapter "Output Driver AC Characteristics" that HSIO
drivers (use in SDMMCx and QSPI0 peripherals), don't have a slewrate
setting but are rather calibrated against an external 1% resistor mounted
on the SDMMCx_CAL or QSPI0_CAL pins. Depending on the target signal
frequency and the external load, it is possible to adjust their target
output impedance. Thus set slew-rate = <0> for SDMMC (QSPI is not enabled
at the moment in device tree).
Fixes:
7540629e2fc7 ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210915074836.6574-3-claudiu.beznea@microchip.com
Claudiu Beznea [Wed, 15 Sep 2021 07:48:35 +0000 (10:48 +0300)]
ARM: dts: at91: sama7g5ek: use proper slew-rate settings for GMACs
Datasheet chapter "EMAC Timings" specifies that while in 3.3V domain
GMAC's MDIO pins should be configured with slew-rate enabled, while the
data + signaling pins should be configured with slew-rate disabled when
GMAC works in RGMII or RMII modes. The pin controller for SAMA7G5 sets
the slew-rate as enabled for all pins. Adapt the device tree to comply
with these.
Fixes:
7540629e2fc7 ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210915074836.6574-2-claudiu.beznea@microchip.com
Claudiu Beznea [Thu, 30 Sep 2021 15:42:19 +0000 (18:42 +0300)]
ARM: at91: pm: preload base address of controllers in tlb
In suspend/resume procedure for AT91 architecture different controllers
(PMC, SHDWC, RAM, RAM PHY, SFRBU) are accessed to do the proper settings
for power saving. Commit
f0bbf17958e8 ("ARM: at91: pm: add self-refresh
support for sama7g5") introduced the access to RAMC PHY controller for
SAMA7G5. The access to this controller is done after RAMC ports are
closed, thus any TLB walk necessary for RAMC PHY virtual address will
fail. In the development branch this was not encountered. However, on
current kernel the issue is reproducible.
To solve the issue the previous mechanism of pre-loading the TLB with
the RAMC PHY virtual address has been used. However, only the addition
of this new pre-load breaks the functionality for ARMv5 based
devices (SAM9X60). This behavior has been encountered previously
while debugging this code and using the same mechanism for pre-loading
address for different controllers (e.g. pin controller, the assumption
being that other requested translations are replaced from TLB).
To solve this new issue the TLB flush + the extension of pre-loading
the rest of controllers to TLB (e.g. PMC, RAMC) has been added. The
rest of the controllers should have been pre-loaded previously, anyway.
Fixes:
f0bbf17958e8 ("ARM: at91: pm: add self-refresh support for sama7g5")
Depends-on:
e42cbbe5c9a2 ("ARM: at91: pm: group constants and addresses loading")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210930154219.2214051-4-claudiu.beznea@microchip.com
Claudiu Beznea [Thu, 30 Sep 2021 15:42:18 +0000 (18:42 +0300)]
ARM: at91: pm: group constants and addresses loading
Group constants and addresses loading. This commit prepares the field for
the next one.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210930154219.2214051-3-claudiu.beznea@microchip.com
Claudiu Beznea [Thu, 30 Sep 2021 15:42:17 +0000 (18:42 +0300)]
ARM: dts: at91: sama7g5ek: add suspend voltage for ddr3l rail
SAMA7G5-EK board has DDR3L type of memory soldered. This needs 1.35V. The
1.35V for DDR3L rail at run-time is selected by the proper configuration
on SELV2 pin (for 1.35V it needs to be in high-z state). When suspended
the MCP16502 PMIC soldered on SAMA7G5-EK will use different sets of
configuration registers to provide proper voltages on its rail. Run-time
configuration registers could be configured differently than suspend
configuration register for MCP16502 (VSEL2 affects only run-time
configuration). In suspend states the DDR3L memory soldered on SAMA7G5-EK
switches to self-refresh. Even on self-refresh it needs to be powered by
a 1.35V rail. Thus, make sure the PMIC is configured properly when system
is suspended.
Fixes:
7540629e2fc7 (ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210930154219.2214051-2-claudiu.beznea@microchip.com
Rob Herring [Fri, 24 Sep 2021 21:42:21 +0000 (16:42 -0500)]
arm: dts: vexpress: Fix motherboard bus 'interrupt-map'
Commit
078fb7aa6a83 ("arm: dts: vexpress: Fix addressing issues with
'motherboard-bus' nodes") broke booting on a couple of 32-bit VExpress
boards. The problem is #address-cells size changed, but interrupt-map
was not updated. This results in the timer interrupt (and all the
other motherboard interrupts) not getting mapped.
As the 'interrupt-map' properties are all just duplicates across boards,
just move them into vexpress-v2m.dtsi and vexpress-v2m-rs1.dtsi.
Strictly speaking, 'interrupt-map' is dependent on the parent
interrupt controller, but it's not likely we'll ever have a different
parent than GICv2 on these old platforms. If there was one,
'interrupt-map' can still be overridden.
Link: https://lore.kernel.org/r/20210924214221.1877686-1-robh@kernel.org
Fixes:
078fb7aa6a83 ("arm: dts: vexpress: Fix addressing issues with 'motherboard-bus' nodes")
Cc: Guillaume Tucker <guillaume.tucker@collabora.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Reported-by: Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Shawn Guo [Tue, 24 Aug 2021 04:34:35 +0000 (12:34 +0800)]
arm64: dts: qcom: sdm630: Add missing a2noc qos clocks
It adds the missing a2noc clocks required for QoS registers programming
per downstream kernel[1].
[1] https://source.codeaurora.org/quic/la/kernel/msm-4.4/tree/arch/arm/boot/dts/qcom/sdm660-bus.dtsi?h=LA.UM.8.2.r1-04800-sdm660.0#n43
Fixes:
045547a02252 ("arm64: dts: qcom: sdm630: Add interconnect provider nodes")
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210824043435.23190-4-shawn.guo@linaro.org
Dmitry Baryshkov [Thu, 16 Sep 2021 15:13:41 +0000 (18:13 +0300)]
arm64: dts: qcom: qrb5165-rb5: enabled pwrkey and resin nodes
Enable powerkey and resin nodes to let the board handle POWER and
Volume- keys properly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210916151341.1797512-3-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Thu, 16 Sep 2021 15:13:40 +0000 (18:13 +0300)]
arm64: dts: qcom: pm8150: specify reboot mode magics
Specify recovery and bootloader magic values to be programmed by the
qcom-pon driver. This allows the bootloader to handle
reboot-to-bootloader functionality.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210916151341.1797512-2-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Thu, 16 Sep 2021 15:13:39 +0000 (18:13 +0300)]
arm64: dts: qcom: pm8150: use qcom,pm8998-pon binding
Change pm8150 to use the qcom,pm8998-pon compatible string for the pon
in order to pass reboot mode properly.
Fixes:
5101f22a5c37 ("arm64: dts: qcom: pm8150: Add base dts file")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210916151341.1797512-1-dmitry.baryshkov@linaro.org
Stephen Boyd [Wed, 11 Aug 2021 22:41:41 +0000 (15:41 -0700)]
arm64: dts: qcom: sc7180-trogdor: Fix lpass dai link for HDMI
This should be the dai for display port. Without this set properly we
fail to get audio routed through external displays on trogdor. It looks
like we picked up v4[1] of this patch when there was a v7[2]. The v7
patch still had the wrong sound-dai but at least we can fix all this up
and audio works.
Cc: Srinivasa Rao Mandadapu <srivasam@qti.qualcomm.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Douglas Anderson <dianders@chromium.org>
Fixes:
b22d313e1772 ("arm64: dts: qcom: sc7180-trogdor: Add lpass dai link for HDMI")
Link: https://lore.kernel.org/r/20210721080549.28822-3-srivasam@qti.qualcomm.com
Link: https://lore.kernel.org/r/20210726120910.20335-3-srivasam@codeaurora.org
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210811224141.1110495-1-swboyd@chromium.org
David Heidelberg [Sun, 29 Aug 2021 13:39:17 +0000 (15:39 +0200)]
ARM: dts: qcom: apq8064: update Adreno clock names
The legacy clock names (including the _clk suffix) was dropped from the
driver, so update the dts accordingly).
Tested on Nexus 7 2013, no functional changes.
Signed-off-by: David Heidelberg <david@ixit.cz>
[bjorn: Updated commit message]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210829133918.57780-2-david@ixit.cz
Geert Uytterhoeven [Tue, 24 Aug 2021 12:27:41 +0000 (14:27 +0200)]
firmware: qcom_scm: QCOM_SCM should depend on ARCH_QCOM
The Qualcomm Secure Channel Manager (SCM) is only present on Qualcomm
SoCs. All drivers using it select QCOM_SCM, and depend on ARCH_QCOM.
