Yao Qi [Fri, 18 Mar 2016 14:39:09 +0000 (14:39 +0000)]
[spu] throw error when target_read_memory fails
I happen to see that 1 is returned in spu_software_single_step when
target_read_memory returns 1. It must be wrong. That patch changes
it to throwing an error. Note that I choose to throw error because I
find the code in the end of spu_software_single_step throws errors.
gdb:
2016-03-18 Yao Qi <yao.qi@linaro.org>
* spu-tdep.c (spu_software_single_step): Throw error when
target_read_memory fails.
Yao Qi [Fri, 18 Mar 2016 14:34:37 +0000 (14:34 +0000)]
Check lwp_signal_can_be_delivered for enqueue/dequeue pending signals
The enqueue and dequeue signals in linux_resume_one_lwp_throw use one
condition and its inverted one. This patch is to move the condition
into a function lwp_signal_can_be_delivered, so that the next patch can
change the condition in one place.
gdb/gdbserver:
2016-03-18 Yao Qi <yao.qi@linaro.org>
* linux-low.c (lwp_signal_can_be_delivered): New function.
(linux_resume_one_lwp_throw): Use lwp_signal_can_be_delivered.
Yao Qi [Fri, 18 Mar 2016 14:31:40 +0000 (14:31 +0000)]
Set signal to 0 after enqueue_pending_signal
Today, we enqueue signal in linux_resume_one_lwp_throw, but set
variable 'signal' many lines below with the comment
/* Postpone any pending signal. It was enqueued above. */
signal = 0;
I feel difficult to associate code across many lines, and we should
move the code close to enqueue_pending_signal call. This is what
this patch does in general. After this change, variable 'signal'
is set to zero very early, so the 'signal' value in the following
debugging message makes no sense, so I remove it from the debugging
message. The function returns early if lwp->status_pending_p is
true, so 'signal' value in the debugging message doesn't matter,
AFAICS. Also, I move one debugging message several lines below to
make it close the real ptrace call,
if (debug_threads)
debug_printf ("Resuming lwp %ld (%s, signal %d, stop %s)\n",
lwpid_of (thread), step ? "step" : "continue", signal,
lwp->stop_expected ? "expected" : "not expected");
so that the debugging message can reflect what GDBserver does. This
is a code refactor and only debugging messages are affected.
gdb/gdbserver:
2016-03-18 Yao Qi <yao.qi@linaro.org>
* linux-low.c (linux_resume_one_lwp_throw): Set 'signal' to
0 if signal is enqueued. Remove 'signal' from one debugging
message. Move one debugging message to some lines below.
Remove code setting 'signal' to 0.
Yao Qi [Fri, 18 Mar 2016 14:28:14 +0000 (14:28 +0000)]
Remove redundant WIFSTOPPED check
WIFSTOPPED is checked linux_wstatus_maybe_breakpoint, so WIFSTOPPED
in "WIFSTOPPED (wstat) && linux_wstatus_maybe_breakpoint (wstat)"
is redundant. This patch removes WIFSTOPPED check.
gdb/gdbserver:
2016-03-18 Yao Qi <yao.qi@linaro.org>
* linux-low.c (linux_low_filter_event): Remove redundant
WIFSTOPPED check together with linux_wstatus_maybe_breakpoint.
Nick Clifton [Fri, 18 Mar 2016 13:09:03 +0000 (13:09 +0000)]
Remove spurious empty line in changelog entry.
Nick Clifton [Fri, 18 Mar 2016 13:07:33 +0000 (13:07 +0000)]
Fix generation of as.1 manual page so that it can be converted to DocBook format.
gas * doc/as.texinfo: Place the target specific command line options
into their own man page section.
etc * texi2pod.pl: Add TARGET to the list of recognised man page
sections.
Awson [Fri, 18 Mar 2016 11:45:43 +0000 (11:45 +0000)]
Ensure that the .rdata_pseudo_runtime_reloc sections are not discarded by gabage collection.
PR 19531
* scripttempl/pe.sc (.rdata_runtime_pseudo_reloc): Always KEEP
this section.
* scripttempl/pep.sc (.rdata_runtime_pseudo_reloc): Likewise.
Senthil Kumar Selvaraj [Fri, 18 Mar 2016 09:51:47 +0000 (09:51 +0000)]
Fix possible failure in the AVR linker tests.
* ld-avr/gc-section-debugline.d: Relax regex check for CU.
Nick Clifton [Fri, 18 Mar 2016 09:32:32 +0000 (09:32 +0000)]
Add simulation of MUL and NEG instructions to AArch64 simulator.
* cpustate.c: Remove spurious spaces from TRACE strings.
Print hex equivalents of floats and doubles.
Check element number against array size when accessing vector
registers.
* memory.c: Trace memory reads when --trace-memory is enabled.
Remove float and double load and store functions.
* memory.h (aarch64_get_mem_float): Delete prototype.
(aarch64_get_mem_double): Likewise.
(aarch64_set_mem_float): Likewise.
(aarch64_set_mem_double): Likewise.
* simulator (IS_SET): Always return either 0 or 1.
(IS_CLEAR): Likewise.
(fldrs_pcrel): Load and store floats using 32-bit memory accesses
and doubles using 64-bit memory accesses.
(fldrd_pcrel, fldrs_wb, fldrs_abs, fldrs_scale_ext): Likewise.
(fldrd_wb, fldrd_abs, fsturs, fsturd, fldurs, fldurd): Likewise.
(fstrs_abs, fstrs_wb, fstrs_scale_ext, fstrd_abs): Likewise.
(fstrd_wb, fstrd_scale_ext, store_pair_float): Likewise.
(store_pair_double, load_pair_float, load_pair_double): Likewise.
(do_vec_MUL_by_element): New function.
(do_vec_op2): Call do_vec_MUL_by_element.
(do_scalar_NEG): New function.
(do_double_add): Call do_scalar_NEG.
GDB Administrator [Fri, 18 Mar 2016 00:00:09 +0000 (00:00 +0000)]
Automatic date update in version.in
Cary Coutant [Thu, 17 Mar 2016 22:37:10 +0000 (15:37 -0700)]
Add mips and s390 build targets for gold.
* configure.ac: Add mips and s390 to the gold target check.
* configure: Regenerate.
Vladimir Radosavljevic [Thu, 17 Mar 2016 22:07:49 +0000 (15:07 -0700)]
Add MIPS-64 support.
gold/
* mips.cc (enum Special_relocation_symbol): New enum type.
(is_readonly_section): New function.
(eh_reloc): Likewise.
(Mips_got_entry::is_section_symbol_): New member.
(Mips_got_entry::is_section_symbol): New method.
(Mips_got_info::record_local_got_symbol): Add is_section_symbol
argument.
(Mips_relobj::mips_elf_options_section_name): New method.
(Mips_output_data_got::record_local_got_symbol): Add
is_section_symbol argument, and pass it to
Mips_got_info::record_local_got_symbol.
(Mips_output_data_got::got_offset): Add addend argument, and pass
it to Relobj::local_got_offset.
(struct Mips_output_reloc_writer): New type.
(class Mips_output_data_reloc): New class.
(Mips_output_data_plt::Reloc_section): Change type to
Mips_output_data_reloc.
(Target_mips::Reloc_section): Likewise.
(Mips_reloc_types::get_r_addend): Remove unsigned from return type.
(Mips_classify_reloc::get_r_type2): New method.
(Mips_classify_reloc::get_r_type3): Likewise.
(Mips_classify_reloc::get_r_ssym): Likewise.
(Target_mips::Reloca_section): Remove.
(Relocate::should_apply_static_reloc): Rename from
should_apply_r_mips_32_reloc.
(Target_mips::copy_reloc): Replace Reltype parameter with r_type
and r_offset.
(Mips_relocate_functions::Valtype): New type.
(Mips_relocate_functions::Valtype64): New type.
(Mips_relocate_functions::check_overflow): New method.
(Mips_relocate_functions::mips_reloc_unshuffle): Move to public
interface.
(Mips_relocate_functions::mips_reloc_shuffle): Likewise.
(Mips_relocate_functions::rel16): Add support for resolving
relocations for Mips64.
(Mips_relocate_functions::rel32): Likewise.
(Mips_relocate_functions::reljalr): Likewise.
(Mips_relocate_functions::relpc32): Likewise.
(Mips_relocate_functions::rel26): Likewise.
(Mips_relocate_functions::relpc16): Likewise.
(Mips_relocate_functions::relmicromips_pc7_s1): Likewise.
(Mips_relocate_functions::relmicromips_pc10_s1): Likewise.
(Mips_relocate_functions::relmicromips_pc16_s1): Likewise.
(Mips_relocate_functions::do_relhi16): Likewise.
(Mips_relocate_functions::do_relgot16_local): Likewise.
(Mips_relocate_functions::rello16): Likewise.
(Mips_relocate_functions::relgot): Likewise.
(Mips_relocate_functions::relgotpage): Likewise.
(Mips_relocate_functions::relgotofst): Likewise.
(Mips_relocate_functions::relgot_hi16): Likewise.
(Mips_relocate_functions::relgot_lo16): Likewise.
(Mips_relocate_functions::relgprel): Likewise.
(Mips_relocate_functions::relgprel32): Likewise.
(Mips_relocate_functions::tlsrelhi16): Likewise.
(Mips_relocate_functions::tlsrello16): Likewise.
(Mips_relocate_functions::tlsrel32): Likewise.
(Mips_relocate_functions::relsub): Likewise.
(Mips_relocate_functions::releh): New method.
(Mips_relocate_functions::rel64): Likewise.
(Mips_got_info::record_local_got_symbol): Add is_section_symbol and
pass it to Mips_got_entry.
(Mips_got_info::add_local_entries): Pass addend argument
to code functions, and for STT_SECTION symbols call
add_symbolless_local_addend.
(Mips_got_info::add_tls_entries): Pass addend argument to code
functions.
(Mips_relobj::do_read_symbols): Read gp value that was used to
create object.
