Uwe Kleine-König [Tue, 26 Jan 2021 16:58:31 +0000 (17:58 +0100)]
amba: Fix resource leak for drivers without .remove
[ Upstream commit
de5d7adb89367bbc87b4e5ce7afe7ae9bd86dc12 ]
Consider an amba driver with a .probe but without a .remove callback (e.g.
pl061_gpio_driver). The function amba_probe() is called to bind a device
and so dev_pm_domain_attach() and others are called. As there is no remove
callback amba_remove() isn't called at unbind time however and so calling
dev_pm_domain_detach() is missed and the pm domain keeps active.
To fix this always use the core driver callbacks and handle missing amba
callbacks there. For probe refuse registration as a driver without probe
doesn't make sense.
Fixes:
7cfe249475fd ("ARM: AMBA: Add pclk support to AMBA bus infrastructure")
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210126165835.687514-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Roja Rani Yarubandi [Mon, 21 Dec 2020 12:38:00 +0000 (18:08 +0530)]
i2c: qcom-geni: Store DMA mapping data in geni_i2c_dev struct
[ Upstream commit
357ee8841d0b7bd822f25fc768afbc0c2ab7e47b ]
Store DMA mapping data in geni_i2c_dev struct to enhance DMA mapping
data scope. For example during shutdown callback to unmap DMA mapping,
this stored DMA mapping data can be used to call geni_se_tx_dma_unprep
and geni_se_rx_dma_unprep functions.
Add two helper functions geni_i2c_rx_msg_cleanup and
geni_i2c_tx_msg_cleanup to unwrap the things after rx/tx FIFO/DMA
transfers, so that the same can be used in geni_i2c_stop_xfer()
function during shutdown callback.
Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org>
Reviewed-by: Akash Asthana <akashast@codeaurora.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vladimir Murzin [Thu, 7 Jan 2021 09:47:24 +0000 (10:47 +0100)]
ARM: 9046/1: decompressor: Do not clear SCTLR.nTLSMD for ARMv7+ cores
[ Upstream commit
2acb909750431030b65a0a2a17fd8afcbd813a84 ]
It was observed that decompressor running on hardware implementing ARM v8.2
Load/Store Multiple Atomicity and Ordering Control (LSMAOC), say, as guest,
would stuck just after:
Uncompressing Linux... done, booting the kernel.
The reason is that it clears nTLSMD bit when disabling caches:
nTLSMD, bit [3]
When ARMv8.2-LSMAOC is implemented:
No Trap Load Multiple and Store Multiple to
Device-nGRE/Device-nGnRE/Device-nGnRnE memory.
0b0 All memory accesses by A32 and T32 Load Multiple and Store
Multiple at EL1 or EL0 that are marked at stage 1 as
Device-nGRE/Device-nGnRE/Device-nGnRnE memory are trapped and
generate a stage 1 Alignment fault.
0b1 All memory accesses by A32 and T32 Load Multiple and Store
Multiple at EL1 or EL0 that are marked at stage 1 as
Device-nGRE/Device-nGnRE/Device-nGnRnE memory are not trapped.
This bit is permitted to be cached in a TLB.
This field resets to 1.
Otherwise:
Reserved, RES1
So as effect we start getting traps we are not quite ready for.
Looking into history it seems that mask used for SCTLR clear came from
the similar code for ARMv4, where bit[3] is the enable/disable bit for
the write buffer. That not applicable to ARMv7 and onwards, so retire
that bit from the masks.
Fixes:
7d09e85448dfa78e3e58186c934449aaf6d49b50 ("[ARM] 4393/2: ARMv7: Add uncompressing code for the new CPU Id format")
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Takeshi Saito [Wed, 16 Dec 2020 10:29:31 +0000 (19:29 +0900)]
mmc: renesas_sdhi_internal_dmac: Fix DMA buffer alignment from 8 to 128-bytes
[ Upstream commit
d7aefb2887601cf1fc3f86f55d43b2c9aece5e8f ]
According to the latest datasheet, the internal DMAC buffer alignment
R-Car Gen3 SDHI HW should be 128-bytes. So, fix it.
Signed-off-by: Takeshi Saito <takeshi.saito.xv@renesas.com>
[shimoda: revise commit description, rebase]
Fixes:
2a68ea7896e3 ("mmc: renesas-sdhi: add support for R-Car Gen3 SDHI DMAC")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/1608114572-1892-2-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Thu, 17 Dec 2020 21:09:22 +0000 (22:09 +0100)]
mmc: usdhi6rol0: Fix a resource leak in the error handling path of the probe
[ Upstream commit
6052b3c370fb82dec28bcfff6d7ec0da84ac087a ]
A call to 'ausdhi6_dma_release()' to undo a previous call to
'usdhi6_dma_request()' is missing in the error handling path of the probe
function.
It is already present in the remove function.
Fixes:
75fa9ea6e3c0 ("mmc: add a driver for the Renesas usdhi6rol0 SD/SDIO host controller")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20201217210922.165340-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Thu, 17 Dec 2020 20:42:36 +0000 (21:42 +0100)]
mmc: sdhci-sprd: Fix some resource leaks in the remove function
[ Upstream commit
c9c256a8b0dc09c305c409d6264cc016af2ba38d ]
'sdhci_remove_host()' and 'sdhci_pltfm_free()' should be used in place of
'mmc_remove_host()' and 'mmc_free_host()'.
This avoids some resource leaks, is more in line with the error handling
path of the probe function, and is more consistent with other drivers.
Fixes:
fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Orson Zhai <orson.zhai@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20201217204236.163446-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Wed, 9 Dec 2020 19:42:02 +0000 (20:42 +0100)]
mmc: owl-mmc: Fix a resource leak in an error handling path and in the remove function
[ Upstream commit
5d15cbf63515c6183d2ed7c9dd0586b4db23ffb1 ]
'dma_request_chan()' calls should be balanced by a corresponding
'dma_release_channel()' call.
Add the missing call both in the error handling path of the probe function
and in the remove function.
Fixes:
ff65ffe46d28 ("mmc: Add Actions Semi Owl SoCs SD/MMC driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20201209194202.54099-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pingfan Liu [Thu, 22 Oct 2020 06:51:19 +0000 (14:51 +0800)]
powerpc/time: Enable sched clock for irqtime
[ Upstream commit
b709e32ef570b8b91dfbcb63cffac4324c87799f ]
When CONFIG_IRQ_TIME_ACCOUNTING and CONFIG_VIRT_CPU_ACCOUNTING_GEN, powerpc
does not enable "sched_clock_irqtime" and can not utilize irq time
accounting.
Like x86, powerpc does not use the sched_clock_register() interface. So it
needs an dedicated call to enable_sched_clock_irqtime() to enable irq time
accounting.
Fixes:
518470fe962e ("powerpc: Add HAVE_IRQ_TIME_ACCOUNTING")
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
[mpe: Add fixes tag]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1603349479-26185-1-git-send-email-kernelfans@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe Leroy [Wed, 20 Jan 2021 07:49:13 +0000 (07:49 +0000)]
powerpc/47x: Disable 256k page size
[ Upstream commit
910a0cb6d259736a0c86e795d4c2f42af8d0d775 ]
PPC47x_TLBE_SIZE isn't defined for 256k pages, leading to a build
break if 256k pages is selected.
So change the kconfig so that 256k pages can't be selected for 47x.
Fixes:
e7f75ad01d59 ("powerpc/47x: Base ppc476 support")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Expand change log to mention build break]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2fed79b1154c872194f98bac4422c23918325e61.1611128938.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
Cédric Le Goater [Mon, 4 Jan 2021 14:32:01 +0000 (15:32 +0100)]
KVM: PPC: Make the VMX instruction emulation routines static
[ Upstream commit
9236f57a9e51c72ce426ccd2e53e123de7196a0f ]
These are only used locally. It fixes these W=1 compile errors :
../arch/powerpc/kvm/powerpc.c:1521:5: error: no previous prototype for ‘kvmppc_get_vmx_dword’ [-Werror=missing-prototypes]
1521 | int kvmppc_get_vmx_dword(struct kvm_vcpu *vcpu, int index, u64 *val)
| ^~~~~~~~~~~~~~~~~~~~
../arch/powerpc/kvm/powerpc.c:1539:5: error: no previous prototype for ‘kvmppc_get_vmx_word’ [-Werror=missing-prototypes]
1539 | int kvmppc_get_vmx_word(struct kvm_vcpu *vcpu, int index, u64 *val)
| ^~~~~~~~~~~~~~~~~~~
../arch/powerpc/kvm/powerpc.c:1557:5: error: no previous prototype for ‘kvmppc_get_vmx_hword’ [-Werror=missing-prototypes]
1557 | int kvmppc_get_vmx_hword(struct kvm_vcpu *vcpu, int index, u64 *val)
| ^~~~~~~~~~~~~~~~~~~~
../arch/powerpc/kvm/powerpc.c:1575:5: error: no previous prototype for ‘kvmppc_get_vmx_byte’ [-Werror=missing-prototypes]
1575 | int kvmppc_get_vmx_byte(struct kvm_vcpu *vcpu, int index, u64 *val)
| ^~~~~~~~~~~~~~~~~~~
Fixes:
acc9eb9305fe ("KVM: PPC: Reimplement LOAD_VMX/STORE_VMX instruction mmio emulation with analyse_instr() input")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-19-clg@kaod.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shay Drory [Mon, 25 Jan 2021 12:13:39 +0000 (14:13 +0200)]
IB/umad: Return EPOLLERR in case of when device disassociated
[ Upstream commit
def4cd43f522253645b72c97181399c241b54536 ]
Currently, polling a umad device will always works, even if the device was
disassociated. A disassociated device should immediately return EPOLLERR
from poll(). Otherwise userspace is endlessly hung on poll() with no idea
that the device has been removed from the system.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/r/20210125121339.837518-3-leon@kernel.org
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shay Drory [Mon, 25 Jan 2021 12:13:38 +0000 (14:13 +0200)]
IB/umad: Return EIO in case of when device disassociated
[ Upstream commit
4fc5461823c9cad547a9bdfbf17d13f0da0d6bb5 ]
MAD message received by the user has EINVAL error in all flows
including when the device is disassociated. That makes it impossible
for the applications to treat such flow differently.
