Linus Torvalds [Fri, 26 Nov 2021 20:01:31 +0000 (12:01 -0800)]
Merge tag 'fuse-fixes-5.16-rc3' of git://git./linux/kernel/git/mszeredi/fuse
Pull fuse fix from Miklos Szeredi:
"Fix a regression caused by a bugfix in the previous release. The
symptom is a VM_BUG_ON triggered from splice to the fuse device.
Unfortunately the original bugfix was already backported to a number
of stable releases, so this fix-fix will need to be backported as
well"
* tag 'fuse-fixes-5.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: release pipe buf after last use
Linus Torvalds [Fri, 26 Nov 2021 19:24:32 +0000 (11:24 -0800)]
Merge tag 'for-5.16-rc2-tag' of git://git./linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"One more fix to the lzo code, a missing put_page causing memory leaks
when some error branches are taken"
* tag 'for-5.16-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix the memory leak caused in lzo_compress_pages()
Linus Torvalds [Fri, 26 Nov 2021 18:33:17 +0000 (10:33 -0800)]
Merge tag 'char-misc-5.16-rc3' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc driver fix from Greg KH:
"Here is a single binder driver fix for 5.16-rc3.
It resolves a problem reported in the set of binder fixes that went
into 5.16-rc1. It has been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
binder: fix test regression due to sender_euid change
Linus Torvalds [Fri, 26 Nov 2021 18:27:43 +0000 (10:27 -0800)]
Merge tag 'staging-5.16-rc3' of git://git./linux/kernel/git/gregkh/staging
Pull staging fixes from Greg KH:
"Here are some small staging driver fixes and one driver removal for
5.16-rc3.
The fixes resolve a number of small issues found in 5.16-rc1, nothing
huge at all. The driver removal was due to a platform being removed in
5.16-rc1, but this driver was forgotten about. It wasn't being built
anymore so it's safe to delete.
All have been in linux-next for a while with no reported problems"
* tag 'staging-5.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8192e: Fix use after free in _rtl92e_pci_disconnect()
staging: greybus: Add missing rwsem around snd_ctl_remove() calls
staging: Remove Netlogic XLP network driver
staging: r8188eu: fix a memory leak in rtw_wx_read32()
staging: r8188eu: use GFP_ATOMIC under spinlock
staging: r8188eu: Use kzalloc() with GFP_ATOMIC in atomic context
staging/fbtft: Fix backlight
staging: r8188eu: Fix breakage introduced when 5G code was removed
Linus Torvalds [Fri, 26 Nov 2021 18:22:47 +0000 (10:22 -0800)]
Merge tag 'usb-5.16-rc1' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of small USB fixes for reported problems for
5.16-rc3
They include:
- typec driver fixes
- new usb-serial driver ids
- usb hub enumeration issues that were much reported
- gadget driver fixes
- dwc3 driver fix
- chipidea driver fixe
All of these have been in linux-next with no reported problems"
* tag 'usb-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: option: add Fibocom FM101-GL variants
usb: typec: tipd: Fix initialization sequence for cd321x
usb: typec: tipd: Fix typo in cd321x_switch_power_state
usb: hub: Fix locking issues with address0_mutex
USB: serial: pl2303: fix GC type detection
USB: serial: option: add Telit LE910S1 0x9200 composition
usb: chipidea: ci_hdrc_imx: fix potential error pointer dereference in probe
usb: hub: Fix usb enumeration issue due to address0 race
usb: typec: fusb302: Fix masking of comparator and bc_lvl interrupts
usb: dwc3: leave default DMA for PCI devices
usb: dwc2: hcd_queue: Fix use of floating point literal
usb: dwc3: gadget: Fix null pointer exception
usb: gadget: udc-xilinx: Fix an error handling path in 'xudc_probe()'
usb: xhci: tegra: Check padctrl interrupt presence in device tree
usb: dwc2: gadget: Fix ISOC flow for elapsed frames
usb: dwc3: gadget: Check for L1/L2/U3 for Start Transfer
usb: dwc3: gadget: Ignore NoStream after End Transfer
usb: dwc3: core: Revise GHWPARAMS9 offset
Linus Torvalds [Fri, 26 Nov 2021 18:10:19 +0000 (10:10 -0800)]
Merge tag 'mmc-v5.16-rc1' of git://git./linux/kernel/git/ulfh/mmc
Pull MMC host fixes from Ulf Hansson:
- mmc_spi: Add SPI IDs to silence warning
- sdhci: Fix ADMA for PAGE_SIZE >= 64KiB
- sdhci-esdhc-imx: Disable broken CMDQ for imx8qm/imx8qxp/imx8mm
* tag 'mmc-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: spi: Add device-tree SPI IDs
mmc: sdhci: Fix ADMA for PAGE_SIZE >= 64KiB
mmc: sdhci-esdhc-imx: disable CMDQ support
Linus Torvalds [Fri, 26 Nov 2021 17:59:55 +0000 (09:59 -0800)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"I2C has an interrupt storm fix for the i801, better timeout handling
for the new virtio driver, and some documentation fixes this time"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
docs: i2c: smbus-protocol: mention the repeated start condition
i2c: virtio: disable timeout handling
i2c: i801: Fix interrupt storm from SMB_ALERT signal
i2c: i801: Restore INTREN on unload
dt-bindings: i2c: imx-lpi2c: Fix i.MX 8QM compatible matching
Linus Torvalds [Fri, 26 Nov 2021 17:54:13 +0000 (09:54 -0800)]
Merge tag 'for-linus-5.16c-rc3-tag' of git://git./linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- Kconfig fix to make it possible to control building of the privcmd
driver
- three fixes for issues identified by the kernel test robot
- a five-patch series to simplify timeout handling for Xen PV driver
initialization
- two patches to fix error paths in xenstore/xenbus driver
initialization
* tag 'for-linus-5.16c-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: make HYPERVISOR_set_debugreg() always_inline
xen: make HYPERVISOR_get_debugreg() always_inline
xen: detect uninitialized xenbus in xenbus_init
xen: flag xen_snd_front to be not essential for system boot
xen: flag pvcalls-front to be not essential for system boot
xen: flag hvc_xen to be not essential for system boot
xen: flag xen_drm_front to be not essential for system boot
xen: add "not_essential" flag to struct xenbus_driver
xen/pvh: add missing prototype to header
xen: don't continue xenstore initialization in case of errors
xen/privcmd: make option visible in Kconfig
Linus Torvalds [Fri, 26 Nov 2021 17:30:24 +0000 (09:30 -0800)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Three arm64 fixes.
The main one is a fix to the way in which we evaluate the macro
arguments to our uaccess routines, which we _think_ might be the root
cause behind some unkillable tasks we've seen in the Android arm64 CI
farm (testing is ongoing). In any case, it's worth fixing.
Other than that, we've toned down an over-zealous VM_BUG_ON() and
fixed ftrace stack unwinding in a bunch of cases.
Summary:
- Evaluate uaccess macro arguments outside of the critical section
- Tighten up VM_BUG_ON() in pmd_populate_kernel() to avoid false positive
- Fix ftrace stack unwinding using HAVE_FUNCTION_GRAPH_RET_ADDR_PTR"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: uaccess: avoid blocking within critical sections
arm64: mm: Fix VM_BUG_ON(mm != &init_mm) for trans_pgd
arm64: ftrace: use HAVE_FUNCTION_GRAPH_RET_ADDR_PTR
Qu Wenruo [Sat, 20 Nov 2021 08:34:11 +0000 (16:34 +0800)]
btrfs: fix the memory leak caused in lzo_compress_pages()
[BUG]
Fstests generic/027 is pretty easy to trigger a slow but steady memory
leak if run with "-o compress=lzo" mount option.
Normally one single run of generic/027 is enough to eat up at least 4G ram.
[CAUSE]
In commit
d4088803f511 ("btrfs: subpage: make lzo_compress_pages()
compatible") we changed how @page_in is released.
But that refactoring makes @page_in only released after all pages being
compressed.
This leaves error path not releasing @page_in. And by "error path"
things like incompressible data will also be treated as an error
(-E2BIG).
Thus it can cause a memory leak if even nothing wrong happened.
[FIX]
Add check under @out label to release @page_in when needed, so when we
hit any error, the input page is properly released.
Reported-by: Josef Bacik <josef@toxicpanda.com>
Fixes: d4088803f511 ("btrfs: subpage: make lzo_compress_pages() compatible")
Reviewed-and-tested-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Linus Torvalds [Fri, 26 Nov 2021 02:21:20 +0000 (18:21 -0800)]
Merge tag 'drm-fixes-2021-11-26' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"No idea if turkey comes before pull request processing, but here's the
regular week's fixes. A bunch for amdgpu, nouveau adds support for a
new GPU (like a PCI ID addition), and a scattering of fixes across
i915/hyperv/aspeed/vc4.