(Mips_output_data_plt::plt_entry): Remove opcode from l[wd]
instruction. Opcode for instruction will be selected later.
(Target_mips::gc_process_relocs): Add case for SHT_RELA.
(Target_mips::scan_relocatable_relocs): Likewise.
(Target_mips::emit_relocs_scan): Likewise.
(Target_mips::relocate_relocs): Likewise.
(Target_mips::do_finalize_sections): Skip objects for merging
processor specific flags in which all input sections will be
discarded.
(mips_get_size_for_reloc): Add case for R_MIPS_EH.
(Target_mips::Scan::get_reference_flags): Likewise.
(Target_mips::relocate_special_relocatable): Call rel26 method with
calculate_only and calculated_value arguments.
(Target_mips::Scan::local): Add case for R_MIPS_EH. Don't create a
dynamic relocation against a readonly sections, and pass
is_section_symbol to Mips_got_info::record_local_got_symbol.
(Target_mips::Scan::global): Add case for R_MIPS_EH. Don't create a
dynamic relocation against a readonly sections, and pass r_type
and r_offset to Target_mips::copy_reloc.
(Target_mips::Relocate::relocate): Add support for resolving
relocations for Mips64.
(Target_mips::mips_info): Add case for Mips64 default dynamic
linker name.
(Target_selector_mips): Correct emulation names.
Vladimir Radosavljevic [Thu, 17 Mar 2016 21:27:48 +0000 (14:27 -0700)]
Add missing Mips_output_data_la25_stub::do_print_to_mapfile.
gold/
* mips.cc (class Mips_output_data_la25_stub): Add
do_print_to_mapfile function.
Vladimir Radosavljevic [Thu, 17 Mar 2016 20:28:34 +0000 (13:28 -0700)]
Fix problem with --emit-relocs for Mips-32.
gold/
* mips.cc (Mips_classify_reloc::put_r_info): Call 32bit version of
elf_r_info.
Jan Kratochvil [Thu, 17 Mar 2016 17:17:30 +0000 (18:17 +0100)]
Suggest running gdbserver for a PID in container
currently
gdb -p <pid from a container>
will print:
warning: Target and debugger are in different PID namespaces; thread lists and other data are likely unreliable
It correctly states the problem but it does not say how to solve it.
Originally I wanted to suggest also the Docker "-p 1234:1234" parameter but
I see the containers are more general topic than just Docker (even LxC etc.).
According to Gary future GDBs should be able to work even without gdbserver.
But currently gdbserver is still required.
gdb/ChangeLog
2016-03-17 Jan Kratochvil <jan.kratochvil@redhat.com>
* linux-thread-db.c (check_pid_namespace_match): Extend the message.
Pedro Alves [Thu, 17 Mar 2016 10:21:37 +0000 (10:21 +0000)]
PR remote/19496, timeout in forking-threads-plus-bkpt
This patch addresses a failure in
gdb.threads/forking-threads-plus-breakpoint.exp:
FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=1:
detach_on_fork=on: inferior 1 exited (timeout)
Cause:
A fork event was reported to GDB before GDB knew about the parent
thread, followed immediately by a breakpoint event in a different
thread. The parent thread was subsequently added via
remote_notice_new_inferior in process_stop_reply, but when the thread
was added the thread_info.state was set to THREAD_STOPPED. The fork
event was then handled correctly, but when the fork parent was resumed
via a call to keep_going, the state was unchanged.
The breakpoint event was then handled, which caused all the
non-breakpoint threads to be stopped. When the breakpoint thread was
resumed, all the non-breakpoint threads were resumed via
infrun.c:restart_threads. Our old fork parent wasn't restarted,
because it still had thread_info.state set to THREAD_STOPPED.
Ultimately the program under debug hung waiting for a pthread_join
while the old fork parent was stopped forever by GDB.
Fix:
Since this is non-stop, then the bug is that the thread should have
been added in THREAD_RUNNING state. Consider that infrun may be
pulling target events out of the target_ops backend into its own event
queue, but, not process them immediately. E.g., infrun may be
stopping all threads temporarily for a step-over-breakpoint operation
for thread A (stop_all_threads). The waitstatus of all threads is
thus left pending in the thread structure (save_status), including the
fork event of thread B. Right at this point, if the user does "info
threads", that should show thread B (the fork parent) running, not
stopped, even if internally, gdb is holding it paused for a little
bit.
Thus if in non-stop mode, always add new threads in the external
user-visible THREAD_RUNNING state. Change remote_notice_new_inferior
to accept the internal executing state of the thread instead, with
EXECUTING set to 1 when we discover a thread that is running on the
target (such as through remote_update_thread_list), and 0 when the
thread is really paused (such as when we see a stop reply).
Tested on x86_64 Linux and Nios II Linux target with x86 Linux host.
gdb/ChangeLog:
2016-03-17 Pedro Alves <palves@redhat.com>
Don Breazeal <donb@codesourcery.com>
PR remote/19496
* infcmd.c (notice_new_inferior): Use the 'leave_running' argument
instead of checking the 'non_stop' global.
* remote.c (remote_add_thread): New parameter 'executing'. Use it
to set the new thread's executing state.
(remote_notice_new_inferior): Rename parameter 'running' to
'executing'. Always set the thread state to THREAD_RUNNING in
non-stop mode, and to THREAD_STOPPED in all-stop mode. Pass
EXECUTING to remote_add_thread and notice_new_inferior.
(remote_update_thread_list): Update to pass executing state, not
running state.
Andreas Arnez [Thu, 17 Mar 2016 09:55:55 +0000 (10:55 +0100)]
S390: Add syscall info for syscalls up to 374
Represent new Linux syscalls for s390 and s390x in GDB's syscall info.
Add the syscalls from 355 (userfaultfd) up to 374 (mlock2) as well as
the previously reserved NUMA syscalls 268-270, 287, and 310.
gdb/ChangeLog:
* syscalls/s390-linux.xml: Add NUMA syscalls and new syscalls up
to 374.
* syscalls/s390x-linux.xml: Likewise.
Andreas Arnez [Thu, 17 Mar 2016 09:55:55 +0000 (10:55 +0100)]
S390: Fix output path for s390-multiarch test case
Since test artifacts are organized in a directory hierarchy, the
s390-multiarch test case is not executed correctly any more. This is
because it uses an obsolete way of constructing the output paths.
This fix invokes standard_testfile instead.
gdb/testsuite/ChangeLog:
* gdb.arch/s390-multiarch.exp: Use standard_testfile instead of
maintaining separate logic for constructing the output path.
Andreas Arnez [Thu, 17 Mar 2016 08:58:57 +0000 (09:58 +0100)]
linux-record: Simplify with record_mem_at_reg()
The function record_linux_system_call() often records a memory area
whose address is contained in a register. So far this required two
function calls: one for fetching the register value, and another one for
recording the memory area. These two function calls are now merged into
a new local helper function, and all occurrences are adjusted. This
reduces the source code and makes it more readable.
gdb/ChangeLog:
* linux-record.c (record_mem_at_reg): New helper function.
(record_linux_system_call): Exploit new helper function where
applicable.
Andreas Arnez [Thu, 17 Mar 2016 08:58:57 +0000 (09:58 +0100)]
linux-record.c: Fix whitespace issues
This patch changes whitespace only, fixing whitespace issues in
linux-record.c.
gdb/ChangeLog:
* linux-record.c: Fix whitespace issues; tabify, remove trailing
spaces.
Andreas Arnez [Thu, 17 Mar 2016 08:58:56 +0000 (09:58 +0100)]
linux-record: Fix bad fall-through for pipe/pipe2
This patch added handling for some syscalls to linux-record.c:
https://sourceware.org/ml/gdb-patches/2015-10/msg00452.html
But for both `pipe' and `pipe2' the patch lacks a statement after an
`if', such that the following `break' is interpreted as the `if'-body
instead.
This adds the missing (return-) statements for the conditionals.
gdb/ChangeLog:
* linux-record.c (record_linux_system_call): Add missing return
statements to handling of pipe and pipe2 syscalls.
GDB Administrator [Thu, 17 Mar 2016 00:00:22 +0000 (00:00 +0000)]
Automatic date update in version.in
Alan Modra [Wed, 16 Mar 2016 23:27:50 +0000 (09:57 +1030)]
testsuite/ChangeLog is no longer supposed to exist
move entries to main ChangeLog
Don Breazeal [Wed, 16 Mar 2016 22:13:44 +0000 (15:13 -0700)]
PR remote/19496, interrupted syscall in forking-threads-plus-bkpt
This patch addresses "fork:Interrupted system call" (or wait:) failures
in gdb.threads/forking-threads-plus-breakpoint.exp.
The test program spawns ten threads, each of which do ten fork/waitpid
sequences. The cause of the problem was that when one of the fork
children exited before the corresponding fork parent could initiate its
waitpid for that child, a SIGCHLD and/or SIGSTOP was delivered and
interrupted a fork or waitpid in another thread.
The fix was to wrap the system calls in a loop to retry the call if
it was interrupted, like:
do
{
pid = fork ();
}
while (pid == -1 && errno == EINTR);
Since this is a Linux-only test I figure it is OK to use errno and EINTR.
I tried a number of alternative fixes using SIG_IGN, SA_RESTART,
pthread_sigblock, and bsd_signal, but none of these worked as well.
Tested on Nios II Linux target with x86 Linux host.
gdb/testsuite/ChangeLog:
2016-03-16 Don Breazeal <donb@codesourcery.com>
* gdb.threads/forking-threads-plus-breakpoint.c (thread_forks):
Retry fork and waitpid on interrupted system call errors.
* gdb.threads/forking-threads-plus-breakpoint.exp: (do_test):
Use with_timeout_factor to increase timeout to 90.
Doug Evans [Wed, 16 Mar 2016 17:30:41 +0000 (10:30 -0700)]
xml-tdesc.c (tdesc_start_enum): Fix c++ build.
gdb/ChangeLog:
* xml-tdesc.c (tdesc_start_enum): Fix c++ build.