Change it to return EIO, so the applications will be able to perform
disassociation recovery.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/r/20210125121339.837518-2-leon@kernel.org
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yong Wu [Thu, 7 Jan 2021 12:29:06 +0000 (20:29 +0800)]
iommu: Switch gather->end to the inclusive end
[ Upstream commit
862c3715de8f3e5350489240c951d697f04bd8c9 ]
Currently gather->end is "unsigned long" which may be overflow in
arch32 in the corner case: 0xfff00000 + 0x100000(iova + size).
Although it doesn't affect the size(end - start), it affects the checking
"gather->end < end"
This patch changes this "end" to the real end address
(end = start + size - 1). Correspondingly, update the length to
"end - start + 1".
Fixes:
a7d20dc19d9e ("iommu: Introduce struct iommu_iotlb_gather for batching TLB flushes")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210107122909.16317-5-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Mon, 25 Jan 2021 08:44:34 +0000 (11:44 +0300)]
scsi: lpfc: Fix ancient double free
[ Upstream commit
0be310979e5e1272d4c5b557642df4da4ce7eba4 ]
The "pmb" pointer is freed at the start of the function and then freed
again in the error handling code.
Link: https://lore.kernel.org/r/YA6E8rO51hE56SVw@mwanda
Fixes:
92d7f7b0cde3 ("[SCSI] lpfc: NPIV: add NPIV support on top of SLI-3")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Josh Poimboeuf [Thu, 21 Jan 2021 21:29:19 +0000 (15:29 -0600)]
objtool: Fix ".cold" section suffix check for newer versions of GCC
[ Upstream commit
34ca59e109bdf69704c33b8eeffaa4c9f71076e5 ]
With my version of GCC 9.3.1 the ".cold" subfunctions no longer have a
numbered suffix, so the trailing period is no longer there.
Presumably this doesn't yet trigger a user-visible bug since most of the
subfunction detection logic is duplicated. I only found it when
testing vmlinux.o validation.
Fixes:
54262aa28301 ("objtool: Fix sibling call detection")
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/ca0b5a57f08a2fbb48538dd915cc253b5edabb40.1611263461.git.jpoimboe@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Josh Poimboeuf [Thu, 21 Jan 2021 21:29:18 +0000 (15:29 -0600)]
objtool: Fix retpoline detection in asm code
[ Upstream commit
1f9a1b74942485a0a29e7c4a9a9f2fe8aea17766 ]
The JMP_NOSPEC macro branches to __x86_retpoline_*() rather than the
__x86_indirect_thunk_*() wrappers used by C code. Detect jumps to
__x86_retpoline_*() as retpoline dynamic jumps.
Presumably this doesn't trigger a user-visible bug. I only found it
when testing vmlinux.o validation.
Fixes:
39b735332cb8 ("objtool: Detect jumps to retpoline thunks")
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/31f5833e2e4f01e3d755889ac77e3661e906c09f.1611263461.git.jpoimboe@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Josh Poimboeuf [Thu, 21 Jan 2021 21:29:17 +0000 (15:29 -0600)]
objtool: Fix error handling for STD/CLD warnings
[ Upstream commit
6f567c9300a5ebd7b18c26dda1c8d6ffbdd0debd ]
Actually return an error (and display a backtrace, if requested) for
directional bit warnings.
Fixes:
2f0f9e9ad7b3 ("objtool: Add Direction Flag validation")
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/dc70f2adbc72f09526f7cab5b6feb8bf7f6c5ad4.1611263461.git.jpoimboe@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Fri, 22 Jan 2021 15:39:40 +0000 (16:39 +0100)]
auxdisplay: ht16k33: Fix refresh rate handling
[ Upstream commit
e89b0a426721a8ca5971bc8d70aa5ea35c020f90 ]
Drop the call to msecs_to_jiffies(), as "HZ / fbdev->refresh_rate" is
already the number of jiffies to wait.
Fixes:
8992da44c6805d53 ("auxdisplay: ht16k33: Driver for LED controller")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andy Shevchenko [Fri, 23 Oct 2020 16:33:02 +0000 (19:33 +0300)]
watchdog: intel-mid_wdt: Postpone IRQ handler registration till SCU is ready
[ Upstream commit
f285c9532b5bd3de7e37a6203318437cab79bd9a ]
When SCU is not ready and CONFIG_DEBUG_SHIRQ=y we got deferred probe followed
by fired test IRQ which immediately makes kernel panic. Fix this by delaying
IRQ handler registration till SCU is ready.
Fixes:
80ae679b8f86 ("watchdog: intel-mid_wdt: Convert to use new SCU IPC API")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pan Bian [Mon, 18 Jan 2021 12:04:55 +0000 (04:04 -0800)]
isofs: release buffer head before return
[ Upstream commit
0a6dc67a6aa45f19bd4ff89b4f468fc50c4b8daa ]
Release the buffer_head before returning error code in
do_isofs_readdir() and isofs_find_entry().
Fixes:
2deb1acc653c ("isofs: fix access to unallocated memory when reading corrupted filesystem")
Link: https://lore.kernel.org/r/20210118120455.118955-1-bianpan2016@163.com
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Fri, 22 Jan 2021 18:32:50 +0000 (19:32 +0100)]
regulator: core: Avoid debugfs: Directory ... already present! error
[ Upstream commit
dbe954d8f1635f949a1d9a5d6e6fb749ae022b47 ]
Sometimes regulator_get() gets called twice for the same supply on the
same device. This may happen e.g. when a framework / library is used
which uses the regulator; and the driver itself also needs to enable
the regulator in some cases where the framework will not enable it.
Commit
ff268b56ce8c ("regulator: core: Don't spew backtraces on
duplicate sysfs") already takes care of the backtrace which would
trigger when creating a duplicate consumer symlink under
/sys/class/regulator/regulator.%d in this scenario.
Commit
c33d442328f5 ("debugfs: make error message a bit more verbose")
causes a new error to get logged in this scenario:
[ 26.938425] debugfs: Directory 'wm5102-codec-MICVDD' with parent 'spi-WM510204:00-MICVDD' already present!
There is no _nowarn variant of debugfs_create_dir(), but we can detect
and avoid this problem by checking the return value of the earlier
sysfs_create_link_nowarn() call.
Add a check for the earlier sysfs_create_link_nowarn() failing with
-EEXIST and skip the debugfs_create_dir() call in that case, avoiding
this error getting logged.
Fixes:
c33d442328f5 ("debugfs: make error message a bit more verbose")
Cc: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210122183250.370571-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Osipenko [Fri, 22 Jan 2021 19:17:34 +0000 (22:17 +0300)]
power: supply: smb347-charger: Fix interrupt usage if interrupt is unavailable
[ Upstream commit
6996312642d2dad3070c3d276c7621f35e721f30 ]
The IRQ=0 could be a valid interrupt number in kernel because interrupt
numbers are virtual in a modern kernel. Hence fix the interrupt usage in
a case if interrupt is unavailable by not overriding the interrupt number
which is used by the driver.
Note that currently Nexus 7 is the only know device which uses SMB347
kernel diver and it has a properly working interrupt, hence this patch
doesn't fix any real problems, it's a minor cleanup/improvement.
Fixes:
99298de5df92 ("power: supply: smb347-charger: Replace mutex with IRQ disable/enable")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Samuel Holland [Sun, 24 Jan 2021 15:24:21 +0000 (09:24 -0600)]
power: supply: axp20x_usb_power: Init work before enabling IRQs
[ Upstream commit
b5e8642ed95ff6ecc20cc6038fe831affa9d098c ]
The IRQ handler calls mod_delayed_work() on power->vbus_detect. However,
that work item is not initialized until after the IRQs are enabled. If
an IRQ is already pending when the driver is probed, the driver calls
mod_delayed_work() on an uninitialized work item, which causes an oops.
Fixes:
bcfb7ae3f50b ("power: supply: axp20x_usb_power: Only poll while offline")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Krzysztof Kozlowski [Thu, 21 Jan 2021 15:59:14 +0000 (16:59 +0100)]
regulator: s5m8767: Drop regulators OF node reference
[ Upstream commit
a5872bd3398d0ff2ce4c77794bc7837899c69024 ]
The device node reference obtained with of_get_child_by_name() should be
dropped on error paths.
Fixes:
26aec009f6b6 ("regulator: add device tree support for s5m8767")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20210121155914.48034-1-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pan Bian [Wed, 20 Jan 2021 05:00:25 +0000 (21:00 -0800)]
spi: atmel: Put allocated master before return
[ Upstream commit
21ea2743f015dbacec1831bdc8afc848db9c2b8c ]
The allocated master is not released. Goto error handling label rather
than directly return.
Fixes:
5e9af37e46bc ("spi: atmel: introduce probe deferring")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Fixes:
5e9af37e46bc ("spi: atmel: introduce probe deferring")
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20210120050025.25426-1-bianpan2016@163.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pan Bian [Thu, 21 Jan 2021 03:27:56 +0000 (19:27 -0800)]
regulator: s5m8767: Fix reference count leak
[ Upstream commit
dea6dd2ba63f8c8532addb8f32daf7b89a368a42 ]
Call of_node_put() to drop references of regulators_np and reg_np before
returning error code.
Fixes:
9ae5cc75ceaa ("regulator: s5m8767: Pass descriptor instead of GPIO number")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20210121032756.49501-1-bianpan2016@163.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Howells [Fri, 20 Nov 2020 18:04:23 +0000 (19:04 +0100)]
certs: Fix blacklist flag type confusion
[ Upstream commit
4993e1f9479a4161fd7d93e2b8b30b438f00cb0f ]
KEY_FLAG_KEEP is not meant to be passed to keyring_alloc() or key_alloc(),
as these only take KEY_ALLOC_* flags. KEY_FLAG_KEEP has the same value as
KEY_ALLOC_BYPASS_RESTRICTION, but fortunately only key_create_or_update()
uses it. LSMs using the key_alloc hook don't check that flag.
