H.J. Lu [Fri, 19 May 2017 15:36:06 +0000 (08:36 -0700)]
x86: Add GC testcases with property sections
Verify that debug section is removed by garbage collection when there
is a .note.gnu.property section.
* testsuite/ld-i386/i386.exp: Run property-x86-4a and
property-x86-4b.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/property-x86-4a.d: New file.
* testsuite/ld-i386/property-x86-4a.s: Likewise.
* testsuite/ld-i386/property-x86-4b.d: Likewise.
* testsuite/ld-i386/property-x86-4b.s: Likewise.
* testsuite/ld-x86-64/property-x86-4a.d: Likewise.
* testsuite/ld-x86-64/property-x86-4a.s: Likewise.
* testsuite/ld-x86-64/property-x86-4b.d: Likewise.
* testsuite/ld-x86-64/property-x86-4b.s: Likewise.
Jose E. Marchesi [Fri, 19 May 2017 13:59:41 +0000 (06:59 -0700)]
gas: fix tests call-relax and asi-bump-warn in 32-bit SPARC ELF targets
Tested in targets:
sparc-aout sparc-linux sparc-vxworks sparc64-linux
2017-05-19 Jose E. Marchesi <jose.marchesi@oracle.com>
* testsuite/gas/sparc/call-relax.d: Support 32-bit targets.
* testsuite/gas/sparc/sparc.exp (gas_64_check): Use -64 to
run asi-bump-warn.
eorg-Johann Lay [Fri, 19 May 2017 14:06:33 +0000 (15:06 +0100)]
Update avrxmega3 linker emulation to support avrxmega2 devices with flash memory visible in the SRAM address range.
PR ld/21472
ld * emulparams/avrxmega3.sh (RODATA_PM_OFFSET): Set to 0x8000.
* scripttempl/avr.sc
(__RODATA_PM_OFFSET__) [RODATA_PM_OFFSET]: Use RODATA_PM_OFFSET
as default if not already defined.
(.data) [!RODATA_PM_OFFSET]: Don't include .rodata and friends.
(.rodata) [RODATA_PM_OFFSET]: Put at an offset of
__RODATA_PM_OFFSET__.
gas * config/tc-avr.c (mcu_types): Add entries for: attiny416,
attiny417, attiny816, attiny817.
Rainer Orth [Fri, 19 May 2017 13:08:45 +0000 (15:08 +0200)]
Fix tui compilation with Solaris libcurses: clear define (PR tui/21482)
On both mainline and the 8.0 branch, gdb compilation fails on Solaris 10
with the native libcurses like this:
In file included from /vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/gdb_curses.h:42:
0,
from /vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/tui/tui-data.h:2
6,
from /vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/tui/tui-disasm.c
:31:
/vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/tui/tui-disasm.c: In function `CORE_A
DDR tui_disassemble(gdbarch*, tui_asm_line*, CORE_ADDR, int)':
/vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/tui/tui-disasm.c:71:19: error: `class
string_file' has no member named `wclear'; did you mean `clear'?
gdb_dis_out.clear ();
^
/vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/tui/tui-disasm.c:78:19: error: `class
string_file' has no member named `wclear'; did you mean `clear'?
gdb_dis_out.clear ();
^
make[2]: *** [Makefile:1927: tui-disasm.o] Error 1
It turned out this happens because <curses.h> has
#define clear() wclear(stdscr)
This can be avoided by defining NOMACROS, which the patch below does.
ncurses potentially has a similar problem, which can be avoided by defining
NCURSES_NOMACROS.
PR tui/21482
* gdb_curses.h (NOMACROS): Define.
(NCURSES_NOMACROS): Define.
Rainer Orth [Fri, 19 May 2017 12:16:55 +0000 (14:16 +0200)]
Fix tui compilation with Solaris libcurses: non-const last arg to mvwaddstr (PR tui/21482)
On both mainline and the 8.0 branch, gdb compilation fails on Solaris 10
with the native libcurses in gdb/tui for several instances of the same problem:
/vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/tui/tui-winsource.c: In function `void tui_erase_source_content(tui_win_info*, int)':
/vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/tui/tui-winsource.c:257:18: error: invalid conversion from `const char*' to `char*' [-fpermissive]
no_src_str);
^
In file included from /vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/gdb_curses.h:42:0,
from /vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/tui/tui-data.h:26,
from /vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/tui/tui-winsource.c:33:
/vol/gcc-7/lib/gcc/sparc-sun-solaris2.10/7.1.0/include-fixed/curses.h:699:12: note: initializing argument 4 of `int mvwaddstr(WINDOW*, int, int, char*)'
extern int mvwaddstr(WINDOW *, int, int, char *);
^~~~~~~~~
make[2]: *** [Makefile:1927: tui-winsource.o] Error 1
Unlike ncurses, <curses.h> declares
extern int mvwaddstr(WINDOW *, int, int, char *);
i.e. the last arg is char *, not const char *.
The patch fixes this by casting the last arg to mvwaddstr to char *,
as was recently done on mainline in a newterm() call (the only
difference between 8.0 and mainline gdb/tui).
* tui/tui-windata.c (tui_erase_data_content): Cast last mvwaddstr
arg to char *.
* tui/tui-wingeneral.c (box_win): Likewise.
* tui/tui-winsource.c (tui_erase_source_content): Likewise.
(tui_show_source_line): Likewise.
(tui_show_exec_info_content): Likewise.
Vladimir Mezentsev [Fri, 19 May 2017 10:06:19 +0000 (03:06 -0700)]
gdb: fix TYPE_CODE_ARRAY handling in sparc targets
gdb has a special type (TYPE_CODE_ARRAY) to support the gcc extension
(https://gcc.gnu.org/onlinedocs/gcc/Vector-Extensions.html).
TYPE_CODE_ARRAY is handled incorrectly for both (32- and 64-bit) modes
on Sparc machines.
Tested on sparc64-linux-gnu and sparc-solaris (32- and 64-bit mode).
6 tests ( from gdb/testsuite/gdb.base/gnu_vector.exp) failed on
sparc64-Linux and on sparc-Solaris in 32- and 64-bit mode. Now all
these tests passed. gdb/testsuite/gdb.base/gnu_vector.exp has 117
different cases for small (and not small) arrays and structures.
No regressions.
gdb/ChangeLog:
2017-05-19 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
* sparc-tdep.c (sparc_structure_return_p)
(sparc_arg_on_registers_p): New functions.
(sparc32_store_arguments): Use them.
* sparc64-tdep.c (sparc64_16_byte_align_p)
(sparc64_store_floating_fields, sparc64_extract_floating_fields):
Handle TYPE_CODE_ARRAY.
Alan Modra [Fri, 19 May 2017 03:10:10 +0000 (12:40 +0930)]
garbage collect debug sections when no alloc sections are kept
The pr20882 testcase fails on a number of targets that add attribute
or note sections to object files, and the default linker script says
those sections should be kept. This patch changes --gc-sections to
drop debug and special sections like .comment when no SEC_ALLOC
section in an object file is kept. The assumption is that debug
sections are describing code and data that will become part of the
final image in memory.
* elflink.c (_bfd_elf_gc_mark_extra_sections): Don't keep
debug and special sections when no non-note alloc sections in an
object are kept.
Eli Zaretskii [Fri, 19 May 2017 08:05:59 +0000 (11:05 +0300)]
Avoid MinGW compilation warning in readline/input.c
This change was already accepted upstream in Readline.
readline/ChangeLog.gdb:
2017-05-19 Eli Zaretskii <eliz@gnu.org>
* input.c [_WIN32]: Include <conio.h> to avoid compiler warning on
MinGW.
Maciej W. Rozycki [Fri, 19 May 2017 06:53:21 +0000 (07:53 +0100)]
MIPS/binutils/testsuite: Bail out right away if !ELF
We have but ELF binutils tests in the MIPS subset, and non-ELF MIPS/GAS
ports are gone, making a future addition of any non-ELF tests unlikely.
Bail out right away then if non-ELF, consuming one level of indentation
across the actual tests run.
binutils/
* testsuite/binutils-all/mips/mips.exp: Bail out right away if
non-ELF.
GDB Administrator [Fri, 19 May 2017 00:00:39 +0000 (00:00 +0000)]
Automatic date update in version.in
Tom Tromey [Thu, 18 May 2017 23:31:41 +0000 (17:31 -0600)]
Fix test failure with Rust 1.18 and 1.19
With Rust 1.18 and 1.19, I saw some test suite failures. They were
all of the same form -- Box seems to be qualified in the output now,
like:
print box_some
$64 = core::option::Option<alloc::boxed::Box<u8>>::Some(0x7ffff6c21018 "\001\000")
... where the test was expecting Option<Box<u8>>.
This patch fixes the problem in a way that should work with earlier
versions of Rust.
gdb/testsuite/ChangeLog
2017-05-18 Tom Tromey <tom@tromey.com>
* gdb.rust/simple.exp: Allow Box to be qualified.
Thomas Preud'homme [Thu, 18 May 2017 15:31:40 +0000 (16:31 +0100)]
Expect prompt after no FPU warning
2017-05-18 Thomas Preud'homme <thomas.preudhomme@arm.com>
gdb/testsuite/
* gdb.base/float.exp: Expect GDB prompt for targets without FPU.
Nick Clifton [Thu, 18 May 2017 14:07:59 +0000 (15:07 +0100)]
Treat a prefix of "$SYSROOT" in the same way as "=" when parsing linker search paths.
PR ld/21251
* ldfile.c (ldfile_add_library_path): If the path starts with
$SYSROOT then use the sysroot as the real prefix.
* ldlang.c (lang_add_input_file): Treat $SYSROOT in the same
way as =.
* ldlex.l: Add $SYSROOT as allow prefix for a filename.
* ld.texinfo (-L): Document that $SYSROOT acts like = when
prefixing a library search path.
(INPUT): Likewise.
* testsuite/ld-scripts/sysroot-prefix.exp: Add $SYSROOT prefix
tests.
Pedro Alves [Thu, 18 May 2017 10:40:08 +0000 (11:40 +0100)]
gdb.base/fileio.c: Fix several -Wmaybe-uninitialized warnings
src/gdb/testsuite/gdb.base/fileio.c: In function ‘test_write’:
src/gdb/testsuite/gdb.base/fileio.c:158:5: warning: ‘ret’ may be used uninitialized in this function [-Wmaybe-uninitialized]
printf ("write 1: ret = %d, errno = %d\n", ret, errno);
^
gdb/ChangeLog:
2017-05-18 Pedro Alves <palves@redhat.com>
* gdb.base/fileio.c (test_write, test_read, test_close)
(test_fstat): Don't print 'ret' in the fail path.
Pedro Alves [Thu, 18 May 2017 10:37:55 +0000 (11:37 +0100)]
gdb.base/fileio.c: Fix several -Wreturn-type warnings
All the "test_" functions warn like:
src/gdb/testsuite/gdb.base/fileio.c: In function ‘test_close’:
src/gdb/testsuite/gdb.base/fileio.c:280:1: warning: control reaches end of non-void function [-Wreturn-type]
}
^
Nothing looks at the return of these functions, so just make them
return void. While at it, "()" is not the same as "(void)" in C - fix
that too.
gdb/ChangeLog:
2017-05-18 Pedro Alves <palves@redhat.com>
* gdb.base/fileio.c (stop, test_open, test_write, test_read)
(test_lseek, test_close, test_stat, test_fstat, test_isatty)
(test_system, test_rename, test_unlink, test_time): Change
prototypes.
* gdb.base/fileio.exp (stop_msg): Adjust.
Pedro Alves [Thu, 18 May 2017 10:47:05 +0000 (11:47 +0100)]
gdb.base/fileio.exp: Remove nowarnings
... and quiet -Wnonnull in a different way.
gdb/testsuite/ChangeLog:
2017-05-18 Pedro Alves <palves@redhat.com>
* gdb.base/fileio.c (null_str): New global.
(test_stat): Use it.
* gdb.base/fileio.exp: Remove nowarnings.
Alan Modra [Thu, 18 May 2017 07:21:48 +0000 (16:51 +0930)]
fix changelog typo
Alan Modra [Thu, 18 May 2017 05:17:40 +0000 (14:47 +0930)]
Don't compare boolean values against TRUE or FALSE
bfd/
* arc-got.h: Don't compare boolean values against TRUE or FALSE.
* elf-m10300.c: Likewise.
* elf.c: Likewise.
* elf32-arc.c: Likewise.
* elf32-bfin.c: Likewise.
* elf32-m68k.c: Likewise.
* elf32-nds32.c: Likewise.
* elf32-tilepro.c: Likewise.
* elflink.c: Likewise.
* elfnn-aarch64.c: Likewise.
* elfnn-riscv.c: Likewise.
* elfxx-tilegx.c: Likewise.
* mach-o.c: Likewise.
* peXXigen.c: Likewise.
* vms-alpha.c: Likewise.
* vms-lib.c: Likewise.
opcodes/
* aarch64-asm.c: Don't compare boolean values against TRUE or FALSE.
* aarch64-dis.c: Likewise.
* aarch64-gen.c: Likewise.
* aarch64-opc.c: Likewise.
binutils/
* strings.c: Don't compare boolean values against TRUE or FALSE.
gas/
* config/tc-aarch64.c: Don't compare booleans against TRUE or FALSE.
* config/tc-hppa.c: Likewise.
* config/tc-mips.c: Likewise.
* config/tc-score7.c: Likewise.
ld/
* emultempl/elf32.em: Don't compare boolean values against TRUE or FALSE.
* emultempl/pe.em: Likewise.
* emultempl/pep.em: Likewise.
* emultempl/xtensaelf.em: Likewise.
Alan Modra [Thu, 18 May 2017 04:58:17 +0000 (14:28 +0930)]
pr20882 testcase
-gdwarf-sections doesn't work on targets that lack support to emit
address size relative relocs. The testcase as it was avoided
-gdwarf-sections doing anything by providing a non-empty .debug_line.
It's better to not use -gdwarf-sections. Also, the testcase failed
to match the output for 16-bit address targets like avr.
PR ld/20882
* testsuite/ld-gc/pr20882.d: Don't pass -gdwarf-sections to gas.
Allow for 16-bit address targets and match expected data fully.
* testsuite/ld-gc/pr20882a.s: Delete .debug_line section.
* testsuite/ld-gc/pr20882b.s: Likewise.
* testsuite/ld-gc/pr20882c.s: Likewise.
GDB Administrator [Thu, 18 May 2017 00:00:47 +0000 (00:00 +0000)]
Automatic date update in version.in
H.J. Lu [Wed, 17 May 2017 14:57:15 +0000 (07:57 -0700)]
Mark debug sections referenced by kept debug sections
If a debug section is referenced by a kept debug section, it should
also be kept.
Some targets, like mips, keep input files when there are some special
sections, like .gnu.attributes, even if input file is unused otherwise.
In this case, all debug sections are kept. The new test will fail on
such targets. We can either fix those targets or XFAIL the test.
bfd/
PR ld/20882
* elflink.c (elf_gc_mark_debug_section): New function.