Jiong Wang [Wed, 16 Mar 2016 16:11:59 +0000 (16:11 +0000)]
[ARM] Support ARMv8.2 FP16 simd instructions
gas/
* config/tc-arm.c (N_S_32): New.
(N_F_16_32): Likewise.
(N_SUF_32): Support N_F16.
(N_IF_32): Likewise.
(neon_dyadic_misc): Likewise.
(do_neon_cmp): Likewise.
(do_neon_cmp_inv): Likewise.
(do_neon_mul): Likewise.
(do_neon_fcmp_absolute): Likewise.
(do_neon_step): Likewise.
(do_neon_abs_neg): Likewise.
(CVT_FLAVOR_VAR): Likewise.
(do_neon_cvt_1): Likewise.
(do_neon_recip_est): Likewise.
(do_vmaxnm): Likewise.
(do_vrint_1): Likewise.
(neon_check_type): Check architecture support for FP16 extension.
(insns): Update comments.
* testsuite/gas/arm/armv8-2-fp16-simd.s: New test source.
* testsuite/gas/arm/armv8-2-fp16-simd.d: New testcase for arm mode.
* testsuite/gas/arm/armv8-2-fp16-simd-thumb.d: Likewise for thumb mode.
* testsuite/gas/arm/armv8-2-fp16-simd-warning.d: New rejection test for
arm mode.
* testsuite/gas/arm/armv8-2-fp16-simd-warning-thumb.d: Likewise for
thumb mode.
* testsuite/gas/arm/armv8-2-fp16-simd-warning.l: New expected rejection
error file.
opcode/
* arm-dis.c (neon_opcodes): Support new FP16 instructions.
Yao Qi [Wed, 16 Mar 2016 14:55:56 +0000 (14:55 +0000)]
Process record: Fix arm-linux syscall arguments
Arguments are passed in r0-r6 on arm linux syscall (both EABI and OABI).
This patch is to set arm_linux_record_tdep.arg{1-7} to the right
register number.
This patch fixes the following test failures...
-FAIL: gdb.reverse/getresuid-reverse.exp: check ruid record
-FAIL: gdb.reverse/getresuid-reverse.exp: check rgid record
-FAIL: gdb.reverse/pipe-reverse.exp: check pipe record
-FAIL: gdb.reverse/readv-reverse.exp: check readv record
-FAIL: gdb.reverse/readv-reverse.exp: check readv record
-FAIL: gdb.reverse/readv-reverse.exp: check readv record
-FAIL: gdb.reverse/readv-reverse.exp: check readv record
-FAIL: gdb.reverse/waitpid-reverse.exp: check waitpid record
gdb:
2016-03-16 Yao Qi <yao.qi@linaro.org>
* arm-linux-tdep.c (arm_linux_init_abi): Fix
arm_linux_record_tdep.arg1, arm_linux_record_tdep.arg2 and
arm_linux_record_tdep.arg3. Set arm_linux_record_tdep.arg4,
arm_linux_record_tdep.arg5, arm_linux_record_tdep.arg6, and
arm_linux_record_tdep.arg7.
Nick Clifton [Wed, 16 Mar 2016 11:33:55 +0000 (11:33 +0000)]
Fix checking bignum values that are being inserted into byte sized containers.
* read.c (emit_expr_with_reloc): Add code check a bignum with
nbytes == 1.
* config/rx/rx-parse.y (rx_intop): Accept bignum values for sizes
other than 32-bits.
* testsuite/gas/elf/bignum.s: New test source file.
* testsuite/gas/elf/bignum.d: New test driver file.
* testsuite/gas/elf/elf.exp: Run the new test.
GDB Administrator [Wed, 16 Mar 2016 00:00:19 +0000 (00:00 +0000)]
Automatic date update in version.in
Don Breazeal [Tue, 15 Mar 2016 22:18:28 +0000 (15:18 -0700)]
PR 18303, Tolerate malformed input for lookup_symbol-called functions
lookup_symbol is often called with user input. Consequently, any
function called from lookup_symbol{,_in_language} should attempt to
deal with malformed input gracefully. After all, malformed user
input is not a programming/API error.
This patch does not attempt to find/correct all instances of this. It
only fixes locations in the code that trigger test suite failures.
This patch fixes PR breakpoints/18303, "Assertion: -breakpoint-insert
with windows paths of file in non-current directory".
The patch includes three new tests related to this. One is just
gdb.linespec/ls-errs.exp copied and converted to use C++ instead of C, and
to add a case using a file name containing a Windows-style logical drive
specifier. The others include an MI test to provide a regression test for
the specific case reported in PR 18303, and a C++ test for proper error
handling of access to a program variable when using a file scope specifier
that refers to a non-existent file.
Tested on x86_64 native Linux.
gdb/ChangeLog
2016-01-28 Keith Seitz <keiths@redhat.com>
PR breakpoints/18303
* cp-namespace.c (cp_lookup_bare_symbol): Change assertion to
look for "::" instead of simply ":".
(cp_search_static_and_baseclasses): Return null_block_symbol for
malformed input.
Remove assertions.
* cp-support.c (cp_find_first_component_aux): Do not return
a prefix length for ':' unless the next character is also ':'.
gdb/testsuite/ChangeLog
2016-01-28 Don Breazeal <donb@codesourcery.com>
* gdb.cp/scope-err.cc: New test program.
* gdb.cp/scope-err.exp: New test script.
* gdb.linespec/ls-errs.c (myfunction): Expanded to have multiple
lines and "set breakpoint here" comment.
* gdb.linespec/ls-errs.exp: Added C++ testing and new test case.
Fixed some whitespace and format issues.
* gdb.mi/mi-linespec-err-cp.cc: New test program.
* gdb.mi/mi-linespec-err-cp.exp: New test script.
Doug Evans [Tue, 15 Mar 2016 22:02:13 +0000 (15:02 -0700)]
Add cole945@ to earlier entry. Fix typo in same entry.
Doug Evans [Tue, 15 Mar 2016 21:43:49 +0000 (14:43 -0700)]
Add cpsr_flags to aarch64 core regs.
gdb/ChangeLog:
* features/aarch64-core.xml (cpsr_flags): New flags type.
(cpsr): Use it.
* features/aarch64.c: Regenerate.
Doug Evans [Tue, 15 Mar 2016 21:41:52 +0000 (14:41 -0700)]
Remove "end" spec.
gdb/ChangeLog:
* features/i386/32bit-core.xml (i386_eflags): Remove "end" spec.
* features/i386/32bit-sse.xml (i386_eflags): Ditto.
* features/i386/64bit-core.xml (i386_eflags): Ditto.
* features/i386/64bit-sse.xml (i386_eflags): Ditto.
* features/i386/x32-core.xml (i386_eflags): Ditto.
Doug Evans [Tue, 15 Mar 2016 21:37:29 +0000 (14:37 -0700)]
Extend flags to support multibit and enum bitfields.
gdb/ChangeLog:
Extend flags to support multibit and enum bitfields.
NEWS: Document new features.
* c-typeprint.c (c_type_print_varspec_prefix): Handle TYPE_CODE_FLAGS.
(c_type_print_varspec_suffix, c_type_print_base): Ditto.
* gdbtypes.c (arch_flags_type): Don't assume all fields are one bit.
(append_flags_type_field): New function.
(append_flags_type_flag): Call it.
* gdbtypes.h (append_flags_type_field): Declare.
* target-descriptions.c (struct tdesc_type_flag): Delete.
(enum tdesc_type_kind) <TDESC_TYPE_BOOL>: New enum value.
(enum tdesc_type_kind) <TDESC_TYPE_ENUM>: Ditto.
(struct tdesc_type) <u.f>: Delete.
(tdesc_predefined_types): Add "bool".
(tdesc_predefined_type): New function.
(tdesc_gdb_type): Handle TDESC_TYPE_BOOL, TDESC_TYPE_ENUM.
Update TDESC_TYPE_FLAGS support.
(tdesc_free_type): Handle TDESC_TYPE_ENUM. Update TDESC_TYPE_FLAGS.
(tdesc_create_flags): Update.
(tdesc_create_enum): New function.
(tdesc_add_field): Initialize start,end to -1.
(tdesc_add_typed_bitfield): New function.
(tdesc_add_bitfield): Call it.
(tdesc_add_flag): Allow TDESC_TYPE_STRUCT. Update.
(tdesc_add_enum_value): New function.
(maint_print_c_tdesc_cmd): Fold TDESC_TYPE_FLAGS support into
TDESC_TYPE_STRUCT. Handle TDESC_TYPE_ENUM.
* target-descriptions.h (tdesc_create_enum): Declare.
(tdesc_add_typed_bitfield, tdesc_add_enum_value): Declare.
* valprint.c (generic_val_print_enum_1): New function.
(generic_val_print_enum): Call it.
(val_print_type_code_flags): Make static. Handle multibit bitfields
and enum bitfields.
* valprint.h (val_print_type_code_flags): Delete.
* xml-tdesc.c (struct tdesc_parsing_data) <current_type_is_flags>:
Delete. All uses removed.
(tdesc_start_enum): New function.
(tdesc_start_field): Handle multibit and enum bitfields.
(tdesc_start_enum_value): New function.
(enum_value_attributes, enum_children, enum_attributes): New static
globals.
(feature_children): Add "enum".
* features/gdb-target.dtd (enum, evalue): New elements.
gdb/doc/ChangeLog:
* gdb.texinfo (Target Descriptions): New menu item "Enum Target Types".
(Target Description Format): Mention enum types. Update docs on
flags types.
(Predefined Target Types): Add "bool".
(Enum Target Types): New node.
gdb/testsuite/ChangeLog:
* gdb.xml/extra-regs.xml: Add enum, mixed_flags values.
* gdb.xml/tdesc-regs.exp (load_description): New arg xml_file.
All callers updated. Add tests for enums, mixed flags register.
