Cristian Iorga [Thu, 24 Apr 2014 09:19:06 +0000 (12:19 +0300)]
iproute2: upgrade to 3.14
- switched to ${BP} variable;
- removed parallel make restriction;
(From OE-Core rev:
c27e1c8961e438f2c354ce3cd7682eaf98231776)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cristian Iorga [Thu, 24 Apr 2014 09:19:05 +0000 (12:19 +0300)]
harfbuzz: upgrade to 0.9.27
(From OE-Core rev:
76447043a36472b7f673b423d584199d9d3dec8b)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cristian Iorga [Thu, 24 Apr 2014 09:19:04 +0000 (12:19 +0300)]
bluez5: upgrade to 5.18
(From OE-Core rev:
9713a7ce28669db2456400f280ea19b67401e3f9)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cristian Iorga [Thu, 24 Apr 2014 09:19:03 +0000 (12:19 +0300)]
connman: upgrade to 1.23
- License file copyright years updated;
(From OE-Core rev:
4c6b7634c21261f13b40036998b8204f8e3dee13)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 24 Apr 2014 14:24:09 +0000 (15:24 +0100)]
gcc-cross-initial: Separate out libgcc-initial
Its useful to separate out the native (cross) binaries from the target
compilation. We already do this for libgcc, this now takes the same
approach for -initial.
(From OE-Core rev:
8a2aaf8b6bdca2d28c0047093c7f668750d57666)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 24 Apr 2014 09:19:42 +0000 (10:19 +0100)]
gcc-cross: Improve handling of unwind.h
Rather than building the whole of libgcc to obtain the unwind.h header
file, simply configure it and then install the file. This avoids copying
chunks of data around when we don't need to and building the same thing
twice.
After doing this we need to make sure the target build directory exists
in the libgcc case since it will no longer be created automatically.
(From OE-Core rev:
459e4dc25462771038459567c22e87d4cd38b117)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 24 Apr 2014 09:18:42 +0000 (10:18 +0100)]
libgcc: Spit out common code into libgcc-common.inc
Prepare the ground for the creation of libgcc-initial by splitting common
libgcc code into a libgcc-common.inc file.
(From OE-Core rev:
7c9f4a22d5c14d768be872beb9fc798163d6d204)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 24 Apr 2014 09:18:03 +0000 (10:18 +0100)]
gcc: Convert to use hardlinkdir
(From OE-Core rev:
204bc1f39030a3c0dd3eadadabb013aca8bb9cc6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 24 Apr 2014 09:17:18 +0000 (10:17 +0100)]
utils: Add hardlinkdir shell function
In a number of places it would be helpful to be able to copy trees of
files using hardlinks. This turns out to be harder than you'd expect
since there is no good single command that does this well and handles
all file types correctly.
Abstracting this into a function therefore makes sense, cpio seems
as good an option as any other.
(From OE-Core rev:
14ef03182e1e5fe7cf6b4112f29e6609631aa78d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 24 Apr 2014 16:53:14 +0000 (17:53 +0100)]
build-appliance-image: Update to head revision
(From OE-Core rev:
866d2854139e0b00063dde06bc3a34d635ae2fc8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mike Crowe [Wed, 16 Apr 2014 09:31:36 +0000 (10:31 +0100)]
native.bbclass: Override TARGET_ flags too
TARGET_LDFLAGS is currently defined in bitbake.conf to contain
${TARGET_LINK_HASH_STYLE} which differs between MIPS and other
targets. Since TARGET_LDFLAGS is an exported variable it affects the hash
of every shell task even if it is not used.
We don't want native recipe tasks to have different hashes purely because
they happen to have been built in order to satisfy dependencies for
different MACHINEs since this causes lots of churn in the native sysroot
when switching between MACHINEs.
Making native.bbclass override TARGET_LDFLAGS to use BUILD_LDFLAGS ensures
consistent hashes and is a sensible thing to be doing anyway.
Although they don't appear to have the same detrimental affect on task
hashes TARGET_CPPFLAGS, TARGET_CFLAGS and TARGET_CXXFLAGS should be
overridden too.
(From OE-Core rev:
05a70ac30b37cab0952f1b9df501993a9dec70da)
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Denys Dmytriyenko [Thu, 10 Apr 2014 17:55:28 +0000 (13:55 -0400)]
cryptodev-tests: recipe for cryptodev test suite based on OpenSSL
(From OE-Core rev:
c54fa061da6195081cd29817a351a36377b58e53)
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Denys Dmytriyenko [Thu, 10 Apr 2014 17:55:27 +0000 (13:55 -0400)]
cryptodev-module: recipe for out-of-tree cryptodev device driver
Depends on cryptodev-linux for providing a header file
(From OE-Core rev:
b7587d2ef7642dcc248744ade8f85f815185e78c)
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Denys Dmytriyenko [Thu, 10 Apr 2014 17:55:26 +0000 (13:55 -0400)]
cryptodev-linux: create common .inc file to be shared by module and tests
(From OE-Core rev:
a3a834cf9f35682655661a7c6ba66c1de3491320)
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Denys Dmytriyenko [Thu, 10 Apr 2014 17:55:25 +0000 (13:55 -0400)]
cryptodev-linux: move to recipes-kernel to be shared with module and tests
(From OE-Core rev:
e7aace7658fabe41839a3ec1b596bf28c6a4c02e)
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Chen Qi [Wed, 23 Apr 2014 09:40:53 +0000 (17:40 +0800)]
tcf-agent: add systemd support
Add systemd unit file tcf-agent.service.
