dt-bindings: display: convert seiko,43wvf1g to DT Schema

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Marco Franchi <marco.franchi@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Marco Franchi <marco.franchi@nxp.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-34-sam@ravnborg.org

dt-bindings: display: convert sharp,lq150x1lg11 to DT Schema

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Peter Rosin <peda@axentia.se>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-33-sam@ravnborg.org

dt-bindings: display: convert sharp,ls037v7dw01 to DT Schema

v2:
  - Add min/maxItems to mode-gpios (Rob)
  - Fix bug in description, mode is up to three gpios (Rob)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-32-sam@ravnborg.org

dt-bindings: display: convert sharp,ls043t1le01 to DT Schema

The txt binding specified the property "power-supply".
But the example and the actual implementation in the linux-kernel
uses "avdd-supply".
So the binding is adjusted to use avdd-supply as this seems
to be the correct choice.
There are no DT files in the linux kernel to check.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Werner Johansson <werner.johansson@sonymobile.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-30-sam@ravnborg.org

dt-bindings: display: drop unused simple-panel.txt

There are no more references to simple-panel.txt.
Delete it.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-29-sam@ravnborg.org

dt-bindings: display: convert sitronix,st7789v to DT Schema

v2:
    - dropped use of spi-slave.yaml (Maxime)
    - added unevaluatedProperties (Maxime)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-28-sam@ravnborg.org

dt-bindings: display: convert sony,acx565akm to DT Schema

v2:
  - drop use of spi-slave.yaml (Maxime)
  - add unevaluatedProperties (Maxime)
  - rename node in example to panel (Rob)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-27-sam@ravnborg.org

dt-bindings: display: convert startek,startek-kd050c to DT Schema

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Marek Belisko <marek@goldelico.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-26-sam@ravnborg.org

dt-bindings: display: convert toppoly panels to DT Schema

v2:
  - dropped use of spi-slave.yaml (Maxime)
  - added unevaluatedProperties (Maxime)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Marek Belisko <marek@goldelico.com>
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-25-sam@ravnborg.org

dt-bindings: display: convert samsung,ld9040 to DT Schema

v2:
  - drop use of spi-slave.yaml (Maxime)
  - added unevaluatedProperties (Maxime)
  - added type to width/height properties (Rob)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-23-sam@ravnborg.org

dt-bindings: display: convert samsung,s6d16d0 to DT Schema

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-22-sam@ravnborg.org

dt-bindings: display: convert samsung AMOLED to DT Schema

For samsung there was two AMOLED panels with the same
description.
Collect them in one binding file.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-21-sam@ravnborg.org

dt-bindings: display: convert raydium,rm67191 to DT Schema

v2:
  - Fix entry in MAINTAINERS
  - Add reg number to node name (Rob)
  - Fix stray spaces

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Robert Chiras <robert.chiras@nxp.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-19-sam@ravnborg.org

dt-bindings: display: convert osddisplays,osd101t2587-53ts to DT Schema

osddisplays,osd101t2587-53ts is compatible with panel-simple-dsi binding,
so list the compatible in the panel-simple-dsi binding file.

v2:
  - It is a DSI panel, move to -dsi binding (Tomi)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-18-sam@ravnborg.org

dt-bindings: display: convert lg,lg4573 to DT Schema

v2:
  - Dropped spi-slave (Maxime)
  - Added unevaluatedProperties (Maxime)
  - Deleted needless compatible from example (Rob)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Heiko Schocher <hs@denx.de>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-17-sam@ravnborg.org

dt-bindings: display: convert simple lg panels to DT Schema

Add the lg panels that matches the panel-simple binding to
panel-simple.yaml

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Brian Masney <masneyb@onstation.org>
Cc: Alexandre Courbot <acourbot@chromium.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-16-sam@ravnborg.org

dt-bindings: display: convert kingdisplay,kd097d04 to DT Schema

kingdisplay,kd097d04 matches the panel-simple-dsi binding.
The only difference is that enable-gpios is now an optional
property.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Nickey Yang <nickey.yang@rock-chips.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-15-sam@ravnborg.org

dt-bindings: display: convert kingdisplay,kd035g6-54nt to DT Schema

v2:
  - Drop use of spi-slave.yaml (Maxime)
  - Introduce unevaluatedProperties (Maxime)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-14-sam@ravnborg.org

dt-bindings: display: convert jdi,lt070me05000 to DT Schema

v2:
  - drop address in dsi node in example (Rob)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Vinay Simha BN <simhavcs@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Vinay Simha BN <simhavcs@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-13-sam@ravnborg.org

dt-bindings: display: convert innolux,p120zdg-bf1 to DT Schema

v3:
  - Fix stray spaces

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Sandeep Panda <spanda@codeaurora.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-12-sam@ravnborg.org

dt-bindings: display: convert innolux,p097pfg to DT Schema

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Lin Huang <hl@rock-chips.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-11-sam@ravnborg.org

dt-bindings: display: convert ilitek,ili9881c to DT Schema

Updating this binding identified an issue in the example in
the allwinner,sun6i-a31-mipi-dsi binding.
Fix the example so no new warnings are introduced.

