Lukasz Majewski [Thu, 12 May 2016 11:13:50 +0000 (13:13 +0200)]
TPL: TM2: dwmmc: Use CONFIG_TPL_TM2 flag to avoid unnecessary configuration
Some parts of exynos generic dwmmc code has been disabled by using
CONFIG_TPL_TM2 flag.
It has been done intentionally to avoid board reconfiguration.
The board has already been configured by S-boot bootloader.
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Lukasz Majewski [Thu, 12 May 2016 11:10:11 +0000 (13:10 +0200)]
TPL: TM2: mmc: dwmmc: Provide support for 64 bit idma operation
Some Exynos7 platforms (e.g. Espresso 7420, Samsung TM2 5433) use 64bit
version of dwmmc driver.
This patch allows using both 32 bit and 64 bit versions.
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Lukasz Majewski [Thu, 12 May 2016 11:02:19 +0000 (13:02 +0200)]
TPL: TM2: dwmmc: samsung: Add code to detect if dwmmc driver requires 64bit support
Add to generic dwmmc driver code to check if this IP block require 64bit version
of idma.
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Lukasz Majewski [Thu, 12 May 2016 11:00:28 +0000 (13:00 +0200)]
TPL: TM2: kconfig: defconfig: Adding TM2 tm2_defconfig file
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Lukasz Majewski [Thu, 12 May 2016 10:55:16 +0000 (12:55 +0200)]
TPL: TM2: dts: Support for Samsung TM2 device tree
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Lukasz Majewski [Thu, 12 May 2016 10:52:03 +0000 (12:52 +0200)]
TPL: TM2: clock: exynos: Add clock stubs for TM2 target
Those stubs are protected by CONFIG_TPL_TM2
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Lukasz Majewski [Thu, 12 May 2016 10:50:03 +0000 (12:50 +0200)]
TPL: TM2: timer: Support for PMW timer (PWM4)
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Lukasz Majewski [Thu, 12 May 2016 10:45:42 +0000 (12:45 +0200)]
TPL: TM2: serial: Support for s5p_serial on TM2 board
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Lukasz Majewski [Thu, 12 May 2016 10:40:41 +0000 (12:40 +0200)]
TPL: TM2: Add Samsung TM2 board file
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Lukasz Majewski [Thu, 12 May 2016 10:38:22 +0000 (12:38 +0200)]
TPL: TM2: kconfig: Initial kconfig support for Samsung Exynos5433 TM2 board
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Lukasz Majewski [Fri, 6 May 2016 13:41:19 +0000 (15:41 +0200)]
TPL: TM2: FIX: SYMLINKS: missing symlinks
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Marek Szyprowski [Wed, 2 Mar 2016 10:12:29 +0000 (11:12 +0100)]
TPL: TM2: FIX: cmd: itest: add support for .q size specifier
Workaround to add support for proper long/quad (32/64bits) memory access.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Marek Szyprowski [Thu, 14 Apr 2016 13:02:36 +0000 (15:02 +0200)]
gadget: f_thor: properly enable 3rd endpoint defined by this protocol
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Lukasz Majewski [Tue, 10 May 2016 09:10:37 +0000 (11:10 +0200)]
usb: dwc3: Change addr and length declaration to long at dwc3_flush_cache() function
In the dwc3 driver, calls of dwc3_flush_cache() pass addr and length as
longs. Unfortunately, this function converts long on 64 bit machines
to 32 bit int.
This causes "Synchronous Abort" exceptions on 64 bit machines.
To alleviate this problem we accept long arguments to dwc3_flush_cache()
and then explicitly covert them to unsigned types required by
flush_dcache_range().
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Jaehoon Chung [Tue, 26 Apr 2016 09:58:56 +0000 (18:58 +0900)]
configs: odroid_xu3: disable the configuration for fixing MFC
Disable the EXYNOS5422_MFC_CPLL_FIX configuration.
(Before disabled this, some board should be stuck.)
In future, it needs to find the main problem and solution.
Change-Id: If679cc49732caf6d6d6f3b4fe8f3e13938d6fd2e
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Thu, 21 Apr 2016 10:38:38 +0000 (19:38 +0900)]
packaging: change the Version information to 2016.03
Change the Version information to 2016.03.
(Rebased on v2016.03.)
Change-Id: Ifc4c9af40c0df714b6307f00acc5c8f77412acee
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Thu, 21 Apr 2016 09:53:34 +0000 (18:53 +0900)]
packaging: u-boot: change from u-boot.bin to u-boot-nodtb.bin for multi-dtb
Changed inptut file for multi-dtb.
(Use u-boot-nodtb.bin instead of u-boot.bin)
commit
ad1ecd20 "fdt: Build a u-Boot binary without device tree"
Since applied it, u-boot.bin is included dt file by default.
(If OF_CONTROL is enabled..)
Change-Id: Id93d81ec6327e571da684a630f254c244bfecaf2
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Przemyslaw Marczak [Fri, 4 Dec 2015 15:21:02 +0000 (16:21 +0100)]
odroid xu3/xu4: add bootclone and ubootupgrade environment scripts
Script ubootupgrade:
This script allows updating U-Boot from file u-boot-mmc.bin
existing on boot partition, e.g. with SD card reader.
This is useful for XU4, when U-Boot upgrade is needed,
then it can be delivered with 'boot.img' as regular file
and upgraded by running:
run ubootupgrade
Script bootclone:
This script allows cloning bootloader firmware including:
- bl1, bl2, U-Boot ,and TZSW
from bootable SD card to clean eMMC card using XU3/XU4 board.