(From OE-Core rev:
1a4feebf98780f586bf2e81cf9844e6805a50799)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Chen Qi [Wed, 23 Apr 2014 09:40:52 +0000 (17:40 +0800)]
ppp: add systemd support
Add systemd support for ppp.
The unit file mostly comes from ArchLinux.
(From OE-Core rev:
e84f7ea24b08e3127b70731908b819fbdc1cbfd5)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Chen Qi [Wed, 23 Apr 2014 09:40:51 +0000 (17:40 +0800)]
bind: add systemd support
Add systemd support for bind.
(From OE-Core rev:
812f69fee5fceef853c42960f3d90491bda8378a)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Chen Qi [Wed, 23 Apr 2014 09:40:50 +0000 (17:40 +0800)]
cronie: add systemd support
Add systemd support for cronie.
(From OE-Core rev:
8a92601f8a2030f7875ee1fc6f09fd8242bd7e0d)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Saul Wold [Tue, 22 Apr 2014 23:42:25 +0000 (16:42 -0700)]
report-error: Add posting in the public note
(From OE-Core rev:
c2eb5cd1aa4632f7ee8c261414e599dcb6f40a8b)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Saul Wold [Tue, 22 Apr 2014 23:49:32 +0000 (16:49 -0700)]
libnl: update to 3.2.24
Remove patch that is now in the upstream version
Add new package for idiag libraries.
(From OE-Core rev:
407db800da02032e07e94b0b837a89cfb3e204a0)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Saul Wold [Tue, 22 Apr 2014 23:49:31 +0000 (16:49 -0700)]
sqlite3: Update to 3080403
And rename the PV to match the upstream versioning
This requires a PE Bump to ensure package versions don't
go backwards.
(From OE-Core rev:
dbcb25038959e4cf252ba812176a112a49a382d5)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Saul Wold [Tue, 22 Apr 2014 23:49:30 +0000 (16:49 -0700)]
util-macros: update to 1.19.0
(From OE-Core rev:
79a849f86161e506655b5d2b0cff81fa63408af5)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Saul Wold [Tue, 22 Apr 2014 23:49:29 +0000 (16:49 -0700)]
libxkbcommon: update to 0.4.1
(From OE-Core rev:
21562ba0c4746d9c63779d63996109200454c088)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Saul Wold [Tue, 22 Apr 2014 23:49:28 +0000 (16:49 -0700)]
msmtp: update to 1.4.32
(From OE-Core rev:
f7cf5fa6fff149e30472ad5123eae7bb68169b2c)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Saul Wold [Tue, 22 Apr 2014 23:49:26 +0000 (16:49 -0700)]
man-pages: update to 3.64
(From OE-Core rev:
5a4fa113ee49f916daddba8ef340649ac788101c)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Saul Wold [Tue, 22 Apr 2014 23:49:25 +0000 (16:49 -0700)]
lsbinitscripts: update to 9.53
(From OE-Core rev:
96c8ef95c9e491485c33bb89f2edc67d63b0a0b5)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Saul Wold [Tue, 22 Apr 2014 23:49:24 +0000 (16:49 -0700)]
cups: update to 1.7.2
(From OE-Core rev:
7286cc71dc7641ce08bf0a0f13e1e90a4a5470c8)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Saul Wold [Tue, 22 Apr 2014 23:49:23 +0000 (16:49 -0700)]
help2man update to 1.44.1
(From OE-Core rev:
dde45f7da96ce9a3afb5713ea84f18f42541a002)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Fri, 18 Apr 2014 21:27:47 +0000 (23:27 +0200)]
gsettings-desktop-schemas: add missing dependency on intltool-native
* do_configure fails with:
| NOTE: Executing intltoolize --copy --force --automake
| /home/jenkins/oe/shr-core-branches/shr-core/tmp-eglibc/work/armv5te-oe-linux-gnueabi/gsettings-desktop-schemas/3.10.1-r1/temp/run.do_configure.1111: 180:
/home/jenkins/oe/shr-core-branches/shr-core/tmp-eglibc/work/armv5te-oe-linux-gnueabi/gsettings-desktop-schemas/3.10.1-r1/temp/run.do_configure.1111:
intltoolize: not found
| WARNING: exit code 127 from a shell command.
| ERROR: Function failed: do_configure (log file is located at
/home/jenkins/oe/shr-core-branches/shr-core/tmp-eglibc/work/armv5te-oe-linux-gnueabi/gsettings-desktop-schemas/3.10.1-r1/temp/log.do_configure.1111)
NOTE: recipe gsettings-desktop-schemas-3.10.1-r1: task do_configure:
* introduced in:
commit
1138976f7bdcd24ef57451a2c2ceffa43666610f
Author: Alexandru Palalau <alexandrux.palalau@linux.intel.com>
Date: Tue Mar 11 13:27:46 2014 +0000
gsettings-desktop-schemas: removed unneeded class inheritance
(From OE-Core rev:
4a159a086db42467c310b1fa80fee13c53168729)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Joe Slater [Fri, 18 Apr 2014 22:38:35 +0000 (15:38 -0700)]
apr: do not try to use sctp.h
If we let configure look for sctp.h it might find it
on the host, so suppress the search with two cached
config variables.
(From OE-Core rev:
4aa6616661cc7a0eda4e9ba3e82a22472b444595)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mike Looijmans [Sun, 20 Apr 2014 12:39:38 +0000 (14:39 +0200)]
PR bumps to remove PRINC use in meta-openpli
Resolves warnings of this kind in the OpenPLi layer:
WARNING: Use of PRINC * was detected in the recipe *
(From OE-Core rev:
5ffb38d6ace7faae839c8cac7327b5b1c2daae1a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jacob Kroon [Mon, 21 Apr 2014 10:23:00 +0000 (12:23 +0200)]
console-tools: Remove floating runtime dependency on flex
The 'loadkeys' program defines its own yywrap()/yylex() functions,
there is no need to link with flex shared library.