(_bfd_elf_gc_mark_extra_sections): Mark any debug sections
referenced by kept debug sections.
ld/
PR ld/20882
* testsuite/ld-gc/gc.exp: Run pr20882.
* testsuite/ld-gc/pr20882.d: New file.
* testsuite/ld-gc/pr20882a.s: Likewise.
* testsuite/ld-gc/pr20882b.s: Likewise.
* testsuite/ld-gc/pr20882c.s: Likewise.
Yao Qi [Wed, 17 May 2017 13:46:17 +0000 (14:46 +0100)]
Add nowarnings in gdb.base/fileio.exp
I see the following warning in gdb.base/fileio.c,
testsuite/gdb.base/fileio.c:297:3: warning: null argument where non-null required (argument 1) [-Wnonnull]
ret = stat (NULL, &st);
^
This patch adds "nowarnings" to the list passed to gdb_compile.
gdb/testsuite:
2017-05-17 Yao Qi <yao.qi@linaro.org>
* gdb.base/fileio.exp: Pass nowarnings to gdb_compile.
Yao Qi [Wed, 17 May 2017 13:22:04 +0000 (14:22 +0100)]
Add alias command to cmd_list_element
When we add alias command, we call add_alias_cmd and pass the alias name
and command name. This implicitly requires the command and its prefix
commands are already added to cmdlist. This may not be true, for example,
add_com_alias ("tty", "set inferior-tty", class_alias, 0);
"inferior-tty" command is added to setlist, but setlist may not be added
to cmdlist (It depends on the order of related _initialize_XXX functions
called) so that we can't find "set inferior-tty" from cmdlist.
This patch fixes this problem by passing cmd_list_element of "inferior-tty"
to add_alias_cmd, so that cmd_list_element of "inferior-tty" doesn't have
to be reachable from cmdlist at that moment.
gdb:
2017-05-17 Yao Qi <yao.qi@linaro.org>
* cli/cli-decode.c (add_alias_cmd): New function.
* command.h (add_alias_cmd): Declare.
* infcmd.c (_initialize_infcmd): Don't call add_com_alias,
instead call add_alias_cmd.
gdb/testsuite:
2017-05-17 Simon Marchi <simon.marchi@ericsson.com>
* gdb.base/set-inferior-tty.exp (test_set_inferior_tty): Add
argument command.
(top-level): Invoke test_set_inferior_tty.
Pedro Alves [Wed, 17 May 2017 12:56:19 +0000 (13:56 +0100)]
nat_extra_makefile_frag -> nat_makefile_frag
gdb/ChangeLog:
2017-05-17 Pedro Alves <palves@redhat.com>
* Makefile.in (nat_extra_makefile_frag): Rename to ...
(nat_makefile_frag): ... this. All references updated.
* configure.ac: Likewise.
* configure.nat: Likewise. Enhance comments.
* configure: Regenerate.
Andreas Krebbel [Wed, 17 May 2017 10:39:39 +0000 (12:39 +0200)]
S/390: Fix arch level of pckmo instruction.
Fix wrong architecture level of PCKMO instruction.
Committed to mainline.
opcodes/ChangeLog:
2017-05-17 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-opc.txt: PCKMO change arch level to z196.
gas/ChangeLog:
2017-05-17 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* testsuite/gas/s390/zarch-z10.d: Remove pckmo.
* testsuite/gas/s390/zarch-z10.s: Remove pckmo.
* testsuite/gas/s390/zarch-z196.d: Add pckmo.
* testsuite/gas/s390/zarch-z196.s: Add pckmo.
GDB Administrator [Wed, 17 May 2017 00:00:53 +0000 (00:00 +0000)]
Automatic date update in version.in
H.J. Lu [Tue, 16 May 2017 16:09:20 +0000 (09:09 -0700)]
H.J. Lu [Tue, 16 May 2017 15:52:01 +0000 (08:52 -0700)]
Run PR ld/21481 tests only if IFUNC is supported
PR ld/21481
* testsuite/ld-x86-64/x86-64.exp: Run PR ld/21481 tests only
if IFUNC is supported by run-time.
Alan Modra [Mon, 15 May 2017 23:13:24 +0000 (08:43 +0930)]
Allow target files access to default TC_FORCE_RELOCATION defines
* write.c (GENERIC_FORCE_RELOCATION_LOCAL): Define.
(TC_FORCE_RELOCATION_LOCAL): Use it.
(GENERIC_FORCE_RELOCATION_SUB_SAME): Define.
(TC_FORCE_RELOCATION_SUB_SAME): Use it.
* config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL,
TC_FORCE_RELOCATION_SUB_SAME): Use GENERIC defines.
* config/tc-aarch64.h: Similarly.
* config/tc-avr.h: Similarly.
* config/tc-cris.h: Similarly.
* config/tc-i386.h: Similarly.
* config/tc-i960.h: Similarly.
* config/tc-ia64.h: Similarly.
* config/tc-microblaze.h: Similarly.
* config/tc-mips.h: Similarly.
* config/tc-msp430.h: Similarly.
* config/tc-nds32.h: Similarly.
* config/tc-pru.h: Similarly.
* config/tc-riscv.h: Similarly.
* config/tc-rl78.h: Similarly.
* config/tc-s390.h: Similarly.
* config/tc-sh.h: Similarly.
* config/tc-sh64.h: Similarly.
* config/tc-sparc.h: Similarly.
* config/tc-xtensa.h: Similarly.
* config/tc-mn10300.h: Similarly.
(GENERIC_FORCE_RELOCATION_LOCAL): Define.
* config/tc-msp430.c (msp430_force_relocation_local): Modify to
be addition to rather than replacement of standard
TC_FORCE_RELOCATION_LOCAL.
Alan Modra [Mon, 15 May 2017 22:28:14 +0000 (07:58 +0930)]
Rename non_ir_ref to non_ir_ref_regular
Since the flag is now set only for regular object refs.
include/
* bfdlink.h (struct bfd_link_hash_entry <non_ir_ref>): Rename to
non_ir_ref_regular.
bfd/
* elf-m10300.c: Rename occurrences of non_ir_ref.
* elf32-arm.c: Likewise.
* elf32-bfin.c: Likewise.
* elf32-cr16.c: Likewise.
* elf32-cris.c: Likewise.
* elf32-d10v.c: Likewise.
* elf32-dlx.c: Likewise.
* elf32-fr30.c: Likewise.
* elf32-frv.c: Likewise.
* elf32-hppa.c: Likewise.
* elf32-i370.c: Likewise.
* elf32-i386.c: Likewise.
* elf32-iq2000.c: Likewise.
* elf32-lm32.c: Likewise.
* elf32-m32c.c: Likewise.
* elf32-m32r.c: Likewise.
* elf32-m68hc1x.c: Likewise.
* elf32-m68k.c: Likewise.
* elf32-mcore.c: Likewise.
* elf32-metag.c: Likewise.
* elf32-microblaze.c: Likewise.
* elf32-moxie.c: Likewise.
* elf32-msp430.c: Likewise.
* elf32-mt.c: Likewise.
* elf32-nios2.c: Likewise.
* elf32-or1k.c: Likewise.
* elf32-ppc.c: Likewise.
* elf32-rl78.c: Likewise.
* elf32-s390.c: Likewise.
* elf32-score.c: Likewise.
* elf32-score7.c: Likewise.
* elf32-sh.c: Likewise.
* elf32-tic6x.c: Likewise.
* elf32-tilepro.c: Likewise.
* elf32-v850.c: Likewise.
* elf32-vax.c: Likewise.
* elf32-xstormy16.c: Likewise.
* elf32-xtensa.c: Likewise.
* elf64-alpha.c: Likewise.
* elf64-hppa.c: Likewise.
* elf64-ia64-vms.c: Likewise.
* elf64-mmix.c: Likewise.
* elf64-ppc.c: Likewise.
* elf64-s390.c: Likewise.
* elf64-sh64.c: Likewise.
* elf64-x86-64.c: Likewise.
* elflink.c: Likewise.
* elfnn-aarch64.c: Likewise.
* elfnn-ia64.c: Likewise.
* elfnn-riscv.c: Likewise.
* elfxx-mips.c: Likewise.
* elfxx-sparc.c: Likewise.
* elfxx-tilegx.c: Likewise.
* linker.c: Likewise.
ld/
* plugin.c: Rename occurrences of non_ir_ref.
Alan Modra [Mon, 15 May 2017 22:26:41 +0000 (07:56 +0930)]
non_ir_ref_dynamic
dynamic_ref_after_ir_def is a little odd compared to other symbol
flags in that as the name suggests, it is set only for certain
references after a definition. It turns out that setting a flag for
any non-ir reference from a dynamic object can be used to solve the
problem for which this flag was invented, which I think is a cleaner.
This patch does that, and sets non_ir_ref only for regular object
references.
include/
* bfdlink.h (struct bfd_link_hash_entry): Update non_ir_ref
comment. Rename dynamic_ref_after_ir_def to non_ir_ref_dynamic.
ld/
* plugin.c (is_visible_from_outside): Use non_ir_ref_dynamic.
(plugin_notice): Set non_ir_ref for references from regular
objects, non_ir_ref_dynamic for references from dynamic objects.
bfd/
* elf64-ppc.c (add_symbol_adjust): Transfer non_ir_ref_dynamic.
* elflink.c (elf_link_add_object_symbols): Update to use
non_ir_ref_dynamic.
(elf_link_input_bfd): Test non_ir_ref_dynamic in addition to
non_ir_ref.
* linker.c (_bfd_generic_link_add_one_symbol): Likewise.
GDB Administrator [Tue, 16 May 2017 00:00:31 +0000 (00:00 +0000)]
Automatic date update in version.in
Eric Christopher [Mon, 15 May 2017 22:59:52 +0000 (15:59 -0700)]
2017-05-15 Eric Christopher <echristo@gmail.com>
* layout.cc (Layout::segment_precedes): Add a case for testing
pointer equality when determining which segment precedes
another.
Jeff Law [Mon, 15 May 2017 16:48:41 +0000 (10:48 -0600)]
2017-05-15 Jeff Law <law@redhat.com>
* readelf.c (display_arc_attribute): Avoid implicit fallthru.
Nick Clifton [Mon, 15 May 2017 14:29:02 +0000 (15:29 +0100)]
Fix use of ARM ADR and ADRl pseudo-instructions with thumb function symbols.
PR gas/21458
* config/tc-arm.c (do_adr): If the ADR involves a thumb function
symbol, ensure that the T bit will be set.
(do_adrl): Likewise.
(do_t_adr): Likewise.
* testsuite/gas/arm/pr21458.s: New test.
* testsuite/gas/arm/pr21458.d: New test driver.
Maciej W. Rozycki [Mon, 15 May 2017 12:52:04 +0000 (13:52 +0100)]
MIPS16e2: Add new MIPS16e2 relaxation GAS and LD tests
Verify MIPS16 PC-relative instruction relaxation using the MIPS16e2 LUI
instruction rather than an LI/SLL instruction pair.
gas/
* testsuite/gas/mips/mips16-pcrel-1.d: Remove `-mips3' from `as'
flags.
* testsuite/gas/mips/mips16-pcrel-pic-1.d: Likewise.
* testsuite/gas/mips/mips16-pcrel-n32-0.d: Likewise.
* testsuite/gas/mips/mips16-pcrel-n32-1.d: Likewise.
* testsuite/gas/mips/mips16-pcrel-n64-0.d: Likewise.
* testsuite/gas/mips/mips16-pcrel-n64-1.d: Likewise.
* testsuite/gas/mips/mips16-pcrel-n64-sym32-0.d: Likewise.
* testsuite/gas/mips/mips16-pcrel-n64-sym32-1.d: Likewise.
* testsuite/gas/mips/mips16-pcrel-reloc-4.d: Likewise.
* testsuite/gas/mips/mips16-pcrel-reloc-5.d: Likewise.
* testsuite/gas/mips/mips16-pcrel-reloc-6.d: Likewise.
* testsuite/gas/mips/mips16-pcrel-reloc-7.d: Likewise.
* testsuite/gas/mips/mips16-pcrel-addend-4.d: Likewise.
* testsuite/gas/mips/mips16-pcrel-addend-5.d: Likewise.
* testsuite/gas/mips/mips16-pcrel-addend-6.d: Likewise.
* testsuite/gas/mips/mips16-pcrel-addend-7.d: Likewise.
* testsuite/gas/mips/mips16-pcrel-addend-9.d: Likewise.
* testsuite/gas/mips/mips16-pcrel-addend-pic-9.d: Likewise.
* testsuite/gas/mips/mips16-pcrel-addend-n32-8.d: Likewise.
* testsuite/gas/mips/mips16-pcrel-addend-n32-9.d: Likewise.
* testsuite/gas/mips/mips16-pcrel-addend-n64-sym32-8.d:
Likewise.
* testsuite/gas/mips/mips16-pcrel-addend-n64-sym32-9.d:
Likewise.
* testsuite/gas/mips/mips16-pcrel-addend-n64-8.d: Likewise.
* testsuite/gas/mips/mips16-pcrel-addend-n64-9.d: Likewise.
* testsuite/gas/mips/mips16-pcrel-absolute-2.d: Likewise.
* testsuite/gas/mips/mips16-pcrel-absolute-3.d: Likewise.
* testsuite/gas/mips/mips16-pcrel-absolute-6.d: Likewise.
* testsuite/gas/mips/mips16-pcrel-absolute-7.d: Likewise.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-6.d: Likewise.
* testsuite/gas/mips/mips16-pcrel-absolute-n32-4.d: Likewise.
* testsuite/gas/mips/mips16-pcrel-absolute-n32-6.d: Likewise.
* testsuite/gas/mips/mips16-pcrel-absolute-n64-4.d: Likewise.
* testsuite/gas/mips/mips16-pcrel-absolute-n64-6.d: Likewise.
* testsuite/gas/mips/mips16-pcrel-absolute-n64-sym32-4.d:
Likewise.
* testsuite/gas/mips/mips16-pcrel-absolute-n64-sym32-6.d:
Likewise.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-n32-4.d:
Likewise.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-n32-6.d:
Likewise.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-n64-4.d:
Likewise.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-n64-6.d:
Likewise.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-n64-sym32-4.d:
Likewise.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-n64-sym32-6.d:
Likewise.
* testsuite/gas/mips/mips16e2@mips16-pcrel-0.d: New test.
* testsuite/gas/mips/mips16e2@mips16-pcrel-1.d: New test.
* testsuite/gas/mips/mips16e2@mips16-pcrel-2.d: New test.
* testsuite/gas/mips/mips16e2@mips16-pcrel-n32-0.d: New test.
* testsuite/gas/mips/mips16e2@mips16-pcrel-n32-1.d: New test.
* testsuite/gas/mips/mips16e2@mips16-pcrel-n64-sym32-0.d: New
test.
* testsuite/gas/mips/mips16e2@mips16-pcrel-n64-sym32-1.d: New
test.
* testsuite/gas/mips/mips16e2@mips16-pcrel-delay-0.d: New test.
* testsuite/gas/mips/mips16e2@mips16-pcrel-delay-1.d: New test.
* testsuite/gas/mips/mips16e2@mips16-pcrel-reloc-2.d: New test.
