Dave Airlie [Mon, 27 Aug 2012 06:22:20 +0000 (16:22 +1000)]
Merge branch 'master' of git://git./linux/kernel/git/torvalds/linux into drm-next
There was some merge conflicts in -next and they weren't so pretty, so
backmerge now to avoid them.
Conflicts:
drivers/gpu/drm/i915/i915_gem.c
drivers/gpu/drm/i915/intel_modes.c
Linus Torvalds [Sun, 26 Aug 2012 20:02:51 +0000 (13:02 -0700)]
Merge tag 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/linux-staging
Pull a hwmon fix from Guenter Roeck:
"Fix sensor readings for Asus M5A78L in asus_atk0110 driver."
* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (asus_atk0110) Add quirk for Asus M5A78L
Linus Torvalds [Sun, 26 Aug 2012 17:14:11 +0000 (10:14 -0700)]
Merge tag 'for-linus' of git://github.com/prasad-joshi/logfs_upstream
Pull LogFS bugfixes from Prasad Joshi:
- "logfs: query block device for number of pages to send with bio"
This BUG was found when LogFS was used on KVM. The patch fixes
the problem by asking for underlaying block device the number
of pages to send with each BIO.
- "logfs: maintain the ordering of meta-inode destruction"
LogFS maintains file system meta-data in special inodes. These
inodes are releated to each other, therefore they must be
destroyed in a proper order.
- "logfs: initialize the number of iovecs in bio"
LogFS used to panic when it was created on an encrypted LVM
volume. The patch fixes the problem by properly initializing
the BIO.
Plus a couple more:
- logfs: create a pagecache page if it is not present
- logfs: destroy the reserved inodes while unmounting
* tag 'for-linus' of git://github.com/prasad-joshi/logfs_upstream:
logfs: query block device for number of pages to send with bio
logfs: maintain the ordering of meta-inode destruction
logfs: create a pagecache page if it is not present
logfs: initialize the number of iovecs in bio
logfs: destroy the reserved inodes while unmounting
Linus Torvalds [Sun, 26 Aug 2012 00:33:33 +0000 (17:33 -0700)]
Merge tag 'fixes-3.6-rc3' of git://git./linux/kernel/git/arm/arm-soc
Pull arm-soc fixes from Arnd Bergmann:
"Bug fixes for various ARM platforms. About half of these are for OMAP
and submitted before but did not make it into v3.6-rc2."
* tag 'fixes-3.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits)
ARM: ux500: don't select LEDS_GPIO for snowball
ARM: imx: build i.MX6 functions only when needed
ARM: imx: select CPU_FREQ_TABLE when needed
ARM: imx: fix ksz9021rn_phy_fixup
ARM: imx: build pm-imx5 code only when PM is enabled
ARM: omap: allow building omap44xx without SMP
ARM: dts: imx51-babbage: fix esdhc cd/wp properties
ARM: imx6: spin the cpu until hardware takes it down
ARM: ux500: Ensure probing of Audio devices when Device Tree is enabled
ARM: ux500: Fix merge error, no matching driver name for 'snd_soc_u8500'
ARM i.MX6q: Add virtual 1/3.5 dividers in the LDB clock path
ARM: Kirkwood: fix Makefile.boot
ARM: Kirkwood: Fix iconnect leds
ARM: Orion: Set eth packet size csum offload limit
ARM: mv78xx0: fix win_cfg_base prototype
ARM: OMAP: dmtimers: Fix locking issue in omap_dm_timer_request*()
ARM: mmp: fix potential NULL dereference
ARM: OMAP4: Register the OPP table only for 4430 device
cpufreq: OMAP: Handle missing frequency table on SMP systems
ARM: OMAP4: sleep: Save the complete used register stack frame
...
Linus Torvalds [Sun, 26 Aug 2012 00:31:59 +0000 (17:31 -0700)]
Merge tag 'stable/for-linus-3.6-rc3-tag' of git://git./linux/kernel/git/konrad/xen
Pull three xen bug-fixes from Konrad Rzeszutek Wilk:
- Revert the kexec fix which caused on non-kexec shutdowns a race.
- Reuse existing P2M leafs - instead of requiring to allocate a large
area of bootup virtual address estate.
- Fix a one-off error when adding PFNs for balloon pages.
* tag 'stable/for-linus-3.6-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/setup: Fix one-off error when adding for-balloon PFNs to the P2M.
xen/p2m: Reuse existing P2M leafs if they are filled with 1:1 PFNs or INVALID.
Revert "xen PVonHVM: move shared_info to MMIO before kexec"
Linus Torvalds [Sun, 26 Aug 2012 00:30:18 +0000 (17:30 -0700)]
Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc
Pull powerpc fixes from Benjamin Herrenschmidt:
"I meant to sent that earlier but got swamped with other things, so
here are some powerpc fixes for 3.6. A few regression fixes and some
bug fixes that I deemed should still make it.
There's a FSL update from Kumar with a bunch of defconfig updates
along with a few embedded fixes.
I also reverted my g5_defconfig update that I merged earlier as it was
completely busted, not too sure what happened there, I'll do a new one
later."
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
Revert "powerpc: Update g5_defconfig"
powerpc/perf: Use pmc_overflow() to detect rolled back events
powerpc: Fix VMX in interrupt check in POWER7 copy loops
powerpc: POWER7 copy_to_user/copy_from_user patch applied twice
powerpc: Fix personality handling in ppc64_personality()
powerpc/dma-iommu: Fix IOMMU window check
powerpc: Remove unnecessary ifdefs
powerpc/kgdb: Restore current_thread_info properly
powerpc/kgdb: Bail out of KGDB when we've been triggered
powerpc/kgdb: Do not set kgdb_single_step on ppc
powerpc/mpic_msgr: Add missing includes
powerpc: Fix null pointer deref in perf hardware breakpoints
powerpc: Fixup whitespace in xmon
powerpc: Fix xmon dl command for new printk implementation
powerpc/fsl: fix "Failed to mount /dev: No such device" errors
powerpc/fsl: update defconfigs
booke/wdt: some ioctls do not return values properly
powerpc/p4080ds: dts - add usb controller version info and port0
powerpc/85xx: mpc85xx_defconfig - add VIA PATA support for MPC85xxCDS
powerpc/fsl-pci: Only scan PCI bus if configured as a host
Linus Torvalds [Sun, 26 Aug 2012 00:27:17 +0000 (17:27 -0700)]
Merge git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Marcelo Tosatti.
* git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86 emulator: use stack size attribute to mask rsp in stack ops
KVM: MMU: Fix mmu_shrink() so that it can free mmu pages as intended
ppc: e500_tlb memset clears nothing
KVM: PPC: Add cache flush on page map
KVM: PPC: Book3S HV: Fix incorrect branch in H_CEDE code
KVM: x86: update KVM_SAVE_MSRS_BEGIN to correct value
Linus Torvalds [Sat, 25 Aug 2012 18:47:06 +0000 (11:47 -0700)]
Merge tag 'for-linus-v3.6-rc4' of git://oss.sgi.com/xfs/xfs
Pull xfs bugfixes from Ben Myers:
- fix uninitialised variable in xfs_rtbuf_get()
- unlock the AGI buffer when looping in xfs_dialloc
- check for possible overflow in xfs_ioc_trim
* tag 'for-linus-v3.6-rc4' of git://oss.sgi.com/xfs/xfs:
xfs: check for possible overflow in xfs_ioc_trim
xfs: unlock the AGI buffer when looping in xfs_dialloc
xfs: fix uninitialised variable in xfs_rtbuf_get()
Linus Torvalds [Sat, 25 Aug 2012 18:45:04 +0000 (11:45 -0700)]
Merge branch 'upstream' of git://git.linux-mips.org/ralf/upstream-linus
Pull MIPS fixes from Ralf Baechle:
"Random fixes across the MIPS tree. The two hotspots are several bugs
in the module loader and the ath79 SOC support; also noteworthy is the
restructuring of the code to synchronize CPU timers across CPUs on
startup; the old code recently ceased to work due to unrelated
changes.