Specifics:
amdgpu:
- SRIOV fixes
- dma-buf double free fix
- Display fixes for GPU resets
- Fix DSC powergating regression
- GPU TSC fixes
- Interrupt handler overflow fixes
- Endian fix in IP discovery table handling
- Aldebaran ASPM fix
- Fix overclocking regression on older asics
- Backlight/ACPI fix
amdkfd:
- SVM fixes
- VMA removal race fix
hyperv:
- removal fix
aspeed:
- vga_pw sysfs file fix
vc4:
- error checking fix
nouveau:
- support GA106
- fix a few error checks
i915:
- fix wakeref handling around PXP suspend"
* tag 'drm-fixes-2021-11-26' of git://anongit.freedesktop.org/drm/drm: (25 commits)
drm/amd/display: update bios scratch when setting backlight
drm/amdgpu/pm: fix powerplay OD interface
drm/amdgpu: Skip ASPM programming on aldebaran
drm/amdgpu: fix byteorder error in amdgpu discovery
drm/amdgpu: enable Navi retry fault wptr overflow
drm/amdgpu: enable Navi 48-bit IH timestamp counter
drm/amdkfd: simplify drain retry fault
drm/amdkfd: handle VMA remove race
drm/amdkfd: process exit and retry fault race
drm/amdgpu: IH process reset count when restart
drm/amdgpu/gfx9: switch to golden tsc registers for renoir+
drm/amdgpu/gfx10: add wraparound gpu counter check for APUs as well
drm/amdgpu: move kfd post_reset out of reset_sriov function
drm/amd/display: Fixed DSC would not PG after removing DSC stream
drm/amd/display: Reset link encoder assignments for GPU reset
drm/amd/display: Set plane update flags for all planes in reset
drm/amd/display: Fix DPIA outbox timeout after GPU reset
drm/amdgpu: Fix double free of dmabuf
drm/amdgpu: Fix MMIO HDP flush on SRIOV
drm/i915/gt: Hold RPM wakelock during PXP suspend
...
Dave Airlie [Fri, 26 Nov 2021 00:36:06 +0000 (10:36 +1000)]
Merge tag 'drm-intel-fixes-2021-11-24' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
Fix wakeref handling of PXP suspend.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YZ65bsPOK+6JLv0d@intel.com
Dave Airlie [Fri, 26 Nov 2021 00:08:10 +0000 (10:08 +1000)]
Merge tag 'drm-misc-fixes-2021-11-25' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
One removal fix for hyperv, one fix in aspeed for the vga_pw sysfs file
content, one error-checking fix for vc4 and two fixes for nouveau, one
to support a new device and another one to properly check for errors.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211125101819.ynu7zgbs7yfwedri@houat
Dave Airlie [Thu, 25 Nov 2021 23:24:15 +0000 (09:24 +1000)]
Merge tag 'amd-drm-fixes-5.16-2021-11-24' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-5.16-2021-11-24:
amdgpu:
- SRIOV fixes
- dma-buf double free fix
- Display fixes for GPU resets
- Fix DSC powergating regression
- GPU TSC fixes
- Interrupt handler overflow fixes
- Endian fix in IP discovery table handling
- Aldebaran ASPM fix
- Fix overclocking regression on older asics
- Backlight/ACPI fix
amdkfd:
- SVM fixes
- VMA removal race fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124212056.6327-1-alexander.deucher@amd.com
Linus Torvalds [Thu, 25 Nov 2021 19:06:05 +0000 (11:06 -0800)]
Merge tag 'block-5.16-2021-11-25' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- Add a NO APST quirk for a Kioxia device (Enzo Matsumiya)
- Fix write zeroes pi (Klaus Jensen)
- Various TCP transport fixes (Maurizio Lombardi and Varun
Prakash)
- Ignore invalid fast_io_fail_tmo values (Maurizio Lombardi)
- Use IOCB_NOWAIT only if the filesystem supports it (Maurizio
Lombardi)
- Module loading fix (Ming)
- Kerneldoc warning fix (Yang)
* tag 'block-5.16-2021-11-25' of git://git.kernel.dk/linux-block:
block: fix parameter not described warning
nvmet: use IOCB_NOWAIT only if the filesystem supports it
nvme: fix write zeroes pi
nvme-fabrics: ignore invalid fast_io_fail_tmo values
nvme-pci: add NO APST quirk for Kioxia device
nvme-tcp: fix memory leak when freeing a queue
nvme-tcp: validate R2T PDU in nvme_tcp_handle_r2t()
nvmet-tcp: fix incomplete data digest send
nvmet-tcp: fix memory leak when performing a controller reset
nvmet-tcp: add an helper to free the cmd buffers
nvmet-tcp: fix a race condition between release_queue and io_work
block: avoid to touch unloaded module instance when opening bdev
Linus Torvalds [Thu, 25 Nov 2021 18:57:45 +0000 (10:57 -0800)]
Merge tag 'io_uring-5.16-2021-11-25' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"A locking fix for link traversal, and fixing up an outdated function
name in a comment"
* tag 'io_uring-5.16-2021-11-25' of git://git.kernel.dk/linux-block:
io_uring: correct link-list traversal locking
io_uring: fix missed comment from *task_file rename
Linus Torvalds [Thu, 25 Nov 2021 18:48:14 +0000 (10:48 -0800)]
Merge tag '5.16-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Four small cifs/smb3 fixes:
- two multichannel fixes
- fix problem noted by kernel test robot
- update internal version number"
* tag '5.16-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal version number
smb2: clarify rc initialization in smb2_reconnect
cifs: populate server_hostname for extra channels
cifs: nosharesock should be set on new server
Linus Torvalds [Thu, 25 Nov 2021 18:41:28 +0000 (10:41 -0800)]
Merge tag 'asm-generic-5.16-2' of git://git./linux/kernel/git/arnd/asm-generic
Pull asm-generic syscall table update from Arnd Bergmann:
"André Almeida sends an update for the newly added futex_waitv syscall
that was initially only added to a few architectures.
Some additional ones have since made it through architecture
maintainer trees, this finishes the remaining ones"
* tag 'asm-generic-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
futex: Wireup futex_waitv syscall
Linus Torvalds [Thu, 25 Nov 2021 18:31:37 +0000 (10:31 -0800)]
Merge tag 'arm-fixes-5.16-2' of git://git./linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There are only a few devicetree fixes this time:
- one outdated devicetree property that slipped into the newly added
ExynosAutov9 support
- three changes to Broadcom SoCs that had incorrect number values for
interrupts or irqchips.
In the MAINTAINERS file, Nishanth Menon gets listed for TI K3 SoCs,
while Taichi Sugaya and Takao Orito take ownership of the Socionext
Milbeaut platform.
All other changes are for SoC specific drivers, fixing:
- A missing NULL pointer check in the mediatek memory driver
- An integer overflow issue in the Arm smccc firwmare interface
- A false-positive fortify-source check
- Error handling fixes for optee and smci
- Incorrect message format in one SCMI call"
* tag 'arm-fixes-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
memory: mtk-smi: Fix a null dereference for the ostd
arm64: dts: exynos: drop samsung,ufs-shareability-reg-offset in ExynosAutov9
MAINTAINERS: Update maintainer entry for keystone platforms
MAINTAINERS: Add entry to MAINTAINERS for Milbeaut
firmware: smccc: Fix check for ARCH_SOC_ID not implemented
ARM: socfpga: Fix crash with CONFIG_FORTIRY_SOURCE
firmware: arm_scmi: Fix type error assignment in voltage protocol
firmware: arm_scmi: Fix type error in sensor protocol
firmware: arm_scmi: pm: Propagate return value to caller
firmware: arm_scmi: Fix base agent discover response
optee: fix kfree NULL pointer
ARM: dts: bcm2711: Fix PCIe interrupts
ARM: dts: BCM5301X: Add interrupt properties to GPIO node
ARM: dts: BCM5301X: Fix I2C controller interrupt
firmware: arm_scmi: Fix null de-reference on error path
Linus Torvalds [Thu, 25 Nov 2021 18:13:56 +0000 (10:13 -0800)]
Merge tag 'folio-5.16b' of git://git.infradead.org/users/willy/pagecache
Pull folio fixes from Matthew Wilcox:
"In the course of preparing the folio changes for iomap for next merge
window, we discovered some problems that would be nice to address now:
- Renaming multi-page folios to large folios.
mapping_multi_page_folio_support() is just a little too long, so we
settled on mapping_large_folio_support(). That meant renaming, eg
folio_test_multi() to folio_test_large().
Rename AS_THP_SUPPORT to match
- I hadn't included folio wrappers for zero_user_segments(), etc.
Also, multi-page^W^W large folio support is now independent of
CONFIG_TRANSPARENT_HUGEPAGE, so machines with HIGHMEM always need
to fall back to the out-of-line zero_user_segments().
Remove FS_THP_SUPPORT to match
- The build bots finally got round to telling me that I missed a
couple of architectures when adding flush_dcache_folio(). Christoph
suggested that we just add linux/cacheflush.h and not rely on
asm-generic/cacheflush.h"
* tag 'folio-5.16b' of git://git.infradead.org/users/willy/pagecache:
mm: Add functions to zero portions of a folio
fs: Rename AS_THP_SUPPORT and mapping_thp_support
fs: Remove FS_THP_SUPPORT
mm: Remove folio_test_single
mm: Rename folio_test_multi to folio_test_large
Add linux/cacheflush.h
Yang Guang [Thu, 25 Nov 2021 16:20:55 +0000 (00:20 +0800)]
block: fix parameter not described warning
The build warning:
block/blk-core.c:968: warning: Function parameter or member 'iob'
not described in 'bio_poll'.
Fixes: 5a72e899ceb4 ("block: add a struct io_comp_batch argument to fops->iopoll()")
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Juergen Gross [Thu, 25 Nov 2021 09:20:56 +0000 (10:20 +0100)]
xen: make HYPERVISOR_set_debugreg() always_inline
HYPERVISOR_set_debugreg() is being called from noinstr code, so it
should be attributed "always_inline".