This is useful, when user have SD card reader only and wants prepare
a bootable eMMC card.
The script expects that SD is bootable and can be run as follows:
run bootclone
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Fri, 4 Dec 2015 13:21:00 +0000 (14:21 +0100)]
exynos4-dt: update regulators opmode settings
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Fri, 7 Aug 2015 10:01:07 +0000 (12:01 +0200)]
pmic: max77686: adjust operation mode names to match documentation
The MAX77686 PMIC's operation modes defined in the header were
quite misleading, because in the defined STANDBY mode, the output
were off, instead of staying in low power mode.
This commit correct this issue, and now the operation modes
are consistent with the PMIC's documentation.
Rename results:
- MAX77686_LDO_MODE_STANDBY -> MAX77686_LDO_MODE_ON_AUTO_OFF
- MAX77686_LDO_MODE_STANDBY_LPM -> MAX77686_LDO_MODE_ON_AUTO_LPM
- MAX77686_BUCK_MODE_STANDBY -> MAX77686_BUCK_MODE_ON_AUTO_OFF
For both modes, the output state is controlled by PMIC's PWRREQ
external signal used by SoC. In normal operation mode, when PWRREQ
signal is HIGH, the output is ON, amd for LOW signal, the output
is OFF or LPM (Low Power Mode).
As a result, this commit updates the Trats2 regulator settings.
Change-Id: Ibcb86e0c1ed50530930fbabab88bc374eedc4161
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Wed, 2 Dec 2015 12:42:12 +0000 (13:42 +0100)]
TMP: odroid-xu3::add checkboard to use the same DTB for XU3/XU3L
This U-Boot detects Odroid board's version (XU3/XU3L)
to load proper fdtfile based on this info.
But until tizen boot image doesn't include the FDT for XU3Lite,
the same file must be used for XU3 and XU3L.
This commit adds environment script 'checkboard', to set fdtfile name.
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Wed, 2 Dec 2015 10:48:56 +0000 (11:48 +0100)]
bootstage: enable bootstage timing report to fdt
This commit enables boot stage time reporting for U-Boot
and appends it to device-tree, which can be seen in Linux.
The report is created as 'bootstage' fdt node with child
for each stage, like:
- main_loop (U-Boot prompt)
- start_kernel
fdt:
bootstage {
44 {
name = "start_kernel";
mark = <>;
};
...
};
This can be checked in linux with 'cat /proc/device-tree/bootstage/id/name'.
Note: The id's are not constant for each boot stage name. For safety
use in linux, it's better to find the proper one by it's name.
This feature is enabled for configs:
- odroid-xu3
- odroid-u3
- tizen
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Thu, 19 Nov 2015 14:45:27 +0000 (15:45 +0100)]
Odroid-xu3: set default bootcmd to autoboot
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Tue, 10 Nov 2015 11:29:18 +0000 (12:29 +0100)]
f_thor: allow to download 4GB images
This commit fixes 2GB file size limit for thor downloader.
The application on host side sends the downloaded file size as 32-bit
unsigned value. But the thor implementation on U-Boot side interpreted
this as signed value. This caused an error for files with size greater
than 2GB.
This commit fixes the data types in code, which allows to send file
of size 4GB.
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Marek Szyprowski [Thu, 17 Sep 2015 10:53:16 +0000 (12:53 +0200)]
OdroidXU3: add workaround for MFC crash issue
Most versions of MFC v8 firmware suffer from various hang and crash
issues. Most of those issues has been fixed in updated MFC v8 firmware
available for Exynos 5433, however using it on Odroid XU3 sometimes
causes random crashes. In our experiments it turned out that such
firmware works stable after increasing the MFC sclk rate from default
333MHz to 480MHz. This has been achieved by setting ACLK333 clock
divider to 1 (from 2) and setting CPLL rate to 480MHz (from 666MHz).
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: Id38d914fddea7fa8fe7144e25cc47948184f9579
Inha Song [Wed, 5 Aug 2015 05:05:03 +0000 (14:05 +0900)]
tools:mkimage_multidtb: Align less than PAD size
This patch fix align error in mkimage_multidtb tools.
if DTB size is aigned to $PAD, $PAD_CNT should be zero not $PAD.
Change-Id: I2bf8343dae9b2bb71a70abf1df61bd215c2996f8
Signed-off-by: Inha Song <ideal.song@samsung.com>
Inha Song [Wed, 24 Jun 2015 01:56:00 +0000 (10:56 +0900)]
Odroid-XU3: Add missing default mmcbootdev environment
This patch add missing default "mmcbootdev" environment in Odroid-XU3
board configs.
Change-Id: If10c9650d1efef6246287d13690ec84ed1be4438
Signed-off-by: Inha Song <ideal.song@samsung.com>
Jaehoon Chung [Tue, 26 May 2015 09:50:54 +0000 (18:50 +0900)]
packaging: u-boot-xu3.spec: modify the source file prefix name
Modify the source file prefix name from u-boot-xu3 to u-boot.
When built with u-boot.spec and u-boot-xu3.spec, it needs to take same source
file.
Change-Id: I0f0d8fd5973b4e9cfc6337d9b9431598bedaa891
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Inha Song [Tue, 26 May 2015 10:34:28 +0000 (19:34 +0900)]
packaging: fix %setup top directory name to match repo name
This pach fix %setup top directory name to match repo name.