All except one of these patches have sat for a significant time in
linux-next for testing."
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: pci-ar724x: avoid data bus error due to a missing PCIe module
MIPS: Malta: Delete duplicate PCI fixup.
MIPS: ath79: don't hardcode the unavailability of the DSP ASE
MIPS: Synchronize MIPS count one CPU at a time
MIPS: BCM63xx: Fix SPI message control register handling for BCM6338/6348.
MIPS: Module: Deal with malformed HI16/LO16 relocation sequences.
MIPS: Fix race condition in module relocation code.
MIPS: Fix memory leak in error path of HI16/LO16 relocation handling.
MIPS: MTX-1: Add udelay to mtx1_pci_idsel
MIPS: ath79: select HAVE_CLK
MIPS: ath79: Use correct IRQ number for the OHCI controller on AR7240
MIPS: ath79: Fix number of GPIO lines for AR724[12]
MIPS: Octeon: Fix broken interrupt controller code.
Linus Torvalds [Sat, 25 Aug 2012 18:43:41 +0000 (11:43 -0700)]
Merge branch 'for-3.6' of git://linux-nfs.org/~bfields/linux
Pull nfsd bugfixes from J. Bruce Fields:
"Particular thanks to Michael Tokarev, Malahal Naineni, and Jamie
Heilman for their testing and debugging help."
* 'for-3.6' of git://linux-nfs.org/~bfields/linux:
svcrpc: fix svc_xprt_enqueue/svc_recv busy-looping
svcrpc: sends on closed socket should stop immediately
svcrpc: fix BUG() in svc_tcp_clear_pages
nfsd4: fix security flavor of NFSv4.0 callback
Linus Torvalds [Sat, 25 Aug 2012 18:36:43 +0000 (11:36 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block-related fixes from Jens Axboe:
- Improvements to the buffered and direct write IO plugging from
Fengguang.
- Abstract out the mapping of a bio in a request, and use that to
provide a blk_bio_map_sg() helper. Useful for mapping just a bio
instead of a full request.
- Regression fix from Hugh, fixing up a patch that went into the
previous release cycle (and marked stable, too) attempting to prevent
a loop in __getblk_slow().
- Updates to discard requests, fixing up the sizing and how we align
them. Also a change to disallow merging of discard requests, since
that doesn't really work properly yet.
- A few drbd fixes.
- Documentation updates.
* 'for-linus' of git://git.kernel.dk/linux-block:
block: replace __getblk_slow misfix by grow_dev_page fix
drbd: Write all pages of the bitmap after an online resize
drbd: Finish requests that completed while IO was frozen
drbd: fix drbd wire compatibility for empty flushes
Documentation: update tunable options in block/cfq-iosched.txt
Documentation: update tunable options in block/cfq-iosched.txt
Documentation: update missing index files in block/00-INDEX
block: move down direct IO plugging
block: remove plugging at buffered write time
block: disable discard request merge temporarily
bio: Fix potential memory leak in bio_find_or_create_slab()
block: Don't use static to define "void *p" in show_partition_start()
block: Add blk_bio_map_sg() helper
block: Introduce __blk_segment_map_sg() helper
fs/block-dev.c:fix performance regression in O_DIRECT writes to md block devices
block: split discard into aligned requests
block: reorganize rounding of max_discard_sectors
Linus Torvalds [Sat, 25 Aug 2012 17:28:19 +0000 (10:28 -0700)]
Merge tag 'upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev
Pull libata fixes from Jeff Garzik:
- libata-acpi regression fix
- additional or corrected drive quirks for ata_blacklist
- Kconfig text tweaking
- new PCI IDs
- pata_atiixp: quirk for MSI motherboard
- export ahci_dev_classify for an ahci_platform driver
* tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
libata: Add a space to " 2GB ATA Flash Disk" DMA blacklist entry
[libata] new quirk, lift bridge limits for Buffalo DriveStation Quattro
[libata] Kconfig: Elaborate that SFF is meant for legacy and PATA stuff
[libata] acpi: call ata_acpi_gtm during ata port init time
ata_piix: Add Device IDs for Intel Lynx Point-LP PCH
ahci: Add Device IDs for Intel Lynx Point-LP PCH
pata_atiixp: override cable detection on MSI E350DM-E33
ahci: un-staticize ahci_dev_classify
Prarit Bhargava [Thu, 23 Aug 2012 19:11:52 +0000 (15:11 -0400)]
libata: Add a space to " 2GB ATA Flash Disk" DMA blacklist entry
commit
d70e551c8e1ecb6f20422f8db6bfe6a0049edcb8, Add " 2GB ATA Flash
Disk"/"ADMA428M" to DMA blacklist, should have added a space before 2GB.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Benjamin Herrenschmidt [Fri, 24 Aug 2012 10:55:55 +0000 (20:55 +1000)]
Revert "powerpc: Update g5_defconfig"
This reverts commit
b1acf1bb544cf28c1f4be0a45620fa899c74b7e9.
Something went horribly wrong when I did savedefconfig, not sure what,
but what's in there is busted so let's revert it.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Sukadev Bhattiprolu [Tue, 7 Aug 2012 15:07:19 +0000 (15:07 +0000)]
powerpc/perf: Use pmc_overflow() to detect rolled back events
For certain speculative events on Power7, 'perf stat' reports far higher
event count than 'perf record' for the same event.
As described in following commit, a performance monitor exception is raised
even when the the performance events are rolled back.
commit
0837e3242c73566fc1c0196b4ec61779c25ffc93
Author: Anton Blanchard <anton@samba.org>
Date: Wed Mar 9 14:38:42 2011 +1100
perf_event_interrupt() records an event only when an overflow occurs. But
this check for overflow is a simple 'if (val < 0)'.
Because the events are rolled back, this check for overflow fails and the
event is not recorded. perf_event_interrupt() later uses pmc_overflow() to
detect the overflow and resets the counters and the events are lost completely.
To properly detect the overflow of rolled back events, use pmc_overflow()
even when recording events.
To reproduce:
$ cat strcpy.c
#include <stdio.h>
#include <string.h>
main()
{
char buf[256];
alarm(5);
while(1)
strcpy(buf, "string1");
}
$ perf record -e r20014 ./strcpy
$ perf report -n > report.1
$ perf stat -e r20014 > report.2
# Compare report.1 and report.2
Reported-by: Maynard Johnson <mpjohn@us.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Anton Blanchard [Tue, 7 Aug 2012 17:51:41 +0000 (17:51 +0000)]
powerpc: Fix VMX in interrupt check in POWER7 copy loops
The enhanced prefetch hint patches corrupt the condition register
that was used to check if we are in interrupt. Fix this by using cr1.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Anton Blanchard [Tue, 7 Aug 2012 17:50:46 +0000 (17:50 +0000)]
powerpc: POWER7 copy_to_user/copy_from_user patch applied twice
"powerpc: Use enhanced touch instructions in POWER7
copy_to_user/copy_from_user" was applied twice. Remove one.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Jiri Kosina [Mon, 13 Aug 2012 03:18:28 +0000 (03:18 +0000)]
powerpc: Fix personality handling in ppc64_personality()
Directly comparing current->personality against PER_LINUX32 doesn't work
in cases when any of the personality flags stored in the top three bytes
are used.
Directly forcefully setting personality to PER_LINUX32 or PER_LINUX
discards any flags stored in the top three bytes
Use personality() macro to compare only PER_MASK bytes and make sure that
we are setting only the bits that should be set, instead of overwriting
the whole value.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Aaro Koskinen [Sat, 18 Aug 2012 07:34:15 +0000 (07:34 +0000)]
powerpc/dma-iommu: Fix IOMMU window check
Checking for device mask to cover the whole IOMMU table is too strict.
IOMMU allocators should handle mask constraint properly for each
allocation.