KEY_FLAG_KEEP is then ignored but fortunately (again) the root user cannot
write to the blacklist keyring, so it is not possible to remove a key/hash
from it.
Fix this by adding a KEY_ALLOC_SET_KEEP flag that tells key_alloc() to set
KEY_FLAG_KEEP on the new key. blacklist_init() can then, correctly, pass
this to keyring_alloc().
We can also use this in ima_mok_init() rather than setting the flag
manually.
Note that this doesn't fix an observable bug with the current
implementation but it is required to allow addition of new hashes to the
blacklist in the future without making it possible for them to be removed.
Fixes:
734114f8782f ("KEYS: Add a system blacklist keyring")
Reported-by: Mickaël Salaün <mic@linux.microsoft.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Mickaël Salaün <mic@linux.microsoft.com>
cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gabriel Krisman Bertazi [Tue, 24 Nov 2020 20:28:02 +0000 (15:28 -0500)]
watch_queue: Drop references to /dev/watch_queue
[ Upstream commit
8fe62e0c0e2efa5437f3ee81b65d69e70a45ecd2 ]
The merged API doesn't use a watch_queue device, but instead relies on
pipes, so let the documentation reflect that.
Fixes:
f7e47677e39a ("watch_queue: Add a key/keyring notification facility")
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Ben Boeckel <mathstuf@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pan Bian [Wed, 20 Jan 2021 12:33:13 +0000 (04:33 -0800)]
regulator: axp20x: Fix reference cout leak
[ Upstream commit
e78bf6be7edaacb39778f3a89416caddfc6c6d70 ]
Decrements the reference count of device node and its child node.
Fixes:
dfe7a1b058bb ("regulator: AXP20x: Add support for regulators subsystem")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Link: https://lore.kernel.org/r/20210120123313.107640-1-bianpan2016@163.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Evan Benn [Wed, 9 Dec 2020 22:03:55 +0000 (22:03 +0000)]
platform/chrome: cros_ec_proto: Add LID and BATTERY to default mask
[ Upstream commit
852405d8efcbca0e02f14592fb1d1dcd0d3fb508 ]
After 'platform/chrome: cros_ec_proto: Use EC_HOST_EVENT_MASK not BIT'
some of the flags are not quite correct.
LID_CLOSED is used to suspend the device, so it makes sense to ignore that.
BATTERY events are also frequent and causing spurious wakes on elm/hana
mt8173 devices.
Fixes:
c214e564acb2 ("platform/chrome: cros_ec_proto: ignore unnecessary wakeups on old ECs")
Signed-off-by: Evan Benn <evanbenn@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20201209220306.2.I3291bf83e4884c206b097ede34780e014fa3e265@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
Evan Benn [Wed, 9 Dec 2020 22:03:54 +0000 (22:03 +0000)]
platform/chrome: cros_ec_proto: Use EC_HOST_EVENT_MASK not BIT
[ Upstream commit
0944ea07baa748741563c8842122010fa9017d16 ]
The host_event_code enum is 1-based, use EC_HOST_EVENT_MASK not BIT to
generate the intended mask. This patch changes the behaviour of the
mask, a following patch will restore the intended behaviour:
'Add LID and BATTERY to default mask'
Fixes:
c214e564acb2 ("platform/chrome: cros_ec_proto: ignore unnecessary wakeups on old ECs")
Signed-off-by: Evan Benn <evanbenn@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20201209220306.1.I6133572c0ab3c6b95426f804bac2d3833e24acb1@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andre Przywara [Mon, 18 Jan 2021 00:09:12 +0000 (00:09 +0000)]
clk: sunxi-ng: h6: Fix clock divider range on some clocks
[ Upstream commit
04ef679591c76571a9e7d5ca48316cc86fa0ef12 ]
While comparing clocks between the H6 and H616, some of the M factor
ranges were found to be wrong: the manual says they are only covering
two bits [1:0], but our code had "5" in the number-of-bits field.
By writing 0xff into that register in U-Boot and via FEL, it could be
confirmed that bits [4:2] are indeed masked off, so the manual is right.
Change to number of bits in the affected clock's description.
Fixes:
524353ea480b ("clk: sunxi-ng: add support for the Allwinner H6 CCU")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210118000912.28116-1-andre.przywara@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Parav Pandit [Wed, 13 Jan 2021 12:17:01 +0000 (14:17 +0200)]
IB/mlx5: Add mutex destroy call to cap_mask_mutex mutex
[ Upstream commit
ab40530a2e0a7aca9a5187824c4fb072f3916e85 ]
mutex_destroy() call for device's cap_mask_mutex mutex is missing, let's
add it to annotate destruction.
Fixes:
e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Link: https://lore.kernel.org/r/20210113121703.559778-4-leon@kernel.org
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yishai Hadas [Wed, 30 Dec 2020 13:01:19 +0000 (15:01 +0200)]
RDMA/mlx5: Use the correct obj_id upon DEVX TIR creation
[ Upstream commit
8798e4ad0abe0ba1221928a46561981c510be0c6 ]
Use the correct obj_id upon DEVX TIR creation by strictly taking the tirn
24 bits and not the general obj_id which is 32 bits.
Fixes:
7efce3691d33 ("IB/mlx5: Add obj create and destroy functionality")
Link: https://lore.kernel.org/r/20201230130121.180350-2-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guido Günther [Mon, 18 Jan 2021 16:31:10 +0000 (17:31 +0100)]
spi: imx: Don't print error on -EPROBEDEFER
[ Upstream commit
8346633f2c87713a1852d802305e03555e9a9fce ]
This avoids
[ 0.962538] spi_imx
30820000.spi: bitbang start failed with -517
durig driver probe.
Fixes:
8197f489f4c4 ("spi: imx: Fix failure path leak on GPIO request error correctly")
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/0f51ab42e7c7a3452f2f8652794d81584303ea0d.1610987414.git.agx@sigxcpu.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tom Rix [Mon, 18 Jan 2021 21:19:55 +0000 (13:19 -0800)]
clocksource/drivers/mxs_timer: Add missing semicolon when DEBUG is defined
[ Upstream commit
7da390694afbaed8e0f05717a541dfaf1077ba51 ]
When DEBUG is defined this error occurs
drivers/clocksource/mxs_timer.c:138:1: error:
expected ‘;’ before ‘}’ token
The preceding statement needs a semicolon.
Replace pr_info() with pr_debug() and remove the unneeded ifdef.
Fixes:
eb8703e2ef7c ("clockevents/drivers/mxs: Migrate to new 'set-state' interface")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210118211955.763609-1-trix@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Sun, 3 Jan 2021 13:59:24 +0000 (14:59 +0100)]
clocksource/drivers/ixp4xx: Select TIMER_OF when needed
[ Upstream commit
7a3b8758bd6e45f7b671723b5c9fa2b69d0787ae ]
Compile-testing the ixp4xx timer with CONFIG_OF enabled but
CONFIG_TIMER_OF disabled leads to a harmless warning:
arm-linux-gnueabi-ld: warning: orphan section `__timer_of_table' from `drivers/clocksource/timer-ixp4xx.o' being placed in section `__timer_of_table'
Move the select statement from the platform code into the driver
so it always gets enabled in configurations that rely on it.
Fixes:
40df14cc5cc0 ("clocksource/drivers/ixp4xx: Add OF initialization support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210103135955.3808976-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randy Dunlap [Sat, 16 Jan 2021 21:13:10 +0000 (13:13 -0800)]
power: supply: fix sbs-charger build, needs REGMAP_I2C
[ Upstream commit
a4bdea2004b28f47ab48ea99172eda8628f6fb44 ]
CHARGER_SBS should select REGMAP_I2C since it uses API(s) that are
provided by that Kconfig symbol.
Fixes these errors:
../drivers/power/supply/sbs-charger.c:149:21: error: variable ‘sbs_regmap’ has initializer but incomplete type
static const struct regmap_config sbs_regmap = {
../drivers/power/supply/sbs-charger.c:150:3: error: ‘const struct regmap_config’ has no member named ‘reg_bits’
.reg_bits = 8,
../drivers/power/supply/sbs-charger.c:155:23: error: ‘REGMAP_ENDIAN_LITTLE’ undeclared here (not in a function)
.val_format_endian = REGMAP_ENDIAN_LITTLE, /* since based on SMBus */
../drivers/power/supply/sbs-charger.c: In function ‘sbs_probe’:
../drivers/power/supply/sbs-charger.c:183:17: error: implicit declaration of function ‘devm_regmap_init_i2c’; did you mean ‘devm_request_irq’? [-Werror=implicit-function-declaration]
chip->regmap = devm_regmap_init_i2c(client, &sbs_regmap);
../drivers/power/supply/sbs-charger.c: At top level:
../drivers/power/supply/sbs-charger.c:149:35: error: storage size of ‘sbs_regmap’ isn’t known
static const struct regmap_config sbs_regmap = {
Fixes:
feb583e37f8a ("power: supply: add sbs-charger driver")
Reported-by: Martin Mokrejs <mmokrejs@fold.natur.cuni.cz>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Martin Mokrejs <mmokrejs@fold.natur.cuni.cz>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dave Jiang [Fri, 15 Jan 2021 21:53:07 +0000 (14:53 -0700)]
dmaengine: idxd: set DMA channel to be private
[ Upstream commit
c06e424be5f5184468c5f761c0d2cf1ed0a4e0fc ]
Add DMA_PRIVATE attribute flag to idxd DMA channels. The dedicated WQs are
expected to be used by a single client and not shared. While doing NTB
testing this mistake was discovered, which prevented ntb_transport from
requesting DSA wqs as DMA channels via dma_request_channel().