Change-Id: I12ad129f9092bf111f6deb900d1b5cdb9cf4ccdb
Signed-off-by: Inha Song <ideal.song@samsung.com>
Inha Song [Tue, 26 May 2015 05:26:03 +0000 (14:26 +0900)]
packaging: fix minifest and temp directory name for odroid xu3
This pach fix mainifest name to u_boot_xu3 from u_boot and also
fix temporary name for gbs to u-boot-xu3.
Change-Id: I307186ea75e1cb4ce4a588694aa081d318051158
Signed-off-by: Inha Song <ideal.song@samsung.com>
Maciej Wereski [Thu, 19 Mar 2015 10:39:59 +0000 (11:39 +0100)]
Add dtc to u-boot-tools
Without dtc mkimage fails.
Change-Id: If66e67881a616dddcda88004ffe073795e010433
Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
Inha Song [Thu, 21 May 2015 02:04:46 +0000 (11:04 +0900)]
Odroid-XU3: Change root partition name to rootfs
This patch root partition name to rootfs from platform.
The root partition name is changed to rootfs from platform since Tizen 3.0.
Change-Id: I111fd510e097b9354a7d5214b551ceb809069e24
Signed-off-by: Inha Song <ideal.song@samsung.com>
Inha Song [Tue, 17 Mar 2015 07:36:57 +0000 (16:36 +0900)]
packaging: Add change spec for odroid-xu3 u-boot build
This patch Add spec file for odroid-xu3 u-boot build by GBS.
Signed-off-by: Inha Song <ideal.song@samsung.com>
Inha Song [Thu, 26 Feb 2015 01:08:21 +0000 (10:08 +0900)]
tool: mkimage_signed: Add odroid-xu3_defconfig support
This patch add odroid-xu3_defconfig for Odroid XU3 board.
Signed-off-by: Inha Song <ideal.song@samsung.com>
Przemyslaw Marczak [Tue, 17 Mar 2015 09:44:57 +0000 (10:44 +0100)]
exynos: common: increase malloc len to 128MiB
This change is required for thor command.
When malloc pool is increased, then thor doesn't
fail when allocates the data buffer few times.
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Tue, 27 Jan 2015 15:12:53 +0000 (16:12 +0100)]
exynos4: dtsi: add include of gpio bindings
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Joonyoung Shim [Fri, 16 Jan 2015 07:59:04 +0000 (16:59 +0900)]
Odroid-XU3: adjust to support Tizen requirements
This patch includes changes required to boot Tizen,
by varoius authors:
arm: exynos5420: Adding support for board_usb_{init|cleanup}() functions
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
samsung: common: board: call dwc3_uboot_exit() for boards with DWC3
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
config: Odroid-XU3: Support DFU download
Signed-off-by: Inha Song <ideal.song@samsung.com>
smdk5420: Add dfu_alt_info settings interface for support DFU download
Signed-off-by: Inha Song <ideal.song@samsung.com>
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
config: Odroid-XU3: Enable dwc3 usb gadget
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
config: Odroid-XU3: Add default dfu device environment
Signed-off-by: Inha Song <ideal.song@samsung.com>
usb: config: odroid XU3: Enable UMS (Mass Storage) gadget
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Odroid-XU3: Enable check board signature when download bootloader
Signed-off-by: Inha Song <ideal.song@samsung.com>
odroid-xu3: config: add platform autoboot command
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Odroid-XU3: Set rootfs device number to 0
Signed-off-by: Inha Song <ideal.song@samsung.com>
Przemyslaw Marczak [Fri, 28 Nov 2014 13:34:59 +0000 (14:34 +0100)]
samsung: board: dram_init: return error if no mem
Change-Id: Ic1bcce5bc90a38b751f32bef23cae79e24d5a443
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Thu, 31 Jul 2014 14:31:55 +0000 (16:31 +0200)]
packaging: u-boot.spec: add tizen_defconfig support
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Przemyslaw Marczak [Thu, 31 Jul 2014 14:26:45 +0000 (16:26 +0200)]
tool:mkimage_signed: add tizen_defconfig support
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Thu, 31 Jul 2014 14:28:17 +0000 (16:28 +0200)]
tools:mkimage_multidtb: cat multi-plat bin with multiple dtbs
This script concatenates proper dtb files into
one multi.dtb with 4B padding after the u-boot-multi.bin.
Output: u-boot-mmc.bin:
| u-boot-multi.bin | dtb 1 (4B padding) | dtb 2 (4b padding) | dtb x ...
Change-Id: I9b308fc58707917b89c3f59e65b414d02f5e8efb
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Tue, 8 Jul 2014 11:48:16 +0000 (13:48 +0200)]
tizen: add tizen_defconfig
Changes for v2015.10-rc5
- tizen.h: remove CONFIG_SYS_PROMPT
- tizen_defconfig: enable missing configs
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Inha Song <ideal.song@samsung.com>
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Tue, 8 Jul 2014 11:51:14 +0000 (13:51 +0200)]
tizen: add Exynos4 common file
Changes for v2015.10-rc5:
- exynos4-dt.c: add missing control of MAX77693 regulators
for Trats2 in function s5pc210_phy_control()
Changed for v2016.03:
- Replaced from s3c_udc to dwc2_udc
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inha Song <ideal.song@samsung.com>
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Przemyslaw Marczak [Thu, 12 Jun 2014 08:20:59 +0000 (10:20 +0200)]
thor:cmd: get the default command arguments from environment
This change adds support to getting the default DFU cmd line
arguments from the environment.
DFU and THOR uses the same command line arguments,
so the DFU command environment setup can be used also with THOR.