The patch enables to use old AirPort Extreme cards on PowerMacs with
more than 1GB of memory; without the patch the driver init fails with:
b43-pci-bridge 0001:01:01.0: Warning: IOMMU window too big for device mask
b43-pci-bridge 0001:01:01.0: mask: 0x3fffffff, table end: 0x80000000
b43-phy0 ERROR: The machine/kernel does not support the required 30-bit DMA mask
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Michael Neuling [Tue, 21 Aug 2012 21:22:22 +0000 (21:22 +0000)]
powerpc: Remove unnecessary ifdefs
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Tiejun Chen [Wed, 22 Aug 2012 16:10:20 +0000 (16:10 +0000)]
powerpc/kgdb: Restore current_thread_info properly
For powerpc BooKE and e200, singlestep is handled on the critical/dbg
exception stack. This causes current_thread_info() to fail for kgdb
internal, so previously We work around this issue by copying
the thread_info from the kernel stack before calling kgdb_handle_exception,
and copying it back afterwards.
But actually we don't do this properly. We should backup current_thread_info
then restore that when exit.
Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Tiejun Chen [Wed, 22 Aug 2012 16:10:19 +0000 (16:10 +0000)]
powerpc/kgdb: Bail out of KGDB when we've been triggered
We need to skip a breakpoint exception when it occurs after
a breakpoint has already been removed.
Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Tiejun Chen [Wed, 22 Aug 2012 16:10:18 +0000 (16:10 +0000)]
powerpc/kgdb: Do not set kgdb_single_step on ppc
The kgdb_single_step flag has the possibility to indefinitely
hang the system on an SMP system.
The x86 arch have the same problem, and that problem was fixed by
commit
8097551d9ab9b9e3630(kgdb,x86: do not set kgdb_single_step
on x86). This patch does the same behaviors as x86's patch.
Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Scott Wood [Wed, 22 Aug 2012 15:35:47 +0000 (15:35 +0000)]
powerpc/mpic_msgr: Add missing includes
Add several #includes that mpic_msgr relies on being pulled implicitly,
which only happens on certain configs.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Cc: Meador Inge <meador_inge@mentor.com>
Cc: Jia Hongtao <B38951@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Michael Neuling [Wed, 22 Aug 2012 20:30:43 +0000 (20:30 +0000)]
powerpc: Fix null pointer deref in perf hardware breakpoints
Currently if you are doing a global perf recording with hardware
breakpoints (ie perf record -e mem:0xdeadbeef -a), you can oops with:
Faulting instruction address: 0xc000000000738890
cpu 0xc: Vector: 300 (Data Access) at [
c0000003f76af8d0]
pc:
c000000000738890: .hw_breakpoint_handler+0xa0/0x1e0
lr:
c000000000738830: .hw_breakpoint_handler+0x40/0x1e0
sp:
c0000003f76afb50
msr:
8000000000001032
dar: 6f0
dsisr:
42000000
current = 0xc0000003f765ac00
paca = 0xc00000000f262a00 softe: 0 irq_happened: 0x01
pid = 6810, comm = loop-read
enter ? for help
[
c0000003f76afbe0]
c00000000073cd04 .notifier_call_chain.isra.0+0x84/0xe0
[
c0000003f76afc80]
c00000000073cdbc .notify_die+0x3c/0x60
[
c0000003f76afd20]
c0000000000139f0 .do_dabr+0x40/0xf0
[
c0000003f76afe30]
c000000000005a9c handle_dabr_fault+0x14/0x48
--- Exception: 300 (Data Access) at
0000000010000480
SP (
ff8679e0) is in userspace
This is because we don't check to see if the break point is associated
with task before we deference the task_struct pointer.
This changes the update to use current.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Michael Ellerman [Thu, 23 Aug 2012 22:09:13 +0000 (22:09 +0000)]
powerpc: Fixup whitespace in xmon
There are a few whitespace goolies in xmon.c, some of them appear to
be my fault. Fix them all in one go.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Michael Ellerman [Thu, 23 Aug 2012 22:09:12 +0000 (22:09 +0000)]
powerpc: Fix xmon dl command for new printk implementation
Since the printk internals were reworked the xmon 'dl' command which
dumps the content of __log_buf has stopped working.
It is now a structured buffer, so just dumping it doesn't really work.
Use the helpers added for kgdb to print out the content.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Alan Cox [Fri, 13 Jul 2012 14:27:29 +0000 (15:27 +0100)]
gma500: Fix frequency detection
If we have a 266MHz part we set core_freq to 0 in several spots
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
Jani Nikula [Fri, 24 Aug 2012 06:42:44 +0000 (09:42 +0300)]
gma500: remove references to drm_display_info raw_edid field
Another reference to raw_edid field of struct drm_display_info was added in
gma500 while the whole field was being removed, causing build
failure. Remove the hopefully last references to raw_edid.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
Linus Torvalds [Fri, 24 Aug 2012 04:58:04 +0000 (21:58 -0700)]
Merge git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This push fixes a build error on 32-bit archs in the hifn driver as
well as a potential deadlock in the caam driver."
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: caam - fix possible deadlock condition
crypto: hifn_795x - fix 64bit division and undefined __divdi3 on 32bit archs
Linus Torvalds [Fri, 24 Aug 2012 04:56:22 +0000 (21:56 -0700)]
Merge branch 'for_linus' of git://git./linux/kernel/git/jack/linux-fs
Pull UDF, ext3 & reiserfs fixes from Jan Kara:
"A couple of fixes (udf, reiserfs, ext3) that accumulated over my
vacation."
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: fix retun value on error path in udf_load_logicalvol
jbd: don't write superblock when unmounting an ro filesystem
reiserfs: fix deadlocks with quotas
quota: Move down dqptr_sem read after initializing default warn[] type at __dquot_alloc_space().
UDF: During mount free lvid_bh before rescanning with different blocksize
udf: fix udf_setsize() for file data in ICB
Linus Torvalds [Fri, 24 Aug 2012 04:50:40 +0000 (21:50 -0700)]
Merge tag 'upstream-3.6-rc3' of git://git.infradead.org/linux-ubifs
Pull UBIFS fixes from Artem Bityutskiy:
- Fix crash on error which prevents emulated power-cut testing.
- Fix log reply regression introduced in 3.6-rc1.
- Fix UBIFS complaints about too small debug buffer size which.
- Fix error message spelling, and remove incorrect commentary.
* tag 'upstream-3.6-rc3' of git://git.infradead.org/linux-ubifs:
UBIFS: fix error messages spelling
UBIFS: fix complaints about too small debug buffer size
UBIFS: fix replay regression
UBIFS: fix crash on error path
UBIFS: remove stale commentary
Linus Torvalds [Fri, 24 Aug 2012 04:49:56 +0000 (21:49 -0700)]
Merge git://git./linux/kernel/git/davem/ide
Pull IDE power management bugfix from David S. Miller.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide:
ide: fix generic_ide_suspend/resume Oops
Linus Torvalds [Fri, 24 Aug 2012 04:48:41 +0000 (21:48 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"This tree contains misc fixlets: a perf script python binding fix, a
uprobes fix and a syscall tracing fix."
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tools: Add missing files to build the python binding
uprobes: Fix mmap_region()'s mm->mm_rb corruption if uprobe_mmap() fails
tracing/syscalls: Fix perf syscall tracing when syscall_nr == -1
Linus Torvalds [Fri, 24 Aug 2012 04:47:54 +0000 (21:47 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"This tree contains assorted fixlets: an alternatives patching crash
fix, an irq migration/hotplug interaction fix, a fix for large AMD
microcode images and a comment fixlet."
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, microcode, AMD: Fix broken ucode patch size check
x86/alternatives: Fix p6 nops on non-modular kernels
x86/fixup_irq: Use cpu_online_mask instead of cpu_all_mask
x86/spinlocks: Fix comment in spinlock.h
Linus Torvalds [Fri, 24 Aug 2012 04:46:57 +0000 (21:46 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"Mostly small fixes for the fallout of the timekeeping overhaul in 3.6
along with stable fixes to address an accumulation problem and missing
sanity checks for RTC readouts and user space provided values."