v2:
  - fix example in allwinner,sun6i-a31-mipi-dsi (Rob)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-9-sam@ravnborg.org

dt-bindings: display: convert ilitek,ili9322 to DT Schema

The .txt binding explains:

"
    The following optional properties only apply to
    RGB and YUV input modes and
    can be omitted for BT.656 input modes:
"

This constraint is not implmented in the DT Schema.

The original binding from the .txt file referenced
properties that is included in panel-timing.yaml.

The properties in question are:
  - pixelclk-active
  - de-active
  - hsync-active
  - vsync-active

These properties was dropped in the conversion as they are not relevant.

v2:
  - drop properties from panel-timing (Linus)
  - drop use of spi-slave.yaml (Maxime)
  - introduce unevaluatedProperties (Maxime)
  - dropped unused properties (Linus)
  - delete stray spaces

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-8-sam@ravnborg.org

dt-bindings: display: convert boe,himax8279d to DT Schema

v2:
  - Fix entry in MAINTAINERS

v3:
  - Fix panel@0 in example (Rob)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Jerry Han <hanxu5@huaqin.corp-partner.google.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-7-sam@ravnborg.org

dt-bindings: display: convert arm,versatile-tft-panel to DT Schema

v2:
  - Fix entry in MAINTAINERS

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-6-sam@ravnborg.org

dt-bindings: display: convert samsung,s6e63m0 to DT Schema

The binding for this panel is a SPI slave.

v2:
  - Drop use of spi-slave (Maxime)
  - Introude unevaluatedProperties (Maxime)
  - Drop reg entry in example (Rob)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Jonathan Bakker <xc-racer2@live.ca>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-5-sam@ravnborg.org

dt-bindings: display: add te-gpios to panel-common

Several bindings specifies a "te-gpios" for tearing effect signal.
Add this to panel-common so we have a shared definition.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-4-sam@ravnborg.org

dt-bindings: display: look for dsi* nodes in dsi-controller

Rob wrote:

    Uhhh, it's looking for dsi-controller(@.*)? which is not the common
    case found in dts files. We should fix that to dsi(@.*)?.

See: https://lore.kernel.org/dri-devel/20200319032222.GK29911@bogus/

Fix it.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-3-sam@ravnborg.org

drm/rockchip: fix spelling mistake "modifer" -> "modifier"

There is a spelling mistake in a DRM_DEBUG_KMS debug message. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415083420.366279-1-colin.king@canonical.com

drm/device: Deprecate dev_private harder

We've had lots of conversions to embeddeding, but didn't stop using
->dev_private. Which defeats the point of this.

Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200403135828.2542770-4-daniel.vetter@ffwll.ch

dt-bindings: display: allow port and ports in panel-lvds

Both port and ports names may be used in a panel-lvds binding
  port - for a single port
  ports - if there is more than one port in sub-nodes

Fixes the following warning:
advantech,idk-2121wr.example.dt.yaml: panel-lvds: 'port' is a required property

advantech,idk-2121wr.yaml needs several ports, so uses a ports node.

v2:
  - Use oneOf - makes the logic more obvious (Rob)
  - Added Fixes tag
  - Added port: true, ports:true

v3:
  - Indent port/ports in required two spaces (Rob)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Fixes: 8efef33eff50 ("dt-bindings: display: Add idk-2121wr binding")
Cc: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Cc: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200412132139.11418-2-sam@ravnborg.org

drm: bridge: adv7511: Extend list of audio sample rates

ADV7511 support sample rates up to 192kHz. CTS and N parameters should
be computed accordingly so this commit extend the list up to maximum
supported sample rate.

Signed-off-by: Bogdan Togorean <bogdan.togorean@analog.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200413113513.86091-2-bogdan.togorean@analog.com

drm: bridge: adv7511: Enable SPDIF DAI

ADV7511 support I2S or SPDIF as audio input interfaces. This commit
enable support for SPDIF.

