drm/amdgpu: Handle null atom context in VBIOS info ioctl

[ Upstream commit 5e7e82254270c8cf8b107451c5de01cee2f135ae ]

On some APU systems, there is no atom context and so the
atom_context struct is null.

Add a check to the VBIOS_INFO branch of amdgpu_info_ioctl
to handle this case, returning all zeroes.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu/nbio4.3: set proper rmmio_remap.reg_offset for SR-IOV

[ Upstream commit ab43213e7afd08ac68d4282060bacf309e70fd14 ]

Needed for HDP flush to work correctly.

Reviewed-by: Timmy Tsai <timmtsai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu/soc21: don't remap HDP registers for SR-IOV

[ Upstream commit 1832403cd41ca6b19b24e9d64f79cb08d920ca44 ]

This matches the behavior for soc15 and nv.

Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Timmy Tsai <timmtsai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Don't check registers, if using AUX BL control

[ Upstream commit f5b2c10b57615828b531bb0ae56bd6325a41167e ]

[Why]
Currently the driver looks DCN registers to access if BL is on or not.
This check is not valid if we are using AUX based brightness control.
This causes driver to not send out "backlight off" command during power off
sequence as it already thinks it is off.

[How]
Only check DCN registers if we aren't using AUX based brightness control.

Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Swapnil Patel <swapnil.patel@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

thermal/of: add missing of_node_put()

[ Upstream commit 8a81cf96f5510aaf9a65d103f7405079a7b0fcc5 ]

for_each_child_of_node performs an of_node_get on each
iteration, so a break out of the loop requires an
of_node_put.

This was done using the Coccinelle semantic patch
iterators/for_each_child.cocci

Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: asus-wmi: Support 2023 ROG X16 tablet mode

[ Upstream commit 4106a70ddad57ee6d8f98b81d6f036740c72762b ]

Add quirk for ASUS ROG X16 (GV601V, 2023 versions) Flow 2-in-1
to enable tablet mode with lid flip (all screen rotations).

Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230905082813.13470-1-luke@ljones.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/mellanox: mlxbf-bootctl: add NET dependency into Kconfig

[ Upstream commit c2dffda1d8f7511505bbbf16ba282f2079b30089 ]

The latest version of the mlxbf_bootctl driver utilizes
"sysfs_format_mac", and this API is only available if
NET is defined in the kernel configuration. This patch
changes the mlxbf_bootctl Kconfig to depend on NET.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309031058.JvwNDBKt-lkp@intel.com/
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20230905133243.31550-1-davthompson@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ata: sata_mv: Fix incorrect string length computation in mv_dump_mem()

[ Upstream commit e97eb65dd464e7f118a16a26337322d07eb653e2 ]

snprintf() returns the "number of characters which *would* be generated for
the given input", not the size *really* generated.

In order to avoid too large values for 'o' (and potential negative values
for "sizeof(linebuf) o") use scnprintf() instead of snprintf().

Note that given the "w < 4" in the for loop, the buffer can NOT
overflow, but using the *right* function is always better.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/smc: bugfix for smcr v2 server connect success statistic

[ Upstream commit 6912e724832c47bb381eb1bd1e483ec8df0d0f0f ]

In the macro SMC_STAT_SERV_SUCC_INC, the smcd_version is used
to determin whether to increase the v1 statistic or the v2
statistic. It is correct for SMCD. But for SMCR, smcr_version
should be used.

Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ring-buffer: Do not attempt to read past "commit"

[ Upstream commit 95a404bd60af6c4d9d8db01ad14fe8957ece31ca ]

When iterating over the ring buffer while the ring buffer is active, the
writer can corrupt the reader. There's barriers to help detect this and
handle it, but that code missed the case where the last event was at the
very end of the page and has only 4 bytes left.

The checks to detect the corruption by the writer to reads needs to see the
length of the event. If the length in the first 4 bytes is zero then the
length is stored in the second 4 bytes. But if the writer is in the process
of updating that code, there's a small window where the length in the first
4 bytes could be zero even though the length is only 4 bytes. That will
cause rb_event_length() to read the next 4 bytes which could happen to be off the
allocated page.

To protect against this, fail immediately if the next event pointer is
less than 8 bytes from the end of the commit (last byte of data), as all
events must be a minimum of 8 bytes anyway.

Link: https://lore.kernel.org/all/20230905141245.26470-1-Tze-nan.Wu@mediatek.com/
Link: https://lore.kernel.org/linux-trace-kernel/20230907122820.0899019c@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Reported-by: Tze-nan Wu <Tze-nan.Wu@mediatek.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: fix dependency checker script

[ Upstream commit 5f9dd2e896a91bfca90f8463eb6808c03d535d8a ]

This patch fixes inconsistencies in the parsing rules of the levels 1
and 2 of the kselftest_deps.sh.  It was added the levels 4 and 5 to
account for a few edge cases that are present in some tests, also some
minor identation styling have been fixed (s/    /\t/g).

Signed-off-by: Ricardo B. Marliere <rbmarliere@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: assert delayed node locked when removing delayed item

[ Upstream commit a57c2d4e46f519b24558ae0752c17eec416ac72a ]

When removing a delayed item, or releasing which will remove it as well,
we will modify one of the delayed node's rbtrees and item counter if the
delayed item is in one of the rbtrees. This require having the delayed
node's mutex locked, otherwise we will race with other tasks modifying
the rbtrees and the counter.

This is motivated by a previous version of another patch actually calling
btrfs_release_delayed_item() after unlocking the delayed node's mutex and
against a delayed item that is in a rbtree.

So assert at __btrfs_remove_delayed_item() that the delayed node's mutex
is locked.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ring-buffer: Avoid softlockup in ring_buffer_resize()

[ Upstream commit f6bd2c92488c30ef53b5bd80c52f0a7eee9d545a ]

When user resize all trace ring buffer through file 'buffer_size_kb',
then in ring_buffer_resize(), kernel allocates buffer pages for each
cpu in a loop.

If the kernel preemption model is PREEMPT_NONE and there are many cpus
and there are many buffer pages to be allocated, it may not give up cpu
for a long time and finally cause a softlockup.

To avoid it, call cond_resched() after each cpu buffer allocation.

Link: https://lore.kernel.org/linux-trace-kernel/20230906081930.3939106-1-zhengyejian1@huawei.com
Cc: <mhiramat@kernel.org>
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/ftrace: Correctly enable event in instance-event.tc

[ Upstream commit f4e4ada586995b17f828c6d147d1800eb1471450 ]

Function instance_set() expects to enable event 'sched_switch', so we
should set 1 to its 'enable' file.

Testcase passed after this patch:
  # ./ftracetest test.d/instances/instance-event.tc
  === Ftrace unit tests ===
  [1] Test creation and deletion of trace instances while setting an event
  [PASS]

  # of passed:  1
  # of failed:  0
  # of unresolved:  0
  # of untested:  0
  # of unsupported:  0
  # of xfailed:  0
  # of undefined(test bug):  0

Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: core: Poll HCS.UCRDY before issuing a UIC command

[ Upstream commit d32533d30e2119b0c0aa17596734f1f842f750df ]

With auto hibern8 enabled, UIC could be busy processing a hibern8 operation
and the HCI would reports UIC not ready for a short while through
HCS.UCRDY. The UFS driver doesn't currently handle this situation. The
UFSHCI spec specifies UCRDY like this: whether the host controller is ready
to process UIC COMMAND

The 'ready' could be seen as many different meanings. If the meaning
includes not processing any request from HCI, processing a hibern8
operation can be 'not ready'. In this situation, the driver needs to wait
until the operations is completed.

Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com>
Link: https://lore.kernel.org/r/550484ffb66300bdcec63d3e304dfd55cb432f1f.1693790060.git.kwmad.kim@samsung.com
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Chanwoo Lee <cw9316.lee@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: core: Move __ufshcd_send_uic_cmd() outside host_lock

[ Upstream commit 2d3f59cf868b4a2dd678a96cd49bdd91411bd59f ]

__ufshcd_send_uic_cmd() is wrapped by uic_cmd_mutex and its related
contexts are accessed within the section wrapped by uic_cmd_mutex. Thus,
wrapping with host_lock is redundant.

Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com>
Link: https://lore.kernel.org/r/782ba5f26f0a96e58d85dff50751787d2d2a6b2b.1693790060.git.kwmad.kim@samsung.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chanwoo Lee <cw9316.lee@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qedf: Add synchronization between I/O completions and abort

[ Upstream commit 7df0b2605489bef3f4223ad66f1f9bb8d50d4cd2 ]

Avoid race condition between I/O completion and abort processing by
protecting the cmd_type with the rport lock.

Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Link: https://lore.kernel.org/r/20230901060646.27885-1-skashyap@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

parisc: irq: Make irq_stack_union static to avoid sparse warning

[ Upstream commit b1bef1388c427cdad7331a9c8eb4ebbbe5b954b0 ]

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

parisc: drivers: Fix sparse warning

[ Upstream commit b137b9d60b8add5620a06c687a71ce18776730b0 ]

Fix "warning: directive in macro's argument list" warning.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

parisc: iosapic.c: Fix sparse warnings

[ Upstream commit 927c6c8aa27c284a799b8c18784e37d3373af908 ]

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

parisc: sba: Fix compile warning wrt list of SBA devices

[ Upstream commit eb3255ee8f6f4691471a28fbf22db5e8901116cd ]

Fix this makecheck warning:
drivers/parisc/sba_iommu.c:98:19: warning: symbol 'sba_list'
was not declared. Should it be static?

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-fc: Prevent null pointer dereference in nvme_fc_io_getuuid()

[ Upstream commit 8ae5b3a685dc59a8cf7ccfe0e850999ba9727a3c ]

The nvme_fc_fcp_op structure describing an AEN operation is initialized with a
null request structure pointer. An FC LLDD may make a call to
nvme_fc_io_getuuid passing a pointer to an nvmefc_fcp_req for an AEN operation.

Add validation of the request structure pointer before dereference.

Signed-off-by: Nigel Kirkland <nkirkland2304@gmail.com>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: sun6i: fix race between DMA RX transfer completion and RX FIFO drain

[ Upstream commit 1f11f4202caf5710204d334fe63392052783876d ]

Previously the transfer complete IRQ immediately drained to RX FIFO to
read any data remaining in FIFO to the RX buffer. This behaviour is
correct when dealing with SPI in interrupt mode. However in DMA mode the
transfer complete interrupt still fires as soon as all bytes to be
transferred have been stored in the FIFO. At that point data in the FIFO
still needs to be picked up by the DMA engine. Thus the drain procedure
and DMA engine end up racing to read from RX FIFO, corrupting any data
read. Additionally the RX buffer pointer is never adjusted according to
DMA progress in DMA mode, thus calling the RX FIFO drain procedure in DMA
mode is a bug.
Fix corruptions in DMA RX mode by draining RX FIFO only in interrupt mode.
Also wait for completion of RX DMA when in DMA mode before returning to
ensure all data has been copied to the supplied memory buffer.

Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
Link: https://lore.kernel.org/r/20230827152558.5368-3-t.schramm@manjaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: sun6i: reduce DMA RX transfer width to single byte

[ Upstream commit 171f8a49f212e87a8b04087568e1b3d132e36a18 ]

Through empirical testing it has been determined that sometimes RX SPI
transfers with DMA enabled return corrupted data. This is down to single
or even multiple bytes lost during DMA transfer from SPI peripheral to
memory. It seems the RX FIFO within the SPI peripheral can become
confused when performing bus read accesses wider than a single byte to it
during an active SPI transfer.

This patch reduces the width of individual DMA read accesses to the
RX FIFO to a single byte to mitigate that issue.

Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
Link: https://lore.kernel.org/r/20230827152558.5368-2-t.schramm@manjaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Annotate bpf_long_memcpy with data_race

[ Upstream commit 6a86b5b5cd76d2734304a0173f5f01aa8aa2025e ]

syzbot reported a data race splat between two processes trying to
update the same BPF map value via syscall on different CPUs:

  BUG: KCSAN: data-race in bpf_percpu_array_update / bpf_percpu_array_update

  write to 0xffffe8fffe7425d8 of 8 bytes by task 8257 on cpu 1:
   bpf_long_memcpy include/linux/bpf.h:428 [inline]
   bpf_obj_memcpy include/linux/bpf.h:441 [inline]
   copy_map_value_long include/linux/bpf.h:464 [inline]
   bpf_percpu_array_update+0x3bb/0x500 kernel/bpf/arraymap.c:380
   bpf_map_update_value+0x190/0x370 kernel/bpf/syscall.c:175
   generic_map_update_batch+0x3ae/0x4f0 kernel/bpf/syscall.c:1749
   bpf_map_do_batch+0x2df/0x3d0 kernel/bpf/syscall.c:4648
   __sys_bpf+0x28a/0x780
   __do_sys_bpf kernel/bpf/syscall.c:5241 [inline]
   __se_sys_bpf kernel/bpf/syscall.c:5239 [inline]
   __x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5239
   do_syscall_x64 arch/x86/entry/common.c:50 [inline]
   do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
   entry_SYSCALL_64_after_hwframe+0x63/0xcd

  write to 0xffffe8fffe7425d8 of 8 bytes by task 8268 on cpu 0:
   bpf_long_memcpy include/linux/bpf.h:428 [inline]
   bpf_obj_memcpy include/linux/bpf.h:441 [inline]
   copy_map_value_long include/linux/bpf.h:464 [inline]
   bpf_percpu_array_update+0x3bb/0x500 kernel/bpf/arraymap.c:380
   bpf_map_update_value+0x190/0x370 kernel/bpf/syscall.c:175
   generic_map_update_batch+0x3ae/0x4f0 kernel/bpf/syscall.c:1749
   bpf_map_do_batch+0x2df/0x3d0 kernel/bpf/syscall.c:4648
   __sys_bpf+0x28a/0x780
   __do_sys_bpf kernel/bpf/syscall.c:5241 [inline]
   __se_sys_bpf kernel/bpf/syscall.c:5239 [inline]
   __x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5239
   do_syscall_x64 arch/x86/entry/common.c:50 [inline]
   do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
   entry_SYSCALL_64_after_hwframe+0x63/0xcd

  value changed: 0x0000000000000000 -> 0xfffffff000002788

The bpf_long_memcpy is used with 8-byte aligned pointers, power-of-8 size
and forced to use long read/writes to try to atomically copy long counters.
It is best-effort only and no barriers are here since it _will_ race with
concurrent updates from BPF programs. The bpf_long_memcpy() is called from
bpf(2) syscall. Marco suggested that the best way to make this known to
KCSAN would be to use data_race() annotation.

Reported-by: syzbot+97522333291430dd277f@syzkaller.appspotmail.com
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/bpf/000000000000d87a7f06040c970c@google.com
Link: https://lore.kernel.org/bpf/57628f7a15e20d502247c3b55fceb1cb2b31f266.1693342186.git.daniel@iogearbox.net
Signed-off-by: Sasha Levin <sashal@kernel.org>

dma-debug: don't call __dma_entry_alloc_check_leak() under free_entries_lock

[ Upstream commit fb5a4315591dae307a65fc246ca80b5159d296e1 ]

__dma_entry_alloc_check_leak() calls into printk -> serial console
output (qcom geni) and grabs port->lock under free_entries_lock
spin lock, which is a reverse locking dependency chain as qcom_geni
IRQ handler can call into dma-debug code and grab free_entries_lock
under port->lock.

Move __dma_entry_alloc_check_leak() call out of free_entries_lock
scope so that we don't acquire serial console's port->lock under it.

Trimmed-down lockdep splat:

 The existing dependency chain (in reverse order) is:

               -> #2 (free_entries_lock){-.-.}-{2:2}:
        _raw_spin_lock_irqsave+0x60/0x80
        dma_entry_alloc+0x38/0x110
        debug_dma_map_page+0x60/0xf8
        dma_map_page_attrs+0x1e0/0x230
        dma_map_single_attrs.constprop.0+0x6c/0xc8
        geni_se_rx_dma_prep+0x40/0xcc
        qcom_geni_serial_isr+0x310/0x510
        __handle_irq_event_percpu+0x110/0x244
        handle_irq_event_percpu+0x20/0x54
        handle_irq_event+0x50/0x88
        handle_fasteoi_irq+0xa4/0xcc
        handle_irq_desc+0x28/0x40
        generic_handle_domain_irq+0x24/0x30
        gic_handle_irq+0xc4/0x148
        do_interrupt_handler+0xa4/0xb0
        el1_interrupt+0x34/0x64
        el1h_64_irq_handler+0x18/0x24
        el1h_64_irq+0x64/0x68
        arch_local_irq_enable+0x4/0x8
        ____do_softirq+0x18/0x24
        ...

               -> #1 (&port_lock_key){-.-.}-{2:2}:
        _raw_spin_lock_irqsave+0x60/0x80
        qcom_geni_serial_console_write+0x184/0x1dc
        console_flush_all+0x344/0x454
        console_unlock+0x94/0xf0
        vprintk_emit+0x238/0x24c
        vprintk_default+0x3c/0x48
        vprintk+0xb4/0xbc
        _printk+0x68/0x90
        register_console+0x230/0x38c
        uart_add_one_port+0x338/0x494
        qcom_geni_serial_probe+0x390/0x424
        platform_probe+0x70/0xc0
        really_probe+0x148/0x280
        __driver_probe_device+0xfc/0x114
        driver_probe_device+0x44/0x100
        __device_attach_driver+0x64/0xdc
        bus_for_each_drv+0xb0/0xd8
        __device_attach+0xe4/0x140
        device_initial_probe+0x1c/0x28
        bus_probe_device+0x44/0xb0
        device_add+0x538/0x668
        of_device_add+0x44/0x50
        of_platform_device_create_pdata+0x94/0xc8
        of_platform_bus_create+0x270/0x304
        of_platform_populate+0xac/0xc4
        devm_of_platform_populate+0x60/0xac
        geni_se_probe+0x154/0x160
        platform_probe+0x70/0xc0
        ...

               -> #0 (console_owner){-...}-{0:0}:
        __lock_acquire+0xdf8/0x109c
        lock_acquire+0x234/0x284
        console_flush_all+0x330/0x454
        console_unlock+0x94/0xf0
        vprintk_emit+0x238/0x24c
        vprintk_default+0x3c/0x48
        vprintk+0xb4/0xbc
        _printk+0x68/0x90
        dma_entry_alloc+0xb4/0x110
        debug_dma_map_sg+0xdc/0x2f8
        __dma_map_sg_attrs+0xac/0xe4
        dma_map_sgtable+0x30/0x4c
        get_pages+0x1d4/0x1e4 [msm]
        msm_gem_pin_pages_locked+0x38/0xac [msm]
        msm_gem_pin_vma_locked+0x58/0x88 [msm]
        msm_ioctl_gem_submit+0xde4/0x13ac [msm]
        drm_ioctl_kernel+0xe0/0x15c
        drm_ioctl+0x2e8/0x3f4
        vfs_ioctl+0x30/0x50
        ...

 Chain exists of:
   console_owner --> &port_lock_key --> free_entries_lock

  Possible unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(free_entries_lock);
                                lock(&port_lock_key);
                                lock(free_entries_lock);
   lock(console_owner);

                *** DEADLOCK ***

 Call trace:
  dump_backtrace+0xb4/0xf0
  show_stack+0x20/0x30
  dump_stack_lvl+0x60/0x84
  dump_stack+0x18/0x24
  print_circular_bug+0x1cc/0x234
  check_noncircular+0x78/0xac
  __lock_acquire+0xdf8/0x109c
  lock_acquire+0x234/0x284
  console_flush_all+0x330/0x454
  console_unlock+0x94/0xf0
  vprintk_emit+0x238/0x24c
  vprintk_default+0x3c/0x48
  vprintk+0xb4/0xbc
  _printk+0x68/0x90
  dma_entry_alloc+0xb4/0x110
  debug_dma_map_sg+0xdc/0x2f8
  __dma_map_sg_attrs+0xac/0xe4
  dma_map_sgtable+0x30/0x4c
  get_pages+0x1d4/0x1e4 [msm]
  msm_gem_pin_pages_locked+0x38/0xac [msm]
  msm_gem_pin_vma_locked+0x58/0x88 [msm]
  msm_ioctl_gem_submit+0xde4/0x13ac [msm]
  drm_ioctl_kernel+0xe0/0x15c
  drm_ioctl+0x2e8/0x3f4
  vfs_ioctl+0x30/0x50
  ...

Reported-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ceph: drop messages from MDS when unmounting

[ Upstream commit e3dfcab2080dc1f9a4b09cc1327361bc2845bfcd ]

When unmounting all the dirty buffers will be flushed and after
the last osd request is finished the last reference of the i_count
will be released. Then it will flush the dirty cap/snap to MDSs,
and the unmounting won't wait the possible acks, which will ihold
the inodes when updating the metadata locally but makes no sense
any more, of this. This will make the evict_inodes() to skip these
inodes.

If encrypt is enabled the kernel generate a warning when removing
the encrypt keys when the skipped inodes still hold the keyring:

WARNING: CPU: 4 PID: 168846 at fs/crypto/keyring.c:242 fscrypt_destroy_keyring+0x7e/0xd0
CPU: 4 PID: 168846 Comm: umount Tainted: G S  6.1.0-rc5-ceph-g72ead199864c #1
Hardware name: Supermicro SYS-5018R-WR/X10SRW-F, BIOS 2.0 12/17/2015
RIP: 0010:fscrypt_destroy_keyring+0x7e/0xd0
RSP: 0018:ffffc9000b277e28 EFLAGS: 00010202
RAX: 0000000000000002 RBX: ffff88810d52ac00 RCX: ffff88810b56aa00
RDX: 0000000080000000 RSI: ffffffff822f3a09 RDI: ffff888108f59000
RBP: ffff8881d394fb88 R08: 0000000000000028 R09: 0000000000000000
R10: 0000000000000001 R11: 11ff4fe6834fcd91 R12: ffff8881d394fc40
R13: ffff888108f59000 R14: ffff8881d394f800 R15: 0000000000000000
FS:  00007fd83f6f1080(0000) GS:ffff88885fd00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f918d417000 CR3: 000000017f89a005 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
generic_shutdown_super+0x47/0x120
kill_anon_super+0x14/0x30
ceph_kill_sb+0x36/0x90 [ceph]
deactivate_locked_super+0x29/0x60
cleanup_mnt+0xb8/0x140
task_work_run+0x67/0xb0
exit_to_user_mode_prepare+0x23d/0x240
syscall_exit_to_user_mode+0x25/0x60
do_syscall_64+0x40/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fd83dc39e9b

Later the kernel will crash when iput() the inodes and dereferencing
the "sb->s_master_keys", which has been released by the
generic_shutdown_super().