Until recently, QCOM_SCM was an invisible symbol, but this was changed
by adding loadable module support, exposing it to all ARM and ARM64
users. Hence add a dependency on ARCH_QCOM, to prevent asking the user
about this driver when configuring a kernel without Qualcomm SoC
support.
While at it, drop the dependency on ARM || ARM64, as that is implied by
HAVE_ARM_SMCCC.
Fixes:
b42000e4b8741bf6 ("firmware: qcom_scm: Allow qcom_scm driver to be loadable as a permenent module")
Fixes:
2954a6f12f250890 ("firmware: qcom-scm: Fix QCOM_SCM configuration")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/5cda77085c07dc2e8d2195507b287457cb2f09e9.1629807831.git.geert+renesas@glider.be
Shawn Guo [Sat, 28 Aug 2021 07:02:02 +0000 (15:02 +0800)]
soc: qcom: mdt_loader: Drop PT_LOAD check on hash segment
PT_LOAD type denotes that the segment should be loaded into the final
firmware memory region. Hash segment is not one such, because it's only
needed for PAS init and shouldn't be in the final firmware memory region.
That's why mdt_phdr_valid() explicitly reject non PT_LOAD segment and
hash segment. This actually makes the hash segment type check in
qcom_mdt_read_metadata() unnecessary and redundant. For a hash segment,
it won't be loaded into firmware memory region anyway, due to the
QCOM_MDT_TYPE_HASH check in mdt_phdr_valid(), even if it has a PT_LOAD
type for some reason (misusing or abusing?).
Some firmware files on Sony phones are such examples, e.g WCNSS firmware
of Sony Xperia M4 Aqua phone. The type of hash segment is just PT_LOAD.
Drop the unnecessary hash segment type check in qcom_mdt_read_metadata()
to fix firmware loading failure on these phones, while hash segment is
still kept away from the final firmware memory region.
Fixes:
498b98e93900 ("soc: qcom: mdt_loader: Support loading non-split images")
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210828070202.7033-1-shawn.guo@linaro.org
Amit Pundir [Thu, 16 Sep 2021 20:05:54 +0000 (01:35 +0530)]
arm64: dts: qcom: sdm850-yoga: Reshuffle IPA memory mappings
Upstream commit
2e01e0c21459 ("arm64: dts: qcom: sdm850-yoga:
Enable IPA") shuffled reserved memory regions in sdm845.dtsi
to make firmware loading succeed and enable the ipa device on
sdm845-yoga but it broke the other common users of those
memory regions like Xiaomi Pocophone F1.
So this patch effectively revert those upstream commit changes
and move all the relevant changes to sdm850-lenovo-yoga-c630.dts
instead.
Fixes:
2e01e0c21459 ("arm64: dts: qcom: sdm850-yoga: Enable IPA")
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210916200554.2434439-1-amit.pundir@linaro.org
Rob Herring [Thu, 19 Aug 2021 18:42:39 +0000 (13:42 -0500)]
arm: dts: vexpress: Fix addressing issues with 'motherboard-bus' nodes
The 'motherboard-bus' node in Arm Ltd boards fails schema checks as
'simple-bus' child nodes must have a unit-address. The 'ranges' handling is
also wrong (or at least strange) as the mapping of SMC chip selects should
be in the 'arm,vexpress,v2m-p1' node rather than a generic 'simple-bus'
node. Either there's 1 too many levels of 'simple-bus' nodes or 'ranges'
should be moved down a level. The latter change is more simple, so let's do
that. As the 'ranges' value doesn't vary for a given motherboard instance,
we can move 'ranges' into the motherboard dtsi files.
Link: https://lore.kernel.org/r/20210819184239.1192395-6-robh@kernel.org
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Arnd Bergmann [Tue, 14 Sep 2021 16:35:12 +0000 (18:35 +0200)]
Merge tag 'at91-fixes-5.15' of git://git./linux/kernel/git/at91/linux into arm/fixes
AT91 fixes #1 for 5.15:
- Fixes for newly introduced SAMA7G5 and its Power Management code.
Associated core peripherals need to be instantiated in DT for
benefiting from best PM support like Backup mode with DDR in
Self-Refresh.
- Add chip ID for SAMA7G5 for easing the kernel log identification.
- Avoid Camera Sensor probe error on sama5d27 som1 ek board.
* tag 'at91-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sama5d2_som1_ek: disable ISC node by default
ARM: at91: pm: switch backup area to vbat in backup mode
ARM: dts: at91: sama7g5: add chipid
ARM: dts: at91: sama7g5: add shdwc node
ARM: dts: at91: sama7g5: add securam node
ARM: dts: at91: sama7g5: add ram controllers
ARM: at91: pm: do not panic if ram controllers are not enabled
Link: https://lore.kernel.org/r/20210914162314.54347-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Romain Perier [Fri, 10 Sep 2021 19:03:22 +0000 (21:03 +0200)]
MAINTAINERS: Add myself as MStar/Sigmastar Armv7 SoC maintainers
As proposed by Daniel, I am going to help him to maintain the platform,
so add myself as co-maintainer.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Daniel Palmer <daniel@thingy.jp>
Link: https://lore.kernel.org/r/20210910190322.27058-5-romain.perier@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Eugen Hristev [Thu, 2 Sep 2021 12:13:58 +0000 (15:13 +0300)]
ARM: dts: at91: sama5d2_som1_ek: disable ISC node by default
Without a sensor node, the ISC will simply fail to probe, as the
corresponding port node is missing.
It is then logical to disable the node in the devicetree.
If we add a port with a connection to a sensor endpoint, ISC can be enabled.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210902121358.503589-1-eugen.hristev@microchip.com
Claudiu Beznea [Mon, 30 Aug 2021 10:09:27 +0000 (13:09 +0300)]
ARM: at91: pm: switch backup area to vbat in backup mode
Backup area is now switched to VDDIN33 at boot (with the help of
bootloader). When switching to backup mode we need to switch backup area
to VBAT as all the other power sources are cut off. The resuming from
backup mode is done with the help of bootloader, so there is no need to
do something particular in Linux to restore backup area power source.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210830100927.22711-1-claudiu.beznea@microchip.com
Claudiu Beznea [Wed, 8 Sep 2021 09:43:29 +0000 (12:43 +0300)]
ARM: dts: at91: sama7g5: add chipid
Add chipid node for sama7g5.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210908094329.182477-1-claudiu.beznea@microchip.com
Claudiu Beznea [Mon, 23 Aug 2021 13:19:15 +0000 (16:19 +0300)]
ARM: dts: at91: sama7g5: add shdwc node
Add shutdown controller node and enable it.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210823131915.23857-5-claudiu.beznea@microchip.com
Claudiu Beznea [Mon, 23 Aug 2021 13:19:14 +0000 (16:19 +0300)]
ARM: dts: at91: sama7g5: add securam node
Add securam node.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210823131915.23857-4-claudiu.beznea@microchip.com
Claudiu Beznea [Mon, 23 Aug 2021 13:19:13 +0000 (16:19 +0300)]
ARM: dts: at91: sama7g5: add ram controllers
Add RAM and RAMC PHY controllers. These are necessary for platform
specific power management code.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210823131915.23857-3-claudiu.beznea@microchip.com
Claudiu Beznea [Mon, 23 Aug 2021 13:19:12 +0000 (16:19 +0300)]
ARM: at91: pm: do not panic if ram controllers are not enabled
In case PM is enabled but there is no RAM controller information
in DT the code will panic. Avoid such scenarios by not initializing
platform specific PM code in case RAM controller is not provided
via DT.
Reported-by: Eugen Hristev <eugen.hristev@microchip.com>
Fixes:
827de1f123ba0 ("ARM: at91: remove at91_dt_initialize and machine init_early()")
Fixes:
892e1f4a3ae58 ("ARM: at91: pm: add sama7g5 ddr phy controller")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210823131915.23857-2-claudiu.beznea@microchip.com
Joel Stanley [Tue, 15 Jun 2021 01:14:34 +0000 (10:44 +0930)]
ARM: config: mutli v7: Reenable FB dependency
DRM_FBDEV_EMULATION previously selected FB and was default y as long as DRM
was enabled. In commit
f611b1e7624c ("drm: Avoid circular dependencies for
CONFIG_FB") the select was replaced with a depends on FB, disabling the
drivers that depended on it.
Renable FB so we get back FB_EFI, FB_WM8505, FB_SH_MOBILE_LCDC, FB_SIMPLE and
VIDEO_VIVID.
It must be set to y and not a module as the test driver VIDEO_VIVID
requires it to be built in.
Link: https://lore.kernel.org/r/CAK8P3a18EdBKQdGDOZc9cPKsf=hY8==v2cO0DBE_tyd82Uq-Ng@mail.gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Joel Stanley [Tue, 15 Jun 2021 01:14:33 +0000 (10:44 +0930)]
ARM: config: multi v7: Enable dependancies
Some drivers have not been built as they gained dependencies in kconfig but those
dependencies were not added to the defconfig.