Signed-off-by: Bogdan Togorean <bogdan.togorean@analog.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200413113513.86091-1-bogdan.togorean@analog.com

drm: kirin: Revert change to add register connect helper functions

Daniel noted[1] that commit d606dc9a6323 ("drm: kirin: Add
register connect helper functions in drm init") was unnecessary
and incorrect, as drm_dev_register does register connectors for
us.

Thus, this patch reverts the change as suggested by Daniel.

[1]: https://lore.kernel.org/lkml/CAKMK7uHr5U-pPsxdQ4MpfK5v8iLjphDFug_3VTiUAf06nhS=yQ@mail.gmail.com/

Cc: Xu YiPing <xuyiping@hisilicon.com>
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <xinliang.liu@linaro.org>
Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Cc: Chen Feng <puck.chen@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Xinliang Liu <xinliang.liu@linaro.org>
Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200409004306.18541-1-john.stultz@linaro.org

fbdev: mx3fb: const pointer to ipu_di_signal_cfg

Laurent Pinchart <laurent.pinchart@ideasonboard.com> and
Jani Nikula <jani.nikula@intel.com> both
suggested to make the pointer to struct ipu_di_signal_cfg const.

Fix this.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Fixes: 3f6c93ec9254 ("fbdev: mx3fb: avoid warning about psABI change")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Enrico Weigelt <info@metux.net>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: linux-fbdev@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200408182926.GA21997@ravnborg.org

dma-buf: Exercise dma-fence-chain under selftests

A few very simple testcases to exercise the dma-fence-chain API.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200409110101.18400-3-chris@chris-wilson.co.uk

dma-buf: Report signaled links inside dma-fence-chain

Whenever we walk along the dma-fence-chain, we prune signaled links to
keep the chain nice and tidy. This leads to situations where we can
prune a link and report the earlier fence as the target seqno --
violating our own consistency checks that the seqno is not more advanced
than the last element in a dma-fence-chain.

Report a NULL fence and success if the seqno has already been signaled.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Reviewed-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200409110101.18400-2-chris@chris-wilson.co.uk

dma-buf: Prettify typecasts for dma-fence-chain

Inside dma-fence-chain, we use a cmpxchg on an RCU-protected pointer. To
avoid the sparse warning for using the RCU pointer directly, we have to
cast away the __rcu annotation. However, we don't need to use void*
everywhere and can stick to the dma_fence*.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200409110101.18400-1-chris@chris-wilson.co.uk

drm/dp_mst: Print errors on ACT timeouts

Although it's not unexpected for drm_dp_check_act_status() to fail due
to DPCD read failures (as the hub may have just been unplugged
suddenly), timeouts are a bit more worrying as they either mean we need
a longer timeout value, or we aren't setting up payload allocations
properly. So, let's start printing errors on timeouts.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Sean Paul <sean@poorly.run>
Reviewed-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406221253.1307209-5-lyude@redhat.com

drm/dp_mst: Increase ACT retry timeout to 3s

Currently we only poll for an ACT up to 30 times, with a busy-wait delay
of 100µs between each attempt - giving us a timeout of 2900µs. While
this might seem sensible, it would appear that in certain scenarios it
can take dramatically longer then that for us to receive an ACT. On one
of the EVGA MST hubs that I have available, I observed said hub
sometimes taking longer then a second before signalling the ACT. These
delays mostly seem to occur when previous sideband messages we've sent
are NAKd by the hub, however it wouldn't be particularly surprising if
it's possible to reproduce times like this simply by introducing branch
devices with large LCTs since payload allocations have to take effect on
every downstream device up to the payload's target.

So, instead of just retrying 30 times we poll for the ACT for up to 3ms,
and additionally use usleep_range() to avoid a very long and rude
busy-wait. Note that the previous retry count of 30 appears to have been
arbitrarily chosen, as I can't find any mention of a recommended timeout
or retry count for ACTs in the DisplayPort 2.0 specification. This also
goes for the range we were previously using for udelay(), although I
suspect that was just copied from the recommended delay for link
training on SST devices.

Changes since v1:
* Use readx_poll_timeout() instead of open-coding timeout loop - Sean
  Paul
Changes since v2:
* Increase poll interval to 200us - Sean Paul
* Print status in hex when we timeout waiting for ACT - Sean Paul

Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: ad7f8a1f9ced ("drm/helper: add Displayport multi-stream helper (v0.6)")
Cc: Sean Paul <sean@poorly.run>
Cc: <stable@vger.kernel.org> # v3.17+
Reviewed-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406221253.1307209-4-lyude@redhat.com

drm/dp_mst: Reformat drm_dp_check_act_status() a bit

Just add a bit more line wrapping, get rid of some extraneous
whitespace, remove an unneeded goto label, and move around some variable
declarations. No functional changes here.