Link: https://tracker.ceph.com/issues/59162
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/reboot: VMCLEAR active VMCSes before emergency reboot

[ Upstream commit b23c83ad2c638420ec0608a9de354507c41bec29 ]

VMCLEAR active VMCSes before any emergency reboot, not just if the kernel
may kexec into a new kernel after a crash.  Per Intel's SDM, the VMX
architecture doesn't require the CPU to flush the VMCS cache on INIT.  If
an emergency reboot doesn't RESET CPUs, cached VMCSes could theoretically
be kept and only be written back to memory after the new kernel is booted,
i.e. could effectively corrupt memory after reboot.

Opportunistically remove the setting of the global pointer to NULL to make
checkpatch happy.

Cc: Andrew Cooper <Andrew.Cooper3@citrix.com>
Link: https://lore.kernel.org/r/20230721201859.2307736-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: npcm7xx: Fix callback completion ordering

[ Upstream commit 92e73d807b68b2214fcafca4e130b5300a9d4b3c ]

Sometimes, our completions race with new master transfers and override
the bus->operation and bus->master_or_slave variables. This causes
transactions to timeout and kernel crashes less frequently.

To remedy this, we re-order all completions to the very end of the
function.

Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver")
Signed-off-by: William A. Kennington III <william@wkennington.com>
Reviewed-by: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: pmic-eic-sprd: Add can_sleep flag for PMIC EIC chip

[ Upstream commit 26d9e5640d2130ee16df7b1fb6a908f460ab004c ]

The drivers uses a mutex and I2C bus access in its PMIC EIC chip
get implementation. This means these functions can sleep and the PMIC EIC
chip should set the can_sleep property to true.

This will ensure that a warning is printed when trying to get the
value from a context that potentially can't sleep.

Fixes: 348f3cde84ab ("gpio: Add Spreadtrum PMIC EIC driver support")
Signed-off-by: Wenhua Lin <Wenhua.Lin@unisoc.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: arm_ffa: Don't set the memory region attributes for MEM_LEND

[ Upstream commit 9dda1178479aa0a73fe0eaabfe2d9a1c603cfeed ]

As per the FF-A specification: section "Usage of other memory region
attributes", in a transaction to donate memory or lend memory to a single
borrower, if the receiver is a PE or Proxy endpoint, the owner must not
specify the attributes and the relayer will return INVALID_PARAMETERS
if the attributes are set.

Let us not set the memory region attributes for MEM_LEND.

Fixes: 82a8daaecfd9 ("firmware: arm_ffa: Add support for MEM_LEND")
Reported-by: Joao Alves <joao.alves@arm.com>
Reported-by: Olivier Deprez <olivier.deprez@arm.com>
Link: https://lore.kernel.org/r/20230919-ffa_v1-1_notif-v2-13-6f3a3ca3923c@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: imx: Add imx8mm-prt8mm.dtb to build

[ Upstream commit f09752eaf0e8f8befc26b44c4d3e15633e56d16a ]

imx8mm-prt8mm.dts was not getting built. Add it to the build.

Fixes: 58497d7a13ed ("arm64: dts: imx: add Protonic PRT8MM board")
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: imx8m: Enable OCOTP clock for imx8mm before reading registers

[ Upstream commit 9d1e8275a28f51599d754ce661c91e0a689c0234 ]

Commit 836fb30949d9 ("soc: imx8m: Enable OCOTP clock before reading the
register") added configuration to enable the OCOTP clock before
attempting to read from the associated registers.

This same kexec issue is present with the imx8m SoCs that use the
imx8mm_soc_uid function (e.g. imx8mp). This requires the imx8mm_soc_uid
function to configure the OCOTP clock before accessing the associated
registers. This change implements the same clock enable functionality
that is present in the imx8mq_soc_revision function for the
imx8mm_soc_uid function.

Signed-off-by: Nathan Rossi <nathan.rossi@digi.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Fixes: 836fb30949d9 ("soc: imx8m: Enable OCOTP clock before reading the register")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/powerpc: Fix emit_tests to work with run_kselftest.sh

[ Upstream commit 58b33e78a31782ffe25d404d5eba9a45fe636e27 ]

In order to use run_kselftest.sh the list of tests must be emitted to
populate kselftest-list.txt.

The powerpc Makefile is written to use EMIT_TESTS. But support for
EMIT_TESTS was dropped in commit d4e59a536f50 ("selftests: Use runner.sh
for emit targets"). Although prior to that commit a548de0fe8e1
("selftests: lib.mk: add test execute bit check to EMIT_TESTS") had
already broken run_kselftest.sh for powerpc due to the executable check
using the wrong path.

It can be fixed by replacing the EMIT_TESTS definitions with actual
emit_tests rules in the powerpc Makefiles. This makes run_kselftest.sh
able to run powerpc tests:

  $ cd linux
  $ export ARCH=powerpc
  $ export CROSS_COMPILE=powerpc64le-linux-gnu-
  $ make headers
  $ make -j -C tools/testing/selftests install
  $ grep -c "^powerpc" tools/testing/selftests/kselftest_install/kselftest-list.txt
  182

Fixes: d4e59a536f50 ("selftests: Use runner.sh for emit targets")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230921072623.828772-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/powerpc: Pass make context to children

[ Upstream commit 4ecd0868c5138238dec8a1549bb6ff8e5b48208b ]

Make supports passing the 'jobserver' (parallel make support) to child
invocations of make when either
1. The target command uses $(MAKE) directly
2. The command starts with '+'

This context is not passed through expansions that result in $(MAKE), so
the macros used in several places fail to pass on the jobserver context.
Warnings are also raised by the child mentioning this.

Prepend macros lines that invoke $(MAKE) with '+' to allow passing the
jobserver context to these children.

Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230228000709.124727-3-bgray@linux.ibm.com
Stable-dep-of: 58b33e78a317 ("selftests/powerpc: Fix emit_tests to work with run_kselftest.sh")
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/powerpc: Use CLEAN macro to fix make warning

[ Upstream commit 69608683a65be5322ef44091eaeb9890472b2eea ]

The CLEAN macro was added in 337f1e36 to prevent the

    Makefile:50: warning: overriding recipe for target 'clean'
    ../../lib.mk:124: warning: ignoring old recipe for target 'clean'

style warnings. Expand it's use to fix another case of redefining a
target directly.

Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230228000709.124727-2-bgray@linux.ibm.com
Stable-dep-of: 58b33e78a317 ("selftests/powerpc: Fix emit_tests to work with run_kselftest.sh")
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: rk817: Fix node refcount leak

[ Upstream commit 488ef44c068e79752dba8eda0b75f524f111a695 ]

Dan Carpenter reports that the Smatch static checker warning has found
that there is another refcount leak in the probe function. While
of_node_put() was added in one of the return paths, it should in
fact be added for ALL return paths that return an error and at driver
removal time.

Fixes: 54c03bfd094f ("power: supply: Fix refcount leak in rk817_charger_probe")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Closes: https://lore.kernel.org/linux-pm/dc0bb0f8-212d-4be7-be69-becd2a3f9a80@kili.mountain/
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20230920145644.57964-1-macroalpha82@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xtensa: boot/lib: fix function prototypes

[ Upstream commit f54d02c8f2cc4b46ba2a3bd8252a6750453b6f2b ]

Add function prototype for gunzip() to the boot library code and make
exit() and zalloc() static.

arch/xtensa/boot/lib/zmem.c:8:6: warning: no previous prototype for 'exit' [-Wmissing-prototypes]
    8 | void exit (void)
arch/xtensa/boot/lib/zmem.c:13:7: warning: no previous prototype for 'zalloc' [-Wmissing-prototypes]
   13 | void *zalloc(unsigned size)
arch/xtensa/boot/lib/zmem.c:35:6: warning: no previous prototype for 'gunzip' [-Wmissing-prototypes]
   35 | void gunzip (void *dst, int dstlen, unsigned char *src, int *lenp)

Fixes: 4bedea945451 ("xtensa: Architecture support for Tensilica Xtensa Part 2")
Fixes: e7d163f76665 ("xtensa: Removed local copy of zlib and fixed O= support")
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xtensa: umulsidi3: fix conditional expression

[ Upstream commit 9aecda97ec3deecbfa7670877c8ddfd3d0fc87c4 ]

Even when a variant has one or more of these defines set to 1, the
multiplier code paths are not used. Change the expression so that the
correct code paths are used.

arch/xtensa/lib/umulsidi3.S:44:38: warning: "XCHAL_NO_MUL" is not defined, evaluates to 0 [-Wundef]
   44 | #if defined(__XTENSA_CALL0_ABI__) && XCHAL_NO_MUL
arch/xtensa/lib/umulsidi3.S:145:38: warning: "XCHAL_NO_MUL" is not defined, evaluates to 0 [-Wundef]
  145 | #if defined(__XTENSA_CALL0_ABI__) && XCHAL_NO_MUL
arch/xtensa/lib/umulsidi3.S:159:5: warning: "XCHAL_NO_MUL" is not defined, evaluates to 0 [-Wundef]
  159 | #if XCHAL_NO_MUL

Fixes: 8939c58d68f9 ("xtensa: add __umulsidi3 helper")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Message-Id: <20230920052139.10570-16-rdunlap@infradead.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xtensa: boot: don't add include-dirs

[ Upstream commit 54d3d7d363823782c3444ddc41bb8cf1edc80514 ]

Drop the -I<include-dir> options to prevent build warnings since there
is not boot/include directory:

cc1: warning: arch/xtensa/boot/include: No such file or directory [-Wmissing-include-dirs]

Fixes: 437374e9a950 ("restore arch/{ppc/xtensa}/boot cflags")
Fixes: 4bedea945451 ("xtensa: Architecture support for Tensilica Xtensa Part 2")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Message-Id: <20230920052139.10570-15-rdunlap@infradead.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xtensa: iss/network: make functions static

[ Upstream commit 1b59efeb59851277266318f4e0132aa61ce3455e ]

Make 2 functions static to prevent build warnings:

arch/xtensa/platforms/iss/network.c:204:16: warning: no previous prototype for 'tuntap_protocol' [-Wmissing-prototypes]
  204 | unsigned short tuntap_protocol(struct sk_buff *skb)
arch/xtensa/platforms/iss/network.c:444:6: warning: no previous prototype for 'iss_net_user_timer_expire' [-Wmissing-prototypes]
  444 | void iss_net_user_timer_expire(struct timer_list *unused)

Fixes: 7282bee78798 ("xtensa: Architecture support for Tensilica Xtensa Part 8")
Fixes: d8479a21a98b ("xtensa: Convert timers to use timer_setup()")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Message-Id: <20230920052139.10570-14-rdunlap@infradead.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xtensa: add default definition for XCHAL_HAVE_DIV32

[ Upstream commit 494e87ffa0159b3f879694a9231089707792a44d ]

When variant FSF is set, XCHAL_HAVE_DIV32 is not defined. Add default
definition for that macro to prevent build warnings:

arch/xtensa/lib/divsi3.S:9:5: warning: "XCHAL_HAVE_DIV32" is not defined, evaluates to 0 [-Wundef]
    9 | #if XCHAL_HAVE_DIV32
arch/xtensa/lib/modsi3.S:9:5: warning: "XCHAL_HAVE_DIV32" is not defined, evaluates to 0 [-Wundef]
    9 | #if XCHAL_HAVE_DIV32

Fixes: 173d6681380a ("xtensa: remove extra header files")
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: lore.kernel.org/r/202309150556.t0yCdv3g-lkp@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: imx-dsp: Fix an error handling path in imx_dsp_setup_channels()

[ Upstream commit e527adfb9b7d9d05a4577c116519e59a2bda4b05 ]

If mbox_request_channel_byname() fails, the memory allocated a few lines
above still need to be freed before going to the error handling path.