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Avoid making adjustments if we haven't accumulated anything
time: Avoid potential shift overflow with large shift values
time: Fix casting issue in timekeeping_forward_now
time: Ensure we normalize the timekeeper in tk_xtime_add
time: Improve sanity checking of timekeeping inputs
Linus Torvalds [Fri, 24 Aug 2012 04:45:54 +0000 (21:45 -0700)]
Merge branch 'upstream-fixes' of git://git./linux/kernel/git/jikos/hid
Pull HID fix from Jiri Kosina:
"Fix for one particular device not being properly claimed by
hid-multitouch driver"
* 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: Remove QUANTA from special drivers list
Dave Airlie [Fri, 24 Aug 2012 03:53:49 +0000 (13:53 +1000)]
gma500: fix incorrect declaration.
this header was incorrect, caused a build failure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Sachin Kamat [Wed, 1 Aug 2012 11:45:32 +0000 (17:15 +0530)]
drm: Add misssing static storage class specifier in drm_fb_helper.c file
Fixes the following sparse warning:
drivers/gpu/drm/drm_fb_helper.c:239:6: warning:
symbol 'drm_fb_helper_force_kernel_mode' was not declared. Should it be static?
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Sachin Kamat [Wed, 1 Aug 2012 11:45:31 +0000 (17:15 +0530)]
drm: Add missing static storage class specifier in drm_irq.c file
Fixes the following sparse warning:
drivers/gpu/drm/drm_irq.c:1239:6:
warning: symbol 'drm_handle_vblank_events' was not declared. Should it be static?
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Mark Brown [Tue, 7 Aug 2012 11:14:14 +0000 (11:14 +0000)]
drm/i2c/ch7006: Convert to dev_pm_ops
The I2C specific suspend and resume functions have been deprecated and
printing a warning on boot for over a year, dev_pm_ops should be used
instead so convert to that.
Also remove the suspend function since all it does is log.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Sachin Kamat [Fri, 10 Aug 2012 05:30:25 +0000 (05:30 +0000)]
drm/usb: select USB_SUPPORT in Kconfig
DRM_USB selects USB. However, USB depends on USB_SUPPORT and USB_ARCH_HAS_HCD.
Thus, selecting USB_SUPPORT in Kconfig avoids the following warning
(detected when DisplayLink was selected using exynos4_defconfig):
warning: (MOUSE_APPLETOUCH && MOUSE_BCM5974 && MOUSE_SYNAPTICS_USB && JOYSTICK_XPAD && TABLET_USB_ACECAD && TABLET_USB_AIPTEK && TABLET_USB_HANWANG && TABLET_USB_KBTAB && TABLET_USB_WACOM && TOUCHSCREEN_USB_COMPOSITE && INPUT_ATI_REMOTE2 && INPUT_KEYSPAN_REMOTE && INPUT_POWERMATE && INPUT_YEALINK && INPUT_CM109 && RC_ATI_REMOTE && IR_IMON && IR_MCEUSB && IR_REDRAT3 && IR_STREAMZAP && IR_IGUANA && DRM_USB) selects USB which has unmet direct dependencies (USB_SUPPORT && USB_ARCH_HAS_HCD)
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jani Nikula [Wed, 15 Aug 2012 09:34:43 +0000 (09:34 +0000)]
gma500: remove an unreachable return statement
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Forest Bond [Mon, 13 Aug 2012 16:29:04 +0000 (16:29 +0000)]
gma500: psb_intel_crtc: Drop crtc_enable flag.
This is set when setting DPMS on and off, but it isn't checked anywhere,
so just remove it.
Signed-off-by: Forest Bond <forest.bond@rapidrollout.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Forest Bond [Mon, 13 Aug 2012 16:27:09 +0000 (16:27 +0000)]
gma500: Fix comment mispelling in cdv_intel_limits definition.
Signed-off-by: Forest Bond <forest.bond@rapidrollout.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Huacai Chen [Sat, 11 Aug 2012 09:32:18 +0000 (09:32 +0000)]
drm: Define SAREA_MAX for Loongson (PageSize = 16KB).
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Hongliang Tao <taohl@lemote.com>
Signed-off-by: Hua Yan <yanh@lemote.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Huacai Chen [Sat, 11 Aug 2012 09:32:17 +0000 (09:32 +0000)]
drm: Handle io prot correctly for MIPS.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Hongliang Tao <taohl@lemote.com>
Signed-off-by: Hua Yan <yanh@lemote.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jani Nikula [Wed, 15 Aug 2012 09:32:39 +0000 (09:32 +0000)]
drm: remove the raw_edid field from struct drm_display_info
Neither the drm core nor any of the drivers really need the raw_edid field
of struct drm_display_info for anything. Instead of being useful, it
creates confusion about who is responsible for freeing the memory it points
to and setting the field to NULL afterwards, leading to memory leaks and
dangling pointers.
Remove the raw_edid field, and fix drivers as necessary.
Reported-by: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jani Nikula [Wed, 15 Aug 2012 09:32:37 +0000 (09:32 +0000)]
drm/ast: fix EDID memory leak
The EDID returned by drm_get_edid() was never freed.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jani Nikula [Wed, 15 Aug 2012 09:32:36 +0000 (09:32 +0000)]
drm/i915: fix EDID memory leak in SDVO
The EDID returned by drm_get_edid() was never freed.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Maarten Lankhorst [Mon, 20 Aug 2012 13:54:34 +0000 (13:54 +0000)]
drm/mgag200: remove unused validate_sequence
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Maarten Lankhorst [Mon, 20 Aug 2012 13:54:28 +0000 (13:54 +0000)]
drm/cirrus: Remove unused validate_sequence
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Maarten Lankhorst [Mon, 20 Aug 2012 13:54:21 +0000 (13:54 +0000)]
drm/ast: remove unused validate_sequence
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alan Cox [Wed, 22 Aug 2012 12:00:28 +0000 (12:00 +0000)]
gma500/cdv: Fix call to cdv_intel_dp_set_m_n
We should be making this call not praying that the values are right.
In addition as noted by Josiah Standing we should be calling this
for eDP as well.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Laurent Pinchart [Tue, 24 Jul 2012 15:47:34 +0000 (16:47 +0100)]
drm: gma500: Kill the GEM glue layer
The private gem_create_mmap_offset() function is now implemented in the
DRM core as drm_gem_create_mmap_offset(). Use it and kill the private
copy.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Zhao Yakui [Wed, 8 Aug 2012 13:57:01 +0000 (13:57 +0000)]
gma500: Disable the clock gating of display controller to make DP/eDP work well
I don't know why the DP/eDP is affected by the clock gating. But the test
shows that it really fixes the DP/eDP clock issue during enabling DP/eDP.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
[Updated to only apply the workaround if the device has DP. We don't want
to do this on netbooks]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Zhao Yakui [Wed, 8 Aug 2012 13:55:55 +0000 (13:55 +0000)]
gma500/cdv: Add eDP support
Introduce the eDP support into the driver.
This has been reworked a bit because kernel driver proper uses encoder/connectors
while the legacy Intel driver uses the old output stuff.
