review.tizen.org Git - platform/kernel/linux-rpi.git/log

tcp: Add TIME_WAIT sockets in bhash2.

Jiri Slaby reported regression of bind() with a simple repro. [0]

The repro creates a TIME_WAIT socket and tries to bind() a new socket
with the same local address and port. Before commit 28044fc1d495 ("net:
Add a bhash2 table hashed by port and address"), the bind() failed with
-EADDRINUSE, but now it succeeds.

The cited commit should have put TIME_WAIT sockets into bhash2; otherwise,
inet_bhash2_conflict() misses TIME_WAIT sockets when validating bind()
requests if the address is not a wildcard one.

The straight option is to move sk_bind2_node from struct sock to struct
sock_common to add twsk to bhash2 as implemented as RFC. [1] However, the
binary layout change in the struct sock could affect performances moving
hot fields on different cachelines.

To avoid that, we add another TIME_WAIT list in inet_bind2_bucket and check
it while validating bind().

[0]: https://lore.kernel.org/netdev/6b971a4e-c7d8-411e-1f92-fda29b5b2fb9@kernel.org/
[1]: https://lore.kernel.org/netdev/20221221151258.25748-2-kuniyu@amazon.com/

Fixes: 28044fc1d495 ("net: Add a bhash2 table hashed by port and address")
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/sched: fix retpoline wrapper compilation on configs without tc filters

Rudi reports a compilation failure on x86_64 when CONFIG_NET_CLS or
CONFIG_NET_CLS_ACT is not set but CONFIG_RETPOLINE is set.
A misplaced '#endif' was causing the issue.

Fixes: 7f0e810220e2 ("net/sched: add retpoline wrapper for tc")

Tested-by: Rudi Heitbaum <rudi@heitbaum.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

s390/qeth: convert sysfs snprintf to sysfs_emit

Follow the advice of the Documentation/filesystems/sysfs.rst
and show() should only use sysfs_emit() or sysfs_emit_at()
when formatting the value to be returned to user space.

Signed-off-by: Xuezhi Zhang <zhangxuezhi1@coolpad.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'r8169-fixes'

Chunhao Lin says:

====================
r8169: fix dmar pte write access is not set error

This series fixes dmar pte write access is not set error.

Chunhao Lin (2):
r8169: move rtl_wol_enable_rx() and rtl_prepare_power_down()
r8169: fix dmar pte write access is not set error

v2:
-update commit message
-adjust the code according to current kernel code
v3:
-update title and commit message
-split the patch
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

r8169: fix dmar pte write access is not set error

When close device, if wol is enabled, rx will be enabled. When open
device it will cause rx packet to be dma to the wrong memory address
after pci_set_master() and system log will show blow messages.

DMAR: DRHD: handling fault status reg 3
DMAR: [DMA Write] Request device [02:00.0] PASID ffffffff fault addr
ffdd4000 [fault reason 05] PTE Write access is not set

In this patch, driver disable tx/rx when close device. If wol is
enabled, only enable rx filter and disable rxdv_gate(if support) to
let hardware only receive packet to fifo but not to dma it.

Signed-off-by: Chunhao Lin <hau@realtek.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

r8169: move rtl_wol_enable_rx() and rtl_prepare_power_down()

There is no functional change. Moving these two functions for following
patch "r8169: fix dmar pte write access is not set error".

Signed-off-by: Chunhao Lin <hau@realtek.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'ethtool_gert_phy_stats-fixes'

Daniil Tatianin says:

====================
net/ethtool/ioctl: split ethtool_get_phy_stats into multiple helpers

This series fixes a potential NULL dereference in ethtool_get_phy_stats
while also attempting to refactor/split said function into multiple
helpers so that it's easier to reason about what's going on.

I've taken Andrew Lunn's suggestions on the previous version of this
patch and added a bit of my own.

Changes since v1:
- Remove an extra newline in the first patch
- Move WARN_ON_ONCE into the if check as it already returns the
result of the comparison
- Actually split ethtool_get_phy_stats instead of attempting to
refactor it
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net/ethtool/ioctl: split ethtool_get_phy_stats into multiple helpers

So that it's easier to follow and make sense of the branching and
various conditions.

Stats retrieval has been split into two separate functions
ethtool_get_phy_stats_phydev & ethtool_get_phy_stats_ethtool.
The former attempts to retrieve the stats using phydev & phy_ops, while
the latter uses ethtool_ops.

Actual n_stats validation & array allocation has been moved into a new
ethtool_vzalloc_stats_array helper.

This also fixes a potential NULL dereference of
ops->get_ethtool_phy_stats where it was getting called in an else branch
unconditionally without making sure it was actually present.

Found by Linux Verification Center (linuxtesting.org) with the SVACE
static analysis tool.

Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/ethtool/ioctl: remove if n_stats checks from ethtool_get_phy_stats

Now that we always early return if we don't have any stats we can remove
these checks as they're no longer necessary.

Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/ethtool/ioctl: return -EOPNOTSUPP if we have no phy stats

It's not very useful to copy back an empty ethtool_stats struct and
return 0 if we didn't actually have any stats. This also allows for
further simplification of this function in the future commits.

Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'bnxt_en-fixes'

Michael Chan says:

====================
bnxt_en: Bug fixes

This series fixes a devlink bug and several XDP related bugs. The
devlink bug causes a kernel crash on VF devices. The XDP driver
patches fix and clean up the RX XDP path and re-enable header-data
split that was disabled by mistake when adding the XDP multi-buffer
support.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_en: Fix HDS and jumbo thresholds for RX packets

The recent XDP multi-buffer feature has introduced regressions in the
setting of HDS and jumbo thresholds.  HDS was accidentally disabled in
the nornmal mode without XDP.  This patch restores jumbo HDS placement
when not in XDP mode.  In XDP multi-buffer mode, HDS should be disabled
and the jumbo threshold should be set to the usable page size in the
first page buffer.

Fixes: 32861236190b ("bnxt: change receive ring space parameters")
Reviewed-by: Mohammad Shuab Siddique <mohammad-shuab.siddique@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_en: Fix first buffer size calculations for XDP multi-buffer

The size of the first buffer is always page size, and the useable
space is the page size minus the offset and the skb_shared_info size.
Make sure SKB and XDP buf sizes match so that the skb_shared_info
is at the same offset seen from the SKB and XDP_BUF.

build_skb() should be passed PAGE_SIZE.  xdp_init_buff() should
be passed PAGE_SIZE as well.  xdp_get_shared_info_from_buff() will
automatically deduct the skb_shared_info size if the XDP buffer
has frags.  There is no need to keep bp->xdp_has_frags.

Change BNXT_PAGE_MODE_BUF_SIZE to BNXT_MAX_PAGE_MODE_MTU_SBUF
since this constant is really the MTU with ethernet header size
subtracted.

Also fix the BNXT_MAX_PAGE_MODE_MTU macro with proper parentheses.

Fixes: 32861236190b ("bnxt: change receive ring space parameters")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_en: Fix XDP RX path

The XDP program can change the starting address of the RX data buffer and
this information needs to be passed back from bnxt_rx_xdp() to
bnxt_rx_pkt() for the XDP_PASS case so that the SKB can point correctly
to the modified buffer address. Add back the data_ptr parameter to
bnxt_rx_xdp() to make this work.

Fixes: b231c3f3414c ("bnxt: refactor bnxt_rx_xdp to separate xdp_init_buff/xdp_prepare_buff")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_en: Simplify bnxt_xdp_buff_init()

bnxt_xdp_buff_init() does not modify the data_ptr or the len parameters,
so no need to pass in the addresses of these parameters.

Fixes: b231c3f3414c ("bnxt: refactor bnxt_rx_xdp to separate xdp_init_buff/xdp_prepare_buff")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_en: fix devlink port registration to netdev

We don't register a devlink port in case of a VF so
avoid setting the devlink pointer to netdev.
Also, SET_NETDEV_DEVLINK_PORT has to be moved
so that we determine whether the device is PF/VF first.

This fixes the NULL pointer dereference of devlink_port->devlink
when creating VFs:

BUG: kernel NULL pointer dereference, address: 0000000000000160
PGD 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 14 PID: 388 Comm: kworker/14:1 Kdump: loaded Not tainted 6.1.0-rc8 #5
Hardware name: Dell Inc. PowerEdge R750/06V45N, BIOS 1.3.8 08/31/2021
Workqueue: events work_for_cpu_fn
RIP: 0010:devlink_nl_port_handle_size+0xb/0x50
Code: 83 c4 10 5b 5d c3 cc cc cc cc b8 a6 ff ff ff eb de e8 c9 59 21 00 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 53 48 8b 47 20 <48> 8b a8 60 01 00 00 48 8b 45 60 48 8b 38 e8 92 90 1a 00 48 8b 7d
RSP: 0018:ff4fe5394846fcd8 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000794 RCX: 0000000000000000
RDX: ff1f129683a30a40 RSI: 0000000000000008 RDI: ff1f1296bb496188
RBP: 0000000000000334 R08: 0000000000000cc0 R09: 0000000000000000
R10: ff1f1296bb494298 R11: ffffffffffffffc0 R12: 0000000000000000
R13: 0000000000000000 R14: ff1f1296bb494000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ff1f129e5fa00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000160 CR3: 000000131f610006 CR4: 0000000000771ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
if_nlmsg_size+0x14a/0x220
rtmsg_ifinfo_build_skb+0x3c/0x100
rtmsg_ifinfo+0x9c/0xc0
register_netdevice+0x59d/0x670
register_netdev+0x1c/0x40
bnxt_init_one+0x674/0xa60 [bnxt_en]
local_pci_probe+0x42/0x80
work_for_cpu_fn+0x13/0x20
process_one_work+0x1e2/0x3b0
? rescuer_thread+0x390/0x390
worker_thread+0x1c4/0x3a0
? rescuer_thread+0x390/0x390
kthread+0xd6/0x100
? kthread_complete_and_exit+0x20/0x20

Fixes: ac73d4bf2cda ("net: make drivers to use SET_NETDEV_DEVLINK_PORT to set devlink_port")
Cc: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Kalesh Anakkur Purayil <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'rswitch-fixes'

Yoshihiro Shimoda says:

====================
net: ethernet: renesas: rswitch: Fix minor issues

This patch series is based on v6.2-rc2.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: renesas: rswitch: Fix getting mac address from device tree

To get mac address from device tree which is from each ethernet-port,
fix the first argument of of_get_ethdev_address().

Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: renesas: rswitch: Fix error path in renesas_eth_sw_probe()

If rswitch_init() returns non-zero and this driver is re-probed,
the following error happens:

renesas_eth_sw e6880000.ethernet: Unbalanced pm_runtime_enable!

So, fix error path in renesas_eth_sw_probe().

Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'netdev-doc-defaq'

Jakub Kicinski says:

====================
netdev doc de-FAQization

We have outgrown the FAQ format for our process doc.
I often find myself struggling to locate information in this doc,
because the questions do not serve well as section headers.
Reformat the document.

v2: update the headers
v1: https://lore.kernel.org/all/20221221184007.1170384-1-kuba@kernel.org/
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

docs: netdev: convert to a non-FAQ document

The netdev-FAQ document has grown over the years to the point
where finding information in it is somewhat challenging.
The length of the questions prevents readers from locating
content that's relevant at a glance.

Convert to a more standard documentation format with sections
and sub-sections rather than questions and answers.

The content edits are limited to what's necessary to change
the format, and very minor clarifications.

Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

docs: netdev: reshuffle sections in prep for de-FAQization

Subsequent changes will reformat the doc away from FAQ.
To make that more readable perform the pure section moves now.

Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

rxrpc: Fix a couple of potential use-after-frees

At the end of rxrpc_recvmsg(), if a call is found, the call is put and then
a trace line is emitted referencing that call in a couple of places - but
the call may have been deallocated by the time those traces happen.

