Michal Schmidt [Fri, 2 Dec 2011 10:32:52 +0000 (11:32 +0100)]
rc-local: order after network.target
As suggested by Bill Nottingham: rc.local is often used for frobbing the
network.
https://bugzilla.redhat.com/show_bug.cgi?id=754789
Michal Schmidt [Fri, 2 Dec 2011 10:32:04 +0000 (11:32 +0100)]
rc-local: no need to check if the script is executable
rc-local.service is pulled in by a generator only if the script is
executable. No need to check again.
Michal Schmidt [Fri, 2 Dec 2011 09:18:46 +0000 (10:18 +0100)]
add a generator to pull rc-local.service in
rc-local.service acts as an ordering barrier even if its condition is
false, because conditions are evaluated when the service is about to be
started.
To avoid the ordering barrier in a legacy-free system, add a generator
to pull rc-local.service into the transaction only if the script is
executable.
If/when we rewrite SysV compatibility into a generator, this one can become
a part of it.
Michal Schmidt [Wed, 30 Nov 2011 10:06:35 +0000 (11:06 +0100)]
man: document the PassCred option
Michal Schmidt [Wed, 30 Nov 2011 08:37:13 +0000 (09:37 +0100)]
syslog: use PassCred=yes for the /dev/log socket
Both kmsg-syslogd and the real syslog service want to receive
SCM_CREDENTIALS. With socket activation it is too late to set
SO_PASSCRED in the services.
Michal Schmidt [Tue, 29 Nov 2011 22:14:36 +0000 (23:14 +0100)]
shutdownd: use PassCred=yes in the socket unit
Since Linux 3.2 in order to receive SCM_CREDENTIALS it is not sufficient
to set SO_PASSCRED just before recvmsg(). The option has to be already
set when the sender sends the message.
With socket activation it is too late to set the option in the service.
It must be set on the socket right from the start.
See the kernel commit:
16e57262 af_unix: dont send SCM_CREDENTIALS by default
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=757628
Michal Schmidt [Tue, 29 Nov 2011 21:15:41 +0000 (22:15 +0100)]
socket: add option for SO_PASSCRED
Add an option to enable SO_PASSCRED for unix sockets.
Michal Schmidt [Sat, 19 Nov 2011 01:47:09 +0000 (02:47 +0100)]
let mount and swap units log to the configured defaults
Related-to: https://bugzilla.redhat.com/show_bug.cgi?id=750032
Michal Schmidt [Sat, 19 Nov 2011 00:17:46 +0000 (01:17 +0100)]
pam-module: treat "cron" in PAM_TTY as empty tty
cron sets PAM_TTY to "cron" and it has been doing it for a long time.
It cannot be changed because user configurations may depend on it.
https://bugzilla.redhat.com/show_bug.cgi?id=727315
Michal Schmidt [Sat, 19 Nov 2011 00:14:11 +0000 (01:14 +0100)]
pam-module: use the correct session type "unspecified"
logind does not understand "other".
Michal Schmidt [Wed, 16 Nov 2011 23:21:16 +0000 (00:21 +0100)]
execute: log errors from "sd(EXEC)"
To give the administrator more hints about failures occuring in spawning
of commands than just the exit code, log the strerror.
All fds are closed, so reopen the log.
Related-to: https://bugzilla.redhat.com/show_bug.cgi?id=752901
Michal Schmidt [Wed, 16 Nov 2011 23:16:22 +0000 (00:16 +0100)]
execute: make setup_pam() return -errno when possible
The only caller currently checks if the result is non-zero,
so nothing changes there.
Michal Schmidt [Wed, 16 Nov 2011 22:45:01 +0000 (23:45 +0100)]
execute: avoid logging to closed fds
Several functions called from the "sd(EXEC)" process try to log messages
when all the file descriptors are already closed, including the logging
ones. The logging functions do not expect their fds to be closed and
they hit an assertion failure. The failure wants to be logged too,
so there is an infinite recursion, ended by a SIGSEGV.