Fixes: 7361fac0465ba96ec8f ("x86/xen: Make set_debugreg() noinstr")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20211125092056.24758-3-jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Juergen Gross [Thu, 25 Nov 2021 09:20:55 +0000 (10:20 +0100)]
xen: make HYPERVISOR_get_debugreg() always_inline
HYPERVISOR_get_debugreg() is being called from noinstr code, so it
should be attributed "always_inline".
Fixes: f4afb713e5c3a4419ba ("x86/xen: Make get_debugreg() noinstr")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20211125092056.24758-2-jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Jens Axboe [Thu, 25 Nov 2021 14:51:24 +0000 (07:51 -0700)]
Merge tag 'nvme-5.16-2021-11-25' of git://git.infradead.org/nvme into block-5.16
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 5.16
- add a NO APST quirk for a Kioxia device (Enzo Matsumiya)
- fix write zeroes pi (Klaus Jensen)
- various TCP transport fixes (Maurizio Lombardi and Varun Prakash)
- ignore invalid fast_io_fail_tmo values (Maurizio Lombardi)
- use IOCB_NOWAIT only if the filesystem supports it (Maurizio Lombardi)"
* tag 'nvme-5.16-2021-11-25' of git://git.infradead.org/nvme:
nvmet: use IOCB_NOWAIT only if the filesystem supports it
nvme: fix write zeroes pi
nvme-fabrics: ignore invalid fast_io_fail_tmo values
nvme-pci: add NO APST quirk for Kioxia device
nvme-tcp: fix memory leak when freeing a queue
nvme-tcp: validate R2T PDU in nvme_tcp_handle_r2t()
nvmet-tcp: fix incomplete data digest send
nvmet-tcp: fix memory leak when performing a controller reset
nvmet-tcp: add an helper to free the cmd buffers
nvmet-tcp: fix a race condition between release_queue and io_work
Maurizio Lombardi [Mon, 22 Nov 2021 10:08:27 +0000 (11:08 +0100)]
nvmet: use IOCB_NOWAIT only if the filesystem supports it
Submit I/O requests with the IOCB_NOWAIT flag set only if
the underlying filesystem supports it.
Fixes: 50a909db36f2 ("nvmet: use IOCB_NOWAIT for file-ns buffered I/O")
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Yong Wu [Wed, 24 Nov 2021 08:50:42 +0000 (09:50 +0100)]
memory: mtk-smi: Fix a null dereference for the ostd
We add the ostd setting for mt8195. It introduces a KE for the
previous SoC which doesn't have ostd setting. This is the log:
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000080
...
pc : mtk_smi_larb_config_port_gen2_general+0x64/0x130
lr : mtk_smi_larb_resume+0x54/0x98
...
Call trace:
mtk_smi_larb_config_port_gen2_general+0x64/0x130
pm_generic_runtime_resume+0x2c/0x48
__genpd_runtime_resume+0x30/0xa8
genpd_runtime_resume+0x94/0x2c8
__rpm_callback+0x44/0x150
rpm_callback+0x6c/0x78
rpm_resume+0x310/0x558
__pm_runtime_resume+0x3c/0x88
In the code: larbostd = larb->larb_gen->ostd[larb->larbid],
if "larb->larb_gen->ostd" is null, the "larbostd" is the offset(e.g.
0x80 above), it's also a valid value, then accessing "larbostd[i]" in the
"for" loop will cause the KE above. To avoid this issue, initialize
"larbostd" to NULL when the SoC doesn't have ostd setting.
Fixes: fe6dd2a4017d ("memory: mtk-smi: mt8195: Add initial setting for smi-larb")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211108082429.15080-1-yong.wu@mediatek.com
Link: https://lore.kernel.org/r/20211124085042.9649-3-krzysztof.kozlowski@canonical.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Chanho Park [Wed, 24 Nov 2021 08:50:41 +0000 (09:50 +0100)]
arm64: dts: exynos: drop samsung,ufs-shareability-reg-offset in ExynosAutov9
samsung,ufs-shareability-reg-offset is not necessary anymore since it
was integrated into the second argument of samsung,sysreg.
Fixes: 31bbac5263aa ("arm64: dts: exynos: add initial support for exynosautov9 SoC")
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211102064826.15796-1-chanho61.park@samsung.com
Link: https://lore.kernel.org/r/20211124085042.9649-2-krzysztof.kozlowski@canonical.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Nishanth Menon [Tue, 23 Nov 2021 00:17:25 +0000 (18:17 -0600)]
MAINTAINERS: Update maintainer entry for keystone platforms
Switch the kernel tree for keystone to the consolidated ti tree and add
myself as primary maintainer for keystone platforms to offset Santosh's
workload.
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Link: https://lore.kernel.org/r/20211123001725.21422-1-nm@ti.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
André Almeida [Wed, 24 Nov 2021 13:21:12 +0000 (10:21 -0300)]
futex: Wireup futex_waitv syscall
Wireup futex_waitv syscall for all remaining archs.
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Miklos Szeredi [Thu, 25 Nov 2021 13:05:18 +0000 (14:05 +0100)]
fuse: release pipe buf after last use
Checking buf->flags should be done before the pipe_buf_release() is called
on the pipe buffer, since releasing the buffer might modify the flags.
This is exactly what page_cache_pipe_buf_release() does, and which results
in the same VM_BUG_ON_PAGE(PageLRU(page)) that the original patch was
trying to fix.
Reported-by: Justin Forbes <jmforbes@linuxtx.org>
Fixes: 712a951025c0 ("fuse: fix page stealing")
Cc: <stable@vger.kernel.org> # v2.6.35
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Greg Kroah-Hartman [Thu, 25 Nov 2021 12:27:40 +0000 (13:27 +0100)]
Merge tag 'usb-serial-5.16-rc3' of https://git./linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for 5.16-rc3
Here's a fix for a pl2303 type-detection issue and some new modem
devices ids.
All but the last commit have been in linux-next, and with no reported
issues.
* tag 'usb-serial-5.16-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Fibocom FM101-GL variants
USB: serial: pl2303: fix GC type detection
USB: serial: option: add Telit LE910S1 0x9200 composition
Alex Deucher [Tue, 23 Nov 2021 15:44:48 +0000 (10:44 -0500)]
drm/amd/display: update bios scratch when setting backlight
Update the bios scratch register when updating the backlight
level. Some platforms apparently read this scratch register
and do additional operations in their hotkey handlers.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1518
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 23 Nov 2021 16:36:01 +0000 (11:36 -0500)]
drm/amdgpu/pm: fix powerplay OD interface
The overclocking interface currently appends data to a
string. Revert back to using sprintf().
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1774
Fixes: 6db0c87a0a8ee1 ("amdgpu/pm: Replace hwmgr smu usage of sprintf with sysfs_emit")
Acked-by: Evan Quan <evan.quan@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Lijo Lazar [Wed, 24 Nov 2021 11:26:38 +0000 (19:26 +0800)]
drm/amdgpu: Skip ASPM programming on aldebaran
There is no need for additional programming, keep the default settings.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yang Wang [Wed, 24 Nov 2021 04:26:02 +0000 (12:26 +0800)]
drm/amdgpu: fix byteorder error in amdgpu discovery
fix some byteorder issues about amdgpu discovery.
This will result in running errors on the big end system. (e.g:MIPS)
Signed-off-by: Yang Wang <KevinYang.Wang@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Tue, 23 Nov 2021 15:20:17 +0000 (10:20 -0500)]
drm/amdgpu: enable Navi retry fault wptr overflow
If xnack is on, VM retry fault interrupt send to IH ring1, and ring1
will be full quickly. IH cannot receive other interrupts, this causes
deadlock if migrating buffer using sdma and waiting for sdma done
while handling retry fault.
Remove VMC from IH storm client, enable ring1 write pointer
overflow, then IH will drop retry fault interrupts and be able to receive
other interrupts while driver is handling retry fault.
IH ring1 write pointer doesn't writeback to memory by IH, and ring1
write pointer recorded by self-irq is not updated, so always read
the latest ring1 write pointer from register.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Tue, 23 Nov 2021 14:59:46 +0000 (09:59 -0500)]
drm/amdgpu: enable Navi 48-bit IH timestamp counter
By default this timestamp is 32 bit counter. It gets overflowed in
around 10 minutes.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Fri, 19 Nov 2021 22:02:50 +0000 (17:02 -0500)]
drm/amdkfd: simplify drain retry fault
unmap range always increase atomic svms->drain_pagefaults to simplify
both parent range and child range unmap, page fault handle ignores the
retry fault if svms->drain_pagefaults is set to speed up interrupt
handling. svm_range_drain_retry_fault restart draining if another
range unmap from cpu.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Fri, 19 Nov 2021 21:16:39 +0000 (16:16 -0500)]
drm/amdkfd: handle VMA remove race
VMA may be removed before unmap notifier callback, and deferred list
work remove range, return success for this special case as we are
handling stale retry fault.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Tue, 16 Nov 2021 16:45:32 +0000 (11:45 -0500)]
drm/amdkfd: process exit and retry fault race
kfd_process_wq_release drain retry fault to ensure no retry fault comes
after removing kfd process from the hash table, otherwise svm page fault
handler will fail to recover the fault and dump GPU vm fault log.
Refactor deferred list work to get_task_mm and take mmap write lock
to handle all ranges, and avoid mm is gone while inserting mmu notifier.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Sat, 13 Nov 2021 00:05:08 +0000 (19:05 -0500)]
drm/amdgpu: IH process reset count when restart
Otherwise when IH process restart, count is zero, the loop will
not exit to wake_up_all after processing AMDGPU_IH_MAX_NUM_IVS
interrupts.