Fix this by stashing the call debug_id in a variable and passing that to
the tracepoint rather than the call pointer.

Fixes: 849979051cbc ("rxrpc: Add a tracepoint to follow what recvmsg does")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: marvell: octeontx2: Fix uninitialized variable warning

Fix for uninitialized variable warning.

Addresses-Coverity: ("Uninitialized scalar variable")
Signed-off-by: Anuradha Weeraman <anuradha@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfc: Fix potential resource leaks

nfc_get_device() take reference for the device, add missing
nfc_put_device() to release it when not need anymore.
Also fix the style warnning by use error EOPNOTSUPP instead of
ENOTSUPP.

Fixes: 5ce3f32b5264 ("NFC: netlink: SE API implementation")
Fixes: 29e76924cf08 ("nfc: netlink: Add capability to reply to vendor_cmd with data")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: mv88e6xxx: depend on PTP conditionally

PTP hardware timestamping related objects are not linked when PTP
support for MV88E6xxx (NET_DSA_MV88E6XXX_PTP) is disabled, therefore
NET_DSA_MV88E6XXX should not depend on PTP_1588_CLOCK_OPTIONAL
regardless of NET_DSA_MV88E6XXX_PTP.

Instead, condition more strictly on how NET_DSA_MV88E6XXX_PTP's
dependencies are met, making sure that it cannot be enabled when
NET_DSA_MV88E6XXX=y and PTP_1588_CLOCK=m.

In other words, this commit allows NET_DSA_MV88E6XXX to be built-in
while PTP_1588_CLOCK is a module, as long as NET_DSA_MV88E6XXX_PTP is
prevented from being enabled.

Fixes: e5f31552674e ("ethernet: fix PTP_1588_CLOCK dependencies")
Signed-off-by: Johnny S. Lee <foss@jsl.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

qlcnic: prevent ->dcb use-after-free on qlcnic_dcb_enable() failure

adapter->dcb would get silently freed inside qlcnic_dcb_enable() in
case qlcnic_dcb_attach() would return an error, which always happens
under OOM conditions. This would lead to use-after-free because both
of the existing callers invoke qlcnic_dcb_get_info() on the obtained
pointer, which is potentially freed at that point.

Propagate errors from qlcnic_dcb_enable(), and instead free the dcb
pointer at callsite using qlcnic_dcb_free(). This also removes the now
unused qlcnic_clear_dcb_ops() helper, which was a simple wrapper around
kfree() also causing memory leaks for partially initialized dcb.

Found by Linux Verification Center (linuxtesting.org) with the SVACE
static analysis tool.

Fixes: 3c44bba1d270 ("qlcnic: Disable DCB operations from SR-IOV VFs")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: sched: fix memory leak in tcindex_set_parms

Syzkaller reports a memory leak as follows:
====================================
BUG: memory leak
unreferenced object 0xffff88810c287f00 (size 256):
  comm "syz-executor105", pid 3600, jiffies 4294943292 (age 12.990s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff814cf9f0>] kmalloc_trace+0x20/0x90 mm/slab_common.c:1046
    [<ffffffff839c9e07>] kmalloc include/linux/slab.h:576 [inline]
    [<ffffffff839c9e07>] kmalloc_array include/linux/slab.h:627 [inline]
    [<ffffffff839c9e07>] kcalloc include/linux/slab.h:659 [inline]
    [<ffffffff839c9e07>] tcf_exts_init include/net/pkt_cls.h:250 [inline]
    [<ffffffff839c9e07>] tcindex_set_parms+0xa7/0xbe0 net/sched/cls_tcindex.c:342
    [<ffffffff839caa1f>] tcindex_change+0xdf/0x120 net/sched/cls_tcindex.c:553
    [<ffffffff8394db62>] tc_new_tfilter+0x4f2/0x1100 net/sched/cls_api.c:2147
    [<ffffffff8389e91c>] rtnetlink_rcv_msg+0x4dc/0x5d0 net/core/rtnetlink.c:6082
    [<ffffffff839eba67>] netlink_rcv_skb+0x87/0x1d0 net/netlink/af_netlink.c:2540
    [<ffffffff839eab87>] netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
    [<ffffffff839eab87>] netlink_unicast+0x397/0x4c0 net/netlink/af_netlink.c:1345
    [<ffffffff839eb046>] netlink_sendmsg+0x396/0x710 net/netlink/af_netlink.c:1921
    [<ffffffff8383e796>] sock_sendmsg_nosec net/socket.c:714 [inline]
    [<ffffffff8383e796>] sock_sendmsg+0x56/0x80 net/socket.c:734
    [<ffffffff8383eb08>] ____sys_sendmsg+0x178/0x410 net/socket.c:2482
    [<ffffffff83843678>] ___sys_sendmsg+0xa8/0x110 net/socket.c:2536
    [<ffffffff838439c5>] __sys_sendmmsg+0x105/0x330 net/socket.c:2622
    [<ffffffff83843c14>] __do_sys_sendmmsg net/socket.c:2651 [inline]
    [<ffffffff83843c14>] __se_sys_sendmmsg net/socket.c:2648 [inline]
    [<ffffffff83843c14>] __x64_sys_sendmmsg+0x24/0x30 net/socket.c:2648
    [<ffffffff84605fd5>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
    [<ffffffff84605fd5>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
    [<ffffffff84800087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
====================================

Kernel uses tcindex_change() to change an existing
filter properties.

Yet the problem is that, during the process of changing,
if `old_r` is retrieved from `p->perfect`, then
kernel uses tcindex_alloc_perfect_hash() to newly
allocate filter results, uses tcindex_filter_result_init()
to clear the old filter result, without destroying
its tcf_exts structure, which triggers the above memory leak.

To be more specific, there are only two source for the `old_r`,
according to the tcindex_lookup(). `old_r` is retrieved from
`p->perfect`, or `old_r` is retrieved from `p->h`.

  * If `old_r` is retrieved from `p->perfect`, kernel uses
tcindex_alloc_perfect_hash() to newly allocate the
filter results. Then `r` is assigned with `cp->perfect + handle`,
which is newly allocated. So condition `old_r && old_r != r` is
true in this situation, and kernel uses tcindex_filter_result_init()
to clear the old filter result, without destroying
its tcf_exts structure

  * If `old_r` is retrieved from `p->h`, then `p->perfect` is NULL
according to the tcindex_lookup(). Considering that `cp->h`
is directly copied from `p->h` and `p->perfect` is NULL,
`r` is assigned with `tcindex_lookup(cp, handle)`, whose value
should be the same as `old_r`, so condition `old_r && old_r != r`
is false in this situation, kernel ignores using
tcindex_filter_result_init() to clear the old filter result.

So only when `old_r` is retrieved from `p->perfect` does kernel use
tcindex_filter_result_init() to clear the old filter result, which
triggers the above memory leak.

Considering that there already exists a tc_filter_wq workqueue
to destroy the old tcindex_data by tcindex_partial_destroy_work()
at the end of tcindex_set_parms(), this patch solves
this memory leak bug by removing this old filter result
clearing part and delegating it to the tc_filter_wq workqueue.

Note that this patch doesn't introduce any other issues. If
`old_r` is retrieved from `p->perfect`, this patch just
delegates old filter result clearing part to the
tc_filter_wq workqueue; If `old_r` is retrieved from `p->h`,
kernel doesn't reach the old filter result clearing part, so
removing this part has no effect.

[Thanks to the suggestion from Jakub Kicinski, Cong Wang, Paolo Abeni
and Dmitry Vyukov]

Fixes: b9a24bb76bf6 ("net_sched: properly handle failure case of tcf_exts_init()")
Link: https://lore.kernel.org/all/0000000000001de5c505ebc9ec59@google.com/
Reported-by: syzbot+232ebdbd36706c965ebf@syzkaller.appspotmail.com
Tested-by: syzbot+232ebdbd36706c965ebf@syzkaller.appspotmail.com
Cc: Cong Wang <cong.wang@bytedance.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'for-netdev' of git://git./linux/kernel/git/bpf/bpf

Daniel Borkmann says:

====================
The following pull-request contains BPF updates for your *net* tree.

We've added 7 non-merge commits during the last 5 day(s) which contain
a total of 11 files changed, 231 insertions(+), 3 deletions(-).

The main changes are:

1) Fix a splat in bpf_skb_generic_pop() under CHECKSUM_PARTIAL due to
   misuse of skb_postpull_rcsum(), from Jakub Kicinski with test case
   from Martin Lau.

2) Fix BPF verifier's nullness propagation when registers are of
   type PTR_TO_BTF_ID, from Hao Sun.

3) Fix bpftool build for JIT disassembler under statically built
   libllvm, from Anton Protopopov.

4) Fix warnings reported by resolve_btfids when building vmlinux
   with CONFIG_SECURITY_NETWORK disabled, from Hou Tao.

5) Minor fix up for BPF selftest gitignore, from Stanislav Fomichev.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

selftests/bpf: Add host-tools to gitignore

Shows up when cross-compiling:

HOST_SCRATCH_DIR := $(OUTPUT)/host-tools

vs

SCRATCH_DIR := $(OUTPUT)/tools
HOST_SCRATCH_DIR := $(SCRATCH_DIR)

Reported-by: John Sperbeck <jsperbeck@google.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221222213958.2302320-1-sdf@google.com

Merge branch 'net-hns3-fix-some-bug-for-hns3'

Hao Lan says:

====================
net: hns3: fix some bug for hns3

There are some bugfixes for the HNS3 ethernet driver. patch#1 fix miss
checking for rx packet. patch#2 fixes VF promisc mode not update
when mac table full bug, and patch#3 fixes a nterrupts not
initialization in VF FLR bug.
====================

Link: https://lore.kernel.org/r/20221222064343.61537-1-lanhao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: hns3: fix VF promisc mode not update when mac table full

Currently, it missed set HCLGE_VPORT_STATE_PROMISC_CHANGE
flag for VF when vport->overflow_promisc_flags changed.
So the VF won't check whether to update promisc mode in
this case. So add it.

Fixes: 1e6e76101fd9 ("net: hns3: configure promisc mode for VF asynchronously")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: hns3: fix miss L3E checking for rx packet

For device supports RXD advanced layout, the driver will
return directly if the hardware finish the checksum
calculate. It cause missing L3E checking for ip packets.
Fixes it.

Fixes: 1ddc028ac849 ("net: hns3: refactor out RX completion checksum")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: hns3: add interrupts re-initialization while doing VF FLR

Currently keep alive message between PF and VF may be lost and the VF is
unalive in PF. So the VF will not do reset during PF FLR reset process.
This would make the allocated interrupt resources of VF invalid and VF
would't receive or respond to PF any more.

So this patch adds VF interrupts re-initialization during VF FLR for VF
recovery in above cases.

Fixes: 862d969a3a4d ("net: hns3: do VF's pci re-initialization while PF doing FLR")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

atm: uapi: fix spelling typos in comments

Fix the typo of 'Unsuported' in atmbr2684.h

Signed-off-by: Rong Tao <rongtao@cestc.cn>
Link: https://lore.kernel.org/r/tencent_F1354BEC925C65EA357E741E91DF2044E805@qq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

powerpc: dts: t208x: Disable 10G on MAC1 and MAC2

There aren't enough resources to run these ports at 10G speeds. Disable
10G for these ports, reverting to the previous speed.

Fixes: 36926a7d70c2 ("powerpc: dts: t208x: Mark MAC1 and MAC2 as 10G")
Reported-by: Camelia Alexandra Groza <camelia.groza@nxp.com>
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Camelia Groza <camelia.groza@nxp.com>
Tested-by: Camelia Groza <camelia.groza@nxp.com>
Link: https://lore.kernel.org/r/20221216172937.2960054-1-sean.anderson@seco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests/bpf: check null propagation only neither reg is PTR_TO_BTF_ID

Verify that nullness information is not porpagated in the branches
of register to register JEQ and JNE operations if one of them is
PTR_TO_BTF_ID. Implement this in C level so we can use CO-RE.