Fixes: 046326989a18 ("firmware: imx: Save channel name for further use")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: ucs1002: fix error code in ucs1002_get_property()

[ Upstream commit e35059949daa83f8dadf710d0f829ab3c3a72fe2 ]

This function is supposed to return 0 for success instead of returning
the val->intval.  This makes it the same as the other case statements
in this function.

Fixes: 81196e2e57fc ("power: supply: ucs1002: fix some health status issues")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/687f64a4-4c6e-4536-8204-98ad1df934e5@moroto.mountain
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: ti-sysc: Fix SYSC_QUIRK_SWSUP_SIDLE_ACT handling for uart wake-up

[ Upstream commit e5deb8f76e64d94ccef715e75ebafffd0c312d80 ]

The uarts should be tagged with SYSC_QUIRK_SWSUP_SIDLE instead of
SYSC_QUIRK_SWSUP_SIDLE_ACT. The difference is that SYSC_QUIRK_SWSUP_SIDLE
is used to force idle target modules rather than block idle during usage.

The SYSC_QUIRK_SWSUP_SIDLE_ACT should disable autoidle and wake-up when
a target module is active, and configure autoidle and wake-up when a
target module is inactive. We are missing configuring the target module
on sysc_disable_module(), and missing toggling of the wake-up bit.

Let's fix the issue to allow uart wake-up to work.

Fixes: fb685f1c190e ("bus: ti-sysc: Handle swsup idle mode quirks")
Tested-by: Dhruva Gole <d-gole@ti.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: ti: omap: motorola-mapphone: Fix abe_clkctrl warning on boot

[ Upstream commit ac08bda1569b06b7a62c7b4dd00d4c3b28ceaaec ]

Commit 0840242e8875 ("ARM: dts: Configure clock parent for pwm vibra")
attempted to fix the PWM settings but ended up causin an additional clock
reparenting error:

clk: failed to reparent abe-clkctrl:0060:24 to sys_clkin_ck: -22

Only timer9 is in the PER domain and can use the sys_clkin_ck clock source.
For timer8, the there is no sys_clkin_ck available as it's in the ABE
domain, instead it should use syc_clk_div_ck. However, for power
management, we want to use the always on sys_32k_ck instead.

Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Cc: Carl Philipp Klemm <philipp@uvos.xyz>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Fixes: 0840242e8875 ("ARM: dts: Configure clock parent for pwm vibra")
Depends-on: 61978617e905 ("ARM: dts: Add minimal support for Droid Bionic xt875")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: Unify pinctrl-single pin group nodes for omap4

[ Upstream commit 7fff6f6d6e198ad619fea9dbbe9731999af56070 ]

We want to unify the pinctrl-single pin group nodes to use naming "pins".
Otherwise non-standad pin group names will add make dtbs checks errors
when the pinctrl-single yaml binding gets merged.

Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Stable-dep-of: ac08bda1569b ("ARM: dts: ti: omap: motorola-mapphone: Fix abe_clkctrl warning on boot")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: Unify pwm-omap-dmtimer node names

[ Upstream commit 4f15fc7c0f28ffcd6e9a56396db6edcdfa4c9925 ]

There is no reg property for pwm-omap-dmtimer.

Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Stable-dep-of: ac08bda1569b ("ARM: dts: ti: omap: motorola-mapphone: Fix abe_clkctrl warning on boot")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: ti: omap: Fix bandgap thermal cells addressing for omap3/4

[ Upstream commit 6469b2feade8fd82d224dd3734e146536f3e9f0e ]

Fix "thermal_sys: cpu_thermal: Failed to read thermal-sensors cells: -2"
error on boot for omap3/4. This is caused by wrong addressing in the dts
for bandgap sensor for single sensor instances.

Note that omap4-cpu-thermal.dtsi is shared across omap4/5 and dra7, so
we can't just change the addressing in omap4-cpu-thermal.dtsi.

Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Cc: Carl Philipp Klemm <philipp@uvos.xyz>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Fixes: a761d517bbb1 ("ARM: dts: omap3: Add cpu_thermal zone")
Fixes: 0bbf6c54d100 ("arm: dts: add omap4 CPU thermal data")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: omap: correct indentation

[ Upstream commit 8ae9c7a69fa14e95d032e64d8d758e3f85bee132 ]

Do not use spaces for indentation.

Link: https://lore.kernel.org/r/20221002092002.68880-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Stable-dep-of: 6469b2feade8 ("ARM: dts: ti: omap: Fix bandgap thermal cells addressing for omap3/4")
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: tegra: fix error return case for recalc_rate

[ Upstream commit a47b44fbb13f5e7a981b4515dcddc93a321ae89c ]

tegra-bpmp clocks driver makes implicit conversion of signed error
code to unsigned value in recalc_rate operation. The behavior for
recalc_rate, according to it's specification, should be that "If the
driver cannot figure out a rate for this clock, it must return 0."

Fixes: ca6f2796eef7 ("clk: tegra: Add BPMP clock driver")
Signed-off-by: Timo Alho <talho@nvidia.com>
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Link: https://lore.kernel.org/r/20230912112951.2330497-1-cyndis@kapsi.fi
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: sprd: Fix thm_parents incorrect configuration

[ Upstream commit b7b20cfe6f849c2682c5f7d3f50ede6321a5d04c ]

The thm*_clk have two clock sources 32k and 250k,excluding 32m.

Fixes: af3bd36573e3 ("clk: sprd: Add clocks support for UMS512")
Signed-off-by: Zhifeng Tang <zhifeng.tang@unisoc.com>
Acked-by: Chunyan Zhang <zhang.lyra@gmail.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230824092624.20020-1-zhifeng.tang@unisoc.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: mt6370: Fix missing error code in mt6370_chg_toggle_cfo()

[ Upstream commit 779873ec81306d2c40c459fa7c91a5d40655510d ]

When mt6370_chg_field_get() suceeds, ret is set to zero and returning
zero when flash led is still in strobe mode looks incorrect.

Fixes: 233cb8a47d65 ("power: supply: mt6370: Add MediaTek MT6370 charger driver")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: ChiaEn Wu <chiaen_wu@richtek.com>
Link: https://lore.kernel.org/r/20230906084815.2827930-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: arm_scmi: Fixup perf power-cost/microwatt support

[ Upstream commit c3638b851bc1ca0022dca9d6ca4beaa6ef03a216 ]

The perf power scale value would currently be reported as bogowatts if the
platform firmware supports microwatt power scale and meets the perf major
version requirements. Fix this by populating version information in the
driver private data before the call to protocol attributes is made.

CC: Chandra Sekhar Lingutla <quic_lingutla@quicinc.com>
Fixes: 3630cd8130ce ("firmware: arm_scmi: Add SCMI v3.1 perf power-cost in microwatts")
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20230811204818.30928-1-quic_sibis@quicinc.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: arm_scmi: Harden perf domain info access

[ Upstream commit 3da82112355bba263597fcbb24d275fc57e69e7e ]

Harden internal accesses to domain info in the SCMI perf protocol.

Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20230717161246.1761777-2-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Stable-dep-of: c3638b851bc1 ("firmware: arm_scmi: Fixup perf power-cost/microwatt support")
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: ti-sysc: Fix missing AM35xx SoC matching

[ Upstream commit 11729caa520950e17cd81bc43ffc477c46cf791e ]

Commit feaa8baee82a ("bus: ti-sysc: Implement SoC revision handling")
created a list of SoC types searching for strings based on names
and wildcards which associates the SoC to different families.

The OMAP34xx and OMAP35xx are treated as SOC_3430 while
OMAP36xx and OMAP37xx are treated as SOC_3630, but the AM35xx
isn't listed.

The AM35xx is mostly an OMAP3430, and a later commit a12315d6d270
("bus: ti-sysc: Make omap3 gpt12 quirk handling SoC specific") looks
for the SOC type and behaves in a certain way if it's SOC_3430.

This caused a regression on the AM3517 causing it to return two
errors:

 ti-sysc: probe of 48318000.target-module failed with error -16
 ti-sysc: probe of 49032000.target-module failed with error -16

Fix this by treating the creating SOC_AM35 and inserting it between
the SOC_3430 and SOC_3630.  If it is treaed the same way as the
SOC_3430 when checking the status of sysc_check_active_timer,
the error conditions will disappear.

Fixes: a12315d6d270 ("bus: ti-sysc: Make omap3 gpt12 quirk handling SoC specific")
Fixes: feaa8baee82a ("bus: ti-sysc: Implement SoC revision handling")
Signed-off-by: Adam Ford <aford173@gmail.com>
Message-ID: <20230906233442.270835-1-aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: ti-sysc: Use fsleep() instead of usleep_range() in sysc_reset()

[ Upstream commit d929b2b7464f95ec01e47f560b1e687482ba8929 ]

The am335x-evm started producing boot errors because of subtle timing
changes:

Unhandled fault: external abort on non-linefetch (0x1008) at 0xf03c1010
...
sysc_reset from sysc_probe+0xf60/0x1514
sysc_probe from platform_probe+0x5c/0xbc
...

The fix consists in using the appropriate sleep function in sysc reset.
For flexible sleeping, fsleep is recommended. Here, sysc delay parameter
can take any value in [0 - 255] us range. As a result, fsleep() should
be used, calling udelay() for a sysc delay lower than 10 us.

Signed-off-by: Julien Panis <jpanis@baylibre.com>
Fixes: e709ed70d122 ("bus: ti-sysc: Fix missing reset delay handling")
Message-ID: <20230821-fix-ti-sysc-reset-v1-1-5a0a5d8fae55@baylibre.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: ti-sn65dsi83: Do not generate HFP/HBP/HSA and EOT packet

[ Upstream commit ca161b259cc84fe1f4a2ce4c73c3832cf6f713f1 ]

Do not generate the HS front and back porch gaps, the HSA gap and
EOT packet, as per "SN65DSI83 datasheet SLLSEC1I - SEPTEMBER 2012
- REVISED OCTOBER 2020", page 22, these packets are not required.
This makes the TI SN65DSI83 bridge work with Samsung DSIM on i.MX8MN.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230403190242.224490-1-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: spi-gxp: BUG: Correct spi write return value

[ Upstream commit 1a8196a93e493c0a50b800cb09cef60b124eee15 ]

Bug fix to correct return value of gxp_spi_write function to zero.
Completion of succesful operation should return zero.