Cc: stable@vger.kernel.org
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 18 Nov 2021 19:50:37 +0000 (14:50 -0500)]
drm/amdgpu/gfx9: switch to golden tsc registers for renoir+
Renoir and newer gfx9 APUs have new TSC register that is
not part of the gfxoff tile, so it can be read without
needing to disable gfx off.
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 18 Nov 2021 19:33:23 +0000 (14:33 -0500)]
drm/amdgpu/gfx10: add wraparound gpu counter check for APUs as well
Apply the same check we do for dGPUs for APUs as well.
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
shaoyunl [Thu, 18 Nov 2021 16:43:16 +0000 (11:43 -0500)]
drm/amdgpu: move kfd post_reset out of reset_sriov function
Fixes: 9f4f2c1a3524 ("drm/amd/amdgpu: fix the kfd pre_reset sequence in sriov")
For sriov XGMI configuration, the host driver will handle the hive reset,
so in guest side, the reset_sriov only be called once on one device. This will
make kfd post_reset unblanced with kfd pre_reset since kfd pre_reset already
been moved out of reset_sriov function. Move kfd post_reset out of reset_sriov
function to make them balance .
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yi-Ling Chen [Wed, 10 Nov 2021 06:26:53 +0000 (14:26 +0800)]
drm/amd/display: Fixed DSC would not PG after removing DSC stream
[WHY]
Due to pass the wrong parameter down to the enable_stream_gating(),
it would cause the DSC of the removing stream would not be PG.
[HOW]
To pass the correct parameter down th the enable_stream_gating().
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Yi-Ling Chen <Yi-Ling.Chen2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Tue, 9 Nov 2021 21:03:21 +0000 (16:03 -0500)]
drm/amd/display: Reset link encoder assignments for GPU reset
[Why]
A warning appears in the log on GPU reset for
link_enc_cfg_link_encs_assign for the following condition:
ASSERT(state->res_ctx.link_enc_cfg_ctx.link_enc_assignments[i].valid == false);
This is not expected behavior and may result in link encoders being
incorrectly assigned.
[How]
The dc->current_state is backed up into dm->cached_dc_state before
we commit 0 streams.
DC will clear link encoder assignments on the real state but the
changes won't propagate over to the copy we made before the
0 streams commit.
DC expects that link encoder assignments are *not* valid
when committing a state, so as a workaround it needs to be cleared
before passing it back into DC.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Tue, 9 Nov 2021 16:24:10 +0000 (11:24 -0500)]
drm/amd/display: Set plane update flags for all planes in reset
[Why]
We're only setting the flags on stream[0]'s planes so this logic fails
if we have more than one stream in the state.
This can cause a page flip timeout with multiple displays in the
configuration.
[How]
Index into the stream_status array using the stream index - it's a 1:1
mapping.
Fixes: cdaae8371aa9 ("drm/amd/display: Handle GPU reset for DC block")
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Mon, 8 Nov 2021 21:49:48 +0000 (16:49 -0500)]
drm/amd/display: Fix DPIA outbox timeout after GPU reset
[Why]
The HW interrupt gets disabled after GPU reset so we don't receive
notifications for HPD or AUX from DMUB - leading to timeout and
black screen with (or without) DPIA links connected.
[How]
Re-enable the interrupt after GPU reset like we do for the other
DC interrupts.
Fixes: 81927e2808be ("drm/amd/display: Support for DMUB AUX")
Reviewed-by: Jude Shih <Jude.Shih@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
xinhui pan [Fri, 19 Nov 2021 10:08:31 +0000 (18:08 +0800)]
drm/amdgpu: Fix double free of dmabuf
amdgpu_amdkfd_gpuvm_free_memory_of_gpu drop dmabuf reference increased in
amdgpu_gem_prime_export.
amdgpu_bo_destroy drop dmabuf reference increased in
amdgpu_gem_prime_import.
So remove this extra dma_buf_put to avoid double free.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Tested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Felix Kuehling [Thu, 4 Nov 2021 20:15:43 +0000 (16:15 -0400)]
drm/amdgpu: Fix MMIO HDP flush on SRIOV
Disable HDP register remapping on SRIOV and set rmmio_remap.reg_offset
to the fixed address of the VF register for hdp_v*_flush_hdp.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: Bokun Zhang <bokun.zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mingjie Zhang [Tue, 23 Nov 2021 13:37:57 +0000 (21:37 +0800)]
USB: serial: option: add Fibocom FM101-GL variants
Update the USB serial option driver support for the Fibocom
FM101-GL Cat.6
LTE modules as there are actually several different variants.
- VID:PID 2cb7:01a2, FM101-GL are laptop M.2 cards (with
MBIM interfaces for /Linux/Chrome OS)
- VID:PID 2cb7:01a4, FM101-GL for laptop debug M.2 cards(with adb
interface for /Linux/Chrome OS)
0x01a2: mbim, tty, tty, diag, gnss
0x01a4: mbim, diag, tty, adb, gnss, gnss
Here are the outputs of lsusb -v and usb-devices:
T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 86 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
P: Vendor=2cb7 ProdID=01a2 Rev= 5.04
S: Manufacturer=Fibocom Wireless Inc.
S: Product=Fibocom FM101-GL Module
S: SerialNumber=
673326ce
C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=(none)
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=(none)
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none)
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=(none)
Bus 002 Device 084: ID 2cb7:01a2 Fibocom Wireless Inc. Fibocom FM101-GL Module
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.20
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 9
idVendor 0x2cb7
idProduct 0x01a2
bcdDevice 5.04
iManufacturer 1 Fibocom Wireless Inc.
iProduct 2 Fibocom FM101-GL Module
iSerial 3
673326ce
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x015d
bNumInterfaces 6
bConfigurationValue 1
iConfiguration 4 MBIM_DUN_DUN_DIAG_NMEA
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 896mA
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 0
bInterfaceCount 2
bFunctionClass 2 Communications
bFunctionSubClass 14
bFunctionProtocol 0
iFunction 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 14
bInterfaceProtocol 0
iInterface 5 Fibocom FM101-GL LTE Modem
CDC Header:
bcdCDC 1.10
CDC Union:
bMasterInterface 0
bSlaveInterface 1
CDC MBIM:
bcdMBIMVersion 1.00
wMaxControlMessage 4096
bNumberFilters 32
bMaxFilterSize 128
wMaxSegmentSize 2048
bmNetworkCapabilities 0x20
8-byte ntb input size
CDC MBIM Extended:
bcdMBIMExtendedVersion 1.00
bMaxOutstandingCommandMessages 64
wMTU 1500
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 9
bMaxBurst 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0
bInterfaceProtocol 2
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0
bInterfaceProtocol 2
iInterface 6 MBIM Data
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x8e EP 14 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 6
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x0f EP 15 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 2
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 64
iInterface 0
** UNRECOGNIZED: 05 24 00 10 01
** UNRECOGNIZED: 05 24 01 00 00
** UNRECOGNIZED: 04 24 02 02
** UNRECOGNIZED: 05 24 06 00 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x000a 1x 10 bytes
bInterval 9
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 64
iInterface 0
** UNRECOGNIZED: 05 24 00 10 01
** UNRECOGNIZED: 05 24 01 00 00
** UNRECOGNIZED: 04 24 02 02
** UNRECOGNIZED: 05 24 06 00 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x000a 1x 10 bytes
bInterval 9
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 4
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 48
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 5
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 64
iInterface 0
** UNRECOGNIZED: 05 24 00 10 01
** UNRECOGNIZED: 05 24 01 00 00
** UNRECOGNIZED: 04 24 02 02
** UNRECOGNIZED: 05 24 06 00 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x000a 1x 10 bytes
bInterval 9
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 85 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
P: Vendor=2cb7 ProdID=01a4 Rev= 5.04
S: Manufacturer=Fibocom Wireless Inc.
S: Product=Fibocom FM101-GL Module
S: SerialNumber=
673326ce
C:* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=896mA
A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none)
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=(none)
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=(none)
I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=(none)
Bus 002 Device 085: ID 2cb7:01a4 Fibocom Wireless Inc. Fibocom FM101-GL Module
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.20
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 9
idVendor 0x2cb7
idProduct 0x01a4
bcdDevice 5.04
iManufacturer 1 Fibocom Wireless Inc.