It also diverges on the backlight handling. The legacy Intel driver adds a panel
abstraction based upon the i915 one. It's only really used for backlight bits
and we have a perfectly good backlight abstraction which can extend instead.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
[ported to upstream driver, redid backlight abstraction]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alan Cox [Wed, 8 Aug 2012 13:55:26 +0000 (13:55 +0000)]
gma500/cdv: enable the DisplayPort support
This will give the basic support only
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alan Cox [Wed, 8 Aug 2012 13:55:03 +0000 (13:55 +0000)]
gma500/cdv: sync up and add the displayport code to the build
This is mostly just aligning bits of behaviour
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alan Cox [Wed, 8 Aug 2012 13:54:41 +0000 (13:54 +0000)]
gma500/cdv: add the bits that don't need the new code
Based on bits from Yakui <yakui.zhao@intel.com>
We can import various little bits of code before we plumb it all
in and hopefully this way catch any regressions more easily.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alan Cox [Wed, 8 Aug 2012 13:54:15 +0000 (13:54 +0000)]
gma500: Add the support of display port on CDV
Import the pieces we need in order to do DisplayPort. Don't wire them
up yet as there is work to do to integrate them.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Zhao Yakui [Wed, 8 Aug 2012 13:53:48 +0000 (13:53 +0000)]
gma500: Program the DPLL lane based on the selected digitial port
Based on the spec, the CRT output doesn't use the lane. And the HDMI B output
uses the Lane0/1 while the HDMI C output uses the Lane 2/3. But currently
it will program all the four lanes for the CRT/HDMI.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
[Ported to the in-kernel driver]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Zhao Yakui [Wed, 8 Aug 2012 13:53:15 +0000 (13:53 +0000)]
gma500: Fix incorrect SR issue when disabling CRTC already in disabled state
Currently when trying to call the DPMS off again for one CRTC with DPMS off,
it will firstly disable the SR and can't enable it again because of the
incorrect check/logic. In such case the self refresh is still disabled
although one CRTC pipe is active. This is wrong.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
[Ported to in kernel driver]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Thu, 23 Aug 2012 23:24:49 +0000 (09:24 +1000)]
Merge branch 'drm-doc' of git://linuxtv.org/pinchartl/fbdev into drm-next
* 'drm-doc' of git://linuxtv.org/pinchartl/fbdev:
Documentation: DocBook DRM framework documentation
Tomas Racek [Tue, 14 Aug 2012 08:35:04 +0000 (10:35 +0200)]
xfs: check for possible overflow in xfs_ioc_trim
If range.start or range.minlen is bigger than filesystem size, return
invalid value error. This fixes possible overflow in BTOBB macro when
passed value was nearly ULLONG_MAX.
Signed-off-by: Tomas Racek <tracek@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Christoph Hellwig [Tue, 7 Aug 2012 06:02:02 +0000 (02:02 -0400)]
xfs: unlock the AGI buffer when looping in xfs_dialloc
Also update some commens in the area to make the code easier to read.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Dave Chinner [Tue, 31 Jul 2012 04:55:51 +0000 (14:55 +1000)]
xfs: fix uninitialised variable in xfs_rtbuf_get()
Results in this assert failure in generic/090:
XFS: Assertion failed: *nmap >= 1, file: fs/xfs/xfs_bmap.c, line: 4363
.....
Call Trace:
[<
ffffffff814680db>] xfs_bmapi_read+0x6b/0x370
[<
ffffffff814b64b2>] xfs_rtbuf_get+0x42/0x130
[<
ffffffff814b6f09>] xfs_rtget_summary+0x89/0x120
[<
ffffffff814b7bfe>] xfs_rtallocate_extent_size+0xce/0x340
[<
ffffffff814b89f0>] xfs_rtallocate_extent+0x240/0x290
[<
ffffffff81462c1a>] xfs_bmap_rtalloc+0x1ba/0x340
[<
ffffffff81463a65>] xfs_bmap_alloc+0x35/0x40
[<
ffffffff8146f111>] xfs_bmapi_allocate+0xf1/0x350
[<
ffffffff8146f9de>] xfs_bmapi_write+0x66e/0xa60
[<
ffffffff8144538a>] xfs_iomap_write_direct+0x22a/0x3f0
[<
ffffffff8143707b>] __xfs_get_blocks+0x38b/0x5d0
[<
ffffffff814372d4>] xfs_get_blocks_direct+0x14/0x20
[<
ffffffff811b0081>] do_blockdev_direct_IO+0xf71/0x1eb0
[<
ffffffff811b1015>] __blockdev_direct_IO+0x55/0x60
[<
ffffffff814355ca>] xfs_vm_direct_IO+0x11a/0x1e0
[<
ffffffff8112d617>] generic_file_direct_write+0xd7/0x1b0
[<
ffffffff8143e16c>] xfs_file_dio_aio_write+0x13c/0x320
[<
ffffffff8143e6f2>] xfs_file_aio_write+0x1c2/0x1d0
[<
ffffffff81174a07>] do_sync_write+0xa7/0xe0
[<
ffffffff81175288>] vfs_write+0xa8/0x160
[<
ffffffff81175702>] sys_pwrite64+0x92/0xb0
[<
ffffffff81b68f69>] system_call_fastpath+0x16/0x1b
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Kim Phillips [Wed, 22 Aug 2012 18:43:30 +0000 (13:43 -0500)]
powerpc/fsl: fix "Failed to mount /dev: No such device" errors
Yocto (Built by Poky 7.0) 1.2 root filesystems fail to boot,
at least over nfs, with:
Failed to mount /dev: No such device
Configuring DEVTMPFS fixes it.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kim Phillips [Wed, 22 Aug 2012 18:43:24 +0000 (13:43 -0500)]
powerpc/fsl: update defconfigs
run make savedefconfig on fsl defconfigs.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Arnd Bergmann [Thu, 23 Aug 2012 15:30:54 +0000 (17:30 +0200)]
Merge branch 'randconfig/mach' into fixes
Small platform specific bug fixes for problems found in randconfig builds.
* randconfig/mach:
ARM: ux500: don't select LEDS_GPIO for snowball
ARM: imx: build i.MX6 functions only when needed
ARM: imx: select CPU_FREQ_TABLE when needed
ARM: imx: fix ksz9021rn_phy_fixup
ARM: imx: build pm-imx5 code only when PM is enabled
ARM: omap: allow building omap44xx without SMP
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Wed, 15 Aug 2012 20:34:48 +0000 (20:34 +0000)]
ARM: ux500: don't select LEDS_GPIO for snowball
Using 'select' in Kconfig is hard, a platform cannot just
enable a driver without also making sure that its subsystem
is there. Also, there is no actual code dependency between
the platform and the gpio leds driver.
Without this patch, building without LEDS_CLASS esults in:
drivers/built-in.o: In function `create_gpio_led.part.2':
governor_userspace.c:(.devinit.text+0x5a58): undefined reference to `led_classdev_register'
drivers/built-in.o: In function `gpio_led_remove':
governor_userspace.c:(.devexit.text+0x6b8): undefined reference to `led_classdev_unregister'
This reverts
8733f53c6 "ARM: ux500: Kconfig: Compile in leds-gpio
support for Snowball" that introduced the regression and did not
provide a helpful explanation.
In order to leave the GPIO LED code still present in normal
builds, this also enables the symbol in u8500_defconfig, in addition
to the other LED drivers that are already selected there.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Lee Jones <lee.jones@linaro.org>
Arnd Bergmann [Fri, 17 Aug 2012 00:16:08 +0000 (00:16 +0000)]
ARM: imx: build i.MX6 functions only when needed
The head-v7.S contains a call to the generic cpu_suspend function,
which is only available when selected by the i.MX6 code. As
pointed out by Shawn Guo, i.MX5 does not actually use any
functions defined in head-v7.S. It is also needed only for
the i.MX6 power management code and for the SMP code, so
we can restrict building this file to situations in which
at least one of those two is present.
Finally, other platforms with a similar file call it headsmp.S,
so we can rename it to the same for consistency.
Without this patch, building imx5 standalone results in:
arch/arm/mach-imx/built-in.o: In function `v7_cpu_resume':
arch/arm/mach-imx/head-v7.S:104: undefined reference to `cpu_resume'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Eric Miao <eric.miao@linaro.org>
Cc: stable@vger.kernel.org
Arnd Bergmann [Thu, 16 Aug 2012 10:40:40 +0000 (10:40 +0000)]
ARM: imx: select CPU_FREQ_TABLE when needed
The i.MX cpufreq implementation uses the CPU_FREQ_TABLE helpers,
so it needs to select that code to be built. This problem has
apparently existed since the i.MX cpufreq code was first merged
in v2.6.37.
