media: rkisp1: Save info pointer in rkisp1_device

To make it possible to use the rkisp1_info after probe time (for
instance to make code conditional on the ISP version), save it in the
main rkisp1_device structure. To achieve this, also move the info
structure into the common header, and document it.

While at it, drop a NULL check in rkisp1_probe() for the match data as
it can't happen.

Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: rkisp1: Rename rkisp1_match_data to rkisp1_info

The rkisp1_match_data structure contains device model-specific
information. It it referenced from OF match data, but that's an
implementation detail. Rename it to rkisp1_info to reflect its main
purpose.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: rkisp1: Read the ID register at probe time instead of streamon

There's no need to read the ID register every time streaming is started.
Do it once, at probe time.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: rkisp1: Disable runtime PM in probe error path

If the v4l2_device_register() call fails, runtime PM is left enabled.
Fix it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: rkisp1: Enable compilation on ARCH_MXC

The ISP used by the Rockchip RK3399 is also found in the NXP i.MX8MP.
Enable compilation of the driver for the MXC architecture in addition to
ARCH_ROCKCHIP.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: mc-entity: Add a new helper function to get a remote pad for a pad

The newly added media_entity_remote_source_pad_unique() helper function
handles use cases where the entity has a link enabled uniqueness
constraint covering all pads. There are use cases where the constraint
covers a specific pad only. Add a new media_pad_remote_pad_unique()
function to handle this. It operates as
media_entity_remote_source_pad_unique(), but on a given pad instead of
on the entity.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: mc-entity: Add a new helper function to get a remote pad

The media_entity_remote_pad_first() helper function returns the first
remote pad it finds connected to a given pad. Beside being possibly
non-deterministic (as it stops at the first enabled link), the fact that
it returns the first match makes it unsuitable for drivers that need to
guarantee that a single link is enabled, for instance when an entity can
process data from one of multiple sources at a time.

For those use cases, add a new helper function,
media_entity_remote_pad_unique(), that operates on an entity and returns
a remote pad, with a guarantee that only one link is enabled. To ease
its use in drivers, also add an inline wrapper that locates source pads
specifically. A wrapper that locates sink pads can easily be added when
needed.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: mc-entity: Rename media_entity_remote_pad() to media_pad_remote_pad_first()

The media_entity_remote_pad() is misnamed, as it operates on a pad and
not an entity. Rename it to media_pad_remote_pad_first() to clarify its
behaviour.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: v4l2-async: Add notifier operation to destroy asd instances

Drivers typically extend the v4l2_async_subdev structure by embedding it
in a driver-specific structure, to store per-subdev custom data. The
v4l2_async_subdev instances are freed by the v4l2-async framework, which
makes this mechanism cumbersome to use safely when custom data needs
special treatment to be destroyed (such as freeing additional memory, or
releasing references to kernel objects).

To ease this, add a .destroy() operation to the
v4l2_async_notifier_operations structure. The operation is called right
before the v4l2_async_subdev is freed, giving drivers a chance to
destroy data if needed.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: rkvdec: Use vb2_find_buffer

Use the newly introduced vb2_find_buffer API to get a vb2_buffer
given a buffer timestamp.

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: hantro: Use vb2_find_buffer

Use the newly introduced vb2_find_buffer API to get a vb2_buffer
given a buffer timestamp.

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: vicodec: Use vb2_find_buffer

Use the newly introduced vb2_find_buffer API to get a vb2_buffer
given a buffer timestamp.

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: tegra-vde: Use vb2_find_buffer

Use the newly introduced vb2_find_buffer API to get a vb2_buffer
given a buffer timestamp.

Cc: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: mediatek: vcodec: Use vb2_find_buffer

Use the newly introduced vb2_find_buffer API to get a vb2_buffer
given a buffer timestamp.

Cc: Tiffany Lin <tiffany.lin@mediatek.com>
Cc: Andrew-CT Chen <andrew-ct.chen@mediatek.com>
Cc: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: videobuf2: Introduce vb2_find_buffer()

All users of vb2_find_timestamp() combine it with vb2_get_buffer()
to retrieve a videobuf2 buffer, given a u64 timestamp.

Introduce an API for this use-case. Users will be converted to the new
API as follow-up commits.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: cedrus: h265: Implement support for tiles

Tiles are last remaining unimplemented functionality for HEVC. Implement
it.