When we close all fds, we must let log.c know about it.
Thomas Jarosch [Wed, 9 Nov 2011 19:48:31 +0000 (20:48 +0100)]
Fix same expression on both sides of '&&'
The code should probably look like the statements above it.
Please verify, I just detected it using cppcheck.
Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
Michal Schmidt [Fri, 11 Nov 2011 09:48:17 +0000 (10:48 +0100)]
man: fix typo in sd_notify
Noticed by guzu.
Michal Schmidt [Thu, 10 Nov 2011 11:53:39 +0000 (12:53 +0100)]
job: colored status messages on boot
The lack or green/red status marks on boot has been described by some
users as "critical", "dramatic", "dealbreaker", "showstopper". Seriously.
Michal Schmidt [Thu, 10 Nov 2011 08:55:47 +0000 (09:55 +0100)]
service: don't warn if the pidfile still exists after SIGCHLD
A service that drops its privileges may not be able to remove it when it
exits. The stale pidfile is not a problem as long as the service
carefully recognizes it on its next start.
systemd would produce a warning after the service exits:
PID ... read from file ... does not exist. Your service or init
script might be broken.
Silence the warning in this case. Still warn if this error is detected
when loading the pidfile after service start.
Noticed by Miroslav Lichvar in
https://bugzilla.redhat.com/show_bug.cgi?id=752396
Michal Schmidt [Wed, 9 Nov 2011 09:10:38 +0000 (10:10 +0100)]
units/suse: let rc-local.service log to syslog
Same change as the previous commit did for Fedora. fcrozat agreed.
Michal Schmidt [Wed, 9 Nov 2011 07:58:36 +0000 (08:58 +0100)]
units/fedora: let rc-local.service log to syslog
rc-local.service should not be excluded from the default stdout logging.
Missing logs were noticed by Andrew McNabb in
https://bugzilla.redhat.com/show_bug.cgi?id=750032#c3
Michal Schmidt [Wed, 9 Nov 2011 07:42:03 +0000 (08:42 +0100)]
units: drop unnecessary 'StandardOutput=syslog'
DefaultStandardOutput is syslog anyway. There's no reason to assume that
the administrator would want these units to be excluded when he configures
a different DefaultStandardOutput.
Michal Schmidt [Mon, 7 Nov 2011 00:08:21 +0000 (01:08 +0100)]
man: fix a typo in signal number
Michal Schmidt [Sun, 6 Nov 2011 22:55:06 +0000 (23:55 +0100)]
utmp: for DEAD_PROCESS write the current time to wtmp
Zeroed .ut_tv values in wtmp confuse chkrootkit.
Reported and debugged by Norman Smith. This is based on his patch,
but modified to behave more like upstart did in F14 and cleaned up.
https://bugzilla.redhat.com/show_bug.cgi?id=743696
Michal Schmidt [Sun, 6 Nov 2011 22:31:46 +0000 (23:31 +0100)]
utmp: initialize store with the found entry, not with the lookup key
Michal Schmidt [Sun, 6 Nov 2011 22:07:54 +0000 (23:07 +0100)]
utmp: no need to zero a struct before overwriting it with memcpy
Michal Schmidt [Sun, 6 Nov 2011 22:06:38 +0000 (23:06 +0100)]
utmp: remove unneded parameters
With these functions no caller ever passes anything else than 0
for 't' (meaning the current time will be used).
Lennart Poettering [Thu, 3 Nov 2011 18:55:36 +0000 (19:55 +0100)]
update TODO
Lennart Poettering [Thu, 3 Nov 2011 18:42:53 +0000 (19:42 +0100)]
cgroup: immediately remove all cgroups which run empty
Some controllers have scaling problems when many empty cgroups exist.
Hence, as soon as we get a notification that a cgroup is empty, delete
it. This is also nice to keep the systemd-cgls output short.