Change-Id: I2e0984c909147c13191f6d6646d094c9f02c392a
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Thu, 7 Aug 2014 11:03:25 +0000 (13:03 +0200)]
dfu:cmd: get the default command arguments from environment
This change adds support to store the default DFU cmd line
arguments in the environment.
This is useful for users who usually use the same arguments
for dfu command and do the upgrade frequently.
DFU command use cases:
- dfu <usb ctrl> <if> <dev> [<list>] - use command line args
- dfu [<list>] - take the default command line args from env
And for both - optional list the initialized DFU entities.
To use the default dfu device configuration user should define:
- $dfu_usb_con - e.g. "0"
- $dfu_interface - e.g. "mmc"
- $dfu_device - e.g. "0"
Change-Id: I1c87677c0384a5f5a808ab9b7845d6da6f9ec980
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Thu, 13 Nov 2014 10:40:02 +0000 (11:40 +0100)]
samsung: misc_init_r: insert call to platform_setup()
This change adds call of platform_setup() to check or set active
platform configuration.
Another change is setup environment variable: ${platname},
from board name in set_board_info().
Change-Id: I355736bf40f8fa3697ce0b4546f7702d2e54a0f9
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Wed, 5 Nov 2014 20:09:07 +0000 (21:09 +0100)]
samsung: misc: add new feature for configure partitions layout at boot.
This feature requires some platform configuration data
in the environment, which is:
-${platname}_setup_N_name - name of this setup
-${platname}_setup_N_partitions - GPT partitions or NULL if MBR
-${platname}_setup_N_alt_system - dfu_alt_info with system entities
-${platname}_setup_N_bootpart - boot partition number for this setup
-${platname}_setup_N_rootpart - root partition number for this setup
And for at least one setup it requires:
-${platname}_setup_cnt - number of ${platname} configs
-${platname}_setup_chosen - chosen plaform config
-${platname}_setup_active - active platform config (autoset)
Two environment variables are used to switch/check active setup:
-${platname}_setup_chosen - can be changed manually
-${platname}_setup_active - should be the same as chosen
If chosen setup is not set, then will be automatically set on boot
by setting proper env:
- $partitions := ${platname}_setup_N_partitions
- $dfu_alt_system_${platname} := ${platname}_setup_N_alt_system
- $mmcbootpart := ${platname}_setup_N_bootpart
- $mmcrootpart := ${platname}_setup_N_rootpart
- ${platname}_setup_active := ${platname}_setup_chosen
If ${partitions} are:
- set, then gpt write is called
- unset, e.g. when using MBR - then partition table is unchanged
Config:
- CONFIG_PLATFORM_SETUP
Changed for v2016.03:
- Replaced from vsnprintf to vsprintf
Change-Id: Ib9f90415b92ec1d67a9bf6b84e7ab5d5deea8a7d
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Inha Song [Thu, 6 Nov 2014 02:37:36 +0000 (11:37 +0900)]
tizen: add new gpt version and add gpt version headers
This patch adds new gpt version and moves gpt data into
separated headers.
In order to be able to gpt version switch, make gpt_vxx.h
files that has the partition information.
- include/samsung/gpt_v08.h
- include/samsung/gpt_v13.h
Change-Id: I33870a54703a07468f17b0f0d7cf43e563409e65
Signed-off-by: Inha Song <ideal.song@samsung.com>
tizen: config: enable platform command and platform setup
This patch enables "platform" command and adds multiple
platform setups to tizen environment.
At this stage - there are available three setups:
- trats2 pit v8
- trats2 pit v13 - chosen
- odroidu3 Tizen v2.x - chosen
- odroidu3 Tizen v3.0 - chosen
The chosen setup - is the default for each platform,
and is set as an active after first boot.
This should be changed manually if another setup is required.
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
samsung: gpt: fix CSA partition name
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Przemyslaw Marczak [Fri, 15 May 2015 14:26:15 +0000 (16:26 +0200)]
samsung: define autoboot command in external header
Change-Id: Ifb3f73392246b0585b486ffd9fd4ef43870d6d01
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Thu, 18 Sep 2014 11:02:19 +0000 (13:02 +0200)]
samsung:board: don't call set_board_type() for CONFIG_OF_MULTI
For this config the set_board_type() is called much more earlier
- in the function setup_fdt(), so the second call in the board file
is unneeded.
Change-Id: I71037c593d00f7bde95a0880787e64d0d09ff173
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Thu, 18 Sep 2014 13:27:59 +0000 (15:27 +0200)]
thor: check board type before display for CONFIG_OF_MULTI.
For multi platform binary, it is required to check
the board type because not every board supports display.
Change-Id: Ia4153d58f48846a0bec6e9dc90ea17d87d5da096
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Tue, 29 Jul 2014 12:32:03 +0000 (14:32 +0200)]
samsung:board: run lcd menu only on trats2 for CONFIG_OF_MULTI
Change-Id: I02baeb60125f695e30c138b7311910731f5d9f40
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Wed, 30 Jul 2014 12:17:54 +0000 (14:17 +0200)]
samsung:misc: add call to get_board_name() for CONFIG_OF_MULTI
Change-Id: I236f5d23122f02ef759d7e79354a9af788627968
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Thu, 18 Sep 2014 14:20:29 +0000 (16:20 +0200)]
samsung:board: dram_init(): alloc memory to store fdt dram info
For CONFIG_OF_MULTI the dram_init() function gets memory information
from the device tree blob by the call to fdtdec_decode_memory().