iProduct 2 Fibocom FM101-GL Module
iSerial 3
673326ce
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0180
bNumInterfaces 7
bConfigurationValue 1
iConfiguration 4 MBIM_DIAG_DUN_ADB_GNSS_GNSS
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 896mA
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 0
bInterfaceCount 2
bFunctionClass 2 Communications
bFunctionSubClass 14
bFunctionProtocol 0
iFunction 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 14
bInterfaceProtocol 0
iInterface 5 Fibocom FM101-GL LTE Modem
CDC Header:
bcdCDC 1.10
CDC Union:
bMasterInterface 0
bSlaveInterface 1
CDC MBIM:
bcdMBIMVersion 1.00
wMaxControlMessage 4096
bNumberFilters 32
bMaxFilterSize 128
wMaxSegmentSize 2048
bmNetworkCapabilities 0x20
8-byte ntb input size
CDC MBIM Extended:
bcdMBIMExtendedVersion 1.00
bMaxOutstandingCommandMessages 64
wMTU 1500
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 9
bMaxBurst 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0
bInterfaceProtocol 2
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0
bInterfaceProtocol 2
iInterface 6 MBIM Data
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x8e EP 14 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 6
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x0f EP 15 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 2
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 48
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 64
iInterface 0
** UNRECOGNIZED: 05 24 00 10 01
** UNRECOGNIZED: 05 24 01 00 00
** UNRECOGNIZED: 04 24 02 02
** UNRECOGNIZED: 05 24 06 00 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x000a 1x 10 bytes
bInterval 9
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 4
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 66
bInterfaceProtocol 1
iInterface 8 ADB Interface
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 5
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 64
iInterface 0
** UNRECOGNIZED: 05 24 00 10 01
** UNRECOGNIZED: 05 24 01 00 00
** UNRECOGNIZED: 04 24 02 02
** UNRECOGNIZED: 05 24 06 00 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x000a 1x 10 bytes
bInterval 9
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 6
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 64
iInterface 0
** UNRECOGNIZED: 05 24 00 10 01
** UNRECOGNIZED: 05 24 01 00 00
** UNRECOGNIZED: 04 24 02 02
** UNRECOGNIZED: 05 24 06 00 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x89 EP 9 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x000a 1x 10 bytes
bInterval 9
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x05 EP 5 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Signed-off-by: Mingjie Zhang <superzmj@fibocom.com>
Link: https://lore.kernel.org/r/20211123133757.37475-1-superzmj@fibocom.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Linus Torvalds [Wed, 24 Nov 2021 17:55:24 +0000 (09:55 -0800)]
Merge tag 'for-5.16/parisc-5' of git://git./linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
"Increase the FRAME_WARN value to avoid some new warnings which showed
up in the Linux kernel test project, revert a patch which moved the
_stext symbol and thus tiggered errors in the hardened usercopy
checks, and introduce an extru_safe() assembler macro to overcome
possible unsafe usage of the extru asm statement on 64-bit PA2.0
machines"
* tag 'for-5.16/parisc-5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
Revert "parisc: Fix backtrace to always include init funtion names"
parisc: Convert PTE lookup to use extru_safe() macro
parisc: Fix extraction of hash lock bits in syscall.S
parisc: Provide an extru_safe() macro to extract unsigned bits
parisc: Increase FRAME_WARN to 2048 bytes on parisc
Linus Torvalds [Wed, 24 Nov 2021 17:51:22 +0000 (09:51 -0800)]
Merge tag 'trace-v5.16-rc2' of git://git./linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Fix wrong uprobe variable in iterator
uprobe_perf_open() processes a list of probes, but due to a missing
setting of the uprobe to be processed, the loop processes the head
probe instead of the added probes"
* tag 'trace-v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/uprobe: Fix uprobe_perf_open probes iteration
Linus Torvalds [Wed, 24 Nov 2021 17:44:13 +0000 (09:44 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- fix for Intel-ISH driver to make sure it gets aoutoloaded only on
matching devices and not universally (Thomas Weißschuh)
- fix for Wacom driver reporting invalid contact under certain
circumstances (Jason Gerecke)
- probing fix for ft260 dirver (Michael Zaidman)
- fix for generic keycode remapping (Thomas Weißschuh)
- fix for division by zero in hid-magicmouse (Claudia Pellegrino)
- other tiny assorted fixes and new device IDs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: multitouch: Fix Iiyama ProLite T1931SAW (0eef:0001 again!)
HID: nintendo: eliminate dead datastructures in !CONFIG_NINTENDO_FF case
HID: magicmouse: prevent division by 0 on scroll
HID: thrustmaster: fix sparse warnings
HID: Ignore battery for Elan touchscreen on HP Envy X360 15-eu0xxx
HID: input: set usage type to key on keycode remap
HID: input: Fix parsing of HID_CP_CONSUMER_CONTROL fields
HID: ft260: fix i2c probing for hwmon devices
Revert "HID: hid-asus.c: Maps key 0x35 (display off) to KEY_SCREENLOCK"
HID: intel-ish-hid: fix module device-id handling
mod_devicetable: fix kdocs for ishtp_device_id
HID: wacom: Use "Confidence" flag to prevent reporting invalid contacts
HID: nintendo: unlock on error in joycon_leds_create()
platform/x86: isthp_eclite: only load for matching devices
platform/chrome: chros_ec_ishtp: only load for matching devices
HID: intel-ish-hid: hid-client: only load for matching devices
HID: intel-ish-hid: fw-loader: only load for matching devices
HID: intel-ish-hid: use constants for modaliases
HID: intel-ish-hid: add support for MODULE_DEVICE_TABLE()
Stefano Stabellini [Tue, 23 Nov 2021 21:07:48 +0000 (13:07 -0800)]
xen: detect uninitialized xenbus in xenbus_init
If the xenstore page hasn't been allocated properly, reading the value
of the related hvm_param (HVM_PARAM_STORE_PFN) won't actually return
error. Instead, it will succeed and return zero. Instead of attempting
to xen_remap a bad guest physical address, detect this condition and
return early.
Note that although a guest physical address of zero for
HVM_PARAM_STORE_PFN is theoretically possible, it is not a good choice
and zero has never been validly used in that capacity.
Also recognize all bits set as an invalid value.
For 32-bit Linux, any pfn above ULONG_MAX would get truncated. Pfns
above ULONG_MAX should never be passed by the Xen tools to HVM guests
anyway, so check for this condition and return early.
Cc: stable@vger.kernel.org
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Link: https://lore.kernel.org/r/20211123210748.1910236-1-sstabellini@kernel.org
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Tejas Upadhyay [Wed, 17 Nov 2021 06:03:21 +0000 (11:33 +0530)]
drm/i915/gt: Hold RPM wakelock during PXP suspend
selftest --r live shows failure in suspend tests when
RPM wakelock is not acquired during suspend.
This changes addresses below error :
<4> [154.177535] RPM wakelock ref not held during HW access
<4> [154.177575] WARNING: CPU: 4 PID: 5772 at
drivers/gpu/drm/i915/intel_runtime_pm.h:113
fwtable_write32+0x240/0x320 [i915]
<4> [154.177974] Modules linked in: i915(+) vgem drm_shmem_helper
fuse snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic
ledtrig_audio mei_hdcp mei_pxp x86_pkg_temp_thermal coretemp
crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_intel_dspcfg
snd_hda_codec snd_hwdep igc snd_hda_core ttm mei_me ptp
snd_pcm prime_numbers mei i2c_i801 pps_core i2c_smbus intel_lpss_pci
btusb btrtl btbcm btintel bluetooth ecdh_generic ecc [last unloaded: i915]
<4> [154.178143] CPU: 4 PID: 5772 Comm: i915_selftest Tainted: G
U 5.15.0-rc6-CI-Patchwork_21432+ #1
<4> [154.178154] Hardware name: ASUS System Product Name/TUF GAMING
Z590-PLUS WIFI, BIOS 0811 04/06/2021
<4> [154.178160] RIP: 0010:fwtable_write32+0x240/0x320 [i915]
<4> [154.178604] Code: 15 7b e1 0f 0b e9 34 fe ff ff 80 3d a9 89 31
00 00 0f 85 31 fe ff ff 48 c7 c7 88 9e 4f a0 c6 05 95 89 31 00 01 e8
c0 15 7b e1 <0f> 0b e9 17 fe ff ff 8b 05 0f 83 58 e2 85 c0 0f 85 8d
00 00 00 48
<4> [154.178614] RSP: 0018:
ffffc900016279f0 EFLAGS:
00010286
<4> [154.178626] RAX:
0000000000000000 RBX:
ffff888204fe0ee0
RCX:
0000000000000001
<4> [154.178634] RDX:
0000000080000001 RSI:
ffffffff823142b5
RDI:
00000000ffffffff
<4> [154.178641] RBP:
00000000000320f0 R08:
0000000000000000
R09:
c0000000ffffcd5a
<4> [154.178647] R10:
00000000000f8c90 R11:
ffffc90001627808
R12:
0000000000000000
<4> [154.178654] R13:
0000000040000000 R14:
ffffffffa04d12e0
R15:
0000000000000000
<4> [154.178660] FS:
00007f7390aa4c00(0000) GS:
ffff88844f000000(0000)
knlGS:
0000000000000000
<4> [154.178669] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
<4> [154.178675] CR2:
000055bc40595028 CR3:
0000000204474005
CR4:
0000000000770ee0
<4> [154.178682] PKRU:
55555554
<4> [154.178687] Call Trace:
<4> [154.178706] intel_pxp_fini_hw+0x23/0x30 [i915]
<4> [154.179284] intel_pxp_suspend+0x1f/0x30 [i915]
<4> [154.179807] live_gt_resume+0x5b/0x90 [i915]
Changes since V2 :
- Remove boolean in intel_pxp_runtime_preapre for
non-pxp configs. Solves build error
Changes since V2 :
- Open-code intel_pxp_runtime_suspend - Daniele
- Remove boolean in intel_pxp_runtime_preapre - Daniele
Changes since V1 :
- split the HW access parts in gt_suspend_late - Daniele
- Remove default PXP configs
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Fixes: 0cfab4cb3c4e ("drm/i915/pxp: Enable PXP power management")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211117060321.3729343-1-tejaskumarx.surendrakumar.upadhyay@intel.com
(cherry picked from commit
d22d446f7a1ccd0db8c138749dde601388b2327d)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Mark Rutland [Mon, 22 Nov 2021 12:58:20 +0000 (12:58 +0000)]
arm64: uaccess: avoid blocking within critical sections
As Vincent reports in:
https://lore.kernel.org/r/
20211118163417.21617-1-vincent.whitchurch@axis.com
The put_user() in schedule_tail() can get stuck in a livelock, similar
to a problem recently fixed on riscv in commit:
285a76bb2cf51b0c ("riscv: evaluate put_user() arg before enabling user access")
In __raw_put_user() we have a critical section between
uaccess_ttbr0_enable() and uaccess_ttbr0_disable() where we cannot
safely call into the scheduler without having taken an exception, as
schedule() and other scheduling functions will not save/restore the
TTBR0 state. If either of the `x` or `ptr` arguments to __raw_put_user()
contain a blocking call, we may call into the scheduler within the
critical section. This can result in two problems:
1) The access within the critical section will occur without the
required TTBR0 tables installed. This will fault, and where the
required tables permit access, the access will be retried without the
required tables, resulting in a livelock.