Doug Evans [Tue, 15 Mar 2016 19:57:06 +0000 (12:57 -0700)]
Use int instead of LONGEST in tdesc_type sizes.
gdb/ChangeLog:
* target-descriptions.c (struct tdesc_type) <u.u.size>: Change type
from LONGEST to int.
(struct tdesc_type) <u.f.size>: Ditto.
(tdesc_set_struct_size): Change type of "size" arg from LONGEST
to int. Add assertion size > 0.
(tdesc_create_flags): Ditto.
* target-descriptions.h (tdesc_set_struct_size): Update.
(tdesc_create_flags): Update.
* xml-tdesc.c (MAX_FIELD_SIZE, MAX_FIELD_BITSIZE): New macros.
(MAX_VECTOR_SIZE): New macro.
(tdesc_start_struct): Catch conversion errors from LONGEST to int.
(tdesc_start_flags, tdesc_start_field, tdesc_start_vector): Ditto.
Doug Evans [Tue, 15 Mar 2016 19:53:55 +0000 (12:53 -0700)]
maint_print_c_tdesc_cmd: Use type for TYPE_CODE_FLAGS instead of field_type.
gdb/ChangeLog:
* target-descriptions.c (maint_print_c_tdesc_cmd): Use "type" for
TYPE_CODE_FLAGS instead of "field_type", for consistency.
* features/i386/amd64-avx-linux.c: Regenerate.
* features/i386/amd64-avx.c: Regenerate.
* features/i386/amd64-avx512-linux.c: Regenerate.
* features/i386/amd64-avx512.c: Regenerate.
* features/i386/amd64-linux.c: Regenerate.
* features/i386/amd64-mpx-linux.c: Regenerate.
* features/i386/amd64-mpx.c: Regenerate.
* features/i386/amd64.c: Regenerate.
* features/i386/i386-avx-linux.c: Regenerate.
* features/i386/i386-avx.c: Regenerate.
* features/i386/i386-avx512-linux.c: Regenerate.
* features/i386/i386-avx512.c: Regenerate.
* features/i386/i386-linux.c: Regenerate.
* features/i386/i386-mmx-linux.c: Regenerate.
* features/i386/i386-mmx.c: Regenerate.
* features/i386/i386-mpx-linux.c: Regenerate.
* features/i386/i386-mpx.c: Regenerate.
* features/i386/i386.c: Regenerate.
* features/i386/x32-avx-linux.c: Regenerate.
* features/i386/x32-avx.c: Regenerate.
* features/i386/x32-avx512-linux.c: Regenerate.
* features/i386/x32-avx512.c: Regenerate.
* features/i386/x32-linux.c: Regenerate.
* features/i386/x32.c: Regenerate.
Doug Evans [Tue, 15 Mar 2016 19:44:34 +0000 (12:44 -0700)]
Remove hand-called function from test.
gdb/testsuite/ChangeLog:
* gdb.base/skip.c (main): Call test_skip_file_and_function.
* gdb.base/skip.exp: Remove hand calling test_skip_file_and_function.
H.J. Lu [Tue, 15 Mar 2016 18:46:51 +0000 (11:46 -0700)]
Bind defined symbol locally in PIE
Symbols defined in PIE should be bound locally, the same as -shared
-Bsymbolic.
bfd/
PR ld/19827
* elf32-i386.c (elf_i386_check_relocs): Bind defined symbol
locally in PIE.
(elf_i386_relocate_section): Likewise.
* elf64-x86-64.c (elf_x86_64_check_relocs): Likewise.
(elf_x86_64_relocate_section): Likewise.
ld/
PR ld/19827
* testsuite/ld-i386/i386.exp: Run PR ld/19827 tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/pr19827.rd: New file.
* testsuite/ld-i386/pr19827a.S: Likewise.
* testsuite/ld-i386/pr19827b.S: Likewise.
* testsuite/ld-x86-64/pr19827.rd: Likewise.
* testsuite/ld-x86-64/pr19827a.S: Likewise.
* testsuite/ld-x86-64/pr19827b.S: Likewise.
H.J. Lu [Tue, 15 Mar 2016 18:07:06 +0000 (11:07 -0700)]
Add -z noreloc-overflow option to x86-64 ld
Add -z noreloc-overflow command-line option to the x86-64 ELF linker to
disable relocation overflow check. This can be used to avoid relocation
overflow check if there will be no dynamic relocation overflow at
run-time.
bfd/
PR ld/19807
* elf64-x86-64.c (elf_x86_64_relocate_section): Check
no_reloc_overflow_check to diable R_X86_64_32/R_X86_64_32S
relocation overflow check.
include/
PR ld/19807
* bfdlink.h (bfd_link_info): Add no_reloc_overflow_check.
ld/
PR ld/19807
* Makefile.am (ELF_X86_DEPS): Add
$(srcdir)/emulparams/reloc_overflow.sh.
* Makefile.in: Regenerated.
* NEWS: Mention -z noreloc-overflow.
* ld.texinfo: Document -z noreloc-overflow.
* emulparams/elf32_x86_64.sh: Source
${srcdir}/emulparams/reloc_overflow.sh.
* emulparams/elf_x86_64.sh: Likewise.
* emulparams/reloc_overflow.sh: New file.
* testsuite/ld-x86-64/pr19807-1.s: New file.
* testsuite/ld-x86-64/pr19807-1a.d: Likewise.
* testsuite/ld-x86-64/pr19807-1b.d: Likewise.
* testsuite/ld-x86-64/pr19807-2.s: Likewise.
* testsuite/ld-x86-64/pr19807-2a.d: Likewise.
* testsuite/ld-x86-64/pr19807-2b.d: Likewise.
* testsuite/ld-x86-64/pr19807-2c.d: Likewise.
* testsuite/ld-x86-64/pr19807-2d.d: Likewise.
* testsuite/ld-x86-64/pr19807-2e.d: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run PR ld/19807 tests.
Pedro Alves [Tue, 15 Mar 2016 16:33:04 +0000 (16:33 +0000)]
Fix PR gdb/19676: Internal error in linux-thread.db.c if /proc not mounted
If /proc is not mounted, GDB fails an assertion in find_new_threads_once:
Continuing.
.../src/gdb/linux-thread-db.c:1249: internal-error: find_new_threads_once: Assertion `!target_has_execution' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
That was supposed to catch misuses of td_ta_thr_iter, which is unsafe
for live debugging. However, if /proc is not mounted, we still
fallback to using it.
I didn't bother with a warning, because GDB already prints several
others related to failing to open /proc files.
gdb/ChangeLog:
2016-03-15 Pedro Alves <palves@redhat.com>
PR gdb/19676
* linux-thread-db.c (try_thread_db_load_1): Leave
info->td_ta_thr_iter_p NULL iff debugging a live process and we
have /proc access.
(find_new_threads_once): Assert that we have a non-NULL
info->td_ta_thr_iter_p instead of checking whether the target has
execution.
Pedro Alves [Tue, 15 Mar 2016 16:33:04 +0000 (16:33 +0000)]
Fix PR gdb/19676: Disable displaced stepping if /proc not mounted
On GNU/Linux archs that support displaced stepping, if /proc is not
mounted, GDB gets stuck not able to step past breakpoints:
(gdb) c
Continuing.
dl_main (phdr=<optimized out>, phnum=<optimized out>, user_entry=<optimized out>, auxv=<optimized out>) at rtld.c:2163
2163 LIBC_PROBE (init_complete, 2, LM_ID_BASE, r);
Cannot find AT_ENTRY auxiliary vector entry.
(gdb) c
Continuing.
dl_main (phdr=<optimized out>, phnum=<optimized out>, user_entry=<optimized out>, auxv=<optimized out>) at rtld.c:2163
2163 LIBC_PROBE (init_complete, 2, LM_ID_BASE, r);
Cannot find AT_ENTRY auxiliary vector entry.
(gdb)
That's because GDB can't figure out where the scratch pad is.
This is a regression introduced by the earlier changes to make the
Linux native target always work in non-stop mode.
This commit makes GDB detect the case and fallback to stepping over
breakpoints in-line.
gdb/ChangeLog:
2016-03-15 Pedro Alves <palves@redhat.com>
PR gdb/19676
* infrun.c (displaced_step_prepare): Also disable displaced
stepping on NOT_SUPPORTED_ERROR.
* linux-tdep.c (linux_displaced_step_location): If reading auxv
fails, throw NOT_SUPPORTED_ERROR instead of generic error.
Pedro Alves [Tue, 15 Mar 2016 11:29:03 +0000 (11:29 +0000)]
Fix typo in previous gdb/doc/ commit
Should be s/reliability/reliably/.
gdb/doc/ChangeLog:
2016-03-15 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Tracepoint Actions): Fix typo.
Pedro Alves [Tue, 15 Mar 2016 11:08:52 +0000 (11:08 +0000)]
Document possible unreliability of '$_ret'
gdb/doc/ChangeLog:
2016-03-15 Pedro Alves <palves@redhat.com>
Andreas Arnez <arnez@linux.vnet.ibm.com>
Marcin Kościelnicki <koriakin@0x04.net>
* gdb.texinfo (Tracepoint Actions): Document possible
unreliability of '$_ret'.
Ulrich Drepper [Tue, 15 Mar 2016 11:00:28 +0000 (11:00 +0000)]
Update x86 register name documentation.
* doc/c-i386.texi (Register Naming): Update to details of the
latest architecture version.
GDB Administrator [Tue, 15 Mar 2016 00:00:19 +0000 (00:00 +0000)]
Automatic date update in version.in
H.J. Lu [Mon, 14 Mar 2016 20:17:22 +0000 (13:17 -0700)]
Regenerate bfd-in2.h
* bfd-in2.h: Regenerated.
Simon Marchi [Mon, 14 Mar 2016 16:42:54 +0000 (12:42 -0400)]
gdb.base/default.exp: Add missing $_as_string to "show convenience" test
When adding the $_as_string convenience function, I missed a new test
failure in default.exp. The tests lists the convenience functions, so
$_as_string should be added to the expected list.
