Jian Zhang [Fri, 6 Oct 2023 02:22:33 +0000 (10:22 +0800)]
i2c: aspeed: Fix i2c bus hang in slave read
commit
54f1840ddee9bbdc8dd89fbbfdfa632401244146 upstream.
When the `CONFIG_I2C_SLAVE` option is enabled and the device operates
as a slave, a situation arises where the master sends a START signal
without the accompanying STOP signal. This action results in a
persistent I2C bus timeout. The core issue stems from the fact that
the i2c controller remains in a slave read state without a timeout
mechanism. As a consequence, the bus perpetually experiences timeouts.
In this case, the i2c bus will be reset, but the slave_state reset is
missing.
Fixes:
fee465150b45 ("i2c: aspeed: Reset the i2c controller when timeout occurs")
Signed-off-by: Jian Zhang <zhangjian.3032@bytedance.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alain Volmat [Tue, 10 Oct 2023 08:44:54 +0000 (10:44 +0200)]
i2c: stm32f7: Fix PEC handling in case of SMBUS transfers
commit
c896ff2dd8f30a6b0a922c83a96f6d43f05f0e92 upstream.
In case of SMBUS byte read with PEC enabled, the whole transfer
is split into two commands. A first write command, followed by
a read command. The write command does not have any PEC byte
and a PEC byte is appended at the end of the read command.
(cf Read byte protocol with PEC in SMBUS specification)
Within the STM32 I2C controller, handling (either sending
or receiving) of the PEC byte is done via the PECBYTE bit in
register CR2.
Currently, the PECBYTE is set at the beginning of a transfer,
which lead to sending a PEC byte at the end of the write command
(hence losing the real last byte), and also does not check the
PEC byte received during the read command.
This patch corrects the function stm32f7_i2c_smbus_xfer_msg
in order to only set the PECBYTE during the read command.
Fixes:
9e48155f6bfe ("i2c: i2c-stm32f7: Add initial SMBus protocols support")
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Herve Codina [Fri, 20 Oct 2023 15:30:12 +0000 (17:30 +0200)]
i2c: muxes: i2c-demux-pinctrl: Use of_get_i2c_adapter_by_node()
commit
0fb118de5003028ad092a4e66fc6d07b86c3bc94 upstream.
i2c-demux-pinctrl uses the pair of_find_i2c_adapter_by_node() /
i2c_put_adapter(). These pair alone is not correct to properly lock the
I2C parent adapter.
Indeed, i2c_put_adapter() decrements the module refcount while
of_find_i2c_adapter_by_node() does not increment it. This leads to an
underflow of the parent module refcount.
Use the dedicated function, of_get_i2c_adapter_by_node(), to handle
correctly the module refcount.
Fixes:
50a5ba876908 ("i2c: mux: demux-pinctrl: add driver")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Cc: stable@vger.kernel.org
Acked-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Herve Codina [Fri, 20 Oct 2023 15:30:13 +0000 (17:30 +0200)]
i2c: muxes: i2c-mux-gpmux: Use of_get_i2c_adapter_by_node()
commit
3dc0ec46f6e7511fc4fdf6b6cda439382bc957f1 upstream.
i2c-mux-gpmux uses the pair of_find_i2c_adapter_by_node() /
i2c_put_adapter(). These pair alone is not correct to properly lock the
I2C parent adapter.
Indeed, i2c_put_adapter() decrements the module refcount while
of_find_i2c_adapter_by_node() does not increment it. This leads to an
underflow of the parent module refcount.
Use the dedicated function, of_get_i2c_adapter_by_node(), to handle
correctly the module refcount.
Fixes:
ac8498f0ce53 ("i2c: i2c-mux-gpmux: new driver")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Cc: stable@vger.kernel.org
Acked-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Herve Codina [Fri, 20 Oct 2023 15:30:11 +0000 (17:30 +0200)]
i2c: muxes: i2c-mux-pinctrl: Use of_get_i2c_adapter_by_node()
commit
3171d37b58a76e1febbf3f4af2d06234a98cf88b upstream.
i2c-mux-pinctrl uses the pair of_find_i2c_adapter_by_node() /
i2c_put_adapter(). These pair alone is not correct to properly lock the
I2C parent adapter.
Indeed, i2c_put_adapter() decrements the module refcount while
of_find_i2c_adapter_by_node() does not increment it. This leads to an
underflow of the parent module refcount.
Use the dedicated function, of_get_i2c_adapter_by_node(), to handle
correctly the module refcount.
Fixes:
c4aee3e1b0de ("i2c: mux: pinctrl: remove platform_data")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Cc: stable@vger.kernel.org
Acked-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Robert Hancock [Fri, 15 Sep 2023 00:10:19 +0000 (18:10 -0600)]
iio: adc: xilinx-xadc: Correct temperature offset/scale for UltraScale
commit
e2bd8c28b9bd835077eb65715d416d667694a80d upstream.
The driver was previously using offset and scale values for the
temperature sensor readings which were only valid for 7-series devices.
Add per-device-type values for offset and scale and set them appropriately
for each device type.
Note that the values used for the UltraScale family are for UltraScale+
(i.e. the SYSMONE4 primitive) using the internal reference, as that seems
to be the most common configuration and the device tree values Xilinx's
device tree generator produces don't seem to give us anything to tell us
which configuration is used. However, the differences within the UltraScale
family seem fairly minor and it's closer than using the 7-series values
instead in any case.
Fixes:
c2b7720a7905 ("iio: xilinx-xadc: Add basic support for Ultrascale System Monitor")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Acked-by: O'Griofa, Conall <conall.ogriofa@amd.com>
Tested-by: O'Griofa, Conall <conall.ogriofa@amd.com>
Link: https://lore.kernel.org/r/20230915001019.2862964-3-robert.hancock@calian.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Robert Hancock [Fri, 15 Sep 2023 00:10:18 +0000 (18:10 -0600)]
iio: adc: xilinx-xadc: Don't clobber preset voltage/temperature thresholds
commit
8d6b3ea4d9eaca80982442b68a292ce50ce0a135 upstream.
In the probe function, the driver was reading out the thresholds already
set in the core, which can be configured by the user in the Vivado tools
when the FPGA image is built. However, it later clobbered those values
with zero or maximum values. In particular, the overtemperature shutdown
threshold register was overwritten with the max value, which effectively
prevents the FPGA from shutting down when the desired threshold was
eached, potentially risking hardware damage in that case.
Remove this code to leave the preconfigured default threshold values
intact.
The code was also disabling all alarms regardless of what enable state
they were left in by the FPGA image, including the overtemperature
shutdown feature. Leave these bits in their original state so they are
not unconditionally disabled.
Fixes:
bdc8cda1d010 ("iio:adc: Add Xilinx XADC driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Acked-by: O'Griofa, Conall <conall.ogriofa@amd.com>
Tested-by: O'Griofa, Conall <conall.ogriofa@amd.com>
Link: https://lore.kernel.org/r/20230915001019.2862964-2-robert.hancock@calian.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marek Szyprowski [Mon, 9 Oct 2023 10:14:12 +0000 (12:14 +0200)]
iio: exynos-adc: request second interupt only when touchscreen mode is used
commit
865b080e3229102f160889328ce2e8e97aa65ea0 upstream.
Second interrupt is needed only when touchscreen mode is used, so don't
request it unconditionally. This removes the following annoying warning
during boot:
exynos-adc
14d10000.adc: error -ENXIO: IRQ index 1 not found
Fixes:
2bb8ad9b44c5 ("iio: exynos-adc: add experimental touchscreen support")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20231009101412.916922-1-m.szyprowski@samsung.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Walleij [Sat, 2 Sep 2023 19:46:20 +0000 (21:46 +0200)]
iio: afe: rescale: Accept only offset channels
commit
bee448390e5166d019e9e037194d487ee94399d9 upstream.
As noted by Jonathan Cameron: it is perfectly legal for a channel
to have an offset but no scale in addition to the raw interface.
The conversion will imply that scale is 1:1.
Make rescale_configure_channel() accept just scale, or just offset
to process a channel.
When a user asks for IIO_CHAN_INFO_OFFSET in rescale_read_raw()
we now have to deal with the fact that OFFSET could be present
but SCALE missing. Add code to simply scale 1:1 in this case.
Link: https://lore.kernel.org/linux-iio/CACRpkdZXBjHU4t-GVOCFxRO-AHGxKnxMeHD2s4Y4PuC29gBq6g@mail.gmail.com/
Fixes:
53ebee949980 ("iio: afe: iio-rescale: Support processed channels")
Fixes:
9decacd8b3a4 ("iio: afe: rescale: Fix boolean logic bug")
Reported-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/20230902-iio-rescale-only-offset-v2-1-988b807754c8@linaro.org
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jens Axboe [Sat, 28 Oct 2023 13:30:27 +0000 (07:30 -0600)]
io_uring/fdinfo: lock SQ thread while retrieving thread cpu/pid
commit
7644b1a1c9a7ae8ab99175989bfc8676055edb46 upstream.
We could race with SQ thread exit, and if we do, we'll hit a NULL pointer
dereference when the thread is cleared. Grab the SQPOLL data lock before
attempting to get the task cpu and pid for fdinfo, this ensures we have a
stable view of it.
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218032
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Haibo Li [Mon, 9 Oct 2023 07:37:48 +0000 (15:37 +0800)]
kasan: print the original fault addr when access invalid shadow
commit
babddbfb7d7d70ae7f10fedd75a45d8ad75fdddf upstream.
when the checked address is illegal,the corresponding shadow address from
kasan_mem_to_shadow may have no mapping in mmu table. Access such shadow
address causes kernel oops. Here is a sample about oops on arm64(VA
39bit) with KASAN_SW_TAGS and KASAN_OUTLINE on:
[
ffffffb80aaaaaaa] pgd=
000000005d3ce003, p4d=
000000005d3ce003,
pud=
000000005d3ce003, pmd=
0000000000000000
Internal error: Oops:
0000000096000006 [#1] PREEMPT SMP
Modules linked in:
CPU: 3 PID: 100 Comm: sh Not tainted 6.6.0-rc1-dirty #43
Hardware name: linux,dummy-virt (DT)
pstate:
80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __hwasan_load8_noabort+0x5c/0x90
lr : do_ib_ob+0xf4/0x110
ffffffb80aaaaaaa is the shadow address for
efffff80aaaaaaaa.
The problem is reading invalid shadow in kasan_check_range.
The generic kasan also has similar oops.
It only reports the shadow address which causes oops but not
the original address.
Commit
2f004eea0fc8("x86/kasan: Print original address on #GP")
introduce to kasan_non_canonical_hook but limit it to KASAN_INLINE.
This patch extends it to KASAN_OUTLINE mode.
Link: https://lkml.kernel.org/r/20231009073748.159228-1-haibo.li@mediatek.com
Fixes:
2f004eea0fc8("x86/kasan: Print original address on #GP")
Signed-off-by: Haibo Li <haibo.li@mediatek.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Haibo Li <haibo.li@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Khazhismel Kumykov [Fri, 20 Oct 2023 22:36:17 +0000 (15:36 -0700)]
blk-throttle: check for overflow in calculate_bytes_allowed
commit
2dd710d476f2f1f6eaca884f625f69ef4389ed40 upstream.
Inexact, we may reject some not-overflowing values incorrectly, but
they'll be on the order of exabytes allowed anyways.
This fixes divide error crash on x86 if bps_limit is not configured or
is set too high in the rare case that jiffy_elapsed is greater than HZ.
Fixes:
e8368b57c006 ("blk-throttle: use calculate_io/bytes_allowed() for throtl_trim_slice()")
Fixes:
8d6bbaada2e0 ("blk-throttle: prevent overflow while calculating wait time")
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20231020223617.2739774-1-khazhy@google.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Damien Le Moal [Wed, 25 Oct 2023 06:46:12 +0000 (15:46 +0900)]
scsi: sd: Introduce manage_shutdown device flag
commit
24eca2dce0f8d19db808c972b0281298d0bafe99 upstream.
Commit
aa3998dbeb3a ("ata: libata-scsi: Disable scsi device
manage_system_start_stop") change setting the manage_system_start_stop
flag to false for libata managed disks to enable libata internal
management of disk suspend/resume. However, a side effect of this change
is that on system shutdown, disks are no longer being stopped (set to
standby mode with the heads unloaded). While this is not a critical
issue, this unclean shutdown is not recommended and shows up with
increased smart counters (e.g. the unexpected power loss counter
"Unexpect_Power_Loss_Ct").
Instead of defining a shutdown driver method for all ATA adapter
drivers (not all of them define that operation), this patch resolves
this issue by further refining the sd driver start/stop control of disks
using the new flag manage_shutdown. If this new flag is set to true by
a low level driver, the function sd_shutdown() will issue a
START STOP UNIT command with the start argument set to 0 when a disk
needs to be powered off (suspended) on system power off, that is, when
system_state is equal to SYSTEM_POWER_OFF.
Similarly to the other manage_xxx flags, the new manage_shutdown flag is
exposed through sysfs as a read-write device attribute.
To avoid any confusion between manage_shutdown and
manage_system_start_stop, the comments describing these flags in
include/scsi/scsi.h are also improved.
Fixes:
aa3998dbeb3a ("ata: libata-scsi: Disable scsi device manage_system_start_stop")
Cc: stable@vger.kernel.org
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218038
Link: https://lore.kernel.org/all/cd397c88-bf53-4768-9ab8-9d107df9e613@gmail.com/
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michal Schmidt [Wed, 25 Oct 2023 18:32:13 +0000 (11:32 -0700)]
iavf: in iavf_down, disable queues when removing the driver
[ Upstream commit
53798666648af3aa0dd512c2380576627237a800 ]
In iavf_down, we're skipping the scheduling of certain operations if
the driver is being removed. However, the IAVF_FLAG_AQ_DISABLE_QUEUES
request must not be skipped in this case, because iavf_close waits
for the transition to the __IAVF_DOWN state, which happens in
iavf_virtchnl_completion after the queues are released.
Without this fix, "rmmod iavf" takes half a second per interface that's
up and prints the "Device resources not yet released" warning.