* testsuite/gas/mips/mips16e2@mips16-pcrel-reloc-3.d: New test.
* testsuite/gas/mips/mips16e2@mips16-pcrel-reloc-6.d: New test.
* testsuite/gas/mips/mips16e2@mips16-pcrel-reloc-7.d: New test.
* testsuite/gas/mips/mips16e2@mips16-pcrel-addend-2.d: New test.
* testsuite/gas/mips/mips16e2@mips16-pcrel-addend-3.d: New test.
* testsuite/gas/mips/mips16e2@mips16-pcrel-addend-6.d: New test.
* testsuite/gas/mips/mips16e2@mips16-pcrel-addend-7.d: New test.
* testsuite/gas/mips/mips16e2@mips16-pcrel-addend-8.d: New test.
* testsuite/gas/mips/mips16e2@mips16-pcrel-addend-9.d: New test.
* testsuite/gas/mips/mips16e2@mips16-pcrel-addend-n32-8.d: New
test.
* testsuite/gas/mips/mips16e2@mips16-pcrel-addend-n32-9.d: New
test.
* testsuite/gas/mips/mips16e2@mips16-pcrel-addend-n64-sym32-8.d:
New test.
* testsuite/gas/mips/mips16e2@mips16-pcrel-addend-n64-sym32-9.d:
New test.
* testsuite/gas/mips/mips16e2@mips16-pcrel-absolute.d: New test.
* testsuite/gas/mips/mips16e2@mips16-pcrel-absolute-1.d: New
test.
* testsuite/gas/mips/mips16e2@mips16-pcrel-absolute-2.d: New
test.
* testsuite/gas/mips/mips16e2@mips16-pcrel-absolute-3.d: New
test.
* testsuite/gas/mips/mips16e2@mips16-pcrel-absolute-4.d: New
test.
* testsuite/gas/mips/mips16e2@mips16-pcrel-absolute-5.d: New
test.
* testsuite/gas/mips/mips16e2@mips16-pcrel-absolute-6.d: New
test.
* testsuite/gas/mips/mips16e2@mips16-pcrel-absolute-7.d: New
test.
* testsuite/gas/mips/mips16e2@mips16-pcrel-absolute-pic-4.d: New
test.
* testsuite/gas/mips/mips16e2@mips16-pcrel-absolute-pic-6.d: New
test.
* testsuite/gas/mips/mips16e2@mips16-pcrel-absolute-n32-4.d: New
test.
* testsuite/gas/mips/mips16e2@mips16-pcrel-absolute-n32-6.d: New
test.
* testsuite/gas/mips/mips16e2@mips16-pcrel-absolute-n64-sym32-4.d:
New test.
* testsuite/gas/mips/mips16e2@mips16-pcrel-absolute-n64-sym32-6.d:
New test.
* testsuite/gas/mips/mips16e2@mips16-pcrel-absolute-pic-n32-4.d:
New test.
* testsuite/gas/mips/mips16e2@mips16-pcrel-absolute-pic-n32-6.d:
New test.
* testsuite/gas/mips/mips16e2@mips16-pcrel-absolute-pic-n64-sym32-4.d:
New test.
* testsuite/gas/mips/mips16e2@mips16-pcrel-absolute-pic-n64-sym32-6.d:
New test.
* testsuite/gas/mips/mips16-pcrel-1.l: Adjust line numbers.
* testsuite/gas/mips/mips16-pcrel-1.s: Adjust for alignment
preservation between MIPS16 and MIPS16e2 code.
* testsuite/gas/mips/mips.exp: Run MIPS16 relaxation tests over
all MIPS16 architectures.
ld/
* testsuite/ld-mips-elf/mips16e2-pcrel-0.d: New test.
* testsuite/ld-mips-elf/mips16e2-pcrel-1.d: New test.
* testsuite/ld-mips-elf/mips16e2-pcrel-addend-2.d: New test.
* testsuite/ld-mips-elf/mips16e2-pcrel-addend-6.d: New test.
* testsuite/ld-mips-elf/mips16e2-pcrel-n32-0.d: New test.
* testsuite/ld-mips-elf/mips16e2-pcrel-n32-1.d: New test.
* testsuite/ld-mips-elf/mips16e2-pcrel-n64-sym32-0.d: New test.
* testsuite/ld-mips-elf/mips16e2-pcrel-n64-sym32-1.d: New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
Maciej W. Rozycki [Mon, 15 May 2017 12:45:42 +0000 (13:45 +0100)]
MIPS16e2: Add new MIPS16e2 ASE binutils and GAS tests
Verify MIPS16e2 ASE instruction assembly, disassembly and object file
flags.
binutils/
* testsuite/binutils-all/mips/mips16-undecoded.d: Add `-mips3'
to `as' flags.
* testsuite/binutils-all/mips/mips16e2-undecoded.d: New test.
* testsuite/binutils-all/mips/mips16e2-extend-insn.d: New test.
* testsuite/binutils-all/mips/mips16-undecoded.s: Remove
`.module mips3'.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
gas/
* testsuite/gas/mips/mips16e2.d: New test.
* testsuite/gas/mips/mips16e2-mt.d: New test.
* testsuite/gas/mips/mips16e2-sub.d: New test.
* testsuite/gas/mips/mips16e2@mips16e2-sub.d: New test.
* testsuite/gas/mips/mips16e2-mt-sub.d: New test.
* testsuite/gas/mips/mips16e2@mips16e2-mt-sub.d: New test.
* testsuite/gas/mips/mips16e2-hilo.d: New test.
* testsuite/gas/mips/mips16e2-hilo-n32.d: New test.
* testsuite/gas/mips/mips16e2-reloc-error.d: New test.
* testsuite/gas/mips/mips16e2-imm-error.d: New test.
* testsuite/gas/mips/elf_ase_mips16e2.d: New test.
* testsuite/gas/mips/elf_ase_mips16e2-2.d: New test.
* testsuite/gas/mips/elf-rel9-mips16e2.d: New test.
* testsuite/gas/mips/mips16e2-lui.d: New test.
* testsuite/gas/mips/mips16e2@mips32r2-sync.d: New test.
* testsuite/gas/mips/mips16e2@mips32r2-sync-1.d: New test.
* testsuite/gas/mips/mips16e2@lui-2.d: New test.
* testsuite/gas/mips/mips16e2-reloc-error.l: New stderr output.
* testsuite/gas/mips/mips16e2-imm-error.l: New stderr output.
* testsuite/gas/mips/mips16e2@lui-2.l: New stderr output.
* testsuite/gas/mips/mips16e2.s: New test source.
* testsuite/gas/mips/mips16e2-mt.s: New test source.
* testsuite/gas/mips/mips16e2-sub.s: New test source.
* testsuite/gas/mips/mips16e2-mt-sub.s: New test source.
* testsuite/gas/mips/mips16e2-hilo.s: New test source.
* testsuite/gas/mips/mips16e2-reloc-error.s: New test source.
* testsuite/gas/mips/mips16e2-imm-error.s: New test source.
* testsuite/gas/mips/elf-rel9-mips16e2.s: New test source.
* testsuite/gas/mips/mips16e2-lui.s: New test source.
* testsuite/gas/mips/mips.exp: Expand `mips32r2-sync',
`mips32r2-sync-1', `lui-1' and `lui-2' tests across MIPS16e2
architectures. Run the new tests.
Maciej W. Rozycki [Mon, 15 May 2017 12:40:50 +0000 (13:40 +0100)]
MIPS16e2: Add MIPS16e2 ASE GAS test infrastructure
Define a new 32-bit and 64-bit MIPS16e2 test architecture and adjust
existing tests now run against these architectures accordingly.
gas/
* testsuite/gas/mips/mips.exp (run_dump_test_arch): Add
`mips16e2@' prefix.
(run_list_test_arch): Likewise.
(mips16e2-32, mips16e2-64): New architectures.
* testsuite/gas/mips/mips16e2-32@mips16-macro.d: New test.
* testsuite/gas/mips/mips16e2-32@mips16-macro-t.d: New test.
* testsuite/gas/mips/mips16e2-32@mips16-macro-e.d: New test.
* testsuite/gas/mips/mips16e2-32@mips16-insn-t.d: New test.
* testsuite/gas/mips/mips16e2-32@mips16-insn-e.d: New test.
* testsuite/gas/mips/mips16e2-32@mips16e-64.d: New test.
* testsuite/gas/mips/mips16e2-32@mips16-sub.d: New test.
* testsuite/gas/mips/mips16e2-32@mips16e-64-sub.d: New test.
* testsuite/gas/mips/mips16e2@relax-swap3.d: New test.
* testsuite/gas/mips/mips16-32@mips16-asmacro.d: Remove `source'
tag. Add `-I$srcdir/$subdir' to `as' flags.
* testsuite/gas/mips/mips16-64@mips16-asmacro.d: Likewise.
* testsuite/gas/mips/mips16e2-32@mips16-macro.l: New stderr
output.
* testsuite/gas/mips/mips16e2-32@mips16-macro-t.l: New stderr
output.
* testsuite/gas/mips/mips16e2-32@mips16-macro-e.l: New stderr
output.
* testsuite/gas/mips/mips16e2-32@mips16-insn-t.l: New stderr
output.
* testsuite/gas/mips/mips16e2-32@mips16-insn-e.l: New stderr
output.
* testsuite/gas/mips/mips16-sub.s: Add `.set nomips16e2'.
* testsuite/gas/mips/mips16e-sub.s: Likewise.
* testsuite/gas/mips/mips16e-64-sub.s: Likewise.
* testsuite/gas/mips/mips16-asmacro.s: Remove `.set mips32'.
* testsuite/gas/mips/mips16-32@mips16-asmacro.s: New test
source.
* testsuite/gas/mips/mips16-64@mips16-asmacro.s: New test
source.
Maciej W. Rozycki [Mon, 15 May 2017 12:26:01 +0000 (13:26 +0100)]
MIPS16e2: Add MIPS16e2 ASE support
Add MIPS16e2 ASE support as per the architecture specification[1],
including in particular:
1. A new ELF ASE flag to mark MIPS16e2 binaries.
2. MIPS16e2 instruction assembly support, including a relaxation update
to use LUI rather than an LI/SLL instruction pair for loading the
high part of 32-bit addresses.
3. MIPS16e2 instruction disassembly support, including updated rules for
extended forms of instructions that are now subdecoded and therefore
do not alias to the original MIPS16 ISA revision instructions even
for encodings that are not valid in the MIPS16e2 instruction set.
Add `-mmips16e2' and `-mno-mips16e2' GAS command-line options and their
corresponding `mips16e2' and `no-mips16e2' settings for the `.set' and
`.module' pseudo-ops. Control the availability of the MT ASE subset of
the MIPS16e2 instruction set with a combination of these controls and
the preexisting MT ASE controls.
Parts of this change by Matthew Fortune and Andrew Bennett.
References:
[1] "MIPS32 Architecture for Programmers: MIPS16e2 Application-Specific
Extension Technical Reference Manual", Imagination Technologies
Ltd., Document Number: MD01172, Revision 01.00, April 26, 2016
include/
* elf/mips.h (AFL_ASE_MIPS16E2): New macro.
(AFL_ASE_MASK): Adjust accordingly.
* opcode/mips.h: Document new operand codes defined.
(mips_operand_type): Add OP_REG28 enum value.
(INSN2_SHORT_ONLY): Update description.
(ASE_MIPS16E2, ASE_MIPS16E2_MT): New macros.
bfd/
* elfxx-mips.c (print_mips_ases): Handle MIPS16e2 ASE.
opcodes/
* mips-dis.c (mips_arch_choices): Add ASE_MIPS16E2 and
ASE_MIPS16E2_MT flags to the unnamed MIPS16 entry.
(mips_convert_abiflags_ases): Handle the AFL_ASE_MIPS16E2 flag.
(print_insn_arg) <OP_REG28>: Add handler.
(validate_insn_args) <OP_REG28>: Handle.
(print_mips16_insn_arg): Handle MIPS16 instructions that require
32-bit encoding and 9-bit immediates.
(print_insn_mips16): Handle MIPS16 instructions that require
32-bit encoding and MFC0/MTC0 operand decoding.
* mips16-opc.c (decode_mips16_operand) <'>', '9', 'G', 'N', 'O'>
<'Q', 'T', 'b', 'c', 'd', 'r', 'u'>: Add handlers.
(RD_C0, WR_C0, E2, E2MT): New macros.
(mips16_opcodes): Add entries for MIPS16e2 instructions:
GP-relative "addiu" and its "addu" spelling, "andi", "cache",
"di", "ehb", "ei", "ext", "ins", GP-relative "lb", "lbu", "lh",
"lhu", and "lw" instructions, "ll", "lui", "lwl", "lwr", "mfc0",
"movn", "movtn", "movtz", "movz", "mtc0", "ori", "pause",
"pref", "rdhwr", "sc", GP-relative "sb", "sh" and "sw"
instructions, "swl", "swr", "sync" and its "sync_acquire",
"sync_mb", "sync_release", "sync_rmb" and "sync_wmb" aliases,
"xori", "dmt", "dvpe", "emt" and "evpe". Add split
regular/extended entries for original MIPS16 ISA revision
instructions whose extended forms are subdecoded in the MIPS16e2
ISA revision: "li", "sll" and "srl".
binutils/
* readelf.c (print_mips_ases): Handle MIPS16e2 ASE.
* NEWS: Mention MIPS16e2 ASE support.
gas/
* config/tc-mips.c (RELAX_MIPS16_ENCODE): Add `e2' flag.
(RELAX_MIPS16_E2): New macro.
(RELAX_MIPS16_PIC, RELAX_MIPS16_SYM32, RELAX_MIPS16_NOMACRO)
(RELAX_MIPS16_USER_SMALL, RELAX_MIPS16_USER_EXT)
(RELAX_MIPS16_DSLOT, RELAX_MIPS16_JAL_DSLOT)
(RELAX_MIPS16_EXTENDED, RELAX_MIPS16_MARK_EXTENDED)
(RELAX_MIPS16_CLEAR_EXTENDED, RELAX_MIPS16_ALWAYS_EXTENDED)
(RELAX_MIPS16_MARK_ALWAYS_EXTENDED)
(RELAX_MIPS16_CLEAR_ALWAYS_EXTENDED, RELAX_MIPS16_MACRO)
(RELAX_MIPS16_MARK_MACRO, RELAX_MIPS16_CLEAR_MACRO): Shift bits.
(mips16_immed_extend): New prototype.
(options): Add OPTION_MIPS16E2 and OPTION_NO_MIPS16E2 enum
values.
(md_longopts): Add "mmips16e2" and "mno-mips16e2" options.
(mips_ases): Add "mips16e2" entry.
(mips_set_ase): Handle MIPS16e2 ASE.
(insn_insert_operand): Explicitly handle immediates with MIPS16
instructions that require 32-bit encoding.
(is_opcode_valid_16): Pass enabled ASE bitmask on to
`opcode_is_member'.
(validate_mips_insn): Explicitly handle immediates with MIPS16
instructions that require 32-bit encoding.
(operand_reg_mask) <OP_REG28>: Add handler.
