media: dvb-core: Fix use-after-free due on race condition at dvb_net

[ Upstream commit 4172385b0c9ac366dcab78eda48c26814b87ed1a ]

A race condition may occur between the .disconnect function, which
is called when the device is disconnected, and the dvb_device_open()
function, which is called when the device node is open()ed.
This results in several types of UAFs.

The root cause of this is that you use the dvb_device_open() function,
which does not implement a conditional statement
that checks 'dvbnet->exit'.

So, add 'remove_mutex` to protect 'dvbnet->exit' and use
locked_dvb_net_open() function to check 'dvbnet->exit'.

[mchehab: fix a checkpatch warning]

Link: https://lore.kernel.org/linux-media/20221117045925.14297-3-imv4bel@gmail.com
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: mn88443x: fix !CONFIG_OF error by drop of_match_ptr from ID table

[ Upstream commit ae11c0efaec32fb45130ee9886689f467232eebc ]

The driver will match mostly by DT table (even thought there is regular
ID table) so there is little benefit in of_match_ptr (this also allows
ACPI matching via PRP0001, even though it might not be relevant here).
This also fixes !CONFIG_OF error:

  drivers/media/dvb-frontends/mn88443x.c:782:34: error: ‘mn88443x_of_match’ defined but not used [-Werror=unused-const-variable=]

Link: https://lore.kernel.org/linux-media/20230312131318.351173-28-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ttusb-dec: fix memory leak in ttusb_dec_exit_dvb()

[ Upstream commit 517a281338322ff8293f988771c98aaa7205e457 ]

Since dvb_frontend_detach() is not called in ttusb_dec_exit_dvb(),
which is called when the device is disconnected, dvb_frontend_free()
is not finally called.

This causes a memory leak just by repeatedly plugging and
unplugging the device.

Fix this issue by adding dvb_frontend_detach() to ttusb_dec_exit_dvb().

Link: https://lore.kernel.org/linux-media/20221117045925.14297-5-imv4bel@gmail.com
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: dvb_ca_en50221: fix a size write bug

[ Upstream commit a4315e5be7020aac9b24a8151caf4bb85224cd0e ]

The function of "dvb_ca_en50221_write_data" at source/drivers/media
/dvb-core/dvb_ca_en50221.c is used for two cases.
The first case is for writing APDU data in the function of
"dvb_ca_en50221_io_write" at source/drivers/media/dvb-core/
dvb_ca_en50221.c.
The second case is for writing the host link buf size on the
Command Register in the function of "dvb_ca_en50221_link_init"
at source/drivers/media/dvb-core/dvb_ca_en50221.c.
In the second case, there exists a bug like following.
In the function of the "dvb_ca_en50221_link_init",
after a TV host calculates the host link buf_size,
the TV host writes the calculated host link buf_size on the
Size Register.
Accroding to the en50221 Spec (the page 60 of
https://dvb.org/wp-content/uploads/2020/02/En50221.V1.pdf),
before this writing operation, the "SW(CMDREG_SW)" flag in the
Command Register should be set. We can see this setting operation
in the function of the "dvb_ca_en50221_link_init" like below.
...
if ((ret = ca->pub->write_cam_control(ca->pub, slot,
CTRLIF_COMMAND, IRQEN | CMDREG_SW)) != 0)
return ret;
...
But, after that, the real writing operation is implemented using
the function of the "dvb_ca_en50221_write_data" in the function of
"dvb_ca_en50221_link_init", and the "dvb_ca_en50221_write_data"
includes the function of "ca->pub->write_cam_control",
and the function of the "ca->pub->write_cam_control" in the
function of the "dvb_ca_en50221_wrte_data" does not include
"CMDREG_SW" flag like below.
...
if ((status = ca->pub->write_cam_control(ca->pub, slot,
CTRLIF_COMMAND, IRQEN | CMDREG_HC)) != 0)
...
In the above source code, we can see only the "IRQEN | CMDREG_HC",
but we cannot see the "CMDREG_SW".
The "CMDREG_SW" flag which was set in the function of the
"dvb_ca_en50221_link_init" was rollbacked by the follwoing function
of the "dvb_ca_en50221_write_data".
This is a bug. and this bug causes that the calculated host link buf_size
is not properly written in the CI module.
Through this patch, we fix this bug.

Link: https://lore.kernel.org/linux-media/20220818125027.1131-1-yongsuyoo0215@gmail.com
Signed-off-by: YongSu Yoo <yongsuyoo0215@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: netup_unidvb: fix irq init by register it at the end of probe

[ Upstream commit e6ad6233592593079db5c8fa592c298e51bc1356 ]

IRQ handler netup_spi_interrupt() takes spinlock spi->lock. The lock
is initialized in netup_spi_init(). However, irq handler is registered
before initializing the lock.

Spinlock dma->lock and i2c->lock suffer from the same problem.

Fix this by registering the irq at the end of probe.

Link: https://lore.kernel.org/linux-media/20230315134518.1074497-1-harperchen1110@gmail.com
Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: dvb-usb: dw2102: fix uninit-value in su3000_read_mac_address

[ Upstream commit a3fd1ef27aa686d871cefe207bd6168c4b0cd29e ]

In su3000_read_mac_address, if i2c_transfer fails to execute two
messages, array mac address will not be initialized. Without handling
such error, later in function dvb_usb_adapter_dvb_init, proposed_mac
is accessed before initialization.

Fix this error by returning a negative value if message execution fails.

Link: https://lore.kernel.org/linux-media/20230328124416.560889-1-harperchen1110@gmail.com
Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: dvb-usb: digitv: fix null-ptr-deref in digitv_i2c_xfer()

[ Upstream commit 9ded5bd2a49ce3015b7c936743eec0a0e6e11f0c ]

In digitv_i2c_xfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach digitv_i2c_xfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen. We add
check on msg[i].len to prevent crash.

Similar commit:
commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")

Link: https://lore.kernel.org/linux-media/20230313095008.1039689-1-harperchen1110@gmail.com
Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: dvb-usb-v2: rtl28xxu: fix null-ptr-deref in rtl28xxu_i2c_xfer

[ Upstream commit aa4a447b81b84f69c1a89ad899df157f386d7636 ]

In rtl28xxu_i2c_xfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach rtl28xxu_i2c_xfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen.
We add check on msg[i].len to prevent crash.

Similar commit:
commit 0ed554fd769a
("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")

Link: https://lore.kernel.org/linux-media/tencent_3623572106754AC2F266B316798B0F6CCA05@qq.com
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: dvb-usb-v2: ce6230: fix null-ptr-deref in ce6230_i2c_master_xfer()

[ Upstream commit dff919090155fb22679869e8469168f270dcd97f ]

In ce6230_i2c_master_xfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach ce6230_i2c_master_xfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen. We add
check on msg[i].len to prevent crash.

Similar commit:
commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")

Link: https://lore.kernel.org/linux-media/20230313092751.209496-1-harperchen1110@gmail.com
Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: dvb-usb-v2: ec168: fix null-ptr-deref in ec168_i2c_xfer()

[ Upstream commit a6dcefcc08eca1bf4e3d213c97c3cfb75f377935 ]

In ec168_i2c_xfer, msg is controlled by user. When msg[i].buf is null
and msg[i].len is zero, former checks on msg[i].buf would be passed.
If accessing msg[i].buf[0] without sanity check, null pointer deref
would happen. We add check on msg[i].len to prevent crash.

Similar commit:
commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")

Link: https://lore.kernel.org/linux-media/20230313085853.3252349-1-harperchen1110@gmail.com
Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: dvb-usb: az6027: fix three null-ptr-deref in az6027_i2c_xfer()

[ Upstream commit 858e97d7956d17a2cb56a9413468704a4d5abfe1 ]

In az6027_i2c_xfer, msg is controlled by user. When msg[i].buf is null,
commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in
az6027_i2c_xfer()") fix the null-ptr-deref bug when msg[i].addr is 0x99.
However, null-ptr-deref also happens when msg[i].addr is 0xd0 and 0xc0.
We add check on msg[i].len to prevent null-ptr-deref.

Link: https://lore.kernel.org/linux-media/20230310165604.3093483-1-harperchen1110@gmail.com
Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: dvb_demux: fix a bug for the continuity counter

[ Upstream commit 7efb10d8dc70ea3000cc70dca53407c52488acd1 ]

In dvb_demux.c, some logics exist which compare the expected
continuity counter and the real continuity counter. If they
are not matched each other, both of the expected continuity
counter and the real continuity counter should be printed.
But there exists a bug that the expected continuity counter
is not correctly printed. The expected continuity counter is
replaced with the real countinuity counter + 1 so that
the epected continuity counter is not correclty printed.
This is wrong. This bug is fixed.

Link: https://lore.kernel.org/linux-media/20230305212519.499-1-yongsuyoo0215@gmail.com
Signed-off-by: YongSu Yoo <yongsuyoo0215@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: ssm2602: Add workaround for playback distortions

[ Upstream commit f63550e2b165208a2f382afcaf5551df9569e1d4 ]

Apply a workaround for what appears to be a hardware quirk.

The problem seems to happen when enabling "whole chip power" (bit D7
register R6) for the very first time after the chip receives power. If
either "output" (D4) or "DAC" (D3) aren't powered on at that time,
playback becomes very distorted later on.

This happens on the Google Chameleon v3, as well as on a ZYBO Z7-10:
https://ez.analog.com/audio/f/q-a/543726/solved-ssm2603-right-output-offset-issue/480229
I suspect this happens only when using an external MCLK signal (which
is the case for both of these boards).

Here are some experiments run on a Google Chameleon v3. These were run
in userspace using a wrapper around the i2cset utility:
ssmset() {
        i2cset -y 0 0x1a $(($1*2)) $2
}

For each of the following sequences, we apply power to the ssm2603
chip, set the configuration registers R0-R5 and R7-R8, run the selected
sequence, and check for distortions on playback.

  ssmset 0x09 0x01 # core
  ssmset 0x06 0x07 # chip, out, dac
  OK

  ssmset 0x09 0x01 # core
  ssmset 0x06 0x87 # out, dac
  ssmset 0x06 0x07 # chip
  OK

  (disable MCLK)
  ssmset 0x09 0x01 # core
  ssmset 0x06 0x1f # chip
  ssmset 0x06 0x07 # out, dac
  (enable MCLK)
  OK

  ssmset 0x09 0x01 # core
  ssmset 0x06 0x1f # chip
  ssmset 0x06 0x07 # out, dac
  NOT OK

  ssmset 0x06 0x1f # chip
  ssmset 0x09 0x01 # core
  ssmset 0x06 0x07 # out, dac
  NOT OK

  ssmset 0x09 0x01 # core
  ssmset 0x06 0x0f # chip, out
  ssmset 0x06 0x07 # dac
  NOT OK

  ssmset 0x09 0x01 # core
  ssmset 0x06 0x17 # chip, dac
  ssmset 0x06 0x07 # out
  NOT OK

For each of the following sequences, we apply power to the ssm2603
chip, run the selected sequence, issue a reset with R15, configure
R0-R5 and R7-R8, run one of the NOT OK sequences from above, and check
for distortions.

  ssmset 0x09 0x01 # core
  ssmset 0x06 0x07 # chip, out, dac
  OK

  (disable MCLK)
  ssmset 0x09 0x01 # core
  ssmset 0x06 0x07 # chip, out, dac
  (enable MCLK after reset)
  NOT OK

  ssmset 0x09 0x01 # core
  ssmset 0x06 0x17 # chip, dac
  NOT OK

  ssmset 0x09 0x01 # core
  ssmset 0x06 0x0f # chip, out
  NOT OK

  ssmset 0x06 0x07 # chip, out, dac
  NOT OK

Signed-off-by: Paweł Anikiel <pan@semihalf.com
Link: https://lore.kernel.org/r/20230508113037.137627-8-pan@semihalf.com
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda/realtek: Add quirks for ASUS GU604V and GU603V

[ Upstream commit 4b963ae1df6426f0e51de64133d379d9bde50c48 ]

These models use 2 CS35L41 amplifiers using SPI for down-facing
speakers.

alc285_fixup_speaker2_to_dac1 is needed to fix volume control of the
down-facing speakers.