Fixes:
c8de44b577eb ("iavf: do not process adminq tasks when __IAVF_IN_REMOVE_TASK is set")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Tested-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231025183213.874283-1-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sui Jingfeng [Thu, 8 Jun 2023 02:42:07 +0000 (10:42 +0800)]
drm/logicvc: Kconfig: select REGMAP and REGMAP_MMIO
[ Upstream commit
4e6c38c38723a954b85aa9ee62603bb4a37acbb4 ]
drm/logicvc driver is depend on REGMAP and REGMAP_MMIO, should select this
two kconfig option, otherwise the driver failed to compile on platform
without REGMAP_MMIO selected:
ERROR: modpost: "__devm_regmap_init_mmio_clk" [drivers/gpu/drm/logicvc/logicvc-drm.ko] undefined!
make[1]: *** [scripts/Makefile.modpost:136: Module.symvers] Error 1
make: *** [Makefile:1978: modpost] Error 2
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Fixes:
efeeaefe9be5 ("drm: Add support for the LogiCVC display controller")
Link: https://patchwork.freedesktop.org/patch/msgid/20230608024207.581401-1-suijingfeng@loongson.cn
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ivan Vecera [Mon, 23 Oct 2023 21:27:14 +0000 (14:27 -0700)]
i40e: Fix wrong check for I40E_TXR_FLAGS_WB_ON_ITR
[ Upstream commit
77a8c982ff0d4c3a14022c6fe9e3dbfb327552ec ]
The I40E_TXR_FLAGS_WB_ON_ITR is i40e_ring flag and not i40e_pf one.
Fixes:
8e0764b4d6be42 ("i40e/i40evf: Add support for writeback on ITR feature for X722")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231023212714.178032-1-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pablo Neira Ayuso [Sun, 22 Oct 2023 20:25:18 +0000 (22:25 +0200)]
gtp: fix fragmentation needed check with gso
[ Upstream commit
4530e5b8e2dad63dcad2206232dd86e4b1489b6c ]
Call skb_gso_validate_network_len() to check if packet is over PMTU.
Fixes:
459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pablo Neira Ayuso [Sun, 22 Oct 2023 20:25:17 +0000 (22:25 +0200)]
gtp: uapi: fix GTPA_MAX
[ Upstream commit
adc8df12d91a2b8350b0cd4c7fec3e8546c9d1f8 ]
Subtract one to __GTPA_MAX, otherwise GTPA_MAX is off by 2.
Fixes:
459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fred Chen [Sat, 21 Oct 2023 00:19:47 +0000 (08:19 +0800)]
tcp: fix wrong RTO timeout when received SACK reneging
[ Upstream commit
d2a0fc372aca561556e765d0a9ec365c7c12f0ad ]
This commit fix wrong RTO timeout when received SACK reneging.
When an ACK arrived pointing to a SACK reneging, tcp_check_sack_reneging()
will rearm the RTO timer for min(1/2*srtt, 10ms) into to the future.
But since the commit
62d9f1a6945b ("tcp: fix TLP timer not set when
CA_STATE changes from DISORDER to OPEN") merged, the tcp_set_xmit_timer()
is moved after tcp_fastretrans_alert()(which do the SACK reneging check),
so the RTO timeout will be overwrited by tcp_set_xmit_timer() with
icsk_rto instead of 1/2*srtt.
Here is a packetdrill script to check this bug:
0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 bind(3, ..., ...) = 0
+0 listen(3, 1) = 0
// simulate srtt to 100ms
+0 < S 0:0(0) win 32792 <mss 1000, sackOK,nop,nop,nop,wscale 7>
+0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7>
+.1 < . 1:1(0) ack 1 win 1024
+0 accept(3, ..., ...) = 4
+0 write(4, ..., 10000) = 10000
+0 > P. 1:10001(10000) ack 1
// inject sack
+.1 < . 1:1(0) ack 1 win 257 <sack 1001:10001,nop,nop>
+0 > . 1:1001(1000) ack 1
// inject sack reneging
+.1 < . 1:1(0) ack 1001 win 257 <sack 9001:10001,nop,nop>
// we expect rto fired in 1/2*srtt (50ms)
+.05 > . 1001:2001(1000) ack 1
This fix remove the FLAG_SET_XMIT_TIMER from ack_flag when
tcp_check_sack_reneging() set RTO timer with 1/2*srtt to avoid
being overwrited later.
Fixes:
62d9f1a6945b ("tcp: fix TLP timer not set when CA_STATE changes from DISORDER to OPEN")
Signed-off-by: Fred Chen <fred.chenchen03@gmail.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Douglas Anderson [Fri, 20 Oct 2023 21:06:55 +0000 (14:06 -0700)]
r8152: Release firmware if we have an error in probe
[ Upstream commit
b8d35024d4059ca550cba11ac9ab23a6c238d929 ]
The error handling in rtl8152_probe() is missing a call to release
firmware. Add it in to match what's in the cleanup code in
rtl8152_disconnect().
Fixes:
9370f2d05a2a ("r8152: support request_firmware for RTL8153")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Douglas Anderson [Fri, 20 Oct 2023 21:06:54 +0000 (14:06 -0700)]
r8152: Cancel hw_phy_work if we have an error in probe
[ Upstream commit
bb8adff9123e492598162ac1baad01a53891aef6 ]
The error handling in rtl8152_probe() is missing a call to cancel the
hw_phy_work. Add it in to match what's in the cleanup code in
rtl8152_disconnect().
Fixes:
a028a9e003f2 ("r8152: move the settings of PHY to a work queue")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Douglas Anderson [Fri, 20 Oct 2023 21:06:53 +0000 (14:06 -0700)]
r8152: Run the unload routine if we have errors during probe
[ Upstream commit
5dd17689526971c5ae12bc8398f34bd68cd0499e ]
The rtl8152_probe() function lacks a call to the chip-specific
unload() routine when it sees an error in probe. Add it in to match
the cleanup code in rtl8152_disconnect().
Fixes:
ac718b69301c ("net/usb: new driver for RTL8152")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Douglas Anderson [Fri, 20 Oct 2023 21:06:52 +0000 (14:06 -0700)]
r8152: Increase USB control msg timeout to 5000ms as per spec
[ Upstream commit
a5feba71ec9c14a54c3babdc732c5b6866d8ee43 ]
According to the comment next to USB_CTRL_GET_TIMEOUT and
USB_CTRL_SET_TIMEOUT, although sending/receiving control messages is
usually quite fast, the spec allows them to take up to 5 seconds.
Let's increase the timeout in the Realtek driver from 500ms to 5000ms
(using the #defines) to account for this.
This is not just a theoretical change. The need for the longer timeout
was seen in testing. Specifically, if you drop a sc7180-trogdor based
Chromebook into the kdb debugger and then "go" again after sitting in
the debugger for a while, the next USB control message takes a long
time. Out of ~40 tests the slowest USB control message was 4.5
seconds.
While dropping into kdb is not exactly an end-user scenario, the above
is similar to what could happen due to an temporary interrupt storm,
what could happen if there was a host controller (HW or SW) issue, or
what could happen if the Realtek device got into a confused state and
needed time to recover.
This change is fairly critical since the r8152 driver in Linux doesn't
expect register reads/writes (which are backed by USB control
messages) to fail.
Fixes:
ac718b69301c ("net/usb: new driver for RTL8152")
Suggested-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shigeru Yoshida [Fri, 20 Oct 2023 17:03:44 +0000 (02:03 +0900)]
net: usb: smsc95xx: Fix uninit-value access in smsc95xx_read_reg
[ Upstream commit
51a32e828109b4a209efde44505baa356b37a4ce ]
syzbot reported the following uninit-value access issue [1]:
smsc95xx 1-1:0.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x00000030: -32
smsc95xx 1-1:0.0 (unnamed net_device) (uninitialized): Error reading E2P_CMD
=====================================================
BUG: KMSAN: uninit-value in smsc95xx_reset+0x409/0x25f0 drivers/net/usb/smsc95xx.c:896
smsc95xx_reset+0x409/0x25f0 drivers/net/usb/smsc95xx.c:896
smsc95xx_bind+0x9bc/0x22e0 drivers/net/usb/smsc95xx.c:1131
usbnet_probe+0x100b/0x4060 drivers/net/usb/usbnet.c:1750
usb_probe_interface+0xc75/0x1210 drivers/usb/core/driver.c:396
really_probe+0x506/0xf40 drivers/base/dd.c:658
__driver_probe_device+0x2a7/0x5d0 drivers/base/dd.c:800
driver_probe_device+0x72/0x7b0 drivers/base/dd.c:830
__device_attach_driver+0x55a/0x8f0 drivers/base/dd.c:958
bus_for_each_drv+0x3ff/0x620 drivers/base/bus.c:457
__device_attach+0x3bd/0x640 drivers/base/dd.c:1030
device_initial_probe+0x32/0x40 drivers/base/dd.c:1079
bus_probe_device+0x3d8/0x5a0 drivers/base/bus.c:532
device_add+0x16ae/0x1f20 drivers/base/core.c:3622
usb_set_configuration+0x31c9/0x38c0 drivers/usb/core/message.c:2207
usb_generic_driver_probe+0x109/0x2a0 drivers/usb/core/generic.c:238
usb_probe_device+0x290/0x4a0 drivers/usb/core/driver.c:293
really_probe+0x506/0xf40 drivers/base/dd.c:658
__driver_probe_device+0x2a7/0x5d0 drivers/base/dd.c:800
driver_probe_device+0x72/0x7b0 drivers/base/dd.c:830
__device_attach_driver+0x55a/0x8f0 drivers/base/dd.c:958
bus_for_each_drv+0x3ff/0x620 drivers/base/bus.c:457
__device_attach+0x3bd/0x640 drivers/base/dd.c:1030
device_initial_probe+0x32/0x40 drivers/base/dd.c:1079
bus_probe_device+0x3d8/0x5a0 drivers/base/bus.c:532
device_add+0x16ae/0x1f20 drivers/base/core.c:3622
usb_new_device+0x15f6/0x22f0 drivers/usb/core/hub.c:2589
hub_port_connect drivers/usb/core/hub.c:5440 [inline]
hub_port_connect_change drivers/usb/core/hub.c:5580 [inline]
port_event drivers/usb/core/hub.c:5740 [inline]
hub_event+0x53bc/0x7290 drivers/usb/core/hub.c:5822
process_one_work kernel/workqueue.c:2630 [inline]
process_scheduled_works+0x104e/0x1e70 kernel/workqueue.c:2703
worker_thread+0xf45/0x1490 kernel/workqueue.c:2784
kthread+0x3e8/0x540 kernel/kthread.c:388
ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
Local variable buf.i225 created at:
smsc95xx_read_reg drivers/net/usb/smsc95xx.c:90 [inline]
smsc95xx_reset+0x203/0x25f0 drivers/net/usb/smsc95xx.c:892
smsc95xx_bind+0x9bc/0x22e0 drivers/net/usb/smsc95xx.c:1131
CPU: 1 PID: 773 Comm: kworker/1:2 Not tainted 6.6.0-rc1-syzkaller-00125-ge42bebf6db29 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023
Workqueue: usb_hub_wq hub_event
=====================================================
Similar to
e9c65989920f ("net: usb: smsc75xx: Fix uninit-value access in
__smsc75xx_read_reg"), this issue is caused because usbnet_read_cmd() reads
less bytes than requested (zero byte in the reproducer). In this case,
'buf' is not properly filled.
This patch fixes the issue by returning -ENODATA if usbnet_read_cmd() reads
less bytes than requested.
sysbot reported similar uninit-value access issue [2]. The root cause is
the same as mentioned above, and this patch addresses it as well.
Fixes:
2f7ca802bdae ("net: Add SMSC LAN9500 USB2.0 10/100 ethernet adapter driver")
Reported-and-tested-by: syzbot+c74c24b43c9ae534f0e0@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+2c97a98a5ba9ea9c23bd@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=
c74c24b43c9ae534f0e0 [1]
Closes: https://syzkaller.appspot.com/bug?extid=
2c97a98a5ba9ea9c23bd [2]
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Sat, 21 Oct 2023 18:03:53 +0000 (20:03 +0200)]
net: ieee802154: adf7242: Fix some potential buffer overflow in adf7242_stats_show()
[ Upstream commit
ca082f019d8fbb983f03080487946da714154bae ]
strncat() usage in adf7242_debugfs_init() is wrong.
The size given to strncat() is the maximum number of bytes that can be
written, excluding the trailing NULL.
Here, the size that is passed, DNAME_INLINE_LEN, does not take into account
the size of "adf7242-" that is already in the array.
In order to fix it, use snprintf() instead.
Fixes:
7302b9d90117 ("ieee802154/adf7242: Driver for ADF7242 MAC IEEE802154")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dell Jin [Fri, 20 Oct 2023 06:20:53 +0000 (09:20 +0300)]
net: ethernet: adi: adin1110: Fix uninitialized variable
[ Upstream commit
965f9b8c0c1b37fa2a0e3ef56e40d5666d4cbb5c ]
The spi_transfer struct has to have all it's fields initialized to 0 in
this case, since not all of them are set before starting the transfer.
Otherwise, spi_sync_transfer() will sometimes return an error.
Fixes:
a526a3cc9c8d ("net: ethernet: adi: adin1110: Fix SPI transfers")
Signed-off-by: Dell Jin <dell.jin.code@outlook.com>
Signed-off-by: Ciprian Regus <ciprian.regus@analog.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sasha Neftin [Thu, 19 Oct 2023 20:36:41 +0000 (13:36 -0700)]
igc: Fix ambiguity in the ethtool advertising
[ Upstream commit
e7684d29efdf37304c62bb337ea55b3428ca118e ]
The 'ethtool_convert_link_mode_to_legacy_u32' method does not allow us to
advertise 2500M speed support and TP (twisted pair) properly. Convert to
'ethtool_link_ksettings_test_link_mode' to advertise supported speed and
eliminate ambiguity.