Reported-by: Srinijia Kambham <srinija.kambham@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Tested-by: Srinijia Kambham <srinija.kambham@intel.com>
Fixes:
8f47d1a5e545 ("dmaengine: idxd: connect idxd to dmaengine subsystem")
Link: https://lore.kernel.org/r/161074758743.2184057.3388557138816350980.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bartosz Golaszewski [Thu, 14 Jan 2021 10:22:17 +0000 (11:22 +0100)]
rtc: s5m: select REGMAP_I2C
[ Upstream commit
1f0cbda3b452b520c5f3794f8f0e410e8bc7386a ]
The rtc-s5m uses the I2C regmap but doesn't select it in Kconfig so
depending on the configuration the build may fail. Fix it.
Fixes:
959df7778bbd ("rtc: Enable compile testing for Maxim and Samsung drivers")
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210114102219.23682-2-brgl@bgdev.pl
Signed-off-by: Sasha Levin <sashal@kernel.org>
Claudiu Beznea [Wed, 16 Dec 2020 12:57:31 +0000 (14:57 +0200)]
power: reset: at91-sama5d2_shdwc: fix wkupdbc mask
[ Upstream commit
95aa21a3f1183260db1b0395e03df5bebc5ed641 ]
According to datasheet WKUPDBC mask is b/w bits 26..24.
Fixes:
f80cb48843987 ("power: reset: at91-shdwc: add new shutdown controller driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jack Wang [Thu, 17 Dec 2020 14:19:14 +0000 (15:19 +0100)]
RDMA/rtrs-srv: Init wr_cnt as 1
[ Upstream commit
6f5d1b3016d650f351e65c645a5eee5394547dd0 ]
Fix up wr_avail accounting. if wr_cnt is 0, then we do SIGNAL for first
wr, in completion we add queue_depth back, which is not right in the
sense of tracking for available wr.
So fix it by init wr_cnt to 1.
Fixes:
9cb837480424 ("RDMA/rtrs: server: main functionality")
Link: https://lore.kernel.org/r/20201217141915.56989-19-jinpu.wang@cloud.ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guoqing Jiang [Thu, 17 Dec 2020 14:19:10 +0000 (15:19 +0100)]
RDMA/rtrs-clt: Refactor the failure cases in alloc_clt
[ Upstream commit
eab098246625e91c1cbd6e8f75b09e4c9c28a9fc ]
Make all failure cases go to the common path to avoid duplicate code.
And some issued existed before.
1. clt need to be freed to avoid memory leak.
2. return ERR_PTR(-ENOMEM) if kobject_create_and_add fails, because
rtrs_clt_open checks the return value of by call "IS_ERR(clt)".
Fixes:
6a98d71daea1 ("RDMA/rtrs: client: main functionality")
Link: https://lore.kernel.org/r/20201217141915.56989-15-jinpu.wang@cloud.ionos.com
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jack Wang [Thu, 17 Dec 2020 14:19:09 +0000 (15:19 +0100)]
RDMA/rtrs-srv: Fix missing wr_cqe
[ Upstream commit
8537f2de6519945890a2b0f3739b23f32b5c0a89 ]
We had a few places wr_cqe is not set, which could lead to NULL pointer
deref or GPF in error case.
Fixes:
9cb837480424 ("RDMA/rtrs: server: main functionality")
Link: https://lore.kernel.org/r/20201217141915.56989-14-jinpu.wang@cloud.ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guoqing Jiang [Thu, 17 Dec 2020 14:19:03 +0000 (15:19 +0100)]
RDMA/rtrs: Call kobject_put in the failure path
[ Upstream commit
424774c9f3fa100ef7d9cfb9ee211e2ba1cd5119 ]
Per the comment of kobject_init_and_add, we need to free the memory
by call kobject_put.
Fixes:
215378b838df ("RDMA/rtrs: client: sysfs interface functions")
Fixes:
91b11610af8d ("RDMA/rtrs: server: sysfs interface functions")
Link: https://lore.kernel.org/r/20201217141915.56989-8-jinpu.wang@cloud.ionos.com
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Reviewed-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jack Wang [Thu, 17 Dec 2020 14:19:01 +0000 (15:19 +0100)]
RDMA/rtrs-clt: Set mininum limit when create QP
[ Upstream commit
f47e4e3e71724f625958b0059f6c8ac5d44d27ef ]
Currently rtrs when create_qp use a coarse numbers (bigger in general),
which leads to hardware create more resources which only waste memory
with no benefits.
- SERVICE con,
For max_send_wr/max_recv_wr, it's 2 times SERVICE_CON_QUEUE_DEPTH + 2
- IO con
For max_send_wr/max_recv_wr, it's sess->queue_depth * 3 + 1
Fixes:
6a98d71daea1 ("RDMA/rtrs: client: main functionality")
Link: https://lore.kernel.org/r/20201217141915.56989-6-jinpu.wang@cloud.ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jack Wang [Thu, 17 Dec 2020 14:19:00 +0000 (15:19 +0100)]
RDMA/rtrs-srv: Use sysfs_remove_file_self for disconnect
[ Upstream commit
f991fdac813f1598a9bb17b602ce04812ba9148c ]
Remove self first to avoid deadlock, we don't want to
use close_work to remove sess sysfs.
Fixes:
91b11610af8d ("RDMA/rtrs: server: sysfs interface functions")
Link: https://lore.kernel.org/r/20201217141915.56989-5-jinpu.wang@cloud.ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Tested-by: Lutz Pogrell <lutz.pogrell@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jack Wang [Thu, 17 Dec 2020 14:18:59 +0000 (15:18 +0100)]
RDMA/rtrs-srv: Release lock before call into close_sess
[ Upstream commit
99f0c3807973359bba8f37d9198eea59fe38c32a ]
In this error case, we don't need hold mutex to call close_sess.
Fixes:
9cb837480424 ("RDMA/rtrs: server: main functionality")
Link: https://lore.kernel.org/r/20201217141915.56989-4-jinpu.wang@cloud.ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Tested-by: Lutz Pogrell <lutz.pogrell@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jack Wang [Thu, 17 Dec 2020 14:18:57 +0000 (15:18 +0100)]
RDMA/rtrs: Extend ibtrs_cq_qp_create
[ Upstream commit
7490fd1fe836ba3c7eda7a4b1cfd9e44389ffda5 ]
rtrs does not have same limit for both max_send_wr and max_recv_wr,
To allow client and server set different values, export in a separate
parameter for rtrs_cq_qp_create.
Also fix the type accordingly, u32 should be used instead of u16.
Fixes:
c0894b3ea69d ("RDMA/rtrs: core: lib functions shared between client and server modules")
Link: https://lore.kernel.org/r/20201217141915.56989-2-jinpu.wang@cloud.ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nicolas Boichat [Fri, 15 Jan 2021 11:45:44 +0000 (11:45 +0000)]
of/fdt: Make sure no-map does not remove already reserved regions
[ Upstream commit
8a5a75e5e9e55de1cef5d83ca3589cb4899193ef ]
If the device tree is incorrectly configured, and attempts to
define a "no-map" reserved memory that overlaps with the kernel
data/code, the kernel would crash quickly after boot, with no
obvious clue about the nature of the issue.
For example, this would happen if we have the kernel mapped at
these addresses (from /proc/iomem):
40000000-
41ffffff : System RAM
40080000-
40dfffff : Kernel code
40e00000-
411fffff : reserved
41200000-
413e0fff : Kernel data
And we declare a no-map shared-dma-pool region at a fixed address
within that range:
mem_reserved: mem_region {
compatible = "shared-dma-pool";
reg = <0 0x40000000 0 0x01A00000>;
no-map;
};
To fix this, when removing memory regions at early boot (which is
what "no-map" regions do), we need to make sure that the memory
is not already reserved. If we do, __reserved_mem_reserve_reg
will throw an error:
[ 0.000000] OF: fdt: Reserved memory: failed to reserve memory
for node 'mem_region': base 0x0000000040000000, size 26 MiB
and the code that will try to use the region should also fail,
later on.
We do not do anything for non-"no-map" regions, as memblock
explicitly allows reserved regions to overlap, and the commit
that this fixes removed the check for that precise reason.
[ qperret: fixed conflicts caused by the usage of memblock_mark_nomap ]
Fixes:
094cb98179f19b7 ("of/fdt: memblock_reserve /memreserve/ regions in the case of partial overlap")
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20210115114544.1830068-3-qperret@google.com
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
KarimAllah Ahmed [Fri, 15 Jan 2021 11:45:43 +0000 (11:45 +0000)]
fdt: Properly handle "no-map" field in the memory region
[ Upstream commit
86588296acbfb1591e92ba60221e95677ecadb43 ]
Mark the memory region with NOMAP flag instead of completely removing it
from the memory blocks. That makes the FDT handling consistent with the EFI
memory map handling.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20210115114544.1830068-2-qperret@google.com
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Colin Ian King [Fri, 15 Jan 2021 13:15:24 +0000 (13:15 +0000)]
power: supply: cpcap-charger: Fix power_supply_put on null battery pointer
[ Upstream commit
39196cfe10dd2b46ee28b44abbc0db4f4cb7822f ]
Currently if the pointer battery is null there is a null pointer
dereference on the call to power_supply_put. Fix this by only
performing the put if battery is not null.
Addresses-Coverity: ("Dereference after null check")
Fixes:
4bff91bb3231 ("power: supply: cpcap-charger: Fix missing power_supply_put()")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tony Lindgren [Sun, 10 Jan 2021 19:53:50 +0000 (21:53 +0200)]
power: supply: cpcap-battery: Fix missing power_supply_put()
[ Upstream commit
97456a24acb41b74ab6910f40fb8f09b206fd3b5 ]
Fix missing power_supply_put().
Cc: Arthur Demchenkov <spinal.by@gmail.com>
Cc: Carl Philipp Klemm <philipp@uvos.xyz>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Fixes:
8b0134cc14b9 ("power: supply: cpcap-battery: Fix handling of lowered charger voltage")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tony Lindgren [Sun, 10 Jan 2021 19:53:49 +0000 (21:53 +0200)]
power: supply: cpcap-charger: Fix missing power_supply_put()
[ Upstream commit
4bff91bb3231882b530af794c92ac3a5fe199481 ]
Fix missing power_supply_put().