Fixes:
+FAIL: gdb.base/default.exp: show convenience ($_caller_is = <internal function _caller_is> not found)
gdb/testsuite/ChangeLog:
* gdb.base/default.exp: Add $_as_string to the list of expected
convenience functions.
GDB Administrator [Mon, 14 Mar 2016 00:00:10 +0000 (00:00 +0000)]
Automatic date update in version.in
H.J. Lu [Sun, 13 Mar 2016 15:57:10 +0000 (08:57 -0700)]
Add more tests for PR ld/19539
PR ld/19539
* testsuite/ld-i386/i386.exp: Run pr19539.
* testsuite/ld-i386/pr19539.d: New file.
* testsuite/ld-i386/pr19539.s: Likewise.
* testsuite/ld-i386/pr19539.t: Likewise.
* testsuite/ld-x86-64/pr19539.s: Likewise.
* testsuite/ld-x86-64/pr19539.t: Likewise.
* testsuite/ld-x86-64/pr19539a.d: Likewise.
* testsuite/ld-x86-64/pr19539b.d: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run pr19539a and pr19539b.
Marcin Kościelnicki [Sat, 14 Nov 2015 22:08:07 +0000 (23:08 +0100)]
gdb/s390: Fill gen_return_address hook.
gdb/ChangeLog:
* s390-linux-tdep.c (s390_gen_return_address): New function.
(s390_gdbarch_init): Fill gen_return_address hook.
GDB Administrator [Sun, 13 Mar 2016 00:00:14 +0000 (00:00 +0000)]
Automatic date update in version.in
GDB Administrator [Sat, 12 Mar 2016 00:00:20 +0000 (00:00 +0000)]
Automatic date update in version.in
Andrew Burgess [Thu, 21 Jan 2016 10:03:32 +0000 (11:03 +0100)]
gdb: New maint info line-table command.
Add a new command 'maint info line-table' to display the contents of
GDB's internal line table structure. Useful when trying to understand
problems (within gdb) relating to line tables.
gdb/ChangeLog:
* symmisc.c (maintenance_info_line_tables): New function.
(maintenance_print_one_line_table): New function.
(_initialize_symmisc): Register 'maint info line-table' command.
* NEWS: Mention new command.
gdb/doc/ChangeLog:
* gdb.texinfo (Symbols): Document new 'maint info line-table'
command.
gdb/testsuite/ChangeLog:
* gdb.base/maint.exp: New tests for 'maint info line-table'.
Marcin Kościelnicki [Sat, 14 Nov 2015 20:18:18 +0000 (21:18 +0100)]
gdb/s390: Fill pseudo register agent expression hooks.
gdb/ChangeLog:
* s390-linux-tdep.c (s390_ax_pseudo_register_collect): New function.
(s390_ax_pseudo_register_push_stack): New function.
(s390_gdbarch_init): Fill ax_pseudo_register_collect and
ax_pseudo_register_push_stack hooks.
Dan Gissel [Fri, 11 Mar 2016 09:17:28 +0000 (09:17 +0000)]
Fix some places where octet to byte conversions are needed.
PR 19713
* elf.c (_bfd_elf_section_offset): Ensure that the returned offset
uses bytes not octets.
* elflink.c (resolve_section): Likewise.
Add a bfd parameter.
(eval_section): Pass the input_bfd to resolve_section.
(bfd_elf_perform_complex_relocation): Convert byte offset to
octets before read and writing values.
(elf_link_input_bfd): Add byte to octet conversions.
(elf_reloc_link_order): Likewise.
(elf_fixup_link_order): Likewise.
(bfd_elf_final_link): Likewise.
* reloc.c (_bfd_final_link_relocate): Likewise.
* syms.c (_bfd_stab_section_find_nearest_line): Likewise.
GDB Administrator [Fri, 11 Mar 2016 00:00:18 +0000 (00:00 +0000)]
Automatic date update in version.in
Simon Marchi [Thu, 10 Mar 2016 22:12:30 +0000 (17:12 -0500)]
Add $_as_string convenience function
This patch is a follow-up to "Add printf format specifier for printing
enumerator":
https://sourceware.org/ml/gdb-patches/2016-02/msg00144.html
Instead of having a solution specific to the printf command, Pedro
suggested adding a general purpose function $_as_string() that would
cover this use case and more.
So, in order to print the textual label of an enum, one can use:
(gdb) printf "Visiting node of type %s\n", $_as_string(node)
Visiting node of type NODE_INTEGER
gdb/ChangeLog:
* data-directory/Makefile.in (PYTHON_FILE_LIST): Install
gdb/function/as_string.py.
* python/lib/gdb/function/as_string.py: New file.
* NEWS: Mention the new $_as_string function.
gdb/testsuite/ChangeLog:
* gdb.python/py-as-string.exp: New file.
* gdb.python/py-as-string.c: New file.
gdb/doc/ChangeLog:
* gdb.texinfo (Convenience Functions): Document $_as_string.
Mickael Guene [Thu, 10 Mar 2016 16:05:29 +0000 (17:05 +0100)]
PR gas/19744: Thumb-1 pcrop relocations don't work on Thumb-2 targets
gas/
* config/tc-arm.c (do_arit): Protect against bad relocations usage.
(do_mov): Likewise.
(do_t_add_sub): Allow pcrop relocations for Thumb-2 targets.
(do_t_mov_cmp): Likewise.
(do_t_add_sub): Protect against bad relocations usage.
(do_t_mov_cmp): Likewise.
gas/testsuite/
* gas/arm/adds-thumb1-reloc-local-armv7-m.s: New.
* gas/arm/adds-thumb1-reloc-local-armv7-m.d: New.
* gas/arm/movs-thumb1-reloc-local-armv7-m.s: New.
* gas/arm/movs-thumb1-reloc-local-armv7-m.d: New.
ld/
* testsuite/ld-arm/arm-elf.exp: New tests.
* testsuite/ld-arm/thumb1-adds-armv7-m.s: New.
* testsuite/ld-arm/thumb1-movs-armv7-m.s: New.
Nick Clifton [Thu, 10 Mar 2016 15:29:42 +0000 (15:29 +0000)]
Mark the i370 target as obsolete.
* config.bfd: Mark the i370 target as obsolete.
Nick Clifton [Thu, 10 Mar 2016 10:37:19 +0000 (10:37 +0000)]
Remove bogus LONG(0) from MSP430 built in linker script.
ld * scripttempl/elf32msp430.sc (.rodata): Remove spurious LONG(0).
GDB Administrator [Thu, 10 Mar 2016 00:00:18 +0000 (00:00 +0000)]
Automatic date update in version.in
Pedro Alves [Wed, 9 Mar 2016 20:24:14 +0000 (20:24 +0000)]
More "Program" -> "Thread NN received signal" testsuite adjustment
These tests should have been adjusted by
f303dbd60d9c (Fix PR
threads/19422 - show which thread caused stop), but clearly I had
missed grepping for potential-fail cases.
gdb/testsuite/ChangeLog
2016-03-09 Pedro Alves <palves@redhat.com>
* gdb.threads/attach-into-signal.exp: Adjust to "Program received
signal" -> "Thread NN received signal" output change.
* gdb.threads/ia64-sigill.exp: Likewise.
* gdb.threads/linux-dp.exp: Likewise.
* gdb.threads/manythreads.exp: Likewise.
* gdb.threads/pending-step.exp: Likewise.
* gdb.threads/print-threads.exp: Likewise.
* gdb.threads/sigstep-threads.exp: Likewise.
* gdb.threads/staticthreads.exp: Likewise.
* gdb.threads/tls.exp: Likewise.
Jose E. Marchesi [Wed, 9 Mar 2016 19:17:54 +0000 (11:17 -0800)]
gdb: fix doc string of target_can_use_hardware_watchpoint.
gdb/ChangeLog
2016-03-09 Jose E. Marchesi <jose.marchesi@oracle.com>
* target.h: Fix doc string of target_can_use_hardware_watchpoint.
Pedro Alves [Wed, 9 Mar 2016 18:25:00 +0000 (18:25 +0000)]
Command line input handling TLC
I didn't manage to usefully split this further into smaller
independent pieces, so:
- Use "struct buffer" more.
- Split out the responsibility of composing a complete command line
from multiple input lines split with backslash
(
E.g.:
(gdb) print \
1 + \
2
$1 = 3
(gdb)
)
to a separate function. Note we don't need the separate
readline_input_state and more_to_come globals at all. They were
just obfuscating the logic.
- Factor out the tricky mostly duplicated code in
command_line_handler and command_line_input.
gdb/ChangeLog
2016-03-09 Pedro Alves <palves@redhat.com>
* event-top.c (more_to_come): Delete.
(struct readline_input_state): Delete.
(readline_input_state): Delete.
(get_command_line_buffer): New function.
(command_handler): Update comments. Don't handle NULL commands
here. Do not execute commented lines.
(command_line_append_input_line): New function.
(handle_line_of_input): New function, partly based on
command_line_handler and command_line_input.
(command_line_handler): Rewrite.
* event-top.h (command_handler): New declaration.
(command_loop): Defer command execution to command_handler.
(command_line_input): Update comments. Simplify, using struct
buffer and handle_line_of_input.
* top.h (struct buffer): New forward declaration.
(handle_line_of_input): New declaration.
Pedro Alves [Wed, 9 Mar 2016 18:25:00 +0000 (18:25 +0000)]
Simplify saved_command_line handling
There doesn't seem to be much point in trying to reuse this buffer.
Prefer simplicity instead.
(In case you're wondering whether this fixes an off-by-one: linelength
is misnamed; it's really a size including terminating null char.)
gdb/ChangeLog:
2016-03-09 Pedro Alves <palves@redhat.com>
* event-top.c (command_line_handler): Use xfree + xstrdup instead
of xrealloc + strcpy.
* main.c (captured_main): Use xstrdup instead of xmalloc plus
manual clear.
* top.c (saved_command_line): Rewrite comment.