The same is done second time in dram_init_banksize() - this was the
simplest because board info structure is not initialized at dram_init()
stage.
This change uses malloc and gd->priv pointer to store the memory banks
parameters and next uses it in dram_init_banksize().
Thanks to this change, the boot time decreases, because, the function
fdtdec_decode_memory() is called only once.
Change-Id: I8f357c6a641d4440f32d2fe24d7e1e2dc5bc4a3d
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Thu, 18 Sep 2014 14:15:13 +0000 (16:15 +0200)]
u-boot:global data: add new field 'void *priv' for CONFIG_OF_MULTI
This field is required for storing detected platform info
before the relocation or "bd_t" initialization.
Change-Id: Idbe987252079e5bf863adbec4fd5fc5edc2d8829
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Mon, 28 Jul 2014 15:43:23 +0000 (17:43 +0200)]
samsung:board: init dram info based on memory node in fdt
Change-Id: I3677f0ab0b4aed264de8af37e87b081f66a36b97
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Mon, 28 Jul 2014 09:16:47 +0000 (11:16 +0200)]
fdtdec: add function: fdtdec_decode_memory()
This function can be used for decode memory node from device tree file.
Currently supports decoding of a single memory node with a multiple ranges
specified by the reg property with size of address and size cells specified
in a root node.
Function parameters:
- blob: ptr to device tree
- start: ptr to banks start address array
- size: ptr to banks size array
- max_banks: max number of banks to fill
Two of args: start or size can be NULL e.g. if only each bank size is needed.
Sample use case:
memory {
device_type = "memory";
reg = <0x40000000 ... 0x10000000 ...
0x50000000 ... 0x10000000 ...
... ... ... ...>;
};
Change-Id: I2f3defb89cf62d81377fb7882dbbae79b4472af2
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Mon, 28 Jul 2014 09:00:34 +0000 (11:00 +0200)]
fdt_support: remove type static in fdt_read_prop()
Change-Id: Iaff9eff27dba6fc6f13d031a96f310361648acfd
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Wed, 23 Jul 2014 09:41:41 +0000 (11:41 +0200)]
arch:arm:dts: odroid/trats2: add memory device type
Change-Id: I80c42c8c390ccba1e748671b7f85d5b71371bbe9
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Tue, 8 Jul 2014 10:47:25 +0000 (12:47 +0200)]
common:board_f:setup_fdt: set fdt addr by get_board_fdt() for CONFIG_OF_MULTI
Change-Id: I47039ce703c6bd8be18dc932ca67936f1ca5946b
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Mon, 7 Apr 2014 15:21:13 +0000 (17:21 +0200)]
samsung: misc: menu: new option: battery charge level
This change adds new option to lcd menu which allows
check battery state. In case if battery level is greater
than boot level threshold (20%), battery screen is not
displayed. So this menu option is useful in such situations.
Change-Id: I13e7e57516766fea787855b914d2884343cc33a5
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Tue, 25 Mar 2014 11:32:22 +0000 (12:32 +0100)]
trats2: enable command battery of interactive charger
This change adds two features on trats2 device:
- show battery charge level by displaying battery screen
- manually start interactive charger if needed
Usage:
command: "battery"
options: "state" or "charge"
Change-Id: Ie000edfc2fb6f2938ddf1e17611fdc5045169830
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Mon, 24 Mar 2014 09:40:12 +0000 (10:40 +0100)]
trats2: add support to interactive charger
This commit adds support to interactive charger api which means an
implementation of listed functions:
- charger_enable() - enable the charger.Charger can be enabled
automatically if the device power on state
is triggered by USB cable connection.
- charger_type() - this function returns device type connected
to usb port of device. For charger api matters
only positive value.
- battery_present() - check if battery is connected (DETBAT pin)
- battery_state() - check battery charge level. Returns percent value.
- low_power_mode() - switch SOC into low power mode which covers:
- disable cores: 1, 2, 3,
- disable SOC unused power domains,
- decrease CPU clock to 200 MHz
After low_power_mode() function call, device should be restarted,
which is implemented in interactive charger.
Change-Id: I7e664fab29c45c2d29dc57a2faa887d88530d8f3
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Tue, 25 Mar 2014 11:27:05 +0000 (12:27 +0100)]
samsung: misc: new command: battery and config CONFIG_CMD_BATTERY
This feature allows to enable interactive charger by command line
or use interactive charger for display battery charge level.
Usage:
- battery [<state>] [<charge>]
Option "state" will display battery screen for 2 seconds.
Option "charge" will start interactive charger mode.
Interactive charger mode can be stopped by:
- pressing CTRL+C keys combination,
or device reset by:
- pressing PWR key for 5 seconds (only if SOC > 20% - one grey bar),
- pressing PWR key for 10 seconds, which is PMIC reset.
Change-Id: I622830198f6cba4f0fa30798b02aa003c55332bb
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Fri, 21 Mar 2014 15:15:50 +0000 (16:15 +0100)]
samsung: misc: new feature: common interactive charger
This change adds common interactive charger feature with
display support.