Signed-off-by: Hao Sun <sunhao.th@gmail.com>
Suggested-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20221222024414.29539-2-sunhao.th@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>

bpf: fix nullness propagation for reg to reg comparisons

After befae75856ab, the verifier would propagate null information after
JEQ/JNE, e.g., if two pointers, one is maybe_null and the other is not,
the former would be marked as non-null in eq path. However, as comment
"PTR_TO_BTF_ID points to a kernel struct that does not need to be null
checked by the BPF program ... The verifier must keep this in mind and
can make no assumptions about null or non-null when doing branch ...".
If one pointer is maybe_null and the other is PTR_TO_BTF, the former is
incorrectly marked non-null. The following BPF prog can trigger a
null-ptr-deref, also see this report for more details[1]:

0: (18) r1 = map_fd         ; R1_w=map_ptr(ks=4, vs=4)
2: (79) r6 = *(u64 *)(r1 +8)    ; R6_w=bpf_map->inner_map_data
; R6 is PTR_TO_BTF_ID
; equals to null at runtime
3: (bf) r2 = r10
4: (07) r2 += -4
5: (62) *(u32 *)(r2 +0) = 0
6: (85) call bpf_map_lookup_elem#1    ; R0_w=map_value_or_null
7: (1d) if r6 == r0 goto pc+1
8: (95) exit
; from 7 to 9: R0=map_value R6=ptr_bpf_map
9: (61) r0 = *(u32 *)(r0 +0)          ; null-ptr-deref
10: (95) exit

So, make the verifier propagate nullness information for reg to reg
comparisons only if neither reg is PTR_TO_BTF_ID.

[1] https://lore.kernel.org/bpf/CACkBjsaFJwjC5oiw-1KXvcazywodwXo4zGYsRHwbr2gSG9WcSw@mail.gmail.com/T/#u

Fixes: befae75856ab ("bpf: propagate nullness information for reg to reg comparisons")
Signed-off-by: Hao Sun <sunhao.th@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221222024414.29539-1-sunhao.th@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>

bpftool: Fix linkage with statically built libllvm

Since the commit eb9d1acf634b ("bpftool: Add LLVM as default library for
disassembling JIT-ed programs") we might link the bpftool program with the
libllvm library. This works fine when a shared libllvm library is available,
but fails if we want to link bpftool with a statically built LLVM:

  [...]
  /usr/bin/ld: /usr/local/lib/libLLVMSupport.a(CrashRecoveryContext.cpp.o): in function `llvm::CrashRecoveryContextCleanup::~CrashRecoveryContextCleanup()':
  CrashRecoveryContext.cpp:(.text._ZN4llvm27CrashRecoveryContextCleanupD0Ev+0x17): undefined reference to `operator delete(void*, unsigned long)'
  /usr/bin/ld: /usr/local/lib/libLLVMSupport.a(CrashRecoveryContext.cpp.o): in function `llvm::CrashRecoveryContext::~CrashRecoveryContext()':
  CrashRecoveryContext.cpp:(.text._ZN4llvm20CrashRecoveryContextD2Ev+0xc8): undefined reference to `operator delete(void*, unsigned long)'
  [...]

So in the case of static libllvm we need to explicitly link bpftool with
required libraries, namely, libstdc++ and those provided by the `llvm-config
--system-libs` command. We can distinguish between the shared and static cases
by using the `llvm-config --shared-mode` command.

Fixes: eb9d1acf634b ("bpftool: Add LLVM as default library for disassembling JIT-ed programs")
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20221222102627.1643709-1-aspsk@isovalent.com

veth: Fix race with AF_XDP exposing old or uninitialized descriptors

When AF_XDP is used on on a veth interface the RX ring is updated in two
steps.  veth_xdp_rcv() removes packet descriptors from the FILL ring
fills them and places them in the RX ring updating the cached_prod
pointer.  Later xdp_do_flush() syncs the RX ring prod pointer with the
cached_prod pointer allowing user-space to see the recently filled in
descriptors.  The rings are intended to be SPSC, however the existing
order in veth_poll allows the xdp_do_flush() to run concurrently with
another CPU creating a race condition that allows user-space to see old
or uninitialized descriptors in the RX ring.  This bug has been observed
in production systems.

To summarize, we are expecting this ordering:

CPU 0 __xsk_rcv_zc()
CPU 0 __xsk_map_flush()
CPU 2 __xsk_rcv_zc()
CPU 2 __xsk_map_flush()

But we are seeing this order:

CPU 0 __xsk_rcv_zc()
CPU 2 __xsk_rcv_zc()
CPU 0 __xsk_map_flush()
CPU 2 __xsk_map_flush()

This occurs because we rely on NAPI to ensure that only one napi_poll
handler is running at a time for the given veth receive queue.
napi_schedule_prep() will prevent multiple instances from getting
scheduled. However calling napi_complete_done() signals that this
napi_poll is complete and allows subsequent calls to
napi_schedule_prep() and __napi_schedule() to succeed in scheduling a
concurrent napi_poll before the xdp_do_flush() has been called.  For the
veth driver a concurrent call to napi_schedule_prep() and
__napi_schedule() can occur on a different CPU because the veth xmit
path can additionally schedule a napi_poll creating the race.

The fix as suggested by Magnus Karlsson, is to simply move the
xdp_do_flush() call before napi_complete_done().  This syncs the
producer ring pointers before another instance of napi_poll can be
scheduled on another CPU.  It will also slightly improve performance by
moving the flush closer to when the descriptors were placed in the
RX ring.

Fixes: d1396004dd86 ("veth: Add XDP TX and REDIRECT")
Suggested-by: Magnus Karlsson <magnus.karlsson@gmail.com>
Signed-off-by: Shawn Bohrer <sbohrer@cloudflare.com>
Link: https://lore.kernel.org/r/20221220185903.1105011-1-sbohrer@cloudflare.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: lan966x: Fix configuration of the PCS

When the PCS was taken out of reset, we were changing by mistake also
the speed to 100 Mbit. But in case the link was going down, the link
up routine was setting correctly the link speed. If the link was not
getting down then the speed was forced to run at 100 even if the
speed was something else.
On lan966x, to set the speed link to 1G or 2.5G a value of 1 needs to be
written in DEV_CLOCK_CFG_LINK_SPEED. This is similar to the procedure in
lan966x_port_init.

The issue was reproduced using 1000base-x sfp module using the commands:
ip link set dev eth2 up
ip link addr add 10.97.10.2/24 dev eth2
ethtool -s eth2 speed 1000 autoneg off

Fixes: d28d6d2e37d1 ("net: lan966x: add port module support")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com>
Link: https://lore.kernel.org/r/20221221093315.939133-1-horatiu.vultur@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

bonding: fix lockdep splat in bond_miimon_commit()

bond_miimon_commit() is run while RTNL is held, not RCU.

WARNING: suspicious RCU usage
6.1.0-syzkaller-09671-g89529367293c #0 Not tainted
-----------------------------
drivers/net/bonding/bond_main.c:2704 suspicious rcu_dereference_check() usage!

Fixes: e95cc44763a4 ("bonding: do failover when high prio link up")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Hangbin Liu <liuhangbin@gmail.com>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Link: https://lore.kernel.org/r/20221220130831.1480888-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch 'mptcp-locking-fixes'

Mat Martineau says:

====================
mptcp: Locking fixes

Two separate locking fixes for the networking tree:

Patch 1 addresses a MPTCP fastopen error-path deadlock that was found
with syzkaller.

Patch 2 works around a lockdep false-positive between MPTCP listening and
non-listening sockets at socket destruct time.
====================

Link: https://lore.kernel.org/r/20221220195215.238353-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: fix lockdep false positive

MattB reported a lockdep splat in the mptcp listener code cleanup:

WARNING: possible circular locking dependency detected
packetdrill/14278 is trying to acquire lock:
ffff888017d868f0 ((work_completion)(&msk->work)){+.+.}-{0:0}, at: __flush_work (kernel/workqueue.c:3069)

but task is already holding lock:
ffff888017d84130 (sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_close (net/mptcp/protocol.c:2973)

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (sk_lock-AF_INET){+.+.}-{0:0}:
        __lock_acquire (kernel/locking/lockdep.c:5055)
        lock_acquire (kernel/locking/lockdep.c:466)
        lock_sock_nested (net/core/sock.c:3463)
        mptcp_worker (net/mptcp/protocol.c:2614)
        process_one_work (kernel/workqueue.c:2294)
        worker_thread (include/linux/list.h:292)
        kthread (kernel/kthread.c:376)
        ret_from_fork (arch/x86/entry/entry_64.S:312)

-> #0 ((work_completion)(&msk->work)){+.+.}-{0:0}:
        check_prev_add (kernel/locking/lockdep.c:3098)
        validate_chain (kernel/locking/lockdep.c:3217)
        __lock_acquire (kernel/locking/lockdep.c:5055)
        lock_acquire (kernel/locking/lockdep.c:466)
        __flush_work (kernel/workqueue.c:3070)
        __cancel_work_timer (kernel/workqueue.c:3160)
        mptcp_cancel_work (net/mptcp/protocol.c:2758)
        mptcp_subflow_queue_clean (net/mptcp/subflow.c:1817)
        __mptcp_close_ssk (net/mptcp/protocol.c:2363)
        mptcp_destroy_common (net/mptcp/protocol.c:3170)
        mptcp_destroy (include/net/sock.h:1495)
        __mptcp_destroy_sock (net/mptcp/protocol.c:2886)
        __mptcp_close (net/mptcp/protocol.c:2959)
        mptcp_close (net/mptcp/protocol.c:2974)
        inet_release (net/ipv4/af_inet.c:432)
        __sock_release (net/socket.c:651)
        sock_close (net/socket.c:1367)
        __fput (fs/file_table.c:320)
        task_work_run (kernel/task_work.c:181 (discriminator 1))
        exit_to_user_mode_prepare (include/linux/resume_user_mode.h:49)
        syscall_exit_to_user_mode (kernel/entry/common.c:130)
        do_syscall_64 (arch/x86/entry/common.c:87)
        entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)

other info that might help us debug this:

  Possible unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(sk_lock-AF_INET);
                                lock((work_completion)(&msk->work));
                                lock(sk_lock-AF_INET);
   lock((work_completion)(&msk->work));

  *** DEADLOCK ***

The report is actually a false positive, since the only existing lock
nesting is the msk socket lock acquired by the mptcp work.
cancel_work_sync() is invoked without the relevant socket lock being
held, but under a different (the msk listener) socket lock.

We could silence the splat adding a per workqueue dynamic lockdep key,
but that looks overkill. Instead just tell lockdep the msk socket lock
is not held around cancel_work_sync().