Cc: Arthur Demchenkov <spinal.by@gmail.com>
Cc: Carl Philipp Klemm <philipp@uvos.xyz>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Fixes:
5688ea049233 ("power: supply: cpcap-charger: Allow changing constant charge voltage")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yoshihiro Shimoda [Tue, 12 Jan 2021 09:00:56 +0000 (18:00 +0900)]
mfd: bd9571mwv: Use devm_mfd_add_devices()
[ Upstream commit
c58ad0f2b052b5675d6394e03713ee41e721b44c ]
To remove mfd devices when unload this driver, should use
devm_mfd_add_devices() instead.
Fixes:
d3ea21272094 ("mfd: Add ROHM BD9571MWV-M MFD PMIC driver")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ferry Toth [Tue, 12 Jan 2021 22:37:49 +0000 (23:37 +0100)]
dmaengine: hsu: disable spurious interrupt
[ Upstream commit
035b73b2b3b2e074a56489a7bf84b6a8012c0e0d ]
On Intel Tangier B0 and Anniedale the interrupt line, disregarding
to have different numbers, is shared between HSU DMA and UART IPs.
Thus on such SoCs we are expecting that IRQ handler is called in
UART driver only. hsu_pci_irq was handling the spurious interrupt
from HSU DMA by returning immediately. This wastes CPU time and
since HSU DMA and HSU UART interrupt occur simultaneously they race
to be handled causing delay to the HSU UART interrupt handling.
Fix this by disabling the interrupt entirely.
Fixes:
4831e0d9054c ("serial: 8250_mid: handle interrupt correctly in DMA case")
Signed-off-by: Ferry Toth <ftoth@exalondelft.nl>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210112223749.97036-1-ftoth@exalondelft.nl
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Sat, 12 Dec 2020 16:25:35 +0000 (17:25 +0100)]
dmaengine: owl-dma: Fix a resource leak in the remove function
[ Upstream commit
1f0a16f04113f9f0ab0c8e6d3abe661edab549e6 ]
A 'dma_pool_destroy()' call is missing in the remove function.
Add it.
This call is already made in the error handling path of the probe function.
Fixes:
47e20577c24d ("dmaengine: Add Actions Semi Owl family S900 DMA driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20201212162535.95727-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Sat, 12 Dec 2020 16:06:14 +0000 (17:06 +0100)]
dmaengine: fsldma: Fix a resource leak in an error handling path of the probe function
[ Upstream commit
b202d4e82531a62a33a6b14d321dd2aad491578e ]
In case of error, the previous 'fsl_dma_chan_probe()' calls must be undone
by some 'fsl_dma_chan_remove()', as already done in the remove function.
It was added in the remove function in commit
77cd62e8082b ("fsldma: allow
Freescale Elo DMA driver to be compiled as a module")
Fixes:
d3f620b2c4fe ("fsldma: simplify IRQ probing and handling")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20201212160614.92576-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Sat, 12 Dec 2020 16:05:16 +0000 (17:05 +0100)]
dmaengine: fsldma: Fix a resource leak in the remove function
[ Upstream commit
cbc0ad004c03ad7971726a5db3ec84dba3dcb857 ]
A 'irq_dispose_mapping()' call is missing in the remove function.
Add it.
This is needed to undo the 'irq_of_parse_and_map() call from the probe
function and already part of the error handling path of the probe function.
It was added in the probe function only in commit
d3f620b2c4fe ("fsldma:
simplify IRQ probing and handling")
Fixes:
77cd62e8082b ("fsldma: allow Freescale Elo DMA driver to be compiled as a module")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20201212160516.92515-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bernard Metzler [Fri, 8 Jan 2021 12:58:45 +0000 (13:58 +0100)]
RDMA/siw: Fix handling of zero-sized Read and Receive Queues.
[ Upstream commit
661f385961f06f36da24cf408d461f988d0c39ad ]
During connection setup, the application may choose to zero-size inbound
and outbound READ queues, as well as the Receive queue. This patch fixes
handling of zero-sized queues, but not prevents it.
Kamal Heib says in an initial error report:
When running the blktests over siw the following shift-out-of-bounds is
reported, this is happening because the passed IRD or ORD from the ulp
could be zero which will lead to unexpected behavior when calling
roundup_pow_of_two(), fix that by blocking zero values of ORD or IRD.
UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13
shift exponent 64 is too large for 64-bit type 'long unsigned int'
CPU: 20 PID: 3957 Comm: kworker/u64:13 Tainted: G S 5.10.0-rc6 #2
Hardware name: Dell Inc. PowerEdge R630/02C2CP, BIOS 2.1.5 04/11/2016
Workqueue: iw_cm_wq cm_work_handler [iw_cm]
Call Trace:
dump_stack+0x99/0xcb
ubsan_epilogue+0x5/0x40
__ubsan_handle_shift_out_of_bounds.cold.11+0xb4/0xf3
? down_write+0x183/0x3d0
siw_qp_modify.cold.8+0x2d/0x32 [siw]
? __local_bh_enable_ip+0xa5/0xf0
siw_accept+0x906/0x1b60 [siw]
? xa_load+0x147/0x1f0
? siw_connect+0x17a0/0x17a0 [siw]
? lock_downgrade+0x700/0x700
? siw_get_base_qp+0x1c2/0x340 [siw]
? _raw_spin_unlock_irqrestore+0x39/0x40
iw_cm_accept+0x1f4/0x430 [iw_cm]
rdma_accept+0x3fa/0xb10 [rdma_cm]
? check_flush_dependency+0x410/0x410
? cma_rep_recv+0x570/0x570 [rdma_cm]
nvmet_rdma_queue_connect+0x1a62/0x2680 [nvmet_rdma]
? nvmet_rdma_alloc_cmds+0xce0/0xce0 [nvmet_rdma]
? lock_release+0x56e/0xcc0
? lock_downgrade+0x700/0x700
? lock_downgrade+0x700/0x700
? __xa_alloc_cyclic+0xef/0x350
? __xa_alloc+0x2d0/0x2d0
? rdma_restrack_add+0xbe/0x2c0 [ib_core]
? __ww_mutex_die+0x190/0x190
cma_cm_event_handler+0xf2/0x500 [rdma_cm]
iw_conn_req_handler+0x910/0xcb0 [rdma_cm]
? _raw_spin_unlock_irqrestore+0x39/0x40
? trace_hardirqs_on+0x1c/0x150
? cma_ib_handler+0x8a0/0x8a0 [rdma_cm]
? __kasan_kmalloc.constprop.7+0xc1/0xd0
cm_work_handler+0x121c/0x17a0 [iw_cm]
? iw_cm_reject+0x190/0x190 [iw_cm]
? trace_hardirqs_on+0x1c/0x150
process_one_work+0x8fb/0x16c0
? pwq_dec_nr_in_flight+0x320/0x320
worker_thread+0x87/0xb40
? __kthread_parkme+0xd1/0x1a0
? process_one_work+0x16c0/0x16c0
kthread+0x35f/0x430
? kthread_mod_delayed_work+0x180/0x180
ret_from_fork+0x22/0x30
Fixes:
a531975279f3 ("rdma/siw: main include file")
Fixes:
f29dd55b0236 ("rdma/siw: queue pair methods")
Fixes:
8b6a361b8c48 ("rdma/siw: receive path")
Fixes:
b9be6f18cf9e ("rdma/siw: transmit path")
Fixes:
303ae1cdfdf7 ("rdma/siw: application interface")
Link: https://lore.kernel.org/r/20210108125845.1803-1-bmt@zurich.ibm.com
Reported-by: Kamal Heib <kamalheib1@gmail.com>
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randy Dunlap [Thu, 17 Dec 2020 01:12:21 +0000 (17:12 -0800)]
HID: core: detect and skip invalid inputs to snto32()
[ Upstream commit
a0312af1f94d13800e63a7d0a66e563582e39aec ]
Prevent invalid (0, 0) inputs to hid-core's snto32() function.
Maybe it is just the dummy device here that is causing this, but
there are hundreds of calls to snto32(0, 0). Having n (bits count)
of 0 is causing the current UBSAN trap with a shift value of
0xffffffff (-1, or n - 1 in this function).
Either of the value to shift being 0 or the bits count being 0 can be
handled by just returning 0 to the caller, avoiding the following
complex shift + OR operations:
return value & (1 << (n - 1)) ? value | (~0U << n) : value;
Fixes:
dde5845a529f ("[PATCH] Generic HID layer - code split")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: syzbot+1e911ad71dd4ea72e04a@syzkaller.appspotmail.com
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Mon, 19 Oct 2020 12:06:10 +0000 (14:06 +0200)]
clk: renesas: r8a779a0: Fix parent of CBFUSA clock
[ Upstream commit
80d3e07ec509c5098d44e4f1416cc9f133fd436f ]
According to Figure 8.1.1 ("Block Diagram of CPG (R-Car V3U-AD)") in the
R-Car V3U Series User's Manual Rev. 0.5, the parent of the CBFUSA clock
is EXTAL.
Fixes:
17bcc8035d2d19fc ("clk: renesas: cpg-mssr: Add support for R-Car V3U")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20201019120614.22149-3-geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Mon, 19 Oct 2020 12:06:09 +0000 (14:06 +0200)]
clk: renesas: r8a779a0: Remove non-existent S2 clock
[ Upstream commit
5b30be15ca262d9cb2c36b173bb488e8d1952ea0 ]
The S2 internal core clock does not exist on R-Car V3U. Remove it.
Fixes:
17bcc8035d2d19fc ("clk: renesas: cpg-mssr: Add support for R-Car V3U")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20201019120614.22149-2-geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andre Przywara [Wed, 6 Jan 2021 14:32:46 +0000 (14:32 +0000)]
clk: sunxi-ng: h6: Fix CEC clock
[ Upstream commit
756650820abd4770c4200763505b634a3c04e05e ]
The CEC clock on the H6 SoC is a bit special, since it uses a fixed
pre-dividier for one source clock (the PLL), but conveys the other clock
(32K OSC) directly.