(From OE-Core rev:
69a7c9345360b61eda79f818775656fc1aa9932c)
Signed-off-by: Jacob Kroon <jacob.kroon@mikrodidakt.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adrian Calianu [Tue, 22 Apr 2014 08:04:14 +0000 (10:04 +0200)]
oprofileui-server_git: add avahi-daemon to RDEPENDS list
oprofileui-server recipe depends on avahi recipe. But avahi recipe
generates more packages and one of those packages(avahi-daemon) which
oprofileui-server expected to be available is not found into image.
A runtime dependency of oprofileui-server on avahi-daemon is required.
Upstream-Status: Pending
(From OE-Core rev:
1163b6e619102bea08c429e49a4792abfa234c1c)
Signed-off-by: Adrian Calianu <adrian.calianu@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Koen Kooi [Thu, 17 Apr 2014 09:07:38 +0000 (11:07 +0200)]
liberror-perl: add 0.17022
This is needed for git-perltools to work:
koen@beast:/build/v2014.06/sources/meta-openembedded$ git send-email -M -1 --to openembedded-devel@lists.openembedded.org --subject-prefix=meta-oe][PATCH
Can't locate Error.pm in @INC (@INC contains: /usr/lib/perl/5.14.3 /etc/perl /usr/lib/perl/site_perl/5.14.3/ /usr/lib/perl/site_perl/5.14.3 /usr/lib/perl/vendor_perl/5.14.3/ /usr/lib/perl/vendor_perl/5.14.3 /usr/lib/perl/5.14.3/ /usr/local/lib/site_perl .) at /usr/lib/git/git-core/git-send-email line 30.
(From OE-Core rev:
b4f453e435739b2a692980a87504393156aaaaf5)
Signed-off-by: Koen Kooi <koen.kooi@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Maxin B. John [Wed, 23 Apr 2014 12:41:39 +0000 (14:41 +0200)]
libpng: bump to 1.6.10
1. Fixes CVE-2014-0333
2. There are changes in License checksums. This is due to new
contributor names being added to LICENSE and png.h file
contains version of the new release.So, license remains the same.
(From OE-Core rev:
270e82399915d1f620756e380464f984c8a2cda8)
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Joe Slater [Tue, 22 Apr 2014 18:00:41 +0000 (11:00 -0700)]
pixbufcache: add error exit in pixbufcache_sstate_postinst
In order to attempt recovery of a failed populate_sysroot_setscene,
we need to explicitly error exit an SSTATEPOSTINSTFUNC. So, we test
the return value of gdk-pixbuf-query-loaders.
(From OE-Core rev:
17bdb2538e6b723e11afb1079c71363603dba63d)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 27 Feb 2014 17:55:50 +0000 (17:55 +0000)]
autotools: Enable separate builddir by default
(From OE-Core rev:
baf5b230af919b6b0fd14ac5fc3e734bf7c464d5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sun, 13 Apr 2014 10:49:45 +0000 (11:49 +0100)]
bitbake: bitbake-worker: Drop BBHASH variables
Iterating through and calling setVar on this number of variables has significant
overhead in the profiling data. By not setting this, we save 3,000 calls
to setVar which gives a noticeable improvement to the speed of task execution.
The BBHASH variables have since been replaced by accessing that data through
the siggen code and going forward, that is the preferred way work with it.
(Bitbake rev:
92526eadd09d19938762290e0492076174367583)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sun, 13 Apr 2014 10:48:53 +0000 (11:48 +0100)]
bitbake: parse/ast: Optimise data finalisation
The optimisation where only the data we're interested in was finalised
was good but it turns out we can do better. In the case where a
class-extension is to be targeted, we can skip the other targets.
This change does that and speeds up parsing at the bitbake-worker
execution time. Specifically, you can see an improvement in the speed
of bitbake X -n.
(Bitbake rev:
b56918c7ef7913e84356c69ee9b269844a446728)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sun, 13 Apr 2014 10:45:58 +0000 (11:45 +0100)]
bitbake: runqueue: Do not write out stamp files in dry_run mode
In dry run mode, stamps for noexec tasks are being written out which
is incorrect. Avoid this.
(Bitbake rev:
aa6448a0552ba2947ac262b8b5314a593d1058d3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sun, 13 Apr 2014 10:45:03 +0000 (11:45 +0100)]
bitbake: runqueue: Fix task weighting algorithm
When looking at a list of tasks, do_patch and do_unpack were being
given equal priority when one clearly depends on another. The
reason for this was the default task weights of 0 being to tasks.
This is therefore changed to 1 to allow correct weighting of dependencies
which means the scheduler has better information available to it about
tasks.
Weight endpoints differently (10) for clearer debugging of priorities.
(Bitbake rev:
12dc1d17fac3e8ec420fcafb06186d32fd847d89)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sun, 13 Apr 2014 10:44:25 +0000 (11:44 +0100)]
bitbake: runqueue: Fix handling of zero priority task
The zero priority task should be run first but was being confused with
the None value the priority field defaulted to. Check for None
explicitly to avoid this error.
In the real world this doesn't change much but it confused the debug
output from the schedulers.