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/322
Fixes: 30e51b923e43 ("mptcp: fix unreleased socket in accept queue")
Reported-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: fix deadlock in fastopen error path

MatM reported a deadlock at fastopening time:

INFO: task syz-executor.0:11454 blocked for more than 143 seconds.
Tainted: G S 6.1.0-rc5-03226-gdb0157db5153 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-executor.0 state:D stack:25104 pid:11454 ppid:424 flags:0x00004006
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5191 [inline]
__schedule+0x5c2/0x1550 kernel/sched/core.c:6503
schedule+0xe8/0x1c0 kernel/sched/core.c:6579
__lock_sock+0x142/0x260 net/core/sock.c:2896
lock_sock_nested+0xdb/0x100 net/core/sock.c:3466
__mptcp_close_ssk+0x1a3/0x790 net/mptcp/protocol.c:2328
mptcp_destroy_common+0x16a/0x650 net/mptcp/protocol.c:3171
mptcp_disconnect+0xb8/0x450 net/mptcp/protocol.c:3019
__inet_stream_connect+0x897/0xa40 net/ipv4/af_inet.c:720
tcp_sendmsg_fastopen+0x3dd/0x740 net/ipv4/tcp.c:1200
mptcp_sendmsg_fastopen net/mptcp/protocol.c:1682 [inline]
mptcp_sendmsg+0x128a/0x1a50 net/mptcp/protocol.c:1721
inet6_sendmsg+0x11f/0x150 net/ipv6/af_inet6.c:663
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg+0xf7/0x190 net/socket.c:734
____sys_sendmsg+0x336/0x970 net/socket.c:2476
___sys_sendmsg+0x122/0x1c0 net/socket.c:2530
__sys_sendmmsg+0x18d/0x460 net/socket.c:2616
__do_sys_sendmmsg net/socket.c:2645 [inline]
__se_sys_sendmmsg net/socket.c:2642 [inline]
__x64_sys_sendmmsg+0x9d/0x110 net/socket.c:2642
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f5920a75e7d
RSP: 002b:00007f59201e8028 EFLAGS: 00000246 ORIG_RAX: 0000000000000133
RAX: ffffffffffffffda RBX: 00007f5920bb4f80 RCX: 00007f5920a75e7d
RDX: 0000000000000001 RSI: 0000000020002940 RDI: 0000000000000005
RBP: 00007f5920ae7593 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000020004050 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000000000b R14: 00007f5920bb4f80 R15: 00007f59201c8000
</TASK>

In the error path, tcp_sendmsg_fastopen() ends-up calling
mptcp_disconnect(), and the latter tries to close each
subflow, acquiring the socket lock on each of them.

At fastopen time, we have a single subflow, and such subflow
socket lock is already held by the called, causing the deadlock.

We already track the 'fastopen in progress' status inside the msk
socket. Use it to address the issue, making mptcp_disconnect() a
no op when invoked from the fastopen (error) path and doing the
relevant cleanup after releasing the subflow socket lock.

While at the above, rename the fastopen status bit to something
more meaningful.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/321
Fixes: fa9e57468aa1 ("mptcp: fix abba deadlock on fastopen")
Reported-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfp: fix schedule in atomic context when sync mc address

The callback `.ndo_set_rx_mode` is called in atomic context, sleep
is not allowed in the implementation. Now use workqueue mechanism
to avoid this issue.

Fixes: de6248644966 ("nfp: add support for multicast filter")
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20221220152100.1042774-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

vmxnet3: correctly report csum_level for encapsulated packet

Commit dacce2be3312 ("vmxnet3: add geneve and vxlan tunnel offload
support") added support for encapsulation offload. However, the
pathc did not report correctly the csum_level for encapsulated packet.

This patch fixes this issue by reporting correct csum level for the
encapsulated packet.

Fixes: dacce2be3312 ("vmxnet3: add geneve and vxlan tunnel offload support")
Signed-off-by: Ronak Doshi <doshir@vmware.com>
Acked-by: Peng Li <lpeng@vmware.com>
Link: https://lore.kernel.org/r/20221220202556.24421-1-doshir@vmware.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: openvswitch: release vport resources on failure

A recent commit introducing upcall packet accounting failed to properly
release the vport object when the per-cpu stats struct couldn't be
allocated. This can cause dangling pointers to dp objects long after
they've been released.

Cc: wangchuanlei <wangchuanlei@inspur.com>
Fixes: 1933ea365aa7 ("net: openvswitch: Add support to count upcall packets")
Reported-by: syzbot+8f4e2dcfcb3209ac35f9@syzkaller.appspotmail.com
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://lore.kernel.org/r/20221220212717.526780-1-aconole@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: vrf: determine the dst using the original ifindex for multicast

Multicast packets received on an interface bound to a VRF are marked as
belonging to the VRF and the skb device is updated to point to the VRF
device itself. This was fine even when a route was associated to a
device as when performing a fib table lookup 'oif' in fib6_table_lookup
(coming from 'skb->dev->ifindex' in ip6_route_input) was set to 0 when
FLOWI_FLAG_SKIP_NH_OIF was set.

With commit 40867d74c374 ("net: Add l3mdev index to flow struct and
avoid oif reset for port devices") this is not longer true and multicast
traffic is not received on the original interface.

Instead of adding back a similar check in fib6_table_lookup determine
the dst using the original ifindex for multicast VRF traffic. To make
things consistent across the function do the above for all strict
packets, which was the logic before commit 6f12fa775530 ("vrf: mark skb
for multicast or link-local as enslaved to VRF"). Note that reverting to
this behavior should be fine as the change was about marking packets
belonging to the VRF, not about their dst.

Fixes: 40867d74c374 ("net: Add l3mdev index to flow struct and avoid oif reset for port devices")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20221220171825.1172237-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ice: xsk: do not use xdp_return_frame() on tx_buf->raw_buf

Previously ice XDP xmit routine was changed in a way that it avoids
xdp_buff->xdp_frame conversion as it is simply not needed for handling
XDP_TX action and what is more it saves us CPU cycles. This routine is
re-used on ZC driver to handle XDP_TX action.

Although for XDP_TX on Rx ZC xdp_buff that comes from xsk_buff_pool is
converted to xdp_frame, xdp_frame itself is not stored inside
ice_tx_buf, we only store raw data pointer. Casting this pointer to
xdp_frame and calling against it xdp_return_frame in
ice_clean_xdp_tx_buf() results in undefined behavior.

To fix this, simply call page_frag_free() on tx_buf->raw_buf.
Later intention is to remove the buff->frame conversion in order to
simplify the codebase and improve XDP_TX performance on ZC.

Fixes: 126cdfe1007a ("ice: xsk: Improve AF_XDP ZC Tx and use batching API")
Reported-and-tested-by: Robin Cowley <robin.cowley@thehutgroup.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Piotr Raczynski <piotr.raczynski@.intel.com>
Link: https://lore.kernel.org/r/20221220175448.693999-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'wireless-2022-12-21' of git://git./linux/kernel/git/wireless/wireless

Kalle Valo says:

====================
wireless fixes for v6.2

First set of fixes for v6.2. Fix for a link error in mt76, fix for an
iwlwifi firmware crash and two cleanups.

* tag 'wireless-2022-12-21' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  wifi: ath9k: use proper statements in conditionals
  wifi: mt76: mt7996: select CONFIG_RELAY
  wifi: iwlwifi: fw: skip PPAG for JF
  wifi: ti: remove obsolete lines in the Makefile
====================

Link: https://lore.kernel.org/r/20221221180808.96A8AC433EF@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests/bpf: Test bpf_skb_adjust_room on CHECKSUM_PARTIAL

When the bpf_skb_adjust_room() shrinks the skb such that its csum_start
is invalid, the skb->ip_summed should be reset from CHECKSUM_PARTIAL to
CHECKSUM_NONE.

The commit 54c3f1a81421 ("bpf: pull before calling skb_postpull_rcsum()")
fixed it.

This patch adds a test to ensure the skb->ip_summed changed from
CHECKSUM_PARTIAL to CHECKSUM_NONE after bpf_skb_adjust_room().

Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20221221185653.1589961-1-martin.lau@linux.dev

Merge tag 'net-6.2-rc1' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, netfilter and can.

  Current release - regressions:

   - bpf: synchronize dispatcher update with bpf_dispatcher_xdp_func

   - rxrpc:
      - fix security setting propagation
      - fix null-deref in rxrpc_unuse_local()
      - fix switched parameters in peer tracing

  Current release - new code bugs:

   - rxrpc:
      - fix I/O thread startup getting skipped
      - fix locking issues in rxrpc_put_peer_locked()
      - fix I/O thread stop
      - fix uninitialised variable in rxperf server
      - fix the return value of rxrpc_new_incoming_call()

   - microchip: vcap: fix initialization of value and mask

   - nfp: fix unaligned io read of capabilities word

  Previous releases - regressions:

   - stop in-kernel socket users from corrupting socket's task_frag

   - stream: purge sk_error_queue in sk_stream_kill_queues()

   - openvswitch: fix flow lookup to use unmasked key

   - dsa: mv88e6xxx: avoid reg_lock deadlock in mv88e6xxx_setup_port()

   - devlink:
      - hold region lock when flushing snapshots
      - protect devlink dump by the instance lock

  Previous releases - always broken:

   - bpf:
      - prevent leak of lsm program after failed attach
      - resolve fext program type when checking map compatibility

   - skbuff: account for tail adjustment during pull operations

   - macsec: fix net device access prior to holding a lock

   - bonding: switch back when high prio link up

   - netfilter: flowtable: really fix NAT IPv6 offload

   - enetc: avoid buffer leaks on xdp_do_redirect() failure

   - unix: fix race in SOCK_SEQPACKET's unix_dgram_sendmsg()

   - dsa: microchip: remove IRQF_TRIGGER_FALLING in
     request_threaded_irq"

* tag 'net-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits)
  net: fec: check the return value of build_skb()
  net: simplify sk_page_frag
  Treewide: Stop corrupting socket's task_frag
  net: Introduce sk_use_task_frag in struct sock.
  mctp: Remove device type check at unregister
  net: dsa: microchip: remove IRQF_TRIGGER_FALLING in request_threaded_irq
  can: kvaser_usb: hydra: help gcc-13 to figure out cmd_len
  can: flexcan: avoid unbalanced pm_runtime_enable warning
  Documentation: devlink: add missing toc entry for etas_es58x devlink doc
  mctp: serial: Fix starting value for frame check sequence
  nfp: fix unaligned io read of capabilities word
  net: stream: purge sk_error_queue in sk_stream_kill_queues()
  myri10ge: Fix an error handling path in myri10ge_probe()
  net: microchip: vcap: Fix initialization of value and mask
  rxrpc: Fix the return value of rxrpc_new_incoming_call()
  rxrpc: rxperf: Fix uninitialised variable
  rxrpc: Fix I/O thread stop
  rxrpc: Fix switched parameters in peer tracing
  rxrpc: Fix locking issues in rxrpc_put_peer_locked()
  rxrpc: Fix I/O thread startup getting skipped
  ...

Merge tag 'fs.vfsuid.ima.v6.2-rc1' of git://git./linux/kernel/git/vfs/idmapping

Pull vfsuid cleanup from Christian Brauner:
"This moves the ima specific vfs{g,u}id_t comparison helpers out of the
  header and into the one file in ima where they are used.

  We shouldn't incentivize people to use them by placing them into the
  header. As discussed and suggested by Linus in [1] let's just define
  them locally in the one file in ima where they are used"

Link: https://lore.kernel.org/lkml/CAHk-=wj4BpEwUd=OkTv1F9uykvSrsBNZJVHMp+p_+e2kiV71_A@mail.gmail.com
* tag 'fs.vfsuid.ima.v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
  mnt_idmapping: move ima-only helpers to ima

Merge tag 'random-6.2-rc1-for-linus' of git://git./linux/kernel/git/crng/random

Pull more random number generator updates from Jason Donenfeld:
"Two remaining changes that are now possible after you merged a few
  other trees:

   - #include <asm/archrandom.h> can be removed from random.h now,
     making the direct use of the arch_random_* API more of a private
     implementation detail between the archs and random.c, rather than
     something for general consumers.

   - Two additional uses of prandom_u32_max() snuck in during the
     initial phase of pulls, so these have been converted to
     get_random_u32_below(), and now the deprecated prandom_u32_max()
     alias -- which was just a wrapper around get_random_u32_below() --
     can be removed.

  In addition, there is one fix:

   - Check efi_rt_services_supported() before attempting to use an EFI
     runtime function.