We are using a fixed predivider array for that, but fail to use the right
flag to actually activate that.
Fixes:
524353ea480b ("clk: sunxi-ng: add support for the Allwinner H6 CCU")
Reported-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210106143246.11255-1-andre.przywara@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pratyush Yadav [Tue, 22 Dec 2020 18:44:20 +0000 (00:14 +0530)]
spi: cadence-quadspi: Abort read if dummy cycles required are too many
[ Upstream commit
ceeda328edeeeeac7579e9dbf0610785a3b83d39 ]
The controller can only support up to 31 dummy cycles. If the command
requires more it falls back to using 31. This command is likely to fail
because the correct number of cycles are not waited upon. Rather than
silently issuing an incorrect command, fail loudly so the caller can get
a chance to find out the command can't be supported by the controller.
Fixes:
140623410536 ("mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller")
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20201222184425.7028-3-p.yadav@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rayagonda Kokatanur [Mon, 2 Nov 2020 03:54:32 +0000 (09:24 +0530)]
i2c: iproc: handle master read request
[ Upstream commit
e21d79778768e4e187b2892d662c6aaa01e1d399 ]
Handle single or multi byte master read request with or without
repeated start.
Fixes:
c245d94ed106 ("i2c: iproc: Add multi byte read-write support for slave mode")
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Acked-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rayagonda Kokatanur [Mon, 2 Nov 2020 03:54:30 +0000 (09:24 +0530)]
i2c: iproc: update slave isr mask (ISR_MASK_SLAVE)
[ Upstream commit
603e77af7b0704bdb057de0368f1f2b04fc9552c ]
Update slave isr mask (ISR_MASK_SLAVE) to include remaining
two slave interrupts.
Fixes:
c245d94ed106 ("i2c: iproc: Add multi byte read-write support for slave mode")
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Acked-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rayagonda Kokatanur [Mon, 2 Nov 2020 03:54:29 +0000 (09:24 +0530)]
i2c: iproc: handle only slave interrupts which are enabled
[ Upstream commit
545f4011e156554d704d6278245d54543f6680d1 ]
Handle only slave interrupts which are enabled.
The IS_OFFSET register contains the interrupt status bits which will be
set regardless of the enabling of the corresponding interrupt condition.
One must therefore look at both IS_OFFSET and IE_OFFSET to determine
whether an interrupt condition is set and enabled.
Fixes:
c245d94ed106 ("i2c: iproc: Add multi byte read-write support for slave mode")
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Acked-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jan Kara [Tue, 22 Dec 2020 11:09:53 +0000 (12:09 +0100)]
quota: Fix memory leak when handling corrupted quota file
[ Upstream commit
a4db1072e1a3bd7a8d9c356e1902b13ac5deb8ef ]
When checking corrupted quota file we can bail out and leak allocated
info structure. Properly free info structure on error return.
Reported-by: syzbot+77779c9b52ab78154b08@syzkaller.appspotmail.com
Fixes:
11c514a99bb9 ("quota: Sanity-check quota file headers on load")
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Baryshkov [Thu, 31 Dec 2020 12:23:48 +0000 (15:23 +0300)]
arm64: dts: qcom: qrb5165-rb5: fix pm8009 regulators
[ Upstream commit
c3da02421230639bf6ee5462b70b58f5b7f3b7c6 ]
Fix pm8009 compatibility string to reference pm8009 revision specific to
sm8250 platform. Also add S2 regulator to be used for qca639x.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes:
b1d2674e6121 ("arm64: dts: qcom: Add basic devicetree support for QRB5165 RB5")
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201231122348.637917-5-dmitry.baryshkov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Baryshkov [Thu, 31 Dec 2020 12:23:47 +0000 (15:23 +0300)]
regulator: qcom-rpmh-regulator: add pm8009-1 chip revision
[ Upstream commit
951384cabc5dfb09251d440dbc26058eba86f97e ]
PM8009 has special revision (P=1), which is to be used for sm8250
platform. The major difference is the S2 regulator which supplies 0.95 V
instead of 2.848V. Declare regulators data to be used for this chip
revision. The datasheet calls the chip just pm8009-1, so use the same
name.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes:
06369bcc15a1 ("regulator: qcom-rpmh: Add support for SM8150")
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201231122348.637917-4-dmitry.baryshkov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Po-Hsu Lin [Mon, 28 Dec 2020 04:34:59 +0000 (12:34 +0800)]
selftests/powerpc: Make the test check in eeh-basic.sh posix compliant
[ Upstream commit
3db380570af7052620ace20c29e244938610ca71 ]
The == operand is a bash extension, thus this will fail on Ubuntu
with:
./eeh-basic.sh: 89: test: 2: unexpected operator
As the /bin/sh on Ubuntu is pointed to DASH.
Use -eq to fix this posix compatibility issue.
Fixes:
996f9e0f93f162 ("selftests/powerpc: Fix eeh-basic.sh exit codes")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201228043459.14281-1-po-hsu.lin@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Martin Blumenstingl [Sat, 26 Dec 2020 12:15:56 +0000 (13:15 +0100)]
clk: meson: clk-pll: propagate the error from meson_clk_pll_set_rate()
[ Upstream commit
ccdc1f0836f8e37b558a424f1e491f929b2e7ede ]
Popagate the error code from meson_clk_pll_set_rate() when the PLL does
not lock with the new settings.
Fixes:
722825dcd54b2e ("clk: meson: migrate plls clocks to clk_regmap")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20201226121556.975418-4-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Martin Blumenstingl [Sat, 26 Dec 2020 12:15:55 +0000 (13:15 +0100)]
clk: meson: clk-pll: make "ret" a signed integer
[ Upstream commit
9e717285f0bd591d716fa0e7418f2cdaf756dd25 ]
The error codes returned by meson_clk_get_pll_settings() are all
negative. Make "ret" a signed integer in meson_clk_pll_set_rate() to
make it match with the clk_ops.set_rate API as well as the data type
returned by meson_clk_get_pll_settings().
Fixes:
8eed1db1adec6a ("clk: meson: pll: update driver for the g12a")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20201226121556.975418-3-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Martin Blumenstingl [Sat, 26 Dec 2020 12:15:54 +0000 (13:15 +0100)]
clk: meson: clk-pll: fix initializing the old rate (fallback) for a PLL
[ Upstream commit
2f290b7c67adf6459a17a4c978102af35cd62e4a ]
The "rate" parameter in meson_clk_pll_set_rate() contains the new rate.
Retrieve the old rate with clk_hw_get_rate() so we don't inifinitely try
to switch from the new rate to the same rate again.
Fixes:
7a29a869434e8b ("clk: meson: Add support for Meson clock controller")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20201226121556.975418-2-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tony Lindgren [Wed, 30 Dec 2020 10:19:11 +0000 (12:19 +0200)]
power: supply: cpcap: Add missing IRQF_ONESHOT to fix regression
[ Upstream commit
e62333e26be649bfc3c167b9f2bbca38b92332c5 ]
Commit
25d76fed7ffe ("phy: cpcap-usb: Use IRQF_ONESHOT") started causing
errors loading phy-cpcap-usb driver:
cpcap_battery cpcap_battery.0: failed to register power supply
genirq: Flags mismatch irq 211.
00002080 (se0conn) vs.
00000080 (se0conn)
cpcap-usb-phy cpcap-usb-phy.0: could not get irq se0conn: -16
Let's fix this by adding the missing IRQF_ONESHOT to also cpcap-battery
and cpcap-charger drivers.
Fixes:
25d76fed7ffe ("phy: cpcap-usb: Use IRQF_ONESHOT")
Reported-by: Merlijn Wajer <merlijn@wizzup.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Qilong [Mon, 23 Nov 2020 10:18:27 +0000 (18:18 +0800)]
HSI: Fix PM usage counter unbalance in ssi_hw_init
[ Upstream commit
aa57e77b3d28f0df07149d88c47bc0f3aa77330b ]
pm_runtime_get_sync will increment pm usage counter
even it failed. Forgetting to putting operation will
result in reference leak here. We fix it by replacing
it with pm_runtime_resume_and_get to keep usage counter
balanced.
Fixes:
b209e047bc743 ("HSI: Introduce OMAP SSI driver")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric W. Biederman [Thu, 17 Dec 2020 15:42:00 +0000 (09:42 -0600)]
capabilities: Don't allow writing ambiguous v3 file capabilities
[ Upstream commit
95ebabde382c371572297915b104e55403674e73 ]
The v3 file capabilities have a uid field that records the filesystem
uid of the root user of the user namespace the file capabilities are
valid in.
When someone is silly enough to have the same underlying uid as the
root uid of multiple nested containers a v3 filesystem capability can
be ambiguous.
In the spirit of don't do that then, forbid writing a v3 filesystem
capability if it is ambiguous.
Fixes:
8db6c34f1dbc ("Introduce v3 namespaced file capabilities")
Reviewed-by: Andrew G. Morgan <morgan@kernel.org>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nirmoy Das [Wed, 10 Feb 2021 17:11:04 +0000 (18:11 +0100)]
drm/amdgpu/display: remove hdcp_srm sysfs on device removal
[ Upstream commit
e96b1b2974989c6a25507b527843ede7594efc85 ]
Fixes:
9037246bb2da5 ("drm/amd/display: Add sysfs interface for set/get srm")
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sebastian Andrzej Siewior [Sat, 23 Jan 2021 20:10:25 +0000 (21:10 +0100)]
smp: Process pending softirqs in flush_smp_call_function_from_idle()
[ Upstream commit
66040b2d5d41f85cb1a752a75260595344c5ec3b ]
send_call_function_single_ipi() may wake an idle CPU without sending an
IPI. The woken up CPU will process the SMP-functions in
flush_smp_call_function_from_idle(). Any raised softirq from within the
SMP-function call will not be processed.
Should the CPU have no tasks assigned, then it will go back to idle with
pending softirqs and the NOHZ will rightfully complain.
Process pending softirqs on return from flush_smp_call_function_queue().