(match_reg28_operand): New function.
(match_operand) <OP_REG28>: Add handler.
(append_insn): Pass ASE_MIPS16E2 setting to RELAX_MIPS16_ENCODE.
(match_mips16_insn): Handle MIPS16 instructions that require
32-bit encoding and `V' and `u' operand codes.
(mips16_ip): Allow any characters except from `.' in opcodes.
(mips16_immed_extend): Handle 9-bit immediates. Do not shuffle
immediates whose width is not one of these listed.
(md_estimate_size_before_relax): Handle MIPS16e2 relaxation.
(mips_relax_frag): Likewise.
(md_convert_frag): Likewise.
(mips_convert_ase_flags): Handle MIPS16e2 ASE.
* doc/as.texinfo (Target MIPS options): Add `-mmips16e2' and
`-mno-mips16e2' options.
(-mmips16e2, -mno-mips16e2): New options.
* doc/c-mips.texi (MIPS Options): Add `-mmips16e2' and
`-mno-mips16e2' options.
(MIPS ASE Instruction Generation Overrides): Add `.set mips16e2'
and `.set nomips16e2'.
Maciej W. Rozycki [Mon, 15 May 2017 12:21:01 +0000 (13:21 +0100)]
MIPS16/GAS: Improve [32768,65535] out-of-range operand error diagnostics
Improve out-of-range operand error diagnostics for invalid values in the
[32768,65535] range used for a signed 16-bit immediate, making the
message consistent with that used for other invalid values, e.g.:
foo.s:1: Error: operand 2 must be an immediate expression `addiu $2,$gp,32768'
foo.s:2: Error: invalid operands `lw $2,32768($gp)'
vs:
foo.s:3: Error: operand 3 out of range `addiu $2,$gp,-32769'
foo.s:4: Error: operand 2 out of range `lw $2,-32769($gp)'
This case does not currently trigger however, for two reasons.
First, for regular MIPS and microMIPS assembly in the case of no match
caused by `match_int_operand' here, the function is always called again
from `mips_ip' via `match_insns', `match_insn' and then `match_operand'
for the same opcode table's entry with `lax_match' set to TRUE, in which
case the attempt to match succeeds and no error is issued.
Second, in the case of MIPS16 assembly no call to `match_int_operand' is
made at all for signed 16-bit immediates, because such immediates are
currently only matched with extensible instructions, and these are
handled in `match_mips16_insn' via `match_expression' directly rather
than via `match_operand'.
This will change for MIPS16 code with MIPS16e2 support introduced, where
non-extensible instructions accepting signed 16-bit immediates will be
added, so make the case work well right from the start:
foo.s:1: Error: operand 3 out of range `addiu $2,$gp,32768'
foo.s:2: Error: operand 2 out of range `lw $2,32768($gp)'
gas/
* config/tc-mips.c (match_int_operand): Call
`match_out_of_range' before returning failure for 0x8000-0xffff
values conditionally allowed.
Maciej W. Rozycki [Mon, 15 May 2017 12:19:20 +0000 (13:19 +0100)]
MIPS16/GAS: Improve non-constant operand error diagnostics
Improve operand error diagnostics for non-constant expressions used for
a 16-bit immediate, making the message more descriptive and indicating
the offending operand, e.g.:
foo.s:1: Error: invalid operands `lui $2,foo-bar'
will show as:
foo.s:1: Error: operand 2 must be constant `lui $2,foo-bar'
This case does not currently trigger however, for two reasons.
First, for regular MIPS and microMIPS assembly in the case of no match
caused by `match_int_operand' here, the function is always called again
from `mips_ip' via `match_insns', `match_insn' and then `match_operand'
for the same opcode table's entry with `lax_match' set to TRUE, in which
case the attempt to match succeeds and no error is issued.
Second, in the case of MIPS16 assembly no call to `match_int_operand' is
made at all for 16-bit immediates, because such immediates are currently
only matched with extensible instructions, and these are handled in
`match_mips16_insn' via `match_expression' directly rather than via
`match_operand'.
This will change for MIPS16 code with MIPS16e2 support introduced, where
non-extensible instructions accepting 16-bit immediates will be added,
so make the case work well right from the start.
gas/
* config/tc-mips.c (match_int_operand): Call
`match_not_constant' before returning failure for a non-constant
16-bit immediate conditionally allowed.
Maciej W. Rozycki [Mon, 15 May 2017 12:17:18 +0000 (13:17 +0100)]
MIPS/GAS: Improve bignum operand error diagnostics
Improve bignum operand error diagnostics for cases where a constant
would be accepted and report them as range errors, also indicating the
offending operand and instruction, e.g.:
$ cat bignum.s
addiu $2, 0x10000000000000000
break 0x10000000000000000
$ as -o bignum.o bignum.s
bignum.s:1: Error: bignum invalid
bignum.s:2: Error: operand 1 must be constant `break 0x10000000000000000'
$
now show as:
$ as -o bignum.o bignum.s
bignum.s:1: Error: operand 2 out of range `addiu $2,0x10000000000000000'
bignum.s:2: Error: operand 1 out of range `break 0x10000000000000000'
$
gas/
* config/tc-mips.c (match_const_int): Call `match_out_of_range'
rather than `match_not_constant' for unrelocated operands
retrieved as an `O_big' expression.
(match_int_operand): Call `match_out_of_range' for relocatable
operands retrieved as an `O_big' expression.
(match_mips16_insn): Call `match_out_of_range' for relaxable
operands retrieved as an `O_big' expression.
* testsuite/gas/mips/addiu-error.d: New test.
* testsuite/gas/mips/mips16@addiu-error.d: New test.
* testsuite/gas/mips/micromips@addiu-error.d: New test.
* testsuite/gas/mips/break-error.d: New test.
* testsuite/gas/mips/lui-1.l: Adjust error message.
* testsuite/gas/mips/addiu-error.l: New stderr output.
* testsuite/gas/mips/mips16@addiu-error.l: New stderr output.
* testsuite/gas/mips/micromips@addiu-error.l: New stderr output.
* testsuite/gas/mips/break-error.l: New stderr output.
* testsuite/gas/mips/addiu-error.s: New test source.
* testsuite/gas/mips/break-error.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
Maciej W. Rozycki [Mon, 15 May 2017 12:13:41 +0000 (13:13 +0100)]
MIPS16/GAS: Improve non-immediate operand error diagnostics
Improve non-immediate operand error diagnostics for extensible MIPS16
instructions and make it match corresponding regular MIPS and microMIPS
handling, e.g:
$ cat addiu.s
addiu $4, $3, $2
$ as -o addiu.o addiu.s
addiu.s: Assembler messages:
addiu.s:1: Error: operand 3 must be an immediate expression `addiu $4,$3,$2'
$ as -mips16 -o addiu.o addiu.s
addiu.s: Assembler messages:
addiu.s:1: Error: invalid operands `addiu $4,$3,$2'
$
To do so observe that for extensible MIPS16 instructions and a non-PC
relative operand this case is handled by an explicit OT_INTEGER check in
`match_mips16_insn' returning a failure right away and consequently
preventing a call to `match_expression' from being made. As from commit
d436c1c2e889 ("Improve error reporting for register expressions"),
<https://sourceware.org/ml/binutils/2013-08/msg00134.html>, however the
check has become redundant as `match_expression' now only ever returns
success for OT_INTEGER argument tokens, and a special case of an OT_CHAR
`(' token already handled by `match_mips16_insn' just ahead of the
`match_expression' call. Previously it also returned success for OT_REG
argument tokens.
Let the call to `match_expression' always happen then, yielding the same
failure for the affected cases, however with more accurate diagnostics
provided by the call making reporting consistent:
$ as -mips16 -o addiu.o addiu.s
addiu.s: Assembler messages:
addiu.s:1: Error: operand 3 must be an immediate expression `addiu $4,$3,$2'
$
gas/
* config/tc-mips.c (match_mips16_insn): Remove the explicit
OT_INTEGER check before the `match_expression' call.
* testsuite/gas/mips/mips16-insn-e.l: Adjust messages.
* testsuite/gas/mips/mips16-32@mips16-insn-e.l: Likewise.
* testsuite/gas/mips/mips16-64@mips16-insn-e.l: Likewise.
* testsuite/gas/mips/mips16e-32@mips16-insn-e.l: Likewise.
* testsuite/gas/mips/mips16-reg-error.d: New test.
* testsuite/gas/mips/mips16-reg-error.l: New stderr output.
* testsuite/gas/mips/mips16-reg-error.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new test.
Maciej W. Rozycki [Mon, 15 May 2017 12:09:37 +0000 (13:09 +0100)]
MIPS16/GAS: Improve disallowed relocation operand error diagnostics
Improve disallowed relocation operand error diagnostics for MIPS16 code
and make it match corresponding regular MIPS and microMIPS handling,
e.g:
$ cat sltu.s
sltu $2, %lo(foo)
$ as -o sltu.o sltu.s
sltu.s: Assembler messages:
sltu.s:1: Error: operand 2 must be constant `sltu $2,%lo(foo)'
$ as -mips16 -o sltu.o sltu.s
sltu.s: Assembler messages:
sltu.s:1: Error: invalid operands `sltu $2,%lo(foo)'
$
To do so call `match_not_constant' from `match_mips16_insn' whenever a
disallowed relocation operation has been noticed, like `match_const_int'
does, making reporting consistent:
$ as -mips16 -o sltu.o sltu.s
sltu.s: Assembler messages:
sltu.s:1: Error: operand 2 must be constant `sltu $2,%lo(foo)'
$
gas/
* config/tc-mips.c (match_mips16_insn): Call
`match_not_constant' for a disallowed relocation operation.
* testsuite/gas/mips/mips16-reloc-error.d: New test.
* testsuite/gas/mips/mips16-reloc-error.l: New stderr output.
* testsuite/gas/mips/mips16-reloc-error.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new test.
Maciej W. Rozycki [Mon, 15 May 2017 12:06:54 +0000 (13:06 +0100)]
MIPS/GAS/testsuite: Convert LUI list tests to dump tests
gas/
* testsuite/gas/mips/lui-1.d: New test.
* testsuite/gas/mips/lui-2.d: New test.
* gas/testsuite/gas/mips/mips.exp: Fold corresponding list tests
into the new tests.
Maciej W. Rozycki [Mon, 15 May 2017 12:04:19 +0000 (13:04 +0100)]
MIPS/opcodes: Remove an incorrect MT ASE reference in MFC0/MTC0 decoding
The `sel' operand of CP0 move instructions is a part of the base ISA and
has nothing to do with the MT ASE.
opcodes/
* mips-dis.c (print_insn_args) <default>: Remove an MT ASE
reference in CP0 move operand decoding.
Maciej W. Rozycki [Mon, 15 May 2017 12:02:16 +0000 (13:02 +0100)]
MIPS/GAS: Update `match_const_int' description
Remove a stale reference to FALLBACK parameter from the description of
`match_const_int', matching commit
1a00e61226b3 ("Remove soft_match"),
<https://sourceware.org/ml/binutils/2013-08/msg00133.html>.
gas/
* config/tc-mips.c (match_const_int): Update description.
Maciej W. Rozycki [Mon, 15 May 2017 11:47:26 +0000 (12:47 +0100)]
MIPS/GAS/doc: Refer to `.module' rather than `.set'
Complement commit
919731affbef ("Add MIPS .module directive") and update
the GAS manual to refer to the `.module' rather than `.set' directive in
command-line option descriptions, following an observation that unlike
`.set' and like the respective command-line option the use of the
`.module' directive affects the ISA and ASE flags recorded in the object
file produced, and therefore it is `.module' rather than `.set' that
corresponds to the respective command-line option.
gas/
* doc/as.texinfo (-mips16, -no-mips16): Refer to `.module
mips16' rather than `.set mips16'.
(-mmicromips, -mno-micromips): Refer to `.module micromips' and
`.module nomicromips' rather than `.set micromips' and `.set
nomicromips'.
(-msmartmips, -mno-smartmips): Refer to `.module smartmips'
rather than `.set smartmips'.
* doc/c-mips.texi (MIPS Options): Refer to `.module mips16',
`.module micromips', `.module nomicromips' and `.module
smartmips' rather than `.set mips16', `.set micromips', `.set
nomicromips' and `.set smartmips' respectively.
Rainer Orth [Mon, 15 May 2017 12:43:15 +0000 (14:43 +0200)]
Fix gdb procfs.c compilation on Solaris
Prompted by the creation of the gdb 8.0 branch, I tried to build it on
x86_64-pc-solaris2.12, but failed:
/vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/procfs.c: In function `target_ops* procfs_target()':
/vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/procfs.c:186:27: error: invalid conversion from `void (*)(target_ops*, char*, char*, char**, int)' to `void (*)(target_ops*, const char*, const string&, char**, int) {aka void (*)(target_ops*, const char*, const std::__cxx11::basic_string<char>&, char**, int)}' [-fpermissive]
t->to_create_inferior = procfs_create_inferior;
^~~~~~~~~~~~~~~~~~~~~~
/vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/procfs.c: At global scope:
/vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/procfs.c:125:13: warning: `void procfs_create_inferior(target_ops*, char*, char*, char**, int)' declared `static' but never defined [-Wunused-function]
static void procfs_create_inferior (struct target_ops *, char *,
^~~~~~~~~~~~~~~~~~~~~~
/vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/procfs.c:4529:1: warning: `void procfs_create_inferior(target_ops*, const char*, const string&, char**, int)' defined but not used [-Wunused-function]
procfs_create_inferior (struct target_ops *ops, const char *exec_file,
^~~~~~~~~~~~~~~~~~~~~~
This can easily be fixed by the following patch.
* procfs.c (procfs_create_inferior): Change prototype to match
definition.
Nick Clifton [Mon, 15 May 2017 12:12:49 +0000 (13:12 +0100)]
Add .debug_gdb_scripts section to PE linker scripts.
PR ld/21459
* scripttempl/pe.sc: Add .debug_gdb_scripts section.
* scripttempl/pep.sc: Likewise.
GDB Administrator [Mon, 15 May 2017 00:00:38 +0000 (00:00 +0000)]
Automatic date update in version.in
John David Anglin [Sun, 14 May 2017 20:06:06 +0000 (16:06 -0400)]
Fix match and mask for 64-bit bb opcode.
GDB Administrator [Sun, 14 May 2017 00:00:28 +0000 (00:00 +0000)]
Automatic date update in version.in
James Clarke [Sat, 13 May 2017 15:01:15 +0000 (08:01 -0700)]
Fix assertion failure relaxing TLS for position-independent executables.
gold/
PR gold/21444
* gold.cc (Target_sparc::Relocate::relocate_tls): Local
variables are final for position-independent executables. This
has to be consistent with Target_sparc::Scan::local otherwise
they will disagree as to whether local-exec is used.
Eli Zaretskii [Sat, 13 May 2017 08:10:00 +0000 (11:10 +0300)]
Avoid compiler warning in MinGW build
gdb:
2017-05-13 Eli Zaretskii <eliz@gnu.org>
* tui/tui.c (tui_enable): Cast "unknown" to 'char *' to avoid a
C++ compiler warning.