[hverkuil: fix checkpatch warning, split long line in two]

Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: cedrus: Add helper for determining number of elements

Now that controls can be dynamic arrays, we need to know how many
elements are in such array. Add a helper for that.

Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: cedrus: h265: Add a couple of error checks

Now that we have infrastructure for reporting errors, let's add two
checks, which will make sure slice can be actually decoded.

Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: cedrus: Add error handling for failed setup

During decoding setup stage for complex codecs like HEVC driver can
detect inconsistent values in controls or some other task, like
allocating memory, can fail.

Currently setup stage has no way of signalling error. Change return type
of setup callback to int and if returned value is not zero, skip
decoding and finish job immediately with error flag.

While currently there is only one place when setup can fail, it's
expected that there will be more such cases in the future, when HEVC
decoding is improved.

Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: cedrus: Improve error messages for controls

Currently error messages when control creation fails are very sparse.
Granted, user should never observe them. However, developer working on
codecs can. In such cases additional information like which control
creation failed and error number are very useful.

Expand error messages with additional info.

Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: cedrus: h265: Fix logic for not low delay flag

Now that we know real purpose of "not low delay" flag, logic for
applying this flag should be fixed too. According to vendor and
reference implementation, low delay is signaled when POC of current
frame is lower than POC of at least one reference of a slice.

Implement mentioned logic and invert it to conform to flag meaning. Also
don't apply flag for I frames. They don't have any reference.

This fixes decoding of 3 reference bitstreams.

Fixes: 86caab29da78 ("media: cedrus: Add HEVC/H.265 decoding support")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: cedrus: h265: Fix flag name

Bit 21 in register 0x24 (slice header info 1) actually represents
negated version of low delay flag. This can be seen in vendor Cedar
library source code. While this flag is not part of the standard, it can
be found in reference HEVC implementation.

Fix macro name and change it to flag.

Fixes: 86caab29da78 ("media: cedrus: Add HEVC/H.265 decoding support")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: hantro: sunxi: Enable 10-bit decoding

Now that infrastructure for 10-bit decoding exists, enable it for
Allwinner H6.

Tested-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: hantro: Store VP9 bit depth in context

Now that we have proper infrastructure for postprocessing 10-bit
formats, store VP9 bit depth in context.

Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Tested-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: hantro: postproc: Properly calculate chroma offset

Currently chroma offset calculation assumes only 1 byte per luma, with
no consideration for stride.

Take necessary information from destination pixel format which makes
calculation completely universal.

Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Tested-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: hantro: postproc: Fix legacy regs configuration

Some postproc legacy registers were set in VP9 code. Move them to
postproc and fix their value.

Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Tested-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: hantro: postproc: Fix buffer size calculation

When allocating aux buffers for postprocessing, it's assumed that base
buffer size is the same as that of output. Coincidentally, that's true
most of the time, but not always. 10-bit source also needs aux buffer
size which is appropriate for 10-bit native format, even if the output
format is 8-bit. Similarly, mv sizes and other extra buffer size also
depends on source width/height, not destination.

Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Tested-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: hantro: Support format filtering by depth

In preparation for supporting 10-bit formats, add mechanism which will
filter formats based on pixel depth.

Hantro G2 supports only one decoding format natively and that is based
on bit depth of current video frame. Additionally, it makes no sense to
upconvert bitness, so filter those out too.

Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Tested-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: Add P010 tiled format

Add P010 tiled format

[rebased, updated pixel format name and added description]

Tested-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: uvcvideo: Remove unneeded goto

The goto statement in uvc_v4l2_try_format can simply be replaced by an
direct return. There is no further user of the label, so remove it.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: uvcvideo: Limit power line control for Acer EasyCamera

The device does not implement the power line control correctly. Add a
corresponding control mapping override.

Bus 001 Device 003: ID 5986:1172 Acer, Inc EasyCamera
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass          239 Miscellaneous Device
  bDeviceSubClass         2
  bDeviceProtocol         1 Interface Association
  bMaxPacketSize0        64
  idVendor           0x5986 Acer, Inc
  idProduct          0x1172
  bcdDevice           56.04
  iManufacturer           3 Bison
  iProduct                1 EasyCamera
  iSerial                 2
  bNumConfigurations      1

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: uvcvideo: Limit power line control for Quanta cameras

Two more cameras do not implement the power line control correctly. Add
a corresponding control mapping override.