The MSM pinctrl drivers fell out of the defconfig as of commit
be117ca32261
("pinctrl: qcom: Kconfig: Rework PINCTRL_MSM to be a depenency rather then a
selected config"). Add PINCTRL_MSM so these stay enabled.
EDAC depends on RAS, so enable it to ensure the EDAC drivers stay
enabled.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Rob Herring [Thu, 19 Aug 2021 18:42:38 +0000 (13:42 -0500)]
arm: dts: vexpress-v2p-ca9: Fix the SMB unit-address
Based on 'ranges', the 'bus@4000000' node unit-address is off by 1 '0'.
Link: https://lore.kernel.org/r/20210819184239.1192395-5-robh@kernel.org
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Rob Herring [Thu, 19 Aug 2021 18:42:37 +0000 (13:42 -0500)]
arm: dts: vexpress: Drop unused properties from motherboard node
Drop the '#interrupt-cells' property in the motherboard node which has no
effect as the node is neither an interrupt-controller or interrupt-map
(that's in the parent node).
Drop 'model' as it is not used by software nor documented.
Drop 'arm,v2m-memory-map' as it is not used by software. The purpose was
to describe which memory map, but that's all described by the DT
already.
Link: https://lore.kernel.org/r/20210819184239.1192395-4-robh@kernel.org
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Krzysztof Kozlowski [Fri, 20 Aug 2021 08:17:33 +0000 (10:17 +0200)]
arm64: dts: arm: drop unused interrupt-names in MHU
The arm,mhu bindings and driver do not define interrupt-names, so drop
the property to fix warnings:
arch/arm64/boot/dts/arm/juno-r2.dt.yaml: mhu@
2b1f0000: 'interrupt-names' does not match any of the regexes: 'pinctrl-[0-9]+'
Link: https://lore.kernel.org/r/20210820081733.83976-3-krzysztof.kozlowski@canonical.com
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Krzysztof Kozlowski [Fri, 20 Aug 2021 08:17:32 +0000 (10:17 +0200)]
ARM: dts: arm: align watchdog and mmc node names with dtschema
Align the watchdog and mmc device node names with the schema to fix
warnings like:
mmci@50000: $nodename:0: 'mmci@50000' does not match '^mmc(@.*)?$'
wdt@f0000: $nodename:0: 'wdt@f0000' does not match '^watchdog(@.*|-[0-9a-f])?$'
Link: https://lore.kernel.org/r/20210820081733.83976-2-krzysztof.kozlowski@canonical.com
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Krzysztof Kozlowski [Fri, 20 Aug 2021 08:17:31 +0000 (10:17 +0200)]
arm64: dts: arm: align watchdog and mmc node names with dtschema
Align the watchdog and mmc device node names with the schema to fix
warnings like:
mmci@50000: $nodename:0: 'mmci@50000' does not match '^mmc(@.*)?$'
wdt@f0000: $nodename:0: 'wdt@f0000' does not match '^watchdog(@.*|-[0-9a-f])?$'
Link: https://lore.kernel.org/r/20210820081733.83976-1-krzysztof.kozlowski@canonical.com
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
jing yangyang [Fri, 20 Aug 2021 03:21:27 +0000 (20:21 -0700)]
tee/optee/shm_pool: fix application of sizeof to pointer
sizeof when applied to a pointer typed expression gives the size of
the pointer.
./drivers/tee/optee/shm_pool.c:38:28-34: ERROR application of sizeof to pointer
This issue was detected with the help of Coccinelle.
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: jing yangyang <jing.yangyang@zte.com.cn>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Douglas Anderson [Tue, 7 Sep 2021 19:12:25 +0000 (12:12 -0700)]
Revert "arm64: dts: qcom: sc7280: Fixup the cpufreq node"
This reverts commit
11e03d692101e484df9322f892a8b6e111a82bfd.
As per discussion [1] the patch shouldn't have landed. Let's revert.
[1] https://lore.kernel.org/r/
fde7bac239f796b039b9be58b391fb77@codeaurora.org/
Fixes:
11e03d692101 ("arm64: dts: qcom: sc7280: Fixup the cpufreq node")
Reported-by: Matthias Kaehlcke <mka@chromium.org>
Cc: Sibi Sankar <sibis@codeaurora.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210907121220.1.I08460f490473b70de0d768db45f030a4d5c17828@changeid
Marijn Suijten [Sun, 29 Aug 2021 20:30:25 +0000 (22:30 +0200)]
ARM: dts: qcom: apq8064: Use 27MHz PXO clock as DSI PLL reference
The 28NM DSI PLL driver for msm8960 calculates with a 27MHz reference
clock and should hence use PXO, not CXO which runs at 19.2MHz.
Note that none of the DSI PHY/PLL drivers currently use this "ref"
clock; they all rely on (sometimes inexistant) global clock names and
usually function normally without a parent clock. This discrepancy will
be corrected in a future patch, for which this change needs to be in
place first.
Fixes:
6969d1d9c615 ("ARM: dts: qcom-apq8064: Set 'cxo_board' as ref clock of the DSI PHY")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20210829203027.276143-2-marijn.suijten@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
David Heidelberg [Wed, 18 Aug 2021 06:53:17 +0000 (08:53 +0200)]
ARM: dts: qcom: apq8064: use compatible which contains chipid
Also resolves these kernel warnings for APQ8064:
adreno 4300000.adreno-3xx: Using legacy qcom,chipid binding!
adreno 4300000.adreno-3xx: Use compatible qcom,adreno-320.2 instead.
Tested on Nexus 7 2013, no functional changes.
Cc: <stable@vger.kernel.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20210818065317.19822-1-david@ixit.cz
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Antonio Martorana [Tue, 17 Aug 2021 00:24:39 +0000 (17:24 -0700)]
soc: qcom: socinfo: Fixed argument passed to platform_set_data()
Set qcom_socinfo pointer as data being stored instead of pointer
to soc_device structure. Aligns with future calls to platform_get_data()
which expects qcom_socinfo pointer.
Fixes:
efb448d0a3fc ("soc: qcom: Add socinfo driver")
Signed-off-by: Antonio Martorana <amartora@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1629159879-95777-1-git-send-email-amartora@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Robin Murphy [Wed, 14 Jul 2021 17:22:38 +0000 (18:22 +0100)]
arm64: dts: fvp: Remove panel timings
The simple-panel driver already has hard-coded timings for
"arm,rtsm-display", and as such screams at us for trying to override a
fixed mode from DT. Since the exact values probably don't matter all
that much anyway, just remove the DT node to keep boot quiet.
Link: https://lore.kernel.org/r/2701c187cf8e0762df38f68cc069ec2c29a3b5a9.1626283322.git.robin.murphy@arm.com
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Linus Torvalds [Sun, 12 Sep 2021 23:28:37 +0000 (16:28 -0700)]
Linux 5.15-rc1
Linus Torvalds [Sun, 12 Sep 2021 23:18:15 +0000 (16:18 -0700)]
Merge tag 'perf-tools-for-v5.15-2021-09-11' of git://git./linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
- Add missing fields and remove some duplicate fields when printing a
perf_event_attr.
- Fix hybrid config terms list corruption.
- Update kernel header copies, some resulted in new kernel features
being automagically added to 'perf trace' syscall/tracepoint argument
id->string translators.
- Add a file generated during the documentation build to .gitignore.
- Add an option to build without libbfd, as some distros, like Debian
consider its ABI unstable.
- Add support to print a textual representation of IBS raw sample data
in 'perf report'.
- Fix bpf 'perf test' sample mismatch reporting
- Fix passing arguments to stackcollapse report in a 'perf script'
python script.
- Allow build-id with trailing zeros.
- Look for ImageBase in PE file to compute .text offset.
* tag 'perf-tools-for-v5.15-2021-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (25 commits)
tools headers UAPI: Update tools's copy of drm.h headers
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
tools headers UAPI: Sync linux/fs.h with the kernel sources
tools headers UAPI: Sync linux/in.h copy with the kernel sources
perf tools: Add an option to build without libbfd
perf tools: Allow build-id with trailing zeros
perf tools: Fix hybrid config terms list corruption
perf tools: Factor out copy_config_terms() and free_config_terms()
perf tools: Fix perf_event_attr__fprintf() missing/dupl. fields
perf tools: Ignore Documentation dependency file
perf bpf: Provide a weak btf__load_from_kernel_by_id() for older libbpf versions
tools include UAPI: Update linux/mount.h copy
perf beauty: Cover more flags in the move_mount syscall argument beautifier
tools headers UAPI: Sync linux/prctl.h with the kernel sources
tools include UAPI: Sync sound/asound.h copy with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
perf report: Add support to print a textual representation of IBS raw sample data
perf report: Add tools/arch/x86/include/asm/amd-ibs.h
perf env: Add perf_env__cpuid, perf_env__{nr_}pmu_mappings
...