(saved_command_line_size): Delete.
(command_line_input): Use xfree + xstrdup instead of xrealloc +
strcpy.
* top.h (saved_command_line_size): Delete declaration.
Pedro Alves [Wed, 9 Mar 2016 18:25:00 +0000 (18:25 +0000)]
Use struct buffer in gdb_readline_no_editing_callback
gdb/ChangeLog:
2016-03-09 Pedro Alves <palves@redhat.com>
* event-top.c: Include buffer.h.
(gdb_readline_no_editing_callback): Use struct buffer instead
of xrealloc.
Pedro Alves [Wed, 9 Mar 2016 18:25:00 +0000 (18:25 +0000)]
Use struct buffer in gdb_readline_no_editing
gdb/ChangeLog:
2016-03-09 Pedro Alves <palves@redhat.com>
* common/buffer.h (buffer_grow_char): New function.
* top.c: Include buffer.h.
(gdb_readline_no_editing): Rename 'prompt_arg' parameter to
'prompt'. Use struct buffer instead of xrealloc.
Pedro Alves [Wed, 9 Mar 2016 18:24:59 +0000 (18:24 +0000)]
gdb_readline -> gdb_readline_no_editing
Name this such that it's clearer that this is not a wrapper for the
real readline, but instead a replacement that provides no command line
editing features.
gdb/ChangeLog:
2016-03-09 Pedro Alves <palves@redhat.com>
* defs.h (gdb_readline): Delete declaration.
* top.c (gdb_readline): Rename to ...
(gdb_readline_no_editing): ... this, and make static.
Pedro Alves [Wed, 9 Mar 2016 18:24:59 +0000 (18:24 +0000)]
Update prompt_for_continue comments
These comments are out of date -- we no longer call gdb_readline. And
I think that mentioning the event loop is more useful here than
whatever GO32 issue had with gdb_readline, which may even no longer be
an issue.
gdb/ChangeLog:
2016-03-09 Pedro Alves <palves@redhat.com>
* utils.c (prompt_for_continue): Update comments.
Pedro Alves [Wed, 9 Mar 2016 18:24:59 +0000 (18:24 +0000)]
Eliminate async_annotation_suffix
The comments and existence of this global are a bit of misleading
obfuscation, since this is only ever used to print the prompt
annotation, and never changes. Just hardcode "prompt" where
necessary, as done for most other annotations.
gdb/ChangeLog:
2016-03-09 Pedro Alves <palves@redhat.com>
* event-top.c (async_annotation_suffix): Delete.
(top_level_prompt, command_line_handler): Don't use
'async_annotation_suffix' and simplify.
* event-top.h (async_annotation_suffix): Delete declaration.
(init_main): Remove reference to 'async_annotation_suffix'.
Pedro Alves [Wed, 9 Mar 2016 18:24:59 +0000 (18:24 +0000)]
gdb_readline2 -> gdb_readline_no_editing_callback
The "2" in "gdb_readline2" doesn't really convey much. Rename for
clarity.
gdb/ChangeLog:
2016-03-09 Pedro Alves <palves@redhat.com>
* event-top.c (gdb_readline2): Rename to ...
(gdb_readline_no_editing_callback): ... this.
(change_line_handler, stdin_event_handler)
(gdb_setup_readline): Adjust.
* event-top.h (gdb_readline2): Rename to ...
(gdb_readline_no_editing_callback): ... this, and move closer to
other readline-related declarations.
* mi/mi-interp.c (mi_interpreter_resume): Adjust.
Pedro Alves [Wed, 9 Mar 2016 18:24:59 +0000 (18:24 +0000)]
Garbage collect window_hook
I checked, and Insight doesn't set this.
gdb/ChangeLog:
2016-03-09 Pedro Alves <palves@redhat.com>
* top.c (window_hook): Delete.
(command_loop): Remove references to window_hook.
Pedro Alves [Wed, 9 Mar 2016 18:24:58 +0000 (18:24 +0000)]
Test issuing a command split in multiple lines with continuation chars
I happened to break this locally and the testsuite didn't notice it.
Add some tests.
gdb/ChangeLog:
2016-03-09 Pedro Alves <palves@redhat.com>
* gdb.base/command-line-input.exp: New file.
Marcin Kościelnicki [Thu, 7 Jan 2016 15:48:02 +0000 (16:48 +0100)]
gdb: Add tracepoint support for powerpc.
gdb/gdbserver/ChangeLog:
* linux-ppc-low.c (ppc_supports_tracepoints): New function.
(struct linux_target_ops): Wire in the above.
gdb/testsuite/ChangeLog:
* gdb.trace/ftrace.exp: Set arg0exp for ppc.
* gdb.trace/mi-trace-unavailable.exp: Set pcnum for ppc.
* gdb.trace/pending.exp: Accept leading dot before function name.
* gdb.trace/trace-common.h: Add fast tracepoint dummy insn for ppc.
* lib/trace-support.exp: Set registers for ppc.
Marcin Kościelnicki [Sun, 6 Mar 2016 16:20:08 +0000 (17:20 +0100)]
gdb.trace/entry-values.exp: Fixes for powerpc64.
On powerpc64, "disassemble foo" doesn't work properly on object files
(it can't process the relocations in .opd section) - instead, let's
link it into an executable and load that.
Also, backtrace displays .main, not main. Accept both.
gdb/testsuite/ChangeLog:
* gdb.trace/entry-values.exp: Link ${binfile}1.o to ${binfile}1 and
use it for disassembly; accept .main in addition to main in backtrace.
Marcin Kościelnicki [Fri, 19 Feb 2016 04:04:13 +0000 (05:04 +0100)]
gdb.trace/tfind.exp: Force call via global entry point on ppc64le.
tfind.exp sets a breakpoint on *gdb_recursion_test, which is the global
entry point on ppc64le, and won't be hit, since the call uses
the local entry. Fix by calling the function via a pointer in a global
variable, forcing use of the global entry.
This patch is a slightly modified hunk extracted from
https://sourceware.org/ml/gdb-patches/2015-07/msg00353.html
gdb/testsuite/ChangeLog:
2016-03-09 Wei-cheng Wang <cole945@gmail.com>
Marcin Kościelnicki <koriakin@0x04.net>
* gdb.trace/actions.c (gdb_recursion_test_fp): New typedef.
(gdb_recursion_test_ptr): New global variable.
(gdb_recursion_test): Call gdb_recursion_test_ptr instead of
gdb_recursion_test.
(gdb_c_test): Ditto.
Marcin Kościelnicki [Sat, 5 Mar 2016 17:55:40 +0000 (18:55 +0100)]
gdb.trace/change-loc.exp: Don't depend on tracepoint ordering.
powerpc (32-bit) loads shared libraries below the main executable, so
the PENDING location is the first one, which the current regex doesn't
match. Split it into two tests instead, one looking for the pending
tracepoint location, and the other for two installed locations.
gdb/testsuite/ChangeLog:
* gdb.trace/change-loc.exp: Don't depend on tracepoint location
ordering.
Marcin Kościelnicki [Sat, 5 Mar 2016 13:48:47 +0000 (14:48 +0100)]
gdb.trace: Use manually-defined start labels in unavailable-dwarf-piece.exp
On powerpc64, foo/bar point to a function descriptor, not to function code.
Since there are no global labels pointing at the actual function code,
let's make our own.
Regression-tested on x86_64.
gdb/testsuite/ChangeLog:
* gdb.trace/unavailable-dwarf-piece.c (foo): Add foo_start_lbl label.
(bar): Add bar_start_lbl label.
* gdb.trace/unavailable-dwarf-piece.exp: Use foo/bar_start_lbl instead
of foo/bar for emitting DWARF and tracing.
Marcin Kościelnicki [Sun, 6 Mar 2016 15:38:52 +0000 (16:38 +0100)]
gdb/rs6000: Read backchain as unsigned.
Previously, backchain was read as a signed quantity, resulting in
addresses like 0xfffffffffffeded0 instead of 0xfffeded0 returned by
unwinder on 32-bit powerpc. While normally such addresses are masked
off, this causes problems for tracepoints, since 0xfffffffffffeded0
is considered unavailable.
Fixes a test failure in gdb.trace/entry-values.exp.
gdb/ChangeLog:
* corefile.c (safe_read_memory_unsigned_integer): New function.
* gdbcore.h (safe_read_memory_unsigned_integer): New prototype.
* rs6000-tdep.c (rs6000_frame_cache): Read backchain as unsigned.
Marcin Kościelnicki [Thu, 7 Jan 2016 16:24:48 +0000 (17:24 +0100)]
gdb: Add gen_return_address for powerpc.
gdb/ChangeLog:
* rs6000-tdep.c: Add "ax.h" and "ax-gdb.h" includes.
(rs6000_gen_return_address): New function.
(rs6000_gdbarch_init): Wire in the above.
Marcin Kościelnicki [Thu, 7 Jan 2016 16:19:25 +0000 (17:19 +0100)]
gdb: Add ax_pseudo_register_collect for powerpc.
gdb/ChangeLog:
* rs6000-tdep.c (rs6000_ax_pseudo_register_collect): New function.
(rs6000_gdbarch_init): Wire in the above.
H.J. Lu [Wed, 9 Mar 2016 16:27:03 +0000 (08:27 -0800)]
Workaround a C++ bug in GCC 4.2 in gold test
G++ in GCC 4.2 silently ignores
---
__attribute__ ((section(".rodata.v1_a2")))
const short rodata_item1 = 101;
---
which leads to plugin_layout_with_alignment test failure with
Expected 12 sections, found 8 sections
since 4 .rodata sections are missing. As a workaround, this patch
changes plugin_layout_with_alignment test from C++ to C.
* testsuite/plugin_layout_with_alignment.cc: Renamed to ..
* testsuite/plugin_layout_with_alignment.c: This.
* testsuite/Makefile.am (plugin_layout_with_alignment.o): Updated.
(plugin_layout_with_alignment): Likewise.
* testsuite/Makefile.in: Regenerated.