New config: CONFIG_INTERACTIVE_CHARGER
New functions:
- battery() - which takes one of commands parameter:
BOOT_CHECK: check battery present, low power mode;
check battery charge level, draw battery screen
STATE: display battery screen with current state of charge
this is for command line use
CHARGE: start interactive charger for every battery charge level
this is also for command line use
- interactive_charger() - loop function for charge the battery and do:
- update of battery screen,
- update charge animation,
- check for exit condition (if charge level >= 20%)
- clear screen after 10 seconds animation
- draw battery on clean screen if any key pressed
There are few constants defined for this feature:
- CHARGE_TRESHOLD_BOOT: 20 (20 percent of charge)
- CHARGE_DISPLAY_TIMEOUT_SEC: 10 (time for animation display)
- CONNECT_CHARGER_TIMEOUT_SEC: 5 (time for connect charger animation)
- CHARGE_PWR_KEY_RESET_TIMEOUT: 3 (time for PWR key press to reset device)
Battery charge level cases:
- 0-20 % - don't allow to boot and then:
- enable charger if connected and start charge animation
or if no charger:
- display 5 sec charger animation and turn off the device
- > 20 % - don't display battery screen and boot device
Charge mode can be break by keys VOLUP + VOLDOWN. If charge level > 20%
then device can be enabled by pressing PWR key for a time defined in
CHARGE_PWR_KEY_RESET_TIMEOUT.
Change-Id: I15066a4b86c89f1f0124b072a0aeb7246b29b279
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Mon, 24 Mar 2014 14:26:10 +0000 (15:26 +0100)]
lib: tizen: add battery interactive charger screens
New images:
- battery frame: 200x380px, 16bpp,
batery level area in frame: 170x300px
- battery bar: 160x50px, 16bpp, grey and red,
(for 5 bars in battery frame with 8px interelement gap)
- charge screen; charge screen clean images: 128x120px, 16bpp
- charge screen indicator; vertical and horizontal
indicator clean images: 8x8px, 16bpp
Library functions:
For battery screen:
- draw_battery_screen() - draw empty battery frame
- draw_battery_state() - fill battery frame with charge bars
to a given percent
For charge animation:
- draw_charge_screen() - draw a small phone connected to a cable
(under the battery)
- clean_charge_screen() - cleans above screen
- draw_charge_animation() - display an animation with
a point running on a cable
(on a charge screen)
For low battery state and no charger connected:
- draw_connect_charger_animation() - draw and clean charge
screen respectively
Library is ready to use gzipped images
but this commit adds only bmp images.
Changes for v2015.10-rc5:
- correct usage of removed typedef 'bmp_image_t'
Change-Id: I25a527b07b809b9105b6d4d8c29aa01e47224134
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Fri, 21 Mar 2014 10:48:54 +0000 (11:48 +0100)]
trats2: add implementation of board_poweroff() and CONFIG_CMD_POWEROFF
This change adds implementation of function board_poweroff() which
turns off the device off by setting PSHOLD gpio to low state which
is a power off signal for main PMIC.
Change-Id: Iae97fb81d7e7e243079ac18d03f4fd917c50b62e
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Wed, 23 Apr 2014 12:57:19 +0000 (14:57 +0200)]
arch:arch:exynos: add exynos ps hold control output setting
Change-Id: I4ee074278c55198030aa5092f36e61e3c6efc487
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Wed, 26 Mar 2014 15:00:54 +0000 (16:00 +0100)]
arch:arm:exynos: power.h define exynos4x12 power subsystem structure
Change-Id: Icf6cb80529f3fb5511e440f572e0870359e6e37c
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Mon, 9 Jun 2014 06:25:09 +0000 (08:25 +0200)]
common: add command power off - to switch off the device by command
This change introduces new config:
- CONFIG_CMD_POWEROFF - which enables cmd/poweroff.c
This requires implementation of function board_poweroff() which
is yet declared in include/common.h
Implementation of board_poweroff() should:
1.a. turn off the device
or
1.b. print info to user about turn off ability
2. never back to caller
Usage is simple: "power off"
Changed for v2016.03:
- Relocated from common directory to cmd directory
- Renamed from cmd_poweroff to poweroff
Change-Id: Ia5fe73250e2ac29d0868b80bcd867bae2aa8d5be
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Chanho Park [Fri, 10 Jan 2014 01:48:52 +0000 (10:48 +0900)]
packaging: Adding .spec file for u-boot project
Change-Id: I5dd90f728a9f0f951afda5634f2509cbb3eccc95
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Jacek Pielaszkiewicz <j.pielaszkie@samsung.com>
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
Lukasz Majewski [Tue, 25 Mar 2014 16:33:34 +0000 (17:33 +0100)]
tools: dtc: Add source to build the dtc compiler
Newest u-boot (v2014.04) requires device tree compiler (DTC) version
at least 1.4.
Change-Id: Ie62778e3391cbf3b586221839cf53362c5f8cdff
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Inha Song [Fri, 21 Feb 2014 17:55:15 +0000 (18:55 +0100)]
trats/trats2: enable bootloader signature
Enable of this config will now require making binary signature.
From now, manually build sequence should looks like this:
CROSS_COMPILE=...
make mrproper
make trats2_config
make
./tools/mkimage_signed.sh u-boot-dtb.bin trats2_config
The output signed binary is: u-boot-mmc.bin
Change-Id: I9a2c86d2f24a050ff3738adb9dbd7d5914ff16d8
Signed-off-by: Inha Song <ideal.song@samsung.com>
Inha Song [Mon, 28 Oct 2013 06:52:53 +0000 (15:52 +0900)]
gadged: thor: add board signature check when download 'u-boot-mmc.bin'
This patch adds checking the special signature of downloaded U-Boot binary.
The new function check_board_signature() is called before do dfu_write()
in thor gadged code.
The board signature is checked for:
- the running U-Boot
- downloaded 'u-boot-mmc.bin'
at offset of binary start defined by:
- (CONFIG_SIGN_IMAGE_SIZE - HDR_SIZE)
The download can succeed when signatures are equal.