(Bitbake rev:
49c9d8c9400f74c804c2f36462639236e0841ff0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Belen Barros Pena [Fri, 11 Apr 2014 16:32:31 +0000 (17:32 +0100)]
bitbake: bitbake: toaster: Fix Empty tasks filter
Somehow the counter was set to count tasks with outcome
'not available', instead of outcome 'empty'. This patch
fixes the problem.
[YOCTO #6146]
(Bitbake rev:
1cc2a299c842185ba14074817d5cd2925275610b)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Belen Barros Pena [Fri, 11 Apr 2014 16:32:30 +0000 (17:32 +0100)]
bitbake: bitbake: toaster: Fix total number of tasks in build dashboard
The total number of tasks in the build dashboard was counting
_setscene tasks, which are not exposed by Toaster as separate
tasks. This patch makes sure that _setscene tasks are not
counted when calculating that number.
[YOCTO #6145]
(Bitbake rev:
f8817c060042147a173d3451121304b25ffc4b6c)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cristiana Voicu [Fri, 18 Apr 2014 06:40:36 +0000 (09:40 +0300)]
kmod: upgrade to v17 via git
Just one patch has some small changes because the new code
has another fix for unaligned access.
(From OE-Core rev:
1d82fb4f1980bbe3c9cf0fffb45702bddda73307)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cristiana Voicu [Fri, 18 Apr 2014 06:40:35 +0000 (09:40 +0300)]
mtd-utils: upgrade to 1.5.1+gitAUTOINC+12158de
(From OE-Core rev:
d2a7665ac5615482d1d212410064a7d23dd196de)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cristiana Voicu [Fri, 18 Apr 2014 06:40:34 +0000 (09:40 +0300)]
at-spi2-core: upgrade to 2.12.0
(From OE-Core rev:
c27b4b47b1d69965ce3da7560f57c972cbf8085d)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cristiana Voicu [Fri, 18 Apr 2014 06:40:33 +0000 (09:40 +0300)]
at-spi2-atk: upgrade to 2.12.0
(From OE-Core rev:
982443d0d9373aba3d86a977c16a8780425b736e)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cristiana Voicu [Fri, 18 Apr 2014 06:40:32 +0000 (09:40 +0300)]
atk: upgrade to 2.12.0
(From OE-Core rev:
95d85136a4ab62ce60e915755a1252e5472108cc)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cristiana Voicu [Fri, 18 Apr 2014 06:40:31 +0000 (09:40 +0300)]
curl: upgrade to 7.36.0
(From OE-Core rev:
a4b5173dcba0384589debceebf90e98a2cbadd63)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cristiana Voicu [Fri, 18 Apr 2014 06:40:30 +0000 (09:40 +0300)]
pango: upgrade to 1.36.3
(From OE-Core rev:
e61afbdf0227b8905092571c84ffd6fdeccc34be)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Thu, 20 Mar 2014 02:19:06 +0000 (10:19 +0800)]
mklibs-native: upgrade from 0.1.38 to 0.1.39
* Fix the HOMEPAGE
* Fix the SRC_URI, .tar.gz has gone, only .tar.xz now.
(From OE-Core rev:
f441f0693670da976ca38fa85717878f6958a359)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Thu, 20 Mar 2014 02:19:05 +0000 (10:19 +0800)]
automake: upgrade from 1.14 to 1.14.1
(From OE-Core rev:
07c158691f298b1a561a73c40480176625f309d9)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Thu, 20 Mar 2014 02:19:04 +0000 (10:19 +0800)]
wget: upgrade from 1.14 to 1.15
* Removed:
- fix_doc.patch (backport)
* Add the HOMEPAGE.
(From OE-Core rev:
c5ed2e443d8f3d6c31a3fa99cddc20b8f89f7d0e)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Thu, 20 Mar 2014 02:19:03 +0000 (10:19 +0800)]
file: upgrade from 5.16 to 5.17
(From OE-Core rev:
cf1a4a8b1a0ece2f75fab9d79c69ce2726ef78b9)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Chunrong Guo [Mon, 14 Apr 2014 06:13:43 +0000 (14:13 +0800)]
lttng-modules: update to 2.4.1 version
*This updates lttng-modules for 2.4.1 and
it also fixes the build with 3.13 Linux kernel.
(From OE-Core rev:
023c2401677f9af6895887d6e8bca2fd1d730985)
Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Philip Tricca [Wed, 16 Apr 2014 01:16:48 +0000 (01:16 +0000)]
grub-efi: Use a variable to specify built-in grub modules.
The previous behavior defines a static set of modules that are built
into the grub efi executable. This works fine for a limited set of boot
environments namely the standard linux/initrd. This patch conditionally
assigns the same modules to a variable. This allows other meta layers
to add additional modules or completely override the defaults. The use
case driving this patch is the use of multiboot2 and related modules.
(From OE-Core rev:
597f8e0040ba3135220000b23767858c64b5c9b8)
Signed-off-by: Philip Tricca <flihp@twobit.us>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Matthieu Crapet [Mon, 14 Apr 2014 13:56:05 +0000 (15:56 +0200)]
openssh-sshd: host contamination fix
If you do a readelf -x .rodata /path/.../to/openssh/6.5p1-r0/packages-split/openssh-sshd/usr/sbin/sshd
You'll see two references to OE's sysroots/${BUILD_SYS} login and passwd binaries.
First one can be overridden with LOGIN_PROGRAM environment variable (see configure.ac),
second needs a cached variable definition.
(From OE-Core rev:
2127c80d0cc2a3a4d676bd3c0890454a175fba8e)
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Koen Kooi [Mon, 14 Apr 2014 08:03:37 +0000 (10:03 +0200)]
grub git: workaround debugedit problems
Debugedit errors out on bare metal binaries. The first version of this patch limited it to 64 bit targets, but the problem now shows up on 32 bit targets (minnowboard) as well.