Fixes: 730bc8ba5e9e spi: spi-gxp: Add support for HPE GXP SoCs

Signed-off-by: Charles Kearney <charles.kearney@hpe.com>
Link: https://lore.kernel.org/r/20230920215339.4125856-2-charles.kearney@hpe.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: Alchemy: only build mmc support helpers if au1xmmc is enabled

[ Upstream commit ef8f8f04a0b25e8f294b24350e8463a8d6a9ba0b ]

While commit d4a5c59a955b ("mmc: au1xmmc: force non-modular build and
remove symbol_get usage") to be built in, it can still build a kernel
without MMC support and thuse no mmc_detect_change symbol at all.

Add ifdefs to build the mmc support code in the alchemy arch code
conditional on mmc support.

Fixes: d4a5c59a955b ("mmc: au1xmmc: force non-modular build and remove symbol_get usage")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vfio/mdev: Fix a null-ptr-deref bug for mdev_unregister_parent()

[ Upstream commit c777b11d34e0f47dbbc4b018ef65ad030f2b283a ]

Inject fault while probing mdpy.ko, if kstrdup() of create_dir() fails in
kobject_add_internal() in kobject_init_and_add() in mdev_type_add()
in parent_create_sysfs_files(), it will return 0 and probe successfully.
And when rmmod mdpy.ko, the mdpy_dev_exit() will call
mdev_unregister_parent(), the mdev_type_remove() may traverse uninitialized
parent->types[i] in parent_remove_sysfs_files(), and it will cause
below null-ptr-deref.

If mdev_type_add() fails, return the error code and kset_unregister()
to fix the issue.

 general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN
 KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
 CPU: 2 PID: 10215 Comm: rmmod Tainted: G        W        N 6.6.0-rc2+ #20
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
 RIP: 0010:__kobject_del+0x62/0x1c0
 Code: 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 51 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 8b 6b 28 48 8d 7d 10 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 24 01 00 00 48 8b 75 10 48 89 df 48 8d 6b 3c e8
 RSP: 0018:ffff88810695fd30 EFLAGS: 00010202
 RAX: dffffc0000000000 RBX: ffffffffa0270268 RCX: 0000000000000000
 RDX: 0000000000000002 RSI: 0000000000000004 RDI: 0000000000000010
 RBP: 0000000000000000 R08: 0000000000000001 R09: ffffed10233a4ef1
 R10: ffff888119d2778b R11: 0000000063666572 R12: 0000000000000000
 R13: fffffbfff404e2d4 R14: dffffc0000000000 R15: ffffffffa0271660
 FS:  00007fbc81981540(0000) GS:ffff888119d00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007fc14a142dc0 CR3: 0000000110a62003 CR4: 0000000000770ee0
 DR0: ffffffff8fb0bce8 DR1: ffffffff8fb0bce9 DR2: ffffffff8fb0bcea
 DR3: ffffffff8fb0bceb DR6: 00000000fffe0ff0 DR7: 0000000000000600
 PKRU: 55555554
 Call Trace:
  <TASK>
  ? die_addr+0x3d/0xa0
  ? exc_general_protection+0x144/0x220
  ? asm_exc_general_protection+0x22/0x30
  ? __kobject_del+0x62/0x1c0
  kobject_del+0x32/0x50
  parent_remove_sysfs_files+0xd6/0x170 [mdev]
  mdev_unregister_parent+0xfb/0x190 [mdev]
  ? mdev_register_parent+0x270/0x270 [mdev]
  ? find_module_all+0x9d/0xe0
  mdpy_dev_exit+0x17/0x63 [mdpy]
  __do_sys_delete_module.constprop.0+0x2fa/0x4b0
  ? module_flags+0x300/0x300
  ? __fput+0x4e7/0xa00
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x46/0xb0
 RIP: 0033:0x7fbc813221b7
 Code: 73 01 c3 48 8b 0d d1 8c 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a1 8c 2c 00 f7 d8 64 89 01 48
 RSP: 002b:00007ffe780e0648 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
 RAX: ffffffffffffffda RBX: 00007ffe780e06a8 RCX: 00007fbc813221b7
 RDX: 000000000000000a RSI: 0000000000000800 RDI: 000055e214df9b58
 RBP: 000055e214df9af0 R08: 00007ffe780df5c1 R09: 0000000000000000
 R10: 00007fbc8139ecc0 R11: 0000000000000206 R12: 00007ffe780e0870
 R13: 00007ffe780e0ed0 R14: 000055e214df9260 R15: 000055e214df9af0
  </TASK>
 Modules linked in: mdpy(-) mdev vfio_iommu_type1 vfio [last unloaded: mdpy]
 Dumping ftrace buffer:
    (ftrace buffer empty)
 ---[ end trace 0000000000000000 ]---
 RIP: 0010:__kobject_del+0x62/0x1c0
 Code: 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 51 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 8b 6b 28 48 8d 7d 10 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 24 01 00 00 48 8b 75 10 48 89 df 48 8d 6b 3c e8
 RSP: 0018:ffff88810695fd30 EFLAGS: 00010202
 RAX: dffffc0000000000 RBX: ffffffffa0270268 RCX: 0000000000000000
 RDX: 0000000000000002 RSI: 0000000000000004 RDI: 0000000000000010
 RBP: 0000000000000000 R08: 0000000000000001 R09: ffffed10233a4ef1
 R10: ffff888119d2778b R11: 0000000063666572 R12: 0000000000000000
 R13: fffffbfff404e2d4 R14: dffffc0000000000 R15: ffffffffa0271660
 FS:  00007fbc81981540(0000) GS:ffff888119d00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007fc14a142dc0 CR3: 0000000110a62003 CR4: 0000000000770ee0
 DR0: ffffffff8fb0bce8 DR1: ffffffff8fb0bce9 DR2: ffffffff8fb0bcea
 DR3: ffffffff8fb0bceb DR6: 00000000fffe0ff0 DR7: 0000000000000600
 PKRU: 55555554
 Kernel panic - not syncing: Fatal exception
 Dumping ftrace buffer:
    (ftrace buffer empty)
 Kernel Offset: disabled
 Rebooting in 1 seconds..

Fixes: da44c340c4fe ("vfio/mdev: simplify mdev_type handling")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230918115551.1423193-1-ruanjinjie@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: reset destination buffer when read_extent_buffer() gets invalid range

[ Upstream commit 74ee79142c0a344d4eae2eb7012ebc4e82254109 ]

Commit f98b6215d7d1 ("btrfs: extent_io: do extra check for extent buffer
read write functions") changed how we handle invalid extent buffer range
for read_extent_buffer().

Previously if the range is invalid we just set the destination to zero,
but after the patch we do nothing and error out.

This can lead to smatch static checker errors like:

  fs/btrfs/print-tree.c:186 print_uuid_item() error: uninitialized symbol 'subvol_id'.
  fs/btrfs/tests/extent-io-tests.c:338 check_eb_bitmap() error: uninitialized symbol 'has'.
  fs/btrfs/tests/extent-io-tests.c:353 check_eb_bitmap() error: uninitialized symbol 'has'.
  fs/btrfs/uuid-tree.c:203 btrfs_uuid_tree_remove() error: uninitialized symbol 'read_subid'.
  fs/btrfs/uuid-tree.c:353 btrfs_uuid_tree_iterate() error: uninitialized symbol 'subid_le'.
  fs/btrfs/uuid-tree.c:72 btrfs_uuid_tree_lookup() error: uninitialized symbol 'data'.
  fs/btrfs/volumes.c:7415 btrfs_dev_stats_value() error: uninitialized symbol 'val'.

Fix those warnings by reverting back to the old memset() behavior.
By this we keep the static checker happy and would still make a lot of
noise when such invalid ranges are passed in.

Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: f98b6215d7d1 ("btrfs: extent_io: do extra check for extent buffer read write functions")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdkfd: Insert missing TLB flush on GFX10 and later

[ Upstream commit edcfe22985d09ee8e2346c9217f5a52ab150099f ]

Heavy-weight TLB flush is required after unmap on all GPUs for
correctness and security.

Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdkfd: Flush TLB after unmapping for GFX v9.4.3

[ Upstream commit 75dda67c7213c3e0d17244a8c42547c27ee746f8 ]

kfd_flush_tlb_after_unmap should return true for GFX v9.4.3, to do TLB
heavyweight flush after unmapping from GPU to guarantee that the GPU
will not access pages after they have been unmapped. This also helps
improve the mapping to GPU performance.

Without this, KFD accidently flush TLB after mapping to GPU because the
vm update sequence number is increased by previous unmapping.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: edcfe22985d0 ("drm/amdkfd: Insert missing TLB flush on GFX10 and later")
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Use raw_smp_processor_id() instead of smp_processor_id()

[ Upstream commit 59f10a05b5c7b675256a66e3161741239889ff80 ]

The following call trace was observed:

localhost kernel: nvme nvme0: NVME-FC{0}: controller connect complete
localhost kernel: BUG: using smp_processor_id() in preemptible [00000000] code: kworker/u129:4/75092
localhost kernel: nvme nvme0: NVME-FC{0}: new ctrl: NQN "nqn.1992-08.com.netapp:sn.b42d198afb4d11ecad6d00a098d6abfa:subsystem.PR_Channel2022_RH84_subsystem_291"
localhost kernel: caller is qla_nvme_post_cmd+0x216/0x1380 [qla2xxx]
localhost kernel: CPU: 6 PID: 75092 Comm: kworker/u129:4 Kdump: loaded Tainted: G    B   W  OE    --------- ---  5.14.0-70.22.1.el9_0.x86_64+debug #1
localhost kernel: Hardware name: HPE ProLiant XL420 Gen10/ProLiant XL420 Gen10, BIOS U39 01/13/2022
localhost kernel: Workqueue: nvme-wq nvme_async_event_work [nvme_core]
localhost kernel: Call Trace:
localhost kernel: dump_stack_lvl+0x57/0x7d
localhost kernel: check_preemption_disabled+0xc8/0xd0
localhost kernel: qla_nvme_post_cmd+0x216/0x1380 [qla2xxx]

Use raw_smp_processor_id() instead of smp_processor_id().

Also use queue_work() across the driver instead of queue_work_on() thus
avoiding usage of smp_processor_id() when CONFIG_DEBUG_PREEMPT is enabled.

Cc: stable@vger.kernel.org
Suggested-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230831112146.32595-2-njavali@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Select qpair depending on which CPU post_cmd() gets called

[ Upstream commit 1d201c81d4cc6840735bbcc99e6031503e5cf3b8 ]

In current I/O path, Tx and Rx may not be processed on same CPU. This may
lead to thrashing and optimum performance may not be achieved.

Pick qpair such that Tx and Rx are processed on same CPU.