2) When TTBR0 SW PAN is in use, check_and_switch_context() does not
modify TTBR0, leaving a stale value installed. The mappings of the
blocked task will erroneously be accessible to regular accesses in
the context of the new task. Additionally, if the tables are
subsequently freed, local TLB maintenance required to reuse the ASID
may be lost, potentially resulting in TLB corruption (e.g. in the
presence of CnP).
The same issue exists for __raw_get_user() in the critical section
between uaccess_ttbr0_enable() and uaccess_ttbr0_disable().
A similar issue exists for __get_kernel_nofault() and
__put_kernel_nofault() for the critical section between
__uaccess_enable_tco_async() and __uaccess_disable_tco_async(), as the
TCO state is not context-switched by direct calls into the scheduler.
Here the TCO state may be lost from the context of the current task,
resulting in unexpected asynchronous tag check faults. It may also be
leaked to another task, suppressing expected tag check faults.
To fix all of these cases, we must ensure that we do not directly call
into the scheduler in their respective critical sections. This patch
reworks __raw_put_user(), __raw_get_user(), __get_kernel_nofault(), and
__put_kernel_nofault(), ensuring that parameters are evaluated outside
of the critical sections. To make this requirement clear, comments are
added describing the problem, and line spaces added to separate the
critical sections from other portions of the macros.
For __raw_get_user() and __raw_put_user() the `err` parameter is
conditionally assigned to, and we must currently evaluate this in the
critical section. This behaviour is relied upon by the signal code,
which uses chains of put_user_error() and get_user_error(), checking the
return value at the end. In all cases, the `err` parameter is a plain
int rather than a more complex expression with a blocking call, so this
is safe.
In future we should try to clean up the `err` usage to remove the
potential for this to be a problem.
Aside from the changes to time of evaluation, there should be no
functional change as a result of this patch.
Reported-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20211118163417.21617-1-vincent.whitchurch@axis.com
Fixes: f253d827f33c ("arm64: uaccess: refactor __{get,put}_user")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20211122125820.55286-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Jiri Olsa [Tue, 23 Nov 2021 14:28:01 +0000 (15:28 +0100)]
tracing/uprobe: Fix uprobe_perf_open probes iteration
Add missing 'tu' variable initialization in the probes loop,
otherwise the head 'tu' is used instead of added probes.
Link: https://lkml.kernel.org/r/20211123142801.182530-1-jolsa@kernel.org
Cc: stable@vger.kernel.org
Fixes: 99c9a923e97a ("tracing/uprobe: Fix double perf_event linking on multiprobe uprobe")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Linus Torvalds [Tue, 23 Nov 2021 21:59:54 +0000 (13:59 -0800)]
Merge tag 'selinux-pr-
20211123' of git://git./linux/kernel/git/pcmoore/selinux
Pull SELinux fix from Paul Moore:
"A fix to make sure things are handled correctly when an allocation
fails"
* tag 'selinux-pr-
20211123' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: fix NULL-pointer dereference when hashtab allocation fails
Juergen Gross [Fri, 22 Oct 2021 06:48:00 +0000 (08:48 +0200)]
xen: flag xen_snd_front to be not essential for system boot
The Xen pv sound driver is not essential for booting. Set the respective
flag.
[boris: replace semicolon with comma]
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20211022064800.14978-6-jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Juergen Gross [Fri, 22 Oct 2021 06:47:59 +0000 (08:47 +0200)]
xen: flag pvcalls-front to be not essential for system boot
The Xen pvcalls device is not essential for booting. Set the respective
flag.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20211022064800.14978-5-jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Juergen Gross [Fri, 22 Oct 2021 06:47:58 +0000 (08:47 +0200)]
xen: flag hvc_xen to be not essential for system boot
The Xen pv console driver is not essential for boot. Set the respective
flag.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20211022064800.14978-4-jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Juergen Gross [Fri, 22 Oct 2021 06:47:57 +0000 (08:47 +0200)]
xen: flag xen_drm_front to be not essential for system boot
Similar to the virtual frame buffer (vfb) the pv display driver is not
essential for booting the system. Set the respective flag.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20211022064800.14978-3-jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Juergen Gross [Fri, 22 Oct 2021 06:47:56 +0000 (08:47 +0200)]
xen: add "not_essential" flag to struct xenbus_driver
When booting the xenbus driver will wait for PV devices to have
connected to their backends before continuing. The timeout is different
between essential and non-essential devices.
Non-essential devices are identified by their nodenames directly in the
xenbus driver, which requires to update this list in case a new device
type being non-essential is added (this was missed for several types
in the past).
In order to avoid this problem, add a "not_essential" flag to struct
xenbus_driver which can be set to "true" by the respective frontend.
Set this flag for the frontends currently regarded to be not essential
(vkbs and vfb) and use it for testing in the xenbus driver.
Signed-off-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20211022064800.14978-2-jgross@suse.com
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Mohammed Gamal [Fri, 19 Nov 2021 11:29:00 +0000 (12:29 +0100)]
drm/hyperv: Fix device removal on Gen1 VMs
The Hyper-V DRM driver tries to free MMIO region on removing
the device regardless of VM type, while Gen1 VMs don't use MMIO
and hence causing the kernel to crash on a NULL pointer dereference.
Fix this by making deallocating MMIO only on Gen2 machines and implement
removal for Gen1
Fixes: 76c56a5affeb ("drm/hyperv: Add DRM driver for hyperv synthetic video device")
Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
Reviewed-by: Deepak Rawat <drawat.floss@gmail.com>
Signed-off-by: Deepak Rawat <drawat.floss@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211119112900.300537-1-mgamal@redhat.com
Linus Torvalds [Tue, 23 Nov 2021 17:10:08 +0000 (09:10 -0800)]
Merge tag 'sound-5.16-rc3' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A lot of small changes at this time.
There are many ASoC fixes, and the majority of them are new machine
quirks for Intel platforms, as well as the device-specific fixes for
Mediatek and Qualcomm.
In addition, a regression fix for USB-audio and a few more HD- and
USB-audio quirks are found here"
* tag 'sound-5.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (41 commits)
ALSA: intel-dsp-config: add quirk for JSL devices based on ES8336 codec
ALSA: usb-audio: Don't start stream for capture at prepare
ALSA: usb-audio: Switch back to non-latency mode at a later point
ALSA: ctxfi: Fix out-of-range access
ALSA: hda/realtek: Fix LED on HP ProBook 435 G7
ASoC: stm32: i2s: fix 32 bits channel length without mclk
ASoC: codecs: lpass-rx-macro: fix HPHR setting CLSH mask
ASoC: codecs: wcd934x: return error code correctly from hw_params
ASoC: codecs: wcd938x: fix volatile register range
ASoC: topology: Add missing rwsem around snd_ctl_remove() calls
ASoC: qdsp6: q6routing: validate port id before setting up route
ASoC: qdsp6: q6adm: improve error reporting
ASoC: qdsp6: q6asm: fix q6asm_dai_prepare error handling
ASoC: qdsp6: q6routing: Conditionally reset FrontEnd Mixer
ASoC: qdsp6: qdsp6: q6prm: handle clk disable correctly
ASoC: wm_adsp: wm_adsp_control_add() error: uninitialized symbol 'ret'
ALSA: cmipci: Drop stale variable assignment
ALSA: hda/realtek: Add quirk for ASRock NUC Box 1100
ASoC: rsnd: fixup DMAEngine API
ASoC: SOF: build compression interface into snd_sof.ko
...
Klaus Jensen [Wed, 10 Nov 2021 09:19:06 +0000 (10:19 +0100)]
nvme: fix write zeroes pi
Write Zeroes sets PRACT when block integrity is enabled (as it should),
but neglects to also set the reftag which is expected by reads. This
causes protection errors on reads.
Fix this by setting the reftag for type 1 and 2 (for type 3, reads will
not check the reftag).
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Maurizio Lombardi [Fri, 12 Nov 2021 14:16:12 +0000 (15:16 +0100)]
nvme-fabrics: ignore invalid fast_io_fail_tmo values
Valid fast_io_fail_tmo values are integers >= 0 or -1 (disabled).
Prevent userspace from setting arbitrary negative values.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Enzo Matsumiya [Sat, 6 Nov 2021 02:08:57 +0000 (23:08 -0300)]
nvme-pci: add NO APST quirk for Kioxia device
This particular Kioxia device times out and aborts I/O during any load,
but it's more easily observable with discards (fstrim).
The device gets to a state that is also not possible to use
"nvme set-feature" to disable APST.