Lennart Poettering [Wed, 2 Nov 2011 13:08:49 +0000 (14:08 +0100)]
Merge remote-tracking branch 'zbigniew/systemadm_changes'
Ran Benita [Wed, 2 Nov 2011 08:48:51 +0000 (10:48 +0200)]
bash-completion: rename file since it is no longer for systemctl only
Ran Benita [Wed, 2 Nov 2011 08:48:50 +0000 (10:48 +0200)]
bash-completion: add completions for systemd-loginctl
This script is straightforward and should give proper completions for
all of systemd-loginctl's verbs.
Ran Benita [Wed, 2 Nov 2011 08:48:49 +0000 (10:48 +0200)]
bash-completion: update with new verbs and arguments
Adds arguments --root= --runtime --no-legend.
Adds verbs link mask unmask reenable list-unit-files.
Also uses list-unit-files to make nicer enable and disable completions.
Rebased due to changes in systemctl.
Dexter Morgan [Fri, 28 Oct 2011 17:16:33 +0000 (19:16 +0200)]
Add Mageia support
This patch adds support for the Mageia Linux distribution:
http://www.mageia.org/
Mageia is a fork of Mandriva although some divergence has already occured
and thus inclusion of these changes upstream allow us to (hopefully)
migrate more rapidly to the new standard approaches systemd offers.
Indeed, we already use the preferred mechanism of OS identification via
the /etc/os-release file rather than a distro specific variation.
This patch mostly mirrors the patch added previously for Mandriva
support. In addition to those original authors, this patch was mostly
written by Dexter Morgan with help from Colin Guthrie and Eugeni Dodonov.
Lennart Poettering [Tue, 1 Nov 2011 22:53:15 +0000 (23:53 +0100)]
update TODO
Tom Gundersen [Mon, 17 Oct 2011 11:01:08 +0000 (13:01 +0200)]
cryptsetup-generator: avoid ordering cycle on swap
Devices with random keys (swap), should not be ordered before local-fs.target,
as this creates a cycle with systemd-load-random-seed.service (and also it
does not make sense, a swap device is not a local-fs).
Lennart Poettering [Tue, 1 Nov 2011 21:29:48 +0000 (22:29 +0100)]
units: drop [Install] section from remote-fs-pre.target
remote-fs-pre.target is not a unit a user should ever explicitly enable.
Instead services which need to hook before network mounts should pull it
in.
Lennart Poettering [Tue, 1 Nov 2011 21:27:48 +0000 (22:27 +0100)]
mount: order remote mounts after both network.target and remote-fs-pre.target
Since remote-fs-pre.target is optional we cannot count on it to order
remote mounts after network.target, so let's add that order explicitly
in addition to remote-fs-pre.target.
https://bugzilla.redhat.com/show_bug.cgi?id=749940
Lennart Poettering [Tue, 1 Nov 2011 21:02:36 +0000 (22:02 +0100)]
cgroup: always recreate cgroup before we try to apply attributes
We might have trimmed the cgroup tree previously, hence don't trust our
own "realized" flag, always recreate cgroup tree before applying our
attributes to make sure this actually works out.
https://bugzilla.redhat.com/show_bug.cgi?id=749687
Lennart Poettering [Tue, 1 Nov 2011 17:18:17 +0000 (18:18 +0100)]
initctl: don't use dbus connection after PID 1 got respawned
After reexec PID 1 our bus connection is invalidated. Hence don't try to
reuse it, just terminate so that when we are spawned the next time we
just get a new one.
Spotted by Marti Raudsepp.
Thomas Jarosch [Wed, 26 Oct 2011 07:38:39 +0000 (09:38 +0200)]
condition: Fix file descriptor leak in test_capability()
Detected by cppcheck.