Fixes:
8c5ad0dae93c ("igc: Add ethtool support")
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Suggested-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231019203641.3661960-1-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Thu, 19 Oct 2023 12:21:04 +0000 (12:21 +0000)]
neighbour: fix various data-races
[ Upstream commit
a9beb7e81bcb876615e1fbb3c07f3f9dba69831f ]
1) tbl->gc_thresh1, tbl->gc_thresh2, tbl->gc_thresh3 and tbl->gc_interval
can be written from sysfs.
2) tbl->last_flush is read locklessly from neigh_alloc()
3) tbl->proxy_queue.qlen is read locklessly from neightbl_fill_info()
4) neightbl_fill_info() reads cpu stats that can be changed concurrently.
Fixes:
c7fb64db001f ("[NETLINK]: Neighbour table configuration and statistics via rtnetlink")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231019122104.1448310-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mateusz Palczewski [Thu, 19 Oct 2023 20:40:35 +0000 (13:40 -0700)]
igb: Fix potential memory leak in igb_add_ethtool_nfc_entry
[ Upstream commit
8c0b48e01daba5ca58f939a8425855d3f4f2ed14 ]
Add check for return of igb_update_ethtool_nfc_entry so that in case
of any potential errors the memory alocated for input will be freed.
Fixes:
0e71def25281 ("igb: add support of RX network flow classification")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kunwu Chan [Fri, 20 Oct 2023 09:31:56 +0000 (17:31 +0800)]
treewide: Spelling fix in comment
[ Upstream commit
fb71ba0ed8be9534493c80ba00142a64d9972a72 ]
reques -> request
Fixes:
09dde54c6a69 ("PS3: gelic: Add wireless support for PS3")
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ivan Vecera [Thu, 19 Oct 2023 16:37:20 +0000 (18:37 +0200)]
i40e: Fix I40E_FLAG_VF_VLAN_PRUNING value
[ Upstream commit
665e7d83c5386f9abdc67b2e4b6e6d9579aadfcb ]
Commit
c87c938f62d8f1 ("i40e: Add VF VLAN pruning") added new
PF flag I40E_FLAG_VF_VLAN_PRUNING but its value collides with
existing I40E_FLAG_TOTAL_PORT_SHUTDOWN_ENABLED flag.
Move the affected flag at the end of the flags and fix its value.
Reproducer:
[root@cnb-03 ~]# ethtool --set-priv-flags enp2s0f0np0 link-down-on-close on
[root@cnb-03 ~]# ethtool --set-priv-flags enp2s0f0np0 vf-vlan-pruning on
[root@cnb-03 ~]# ethtool --set-priv-flags enp2s0f0np0 link-down-on-close off
[ 6323.142585] i40e 0000:02:00.0: Setting link-down-on-close not supported on this port (because total-port-shutdown is enabled)
netlink error: Operation not supported
[root@cnb-03 ~]# ethtool --set-priv-flags enp2s0f0np0 vf-vlan-pruning off
[root@cnb-03 ~]# ethtool --set-priv-flags enp2s0f0np0 link-down-on-close off
The link-down-on-close flag cannot be modified after setting vf-vlan-pruning
because vf-vlan-pruning shares the same bit with total-port-shutdown flag
that prevents any modification of link-down-on-close flag.
Fixes:
c87c938f62d8 ("i40e: Add VF VLAN pruning")
Cc: Mateusz Palczewski <mateusz.palczewski@intel.com>
Cc: Simon Horman <horms@kernel.org>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michal Schmidt [Thu, 19 Oct 2023 07:13:46 +0000 (09:13 +0200)]
iavf: initialize waitqueues before starting watchdog_task
[ Upstream commit
7db3111043885c146e795c199d39c3f9042d97c0 ]
It is not safe to initialize the waitqueues after queueing the
watchdog_task. It will be using them.
The chance of this causing a real problem is very small, because
there will be some sleeping before any of the waitqueues get used.
I got a crash only after inserting an artificial sleep in iavf_probe.
Queue the watchdog_task as the last step in iavf_probe. Add a comment to
prevent repeating the mistake.
Fixes:
fe2647ab0c99 ("i40evf: prevent VF close returning before state transitions to DOWN")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mirsad Goran Todorovac [Wed, 18 Oct 2023 19:34:38 +0000 (21:34 +0200)]
r8169: fix the KCSAN reported data race in rtl_rx while reading desc->opts1
[ Upstream commit
f97eee484e71890131f9c563c5cc6d5a69e4308d ]
KCSAN reported the following data-race bug:
==================================================================
BUG: KCSAN: data-race in rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4430 drivers/net/ethernet/realtek/r8169_main.c:4583) r8169
race at unknown origin, with read to 0xffff888117e43510 of 4 bytes by interrupt on cpu 21:
rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4430 drivers/net/ethernet/realtek/r8169_main.c:4583) r8169
__napi_poll (net/core/dev.c:6527)
net_rx_action (net/core/dev.c:6596 net/core/dev.c:6727)
__do_softirq (kernel/softirq.c:553)
__irq_exit_rcu (kernel/softirq.c:427 kernel/softirq.c:632)
irq_exit_rcu (kernel/softirq.c:647)
sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1074 (discriminator 14))
asm_sysvec_apic_timer_interrupt (./arch/x86/include/asm/idtentry.h:645)
cpuidle_enter_state (drivers/cpuidle/cpuidle.c:291)
cpuidle_enter (drivers/cpuidle/cpuidle.c:390)
call_cpuidle (kernel/sched/idle.c:135)
do_idle (kernel/sched/idle.c:219 kernel/sched/idle.c:282)
cpu_startup_entry (kernel/sched/idle.c:378 (discriminator 1))
start_secondary (arch/x86/kernel/smpboot.c:210 arch/x86/kernel/smpboot.c:294)
secondary_startup_64_no_verify (arch/x86/kernel/head_64.S:433)
value changed: 0x80003fff -> 0x3402805f
Reported by Kernel Concurrency Sanitizer on:
CPU: 21 PID: 0 Comm: swapper/21 Tainted: G L 6.6.0-rc2-kcsan-00143-gb5cbe7c00aa0 #41
Hardware name: ASRock X670E PG Lightning/X670E PG Lightning, BIOS 1.21 04/26/2023
==================================================================
drivers/net/ethernet/realtek/r8169_main.c:
==========================================
4429
→ 4430 status = le32_to_cpu(desc->opts1);
4431 if (status & DescOwn)
4432 break;
4433
4434 /* This barrier is needed to keep us from reading
4435 * any other fields out of the Rx descriptor until
4436 * we know the status of DescOwn
4437 */
4438 dma_rmb();
4439
4440 if (unlikely(status & RxRES)) {
4441 if (net_ratelimit())
4442 netdev_warn(dev, "Rx ERROR. status = %08x\n",
Marco Elver explained that dma_rmb() doesn't prevent the compiler to tear up the access to
desc->opts1 which can be written to concurrently. READ_ONCE() should prevent that from
happening:
4429
→ 4430 status = le32_to_cpu(READ_ONCE(desc->opts1));
4431 if (status & DescOwn)
4432 break;
4433
As the consequence of this fix, this KCSAN warning was eliminated.
Fixes:
6202806e7c03a ("r8169: drop member opts1_mask from struct rtl8169_private")
Suggested-by: Marco Elver <elver@google.com>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: nic_swsd@realtek.com
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/lkml/dc7fc8fa-4ea4-e9a9-30a6-7c83e6b53188@alu.unizg.hr/
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mirsad Goran Todorovac [Wed, 18 Oct 2023 19:34:36 +0000 (21:34 +0200)]
r8169: fix the KCSAN reported data-race in rtl_tx while reading TxDescArray[entry].opts1
[ Upstream commit
dcf75a0f6bc136de94e88178ae5f51b7f879abc9 ]
KCSAN reported the following data-race:
==================================================================
BUG: KCSAN: data-race in rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4368 drivers/net/ethernet/realtek/r8169_main.c:4581) r8169
race at unknown origin, with read to 0xffff888140d37570 of 4 bytes by interrupt on cpu 21:
rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4368 drivers/net/ethernet/realtek/r8169_main.c:4581) r8169
__napi_poll (net/core/dev.c:6527)
net_rx_action (net/core/dev.c:6596 net/core/dev.c:6727)
__do_softirq (kernel/softirq.c:553)
__irq_exit_rcu (kernel/softirq.c:427 kernel/softirq.c:632)
irq_exit_rcu (kernel/softirq.c:647)
sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1074 (discriminator 14))
asm_sysvec_apic_timer_interrupt (./arch/x86/include/asm/idtentry.h:645)
cpuidle_enter_state (drivers/cpuidle/cpuidle.c:291)
cpuidle_enter (drivers/cpuidle/cpuidle.c:390)
call_cpuidle (kernel/sched/idle.c:135)
do_idle (kernel/sched/idle.c:219 kernel/sched/idle.c:282)
cpu_startup_entry (kernel/sched/idle.c:378 (discriminator 1))
start_secondary (arch/x86/kernel/smpboot.c:210 arch/x86/kernel/smpboot.c:294)
secondary_startup_64_no_verify (arch/x86/kernel/head_64.S:433)
value changed: 0xb0000042 -> 0x00000000
Reported by Kernel Concurrency Sanitizer on:
CPU: 21 PID: 0 Comm: swapper/21 Tainted: G L 6.6.0-rc2-kcsan-00143-gb5cbe7c00aa0 #41
Hardware name: ASRock X670E PG Lightning/X670E PG Lightning, BIOS 1.21 04/26/2023
==================================================================
The read side is in
drivers/net/ethernet/realtek/r8169_main.c
=========================================
4355 static void rtl_tx(struct net_device *dev, struct rtl8169_private *tp,
4356 int budget)
4357 {
4358 unsigned int dirty_tx, bytes_compl = 0, pkts_compl = 0;
4359 struct sk_buff *skb;
4360
4361 dirty_tx = tp->dirty_tx;
4362
4363 while (READ_ONCE(tp->cur_tx) != dirty_tx) {
4364 unsigned int entry = dirty_tx % NUM_TX_DESC;
4365 u32 status;
4366
→ 4367 status = le32_to_cpu(tp->TxDescArray[entry].opts1);
4368 if (status & DescOwn)
4369 break;
4370
4371 skb = tp->tx_skb[entry].skb;
4372 rtl8169_unmap_tx_skb(tp, entry);
4373
4374 if (skb) {
4375 pkts_compl++;
4376 bytes_compl += skb->len;
4377 napi_consume_skb(skb, budget);
4378 }
4379 dirty_tx++;
4380 }
4381
4382 if (tp->dirty_tx != dirty_tx) {
4383 dev_sw_netstats_tx_add(dev, pkts_compl, bytes_compl);
4384 WRITE_ONCE(tp->dirty_tx, dirty_tx);
4385
4386 netif_subqueue_completed_wake(dev, 0, pkts_compl, bytes_compl,
4387 rtl_tx_slots_avail(tp),
4388 R8169_TX_START_THRS);
4389 /*
4390 * 8168 hack: TxPoll requests are lost when the Tx packets are
4391 * too close. Let's kick an extra TxPoll request when a burst
4392 * of start_xmit activity is detected (if it is not detected,
4393 * it is slow enough). -- FR
4394 * If skb is NULL then we come here again once a tx irq is
4395 * triggered after the last fragment is marked transmitted.
4396 */
4397 if (READ_ONCE(tp->cur_tx) != dirty_tx && skb)
4398 rtl8169_doorbell(tp);
4399 }
4400 }
tp->TxDescArray[entry].opts1 is reported to have a data-race and READ_ONCE() fixes
this KCSAN warning.