Andreas Arnez [Wed, 9 Mar 2016 16:12:29 +0000 (17:12 +0100)]
S390: Recognize special jumps in prologue parser
Functions compiled with the gcc option `-mhotpatch' may start with a
branch-never BRCL instruction as a 6-byte NOP. And functions compiled
with `-mstack-size' contain a BRC instruction in their prologue that is
actually a conditional trap. Both of these special jumps cause the
prologue parser to stop and yield bad unwinding results.
This change makes the prologue analyzer recognize such special jumps and
ignore them.
gdb/ChangeLog:
* s390-linux-tdep.c (s390_analyze_prologue): Ignore BRC and BRCL
instructions that do nothing or are conditional traps.
Andreas Arnez [Wed, 9 Mar 2016 16:12:29 +0000 (17:12 +0100)]
S390: Add use of unavailable-stack frame ID
When determining the frame ID of an inline frame, GDB currently asserts
that a valid ID of the underlying real frame is found, and that it does
not match outer_frame_id. From inline_frame_this_id():
/* For now, require we don't match outer_frame_id either (see
comment above). */
gdb_assert (!frame_id_eq (*this_id, outer_frame_id));
However, this assertion may fail when the real frame's unwinder can not
determine the frame ID. This happened on an s390x target with a binary
that lacked call frame information and also confused the prologue
analyzer, because then s390_frame_this_id() left the frame ID at its
default.
To fix this, this change enhances s390_frame_this_id such that an
unavailable-stack frame ID is built if no frame base can be determined
but the function address is available.
gdb/ChangeLog:
* s390-linux-tdep.c (s390_prologue_frame_unwind_cache): Store
frame func's PC in info->func before any other failure can occur.
(s390_frame_this_id): Use frame_id_build_unavailable_stack if
info->func has been filled out.
Pedro Alves [Wed, 9 Mar 2016 15:52:43 +0000 (15:52 +0000)]
Avoid spaces in osabi names
It's not possible today to select some of the osabis by name.
Specifically, those that have spaces in their names and then the first
word is ambiguous...
For example:
(gdb) set osabi <TAB>
[...]
FreeBSD ELF
FreeBSD a.out
[...]
(gdb) set osabi FreeBSD ELF
Ambiguous item "FreeBSD ELF".
In reality, because "set osabi" is an enum command, that was
equivalent to trying "set osabi FreeBSD", which is then obviously
ambiguous, because of "FreeBSD ELF" and "FreeBSD a.out".
Also, even if the first word is not ambiguous, we actually ignore
whatever comes after the first word:
(gdb) set osabi GNU/Linux
(gdb) show osabi
The current OS ABI is "GNU/Linux".
The default OS ABI is "GNU/Linux".
(gdb) set osabi Windows SomeNonsense
^^^^^^^^^^^^
(gdb) show osabi
The current OS ABI is "Windows CE".
The default OS ABI is "GNU/Linux".
(gdb)
Fix this by avoiding spaces in osabi names.
We could instead make "set osabi" have a custom set hook, or
alternatively make the enum set hook (in cli-setshow.c) handle values
with spaces, but OTOH, I have a feeling that could cause trouble.
E.g., in cases where we might want to write more than one enum value
in the same line. We could support quoting as workaround, but, not
sure we want that. "No spaces" seems like a simpler rule.
gdb/ChangeLog:
2016-03-09 Pedro Alves <palves@redhat.com>
* osabi.c (gdb_osabi_names): Avoid spaces in osabi names.
Pedro Alves [Wed, 9 Mar 2016 15:46:31 +0000 (15:46 +0000)]
[FR-V] Handle FR300
Even though "set architecture" presents fr300 as option:
(gdb) set architecture fr<TAB>
fr300 fr400 fr450 fr500 fr550 frv
Actually selecting fr300 doesn't work:
(gdb) set architecture fr300
Architecture `fr300' not recognized.
The target architecture is set automatically (currently i386)
(gdb)
This just looks like an obvious oversight. Looking around gcc and
binutils sources, FR300 is basically a FR500 specialized for DSP and
low power.
gdb/ChangeLog:
2016-03-09 Pedro Alves <palves@redhat.com>
* frv-tdep.c (frv_gdbarch_init): Handle bfd_mach_fr300.
Pedro Alves [Wed, 9 Mar 2016 15:43:13 +0000 (15:43 +0000)]
Fix v850 bfd arch info printable names
Currently, it's not possible to manually set some of the v850 archs in
gdb:
(gdb) set architecture v850<TAB>
v850 (using old gcc ABI)
v850-rh850
v850e
v850e (using old gcc ABI)
v850e1
[...]
(gdb) set architecture v850 (using old gcc ABI)
Ambiguous item "v850 (using old gcc ABI)".
The problem is that "set architecture" is a GDB "enum command", and
GDB only considers an enum value to be the string up until the first
space. So writing "v850 (using old gcc ABI)" is the same as writing
"v850", and then that's not an unambiguous arch printable name prefix.
v850 is actually the only arch that has spaces in its printable name.
One can conveniently see that with e.g.:
(gdb) set max-completions unlimited
(gdb) complete set architecture
...
Rather than hack GDB into accepting this somehow, make v850 arch
printable names more like the printable names of the other archs, and
put the abi variant in the "machine" part, after a ':'.
We now get:
(gdb) set architecture v850<TAB>
v850:old-gcc-abi
v850:rh850
v850e
v850e1
v850e1:old-gcc-abi
v850e2
v850e2:old-gcc-abi
[...]
And now "set architecture v850:old-gcc-abi" works as expected.
I ran the binutils/gas/ld testsuites, and found no regressions. I
don't have a cross compiler handy, but I ran the gdb tests anyway,
which covers at least some snoke testing.
I think that the OUTPUT_ARCH in ld/scripttempl/v850.sc may have got
broken with the previous 2012 change, since I hacked v850_rh850.sc to
output "v850" and ld failed to grok it. I think it only works if the
old GCC ABI is the configured v850 default ABI. That's now fixed by
changing to use explicit v850:old-gcc-abi.
Also, this actually "fixes" an existing GDB test, which isn't likewise
expecting spaces in arch names, when GDB is configured for
--target=v850:
(gdb) FAIL: gdb.xml/tdesc-arch.exp: read valid architectures
bfd/ChangeLog:
2016-03-09 Pedro Alves <palves@redhat.com>
* cpu-v850.c (N): Append ":old-gcc-abi" instead of " (using old
gcc ABI)" to printable name.
* cpu-v850_rh850.c (bfd_v850_rh850_arch): Use "v850:rh850" instead
of "v850-rh850" as printable name.
ld/ChangeLog:
2016-03-09 Pedro Alves <palves@redhat.com>
* scripttempl/v850.sc: Use "v850:old-gcc-abi" as OUTPUT_ARCH.
* scripttempl/v850_rh850.sc: Use "v850:rh850" as OUTPUT_ARCH.
Leon Winter [Wed, 9 Mar 2016 15:26:45 +0000 (15:26 +0000)]
For COFF and COFF/PE targets, skip relocations against absolute symbols.
PR ld/19623
* cofflink.c (_bfd_coff_generic_relocate_section): Do not apply
relocations against absolute symbols.
Trevor Saunders [Wed, 9 Mar 2016 01:02:07 +0000 (20:02 -0500)]
fixup -Wshadow warnings on gcc-4.7
gcc 4.7 complains about variables that shadow function names, which now happens
in tc-arm.c because there is a global function do_align (), and local variables
do_align. The simplest fix for this seems to be to rename those variables to
do_alignment.
gas/ChangeLog:
2016-03-09 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-arm.c (neon_alignment_bit): Rename do_align to
do_alignment.
(do_neon_ld_st_lane): Likewise.
(do_neon_ld_dup): Likewise.
Alan Modra [Wed, 9 Mar 2016 05:40:53 +0000 (16:10 +1030)]
Allow zero length archive elements
PR binutils/19775
* coff-alpha.c (alpha_ecoff_openr_next_archived_file): Allow zero
length elements in the archive.
H.J. Lu [Wed, 9 Mar 2016 04:41:41 +0000 (20:41 -0800)]
Don't create dynamic sections when relocatable
Since dynamic sections aren't applicable to relocatable file, don't
create dynamic sections for -E/--dynamic-list when relocatable.
bfd/
PR ld/19789
* elflink.c (elf_link_add_object_symbols): Create dynamic sections
for -E/--dynamic-list only when not relocatable.
ld/
PR ld/19789
* testsuite/ld-elf/pr19789.d: New file.
* testsuite/ld-elf/pr19789.s: Likewise.
Cary Coutant [Wed, 9 Mar 2016 04:30:26 +0000 (20:30 -0800)]
Remove checks for constructors that might have been eliminated by GCC.
GCC 6 does not generate constructors for two of gold's test cases.
This patch simply removes the checks for them.
gold/
PR 19751
* testsuite/Makefile.am (retain_symbols_file_test): Remove check
for constructor.
* testsuite/Makefile.in: Regenerate.
* testsuite/dynamic_list.sh: Likewise.
* testsuite/retain_symbols_file_test.sh: Likewise.
Cary Coutant [Thu, 3 Mar 2016 22:13:10 +0000 (14:13 -0800)]
Add unused attribute where necessary to quiet GCC 6 warnings.
gold/
PR 19751
* arm.cc (Reloc_stub::Key::name): Add unused attribute.
* dirsearch.cc (Dir_caches::~Dir_caches): Likewise.
Cary Coutant [Wed, 9 Mar 2016 03:52:07 +0000 (19:52 -0800)]
Fix Makefile so make clean removes overlooked files.
gold/
* testsuite/Makefile.am: Add to MOSTLYCLEANFILES.
* testsuite/Makefile.in: Regenerate.
Pedro Alves [Tue, 8 Mar 2016 01:45:09 +0000 (01:45 +0000)]
[CRIS] Don't internal error if forced big endian
This fixes:
$ ./gdb -q -ex "set endian big" -ex "set architecture cris"
The target is assumed to be big endian
.../src/gdb/cris-tdep.c:4051: internal-error: cris_gdbarch_init: big endian byte order in info
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
The "set cris-version" command can likewise cause internal errors.