     This affected EFI systems that disable runtime services yet still
     boot via EFI (e.g. the reporter's Lenovo Thinkpad X13s laptop), as
     well systems where EFI runtime services have been forcibly
     disabled, such as on PREEMPT_RT.

     On those machines, a very early and hard to diagnose crash would
     happen, preventing boot"

* tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
  prandom: remove prandom_u32_max()
  efi: random: fix NULL-deref when refreshing seed
  random: do not include <asm/archrandom.h> from random.h

Merge tag 'rcu-urgent.2022.12.17a' of git://git./linux/kernel/git/paulmck/linux-rcu

Pull RCU fix from Paul McKenney:
"This fixes a lockdep false positive in synchronize_rcu() that can
  otherwise occur during early boot.

  The fix simply avoids invoking lockdep if the scheduler has not yet
  been initialized, that is, during that portion of boot when interrupts
  are disabled"

* tag 'rcu-urgent.2022.12.17a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  rcu: Don't assert interrupts enabled too early in boot

bpf: pull before calling skb_postpull_rcsum()

Anand hit a BUG() when pulling off headers on egress to a SW tunnel.
We get to skb_checksum_help() with an invalid checksum offset
(commit d7ea0d9df2a6 ("net: remove two BUG() from skb_checksum_help()")
converted those BUGs to WARN_ONs()).
He points out oddness in how skb_postpull_rcsum() gets used.
Indeed looks like we should pull before "postpull", otherwise
the CHECKSUM_PARTIAL fixup from skb_postpull_rcsum() will not
be able to do its job:

if (skb->ip_summed == CHECKSUM_PARTIAL &&
skb_checksum_start_offset(skb) < 0)
skb->ip_summed = CHECKSUM_NONE;

Reported-by: Anand Parthasarathy <anpartha@meta.com>
Fixes: 6578171a7ff0 ("bpf: add bpf_skb_change_proto helper")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20221220004701.402165-1-kuba@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>

net: fec: check the return value of build_skb()

The build_skb might return a null pointer but there is no check on the
return value in the fec_enet_rx_queue(). So a null pointer dereference
might occur. To avoid this, we check the return value of build_skb. If
the return value is a null pointer, the driver will recycle the page and
update the statistic of ndev. Then jump to rx_processing_done to clear
the status flags of the BD so that the hardware can recycle the BD.

Fixes: 95698ff6177b ("net: fec: using page pool to manage RX buffers")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Shenwei Wang <Shenwei.wang@nxp.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20221219022755.1047573-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'm68knommu-for-v6.2' of git://git./linux/kernel/git/gerg/m68knommu

Pull m68knommu update from Greg Ungerer:
"Only a single change to use the safer strscpy() instead of strncpy()
when setting up the cmdline"

* tag 'm68knommu-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: use strscpy() to instead of strncpy()

Merge tag 'spdx-6.2-rc1' of git://git./linux/kernel/git/gregkh/spdx

Pull SPDX/License additions from Greg KH:
"Here are two small updates for LICENSES and some kernel files that add
  the Copyleft-next license and use it in a SPDX tag as a dual-license
  for some kernel files.

  These have been discussed thoroughly in public on the linux-spdx
  mailing list, and have the needed acks on them, as well as having been
  in linux-next with no reported issues for quite some time"

* tag 'spdx-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
  testing: use the copyleft-next-0.3.1 SPDX tag
  LICENSES: Add the copyleft-next-0.3.1 license

Merge tag 'devicetree-for-6.2-2' of git://git./linux/kernel/git/robh/linux

Pull more devicetree updates from Rob Herring:
"This is mostly a treewide clean-up from Krzysztof. There's also a
  couple of fixes and things that fell thru the cracks.

  I must say this has been a nice merge window without bindings dumped
  in at the last minute introducing warnings.

  Summary:

   - Treewide dropping of redundant 'binding' or 'schema' from schema
     titles. This will be followed up with a automated check to catch
     these.

   - Re-sort vendor-prefies

   - Convert GPIO based watchdog to schema

   - Handle all the variations for clocks, resets, power domains in i.MX
     PCIe binding

   - Document missing 'power-domains' property in mxsfb

   - Fix error with path references in Tegra XUSB example

   - Honor CONFIG_CMDLINE* even without /chosen node"

* tag 'devicetree-for-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: drop redundant part of title (manual)
  dt-bindings: clock: drop redundant part of title
  dt-bindings: drop redundant part of title (beginning)
  dt-bindings: drop redundant part of title (end, part three)
  dt-bindings: drop redundant part of title (end, part two)
  dt-bindings: drop redundant part of title (end)
  dt-bindings: clock: st,stm32mp1-rcc: add proper title
  dt-bindings: memory-controllers: ti,gpmc-child: drop redundant part of title
  dt-bindings: drop redundant part of title of shared bindings
  dt-bindings: watchdog: gpio: Convert bindings to YAML
  dt-bindings: imx6q-pcie: Handle more resets on legacy platforms
  dt-bindings: imx6q-pcie: Handle various PD configurations
  dt-bindings: imx6q-pcie: Handle various clock configurations
  dt-bindings: hwmon: ntc-thermistor: drop Naveen Krishna Chatradhi from maintainers
  dt-bindings: mxsfb: Document i.MX8M/i.MX6SX/i.MX6SL power-domains property
  dt-bindings: vendor-prefixes: sort entries alphabetically
  dt-bindings: usb: tegra-xusb: Remove path references
  of: fdt: Honor CONFIG_CMDLINE* even without /chosen node

Merge tag 'parisc-for-6.2-1' of git://git./linux/kernel/git/deller/parisc-linux

Pull parisc updates from Helge Deller:
"There is one noteable patch, which allows the parisc kernel to use the
  same MADV_xxx constants as the other architectures going forward. With
  that change only alpha has one entry left (MADV_DONTNEED is 6 vs 4 on
  others) which is different. To prevent an ABI breakage, a wrapper is
  included which translates old MADV values to the new ones, so existing
  userspace isn't affected. Reason for that patch is, that some
  applications wrongly used the standard MADV_xxx values even on some
  non-x86 platforms and as such those programs failed to run correctly
  on parisc (examples are qemu-user, tor browser and boringssl).

  Then the kgdb console and the LED code received some fixes, and some
  0-day warnings are now gone. Finally, the very last compile warning
  which was visible during a kernel build is now fixed too (in the vDSO
  code).

  The majority of the patches are tagged for stable series and in
  summary this patchset is quite small and drops more code than it adds:

Fixes:
   - Fix potential null-ptr-deref in start_task()
   - Fix kgdb console on serial port
   - Add missing FORCE prerequisites in Makefile
   - Drop PMD_SHIFT from calculation in pgtable.h

  Enhancements:
   - Implement a wrapper to align madvise() MADV_* constants with other
     architectures
   - If machine supports running MPE/XL, show the MPE model string

  Cleanups:
   - Drop duplicate kgdb console code
   - Indenting fixes in setup_cmdline()"

* tag 'parisc-for-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Show MPE/iX model string at bootup
  parisc: Add missing FORCE prerequisites in Makefile
  parisc: Move pdc_result struct to firmware.c
  parisc: Drop locking in pdc console code
  parisc: Drop duplicate kgdb_pdc console
  parisc: Fix locking in pdc_iodc_print() firmware call
  parisc: Drop PMD_SHIFT from calculation in pgtable.h
  parisc: Align parisc MADV_XXX constants with all other architectures
  parisc: led: Fix potential null-ptr-deref in start_task()
  parisc: Fix inconsistent indenting in setup_cmdline()

Merge tag 'asm-generic-6.2-1' of git://git./linux/kernel/git/arnd/asm-generic

Pull asm-generic updates from Arnd Bergmann:
"There are only three fairly simple patches.

  The #include change to linux/swab.h addresses a userspace build issue,
  and the change to the mmio tracing logic helps provide more useful
  traces"

* tag 'asm-generic-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  uapi: Add missing _UAPI prefix to <asm-generic/types.h> include guard
  asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info
  include/uapi/linux/swab: Fix potentially missing __always_inline

wifi: ath9k: use proper statements in conditionals

A previous cleanup patch accidentally broke some conditional
expressions by replacing the safe "do {} while (0)" constructs
with empty macros. gcc points this out when extra warnings
are enabled:

drivers/net/wireless/ath/ath9k/hif_usb.c: In function 'ath9k_skb_queue_complete':
drivers/net/wireless/ath/ath9k/hif_usb.c:251:57: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body]
251 | TX_STAT_INC(hif_dev, skb_failed);

Make both sets of macros proper expressions again.

Fixes: d7fc76039b74 ("ath9k: htc: clean up statistics macros")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221215165553.1950307-1-arnd@kernel.org

wifi: mt76: mt7996: select CONFIG_RELAY

Without CONFIG_RELAY, the driver fails to link:

ERROR: modpost: "relay_flush" [drivers/net/wireless/mediatek/mt76/mt7996/mt7996e.ko] undefined!
ERROR: modpost: "relay_switch_subbuf" [drivers/net/wireless/mediatek/mt76/mt7996/mt7996e.ko] undefined!
ERROR: modpost: "relay_open" [drivers/net/wireless/mediatek/mt76/mt7996/mt7996e.ko] undefined!
ERROR: modpost: "relay_reset" [drivers/net/wireless/mediatek/mt76/mt7996/mt7996e.ko] undefined!
ERROR: modpost: "relay_file_operations" [drivers/net/wireless/mediatek/mt76/mt7996/mt7996e.ko] undefined!

The same change was done in mt7915 for the corresponding copy of the code.

Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
See-also: 988845c9361a ("mt76: mt7915: add support for passing chip/firmware debug data to user space")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221215163133.4152299-1-arnd@kernel.org

wifi: iwlwifi: fw: skip PPAG for JF

For JF RFs we don't support PPAG, but many firmware
images lie about it. Always skip support for JF to
avoid firmware errors when sending the command.

Reported-and-tested-by: Íñigo Huguet <ihuguet@redhat.com>
Link: https://lore.kernel.org/linux-wireless/CACT4oufQsqHGp6bah2c4+jPn2wG1oZqY=UKa_TmPx=F6Lxng8Q@mail.gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221213225723.2a43415d8990.I9ac210740a45b41f1b2e15274e1daf4284f2808a@changeid

prandom: remove prandom_u32_max()

Convert the final two users of prandom_u32_max() that slipped in during
6.2-rc1 to use get_random_u32_below().

Then, with no more users left, we can finally remove the deprecated
function.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

efi: random: fix NULL-deref when refreshing seed

Do not try to refresh the RNG seed in case the firmware does not support
setting variables.

This is specifically needed to prevent a NULL-pointer dereference on the
Lenovo X13s with some firmware revisions, or more generally, whenever
the runtime services have been disabled (e.g. efi=noruntime or with
PREEMPT_RT).

Fixes: e7b813b32a42 ("efi: random: refresh non-volatile random seed when RNG is initialized")
Reported-by: Steev Klimaszewski <steev@kali.org>
Reported-by: Bjorn Andersson <andersson@kernel.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

random: do not include <asm/archrandom.h> from random.h

The <asm/archrandom.h> header is a random.c private detail, not
something to be called by other code. As such, don't make it
automatically available by way of random.h.

Cc: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

Merge tag 'linux-can-fixes-for-6.2-20221219' of git://git./linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2022-12-19

The first patch is by Vincent Mailhol and adds the etas_es58x
devlink documentation to the index.

Haibo Chen's patch for the flexcan driver fixes a unbalanced
pm_runtime_enable warning.

The last patch is by me, targets the kvaser_usb driver and fixes
an error occurring with gcc-13.