4366
→ 4367 status = le32_to_cpu(READ_ONCE(tp->TxDescArray[entry].opts1));
4368 if (status & DescOwn)
4369 break;
4370
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: nic_swsd@realtek.com
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Marco Elver <elver@google.com>
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/lkml/dc7fc8fa-4ea4-e9a9-30a6-7c83e6b53188@alu.unizg.hr/
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Acked-by: Marco Elver <elver@google.com>
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mirsad Goran Todorovac [Wed, 18 Oct 2023 19:34:34 +0000 (21:34 +0200)]
r8169: fix the KCSAN reported data-race in rtl_tx() while reading tp->cur_tx
[ Upstream commit
c1c0ce31b2420d5c173228a2132a492ede03d81f ]
KCSAN reported the following data-race:
==================================================================
BUG: KCSAN: data-race in rtl8169_poll [r8169] / rtl8169_start_xmit [r8169]
write (marked) to 0xffff888102474b74 of 4 bytes by task 5358 on cpu 29:
rtl8169_start_xmit (drivers/net/ethernet/realtek/r8169_main.c:4254) r8169
dev_hard_start_xmit (./include/linux/netdevice.h:4889 ./include/linux/netdevice.h:4903 net/core/dev.c:3544 net/core/dev.c:3560)
sch_direct_xmit (net/sched/sch_generic.c:342)
__dev_queue_xmit (net/core/dev.c:3817 net/core/dev.c:4306)
ip_finish_output2 (./include/linux/netdevice.h:3082 ./include/net/neighbour.h:526 ./include/net/neighbour.h:540 net/ipv4/ip_output.c:233)
__ip_finish_output (net/ipv4/ip_output.c:311 net/ipv4/ip_output.c:293)
ip_finish_output (net/ipv4/ip_output.c:328)
ip_output (net/ipv4/ip_output.c:435)
ip_send_skb (./include/net/dst.h:458 net/ipv4/ip_output.c:127 net/ipv4/ip_output.c:1486)
udp_send_skb (net/ipv4/udp.c:963)
udp_sendmsg (net/ipv4/udp.c:1246)
inet_sendmsg (net/ipv4/af_inet.c:840 (discriminator 4))
sock_sendmsg (net/socket.c:730 net/socket.c:753)
__sys_sendto (net/socket.c:2177)
__x64_sys_sendto (net/socket.c:2185)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
read to 0xffff888102474b74 of 4 bytes by interrupt on cpu 21:
rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4397 drivers/net/ethernet/realtek/r8169_main.c:4581) r8169
__napi_poll (net/core/dev.c:6527)
net_rx_action (net/core/dev.c:6596 net/core/dev.c:6727)
__do_softirq (kernel/softirq.c:553)
__irq_exit_rcu (kernel/softirq.c:427 kernel/softirq.c:632)
irq_exit_rcu (kernel/softirq.c:647)
common_interrupt (arch/x86/kernel/irq.c:247 (discriminator 14))
asm_common_interrupt (./arch/x86/include/asm/idtentry.h:636)
cpuidle_enter_state (drivers/cpuidle/cpuidle.c:291)
cpuidle_enter (drivers/cpuidle/cpuidle.c:390)
call_cpuidle (kernel/sched/idle.c:135)
do_idle (kernel/sched/idle.c:219 kernel/sched/idle.c:282)
cpu_startup_entry (kernel/sched/idle.c:378 (discriminator 1))
start_secondary (arch/x86/kernel/smpboot.c:210 arch/x86/kernel/smpboot.c:294)
secondary_startup_64_no_verify (arch/x86/kernel/head_64.S:433)
value changed: 0x002f4815 -> 0x002f4816
Reported by Kernel Concurrency Sanitizer on:
CPU: 21 PID: 0 Comm: swapper/21 Tainted: G L 6.6.0-rc2-kcsan-00143-gb5cbe7c00aa0 #41
Hardware name: ASRock X670E PG Lightning/X670E PG Lightning, BIOS 1.21 04/26/2023
==================================================================
The write side of drivers/net/ethernet/realtek/r8169_main.c is:
==================
4251 /* rtl_tx needs to see descriptor changes before updated tp->cur_tx */
4252 smp_wmb();
4253
→ 4254 WRITE_ONCE(tp->cur_tx, tp->cur_tx + frags + 1);
4255
4256 stop_queue = !netif_subqueue_maybe_stop(dev, 0, rtl_tx_slots_avail(tp),
4257 R8169_TX_STOP_THRS,
4258 R8169_TX_START_THRS);
The read side is the function rtl_tx():
4355 static void rtl_tx(struct net_device *dev, struct rtl8169_private *tp,
4356 int budget)
4357 {
4358 unsigned int dirty_tx, bytes_compl = 0, pkts_compl = 0;
4359 struct sk_buff *skb;
4360
4361 dirty_tx = tp->dirty_tx;
4362
4363 while (READ_ONCE(tp->cur_tx) != dirty_tx) {
4364 unsigned int entry = dirty_tx % NUM_TX_DESC;
4365 u32 status;
4366
4367 status = le32_to_cpu(tp->TxDescArray[entry].opts1);
4368 if (status & DescOwn)
4369 break;
4370
4371 skb = tp->tx_skb[entry].skb;
4372 rtl8169_unmap_tx_skb(tp, entry);
4373
4374 if (skb) {
4375 pkts_compl++;
4376 bytes_compl += skb->len;
4377 napi_consume_skb(skb, budget);
4378 }
4379 dirty_tx++;
4380 }
4381
4382 if (tp->dirty_tx != dirty_tx) {
4383 dev_sw_netstats_tx_add(dev, pkts_compl, bytes_compl);
4384 WRITE_ONCE(tp->dirty_tx, dirty_tx);
4385
4386 netif_subqueue_completed_wake(dev, 0, pkts_compl, bytes_compl,
4387 rtl_tx_slots_avail(tp),
4388 R8169_TX_START_THRS);
4389 /*
4390 * 8168 hack: TxPoll requests are lost when the Tx packets are
4391 * too close. Let's kick an extra TxPoll request when a burst
4392 * of start_xmit activity is detected (if it is not detected,
4393 * it is slow enough). -- FR
4394 * If skb is NULL then we come here again once a tx irq is
4395 * triggered after the last fragment is marked transmitted.
4396 */
→ 4397 if (tp->cur_tx != dirty_tx && skb)
4398 rtl8169_doorbell(tp);
4399 }
4400 }
Obviously from the code, an earlier detected data-race for tp->cur_tx was fixed in the
line 4363:
4363 while (READ_ONCE(tp->cur_tx) != dirty_tx) {
but the same solution is required for protecting the other access to tp->cur_tx:
→ 4397 if (READ_ONCE(tp->cur_tx) != dirty_tx && skb)
4398 rtl8169_doorbell(tp);
The write in the line 4254 is protected with WRITE_ONCE(), but the read in the line 4397
might have suffered read tearing under some compiler optimisations.
The fix eliminated the KCSAN data-race report for this bug.
It is yet to be evaluated what happens if tp->cur_tx changes between the test in line 4363
and line 4397. This test should certainly not be cached by the compiler in some register
for such a long time, while asynchronous writes to tp->cur_tx might have occurred in line
4254 in the meantime.
Fixes:
94d8a98e6235c ("r8169: reduce number of workaround doorbell rings")
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: nic_swsd@realtek.com
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Marco Elver <elver@google.com>
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/lkml/dc7fc8fa-4ea4-e9a9-30a6-7c83e6b53188@alu.unizg.hr/
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tony Lindgren [Wed, 11 Oct 2023 07:15:56 +0000 (10:15 +0300)]
clk: ti: Fix missing omap5 mcbsp functional clock and aliases
[ Upstream commit
0b9a4a67c60d3e15b39a69d480a50ce7eeff9bc1 ]
We are using a wrong mcbsp functional clock. The interconnect target module
driver provided clock for mcbsp is not same as the mcbsp functional clock
known as the gfclk main_clk. The mcbsp functional clocks for mcbsp should
have been added before we dropped the legacy platform data.
Additionally we are also missing the clock aliases for the clocks used by
the audio driver if reparenting is needed. This causes audio driver errors
like "CLKS: could not clk_get() prcm_fck" for mcbsp as reported by Andreas.
The mcbsp clock aliases too should have been added before we dropped the
legacy platform data.
Let's add the clocks and aliases with a single patch to fix the issue
similar to omap4. On omap5, there is no mcbsp4 instance on the l4_per
interconnect.
Fixes:
b1da0fa21bd1 ("ARM: OMAP2+: Drop legacy platform data for omap5 mcbsp")
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Reported-by: Andreas Kemnade <andreas@kemnade.info>
Reported-by: Péter Ujfalusi <peter.ujfalusi@gmail.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tony Lindgren [Wed, 11 Oct 2023 07:15:56 +0000 (10:15 +0300)]
clk: ti: Fix missing omap4 mcbsp functional clock and aliases
[ Upstream commit
cc2d819dd7df94a72bde7b9b9331a6535084092d ]
We are using a wrong mcbsp functional clock. The interconnect target module
driver provided clock for mcbsp is not same as the mcbsp functional clock
known as the gfclk main_clk. The mcbsp functional clocks for mcbsp should
have been added before we dropped the legacy platform data.
Additionally we are also missing the clock aliases for the clocks used by
the audio driver if reparenting is needed. This causes audio driver errors
like "CLKS: could not clk_get() prcm_fck" for mcbsp as reported by Andreas.
The mcbsp clock aliases too should have been added before we dropped the
legacy platform data.
Let's add the clocks and aliases with a single patch to fix the issue.
Fixes:
349355ce3a05 ("ARM: OMAP2+: Drop legacy platform data for omap4 mcbsp")
Reported-by: Andreas Kemnade <andreas@kemnade.info>
Reported-by: Péter Ujfalusi <peter.ujfalusi@gmail.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hao Ge [Sun, 8 Oct 2023 03:29:08 +0000 (11:29 +0800)]
firmware/imx-dsp: Fix use_after_free in imx_dsp_setup_channels()
[ Upstream commit
1558b1a8dd388f5fcc3abc1e24de854a295044c3 ]
dsp_chan->name and chan_name points to same block of memory,
because dev_err still needs to be used it,so we need free
it's memory after use to avoid use_after_free.
Fixes:
e527adfb9b7d ("firmware: imx-dsp: Fix an error handling path in imx_dsp_setup_channels()")
Signed-off-by: Hao Ge <gehao@kylinos.cn>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randy Dunlap [Sat, 7 Oct 2023 00:16:03 +0000 (17:16 -0700)]
ARM: OMAP: timer32K: fix all kernel-doc warnings
[ Upstream commit
7eeca8ccd1066c68d6002dbbe26433f8c17c53eb ]
Fix kernel-doc warnings reported by the kernel test robot:
timer32k.c:186: warning: cannot understand function prototype: 'struct timespec64 persistent_ts; '
timer32k.c:191: warning: Function parameter or member 'ts' not described in 'omap_read_persistent_clock64'
timer32k.c:216: warning: Function parameter or member 'vbase' not described in 'omap_init_clocksource_32k'
timer32k.c:216: warning: Excess function parameter 'pbase' description in 'omap_init_clocksource_32k'
timer32k.c:216: warning: Excess function parameter 'size' description in 'omap_init_clocksource_32k'
timer32k.c:216: warning: No description found for return value of 'omap_init_clocksource_32k'
Fixes:
a451570c008b ("ARM: OMAP: 32k counter: Provide y2038-safe omap_read_persistent_clock() replacement")
Fixes:
1fe97c8f6a1d ("ARM: OMAP: Make OMAP clocksource source selection using kernel param")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/all/
202310070106.8QSyJOm3-lkp@intel.com/
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Vaibhav Hiremath <hvaibhav@ti.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Xunlei Pang <pang.xunlei@linaro.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Cc: linux-omap@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Message-ID: <
20231007001603.24972-1-rdunlap@infradead.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lukasz Majczak [Fri, 22 Sep 2023 06:34:10 +0000 (08:34 +0200)]
drm/dp_mst: Fix NULL deref in get_mst_branch_device_by_guid_helper()
commit
3d887d512494d678b17c57b835c32f4e48d34f26 upstream.
As drm_dp_get_mst_branch_device_by_guid() is called from
drm_dp_get_mst_branch_device_by_guid(), mstb parameter has to be checked,
otherwise NULL dereference may occur in the call to
the memcpy() and cause following:
[12579.365869] BUG: kernel NULL pointer dereference, address:
0000000000000049
[12579.365878] #PF: supervisor read access in kernel mode
[12579.365880] #PF: error_code(0x0000) - not-present page
[12579.365882] PGD 0 P4D 0
[12579.365887] Oops: 0000 [#1] PREEMPT SMP NOPTI
...
[12579.365895] Workqueue: events_long drm_dp_mst_up_req_work
[12579.365899] RIP: 0010:memcmp+0xb/0x29
[12579.365921] Call Trace:
[12579.365927] get_mst_branch_device_by_guid_helper+0x22/0x64
[12579.365930] drm_dp_mst_up_req_work+0x137/0x416
[12579.365933] process_one_work+0x1d0/0x419
[12579.365935] worker_thread+0x11a/0x289
[12579.365938] kthread+0x13e/0x14f
[12579.365941] ? process_one_work+0x419/0x419
[12579.365943] ? kthread_blkcg+0x31/0x31
[12579.365946] ret_from_fork+0x1f/0x30
As get_mst_branch_device_by_guid_helper() is recursive, moving condition
to the first line allow to remove a similar one for step over of NULL elements
inside a loop.
Fixes:
5e93b8208d3c ("drm/dp/mst: move GUID storage from mgr, port to only mst branch")
Cc: <stable@vger.kernel.org> # 4.14+
Signed-off-by: Lukasz Majczak <lma@semihalf.com>
Reviewed-by: Radoslaw Biernacki <rad@chromium.org>
Signed-off-by: Manasi Navare <navaremanasi@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230922063410.23626-1-lma@semihalf.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mario Limonciello [Fri, 20 Oct 2023 15:26:29 +0000 (10:26 -0500)]
drm/amd: Disable ASPM for VI w/ all Intel systems
commit
64ffd2f1d00c6235dabe9704bbb0d9ce3e28147f upstream.
Originally we were quirking ASPM disabled specifically for VI when
used with Alder Lake, but it appears to have problems with Rocket
Lake as well.
Like we've done in the case of dpm for newer platforms, disable
ASPM for all Intel systems.
Cc: stable@vger.kernel.org # 5.15+
Fixes:
0064b0ce85bb ("drm/amd/pm: enable ASPM by default")
Reported-and-tested-by: Paolo Gentili <paolo.gentili@canonical.com>
Closes: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2036742
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Umesh Nerlige Ramappa [Fri, 20 Oct 2023 15:24:41 +0000 (08:24 -0700)]
drm/i915/pmu: Check if pmu is closed before stopping event
commit
4cbed7702eb775cca22fff6827a549092cb59f61 upstream.
When the driver unbinds, pmu is unregistered and i915->uabi_engines is
set to RB_ROOT. Due to this, when i915 PMU tries to stop the engine
events, it issues a warn_on because engine lookup fails.
All perf hooks are taking care of this using a pmu->closed flag that is
set when PMU unregisters. The stop event seems to have been left out.
Check for pmu->closed in pmu_event_stop as well.
Based on discussion here -
https://patchwork.freedesktop.org/patch/492079/?series=105790&rev=2
v2: s/is/if/ in commit title
v3: Add fixes tag and cc stable
Cc: <stable@vger.kernel.org> # v5.11+
Fixes:
b00bccb3f0bb ("drm/i915/pmu: Handle PCI unbind")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231020152441.3764850-1-umesh.nerlige.ramappa@intel.com
(cherry picked from commit
31f6a06f0c543b43a38fab10f39e5fc45ad62aa2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Sun, 15 Oct 2023 01:34:40 +0000 (21:34 -0400)]
nfsd: lock_rename() needs both directories to live on the same fs
commit
1aee9158bc978f91701c5992e395efbc6da2de3c upstream.
... checking that after lock_rename() is too late. Incidentally,
NFSv2 had no nfserr_xdev...
Fixes:
aa387d6ce153 "nfsd: fix EXDEV checking in rename"
Cc: stable@vger.kernel.org # v3.9+
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Liam R. Howlett [Thu, 12 Oct 2023 15:52:33 +0000 (11:52 -0400)]
maple_tree: add GFP_KERNEL to allocations in mas_expected_entries()
commit
099d7439ce03d0e7bc8f0c3d7878b562f3a48d3d upstream.
Users complained about OOM errors during fork without triggering
compaction. This can be fixed by modifying the flags used in
mas_expected_entries() so that the compaction will be triggered in low
memory situations. Since mas_expected_entries() is only used during fork,
the extra argument does not need to be passed through.