Tom Gundersen [Sat, 22 Oct 2011 16:47:08 +0000 (18:47 +0200)]
random-seed: convert poolsize from bits to bytes
The problem was first noted in a bug report against Arch's initscripts.
Reported-by: Taylan Ulrich Bayırlı <taylanbayirli@gmail.com>
Reported-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
Lennart Poettering [Tue, 1 Nov 2011 13:20:31 +0000 (14:20 +0100)]
plymouth: fix ply proto endianess issues
Plymouth enforces LE even for the local Ply proto, hence we should do
the conversion properly for BE arch compat.
Tracked down by Harald Hoyer.
https://bugzilla.redhat.com/show_bug.cgi?id=744415
Lennart Poettering [Tue, 1 Nov 2011 12:52:28 +0000 (13:52 +0100)]
README: explain dependency on cgroups
Lennart Poettering [Tue, 1 Nov 2011 12:48:30 +0000 (13:48 +0100)]
update TODO
Zbigniew Jędrzejewski-Szmek [Mon, 24 Oct 2011 09:49:59 +0000 (11:49 +0200)]
systemctl: make list-unit-files output more economical
The first column is given the width of the widest entry,
if possible, otherwise all entries are ellipsized to fit
in ($COLUMNS - (width of second column)).
[ Added a few fixes, calculate state_cols too, respect '--no-legend',
better handling of '--full' -- michich ]
Dave Reisner [Wed, 12 Oct 2011 00:56:53 +0000 (20:56 -0400)]
systemctl-completion: always invoke with --no-legend
In the case of completion for the 'restart' verb, passing the invalid
unit name (the colums header) causes completion to cease functioning
entirely, with the error:
Failed to issue method call: Unit name UNIT is not valid.
This adds a small wrapper function for systemctl which can have common
options added to it.
Jonathan Nieder [Mon, 17 Oct 2011 19:01:40 +0000 (21:01 +0200)]
audit: do not complain if kernel lacks audit
When running on a kernel without audit support, systemd currently
writes a mysterious-sounding error to its log:
systemd[1]: Failed to connect to audit log: Protocol not supported
Better to suppress the audit_open() failure message when (and only
when) it is due to running on a kernel without audit support, since in
this case the admin probably does not mind systemd not writing to the
audit log. This way, more serious errors like ENOMEM and EACCES will
stand out more.
Tollef Fog Heen [Mon, 17 Oct 2011 19:00:42 +0000 (21:00 +0200)]
service: Drop rcN.d runlevels from SysV services that also exist in rcS.d
Services which claim to start in both rcN.d and rcS.d generate
loops which for some reason seems to usually end up with dbus not
starting and the whole machine being quite unhappy. We now rather
assume that if a service can be started in rcS, it should not also
start in rcN.d.
Fixes Debian bug #637037
Michal Schmidt [Mon, 17 Oct 2011 09:12:12 +0000 (11:12 +0200)]
manager: fix a crash in isolating
HASHMAP_FOREACH is safe against the removal of the current entry, but
not against the removal of other entries. job_finish_and_invalidate()
can recursively remove other entries.
It triggered an assertion failure:
Assertion 'j->installed' failed at src/manager.c:1218, function
transaction_apply(). Aborting.
Fix the crash by iterating from the beginning when there is a
possibility that the iterator could be invalid.
It is O(n^2) in the worst case, but that's better than a crash.
https://bugzilla.redhat.com/show_bug.cgi?id=717325
Lennart Poettering [Tue, 11 Oct 2011 20:30:31 +0000 (22:30 +0200)]
util: properly detect what the last capability is
Lennart Poettering [Tue, 11 Oct 2011 18:46:56 +0000 (20:46 +0200)]
build-sys: bump release for v37
Lennart Poettering [Tue, 11 Oct 2011 18:21:06 +0000 (20:21 +0200)]
service: don't try to guess PID for SysV services anymore
As it turns out there are quite a number of SysV services too broken to
make the guessing work: instead of returning in the parent only after
the child is fully initialized they return immediately. The effect is
that the guessing in systemd might happen too early, at a time where the
final main process doesn't exist yet.