Linus Torvalds [Sun, 12 Sep 2021 23:09:26 +0000 (16:09 -0700)]
Merge tag 'compiler-attributes-for-linus-v5.15-rc1-v2' of git://github.com/ojeda/linux
Pull compiler attributes updates from Miguel Ojeda:
- Fix __has_attribute(__no_sanitize_coverage__) for GCC 4 (Marco Elver)
- Add Nick as Reviewer for compiler_attributes.h (Nick Desaulniers)
- Move __compiletime_{error|warning} (Nick Desaulniers)
* tag 'compiler-attributes-for-linus-v5.15-rc1-v2' of git://github.com/ojeda/linux:
compiler_attributes.h: move __compiletime_{error|warning}
MAINTAINERS: add Nick as Reviewer for compiler_attributes.h
Compiler Attributes: fix __has_attribute(__no_sanitize_coverage__) for GCC 4
Linus Torvalds [Sun, 12 Sep 2021 23:00:49 +0000 (16:00 -0700)]
Merge tag 'auxdisplay-for-linus-v5.15-rc1' of git://github.com/ojeda/linux
Pull auxdisplay updates from Miguel Ojeda:
"An assortment of improvements for auxdisplay:
- Replace symbolic permissions with octal permissions (Jinchao Wang)
- ks0108: Switch to use module_parport_driver() (Andy Shevchenko)
- charlcd: Drop unneeded initializers and switch to C99 style (Andy
Shevchenko)
- hd44780: Fix oops on module unloading (Lars Poeschel)
- Add I2C gpio expander example (Ralf Schlatterbeck)"
* tag 'auxdisplay-for-linus-v5.15-rc1' of git://github.com/ojeda/linux:
auxdisplay: Replace symbolic permissions with octal permissions
auxdisplay: ks0108: Switch to use module_parport_driver()
auxdisplay: charlcd: Drop unneeded initializers and switch to C99 style
auxdisplay: hd44780: Fix oops on module unloading
auxdisplay: Add I2C gpio expander example
Linus Torvalds [Sun, 12 Sep 2021 19:42:51 +0000 (12:42 -0700)]
Merge tag 'smp-urgent-2021-09-12' of git://git./linux/kernel/git/tip/tip
Pull CPU hotplug updates from Thomas Gleixner:
"Updates for the SMP and CPU hotplug:
- Remove DEFINE_SMP_CALL_CACHE_FUNCTION() which is a left over of the
original hotplug code and now causing trouble with the ARM64 cache
topology setup due to the pointless SMP function call.
It's not longer required as the hotplug callbacks are guaranteed to
be invoked on the upcoming CPU.
- Remove the deprecated and now unused CPU hotplug functions
- Rewrite the CPU hotplug API documentation"
* tag 'smp-urgent-2021-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation: core-api/cpuhotplug: Rewrite the API section
cpu/hotplug: Remove deprecated CPU-hotplug functions.
thermal: Replace deprecated CPU-hotplug functions.
drivers: base: cacheinfo: Get rid of DEFINE_SMP_CALL_CACHE_FUNCTION()
Linus Torvalds [Sun, 12 Sep 2021 18:56:00 +0000 (11:56 -0700)]
Merge tag 'char-misc-5.15-rc1-lkdtm' of git://git./linux/kernel/git/gregkh/char-misc
Pull misc driver fix from Greg KH:
"Here is a single patch for 5.15-rc1, for the lkdtm misc driver.
It resolves a build issue that many people were hitting with your
current tree, and Kees and others felt would be good to get merged
before -rc1 comes out, to prevent them from having to constantly hit
it as many development trees restart on -rc1, not older -rc releases.
It has NOT been in linux-next, but has passed 0-day testing and looks
'obviously correct' when reviewing it locally :)"
* tag 'char-misc-5.15-rc1-lkdtm' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
lkdtm: Use init_uts_ns.name instead of macros
Linus Torvalds [Sun, 12 Sep 2021 18:44:58 +0000 (11:44 -0700)]
Merge tag 'for-linus-5.15-1' of git://github.com/cminyard/linux-ipmi
Pull IPMI updates from Corey Minyard:
"A couple of very minor fixes for style and rate limiting.
Nothing big, but probably needs to go in"
* tag 'for-linus-5.15-1' of git://github.com/cminyard/linux-ipmi:
char: ipmi: use DEVICE_ATTR helper macro
ipmi: rate limit ipmi smi_event failure message
Linus Torvalds [Sun, 12 Sep 2021 18:37:41 +0000 (11:37 -0700)]
Merge tag 'sched_urgent_for_v5.15_rc1' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Make sure the idle timer expires in hardirq context, on PREEMPT_RT
- Make sure the run-queue balance callback is invoked only on the
outgoing CPU
* tag 'sched_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Prevent balance_push() on remote runqueues
sched/idle: Make the idle timer expire in hard interrupt context
Linus Torvalds [Sun, 12 Sep 2021 18:27:05 +0000 (11:27 -0700)]
Merge tag 'locking_urgent_for_v5.15_rc1' of git://git./linux/kernel/git/tip/tip
Pull locking fixes from Borislav Petkov:
- Fix the futex PI requeue machinery to not return to userspace in
inconsistent state
- Avoid a potential null pointer dereference in the ww_mutex deadlock
check
- Other smaller cleanups and optimizations
* tag 'locking_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rtmutex: Fix ww_mutex deadlock check
futex: Remove unused variable 'vpid' in futex_proxy_trylock_atomic()
futex: Avoid redundant task lookup
futex: Clarify comment for requeue_pi_wake_futex()
futex: Prevent inconsistent state and exit race
futex: Return error code instead of assigning it without effect
locking/rwsem: Add missing __init_rwsem() for PREEMPT_RT
Linus Torvalds [Sun, 12 Sep 2021 18:10:31 +0000 (11:10 -0700)]
Merge tag 'timers_urgent_for_v5.15_rc1' of git://git./linux/kernel/git/tip/tip
Pull timer fix from Borislav Petkov:
- Handle negative second values properly when converting a timespec64
to nanoseconds.
* tag 'timers_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Handle negative seconds correctly in timespec64_to_ns()
Linus Torvalds [Sun, 12 Sep 2021 17:43:51 +0000 (10:43 -0700)]
Merge branch 'misc.namei' of git://git./linux/kernel/git/viro/vfs
Pull namei updates from Al Viro:
"Clearing fallout from mkdirat in io_uring series. The fix in the
kern_path_locked() patch plus associated cleanups"
* 'misc.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
putname(): IS_ERR_OR_NULL() is wrong here
namei: Standardize callers of filename_create()
namei: Standardize callers of filename_lookup()
rename __filename_parentat() to filename_parentat()
namei: Fix use after free in kern_path_locked
Linus Torvalds [Sun, 12 Sep 2021 17:10:21 +0000 (10:10 -0700)]
Merge tag '5.15-rc-cifs-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull smbfs updates from Steve French:
"cifs/smb3 updates:
- DFS reconnect fix
- begin creating common headers for server and client
- rename the cifs_common directory to smbfs_common to be more
consistent ie change use of the name cifs to smb (smb3 or smbfs is
more accurate, as the very old cifs dialect has long been
superseded by smb3 dialects).
In the future we can rename the fs/cifs directory to fs/smbfs.
This does not include the set of multichannel fixes nor the two
deferred close fixes (they are still being reviewed and tested)"
* tag '5.15-rc-cifs-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: properly invalidate cached root handle when closing it
cifs: move SMB FSCTL definitions to common code
cifs: rename cifs_common to smbfs_common
cifs: update FSCTL definitions
Linus Torvalds [Sat, 11 Sep 2021 21:48:42 +0000 (14:48 -0700)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- vduse driver ("vDPA Device in Userspace") supporting emulated virtio
block devices
- virtio-vsock support for end of record with SEQPACKET
- vdpa: mac and mq support for ifcvf and mlx5
- vdpa: management netlink for ifcvf
- virtio-i2c, gpio dt bindings
- misc fixes and cleanups
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (39 commits)
Documentation: Add documentation for VDUSE
vduse: Introduce VDUSE - vDPA Device in Userspace
vduse: Implement an MMU-based software IOTLB
vdpa: Support transferring virtual addressing during DMA mapping
vdpa: factor out vhost_vdpa_pa_map() and vhost_vdpa_pa_unmap()
vdpa: Add an opaque pointer for vdpa_config_ops.dma_map()
vhost-iotlb: Add an opaque pointer for vhost IOTLB
vhost-vdpa: Handle the failure of vdpa_reset()
vdpa: Add reset callback in vdpa_config_ops
vdpa: Fix some coding style issues
file: Export receive_fd() to modules
eventfd: Export eventfd_wake_count to modules
iova: Export alloc_iova_fast() and free_iova_fast()
virtio-blk: remove unneeded "likely" statements
virtio-balloon: Use virtio_find_vqs() helper
vdpa: Make use of PFN_PHYS/PFN_UP/PFN_DOWN helper macro
vsock_test: update message bounds test for MSG_EOR
af_vsock: rename variables in receive loop
virtio/vsock: support MSG_EOR bit processing
vhost/vsock: support MSG_EOR bit processing
...