(From OE-Core rev:
f95c7611007ddda3fe36db90168c7d5de096f9cd)
Signed-off-by: Koen Kooi <koen.kooi@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andreas Müller [Thu, 17 Apr 2014 08:13:26 +0000 (10:13 +0200)]
make menuconfig work for recent xfce environment
xfce terminal was renamed 'Terminal' -> 'xfce4-teminal' mainline end of 2012,
so the distros supporting 'Terminal' will dissapear. The distros not
mentionied in __init__ do (e.g fedora 19 - tested) fail - or will fail
sooner or later.
(From OE-Core rev:
d07f3812ec371da6f18fa1dd920cdde470bd89ad)
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Sat, 12 Apr 2014 04:10:11 +0000 (00:10 -0400)]
linux-yocto/3.14: aufs, edgerouter config and -rt
Updating the 3.14 SRCREVs to import the following changes:
- enable AUFS: a missing Kbuild patch was preventing aufs from compiling
- edgerouter: remove RTC configuration options
- preempt-rt recipe. The patch for 3.14 is availble, so we populate the recipe.
(From OE-Core rev:
8e38a24a9d9cd44733a25d3de307907a788d643d)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andreas Oberritter [Fri, 11 Apr 2014 18:56:13 +0000 (20:56 +0200)]
recipe_sanity.bbclass: avoid error when running 'bitbake -e'
Running 'bitbake -e' without further arguments causes a stack trace on stderr:
| ERROR: Command execution failed: Traceback (most recent call last):
| File "[...]/bitbake/lib/bb/command.py", line 99, in runAsyncCommand
| commandmethod(self.cmds_async, self, options)
| File "[...]/bitbake/lib/bb/command.py", line 405, in showEnvironment
| command.cooker.showEnvironment(bfile)
| File "[...]/bitbake/lib/bb/cooker.py", line 453, in showEnvironment
| logger.plain("\npython %s () {\n%s}\n", e, data.getVar(e, envdata, 1))
| File "[...]/bitbake/lib/bb/data.py", line 89, in getVar
| return d.getVar(var, exp)
| File "[...]/bitbake/lib/bb/data_smart.py", line 522, in getVar
| return self.getVarFlag(var, "_content", expand, noweakdefault)
| File "[...]/bitbake/lib/bb/data_smart.py", line 612, in getVarFlag
| value = self.expand(value, cachename)
| File "[...]/bitbake/lib/bb/data_smart.py", line 350, in expand
| return self.expandWithRefs(s, varname).value
| File "[...]/bitbake/lib/bb/data_smart.py", line 340, in expandWithRefs
| raise ExpansionError(varname, s, exc)
| ExpansionError: Failure expanding variable can_delete_FILESPATH, expression was def can_delete_FILESPATH(cfgdata, d):
| expected = cfgdata.get("FILESPATH")
| #expected = "${@':'.join([os.path.normpath(os.path.join(fp, p, o)) for fp in d.getVar('FILESPATHBASE', True).split(':') for p in d.getVar('FILESPATHPKG', True).split(':') for o in (d.getVar('OVERRIDES', True) + ':').split(':') if os.path.exists(os.path.join(fp, p, o))])}:${FILESDIR}"
| expectedpaths = d.expand(expected)
| unexpanded = d.getVar("FILESPATH", 0)
| filespath = d.getVar("FILESPATH", True).split(":")
| filespath = [os.path.normpath(f) for f in filespath if os.path.exists(f)]
| for fp in filespath:
| if not fp in expectedpaths:
| # __note("Path %s in FILESPATH not in the expected paths %s" %
| # (fp, expectedpaths), d)
| return False
| return expected != unexpanded
| which triggered exception AttributeError: 'NoneType' object has no attribute 'split'
Removing the commented second line in can_delete_FILESPATH() hides the error.
(From OE-Core rev:
a84c36e0e5e8332ddc5a6c34e1f598d5cb87cee2)
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Stefan Stanacar [Fri, 11 Apr 2014 17:49:14 +0000 (20:49 +0300)]
scripts/send-error-report: simple hack to use proxy from the enviroment
People behind a proxy couldn't send an error report to an upstream server,
this should fix the issue if they use a proxy that doesn't require authentication,
or one that uses basic http authentication and it's correctly exported in the enviroment.
(From OE-Core rev:
a8511ee80246b4e2caa353b87f4b586f1539e6d4)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Fri, 11 Apr 2014 15:07:39 +0000 (17:07 +0200)]
icecc: don't create unnecessary 'ice' dirs in sysroots when disabled
* parsing ICE_PATH="${@icc_path(bb, d)}" causes "ice" directories
to be created in every sysroot, that could be a bit confusing for
people who inherit icecc.bbclass, but disabled it
* shorten ICECC_VERSION="${@icc_version(bb, d)}" path a bit
by returning sooner when disabled
* remove ICECC_PATH and ICECC_ENV_EXEC from signatures, we assume that
using icecc doesn't influence the output, so it shouldn't matter when
user supplies own version of icecc or env script
* always compare ICECC_DISABLED with "1", boolean typed_value isn't used
because documentation already mentions using empty value to keep icecc
enabled and that's not valid boolean value when oe.data.typed_value is
used:
ERROR: ICECC_DISABLED: Invalid boolean value ''
(From OE-Core rev:
c3e8bfe30685e2357a6eb3ba8f4a014c7dc9f58e)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andreas Müller [Thu, 10 Apr 2014 18:07:48 +0000 (20:07 +0200)]
shadow: fix building systemd with useradd-staticids.bbclass enabled
| groupadd: 'systemd-journal-gateway' is not a valid group name
Without useradd-staticids enabled, group 'systemd-journal-gateway' is created
by useradd and that seems not to care for GROUP_NAME_MAX_LENGTH which has 16 by
default.