GDB Administrator [Sat, 13 May 2017 00:00:51 +0000 (00:00 +0000)]
Automatic date update in version.in
Igor Kudrin [Fri, 12 May 2017 22:24:32 +0000 (15:24 -0700)]
Fix misplacement of a relaxed section on AArch64.
gold/ChangeLog
PR gold/21430
* aarch64.cc
(AArch64_relobj::convert_input_section_to_relaxed_section):
Set the section offset to -1ULL.
(Target_aarch64::relocate_section): Adjust the view in case
of a relaxed input section.
* testsuite/Makefile.am (pr21430): New test.
* testsuite/Makefile.in: Regenerate
* testsuite/pr21430.s: New test source file.
* testsuite/pr21430.sh: New test script.
H.J. Lu [Fri, 12 May 2017 15:07:21 +0000 (08:07 -0700)]
x86: Merge X86_ISA_1_USED/X86_ISA_1_NEEDED properties
If there are more than GNU property note in an input, we should merge
X86_ISA_1_USED and X86_ISA_1_NEEDED properties.
bfd/
* elf32-i386.c (elf_i386_parse_gnu_properties): Merge
GNU_PROPERTY_X86_ISA_1_USED and GNU_PROPERTY_X86_ISA_1_NEEDED
properties.
* elf64-x86-64.c (elf_x86_64_parse_gnu_properties): Likewise.
ld/
* testsuite/ld-i386/i386.exp: Run property-x86-3.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/property-x86-3.d: New file.
* testsuite/ld-i386/property-x86-3.s: Likewise.
* testsuite/ld-x86-64/property-x86-3.d: Likewise.
* testsuite/ld-x86-64/property-x86-3.s: Likewise.
Tom Tromey [Fri, 12 May 2017 04:22:36 +0000 (22:22 -0600)]
Avoid exponential behavior in rust_evaluate_subexp
The STRUCTOP_STRUCT case in rust_evaluate_subexp would evaluate its
LHS, and then, if it did not need Rust-specific treatment, it would
back up and re-evaluate the entire STRUCTOP_STRUCT part of the
expression using evaluate_subexp_standard. This yields exponential
behavior and causes some expressions to evaluate extremely slowly.
The fix is to simply do the needed work inline.
This is PR rust/21483.
ChangeLog
2017-05-12 Tom Tromey <tom@tromey.com>
PR rust/21483:
* rust-lang.c (rust_evaluate_subexp) <STRUCTOP_STRUCT>: Don't
recurse, just call value_struct_elt directly.
Tom Tromey [Fri, 12 May 2017 01:50:47 +0000 (19:50 -0600)]
Fix rust_dump_subexp_body
rust_dump_subexp_body was not correct in a couple of cases. While
debugging the bug I was really interested in, this caused a crash.
This patch fixes the problems. No test case because, IIRC there
generally aren't tests for expression dumping.
ChangeLog
2017-05-12 Tom Tromey <tom@tromey.com>
* rust-lang.c (rust_dump_subexp_body) <STRUCTOP_ANONYMOUS,
OP_RUST_ARRAY>: Fix.
Tom Tromey [Fri, 12 May 2017 01:44:43 +0000 (19:44 -0600)]
Replace "return" with "break"
This replaces a "return" with a "break" in rust_print_subexp, for
consistency.
ChangeLog
2017-05-12 Tom Tromey <tom@tromey.com>
* rust-lang.c (rust_print_subexp): Replace "return" with "break".
Maciej W. Rozycki [Fri, 12 May 2017 01:28:54 +0000 (02:28 +0100)]
MIPS/GAS: Unify GP-relative percent-ops
For a reason that is unclear commit
d6f165938798 ("Support for MIPS16
HI16/LO16 relocations"),
<https://sourceware.org/ml/binutils/2005-02/msg00332.html>, which has
added support for the R_MIPS16_GPREL relocation, has spelled its
corresponding MIPS16 percent-op as `%gprel', rather than `%gp_rel' which
is how its regular MIPS counterpart is spelled. To make assembly code
sharing easier between the regular MIPS and the MIPS16 ISA make both
percent-op spellings acceptable in both kinds of code now.
Parts of this change by Matthew Fortune.
gas/
* config/tc-mips.c (mips_percent_op): Add "%gprel".
(mips16_percent_op): Add "%gp_rel".
* testsuite/gas/mips/elf-rel8.s:: Add `%gprel' forms.
* testsuite/gas/mips/elf-rel8-mips16.s: Add `%gp_rel' forms.
* testsuite/gas/mips/elf-rel8.d: Adjust accordingly.
* testsuite/gas/mips/elf-rel8-mips16.d: Likewise.
Maciej W. Rozycki [Fri, 12 May 2017 00:09:36 +0000 (01:09 +0100)]
MIPS16/opcodes: Make the handling of BREAK and SDBBP consistent
Disassemble the MIPS16 BREAK and SDBBP instruction's immediate operand
in the hexadecimal rather than decimal numeral system and add respective
operandless variants with an implicit 0 operand, making our handling of
these instructions consistent with how we have processed their regular
MIPS and microMIPS counterparts since forever.
opcodes/
* mips16-opc.c (decode_mips16_operand) <'6'>: Switch the operand
type to hexadecimal.
(mips16_opcodes): Add operandless "break" and "sdbbp" entries.
binutils/
* testsuite/binutils-all/mips/mips16-extend-insn.d: Adjust BREAK
and SDBBP disassembly.
gas/
* testsuite/gas/mips/mips16.d: Adjust BREAK disassembly.
* testsuite/gas/mips/mips16-64@mips16.d: Likewise.
* testsuite/gas/mips/mips16-64.d: Likewise.
* testsuite/gas/mips/mips16-64@mips16-64.d: Likewise.
* testsuite/gas/mips/mips16-macro.d: Likewise.
* testsuite/gas/mips/mips16-64@mips16-macro.d: Likewise.
* testsuite/gas/mips/mips16-sub.d: Likewise.
* testsuite/gas/mips/mips16-32@mips16-sub.d: Likewise.
GDB Administrator [Fri, 12 May 2017 00:00:43 +0000 (00:00 +0000)]
Automatic date update in version.in
Maciej W. Rozycki [Thu, 11 May 2017 23:46:45 +0000 (00:46 +0100)]
MIPS/opcodes: Mark descriptive SYNC mnemonics as aliases
Following the way how descriptive SYNC mnemonics have been defined in
the architecture[1][2] mark them as aliases, so that the generic SYNC
instruction can be alternatively disassembled along with its immediate
operand, as noted in the documents referred.
References:
[1] "MIPS Architecture For Programmers, Volume II-A: The MIPS32
Instruction Set", MIPS Technologies, Inc., Document Number: MD00086,
Revision 5.04, December 11, 2013, Table 4.7 "Encodings of the
Bits[10:6] of the SYNC instruction; the SType Field", p. 305
[2] "MIPS Architecture for Programmers, Volume II-B: The microMIPS32
Instruction Set", MIPS Technologies, Inc., Document Number: MD00582,
Revision 5.04, January 15, 2014, Table 5.28 "Encodings of the
Bits[10:6] of the SYNC instruction; the SType Field", p. 481
opcodes/
* mips-opc.c (mips_builtin_opcodes): Mark "synciobdma", "syncs",
"syncw", "syncws", "sync_acquire", "sync_mb", "sync_release",
"sync_rmb" and "sync_wmb" as aliases.
* micromips-opc.c (micromips_opcodes): Mark "sync_acquire",
"sync_mb", "sync_release", "sync_rmb" and "sync_wmb" as aliases.
gas/
* testsuite/gas/mips/mips32r2-sync-1.d: New test.
* testsuite/gas/mips/micromips@mips32r2-sync-1.d: New test.
* testsuite/gas/mips/mips.exp: Run the new tests.
H.J. Lu [Thu, 11 May 2017 18:26:26 +0000 (11:26 -0700)]
x86-64: Rename .plt.bnd to .plt.sec
Rename .plt.bnd to .plt.sec to indicate that this is used as the second
PLT section. There is no change in run-time behavior. We also scan the
.plt.sec section to synthesize PLT symbols.
bfd/
* elf64-x86-64.c (elf_x86_64_link_hash_entry): Rename plt_bnd
to plt_second.
(elf_x86_64_link_hash_table): Rename plt_bnd/plt_bnd_eh_frame
to plt_second/plt_second_eh_frame.
(elf_x86_64_link_hash_newfunc): Updated.
(elf_x86_64_allocate_dynrelocs): Likewise.
(elf_x86_64_size_dynamic_sections): Likewise.
(elf_x86_64_relocate_section): Likewise.
(elf_x86_64_finish_dynamic_symbol): Likewise.
(elf_x86_64_finish_dynamic_sections): Likewise.
(elf_x86_64_plt_type): Rename plt_bnd to plt_second.
(elf_x86_64_get_synthetic_symtab): Updated. Also scan the
.plt.sec section.
(elf_backend_setup_gnu_properties): Updated. Create the
.plt.sec section instead of the .plt.sec section.
ld/
* emulparams/elf_x86_64.sh (TINY_READONLY_SECTION): Replace
.plt.bnd with .plt.sec.
* testsuite/ld-x86-64/bnd-ifunc-1-now.d: Likewise.
* testsuite/ld-x86-64/bnd-ifunc-2-now.d: Likewise.
* testsuite/ld-x86-64/bnd-ifunc-2.d: Likewise.
* testsuite/ld-x86-64/bnd-plt-1-now.d: Likewise.
* testsuite/ld-x86-64/bnd-plt-1.d: Likewise.
* testsuite/ld-x86-64/mpx3.dd: Likewise.
* testsuite/ld-x86-64/mpx3n.dd: Likewise.
* testsuite/ld-x86-64/mpx4.dd: Likewise.
* testsuite/ld-x86-64/mpx4n.dd: Likewise.
* testsuite/ld-x86-64/plt-main-bnd-now.rd: Likewise.
* testsuite/ld-x86-64/pr21038b-now.d: Likewise.
* testsuite/ld-x86-64/pr21038b.d: Likewise.
* testsuite/ld-x86-64/pr21038c-now.d: Likewise.
* testsuite/ld-x86-64/pr21038c.d: Likewise.
H.J. Lu [Thu, 11 May 2017 14:42:30 +0000 (07:42 -0700)]
x86: Generate PLT relocations for -z now
This patch partially reverses:
commit
25070364b0ce33eed46aa5d78ebebbec6accec7e
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Sat May 16 07:00:21 2015 -0700
Don't generate PLT relocations for now binding
to support LD_AUDIT and LD_PROFILE with -z now. If there is an existing
GOT relocation, it is still used to avoid PLT relocation against the same
function symbol.
bfd/
* elf32-i386.c (elf_i386_allocate_dynrelocs): Partially revert
commit
25070364b0ce33eed46aa5d78ebebbec6accec7e.
* elf64-x86-64.c (elf_x86_64_allocate_dynrelocs): Likewse.
ld/
* testsuite/ld-i386/plt-pic2.dd: Updated.
* testsuite/ld-i386/plt2.dd: Likewise.
* testsuite/ld-i386/plt2.rd: Likewise.
* testsuite/ld-i386/pr17689now.rd: Likewise.
* testsuite/ld-ifunc/ifunc-16-i386-now.d: Likewise.
* testsuite/ld-ifunc/ifunc-16-x86-64-now.d: Likewise.
* testsuite/ld-ifunc/pr17154-i386-now.d: Likewise.
* testsuite/ld-ifunc/pr17154-x86-64-now.d: Likewise.
* testsuite/ld-x86-64/bnd-branch-1-now.d: Likewise.
* testsuite/ld-x86-64/bnd-ifunc-2-now.d: Likewise.
* testsuite/ld-x86-64/bnd-plt-1-now.d: Likewise.
* testsuite/ld-x86-64/plt2.dd: Likewise.
* testsuite/ld-x86-64/plt2.rd: Likewise.
* testsuite/ld-x86-64/pr17689now.rd: Likewise.
* testsuite/ld-x86-64/pr21038b-now.d: Likewise.
* testsuite/ld-x86-64/pr21038c-now.d: Likewise.
GDB Administrator [Thu, 11 May 2017 00:00:48 +0000 (00:00 +0000)]
Automatic date update in version.in
Maciej W. Rozycki [Wed, 10 May 2017 19:14:11 +0000 (20:14 +0100)]
MIPS/GAS/testsuite: Convert ISA override list tests to dump tests
And remove the zillion duplicate sources. Also `mips1@isa-override-2.l'
is the same as `r3000@isa-override-2.l', so remove the latter too, now
that `r3000@isa-override-2.d' can name a file to match stderr output
against.
gas/
* testsuite/gas/mips/isa-override-2.d: New test.
* testsuite/gas/mips/mips1@isa-override-2.d: New test.
* testsuite/gas/mips/r3000@isa-override-2.d: New test.
* testsuite/gas/mips/r3900@isa-override-2.d: New test.
* testsuite/gas/mips/mips2@isa-override-2.d: New test.
* testsuite/gas/mips/mips32@isa-override-2.d: New test.
* testsuite/gas/mips/mips32r2@isa-override-2.d: New test.
* testsuite/gas/mips/mips32r3@isa-override-2.d: New test.
* testsuite/gas/mips/mips32r5@isa-override-2.d: New test.
* testsuite/gas/mips/mips32r6@isa-override-2.d: New test.
* testsuite/gas/mips/octeon3@isa-override-2.d: New test.
* testsuite/gas/mips/r3000@isa-override-2.l: Remove list test.
* testsuite/gas/mips/mips1@isa-override-2.s: Remove test source.
* testsuite/gas/mips/r3000@isa-override-2.s: Remove test source.
* testsuite/gas/mips/r3900@isa-override-2.s: Remove test source.
* testsuite/gas/mips/mips2@isa-override-2.s: Remove test source.
* testsuite/gas/mips/mips32@isa-override-2.s: Remove test
source.
* testsuite/gas/mips/mips32r2@isa-override-2.s: Remove test
source.
* testsuite/gas/mips/mips32r3@isa-override-2.s: Remove test
source.
* testsuite/gas/mips/mips32r5@isa-override-2.s: Remove test
source.
* testsuite/gas/mips/mips32r6@isa-override-2.s: Remove test
source.
* testsuite/gas/mips/octeon3@isa-override-2.s: Remove test
source.
* gas/testsuite/gas/mips/mips.exp: Fold corresponding list tests
into the new tests.
Maciej W. Rozycki [Wed, 10 May 2017 18:03:15 +0000 (19:03 +0100)]
MIPS/binutils/testsuite: Define names of temporary files
Define `tempfile' and `copyfile' in `mips.exp' so that standalone script
execution via `RUNTESTFLAGS=mips.exp' works rather than producing:
Running .../binutils/testsuite/binutils-all/mips/mips.exp ...
ERROR: tcl error sourcing
.../binutils/testsuite/binutils-all/mips/mips.exp.
ERROR: can't read "tempfile": no such variable
while executing
"binutils_assemble_flags ${srcfile} $tempfile $opts(as)"
(procedure "run_dump_test" line 207)
invoked from within
"run_dump_test "mips-ase-1""
invoked from within
"if [is_elf_format] {
run_dump_test "mips-ase-1"
run_dump_test "mips-ase-2"
run_dump_test "mips-ase-3"
run_dump_test "mixed-mips16"
..."