Additionally, the two test_maple_tree test cases and one benchmark test
were altered to use the correct locking type so that allocations would not
trigger sleeping and thus fail. Testing was completed with lockdep atomic
sleep detection.
The additional locking change requires rwsem support additions to the
tools/ directory through the use of pthreads pthread_rwlock_t. With this
change test_maple_tree works in userspace, as a module, and in-kernel.
Users may notice that the system gave up early on attempting to start new
processes instead of attempting to reclaim memory.
Link: https://lkml.kernel.org/r/20230915093243epcms1p46fa00bbac1ab7b7dca94acb66c44c456@epcms1p4
Link: https://lkml.kernel.org/r/20231012155233.2272446-1-Liam.Howlett@oracle.com
Fixes:
54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: <jason.sim@samsung.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rik van Riel [Fri, 6 Oct 2023 03:59:07 +0000 (23:59 -0400)]
hugetlbfs: extend hugetlb_vma_lock to private VMAs
commit
bf4916922c60f43efaa329744b3eef539aa6a2b2 upstream.
Extend the locking scheme used to protect shared hugetlb mappings from
truncate vs page fault races, in order to protect private hugetlb mappings
(with resv_map) against MADV_DONTNEED.
Add a read-write semaphore to the resv_map data structure, and use that
from the hugetlb_vma_(un)lock_* functions, in preparation for closing the
race between MADV_DONTNEED and page faults.
Link: https://lkml.kernel.org/r/20231006040020.3677377-3-riel@surriel.com
Fixes:
04ada095dcfc ("hugetlb: don't delete vma_lock in hugetlb MADV_DONTNEED processing")
Signed-off-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gregory Price [Tue, 3 Oct 2023 14:48:56 +0000 (10:48 -0400)]
mm/migrate: fix do_pages_move for compat pointers
commit
229e2253766c7cdfe024f1fe280020cc4711087c upstream.
do_pages_move does not handle compat pointers for the page list.
correctly. Add in_compat_syscall check and appropriate get_user fetch
when iterating the page list.
It makes the syscall in compat mode (32-bit userspace, 64-bit kernel)
work the same way as the native 32-bit syscall again, restoring the
behavior before my broken commit
5b1b561ba73c ("mm: simplify
compat_sys_move_pages").
More specifically, my patch moved the parsing of the 'pages' array from
the main entry point into do_pages_stat(), which left the syscall
working correctly for the 'stat' operation (nodes = NULL), while the
'move' operation (nodes != NULL) is now missing the conversion and
interprets 'pages' as an array of 64-bit pointers instead of the
intended 32-bit userspace pointers.
It is possible that nobody noticed this bug because the few
applications that actually call move_pages are unlikely to run in
compat mode because of their large memory requirements, but this
clearly fixes a user-visible regression and should have been caught by
ltp.
Link: https://lkml.kernel.org/r/20231003144857.752952-1-gregory.price@memverge.com
Fixes:
5b1b561ba73c ("mm: simplify compat_sys_move_pages")
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kemeng Shi [Wed, 27 Sep 2023 09:44:01 +0000 (17:44 +0800)]
mm/page_alloc: correct start page when guard page debug is enabled
commit
61e21cf2d2c3cc5e60e8d0a62a77e250fccda62c upstream.
When guard page debug is enabled and set_page_guard returns success, we
miss to forward page to point to start of next split range and we will do
split unexpectedly in page range without target page. Move start page
update before set_page_guard to fix this.
As we split to wrong target page, then splited pages are not able to merge
back to original order when target page is put back and splited pages
except target page is not usable. To be specific:
Consider target page is the third page in buddy page with order 2.
| buddy-2 | Page | Target | Page |
After break down to target page, we will only set first page to Guard
because of bug.
| Guard | Page | Target | Page |
When we try put_page_back_buddy with target page, the buddy page of target
if neither guard nor buddy, Then it's not able to construct original page
with order 2
| Guard | Page | buddy-0 | Page |
All pages except target page is not in free list and is not usable.
Link: https://lkml.kernel.org/r/20230927094401.68205-1-shikemeng@huaweicloud.com
Fixes:
06be6ff3d2ec ("mm,hwpoison: rework soft offline for free pages")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rik van Riel [Fri, 6 Oct 2023 03:59:06 +0000 (23:59 -0400)]
hugetlbfs: clear resv_map pointer if mmap fails
commit
92fe9dcbe4e109a7ce6bab3e452210a35b0ab493 upstream.
Patch series "hugetlbfs: close race between MADV_DONTNEED and page fault", v7.
Malloc libraries, like jemalloc and tcalloc, take decisions on when to
call madvise independently from the code in the main application.
This sometimes results in the application page faulting on an address,
right after the malloc library has shot down the backing memory with
MADV_DONTNEED.
Usually this is harmless, because we always have some 4kB pages sitting
around to satisfy a page fault. However, with hugetlbfs systems often
allocate only the exact number of huge pages that the application wants.
Due to TLB batching, hugetlbfs MADV_DONTNEED will free pages outside of
any lock taken on the page fault path, which can open up the following
race condition:
CPU 1 CPU 2
MADV_DONTNEED
unmap page
shoot down TLB entry
page fault
fail to allocate a huge page
killed with SIGBUS
free page
Fix that race by extending the hugetlb_vma_lock locking scheme to also
cover private hugetlb mappings (with resv_map), and pulling the locking
from __unmap_hugepage_final_range into helper functions called from
zap_page_range_single. This ensures page faults stay locked out of the
MADV_DONTNEED VMA until the huge pages have actually been freed.
This patch (of 3):
Hugetlbfs leaves a dangling pointer in the VMA if mmap fails. This has
not been a problem so far, but other code in this patch series tries to
follow that pointer.
Link: https://lkml.kernel.org/r/20231006040020.3677377-1-riel@surriel.com
Link: https://lkml.kernel.org/r/20231006040020.3677377-2-riel@surriel.com
Fixes:
04ada095dcfc ("hugetlb: don't delete vma_lock in hugetlb MADV_DONTNEED processing")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Rik van Riel <riel@surriel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sebastian Ott [Fri, 29 Sep 2023 17:19:41 +0000 (10:19 -0700)]
mm: fix vm_brk_flags() to not bail out while holding lock
commit
e0f81ab1e4f42ffece6440dc78f583eb352b9a71 upstream.
Calling vm_brk_flags() with flags set other than VM_EXEC will exit the
function without releasing the mmap_write_lock.
Just do the sanity check before the lock is acquired. This doesn't fix an
actual issue since no caller sets a flag other than VM_EXEC.
Link: https://lkml.kernel.org/r/20230929171937.work.697-kees@kernel.org
Fixes:
2e7ce7d354f2 ("mm/mmap: change do_brk_flags() to expand existing VMA and add do_brk_munmap()")
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christopher Obbard [Fri, 13 Oct 2023 11:47:27 +0000 (12:47 +0100)]
arm64: dts: rockchip: Fix i2s0 pin conflict on ROCK Pi 4 boards
commit
8cd79b729e746cb167f1563d015a93fc0a079899 upstream.
Commit
91419ae0420f ("arm64: dts: rockchip: use BCLK to GPIO switch on
rk3399") modified i2s0 to switch the corresponding pins off when idle.
For the ROCK Pi 4 boards, this means that i2s0 has the following pinctrl
setting:
pinctrl-names = "bclk_on", "bclk_off";
pinctrl-0 = <&i2s0_2ch_bus>;
pinctrl-1 = <&i2s0_8ch_bus_bclk_off>;
Due to this change, i2s0 fails to probe on my Radxa ROCK 4SE and ROCK Pi
4B boards:
rockchip-pinctrl pinctrl: pin gpio3-29 already requested by leds; cannot claim for
ff880000.i2s
rockchip-pinctrl pinctrl: pin-125 (
ff880000.i2s) status -22
rockchip-pinctrl pinctrl: could not request pin 125 (gpio3-29) from group i2s0-8ch-bus-bclk-off on device rockchip-pinctrl
rockchip-i2s
ff880000.i2s: Error applying setting, reverse things back
rockchip-i2s
ff880000.i2s: bclk disable failed -22
A pin requested for i2s0_8ch_bus_bclk_off has already been requested by
user_led2, so whichever driver probes first will have the pin allocated.
The hardware uses 2-channel i2s so fix this error by setting pinctl-1 to
i2s0_2ch_bus_bclk_off which doesn't contain the pin allocated to user_led2.
I checked the schematics for all Radxa boards based on ROCK Pi 4 and this
change is compatible with all boards.
Fixes:
91419ae0420f ("arm64: dts: rockchip: use BCLK to GPIO switch on rk3399")
Signed-off-by: Christopher Obbard <chris.obbard@collabora.com>
Link: https://lore.kernel.org/r/20231013114737.494410-3-chris.obbard@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christopher Obbard [Fri, 13 Oct 2023 11:47:26 +0000 (12:47 +0100)]
arm64: dts: rockchip: Add i2s0-2ch-bus-bclk-off pins to RK3399
commit
3975e72b164dc8347a28dd0d5f11b346af534635 upstream.
Commit
0efaf8078393 ("arm64: dts: rockchip: add i2s0-2ch-bus pins on
rk3399") introduced a pinctl for i2s0 in two-channel mode. Commit
91419ae0420f ("arm64: dts: rockchip: use BCLK to GPIO switch on rk3399")
modified i2s0 to switch the corresponding pins off when idle.
Although an idle pinctrl node was added for i2s0 in 8-channel mode, a
similar idle pinctrl node for i2s0 in 2-channel mode was not added. Add
it.
Fixes:
91419ae0420f ("arm64: dts: rockchip: use BCLK to GPIO switch on rk3399")
Signed-off-by: Christopher Obbard <chris.obbard@collabora.com>
Link: https://lore.kernel.org/r/20231013114737.494410-2-chris.obbard@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Auger [Wed, 27 Sep 2023 14:05:44 +0000 (16:05 +0200)]
vhost: Allow null msg.size on VHOST_IOTLB_INVALIDATE
commit
ca50ec377c2e94b0a9f8735de2856cd0f13beab4 upstream.
Commit
e2ae38cf3d91 ("vhost: fix hung thread due to erroneous iotlb
entries") Forbade vhost iotlb msg with null size to prevent entries
with size = start = 0 and last = ULONG_MAX to end up in the iotlb.
Then commit
95932ab2ea07 ("vhost: allow batching hint without size")
only applied the check for VHOST_IOTLB_UPDATE and VHOST_IOTLB_INVALIDATE
message types to fix a regression observed with batching hit.
Still, the introduction of that check introduced a regression for
some users attempting to invalidate the whole ULONG_MAX range by
setting the size to 0. This is the case with qemu/smmuv3/vhost
integration which does not work anymore. It Looks safe to partially
revert the original commit and allow VHOST_IOTLB_INVALIDATE messages
with null size. vhost_iotlb_del_range() will compute a correct end
iova. Same for vhost_vdpa_iotlb_unmap().
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Fixes:
e2ae38cf3d91 ("vhost: fix hung thread due to erroneous iotlb entries")
Cc: stable@vger.kernel.org # v5.17+
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <
20230927140544.205088-1-eric.auger@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexandru Matei [Tue, 24 Oct 2023 19:17:42 +0000 (22:17 +0300)]
vsock/virtio: initialize the_virtio_vsock before using VQs
commit
53b08c4985158430fd6d035fb49443bada535210 upstream.
Once VQs are filled with empty buffers and we kick the host, it can send
connection requests. If the_virtio_vsock is not initialized before,
replies are silently dropped and do not reach the host.
virtio_transport_send_pkt() can queue packets once the_virtio_vsock is
set, but they won't be processed until vsock->tx_run is set to true. We
queue vsock->send_pkt_work when initialization finishes to send those
packets queued earlier.
Fixes:
0deab087b16a ("vsock/virtio: use RCU to avoid use-after-free on the_virtio_vsock")
Signed-off-by: Alexandru Matei <alexandru.matei@uipath.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20231024191742.14259-1-alexandru.matei@uipath.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xuan Zhuo [Tue, 10 Oct 2023 03:11:18 +0000 (11:11 +0800)]
virtio_pci: fix the common cfg map size
commit
061b39fdfe7fd98946e67637213bcbb10a318cca upstream.
The function vp_modern_map_capability() takes the size parameter,
which corresponds to the size of virtio_pci_common_cfg. As a result,
this indicates the size of memory area to map.
Now the size is the size of virtio_pci_common_cfg, but some feature(such
as the _F_RING_RESET) needs the virtio_pci_modern_common_cfg, so this
commit changes the size to the size of virtio_pci_modern_common_cfg.
Cc: stable@vger.kernel.org
Fixes:
0b50cece0b78 ("virtio_pci: introduce helper to get/set queue reset")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Message-Id: <
20231010031120.81272-3-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
zhenwei pi [Sat, 7 Oct 2023 06:43:09 +0000 (14:43 +0800)]
virtio-crypto: handle config changed by work queue
commit
fa2e6947aa8844f25f5bad0d8cd1a541d9bc83eb upstream.
MST pointed out: config change callback is also handled incorrectly
in this driver, it takes a mutex from interrupt context.
Handle config changed by work queue instead.
Cc: stable@vger.kernel.org
Cc: Gonglei (Arei) <arei.gonglei@huawei.com>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <
20231007064309.844889-1-pizhenwei@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maximilian Heyne [Mon, 11 Sep 2023 09:03:29 +0000 (09:03 +0000)]
virtio-mmio: fix memory leak of vm_dev
commit
fab7f259227b8f70aa6d54e1de1a1f5f4729041c upstream.
With the recent removal of vm_dev from devres its memory is only freed
via the callback virtio_mmio_release_dev. However, this only takes
effect after device_add is called by register_virtio_device. Until then
it's an unmanaged resource and must be explicitly freed on error exit.
This bug was discovered and resolved using Coverity Static Analysis
Security Testing (SAST) by Synopsys, Inc.