Signed-off-by: Shreyas Deodhar <sdeodhar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: 59f10a05b5c7 ("scsi: qla2xxx: Use raw_smp_processor_id() instead of smp_processor_id()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: ath11k: Cleanup mac80211 references on failure during tx_complete

[ Upstream commit 29d15589f084d71a4ea8c544039c5839db0236e2 ]

When a function is using functions from mac80211 to free an skb then it
should do it consistently and not switch to the generic dev_kfree_skb_any
(or similar functions). Otherwise (like in the error handlers), mac80211
will will not be aware of the freed skb and thus not clean up related
information in its internal data structures.

Not doing so lead in the past to filled up structure which then prevented
new clients to connect.

Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Fixes: 6257c702264c ("wifi: ath11k: fix tx status reporting in encap offload mode")
Cc: stable@vger.kernel.org
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230802-ath11k-ack_status_leak-v2-2-c0af729d6229@narfation.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: ath11k: fix tx status reporting in encap offload mode

[ Upstream commit 6257c702264c44d74c6b71f0c62a7665da2dc356 ]

ieee80211_tx_status() treats packets in 802.11 frame format and
tries to extract sta address from packet header. When tx encap
offload is enabled, this becomes invalid operation. Hence, switch
to using ieee80211_tx_status_ext() after filling in station
address for handling both 802.11 and 802.3 frames.

Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1

Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230403195738.25367-2-quic_pradeepc@quicinc.com
Stable-dep-of: 29d15589f084 ("wifi: ath11k: Cleanup mac80211 references on failure during tx_complete")
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved

[ Upstream commit 110e70fccce4f22b53986ae797d665ffb1950aa6 ]

Adding a reserved memory region for the framebuffer memory
(the splash memory region set up by the bootloader).

It fixes a kernel panic (arm-smmu: Unhandled context fault
at this particular memory region) reported on DB845c running
v5.10.y.

Cc: stable@vger.kernel.org # v5.10+
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230726132719.2117369-2-amit.pundir@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/pkey: fix PKEY_TYPE_EP11_AES handling in PKEY_CLR2SECK2 IOCTL

[ Upstream commit da2863f15945de100b95c72d5656541d30956c5d ]

Commit 'fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC
private keys")' introduced PKEY_TYPE_EP11_AES for the PKEY_CLR2SECK2
IOCTL to convert an AES clearkey into a securekey of this type.
Unfortunately, all PKEY_CLR2SECK2 IOCTL requests with type
PKEY_TYPE_EP11_AES return with an error (-EINVAL). Fix the handling
for PKEY_TYPE_EP11_AES in PKEY_CLR2SECK2 IOCTL, so that userspace can
convert clearkey blobs into PKEY_TYPE_EP11_AES securekey blobs.

Cc: stable@vger.kernel.org # v5.10+
Fixes: fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC private keys")
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: get out of a repeat loop when getting a locked data page

[ Upstream commit d2d9bb3b6d2fbccb5b33d3a85a2830971625a4ea ]

https://bugzilla.kernel.org/show_bug.cgi?id=216050

Somehow we're getting a page which has a different mapping.
Let's avoid the infinite loop.

Cc: <stable@vger.kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: optimize iteration over sparse directories

[ Upstream commit 59237a21776f70ffb0420611c23e7158e1317037 ]

Wei Chen reports a kernel bug as blew:

INFO: task syz-executor.0:29056 blocked for more than 143 seconds.
      Not tainted 5.15.0-rc5 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-executor.0  state:D stack:14632 pid:29056 ppid:  6574 flags:0x00000004
Call Trace:
 __schedule+0x4a1/0x1720
 schedule+0x36/0xe0
 rwsem_down_write_slowpath+0x322/0x7a0
 fscrypt_ioctl_set_policy+0x11f/0x2a0
 __f2fs_ioctl+0x1a9f/0x5780
 f2fs_ioctl+0x89/0x3a0
 __x64_sys_ioctl+0xe8/0x140
 do_syscall_64+0x34/0xb0
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Eric did some investigation on this issue, quoted from reply of Eric:

"Well, the quality of this bug report has a lot to be desired (not on
upstream kernel, reproducer is full of totally irrelevant stuff, not
sent to the mailing list of the filesystem whose disk image is being
fuzzed, etc.).  But what is going on is that f2fs_empty_dir() doesn't
consider the case of a directory with an extremely large i_size on a
malicious disk image.

Specifically, the reproducer mounts an f2fs image with a directory
that has an i_size of 14814520042850357248, then calls
FS_IOC_SET_ENCRYPTION_POLICY on it.

That results in a call to f2fs_empty_dir() to check whether the
directory is empty.  f2fs_empty_dir() then iterates through all
3616826182336513 blocks the directory allegedly contains to check
whether any contain anything.  i_rwsem is held during this, so
anything else that tries to take it will hang."

In order to solve this issue, let's use f2fs_get_next_page_offset()
to speed up iteration by skipping holes for all below functions:
- f2fs_empty_dir
- f2fs_readdir
- find_in_level

The way why we can speed up iteration was described in
'commit 3cf4574705b4 ("f2fs: introduce get_next_page_offset to speed
up SEEK_DATA")'.

Meanwhile, in f2fs_empty_dir(), let's use f2fs_find_data_page()
instead f2fs_get_lock_data_page(), due to i_rwsem was held in
caller of f2fs_empty_dir(), there shouldn't be any races, so it's
fine to not lock dentry page during lookuping dirents in the page.

Link: https://lore.kernel.org/lkml/536944df-a0ae-1dd8-148f-510b476e1347@kernel.org/T/
Reported-by: Wei Chen <harperchen1110@gmail.com>
Cc: Eric Biggers <ebiggers@google.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Stable-dep-of: d2d9bb3b6d2f ("f2fs: get out of a repeat loop when getting a locked data page")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: qcom: msm8974pro-castor: correct touchscreen syna,nosleep-mode

[ Upstream commit 7c74379afdfee7b13f1cd8ff1ad6e0f986aec96c ]

There is no syna,nosleep property in Synaptics RMI4 touchscreen:

  qcom-msm8974pro-sony-xperia-shinano-castor.dtb: synaptics@2c: rmi4-f01@1: 'syna,nosleep' does not match any of the regexes: 'pinctrl-[0-9]+'

Fixes: ab80661883de ("ARM: dts: qcom: msm8974: Add Sony Xperia Z2 Tablet")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230720115335.137354-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: qcom: msm8974pro-castor: correct touchscreen function names

[ Upstream commit 31fba16c19c45b2b3a7c23b0bfef80aed1b29050 ]

The node names for functions of Synaptics RMI4 touchscreen must be as
"rmi4-fXX", as required by bindings and Linux driver.

  qcom-msm8974pro-sony-xperia-shinano-castor.dtb: synaptics@2c: Unevaluated properties are not allowed ('rmi-f01@1', 'rmi-f11@11' were unexpected)

Fixes: ab80661883de ("ARM: dts: qcom: msm8974: Add Sony Xperia Z2 Tablet")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230720115335.137354-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: qcom: msm8974pro-castor: correct inverted X of touchscreen

[ Upstream commit 43db69268149049540b1d2bbe8a69e59d5cb43b6 ]

There is no syna,f11-flip-x property, so assume intention was to use
touchscreen-inverted-x.

Fixes: ab80661883de ("ARM: dts: qcom: msm8974: Add Sony Xperia Z2 Tablet")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230720115335.137354-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: samsung: exynos4210-i9100: Fix LCD screen's physical size

[ Upstream commit b3f3fc32e5ff1e848555af8616318cc667457f90 ]

The previous values were completely bogus, and resulted in the computed
DPI ratio being much lower than reality, causing applications and UIs to
misbehave.

The new values were measured by myself with a ruler.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Fixes: 8620cc2f99b7 ("ARM: dts: exynos: Add devicetree file for the Galaxy S2")
Cc: <stable@vger.kernel.org> # v5.8+
Link: https://lore.kernel.org/r/20230714153720.336990-1-paul@crapouillou.net
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: BCM5301X: Extend RAM to full 256MB for Linksys EA6500 V2

[ Upstream commit 91994e59079dcb455783d3f9ea338eea6f671af3 ]

Linksys ea6500-v2 have 256MB of ram. Currently we only use 128MB.
Expand the definition to use all the available RAM.

Fixes: 03e96644d7a8 ("ARM: dts: BCM5301X: Add basic DT for Linksys EA6500 V2")
Signed-off-by: Aleksey Nasibulin <alealexpro100@ya.ru>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20230712014017.28123-1-ansuelsmth@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: xiic: Correct return value check for xiic_reinit()

[ Upstream commit 59851fb05d759f13662be143eff0aae605815b0e ]

The error paths for xiic_reinit() return negative values on failure
and 0 on success - this error message therefore is triggered on
_success_ rather than failure. Correct the condition so it's only
shown on failure as intended.

Fixes: 8fa9c9388053 ("i2c: xiic: return value of xiic_reinit")
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: mux: gpio: Add missing fwnode_handle_put()

[ Upstream commit db6aee6083a56ac4a6cd1b08fff7938072bcd0a3 ]

In i2c_mux_gpio_probe_fw(), we should add fwnode_handle_put()
when break out of the iteration device_for_each_child_node()
as it will automatically increase and decrease the refcounter.

Fixes: 98b2b712bc85 ("i2c: i2c-mux-gpio: Enable this driver in ACPI land")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: mux: demux-pinctrl: check the return value of devm_kstrdup()

[ Upstream commit 7c0195fa9a9e263df204963f88a22b21688ffb66 ]

devm_kstrdup() returns pointer to allocated string on success,
NULL on failure. So it is better to check the return value of it.

Fixes: e35478eac030 ("i2c: mux: demux-pinctrl: run properly with multiple instances")
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: tb10x: Fix an error handling path in tb10x_gpio_probe()

[ Upstream commit b547b5e52a0587e6b25ea520bf2f9e03d00cbcb6 ]

If an error occurs after a successful irq_domain_add_linear() call, it
should be undone by a corresponding irq_domain_remove(), as already done
in the remove function.