Bus 001 Device 003: ID 0408:4034 Quanta Computer, Inc. ACER HD User Facing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.01
  bDeviceClass          239 Miscellaneous Device
  bDeviceSubClass         2
  bDeviceProtocol         1 Interface Association
  bMaxPacketSize0        64
  idVendor           0x0408 Quanta Computer, Inc.
  idProduct          0x4034
  bcdDevice            0.01
  iManufacturer           1 Quanta
  iProduct                2 ACER HD User Facing
  iSerial                 3 01.00.00
  bNumConfigurations      1

Bus 001 Device 003: ID 0408:4030 Quanta Computer, Inc. HD User Facing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.01
  bDeviceClass          239 Miscellaneous Device
  bDeviceSubClass         2
  bDeviceProtocol         1 Interface Association
  bMaxPacketSize0        64
  idVendor           0x0408 Quanta Computer, Inc.
  idProduct          0x4030
  bcdDevice            0.02
  iManufacturer           1 Quanta
  iProduct                2 HD User Facing
  iSerial                 3 01.00.00
  bNumConfigurations      1

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: uvcvideo: Limit power line control for Chicony Easycamera

Another Chicony camera device does not implement the power line control
correctly. Add a corresponding control mapping override.

Bus 001 Device 003: ID 04f2:b5eb Chicony Electronics Co., Ltd EasyCamera
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass          239 Miscellaneous Device
  bDeviceSubClass         2
  bDeviceProtocol         1 Interface Association
  bMaxPacketSize0        64
  idVendor           0x04f2 Chicony Electronics Co., Ltd
  idProduct          0xb5eb
  bcdDevice           90.45
  iManufacturer           3 Chicony Electronics Co.,Ltd.
  iProduct                1 EasyCamera
  iSerial                 2 0001
  bNumConfigurations      1

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: uvcvideo: Limit power line control for Chicony Easycamera

Two different Easycamera devices do not implement the power line control
correctly. Add a corresponding control mapping override.

Bus 001 Device 003: ID 04f2:b6ba Chicony Electronics Co., Ltd EasyCamera
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass          239 Miscellaneous Device
  bDeviceSubClass         2
  bDeviceProtocol         1 Interface Association
  bMaxPacketSize0        64
  idVendor           0x04f2 Chicony Electronics Co., Ltd
  idProduct          0xb6ba
  bcdDevice           10.70
  iManufacturer           3 Chicony Electronics Co.,Ltd.
  iProduct                1 EasyCamera
  iSerial                 2 0001
  bNumConfigurations      1

Bus 001 Device 003: ID 04f2:b746 Chicony Electronics Co., Ltd EasyCamera
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass          239 Miscellaneous Device
  bDeviceSubClass         2
  bDeviceProtocol         1 Interface Association
  bMaxPacketSize0        64
  idVendor           0x04f2 Chicony Electronics Co., Ltd
  idProduct          0xb746
  bcdDevice           97.57
  iManufacturer           3 Chicony Electronics Co.,Ltd.
  iProduct                1 EasyCamera
  iSerial                 2 0001
  bNumConfigurations      1

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: uvcvideo: Limit power line control for Quanta UVC Webcam

The device does not implement the power line control correctly. Add a
corresponding control mapping override.

Bus 001 Device 003: ID 0408:3090 Quanta Computer, Inc. USB2.0 HD UVC WebCam
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass          239 Miscellaneous Device
  bDeviceSubClass         2
  bDeviceProtocol         1 Interface Association
  bMaxPacketSize0        64
  idVendor           0x0408 Quanta Computer, Inc.
  idProduct          0x3090
  bcdDevice            0.04
  iManufacturer           3 Quanta
  iProduct                1 USB2.0 HD UVC WebCam
  iSerial                 2 0x0001
  bNumConfigurations      1

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: uvcvideo: Add support for per-device control mapping overrides

Some devices do not implement all their controls in a way that complies
with the UVC specification. This is for instance the case for several
devices that do not support the disabled mode for the power line
frequency control. Add a mechanism to allow per-device control mapping
overrides to avoid errors when accessing non-compliant controls.

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: uvcvideo: Add missing value for power_line_frequency

UVC 1.5 class defines 4 values for this control on:
4.2.2.3.6 Power Line Frequency Control

Add the missing value when the UVC version is 1.5.