Building IMX without CPU_FREQ_TABLE results in:
arch/arm/plat-mxc/built-in.o: In function `mxc_cpufreq_exit':
arch/arm/plat-mxc/cpufreq.c:173: undefined reference to `cpufreq_frequency_table_put_attr'
arch/arm/plat-mxc/built-in.o: In function `mxc_set_target':
arch/arm/plat-mxc/cpufreq.c:84: undefined reference to `cpufreq_frequency_table_target'
arch/arm/plat-mxc/built-in.o: In function `mxc_verify_speed':
arch/arm/plat-mxc/cpufreq.c:65: undefined reference to `cpufreq_frequency_table_verify'
arch/arm/plat-mxc/built-in.o: In function `mxc_cpufreq_init':
arch/arm/plat-mxc/cpufreq.c:154: undefined reference to `cpufreq_frequency_table_cpuinfo'
arch/arm/plat-mxc/cpufreq.c:162: undefined reference to `cpufreq_frequency_table_get_attr'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Yong Shen <yong.shen@linaro.org>
Cc: stable@vger.kernel.org
Arnd Bergmann [Thu, 16 Aug 2012 07:42:50 +0000 (07:42 +0000)]
ARM: imx: fix ksz9021rn_phy_fixup
The ksz9021rn_phy_fixup and mx6q_sabrelite functions try to
set up an ethernet phy if they can. They do check whether
phylib is enabled, but unfortunately the functions can only
be called from platform code if phylib is builtin, not
if it is a module
Without this patch, building with a modular phylib results in:
arch/arm/mach-imx/mach-imx6q.c: In function 'imx6q_sabrelite_init':
arch/arm/mach-imx/mach-imx6q.c:120:5: error: 'ksz9021rn_phy_fixup' undeclared (first use in this function)
arch/arm/mach-imx/mach-imx6q.c:120:5: note: each undeclared identifier is reported only once for each function it appears in
The bug was originally reported by Artem Bityutskiy but only
partially fixed in
ef441806 "ARM: imx6q: register phy fixup only when
CONFIG_PHYLIB is enabled".
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Arnd Bergmann [Wed, 15 Aug 2012 21:56:39 +0000 (21:56 +0000)]
ARM: imx: build pm-imx5 code only when PM is enabled
This moves the imx5 pm code out of the list of unconditionally
compiled files for imx5, mirroring what we already do for imx6
and how it was done before the code was move from mach-mx5 to
mach-imx in v3.3.
Without this patch, building with CONFIG_PM disabled results in:
arch/arm/mach-imx/pm-imx5.c:202:116: error: redefinition of 'imx51_pm_init'
arch/arm/mach-imx/include/mach-imx/common.h:154:91: note: previous definition of 'imx51_pm_init' was here
arch/arm/mach-imx/pm-imx5.c:209:116: error: redefinition of 'imx53_pm_init'
arch/arm/mach-imx/include/mach-imx/common.h:155:91: note: previous definition of 'imx53_pm_init' was here
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: stable@vger.kernel.org
Arnd Bergmann [Wed, 15 Aug 2012 20:51:54 +0000 (20:51 +0000)]
ARM: omap: allow building omap44xx without SMP
The new omap4 cpuidle implementation currently requires
ARCH_NEEDS_CPU_IDLE_COUPLED, which only works on SMP.
This patch makes it possible to build a non-SMP kernel
for that platform. This is not normally desired for
end-users but can be useful for testing.
Without this patch, building rand-0y2jSKT results in:
drivers/cpuidle/coupled.c: In function 'cpuidle_coupled_poke':
drivers/cpuidle/coupled.c:317:3: error: implicit declaration of function '__smp_call_function_single' [-Werror=implicit-function-declaration]
It's not clear if this patch is the best solution for
the problem at hand. I have made sure that we can now
build the kernel in all configurations, but that does
not mean it will actually work on an OMAP44xx.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Arnd Bergmann [Thu, 23 Aug 2012 15:06:15 +0000 (17:06 +0200)]
Merge tag 'ux500-fixes-v3.6-rc2' of git://git./linux/kernel/git/linusw/linux-stericsson into fixes
From Linus Walleij <linus.walleij@linaro.org>:
Here are two audio fixes for the ux500 found by Lee Jones.
* tag 'ux500-fixes-v3.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
ARM: ux500: Ensure probing of Audio devices when Device Tree is enabled
ARM: ux500: Fix merge error, no matching driver name for 'snd_soc_u8500'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 23 Aug 2012 15:03:49 +0000 (17:03 +0200)]
Merge branch 'v3.6-samsung-fixes-1' of git://git./linux/kernel/git/kgene/linux-samsung into fixes
From Kukjin Kim <kgene.kim@samsung.com>:
For HDMI, already HDMI support for EXYNOS in mainline kernel is broken
because its configuration moved to platform data but regarding platform
data didn't support yet. And others are for fix warnings.
* 'v3.6-samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: EXYNOS: Set HDMI platform data in Origen board
ARM: EXYNOS: Set HDMI platform data in SMDKV310
ARM: SAMSUNG: Add API to set platform data for s5p-tv driver
ARM: SAMSUNG: Set HDMI platform data for Exynos4x12 SoCs
ARM: Samsung: Make uart_save static in pm.c file
ARM: S3C24XX: Fix s3c2410_dma_enqueue parameters
ARM: S3C24XX: Add missing DMACH_DT_PROP
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 23 Aug 2012 15:02:42 +0000 (17:02 +0200)]
Merge branch 'imx/fixes-for-3.6' of git://git.linaro.org/people/shawnguo/linux-2.6 into fixes
* 'imx/fixes-for-3.6' of git://git.linaro.org/people/shawnguo/linux-2.6:
ARM: dts: imx51-babbage: fix esdhc cd/wp properties
ARM: imx6: spin the cpu until hardware takes it down
ARM i.MX6q: Add virtual 1/3.5 dividers in the LDB clock path
Also updates to Linux 3.6-rc2
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Konrad Rzeszutek Wilk [Fri, 17 Aug 2012 20:43:28 +0000 (16:43 -0400)]
xen/setup: Fix one-off error when adding for-balloon PFNs to the P2M.
When we are finished with return PFNs to the hypervisor, then
populate it back, and also mark the E820 MMIO and E820 gaps
as IDENTITY_FRAMEs, we then call P2M to set areas that can
be used for ballooning. We were off by one, and ended up
over-writting a P2M entry that most likely was an IDENTITY_FRAME.
For example:
1-1 mapping on 40000->40200
1-1 mapping on bc558->bc5ac
1-1 mapping on bc5b4->bc8c5
1-1 mapping on bc8c6->bcb7c
1-1 mapping on bcd00->100000
Released 614 pages of unused memory
Set 277889 page(s) to 1-1 mapping
Populating 40200-40466 pfn range: 614 pages added
=> here we set from 40466 up to bc559 P2M tree to be
INVALID_P2M_ENTRY. We should have done it up to bc558.
The end result is that if anybody is trying to construct
a PTE for PFN bc558 they end up with ~PAGE_PRESENT.
CC: stable@vger.kernel.org
Reported-by-and-Tested-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Gabor Juhos [Thu, 23 Aug 2012 13:35:26 +0000 (15:35 +0200)]
MIPS: pci-ar724x: avoid data bus error due to a missing PCIe module
If the controller has no PCIe module attached, accessing of the device
configuration space causes a data bus error. Avoid this by checking the
status of the PCIe link in advance, and indicate an error if the link
is down.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: stable@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4293/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Shawn Guo [Wed, 22 Aug 2012 13:46:39 +0000 (21:46 +0800)]
ARM: dts: imx51-babbage: fix esdhc cd/wp properties
The binding doc and dts use properties "fsl,{cd,wp}-internal" while
esdhc driver uses "fsl,{cd,wp}-controller". Fix binding doc and dts
to get them match driver code.
Reported-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: <stable@vger.kernel.org>
Acked-by: Chris Ball <cjb@laptop.org>
Shawn Guo [Sat, 18 Aug 2012 06:27:32 +0000 (14:27 +0800)]
ARM: imx6: spin the cpu until hardware takes it down
Though commit 602bf40 (ARM: imx6: exit coherency when shutting down
a cpu) improves the stability of imx6q cpu hotplug a lot, there are
still hangs seen with a more stressful hotplug testing.