Signed-off-by: Lyude Paul <lyude@redhat.com>
[this isn't a fix, but it's needed for the fix that comes after this]
Fixes: ad7f8a1f9ced ("drm/helper: add Displayport multi-stream helper (v0.6)")
Cc: Sean Paul <sean@poorly.run>
Cc: <stable@vger.kernel.org> # v3.17+
Reviewed-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406221253.1307209-3-lyude@redhat.com

drm/dp_mst: Improve kdocs for drm_dp_check_act_status()

No functional changes.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Sean Paul <sean@poorly.run>
Reviewed-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406221253.1307209-2-lyude@redhat.com

drm/bridge: Add NWL MIPI DSI host controller support

This adds initial support for the NWL MIPI DSI Host controller found on
i.MX8 SoCs.

It adds support for the i.MX8MQ but the same IP can be found on
e.g. the i.MX8QXP.

It has been tested on the Librem 5 devkit using mxsfb.

Signed-off-by: Guido Günther <agx@sigxcpu.org>
Co-developed-by: Robert Chiras <robert.chiras@nxp.com>
Signed-off-by: Robert Chiras <robert.chiras@nxp.com>
Tested-by: Robert Chiras <robert.chiras@nxp.com>
Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1cf5750f734e33d005564cd89c576eaf3c1c192b.1586427783.git.agx@sigxcpu.org

dt-bindings: display/bridge: Add binding for NWL mipi dsi host controller

The Northwest Logic MIPI DSI IP core can be found in NXPs i.MX8 SoCs.

Signed-off-by: Guido Günther <agx@sigxcpu.org>
Tested-by: Robert Chiras <robert.chiras@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/147ffc1e4dee3a623e5dca25d84565d386a34112.1586427783.git.agx@sigxcpu.org

drm/vram-helpers: Merge code into a single file

Most of the documentation was in an otherwise empty file, which was
probably just left from a previous clean-up effort. So move code and
documentation into a single file.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200331081238.24749-1-tzimmermann@suse.de

drm/vram-helpers: Set plane fence for display update

Calling the VRAM helper's prepare_fb() helper now sets the plane's
fence object. This will be useful for PRIME support. VRAM helpers
don't support buffer sharing ATM, so for now there are no drivers
requiring this change.

v2:
* removed a TODO comment about buffer synchronization

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200331092740.29282-1-tzimmermann@suse.de

drm: Don't return 0 from a void drm_fbdev_generic_setup

drm_fbdev_generic_setup() was changed to be a void return, but the stub
was left returning 0.

./include/drm/drm_fb_helper.h: In function ‘drm_fbdev_generic_setup’:
./include/drm/drm_fb_helper.h:450:9: warning: ‘return’ with a value, in function returning void [-Wreturn-type]
./include/drm/drm_fb_helper.h:448:1: note: declared here
  448 | drm_fbdev_generic_setup(struct drm_device *dev, unsigned int preferred_bpp)

Fixes: 1aed9509b29a ("drm/fb-helper: Remove return value from drm_fbdev_generic_setup()")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408212407.4309-1-chris@chris-wilson.co.uk

drm/panel: support for boe,tv105wum-nw0 dsi video mode panel

Add entries for BOE TV105WUM-NW0 10.5" WUXGA TFT LCD panel.

Signed-off-by: David Lu <david.lu@bitland.com.cn>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200324075734.1802-1-david.lu@bitland.com.cn

dt-bindings: boe, tv101wum-n16: Add compatible for boe tv105wum-nw0.

Add bindings documentation for BOE TV105WUM-NW0 10.5" WUXGA TFT LCD
panel.

Signed-off-by: David Lu <david.lu@bitland.com.cn>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200324094525.4758-1-david.lu@bitland.com.cn

fbdev: mx3fb: avoid warning about psABI change

The arm64 gcc-9 release warns about a change in the calling
conventions:

drivers/video/fbdev/mx3fb.c: In function 'sdc_init_panel':
drivers/video/fbdev/mx3fb.c:506:12: note: parameter passing for argument of type 'struct ipu_di_signal_cfg' changed in GCC 9.1
  506 | static int sdc_init_panel(struct mx3fb_data *mx3fb, enum ipu_panel panel,
      |            ^~~~~~~~~~~~~~
drivers/video/fbdev/mx3fb.c: In function '__set_par':
drivers/video/fbdev/mx3fb.c:848:7: note: parameter passing for argument of type 'struct ipu_di_signal_cfg' changed in GCC 9.1