Pin configs are needed to enable headset mic detection.

Note that these models lack the ACPI _DSD properties needed to
initialize the amplifiers. They can be added during boot to get working
sound out of the speakers:
  https://gist.github.com/lamperez/862763881c0e1c812392b5574727f6ff

Signed-off-by: Alexandru Sorodoc <ealex95@gmail.com>
Link: https://lore.kernel.org/r/20230511161510.315170-1-ealex95@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: dt-bindings: Adjust #sound-dai-cells on TI's single-DAI codecs

[ Upstream commit efb2bfd7b3d210c479b9361c176d7426e5eb8663 ]

A bunch of TI's codecs have binding schemas which force #sound-dai-cells
to one despite those codecs only having a single DAI. Allow for bindings
with zero DAI cells and deprecate the former non-zero value.

Signed-off-by: Martin Povišer <povik+lin@cutebit.org
Link: https://lore.kernel.org/r/20230509153412.62847-1-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm: Check if_id in inbound policy/secpath match

[ Upstream commit 8680407b6f8f5fba59e8f1d63c869abc280f04df ]

This change ensures that if configured in the policy, the if_id set in
the policy and secpath states match during the inbound policy check.
Without this, there is potential for ambiguity where entries in the
secpath differing by only the if_id could be mismatched.

Notably, this is checked in the outbound direction when resolving
templates to SAs, but not on the inbound path when matching SAs and
policies.

Test: Tested against Android kernel unit tests & CTS
Signed-off-by: Benedict Wong <benedictwong@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

um: harddog: fix modular build

[ Upstream commit 73a23d7710331a530e972903318528b75e5a5f58 ]

Since we no longer (want to) export any libc symbols the
_user portions of any drivers need to be built into image
rather than the module. I missed this for the watchdog.
Fix the watchdog accordingly.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: dwc: limit the number of overrun messages

[ Upstream commit ab6ecfbf40fccf74b6ec2ba7ed6dd2fc024c3af2 ]

On slow CPU (FPGA/QEMU emulated) printing overrun messages from
interrupt handler to uart console may leads to more overrun errors.
So use dev_err_ratelimited to limit the number of error messages.

Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru
Link: https://lore.kernel.org/r/20230505062820.21840-1-fido_max@inbox.ru
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: amd: yc: Add DMI entry to support System76 Pangolin 12

[ Upstream commit 7b9891ad25246b18b5ccc19518da7abc7763aa0a ]

Add pang12 quirk to enable the internal microphone.

Signed-off-by: Jeremy Soller <jeremy@system76.com
Signed-off-by: Tim Crawford <tcrawford@system76.com
Link: https://lore.kernel.org/r/20230505161458.19676-1-tcrawford@system76.com
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-pci: add quirk for missing secondary temperature thresholds

[ Upstream commit bd375feeaf3408ed00e08c3bc918d6be15f691ad ]

On Kingston KC3000 and Kingston FURY Renegade (both have the same PCI
IDs) accessing temp3_{min,max} fails with an invalid field error (note
that there is no problem setting the thresholds for temp1).

This contradicts the NVM Express Base Specification 2.0b, page 292:

  The over temperature threshold and under temperature threshold
  features shall be implemented for all implemented temperature sensors
  (i.e., all Temperature Sensor fields that report a non-zero value).

Define NVME_QUIRK_NO_SECONDARY_TEMP_THRESH that disables the thresholds
for all but the composite temperature and set it for this device.

Signed-off-by: Hristo Venev <hristo@venev.name>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-pci: add NVME_QUIRK_BOGUS_NID for HS-SSD-FUTURE 2048G

[ Upstream commit 1616d6c3717bae9041a4240d381ec56ccdaafedc ]

Add a quirk to fix HS-SSD-FUTURE 2048G SSD drives reporting duplicate
nsids.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217384
Reported-by: Andrey God <andreygod83@protonmail.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block/rnbd: replace REQ_OP_FLUSH with REQ_OP_WRITE

[ Upstream commit 5e6e08087a4acb4ee3574cea32dbff0f63c7f608 ]

Since flush bios are implemented as writes with no data and
the preflush flag per Christoph's comment [1].

And we need to change it in rnbd accordingly. Otherwise, I
got splatting when create fs from rnbd client.

[  464.028545] ------------[ cut here ]------------
[  464.028553] WARNING: CPU: 0 PID: 65 at block/blk-core.c:751 submit_bio_noacct+0x32c/0x5d0
[ ... ]
[  464.028668] CPU: 0 PID: 65 Comm: kworker/0:1H Tainted: G           OE      6.4.0-rc1 #9
[  464.028671] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014
[  464.028673] Workqueue: ib-comp-wq ib_cq_poll_work [ib_core]
[  464.028717] RIP: 0010:submit_bio_noacct+0x32c/0x5d0
[  464.028720] Code: 03 0f 85 51 fe ff ff 48 8b 43 18 8b 88 04 03 00 00 85 c9 0f 85 3f fe ff ff e9 be fd ff ff 0f b6 d0 3c 0d 74 26 83 fa 01 74 21 <0f> 0b b8 0a 00 00 00 e9 56 fd ff ff 4c 89 e7 e8 70 a1 03 00 84 c0
[  464.028722] RSP: 0018:ffffaf3680b57c68 EFLAGS: 00010202
[  464.028724] RAX: 0000000000060802 RBX: ffffa09dcc18bf00 RCX: 0000000000000000
[  464.028726] RDX: 0000000000000002 RSI: 0000000000000000 RDI: ffffa09dde081d00
[  464.028727] RBP: ffffaf3680b57c98 R08: ffffa09dde081d00 R09: ffffa09e38327200
[  464.028729] R10: 0000000000000000 R11: 0000000000000000 R12: ffffa09dde081d00
[  464.028730] R13: ffffa09dcb06e1e8 R14: 0000000000000000 R15: 0000000000200000
[  464.028733] FS:  0000000000000000(0000) GS:ffffa09e3bc00000(0000) knlGS:0000000000000000
[  464.028735] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  464.028736] CR2: 000055a4e8206c40 CR3: 0000000119f06000 CR4: 00000000003506f0
[  464.028738] Call Trace:
[  464.028740]  <TASK>
[  464.028746]  submit_bio+0x1b/0x80
[  464.028748]  rnbd_srv_rdma_ev+0x50d/0x10c0 [rnbd_server]
[  464.028754]  ? percpu_ref_get_many.constprop.0+0x55/0x140 [rtrs_server]
[  464.028760]  ? __this_cpu_preempt_check+0x13/0x20
[  464.028769]  process_io_req+0x1dc/0x450 [rtrs_server]
[  464.028775]  rtrs_srv_inv_rkey_done+0x67/0xb0 [rtrs_server]
[  464.028780]  __ib_process_cq+0xbc/0x1f0 [ib_core]
[  464.028793]  ib_cq_poll_work+0x2b/0xa0 [ib_core]
[  464.028804]  process_one_work+0x2a9/0x580

[1]. https://lore.kernel.org/all/ZFHgefWofVt24tRl@infradead.org/

Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20230512034631.28686-1-guoqing.jiang@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nbd: Fix debugfs_create_dir error checking

[ Upstream commit 4913cfcf014c95f0437db2df1734472fd3e15098 ]

The debugfs_create_dir function returns ERR_PTR in case of error, and the
only correct way to check if an error occurred is 'IS_ERR' inline function.
This patch will replace the null-comparison with IS_ERR.

Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230512130533.98709-1-ivan.orlov0322@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: stifb: Fix info entry in sti_struct on error path

[ Upstream commit 0bdf1ad8d10bd4e50a8b1a2c53d15984165f7fea ]

Minor fix to reset the info field to NULL in case of error.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: modedb: Add 1920x1080 at 60 Hz video mode

[ Upstream commit c8902258b2b8ecaa1b8d88c312853c5b14c2553d ]

Add typical resolution for Full-HD monitors.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: imsttfb: Fix use after free bug in imsttfb_probe

[ Upstream commit c75f5a55061091030a13fef71b9995b89bc86213 ]

A use-after-free bug may occur if init_imstt invokes framebuffer_release
and free the info ptr. The caller, imsttfb_probe didn't notice that and
still keep the ptr as private data in pdev.

If we remove the driver which will call imsttfb_remove to make cleanup,
UAF happens.

Fix it by return error code if bad case happens in init_imstt.

Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: set gfx9 onwards APU atomics support to be true

[ Upstream commit af7828fbceed4f9e503034111066a0adef3db383 ]

APUs w/ gfx9 onwards doesn't reply on PCIe atomics, rather
it is internal path w/ native atomic support. Set have_atomics_support
to true.

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Lang Yu <lang.yu@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gfs2: Don't deref jdesc in evict

[ Upstream commit 504a10d9e46bc37b23d0a1ae2f28973c8516e636 ]

On corrupt gfs2 file systems the evict code can try to reference the
journal descriptor structure, jdesc, after it has been freed and set to
NULL. The sequence of events is:

init_journal()
...
fail_jindex:
   gfs2_jindex_free(sdp); <------frees journals, sets jdesc = NULL
      if (gfs2_holder_initialized(&ji_gh))
         gfs2_glock_dq_uninit(&ji_gh);
fail:
   iput(sdp->sd_jindex); <--references jdesc in evict_linked_inode
      evict()
         gfs2_evict_inode()
            evict_linked_inode()
               ret = gfs2_trans_begin(sdp, 0, sdp->sd_jdesc->jd_blocks);
<------references the now freed/zeroed sd_jdesc pointer.

The call to gfs2_trans_begin is done because the truncate_inode_pages
call can cause gfs2 events that require a transaction, such as removing
journaled data (jdata) blocks from the journal.

This patch fixes the problem by adding a check for sdp->sd_jdesc to
function gfs2_evict_inode. In theory, this should only happen to corrupt
gfs2 file systems, when gfs2 detects the problem, reports it, then tries
to evict all the system inodes it has read in up to that point.