* tag 'linux-can-fixes-for-6.2-20221219' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
  can: kvaser_usb: hydra: help gcc-13 to figure out cmd_len
  can: flexcan: avoid unbalanced pm_runtime_enable warning
  Documentation: devlink: add missing toc entry for etas_es58x devlink doc
====================

Link: https://lore.kernel.org/r/20221219155210.1143439-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'stop-corrupting-socket-s-task_frag'

Benjamin Coddington says:

====================
Stop corrupting socket's task_frag

The networking code uses flags in sk_allocation to determine if it can use
current->task_frag, however in-kernel users of sockets may stop setting
sk_allocation when they convert to the preferred memalloc_nofs_save/restore,
as SUNRPC has done in commit a1231fda7e94 ("SUNRPC: Set memalloc_nofs_save()
on all rpciod/xprtiod jobs").

This will cause corruption in current->task_frag when recursing into the
network layer for those subsystems during page fault or reclaim.  The
corruption is difficult to diagnose because stack traces may not contain the
offending subsystem at all.  The corruption is unlikely to show up in
testing because it requires memory pressure, and so subsystems that
convert to memalloc_nofs_save/restore are likely to continue to run into
this issue.

Previous reports and proposed fixes:
https://lore.kernel.org/netdev/96a18bd00cbc6cb554603cc0d6ef1c551965b078.1663762494.git.gnault@redhat.com/
https://lore.kernel.org/netdev/b4d8cb09c913d3e34f853736f3f5628abfd7f4b6.1656699567.git.gnault@redhat.com/
https://lore.kernel.org/linux-nfs/de6d99321d1dcaa2ad456b92b3680aa77c07a747.1665401788.git.gnault@redhat.com/

Guilluame Nault has done all of the hard work tracking this problem down and
finding the best fix for this issue.  I'm just taking a turn posting another
fix.
====================

Link: https://lore.kernel.org/r/cover.1671194454.git.bcodding@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: simplify sk_page_frag

Now that in-kernel socket users that may recurse during reclaim have benn
converted to sk_use_task_frag = false, we can have sk_page_frag() simply
check that value.

Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Treewide: Stop corrupting socket's task_frag

Since moving to memalloc_nofs_save/restore, SUNRPC has stopped setting the
GFP_NOIO flag on sk_allocation which the networking system uses to decide
when it is safe to use current->task_frag.  The results of this are
unexpected corruption in task_frag when SUNRPC is involved in memory
reclaim.

The corruption can be seen in crashes, but the root cause is often
difficult to ascertain as a crashing machine's stack trace will have no
evidence of being near NFS or SUNRPC code.  I believe this problem to
be much more pervasive than reports to the community may indicate.

Fix this by having kernel users of sockets that may corrupt task_frag due
to reclaim set sk_use_task_frag = false.  Preemptively correcting this
situation for users that still set sk_allocation allows them to convert to
memalloc_nofs_save/restore without the same unexpected corruptions that are
sure to follow, unlikely to show up in testing, and difficult to bisect.

CC: Philipp Reisner <philipp.reisner@linbit.com>
CC: Lars Ellenberg <lars.ellenberg@linbit.com>
CC: "Christoph Böhmwalder" <christoph.boehmwalder@linbit.com>
CC: Jens Axboe <axboe@kernel.dk>
CC: Josef Bacik <josef@toxicpanda.com>
CC: Keith Busch <kbusch@kernel.org>
CC: Christoph Hellwig <hch@lst.de>
CC: Sagi Grimberg <sagi@grimberg.me>
CC: Lee Duncan <lduncan@suse.com>
CC: Chris Leech <cleech@redhat.com>
CC: Mike Christie <michael.christie@oracle.com>
CC: "James E.J. Bottomley" <jejb@linux.ibm.com>
CC: "Martin K. Petersen" <martin.petersen@oracle.com>
CC: Valentina Manea <valentina.manea.m@gmail.com>
CC: Shuah Khan <shuah@kernel.org>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: David Howells <dhowells@redhat.com>
CC: Marc Dionne <marc.dionne@auristor.com>
CC: Steve French <sfrench@samba.org>
CC: Christine Caulfield <ccaulfie@redhat.com>
CC: David Teigland <teigland@redhat.com>
CC: Mark Fasheh <mark@fasheh.com>
CC: Joel Becker <jlbec@evilplan.org>
CC: Joseph Qi <joseph.qi@linux.alibaba.com>
CC: Eric Van Hensbergen <ericvh@gmail.com>
CC: Latchesar Ionkov <lucho@ionkov.net>
CC: Dominique Martinet <asmadeus@codewreck.org>
CC: Ilya Dryomov <idryomov@gmail.com>
CC: Xiubo Li <xiubli@redhat.com>
CC: Chuck Lever <chuck.lever@oracle.com>
CC: Jeff Layton <jlayton@kernel.org>
CC: Trond Myklebust <trond.myklebust@hammerspace.com>
CC: Anna Schumaker <anna@kernel.org>
CC: Steffen Klassert <steffen.klassert@secunet.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: Introduce sk_use_task_frag in struct sock.

Sockets that can be used while recursing into memory reclaim, like
those used by network block devices and file systems, mustn't use
current->task_frag: if the current process is already using it, then
the inner memory reclaim call would corrupt the task_frag structure.

To avoid this, sk_page_frag() uses ->sk_allocation to detect sockets
that mustn't use current->task_frag, assuming that those used during
memory reclaim had their allocation constraints reflected in
->sk_allocation.

This unfortunately doesn't cover all cases: in an attempt to remove all
usage of GFP_NOFS and GFP_NOIO, sunrpc stopped setting these flags in
->sk_allocation, and used memalloc_nofs critical sections instead.
This breaks the sk_page_frag() heuristic since the allocation
constraints are now stored in current->flags, which sk_page_frag()
can't read without risking triggering a cache miss and slowing down
TCP's fast path.

This patch creates a new field in struct sock, named sk_use_task_frag,
which sockets with memory reclaim constraints can set to false if they
can't safely use current->task_frag. In such cases, sk_page_frag() now
always returns the socket's page_frag (->sk_frag). The first user is
sunrpc, which needs to avoid using current->task_frag but can keep
->sk_allocation set to GFP_KERNEL otherwise.

Eventually, it might be possible to simplify sk_page_frag() by only
testing ->sk_use_task_frag and avoid relying on the ->sk_allocation
heuristic entirely (assuming other sockets will set ->sk_use_task_frag
according to their constraints in the future).

The new ->sk_use_task_frag field is placed in a hole in struct sock and
belongs to a cache line shared with ->sk_shutdown. Therefore it should
be hot and shouldn't have negative performance impacts on TCP's fast
path (sk_shutdown is tested just before the while() loop in
tcp_sendmsg_locked()).

Link: https://lore.kernel.org/netdev/b4d8cb09c913d3e34f853736f3f5628abfd7f4b6.1656699567.git.gnault@redhat.com/
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mctp: Remove device type check at unregister

The unregister check could be incorrectly triggered if a netdev
changes its type after register. That is possible for a tun device
using TUNSETLINK ioctl, resulting in mctp unregister failing
and the netdev unregister waiting forever.

This was encountered by https://github.com/openthread/openthread/issues/8523

Neither check at register or unregister is required. They were added in
an attempt to track down mctp_ptr being set unexpectedly, which should
not happen in normal operation.

Fixes: 7b1871af75f3 ("mctp: Warn if pointer is set for a wrong dev type")
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20221215054933.2403401-1-matt@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: microchip: remove IRQF_TRIGGER_FALLING in request_threaded_irq

KSZ swithes used interrupts for detecting the phy link up and down.
During registering the interrupt handler, it used IRQF_TRIGGER_FALLING
flag. But this flag has to be retrieved from device tree instead of hard
coding in the driver, so removing the flag.

Fixes: ff319a644829 ("net: dsa: microchip: move interrupt handling logic from lan937x to ksz_common")
Reported-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Link: https://lore.kernel.org/r/20221213101440.24667-1-arun.ramadoss@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'soc-fixes-6.2-1' of git://git./linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
"These are a couple of build fixes from randconfig testing, plus a set
  of Mediatek SoC specific fixes, all trivial"

* tag 'soc-fixes-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  soc: tegra: fix CPU_BIG_ENDIAN dependencies
  ARM: disallow pre-ARMv5 builds with ld.lld
  ARM: pxa: fix building with clang
  MAINTAINERS: add related dts to IXP4xx
  ARM: dts: spear: drop 0x from unit address
  arm64: dts: mt8183: Fix Mali GPU clock
  arm64: dts: mediatek: mt8195-demo: fix the memory size of node secmon
  soc: mediatek: pm-domains: Fix the power glitch issue

bpf: Define sock security related BTF IDs under CONFIG_SECURITY_NETWORK

There are warnings reported from resolve_btfids when building vmlinux
with CONFIG_SECURITY_NETWORK disabled:

WARN: resolve_btfids: unresolved symbol bpf_lsm_sk_free_security
WARN: resolve_btfids: unresolved symbol bpf_lsm_sk_alloc_security

So only define BTF IDs for these LSM hooks when CONFIG_SECURITY_NETWORK
is enabled.

Fixes: c0c852dd1876 ("bpf: Do not mark certain LSM hook arguments as trusted")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20221217062144.2507222-1-houtao@huaweicloud.com

Merge tag 'kbuild-v6.2' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

- Support zstd-compressed debug info

- Allow W=1 builds to detect objects shared among multiple modules

- Add srcrpm-pkg target to generate a source RPM package

- Make the -s option detection work for future GNU Make versions

- Add -Werror to KBUILD_CPPFLAGS when CONFIG_WERROR=y

- Allow W=1 builds to detect -Wundef warnings in any preprocessed files

- Raise the minimum supported version of binutils to 2.25

- Use $(intcmp ...) to compare integers if GNU Make >= 4.4 is used

- Use $(file ...) to read a file if GNU Make >= 4.2 is used

- Print error if GNU Make older than 3.82 is used

- Allow modpost to detect section mismatches with Clang LTO

- Include vmlinuz.efi into kernel tarballs for arm64 CONFIG_EFI_ZBOOT=y

* tag 'kbuild-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (29 commits)
  buildtar: fix tarballs with EFI_ZBOOT enabled
  modpost: Include '.text.*' in TEXT_SECTIONS
  padata: Mark padata_work_init() as __ref
  kbuild: ensure Make >= 3.82 is used
  kbuild: refactor the prerequisites of the modpost rule
  kbuild: change module.order to list *.o instead of *.ko
  kbuild: use .NOTINTERMEDIATE for future GNU Make versions
  kconfig: refactor Makefile to reduce process forks
  kbuild: add read-file macro
  kbuild: do not sort after reading modules.order
  kbuild: add test-{ge,gt,le,lt} macros
  Documentation: raise minimum supported version of binutils to 2.25
  kbuild: add -Wundef to KBUILD_CPPFLAGS for W=1 builds
  kbuild: move -Werror from KBUILD_CFLAGS to KBUILD_CPPFLAGS
  kbuild: Port silent mode detection to future gnu make.
  init/version.c: remove #include <generated/utsrelease.h>
  firmware_loader: remove #include <generated/utsrelease.h>
  modpost: Mark uuid_le type to be suitable only for MEI
  kbuild: add ability to make source rpm buildable using koji
  kbuild: warn objects shared among multiple modules
  ...

Merge tag 'zstd-linus-v6.2' of https://github.com/terrelln/linux

Pull zstd updates from Nick Terrell:
"Update the kernel to upstream zstd v1.5.2 [0]. Specifically to the tag
  v1.5.2-kernel [1] which includes several cherrypicked fixes for the
  kernel on top of v1.5.2.