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: uvcvideo: Replace broken URL

The link to the web page that explains continued fractions is broken.
Replace it with a link to the corresponding Wikipedia page.

Reported-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: uvcvideo: Fix comment blocks style

The uvcvideo driver historically uses the

/* Comment
 * style
 */

for multi-line block comments, which is frowned upon. Patches for the
driver are required to use the more standard

/*
 * Comment
 * style
 */

style. This result in inconsistencies. Fix it by converting all
remaining instances of the old style.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: dt-bindings: media: nxp,imx-mipi-csi2: i.MX8MP support

The CSIS CSI-2 receiver in the i.MX8MP seems to be identical to the
version present in the i.MX8MM. Add a device-specific compatible string,
with a fallback to the i.MX8MM compatible.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: imx: imx-mipi-csis: Implement the .get_frame_desc() operation

The CSIS is connected to its sink through an SoC-specific gasket that
needs to be configured. Depending on the platform, the gasket
configuration requires knowing the CSI-2 DT. To provide the needed
information, implement the .get_frame_desc() operation.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: imx: imx-mipi-csis: Add version register

Register at offset 0x00 isn't documented, but the NXP BSP
imx8-mipi-csi2-sam driver defines it as a version register. Tests on
i.MX7D and i.MX8MP have confirmed this, with values matching the version
of the IP core specified in the respective reference manuals.

This commit doesn't make use of the version register at runtime as the
compatible strings are enough to identify the IP core version.
Nonetheless, capturing the information in register definitions that
don't affect the code negatively is useful for future development.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: imx: imx-mipi-csis: Set the subdev fwnode for endpoint matching

Endpoint matching is preferred over device matching with the async
notifier framework. Set the fwnode in the v4l2_subdev for the CSIS to
the endpoint connected to the next device.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: uapi: move HEVC stateless controls out of staging

HEVC uAPI is used by 2 mainline drivers (Hantro, Cedrus)
and at least 2 out-of-tree drivers (rkvdec, RPi).
The uAPI has been reviewed so it is time to make it 'public' by
un-staging it.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: uapi: Change data_bit_offset definition

'F.7.3.6.1 General slice segment header syntax' section of HEVC
specification describes that a slice header always end aligned on
byte boundary, therefore we only need to provide the data offset in bytes.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: uapi: HEVC: fix padding in v4l2 control structures

Fix padding where needed to remove holes

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: hantro: Stop using Hantro dedicated control

The number of bits to skip in the slice header can be computed
in the driver by using sps, pps and decode_params information.
This makes it possible to remove Hantro dedicated control.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: controls: Log HEVC stateless control in .std_log

Simply print the type of the control.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: uapi: Move the HEVC stateless control type out of staging

Move the HEVC stateless controls types out of staging,
and re-number them.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: uapi: Move parsed HEVC pixel format out of staging

Move HEVC pixel format since we are ready to stabilize the uAPI

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: uapi: Add V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSETS control

The number of 'entry point offset' can be very variable.
Instead of using a large static array define a v4l2 dynamic array
of U32 (V4L2_CTRL_TYPE_U32).
The number of entry point offsets is reported by the elems field
and in struct v4l2_ctrl_hevc_slice_params.num_entry_point_offsets
field.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: uapi: HEVC: Define V4L2_CID_STATELESS_HEVC_SLICE_PARAMS as a dynamic array

Make explicit that V4L2_CID_STATELESS_HEVC_SLICE_PARAMS control is
a dynamic array control type.
Some drivers may be able to receive multiple slices in one control
to improve decoding performance.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: uapi: HEVC: Add documentation to uAPI structure

Add kernel-doc documentation for all the HEVC structures.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: uapi: HEVC: Add SEI pic struct flags

The possible values for the field_pic field in the v4l2_hevc_dpb_entry
structure are defined in the table D.2 in HEVC specification section D.3.3.
Add flags and documentation for each of them.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: uapi: HEVC: Change pic_order_cnt definition in v4l2_hevc_dpb_entry

The HEVC specification describes the following:
"PicOrderCntVal is derived as follows:
PicOrderCntVal = PicOrderCntMsb + slice_pic_order_cnt_lsb
The value of PicOrderCntVal shall be in the range of
−2^31 to 2^31 − 1, inclusive."