Change the file to just pass the struct by reference, which is
unambiguous and avoids the warning.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408162551.3928330-1-arnd@arndb.de

drm/fb-helper: Remove return value from drm_fbdev_generic_setup()

Generic fbdev emulation is a DRM client. Drivers should invoke the
setup function, but not depend on its success. Hence remove the return
value.

v3:
* document stricter requirements for call sequence
v2:
* warn if fbdev device has not been registered yet
* document the new behavior
* convert the existing warning to the new dev_ interface

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408082641.590-11-tzimmermann@suse.de

drm/vboxvideo: Set up fbdev after registering device; remove error checks

Generic fbdev support is a DRM client. Set it up after registering
the new DRM device. Remove the error checks as the driver's probe
function should not depend on a DRM client's state.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408082641.590-10-tzimmermann@suse.de

drm/udl: Remove error check from fbdev setup

Remove the error check from the fbdev setup function. The driver's
probe function should not depend on a DRM client's state.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408082641.590-9-tzimmermann@suse.de

drm/tilcdc: Set up fbdev after fully registering device

Generic fbdev support is a DRM client. Set it up after fully registering
the new DRM device.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408082641.590-8-tzimmermann@suse.de

drm/mgag200: Set up fbdev after registering device; remove error checks

Generic fbdev support is a DRM client. Set it up after registering
the new DRM device. Remove the error checks as the driver's probe
function should not depend on a DRM client's state.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408082641.590-7-tzimmermann@suse.de

drm/mediatek: Remove error check from fbdev setup

Remove the error check from the fbdev setup function. The function
will print a warning.

v2:
* fix subject line

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408082641.590-6-tzimmermann@suse.de

drm/ingenic: Remove error check from fbdev setup

Remove the error check from the fbdev setup function. The function
will print a warning.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408082641.590-5-tzimmermann@suse.de

drm/kirin: Set up fbdev after fully registering device

Generic fbdev support is a DRM client. Set it up after fully registering
the new DRM device.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408082641.590-4-tzimmermann@suse.de

drm/hibmc: Remove error check from fbdev setup

Generic fbdev support is a DRM client. Remove the error check as the
driver's probe function should not depend on a DRM client's state.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408082641.590-3-tzimmermann@suse.de

drm/ast: Set up fbdev after registering device; remove error checks

Generic fbdev support is a DRM client. Set it up after registering
the new DRM device. Remove the error checks as the driver's probe
function should not depend on a DRM client's state.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408082641.590-2-tzimmermann@suse.de

drm/ttm: clean up ttm_trace_dma_map/ttm_trace_dma_unmap (v2)

ttm_trace_dma_map/ttm_trace_dma_unmap is never used anymore.

v2: remove the file completely

Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/360432/

drm/panel: nt39016: Add support for 50 Hz refresh rate

By changing the pixel clock and the length of the back porch, it is
possible to obtain a perfect 50 Hz refresh rate.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408095830.8131-2-paul@crapouillou.net
Acked-by: Sam Ravnborg <sam@ravnborg.org>

drm/panel: nt39016: Add support for multiple modes

Add support for multiple drm_display_mode entries. This will allow to
add a 50 Hz mode later.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408095830.8131-1-paul@crapouillou.net
Acked-by: Sam Ravnborg <sam@ravnborg.org>

video: fbdev: mb862xx: remove set but not used variable 'mdr'

Fix the following gcc warning:

drivers/video/fbdev/mb862xx/mb862xxfb_accel.c:187:6: warning: variable
‘mdr’ set but not used [-Wunused-but-set-variable]
  int mdr;
      ^~~

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200403022553.33320-1-yanaijie@huawei.com

video: fbdev: matroxfb: remove dead code and set but not used variable

Fix the following gcc warning:

drivers/video/fbdev/matrox/g450_pll.c:336:15: warning: variable
‘pixel_vco’ set but not used [-Wunused-but-set-variable]
  unsigned int pixel_vco;
               ^~~~~~~~~

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200403021609.20968-1-yanaijie@huawei.com

drm/panel: add panel driver for Leadtek LTK050H3146W

The LTK050H3146W is 5.0" 720x1280 DSI display. There are two variants
with essentially the same name, LTK050H3146W and LTK050H3146W-A2.

