drm/amd/display: Stop waiting for vblank during pipe programming

[why and how]
This line was originally removed for a compliance issue, but then
reverted as it caused a fringe underflow case.

However, the addition of this line caused a underflow regression
when subVP is on, and it needs to be removed again. We plan to
fix subvp underflow and then re-add in this line. After that,
we will investigate what to do next for the compliance issue.

Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Martin Leung <Martin.Leung@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Modify checks to enable TPS3 pattern when required

[HOW&WHY]
Checking if both DSC and FEC supported from sink and
source before going with TPS3 pattern during link
training.

Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Iswara Nagulendran <iswara.nagulendran@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove rate check from pixel rate divider update

[Why]
This check is not needed, and can cause CRC mismatch.

[How]
Remove check and early exit from divider update.

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Check validation passed after applying pipe split changes

[WHY?]
Validation can fail for configurations that were previously supported, by only
changing parameters such as the DET allocations, which is currently unexpected.

[HOW?]
Add a check that validation passes after applying pipe split related changes.

Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update DML formula

[why]
This is to update SW DML implementation.

Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Don't enable ODM + MPO

[Description]
Driver doesn't support ODM + MPO

Reviewed-by: Dillon Varone <Dillon.Varone@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Include virtual signal to set k1 and k2 values

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Reinit DPG when exiting dynamic ODM

[WHY]
DPG must be returned to initialized state when pipe is disabled.

[HOW]
Reinit DPG on unused pipes when exiting dynamic ODM.

Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: drop vblank_lock from struct amdgpu_display_manager

As of commit 09a5df6c444c ("drm/amd/display: Fix multi-display support
for idle opt workqueue"), vblank_lock is no longer being used. So, don't
init it in amdgpu_dm_init() and remove it from struct
amdgpu_display_manager.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Remove unused variable

kfd_topology_device->cache_count is not used by
other fucntions, so remove it.

Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Skip program gfxhub_v3_0_3 system aperture registers under SRIOV

[Why]
gfxhub_v3_0_3 system aperture registers are removed from RLCG register access range.

[How]
Skip access gfxhub_v3_0_3 system aperture registers under SRIOV VF.
These registers will be programmed on host side.

Signed-off-by: Yifan Zha <Yifan.Zha@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Skip access SDMA0_F32_CNTL in sdma_v6_0_enable under SRIOV

[Why]
SDMA0_F32_CNTL is a PF_only regitser which will be blocked by L1.
RLCG will not program the register as well.

[How]
Skip to program SDMA0_F32_CNTL under SRIOV VF.

Signed-off-by: Yifan Zha <Yifan.Zha@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Skip access GRBM_CNTL under SRIOV on gfx_v11

[Why]
GRBM_CNTL is a PF_only register on gfx_v11.
RLCG interface will return "out of range" under SRIOV VF.

[How]
Skip access GRBM_CNTL under gfx_v11 SRIOV VF.

Signed-off-by: Yifan Zha <Yifan.Zha@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Disable GPU reset on SRIOV before remove pci.

The recent change brought a bug on SRIOV envrionment. It caused
unloading amdgpu failed on Guest VM. The reason is that the VF
FLR was requested while unloading amdgpu driver, but the VF FLR
of SRIOV sequence is wrong while removing PCI device.

For SRIOV, the guest driver should not trigger the whole XGMI hive
to do the reset. Host driver control how the device been reset.

Fixes: f5c7e7797060 ("drm/amdgpu: Adjust removal control flow for smu v13_0_2")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Signed-off-by: Gavin Wan <Gavin.Wan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Enable GFX RAS feature for gfx v11_0_3

v1: Support gfx ras feature enablement for gfx v11_0_3.
v2: Update function name and error message.

Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Modify mismatched function name

No functional modification involved.

drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:615: warning: expecting prototype for setup_subvp_dmub_command(). Prototype was for populate_subvp_cmd_pipe_info() instead.

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2587
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: make wake_up_aux_channel static

This symbol is not used outside of dc_link_dp.c, so marks it static.

drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:5230:16: warning: no previous prototype for function 'wake_up_aux_channel'.