To match with these definitions change __u16 pic_order_cnt[2]
into __s32 pic_order_cnt_val.
Change v4l2_ctrl_hevc_slice_params->slice_pic_order_cnt to __s32 too.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: uapi: HEVC: Rename HEVC stateless controls with STATELESS prefix

Change HEVC  stateless controls names to V4L2_CID_STATELESS_HEVC instead
of V4L2_CID_MPEG_VIDEO_HEVC be coherent with v4l2 naming convention.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: uapi: HEVC: Add missing fields in HEVC controls

Complete the HEVC controls with missing fields from H.265 specifications.
Even if these fields aren't used by the current mainlined drivers
they will be required for (at least) the rkvdec driver.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: vivid: add dynamic array test control

Add a dynamic array test control to help test support for this
feature.

Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: v4l2-ctrls: add support for dynamically allocated arrays.

Implement support for dynamically allocated arrays.

Most of the changes concern keeping track of the number of elements
of the array and the number of elements allocated for the array and
reallocating memory if needed.

Acked-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: videodev2.h: add V4L2_CTRL_FLAG_DYNAMIC_ARRAY

Add a new flag that indicates that this control is a dynamically sized
array. Also document this flag.

Currently dynamically sized arrays are limited to one dimensional arrays,
but that might change in the future if there is a need for it.

The initial use-case of dynamic arrays are stateless codecs. A frame
can be divided in many slices, so you want to provide an array containing
slice information for each slice. Typically the number of slices is small,
but the standard allow for hundreds or thousands of slices. Dynamic arrays
are a good solution since sizing the array for the worst case would waste
substantial amounts of memory.

Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: venus: set ubwc configuration on specific video hardware

UBWC configuration parameters would vary across video hardware
generations. At the same time, driver is expected to configure these
parameters, without relying on video firmware to use the default
configurations.
Setting the configuration parameters for sc7280.

Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: venus: venus_helper_get_bufreq(): req is never NULL

Fix a smatch error:

drivers/media/platform/qcom/venus/helpers.c: drivers/media/platform/qcom/venus/helpers.c:678 venus_helper_get_bufreq() error: we previously assumed 'req' could be null (see line 674)

After checking how venus_helper_get_bufreq() is called it is clear that
req is never NULL, so just drop the checks.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: ov5693: add ov5693_of_match, dts support

Add ov5693_of_match. Device tree support

Signed-off-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: dt-bindings: ov5693: document YAML binding

Add documentation of device tree in YAML schema for the OV5693
CMOS image sensor from Omnivision

Signed-off-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: ov5693: add support for acpi clock-frequency prop

Add support for ACPI-based platforms that specify the clock frequency by
using the "clock-frequency" property instead of specifying a clock
provider reference

Signed-off-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: ov5693: rename clk into xvclk

Rename clk pdata pointer into xvclk (system clock input).
Same for clk_rate into xvclk_rate. This is more explicit

Signed-off-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: ov5693: add dvdd into ov5693_supply_names array

Add missing "dvdd" (Digital circuit power) entry into ov5693_supply_names
array

Signed-off-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: ov5693: count num_supplies using array_size

Instead of hardcode OV5693_NUM_SUPPLIES in a define is better use
ARRAY_SIZE function to count the number of supplies from
ov5693_supply_names array

Signed-off-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: entity: Use dedicated data link iterator

Where iteration over links for an entity is clearly assuming that
all of those links are data links, use the new iterator to guarantee
that assumption is met.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: entity: Add iterator for entity data links

Iterating over the links for an entity is a somewhat common need
through the media subsystem, but generally the assumption is that
they will all be data links. To meet that assumption add a new macro
that iterates through an entity's links and skips non-data links.

Signed-off-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: mt9p031: Implement crop bounds get selection

Implement V4L2_SEL_TGT_CROP_BOUNDS query in get_selection subdev op
for this sensor. This is required e.g. to bind it to STM32MP15x DCMI.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefan Riedmueller <s.riedmueller@phytec.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: stm32: dcmi: Fix subdev op call with uninitialized state

stm32-dcmi calls its source subdev with v4l2_subdev_call() using a
v4l2_subdev_state constructed on stack. This means that init_cfg is
never called for that state, and a source subdev that depends on the
init_cfg call may break.