It's expected that once imx_enable_cpu(cpu, false) is called, the cpu
will be taken down by hardware immediately, and the code after that
will not get any chance to execute. However, this is not always the
case from the testing. The cpu could possibly be alive for a few
cycles before hardware actually takes it down. So rather than letting
cpu execute some code that could cause a hang in these cycles, let's
make the cpu spin there and wait for hardware to take it down.
Cc: <stable@vger.kernel.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Hugh Dickins [Thu, 23 Aug 2012 10:17:36 +0000 (12:17 +0200)]
block: replace __getblk_slow misfix by grow_dev_page fix
Commit
91f68c89d8f3 ("block: fix infinite loop in __getblk_slow")
is not good: a successful call to grow_buffers() cannot guarantee
that the page won't be reclaimed before the immediate next call to
__find_get_block(), which is why there was always a loop there.
Yesterday I got "EXT4-fs error (device loop0): __ext4_get_inode_loc:3595:
inode #19278: block 664: comm cc1: unable to read itable block" on console,
which pointed to this commit.
I've been trying to bisect for weeks, why kbuild-on-ext4-on-loop-on-tmpfs
sometimes fails from a missing header file, under memory pressure on
ppc G5. I've never seen this on x86, and I've never seen it on 3.5-rc7
itself, despite that commit being in there: bisection pointed to an
irrelevant pinctrl merge, but hard to tell when failure takes between
18 minutes and 38 hours (but so far it's happened quicker on 3.6-rc2).
(I've since found such __ext4_get_inode_loc errors in /var/log/messages
from previous weeks: why the message never appeared on console until
yesterday morning is a mystery for another day.)
Revert
91f68c89d8f3, restoring __getblk_slow() to how it was (plus
a checkpatch nitfix). Simplify the interface between grow_buffers()
and grow_dev_page(), and avoid the infinite loop beyond end of device
by instead checking init_page_buffers()'s end_block there (I presume
that's more efficient than a repeated call to blkdev_max_block()),
returning -ENXIO to __getblk_slow() in that case.
And remove akpm's ten-year-old "__getblk() cannot fail ... weird"
comment, but that is worrying: are all users of __getblk() really
now prepared for a NULL bh beyond end of device, or will some oops??
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: stable@vger.kernel.org # 3.0 3.2 3.4 3.5
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Laurent Pinchart [Thu, 12 Jul 2012 22:57:26 +0000 (00:57 +0200)]
Documentation: DocBook DRM framework documentation
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Clark <rob.clark@linaro.org>
Luca Tettamanti [Tue, 21 Aug 2012 15:36:28 +0000 (17:36 +0200)]
hwmon: (asus_atk0110) Add quirk for Asus M5A78L
The old interface is bugged and reads the wrong sensor when retrieving
the reading for the chassis fan (it reads the CPU sensor); the new
interface works fine.
Reported-by: Göran Uddeborg <goeran@uddeborg.se>
Cc: stable@vger.kernel.org
Tested-by: Göran Uddeborg <goeran@uddeborg.se>
Signed-off-by: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Dave Airlie [Thu, 23 Aug 2012 05:12:44 +0000 (15:12 +1000)]
Merge branch 'for-airlied' of git://people.freedesktop.org/~danvet/drm-intel into drm-next
Daniel writes:
" First -next pull for 3.7. Highlights:
- hsw hdmi improvements (Paulo)
- ips/rps locking rework and cleanups
- rc6 on ilk by default again
- hw context&dp&dpff support for hsw (Ben)
- GET_PARAM_HAS_SEMAPHORES (Chris)
- gen6+ pipe_control improvements (Chris)
- set_cacheing ioctl and assorted support code (Chris)
- cleanups around the busy/idle/pm code (Chris&me)
- flushing_list removal, hopefully for good (Chris)
- read_reg ioctl (Ben)
- support the ns2501 dvo (Thomas Richter)
- avoid the costly gen6+ "missed IRQ" workaround where we don't need a
race-free seqno readback (Chris)
- various bits&pieces, mostly early patches from the modeset rework branch"
* 'for-airlied' of git://people.freedesktop.org/~danvet/drm-intel: (54 commits)
drm/i915: don't grab dev->struct_mutex for userspace forcewak
drm/i915: try harder to find WR PLL clock settings
drm/i915: use the correct encoder type when comparing
drm/i915: Lazily apply the SNB+ seqno w/a
drm/i915: enable rc6 on ilk again
drm/i915: fix up ilk drps/ips locking
drm/i915: DE_PCU_EVENT irq is ilk-only
drm/i915: kill dev_priv->mchdev_lock
drm/i915: move all rps state into dev_priv->rps
drm/i915: use mutex_lock_interruptible for debugfs files
drm/i915: fixup up debugfs rps state handling
drm/i915: properly guard ilk ips state
drm/i915: add parentheses around PIXCLK_GATE definitions
drm/i915: reindent Haswell register definitions
drm/i915: completely reset the value of DDI_FUNC_CTL
drm/i915: correctly set the DDI_FUNC_CTL bpc field
drm/i915: set the DDI sync polarity bits
drm/i915: fix pipe DDI mode select
drm/i915: dump the device info
drm/i915: fixup desired rps frequency computation
...
Andreas Herrmann [Tue, 31 Jul 2012 13:41:45 +0000 (15:41 +0200)]
x86, microcode, AMD: Fix broken ucode patch size check
This issue was recently observed on an AMD C-50 CPU where a patch of
maximum size was applied.
Commit
be62adb49294 ("x86, microcode, AMD: Simplify ucode verification")
added current_size in get_matching_microcode(). This is calculated as
size of the ucode patch + 8 (ie. size of the header). Later this is
compared against the maximum possible ucode patch size for a CPU family.
And of course this fails if the patch has already maximum size.
Cc: <stable@vger.kernel.org> [3.3+]
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Link: http://lkml.kernel.org/r/1344361461-10076-1-git-send-email-bp@amd64.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Avi Kivity [Sun, 19 Aug 2012 11:34:31 +0000 (14:34 +0300)]
KVM: x86 emulator: use stack size attribute to mask rsp in stack ops
The sub-register used to access the stack (sp, esp, or rsp) is not
determined by the address size attribute like other memory references,
but by the stack segment's B bit (if not in x86_64 mode).
Fix by using the existing stack_mask() to figure out the correct mask.
This long-existing bug was exposed by a combination of
a27685c33acccce
(emulate invalid guest state by default), which causes many more
instructions to be emulated, and a seabios change (possibly a bug) which
causes the high 16 bits of esp to become polluted across calls to real
mode software interrupts.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Linus Torvalds [Wed, 22 Aug 2012 20:29:06 +0000 (13:29 -0700)]
Linux 3.6-rc3
Linus Torvalds [Wed, 22 Aug 2012 17:45:13 +0000 (10:45 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Intel: edid fixes, power consumption fix, s/r fix, haswell fix
Radeon: BIOS loading fixes for UEFI and Thunderbolt machines, better
MSAA validation, lockup timeout fixes, modesetting fixes
One udl dpms fix, one vmwgfx fix, a couple of trivial core changes.
There is an export added to ACPI as part of the radeon bios fixes.
I've also included the fbcon flashing cursor vs deinit race fix, that
seems the simplest place to start"
Trivial conflict in drivers/video/console/fbcon.c due to me having
already applied the fbcon flashing cursor vs deinit race fix, and Dave
had added a comment in there too.
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (22 commits)
fbcon: fix race condition between console lock and cursor timer (v1.1)
drm: Add missing static storage class specifiers in drm_proc.c file
drm/udl: dpms off the crtc when disabled.
drm: Remove two unused fields from struct drm_display_mode
drm: stop vmgfx driver explosion
drm/radeon/ss: use num_crtc rather than hardcoded 6
Revert "drm/radeon: fix bo creation retry path"
drm/i915: use hsw rps tuning values everywhere on gen6+
drm/radeon: split ATRM support out from the ATPX handler (v3)
drm/radeon: convert radeon vfct code to use acpi_get_table_with_size
ACPI: export symbol acpi_get_table_with_size
drm/radeon: implement ACPI VFCT vbios fetch (v3)
drm/radeon/kms: extend the Fujitsu D3003-S2 board connector quirk to cover later silicon stepping
drm/radeon: fix checking of MSAA renderbuffers on r600-r700
drm/radeon: allow CMASK and FMASK in the CS checker on r600-r700
drm/radeon: init lockup timeout on ring init
drm/radeon: avoid turning off spread spectrum for used pll
drm/i915: fall back to bit-banging if GMBUS fails in CRT EDID reads
drm/i915: extract connector update from intel_ddc_get_modes() for reuse
drm/i915: fix hsw uncached pte
...