(file ".../binutils/testsuite/binutils-all/mips/mips.exp" line 22)
invoked from within
"source .../binutils/testsuite/binutils-all/mips/mips.exp"
("uplevel" body line 1)
invoked from within
"uplevel #0 source .../binutils/testsuite/binutils-all/mips/mips.exp"
invoked from within
"catch "uplevel #0 source $test_file_name""
testcase .../binutils/testsuite/binutils-all/mips/mips.exp completed in 0 seconds
binutils/
* testsuite/binutils-all/mips/mips.exp: Define `tempfile' and
`copyfile' variables.
H.J. Lu [Wed, 10 May 2017 17:51:35 +0000 (10:51 -0700)]
i386: Set CHECK_RELOCS_AFTER_OPEN_INPUT to yes
All linker targets based on elf32-i386 should check relocations after
opening all inputs since this is how elf32-i386 works.
* emulparams/i386lynx.sh (CHECK_RELOCS_AFTER_OPEN_INPUT): Set
to yes.
* emulparams/i386moss.sh (CHECK_RELOCS_AFTER_OPEN_INPUT):
Likewise.
* emulparams/i386nw.sh (CHECK_RELOCS_AFTER_OPEN_INPUT): Likewise.
Maciej W. Rozycki [Wed, 10 May 2017 17:19:56 +0000 (18:19 +0100)]
MIPS/GAS/testsuite: Correct swapped MIPS16e subset test names
Correct the test names swapped between common and 64-bit MIPS16e subset
tests.
gas/
* testsuite/gas/mips/mips16e-sub.d: Correct test name.
* testsuite/gas/mips/mips16-32@mips16e-sub.d: Likewise.
* testsuite/gas/mips/mips16-64@mips16e-sub.d: Likewise.
* testsuite/gas/mips/mips16e-64-sub.d: Likewise.
* testsuite/gas/mips/mips16-32@mips16e-64-sub.d: Likewise.
* testsuite/gas/mips/mips16-64@mips16e-64-sub.d: Likewise.
* testsuite/gas/mips/mips16e-32@mips16e-64-sub.d: Likewise.
Jose E. Marchesi [Wed, 10 May 2017 16:44:19 +0000 (18:44 +0200)]
bfd: fix the deletion of relocs in sparc64
This patch fixes the deletion of relocations in BFD sections in
sparc64 targets.
A specialized `_bfd_set_reloc' function is provided that updates the
internal canon_reloc_count(sec) counter instead of sec->reloc_count.
Additionally, the `write_relocs' callback in elf64-sparc is adapted to
use the canon_reloc_count to traverse `sec->orelocation'.
Tested in sparc64-linux-gnu targets.
Fixes an existing failure in the merge-notes objcopy test.
No regressions.
bfd/ChangeLog:
2017-05-10 Jose E. Marchesi <jose.marchesi@oracle.com>
* elf64-sparc.c (elf64_sparc_set_reloc): New function.
(bfd_elf64_set_reloc): Define.
(elf64_sparc_write_relocs): Use `canon_reloc_count'.
Jose E. Marchesi [Wed, 10 May 2017 16:40:04 +0000 (18:40 +0200)]
bfd: new BFD target entry point _bfd_set_reloc.
This patch adds a new entry point to the BFD_JUMP_TABLE_RELOCS. The
previous common implementation `bfd_set_reloc', in bfd/bfd.c, has been
moved to bfd/reloc.c with the name `_bfd_generic_set_reloc', and all
BFD targets has been adapted to use it.
This patch doesn't introduce any change on functionality, but prepares
the ground for further work.
bfd/ChangeLog:
2017-05-10 Jose E. Marchesi <jose.marchesi@oracle.com>
* targets.c (BFD_JUMP_TABLE_RELOCS): Add NAME##_set_reloc.
(struct bfd_target): New field _bfd_set_reloc.
* bfd.c (bfd_set_reloc): Call backend _set_bfd.
* reloc.c (_bfd_generic_set_reloc): New function.
* coffcode.h (coff_set_reloc): Define to _bfd_generic_set_reloc.
* nlm-target.h (nlm_set_reloc): Likewise.
* coff-rs6000.c (_bfd_xcoff_set_reloc): Likewise.
* aout-tic30.c (MY_set_reloc): Likewise.
* aout-target.h (MY_set_reloc): Likewise.
* elfxx-target.h (bfd_elfNN_set_reloc): Likewise.
* coff-alpha.c (_bfd_ecoff_set_reloc): Likewise.
* mach-o-target.c (bfd_mach_o_set_reloc): Likewise.
* vms-alpha.c (alpha_vms_set_reloc): Likewise.
* aout-adobe.c (aout_32_set_reloc): Likewise.
* bout.c (b_out_set_reloc): Likewise.
* coff-mips.c (_bfd_ecoff_set_reloc): Likewise.
* i386os9k.c (aout_32_set_reloc): Likewise.
* ieee.c (ieee_set_reloc): Likewise.
* oasys.c (oasys_set_reloc): Likewise.
* som.c (som_set_reloc): Likewise.
* versados.c (versados_set_reloc): Likewise.
* coff64-rs6000.c (rs6000_xcoff64_vec): Add
_bfd_generic_set_reloc.
(rs6000_xcoff64_aix_vec): LIkewise.
* libbfd.c (_bfd_norelocs_set_reloc): New function.
* libbfd-in.h: Prototype for _bfd_norelocs_set_reloc.
* i386msdos.c (msdos_set_reloc): Define to
_bfd_norelocs_set_reloc.
* elfcode.h (elf_set_reloc): Define.
* bfd-in2.h: Regenerated.
H.J. Lu [Wed, 10 May 2017 16:28:00 +0000 (09:28 -0700)]
x86-64: Use .plt.bnd for IFUNC function address
When -z bndplt is used, we must use the .plt.bnd entry for IFUNC function
address.
bfd/
PR ld/21481
* elf64-x86-64.c (elf_x86_64_finish_dynamic_symbol): Use .plt.bnd
for IFUNC function address.
ld/
PR ld/21481
* testsuite/ld-x86-64/pr21481a.c: New file.
* testsuite/ld-x86-64/pr21481b.S: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run PR ld/21481 tests.
Maciej W. Rozycki [Wed, 10 May 2017 13:37:21 +0000 (14:37 +0100)]
MIPS/GAS/testsuite: Remove stale `mips16-macro' list test output
Complement commit
c60aaac10f9a1 ("MIPS/GAS/testsuite: Extend MIPS16
testing over multiple ISAs") and remove a stale `mips16-macro' list test
output replaced with the `mips16-32@mips16-macro' stderr output.
gas/
* testsuite/gas/mips/mips16-macro.l: Remove list test.
Maciej W. Rozycki [Wed, 10 May 2017 13:17:19 +0000 (14:17 +0100)]
MIPS/GAS/testsuite: Remove last remnants of ECOFF support
Complement commit
16e5e222b6ea ("Make gas/mips/mips.exp ELF-only"),
<https://sourceware.org/ml/binutils/2013-06/msg00195.html>, and commit
fcedb9f3ca87 ("MIPS/GAS/testsuite: Remove remnants of a.out/ECOFF
support"), and remove stale ECOFF test dumps previously missed.
gas/
* testsuite/gas/mips/r3900@ecoff@ld.d: Remove test.
* testsuite/gas/mips/mips2@ecoff@ld.d: Remove test.
* testsuite/gas/mips/mips32@ecoff@ld.d: Remove test.
* testsuite/gas/mips/mips32r2@ecoff@ld.d: Remove test.
* testsuite/gas/mips/r3900@ecoff@ld-forward.d: Remove test.
* testsuite/gas/mips/mips2@ecoff@ld-forward.d: Remove test.
* testsuite/gas/mips/mips32@ecoff@ld-forward.d: Remove test.
* testsuite/gas/mips/mips32r2@ecoff@ld-forward.d: Remove test.
* testsuite/gas/mips/mips1@ecoff@sd.d: Remove test.
* testsuite/gas/mips/r3000@ecoff@sd.d: Remove test.
* testsuite/gas/mips/r3900@ecoff@sd.d: Remove test.
* testsuite/gas/mips/mips2@ecoff@sd.d: Remove test.
* testsuite/gas/mips/mips32@ecoff@sd.d: Remove test.
* testsuite/gas/mips/mips32r2@ecoff@sd.d: Remove test.
* testsuite/gas/mips/mips1@ecoff@sd-forward.d: Remove test.
* testsuite/gas/mips/r3000@ecoff@sd-forward.d: Remove test.
* testsuite/gas/mips/r3900@ecoff@sd-forward.d: Remove test.
* testsuite/gas/mips/mips2@ecoff@sd-forward.d: Remove test.
* testsuite/gas/mips/mips32@ecoff@sd-forward.d: Remove test.
* testsuite/gas/mips/mips32r2@ecoff@sd-forward.d: Remove test.
Claudiu Zissulescu [Wed, 10 May 2017 12:42:22 +0000 (14:42 +0200)]
[ARC] Object attributes.
gas/
2017-05-10 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/gas/arc/attr-arc600.d: New file.
* testsuite/gas/arc/attr-arc600_mul32x16.d: Likewise.
* testsuite/gas/arc/attr-arc600_norm.d: Likewise.
* testsuite/gas/arc/attr-arc601.d: Likewise.
* testsuite/gas/arc/attr-arc601_mul32x16.d: Likewise.
* testsuite/gas/arc/attr-arc601_mul64.d: Likewise.
* testsuite/gas/arc/attr-arc601_norm.d: Likewise.
* testsuite/gas/arc/attr-arc700.d: Likewise.
* testsuite/gas/arc/attr-arcem.d: Likewise.
* testsuite/gas/arc/attr-archs.d: Likewise.
* testsuite/gas/arc/attr-autodetect-1.d: Likewise.
* testsuite/gas/arc/attr-autodetect-1.s: Likewise.
* testsuite/gas/arc/attr-cpu-a601.d: Likewise.
* testsuite/gas/arc/attr-cpu-a601.s: Likewise.
* testsuite/gas/arc/attr-cpu-a700.d: Likewise.
* testsuite/gas/arc/attr-cpu-a700.s: Likewise.
* testsuite/gas/arc/attr-cpu-em.d: Likewise.
* testsuite/gas/arc/attr-cpu-em.s: Likewise.
* testsuite/gas/arc/attr-cpu-hs.d: Likewise.
* testsuite/gas/arc/attr-cpu-hs.s: Likewise.
* testsuite/gas/arc/attr-em.d: Likewise.
* testsuite/gas/arc/attr-em4.d: Likewise.
* testsuite/gas/arc/attr-em4_dmips.d: Likewise.
* testsuite/gas/arc/attr-em4_fpuda.d: Likewise.
* testsuite/gas/arc/attr-em4_fpus.d: Likewise.
* testsuite/gas/arc/attr-hs.d: Likewise.
* testsuite/gas/arc/attr-hs34.d: Likewise.
* testsuite/gas/arc/attr-hs38.d: Likewise.
* testsuite/gas/arc/attr-hs38_linux.d: Likewise.
* testsuite/gas/arc/attr-mul64.d: Likewise.
* testsuite/gas/arc/attr-name.d: Likewise.
* testsuite/gas/arc/attr-name.s: Likewise.
* testsuite/gas/arc/attr-nps400.d: Likewise.
* testsuite/gas/arc/attr-override-mcpu.d: Likewise.
* testsuite/gas/arc/attr-override-mcpu.s
* testsuite/gas/arc/attr-quarkse_em.d: Likewise.
* testsuite/gas/arc/blank.s: Likewise.
* testsuite/gas/elf/section2.e-arc: Likewise.
* testsuite/gas/arc/cpu-pseudop-1.d: Update test.
* testsuite/gas/arc/cpu-pseudop-2.d: Likewise.
* testsuite/gas/arc/nps400-0.d: Likewise.
* testsuite/gas/elf/elf.exp: Set target_machine for ARC.
* config/tc-arc.c (opcode/arc-attrs.h): Include.
(ARC_GET_FLAG, ARC_SET_FLAG, streq): Define.
(arc_attribute): Declare new function.
(md_pseudo_table): Add arc_attribute.
(cpu_types): Rename default cpu features.
(selected_cpu): Set the default OSABI flag.
(mpy_option): New variable.
(pic_option): Likewise.
(sda_option): Likewise.
(tls_option): Likewise.
(feature_type, feature_list): Remove.
(arc_initial_eflag): Likewise.
(attributes_set_explicitly): New variable.
(arc_check_feature): Check also for the conflicting features.
(arc_select_cpu): Refactor assignment of selected_cpu.eflags.
(arc_option): Remove setting of private flags and architecture.
(check_cpu_feature): Refactor feature names.
(autodetect_attributes): New function.
(assemble_tokens): Use above function.
(md_parse_option): Refactor feature names.
(arc_attribute): New function.
(arc_set_attribute_int): Likewise.
(arc_set_attribute_string): Likewise.
(arc_stralloc): Likewise.
(arc_set_public_attributes): Likewise.
(arc_md_end): Likewise.
(arc_copy_symbol_attributes): Likewise.
(rc_convert_symbolic_attribute): Likewise.
* config/tc-arc.h (md_end): Define.
(CONVERT_SYMBOLIC_ATTRIBUTE): Likewise.
(TC_COPY_SYMBOL_ATTRIBUTES): Likewise.
* doc/c-arc.texi: Document ARC object attributes.
binutils/
2017-05-10 Claudiu Zissulescu <claziss@synopsys.com>
* readelf.c (decode_ARC_machine_flags): Recognize OSABI v4.
(get_arc_section_type_name): New function.
(get_section_type_name): Use the above function.
(display_arc_attribute): New function.
(process_arc_specific): Likewise.
(process_arch_specific): Handle ARC specific information.
* testsuite/binutils-all/strip-3.d: Consider ARC.attributes
section.
include/
2017-05-10 Claudiu Zissulescu <claziss@synopsys.com>
* elf/arc.h (SHT_ARC_ATTRIBUTES): Define.
(Tag_ARC_*): Define.
(E_ARC_OSABI_V4): Define.
(E_ARC_OSABI_CURRENT): Reassign it.
(TAG_CPU_*): Define.
* opcode/arc-attrs.h: New file.
* opcode/arc.h (insn_subclass_t): Assign enum values.
(insn_subclass_t): Update enum with QUARKSE1, QUARKSE2, and LL64.
(ARC_EA, ARC_CD, ARC_LLOCK, ARC_ATOMIC, ARC_MPY, ARC_MULT)
(ARC_NPS400, ARC_DPFP, ARC_SPFP, ARC_FPU, ARC_FPUDA, ARC_SWAP)
(ARC_NORM, ARC_BSCAN, ARC_UIX, ARC_TSTAMP, ARC_VBFDW)
(ARC_BARREL, ARC_DSPA, ARC_SHIFT, ARC_INTR, ARC_DIV, ARC_XMAC)
(ARC_CRC): Delete.
bfd/
2017-05-10 Claudiu Zissulescu <claziss@synopsys.com>
* elf32-arc.c (FEATURE_LIST_NAME): Define.