A new macro has been added for this particular purpose, which properly
initializes the state, so let's use v4l2_subdev_call_state_try() here.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Marek Vasut <marex@denx.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: subdev: Add v4l2_subdev_call_state_try() macro

Add a helper macro for the situations where a non-MC driver needs to
call a state-operation (operation which takes a subdev state as a
parameter) in try-context in another subdev.

The macro allocates a new subdev state for the called subdev and frees
the state afterwards.

An example use case is a media platform driver testing if a
v4l2_subdev_format would be accepted by a source subdev.

This should not be used in MC drivers.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Marek Vasut <marex@denx.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: ar0521: fix Kconfig: VIDEO_V4L2 -> VIDEO_DEV

VIDEO_V4L2 no longer exists, instead use VIDEO_DEV. Without this change
this driver cannot be selected.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: Replace dependency on VIDEO_V4L2_SUBDEV_API with select

The VIDEO_V4L2_SUBDEV_API Kconfig symbol is mostly selected
automatically, with a a handful of drivers still using it as a
dependency. Fix them to use selection, and drop the symbol title text to
not expose it for manual selection.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: ov7251: add missing disable functions on error in ov7251_set_power_on()

Add the missing gpiod_set_value_cansleep() and clk_disable_unprepare()
before return from ov7251_set_power_on() in the error handling case.

Fixes: 9e1d3012cc10 ("media: i2c: Remove .s_power() from ov7251")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: sunxi: Depend on GENERIC_PHY_MIPI_DPHY

The sun6i-mipi-csi2 and sun6i-a83t-mipi-csi2 drivers depend on the generic
MIPI D-PHY support. Select it. This fixes a linking problem when either of
these drivers is enabled and GENERIC_PHY_MIPI_DPHY is disabled.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: v4l2: Sanitize colorspace values in the framework

Extend the format sanitization code in the framework to handle invalid
values for the colorspace-related fields.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: v4l2: Make colorspace validity checks more future-proof

The helper functions that test validity of colorspace-related fields
use the last value of the corresponding enums. This isn't very
future-proof, as there's a high chance someone adding a new value may
forget to update the helpers. Add new "LAST" entries to the enumerations
to improve this, and keep them private to the kernel.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: vivid: Add support for the new YUVA and YUVX formats

Extend vivid to support the newly added YUVA and YUVX pixel formats
through the TPG.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: v4l2-tpg: Add support for the new YUVA and YUVX formats

Extend the TPG to support generating the newly added YUVA and YUVX pixel
formats.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: v4l: Add packed YUV 4:4:4 YUVA and YUVX pixel formats

The new YUVA and YUVX are permutations of the existing AYUV and XYUV
formats. They are use by the NXP i.MX8 ISI hardware.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: mediatek: vcodec: Make encoder capability fields fit requirements

This partially reverts commit fd9f8050e355d7fd1e126cd207b06c96cde7f783,
and changes things so that the capability string fields of the encoder
conform to their requirements.

The driver name field should contain the actual driver name, not some
otherwise unused string macro from the driver. To make this clear,
copy the name from the driver's name field.

The card name for the video encoder previously held a static platform
name that was fixed to match MT8173. This obviously doesn't make sense
for newer chips. Since commit fd9f8050e355 ("media: mediatek: vcodec:
Change encoder v4l2 capability value"), this field was changed to hold
the driver's name, or "mtk-vcodec-dec". This doesn't make much sense
either, since this still doesn't reflect what chip this is.

Instead, fill in the card name with "MTxxxx video encoder" with the
proper chip number.

Since commit f2d8b6917f3b ("media: v4l: ioctl: Set bus_info in
v4l_querycap()"), the V4L2 core provides a default value for the
bus_info field for platform and PCI devices. This value will match
the default value for media devices added by commit cef699749f37
("media: mc: Set bus_info in media_device_init()"). These defaults
are stable and device-specific.

Drop the custom capability bus_info from the mtk-vcodec encoder
driver, and use the defaults.

As this patch removes the last usage of MTK_VCODEC_DRV_NAME, remove
the macro as well.

Fixes: fd9f8050e355 ("media: mediatek: vcodec: Change encoder v4l2 capability value")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: mediatek: vcodec: Make decoder capability fields fit requirements

This partially reverts commit a8a7a278c56ad3b4ddd4db9a960e0537d032b0b3,
and changes things so that the capability string fields of the decoder
conform to their requirements.