The default U-Boot image size defined by CONFIG_SIGN_IMAGE_SIZE is 1MB.
Other changes:
- print info about running/downloading U-Boot signature
- print info about wrong image signature/size
- don't allow downloading unsigned or signed wrong U-Boot image
- allow download any image if no signature found at running U-Boot
The first version added by:
Signed-off-by: Inha Song <ideal.song@samsung.com>
Upgrade:
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Thu, 10 Apr 2014 13:03:40 +0000 (15:03 +0200)]
tools: add script: mkimage_signed.sh for sign u-boot binary
This script appends given binary image by signature header.
Script takes two arguments:
- @arg1: binary name
- @arg2: config name
Script usage:
./mkimage_signed.sh binary.img config_name
e.g.:
./mkimage_signed.sh u-boot-dtb.bin trats2_config
Sign header is stored on last 512 bytes of input binary.
Maximum imput binary size is 1MB - 512 Bytes = 1048064 Bytes.
The maximum size is limited by first bootloader (s-boot).
Now it is configured to load exactly 2048 blocks (1MB).
Current u-boot-dtb.bin size for trats2 is less than 600 KBytes,
so the size limit should not be an issue.
Change-Id: Ia7472be693df8d4135312971d963d27f2ea20f0f
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Wed, 2 Apr 2014 14:13:59 +0000 (16:13 +0200)]
lib: tizen: thor screen update
Now cable connection message is displayed on thor screen.
When cable is connected then only unneeded lcd console lines are overwritten.
Main changes:
- add new function: draw_thor_connected()
- update function draw_thor_screen()
- usb: gadget: thor:
- move call to draw_thor_screen(),
- add call to draw_thor_connected()
other change:
- remove draw_thor_init_screen() function
Changes for v2015.04-rc1:
- Replace <lcd.h> to <lcd_console.h>
Changes for v2015.10-rc5
- correct usage of removed typedef 'bmp_image_t'
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Inha Song [Fri, 11 Oct 2013 08:50:24 +0000 (17:50 +0900)]
usb: thor: add screen support
cmd_thordown.c:
- add libtizen header
- change error handling for thor init
- add call to draw_thor_fail_screen() on error
f_thor.c:
- thor_init(): return -EINTR on ctrl+c or if power key was pressed 3 times
- thor_rx_data(): return -EINTR when pressed ctrl+c on data receiving
- add display simple info screen before cable is not connected
- add display download screen when connection is established
- update download progress bar if data receiving
Change-Id: Ia89ef48c6c2faa5eda5dda5c5b3951e675eec03b
Signed-off-by: Inha Song <ideal.song@samsung.com>
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Mon, 10 Feb 2014 15:28:30 +0000 (16:28 +0100)]
samsung: misc: check_keys(), key_pressed() - remove type static.
This patch removes type "static" from those functions declaration.
Change-Id: I2244ca3568b73251401e5102f26cc113ea69c1a4
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Przemyslaw Marczak [Fri, 7 Feb 2014 14:03:41 +0000 (15:03 +0100)]
libtizen: add download logo and download progress bar
Added features:
- add screen with exit info if no cable is connected
- download logo with progress bar after after THOR init
- downlaod failure screen on error
- PIT version, U-boot version on download screen
- function for update progess bar when downloading is going on
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: Inha Song <ideal.song@samsung.com>
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Lukasz Majewski [Mon, 16 Feb 2015 16:40:25 +0000 (17:40 +0100)]
common: lcd: extend lcd api by function lcd_get_position_cursor()
Changes for v2015.04-rc1:
- Moving lcd console related code to lcd_console.c
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Przemyslaw Marczak [Wed, 26 Feb 2014 08:17:45 +0000 (09:17 +0100)]
Trats: Setup: CLK_GATE_BLOCK - enable all clocks
This change allows boot kernel 3.10 on trats
Change-Id: Ic7f1672d9300a32fed9fa6d8f6fc30f118326a83
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Hyungwon Hwang [Fri, 15 Nov 2013 07:10:42 +0000 (16:10 +0900)]
video:lcd:s6e8ax0: increase screen gamma.
Change gamma table to increase the brightness of s6e8ax0 panel.
Change-Id: I6b21022fb90bbb14160c0426a776d73c9590345b
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Tom Rini [Mon, 13 Mar 2017 17:54:16 +0000 (13:54 -0400)]
Prepare v2017.03
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Mon, 13 Mar 2017 17:50:17 +0000 (13:50 -0400)]
scripts/config_whitelist.txt: Regenerate
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Mon, 13 Mar 2017 17:48:42 +0000 (13:48 -0400)]
configs: Re-sync
Signed-off-by: Tom Rini <trini@konsulko.com>
Matthijs van Duin [Tue, 7 Mar 2017 02:42:24 +0000 (03:42 +0100)]
arm: omap-common: Fix typo in CONFIG_OMAP54XX guard
Some initialization was unintentionally being skipped on omap5.