(CONFLICT_LIST): Likewise.
(opcode/arc-attrs.h): Include.
(arc_elf_print_private_bfd_data): Print OSABI v4 flag.
(arc_extract_features): New file.
(arc_stralloc): Likewise.
(arc_elf_merge_attributes): Likewise.
(arc_elf_merge_private_bfd_data): Use object attributes.
(bfd_arc_get_mach_from_attributes): New function.
(arc_elf_object_p): Use object attributes.
(arc_elf_final_write_processing): Likewise.
(elf32_arc_obj_attrs_arg_type): New function.
(elf32_arc_obj_attrs_handle_unknown): Likewise.
(elf32_arc_section_from_shdr): Likewise.
(elf_backend_obj_attrs_vendor): Define.
(elf_backend_obj_attrs_section): Likewise.
(elf_backend_obj_attrs_arg_type): Likewise.
(elf_backend_obj_attrs_section_type): Likewise.
(elf_backend_obj_attrs_handle_unknown): Likewise.
(elf_backend_section_from_shdr): Likewise.
ld/
2017-05-10 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/ld-arc/attr-merge-0.d: New file.
* testsuite/ld-arc/attr-merge-0.s: Likewise.
* testsuite/ld-arc/attr-merge-0e.s: Likewise.
* testsuite/ld-arc/attr-merge-1.d: Likewise.
* testsuite/ld-arc/attr-merge-1.s: Likewise.
* testsuite/ld-arc/attr-merge-1e.s: Likewise.
* testsuite/ld-arc/attr-merge-2.d: Likewise.
* testsuite/ld-arc/attr-merge-2.s: Likewise.
* testsuite/ld-arc/attr-merge-3.d: Likewise.
* testsuite/ld-arc/attr-merge-3.s: Likewise.
* testsuite/ld-arc/attr-merge-3e.s: Likewise.
* testsuite/ld-arc/attr-merge-4.s: Likewise.
* testsuite/ld-arc/attr-merge-5.d: Likewise.
* testsuite/ld-arc/attr-merge-5a.s: Likewise.
* testsuite/ld-arc/attr-merge-5b.s: Likewise.
* testsuite/ld-arc/attr-merge-conflict-isa.d: Likewise.
* testsuite/ld-arc/attr-merge-err-isa.d: Likewise.
* testsuite/ld-arc/attr-merge-incompatible-cpu.d: Likewise.
* testsuite/ld-arc/got-01.d: Update test.
* testsuite/ld-arc/attr-merge-err-quarkse.d: New file.
* testsuite/ld-arc/attr-quarkse.s: Likewise.
* testsuite/ld-arc/attr-quarkse2.s: Likewise.
opcodes/
2017-05-10 Claudiu Zissulescu <claziss@synopsys.com>
* arc-dis.c (parse_option): Update quarkse_em option..
* arc-ext-tbl.h (dsp_fp_flt2i, dsp_fp_i2flt): Change subclass to
QUARKSE1.
(dsp_fp_div, dsp_fp_cmp): Change subclass to QUARKSE2.
Kaz Kojima [Wed, 10 May 2017 00:15:19 +0000 (09:15 +0900)]
Remove Kaz Kojima as SH maintainer.
GDB Administrator [Wed, 10 May 2017 00:00:42 +0000 (00:00 +0000)]
Automatic date update in version.in
Awson [Tue, 9 May 2017 13:42:43 +0000 (14:42 +0100)]
Support pe-bigobj-x86-64 as an output format in 64-bit PE based linkers.
PR ld/21471
* pe-dll.c (pe_detail_list): Add entry for pe-bigobj-x86-64.
Yao Qi [Tue, 9 May 2017 11:36:53 +0000 (12:36 +0100)]
Use std::forward_list for current_regcache
gdb:
2017-05-09 Yao Qi <yao.qi@linaro.org>
* regcache.c: Include <forward_list>.
(struct regcache_list): Remove.
(current_regcache): Update.
(get_thread_arch_aspace_regcache): Update for std::forward_list.
(regcache_thread_ptid_changed): Likewise.
(registers_changed_ptid): Likewise.
(current_regcache_size): Likewise.
Yao Qi [Tue, 9 May 2017 11:36:53 +0000 (12:36 +0100)]
Add current_regcache unit test
This patch adds a unit test to current_regcache, to make sure it is
correctly updated by get_thread_arch_aspace_regcache and
registers_changed_ptid.
gdb:
2017-05-09 Yao Qi <yao.qi@linaro.org>
* regcache.c [GDB_SELF_TEST]: Include selftest.h.
(current_regcache_size): New function.
(current_regcache_test): New function.
(_initialize_regcache) [GDB_SELF_TEST]: Register the unit test.
Andrew Goedhart [Tue, 9 May 2017 11:14:48 +0000 (12:14 +0100)]
Fix resolution of R_ARM_THM_ALU_PREL_11_0 relocation against Thumb symbols.
PR ld/21458
* elf32-arm.c (elf32_arm_final_link_relocate): Set the bottom bit
of the value when resolving a R_ARM_THM_ALU_PREL_11_0 relocation
and the destination is a Thumb symbol.
Alan Modra [Tue, 9 May 2017 07:40:17 +0000 (17:10 +0930)]
ld.texinfo, use "affects" instead of "effects"
* ld.texinfo (orphan sections): Grammar fix.
GDB Administrator [Tue, 9 May 2017 00:00:40 +0000 (00:00 +0000)]
Automatic date update in version.in
H.J. Lu [Mon, 8 May 2017 20:37:50 +0000 (13:37 -0700)]
Add missing initializer to silence GCC 4.2
Silence GCC 4.2:
elf64-x86-64.c: In function ‘elf_x86_64_get_synthetic_symtab’:
elf64-x86-64.c:6490: warning: missing initializer
elf64-x86-64.c:6490: warning: (near initialization for ‘plts[3].sec’)
* elf32-i386.c (elf_i386_get_synthetic_symtab): Add missing
initializer for GCC 4.2.
* lf64-x86-64.c (elf_x86_64_get_synthetic_symtab): Likewise.
H.J. Lu [Mon, 8 May 2017 19:24:11 +0000 (12:24 -0700)]
x86-64: Improve PLT generation and synthetic PLT symbols
On x86-64, the procedure linkage table (PLT) is used to
1. Call external function.
2. Call internal IFUNC function. The best implementation is selected
for the target processor at run-time.
3. Act as the canonical function address.
4. Support LD_AUDIT to audit external function calls.
5. Support LD_PROFILE to profile external function calls.
PLT looks like:
PLT0: push GOT[1]
jmp *GOT[2]
nop
PLT1: jmp *GOT[name1_index]
push name1_reloc_index
jmp PLT0
GOT is an array of addresses. Initially the GOT entry of name1 is
filled with the address of the "push name1_reloc_index" instruction.
The function, name1, is called via "jmp *GOT[name1]" in the PLT entry.
Even when lazy binding is disabled by "-z now", the PLT0 entry may
still be used with LD_AUDIT or LD_PROFILE if PLT entry is used for
canonical function address.
When linker is invoked with "-z bndplt", a different PLT layout in .plt
is used:
PLT0: push GOT[1]
bnd jmp *GOT[2]
nop
PLT1: push name1_reloc_index
bnd jmp PLT0
nop
together with a second PLT section, .pl.bnd:
PLT1: bnd jmp *GOT[name1_index]
nop
where the GOT entry of name1 is filled with the address of the push
instruction of the corresponding entry in .plt.
1. With lazy binding, when the external function, name1, is called the
first time, dynamic linker is called via PLT0 to update GOT[name1_index]
with the actual address of name1 and transfers control to name1
afterwards.
2. PLT is also used to call a local IFUNC function, name1, run-time
loader updates GOT[name1_index] when loading the module.
This patch
1. Remove PLT layout configurations from x86-64 backend_data.
2. Add generic, lay and non-lazy PLT layout configurations to x86-64
link_hash_table. Generic PLT layout includes the PLT entry templates,
information how to update the first instruction in PLT and PLT eh_frame
informaton, which are initialized in x86-64 setup_gnu_properties, based
on "-z bndplt" and target selection. PLT section alignment is also set
to PLT entry size for non-NaCl target.
3. Remove elf_x86_64_create_dynamic_sections. create_dynamic_sections
isn't always called, but GOT relocations need GOT relocations. Instead,
create all x86-64 specific dynamic sections with alignment to their entry
size in x86-64 setup_gnu_properties, which initializes elf.dynobj, so
that x86-64 check_relocs can be simplified.
4. Rewrite elf_x86_64_get_synthetic_symtab to check PLT sections against
all dynamic relocations to support both lazy and non-lazy PLTs.
There is no change in PLT. The only externally visible change is the
improvement of synthetic PLT symbols for .plt.got.
bfd/
* elf64-x86-64.c (PLT_ENTRY_SIZE): Renamed to ...
(LAZY_PLT_ENTRY_SIZE): This.
(NON_LAZY_PLT_ENTRY_SIZE): New.
(elf_x86_64_plt0_entry): Renamed to ...
(elf_x86_64_lazy_plt0_entry): This.
(elf_x86_64_plt_entry): Renamed to ...
(elf_x86_64_lazy_plt_entry): This.
(elf_x86_64_bnd_plt0_entry): Renamed to ...
(elf_x86_64_lazy_bnd_plt0_entry): This.
(elf_x86_64_legacy_plt_entry): Removed.
(elf_x86_64_bnd_plt_entry): Renamed to ...
(elf_x86_64_lazy_bnd_plt_entry): This.
(elf_x86_64_legacy_plt2_entry): Renamed to ...
(elf_x86_64_non_lazy_plt_entry): This.
(elf_x86_64_bnd_plt2_entry): Renamed to ...
(elf_x86_64_non_lazy_bnd_plt_entry): This.
(elf_x86_64_eh_frame_plt): Renamed to ...
(elf_x86_64_eh_frame_lazy_plt): This.
(elf_x86_64_eh_frame_bnd_plt): Renamed to ...
(elf_x86_64_eh_frame_lazy_bnd_plt): This.
(elf_x86_64_eh_frame_plt_got): Renamed to ...
(elf_x86_64_eh_frame_non_lazy_plt): This.
(elf_x86_64_lazy_plt_layout): New.
(elf_x86_64_non_lazy_plt_layout): Likewise.
(elf_x86_64_plt_layout): Likewise.
(elf_x86_64_backend_data): Remove PLT layout information. Add
os for target system.
(GET_PLT_ENTRY_SIZE): Removed.
(elf_x86_64_lazy_plt): New.
(elf_x86_64_non_lazy_plt): Likewise.
(elf_x86_64_lazy_bnd_plt): Likewise.
(elf_x86_64_non_lazy_bnd_plt): Likewise.
(elf_x86-64_arch_bed): Updated.
(elf_x86_64_link_hash_table): Add plt, lazy_plt and non_lazy_plt.
(elf_x86_64_create_dynamic_sections): Removed.
(elf_x86_64_check_relocs): Don't check elf.dynobj. Don't call
_bfd_elf_create_ifunc_sections nor _bfd_elf_create_got_section.
(elf_x86-64_adjust_dynamic_symbol): Updated.
(elf_x86_64_allocate_dynrelocs): Updated. Pass 0 as PLT header
size to _bfd_elf_allocate_ifunc_dyn_relocs and don't allocate
size for PLT0 if there is no PLT0. Get plt_entry_size from
non_lazy_plt for non-lazy PLT entries.
(elf_x86_64_size_dynamic_sections): Updated. Get plt_entry_size
from non_lazy_plt for non-lazy PLT entries.
(elf_x86-64_relocate_section): Updated. Properly get PLT index
if there is no PLT0.
(elf_x86_64_finish_dynamic_symbol): Updated. Fill the first slot
in the PLT entry with generic PLT layout. Fill the non-lazy PLT
entries with non-lazy PLT layout. Don't fill the second and third
slots in the PLT entry if there is no PLT0.
(elf_x86_64_finish_dynamic_sections): Updated. Don't fill PLT0
if there is no PLT0. Set sh_entsize on the .plt.got section.
(compare_relocs): New.
(elf_x86_64_plt_type): Likewise.
(elf_x86_64_plt): Likewise.
(elf_x86_64_nacl_plt): New. Forward declaration.
(elf_x86_64_get_plt_sym_val): Removed.
(elf_x86_64_get_synthetic_symtab): Rewrite to check PLT sections
against all dynamic relocations.
(elf_x86_64_link_setup_gnu_properties): New function.
(elf_backend_create_dynamic_sections): Updated.
(elf_backend_setup_gnu_properties): New.
(elf_x86_64_nacl_plt): New.
(elf_x86_64_nacl_arch_bed): Updated.
ld/
* testsuite/ld-ifunc/ifunc-16-x86-64-now.d: New file.
* testsuite/ld-ifunc/ifunc-2-local-x86-64-now.d: Likewise.
* testsuite/ld-ifunc/ifunc-2-x86-64-now.d: Likewise.
* testsuite/ld-ifunc/pr17154-x86-64-now.d: Likewise.
* testsuite/ld-x86-64/bnd-branch-1-now.d: Likewise.
* testsuite/ld-x86-64/bnd-ifunc-1-now.d: Likewise.
* testsuite/ld-x86-64/bnd-ifunc-2-now.d: Likewise.
* testsuite/ld-x86-64/bnd-plt-1-now.d: Likewise.
* testsuite/ld-x86-64/mpx3n.dd: Likewise.
* testsuite/ld-x86-64/mpx4n.dd: Likewise.
* testsuite/ld-x86-64/plt-main-bnd-now.rd: Likewise.
* testsuite/ld-x86-64/plt2.dd: Likewise.
* testsuite/ld-x86-64/plt2.rd: Likewise.
* testsuite/ld-x86-64/plt2.s: Likewise.
* testsuite/ld-x86-64/pr20830a-now.d: Likewise.
* testsuite/ld-x86-64/pr20830b-now.d: Likewise.
* testsuite/ld-x86-64/pr21038a-now.d: Likewise.
* testsuite/ld-x86-64/pr21038b-now.d: Likewise.
* testsuite/ld-x86-64/pr21038c-now.d: Likewise.
* testsuite/ld-x86-64/load1b-nacl.d: Updated.
* testsuite/ld-x86-64/load1b.d: Likewise.
* testsuite/ld-x86-64/plt-main-bnd.dd: Likewise.
* testsuite/ld-x86-64/pr20253-1h.d: Likewise.
* testsuite/ld-x86-64/pr20830a.d: Update the .plt.got section
with func@plt.
* testsuite/ld-x86-64/pr20830b.d: Likewise.
* testsuite/ld-x86-64/pr21038a.d: Likewise.
* testsuite/ld-x86-64/pr21038c.d: Likewise.
* testsuite/ld-x86-64/mpx.exp: Add some -z now tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
Andreas Krebbel [Mon, 8 May 2017 17:10:42 +0000 (19:10 +0200)]
S/390: Fix ifunc missing runtime reloc
This fixes a problem with a missing R_390_64 reloc against .data for a
function pointer to an ifunc function.