This recent change caused ChromeOS's decoder to no longer function. This
is due to ChromeOS using the driver name field to match the video device
with its accompanying media device. After the change, they no longer
matched.

The driver name field should contain the actual driver name, not some
otherwise unused string macro from the driver. To make this clear,
copy the name from the driver's name field.

The card name for the video decoder previously held a static platform
name that was fixed to match MT8173. This obviously doesn't make sense
for newer chips. Since commit a8a7a278c56a ("media: mediatek: vcodec:
Change decoder v4l2 capability value"), this field was changed to hold
the driver's name, or "mtk-vcodec-dec". This doesn't make much sense
either, since this still doesn't reflect what chip this is.

Instead, fill in the card name with "MTxxxx video decoder" with the
proper chip number.

Since commit f2d8b6917f3b ("media: v4l: ioctl: Set bus_info in
v4l_querycap()"), the V4L2 core provides a default value for the
bus_info field for platform and PCI devices. This value will match
the default value for media devices added by commit cef699749f37
("media: mc: Set bus_info in media_device_init()"). These defaults
are stable and device-specific.

Drop the custom capability bus_info from the mtk-vcodec decoder
driver, and use the defaults. This also fixes the long standing
issue where the media device used for the stateless decoder didn't
have its bus_info set, and would never match its accompanying video
device.

Fixes: a8a7a278c56a ("media: mediatek: vcodec: Change decoder v4l2 capability value")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: lirc: ensure lirc device receives repeats

Pressing a button on a remote control unit will typically lead to
messages being sent several times per second until the button is released.

Some remote control units indicate long key presses by sending
special "repeat" messages, for which the protocol driver calls
rc_repeat(). Other units repeat the same message over and over,
which will be handled by calling rc_keydown().

The function rc_keydown() never set the LIRC "repeat" flag to distinguish
repeated messages that were sent due to a long keypress, and messages
sent due to repeated short keypresses. While a user-space program may
implement special logic to distinguish long keypresses, it is much simpler
to be able to rely on the flag.

Commit de142c32410649e64d44928505ffad2176a96a9e ("media: lirc: implement
reading scancode") would never set the LIRC_SCANCODE_FLAG_REPEAT flag.
Commit b66218fddfd29f315a103db811152ab0c95fb054
("media: lirc: ensure lirc device receives nec repeats") fixed it up for
rc_repeat() but not rc_keydown().

Signed-off-by: Marko Mäkelä <marko.makela@iki.fi>
Co-developed-by: Sean Young <sean@mess.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: ati-remote: remove private err() macro

Drivers should use dev_err()

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: igorplugusb: use correct size pass to igorplugusb_probe()

After 'buf_in' change to pointer, the sizeof() is not correct buffer
size, it should be MAX_PACKET.

Fixes: b3f820b905c9 ("media: igorplugusb: respect DMA coherency")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: vimc: documentation for lens

Add documentation for vimc-lens.
Add a lens into the vimc topology graph.

Signed-off-by: Yunke Cao <yunkec@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: vimc: use data link entities enum to index the ent_config array

Future additions to the ent_config[] could break the association between
the index of the struct vimc_ent_config entries in the ent_config[] array,
and the index defined by the enum proposed in the previous patch. Using
designated initializers solves this by linking the 2 together clearly in
code and prevents the array not reflecting the enum. There is no
functional change intended.

Suggested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Daniel Oakley <daniel.oakley@ideasonboard.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: vimc: enumerate data link entities for clarity

The data_links array was hard to read and understand. By implementing
enumerated vimc data link entities, clarity has been improved when
defining data_links. This therefore should help new programmers to
understand the codebase better. There is no functional change intended.

Suggested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Daniel Oakley <daniel.oakley@ideasonboard.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: vimc: expand the names of vimc entity types

When introducing the lens controller, it became apparent that the vimc
entity type names were hard to understand, e.g. vimc_len_type refers to the
lens. The names of the vimc entity types have been expanded to make the
code easier to understand. There is no functional change intended.

Suggested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Daniel Oakley <daniel.oakley@ideasonboard.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: vimc: add ancillary lens

Add lens to vimc driver and link them with sensors using ancillary links.
Provides an example of ancillary link usage.The lens supports
FOCUS_ABSOLUTE control.