They differ in their init sequence and mode details.

changes in v2:
- add display variants
changes in v3:
- fixed indentation and artifacts found by Sam

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408085317.2624599-2-heiko@sntech.de

dt-bindings: display: panel: Add binding document for Leadtek LTK050H3146W

The LTK050H3146W is a 5.0" 720x1280 DSI display.

changes in v2:
- add display variants

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200407232351.2547750-1-heiko@sntech.de

dt-bindings: display: rockchip-vop: add additional properties

In the old txt situation we add/describe only properties that are used
by the driver/hardware itself. With yaml it also filters things in a
node that are used by other drivers like 'assigned-clocks' and
'assigned-clock-rates' for rk3399 and 'power-domains' for most
Rockchip Socs in 'vop' nodes, so add them to 'rockchip-vop.yaml'.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200403142235.8870-2-jbx6244@gmail.com

dt-bindings: display: convert rockchip vop bindings to yaml

Current dts files with 'vop' nodes are manually verified.
In order to automate this process rockchip-vop.txt
has to be converted to yaml.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200403142235.8870-1-jbx6244@gmail.com

MAINTAINERS: Update feiyang,st7701 panel bindings converted as YAML

The feiyang,fy07024di26a30d.txt and sitronix,st7701.txt has been
converted to YAML schemas, update MAINTAINERS to match them again.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200403142453.25307-3-jagan@amarulasolutions.com

dt-bindings: display: panel: Convert sitronix,st7701 to DT schema

Convert the sitronix,st7701 panel bindings to DT schema.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200403142453.25307-2-jagan@amarulasolutions.com

dt-bindings: display: panel: Convert feiyang,fy07024di26a30d to DT schema

Convert the feiyang,fy07024di26a30d panel bindings to DT schema.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200403142453.25307-1-jagan@amarulasolutions.com

video: Add missing annotation for cyber2000fb_enable_ddc() and cyber2000fb_disable_ddc()

Sparse reports warnings at cyber2000fb_enable_ddc()
and cyber2000fb_disable_ddc()

warning: context imbalance in cyber2000fb_enable_ddc()
- wrong count at exit

warning: context imbalance in cyber2000fb_disable_ddc()
- unexpected unlock

The root cause is the missing annotation at cyber2000fb_enable_ddc()
and cyber2000fb_disable_ddc()

Add the missing __acquires(&cfb->reg_b0_lock) annotation
Add the missing __releases(&cfb->reg_b0_lock) annotation

Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200403160505.2832-3-jbi.octave@gmail.com

drm/ingenic: Delete an error message in ingenic_drm_probe()

The function “platform_get_irq” can log an error already.
Thus omit a redundant message for the exception handling in the
calling function.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/e03e7106-0f22-99c4-ad21-b288e8990b5a@web.de

drm/dp_mst: Remove drm_dp_mst_has_audio()

Drive-by fix I noticed the other day - drm_dp_mst_has_audio() only ever
made sense back when we still had to validate ports before accessing
them in order to (attempt to) avoid NULL dereferences. Since we have
proper reference counting that guarantees we always can safely access
the MST port, there's no use in keeping this function around as all it
does is validate the port pointer before checking the audio status.

Note - drm_dp_mst_port->has_audio is technically protected by
drm_device->mode_config.connection_mutex, since it's only ever updated
from drm_dp_mst_get_edid(). Additionally, we change the declaration for
port in struct intel_connector to be properly typed, so we can directly
access it.

Changes since v1:
* Change type of intel_connector->port in a separate patch - Sean Paul

Cc: "Lee, Shawn C" <shawn.c.lee@intel.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406200646.1263435-2-lyude@redhat.com

drm/i915/dp_mst: Cast intel_connector->port as drm_dp_mst_port

The only reason for having this cast as void * before was because we
originally needed to use drm_dp_mst_get_port_validated() and friends in
order to (attempt to) safely access MST ports. However, we've since
improved how reference counting works with ports and mstbs such that we
can now rely on drm_dp_mst_port structs remaining in memory for as long
as the driver needs. This means we don't really need to cast this as
void* anymore, and can just access the struct directly.

We'll also need this for the next commit, so that we can remove
drm_dp_mst_port_has_audio().

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406200646.1263435-1-lyude@redhat.com

video: fbdev: don't print error message on platform_get_irq() failure

The platform_get_irq() can print error message, so remove the redundant
dev_err() here.

Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406053450.8380-1-tangbin@cmss.chinamobile.com

drm/vblank: Add intro to documentation

Lyude Paul wrote a very good intro to vblank here:
https://lore.kernel.org/dri-devel/faf63d8a9ed23c16af69762f59d0dca6b2bf085f.camel@redhat.com/T/#mce6480be738160e9d07c5d023e88fd78d7a06d27

Add this to the intro chapter in drm_vblank.c so others
can benefit from it too.

v2:
  - Reworded to improve readability (Thomas)

v3:
  - Added nice ascii drawing from Lyude (Lyude)
  - Added referende to high-precision timestamp (Daniel)
  - Improved grammar (Thomas)
  - Combined it all and made kernel-doc happy
  - Dropped any a-b, r-b do to the amount of changes

v4:
  - Add intro to vblank interrupt (Liviu)
  - Add historical reference for blanking (Alex)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Co-developed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406194746.26433-2-sam@ravnborg.org

drm/writeback: wire drm_writeback.h to kernel-doc

drm_writeback.h included a lot of nice kernel-doc comments.
Wire it up so the header file is included in the kernel-doc
generated documentation.

Added a few simple comments to the two structs so they
get picked up by kernel-doc.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406194746.26433-4-sam@ravnborg.org

drm: writeback: document callbacks

Document the callbacks:
    drm_connector_helper_funcs.prepare_writeback_job
    drm_connector_helper_funcs.cleanup_writeback_job

The documentation was pulled from the changelong introducing the
callbacks, originally written by Laurent.

Adding the missing documentation fixes the following warnings:
drm_modeset_helper_vtables.h:1052: warning: Function parameter or member 'prepare_writeback_job' not described in 'drm_connector_helper_funcs'
drm_modeset_helper_vtables.h:1052: warning: Function parameter or member 'cleanup_writeback_job' not described in 'drm_connector_helper_funcs'

v2:
  - Fix formatting (Daniel)
  - Drop changelog text and add reference (Daniel)
  - Improve grammar. and use "operation" (Laurent)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406194746.26433-3-sam@ravnborg.org

drm/dp_mst: Don't drop NAKs for down responses

It looks like that when we introduced the ability to handle multiple
down requests at once, we accidentally started dropping NAK replies -
causing sideband messages which got NAK'd to seemingly timeout and cause
all sorts of weirdness.

So, fix this by making sure we don't return from
drm_dp_mst_handle_down_rep() early, but instead treat NAKs like any
other message.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: fbc821c4a506 ("drm/mst: Support simultaneous down replies")
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Wayne Lin <waynelin@amd.com>
Cc: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200403200325.885628-1-lyude@redhat.com
Reviewed-by: Sean Paul <sean@poorly.run>

drm/dp_mst: Fix NULL deref in drm_dp_get_one_sb_msg()

While we don't need this function to store an mstb anywhere for UP
requests since we process them asynchronously, we do need to make sure
that we don't try to write to **mstb for UP requests otherwise we'll
cause a NULL pointer deref:

    RIP: 0010:drm_dp_get_one_sb_msg+0x4b/0x460 [drm_kms_helper]
    Call Trace:
     ? vprintk_emit+0x16a/0x230
     ? drm_dp_mst_hpd_irq+0x133/0x1010 [drm_kms_helper]
     drm_dp_mst_hpd_irq+0x133/0x1010 [drm_kms_helper]
     ? __drm_dbg+0x87/0x90 [drm]
     ? intel_dp_hpd_pulse+0x24b/0x400 [i915]
     intel_dp_hpd_pulse+0x24b/0x400 [i915]
     i915_digport_work_func+0xd6/0x160 [i915]
     process_one_work+0x1a9/0x370
     worker_thread+0x4d/0x3a0
     kthread+0xf9/0x130
     ? process_one_work+0x370/0x370
     ? kthread_park+0x90/0x90
     ret_from_fork+0x35/0x40

So, fix this.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: fbc821c4a506 ("drm/mst: Support simultaneous down replies")
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Wayne Lin <waynelin@amd.com>
Cc: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406193352.1245985-1-lyude@redhat.com
Reviewed-by: Sean Paul <sean@poorly.run>

drm/sun4i: tcon: Delete an error message in sun4i_tcon_init_irq()

The function “platform_get_irq” can log an error already.
Thus omit a redundant message for the exception handling in the
calling function.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/5a6cf5a7-3f27-5425-4d6a-550a17bc51e3@web.de

drm/bridge: fix kernel-doc warning in panel.c

Add missing documentation to fix following warning:
panel.c:303: warning: Function parameter or member 'bridge' not described in 'drm_panel_bridge_connector'

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Mihail Atanassov <Mihail.Atanassov@arm.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200328132025.19910-7-sam@ravnborg.org

drm/sched: fix kernel-doc in gpu_scheduler.h

Fix following warning:
gpu_scheduler.h:103: warning: Function parameter or member 'priority' not described in 'drm_sched_entity'

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Nirmoy Das <nirmoy.das@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200328132025.19910-4-sam@ravnborg.org

drm/dp_mst: Remove drm_dp_mst_topology_cbs.destroy_connector

Now that we've removed the last user of this callback, get rid of it and
drm_dp_destroy_connector().