Fixes:
f5af0827f276 ("arm: omap-common: Guard some parts of the code with CONFIG_OMAP44XX/OMAP54XX")
Signed-off-by: Matthijs van Duin <matthijsvanduin@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Jörg Krause [Mon, 6 Mar 2017 20:07:11 +0000 (21:07 +0100)]
tools: binman: change shebang from python into python2
This tool does not work with Python 3. Change the shebang to make sure the
script is run by a Python 2 interpreter.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Ladislav Michl [Mon, 6 Mar 2017 12:54:30 +0000 (13:54 +0100)]
arm: OMAP2+: nandecc: propagate error to command return status
Currently nandecc returns zero even if underlaying
omap_nand_switch_ecc function fails. Fix that by
propagating error returned to command return value.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tom Rini [Fri, 10 Mar 2017 00:52:57 +0000 (19:52 -0500)]
Merge branch 'pmic' of git://git.denx.de/u-boot-mmc
Tom Rini [Tue, 7 Mar 2017 12:13:42 +0000 (07:13 -0500)]
ARM: Migrate errata to Kconfig
This moves all of the current ARM errata from various header files and in to
Kconfig. This allows for a minor amount of cleanup as we had some instances
where both a general common header file was enabling errata as well as the
board config. We now just select these once at the higher level in Kconfig
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Fri, 3 Mar 2017 20:33:33 +0000 (15:33 -0500)]
omap4: Migrate to using imply
Move the default y options under arch/arm/mach-omap2/omap4/Kconfig to be
using imply instead in arch/arm/Kconfig
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Fri, 3 Mar 2017 20:33:32 +0000 (15:33 -0500)]
omap3: Migrate to using imply
Move the default y options under arch/arm/mach-omap2/omap3/Kconfig to be
using imply instead in arch/arm/Kconfig
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Fri, 3 Mar 2017 20:33:31 +0000 (15:33 -0500)]
TI: Migrate board/ti/common/Kconfig to imply
The option that we had set in board/ti/common/Kconfig as default y are
best done with imply under the appropriate main Kconfig option instead.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Fri, 3 Mar 2017 20:33:30 +0000 (15:33 -0500)]
am335x_evm: Switch to using imply keyword
These particular SPL options are part of what the ROM provides, but for
compatibility with how we have previously used them, move them to being
implied by the board being selected.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Fri, 3 Mar 2017 20:33:29 +0000 (15:33 -0500)]
kconfiglib.py: Kludge in 'imply' support
Currently upstream does not yet understand the imply keyword. For what
we use kconfiglib.py for today, this is OK. We only need to be able to
evaluate in order to make boards.cfg and none of those choices will
depend on how imply evaluates out.
Signed-off-by: Tom Rini <trini@konsulko.com>
Ryan Harkin [Thu, 2 Mar 2017 17:45:16 +0000 (17:45 +0000)]
do_smhload: fix return code
do_smhload was using a ulong to store the return value from
smh_load_file. That returns an int, where -1 indicates an error. As a
ulong will never be negative, smh_load_file errors were not detected and
so_smhload always returned zero.
Also, when errors were spotted, do_smhload was returning 1, rather than
the enumeration CMD_RET_FAILURE (which is also 1).
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tom Rini [Wed, 1 Mar 2017 21:51:58 +0000 (16:51 -0500)]
Freescale/NXP: Migrate CONFIG_FSL_CAAM to defconfigs
In some cases this is absolutely required, so select this for some secure
features. This also requires migration of RSA_FREESCALE_EXP
Cc: Ruchika Gupta <ruchika.gupta@nxp.com>
Cc: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Cc: Naveen Burmi <NaveenBurmi@freescale.com>
Cc: Po Liu <po.liu@freescale.com>
Cc: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Cc: Priyanka Jain <Priyanka.Jain@freescale.com>
Cc: Sumit Garg <sumit.garg@nxp.com>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Cc: Chunhe Lan <Chunhe.Lan@freescale.com>
Cc: Feng Li <feng.li_2@nxp.com>
Cc: Alison Wang <alison.wang@freescale.com>
Cc: Mingkai Hu <Mingkai.Hu@freescale.com>
Cc: York Sun <york.sun@nxp.com>
Cc: Saksham Jain <saksham.jain@nxp.freescale.com>
Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Patrick Delaunay [Tue, 28 Feb 2017 18:29:11 +0000 (19:29 +0100)]
tools: Remove CONFIG_SYS_TEXT_BASE in Makefile
This define is not used in tools sources and can be removed
to avoid unnecessary link between tools and defconfig
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Masahiro Yamada [Mon, 27 Feb 2017 06:24:45 +0000 (15:24 +0900)]
kbuild: turn of dtc unit address warnings by default
DTC 1.4.2 or later checks DT unit-address without reg property and
vice-versa, and generates lots of warnings. Fixing DT files will
take for a while. Until then, let's turn off the check unless
building with W=*.
Introduce a new helper dtc-option to check if the option is supported
in order to suppress warnings on older versions.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Rask Ingemann Lambertsen [Wed, 18 Jan 2017 20:53:40 +0000 (21:53 +0100)]
sunxi: power: axp809.c: Fix aldo1-2 being disabled for mvolt != 0
The execution flow is currently like this for aldo_num == 1 or 2:
int axp_set_aldo(int aldo_num, unsigned int mvolt)
{
...
if (mvolt == 0)
return pmic_bus_clrbits(AXP809_OUTPUT_CTRL1,
AXP809_OUTPUT_CTRL1_ALDO1_EN << (aldo_num - 1));
...
return pmic_bus_clrbits(AXP809_OUTPUT_CTRL1,
AXP809_OUTPUT_CTRL1_ALDO1_EN << (aldo_num - 1));
}
I.e. aldo1 and aldo2 will always be disabled. This patch fixes it by
setting (rather than clearing) the enable bit when mvolt != 0.
Signed-off-by: Rask Ingemann Lambertsen <rask@formelder.dk>
Fixes:
795857df413a ("sunxi: power: add AXP809 support")