By turning this off we won't try to detect the main pid anymore, with
the effect that all processes of the service in question are considered
equally likely to be the main process.
Lennart Poettering [Tue, 11 Oct 2011 18:20:01 +0000 (20:20 +0200)]
localed: make sure s-s-k doesn't create any X11 config files anymore
Zbigniew Jędrzejewski-Szmek [Tue, 11 Oct 2011 10:34:14 +0000 (12:34 +0200)]
localed: shorten generate-kbd-model-map
Output is identical.
Zbigniew Jędrzejewski-Szmek [Tue, 11 Oct 2011 09:27:06 +0000 (11:27 +0200)]
pager: add _noreturn_ to pager_fallback()
src/pager.c: In function ‘pager_fallback’:
src/pager.c:35:13: warning: function might be possible candidate for attribute ‘noreturn’ [-Wmissing-noreturn]
Lennart Poettering [Tue, 11 Oct 2011 13:16:52 +0000 (15:16 +0200)]
unit: introduce ConditionCapability
Lennart Poettering [Tue, 11 Oct 2011 12:26:20 +0000 (14:26 +0200)]
units: forgot target units
Lennart Poettering [Tue, 11 Oct 2011 02:43:29 +0000 (04:43 +0200)]
units: increase LimitNOFILE a bit
since we need one fd per session (for logind) and one fd per service
(for stdout-syslog-bridge) increase the default rlimit a bit.
Lennart Poettering [Tue, 11 Oct 2011 02:43:01 +0000 (04:43 +0200)]
logind: fail gracefully if too many sessions are created
https://bugzilla.redhat.com/show_bug.cgi?id=744726
Lennart Poettering [Tue, 11 Oct 2011 02:23:35 +0000 (04:23 +0200)]
timedate: fall back to /etc/sysconfig/clock on Fedora, for compatibility with legacy
Lennart Poettering [Tue, 11 Oct 2011 01:41:04 +0000 (03:41 +0200)]
units: remount root and API FS before all mount units are applied
In order to ensure that bind mounts copy the final mount settings to the
new bind mount make the root and API FS mount options are applied before
the other file systems are mounted.
https://bugzilla.redhat.com/show_bug.cgi?id=718464
Lennart Poettering [Tue, 11 Oct 2011 01:33:53 +0000 (03:33 +0200)]
units: introduce local-fs-pre.target and remote-fs-pre.target
This hook target enables services to order themselves between
network.target and remote mounts, which is needed for GFS2 and similar
systems.
Zbigniew Jędrzejewski-Szmek [Tue, 20 Sep 2011 07:09:15 +0000 (09:09 +0200)]
l10n: Reword the polish translation a bit
s/siedzenie/stanowisko/: they both translate to seat in English, but 'stanowisko'
is a place where you work, while 'siedzenie' is like a chair.
s/podłączanie/podłączenie/: we are doing it now, now sometime in the future.
Ran Benita [Sat, 24 Sep 2011 09:04:16 +0000 (12:04 +0300)]
man: document list-unit-files
It's documented in the --help, but not in the manpage.
Dave Reisner [Mon, 26 Sep 2011 13:25:27 +0000 (09:25 -0400)]
sd-login.h: correct spelling mistakes in comments
Miklos Vajna [Tue, 27 Sep 2011 18:45:51 +0000 (20:45 +0200)]
hostname-setup: Frugalware switched to /etc/hostname
Paolo Bonzini [Mon, 10 Oct 2011 23:43:58 +0000 (01:43 +0200)]
readahead: lower max file size for readahead
https://bugs.freedesktop.org/show_bug.cgi?id=41336
Barry Scott [Mon, 3 Oct 2011 10:50:10 +0000 (11:50 +0100)]
man: .include directive does not include as textual include it includes by parsing the include file.