The gdbarch init routine should be returning 0 to reject the
architecture instead of internal erroring on user input.
gdb/ChangeLog:
2016-03-09 Pedro Alves <palves@redhat.com>
* cris-tdep.c (cris_gdbarch_init): Return 0 if the info's byte
order is BFD_ENDIAN_BIG or if the cris version is unsupported.
Pedro Alves [Wed, 9 Mar 2016 03:01:06 +0000 (03:01 +0000)]
Fix floating conversion buffer overrun when host/target format matches
Running the testsuite with a gdb configured with --enable-libmcheck
reveals a problem:
(gdb) ptype 3 * 2.0
type = <12-byte float>
memory clobbered past end of allocated block
ERROR: Process no longer exists
UNRESOLVED: gdb.ada/ptype_arith_binop.exp: ptype 3 * 2.0
(gdb) PASS: gdb.dlang/expression.exp: ptype 0x1.FFFFFFFFFFFFFp1023
ptype 0x1p-52L
type = real
memory clobbered past end of allocated block
ERROR: Process no longer exists
UNRESOLVED: gdb.dlang/expression.exp: ptype 0x1p-52L
Even though this shows up with Ada and D, it's easy to reproduce in C
too. We just need to print a long double, when the current arch is
32-bit, which is the default when gdb starts up:
$ ./gdb -q -ex "ptype 1.0L"
type = long double
memory clobbered past end of allocated block
Aborted (core dumped)
Valgrind shows:
==22159== Invalid write of size 8
==22159== at 0x8464A9: floatformat_from_doublest (doublest.c:756)
==22159== by 0x846822: store_typed_floating (doublest.c:867)
==22159== by 0x6A7959: value_from_double (value.c:3662)
==22159== by 0x6A9F2D: evaluate_subexp_standard (eval.c:745)
==22159== by 0x7F31AF: evaluate_subexp_c (c-lang.c:716)
==22159== by 0x6A8986: evaluate_subexp (eval.c:79)
==22159== by 0x6A8BA3: evaluate_type (eval.c:174)
==22159== by 0x817CCF: whatis_exp (typeprint.c:456)
==22159== by 0x817EAA: ptype_command (typeprint.c:508)
==22159== by 0x5F267B: do_cfunc (cli-decode.c:105)
==22159== by 0x5F5618: cmd_func (cli-decode.c:1885)
==22159== by 0x83622A: execute_command (top.c:475)
==22159== Address 0x8c6cb28 is 8 bytes inside a block of size 12 alloc'd
==22159== at 0x4C2AA98: calloc (vg_replace_malloc.c:711)
==22159== by 0x87384A: xcalloc (common-utils.c:83)
==22159== by 0x873889: xzalloc (common-utils.c:93)
==22159== by 0x6A34CB: allocate_value_contents (value.c:1036)
==22159== by 0x6A3501: allocate_value (value.c:1047)
==22159== by 0x6A790A: value_from_double (value.c:3656)
==22159== by 0x6A9F2D: evaluate_subexp_standard (eval.c:745)
==22159== by 0x7F31AF: evaluate_subexp_c (c-lang.c:716)
==22159== by 0x6A8986: evaluate_subexp (eval.c:79)
==22159== by 0x6A8BA3: evaluate_type (eval.c:174)
==22159== by 0x817CCF: whatis_exp (typeprint.c:456)
==22159== by 0x817EAA: ptype_command (typeprint.c:508)
==22159==
type = long double
(gdb)
Even if the target and host floating-point formats match, the length
of the types might still be different. On x86, long double is the
80-bit extended precision type on both 32-bit and 64-bit ABIs, but by
default it is stored as 12 bytes on 32-bit, and 16 bytes on 64-bit,
for alignment reasons. Several places in doublest.c already consider
this, but floatformat_to_doublest and floatformat_from_doublest miss
it. E.g., convert_typed_floating and store_typed_floating,
Tested on x86-64 Fedora 23 with --enable-libmcheck, where it fixes the
crashed above.
gdb/ChangeLog:
2016-03-09 Pedro Alves <palves@redhat.com>
* doublest.c: Extend comments.
(floatformat_to_doublest, floatformat_from_doublest): Copy the
floatformat's total size, not the host type's size.
Pedro Alves [Wed, 9 Mar 2016 02:29:39 +0000 (02:29 +0000)]
Assert that a floating type's length is at least as long as its format
This would have caught the HP/PA bug fixed in the previous patch:
.../src/gdb/gdbtypes.c:4690: internal-error: arch_float_type: Assertion `len >= floatformat_totalsize_bytes (floatformats[0])' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
Tested on x86-64 Fedora 23, --enable-targets=all.
gdb/ChangeLog:
2016-03-09 Pedro Alves <palves@redhat.com>
* doublest.c (floatformat_totalsize_bytes): New function.
(floatformat_from_type): Assert that the type's length is at least
as long as the floatformat's totalsize.
* doublest.h (floatformat_totalsize_bytes): New declaration.
* gdbtypes.c (arch_float_type): Assert that the type's length is
at least as long as the floatformat's totalsize.
Pedro Alves [Wed, 9 Mar 2016 01:50:02 +0000 (01:50 +0000)]
Fix HP/PA GNU/Linux "long double" format
This:
$ ./gdb -ex "set architecture hppa1.0" -ex "set osabi GNU/Linux" -ex "ptype 1.0L"
Shows that HPPA/Linux support for long doubles is broken. It causes
GDB to access memory out of bounds. With Valgrind, we see:
The target architecture is assumed to be hppa1.0
==4371== Invalid write of size 8
==4371== at 0x4C2F21F: memset (vg_replace_strmem.c:1224)
==4371== by 0x8451C4: convert_doublest_to_floatformat (doublest.c:362)
==4371== by 0x845F86: floatformat_from_doublest (doublest.c:769)
==4371== by 0x84628E: store_typed_floating (doublest.c:873)
==4371== by 0x6A7C3D: value_from_double (value.c:3662)
==4371== by 0x6AA211: evaluate_subexp_standard (eval.c:745)
==4371== by 0x7F306D: evaluate_subexp_c (c-lang.c:716)
==4371== by 0x6A8C6A: evaluate_subexp (eval.c:79)
==4371== by 0x6A8E87: evaluate_type (eval.c:174)
==4371== by 0x817B8D: whatis_exp (typeprint.c:456)
==4371== by 0x817D68: ptype_command (typeprint.c:508)
==4371== by 0x5F2977: do_cfunc (cli-decode.c:105)
==4371== Address 0x8998d18 is 0 bytes after a block of size 8 alloc'd
==4371== at 0x4C2AA98: calloc (vg_replace_malloc.c:711)
==4371== by 0x8732B6: xcalloc (common-utils.c:83)
==4371== by 0x8732F5: xzalloc (common-utils.c:93)
==4371== by 0x6A37AF: allocate_value_contents (value.c:1036)
==4371== by 0x6A37E5: allocate_value (value.c:1047)
==4371== by 0x6A7BEE: value_from_double (value.c:3656)
==4371== by 0x6AA211: evaluate_subexp_standard (eval.c:745)
==4371== by 0x7F306D: evaluate_subexp_c (c-lang.c:716)
==4371== by 0x6A8C6A: evaluate_subexp (eval.c:79)
==4371== by 0x6A8E87: evaluate_type (eval.c:174)
==4371== by 0x817B8D: whatis_exp (typeprint.c:456)
==4371== by 0x817D68: ptype_command (typeprint.c:508)
The trouble is that hppa_linux_init_abi overrides the default
long_double_bit set by the generic hppa-tdep.c:
set_gdbarch_long_double_bit (gdbarch, 128);
set_gdbarch_long_double_format (gdbarch, floatformats_ia64_quad);
with:
/* On hppa-linux, currently, sizeof(long double) == 8. There has been
some discussions to support 128-bit long double, but it requires some
more work in gcc and glibc first. */
set_gdbarch_long_double_bit (gdbarch, 64);
which misses overriding the long_double_format, so we end with a weird
combination of:
set_gdbarch_long_double_bit (gdbarch, 64);
set_gdbarch_long_double_format (gdbarch, floatformats_ia64_quad);
Weird because floatformats_ia64_quad's totalsize is longer than 64-bits.
The floatformat conversion routines use the struct floatformat's
totalsize (in bits) to know how much to copy/convert, thus the buffer
overruns.
gdb/ChangeLog:
2016-03-09 Pedro Alves <palves@redhat.com>
* hppa-linux-tdep.c (hppa_linux_init_abi): Set the long double
format to floatformats_ieee_double.
GDB Administrator [Wed, 9 Mar 2016 00:00:09 +0000 (00:00 +0000)]
Automatic date update in version.in
Cary Coutant [Tue, 8 Mar 2016 20:24:39 +0000 (12:24 -0800)]
Refactor Output_data_reloc_base::do_write for MIPS-specific relocs.
This patch is a simple refactoring that will allow the MIPS backend to
replace the Output_data_reloc_base::do_write() method without copying
its entire implementation. I've moved the implementation of do_write()
into a function template, which can be instantiated with a custom
class to write the MIPS-specific relocation format. The custom class
for MIPS needs access to the symbol index and address from
Output_reloc, so I've included the part of Vlad's MIPS-64 patch that
makes those accessor methods public.
2016-03-08 Cary Coutant <ccoutant@gmail.com>
Vladimir Radosavljevic <vladimir.radosavljevic@imgtec.com>
gold/
* output.cc (Output_reloc_writer): New type.
(Output_data_reloc_base::do_write): Move implementation to template
in output.h and replace with invocation of template.
* output.h (Output_file): Move to top of file.
(Output_reloc::get_symbol_index): Move to public interface.
(Output_reloc::get_address): Likewise.
(Output_data_reloc_base::do_write_generic): New function template.