Cc: stable@vger.kernel.org
Fixes:
55c91fedd03d ("virtio-mmio: don't break lifecycle of vm_dev")
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Message-Id: <
20230911090328.40538-1-mheyne@amazon.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Gavin Shan [Thu, 31 Aug 2023 01:10:07 +0000 (11:10 +1000)]
virtio_balloon: Fix endless deflation and inflation on arm64
commit
07622bd415639e9709579f400afd19e7e9866e5e upstream.
The deflation request to the target, which isn't unaligned to the
guest page size causes endless deflation and inflation actions. For
example, we receive the flooding QMP events for the changes on memory
balloon's size after a deflation request to the unaligned target is
sent for the ARM64 guest, where we have 64KB base page size.
/home/gavin/sandbox/qemu.main/build/qemu-system-aarch64 \
-accel kvm -machine virt,gic-version=host -cpu host \
-smp maxcpus=8,cpus=8,sockets=2,clusters=2,cores=2,threads=1 \
-m 1024M,slots=16,maxmem=64G \
-object memory-backend-ram,id=mem0,size=512M \
-object memory-backend-ram,id=mem1,size=512M \
-numa node,nodeid=0,memdev=mem0,cpus=0-3 \
-numa node,nodeid=1,memdev=mem1,cpus=4-7 \
: \
-device virtio-balloon-pci,id=balloon0,bus=pcie.10
{ "execute" : "balloon", "arguments": { "value" :
1073672192 } }
{"return": {}}
{"timestamp": {"seconds":
1693272173, "microseconds": 88667}, \
"event": "BALLOON_CHANGE", "data": {"actual":
1073610752}}
{"timestamp": {"seconds":
1693272174, "microseconds": 89704}, \
"event": "BALLOON_CHANGE", "data": {"actual":
1073610752}}
{"timestamp": {"seconds":
1693272175, "microseconds": 90819}, \
"event": "BALLOON_CHANGE", "data": {"actual":
1073610752}}
{"timestamp": {"seconds":
1693272176, "microseconds": 91961}, \
"event": "BALLOON_CHANGE", "data": {"actual":
1073610752}}
{"timestamp": {"seconds":
1693272177, "microseconds": 93040}, \
"event": "BALLOON_CHANGE", "data": {"actual":
1073676288}}
{"timestamp": {"seconds":
1693272178, "microseconds": 94117}, \
"event": "BALLOON_CHANGE", "data": {"actual":
1073676288}}
{"timestamp": {"seconds":
1693272179, "microseconds": 95337}, \
"event": "BALLOON_CHANGE", "data": {"actual":
1073610752}}
{"timestamp": {"seconds":
1693272180, "microseconds": 96615}, \
"event": "BALLOON_CHANGE", "data": {"actual":
1073676288}}
{"timestamp": {"seconds":
1693272181, "microseconds": 97626}, \
"event": "BALLOON_CHANGE", "data": {"actual":
1073610752}}
{"timestamp": {"seconds":
1693272182, "microseconds": 98693}, \
"event": "BALLOON_CHANGE", "data": {"actual":
1073676288}}
{"timestamp": {"seconds":
1693272183, "microseconds": 99698}, \
"event": "BALLOON_CHANGE", "data": {"actual":
1073610752}}
{"timestamp": {"seconds":
1693272184, "microseconds": 100727}, \
"event": "BALLOON_CHANGE", "data": {"actual":
1073610752}}
{"timestamp": {"seconds":
1693272185, "microseconds": 90430}, \
"event": "BALLOON_CHANGE", "data": {"actual":
1073610752}}
{"timestamp": {"seconds":
1693272186, "microseconds": 102999}, \
"event": "BALLOON_CHANGE", "data": {"actual":
1073676288}}
:
<The similar QMP events repeat>
Fix it by aligning the target up to the guest page size, 64KB in this
specific case. With this applied, no flooding QMP events are observed
and the memory balloon's size can be stablizied to 0x3ffe0000 soon
after the deflation request is sent.
{ "execute" : "balloon", "arguments": { "value" :
1073672192 } }
{"return": {}}
{"timestamp": {"seconds":
1693273328, "microseconds": 793075}, \
"event": "BALLOON_CHANGE", "data": {"actual":
1073610752}}
{ "execute" : "query-balloon" }
{"return": {"actual":
1073610752}}
Cc: stable@vger.kernel.org
Signed-off-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Message-Id: <
20230831011007.1032822-1-gshan@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rodríguez Barbarin, José Javier [Tue, 11 Apr 2023 08:33:29 +0000 (10:33 +0200)]
mcb-lpc: Reallocate memory region to avoid memory overlapping
[ Upstream commit
2025b2ca8004c04861903d076c67a73a0ec6dfca ]
mcb-lpc requests a fixed-size memory region to parse the chameleon
table, however, if the chameleon table is smaller that the allocated
region, it could overlap with the IP Cores' memory regions.
After parsing the chameleon table, drop/reallocate the memory region
with the actual chameleon table size.
Co-developed-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com>
Signed-off-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com>
Signed-off-by: Javier Rodriguez <josejavier.rodriguez@duagon.com>
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Link: https://lore.kernel.org/r/20230411083329.4506-4-jth@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rodríguez Barbarin, José Javier [Tue, 11 Apr 2023 08:33:27 +0000 (10:33 +0200)]
mcb: Return actual parsed size when reading chameleon table
[ Upstream commit
a889c276d33d333ae96697510f33533f6e9d9591 ]
The function chameleon_parse_cells() returns the number of cells
parsed which has an undetermined size. This return value is only
used for error checking but the number of cells is never used.
Change return value to be number of bytes parsed to allow for
memory management improvements.
Co-developed-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com>
Signed-off-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com>
Signed-off-by: Javier Rodriguez <josejavier.rodriguez@duagon.com>
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Link: https://lore.kernel.org/r/20230411083329.4506-2-jth@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Krzysztof Kozlowski [Fri, 13 Oct 2023 14:57:05 +0000 (16:57 +0200)]
pinctrl: qcom: lpass-lpi: fix concurrent register updates
[ Upstream commit
c8befdc411e5fd1bf95a13e8744c8ca79b412bee ]
The Qualcomm LPASS LPI pin controller driver uses one lock for guarding
Read-Modify-Write code for slew rate registers. However the pin
configuration and muxing registers have exactly the same RMW code but
are not protected.
Pin controller framework does not provide locking here, thus it is
possible to trigger simultaneous change of pin configuration registers
resulting in non-atomic changes.
Protect from concurrent access by re-using the same lock used to cover
the slew rate register. Using the same lock instead of adding second
one will make more sense, once we add support for newer Qualcomm SoC,
where slew rate is configured in the same register as pin
configuration/muxing.
Fixes:
6e261d1090d6 ("pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver")
Cc: stable@vger.kernel.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231013145705.219954-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johan Hovold [Tue, 3 Oct 2023 15:55:56 +0000 (17:55 +0200)]
ASoC: codecs: wcd938x: fix runtime PM imbalance on remove
[ Upstream commit
3ebebb2c1eca92a15107b2d7aeff34196fd9e217 ]
Make sure to balance the runtime PM operations, including the disable
count, on driver unbind.
Fixes:
16572522aece ("ASoC: codecs: wcd938x-sdw: add SoundWire driver")
Cc: stable@vger.kernel.org # 5.14
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231003155558.27079-6-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johan Hovold [Tue, 3 Oct 2023 15:55:55 +0000 (17:55 +0200)]
ASoC: codecs: wcd938x: fix regulator leaks on probe errors
[ Upstream commit
69a026a2357ee69983690d07976de44ef26ee38a ]
Make sure to disable and free the regulators on probe errors and on
driver unbind.
Fixes:
16572522aece ("ASoC: codecs: wcd938x-sdw: add SoundWire driver")
Cc: stable@vger.kernel.org # 5.14
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231003155558.27079-5-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Krzysztof Kozlowski [Tue, 18 Apr 2023 07:46:30 +0000 (09:46 +0200)]
ASoC: codecs: wcd938x: Simplify with dev_err_probe
[ Upstream commit
60ba2fda5280528e70fa26b44e36d1530f6d1d7e ]
Replace dev_err() in probe() path with dev_err_probe() to:
1. Make code a bit simpler and easier to read,
2. Do not print messages on deferred probe.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230418074630.8681-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of:
69a026a2357e ("ASoC: codecs: wcd938x: fix regulator leaks on probe errors")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Uwe Kleine-König [Wed, 15 Mar 2023 15:05:48 +0000 (16:05 +0100)]
ASoC: codecs: wcd938x: Convert to platform remove callback returning void
[ Upstream commit
7cd686a59b36860511965882dad1f76df2c25766 ]
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-57-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of:
69a026a2357e ("ASoC: codecs: wcd938x: fix regulator leaks on probe errors")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ulf Hansson [Wed, 13 Sep 2023 11:29:21 +0000 (13:29 +0200)]
mmc: core: Fix error propagation for some ioctl commands
[ Upstream commit
f19c5a73e6f78d69efce66cfdce31148c76a61a6 ]
Userspace has currently no way of checking the internal R1 response error
bits for some commands. This is a problem for some commands, like RPMB for
example. Typically, we may detect that the busy completion has successfully
ended, while in fact the card did not complete the requested operation.
To fix the problem, let's always poll with CMD13 for these commands and
during the polling, let's also aggregate the R1 response bits. Before
completing the ioctl request, let's propagate the R1 response bits too.
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Co-developed-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230913112921.553019-1-ulf.hansson@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christian Loehle [Thu, 25 May 2023 09:56:04 +0000 (09:56 +0000)]
mmc: block: ioctl: do write error check for spi
[ Upstream commit
568898cbc8b570311b3b94a3202b8233f4168144 ]
SPI doesn't have the usual PROG path we can check for error bits
after moving back to TRAN. Instead it holds the line LOW until
completion. We can then check if the card shows any errors or
is in IDLE state, indicating the line is no longer LOW because
the card was reset.
Signed-off-by: Christian Loehle <cloehle@hyperstone.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/55920f880c9742f486f64aa44e25508e@hyperstone.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Stable-dep-of:
f19c5a73e6f7 ("mmc: core: Fix error propagation for some ioctl commands")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ulf Hansson [Mon, 13 Feb 2023 13:37:07 +0000 (14:37 +0100)]
mmc: core: Align to common busy polling behaviour for mmc ioctls
[ Upstream commit
51f5b3056790bc0518e49587996f1e6f3058cca9 ]
Let's align to the common busy polling behaviour for mmc ioctls, by
updating the below two corresponding parts, that comes into play when using
an R1B response for a command.
*) A command with an R1B response should be prepared by calling
mmc_prepare_busy_cmd(), which make us respects the host's busy timeout
constraints.
**) When an R1B response is being used and the host also supports HW busy
detection, we should skip to poll for busy completion.
Suggested-by: Christian Loehle <cloehle@hyperstone.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Christian Loehle <cloehle@hyperstone.com>
Link: https://lore.kernel.org/r/20230213133707.27857-1-ulf.hansson@linaro.org
Stable-dep-of:
f19c5a73e6f7 ("mmc: core: Fix error propagation for some ioctl commands")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Roman Kagan [Thu, 4 May 2023 12:00:42 +0000 (14:00 +0200)]
KVM: x86/pmu: Truncate counter value to allowed width on write
[ Upstream commit
b29a2acd36dd7a33c63f260df738fb96baa3d4f8 ]
Performance counters are defined to have width less than 64 bits. The
vPMU code maintains the counters in u64 variables but assumes the value
to fit within the defined width. However, for Intel non-full-width
counters (MSR_IA32_PERFCTRx) the value receieved from the guest is
truncated to 32 bits and then sign-extended to full 64 bits. If a
negative value is set, it's sign-extended to 64 bits, but then in
kvm_pmu_incr_counter() it's incremented, truncated, and compared to the
previous value for overflow detection.
That previous value is not truncated, so it always evaluates bigger than
the truncated new one, and a PMI is injected. If the PMI handler writes
a negative counter value itself, the vCPU never quits the PMI loop.
Turns out that Linux PMI handler actually does write the counter with
the value just read with RDPMC, so when no full-width support is exposed
via MSR_IA32_PERF_CAPABILITIES, and the guest initializes the counter to
a negative value, it locks up.
This has been observed in the field, for example, when the guest configures
atop to use perfevents and runs two instances of it simultaneously.
To address the problem, maintain the invariant that the counter value
always fits in the defined bit width, by truncating the received value
in the respective set_msr methods. For better readability, factor the
out into a helper function, pmc_write_counter(), shared by vmx and svm
parts.
Fixes:
9cd803d496e7 ("KVM: x86: Update vPMCs when retiring instructions")
Cc: stable@vger.kernel.org
Signed-off-by: Roman Kagan <rkagan@amazon.de>
Link: https://lore.kernel.org/all/20230504120042.785651-1-rkagan@amazon.de
Tested-by: Like Xu <likexu@tencent.com>
[sean: tweak changelog, s/set/write in the helper]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Greg Kroah-Hartman [Wed, 25 Oct 2023 10:03:17 +0000 (12:03 +0200)]
Linux 6.1.60
Link: https://lore.kernel.org/r/20231023104828.488041585@linuxfoundation.org
Tested-by: SeongJae Park <sj@kernel.org>
Tested-by: Ricardo B. Marliere <ricardo@marliere.net>
Tested-by: Allen Pais <apais@linux.microsoft.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthieu Baerts [Wed, 18 Oct 2023 18:23:56 +0000 (11:23 -0700)]
selftests: mptcp: join: no RST when rm subflow/addr
commit
2cfaa8b3b7aece3c7b13dd10db20dcea65875692 upstream.
Recently, we noticed that some RST were wrongly generated when removing
the initial subflow.
This patch makes sure RST are not sent when removing any subflows or any
addresses.
Fixes:
c2b2ae3925b6 ("mptcp: handle correctly disconnect() failures")
Cc: stable@vger.kernel.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-5-17ecb002e41d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthieu Baerts [Wed, 18 Oct 2023 18:23:52 +0000 (11:23 -0700)]
selftests: mptcp: join: correctly check for no RST
commit
b134a5805455d1886662a6516c965cdb9df9fbcc upstream.