This means that section headers must be used inside of
a .include file otherwise all the lines are ignored.
Barry Scott [Mon, 3 Oct 2011 10:50:09 +0000 (11:50 +0100)]
man: for ExecStart= provide more details on env var substitution and how that turns into arguments.
For EnvironmentFile= explain that double quotes can be used
to protect whitespace.
Lennart Poettering [Mon, 10 Oct 2011 23:00:08 +0000 (01:00 +0200)]
update TODO
Thomas Jarosch [Wed, 5 Oct 2011 20:31:41 +0000 (22:31 +0200)]
util: fix close() call on wrong variable
Detected by "cppcheck" (actually it detected a file descriptor leak)
Thomas Jarosch [Wed, 5 Oct 2011 20:30:49 +0000 (22:30 +0200)]
tmpfiles: fix file descriptor leak
Detected by "cppcheck"
Lennart Poettering [Mon, 10 Oct 2011 20:22:47 +0000 (22:22 +0200)]
update TODO
Kay Sievers [Sun, 9 Oct 2011 14:36:45 +0000 (16:36 +0200)]
test_virtualization: do not try to compare id in !virt context
Kay Sievers [Sun, 9 Oct 2011 13:54:20 +0000 (15:54 +0200)]
update TODO
Lennart Poettering [Fri, 7 Oct 2011 20:00:23 +0000 (22:00 +0200)]
update TODO
Lennart Poettering [Fri, 7 Oct 2011 19:00:48 +0000 (21:00 +0200)]
hashmap: use different version of DJB's hash algorithm that uses shifting instead of multiplication
Lennart Poettering [Fri, 7 Oct 2011 18:50:59 +0000 (20:50 +0200)]
update TODO
Lennart Poettering [Mon, 3 Oct 2011 23:38:13 +0000 (01:38 +0200)]
logind: properly generate session creation response on dbus
This fixes the various reported issues with dbus message parsing when
running su.
Michal Schmidt [Thu, 29 Sep 2011 19:18:17 +0000 (21:18 +0200)]
systemctl: fix corrupted output of units
On some systems the list of units in systemctl output came out wrong,
all on one line and with missing descriptions.
It turns out printf() really attempts to mmap 2G memory when INT_MAX is
passed as the field width. On machines with small virtual memory
without overcommit the mmap inside printf() failed.
Do not use INT_MAX for unlimited width.
Lennart Poettering [Thu, 29 Sep 2011 17:44:32 +0000 (19:44 +0200)]
localed: handle multiple X11 kbd layouts
https://bugs.freedesktop.org/show_bug.cgi?id=41341
Lennart Poettering [Thu, 29 Sep 2011 14:00:29 +0000 (16:00 +0200)]
systemctl: fix error message when no connection to systemd is available
Lennart Poettering [Thu, 29 Sep 2011 13:31:53 +0000 (15:31 +0200)]
systemctl: fix detection whether the dbus connection is available
Lennart Poettering [Thu, 29 Sep 2011 13:09:18 +0000 (15:09 +0200)]
build-sys: fix build
Lennart Poettering [Wed, 28 Sep 2011 02:25:20 +0000 (04:25 +0200)]
vconsole: don't parse Fedora's KEYMAP= kernel parameters anymore
KEYMAP are use to pass keymap configuration to initrd, but not to the
system itself. Since the initrd might get out of date we need to make
sure that changes made in userspace override the settings from the
cmdline, hence drpo any use of it all for these variables.
Lennart Poettering [Wed, 28 Sep 2011 02:25:13 +0000 (04:25 +0200)]
localed: add SetX11Keyboard() and SetVConsoleKeyboard() bus calls
Kay Sievers [Tue, 27 Sep 2011 10:52:09 +0000 (12:52 +0200)]
analyze: always draw top kernel, initramfs, userspace bars
Based on Koen Kooi's patch. Renamed initrd to initramfs.