Linus Torvalds [Sat, 11 Sep 2021 21:29:42 +0000 (14:29 -0700)]
Merge tag 'riscv-for-linus-5.15-mw1' of git://git./linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- A pair of defconfig additions, for NVMe and the EFI filesystem
localization options.
- A larger address space for stack randomization.
- A cleanup to our install rules.
- A DTS update for the Microchip Icicle board, to fix the serial
console.
- Support for build-time table sorting, which allows us to have
__ex_table read-only.
* tag 'riscv-for-linus-5.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Move EXCEPTION_TABLE to RO_DATA segment
riscv: Enable BUILDTIME_TABLE_SORT
riscv: dts: microchip: mpfs-icicle: Fix serial console
riscv: move the (z)install rules to arch/riscv/Makefile
riscv: Improve stack randomisation on RV64
riscv: defconfig: enable NLS_CODEPAGE_437, NLS_ISO8859_1
riscv: defconfig: enable BLK_DEV_NVME
Linus Torvalds [Sat, 11 Sep 2021 21:22:28 +0000 (14:22 -0700)]
Merge branch 'for-5.15' of git://git./linux/kernel/git/jlawall/linux
Pull coccinelle updates from Julia Lawall:
"These changes update some existing semantic patches with
respect to some recent changes in the kernel.
Specifically, the change to kvmalloc.cocci searches for
kfree_sensitive rather than kzfree, and the change to
use_after_iter.cocci adds list_entry_is_head as a valid
use of a list iterator index variable after the end of
the loop"
* 'for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
scripts: coccinelle: allow list_entry_is_head() to use pos
coccinelle: api: rename kzfree to kfree_sensitive
Arnaldo Carvalho de Melo [Mon, 3 May 2021 14:48:26 +0000 (11:48 -0300)]
tools headers UAPI: Update tools's copy of drm.h headers
Picking the changes from:
17ce9c61c71cbc0d ("drm: document DRM_IOCTL_MODE_RMFB")
Doesn't result in any tooling changes:
$ tools/perf/trace/beauty/drm_ioctl.sh > before
$ cp include/uapi/drm/drm.h tools/include/uapi/drm/drm.h
$ tools/perf/trace/beauty/drm_ioctl.sh > after
$ diff -u before after
Silencing these perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/drm/drm.h' differs from latest version at 'include/uapi/drm/drm.h'
diff -u tools/include/uapi/drm/drm.h include/uapi/drm/drm.h
Cc: Simon Ser <contact@emersion.fr>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sat, 11 Sep 2021 19:18:28 +0000 (16:18 -0300)]
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
To pick the changes in:
b65a9489730a2494 ("drm/i915/userptr: Probe existence of backing struct pages upon creation")
ee242ca704d38699 ("drm/i915/guc: Implement GuC priority management")
81340cf3bddded4f ("drm/i915/uapi: reject set_domain for discrete")
7961c5b60f23dff5 ("drm/i915: Add TTM offset argument to mmap.")
aef7b67a79564f6c ("drm/i915/uapi: convert drm_i915_gem_userptr to kernel doc")
e7737b67ab46ee0e ("drm/i915/uapi: reject caching ioctls for discrete")
3aa8c57fe25a9247 ("drm/i915/uapi: convert drm_i915_gem_set_domain to kernel doc")
289f5a72009b8f67 ("drm/i915/uapi: convert drm_i915_gem_caching to kernel doc")
4a766ae40ec83301 ("drm/i915: Drop the CONTEXT_CLONE API (v2)")
6ff6d61dd2a943bd ("drm/i915: Drop I915_CONTEXT_PARAM_NO_ZEROMAP")
fe4751c3d513ff4f ("drm/i915: Drop I915_CONTEXT_PARAM_RINGSIZE")
577729533cdc4e37 ("drm/i915: Document the Virtual Engine uAPI")
c649432e86ca677d ("drm/i915: Fix busy ioctl commentary")
That doesn't result in any changes to tooling as no new ioctl were
added (at least not perceived by tools/perf/trace/beauty/drm_ioctl.sh).
Addressing this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 21 May 2021 19:00:31 +0000 (16:00 -0300)]
tools headers UAPI: Sync linux/fs.h with the kernel sources
To pick the change in:
7957d93bf32bc211 ("block: add ioctl to read the disk sequence number")
It adds a new ioctl, but we are still not using that to generate tables
for 'perf trace', so no changes in tooling.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/fs.h' differs from latest version at 'include/uapi/linux/fs.h'
diff -u tools/include/uapi/linux/fs.h include/uapi/linux/fs.h
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sat, 19 Jun 2021 13:15:22 +0000 (10:15 -0300)]
tools headers UAPI: Sync linux/in.h copy with the kernel sources
To pick the changes in:
db243b796439c0ca ("net/ipv4/ipv6: Replace one-element arraya with flexible-array members")
2d3e5caf96b9449a ("net/ipv4: Replace one-element array with flexible-array member")
That don't result in any change in tooling, the structs changed remains
with the same layout.
This addresses this build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/in.h' differs from latest version at 'include/uapi/linux/in.h'
diff -u tools/include/uapi/linux/in.h include/uapi/linux/in.h
Cc: David S. Miller <davem@davemloft.net>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Fri, 10 Sep 2021 22:57:56 +0000 (15:57 -0700)]
perf tools: Add an option to build without libbfd
Some distributions, like debian, don't link perf with libbfd. Add a
build flag to make this configuration buildable and testable.
This was inspired by:
https://lore.kernel.org/linux-perf-users/
20210910102307.2055484-1-tonyg@leastfixedpoint.com/T/#u
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: tony garnock-jones <tonyg@leastfixedpoint.com>
Link: http://lore.kernel.org/lkml/20210910225756.729087-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Fri, 10 Sep 2021 22:46:30 +0000 (15:46 -0700)]
perf tools: Allow build-id with trailing zeros
Currently perf saves a build-id with size but old versions assumes the
size of 20. In case the build-id is less than 20 (like for MD5), it'd
fill the rest with 0s.
I saw a problem when old version of perf record saved a binary in the
build-id cache and new version of perf reads the data. The symbols
should be read from the build-id cache (as the path no longer has the
same binary) but it failed due to mismatch in the build-id.
symsrc__init: build id mismatch for /home/namhyung/.debug/.build-id/53/
e4c2f42a4c61a2d632d92a72afa08f00000000/elf.
The build-id event in the data has 20 byte build-ids, but it saw a
different size (16) when it reads the build-id of the elf file in the
build-id cache.
$ readelf -n ~/.debug/.build-id/53/
e4c2f42a4c61a2d632d92a72afa08f00000000/elf
Displaying notes found in: .note.gnu.build-id
Owner Data size Description
GNU 0x00000010 NT_GNU_BUILD_ID (unique build ID bitstring)
Build ID:
53e4c2f42a4c61a2d632d92a72afa08f
Let's fix this by allowing trailing zeros if the size is different.
Fixes:
39be8d0115b321ed ("perf tools: Pass build_id object to dso__build_id_equal()")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210910224630.1084877-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Thu, 9 Sep 2021 12:55:08 +0000 (15:55 +0300)]
perf tools: Fix hybrid config terms list corruption
A config terms list was spliced twice, resulting in a never-ending loop
when the list was traversed. Fix by using list_splice_init() and copying
and freeing the lists as necessary.
This patch also depends on patch "perf tools: Factor out
copy_config_terms() and free_config_terms()"
Example on ADL:
Before:
# perf record -e '{intel_pt//,cycles/aux-sample-size=4096/pp}' uname &
# jobs
[1]+ Running perf record -e "{intel_pt//,cycles/aux-sample-size=4096/pp}" uname
# perf top -E 10
PerfTop: 4071 irqs/sec kernel: 6.9% exact: 100.0% lost: 0/0 drop: 0/0 [4000Hz cycles], (all, 24 CPUs)
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
97.60% perf [.] __evsel__get_config_term
0.25% [kernel] [k] kallsyms_expand_symbol.constprop.13
0.24% perf [.] kallsyms__parse
0.15% [kernel] [k] _raw_spin_lock
0.14% [kernel] [k] number
0.13% [kernel] [k] advance_transaction
0.08% [kernel] [k] format_decode
0.08% perf [.] map__process_kallsym_symbol
0.08% perf [.] rb_insert_color
0.08% [kernel] [k] vsnprintf
exiting.