Reported-by: Yang Lan <lanyang0908@gmail.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/mellanox: fix potential race in mlxbf-tmfifo driver

[ Upstream commit 3d43f9f639542fadfb28f40b509bf147a6624d48 ]

This commit adds memory barrier for the 'vq' update in function
mlxbf_tmfifo_virtio_find_vqs() to avoid potential race due to
out-of-order memory write. It also adds barrier for the 'is_ready'
flag to make sure the initializations are visible before this flag
is checked.

Signed-off-by: Liming Sun <limings@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/b98c0ab61d644ba38fa9b3fd1607b138b0dd820b.1682518748.git.limings@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: intel_scu_pcidrv: Add back PCI ID for Medfield

[ Upstream commit 4a9b6850c794e4394cad99e2b863d75f5bc8e92f ]

This id was removed in commit b47018a778c1 ("platform/x86: intel_scu_ipc:
Remove Lincroft support"), saying it is only used on Moorestown,
but apparently the same id is also used on Medfield.

Tested on the Medfield based Motorola RAZR i smartphone.

Signed-off-by: Julian Winkler <julian.winkler1@web.de>
Link: https://lore.kernel.org/r/20230416154932.6579-1-julian.winkler1@web.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: rcar-vin: Select correct interrupt mode for V4L2_FIELD_ALTERNATE

[ Upstream commit e10707d5865c90d3dfe4ef589ce02ff4287fef85 ]

When adding proper support for V4L2_FIELD_ALTERNATE it was missed that
this field format should trigger an interrupt for each field, not just
for the whole frame. Fix this by marking it as progressive in the
capture setup, which will then select the correct interrupt mode.

Tested on both Gen2 and Gen3 with the result of a doubling of the frame
rate for V4L2_FIELD_ALTERNATE. From a PAL video source the frame rate is
now 50, which is expected for alternate field capture.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (k10temp) Add PCI ID for family 19, model 78h

[ Upstream commit 7d8accfaa0ab65e4282c8e58950f7d688342cd86 ]

Enable k10temp on this system.

  [ bp: Massage. ]

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230427053338.16653-3-mario.limonciello@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 9295/1: unwind:fix unwind abort for uleb128 case

[ Upstream commit fa3eeb638de0c1a9d2d860e5b48259facdd65176 ]

When unwind instruction is 0xb2,the subsequent instructions
are uleb128 bytes.
For now,it uses only the first uleb128 byte in code.

For vsp increments of 0x204~0x400,use one uleb128 byte like below:
0xc06a00e4 <unwind_test_work>: 0x80b27fac
  Compact model index: 0
  0xb2 0x7f vsp = vsp + 1024
  0xac      pop {r4, r5, r6, r7, r8, r14}

For vsp increments larger than 0x400,use two uleb128 bytes like below:
0xc06a00e4 <unwind_test_work>: @0xc0cc9e0c
  Compact model index: 1
  0xb2 0x81 0x01 vsp = vsp + 1032
  0xac      pop {r4, r5, r6, r7, r8, r14}
The unwind works well since the decoded uleb128 byte is also 0x81.

For vsp increments larger than 0x600,use two uleb128 bytes like below:
0xc06a00e4 <unwind_test_work>: @0xc0cc9e0c
  Compact model index: 1
  0xb2 0x81 0x02 vsp = vsp + 1544
  0xac      pop {r4, r5, r6, r7, r8, r14}
In this case,the decoded uleb128 result is 0x101(vsp=0x204+(0x101<<2)).
While the uleb128 used in code is 0x81(vsp=0x204+(0x81<<2)).
The unwind aborts at this frame since it gets incorrect vsp.

To fix this,add uleb128 decode to cover all the above case.

Signed-off-by: Haibo Li <haibo.li@mediatek.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: abort transaction when sibling keys check fails for leaves

[ Upstream commit 9ae5afd02a03d4e22a17a9609b19400b77c36273 ]

If the sibling keys check fails before we move keys from one sibling
leaf to another, we are not aborting the transaction - we leave that to
some higher level caller of btrfs_search_slot() (or anything else that
uses it to insert items into a b+tree).

This means that the transaction abort will provide a stack trace that
omits the b+tree modification call chain. So change this to immediately
abort the transaction and therefore get a more useful stack trace that
shows us the call chain in the bt+tree modification code.

It's also important to immediately abort the transaction just in case
some higher level caller is not doing it, as this indicates a very
serious corruption and we should stop the possibility of doing further
damage.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/ast: Fix ARM compatibility

[ Upstream commit 4327a6137ed43a091d900b1ac833345d60f32228 ]

ARM architecture only has 'memory', so all devices are accessed by
MMIO if possible.

Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230421003354.27767-1-jammy_huang@aspeedtech.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mailbox: mailbox-test: Fix potential double-free in mbox_test_message_write()

[ Upstream commit 2d1e952a2b8e5e92d8d55ac88a7cf7ca5ea591ad ]

If a user can make copy_from_user() fail, there is a potential for
UAF/DF due to a lack of locking around the allocation, use and freeing
of the data buffers.

This issue is not theoretical.  I managed to author a POC for it:

    BUG: KASAN: double-free in kfree+0x5c/0xac
    Free of addr ffff29280be5de00 by task poc/356
    CPU: 1 PID: 356 Comm: poc Not tainted 6.1.0-00001-g961aa6552c04-dirty #20
    Hardware name: linux,dummy-virt (DT)
    Call trace:
     dump_backtrace.part.0+0xe0/0xf0
     show_stack+0x18/0x40
     dump_stack_lvl+0x64/0x80
     print_report+0x188/0x48c
     kasan_report_invalid_free+0xa0/0xc0
     ____kasan_slab_free+0x174/0x1b0
     __kasan_slab_free+0x18/0x24
     __kmem_cache_free+0x130/0x2e0
     kfree+0x5c/0xac
     mbox_test_message_write+0x208/0x29c
     full_proxy_write+0x90/0xf0
     vfs_write+0x154/0x440
     ksys_write+0xcc/0x180
     __arm64_sys_write+0x44/0x60
     invoke_syscall+0x60/0x190
     el0_svc_common.constprop.0+0x7c/0x160
     do_el0_svc+0x40/0xf0
     el0_svc+0x2c/0x6c
     el0t_64_sync_handler+0xf4/0x120
     el0t_64_sync+0x18c/0x190

    Allocated by task 356:
     kasan_save_stack+0x3c/0x70
     kasan_set_track+0x2c/0x40
     kasan_save_alloc_info+0x24/0x34
     __kasan_kmalloc+0xb8/0xc0
     kmalloc_trace+0x58/0x70
     mbox_test_message_write+0x6c/0x29c
     full_proxy_write+0x90/0xf0
     vfs_write+0x154/0x440
     ksys_write+0xcc/0x180
     __arm64_sys_write+0x44/0x60
     invoke_syscall+0x60/0x190
     el0_svc_common.constprop.0+0x7c/0x160
     do_el0_svc+0x40/0xf0
     el0_svc+0x2c/0x6c
     el0t_64_sync_handler+0xf4/0x120
     el0t_64_sync+0x18c/0x190

    Freed by task 357:
     kasan_save_stack+0x3c/0x70
     kasan_set_track+0x2c/0x40
     kasan_save_free_info+0x38/0x5c
     ____kasan_slab_free+0x13c/0x1b0
     __kasan_slab_free+0x18/0x24
     __kmem_cache_free+0x130/0x2e0
     kfree+0x5c/0xac
     mbox_test_message_write+0x208/0x29c
     full_proxy_write+0x90/0xf0
     vfs_write+0x154/0x440
     ksys_write+0xcc/0x180
     __arm64_sys_write+0x44/0x60
     invoke_syscall+0x60/0x190
     el0_svc_common.constprop.0+0x7c/0x160
     do_el0_svc+0x40/0xf0
     el0_svc+0x2c/0x6c
     el0t_64_sync_handler+0xf4/0x120
     el0t_64_sync+0x18c/0x190

Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Use the default reset when loading or reloading the driver

[ Upstream commit 4eea7fb980dc44545a32eec92e2662053b34cd9d ]

Below call trace and errors are observed when reloading
amdgpu driver with the module parameter reset_method=3.

It should do a default reset when loading or reloading the
driver, regardless of the module parameter reset_method.

v2: add comments inside and modify commit messages.

[  +2.180243] [drm] psp gfx command ID_LOAD_TOC(0x20) failed
and response status is (0x0)
[  +0.000011] [drm:psp_hw_start [amdgpu]] *ERROR* Failed to load toc
[  +0.000890] [drm:psp_hw_start [amdgpu]] *ERROR* PSP tmr init failed!
[  +0.020683] [drm:amdgpu_fill_buffer [amdgpu]] *ERROR* Trying to
clear memory with ring turned off.
[  +0.000003] RIP: 0010:amdgpu_bo_release_notify+0x1ef/0x210 [amdgpu]
[  +0.000004] Call Trace:
[  +0.000003]  <TASK>
[  +0.000008]  ttm_bo_release+0x2c4/0x330 [amdttm]
[  +0.000026]  amdttm_bo_put+0x3c/0x70 [amdttm]
[  +0.000020]  amdgpu_bo_free_kernel+0xe6/0x140 [amdgpu]
[  +0.000728]  psp_v11_0_ring_destroy+0x34/0x60 [amdgpu]
[  +0.000826]  psp_hw_init+0xe7/0x2f0 [amdgpu]
[  +0.000813]  amdgpu_device_fw_loading+0x1ad/0x2d0 [amdgpu]
[  +0.000731]  amdgpu_device_init.cold+0x108e/0x2002 [amdgpu]
[  +0.001071]  ? do_pci_enable_device+0xe1/0x110
[  +0.000011]  amdgpu_driver_load_kms+0x1a/0x160 [amdgpu]
[  +0.000729]  amdgpu_pci_probe+0x179/0x3a0 [amdgpu]

Signed-off-by: lyndonli <Lyndon.Li@amd.com>
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: soc-acpi-cht: Add quirk for Nextbook Ares 8A tablet

[ Upstream commit ec6f82b4c63cc68f8dc03316e725106d242706be ]

The Nextbook Ares 8A tablet which has Android as factory OS, has a buggy
DSDT with both ESSX8316 and 10EC5651 ACPI devices.

This tablet actually uses an rt5651 codec, but the matching code ends up
picking the ESSX8316 device, add a quirk to ignote the ESSX8316 device
on this tablet.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Message-Id: <20230429104721.7176-1-hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda: Glenfly: add HD Audio PCI IDs and HDMI Codec Vendor IDs.

[ Upstream commit c51e431052e2eacfb23fbf6b39bc6c8770d9827a ]

Add a set of HD Audio PCI IDS, and the HDMI codec vendor IDs for
Glenfly Gpus.

- In default_bdl_pos_adj, set bdl to 128 as Glenfly Gpus have hardware
limitation, need to increase hdac interrupt interval.
- In azx_first_init, enable polling mode for Glenfly Gpu. When the codec
complete the command, it sends interrupt and writes response entries to
memory, howerver, the write requests sometimes are not actually
synchronized to memory when driver handle hdac interrupt on Glenfly Gpus.
If the RIRB status is not updated in the interrupt handler,
azx_rirb_get_response keeps trying to recevie a response from rirb until
1s timeout. Enabling polling mode for Glenfly Gpu can fix the issue.
- In patch_gf_hdmi, set Glenlfy Gpu Codec's no_sticky_stream as it need
driver to do actual clean-ups for the linked codec when switch from one
codec to another.