Michal Schmidt [Tue, 27 Sep 2011 09:20:20 +0000 (11:20 +0200)]
systemctl: better width and alignment of fields
Provide nicer output by taking advantage of the available columns.
Expand UNIT and DESCRIPTION if possible. Economize the space:
- never give UNIT more width than it can use.
- if there's a shortage of space, give 25 columns to UNIT, even
if it would result in overflowing the total columns. The field would not
be useful below width 25.
- then if possible, assign up to 25 columns to DESCRIPTION.
- then split any remaining space evenly between UNIT and DESCRIPTION.
Keep the columns aligned even with '--full'.
Michal Schmidt [Mon, 26 Sep 2011 22:48:40 +0000 (00:48 +0200)]
systemctl: print the legend regardless of stdout type, add --no-legend
Print the legend (the column headers and the footer with hints) by
default even to non-tty output. People seem to get confused by the
difference when they redirect the output.
Add a parameter to suppress the printing of the legend.
Related-to: https://bugzilla.redhat.com/show_bug.cgi?id=713567
Michal Schmidt [Mon, 26 Sep 2011 21:02:56 +0000 (23:02 +0200)]
pager: add a trivial internal pager
In the very unlikely scenario where none of the external pagers is
available, use an internal implementation to pass stdin to stdout.
Don't bother with trying 'cat', because it's no more useful than the
internal pager.
https://bugzilla.redhat.com/show_bug.cgi?id=713707
Lennart Poettering [Fri, 23 Sep 2011 16:30:02 +0000 (18:30 +0200)]
build-sys: bump release
Lennart Poettering [Fri, 23 Sep 2011 15:42:54 +0000 (17:42 +0200)]
readahead: opt out of bridge logging for readahead in order not to delay things unnecessarily
Lennart Poettering [Fri, 23 Sep 2011 15:42:21 +0000 (17:42 +0200)]
service: fix up std output/error before we add dependencies to the bridge socket
Lennart Poettering [Fri, 23 Sep 2011 15:20:45 +0000 (17:20 +0200)]
virt: add missing header inclusion
Lennart Poettering [Fri, 23 Sep 2011 15:09:49 +0000 (17:09 +0200)]
condition: optionally test against type of virtualization (vm vs. container)
Lennart Poettering [Fri, 23 Sep 2011 15:00:33 +0000 (17:00 +0200)]
util: move virtualization detection into its own files, and extend return codes
Koen Kooi [Thu, 22 Sep 2011 13:24:18 +0000 (15:24 +0200)]
analyze: report startup time in plot mode as well
It now prints something like "Startup finished in 1507ms (kernel) + 850ms (userspace) = 2357ms" below the legend.
Koen Kooi [Thu, 22 Sep 2011 09:30:04 +0000 (11:30 +0200)]
analyze: always draw 1s marker for scale
In situations like this:
root@omap4430-panda:~# systemd-analyze
Startup finished in 1499ms (kernel) + 916ms (userspace) = 2416ms
The svg plot will only have the 0s marker and no subsequent markers for scale. This patch forces the 1s marker to always be drawn.
Michal Schmidt [Fri, 23 Sep 2011 11:58:00 +0000 (13:58 +0200)]
unit: fix complementing of requirement deps with After deps for targets
'man systemd.target' says:
Unless DefaultDependencies= is set to false, target units will
implicitly complement all configured dependencies of type
Wants=, Requires=, RequiresOverridable= with dependencies of type
After= if the units in question also have DefaultDependencies=true.
It did not work because of a forgotten negation.
Lennart Poettering [Fri, 23 Sep 2011 03:33:33 +0000 (05:33 +0200)]
util: don't fail if no id was passed to detect_container()
Lennart Poettering [Fri, 23 Sep 2011 02:38:39 +0000 (04:38 +0200)]
util: detect systemd-nspawn without relying on ns cgroup tree