(From OE-Core rev:
33c7892326de296cc6d143577be5b395ac887d91)
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Stefan Stanacar [Fri, 11 Apr 2014 11:04:49 +0000 (14:04 +0300)]
selftest: DiskMonTest: use a high value for free space
Using the free space of the host works when
oe-selftest is the only build running, but if something else
on the host remove things this will fail (as seen on AB).
Using an absurdly high value should fix this.
(From OE-Core rev:
413fc934fadbd3603b7f78dfd3cc0ac83bb0377f)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Sat, 19 Apr 2014 09:59:28 +0000 (02:59 -0700)]
libav: Add libsdl to DEPENDS only when x11 is enabled
When we have opengl in distro features but not x11 and try to
build libav then it calls out to build libsdl which inturn has depependency on libglu
and libglu fails to build
ld: error: cannot find -lGL
| collect2: error: ld returned 1 exit status
| make: *** [libGLU.la] Error 1
| ERROR: oe_runmake failed
since libglu wants glx enabled in mesa and glx in mesa is (righly) enabled only when x11
is in distro features.
This breaks the dependency chain leading to this problem
(From OE-Core rev:
fe9fe5ca5039743fc80d14f0518b95929c458b1a)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Fri, 18 Apr 2014 20:01:18 +0000 (22:01 +0200)]
libnotify: add dbus-glib dependency
* | No package 'dbus-glib-1' found
| configure:11865: error: Package requirements (gtk+-2.0 >= 2.18, glib-2.0 >= 2.6,
dbus-1 >= 0.76, dbus-glib-1 >= 0.76 gmodule-2.0) were not met:
* introduced in:
commit
5c1eeb5d16566521e45947b07fdcd9f552fec45b
Author: Alexandru Palalau <alexandrux.palalau@intel.com>
Date: Thu Feb 27 12:05:41 2014 +0200
libnotify: don't use gnome.bbclass
because gnome.bbclass was adding gconf->dbus-glib dependency
* it was also causing other recipes to fail when they were depending
on libnotify which has dbus-glib in pkg-config and dbus-glib was
missing, e.g. firefox:
| checking for libnotify >= 0.4... Package dbus-glib-1 was not found
in the pkg-config search path. Perhaps you should add the directory
containing `dbus-glib-1.pc' to the PKG_CONFIG_PATH environment
variable Package 'dbus-glib-1', required by 'libnotify', not found
| configure: error: Library requirements (libnotify >= 0.4) not met;
consider adjusting the PKG_CONFIG_PATH environment variable if your
libraries are in a nonstandard prefix so pkg-config can find them.
(From OE-Core rev:
abb2571a6352fc33a8b78ab0886d443894cda3b6)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hongxu Jia [Fri, 11 Apr 2014 10:31:38 +0000 (18:31 +0800)]
apr: remove the use of ${SHELL} to avoid bash/dash confliction
While multible hosts sharing a common sstate cache, the fist host using
bash as default shell and build apr, the second host using dash as
default shell and build apr-util, there was a failure in apr-util:
...
| /bin/sh: 0: Can't open i586-poky-linux-libtool
| make[1]: *** [dbm/apr_dbm_gdbm.lo] Error 127
| make[1]: *** Waiting for unfinished jobs....
| make[1]: Leaving directory
`tmp/work/i586-poky-linux/apr-util/1.5.2-r0/apr-util-1.5.2'
...
The quick way to reproduce the defect in Ubuntu 1204:
1. Create a new build
2. sudo dpkg-reconfigure dash <set bash as /bin/sh>
3. bitbake apr
4. sudo dpkg-reconfigure dash <set dash as /bin/sh>
5. bitbake apr-util
Remove the use of $(SHELL) in the apr could avoid this issue.
(From OE-Core rev:
53af71200b6f6d117e1e7dc2e7a7d21c6faab8f9)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 22 Apr 2014 21:53:34 +0000 (22:53 +0100)]
build-appliance-image: Update to head revision
(From OE-Core rev:
bec37f8b85b6dd1e4e1c1b9b215a7952ca2fc386)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark [Thu, 17 Apr 2014 18:57:51 +0000 (11:57 -0700)]
bitbake: bitbake-user-manual-hello.xml: Edits to the "Hello World" Appendix.
Fixes [YOCTO #1973]
These are review changes applied from Paul Eggleton.
(Bitbake rev:
431181705f1bc3fc51439faa04a193debc1d03fd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark [Tue, 15 Apr 2014 21:06:21 +0000 (14:06 -0700)]
bitbake: bitbake-user-manual-hello.xml: First draft of "Hello World" appendix
Fixes [YOCTO #1973]
Added the complete "Hello World" appendix first draft beyond
what Bill Traynor had supplied.
(Bitbake rev:
176baaf3d0f033091f5ab9d9cfb2cec3d25a5442)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark [Tue, 15 Apr 2014 13:53:29 +0000 (06:53 -0700)]
bitbake: bitbake-user-manual-hello.xml: Edits to environment for hello world.
Some general edits to the sections that get you set up to run
the "Hello World" example.