# kill %1
After:
# perf record -e '{intel_pt//,cycles/aux-sample-size=4096/pp}' uname &
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.060 MB perf.data ]
# perf script | head
perf-exec 604 [001] 1827.312293: psb: psb offs: 0
ffffffffb8415e87 pt_config_start+0x37 ([kernel.kallsyms])
perf-exec 604 1827.312293: 1 branches:
ffffffffb856a3bd event_sched_in.isra.133+0xfd ([kernel.kallsyms]) =>
ffffffffb856a9a0 perf_pmu_nop_void+0x0 ([kernel.kallsyms])
perf-exec 604 1827.312293: 1 branches:
ffffffffb856b10e merge_sched_in+0x26e ([kernel.kallsyms]) =>
ffffffffb856a2c0 event_sched_in.isra.133+0x0 ([kernel.kallsyms])
perf-exec 604 1827.312293: 1 branches:
ffffffffb856a45d event_sched_in.isra.133+0x19d ([kernel.kallsyms]) =>
ffffffffb8568b80 perf_event_set_state.part.61+0x0 ([kernel.kallsyms])
perf-exec 604 1827.312293: 1 branches:
ffffffffb8568b86 perf_event_set_state.part.61+0x6 ([kernel.kallsyms]) =>
ffffffffb85662a0 perf_event_update_time+0x0 ([kernel.kallsyms])
perf-exec 604 1827.312293: 1 branches:
ffffffffb856a35c event_sched_in.isra.133+0x9c ([kernel.kallsyms]) =>
ffffffffb8567610 perf_log_itrace_start+0x0 ([kernel.kallsyms])
perf-exec 604 1827.312293: 1 branches:
ffffffffb856a377 event_sched_in.isra.133+0xb7 ([kernel.kallsyms]) =>
ffffffffb8403b40 x86_pmu_add+0x0 ([kernel.kallsyms])
perf-exec 604 1827.312293: 1 branches:
ffffffffb8403b86 x86_pmu_add+0x46 ([kernel.kallsyms]) =>
ffffffffb8403940 collect_events+0x0 ([kernel.kallsyms])
perf-exec 604 1827.312293: 1 branches:
ffffffffb8403a7b collect_events+0x13b ([kernel.kallsyms]) =>
ffffffffb8402cd0 collect_event+0x0 ([kernel.kallsyms])
Fixes:
30def61f64bac5 ("perf parse-events Create two hybrid cache events")
Fixes:
94da591b1c7913 ("perf parse-events Create two hybrid raw events")
Fixes:
9cbfa2f64c04d9 ("perf parse-events Create two hybrid hardware events")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: https //lore.kernel.org/r/
20210909125508.28693-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Thu, 9 Sep 2021 12:55:07 +0000 (15:55 +0300)]
perf tools: Factor out copy_config_terms() and free_config_terms()
Factor out copy_config_terms() and free_config_terms() so that they can
be reused.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: https //lore.kernel.org/r/
20210909125508.28693-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Sat, 11 Sep 2021 12:05:50 +0000 (15:05 +0300)]
perf tools: Fix perf_event_attr__fprintf() missing/dupl. fields
Some fields are missing and text_poke is duplicated. Fix that up.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20210911120550.12203-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Fri, 10 Sep 2021 23:22:49 +0000 (16:22 -0700)]
perf tools: Ignore Documentation dependency file
When building directly on the checked out repository the build process
produces a file that should be ignored, so add it to .gitignore.
Fixes:
a81df63a5df3e195 ("perf doc: Fix doc.dep")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210910232249.739661-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds [Sat, 11 Sep 2021 17:28:14 +0000 (10:28 -0700)]
Merge tag 'io_uring-5.15-2021-09-11' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
- Fix an off-by-one in a BUILD_BUG_ON() check. Not a real issue right
now as we have plenty of flags left, but could become one. (Hao)
- Fix lockdep issue introduced in this merge window (me)
- Fix a few issues with the worker creation (me, Pavel, Qiang)
- Fix regression with wq_has_sleeper() for IOPOLL (Pavel)
- Timeout link error propagation fix (Pavel)
* tag 'io_uring-5.15-2021-09-11' of git://git.kernel.dk/linux-block:
io_uring: fix off-by-one in BUILD_BUG_ON check of __REQ_F_LAST_BIT
io_uring: fail links of cancelled timeouts
io-wq: fix memory leak in create_io_worker()
io-wq: fix silly logic error in io_task_work_match()
io_uring: drop ctx->uring_lock before acquiring sqd->lock
io_uring: fix missing mb() before waitqueue_active
io-wq: fix cancellation on create-worker failure
Linus Torvalds [Sat, 11 Sep 2021 17:19:51 +0000 (10:19 -0700)]
Merge tag 'block-5.15-2021-09-11' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request from Christoph:
- fix nvmet command set reporting for passthrough controllers (Adam Manzanares)
- update a MAINTAINERS email address (Chaitanya Kulkarni)
- set QUEUE_FLAG_NOWAIT for nvme-multipth (me)
- handle errors from add_disk() (Luis Chamberlain)
- update the keep alive interval when kato is modified (Tatsuya Sasaki)
- fix a buffer overrun in nvmet_subsys_attr_serial (Hannes Reinecke)
- do not reset transport on data digest errors in nvme-tcp (Daniel Wagner)
- only call synchronize_srcu when clearing current path (Daniel Wagner)
- revalidate paths during rescan (Hannes Reinecke)
- Split out the fs/block_dev into block/fops.c and block/bdev.c, which
has been long overdue. Do this now before -rc1, to avoid annoying
conflicts due to this (Christoph)
- blk-throtl use-after-free fix (Li)
- Improve plug depth for multi-device plugs, greatly increasing md
resync performance (Song)
- blkdev_show() locking fix (Tetsuo)
- n64cart error check fix (Yang)
* tag 'block-5.15-2021-09-11' of git://git.kernel.dk/linux-block:
n64cart: fix return value check in n64cart_probe()
blk-mq: allow 4x BLK_MAX_REQUEST_COUNT at blk_plug for multiple_queues
block: move fs/block_dev.c to block/bdev.c
block: split out operations on block special files
blk-throttle: fix UAF by deleteing timer in blk_throtl_exit()
block: genhd: don't call blkdev_show() with major_names_lock held
nvme: update MAINTAINERS email address
nvme: add error handling support for add_disk()
nvme: only call synchronize_srcu when clearing current path
nvme: update keep alive interval when kato is modified
nvme-tcp: Do not reset transport on data digest errors
nvmet: fixup buffer overrun in nvmet_subsys_attr_serial()
nvmet: return bool from nvmet_passthru_ctrl and nvmet_is_passthru_req
nvmet: looks at the passthrough controller when initializing CAP
nvme: move nvme_multi_css into nvme.h
nvme-multipath: revalidate paths during rescan
nvme-multipath: set QUEUE_FLAG_NOWAIT
Linus Torvalds [Sat, 11 Sep 2021 17:18:20 +0000 (10:18 -0700)]
Merge tag 'libata-5.15-2021-09-11' of git://git.kernel.dk/linux-block
Pull libata maintainer update from Jens Axboe:
"Damien agreed to take over maintainership of libata, and he would be a
great candidate for it. Update the MAINTAINERS entry to reflect the
change in maintainer and git tree"
* tag 'libata-5.15-2021-09-11' of git://git.kernel.dk/linux-block:
libata: pass over maintainership to Damien Le Moal
Linus Torvalds [Sat, 11 Sep 2021 17:16:30 +0000 (10:16 -0700)]
Merge tag 'trace-v5.15-3' of git://git./linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Minor fixes to the processing of the bootconfig tree"
* tag 'trace-v5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
bootconfig: Rename xbc_node_find_child() to xbc_node_find_subkey()
tracing/boot: Fix to check the histogram control param is a leaf node
tracing/boot: Fix trace_boot_hist_add_array() to check array is value
Linus Torvalds [Sat, 11 Sep 2021 17:12:46 +0000 (10:12 -0700)]
Merge tag 'devicetree-fixes-for-5.15-1' of git://git./linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Disable fw_devlinks on x86 DT platforms to fix OLPC
- More replacing oneOf+const with enum on a few new schemas
- Drop unnecessary type references on Xilinx SPI binding schema
* tag 'devicetree-fixes-for-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
spi: dt-bindings: xilinx: Drop type reference on *-bits properties
dt-bindings: More use 'enum' instead of 'oneOf' plus 'const' entries
of: property: Disable fw_devlink DT support for X86
Linus Torvalds [Sat, 11 Sep 2021 17:05:56 +0000 (10:05 -0700)]
Merge tag 'clk-for-linus' of git://git./linux/kernel/git/clk/linux
Pull clk fix from Stephen Boyd:
"One patch to fix an unused variable warning in a Qualcomm clk driver"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: qcom: gcc-sm6350: Remove unused variable
Linus Torvalds [Sat, 11 Sep 2021 16:54:53 +0000 (09:54 -0700)]
Merge tag 'rtc-5.15' of git://git./linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"The broken down time conversion is similar to what is done in the time
subsystem since v5.14. The rest is fairly straightforward.