  Excepting the MAINTAINERS change, all the changes in this can be
  generated by:

    git clone https://github.com/facebook/zstd
    cd zstd/contrib/linux-kernel
    git checkout v1.5.2-kernel
    LINUX=/path/to/linux/repo make import

  Additionally, this includes several minor typo fixes, which have all
  been fixed upstream so they are maintained on the next import"

Link: https://github.com/facebook/zstd/releases/tag/v1.5.2
Link: https://github.com/facebook/zstd/tree/v1.5.2-kernel
Link: https://lore.kernel.org/lkml/20221024202606.404049-1-nickrterrell@gmail.com/
Link: https://github.com/torvalds/linux/commit/637a642f5ca5e850186bb64ac75ebb0f124b458d
* tag 'zstd-linus-v6.2' of https://github.com/terrelln/linux:
  zstd: import usptream v1.5.2
  zstd: Move zstd-common module exports to zstd_common_module.c
  lib: zstd: Fix comment typo
  lib: zstd: fix repeated words in comments
  MAINTAINERS: git://github -> https://github.com for terrelln
  lib: zstd: clean up double word in comment.

Merge tag 'v6.1-soc-fixes' of https://git./linux/kernel/git/matthias.bgg/linux into arm/fixes

PM domains: enable isolation before resetting power

* tag 'v6.1-soc-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
soc: mediatek: pm-domains: Fix the power glitch issue

Link: https://lore.kernel.org/r/29c8b913-53cf-096f-fe44-832ceaeac116@suse.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v6.1-dts64-fixes' of https://git./linux/kernel/git/matthias.bgg/linux into arm/fixes

MT8183: fix phandle for GPU clock
MT8195 demo: fix size of secmon reserved memory area

* tag 'v6.1-dts64-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
arm64: dts: mt8183: Fix Mali GPU clock
arm64: dts: mediatek: mt8195-demo: fix the memory size of node secmon

Link: https://lore.kernel.org/r/af4c45ce-a150-438f-dab4-e47b120c32c4@suse.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

soc: tegra: fix CPU_BIG_ENDIAN dependencies

My previous patch to prevent BPMP from being enabled on big
endian kernels caused a build regression:

WARNING: unmet direct dependencies detected for TEGRA_BPMP
  Depends on [n]: ARCH_TEGRA [=y] && TEGRA_HSP_MBOX [=y] && TEGRA_IVC [=y] && !CPU_BIG_ENDIAN [=y]
  Selected by [y]:
  - ARCH_TEGRA_186_SOC [=y] && ARCH_TEGRA [=y] && ARM64 [=y]
  - ARCH_TEGRA_194_SOC [=y] && ARCH_TEGRA [=y] && ARM64 [=y]
  - ARCH_TEGRA_234_SOC [=y] && ARCH_TEGRA [=y] && ARM64 [=y]

Add even more such dependencies for the SoC types that use
the BPMP driver.

Fixes: 4ddb1bf1a837 ("tegra: mark BPMP driver as little-endian only")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20221215165336.1781080-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

ARM: disallow pre-ARMv5 builds with ld.lld

lld cannot build for ARMv4/v4T targets because it inserts 'blx' instructions
that are unsupported there:

ld.lld: warning: lld uses blx instruction, no object with architecture supporting feature detected

Add a Kconfig time dependency to prevent those targets from being
selected in randconfig builds.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://github.com/llvm/llvm-project/issues/50764
Link: https://github.com/ClangBuiltLinux/linux/issues/964
Link: https://lore.kernel.org/r/20221215162635.3750763-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

ARM: pxa: fix building with clang

The integrated assembler in clang does not understand the xscale
specific mra/mar instructions:

arch/arm/mach-pxa/pxa27x.c:136:15: error: unsupported architectural extension: xscale
asm volatile(".arch_extension xscale\n\t"
arch/arm/mach-pxa/pxa27x.c:136:40: error: invalid instruction, did you mean: mcr, mla, mrc, mrs, msr?
mra r2, r3, acc0

Since these are coprocessor features, the same can be expressed using
mrrc/mcrr, so use that for builds with IAS.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20221215162529.3659187-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

MAINTAINERS: add related dts to IXP4xx

get_maintainer.pl currently give no maintainer on all IXP4xx DTS files.
Add them to the set of files handled by IXP4xx maintainers.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20221005105734.3513581-1-clabbe@baylibre.com
Link: https://lore.kernel.org/r/20221214204223.177807-1-linus.walleij@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

ARM: dts: spear: drop 0x from unit address

By coding style, unit address should not start with 0x.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20221210113347.63939-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'nfsd-6.2-1' of git://git./linux/kernel/git/cel/linux

Pull more nfsd updates from Chuck Lever:
"This contains a number of crasher fixes that were not ready for the
  initial pull request last week.

  In particular, Jeff's patch attempts to address reference count
  underflows in NFSD's filecache, which have been very difficult to
  track down because there is no reliable reproducer.

  Common failure modes:
      https://bugzilla.kernel.org/show_bug.cgi?id=216691#c11
      https://bugzilla.kernel.org/show_bug.cgi?id=216674#c6
      https://bugzilla.redhat.com/show_bug.cgi?id=2138605

  The race windows were found by inspection and the clean-ups appear
  sensible and pass regression testing, so we include them here in the
  hope that they address the problem. However we remain vigilant because
  we don't have 100% certainty yet that the problem is fully addressed.

  Summary:

   - Address numerous reports of refcount underflows in NFSD's filecache

   - Address a UAF in callback setup error handling

   - Address a UAF during server-to-server copy"

* tag 'nfsd-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  NFSD: fix use-after-free in __nfs42_ssc_open()
  nfsd: under NFSv4.1, fix double svc_xprt_put on rpc_create failure
  nfsd: rework refcounting in filecache

parisc: Show MPE/iX model string at bootup

Some (mostly 64-bit machines) machines allow to run MPE/iX and report the MPE
model string via firmware call. Enhance the pdc_model_sysmodel() function to
report that model string.
Note that some 32-bit machines like the B160L wrongly report success for the
firmware call, so include a check to prevent showing wrong info.

Signed-off-by: Helge Deller <deller@gmx.de>

can: kvaser_usb: hydra: help gcc-13 to figure out cmd_len

Debian's gcc-13 [1] throws the following error in
kvaser_usb_hydra_cmd_size():

[1] gcc version 13.0.0 20221214 (experimental) [master r13-4693-g512098a3316] (Debian 13-20221214-1)

| drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c:502:65: error:
| array subscript ‘struct kvaser_cmd_ext[0]’ is partly outside array
| bounds of ‘unsigned char[32]’ [-Werror=array-bounds=]
| 502 | ret = le16_to_cpu(((struct kvaser_cmd_ext *)cmd)->len);

kvaser_usb_hydra_cmd_size() returns the size of given command. It
depends on the command number (cmd->header.cmd_no). For extended
commands (cmd->header.cmd_no == CMD_EXTENDED) the above shown code is
executed.

Help gcc to recognize that this code path is not taken in all cases,
by calling kvaser_usb_hydra_cmd_size() directly after assigning the
command number.

Fixes: aec5fb2268b7 ("can: kvaser_usb: Add support for Kvaser USB hydra family")
Cc: Jimmy Assarsson <extja@kvaser.com>
Cc: Anssi Hannula <anssi.hannula@bitwise.fi>
Link: https://lore.kernel.org/all/20221219110104.1073881-1-mkl@pengutronix.de
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: flexcan: avoid unbalanced pm_runtime_enable warning

When do suspend/resume, meet the following warning message:
[ 30.028336] flexcan 425b0000.can: Unbalanced pm_runtime_enable!

Balance the pm_runtime_force_suspend() and pm_runtime_force_resume().

Fixes: 8cb53b485f18 ("can: flexcan: add auto stop mode for IMX93 to support wakeup")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/all/20221213094351.3023858-1-haibo.chen@nxp.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Documentation: devlink: add missing toc entry for etas_es58x devlink doc

toc entry is missing for etas_es58x devlink doc and triggers this warning:

Documentation/networking/devlink/etas_es58x.rst: WARNING: document isn't included in any toctree

Add the missing toc entry.

Fixes: 9f63f96aac92 ("Documentation: devlink: add devlink documentation for the etas_es58x driver")
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20221213051136.721887-1-mailhol.vincent@wanadoo.fr
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Merge tag 'rtc-6.2' of git://git./linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
"Most of the changes are a rework of the cmos driver by Rafael and
  fixes for issues found using static checkers. The removal of a driver
  leads to a reduction of the number of LOC of the subsystem.

  Removed driver:
   - davinci

  Updates:
   - convert i2c drivers to .probe_new
   - fix spelling mistakes and duplicated words in comments
   - cmos: rework wake setup and ACPI event handling
   - cros-ec: Limit RTC alarm range to fix alarmtimer
   - ds1347: fix century register handling
   - efi: wakeup support
   - isl12022: temperature sensor support
   - pcf85063: fix read_alarm and clkout
   - pcf8523: use stop bit to detect invalid time
   - pcf8563: use RTC_FEATURE_ALARM
   - snvs: be more flexible on LPSRT reads
   - many static checker fixes"

* tag 'rtc-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (48 commits)
  rtc: ds1742: use devm_platform_get_and_ioremap_resource()
  rtc: mxc_v2: Add missing clk_disable_unprepare()
  rtc: rs5c313: correct some spelling mistakes
  rtc: at91rm9200: Fix syntax errors in comments
  rtc: remove duplicated words in comments
  rtc: rv3028: Use IRQ flags obtained from device tree if available
  rtc: ds1307: use sysfs_emit() to instead of scnprintf()
  rtc: isl12026: drop obsolete dependency on COMPILE_TEST
  dt-bindings: rtc: m41t80: Convert text schema to YAML one
  rtc: pcf85063: fix pcf85063_clkout_control
  rtc: rx6110: fix warning with !OF
  rtc: rk808: reduce 'struct rk808' usage
  rtc: msc313: Fix function prototype mismatch in msc313_rtc_probe()
  dt-bindings: rtc: convert rtc-meson.txt to dt-schema
  rtc: pic32: Move devm_rtc_allocate_device earlier in pic32_rtc_probe()
  rtc: st-lpc: Add missing clk_disable_unprepare in st_rtc_probe()
  rtc: pcf85063: Fix reading alarm
  rtc: pcf8523: fix for stop bit
  rtc: efi: Add wakeup support
  rtc: pcf8563: clear RTC_FEATURE_ALARM if no irq
  ...

Merge tag 'dmaengine-6.2-rc1' of git://git./linux/kernel/git/vkoul/dmaengine

Pull dmaengine updates from Vinod Koul:
"New support:

    - Qualcomm SDM670, SM6115 and SM6375 GPI controller support

    - Ingenic JZ4755 dmaengine support

    - Removal of iop-adma driver

  Updates:

   - Tegra support for dma-channel-mask

   - at_hdmac cleanup and virt-chan support for this driver"

* tag 'dmaengine-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (46 commits)
  dmaengine: Revert "dmaengine: remove s3c24xx driver"
  dmaengine: tegra: Add support for dma-channel-mask
  dt-bindings: dmaengine: Add dma-channel-mask to Tegra GPCDMA
  dmaengine: idxd: Remove linux/msi.h include
  dt-bindings: dmaengine: qcom: gpi: add compatible for SM6375
  dmaengine: idxd: Fix crc_val field for completion record
  dmaengine: at_hdmac: Convert driver to use virt-dma
  dmaengine: at_hdmac: Remove unused member of at_dma_chan
  dmaengine: at_hdmac: Rename "chan_common" to "dma_chan"
  dmaengine: at_hdmac: Rename "dma_common" to "dma_device"
  dmaengine: at_hdmac: Use bitfield access macros
  dmaengine: at_hdmac: Keep register definitions and structures private to at_hdmac.c
  dmaengine: at_hdmac: Set include entries in alphabetic order
  dmaengine: at_hdmac: Use pm_ptr()
  dmaengine: at_hdmac: Use devm_clk_get()
  dmaengine: at_hdmac: Use devm_platform_ioremap_resource
  dmaengine: at_hdmac: Use devm_kzalloc() and struct_size()
  dmaengine: at_hdmac: Introduce atc_get_llis_residue()
  dmaengine: at_hdmac: s/atc_get_bytes_left/atc_get_residue
  dmaengine: at_hdmac: Pass residue by address to avoid unnecessary implicit casts
  ...