Signed-off-by: jasontao <jasontao@glenfly.com>
Signed-off-by: Reaper Li <reaperlioc@glenfly.com>
Link: https://lore.kernel.org/r/20230426013059.4329-1-reaperlioc@glenfly.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog: menz069_wdt: fix watchdog initialisation

[ Upstream commit 87b22656ca6a896d0378e9e60ffccb0c82f48b08 ]

Doing a 'cat /dev/watchdog0' with menz069_wdt as watchdog0 will result in
a NULL pointer dereference.

This happens because we're passing the wrong pointer to
watchdog_register_device(). Fix this by getting rid of the static
watchdog_device structure and use the one embedded into the driver's
per-instance private data.

Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230418172531.177349-2-jth@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: release gpu full access after "amdgpu_device_ip_late_init"

[ Upstream commit 38eecbe086a4e52f54b2bbda8feba65d44addbef ]

[WHY]
 Function "amdgpu_irq_update()" called by "amdgpu_device_ip_late_init()" is an atomic context.
 We shouldn't access registers through KIQ since "msleep()" may be called in "amdgpu_kiq_rreg()".

[HOW]
 Move function "amdgpu_virt_release_full_gpu()" after function "amdgpu_device_ip_late_init()",
 to ensure that registers be accessed through RLCG instead of KIQ.

Call Trace:
  <TASK>
  show_stack+0x52/0x69
  dump_stack_lvl+0x49/0x6d
  dump_stack+0x10/0x18
  __schedule_bug.cold+0x4f/0x6b
  __schedule+0x473/0x5d0
  ? __wake_up_klogd.part.0+0x40/0x70
  ? vprintk_emit+0xbe/0x1f0
  schedule+0x68/0x110
  schedule_timeout+0x87/0x160
  ? timer_migration_handler+0xa0/0xa0
  msleep+0x2d/0x50
  amdgpu_kiq_rreg+0x18d/0x1f0 [amdgpu]
  amdgpu_device_rreg.part.0+0x59/0xd0 [amdgpu]
  amdgpu_device_rreg+0x3a/0x50 [amdgpu]
  amdgpu_sriov_rreg+0x3c/0xb0 [amdgpu]
  gfx_v10_0_set_gfx_eop_interrupt_state.constprop.0+0x16c/0x190 [amdgpu]
  gfx_v10_0_set_eop_interrupt_state+0xa5/0xb0 [amdgpu]
  amdgpu_irq_update+0x53/0x80 [amdgpu]
  amdgpu_irq_get+0x7c/0xb0 [amdgpu]
  amdgpu_fence_driver_hw_init+0x58/0x90 [amdgpu]
  amdgpu_device_init.cold+0x16b7/0x2022 [amdgpu]

Signed-off-by: Chong Li <chongli2@amd.com>
Reviewed-by: JingWen.Chen2@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mptcp: add annotations around sk->sk_shutdown accesses

[ Upstream commit 6b9831bfd9322b297eb6d44257808cc055fdc586 ]

Christoph reported the mptcp variant of a recently addressed plain
TCP issue. Similar to commit e14cadfd80d7 ("tcp: add annotations around
sk->sk_shutdown accesses") add READ/WRITE ONCE annotations to silence
KCSAN reports around lockless sk_shutdown access.

Fixes: 71ba088ce0aa ("mptcp: cleanup accept and poll")
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/401
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mptcp: fix data race around msk->first access

[ Upstream commit 1b1b43ee7a208096ecd79e626f2fc90d4a321111 ]

The first subflow socket is accessed outside the msk socket lock
by mptcp_subflow_fail(), we need to annotate each write access
with WRITE_ONCE, but a few spots still lacks it.

Fixes: 76a13b315709 ("mptcp: invoke MP_FAIL response when needed")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mptcp: consolidate passive msk socket initialization

[ Upstream commit 7e8b88ec35eef363040e08d99536d2bebef83774 ]

When the msk socket is cloned at MPC handshake time, a few
fields are initialized in a racy way outside mptcp_sk_clone()
and the msk socket lock.

The above is due historical reasons: before commit a88d0092b24b
("mptcp: simplify subflow_syn_recv_sock()") as the first subflow socket
carrying all the needed date was not available yet at msk creation
time

We can now refactor the code moving the missing initialization bit
under the socket lock, removing the init race and avoiding some
code duplication.

This will also simplify the next patch, as all msk->first write
access are now under the msk socket lock.

Fixes: 0397c6d85f9c ("mptcp: keep unaccepted MPC subflow into join list")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mptcp: simplify subflow_syn_recv_sock()

[ Upstream commit a88d0092b24b8cddce57fe0e88e60a9e29e0b515 ]

Postpone the msk cloning to the child process creation
so that we can avoid a bunch of conditionals.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/61
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 7e8b88ec35ee ("mptcp: consolidate passive msk socket initialization")
Signed-off-by: Sasha Levin <sashal@kernel.org>

mptcp: avoid unneeded address copy

[ Upstream commit 2bb9a37f0e194ed95c70603b0efc7898a5a0d9b4 ]

In the syn_recv fallback path, the msk is unused. We can skip
setting the socket address.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 7e8b88ec35ee ("mptcp: consolidate passive msk socket initialization")
Signed-off-by: Sasha Levin <sashal@kernel.org>

mptcp: add annotations around msk->subflow accesses

[ Upstream commit 5b825727d0871b23e8867f6371183e61628b4a26 ]

The MPTCP can access the first subflow socket in a few spots
outside the socket lock scope. That is actually safe, as MPTCP
will delete the socket itself only after the msk sock close().

Still the such accesses causes a few KCSAN splats, as reported
by Christoph. Silence the harmless warning adding a few annotation
around the relevant accesses.

Fixes: 71ba088ce0aa ("mptcp: cleanup accept and poll")
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/402
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mptcp: avoid unneeded __mptcp_nmpc_socket() usage

[ Upstream commit 617612316953093bc859890e405e1b550c27d840 ]

In a few spots, the mptcp code invokes the __mptcp_nmpc_socket() helper
multiple times under the same socket lock scope. Additionally, in such
places, the socket status ensures that there is no MP capable handshake
running.

Under the above condition we can replace the later __mptcp_nmpc_socket()
helper invocation with direct access to the msk->subflow pointer and
better document such access is not supposed to fail with WARN().

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 5b825727d087 ("mptcp: add annotations around msk->subflow accesses")
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtnetlink: call validate_linkmsg in rtnl_create_link

commit b0ad3c179059089d809b477a1d445c1183a7b8fe upstream.

validate_linkmsg() was introduced by commit 1840bb13c22f5b ("[RTNL]:
Validate hardware and broadcast address attribute for RTM_NEWLINK")
to validate tb[IFLA_ADDRESS/BROADCAST] for existing links. The same
check should also be done for newly created links.

This patch adds validate_linkmsg() call in rtnl_create_link(), to
avoid the invalid address set when creating some devices like:

  # ip link add dummy0 type dummy
  # ip link add link dummy0 name mac0 address 01:02 type macsec

Fixes: 0e06877c6fdb ("[RTNETLINK]: rtnl_link: allow specifying initial device address")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: marvell: don't set the NAND frequency select

[ Upstream commit c4d28e30a8d0b979e4029465ab8f312ab6ce2644 ]

marvell_nfc_setup_interface() uses the frequency retrieved from the
clock associated with the nand interface to determine the timings that
will be used. By changing the NAND frequency select without reflecting
this in the clock configuration this means that the timings calculated
don't correctly meet the requirements of the NAND chip. This hasn't been
an issue up to now because of a different bug that was stopping the
timings being updated after they were initially set.

Fixes: b25251414f6e ("mtd: rawnand: marvell: Stop implementing ->select_chip()")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230525003154.2303012-2-chris.packham@alliedtelesis.co.nz
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: marvell: ensure timing values are written

[ Upstream commit 8a6f4d346f3bad9c68b4a87701eb3f7978542d57 ]

When new timing values are calculated in marvell_nfc_setup_interface()
ensure that they will be applied in marvell_nfc_select_target() by
clearing the selected_chip pointer.

Fixes: b25251414f6e ("mtd: rawnand: marvell: Stop implementing ->select_chip()")
Suggested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230525003154.2303012-1-chris.packham@alliedtelesis.co.nz
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: mv88e6xxx: Increase wait after reset deactivation

[ Upstream commit 3c27f3d53d588618d81d30d6712459a3cc9489b8 ]

A switch held in reset by default needs to wait longer until we can
reliably detect it.

An issue was observed when testing on the Marvell 88E6393X (Link Street).
The driver failed to detect the switch on some upstarts. Increasing the
wait time after reset deactivation solves this issue.

The updated wait time is now also the same as the wait time in the
mv88e6xxx_hardware_reset function.

Fixes: 7b75e49de424 ("net: dsa: mv88e6xxx: wait after reset deactivation")
Signed-off-by: Andreas Svensson <andreas.svensson@axis.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230530145223.1223993-1-andreas.svensson@axis.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: fix mishandling when the sack compression is deferred.

[ Upstream commit 30c6f0bf9579debce27e45fac34fdc97e46acacc ]

In this patch, we mainly try to handle sending a compressed ack
correctly if it's deferred.

Here are more details in the old logic:
When sack compression is triggered in the tcp_compressed_ack_kick(),
if the sock is owned by user, it will set TCP_DELACK_TIMER_DEFERRED
and then defer to the release cb phrase. Later once user releases
the sock, tcp_delack_timer_handler() should send a ack as expected,
which, however, cannot happen due to lack of ICSK_ACK_TIMER flag.
Therefore, the receiver would not sent an ack until the sender's
retransmission timeout. It definitely increases unnecessary latency.

Fixes: 5d9f4262b7ea ("tcp: add SACK compression")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: fuyuanli <fuyuanli@didiglobal.com>
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://lore.kernel.org/netdev/20230529113804.GA20300@didi-ThinkCentre-M920t-N000/
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230531080150.GA20424@didi-ThinkCentre-M920t-N000
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/sched: flower: fix possible OOB write in fl_set_geneve_opt()

[ Upstream commit 4d56304e5827c8cc8cc18c75343d283af7c4825c ]

If we send two TCA_FLOWER_KEY_ENC_OPTS_GENEVE packets and their total
size is 252 bytes(key->enc_opts.len = 252) then
key->enc_opts.len = opt->length = data_len / 4 = 0 when the third
TCA_FLOWER_KEY_ENC_OPTS_GENEVE packet enters fl_set_geneve_opt. This
bypasses the next bounds check and results in an out-of-bounds.