Subsystem:
- Switch to Neri and Schneider time conversion algorithm
Drivers:
- rx8025: add rx8035 support
- s5m: modernize driver and set range"
* tag 'rtc-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: rx8010: select REGMAP_I2C
dt-bindings: rtc: add Epson RX-8025 and RX-8035
rtc: rx8025: implement RX-8035 support
rtc: cmos: remove stale REVISIT comments
rtc: tps65910: Correct driver module alias
rtc: move RTC_LIB_KUNIT_TEST to proper location
rtc: lib_test: add MODULE_LICENSE
rtc: Improve performance of rtc_time64_to_tm(). Add tests.
rtc: s5m: set range
rtc: s5m: enable wakeup only when available
rtc: s5m: signal the core when alarm are not available
rtc: s5m: switch to devm_rtc_allocate_device
Linus Torvalds [Sat, 11 Sep 2021 16:47:33 +0000 (09:47 -0700)]
Merge tag 'firewire-update' of git://git./linux/kernel/git/ieee1394/linux1394
Pull firewire updates from Stefan Richter:
- Migrate the bus snooper driver 'nosy' from PCI to DMA API
- Small janitorial cleanup in the IPv4/v6-over-1394 driver
[ The 'nosy' change already come in as a different commit through Greg
KH in the misc tree back in the previous merge window, so only the
cleanup ends up being new to 5.15 - Linus ]
* tag 'firewire-update' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: nosy: switch from 'pci_' to 'dma_' API
firewire: net: remove unused variable 'guid'
Linus Torvalds [Sat, 11 Sep 2021 16:26:00 +0000 (09:26 -0700)]
Merge tag 'pwm/for-5.15-rc1' of git://git./linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"The changes this time around are mostly janitorial in nature. A lot of
this is simplifications of drivers using device-managed functions and
improving compilation coverage.
The Mediatek display PWM driver now supports the atomic API.
Cleanups and minor fixes make up the remainder of this set"
* tag 'pwm/for-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (54 commits)
pwm: mtk-disp: Implement atomic API .get_state()
pwm: mtk-disp: Fix overflow in period and duty calculation
pwm: mtk-disp: Implement atomic API .apply()
pwm: mtk-disp: Adjust the clocks to avoid them mismatch
dt-bindings: pwm: rockchip: Add description for rk3568
pwm: Make pwmchip_remove() return void
pwm: sun4i: Don't check the return code of pwmchip_remove()
pwm: sifive: Don't check the return code of pwmchip_remove()
pwm: samsung: Don't check the return code of pwmchip_remove()
pwm: renesas-tpu: Don't check the return code of pwmchip_remove()
pwm: rcar: Don't check the return code of pwmchip_remove()
pwm: pca9685: Don't check the return code of pwmchip_remove()
pwm: omap-dmtimer: Don't check the return code of pwmchip_remove()
pwm: mtk-disp: Don't check the return code of pwmchip_remove()
pwm: imx-tpm: Don't check the return code of pwmchip_remove()
pwm: img: Don't check the return code of pwmchip_remove()
pwm: cros-ec: Don't check the return code of pwmchip_remove()
pwm: brcmstb: Don't check the return code of pwmchip_remove()
pwm: atmel-tcb: Don't check the return code of pwmchip_remove()
pwm: atmel-hlcdc: Don't check the return code of pwmchip_remove()
...
Linus Torvalds [Sat, 11 Sep 2021 16:20:57 +0000 (09:20 -0700)]
Merge tag 'thermal-v5.15-rc1' of git://git./linux/kernel/git/thermal/linux
Pull thermal updates from Daniel Lezcano:
- Add the tegra3 thermal sensor and fix the compilation testing on
tegra by adding a dependency on ARCH_TEGRA along with COMPILE_TEST
(Dmitry Osipenko)
- Fix the error code for the exynos when devm_get_clk() fails (Dan
Carpenter)
- Add the TCC cooling support for AlderLake platform (Sumeet Pawnikar)
- Add support for hardware trip points for the rcar gen3 thermal driver
and store TSC id as unsigned int (Niklas Söderlund)
- Replace the deprecated CPU-hotplug functions get_online_cpus() and
put_online_cpus (Sebastian Andrzej Siewior)
- Add the thermal tools directory in the MAINTAINERS file (Daniel
Lezcano)
- Fix the Makefile and the cross compilation flags for the userspace
'tmon' tool (Rolf Eike Beer)
- Allow to use the IMOK independently from the GDDV on Int340x (Sumeet
Pawnikar)
- Fix the stub thermal_cooling_device_register() function prototype
which does not match the real function (Arnd Bergmann)
- Make the thermal trip point optional in the DT bindings (Maxime
Ripard)
- Fix a typo in a comment in the core code (Geert Uytterhoeven)
- Reduce the verbosity of the trace in the SoC thermal tegra driver
(Dmitry Osipenko)
- Add the support for the LMh (Limit Management hardware) driver on the
QCom platforms (Thara Gopinath)
- Allow processing of HWP interrupt by adding a weak function in the
Intel driver (Srinivas Pandruvada)
- Prevent an abort of the sensor probe is a channel is not used
(Matthias Kaehlcke)
* tag 'thermal-v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/qcom/spmi-adc-tm5: Don't abort probing if a sensor is not used
thermal/drivers/intel: Allow processing of HWP interrupt
dt-bindings: thermal: Add dt binding for QCOM LMh
thermal/drivers/qcom: Add support for LMh driver
firmware: qcom_scm: Introduce SCM calls to access LMh
thermal/drivers/tegra-soctherm: Silence message about clamped temperature
thermal: Spelling s/scallbacks/callbacks/
dt-bindings: thermal: Make trips node optional
thermal/core: Fix thermal_cooling_device_register() prototype
thermal/drivers/int340x: Use IMOK independently
tools/thermal/tmon: Add cross compiling support
thermal/tools/tmon: Improve the Makefile
MAINTAINERS: Add missing userspace thermal tools to the thermal section
thermal/drivers/intel_powerclamp: Replace deprecated CPU-hotplug functions.
thermal/drivers/rcar_gen3_thermal: Store TSC id as unsigned int
thermal/drivers/rcar_gen3_thermal: Add support for hardware trip points
drivers/thermal/intel: Add TCC cooling support for AlderLake platform
thermal/drivers/exynos: Fix an error code in exynos_tmu_probe()
thermal/drivers/tegra: Correct compile-testing of drivers
thermal/drivers/tegra: Add driver for Tegra30 thermal sensor
Linus Torvalds [Sat, 11 Sep 2021 16:08:28 +0000 (09:08 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- several device tree bindings for input devices have been converted to
yaml
- dropped no longer used ixp4xx-beeper and CSR Prima2 PWRC drivers
- analog joystick has been converted to use ktime API and no longer
warn about low resolution timers
- a few driver fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (24 commits)
Input: analog - always use ktime functions
Input: mms114 - support MMS134S
Input: elan_i2c - reduce the resume time for controller in Whitebox
Input: edt-ft5x06 - added case for EDT EP0110M09
Input: adc-keys - drop bogus __refdata annotation
Input: Fix spelling mistake in Kconfig "useable" -> "usable"
Input: Fix spelling mistake in Kconfig "Modul" -> "Module"
Input: remove dead CSR Prima2 PWRC driver
Input: adp5589-keys - use the right header
Input: adp5588-keys - use the right header
dt-bindings: input: tsc2005: Convert to YAML schema
Input: ep93xx_keypad - prepare clock before using it
dt-bindings: input: sun4i-lradc: Add wakeup-source
dt-bindings: input: Convert Regulator Haptic binding to a schema
dt-bindings: input: Convert Pixcir Touchscreen binding to a schema
dt-bindings: input: Convert ChipOne ICN8318 binding to a schema
Input: pm8941-pwrkey - fix comma vs semicolon issue
dt-bindings: power: reset: qcom-pon: Convert qcom PON binding to yaml
dt-bindings: input: pm8941-pwrkey: Convert pm8941 power key binding to yaml
dt-bindings: power: reset: Change 'additionalProperties' to true
...
Jisheng Zhang [Thu, 26 Aug 2021 14:11:18 +0000 (22:11 +0800)]
riscv: Move EXCEPTION_TABLE to RO_DATA segment
_ex_table section is read-only, so move it to RO_DATA.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Jisheng Zhang [Thu, 26 Aug 2021 14:10:29 +0000 (22:10 +0800)]
riscv: Enable BUILDTIME_TABLE_SORT
Enable BUILDTIME_TABLE_SORT to sort the exception table at build time
rather than during boot.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Geert Uytterhoeven [Thu, 26 Aug 2021 13:19:39 +0000 (15:19 +0200)]
riscv: dts: microchip: mpfs-icicle: Fix serial console
Currently, nothing is output on the serial console, unless
"console=ttyS0,115200n8" or "earlycon" are appended to the kernel
command line. Enable automatic console selection using
chosen/stdout-path by adding a proper alias, and configure the expected
serial rate.