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2581
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Cleanup kfd_dev struct

Cleanup kfd_dev struct by removing ddev and pdev as both
drm_device and pci_dev can be fetched from amdgpu_device.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Tested-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: disable GFXOFF during compute for GFX11

Temporary workaround to fix issues observed in some compute applications
when GFXOFF is enabled on GFX11.

Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Fail the suspend if resources can't be evicted

If a system does not have swap and memory is under 100% usage,
amdgpu will fail to evict resources.  Currently the suspend
carries on proceeding to reset the GPU:

```
[drm] evicting device resources failed
[drm:amdgpu_device_ip_suspend_phase2 [amdgpu]] *ERROR* suspend of IP block <vcn_v3_0> failed -12
[drm] free PSP TMR buffer
[TTM] Failed allocating page table
[drm] evicting device resources failed
amdgpu 0000:03:00.0: amdgpu: MODE1 reset
amdgpu 0000:03:00.0: amdgpu: GPU mode1 reset
amdgpu 0000:03:00.0: amdgpu: GPU smu mode1 reset
```

At this point if the suspend actually succeeded I think that amdgpu
would have recovered because the GPU would have power cut off and
restored.  However the kernel fails to continue the suspend from the
memory pressure and amdgpu fails to run the "resume" from the aborted
suspend.

```
ACPI: PM: Preparing to enter system sleep state S3
SLUB: Unable to allocate memory on node -1, gfp=0xdc0(GFP_KERNEL|__GFP_ZERO)
  cache: Acpi-State, object size: 80, buffer size: 80, default order: 0, min order: 0
  node 0: slabs: 22, objs: 1122, free: 0
ACPI Error: AE_NO_MEMORY, Could not update object reference count (20210730/utdelete-651)

[drm:psp_hw_start [amdgpu]] *ERROR* PSP load kdb failed!
[drm:psp_resume [amdgpu]] *ERROR* PSP resume failed
[drm:amdgpu_device_fw_loading [amdgpu]] *ERROR* resume of IP block <psp> failed -62
amdgpu 0000:03:00.0: amdgpu: amdgpu_device_ip_resume failed (-62).
PM: dpm_run_callback(): pci_pm_resume+0x0/0x100 returns -62
amdgpu 0000:03:00.0: PM: failed to resume async: error -62
```

To avoid this series of unfortunate events, fail amdgpu's suspend
when the memory eviction fails.  This will let the system gracefully
recover and the user can try suspend again when the memory pressure
is relieved.

Reported-by: post@davidak.de
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2223
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amd/display: Limit max DSC target bpp for specific monitors"

This reverts commit 55eea8ef98641f6e1e1c202bd3a49a57c1dd4059.

This quirk is now handled in the DRM core, so we can drop all of
the internal code that was added to handle it.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: use max_dsc_bpp in amdgpu_dm

Since, the quirk is handled in the DRM core now, we can use that value
instead of the internal value.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/edid: add a quirk for two LG monitors to get them to work on 10bpc

The LG 27GP950 and LG 27GN950 have visible display corruption when
trying to use 10bpc modes. So, to fix this, cap their maximum DSC
target bitrate to 15bpp.

Suggested-by: Roman Li <roman.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add EEPROM I2C address support for ip discovery

1. Update EEPROM_I2C_MADDR_SMU_13_0_0 to EEPROM_I2C_MADDR_54H
2. Add EEPROM I2C address support for smu v13_0_0 and v13_0_10.

Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Update ras eeprom support for smu v13_0_0 and v13_0_10

Enable RAS EEPROM support for smu v13_0_0 and v13_0_10.

Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Optimize TA load/unload/invoke debugfs interfaces

1. Add a function pointer structure ta_funcs to psp context
2. Make the interfaces generic to all TAs
3. Leverage exisitng TA context and remove unused functions
4. Fix return code bugs

v2: Add comments for ta funcs macros and correct typo

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Candice Li <candice.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Optimize RAS TA initialization and TA unload funcs

1. Save TA unload psp response status
2. Add RAS TA loading status check for initializaiton
3. Drop RAS context teardown to allow RAS TA to be reloaded

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Candice Li <candice.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Fix NULL pointer dereference in svm_migrate_to_ram()

./drivers/gpu/drm/amd/amdkfd/kfd_migrate.c:985:58-62: ERROR: p is NULL but dereferenced.