No regressions on s390x.
Pushed to mainline.
bfd/ChangeLog:
2017-05-08 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* elf-s390-common.c: Don't check non_got_ref flag.
* elf32-s390.c (elf_s390_relocate_section): Likewise.
* elf64-s390.c (elf_s390_relocate_section): Likewise.
H.J. Lu [Mon, 8 May 2017 17:10:22 +0000 (10:10 -0700)]
i386: Improve PLT generation and synthetic PLT symbols
On i386, the procedure linkage table (PLT) is used to
1. Call external function.
2. Call internal IFUNC function. The best implementation is selected
for the target processor at run-time.
3. Act as the canonical function address.
4. Support LD_AUDIT to audit external function calls.
5. Support LD_PROFILE to profile external function calls.
PLT looks like:
PLT0: push GOT[1]
jmp *GOT[2]
nop
PLT1: jmp *GOT[name1_index]
push name1_reloc_index
jmp PLT0
GOT is an array of addresses. Initially the GOT entry of name1 is
filled with the address of the "push name1_reloc_index" instruction.
The function, name1, is called via "jmp *GOT[name1]" in the PLT entry.
Even when lazy binding is disabled by "-z now", the PLT0 entry may
still be used with LD_AUDIT or LD_PROFILE if PLT entry is used for
canonical function address.
1. With lazy binding, when the external function, name1, is called the
first time, dynamic linker is called via PLT0 to update GOT[name1_index]
with the actual address of name1 and transfers control to name1
afterwards.
2. PLT is also used to call a local IFUNC function, name1, run-time
loader updates GOT[name1_index] when loading the module.
This patch
1. Remove PLT layout configurations from i386 backend_data.
2. Add generic, lay and non-lazy PLT layout configurations to i386
link_hash_table. Generic PLT layout includes the PLT entry templates,
information how to update the first instruction in PLT and PLT eh_frame
informaton, which are initialized in i386 setup_gnu_properties, based
on PIC and target selection. PLT section alignment is also set to PLT
entry size for non-NaCl/VxWorks target.
3. Remove elf_i386_create_dynamic_sections. create_dynamic_sections
isn't always called, but GOT relocations need GOT relocations. Instead,
create all i386 specific dynamic sections in i386 setup_gnu_properties,
which initializes elf.dynobj, so that i386 check_relocs can be simplified.
4. Rewrite elf_i386_get_synthetic_symtab to check PLT sections against
all dynamic relocations to support both lazy and non-lazy PLTs.
bfd/
* elf32-i386.c (PLT_ENTRY_SIZE): Renamed to ...
(LAZY_PLT_ENTRY_SIZE): This.
(NON_LAZY_PLT_ENTRY_SIZE): New.
(elf_i386_plt0_entry): Renamed to ...
(elf_i386_lazy_plt0_entry): This.
(elf_i386_plt_entry): Renamed to ...
(elf_i386_lazy_plt_entry): This.
(elf_i386_pic_plt0_entry): Renamed to ...
(elf_i386_pic_lazy_plt0_entry): This.
(elf_i386_pic_plt_entry): Renamed to ...
(elf_i386_pic_lazy_plt_entry): This.
(elf_i386_got_plt_entry): Renamed to ...
(elf_i386_non_lazy_plt_entry): This.
(elf_i386_pic_got_plt_entry): Renamed to ...
(elf_i386_pic_non_lazy_plt_entry): This.
(elf_i386_eh_frame_plt): Renamed to ...
(elf_i386_eh_frame_lazy_plt): This.
(elf_i386_eh_frame_plt_got): Renamed to ...
(elf_i386_eh_frame_non_lazy_plt): This.
(elf_i386_plt_layout): Renamed to ...
(elf_i386_lazy_plt_layout): This. Remove eh_frame_plt_got and
eh_frame_plt_got_size.
(elf_i386_non_lazy_plt_layout): New.
(elf_i386_plt_layout): Likewise.
(elf_i386_non_lazy_plt): Likewise.
(GET_PLT_ENTRY_SIZE): Removed.
(elf_i386_plt): Renamed to ...
(elf_i386_lazy_plt): This.
(elf_i386_backend_data): Remove plt. Rename is_vxworks to os.
(elf_i386_arch_bed): Updated.
(elf_i386_link_hash_table): Add plt, lazy_plt and non_lazy_plt.
(elf_i386_create_dynamic_sections): Removed.
(elf_i386_check_relocs): Don't check elf.dynobj. Don't call
_bfd_elf_create_ifunc_sections nor _bfd_elf_create_got_section.
(elf_i386_adjust_dynamic_symbol): Updated.
(elf_i386_allocate_dynrelocs): Updated. Pass 0 as PLT header
size to _bfd_elf_allocate_ifunc_dyn_relocs and don't allocate
size for PLT0 if there is no PLT0.
(elf_i386_size_dynamic_sections): Updated. Check whether GOT
output section is discarded only if GOT isn't empty.
(elf_i386_relocate_section): Updated. Properly get PLT index
if there is no PLT0.
(elf_i386_finish_dynamic_symbol): Updated. Don't fill the
second and third slots in the PLT entry if there is no PLT0.
(elf_i386_finish_dynamic_sections): Updated. Don't fill PLT0
if there is no PLT0. Set sh_entsize on the .plt.got section.
(elf_i386_nacl_plt): Forward declaration.
(elf_i386_get_plt_sym_val): Removed.
(elf_i386_get_synthetic_symtab): Rewrite to check PLT sections
against all dynamic relocations.
(elf_i386_link_setup_gnu_properties): New function.
(elf_backend_create_dynamic_sections): Updated.
(elf_backend_setup_gnu_properties): New.
(elf_i386_nacl_plt): Updated.
(elf_i386_nacl_arch_bed): Likewise.
(elf_i386_vxworks_arch_bed): Likewise.
ld/
* testsuite/ld-i386/i386.exp: Add some -z now tests.
* testsuite/ld-i386/plt-pic2.dd: New file.
* testsuite/ld-i386/plt2.dd: Likewise.
* testsuite/ld-i386/plt2.rd: Likewise.
* testsuite/ld-i386/plt2.s: Likewise.
* testsuite/ld-ifunc/ifunc-16-i386-now.d: Likewise.
* testsuite/ld-ifunc/ifunc-2-i386-now.d: Likewise.
* testsuite/ld-ifunc/ifunc-2-local-i386-now.d: Likewise.
* testsuite/ld-ifunc/pr17154-i386-now.d: Likewise.
* testsuite/ld-i386/pr20830.d: Update the .plt.got section
with func@plt.
Thomas Preud'homme [Mon, 8 May 2017 14:26:51 +0000 (15:26 +0100)]
Make import libraries relocatable objects
For ELF targets --out-implib currently generates an executable file
(e_type is ET_EXEC) despite the file being expected to be linked against
some other object file to make an executable later. It seems therefore
more sensible to make the import library a relocatable object file
(e_type set to ET_REL).
Incidentally, as dicted by requirement 8 of
"ARM v8-M Security Extensions: Requirements on Development Tools"
(document ARM-ECM-0359818) version 1.0, import libraries generated when
using --cmse-implib *must* be relocatable object file so this commit
also adds an assert there in case the type of ELF import library is
changed again in the future.
2017-05-08 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
* elflink.c (elf_output_implib): Remove executable flag from import
library bfd.
* elf32-arm.c (elf32_arm_filter_implib_symbols): Assert that the import
library is a relocatable object file.
ld/
* testsuite/ld-arm/arm-elf.exp
(Secure gateway import library generation): Check e_type field
of import library and executable produced.
* testsuite/ld-arm/cmse-implib.type: Expectations for e_type field.
Alan Hayward [Mon, 8 May 2017 08:40:07 +0000 (09:40 +0100)]
Remove some uses of MAX_REGISTER_SIZE from mips-tdep.c
gdb/
* mips-tdep.c (mips_o32_return_value): Remove unused buffer.
(print_gp_register_row): Use get_frame_register_value.
Alan Hayward [Mon, 8 May 2017 08:37:26 +0000 (09:37 +0100)]
Remove some uses of MAX_REGISTER_SIZE from mips-linux-tdep.c
gdb/
* mips-linux-tdep.c (mips_supply_gregset): Use raw_supply_zeroed.
(mips_supply_fpregset): Likewise.
(mips64_supply_gregset): Likewise.
Alan Hayward [Mon, 8 May 2017 08:35:45 +0000 (09:35 +0100)]
Remove some uses of MAX_REGISTER_SIZE uses from mn10300-linux-tdep.c
gdb/
* mn10300-linux-tdep.c (am33_supply_gregset_method): Use
regcache->raw_supply_zeroed.
GDB Administrator [Mon, 8 May 2017 00:00:41 +0000 (00:00 +0000)]
Automatic date update in version.in
GDB Administrator [Sun, 7 May 2017 00:00:54 +0000 (00:00 +0000)]
Automatic date update in version.in
Sergio Durigan Junior [Wed, 3 May 2017 01:32:33 +0000 (21:32 -0400)]
Rearrange gdb/configure.nat to make it simpler and less redundant
The previous commit introduced gdb/configure.nat, but it was just a
copy-and-past (with the necessary adjustments) from the files under
gdb/config/. We can do better than that.
Instead of using one big 'case' statement that matches the
${gdb_host_cpu} and then match each ${gdb_host}, it is possible to
remove a lof of redundancy by matching the most common ${gdb_host}'s
first, setting the common variables for each, and then proceed to
matching specific ${gdb_host}'s and ${gdb_host_cpu}'s. In other
words, reverse the order of the 'case's and take advantage of the fact
that a lot of parameters are the same for each host.
This commit was tested on x86_64 without regressions.
gdb/ChangeLog:
2017-05-06 Sergio Durigan Junior <sergiodj@redhat.com>
* configure.nat: Rearrange 'case' statements to match
host before cpu.
Sergio Durigan Junior [Tue, 25 Apr 2017 20:03:39 +0000 (16:03 -0400)]
Introduce "gdb/configure.nat" (and delete "gdb/config/*/*.mh" files)
Due to my ongoing work to make it possible for gdbserver to start the
inferior using the shell, I had to share the fork_inferior function
under the "nat/" directory. In order to do that, I created a new file
and put the function there; however, this meant that I now had to
update some of the *.mh files (under "gdb/config") and add the new
file as a dependency to be built natively. Bleh...
After talking a bit to Pedro about this, the idea came up to write a
new "gdb/configure.nat" file, a la "gdb/configure.tgt", which would
concentrate all of the native settings for each host/system. I
decided to tackle this issue.
The patch is simple. All of the previous Makefile variables that were
being declared inside the *.mh files are now inside "gdb/Makefile.in",
and "gdb/configure" is responsible for AC_SUBST'ing them. The
definitions of these variables were put inside "gdb/configure.nat", so
now they're shell variables. For excerpts of Makefile code, one must
create a file under "gdb/config/${gdb_cpu_host}" and reference it on
the "nat_extra_makefile_frag" variable.
It should now be easier to update the native dependencies of hosts in
this single file.
This has been tested on x86_64 without regressions.
gdb/ChangeLog:
2017-05-06 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in: Remove "@host_makefile_frag@". Add variables
NAT_FILE, NATDEPFILES, NAT_CDEPS, LOADLIBES, MH_CFLAGS, XM_CLIBS,
NAT_GENERATED_FILES, HAVE_NATIVE_GCORE_HOST. Add
"@nat_extra_makefile_frag@".
(Makefile): Remove dependency on "@frags@".
($(GNULIB_BUILDDIR)/Makefile): Likewise.
(data-directory/Makefile): Likewise.
* config/aarch64/linux.mh: Deleted; moved contents to
"gdb/configure.nat".
* config/alpha/alpha-linux.mh: Likewise.
* config/alpha/nbsd.mh: Likewise.
* config/arm/linux.mh: Likewise.
* config/arm/nbsdelf.mh: Likewise.
* config/i386/cygwin.mh: Likewise.
* config/i386/cygwin64.mh: Likewise.
* config/i386/darwin.mh: Likewise.
* config/i386/fbsd.mh: Likewise.
* config/i386/fbsd64.mh: Likewise.
* config/i386/go32.mh: Likewise.
* config/i386/i386gnu.mh: Likewise.
* config/i386/i386sol2.mh: Likewise.
* config/i386/linux.mh: Likewise.
* config/i386/linux64.mh: Likewise.
* config/i386/mingw.mh: Likewise.
* config/i386/mingw64.mh: Likewise.
* config/i386/nbsd64.mh: Likewise.
* config/i386/nbsdelf.mh: Likewise.
* config/i386/nto.mh: Likewise.
* config/i386/obsd.mh: Likewise.
* config/i386/obsd64.mh: Likewise.
* config/i386/sol2-64.mh: Likewise.
* config/ia64/linux.mh: Likewise.
* config/m32r/linux.mh: Likewise.
* config/m68k/linux.mh: Likewise.
* config/m68k/nbsdelf.mh: Likewise.
* config/m68k/obsd.mh: Likewise.
* config/m88k/obsd.mh: Likewise.
* config/mips/fbsd.mh: Likewise.
* config/mips/linux.mh: Likewise.
* config/mips/nbsd.mh: Likewise.
* config/mips/obsd64.mh: Likewise.
* config/pa/linux.mh: Likewise.
* config/pa/nbsd.mh: Likewise.
* config/pa/obsd.mh: Likewise.
* config/powerpc/aix.mh: Likewise.
* config/powerpc/fbsd.mh: Likewise.
* config/powerpc/linux.mh: Likewise.
* config/powerpc/nbsd.mh: Likewise.
* config/powerpc/obsd.mh: Likewise.
* config/powerpc/ppc64-linux.mh: Likewise.
* config/powerpc/spu-linux.mh: Likewise.
* config/s390/linux.mh: Likewise.
* config/sh/nbsd.mh: Likewise.
* config/sparc/fbsd.mh: Likewise.
* config/sparc/linux.mh: Likewise.
* config/sparc/linux64.mh: Likewise.
* config/sparc/nbsd64.mh: Likewise.
* config/sparc/nbsdelf.mh: Likewise.
* config/sparc/obsd64.mh: Likewise.
* config/sparc/sol2.mh: Likewise.
* config/tilegx/linux.mh: Likewise.
* config/vax/nbsdelf.mh: Likewise.
* config/vax/obsd.mh: Likewise.
* config/xtensa/linux.mh: Likewise.
* config/i386/i386gnu.mn: New file, with excerpts from
"config/i386/i386gnu.mh".
* configure: Regenerate.
* configure.ac: Rewrite code to use "gdb/configure.nat" instead of
*.mh files under "gdb/config".
* configure.nat: New file, with contents from the
"gdb/config/*/*.mh" files.
gdb/doc/ChangeLog:
2017-05-06 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile: Remove "@host_makefile_frag@".
GDB Administrator [Sat, 6 May 2017 00:00:53 +0000 (00:00 +0000)]
Automatic date update in version.in
Tim Wiederhake [Fri, 5 May 2017 06:20:50 +0000 (08:20 +0200)]
btrace: Fix memory leak in btrace_clear.
projects / external / binutils.git / log