While at it, add aliases for the other three serial ports, which are
provided on the same micro-USB connector as the first one.
Fixes:
0fa6107eca4186ad ("RISC-V: Initial DTS for Microchip ICICLE board")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Masahiro Yamada [Thu, 29 Jul 2021 14:21:47 +0000 (23:21 +0900)]
riscv: move the (z)install rules to arch/riscv/Makefile
Currently, the (z)install targets in arch/riscv/Makefile descend into
arch/riscv/boot/Makefile to invoke the shell script, but there is no
good reason to do so.
arch/riscv/Makefile can run the shell script directly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Kefeng Wang [Thu, 12 Aug 2021 11:47:02 +0000 (19:47 +0800)]
riscv: Improve stack randomisation on RV64
This enlarges the bits availiable for stack randomisation on RV64 from
the default of 8MiB to 1GiB, to match arm64 and x86.
Also, update the documentation to reflect our support for stack
randomisation.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
[Palmer: commit text]
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Heinrich Schuchardt [Thu, 12 Aug 2021 08:10:27 +0000 (10:10 +0200)]
riscv: defconfig: enable NLS_CODEPAGE_437, NLS_ISO8859_1
The EFI system partition uses the FAT file system. Many distributions add
an entry in /etc/fstab for the ESP. We must ensure that mounting does not
fail.
The default code page for FAT is 437 (cf. CONFIG_FAT_DEFAULT_CODEPAGE).
The default IO character set is "iso8859-1" (cf. CONFIG_NLS_ISO8859_1).
So let's enable NLS_CODEPAGE_437 and NLS_ISO8859_1 in defconfig.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Heinrich Schuchardt [Thu, 12 Aug 2021 08:10:26 +0000 (10:10 +0200)]
riscv: defconfig: enable BLK_DEV_NVME
NVMe is a non-volatile storage media attached via PCIe.
As NVMe has much higher throughput than other block devices like
SATA it is a must have for RISC-V. Enable CONFIG_BLK_DEV_NVME.
The HiFive Unmatched is a board providing M.2 slots for NVMe drives.
Enable CONFIG_PCIE_FU740.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Thomas Gleixner [Thu, 9 Sep 2021 12:34:59 +0000 (14:34 +0200)]
Documentation: core-api/cpuhotplug: Rewrite the API section
Dave stumbled over the incomplete and confusing documentation of the CPU
hotplug API.
Rewrite it, add the missing function documentations and correct the
existing ones.
Reported-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210909123212.489059409@linutronix.de
Sebastian Andrzej Siewior [Tue, 3 Aug 2021 14:16:21 +0000 (16:16 +0200)]
cpu/hotplug: Remove deprecated CPU-hotplug functions.
No users in tree use the deprecated CPU-hotplug functions anymore.
Remove them.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210803141621.780504-39-bigeasy@linutronix.de
Sebastian Andrzej Siewior [Tue, 3 Aug 2021 14:16:02 +0000 (16:16 +0200)]
thermal: Replace deprecated CPU-hotplug functions.
The functions get_online_cpus() and put_online_cpus() have been
deprecated during the CPU hotplug rework. They map directly to
cpus_read_lock() and cpus_read_unlock().
Replace deprecated CPU-hotplug functions with the official version.
The behavior remains unchanged.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210803141621.780504-20-bigeasy@linutronix.de
Thomas Gleixner [Fri, 10 Sep 2021 22:38:47 +0000 (00:38 +0200)]
Merge branch 'linus' into smp/urgent
Ensure that all usage sites of get/put_online_cpus() except for the
struggler in drivers/thermal are gone. So the last user and the deprecated
inlines can be removed.
Arnaldo Carvalho de Melo [Fri, 10 Sep 2021 20:26:53 +0000 (17:26 -0300)]
perf bpf: Provide a weak btf__load_from_kernel_by_id() for older libbpf versions
The btf__get_from_id() function was deprecated in favour of
btf__load_from_kernel_by_id(), but it is still avaiable, so use it to
provide a weak function btf__load_from_kernel_by_id() for older libbpf
when building perf with LIBBPF_DYNAMIC=1, i.e. using the system's libbpf
package.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 1 Jul 2021 16:34:38 +0000 (13:34 -0300)]
tools include UAPI: Update linux/mount.h copy
To pick the changes from:
9ffb14ef61bab83f ("move_mount: allow to add a mount into an existing group")
That ends up adding support for the new MOVE_MOUNT_SET_GROUP move_mount
flag.
$ tools/perf/trace/beauty/move_mount_flags.sh > before
$ cp include/uapi/linux/mount.h tools/include/uapi/linux/mount.h
$ tools/perf/trace/beauty/move_mount_flags.sh > after
$ diff -u before after
--- before 2021-09-10 12:28:43.
865279808 -0300
+++ after 2021-09-10 12:28:50.
183429184 -0300
@@ -5,4 +5,5 @@
[ilog2(0x00000010) + 1] = "T_SYMLINKS",
[ilog2(0x00000020) + 1] = "T_AUTOMOUNTS",
[ilog2(0x00000040) + 1] = "T_EMPTY_PATH",
+ [ilog2(0x00000100) + 1] = "SET_GROUP",
};
$
So now one can use it in --filter expressions for tracepoints.
This silences this perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/linux/mount.h' differs from latest version at 'include/uapi/linux/mount.h'
diff -u tools/include/uapi/linux/mount.h include/uapi/linux/mount.h
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 10 Sep 2021 15:24:19 +0000 (12:24 -0300)]
perf beauty: Cover more flags in the move_mount syscall argument beautifier
Previously the regext expected MOVE_MOUNT_[FT]_*, but in the next patch
a flag that doesn't match that expression will be added, MOVE_MOUNT_SET_GROUP
To make this more future proof, take advantage of the fact that the only
one we don't need to cover is MOVE_MOUNT__MASK and use MOVE_MOUNT_[^_]+_*_.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 11 Feb 2021 15:50:52 +0000 (12:50 -0300)]
tools headers UAPI: Sync linux/prctl.h with the kernel sources
To pick the changes in:
433c38f40f6a81cf ("arm64: mte: change ASYNC and SYNC TCF settings into bitfields")
e893bb1bb4d2eb63 ("x86, prctl: Hook L1D flushing in via prctl")
That don't result in any changes in tooling:
$ tools/perf/trace/beauty/prctl_option.sh > before
$ cp include/uapi/linux/prctl.h tools/include/uapi/linux/prctl.h
$ tools/perf/trace/beauty/prctl_option.sh > after
$ diff -u before after
$
Just silences this perf tools build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/prctl.h' differs from latest version at 'include/uapi/linux/prctl.h'
diff -u tools/include/uapi/linux/prctl.h include/uapi/linux/prctl.h
Cc: Balbir Singh <sblbir@amazon.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Wed, 12 Feb 2020 14:04:23 +0000 (11:04 -0300)]
tools include UAPI: Sync sound/asound.h copy with the kernel sources
Picking the changes from:
81be10934949da8b ("ALSA: pcm: Add SNDRV_PCM_INFO_EXPLICIT_SYNC flag")
Which entails no changes in the tooling side as it doesn't introduce new
ioctls.
To silence this perf tools build warning:
Warning: Kernel ABI header at 'tools/include/uapi/sound/asound.h' differs from latest version at 'include/uapi/sound/asound.h'
diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sun, 9 May 2021 12:39:02 +0000 (09:39 -0300)]
tools headers UAPI: Sync linux/kvm.h with the kernel sources
To pick the changes in:
f95937ccf5bd5e0a ("KVM: stats: Support linear and logarithmic histogram statistics")
f0376edb1ddcab19 ("KVM: arm64: Add ioctl to fetch/store tags in a guest")
ea7fc1bb1cd1b92b ("KVM: arm64: Introduce MTE VM feature")
That just rebuilds perf, as these patches don't add any new KVM ioctl to
be harvested for the the 'perf trace' ioctl syscall argument
beautifiers.
This is also by now used by tools/testing/selftests/kvm/, so that will
pick the new KVM_STATS_TYPE_LINEAR_HIST and KVM_STATS_TYPE_LOG_HIST
defines.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Cc: Jing Zhang <jingzhangos@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Steven Price <steven.price@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 10 Sep 2021 14:46:54 +0000 (11:46 -0300)]
tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
To pick the changes in:
61e5f69ef08379cd ("KVM: x86: implement KVM_GUESTDBG_BLOCKIRQ")
That just rebuilds kvm-stat.c on x86, no change in functionality.
This silences these perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h'
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
projects / platform / kernel / linux-starfive.git / log