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2549
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: prevent memory leak

In dce6(0,1,4)_create_resource_pool and dce80_create_resource_pool
the allocated memory should be released if construct pool fails.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: gehao <gehao@kylinos.cn>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: move remaining FPU code to dml folder

pipes[pipe_cnt].pipe.src.dcc_fraction_of_zs_req_luma = 0;
pipes[pipe_cnt].pipe.src.dcc_fraction_of_zs_req_chroma = 0;
these two operations in dcn32/dcn32_resource.c still need to use FPU,
This will cause compilation to fail on ARM64 platforms because
-mgeneral-regs-only is enabled by default to disable the hardware FPU.
Therefore, imitate the dcn31_zero_pipe_dcc_fraction function in
dml/dcn31/dcn31_fpu.c, declare the dcn32_zero_pipe_dcc_fraction function
in dcn32_fpu.c, and move above two operations into this function.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Ao Zhong <hacc1225@gmail.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: move remaining FPU code to dml folder

In the process of enabling DCN support for arm64, I found that the
dcn10_resource_construct_fp function in dcn10/dcn10_resource.c still
needs to use FPU. This will cause compilation to fail on ARM64 platforms
because -mgeneral-regs-only is enabled by default to disable the
hardware FPU. So move dcn10_resource_construct_fp from dcn10 folder to
dml/dcn10 folder to enable hardware FPU for that function.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Ao Zhong <hacc1225@gmail.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove deprecated MES version vars

MES scheduler and kiq versions are stored in mes.sched_version and
mes.kiq_version, respectively, which are read from a register after
their queues are initialized. Remove mes.ucode_fw_version and
mes.data_fw_version which tried to read this versioning info from the
firmware headers (which don't contain this information).

Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: correct MES debugfs versions

Use mes.sched_version, mes.kiq_version for debugfs as
mes.ucode_fw_version does not contain correct versioning information.

Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Move the mutex_lock to protect the return status of securedisplay command buffer

[Why]
Before we call psp_securedisplay_invoke(), we call
psp_prep_securedisplay_cmd_buf() to prepare and initialize the command
buffer.

However, we didn't use the mutex_lock to protect the status of command
buffer. So when multiple threads are using the command buffer, after
thread A return from psp_securedisplay_invoke() and the command buffer
status is set to SUCCESS, another thread B may call
psp_prep_securedisplay_cmd_buf() and initialize the status to FAILURE
again, and cause Thread A to get a failure return status.

[How]
Move the mutex_lock out of psp_securedisplay_invoke() to its caller to
cover psp_prep_securedisplay_cmd_buf() and the code checking the return
status of command buffer.

Signed-off-by: Alan Liu <HaoPing.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove ras_error_status parameter for UMC poison handler

Make the code simpler.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add RAS poison handling for MCA

For MCA poison, if unmap queue fails, only gpu reset should be
triggered without page retirement handling, MCA notifier will do it.

v2: handle MCA poison consumption in umc_poison_handler directly.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use page retirement API in MCA notifier

Make the code more readable.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add RAS page retirement functions for MCA

Define page retirement functions for MCA platform.

v2: remove page retirement handling from MCA poison handler,
    let MCA notifier do page retirement.

v3: remove specific poison handler for MCA to simplify code.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: remove unused struct cdit_header

struct cdit_header was never used across any of the amd drivers nor
this is exposed to UAPI so it can be removed.

This patch removes struct cdit_header and refactor code accordingly

Signed-off-by: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@gmail.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: remove unused kfd_pm4_headers_diq header file

kfd_pm4_headers_diq.h header is a leftover from the old H/W debugger
module support added on commit
fbeb661bfa895dc ("drm/amdkfd: Add skeleton H/W debugger module support").
That implementation was removed after a while and the last file that
included that header was removed on commit
5bdd3eb253544b1 ("drm/amdkfd: Remove unused old debugger implementation").

This patch removes the unused header file kfd_pm4_headers_diq.h

Signed-off-by: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@gmail.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Filter Invalid 420 Modes for HDMI TMDS

[Why]
Invalidate unsupported 420 modes on HDMI TMDS. HDMI TMDS does not
support ODM. Any modes that are horizontally wider than 4096, cannot be
supported via TMDS. So they must be filtered out and should not pass
validation.