Linus Torvalds [Wed, 22 Aug 2012 17:42:30 +0000 (10:42 -0700)]
Merge git://git./linux/kernel/git/nab/target-pending
Pull SCSI target fixes from Nicholas Bellinger:
"The executive summary includes:
- Post-merge review comments for tcm_vhost (MST + nab)
- Avoid debugging overhead when not debugging for tcm-fc(FCoE) (MDR)
- Fix NULL pointer dereference bug on alloc_page failulre (Yi Zou)
- Fix REPORT_LUNs regression bug with pSCSI export (AlexE + nab)
- Fix regression bug with handling of zero-length data CDBs (nab)
- Fix vhost_scsi_target structure alignment (MST)
Thanks again to everyone who contributed a bugfix patch, gave review
feedback on tcm_vhost code, and/or reported a bug during their own
testing over the last weeks.
There is one other outstanding bug reported by Roland recently related
to SCSI transfer length overflow handling, for which the current
proposed bugfix has been left in queue pending further testing with
other non iscsi-target based fabric drivers.
As the patch is verified with loopback (local SGL memory from SCSI
LLD) + tcm_qla2xxx (TCM allocated SGL memory mapped to PCI HW) fabric
ports, it will be included into the next 3.6-rc-fixes PULL request."
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
target: Remove unused se_cmd.cmd_spdtl
tcm_fc: rcu_deref outside rcu lock/unlock section
tcm_vhost: Fix vhost_scsi_target structure alignment
target: Fix regression bug with handling of zero-length data CDBs
target/pscsi: Fix bug with REPORT_LUNs handling for SCSI passthrough
tcm_vhost: Change vhost_scsi_target->vhost_wwpn to char *
target: fix NULL pointer dereference bug alloc_page() fails to get memory
tcm_fc: Avoid debug overhead when not debugging
tcm_vhost: Post-merge review changes requested by MST
tcm_vhost: Fix incorrect IS_ERR() usage in vhost_scsi_map_iov_to_sgl
Linus Torvalds [Wed, 22 Aug 2012 17:41:36 +0000 (10:41 -0700)]
Merge branch 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux
Pull i2c-embedded fixes from Wolfram Sang:
"Some bugfixes for the "embedded" part of the I2C subsystem. The fixes
affect mostly drivers which have been largely reworked lately and
where regressions appeared."
* 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux:
i2c: tegra: protect suspend/resume callbacks with CONFIG_PM_SLEEP
i2c: diolan-u2c: Fix master_xfer return code
I2C: OMAP: xfer: fix runtime PM get/put balance on error
i2c: nomadik: Add default configuration into the Nomadik I2C driver
Linus Torvalds [Wed, 22 Aug 2012 17:27:12 +0000 (10:27 -0700)]
Merge tag 'for-3.6-rc3' of git://gitorious.org/linux-pwm/linux-pwm
Pull pwm fixes from Thierry Reding:
"These patches fix the Samsung PWM driver and perform some minor
cleanups like fixing checkpatch and sparse warnings.
Two redundant error messages are removed and the Kconfig help text for
the PWM subsystem is made more descriptive."
* tag 'for-3.6-rc3' of git://gitorious.org/linux-pwm/linux-pwm:
pwm: Improve Kconfig help text
pwm: core: Fix coding style issues
pwm: vt8500: Fix coding style issue
pwm: Remove a redundant error message when devm_request_and_ioremap fails
pwm: samsung: add missing device pointer to struct pwm_chip
pwm: Add missing static storage class specifiers in core.c file
Linus Torvalds [Wed, 22 Aug 2012 16:58:05 +0000 (09:58 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/sage/ceph-client
Pull ceph fixes from Sage Weil:
"Jim's fix closes a narrow race introduced with the msgr changes. One
fix resolves problems with debugfs initialization that Yan found when
multiple client instances are created (e.g., two clusters mounted, or
rbd + cephfs), another one fixes problems with mounting a nonexistent
server subdirectory, and the last one fixes a divide by zero error
from unsanitized ioctl input that Dan Carpenter found."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
ceph: avoid divide by zero in __validate_layout()
libceph: avoid truncation due to racing banners
ceph: tolerate (and warn on) extraneous dentry from mds
libceph: delay debugfs initialization until we learn global_id
Linus Torvalds [Wed, 22 Aug 2012 16:57:25 +0000 (09:57 -0700)]
Merge tag 'nfs-for-3.6-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
- NFSv3 mounts need to fail if the FSINFO rpc call fails
- Ensure that the NFS commit cache gets torn down when we unload the
NFS module.
- Fix memory scribble issues when interrupting a LAYOUTGET rpc call
- Fix NFSv4 legacy idmapper regressions
- Fix issues with the NFSv4 getacl command
- Fix a regression when using the legacy "mount -t nfs4"
* tag 'nfs-for-3.6-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFSv3: Ensure that do_proc_get_root() reports errors correctly
NFSv4: Ensure that nfs4_alloc_client cleans up on error.
NFS: return -ENOKEY when the upcall fails to map the name
NFS: Clear key construction data if the idmap upcall fails
NFSv4: Don't use private xdr_stream fields in decode_getacl
NFSv4: Fix the acl cache size calculation
NFSv4: Fix pointer arithmetic in decode_getacl
NFS: Alias the nfs module to nfs4
NFS: Fix a regression when loading the NFS v4 module
NFSv4.1: Remove a bogus BUG_ON() in nfs4_layoutreturn_done
pnfs-obj: Better IO pattern in case of unaligned offset
NFS41: add pg_layout_private to nfs_pageio_descriptor
pnfs: nfs4_proc_layoutget returns void
pnfs: defer release of pages in layoutget
nfs: tear down caches in nfs_init_writepagecache when allocation fails
Linus Torvalds [Wed, 22 Aug 2012 16:56:06 +0000 (09:56 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs
Pull assorted fixes - mostly vfs - from Al Viro:
"Assorted fixes, with an unexpected detour into vfio refcounting logics
(fell out when digging in an analog of eventpoll race in there)."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
task_work: add a scheduling point in task_work_run()
fs: fix fs/namei.c kernel-doc warnings
eventpoll: use-after-possible-free in epoll_create1()
vfio: grab vfio_device reference *before* exposing the sucker via fd_install()
vfio: get rid of vfio_device_put()/vfio_group_get_device* races
vfio: get rid of open-coding kref_put_mutex
introduce kref_put_mutex()
vfio: don't dereference after kfree...
mqueue: lift mnt_want_write() outside ->i_mutex, clean up a bit
Simon Farnsworth [Wed, 22 Aug 2012 10:17:17 +0000 (11:17 +0100)]
HID: Remove QUANTA from special drivers list
This QUANTA device is driven by the generic hid-multitouch.ko driver, and
therefore shouldn't be in the special drivers list.
This has been an oversight in 4fa3a58 ("HID: hid-multitouch: Switch to
device groups").
Signed-off-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Artem Bityutskiy [Wed, 22 Aug 2012 13:47:28 +0000 (16:47 +0300)]
UBIFS: fix error messages spelling
Corruptio -> corruption.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Eric Dumazet [Tue, 21 Aug 2012 13:05:14 +0000 (15:05 +0200)]
task_work: add a scheduling point in task_work_run()
It seems commit
4a9d4b02 (switch fput to task_work_add) reintroduced
the problem addressed in commit
944be0b2 (close_files(): add scheduling
point)
If a server process with a lot of files (say 2 million tcp sockets)
is killed, we can spend a lot of time in task_work_run() and trigger
a soft lockup.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>