Fixes: 0a6e77784f49 ("net/sched: allow flower to match tunnel options")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Link: https://lore.kernel.org/r/20230531102805.27090-1-hbh25y@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/mediatek: Flush IOTLB completely only if domain has been attached

[ Upstream commit b3fc95709c54ffbe80f16801e0a792a4d2b3d55e ]

If an IOMMU domain was never attached, it lacks any linkage to the
actual IOMMU hardware. Attempting to do flush_iotlb_all() on it will
result in a NULL pointer dereference. This seems to happen after the
recent IOMMU core rework in v6.4-rc1.

    Unable to handle kernel read from unreadable memory at virtual address 0000000000000018
    Call trace:
     mtk_iommu_flush_iotlb_all+0x20/0x80
     iommu_create_device_direct_mappings.part.0+0x13c/0x230
     iommu_setup_default_domain+0x29c/0x4d0
     iommu_probe_device+0x12c/0x190
     of_iommu_configure+0x140/0x208
     of_dma_configure_id+0x19c/0x3c0
     platform_dma_configure+0x38/0x88
     really_probe+0x78/0x2c0

Check if the "bank" field has been filled in before actually attempting
the IOTLB flush to avoid it. The IOTLB is also flushed when the device
comes out of runtime suspend, so it should have a clean initial state.

Fixes: 08500c43d4f7 ("iommu/mediatek: Adjust the structure")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230526085402.394239-1-wenst@chromium.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Read embedded cpu after init bit cleared

[ Upstream commit bbfa4b58997e3d38ba629c9f6fc0bd1c163aaf43 ]

During driver load it reads embedded_cpu bit from initialization
segment, but the initialization segment is readable only after
initialization bit is cleared.

Move the call to mlx5_read_embedded_cpu() right after initialization bit
cleared.

Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Fixes: 591905ba9679 ("net/mlx5: Introduce Mellanox SmartNIC and modify page management logic")
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Fix error handling in mlx5e_refresh_tirs

[ Upstream commit b6193d7030e3c59f1d4c75648c9c8fa40cad2bcd ]

Allocation failure is outside the critical lock section and should
return immediately rather than jumping to the unlock section.

Also unlock as soon as required and remove the now redundant jump label.

Fixes: 80a2a9026b24 ("net/mlx5e: Add a lock on tir list")
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme: fix the name of Zone Append for verbose logging

[ Upstream commit 856303797724d28f1d65b702f0eadcee1ea7abf5 ]

No Management involved in Zone Appened.

Fixes: bd83fe6f2cd2 ("nvme: add verbose error logging")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alan Adamson <alan.adamson@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfsd: fix double fget() bug in __write_ports_addfd()

[ Upstream commit c034203b6a9dae6751ef4371c18cb77983e30c28 ]

The bug here is that you cannot rely on getting the same socket
from multiple calls to fget() because userspace can influence
that.  This is a kind of double fetch bug.

The fix is to delete the svc_alien_sock() function and instead do
the checking inside the svc_addsock() function.

Fixes: 3064639423c4 ("nfsd: check passed socket's net matches NFSd superblock's one")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: NeilBrown <neilb@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

udp6: Fix race condition in udp6_sendmsg & connect

[ Upstream commit 448a5ce1120c5bdbce1f1ccdabcd31c7d029f328 ]

Syzkaller got the following report:
BUG: KASAN: use-after-free in sk_setup_caps+0x621/0x690 net/core/sock.c:2018
Read of size 8 at addr ffff888027f82780 by task syz-executor276/3255

The function sk_setup_caps (called by ip6_sk_dst_store_flow->
ip6_dst_store) referenced already freed memory as this memory was
freed by parallel task in udpv6_sendmsg->ip6_sk_dst_lookup_flow->
sk_dst_check.

          task1 (connect)              task2 (udp6_sendmsg)
        sk_setup_caps->sk_dst_set |
                                  |  sk_dst_check->
                                  |      sk_dst_set
                                  |      dst_release
        sk_setup_caps references  |
        to already freed dst_entry|

The reason for this race condition is: sk_setup_caps() keeps using
the dst after transferring the ownership to the dst cache.

Found by Linux Verification Center (linuxtesting.org) with syzkaller.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Vladislav Efanov <VEfanov@ispras.ru>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/netlink: fix NETLINK_LIST_MEMBERSHIPS length report

[ Upstream commit f4e4534850a9d18c250a93f8d7fbb51310828110 ]

The current code for the length calculation wrongly truncates the reported
length of the groups array, causing an under report of the subscribed
groups. To fix this, use 'BITS_TO_BYTES()' which rounds up the
division by 8.

Fixes: b42be38b2778 ("netlink: add API to retrieve all group memberships")
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230529153335.389815-1-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sched: fix NULL pointer dereference in mq_attach

[ Upstream commit 36eec020fab668719b541f34d97f44e232ffa165 ]

When use the following command to test:
1)ip link add bond0 type bond
2)ip link set bond0 up
3)tc qdisc add dev bond0 root handle ffff: mq
4)tc qdisc replace dev bond0 parent ffff:fff1 handle ffff: mq

The kernel reports NULL pointer dereference issue. The stack information
is as follows:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Internal error: Oops: 0000000096000006 [#1] SMP
Modules linked in:
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : mq_attach+0x44/0xa0
lr : qdisc_graft+0x20c/0x5cc
sp : ffff80000e2236a0
x29: ffff80000e2236a0 x28: ffff0000c0e59d80 x27: ffff0000c0be19c0
x26: ffff0000cae3e800 x25: 0000000000000010 x24: 00000000fffffff1
x23: 0000000000000000 x22: ffff0000cae3e800 x21: ffff0000c9df4000
x20: ffff0000c9df4000 x19: 0000000000000000 x18: ffff80000a934000
x17: ffff8000f5b56000 x16: ffff80000bb08000 x15: 0000000000000000
x14: 0000000000000000 x13: 6b6b6b6b6b6b6b6b x12: 6b6b6b6b00000001
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : ffff0000c0be0730 x7 : bbbbbbbbbbbbbbbb x6 : 0000000000000008
x5 : ffff0000cae3e864 x4 : 0000000000000000 x3 : 0000000000000001
x2 : 0000000000000001 x1 : ffff8000090bc23c x0 : 0000000000000000
Call trace:
mq_attach+0x44/0xa0
qdisc_graft+0x20c/0x5cc
tc_modify_qdisc+0x1c4/0x664
rtnetlink_rcv_msg+0x354/0x440
netlink_rcv_skb+0x64/0x144
rtnetlink_rcv+0x28/0x34
netlink_unicast+0x1e8/0x2a4
netlink_sendmsg+0x308/0x4a0
sock_sendmsg+0x64/0xac
____sys_sendmsg+0x29c/0x358
___sys_sendmsg+0x90/0xd0
__sys_sendmsg+0x7c/0xd0
__arm64_sys_sendmsg+0x2c/0x38
invoke_syscall+0x54/0x114
el0_svc_common.constprop.1+0x90/0x174
do_el0_svc+0x3c/0xb0
el0_svc+0x24/0xec
el0t_64_sync_handler+0x90/0xb4
el0t_64_sync+0x174/0x178

This is because when mq is added for the first time, qdiscs in mq is set
to NULL in mq_attach(). Therefore, when replacing mq after adding mq, we
need to initialize qdiscs in the mq before continuing to graft. Otherwise,
it will couse NULL pointer dereference issue in mq_attach(). And the same
issue will occur in the attach functions of mqprio, taprio and htb.
ffff:fff1 means that the repalce qdisc is ingress. Ingress does not allow
any qdisc to be attached. Therefore, ffff:fff1 is incorrectly used, and
the command should be dropped.

Fixes: 6ec1c69a8f64 ("net_sched: add classful multiqueue dummy scheduler")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Tested-by: Peilin Ye <peilin.ye@bytedance.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20230527093747.3583502-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/sched: Prohibit regrafting ingress or clsact Qdiscs

[ Upstream commit 9de95df5d15baa956c2b70b9e794842e790a8a13 ]

Currently, after creating an ingress (or clsact) Qdisc and grafting it
under TC_H_INGRESS (TC_H_CLSACT), it is possible to graft it again under
e.g. a TBF Qdisc:

  $ ip link add ifb0 type ifb
  $ tc qdisc add dev ifb0 handle 1: root tbf rate 20kbit buffer 1600 limit 3000
  $ tc qdisc add dev ifb0 clsact
  $ tc qdisc link dev ifb0 handle ffff: parent 1:1
  $ tc qdisc show dev ifb0
  qdisc tbf 1: root refcnt 2 rate 20Kbit burst 1600b lat 560.0ms
  qdisc clsact ffff: parent ffff:fff1 refcnt 2
                                      ^^^^^^^^

clsact's refcount has increased: it is now grafted under both
TC_H_CLSACT and 1:1.

ingress and clsact Qdiscs should only be used under TC_H_INGRESS
(TC_H_CLSACT).  Prohibit regrafting them.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Fixes: 1f211a1b929c ("net, sched: add clsact qdisc")
Tested-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/sched: Reserve TC_H_INGRESS (TC_H_CLSACT) for ingress (clsact) Qdiscs

[ Upstream commit f85fa45d4a9408d98c46c8fa45ba2e3b2f4bf219 ]

Currently it is possible to add e.g. an HTB Qdisc under ffff:fff1
(TC_H_INGRESS, TC_H_CLSACT):

  $ ip link add name ifb0 type ifb
  $ tc qdisc add dev ifb0 parent ffff:fff1 htb
  $ tc qdisc add dev ifb0 clsact
  Error: Exclusivity flag on, cannot modify.
  $ drgn
  ...
  >>> ifb0 = netdev_get_by_name(prog, "ifb0")
  >>> qdisc = ifb0.ingress_queue.qdisc_sleeping
  >>> print(qdisc.ops.id.string_().decode())
  htb
  >>> qdisc.flags.value_() # TCQ_F_INGRESS
  2

Only allow ingress and clsact Qdiscs under ffff:fff1.  Return -EINVAL
for everything else.  Make TCQ_F_INGRESS a static flag of ingress and
clsact Qdiscs.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Fixes: 1f211a1b929c ("net, sched: add clsact qdisc")
Tested-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/sched: sch_clsact: Only create under TC_H_CLSACT

[ Upstream commit 5eeebfe6c493192b10d516abfd72742900f2a162 ]

clsact Qdiscs are only supposed to be created under TC_H_CLSACT (which
equals TC_H_INGRESS).  Return -EOPNOTSUPP if 'parent' is not
TC_H_CLSACT.

Fixes: 1f211a1b929c ("net, sched: add clsact qdisc")
Tested-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/sched: sch_ingress: Only create under TC_H_INGRESS

[ Upstream commit c7cfbd115001f94de9e4053657946a383147e803 ]

ingress Qdiscs are only supposed to be created under TC_H_INGRESS.
Return -EOPNOTSUPP if 'parent' is not TC_H_INGRESS, similar to
mq_init().

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+b53a9c0d1ea4ad62da8b@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/0000000000006cf87705f79acf1a@google.com/
Tested-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/smc: Don't use RMBs not mapped to new link in SMCRv2 ADD LINK

[ Upstream commit 71c6aa0305e3d2365d3bfd0134b4025d9e7ba388 ]

We encountered a crash when using SMCRv2. It is caused by a logical
error in smc_llc_fill_ext_v2().