[How]
Create fake plane for the new stream, and validate global state by going
through dml validation routine.

Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Rework comments on dc file

The file dc.c has multiple comments that do not follow the kernel-doc or
are made in a distracting way. This commit alleviates part of this issue
by reorganizing some comments inside the dc file.

Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.209

DC version 3.2.209 brings along the following:

* Improve color manipulation
* Add corrections to DML and some flag configuration
* Updates for DCN32x
* Expand kernel-doc

Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Aric Cyr <Aric.Cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: set fb_modifiers_not_supported in vkms

This patch to fix the gdm3 start failure with virual display:

/usr/libexec/gdm-x-session[1711]: (II) AMDGPU(0): Setting screen physical size to 270 x 203
/usr/libexec/gdm-x-session[1711]: (EE) AMDGPU(0): Failed to make import prime FD as pixmap: 22
/usr/libexec/gdm-x-session[1711]: (EE) AMDGPU(0): failed to set mode: Invalid argument
/usr/libexec/gdm-x-session[1711]: (WW) AMDGPU(0): Failed to set mode on CRTC 0
/usr/libexec/gdm-x-session[1711]: (EE) AMDGPU(0): Failed to enable any CRTC
gnome-shell[1840]: Running GNOME Shell (using mutter 42.2) as a X11 window and compositing manager
/usr/libexec/gdm-x-session[1711]: (EE) AMDGPU(0): failed to set mode: Invalid argument

vkms doesn't have modifiers support, set fb_modifiers_not_supported to bring the gdm back.

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add kernel doc for commit sequence

Add basic kernel-doc that describes some of the struct and functions
that are part of the DC commit sequence..

Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add kernel doc to some of the dc fields

Add kernel-doc to some important elements from DC struct that might help
to understand DC sequence.

Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add basic ODM description

Add kernel-doc to some of the ODM-related functions.

Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DEC/CRB basic doc

Add a kernel-doc to the DE-Tile function hook.

Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Expand kernel doc for DC

This commit adds extra documentation for elements related to FAMs.

Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Wrong colorimetry workaround

[Why]
For FreeSync HDR, native color space flag in AMD VSIF(BT.709) should be
used when intepreting content and color space flag in VSC or AVI
infoFrame should be ignored. However, it turned out some userspace
application still use color flag in VSC or AVI infoFrame which is
incorrect.

[How]
Transfer function is used when building the VSC and AVI infoFrame. Set
colorimetry to BT.709 when all the following match:

1. Pixel format is YCbCr;
2. In FreeSync 2 HDR, color is COLOR_SPACE_2020_YCBCR;
3. Transfer function is TRANSFER_FUNC_GAMMA_22;

Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Ma Hanghong <hanghong.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: skip commit minimal transition state

[WHY]
Now dynamic ODM will now be disabled when MPO is required safe
transitions to avoid underflow, but we are triggering the way of minimal
transition too often. Commit state of dc with no check will do pipeline
setup which may re-initialize the component with no need such as audio.

[HOW]
Just do the minimal transition when all of pipes are in use, otherwise
return true to skip.

Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Dillon Varone <Dillon.Varone@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: zhikzhai <zhikai.zhai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: wait for vblank during pipe programming

[WHY]
Skipping vblank during global sync update request can result in
underflow on certain displays.

[HOW]
Roll back to the previous behavior where DC waits for vblank during pipe
programming.

Fixes: 5d3e14421410 ("drm/amd/display: do not wait for vblank during pipe programming")
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Haiyi Zhou <Haiyi.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix SDR visual confirm

Apply SDR visual confirm to RGB10 and FP16 formats as well when needed.

Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Aric Cyr <Aric.Cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: cursor update command incomplete

Missing send cursor_rect width & Height into DMUB. PSR-SU would use
these information. But missing these assignment in last refactor commit

Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Max Tseng <max.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Enable timing sync on DCN32

Missed enabling timing sync on DCN32 because DCN32 has a different DML
param.

Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix HDCP 1.X 1A-04 failing

[Why]
On some linux based OS, the hotplug->HDCP start takes longer than
4seconds (by ~100ms) This is due to the HDCP delay (3 sec) so we only
have 1 second to hotplug->stream enablement, which is not enough for
certain OS configs.

[How]
Change the Delay to 0 seconds. From testing it seems like 0 Seconds can
pass 1.x and 2.x compliances

Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove optimization for VRR updates

Optimization caused unexpected regression, so remove for now.

Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Set memclk levels to be at least 1 for dcn32

[Why]
Cannot report 0 memclk levels even when SMU does not provide any.

[How]
When memclk levels reported by SMU is 0, set levels to 1.

Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update latencies on DCN321

Update DF related latencies based on new measurements.

Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.208

DC version 3.2.208 brings along the following:

* Add more kernel doc
* Enable secure display on DCN21
* Limit dcn32 to 1950Mhz display clock
* PSR code refactor
* Rework audio stream sequence
* Generic bug fixes

Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Aric Cyr <Aric.Cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Document part of the DMUB cmd

Add a simple documentation in the dmub_cmd.

Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Limit dcn32 to 1950Mhz display clock

[why]
Hardware team recommends we limit dispclock to 1950Mhz for all DCN3.2.x

[how]
Limit to 1950 when initializing clocks.

Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Drop struct crc_region and reuse struct rect

[Why]
reuse struct rect rather than adding a new struct.

[How]
- Userspace keeps inputting x_start, y_start, x_end, y_end
- We translate data to x, y, width, height in code flow to store
- translate back to x_start, y_start, x_end, y_end before programming HW

Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Implement secure display on DCN21

[Why]
Porting secure display feature from DCN10 to DCN21. Support single
display for now and will extend to multiple displays.

[How]
- use workqueue to offload works for dmub or dmcu firmware
- after receiving ROI update from userspace, set skip_frame_cnt to 1
- refactor amdgpu_dm_crtc_handle_crc_window_irq()
- disable PSR before activating secure_display on a crtc
- check if secure_display is activated before enabling psr
- only work for single display for now.

Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Ignore Cable ID Feature

Ignore cable ID for DP2 receivers that does not support the feature.

Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update DSC capabilitie for DCN314

dcn314 has 4 DSC - conflicted hardware document updated and confirmed.

Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Leo Chen <sancchen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Revert logic for plane modifiers

This file was split in commit 5d945cbcd4b16a29d6470a80dfb19738f9a4319f
("drm/amd/display: Create a file dedicated to planes") and the logic in
dm_plane_format_mod_supported() function got changed by a switch logic.
That change broke drm_plane modifiers setting on series 5000 APUs
(tested on OXP mini AMD 5800U and HP Dev One 5850U PRO)
leading to Gamescope not working as reported on GitHub[1]

To reproduce the issue, enter a TTY and run:

$ gamescope -- vkcube

With said commit applied it will abort. This one restores the old logic,
fixing the issue that affects Gamescope.

[1](https://github.com/Plagman/gamescope/issues/624)

Cc: <stable@vger.kernel.org> # 6.0.x
Signed-off-by: Joaquín Ignacio Aramendía <samsagax@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: fix repeated words in comments

Delete the redundant word 'the'.

Signed-off-by: wangjianli <wangjianli@cdjrlc.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amd/amdgpu: fix repeated words in comments

Delete the redundant word 'the'.

Signed-off-by: wangjianli <wangjianli@cdjrlc.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: refine wake up aux in retrieve link caps

[Why]
Read set_power_state dpcd after HPD cause USB4 CTS 4.2.1.1

[How]
Read LTTPR caps first. If aux channel not ready, wake up aux channel.
If wake up aux channel return pass, retrieve lttpr caps again. If wake
up aux channel return false, register a detection retry timer.

Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Lewis Huang <Lewis.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add events log to trace OPTC lock and unlock

As an attempt to offer more DCN debug tools for cases where the OPTC can
hang, this commit introduces a trace event responsible for showing OPTC
status when it requests lock and unlock.

Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Convert documentation to a kernel-doc

The dc_dmub_srv file has a lot of documentation associated with SubVP
that could be converted to a kernel-doc. This commit just changes the
comment style to a kernel-doc.

Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Refactor eDP PSR codes

We split out PSR config from "global" to "per-panel" config settings.

Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Robin Chen <robin.chen@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Ian Chen <ian.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: correctly populate dcn315 clock table

Fix incorrect pstate read order as well as min and max state logic.

Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove audio mute control in hpo dp

VPG doesn't have the ability to mute audio output by sending all 0s in
audio SDP. The existing implemention is disabling audio SDP instead.
This is same as what dp_audio_enable does. Since it is no longer
referenced by any callers, we decided to remove this interface for
simplicity.

Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: move stream encoder audio setup to link_hwss

Unify stream encoder audio setup interface.

Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: refactor enable/disable audio stream hw sequence

[why]
1. As recommended by hardware team, don't enable APG when stream is not
   enabled.
2. Move audio stream encoder programming into link_hwss.

[how]
1. Merge dp_audio_enable into enable audio stream hw sequence.
2. Move stream encoder programming into link hwss level to unify stream
   encoder programming interface.

Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove FPU guards from the DML folder

As part of the programming expectation for using DML functions, DC
requires that any DML function invoked outside DML uses:

 DC_FP_START();
 ... dml function ...
 DC_FP_END();

Additionally, all the DML functions that can be invoked outside the DML
folder call the function dc_assert_fp_enabled(), which is responsible
for triggering a warning in the case that the DML function was not
guarded by the DC_FP_START/END. For this reason, call DC_FP_START/END
inside DML is wrong, and this commit removes all of those references.

Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add UHBR135 and UHBR20 into debugfs

Add support to manually force link rate to UHBR135 (0x546) and UHBR20
(0x7d0).

Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: disallow gfxoff until GC IP blocks complete s2idle resume

In the S2idle suspend/resume phase the gfxoff is keeping functional so
some IP blocks will be likely to reinitialize at gfxoff entry and that
will result in failing to program GC registers.Therefore, let disallow
gfxoff until AMDGPU IPs reinitialized completely.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: skip mes self test for gc 11.0.3 in recover

Temporary disable mes self teset for gc 11.0.3 during gpu_recovery.

Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com>
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: introduce dummy cache info for property asic

This dummy cache info will enable kfd base function support.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: correct the cache info for gfx1036

correct the cache information for gfx1036

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: update gfx1037 Lx cache setting

Update the gfx1037 L1/L2 cache setting.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Add IMU fw version to fw version queries

IMU is a new firmware for GFX11.

There are four means by which firmware version can be queried
from the driver: device attributes, vf2pf, debugfs,
and the AMDGPU_INFO_FW_VERSION option in the amdgpu info ioctl.

Add IMU as an option for those four methods.

V2: Added debugfs

Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: use vma_lookup() instead of find_vma()

Using vma_lookup() verifies the start address is contained in the found
vma.  This results in easier to read the code.

Signed-off-by: Deming Wang <wangdeming@inspur.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: make dcn32_mpc_funcs static

The symbol is not used outside of the file, so mark it static.

Fixes the following warning:

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_mpc.c:985:24: warning:
symbol 'dcn32_mpc_funcs' was not declared. Should it be static?

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: make dcn32_mmhubbub_funcs static

The symbol is not used outside of the file, so mark it static.

Fixes the following warning:

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_mmhubbub.c:214:28:
warning: symbol 'dcn32_mmhubbub_funcs' was
not declared. Should it be static?

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Make some symbols static

These symbols qp_table_422_10bpc_min, qp_table_444_8bpc_max,
qp_table_420_12bpc_max, qp_table_444_10bpc_min, qp_table_420_8bpc_max,
qp_table_444_8bpc_min, qp_table_444_12bpc_min, qp_table_420_12bpc_min,
qp_table_422_12bpc_min, qp_table_422_12bpc_max, qp_table_444_12bpc_max,
qp_table_420_8bpc_min, qp_table_422_8bpc_min, qp_table_422_10bpc_max,
qp_table_420_10bpc_max, qp_table_420_10bpc_min, qp_table_444_10bpc_max,
qp_table_422_8bpc_max are not used outside of the file,
so mark them static.

./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:28:18: warning:
symbol 'qp_table_422_10bpc_min' was not declared. Should it be static?

./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:61:18: warning:
symbol 'qp_table_444_8bpc_max' was not declared. Should it be static?