Fixes: c6ce2b6bffe5 ("gpio: add TB10x GPIO driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: Fix UAF in cifs_demultiplex_thread()

[ Upstream commit d527f51331cace562393a8038d870b3e9916686f ]

There is a UAF when xfstests on cifs:

  BUG: KASAN: use-after-free in smb2_is_network_name_deleted+0x27/0x160
  Read of size 4 at addr ffff88810103fc08 by task cifsd/923

  CPU: 1 PID: 923 Comm: cifsd Not tainted 6.1.0-rc4+ #45
  ...
  Call Trace:
   <TASK>
   dump_stack_lvl+0x34/0x44
   print_report+0x171/0x472
   kasan_report+0xad/0x130
   kasan_check_range+0x145/0x1a0
   smb2_is_network_name_deleted+0x27/0x160
   cifs_demultiplex_thread.cold+0x172/0x5a4
   kthread+0x165/0x1a0
   ret_from_fork+0x1f/0x30
   </TASK>

  Allocated by task 923:
   kasan_save_stack+0x1e/0x40
   kasan_set_track+0x21/0x30
   __kasan_slab_alloc+0x54/0x60
   kmem_cache_alloc+0x147/0x320
   mempool_alloc+0xe1/0x260
   cifs_small_buf_get+0x24/0x60
   allocate_buffers+0xa1/0x1c0
   cifs_demultiplex_thread+0x199/0x10d0
   kthread+0x165/0x1a0
   ret_from_fork+0x1f/0x30

  Freed by task 921:
   kasan_save_stack+0x1e/0x40
   kasan_set_track+0x21/0x30
   kasan_save_free_info+0x2a/0x40
   ____kasan_slab_free+0x143/0x1b0
   kmem_cache_free+0xe3/0x4d0
   cifs_small_buf_release+0x29/0x90
   SMB2_negotiate+0x8b7/0x1c60
   smb2_negotiate+0x51/0x70
   cifs_negotiate_protocol+0xf0/0x160
   cifs_get_smb_ses+0x5fa/0x13c0
   mount_get_conns+0x7a/0x750
   cifs_mount+0x103/0xd00
   cifs_smb3_do_mount+0x1dd/0xcb0
   smb3_get_tree+0x1d5/0x300
   vfs_get_tree+0x41/0xf0
   path_mount+0x9b3/0xdd0
   __x64_sys_mount+0x190/0x1d0
   do_syscall_64+0x35/0x80
   entry_SYSCALL_64_after_hwframe+0x46/0xb0

The UAF is because:

 mount(pid: 921)               | cifsd(pid: 923)
-------------------------------|-------------------------------
                               | cifs_demultiplex_thread
SMB2_negotiate                 |
 cifs_send_recv                |
  compound_send_recv           |
   smb_send_rqst               |
    wait_for_response          |
     wait_event_state      [1] |
                               |  standard_receive3
                               |   cifs_handle_standard
                               |    handle_mid
                               |     mid->resp_buf = buf;  [2]
                               |     dequeue_mid           [3]
     KILL the process      [4] |
    resp_iov[i].iov_base = buf |
 free_rsp_buf              [5] |
                               |   is_network_name_deleted [6]
                               |   callback

1. After send request to server, wait the response until
    mid->mid_state != SUBMITTED;
2. Receive response from server, and set it to mid;
3. Set the mid state to RECEIVED;
4. Kill the process, the mid state already RECEIVED, get 0;
5. Handle and release the negotiate response;
6. UAF.

It can be easily reproduce with add some delay in [3] - [6].

Only sync call has the problem since async call's callback is
executed in cifsd process.

Add an extra state to mark the mid state to READY before wakeup the
waitter, then it can get the resp safely.

Fixes: ec637e3ffb6b ("[CIFS] Avoid extra large buffer allocation (and memcpy) in cifs_readpages")
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

proc: nommu: fix empty /proc/<pid>/maps

[ Upstream commit fe4419801617514765974f3e796269bc512ad146 ]

On no-MMU, /proc/<pid>/maps reads as an empty file.  This happens because
find_vma(mm, 0) always returns NULL (assuming no vma actually contains the
zero address, which is normally the case).

To fix this bug and improve the maintainability in the future, this patch
makes the no-MMU implementation as similar as possible to the MMU
implementation.

The only remaining differences are the lack of hold/release_task_mempolicy
and the extra code to shoehorn the gate vma into the iterator.

This has been tested on top of 6.5.3 on an STM32F746.

Link: https://lkml.kernel.org/r/20230915160055.971059-2-ben.wolsieffer@hefring.com
Fixes: 0c563f148043 ("proc: remove VMA rbtree use from nommu")
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

proc: nommu: /proc/<pid>/maps: release mmap read lock

[ Upstream commit 578d7699e5c2add8c2e9549d9d75dfb56c460cb3 ]

The no-MMU implementation of /proc/<pid>/map doesn't normally release
the mmap read lock, because it uses !IS_ERR_OR_NULL(_vml) to determine
whether to release the lock.  Since _vml is NULL when the end of the
mappings is reached, the lock is not released.

Reading /proc/1/maps twice doesn't cause a hang because it only
takes the read lock, which can be taken multiple times and therefore
doesn't show any problem if the lock isn't released. Instead, you need
to perform some operation that attempts to take the write lock after
reading /proc/<pid>/maps. To actually reproduce the bug, compile the
following code as 'proc_maps_bug':

#include <stdio.h>
#include <unistd.h>
#include <sys/mman.h>

int main(int argc, char *argv[]) {
        void *buf;
        sleep(1);
        buf = mmap(NULL, 4096, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
        puts("mmap returned");
        return 0;
}

Then, run:

  ./proc_maps_bug &; cat /proc/$!/maps; fg

Without this patch, mmap() will hang and the command will never
complete.

This code was incorrectly adapted from the MMU implementation, which at
the time released the lock in m_next() before returning the last entry.

The MMU implementation has diverged further from the no-MMU version since
then, so this patch brings their locking and error handling into sync,
fixing the bug and hopefully avoiding similar issues in the future.

Link: https://lkml.kernel.org/r/20230914163019.4050530-2-ben.wolsieffer@hefring.com
Fixes: 47fecca15c09 ("fs/proc/task_nommu.c: don't use priv->task->mm")
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: fe4419801617 ("proc: nommu: fix empty /proc/<pid>/maps")
Signed-off-by: Sasha Levin <sashal@kernel.org>

igc: Expose tx-usecs coalesce setting to user

[ Upstream commit 1703b2e0de653b459ca6230be32ce7f2ea0ae7ee ]

When users attempt to obtain the coalesce setting using the
ethtool command, current code always returns 0 for tx-usecs.
This is because I225/6 always uses a queue pair setting, hence
tx_coalesce_usecs does not return a value during the
igc_ethtool_get_coalesce() callback process. The pair queue
condition checking in igc_ethtool_get_coalesce() is removed by
this patch so that the user gets information of the value of tx-usecs.

Even if i225/6 is using queue pair setting, there is no harm in
notifying the user of the tx-usecs. The implementation of the current
code may have previously been a copy of the legacy code i210.
Since I225 has the queue pair setting enabled, tx-usecs will always adhere
to the user-set rx-usecs value. An error message will appear when the user
attempts to set the tx-usecs value for the input parameters because,
by default, they should only set the rx-usecs value.

This patch also adds the helper function to get the
previous rx coalesce value similar to tx coalesce.

How to test:
User can get the coalesce value using ethtool command.

Example command:
Get: ethtool -c <interface>

Previous output:

rx-usecs: 3
rx-frames: n/a
rx-usecs-irq: n/a
rx-frames-irq: n/a

tx-usecs: 0
tx-frames: n/a
tx-usecs-irq: n/a
tx-frames-irq: n/a

New output:

rx-usecs: 3
rx-frames: n/a
rx-usecs-irq: n/a
rx-frames-irq: n/a

tx-usecs: 3
tx-frames: n/a
tx-usecs-irq: n/a
tx-frames-irq: n/a

Fixes: 8c5ad0dae93c ("igc: Add ethtool support")
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230919170331.1581031-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-pf: Do xdp_do_flush() after redirects.

[ Upstream commit 70b2b6892645e58ed6f051dad7f8d1083f0ad553 ]

xdp_do_flush() should be invoked before leaving the NAPI poll function
if XDP-redirect has been performed.

Invoke xdp_do_flush() before leaving NAPI.

Cc: Geetha sowjanya <gakula@marvell.com>
Cc: Subbaraya Sundeep <sbhatta@marvell.com>
Cc: Sunil Goutham <sgoutham@marvell.com>
Cc: hariprasad <hkelam@marvell.com>
Fixes: 06059a1a9a4a5 ("octeontx2-pf: Add XDP support to netdev PF")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Geethasowjanya Akula <gakula@marvell.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Flush XDP for bnxt_poll_nitroa0()'s NAPI

[ Upstream commit edc0140cc3b7b91874ebe70eb7d2a851e8817ccc ]

bnxt_poll_nitroa0() invokes bnxt_rx_pkt() which can run a XDP program
which in turn can return XDP_REDIRECT. bnxt_rx_pkt() is also used by
__bnxt_poll_work() which flushes (xdp_do_flush()) the packets after each
round. bnxt_poll_nitroa0() lacks this feature.
xdp_do_flush() should be invoked before leaving the NAPI callback.

Invoke xdp_do_flush() after a redirect in bnxt_poll_nitroa0() NAPI.

Cc: Michael Chan <michael.chan@broadcom.com>
Fixes: f18c2b77b2e4e ("bnxt_en: optimized XDP_REDIRECT support")
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ena: Flush XDP packets on error.

[ Upstream commit 6f411fb5ca9419090bee6a0a46425e0a5060b734 ]

xdp_do_flush() should be invoked before leaving the NAPI poll function
after a XDP-redirect. This is not the case if the driver leaves via
the error path (after having a redirect in one of its previous
iterations).

Invoke xdp_do_flush() also in the error path.

Cc: Arthur Kiyanovski <akiyano@amazon.com>
Cc: David Arinzon <darinzon@amazon.com>
Cc: Noam Dagan <ndagan@amazon.com>
Cc: Saeed Bishara <saeedb@amazon.com>
Cc: Shay Agroskin <shayagr@amazon.com>
Fixes: a318c70ad152b ("net: ena: introduce XDP redirect implementation")
Acked-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

locking/seqlock: Do the lockdep annotation before locking in do_write_seqcount_begin_nested()

[ Upstream commit 41b43b6c6e30a832c790b010a06772e793bca193 ]

It was brought up by Tetsuo that the following sequence:

   write_seqlock_irqsave()
   printk_deferred_enter()

could lead to a deadlock if the lockdep annotation within
write_seqlock_irqsave() triggers.

The problem is that the sequence counter is incremented before the lockdep
annotation is performed. The lockdep splat would then attempt to invoke
printk() but the reader side, of the same seqcount, could have a
tty_port::lock acquired waiting for the sequence number to become even again.

The other lockdep annotations come before the actual locking because "we
want to see the locking error before it happens". There is no reason why
seqcount should be different here.

Do the lockdep annotation first then perform the locking operation (the
sequence increment).

Fixes: 1ca7d67cf5d5a ("seqcount: Add lockdep functionality to seqcount/seqlock structures")
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230920104627._DTHgPyA@linutronix.de
Closes: https://lore.kernel.org/20230621130641.-5iueY1I@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

i915/pmu: Move execlist stats initialization to execlist specific setup

[ Upstream commit c524cd40e8a2a1a36f4898eaf2024beefeb815f3 ]

engine->stats is a union of execlist and guc stat objects. When execlist
specific fields are initialized, the initial state of guc stats is
affected. This results in bad busyness values when using GuC mode. Move
the execlist initialization from common code to execlist specific code.

Fixes: 77cdd054dd2c ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230912212247.1828681-1-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 4485bd519f5d6d620a29d0547ff3c982bdeeb468)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: ipset: Fix race between IPSET_CMD_CREATE and IPSET_CMD_SWAP

[ Upstream commit 7433b6d2afd512d04398c73aa984d1e285be125b ]

Kyle Zeng reported that there is a race between IPSET_CMD_ADD and IPSET_CMD_SWAP
in netfilter/ip_set, which can lead to the invocation of `__ip_set_put` on a
wrong `set`, triggering the `BUG_ON(set->ref == 0);` check in it.

The race is caused by using the wrong reference counter, i.e. the ref counter instead
of ref_netlink.