Fixes:
b2a02fc43a1f4 ("smp: Optimize send_call_function_single_ipi()")
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210123201027.3262800-2-bigeasy@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Mon, 8 Feb 2021 14:56:05 +0000 (15:56 +0100)]
irqchip/imx: IMX_INTMUX should not default to y, unconditionally
[ Upstream commit
a890caeb2ba40ca183969230e204ab144f258357 ]
Merely enabling CONFIG_COMPILE_TEST should not enable additional code.
To fix this, restrict the automatic enabling of IMX_INTMUX to ARCH_MXC,
and ask the user in case of compile-testing.
Fixes:
66968d7dfc3f5451 ("irqchip: Add COMPILE_TEST support for IMX_INTMUX")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210208145605.422943-1-geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wang ShaoBo [Sun, 15 Nov 2020 08:23:43 +0000 (16:23 +0800)]
ubifs: Fix error return code in alloc_wbufs()
[ Upstream commit
42119dbe571eb419dae99b81dd20fa42f47464e1 ]
Fix to return PTR_ERR() error code from the error handling case instead
fo 0 in function alloc_wbufs(), as done elsewhere in this function.
Fixes:
6a98bc4614de ("ubifs: Add authentication nodes to journal")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Thu, 14 Jan 2021 21:30:11 +0000 (22:30 +0100)]
ubifs: replay: Fix high stack usage, again
[ Upstream commit
410b6de702ef84fea6e7abcb6620ef8bfc112fae ]
An earlier commit moved out some functions to not be inlined by gcc, but
after some other rework to remove one of those, clang started inlining
the other one and ran into the same problem as gcc did before:
fs/ubifs/replay.c:1174:5: error: stack frame size of 1152 bytes in function 'ubifs_replay_journal' [-Werror,-Wframe-larger-than=]
Mark the function as noinline_for_stack to ensure it doesn't happen
again.
Fixes:
f80df3851246 ("ubifs: use crypto_shash_tfm_digest()")
Fixes:
eb66eff6636d ("ubifs: replay: Fix high stack usage")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dinghao Liu [Tue, 5 Jan 2021 06:03:40 +0000 (14:03 +0800)]
ubifs: Fix memleak in ubifs_init_authentication
[ Upstream commit
11b8ab3836454a2600e396f34731e491b661f9d5 ]
When crypto_shash_digestsize() fails, c->hmac_tfm
has not been freed before returning, which leads
to memleak.
Fixes:
49525e5eecca5 ("ubifs: Add helper functions for authentication support")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tom Rix [Wed, 30 Dec 2020 14:56:04 +0000 (06:56 -0800)]
jffs2: fix use after free in jffs2_sum_write_data()
[ Upstream commit
19646447ad3a680d2ab08c097585b7d96a66126b ]
clang static analysis reports this problem
fs/jffs2/summary.c:794:31: warning: Use of memory after it is freed
c->summary->sum_list_head = temp->u.next;
^~~~~~~~~~~~
In jffs2_sum_write_data(), in a loop summary data is handles a node at
a time. When it has written out the node it is removed the summary list,
and the node is deleted. In the corner case when a
JFFS2_FEATURE_RWCOMPAT_COPY is seen, a call is made to
jffs2_sum_disable_collecting(). jffs2_sum_disable_collecting() deletes
the whole list which conflicts with the loop's deleting the list by parts.
To preserve the old behavior of stopping the write midway, bail out of
the loop after disabling summary collection.
Fixes:
6171586a7ae5 ("[JFFS2] Correct handling of JFFS2_FEATURE_RWCOMPAT_COPY nodes.")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Colin Ian King [Thu, 11 Feb 2021 13:01:08 +0000 (13:01 +0000)]
fs/jfs: fix potential integer overflow on shift of a int
[ Upstream commit
4208c398aae4c2290864ba15c3dab7111f32bec1 ]
The left shift of int 32 bit integer constant 1 is evaluated using 32 bit
arithmetic and then assigned to a signed 64 bit integer. In the case where
l2nb is 32 or more this can lead to an overflow. Avoid this by shifting
the value 1LL instead.
Addresses-Coverity: ("Uninitentional integer overflow")
Fixes:
b40c2e665cd5 ("fs/jfs: TRIM support for JFS Filesystem")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sameer Pujar [Wed, 10 Feb 2021 06:43:39 +0000 (12:13 +0530)]
ASoC: simple-card-utils: Fix device module clock
[ Upstream commit
1e30f642cf2939bbdac82ea0dd3071232670b5ab ]
If "clocks = <&xxx>" is specified from the CPU or Codec component
device node, the clock is not getting enabled. Thus audio playback
or capture fails.
Fix this by populating "simple_dai->clk" field when clocks property
is specified from device node as well. Also tidy up by re-organising
conditional statements of parsing logic.
Fixes:
bb6fc620c2ed ("ASoC: simple-card-utils: add asoc_simple_card_parse_clk()")
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1612939421-19900-2-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lakshmi Ramasubramanian [Thu, 4 Feb 2021 17:49:51 +0000 (09:49 -0800)]
ima: Free IMA measurement buffer after kexec syscall
[ Upstream commit
f31e3386a4e92ba6eda7328cb508462956c94c64 ]
IMA allocates kernel virtual memory to carry forward the measurement
list, from the current kernel to the next kernel on kexec system call,
in ima_add_kexec_buffer() function. This buffer is not freed before
completing the kexec system call resulting in memory leak.
Add ima_buffer field in "struct kimage" to store the virtual address
of the buffer allocated for the IMA measurement list.
Free the memory allocated for the IMA measurement list in
kimage_file_post_load_cleanup() function.
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Suggested-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Fixes:
7b8589cc29e7 ("ima: on soft reboot, save the measurement list")
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lakshmi Ramasubramanian [Thu, 4 Feb 2021 17:49:50 +0000 (09:49 -0800)]
ima: Free IMA measurement buffer on error
[ Upstream commit
6d14c6517885fa68524238787420511b87d671df ]
IMA allocates kernel virtual memory to carry forward the measurement
list, from the current kernel to the next kernel on kexec system call,
in ima_add_kexec_buffer() function. In error code paths this memory
is not freed resulting in memory leak.
Free the memory allocated for the IMA measurement list in
the error code paths in ima_add_kexec_buffer() function.
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Suggested-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Fixes:
7b8589cc29e7 ("ima: on soft reboot, save the measurement list")
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pierre-Louis Bossart [Mon, 8 Feb 2021 23:18:53 +0000 (17:18 -0600)]
ASoC: SOF: sof-pci-dev: add missing Up-Extreme quirk
[ Upstream commit
bd8036eb15263a720b8f846861c180b27d050a09 ]
The UpExtreme board supports the community key and was missed in
previous contributions. Add it to make sure the open firmware is
picked by default without needing a symlink on the target.
Fixes:
46207ca24545 ('ASoC: SOF: pci: change the default firmware path when the community key is used')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20210208231853.58761-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chaitanya Kulkarni [Wed, 10 Feb 2021 05:47:52 +0000 (21:47 -0800)]
nvmet: set status to 0 in case for invalid nsid
[ Upstream commit
40244ad36bcfb796a6bb9e95bdcbf8ddf3134509 ]
For unallocated namespace in nvmet_execute_identify_ns() don't set the
status to NVME_SC_INVALID_NS, set it to zero.
Fixes:
bffcd507780e ("nvmet: set right status on error in id-ns handler")
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chaitanya Kulkarni [Thu, 14 Jan 2021 01:33:54 +0000 (17:33 -0800)]
nvmet: remove extra variable in identify ns
[ Upstream commit
3c7b224f1956ed232b24ed2eb2c54e4476c6acb2 ]
We remove the extra local variable struct nvmet_ns in
nvmet_execute_identify_ns() since req already has ns member that can be
reused, this also eliminates the explicit call to nvmet_put_namespace()
which is already present in the request completion path.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Keith Busch [Fri, 5 Feb 2021 19:50:02 +0000 (11:50 -0800)]
nvme-multipath: set nr_zones for zoned namespaces
[ Upstream commit
73a1a2298f3e9df24cea7a9aab412ba9470f6159 ]
The bio based drivers only require the request_queue's nr_zones is set,
so set this field in the head if the namespace path is zoned.
Fixes:
240e6ee272c07 ("nvme: support for zoned namespaces")
Reported-by: Minwoo Im <minwoo.im.dev@gmail.com>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sagi Grimberg [Fri, 5 Feb 2021 19:47:25 +0000 (11:47 -0800)]
nvmet-tcp: fix potential race of tcp socket closing accept_work
[ Upstream commit
0fbcfb089a3f2f2a731d01f0aec8f7697a849c28 ]
When we accept a TCP connection and allocate an nvmet-tcp queue we should
make sure not to fully establish it or reference it as the connection may
be already closing, which triggers queue release work, which does not
fence against queue establishment.
In order to address such a race, we make sure to check the sk_state and
contain the queue reference to be done underneath the sk_callback_lock
such that the queue release work correctly fences against it.
Fixes:
872d26a391da ("nvmet-tcp: add NVMe over TCP target driver")
Reported-by: Elad Grupi <elad.grupi@dell.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sagi Grimberg [Wed, 3 Feb 2021 23:00:01 +0000 (15:00 -0800)]
nvmet-tcp: fix receive data digest calculation for multiple h2cdata PDUs
[ Upstream commit
fda871c0ba5d2eed2cd1c881573168129da70058 ]
When a host sends multiple h2cdata PDUs for a single command, we
should verify the data digest calculation per PDU and not
per command.