 BUG: kernel NULL pointer dereference, address: 0000000000000014
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 0 P4D 0
 Oops: 0000 [#1] PREEMPT SMP PTI
 CPU: 7 PID: 453 Comm: kworker/7:4 Kdump: loaded Tainted: G        W   E      6.4.0-rc3+ #44
 Workqueue: events smc_llc_add_link_work [smc]
 RIP: 0010:smc_llc_fill_ext_v2+0x117/0x280 [smc]
 RSP: 0018:ffffacb5c064bd88 EFLAGS: 00010282
 RAX: ffff9a6bc1c3c02c RBX: ffff9a6be3558000 RCX: 0000000000000000
 RDX: 0000000000000002 RSI: 0000000000000002 RDI: 000000000000000a
 RBP: ffffacb5c064bdb8 R08: 0000000000000040 R09: 000000000000000c
 R10: ffff9a6bc0910300 R11: 0000000000000002 R12: 0000000000000000
 R13: 0000000000000002 R14: ffff9a6bc1c3c02c R15: ffff9a6be3558250
 FS:  0000000000000000(0000) GS:ffff9a6eefdc0000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000014 CR3: 000000010b078003 CR4: 00000000003706e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  smc_llc_send_add_link+0x1ae/0x2f0 [smc]
  smc_llc_srv_add_link+0x2c9/0x5a0 [smc]
  ? cc_mkenc+0x40/0x60
  smc_llc_add_link_work+0xb8/0x140 [smc]
  process_one_work+0x1e5/0x3f0
  worker_thread+0x4d/0x2f0
  ? __pfx_worker_thread+0x10/0x10
  kthread+0xe5/0x120
  ? __pfx_kthread+0x10/0x10
  ret_from_fork+0x2c/0x50
  </TASK>

When an alernate RNIC is available in system, SMC will try to add a new
link based on the RNIC for resilience. All the RMBs in use will be mapped
to the new link. Then the RMBs' MRs corresponding to the new link will be
filled into SMCRv2 LLC ADD LINK messages.

However, smc_llc_fill_ext_v2() mistakenly accesses to unused RMBs which
haven't been mapped to the new link and have no valid MRs, thus causing
a crash. So this patch fixes the logic.

Fixes: b4ba4652b3f8 ("net/smc: extend LLC layer for SMC-Rv2")
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/smc: Scan from current RMB list when no position specified

[ Upstream commit b24aa141c2ff26c919237aee61ea1818fc6780d9 ]

When finding the first RMB of link group, it should start from the
current RMB list whose index is 0. So fix it.

Fixes: b4ba4652b3f8 ("net/smc: extend LLC layer for SMC-Rv2")
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: Return user_mss for TCP_MAXSEG in CLOSE/LISTEN state if user_mss set

[ Upstream commit 34dfde4ad87b84d21278a7e19d92b5b2c68e6c4d ]

This patch replaces the tp->mss_cache check in getting TCP_MAXSEG
with tp->rx_opt.user_mss check for CLOSE/LISTEN sock. Since
tp->mss_cache is initialized with TCP_MSS_DEFAULT, checking if
it's zero is probably a bug.

With this change, getting TCP_MAXSEG before connecting will return
default MSS normally, and return user_mss if user_mss is set.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Jack Yang <mingliang@linux.alibaba.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/netdev/CANn89i+3kL9pYtkxkwxwNMzvC_w3LNUum_2=3u+UyLBmGmifHA@mail.gmail.com/#t
Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com>
Link: https://lore.kernel.org/netdev/14D45862-36EA-4076-974C-EA67513C92F6@linux.alibaba.com/
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230527040317.68247-1-cambda@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: deny tcp_disconnect() when threads are waiting

[ Upstream commit 4faeee0cf8a5d88d63cdbc3bab124fb0e6aed08c ]

Historically connect(AF_UNSPEC) has been abused by syzkaller
and other fuzzers to trigger various bugs.

A recent one triggers a divide-by-zero [1], and Paolo Abeni
was able to diagnose the issue.

tcp_recvmsg_locked() has tests about sk_state being not TCP_LISTEN
and TCP REPAIR mode being not used.

Then later if socket lock is released in sk_wait_data(),
another thread can call connect(AF_UNSPEC), then make this
socket a TCP listener.

When recvmsg() is resumed, it can eventually call tcp_cleanup_rbuf()
and attempt a divide by 0 in tcp_rcv_space_adjust() [1]

This patch adds a new socket field, counting number of threads
blocked in sk_wait_event() and inet_wait_for_connect().

If this counter is not zero, tcp_disconnect() returns an error.

This patch adds code in blocking socket system calls, thus should
not hurt performance of non blocking ones.

Note that we probably could revert commit 499350a5a6e7 ("tcp:
initialize rcv_mss to TCP_MIN_MSS instead of 0") to restore
original tcpi_rcv_mss meaning (was 0 if no payload was ever
received on a socket)

[1]
divide error: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 13832 Comm: syz-executor.5 Not tainted 6.3.0-rc4-syzkaller-00224-g00c7b5f4ddc5 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023
RIP: 0010:tcp_rcv_space_adjust+0x36e/0x9d0 net/ipv4/tcp_input.c:740
Code: 00 00 00 00 fc ff df 4c 89 64 24 48 8b 44 24 04 44 89 f9 41 81 c7 80 03 00 00 c1 e1 04 44 29 f0 48 63 c9 48 01 e9 48 0f af c1 <49> f7 f6 48 8d 04 41 48 89 44 24 40 48 8b 44 24 30 48 c1 e8 03 48
RSP: 0018:ffffc900033af660 EFLAGS: 00010206
RAX: 4a66b76cbade2c48 RBX: ffff888076640cc0 RCX: 00000000c334e4ac
RDX: 0000000000000000 RSI: dffffc0000000000 RDI: 0000000000000001
RBP: 00000000c324e86c R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8880766417f8
R13: ffff888028fbb980 R14: 0000000000000000 R15: 0000000000010344
FS: 00007f5bffbfe700(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b32f25000 CR3: 000000007ced0000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
tcp_recvmsg_locked+0x100e/0x22e0 net/ipv4/tcp.c:2616
tcp_recvmsg+0x117/0x620 net/ipv4/tcp.c:2681
inet6_recvmsg+0x114/0x640 net/ipv6/af_inet6.c:670
sock_recvmsg_nosec net/socket.c:1017 [inline]
sock_recvmsg+0xe2/0x160 net/socket.c:1038
____sys_recvmsg+0x210/0x5a0 net/socket.c:2720
___sys_recvmsg+0xf2/0x180 net/socket.c:2762
do_recvmmsg+0x25e/0x6e0 net/socket.c:2856
__sys_recvmmsg net/socket.c:2935 [inline]
__do_sys_recvmmsg net/socket.c:2958 [inline]
__se_sys_recvmmsg net/socket.c:2951 [inline]
__x64_sys_recvmmsg+0x20f/0x260 net/socket.c:2951
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f5c0108c0f9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f5bffbfe168 EFLAGS: 00000246 ORIG_RAX: 000000000000012b
RAX: ffffffffffffffda RBX: 00007f5c011ac050 RCX: 00007f5c0108c0f9
RDX: 0000000000000001 RSI: 0000000020000bc0 RDI: 0000000000000003
RBP: 00007f5c010e7b39 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000122 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f5c012cfb1f R14: 00007f5bffbfe300 R15: 0000000000022000
</TASK>

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: Paolo Abeni <pabeni@redhat.com>
Diagnosed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20230526163458.2880232-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

af_packet: do not use READ_ONCE() in packet_bind()

[ Upstream commit 6ffc57ea004234d9373c57b204fd10370a69f392 ]

A recent patch added READ_ONCE() in packet_bind() and packet_bind_spkt()

This is better handled by reading pkt_sk(sk)->num later
in packet_do_bind() while appropriate lock is held.

READ_ONCE() in writers are often an evidence of something being wrong.

Fixes: 822b5a1c17df ("af_packet: Fix data-races of pkt_sk(sk)->num.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230526154342.2533026-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/irdma: Fix Local Invalidate fencing

[ Upstream commit 5842d1d9c1b0d17e0c29eae65ae1f245f83682dd ]

If the local invalidate fence is indicated in the WR, only the read fence
is currently being set in WQE. Fix this to set both the read and local
fence in the WQE.

Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Link: https://lore.kernel.org/r/20230522155654.1309-4-shiraz.saleem@intel.com
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/irdma: Prevent QP use after free

[ Upstream commit c8f304d75f6c6cc679a73f89591f9a915da38f09 ]

There is a window where the poll cq may use a QP that has been freed.
This can happen if a CQE is polled before irdma_clean_cqes() can clear the
CQE's related to the QP and the destroy QP races to free the QP memory.
then the QP structures are used in irdma_poll_cq.  Fix this by moving the
clearing of CQE's before the reference is removed and the QP is destroyed.

Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Link: https://lore.kernel.org/r/20230522155654.1309-3-shiraz.saleem@intel.com
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: ingenic: fix empty stub helper definitions

[ Upstream commit 650a8884a364ff2568b51cde9009cfd43cdae6ad ]

A few functions provide an empty interface definition when
CONFIG_MTD_NAND_INGENIC_ECC is disabled, but they are accidentally
defined as global functions in the header:

drivers/mtd/nand/raw/ingenic/ingenic_ecc.h:39:5: error: no previous prototype for 'ingenic_ecc_calculate'
drivers/mtd/nand/raw/ingenic/ingenic_ecc.h:46:5: error: no previous prototype for 'ingenic_ecc_correct'
drivers/mtd/nand/raw/ingenic/ingenic_ecc.h:53:6: error: no previous prototype for 'ingenic_ecc_release'
drivers/mtd/nand/raw/ingenic/ingenic_ecc.h:57:21: error: no previous prototype for 'of_ingenic_ecc_get'

Turn them into 'static inline' definitions instead.

Fixes: 15de8c6efd0e ("mtd: rawnand: ingenic: Separate top-level and SoC specific code")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230516202133.559488-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf ftrace latency: Remove unnecessary "--" from --use-nsec option

[ Upstream commit 8d73259ef23f449329294dc187932f7470268126 ]

The option name should not have the dashes.  Current version shows four
dashes for the option.

  $ perf ftrace latency -h

   Usage: perf ftrace [<options>] [<command>]
      or: perf ftrace [<options>] -- [<command>] [<options>]
      or: perf ftrace {trace|latency} [<options>] [<command>]
      or: perf ftrace {trace|latency} [<options>] -- [<command>] [<options>]

      -b, --use-bpf         Use BPF to measure function latency
      -n, ----use-nsec      Use nano-second histogram
      -T, --trace-funcs <func>
                            Show latency of given function

Fixes: 84005bb6148618cc ("perf ftrace latency: Add -n/--use-nsec option")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230525212038.3535851-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

amd-xgbe: fix the false linkup in xgbe_phy_status

[ Upstream commit dc362e20cd6ab7a93d1b09669730c406f0910c35 ]

In the event of a change in XGBE mode, the current auto-negotiation
needs to be reset and the AN cycle needs to be re-triggerred. However,
the current code ignores the return value of xgbe_set_mode(), leading to
false information as the link is declared without checking the status
register.