Fixes: 24e227896bbf ("netfilter: ipset: Add schedule point in call_ad().")
Reported-by: Kyle Zeng <zengyhkyle@gmail.com>
Closes: https://lore.kernel.org/netfilter-devel/ZPZqetxOmH+w%2Fmyc@westworld/#r
Tested-by: Kyle Zeng <zengyhkyle@gmail.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: disable toggling dormant table state more than once

[ Upstream commit c9bd26513b3a11b3adb3c2ed8a31a01a87173ff1 ]

nft -f -<<EOF
add table ip t
add table ip t { flags dormant; }
add chain ip t c { type filter hook input priority 0; }
add table ip t
EOF

Triggers a splat from nf core on next table delete because we lose
track of right hook register state:

WARNING: CPU: 2 PID: 1597 at net/netfilter/core.c:501 __nf_unregister_net_hook
RIP: 0010:__nf_unregister_net_hook+0x41b/0x570
 nf_unregister_net_hook+0xb4/0xf0
 __nf_tables_unregister_hook+0x160/0x1d0
[..]

The above should have table in *active* state, but in fact no
hooks were registered.

Reject on/off/on games rather than attempting to fix this.

Fixes: 179d9ba5559a ("netfilter: nf_tables: fix table flag updates")
Reported-by: "Lee, Cherie-Anne" <cherie.lee@starlabs.sg>
Cc: Bing-Jhong Billy Jheng <billy@starlabs.sg>
Cc: info@starlabs.sg
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: rds: Fix possible NULL-pointer dereference

[ Upstream commit f1d95df0f31048f1c59092648997686e3f7d9478 ]

In rds_rdma_cm_event_handler_cmn() check, if conn pointer exists
before dereferencing it as rdma_set_service_type() argument

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: fd261ce6a30e ("rds: rdma: update rdma transport for tos")
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

team: fix null-ptr-deref when team device type is changed

[ Upstream commit 492032760127251e5540a5716a70996bacf2a3fd ]

Get a null-ptr-deref bug as follows with reproducer [1].

BUG: kernel NULL pointer dereference, address: 0000000000000228
...
RIP: 0010:vlan_dev_hard_header+0x35/0x140 [8021q]
...
Call Trace:
 <TASK>
 ? __die+0x24/0x70
 ? page_fault_oops+0x82/0x150
 ? exc_page_fault+0x69/0x150
 ? asm_exc_page_fault+0x26/0x30
 ? vlan_dev_hard_header+0x35/0x140 [8021q]
 ? vlan_dev_hard_header+0x8e/0x140 [8021q]
 neigh_connected_output+0xb2/0x100
 ip6_finish_output2+0x1cb/0x520
 ? nf_hook_slow+0x43/0xc0
 ? ip6_mtu+0x46/0x80
 ip6_finish_output+0x2a/0xb0
 mld_sendpack+0x18f/0x250
 mld_ifc_work+0x39/0x160
 process_one_work+0x1e6/0x3f0
 worker_thread+0x4d/0x2f0
 ? __pfx_worker_thread+0x10/0x10
 kthread+0xe5/0x120
 ? __pfx_kthread+0x10/0x10
 ret_from_fork+0x34/0x50
 ? __pfx_kthread+0x10/0x10
 ret_from_fork_asm+0x1b/0x30

[1]
$ teamd -t team0 -d -c '{"runner": {"name": "loadbalance"}}'
$ ip link add name t-dummy type dummy
$ ip link add link t-dummy name t-dummy.100 type vlan id 100
$ ip link add name t-nlmon type nlmon
$ ip link set t-nlmon master team0
$ ip link set t-nlmon nomaster
$ ip link set t-dummy up
$ ip link set team0 up
$ ip link set t-dummy.100 down
$ ip link set t-dummy.100 master team0

When enslave a vlan device to team device and team device type is changed
from non-ether to ether, header_ops of team device is changed to
vlan_header_ops. That is incorrect and will trigger null-ptr-deref
for vlan->real_dev in vlan_dev_hard_header() because team device is not
a vlan device.

Cache eth_header_ops in team_setup(), then assign cached header_ops to
header_ops of team net device when its type is changed from non-ether
to ether to fix the bug.

Fixes: 1d76efe1577b ("team: add support for non-ethernet devices")
Suggested-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230918123011.1884401-1-william.xuanziyang@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: bridge: use DEV_STATS_INC()

[ Upstream commit 44bdb313da57322c9b3c108eb66981c6ec6509f4 ]

syzbot/KCSAN reported data-races in br_handle_frame_finish() [1]
This function can run from multiple cpus without mutual exclusion.

Adopt SMP safe DEV_STATS_INC() to update dev->stats fields.

Handles updates to dev->stats.tx_dropped while we are at it.

[1]
BUG: KCSAN: data-race in br_handle_frame_finish / br_handle_frame_finish

read-write to 0xffff8881374b2178 of 8 bytes by interrupt on cpu 1:
br_handle_frame_finish+0xd4f/0xef0 net/bridge/br_input.c:189
br_nf_hook_thresh+0x1ed/0x220
br_nf_pre_routing_finish_ipv6+0x50f/0x540
NF_HOOK include/linux/netfilter.h:304 [inline]
br_nf_pre_routing_ipv6+0x1e3/0x2a0 net/bridge/br_netfilter_ipv6.c:178
br_nf_pre_routing+0x526/0xba0 net/bridge/br_netfilter_hooks.c:508
nf_hook_entry_hookfn include/linux/netfilter.h:144 [inline]
nf_hook_bridge_pre net/bridge/br_input.c:272 [inline]
br_handle_frame+0x4c9/0x940 net/bridge/br_input.c:417
__netif_receive_skb_core+0xa8a/0x21e0 net/core/dev.c:5417
__netif_receive_skb_one_core net/core/dev.c:5521 [inline]
__netif_receive_skb+0x57/0x1b0 net/core/dev.c:5637
process_backlog+0x21f/0x380 net/core/dev.c:5965
__napi_poll+0x60/0x3b0 net/core/dev.c:6527
napi_poll net/core/dev.c:6594 [inline]
net_rx_action+0x32b/0x750 net/core/dev.c:6727
__do_softirq+0xc1/0x265 kernel/softirq.c:553
run_ksoftirqd+0x17/0x20 kernel/softirq.c:921
smpboot_thread_fn+0x30a/0x4a0 kernel/smpboot.c:164
kthread+0x1d7/0x210 kernel/kthread.c:388
ret_from_fork+0x48/0x60 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304

read-write to 0xffff8881374b2178 of 8 bytes by interrupt on cpu 0:
br_handle_frame_finish+0xd4f/0xef0 net/bridge/br_input.c:189
br_nf_hook_thresh+0x1ed/0x220
br_nf_pre_routing_finish_ipv6+0x50f/0x540
NF_HOOK include/linux/netfilter.h:304 [inline]
br_nf_pre_routing_ipv6+0x1e3/0x2a0 net/bridge/br_netfilter_ipv6.c:178
br_nf_pre_routing+0x526/0xba0 net/bridge/br_netfilter_hooks.c:508
nf_hook_entry_hookfn include/linux/netfilter.h:144 [inline]
nf_hook_bridge_pre net/bridge/br_input.c:272 [inline]
br_handle_frame+0x4c9/0x940 net/bridge/br_input.c:417
__netif_receive_skb_core+0xa8a/0x21e0 net/core/dev.c:5417
__netif_receive_skb_one_core net/core/dev.c:5521 [inline]
__netif_receive_skb+0x57/0x1b0 net/core/dev.c:5637
process_backlog+0x21f/0x380 net/core/dev.c:5965
__napi_poll+0x60/0x3b0 net/core/dev.c:6527
napi_poll net/core/dev.c:6594 [inline]
net_rx_action+0x32b/0x750 net/core/dev.c:6727
__do_softirq+0xc1/0x265 kernel/softirq.c:553
do_softirq+0x5e/0x90 kernel/softirq.c:454
__local_bh_enable_ip+0x64/0x70 kernel/softirq.c:381
__raw_spin_unlock_bh include/linux/spinlock_api_smp.h:167 [inline]
_raw_spin_unlock_bh+0x36/0x40 kernel/locking/spinlock.c:210
spin_unlock_bh include/linux/spinlock.h:396 [inline]
batadv_tt_local_purge+0x1a8/0x1f0 net/batman-adv/translation-table.c:1356
batadv_tt_purge+0x2b/0x630 net/batman-adv/translation-table.c:3560
process_one_work kernel/workqueue.c:2630 [inline]
process_scheduled_works+0x5b8/0xa30 kernel/workqueue.c:2703
worker_thread+0x525/0x730 kernel/workqueue.c:2784
kthread+0x1d7/0x210 kernel/kthread.c:388
ret_from_fork+0x48/0x60 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304

value changed: 0x00000000000d7190 -> 0x00000000000d7191

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 14848 Comm: kworker/u4:11 Not tainted 6.6.0-rc1-syzkaller-00236-gad8a69f361b9 #0

Fixes: 1c29fc4989bc ("[BRIDGE]: keep track of received multicast packets")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Roopa Prabhu <roopa@nvidia.com>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: bridge@lists.linux-foundation.org
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230918091351.1356153-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: add 5ms delay before clear firmware reset irq source

[ Upstream commit 0770063096d5da4a8e467b6e73c1646a75589628 ]

Currently the reset process in hns3 and firmware watchdog init process is
asynchronous. we think firmware watchdog initialization is completed
before hns3 clear the firmware interrupt source. However, firmware
initialization may not complete early.

so we add delay before hns3 clear firmware interrupt source and 5 ms delay
is enough to avoid second firmware reset interrupt.

Fixes: c1a81619d73a ("net: hns3: Add mailbox interrupt handling to PF driver")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: fix fail to delete tc flower rules during reset issue

[ Upstream commit 1a7be66e4685b8541546222c305cce9710718a88 ]

Firmware does not respond driver commands during reset
Therefore, rule will fail to delete while the firmware is resetting

So, if failed to delete rule, set rule state to TO_DEL,
and the rule will be deleted when periodic task being scheduled.

Fixes: 0205ec041ec6 ("net: hns3: add support for hw tc offload of tc flower")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: only enable unicast promisc when mac table full

[ Upstream commit f2ed304922a55690529bcca59678dd92d7466ce8 ]

Currently, the driver will enable unicast promisc for the function
once configure mac address fail. It's unreasonable when the failure
is caused by using same mac address with other functions. So only
enable unicast promisc when mac table full.

Fixes: c631c696823c ("net: hns3: refactor the promisc mode setting")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: fix GRE checksum offload issue

[ Upstream commit f9f651261130cdcb7adc9a3e365b356bc2749ab3 ]

The device_version V3 hardware can't offload the checksum for IP in GRE
packets, but can do it for NvGRE. So default to disable the checksum and
GSO offload for GRE, but keep the ability to enable it when only using
NvGRE.

Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: add cmdq check for vf periodic service task

[ Upstream commit bd3caddf299a640efb66c6022efed7fe744db626 ]

When the vf cmdq is disabled, there is no need to keep these task running.
So this patch skip these task when the cmdq is disabled.

Fixes: ff200099d271 ("net: hns3: remove unnecessary work in hclgevf_main")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>