Merge tag 'soundwire-6.2-rc1' of git://git./linux/kernel/git/vkoul/soundwire

Pull soundwire updates from Vinod Koul:
"This include bunch of Intel driver code reorganization and support for
  qcom v1.7.0 controller:

   - intel: reorganization of hw_ops callbacks, splitting files etc

   - qcom: support for v1.7.0 qcom controllers"

* tag 'soundwire-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
  soundwire: intel: split auxdevice to different file
  soundwire: intel: add in-band wake callbacks in hw_ops
  soundwire: intel: add link power management callbacks in hw_ops
  soundwire: intel: add bus management callbacks in hw_ops
  soundwire: intel: add register_dai callback in hw_ops
  soundwire: intel: add debugfs callbacks in hw_ops
  soundwire: intel: start using hw_ops
  dt-bindings: soundwire: Convert text bindings to DT Schema
  soundwire: cadence: use dai_runtime_array instead of dma_data
  soundwire: cadence: rename sdw_cdns_dai_dma_data as sdw_cdns_dai_runtime
  soundwire: qcom: add support for v1.7 Soundwire Controller
  dt-bindings: soundwire: qcom: add v1.7.0 support
  soundwire: qcom: make reset optional for v1.6 controller
  soundwire: qcom: remove unused SWRM_SPECIAL_CMD_ID
  soundwire: dmi-quirks: add quirk variant for LAPBC710 NUC15

Merge tag 'phy-for-6.2' of git://git./linux/kernel/git/phy/linux-phy

Pull phy updates from Vinod Koul:
"This tme we have again a big pile of qcom-qmp-* changes, one new
  driver and bunch of new hardware support.

  New hardware support:

   - Allwinner H616 USB PHY and A100 DPHY support

   - TI J721s2, J784s4 and J721e support

   - Freescale i.MX8MP PCIe PHY support

   - New driver for Renesas Ethernet SERDES supporting R-Car S4-8

   - Qualcomm SM8450 PCIe1 PHY support in EP mode

   - Qualcomm SC8280XP PCIe PHY support (including x4 mode)

   - Fixed Qualcomm SC8280XP USB4-USB3-DP PHY DT bindings

  Updates:

   - A big pile of updates on qcom-qmp-* drivers following the driver
     split and reorganization merged earlier

   - Phy order of API calls documentation update"

* tag 'phy-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (174 commits)
  phy: ti: phy-j721e-wiz: add j721s2-wiz-10g module support
  dt-bindings: phy-j721e-wiz: add j721s2 compatible string
  phy: use devm_platform_get_and_ioremap_resource()
  phy: allwinner: phy-sun6i-mipi-dphy: Add the A100 DPHY variant
  phy: allwinner: phy-sun6i-mipi-dphy: Add a variant power-on hook
  phy: allwinner: phy-sun6i-mipi-dphy: Set the enable bit last
  phy: allwinner: phy-sun6i-mipi-dphy: Make RX support optional
  dt-bindings: sun6i-a31-mipi-dphy: Add the A100 DPHY variant
  dt-bindings: sun6i-a31-mipi-dphy: Add the interrupts property
  phy: qcom-qmp-pcie: drop redundant clock allocation
  phy: qcom-qmp-usb: drop redundant clock allocation
  phy: qcom-qmp: drop unused type header
  phy: qcom-qmp-usb: drop sc8280xp reference-clock source
  dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: drop reference-clock source
  phy: qcom-qmp-combo: add support for updated sc8280xp binding
  phy: qcom-qmp-combo: rename DP_PHY register pointer
  phy: qcom-qmp-combo: rename common-register pointers
  phy: qcom-qmp-combo: clean up DP clock callbacks
  phy: qcom-qmp-combo: separate clock and provider registration
  phy: qcom-qmp-combo: add clock registration helper
  ...

Merge tag 'iommu-updates-v6.2' of git://git./linux/kernel/git/joro/iommu

Pull iommu updates from Joerg Roedel:
"Core code:
   - map/unmap_pages() cleanup
   - SVA and IOPF refactoring
   - Clean up and document return codes from device/domain attachment

  AMD driver:
   - Rework and extend parsing code for ivrs_ioapic, ivrs_hpet and
     ivrs_acpihid command line options
   - Some smaller cleanups

  Intel driver:
   - Blocking domain support
   - Cleanups

  S390 driver:
   - Fixes and improvements for attach and aperture handling

  PAMU driver:
   - Resource leak fix and cleanup

  Rockchip driver:
   - Page table permission bit fix

  Mediatek driver:
   - Improve safety from invalid dts input
   - Smaller fixes and improvements

  Exynos driver:
   - Fix driver initialization sequence

  Sun50i driver:
   - Remove IOMMU_DOMAIN_IDENTITY as it has not been working forever
   - Various other fixes"

* tag 'iommu-updates-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (74 commits)
  iommu/mediatek: Fix forever loop in error handling
  iommu/mediatek: Fix crash on isr after kexec()
  iommu/sun50i: Remove IOMMU_DOMAIN_IDENTITY
  iommu/amd: Fix typo in macro parameter name
  iommu/mediatek: Remove unused "mapping" member from mtk_iommu_data
  iommu/mediatek: Improve safety for mediatek,smi property in larb nodes
  iommu/mediatek: Validate number of phandles associated with "mediatek,larbs"
  iommu/mediatek: Add error path for loop of mm_dts_parse
  iommu/mediatek: Use component_match_add
  iommu/mediatek: Add platform_device_put for recovering the device refcnt
  iommu/fsl_pamu: Fix resource leak in fsl_pamu_probe()
  iommu/vt-d: Use real field for indication of first level
  iommu/vt-d: Remove unnecessary domain_context_mapped()
  iommu/vt-d: Rename domain_add_dev_info()
  iommu/vt-d: Rename iommu_disable_dev_iotlb()
  iommu/vt-d: Add blocking domain support
  iommu/vt-d: Add device_block_translation() helper
  iommu/vt-d: Allocate pasid table in device probe path
  iommu/amd: Check return value of mmu_notifier_register()
  iommu/amd: Fix pci device refcount leak in ppr_notifier()
  ...

Merge tag 'loongarch-6.2' of git://git./linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch updates from Huacai Chen:

- Switch to relative exception tables

- Add unaligned access support

- Add alternative runtime patching mechanism

- Add FDT booting support from efi system table

- Add suspend/hibernation (ACPI S3/S4) support

- Add basic STACKPROTECTOR support

- Add ftrace (function tracer) support

- Update the default config file

* tag 'loongarch-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (24 commits)
  LoongArch: Update Loongson-3 default config file
  LoongArch: modules/ftrace: Initialize PLT at load time
  LoongArch/ftrace: Add HAVE_FUNCTION_GRAPH_RET_ADDR_PTR support
  LoongArch/ftrace: Add HAVE_DYNAMIC_FTRACE_WITH_ARGS support
  LoongArch/ftrace: Add HAVE_DYNAMIC_FTRACE_WITH_REGS support
  LoongArch/ftrace: Add dynamic function graph tracer support
  LoongArch/ftrace: Add dynamic function tracer support
  LoongArch/ftrace: Add recordmcount support
  LoongArch/ftrace: Add basic support
  LoongArch: module: Use got/plt section indices for relocations
  LoongArch: Add basic STACKPROTECTOR support
  LoongArch: Add hibernation (ACPI S4) support
  LoongArch: Add suspend (ACPI S3) support
  LoongArch: Add processing ISA Node in DeviceTree
  LoongArch: Add FDT booting support from efi system table
  LoongArch: Use alternative to optimize libraries
  LoongArch: Add alternative runtime patching mechanism
  LoongArch: Add unaligned access support
  LoongArch: BPF: Add BPF exception tables
  LoongArch: Remove the .fixup section usage
  ...

Merge tag 'csky-for-linus-6.2-rc1' of https://github.com/c-sky/csky-linux

Pull arch/csky updates from Guo Ren:

- Revert rseq support - it wasn't ready

- Add current_stack_pointer support

- Typo fixup

* tag 'csky-for-linus-6.2-rc1' of https://github.com/c-sky/csky-linux:
  Revert "csky: Add support for restartable sequence"
  Revert "csky: Fixup CONFIG_DEBUG_RSEQ"
  csky: Kconfig: Fix spelling mistake "Meory" -> "Memory"
  csky: add arch support current_stack_pointer

Merge tag 'powerpc-6.2-1' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:

- Add powerpc qspinlock implementation optimised for large system
   scalability and paravirt. See the merge message for more details

- Enable objtool to be built on powerpc to generate mcount locations

- Use a temporary mm for code patching with the Radix MMU, so the
   writable mapping is restricted to the patching CPU

- Add an option to build the 64-bit big-endian kernel with the ELFv2
   ABI

- Sanitise user registers on interrupt entry on 64-bit Book3S

- Many other small features and fixes

Thanks to Aboorva Devarajan, Angel Iglesias, Benjamin Gray, Bjorn
Helgaas, Bo Liu, Chen Lifu, Christoph Hellwig, Christophe JAILLET,
Christophe Leroy, Christopher M. Riedl, Colin Ian King, Deming Wang,
Disha Goel, Dmitry Torokhov, Finn Thain, Geert Uytterhoeven, Gustavo A.
R. Silva, Haowen Bai, Joel Stanley, Jordan Niethe, Julia Lawall, Kajol
Jain, Laurent Dufour, Li zeming, Miaoqian Lin, Michael Jeanson, Nathan
Lynch, Naveen N. Rao, Nayna Jain, Nicholas Miehlbradt, Nicholas Piggin,
Pali Rohár, Randy Dunlap, Rohan McLure, Russell Currey, Sathvika
Vasireddy, Shaomin Deng, Stephen Kitt, Stephen Rothwell, Thomas
Weißschuh, Tiezhu Yang, Uwe Kleine-König, Xie Shaowen, Xiu Jianfeng,
XueBing Chen, Yang Yingliang, Zhang Jiaming, ruanjinjie, Jessica Yu,
and Wolfram Sang.

* tag 'powerpc-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (181 commits)
  powerpc/code-patching: Fix oops with DEBUG_VM enabled
  powerpc/qspinlock: Fix 32-bit build
  powerpc/prom: Fix 32-bit build
  powerpc/rtas: mandate RTAS syscall filtering
  powerpc/rtas: define pr_fmt and convert printk call sites
  powerpc/rtas: clean up includes
  powerpc/rtas: clean up rtas_error_log_max initialization
  powerpc/pseries/eeh: use correct API for error log size
  powerpc/rtas: avoid scheduling in rtas_os_term()
  powerpc/rtas: avoid device tree lookups in rtas_os_term()
  powerpc/rtasd: use correct OF API for event scan rate
  powerpc/rtas: document rtas_call()
  powerpc/pseries: unregister VPA when hot unplugging a CPU
  powerpc/pseries: reset the RCU watchdogs after a LPM
  powerpc: Take in account addition CPU node when building kexec FDT
  powerpc: export the CPU node count
  powerpc/cpuidle: Set CPUIDLE_FLAG_POLLING for snooze state
  powerpc/dts/fsl: Fix pca954x i2c-mux node names
  cxl: Remove unnecessary cxl_pci_window_alignment()
  selftests/powerpc: Fix resource leaks
  ...