Booting with nvme_core.default_ps_max_latency=0 solves the issue.
We had a dozen or so of these devices behaving this same way in
customer environments.
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Maurizio Lombardi [Wed, 3 Nov 2021 08:18:17 +0000 (09:18 +0100)]
nvme-tcp: fix memory leak when freeing a queue
Release the page frag cache when tearing down the io queues
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Varun Prakash [Tue, 23 Nov 2021 10:58:56 +0000 (16:28 +0530)]
nvme-tcp: validate R2T PDU in nvme_tcp_handle_r2t()
If maxh2cdata < r2t_length then driver will form multiple
H2CData PDUs, validate R2T PDU in nvme_tcp_handle_r2t() to
reuse nvme_tcp_setup_h2c_data_pdu().
Also set req->state to NVME_TCP_SEND_H2C_PDU in
nvme_tcp_setup_h2c_data_pdu().
Signed-off-by: Varun Prakash <varun@chelsio.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Varun Prakash [Mon, 22 Nov 2021 10:08:41 +0000 (15:38 +0530)]
nvmet-tcp: fix incomplete data digest send
Current nvmet_try_send_ddgst() code does not check whether
all data digest bytes are transmitted, fix this by returning
-EAGAIN if all data digest bytes are not transmitted.
Fixes: 872d26a391da ("nvmet-tcp: add NVMe over TCP target driver")
Signed-off-by: Varun Prakash <varun@chelsio.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Maurizio Lombardi [Tue, 16 Nov 2021 15:49:20 +0000 (16:49 +0100)]
nvmet-tcp: fix memory leak when performing a controller reset
If a reset controller is executed while the initiator
is performing some I/O the driver may leak the memory allocated
for the commands' iovec.
Make sure that nvmet_tcp_uninit_data_in_cmds() releases
all the memory.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Maurizio Lombardi [Tue, 16 Nov 2021 15:49:19 +0000 (16:49 +0100)]
nvmet-tcp: add an helper to free the cmd buffers
Makes the code easier to read and to debug.
Sets the freed pointers to NULL, it will be useful
when destroying the queues to understand if the commands'
buffers have been released already or not.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Maurizio Lombardi [Tue, 16 Nov 2021 15:49:18 +0000 (16:49 +0100)]
nvmet-tcp: fix a race condition between release_queue and io_work
If the initiator executes a reset controller operation while
performing I/O, the target kernel will crash because of a race condition
between release_queue and io_work;
nvmet_tcp_uninit_data_in_cmds() may be executed while io_work
is running, calling flush_work() was not sufficient to
prevent this because io_work could requeue itself.
Fix this bug by using cancel_work_sync() to prevent io_work
from requeuing itself and set rcv_state to NVMET_TCP_RECV_ERR to
make sure we don't receive any more data from the socket.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Steve French [Tue, 23 Nov 2021 00:37:37 +0000 (18:37 -0600)]
cifs: update internal version number
To 2.34
Signed-off-by: Steve French <stfrench@microsoft.com>
Steve French [Tue, 23 Nov 2021 00:31:03 +0000 (18:31 -0600)]
smb2: clarify rc initialization in smb2_reconnect
It is clearer to initialize rc at the beginning of the function.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Shyam Prasad N [Fri, 19 Nov 2021 13:04:11 +0000 (13:04 +0000)]
cifs: populate server_hostname for extra channels
Recently, a new field got added to the smb3_fs_context struct
named server_hostname. While creating extra channels, pick up
this field from primary channel.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Shyam Prasad N [Sun, 21 Nov 2021 16:45:44 +0000 (16:45 +0000)]
cifs: nosharesock should be set on new server
Recent fix to maintain a nosharesock state on the
server struct caused a regression. It updated this
field in the old tcp session, and not the new one.
This caused the multichannel scenario to misbehave.
Fixes: c9f1c19cf7c5 (cifs: nosharesock should not share socket with future sessions)
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Hector Martin [Sat, 20 Nov 2021 03:07:17 +0000 (12:07 +0900)]
usb: typec: tipd: Fix initialization sequence for cd321x
The power state switch needs to happen first, as that
kickstarts the firmware into normal mode.
Fixes: c9c14be664cf ("usb: typec: tipd: Switch CD321X power state to S0")
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20211120030717.84287-3-marcan@marcan.st
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hector Martin [Sat, 20 Nov 2021 03:07:16 +0000 (12:07 +0900)]
usb: typec: tipd: Fix typo in cd321x_switch_power_state
SPSS should've been SSPS.
Fixes: c9c14be664cf ("usb: typec: tipd: Switch CD321X power state to S0")
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20211120030717.84287-2-marcan@marcan.st
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mathias Nyman [Tue, 23 Nov 2021 10:16:56 +0000 (12:16 +0200)]
usb: hub: Fix locking issues with address0_mutex
Fix the circular lock dependency and unbalanced unlock of addess0_mutex
introduced when fixing an address0_mutex enumeration retry race in commit
ae6dc22d2d1 ("usb: hub: Fix usb enumeration issue due to address0 race")
Make sure locking order between port_dev->status_lock and address0_mutex
is correct, and that address0_mutex is not unlocked in hub_port_connect
"done:" codepath which may be reached without locking address0_mutex
Fixes: 6ae6dc22d2d1 ("usb: hub: Fix usb enumeration issue due to address0 race")
Cc: <stable@vger.kernel.org>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20211123101656.1113518-1-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miquel Raynal [Mon, 15 Nov 2021 11:08:18 +0000 (12:08 +0100)]
docs: i2c: smbus-protocol: mention the repeated start condition
Sr is a repeated start, it is used in both I2C and SMBus protocols.
Provide its description and replace start ("S") conditions with repeated
start ("Sr") conditions when relevant. This allows the documentation to
match the SMBus specification available at [1].
[1] http://www.smbus.org/specs/SMBus_3_1_20180319.pdf
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Jon Hunter [Mon, 15 Nov 2021 11:38:13 +0000 (11:38 +0000)]
mmc: spi: Add device-tree SPI IDs
Commit
5fa6863ba692 ("spi: Check we have a spi_device_id for each DT
compatible") added a test to check that every SPI driver has a
spi_device_id for each DT compatiable string defined by the driver
and warns if the spi_device_id is missing. The spi_device_id is
missing for the MMC SPI driver and the following warning is now seen.
WARNING KERN SPI driver mmc_spi has no spi_device_id for mmc-spi-slot
Fix this by adding the necessary spi_device_id.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20211115113813.238044-1-jonathanh@nvidia.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Vincent Whitchurch [Thu, 11 Nov 2021 16:04:11 +0000 (17:04 +0100)]
i2c: virtio: disable timeout handling
If a timeout is hit, it can result is incorrect data on the I2C bus
and/or memory corruptions in the guest since the device can still be
operating on the buffers it was given while the guest has freed them.
Here is, for example, the start of a slub_debug splat which was
triggered on the next transfer after one transfer was forced to timeout
by setting a breakpoint in the backend (rust-vmm/vhost-device):
BUG kmalloc-1k (Not tainted): Poison overwritten
First byte 0x1 instead of 0x6b
Allocated in virtio_i2c_xfer+0x65/0x35c age=350 cpu=0 pid=29
__kmalloc+0xc2/0x1c9
virtio_i2c_xfer+0x65/0x35c
__i2c_transfer+0x429/0x57d
i2c_transfer+0x115/0x134
i2cdev_ioctl_rdwr+0x16a/0x1de
i2cdev_ioctl+0x247/0x2ed
vfs_ioctl+0x21/0x30
sys_ioctl+0xb18/0xb41
Freed in virtio_i2c_xfer+0x32e/0x35c age=244 cpu=0 pid=29
kfree+0x1bd/0x1cc
virtio_i2c_xfer+0x32e/0x35c
__i2c_transfer+0x429/0x57d
i2c_transfer+0x115/0x134
i2cdev_ioctl_rdwr+0x16a/0x1de
i2cdev_ioctl+0x247/0x2ed
vfs_ioctl+0x21/0x30
sys_ioctl+0xb18/0xb41
There is no simple fix for this (the driver would have to always create
bounce buffers and hold on to them until the device eventually returns
the buffers), so just disable the timeout support for now.
Fixes: 3cfc88380413d20f ("i2c: virtio: add a virtio i2c frontend driver")
Acked-by: Jie Deng <jie.deng@intel.com>
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Johan Hovold [Tue, 23 Nov 2021 09:10:17 +0000 (10:10 +0100)]
USB: serial: pl2303: fix GC type detection
At least some PL2303GC have a bcdDevice of 0x105 instead of 0x100 as the
datasheet claims. Add it to the list of known release numbers for the
HXN (G) type.
Note the chip type could only be determined indirectly based on its
package being of QFP type, which appears to only be available for
PL2303GC.
Fixes: 894758d0571d ("USB: serial: pl2303: tighten type HXN (G) detection")
Cc: stable@vger.kernel.org # 5.13
Reported-by: Anton Lundin <glance@acc.umu.se>
Link: https://lore.kernel.org/r/20211123071613.GZ108031@montezuma.acc.umu.se
Link: https://lore.kernel.org/r/20211123091017.30708-1-johan@kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Jarkko Nikula [Wed, 17 Nov 2021 09:45:09 +0000 (11:45 +0200)]
i2c: i801: Fix interrupt storm from SMB_ALERT signal
Currently interrupt storm will occur from i2c-i801 after first
transaction if SMB_ALERT signal is enabled and ever asserted. It is
enough if the signal is asserted once even before the driver is loaded
and does not recover because that interrupt is not acknowledged.