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200331205740.135525-5-lyude@redhat.com
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>

drm/amd/amdgpu_dm/mst: Stop printing extra messages in dm_dp_add_mst_connector()

You can already trace the creation and destruction of connectors using
DRM, and we definitely don't need to be printing info messages on
connector hotplugs as well. So, get rid of these.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200331205740.135525-4-lyude@redhat.com
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>

drm/amd/amdgpu_dm/mst: Remove ->destroy_connector() callback

Pankaj Bharadiya started cleaning up the MST connector callbacks a while
ago, as I pointed out that they are the same across every driver and
don't serve much purpose. There was one callback that was left over
though from amdgpu, that we delayed removing due to not being completely
sure as to whether or not it was needed.

So, I've read through said callback and can confirm it's not at all
needed. Pretty much all of the work that is done in
dm_dp_destroy_mst_connector() can be done in
dm_dp_mst_connector_destroy(). Additionally, I've removed some bits that
didn't actually do anything:

* Removed DRM_INFO message we were printing, this shouldn't be info
  level and there's more appropriate drm debugging flags that should be
  used instead
* Removed amdgpu_dm_update_freesync_caps() - reading into this function,
  it doesn't actually do anything important and I'm not sure why it was
  ever being called here
* Stop clearing aconnector->dc_sink - this also doesn't do anything
* Stop clearing link settings in dc_link - this also doesn't do anything
* Also, use shorter variable

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200331205740.135525-3-lyude@redhat.com
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>

drm/amd/amdgpu_dm/mst: Remove unneeded edid assignment when destroying connectors

Doesn't do anything, noticed this while cleaning up some unrelated
stuff.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200331205740.135525-2-lyude@redhat.com
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>

drm/panel-leadtek-ltk500hd1829: Fix dotclock

The currently listed dotclock disagrees with the currently
listed vrefresh rate. Change the dotclock to match the vrefresh.

Someone tell me which (if either) of the dotclock or vreresh is
correct?

Cc: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200302203452.17977-6-ville.syrjala@linux.intel.com
Tested-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Acked-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>

drm: delete drm_pci.h

It's empty!

After more than 20 years of OS abstraction layer for pci devices, it's
kinda gone now.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200403110610.2344842-2-daniel.vetter@ffwll.ch

drm/pci: Move drm_pci_alloc/free under CONFIG_DRM_LEGACY

All other users have been removed, yay!

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
[fix checkpatch warning]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200403110610.2344842-1-daniel.vetter@ffwll.ch

drm/virtio: make virtio_gpu_object_attach void

It always returns zero.

Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20200401223039.2860-4-gurchetansingh@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/virtio: delete notify in virtio_gpu_object_create

For 3D buffers, virtio_gpu_gem_object_open notifies.
We can have the same behavior for dumb buffer.

v2: virtio_gpu_gem_object_open always notifies
v3: avoid boolean variable

Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200401223039.2860-3-gurchetansingh@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/virtio: delete notify after virtio_gpu_cmd_context_create

The first 3D ioctl will take care of notification.

Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200401223039.2860-2-gurchetansingh@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/virtio: random virtgpu_drv.h cleanups

- Static-ify virtio_gpu_gem_create
- Delete unused prototypes
- Point to current implementation files

Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200401223039.2860-1-gurchetansingh@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/hisilicon: Enforce 128-byte stride alignment to fix the hardware limitation

because the hardware limitation,The initial color depth must set to 32bpp
and must set the FB Offset of the display hardware to 128Byte alignment,
which is used to solve the display problem at 800x600 and 1440x900
resolution under 16bpp.

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Gong junjie <gongjunjie2@huawei.com>
Acked-by: Xinliang Liu <xinliang.liu@linaro.org>
Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1583466184-7060-4-git-send-email-tiantao6@hisilicon.com

drm/zte: Use simple encoder

The zte driver uses empty implementations for its encoders. Replace
the code with the generic simple encoder.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305155950.2705-23-tzimmermann@suse.de

drm/vkms: Use simple encoder

The vkms driver uses an empty implementation for its encoder. Replace
the code with the generic simple encoder.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305155950.2705-21-tzimmermann@suse.de

drm/virtgpu: Use simple encoder

The virtgpu driver uses an empty implementation for its encoder. Replace
the code with the generic simple encoder.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305155950.2705-20-tzimmermann@suse.de