Fix this by propagating the mode switch status information to
xgbe_phy_status().

Fixes: e57f7a3feaef ("amd-xgbe: Prepare for working with more than one type of phy")
Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tls: improve lockless access safety of tls_err_abort()

[ Upstream commit 8a0d57df8938e9fd2e99d47a85b7f37d86f91097 ]

Most protos' poll() methods insert a memory barrier between
writes to sk_err and sk_error_report(). This dates back to
commit a4d258036ed9 ("tcp: Fix race in tcp_poll").

I guess we should do the same thing in TLS, tcp_poll() does
not hold the socket lock.

Fixes: 3c4d7559159b ("tls: kernel TLS support")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

af_packet: Fix data-races of pkt_sk(sk)->num.

[ Upstream commit 822b5a1c17df7e338b9f05d1cfe5764e37c7f74f ]

syzkaller found a data race of pkt_sk(sk)->num.

The value is changed under lock_sock() and po->bind_lock, so we
need READ_ONCE() to access pkt_sk(sk)->num without these locks in
packet_bind_spkt(), packet_bind(), and sk_diag_fill().

Note that WRITE_ONCE() is already added by commit c7d2ef5dd4b0
("net/packet: annotate accesses to po->bind").

BUG: KCSAN: data-race in packet_bind / packet_do_bind

write (marked) to 0xffff88802ffd1cee of 2 bytes by task 7322 on cpu 0:
 packet_do_bind+0x446/0x640 net/packet/af_packet.c:3236
 packet_bind+0x99/0xe0 net/packet/af_packet.c:3321
 __sys_bind+0x19b/0x1e0 net/socket.c:1803
 __do_sys_bind net/socket.c:1814 [inline]
 __se_sys_bind net/socket.c:1812 [inline]
 __x64_sys_bind+0x40/0x50 net/socket.c:1812
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x72/0xdc

read to 0xffff88802ffd1cee of 2 bytes by task 7318 on cpu 1:
 packet_bind+0xbf/0xe0 net/packet/af_packet.c:3322
 __sys_bind+0x19b/0x1e0 net/socket.c:1803
 __do_sys_bind net/socket.c:1814 [inline]
 __se_sys_bind net/socket.c:1812 [inline]
 __x64_sys_bind+0x40/0x50 net/socket.c:1812
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x72/0xdc

value changed: 0x0300 -> 0x0000

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 7318 Comm: syz-executor.4 Not tainted 6.3.0-13380-g7fddb5b5300c #4
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014

Fixes: 96ec6327144e ("packet: Diag core and basic socket info dumping")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230524232934.50950-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netrom: fix info-leak in nr_write_internal()

[ Upstream commit 31642e7089df8fd3f54ca7843f7ee2952978cad1 ]

Simon Kapadia reported the following issue:

<quote>

The Online Amateur Radio Community (OARC) has recently been experimenting
with building a nationwide packet network in the UK.
As part of our experimentation, we have been testing out packet on 300bps HF,
and playing with net/rom.  For HF packet at this baud rate you really need
to make sure that your MTU is relatively low; AX.25 suggests a PACLEN of 60,
and a net/rom PACLEN of 40 to go with that.
However the Linux net/rom support didn't work with a low PACLEN;
the mkiss module would truncate packets if you set the PACLEN below about 200 or so, e.g.:

Apr 19 14:00:51 radio kernel: [12985.747310] mkiss: ax1: truncating oversized transmit packet!

This didn't make any sense to me (if the packets are smaller why would they
be truncated?) so I started investigating.
I looked at the packets using ethereal, and found that many were just huge
compared to what I would expect.
A simple net/rom connection request packet had the request and then a bunch
of what appeared to be random data following it:

</quote>

Simon provided a patch that I slightly revised:
Not only we must not use skb_tailroom(), we also do
not want to count NR_NETWORK_LEN twice.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Co-Developed-by: Simon Kapadia <szymon@kapadia.pl>
Signed-off-by: Simon Kapadia <szymon@kapadia.pl>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Simon Kapadia <szymon@kapadia.pl>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230524141456.1045467-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: mellanox: mlxbf_gige: Fix skb_panic splat under memory pressure

[ Upstream commit d68cb7cf1fd0ef4287bc0ecd1ed0b6ae8e05fc70 ]

Do skb_put() after a new skb has been successfully allocated otherwise
the reused skb leads to skb_panics or incorrect packet sizes.

Fixes: f92e1869d74e ("Add Mellanox BlueField Gigabit Ethernet driver")
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230524194908.147145-1-tbogendoerfer@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Don't attach netdev profile while handling internal error

[ Upstream commit bdf274750fca17b289404ef03453c4070725302c ]

As part of switchdev mode disablement, driver changes port netdevice
profile from uplink to nic. If this process is triggered by health
recovery flow (PCI reset, for ex.) profile attach would fail because all
fw commands aborted when internal error flag is set. As a result, nic
netdevice profile is not attached and driver fails to rollback to uplink
profile, which leave driver in broken state and cause crash later.

To handle broken state do netdevice profile initialization only instead
of full attachment and release mdev resources on driver suspend as
expected. Actual netdevice attachment is done during driver load.

Fixes: c4d7eb57687f ("net/mxl5e: Add change profile method")
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: fw_tracer, Fix event handling

[ Upstream commit 341a80de2468f481b1f771683709b5649cbfe513 ]

mlx5 driver needs to parse traces with event_id inside the range of
first_string_trace and num_string_trace. However, mlx5 is parsing all
events with event_id >= first_string_trace.

Fix it by checking for the correct range.

Fixes: c71ad41ccb0c ("net/mlx5: FW tracer, events handling")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: SF, Drain health before removing device

[ Upstream commit b4646da0573fae9dfa2b8f1f10936cb6eedd7230 ]

There is no point in recovery during device removal. Also, if health
work started need to wait for it to avoid races and NULL pointer
access.

Hence, drain health WQ before removing device.

Fixes: 1958fc2f0712 ("net/mlx5: SF, Add auxiliary device driver")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Drain health before unregistering devlink

[ Upstream commit 824c8dc4a470040bf0e56ba716543839c2498d49 ]

mlx5 health mechanism is using devlink APIs, which are using devlink
notify APIs. After the cited patch, using devlink notify APIs after
devlink is unregistered triggers a WARN_ON().
Hence, drain health WQ before devlink is unregistered.

Fixes: cf530217408e ("devlink: Notify users when objects are accessible")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: Fix unused variable warning when BUILTIN_DTB is set

[ Upstream commit 33d418da6f476b15e4510e0a590062583f63cd36 ]

commit ef69d2559fe9 ("riscv: Move early dtb mapping into the fixmap
region") wrongly moved the #ifndef CONFIG_BUILTIN_DTB surrounding the pa
variable definition in create_fdt_early_page_table(), so move it back to
its right place to quiet the following warning:

../arch/riscv/mm/init.c: In function ‘create_fdt_early_page_table’:
../arch/riscv/mm/init.c:925:12: warning: unused variable ‘pa’ [-Wunused-variable]
  925 |  uintptr_t pa = dtb_pa & ~(PMD_SIZE - 1);

Fixes: ef69d2559fe9 ("riscv: Move early dtb mapping into the fixmap region")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230519131311.391960-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: pl330: rename _start to prevent build error

[ Upstream commit a1a5f2c887252dec161c1e12e04303ca9ba56fa9 ]

"_start" is used in several arches and proably should be reserved
for ARCH usage. Using it in a driver for a private symbol can cause
a build error when it conflicts with ARCH usage of the same symbol.

Therefore rename pl330's "_start" to "pl330_start_thread" so that there
is no conflict and no build error.

drivers/dma/pl330.c:1053:13: error: '_start' redeclared as different kind of symbol
 1053 | static bool _start(struct pl330_thread *thrd)
      |             ^~~~~~
In file included from ../include/linux/interrupt.h:21,
                 from ../drivers/dma/pl330.c:18:
arch/riscv/include/asm/sections.h:11:13: note: previous declaration of '_start' with type 'char[]'
   11 | extern char _start[];
      |             ^~~~~~

Fixes: b7d861d93945 ("DMA: PL330: Merge PL330 driver into drivers/dma/")
Fixes: ae43b3289186 ("ARM: 8202/1: dmaengine: pl330: Add runtime Power Management support v12")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jaswinder Singh <jassisinghbrar@gmail.com>
Cc: Boojin Kim <boojin.kim@samsung.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: dmaengine@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20230524045310.27923-1-rdunlap@infradead.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfsd: make a copy of struct iattr before calling notify_change

[ Upstream commit d53d70084d27f56bcdf5074328f2c9ec861be596 ]

notify_change can modify the iattr structure. In particular it can
end up setting ATTR_MODE when ATTR_KILL_SUID is already set, causing
a BUG() if the same iattr is passed to notify_change more than once.

Make a copy of the struct iattr before calling notify_change.

Reported-by: Zhi Li <yieli@redhat.com>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2207969
Tested-by: Zhi Li <yieli@redhat.com>
Fixes: 34b91dda7124 ("NFSD: Make nfsd4_setattr() wait before returning NFS4ERR_DELAY")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/amd: Fix up merge conflict resolution

[ Upstream commit 8ec4e2befef10c7679cd59251956a428e783c0b5 ]

Merge commit e17c6debd4b2 ("Merge branches 'arm/mediatek', 'arm/msm', 'arm/renesas', 'arm/rockchip', 'arm/smmu', 'x86/vt-d' and 'x86/amd' into next")
added amd_iommu_init_devices, amd_iommu_uninit_devices,
and amd_iommu_init_notifier back to drivers/iommu/amd/amd_iommu.h.
The only references to them are here, so clean them up.

Fixes: e17c6debd4b2 ("Merge branches 'arm/mediatek', 'arm/msm', 'arm/renesas', 'arm/rockchip', 'arm/smmu', 'x86/vt-d' and 'x86/amd' into next")
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Will Deacon <will@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20230420192013.733331-1-jsnitsel@redhat.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/amd: Handle GALog overflows

[ Upstream commit af47b0a24058e56e983881993752f88288ca6511 ]

GALog exists to propagate interrupts into all vCPUs in the system when
interrupts are marked as non running (e.g. when vCPUs aren't running). A
GALog overflow happens when there's in no space in the log to record the
GATag of the interrupt. So when the GALOverflow condition happens, the
GALog queue is processed and the GALog is restarted, as the IOMMU
manual indicates in section "2.7.4 Guest Virtual APIC Log Restart
Procedure":

| * Wait until MMIO Offset 2020h[GALogRun]=0b so that all request
|   entries are completed as circumstances allow. GALogRun must be 0b to
|   modify the guest virtual APIC log registers safely.
| * Write MMIO Offset 0018h[GALogEn]=0b.
| * As necessary, change the following values (e.g., to relocate or
| resize the guest virtual APIC event log):
|   - the Guest Virtual APIC Log Base Address Register
|      [MMIO Offset 00E0h],
|   - the Guest Virtual APIC Log Head Pointer Register
|      [MMIO Offset 2040h][GALogHead], and
|   - the Guest Virtual APIC Log Tail Pointer Register
|      [MMIO Offset 2048h][GALogTail].
| * Write MMIO Offset 2020h[GALOverflow] = 1b to clear the bit (W1C).
| * Write MMIO Offset 0018h[GALogEn] = 1b, and either set
|   MMIO Offset 0018h[GAIntEn] to enable the GA log interrupt or clear
|   the bit to disable it.