(Bitbake rev:
43286d31c22e6e2fa96ba1b82445e85db0a0f18c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark [Tue, 15 Apr 2014 00:56:23 +0000 (17:56 -0700)]
bitbake: bitbake-user-manual-metadata.xml: Added section on pathname syntax
Added a brief subsection to the "Basic Syntax" section that
describes the issue using the tilde character (~) when providing
a pathname as part of a statement. BitBake does not expand
this character like the shell does. We recommend to not use
it in pathnames.
(Bitbake rev:
8e4c5cee932c3f38d4147c59612d76ca0b002727)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark [Tue, 15 Apr 2014 00:10:03 +0000 (17:10 -0700)]
bitbake: bitbake-user-manual-ref-variables.xml: Edits to the BBPATH variable.
I took the stuff about running bitbake outside the build
directory and removed the note syntax.
(Bitbake rev:
783f29a593ce16a37b275b02f71b3ec918ef8c91)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark [Mon, 14 Apr 2014 22:31:14 +0000 (15:31 -0700)]
bitbake: bitbake-user-manual-ref-variables.xml: Fixed BBPATH example
The example used in the note in the BBPATH variable description
had incorrect syntax. Spaces existed in the BBPATH = statement.
I have removed them.
(Bitbake rev:
896a1c102a4afda0e5d07d009bd7918044f88269)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark [Mon, 14 Apr 2014 20:05:48 +0000 (13:05 -0700)]
bitbake: user-manual-hello.xml: General edits
I worked through the chapter and made some minor edits based
on my user experience. Part of what I did was to update
the console output for the examples.
(Bitbake rev:
13bf6cf71ff49572c3413435a33d87e5b6a8df0d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark [Mon, 14 Apr 2014 18:00:42 +0000 (11:00 -0700)]
bitbake: bitbake-user-manual-hello.xml: Fixed two broken links.
(Bitbake rev:
7a0948beba2c882de31ec9b98c7740bba230aed9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark [Mon, 14 Apr 2014 16:34:39 +0000 (09:34 -0700)]
bitbake: bitbake-user-manual-metadata.xml: New section on anonymous Python functions
Per Paul Eggleton's suggestion, I added a new section on
anonymous Python functions into the "Functions" section.
I also updated the intro text to account for the added
type of functions.
(Bitbake rev:
983d03c1a082e2b83187f0788e61a7941670b242)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark [Fri, 11 Apr 2014 18:47:57 +0000 (11:47 -0700)]
bitbake: bitbake-user-manual-metadata.xml: Edits to flexible inheritance section.
Fixes [YOCTO #5472]
Applied review edits from Paul Eggleton to this section.
Minor edits and some re-writing.
(Bitbake rev:
7259d9d40aad8254751f7674653cd362a9023054)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 11 Apr 2014 16:38:18 +0000 (17:38 +0100)]
bitbake: doc: Rename user-manual -> bitbake-user-manual
This manual gets combined with other manuals and in that context, it helps
a lot if its seen as the Bitbake User Manual. Renames are a pain but
this is worthwhile so that other docs can correctly be combined with this
one. This also clarifies things like google search results which is helpful.
(Bitbake rev:
452a62ae0c2793e281d6769fd3e45500a74898d6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Stefan Stanacar [Thu, 17 Apr 2014 10:35:04 +0000 (13:35 +0300)]
scripts/send-error-report: use a real server as the default
Now that there is a public instance [1] of the error report web interface [2],
we should set it as the default.
[1] http://errors.yoctoproject.org/
[2] http://git.yoctoproject.org/cgit/cgit.cgi/error-report-web/
(From OE-Core rev:
90a955761db4724f0222527a129a3904d6d8aa6e)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Alexandru DAMIAN [Fri, 11 Apr 2014 16:40:32 +0000 (17:40 +0100)]
toaster.bbclass: do not fail on non-existent files
Toaster may look up inexistent file paths in the build history
for packages that have been referenced but not built.
This triggers a failure, and this patch recovers by deleting
the reference to the non-built packages.
[YOCTO #6063]
(From OE-Core rev:
6bc4a0311cc3cd3f696d9dbca8fc0ef4e3bc340b)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Denys Dmytriyenko [Thu, 17 Apr 2014 19:05:33 +0000 (15:05 -0400)]
u-boot: fix beaglebone boot issue with large kernel images
Fix beaglebone boot issue with large kernel images overwriting Device Tree.
See very detailed comments inside the patch.
The original patch is being reviewed upstream and is targeting mainline U-boot
version 2014.07. This is the adaptation of the patch for 2013.07 version we use
(From OE-Core rev:
cd495307d233b81ebeb43198d13bbd4b3ad7407f)
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 10 Apr 2014 16:47:51 +0000 (17:47 +0100)]
bitbake: bitbake: Update to version 1.23.0 for master
(Bitbake rev:
bb4980c63db386ce7d30d9a6b86e9f3861b3bc3a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 10 Apr 2014 16:47:22 +0000 (17:47 +0100)]
bitbake: bitbake: Update to version 1.22.0
(Bitbake rev:
a8a32de0fb74ff63e5490e3b5e4419146a8f7367)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Thu, 10 Apr 2014 16:35:40 +0000 (17:35 +0100)]
bitbake: cache: don't trigger reparse on recipes with wildcards in SRC_URI
Since we now get wildcards in the file checksum list in the cache, we
need to ignore them when checking to see if they still exist. This
fixes connman-gnome reparsing on every bitbake execution in OE-Core.