This fix aims to fix it by two ways:
- Add acknowledging for the SMB_ALERT interrupt status
- Disable the SMB_ALERT interrupt on platforms where possible since the
driver currently does not make use for it
Acknowledging resets the SMB_ALERT interrupt status on all platforms and
also should help to avoid interrupt storm on older platforms where the
SMB_ALERT interrupt disabling is not available.
For simplicity this fix reuses the host notify feature for disabling and
restoring original register value.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=177311
Reported-by: ck+kernelbugzilla@bl4ckb0x.de
Reported-by: stephane.poignant@protonmail.com
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Tested-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Jean Delvare [Tue, 9 Nov 2021 15:02:57 +0000 (16:02 +0100)]
i2c: i801: Restore INTREN on unload
If driver interrupts are enabled, SMBHSTCNT_INTREN will be 1 after
the first transaction, and will stay to that value forever. This
means that interrupts will be generated for both host-initiated
transactions and also SMBus Alert events even after the driver is
unloaded. To be on the safe side, we should restore the initial state
of this bit at suspend and reboot time, as we do for several other
configuration bits already and for the same reason: the BIOS should
be handed the device in the same configuration state in which we
received it. Otherwise interrupts may be generated which nobody
will process.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Abel Vesa [Wed, 10 Nov 2021 17:46:44 +0000 (19:46 +0200)]
dt-bindings: i2c: imx-lpi2c: Fix i.MX 8QM compatible matching
The i.MX 8QM DTS files use two compatibles, so update the binding to fix
dtbs_check warnings like:
arch/arm64/boot/dts/freescale/imx8qm-mek.dt.yaml: i2c@
5a800000:
compatible: ['fsl,imx8qm-lpi2c', 'fsl,imx7ulp-lpi2c'] is too long
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Pavel Begunkov [Tue, 23 Nov 2021 01:45:35 +0000 (01:45 +0000)]
io_uring: correct link-list traversal locking
As io_remove_next_linked() is now under ->timeout_lock (see
io_link_timeout_fn), we should update locking around io_for_each_link()
and io_match_task() to use the new lock.
Cc: stable@kernel.org # 5.15+
Fixes: 89850fce16a1a ("io_uring: run timeouts from task_work")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/b54541cedf7de59cb5ae36109e58529ca16e66aa.1637631883.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ming Lei [Thu, 11 Nov 2021 02:03:43 +0000 (10:03 +0800)]
block: avoid to touch unloaded module instance when opening bdev
disk->fops->owner is grabbed in blkdev_get_no_open() after the disk
kobject refcount is increased. This way can't make sure that
disk->fops->owner is still alive since del_gendisk() still can move
on if the kobject refcount of disk is grabbed by open() and
disk->fops->open() isn't called yet.
Fixes the issue by moving try_module_get() into blkdev_get_by_dev()
with ->open_mutex() held, then we can drain the in-progress open()
in del_gendisk(). Meantime new open() won't succeed because disk
becomes not alive.
This way is reasonable because blkdev_get_no_open() needn't to touch
disk->fops or defined callbacks.
Cc: Christoph Hellwig <hch@lst.de>
Cc: czhong@redhat.com
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211111020343.316126-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Mon, 22 Nov 2021 22:58:57 +0000 (14:58 -0800)]
Merge tag 'media/v5.16-2' of git://git./linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- fix VIDIOC_DQEVENT ioctl handling for 32-bit userspace with a 64-bit
kernel
- regression fix for videobuf2 core
- fix for CEC core when handling non-block transmit
- hi846: fix a clang warning
* tag 'media/v5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: hi846: remove the of_match_ptr macro
media: hi846: include property.h instead of of_graph.h
media: cec: copy sequence field for the reply
media: videobuf2-dma-sg: Fix buf->vb NULL pointer dereference
media: v4l2-core: fix VIDIOC_DQEVENT handling on non-x86
Nadav Amit [Sun, 21 Nov 2021 20:40:08 +0000 (12:40 -0800)]
hugetlbfs: flush before unlock on move_hugetlb_page_tables()
We must flush the TLB before releasing i_mmap_rwsem to avoid the
potential reuse of an unshared PMDs page. This is not true in the case
of move_hugetlb_page_tables(). The last reference on the page table can
therefore be dropped before the TLB flush took place.
Prevent it by reordering the operations and flushing the TLB before
releasing i_mmap_rwsem.
Fixes: 550a7d60bd5e ("mm, hugepages: add mremap() support for hugepage backed vma")
Signed-off-by: Nadav Amit <namit@vmware.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nadav Amit [Sun, 21 Nov 2021 20:40:07 +0000 (12:40 -0800)]
hugetlbfs: flush TLBs correctly after huge_pmd_unshare
When __unmap_hugepage_range() calls to huge_pmd_unshare() succeed, a TLB
flush is missing. This TLB flush must be performed before releasing the
i_mmap_rwsem, in order to prevent an unshared PMDs page from being
released and reused before the TLB flush took place.
Arguably, a comprehensive solution would use mmu_gather interface to
batch the TLB flushes and the PMDs page release, however it is not an
easy solution: (1) try_to_unmap_one() and try_to_migrate_one() also call
huge_pmd_unshare() and they cannot use the mmu_gather interface; and (2)
deferring the release of the page reference for the PMDs page until
after i_mmap_rwsem is dropeed can confuse huge_pmd_unshare() into
thinking PMDs are shared when they are not.
Fix __unmap_hugepage_range() by adding the missing TLB flush, and
forcing a flush when unshare is successful.
Fixes: 24669e58477e ("hugetlb: use mmu_gather instead of a temporary linked list for accumulating pages)" # 3.6
Signed-off-by: Nadav Amit <namit@vmware.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sugaya Taichi [Mon, 15 Nov 2021 09:30:56 +0000 (18:30 +0900)]
MAINTAINERS: Add entry to MAINTAINERS for Milbeaut
Add entry to MAINTAINERS for Milbeaut that supported minimal drivers.
Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>
Link: https://lore.kernel.org/r/1636968656-14033-5-git-send-email-sugaya.taichi@socionext.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Michael Kelley [Fri, 19 Nov 2021 23:39:01 +0000 (15:39 -0800)]
firmware: smccc: Fix check for ARCH_SOC_ID not implemented
The ARCH_FEATURES function ID is a 32-bit SMC call, which returns
a 32-bit result per the SMCCC spec. Current code is doing a 64-bit
comparison against -1 (SMCCC_RET_NOT_SUPPORTED) to detect that the
feature is unimplemented. That check doesn't work in a Hyper-V VM,
where the upper 32-bits are zero as allowed by the spec.
Cast the result as an 'int' so the comparison works. The change also
makes the code consistent with other similar checks in this file.
Fixes: 821b67fa4639 ("firmware: smccc: Add ARCH_SOC_ID support")
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 22 Nov 2021 10:41:42 +0000 (11:41 +0100)]
Merge tag 'socfpga_fix_for_v5.16' of git://git./linux/kernel/git/dinguyen/linux into arm/fixes
SoCFPGA fix for v5.16
- Fix crash when CONFIG_FORTIRY_SOURCE is enabled
* tag 'socfpga_fix_for_v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: socfpga: Fix crash with CONFIG_FORTIRY_SOURCE
Link: https://lore.kernel.org/r/20211119153224.2761257-1-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 22 Nov 2021 10:39:03 +0000 (11:39 +0100)]
Merge tag 'scmi-fixes-5.16' of git://git./linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm SCMI fixes for v5.16
Couple of fixes for sparse warnings(type error assignment in voltage and
sensor protocols), add proper propagation of error from scmi_pm_domain_probe
handling agent discovery response in base protocol correctly and a fix
to avoid null pointer de-reference in the error path.
* tag 'scmi-fixes-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Fix type error assignment in voltage protocol
firmware: arm_scmi: Fix type error in sensor protocol
firmware: arm_scmi: pm: Propagate return value to caller
firmware: arm_scmi: Fix base agent discover response
firmware: arm_scmi: Fix null de-reference on error path
Link: https://lore.kernel.org/r/20211118121656.4014764-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 22 Nov 2021 10:32:15 +0000 (11:32 +0100)]
Merge tag 'optee-fix-for-v5.16' of git://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes
Fix possible NULL pointer dereference in OP-TEE driver
* tag 'optee-fix-for-v5.16' of git://git.linaro.org/people/jens.wiklander/linux-tee:
optee: fix kfree NULL pointer
Link: https://lore.kernel.org/r/20211117125747.GA2896197@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 22 Nov 2021 09:59:35 +0000 (10:59 +0100)]
Merge tag 'arm-soc/for-5.16/devicetree-fixes' of https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
5.16, please pull the following:
- Florian fixes the BCM5310x DTS include file to have the appropriate
I2C controller interrupt line, and allows the BCMA GPIO controller to
be used as an interrupt controller. Finally, the BCM2711 (Raspberry Pi
4) PCIe Device Tree node interrupts are fixed to list the correct
interrupt output as well as the INTB/C/D lines.
* tag 'arm-soc/for-5.16/devicetree-fixes' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm2711: Fix PCIe interrupts
ARM: dts: BCM5301X: Add interrupt properties to GPIO node
ARM: dts: BCM5301X: Fix I2C controller interrupt
Link: https://lore.kernel.org/r/20211116201429.2692786-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
projects / platform / kernel / linux-starfive.git / log