Failing to handle the GALog overflow means that none of the VFs (in any
guest) will work with IOMMU AVIC forcing the user to power cycle the
host. When handling the event it resumes the GALog without resizing
much like how it is done in the event handler overflow. The
[MMIO Offset 2020h][GALOverflow] bit might be set in status register
without the [MMIO Offset 2020h][GAInt] bit, so when deciding to poll
for GA events (to clear space in the galog), also check the overflow
bit.

[suravee: Check for GAOverflow without GAInt, toggle CONTROL_GAINT_EN]

Co-developed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20230419201154.83880-3-joao.m.martins@oracle.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Stable-dep-of: 8ec4e2befef1 ("iommu/amd: Fix up merge conflict resolution")
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/amd: Don't block updates to GATag if guest mode is on

[ Upstream commit ed8a2f4ddef2eaaf864ab1efbbca9788187036ab ]

On KVM GSI routing table updates, specially those where they have vIOMMUs
with interrupt remapping enabled (to boot >255vcpus setups without relying
on KVM_FEATURE_MSI_EXT_DEST_ID), a VMM may update the backing VF MSIs
with a new VCPU affinity.

On AMD with AVIC enabled, the new vcpu affinity info is updated via:
avic_pi_update_irte()
irq_set_vcpu_affinity()
amd_ir_set_vcpu_affinity()
amd_iommu_{de}activate_guest_mode()

Where the IRTE[GATag] is updated with the new vcpu affinity. The GATag
contains VM ID and VCPU ID, and is used by IOMMU hardware to signal KVM
(via GALog) when interrupt cannot be delivered due to vCPU is in
blocking state.

The issue is that amd_iommu_activate_guest_mode() will essentially
only change IRTE fields on transitions from non-guest-mode to guest-mode
and otherwise returns *with no changes to IRTE* on already configured
guest-mode interrupts. To the guest this means that the VF interrupts
remain affined to the first vCPU they were first configured, and guest
will be unable to issue VF interrupts and receive messages like this
from spurious interrupts (e.g. from waking the wrong vCPU in GALog):

[  167.759472] __common_interrupt: 3.34 No irq handler for vector
[  230.680927] mlx5_core 0000:00:02.0: mlx5_cmd_eq_recover:247:(pid
3122): Recovered 1 EQEs on cmd_eq
[  230.681799] mlx5_core 0000:00:02.0:
wait_func_handle_exec_timeout:1113:(pid 3122): cmd[0]: CREATE_CQ(0x400)
recovered after timeout
[  230.683266] __common_interrupt: 3.34 No irq handler for vector

Given the fact that amd_ir_set_vcpu_affinity() uses
amd_iommu_activate_guest_mode() underneath it essentially means that VCPU
affinity changes of IRTEs are nops. Fix it by dropping the check for
guest-mode at amd_iommu_activate_guest_mode(). Same thing is applicable to
amd_iommu_deactivate_guest_mode() although, even if the IRTE doesn't change
underlying DestID on the host, the VFIO IRQ handler will still be able to
poke at the right guest-vCPU.

Fixes: b9c6ff94e43a ("iommu/amd: Re-factor guest virtual APIC (de-)activation code")
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20230419201154.83880-2-joao.m.martins@oracle.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/rockchip: Fix unwind goto issue

[ Upstream commit ec014683c564fb74fc68e8f5e84691d3b3839d24 ]

Smatch complains that
drivers/iommu/rockchip-iommu.c:1306 rk_iommu_probe() warn: missing unwind goto?

The rk_iommu_probe function, after obtaining the irq value through
platform_get_irq, directly returns an error if the returned value
is negative, without releasing any resources.

Fix this by adding a new error handling label "err_pm_disable" and
use a goto statement to redirect to the error handling process. In
order to preserve the original semantics, set err to the value of irq.

Fixes: 1aa55ca9b14a ("iommu/rockchip: Move irq request past pm_runtime_enable")
Signed-off-by: Chao Wang <D202280639@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20230417030421.2777-1-D202280639@hust.edu.cn
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/bnxt_re: Fix return value of bnxt_re_process_raw_qp_pkt_rx

[ Upstream commit 0fa0d520e2a878cb4c94c4dc84395905d3f14f54 ]

bnxt_re_process_raw_qp_pkt_rx() always return 0 and ignores the return
value of bnxt_re_post_send_shadow_qp().

Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Link: https://lore.kernel.org/r/1684397461-23082-3-git-send-email-selvin.xavier@broadcom.com
Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/bnxt_re: Fix a possible memory leak

[ Upstream commit 349e3c0cf239cc01d58a1e6c749e171de014cd6a ]

Inside bnxt_qplib_create_cq(), when the check for NULL DPI fails, driver
returns directly without freeing the memory allocated inside
bnxt_qplib_alloc_init_hwq() routine.

Fixed this by moving the check for NULL DPI before invoking
bnxt_qplib_alloc_init_hwq().

Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Link: https://lore.kernel.org/r/1684397461-23082-2-git-send-email-selvin.xavier@broadcom.com
Reviewed-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: at_xdmac: fix potential Oops in at_xdmac_prep_interleaved()

[ Upstream commit 4d43acb145c363626d76f49febb4240c488cd1cf ]

There are two place if the at_xdmac_interleaved_queue_desc() fails which
could lead to a NULL dereference where "first" is NULL and we call
list_add_tail(&first->desc_node, ...).  In the first caller, the return
is not checked so add a check for that.  In the next caller, the return
is checked but if it fails on the first iteration through the loop then
it will lead to a NULL pointer dereference.

Fixes: 4e5385784e69 ("dmaengine: at_xdmac: handle numf > 1")
Fixes: 62b5cb757f1d ("dmaengine: at_xdmac: fix memory leak in interleaved mode")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/21282b66-9860-410a-83df-39c17fcf2f1b@kili.mountain
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Modify the value of long message loopback slice

[ Upstream commit 56518a603fd2bf74762d176ac980572db84a3e14 ]

Long message loopback slice is used for achieving traffic balance between
QPs. It prevents the problem that QPs with large traffic occupying the
hardware pipeline for a long time and QPs with small traffic cannot be
scheduled.

Currently, its maximum value is set to 16K, which means only after a QP
sends 16K will the second QP be scheduled. This value is too large, which
will lead to unbalanced traffic scheduling, and thus it needs to be
modified.

The setting range of the long message loopback slice is modified to be
from 1024 (the lower limit supported by hardware) to mtu. Actual testing
shows that this value can significantly reduce error in hardware traffic
scheduling.

This solution is compatible with both HIP08 and HIP09. The modified
lp_pktn_ini has a maximum value of 2 (when mtu is 256), so the range
checking code for lp_pktn_ini is no longer necessary and needs to be
deleted.

Fixes: 0e60778efb07 ("RDMA/hns: Modify the value of MAX_LP_MSG_LEN to meet hardware compatibility")
Link: https://lore.kernel.org/r/20230512092245.344442-4-huangjunxian6@hisilicon.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Fix base address table allocation

[ Upstream commit 7f3969b14f356dd65fa95b3528eb05c32e68bc06 ]

For hns, the specification of an entry like resource (E.g. WQE/CQE/EQE)
depends on BT page size, buf page size and hopnum. For user mode, the buf
page size depends on UMEM. Therefore, the actual specification is
controlled by BT page size and hopnum.

The current BT page size and hopnum are obtained from firmware. This makes
the driver inflexible and introduces unnecessary constraints.  Resource
allocation failures occur in many scenarios.

This patch will calculate whether the BT page size set by firmware is
sufficient before allocating BT, and increase the BT page size if it is
insufficient.

Fixes: 1133401412a9 ("RDMA/hns: Optimize base address table config flow for qp buffer")
Link: https://lore.kernel.org/r/20230512092245.344442-3-huangjunxian6@hisilicon.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Fix timeout attr in query qp for HIP08

[ Upstream commit 58caa2a51ad4fd21763696cc6c4defc9fc1b4b4f ]

On HIP08, the queried timeout attr is different from the timeout attr
configured by the user.

It is found by rdma-core testcase test_rdmacm_async_traffic:

======================================================================
FAIL: test_rdmacm_async_traffic (tests.test_rdmacm.CMTestCase)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "./tests/test_rdmacm.py", line 33, in test_rdmacm_async_traffic
    self.two_nodes_rdmacm_traffic(CMAsyncConnection, self.rdmacm_traffic,
  File "./tests/base.py", line 382, in two_nodes_rdmacm_traffic
    raise(res)
AssertionError

Fixes: 926a01dc000d ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/20230512092245.344442-2-huangjunxian6@hisilicon.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/efa: Fix unsupported page sizes in device

[ Upstream commit 866422cdddcdf59d8c68e9472d49ba1be29b5fcf ]

Device uses 4KB size blocks for user pages indirect list while the
driver creates those blocks with the size of PAGE_SIZE of the kernel. On
kernels with PAGE_SIZE different than 4KB (ARM RHEL), this leads to a
failure on register MR with indirect list because of the miss
communication between driver and device.

Fixes: 40909f664d27 ("RDMA/efa: Add EFA verbs implementation")
Link: https://lore.kernel.org/r/20230511115103.13876-1-ynachum@amazon.com
Reviewed-by: Firas Jahjah <firasj@amazon.com>
Reviewed-by: Michael Margolin <mrgolin@amazon.com>
Signed-off-by: Yonatan Nachum <ynachum@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: amlogic: phy-meson-g12a-mipi-dphy-analog: fix CNTL2_DIF_TX_CTL0 value

[ Upstream commit b949193011540bb17cf1da7795ec42af1b875203 ]

Use the same CNTL2_DIF_TX_CTL0 value used by the vendor, it was reported
fixing timings issues.

Fixes: 2a56dc650e54 ("phy: amlogic: Add G12A Analog MIPI D-PHY driver")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v4-10-2592c29ea263@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/bnxt_re: Fix the page_size used during the MR creation

[ Upstream commit 08c7f09356e45d093d1867c7a3c6ac6526e2f98b ]

Driver populates the list of pages used for Memory region wrongly when
page size is more than system page size. This is causing a failure when
some of the applications that creates MR with page size as 2M.  Since HW
can support multiple page sizes, pass the correct page size while creating
the MR.

Also, driver need not adjust the number of pages when HW Queues are
created with user memory. It should work with the number of dma blocks
returned by ib_umem_num_dma_blocks. Fix this calculation also.

Fixes: 0c4dcd602817 ("RDMA/bnxt_re: Refactor hardware queue memory allocation")
Fixes: f6919d56388c ("RDMA/bnxt_re: Code refactor while populating user MRs")
Link: https://lore.kernel.org/r/1683484169-9539-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>