(Bitbake rev:
340c250fc664414ab2715a454bedbd19e8efe103)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Thu, 10 Apr 2014 14:49:47 +0000 (14:49 +0000)]
linux-yocto/3.10: intel BSP configuration updates
Updating the SRCREV for the following configuration changes:
7df9ef8ee47d minnow: Add minnow-drivers-extra fragment
4f12b62002ca meta: smp.scc: increase default NR_CPUS to 64
de70ccd19f86 intel-common: change intel-corei7064-preempt-rt-scc filename
e3780cd93809 meta: mohonpeak: remove branch 'mohonpeak'
(From OE-Core rev:
20625df0f88b1948bfc05be0d2cbdaa201c3b2f0)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Thu, 10 Apr 2014 14:46:20 +0000 (14:46 +0000)]
linux-yocto/3.14: beagleboard black: USB, DRM config tweaks
Importing the meta SRCREV to pick up the following two fixes:
928d7b2ddad0 beaglebone: enhance USB support and enable MUSB modules
fbe38387ac61 beaglebone: enable DRM for HDMI output
(From OE-Core rev:
c95ae50dc0817fee291ca981c41cb556bf7db582)
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Wed, 2 Apr 2014 14:37:01 +0000 (14:37 +0000)]
linux-yocto/3.14: intel configuration fixes
Importing the intel configuration fixes from Darren Hart:
a82ccc635e7a meta: Purge retired BSPs chiefriver, sys940x, and atom-pc
b50ba1e37c26 x86: Drop X86_32 configs
8aa0a946f528 x86: Move MTRR config into x86 common fragments
ddae217aefee common-pc: Remove SMP from common-pc*-cpu fragments
f3ad83aa4c39 x86: Consolidate common x86* CPU features
(From OE-Core rev:
399d3d51f35fd8782367e82c7b6e641f32396f80)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Wed, 2 Apr 2014 14:33:34 +0000 (14:33 +0000)]
linux-yocto/3.10: intel-common: Add preempt-rt ktype targets
Updating the meta SRCREV to incorporate the intel common preempt-rt kernel
support.
(From OE-Core rev:
63de385a2dce1727d6d4b42dfdf8cb38d8ae5792)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Wed, 2 Apr 2014 04:38:53 +0000 (04:38 +0000)]
linux-yocto/3.10: v3.10.35 and emenlow boot fixes
Updating the 3.10 SRCREVs to pick up 3.10.35 and a LTSI cherry pick that
fixes a boot issue with the emenlow.
(From OE-Core rev:
f0990363aaeb3f8f7a8e02fc2acb0af2171e4eba)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Thu, 10 Apr 2014 15:12:32 +0000 (11:12 -0400)]
linux-yocto/3.4: update to v3.4.85
Updating the SRCREVs to integrate the latest korg -stable update.
(From OE-Core rev:
c6fe4b287c204d31a9ab86e3f38336d8828903ee)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 10 Apr 2014 12:49:55 +0000 (13:49 +0100)]
sstate: Silence warnings when switching machines
We recently added multiple provider warnings. These could get issued
from -cross recipes due to the way these currently overlap in the
native sysroot. Filter out these warnings for now, until such times
as we improve the cross recipes so they don't have an overlapping
namespace.
(From OE-Core rev:
d62f8d428831cc62b395f4c764c1e876353ddede)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Alexandru Palalau [Thu, 10 Apr 2014 10:59:00 +0000 (13:59 +0300)]
selftest: DiskMonTest: use POSIX output for df
Without "-P" df splits the output on multiple lines and breaks the test
(From OE-Core rev:
81a81807d34e4b2ea28d8ba9c29e5b48a14bbc1f)
Signed-off-by: Alexandru Palalau <alexandrux.palalau@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 10 Apr 2014 10:09:01 +0000 (10:09 +0000)]
gcc: Fix a race over unwind.h
There are two places unwind.h is installed, even by the Makefile's admission.
Disable one of them to prevent build failure races.
(From OE-Core rev:
d3b02218dcfedda8e4efb43b8fa6d13af8d91f78)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Joe Slater [Wed, 9 Apr 2014 18:55:29 +0000 (11:55 -0700)]
vala: inherit pkgconfig
Although somebody we depend on might cause pkgconfig-native
to be built, we should not rely on that.
(From OE-Core rev:
ed4b26cf312360e0eb1b0fbec5b039b939d9823f)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 10 Apr 2014 09:05:50 +0000 (10:05 +0100)]
perf: Fix sysroot option to CC handling
If you build perf in tree /xxx/treea, then cleansstate perf and build it
in /xxx/treeb having deleted treea, the build will fail, unable to find libc.
The problem is that the --sysroot option passed in through CC is missing.
This works fine if the default sysroot is ok, if it isn't, things will fail.
In 1.7 we'll start poisoning the default sysroot in gcc to catch this kind of
issue however that doesn't fix the problem with perf.
The problem is that various Makefiles set CC = $(CROSS_COMPILE)gcc. The
easist fix for now is to sed out the problematic Makefile lines. Its worth
noting the tools/lib/traceevent Makefile has a much more funky way of setting
CC which works for us and may be the way we need to fix the other Makefiles
upstream.
This fixes build failures we're occasionally seen on the autobuilders.
(From OE-Core rev:
d9bd1ac6d91de932dd3e2fcac9da77e0a7c09f55)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Chong Lu [Thu, 10 Apr 2014 08:25:03 +0000 (16:25 +0800)]
kernelshark/trace-cmd: fix syntax error of shell
Delete "<<<" syntax of bash in Makefile, else we would get following error:
Syntax error: redirection unexpected
[YOCTO #6112]
(From OE-Core rev:
c2892fa27d9918aa4ce00a106a254ddfd44aa0f1)
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>