Fixes:
872d26a391da ("nvmet-tcp: add NVMe over TCP target driver")
Reported-by: Narayan Ayalasomayajula <Narayan.Ayalasomayajula@wdc.com>
Tested-by: Narayan Ayalasomayajula <Narayan.Ayalasomayajula@wdc.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hao Xu [Fri, 5 Feb 2021 08:34:21 +0000 (16:34 +0800)]
io_uring: fix possible deadlock in io_uring_poll
[ Upstream commit
ed670c3f90a67d9e16ab6d8893be6f072d79cd4c ]
Abaci reported follow issue:
[ 30.615891] ======================================================
[ 30.616648] WARNING: possible circular locking dependency detected
[ 30.617423] 5.11.0-rc3-next-
20210115 #1 Not tainted
[ 30.618035] ------------------------------------------------------
[ 30.618914] a.out/1128 is trying to acquire lock:
[ 30.619520]
ffff88810b063868 (&ep->mtx){+.+.}-{3:3}, at: __ep_eventpoll_poll+0x9f/0x220
[ 30.620505]
[ 30.620505] but task is already holding lock:
[ 30.621218]
ffff88810e952be8 (&ctx->uring_lock){+.+.}-{3:3}, at: __x64_sys_io_uring_enter+0x3f0/0x5b0
[ 30.622349]
[ 30.622349] which lock already depends on the new lock.
[ 30.622349]
[ 30.623289]
[ 30.623289] the existing dependency chain (in reverse order) is:
[ 30.624243]
[ 30.624243] -> #1 (&ctx->uring_lock){+.+.}-{3:3}:
[ 30.625263] lock_acquire+0x2c7/0x390
[ 30.625868] __mutex_lock+0xae/0x9f0
[ 30.626451] io_cqring_overflow_flush.part.95+0x6d/0x70
[ 30.627278] io_uring_poll+0xcb/0xd0
[ 30.627890] ep_item_poll.isra.14+0x4e/0x90
[ 30.628531] do_epoll_ctl+0xb7e/0x1120
[ 30.629122] __x64_sys_epoll_ctl+0x70/0xb0
[ 30.629770] do_syscall_64+0x2d/0x40
[ 30.630332] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 30.631187]
[ 30.631187] -> #0 (&ep->mtx){+.+.}-{3:3}:
[ 30.631985] check_prevs_add+0x226/0xb00
[ 30.632584] __lock_acquire+0x1237/0x13a0
[ 30.633207] lock_acquire+0x2c7/0x390
[ 30.633740] __mutex_lock+0xae/0x9f0
[ 30.634258] __ep_eventpoll_poll+0x9f/0x220
[ 30.634879] __io_arm_poll_handler+0xbf/0x220
[ 30.635462] io_issue_sqe+0xa6b/0x13e0
[ 30.635982] __io_queue_sqe+0x10b/0x550
[ 30.636648] io_queue_sqe+0x235/0x470
[ 30.637281] io_submit_sqes+0xcce/0xf10
[ 30.637839] __x64_sys_io_uring_enter+0x3fb/0x5b0
[ 30.638465] do_syscall_64+0x2d/0x40
[ 30.638999] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 30.639643]
[ 30.639643] other info that might help us debug this:
[ 30.639643]
[ 30.640618] Possible unsafe locking scenario:
[ 30.640618]
[ 30.641402] CPU0 CPU1
[ 30.641938] ---- ----
[ 30.642664] lock(&ctx->uring_lock);
[ 30.643425] lock(&ep->mtx);
[ 30.644498] lock(&ctx->uring_lock);
[ 30.645668] lock(&ep->mtx);
[ 30.646321]
[ 30.646321] *** DEADLOCK ***
[ 30.646321]
[ 30.647642] 1 lock held by a.out/1128:
[ 30.648424] #0:
ffff88810e952be8 (&ctx->uring_lock){+.+.}-{3:3}, at: __x64_sys_io_uring_enter+0x3f0/0x5b0
[ 30.649954]
[ 30.649954] stack backtrace:
[ 30.650592] CPU: 1 PID: 1128 Comm: a.out Not tainted 5.11.0-rc3-next-
20210115 #1
[ 30.651554] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[ 30.652290] Call Trace:
[ 30.652688] dump_stack+0xac/0xe3
[ 30.653164] check_noncircular+0x11e/0x130
[ 30.653747] ? check_prevs_add+0x226/0xb00
[ 30.654303] check_prevs_add+0x226/0xb00
[ 30.654845] ? add_lock_to_list.constprop.49+0xac/0x1d0
[ 30.655564] __lock_acquire+0x1237/0x13a0
[ 30.656262] lock_acquire+0x2c7/0x390
[ 30.656788] ? __ep_eventpoll_poll+0x9f/0x220
[ 30.657379] ? __io_queue_proc.isra.88+0x180/0x180
[ 30.658014] __mutex_lock+0xae/0x9f0
[ 30.658524] ? __ep_eventpoll_poll+0x9f/0x220
[ 30.659112] ? mark_held_locks+0x5a/0x80
[ 30.659648] ? __ep_eventpoll_poll+0x9f/0x220
[ 30.660229] ? _raw_spin_unlock_irqrestore+0x2d/0x40
[ 30.660885] ? trace_hardirqs_on+0x46/0x110
[ 30.661471] ? __io_queue_proc.isra.88+0x180/0x180
[ 30.662102] ? __ep_eventpoll_poll+0x9f/0x220
[ 30.662696] __ep_eventpoll_poll+0x9f/0x220
[ 30.663273] ? __ep_eventpoll_poll+0x220/0x220
[ 30.663875] __io_arm_poll_handler+0xbf/0x220
[ 30.664463] io_issue_sqe+0xa6b/0x13e0
[ 30.664984] ? __lock_acquire+0x782/0x13a0
[ 30.665544] ? __io_queue_proc.isra.88+0x180/0x180
[ 30.666170] ? __io_queue_sqe+0x10b/0x550
[ 30.666725] __io_queue_sqe+0x10b/0x550
[ 30.667252] ? __fget_files+0x131/0x260
[ 30.667791] ? io_req_prep+0xd8/0x1090
[ 30.668316] ? io_queue_sqe+0x235/0x470
[ 30.668868] io_queue_sqe+0x235/0x470
[ 30.669398] io_submit_sqes+0xcce/0xf10
[ 30.669931] ? xa_load+0xe4/0x1c0
[ 30.670425] __x64_sys_io_uring_enter+0x3fb/0x5b0
[ 30.671051] ? lockdep_hardirqs_on_prepare+0xde/0x180
[ 30.671719] ? syscall_enter_from_user_mode+0x2b/0x80
[ 30.672380] do_syscall_64+0x2d/0x40
[ 30.672901] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 30.673503] RIP: 0033:0x7fd89c813239
[ 30.673962] Code: 01 00 48 81 c4 80 00 00 00 e9 f1 fe ff ff 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 3d 01 f0 ff ff 73 01 c3 48 8b 0d 27 ec 2c 00 f7 d8 64 89 01 48
[ 30.675920] RSP: 002b:
00007ffc65a7c628 EFLAGS:
00000217 ORIG_RAX:
00000000000001aa
[ 30.676791] RAX:
ffffffffffffffda RBX:
0000000000000000 RCX:
00007fd89c813239
[ 30.677594] RDX:
0000000000000000 RSI:
0000000000000014 RDI:
0000000000000003
[ 30.678678] RBP:
00007ffc65a7c720 R08:
0000000000000000 R09:
0000000003000000
[ 30.679492] R10:
0000000000000000 R11:
0000000000000217 R12:
0000000000400ff0
[ 30.680282] R13:
00007ffc65a7c840 R14:
0000000000000000 R15:
0000000000000000
This might happen if we do epoll_wait on a uring fd while reading/writing
the former epoll fd in a sqe in the former uring instance.
So let's don't flush cqring overflow list, just do a simple check.
Reported-by: Abaci <abaci@linux.alibaba.com>
Fixes:
6c503150ae33 ("io_uring: patch up IOPOLL overflow_flush sync")
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Daniele Alessandrelli [Wed, 3 Feb 2021 11:28:37 +0000 (11:28 +0000)]
crypto: ecdh_helper - Ensure 'len >= secret.len' in decode_key()
[ Upstream commit
a53ab94eb6850c3657392e2d2ce9b38c387a2633 ]
The length ('len' parameter) passed to crypto_ecdh_decode_key() is never
checked against the length encoded in the passed buffer ('buf'
parameter). This could lead to an out-of-bounds access when the passed
length is less than the encoded length.
Add a check to prevent that.
Fixes:
3c4b23901a0c7 ("crypto: ecdh - Add ECDH software support")
Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jan Henrik Weinstock [Mon, 1 Feb 2021 15:14:59 +0000 (16:14 +0100)]
hwrng: timeriomem - Fix cooldown period calculation
[ Upstream commit
e145f5565dc48ccaf4cb50b7cfc48777bed8c100 ]
Ensure cooldown period tolerance of 1% is actually accounted for.
Fixes:
ca3bff70ab32 ("hwrng: timeriomem - Improve performance...")
Signed-off-by: Jan Henrik Weinstock <jan.weinstock@rwth-aachen.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Imre Deak [Mon, 1 Feb 2021 12:01:43 +0000 (14:01 +0200)]
drm/dp_mst: Don't cache EDIDs for physical ports
[ Upstream commit
4b8878eefa0a3b65e2e016db49014ea66fb9fd45 ]
Caching EDIDs for physical ports prevents updating the EDID if a port
gets reconnected via a Connection Status Notification message, fix this.
Fixes:
db1a07956968 ("drm/dp_mst: Handle SST-only branch device case")
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210201120145.350258-2-imre.deak@intel.com
(cherry picked from commit
468091531c2e5c49f55d8c6f1d036ce997d24e13)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qinglang Miao [Fri, 27 Nov 2020 09:44:38 +0000 (17:44 +0800)]
drm/lima: fix reference leak in lima_pm_busy
[ Upstream commit
de4248b744e8394f239c0dd0af34088399d27d94 ]
pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to putting operation will result in a
reference leak here.
A new function pm_runtime_resume_and_get is introduced in
[0] to keep usage counter balanced. So We fix the reference
leak by replacing it with new function.
[0] commit
dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
Fixes:
50de2e9ebbc0 ("drm/lima: enable runtime pm")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201127094438.121003-1-miaoqinglang@huawei.com
(cherry picked from commit
de499781c97d96703af8a32d2b5e37fdb5b51568)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>