The commit mentioned below was more tolerant with the number of RST seen
during a test because in some uncontrollable situations, multiple RST
can be generated.
But it was not taking into account the case where no RST are expected:
this validation was then no longer reporting issues for the 0 RST case
because it is not possible to have less than 0 RST in the counter. This
patch fixes the issue by adding a specific condition.
Fixes:
6bf41020b72b ("selftests: mptcp: update and extend fastclose test-cases")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-1-17ecb002e41d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geliang Tang [Wed, 18 Oct 2023 18:23:55 +0000 (11:23 -0700)]
mptcp: avoid sending RST when closing the initial subflow
commit
14c56686a64c65ba716ff48f1f4b19c85f4cb2a9 upstream.
When closing the first subflow, the MPTCP protocol unconditionally
calls tcp_disconnect(), which in turn generates a reset if the subflow
is established.
That is unexpected and different from what MPTCP does with MPJ
subflows, where resets are generated only on FASTCLOSE and other edge
scenarios.
We can't reuse for the first subflow the same code in place for MPJ
subflows, as MPTCP clean them up completely via a tcp_close() call,
while must keep the first subflow socket alive for later re-usage, due
to implementation constraints.
This patch adds a new helper __mptcp_subflow_disconnect() that
encapsulates, a logic similar to tcp_close, issuing a reset only when
the MPTCP_CF_FASTCLOSE flag is set, and performing a clean shutdown
otherwise.
Fixes:
c2b2ae3925b6 ("mptcp: handle correctly disconnect() failures")
Cc: stable@vger.kernel.org
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-4-17ecb002e41d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kees Cook [Wed, 11 Oct 2023 16:31:44 +0000 (09:31 -0700)]
Bluetooth: hci_sock: Correctly bounds check and pad HCI_MON_NEW_INDEX name
commit
cb3871b1cd135a6662b732fbc6b3db4afcdb4a64 upstream.
The code pattern of memcpy(dst, src, strlen(src)) is almost always
wrong. In this case it is wrong because it leaves memory uninitialized
if it is less than sizeof(ni->name), and overflows ni->name when longer.
Normally strtomem_pad() could be used here, but since ni->name is a
trailing array in struct hci_mon_new_index, compilers that don't support
-fstrict-flex-arrays=3 can't tell how large this array is via
__builtin_object_size(). Instead, open-code the helper and use sizeof()
since it will work correctly.
Additionally mark ni->name as __nonstring since it appears to not be a
%NUL terminated C string.
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Edward AD <twuufnxlz@gmail.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: linux-bluetooth@vger.kernel.org
Cc: netdev@vger.kernel.org
Fixes:
18f547f3fc07 ("Bluetooth: hci_sock: fix slab oob read in create_monitor_event")
Link: https://lore.kernel.org/lkml/202310110908.F2639D3276@keescook/
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Edward AD [Tue, 10 Oct 2023 05:36:57 +0000 (13:36 +0800)]
Bluetooth: hci_sock: fix slab oob read in create_monitor_event
commit
18f547f3fc074500ab5d419cf482240324e73a7e upstream.
When accessing hdev->name, the actual string length should prevail
Reported-by: syzbot+c90849c50ed209d77689@syzkaller.appspotmail.com
Fixes:
dcda165706b9 ("Bluetooth: hci_core: Fix build warnings")
Signed-off-by: Edward AD <twuufnxlz@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jakub Kicinski [Wed, 18 Oct 2023 01:38:16 +0000 (18:38 -0700)]
net: move altnames together with the netdevice
commit
8e15aee621618a3ee3abecaf1fd8c1428098b7ef upstream.
The altname nodes are currently not moved to the new netns
when netdevice itself moves:
[ ~]# ip netns add test
[ ~]# ip -netns test link add name eth0 type dummy
[ ~]# ip -netns test link property add dev eth0 altname some-name
[ ~]# ip -netns test link show dev some-name
2: eth0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 1e:67:ed:19:3d:24 brd ff:ff:ff:ff:ff:ff
altname some-name
[ ~]# ip -netns test link set dev eth0 netns 1
[ ~]# ip link
...
3: eth0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 02:40:88:62:ec:b8 brd ff:ff:ff:ff:ff:ff
altname some-name
[ ~]# ip li show dev some-name
Device "some-name" does not exist.
Remove them from the hash table when device is unlisted
and add back when listed again.
Fixes:
36fbf1e52bd3 ("net: rtnetlink: add linkprop commands to add and delete alternative ifnames")
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tony Lindgren [Wed, 13 Sep 2023 06:04:29 +0000 (09:04 +0300)]
phy: mapphone-mdm6600: Fix pinctrl_pm handling for sleep pins
[ Upstream commit
3b384cc74b00b5ac21d18e4c1efc3c1da5300971 ]
Looks like the driver sleep pins configuration is unusable. Adding the
sleep pins causes the usb phy to not respond. We need to use the default
pins in probe, and only set sleep pins at phy_mdm6600_device_power_off().
As the modem can also be booted to a serial port mode for firmware
flashing, let's make the pin changes limited to probe and remove. For
probe, we get the default pins automatically. We only need to set the
sleep pins in phy_mdm6600_device_power_off() to prevent the modem from
waking up because the gpio line glitches.
If it turns out that we need a separate state for phy_mdm6600_power_on()
and phy_mdm6600_power_off(), we can use the pinctrl idle state.
Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Fixes:
2ad2af081622 ("phy: mapphone-mdm6600: Improve phy related runtime PM calls")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230913060433.48373-3-tony@atomide.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tony Lindgren [Wed, 13 Sep 2023 06:04:28 +0000 (09:04 +0300)]
phy: mapphone-mdm6600: Fix runtime PM for remove
[ Upstream commit
b99e0ba9633af51638e5ee1668da2e33620c134f ]
Otherwise we will get an underflow on remove.
Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Fixes:
f7f50b2a7b05 ("phy: mapphone-mdm6600: Add runtime PM support for n_gsm on USB suspend")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230913060433.48373-2-tony@atomide.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tony Lindgren [Wed, 13 Sep 2023 06:04:27 +0000 (09:04 +0300)]
phy: mapphone-mdm6600: Fix runtime disable on probe
[ Upstream commit
719606154c7033c068a5d4c1dc5f9163b814b3c8 ]
Commit
d644e0d79829 ("phy: mapphone-mdm6600: Fix PM error handling in
phy_mdm6600_probe") caused a regression where we now unconditionally
disable runtime PM at the end of the probe while it is only needed on
errors.
Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Fixes:
d644e0d79829 ("phy: mapphone-mdm6600: Fix PM error handling in phy_mdm6600_probe")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20230913060433.48373-1-tony@atomide.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Haibo Chen [Tue, 17 Oct 2023 10:42:36 +0000 (18:42 +0800)]
gpio: vf610: mask the gpio irq in system suspend and support wakeup
[ Upstream commit
430232619791e7de95191f2cd8ebaa4c380d17d0 ]
Add flag IRQCHIP_MASK_ON_SUSPEND to make sure gpio irq is masked on
suspend, if lack this flag, current irq arctitecture will not mask
the irq, and these unmasked gpio irq will wrongly wakeup the system
even they are not config as wakeup source.
Also add flag IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND to make sure the gpio
irq which is configed as wakeup source can work as expect.
Fixes:
7f2691a19627 ("gpio: vf610: add gpiolib/IRQ chip driver for Vybrid")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexander Stein [Wed, 15 Feb 2023 09:52:49 +0000 (10:52 +0100)]
gpio: vf610: make irq_chip immutable
[ Upstream commit
e6ef4f8ede09f4af7cde000717b349b50bc62576 ]
Since recently, the kernel is nagging about mutable irq_chips:
"not an immutable chip, please consider fixing it!"
Drop the unneeded copy, flag it as IRQCHIP_IMMUTABLE, add the new
helper functions and call the appropriate gpiolib functions.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Stable-dep-of:
430232619791 ("gpio: vf610: mask the gpio irq in system suspend and support wakeup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Francis Laniel [Fri, 20 Oct 2023 10:42:49 +0000 (13:42 +0300)]
tracing/kprobes: Return EADDRNOTAVAIL when func matches several symbols
[ Upstream commit
b022f0c7e404887a7c5229788fc99eff9f9a80d5 ]
When a kprobe is attached to a function that's name is not unique (is
static and shares the name with other functions in the kernel), the
kprobe is attached to the first function it finds. This is a bug as the
function that it is attaching to is not necessarily the one that the
user wants to attach to.
Instead of blindly picking a function to attach to what is ambiguous,
error with EADDRNOTAVAIL to let the user know that this function is not
unique, and that the user must use another unique function with an
address offset to get to the function they want to attach to.
Link: https://lore.kernel.org/all/20231020104250.9537-2-flaniel@linux.microsoft.com/
Cc: stable@vger.kernel.org
Fixes:
413d37d1eb69 ("tracing: Add kprobe-based event tracer")
Suggested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Francis Laniel <flaniel@linux.microsoft.com>
Link: https://lore.kernel.org/lkml/20230819101105.b0c104ae4494a7d1f2eea742@kernel.org/
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhen Lei [Wed, 2 Nov 2022 08:49:17 +0000 (16:49 +0800)]
kallsyms: Add helper kallsyms_on_each_match_symbol()
[ Upstream commit
4dc533e0f2c04174e1ae4aa98e7cffc1c04b9998 ]
Function kallsyms_on_each_symbol() traverses all symbols and submits each
symbol to the hook 'fn' for judgment and processing. For some cases, the
hook actually only handles the matched symbol, such as livepatch.
Because all symbols are currently sorted by name, all the symbols with the
same name are clustered together. Function kallsyms_lookup_names() gets
the start and end positions of the set corresponding to the specified
name. So we can easily and quickly traverse all the matches.
The test results are as follows (twice): (x86)
kallsyms_on_each_match_symbol: 7454, 7984
kallsyms_on_each_symbol :
11733809,
11785803
kallsyms_on_each_match_symbol() consumes only 0.066% of
kallsyms_on_each_symbol()'s time. In other words, 1523x better
performance.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Stable-dep-of:
b022f0c7e404 ("tracing/kprobes: Return EADDRNOTAVAIL when func matches several symbols")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhen Lei [Wed, 2 Nov 2022 08:49:16 +0000 (16:49 +0800)]
kallsyms: Reduce the memory occupied by kallsyms_seqs_of_names[]
[ Upstream commit
19bd8981dc2ee35fdc81ab1b0104b607c917d470 ]
kallsyms_seqs_of_names[] records the symbol index sorted by address, the
maximum value in kallsyms_seqs_of_names[] is the number of symbols. And
2^24 =
16777216, which means that three bytes are enough to store the
index. This can help us save (1 * kallsyms_num_syms) bytes of memory.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Stable-dep-of:
b022f0c7e404 ("tracing/kprobes: Return EADDRNOTAVAIL when func matches several symbols")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Wed, 17 May 2023 20:20:07 +0000 (22:20 +0200)]
serial: 8250: omap: convert to modern PM ops
commit
ae62c49c0ceff20dc7c1fad4a5b8f91d64b4f628 upstream.
The new uart_write() function is only called from suspend/resume code, causing
a build warning when those are left out:
drivers/tty/serial/8250/8250_omap.c:169:13: error: 'uart_write' defined but not used [-Werror=unused-function]
Remove the #ifdefs and use the modern pm_ops/pm_sleep_ops and their wrappers
to let the compiler see where it's used but still drop the dead code.
Fixes:
398cecc24846 ("serial: 8250: omap: Fix imprecise external abort for omap_8250_pm()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20230517202012.634386-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geert Uytterhoeven [Mon, 15 May 2023 06:57:06 +0000 (08:57 +0200)]
serial: 8250: omap: Move uart_write() inside PM section
commit
c53aab20762255ee03e65dd66b3cba3887ad39d1 upstream.
If CONFIG_PM is not set (e.g. m68k/allmodconfig):
drivers/tty/serial/8250/8250_omap.c:169:13: error: ‘uart_write’ defined but not used [-Werror=unused-function]
169 | static void uart_write(struct omap8250_priv *priv, u32 reg, u32 val)
| ^~~~~~~~~~
Fix tis by moving uart_write() inside the existing section protected
by #ifdef CONFIG_PM.
Reported-by: noreply@ellerman.id.au
Link: http://kisskb.ellerman.id.au/kisskb/buildresult/14925095/
Fixes:
398cecc24846e867 ("serial: 8250: omap: Fix imprecise external abort for omap_8250_pm()")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20230515065706.1723477-1-geert@linux-m68k.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stephen Boyd [Mon, 2 Oct 2023 23:54:06 +0000 (16:54 -0700)]
drm/bridge: ti-sn65dsi86: Associate DSI device lifetime with auxiliary device
[ Upstream commit
7b821db95140e2c118567aee22a78bf85f3617e0 ]
The kernel produces a warning splat and the DSI device fails to register
in this driver if the i2c driver probes, populates child auxiliary
devices, and then somewhere in ti_sn_bridge_probe() a function call
returns -EPROBE_DEFER. When the auxiliary driver probe defers, the dsi
device created by devm_mipi_dsi_device_register_full() is left
registered because the devm managed device used to manage the lifetime
of the DSI device is the parent i2c device, not the auxiliary device
that is being probed.
Associate the DSI device created and managed by this driver to the
lifetime of the auxiliary device, not the i2c device, so that the DSI
device is removed when the auxiliary driver unbinds. Similarly change
the device pointer used for dev_err_probe() so the deferred probe errors
are associated with the auxiliary device instead of the parent i2c
device so we can narrow down future problems faster.
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Maxime Ripard <maxime@cerno.tech>
Fixes:
c3b75d4734cb ("drm/bridge: sn65dsi86: Register and attach our DSI device at probe")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231002235407.769399-1-swboyd@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Thu, 5 Oct 2023 14:00:24 +0000 (17:00 +0300)]
ASoC: pxa: fix a memory leak in probe()
[ Upstream commit
aa6464edbd51af4a2f8db43df866a7642b244b5f ]
Free the "priv" pointer before returning the error code.