Test example: With default vimc topology
> media-ctl -p
Media controller API version 5.18.0
...
- entity 28: Lens A (0 pad, 0 link)
             type V4L2 subdev subtype Lens flags 0
             device node name /dev/v4l-subdev6
- entity 29: Lens B (0 pad, 0 link)
             type V4L2 subdev subtype Lens flags 0
             device node name /dev/v4l-subdev7
> v4l2-ctl -d /dev/v4l-subdev7 -C focus_absolute
focus_absolute: 0

Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Yunke Cao <yunkec@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: v4l: async: Also match secondary fwnode endpoints

For camera sensor devices the firmware information of which comes from
non-DT (or some ACPI variants), the kernel makes the information visible
to the drivers in a form similar to DT. This takes place through device's
secondary fwnodes, in which case also the secondary fwnode needs to be
heterogenously (endpoint vs. device) matched.

Fixes: 1f391df44607 ("media: v4l2-async: Use endpoints in __v4l2_async_nf_add_fwnode_remote()")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: amphion: only insert the first sequence startcode for vc1l format

For format V4L2_PIX_FMT_VC1_ANNEX_L,
the amphion vpu requires driver to help insert some custom startcode
before sequence and frame.
but only the first sequence startcode is needed,
the extra startcode will cause decoding error.
So after seek, we don't need to insert the sequence startcode.

In other words, for V4L2_PIX_FMT_VC1_ANNEX_L,
the vpu doesn't support dynamic resolution change.

Fixes: 145e936380edb ("media: amphion: implement malone decoder rpc interface")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: amphion: sync buffer status with firmware during abort

1. prevent to allocate buffer to firmware during abort
2. release buffer when clear the slots

Fixes: 6de8d628df6ef ("media: amphion: add v4l2 m2m vpu decoder stateful driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: hantro: Fix RK3399 H.264 format advertising

Commit 1f82f2df523cb ("media: hantro: Enable H.264 on Rockchip VDPU2")
enabled H.264 on some SoCs with VDPU2 cores. This had the side-effect
of exposing H.264 coded format as supported on RK3399.

Fix this and clarify how the codec is explicitly disabled on RK3399 on
this driver.

Fixes: 1f82f2df523cb ("media: hantro: Enable H.264 on Rockchip VDPU2")
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: docs: Remove extraneous \endgroup from P010 table

The \endgroup command at the bottom of a table added in commit
5374d8fb75f3 ("media: Add P010 video format") doesn't have a
corresponding \begingroup command preceding it.

This imbalance causes an build error in "make pdfdocs".

Fix the issue by removing it.

Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Fixes: 5374d8fb75f3 ("media: Add P010 video format")
Cc: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Cc: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: dt-bindings: media: samsung,s5pv210-jpeg: convert to dtschema

Convert the Samsung SoC JPEG codec bindings to DT schema.

The original bindings were quite old and incomplete, so change during
conversion:
1. Add typical (already used) properties like iommus and power domains.
2. Document samsung,exynos4212-jpeg compatible (already used in DTS and
   driver).
3. List clocks per each variant.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: amphion: defer setting last_buffer_dequeued until resolution changes are processed

Don't set last_buffer_dequeued during dynamic resolution change,
otherwise it may be cleared in handling resolution change,
as streamoff may be called in dynamic resolution change.

Normally, this does not happen.
But we encounter a special testcase,
User issue V4L2_DEC_CMD_STOP after enqueue one buffer
that only contains codec config header, but not any frame data.
So VPU report the parsed resolution, then report the eos event.

So driver should notify user to handle resolution change first,
after it's handled, set the last_buffer_dequeued.
then the user can exit decoding normally.

Otherwise the user may be stalled.

Fixes: 6de8d628df6ef ("media: amphion: add v4l2 m2m vpu decoder stateful driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: mediatek: vcodec: Initialize decoder parameters for each instance

The decoder parameters are stored in each instance's context data. This
needs to be initialized per-instance, but a previous fix incorrectly
changed it to only be initialized for the first opened instance. This
resulted in subsequent instances not correctly signaling the requirement
for the Requests API.

Fix this by calling the initializing function outside of the
v4l2_fh_is_singular() conditional block.

Fixes: faddaa735c20 ("media: mediatek: vcodec: Initialize decoder parameters after getting dec_capability")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>