./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:102:18: warning:
symbol 'qp_table_420_12bpc_max' was not declared. Should it be static?

./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:135:18: warning:
symbol 'qp_table_444_10bpc_min' was not declared. Should it be static?

./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:188:18: warning:
symbol 'qp_table_420_8bpc_max' was not declared. Should it be static?

./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:209:18: warning:
symbol 'qp_table_444_8bpc_min' was not declared. Should it be static?

./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:250:18: warning:
symbol 'qp_table_444_12bpc_min' was not declared. Should it be static?

./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:315:18: warning:
symbol 'qp_table_420_12bpc_min' was not declared. Should it be static?

./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:348:18: warning:
symbol 'qp_table_422_12bpc_min' was not declared. Should it be static?

./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:389:18: warning:
symbol 'qp_table_422_12bpc_max' was not declared. Should it be static?

./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:430:18: warning:
symbol 'qp_table_444_12bpc_max' was not declared. Should it be static?

./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:495:18: warning:
symbol 'qp_table_420_8bpc_min' was not declared. Should it be static?

./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:516:18: warning:
symbol 'qp_table_422_8bpc_min' was not declared. Should it be static?

./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:541:18: warning:
symbol 'qp_table_422_10bpc_max' was not declared. Should it be static?

./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:574:16: warning:
symbol 'qp_table_420_10bpc_max' was not declared. Should it be static?

./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:601:18: warning:
symbol 'qp_table_420_10bpc_min' was not declared. Should it be static?

./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:628:18: warning:
symbol 'qp_table_444_10bpc_max' was not declared. Should it be static?

./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:681:18: warning:
symbol 'qp_table_422_8bpc_max' was not declared. Should it be static?

Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix sdma doorbell init ordering on APUs

Commit 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()")
uncovered a bug in amdgpu that required a reordering of the driver
init sequence to avoid accessing a special register on the GPU
before it was properly set up leading to an PCI AER error.  This
reordering uncovered a different hw programming ordering dependency
in some APUs where the SDMA doorbells need to be programmed before
the GFX doorbells. To fix this, move the SDMA doorbell programming
back into the soc15 common code, but use the actual doorbell range
values directly rather than the values stored in the ring structure
since those will not be initialized at this point.

This is a partial revert, but with the doorbell assignment
fixed so the proper doorbell index is set before it's used.

Fixes: e3163bc8ffdfdb ("drm/amdgpu: move nbio sdma_doorbell_range() into sdma code for vega")
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: skhan@linuxfoundation.org

drm/amd/display: Don't return false if no stream

pipe_ctx[i] exists even if the pipe is not
in use. If the pipe is not in use it will
always have a null stream, so don't return
false in this case.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove wrong pipe control lock

When using a device based on DCN32/321,
we have an issue where a second
4k@60Hz display does not light up,
and the system becomes unresponsive
for a few minutes. In the debug process,
it was possible to see a hang
in the function dcn20_post_unlock_program_front_end
in this part:

for (j = 0; j < TIMEOUT_FOR_PIPE_ENABLE_MS*1000
&& hubp->funcs->hubp_is_flip_pending(hubp); j++)
mdelay(1);
}

The hubp_is_flip_pending always returns positive
for waiting pending flips which is a symptom of
pipe hang. Additionally, the dmesg log shows
this message after a few minutes:

  BUG: soft lockup - CPU#4 stuck for 26s!
  ...
  [  +0.000003]  dcn20_post_unlock_program_front_end+0x112/0x340 [amdgpu]
  [  +0.000171]  dc_commit_state_no_check+0x63d/0xbf0 [amdgpu]
  [  +0.000155]  ? dc_validate_global_state+0x358/0x3d0 [amdgpu]
  [  +0.000154]  dc_commit_state+0xe2/0xf0 [amdgpu]

This confirmed the hypothesis that we had a pipe
hanging somewhere. Next, after checking the
ftrace entries, we have the below weird
sequence:

 [..]
  2)               |        dcn10_lock_all_pipes [amdgpu]() {
  2)   0.120 us    |          optc1_is_tg_enabled [amdgpu]();
  2)               |          dcn20_pipe_control_lock [amdgpu]() {
  2)               |            dc_dmub_srv_clear_inbox0_ack [amdgpu]() {
  2)   0.121 us    |              amdgpu_dm_dmub_reg_write [amdgpu]();
  2)   0.551 us    |            }
  2)               |            dc_dmub_srv_send_inbox0_cmd [amdgpu]() {
  2)   0.110 us    |              amdgpu_dm_dmub_reg_write [amdgpu]();
  2)   0.511 us    |            }
  2)               |            dc_dmub_srv_wait_for_inbox0_ack [amdgpu]() {
  2)   0.110 us    |              amdgpu_dm_dmub_reg_read [amdgpu]();
  2)   0.110 us    |              amdgpu_dm_dmub_reg_read [amdgpu]();
  2)   0.110 us    |              amdgpu_dm_dmub_reg_read [amdgpu]();
  2)   0.110 us    |              amdgpu_dm_dmub_reg_read [amdgpu]();
  2)   0.110 us    |              amdgpu_dm_dmub_reg_read [amdgpu]();
  2)   0.110 us    |              amdgpu_dm_dmub_reg_read [amdgpu]();
  2)   0.110 us    |              amdgpu_dm_dmub_reg_read [amdgpu]();
 [..]

We are not expected to read from dmub register
so many times and for so long. From the trace log,
it was possible to identify that the function
dcn20_pipe_control_lock was triggering the dmub
operation when it was unnecessary and causing
the hang issue. This commit drops the unnecessary
dmub code and, consequently, fixes the second display not
lighting up the issue.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: allow gfxoff on gc_11_0_3

allow gfxoff on gc_11_0_3

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use update plane and stream routine for DCN32x

Sub-viewport (Subvp) feature is used for changing MCLK without causing
any display artifact, requiring special treatment from the plane and
stream perspective since DC needs to read data from the cache when using
subvp. However, the function dc_commit_updates_for_stream does not
provide all the support needed by this feature which will make this
function legacy at some point. For this reason, this commit enables
dc_update_planes_and_stream for ASICs that support this feature but
preserves the old behavior for other ASICs. However,
dc_update_planes_and_stream should replace dc_commit_updates_for_stream
for all ASICs since it does most of the tasks executed by
dc_commit_updates_for_stream with other extra operations, but we need to
run tests before making this change.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Avoid ABM when ODM combine is enabled for eDP

ODM to combine on the eDP panel with ABM causes the color difference to
the panel since the ABM module only sets one pipe. Hence, this commit
blocks ABM in case of ODM combined on eDP.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update OTG instance in the commit stream

OTG instance is not updated in dc_commit_state_no_check for newly
committed streams because mode_change is not set. Notice that OTG update
is part of the software state, and after hardware programming, it must
be updated; for this reason, this commit updates the OTG offset right
after hardware programming.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Handle seamless boot stream

A seamless boot stream has hardware resources assigned to it, and adding
a new stream means rebuilding the current assignment. It is desirable to
avoid this situation since it may cause light-up issues on the VGA
monitor on USB-C. This commit swaps the seamless boot stream to pipe 0
(if necessary) to ensure that the pipe context matches.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add function for validate and update new stream

DC stream can be seen as a representation of the DCN backend or the data
struct that represents the center of the display pipeline. The front end
(i.e., planes) is connected to the DC stream, and in its turn, streams
are connected to the DC link. Due to this dynamic, DC must handle the
following scenarios:

1. A stream is removed;
2. A new stream is created;
3. An unchanged stream had some updates on its planes.

These combinations require that the new stream data struct become
updated and has a valid global state. For handling multiple corner cases
associated with stream operations, this commit introduces a function
dedicated to manipulating stream changes and invokes the state
validation function after that.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Handle virtual hardware detect

If virtual hardware is detected, there is no reason to run the full
dc_commit_streams process, and DC can return true immediately.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Include surface of unaffected streams

The commit stream function does not include surfaces of unaffected
streams, which may lead to some blank screens during mode change in some
edge cases. This commit adds surfaces of unaffected streams followed by
kernel-doc for documenting some of the fields that participate in this
change.

v2: squash in kerneldoc warning fix (Alex)

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>