Fixes:
90eb6b59d311 ("ASoC: pxa-ssp: add support for an external clock in devicetree")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/84ac2313-1420-471a-b2cb-3269a2e12a7c@moroto.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Haibo Chen [Wed, 18 Oct 2023 09:00:17 +0000 (11:00 +0200)]
gpio: vf610: set value before the direction to avoid a glitch
commit
fc363413ef8ea842ae7a99e3caf5465dafdd3a49 upstream.
We found a glitch when configuring the pad as output high. To avoid this
glitch, move the data value setting before direction config in the
function vf610_gpio_direction_output().
Fixes:
659d8a62311f ("gpio: vf610: add imx7ulp support")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
[Bartosz: tweak the commit message]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Tue, 17 Oct 2023 09:07:25 +0000 (11:07 +0200)]
platform/x86: asus-wmi: Map 0x2a code, Ignore 0x2b and 0x2c events
commit
235985d1763f7aba92c1c64e5f5aaec26c2c9b18 upstream.
Newer Asus laptops send the following new WMI event codes when some
of the F1 - F12 "media" hotkeys are pressed:
0x2a Screen Capture
0x2b PrintScreen
0x2c CapsLock
Map 0x2a to KEY_SELECTIVE_SCREENSHOT mirroring how similar hotkeys
are mapped on other laptops.
PrintScreem and CapsLock are also reported as normal PS/2 keyboard events,
map these event codes to KE_IGNORE to avoid "Unknown key code 0x%x\n" log
messages.
Reported-by: James John <me@donjajo.com>
Closes: https://lore.kernel.org/platform-driver-x86/
a2c441fe-457e-44cf-a146-
0ecd86b037cf@donjajo.com/
Closes: https://bbs.archlinux.org/viewtopic.php?pid=2123716
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231017090725.38163-4-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Tue, 17 Oct 2023 09:07:24 +0000 (11:07 +0200)]
platform/x86: asus-wmi: Only map brightness codes when using asus-wmi backlight control
commit
a5b92be2482e5f9ef30be4e4cda12ed484381493 upstream.
Older Asus laptops change the backlight level themselves and then send
WMI events with different codes for different backlight levels.
The asus-wmi.c code maps the entire range of codes reported on
brightness down keypresses to an internal ASUS_WMI_BRN_DOWN code:
define NOTIFY_BRNUP_MIN 0x11
define NOTIFY_BRNUP_MAX 0x1f
define NOTIFY_BRNDOWN_MIN 0x20
define NOTIFY_BRNDOWN_MAX 0x2e
if (code >= NOTIFY_BRNUP_MIN && code <= NOTIFY_BRNUP_MAX)
code = ASUS_WMI_BRN_UP;
else if (code >= NOTIFY_BRNDOWN_MIN && code <= NOTIFY_BRNDOWN_MAX)
code = ASUS_WMI_BRN_DOWN;
This mapping is causing issues on new laptop models which actually
send 0x2b events for printscreen presses and 0x2c events for
capslock presses, which get translated into spurious brightness-down
presses.
This mapping is really only necessary when asus-wmi has registered
a backlight-device for backlight control. In this case the mapping
was used to decide to filter out the keypresss since in this case
the firmware has already modified the brightness itself and instead
of reporting a keypress asus-wmi will just report the new brightness
value to userspace.
OTOH when the firmware does not adjust the brightness itself then
it seems to always report 0x2e for brightness-down presses and
0x2f for brightness up presses independent of the actual brightness
level. So in this case the mapping of the code is not necessary
and this translation actually leads to spurious brightness-down
presses being send to userspace when pressing printscreen or capslock.
Modify asus_wmi_handle_event_code() to only do the mapping
when using asus-wmi backlight control to fix the spurious
brightness-down presses.
Reported-by: James John <me@donjajo.com>
Closes: https://lore.kernel.org/platform-driver-x86/
a2c441fe-457e-44cf-a146-
0ecd86b037cf@donjajo.com/
Closes: https://bbs.archlinux.org/viewtopic.php?pid=2123716
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231017090725.38163-3-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Tue, 17 Oct 2023 09:07:23 +0000 (11:07 +0200)]
platform/x86: asus-wmi: Change ASUS_WMI_BRN_DOWN code from 0x20 to 0x2e
commit
f37cc2fc277b371fc491890afb7d8a26e36bb3a1 upstream.
Older Asus laptops change the backlight level themselves and then send
WMI events with different codes for different backlight levels.
The asus-wmi.c code maps the entire range of codes reported on
brightness down keypresses to an internal ASUS_WMI_BRN_DOWN code:
define NOTIFY_BRNUP_MIN 0x11
define NOTIFY_BRNUP_MAX 0x1f
define NOTIFY_BRNDOWN_MIN 0x20
define NOTIFY_BRNDOWN_MAX 0x2e
if (code >= NOTIFY_BRNUP_MIN && code <= NOTIFY_BRNUP_MAX)
code = ASUS_WMI_BRN_UP;
else if (code >= NOTIFY_BRNDOWN_MIN && code <= NOTIFY_BRNDOWN_MAX)
code = ASUS_WMI_BRN_DOWN;
Before this commit all the NOTIFY_BRNDOWN_MIN - NOTIFY_BRNDOWN_MAX
aka 0x20 - 0x2e events were mapped to 0x20.
This mapping is causing issues on new laptop models which actually
send 0x2b events for printscreen presses and 0x2c events for
capslock presses, which get translated into spurious brightness-down
presses.
The plan is disable the 0x11-0x2e special mapping on laptops
where asus-wmi does not register a backlight-device to avoid
the spurious brightness-down keypresses. New laptops always send
0x2e for brightness-down presses, change the special internal
ASUS_WMI_BRN_DOWN value from 0x20 to 0x2e to match this in
preparation for fixing the spurious brightness-down presses.
This change does not have any functional impact since all
of 0x20 - 0x2e is mapped to ASUS_WMI_BRN_DOWN first and only
then checked against the keymap code and the new 0x2e
value is still in the 0x20 - 0x2e range.
Reported-by: James John <me@donjajo.com>
Closes: https://lore.kernel.org/platform-driver-x86/
a2c441fe-457e-44cf-a146-
0ecd86b037cf@donjajo.com/
Closes: https://bbs.archlinux.org/viewtopic.php?pid=2123716
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231017090725.38163-2-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Srinivas Pandruvada [Wed, 4 Oct 2023 18:19:15 +0000 (11:19 -0700)]
platform/x86: intel-uncore-freq: Conditionally create attribute for read frequency
commit
4d73c6772ab771cbbe7e46a73e7c78ba490350fa upstream.
When the current uncore frequency can't be read, don't create attribute
"current_freq_khz" as any read will fail later. Some user space
applications like turbostat fail to continue with the failure. So, check
error during attribute creation.
Fixes:
414eef27283a ("platform/x86/intel/uncore-freq: Display uncore current frequency")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231004181915.1887913-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Armin Wolf [Sat, 14 Oct 2023 23:54:49 +0000 (01:54 +0200)]
platform/surface: platform_profile: Propagate error if profile registration fails
commit
fe0e04cf66a12ffe6d1b43725ddaabd5599d024f upstream.
If platform_profile_register() fails, the driver does not propagate
the error, but instead probes successfully. This means when the driver
unbinds, the a warning might be issued by platform_profile_remove().
Fix this by propagating the error back to the caller of
surface_platform_profile_probe().
Compile-tested only.
Fixes:
b78b4982d763 ("platform/surface: Add platform profile driver")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Tested-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20231014235449.288702-1-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dinghao Liu [Thu, 21 Sep 2023 07:14:12 +0000 (15:14 +0800)]
s390/cio: fix a memleak in css_alloc_subchannel
commit
63e8b94ad1840f02462633abdb363397f56bc642 upstream.
When dma_set_coherent_mask() fails, sch->lock has not been
freed, which is allocated in css_sch_create_locks(), leading
to a memleak.
Fixes:
4520a91a976e ("s390/cio: use dma helpers for setting masks")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Message-Id: <
20230921071412.13806-1-dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/linux-s390/bd38baa8-7b9d-4d89-9422-7e943d626d6e@linux.ibm.com/
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Francis Laniel [Fri, 20 Oct 2023 10:42:50 +0000 (13:42 +0300)]
selftests/ftrace: Add new test case which checks non unique symbol
commit
03b80ff8023adae6780e491f66e932df8165e3a0 upstream.
If name_show() is non unique, this test will try to install a kprobe on this
function which should fail returning EADDRNOTAVAIL.
On kernel where name_show() is not unique, this test is skipped.
Link: https://lore.kernel.org/all/20231020104250.9537-3-flaniel@linux.microsoft.com/
Cc: stable@vger.kernel.org
Signed-off-by: Francis Laniel <flaniel@linux.microsoft.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Niklas Schnelle [Tue, 17 Oct 2023 13:37:29 +0000 (15:37 +0200)]
s390/pci: fix iommu bitmap allocation
commit
c1ae1c59c8c6e0b66a718308c623e0cb394dab6b upstream.
Since the fixed commits both zdev->iommu_bitmap and zdev->lazy_bitmap
are allocated as vzalloc(zdev->iommu_pages / 8). The problem is that
zdev->iommu_bitmap is a pointer to unsigned long but the above only
yields an allocation that is a multiple of sizeof(unsigned long) which
is 8 on s390x if the number of IOMMU pages is a multiple of 64.
This in turn is the case only if the effective IOMMU aperture is
a multiple of 64 * 4K = 256K. This is usually the case and so didn't
cause visible issues since both the virt_to_phys(high_memory) reduced
limit and hardware limits use nice numbers.
Under KVM, and in particular with QEMU limiting the IOMMU aperture to
the vfio DMA limit (default 65535), it is possible for the reported
aperture not to be a multiple of 256K however. In this case we end up
with an iommu_bitmap whose allocation is not a multiple of
8 causing bitmap operations to access it out of bounds.
Sadly we can't just fix this in the obvious way and use bitmap_zalloc()
because for large RAM systems (tested on 8 TiB) the zdev->iommu_bitmap
grows too large for kmalloc(). So add our own bitmap_vzalloc() wrapper.
This might be a candidate for common code, but this area of code will
be replaced by the upcoming conversion to use the common code DMA API on
s390 so just add a local routine.
Fixes:
224593215525 ("s390/pci: use virtual memory for iommu bitmap")
Fixes:
13954fd6913a ("s390/pci_dma: improve lazy flush for unmap")
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Zijlstra [Wed, 18 Oct 2023 11:56:54 +0000 (13:56 +0200)]
perf: Disallow mis-matched inherited group reads
commit
32671e3799ca2e4590773fd0e63aaa4229e50c06 upstream.
Because group consistency is non-atomic between parent (filedesc) and children
(inherited) events, it is possible for PERF_FORMAT_GROUP read() to try and sum
non-matching counter groups -- with non-sensical results.
Add group_generation to distinguish the case where a parent group removes and
adds an event and thus has the same number, but a different configuration of
events as inherited groups.
This became a problem when commit
fa8c269353d5 ("perf/core: Invert
perf_read_group() loops") flipped the order of child_list and sibling_list.
Previously it would iterate the group (sibling_list) first, and for each
sibling traverse the child_list. In this order, only the group composition of
the parent is relevant. By flipping the order the group composition of the
child (inherited) events becomes an issue and the mis-match in group
composition becomes evident.
That said; even prior to this commit, while reading of a group that is not
equally inherited was not broken, it still made no sense.
(Ab)use ECHILD as error return to indicate issues with child process group
composition.
Fixes:
fa8c269353d5 ("perf/core: Invert perf_read_group() loops")
Reported-by: Budimir Markovic <markovicbudimir@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20231018115654.GK33217@noisy.programming.kicks-ass.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Puliang Lu [Mon, 16 Oct 2023 07:36:16 +0000 (15:36 +0800)]
USB: serial: option: add Fibocom to DELL custom modem FM101R-GL
commit
52480e1f1a259c93d749ba3961af0bffedfe7a7a upstream.
Update the USB serial option driver support for the Fibocom
FM101R-GL LTE modules as there are actually several different variants.
- VID:PID 413C:8213, FM101R-GL are laptop M.2 cards (with
MBIM interfaces for Linux)
- VID:PID 413C:8215, FM101R-GL ESIM are laptop M.2 cards (with
MBIM interface for Linux)
0x8213: mbim, tty
0x8215: mbim, tty
T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
P: Vendor=413c ProdID=8213 Rev= 5.04
S: Manufacturer=Fibocom Wireless Inc.
S: Product=Fibocom FM101-GL Module
S: SerialNumber=
a3b7cbf0
C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=896mA
A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=(none)
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
P: Vendor=413c ProdID=8215 Rev= 5.04
S: Manufacturer=Fibocom Wireless Inc.
S: Product=Fibocom FM101-GL Module
S: SerialNumber=
a3b7cbf0
C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=896mA
A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=(none)
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
Signed-off-by: Puliang Lu <puliang.lu@fibocom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benoît Monin [Mon, 2 Oct 2023 15:51:40 +0000 (17:51 +0200)]
USB: serial: option: add entry for Sierra EM9191 with new firmware
commit
064f6e2ba9eb59b2c87b866e1e968e79ccedf9dd upstream.
Following a firmware update of the modem, the interface for the AT
command port changed, so add it back.
T: Bus=08 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 2 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
P: Vendor=1199 ProdID=90d3 Rev=00.06
S: Manufacturer=Sierra Wireless, Incorporated
S: Product=Sierra Wireless EM9191
S: SerialNumber=xxxxxxxxxxxxxxxx
C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=896mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=(none)
I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
Signed-off-by: Benoît Monin <benoit.monin@gmx.fr>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fabio Porcedda [Tue, 5 Sep 2023 07:37:24 +0000 (09:37 +0200)]
USB: serial: option: add Telit LE910C4-WWX 0x1035 composition
commit
6a7be48e9bd18d309ba25c223a27790ad1bf0fa3 upstream.
Add support for the following Telit LE910C4-WWX composition:
0x1035: TTY, TTY, ECM
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=1035 Rev=00.00
S: Manufacturer=Telit
S: Product=LE910C4-WWX
S: SerialNumber=
e1b117c7
C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
I: If#= 3 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>