media: rkvdec: h264: Fix dpb_valid implementation

[ Upstream commit 7ab889f09dfa70e8097ec1b9186fd228124112cb ]

The ref builder only provided references that are marked as valid in the
dpb. Thus the current implementation of dpb_valid would always set the
flag to 1. This is not representing missing frames (this is called
'non-existing' pictures in the spec). In some context, these non-existing
pictures still need to occupy a slot in the reference list according to
the spec.

Fixes: cd33c830448ba ("media: rkvdec: Add the rkvdec driver")
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: staging: media: rkvdec: Make use of the helper function devm_platform_ioremap_resource()

[ Upstream commit 5a3683d60e56f4faa9552d3efafd87ef106dd393 ]

Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: i2c: ov5648: fix wrong pointer passed to IS_ERR() and PTR_ERR()

[ Upstream commit a6dd5265c21c28d0a782befe41a97c347e78f22f ]

IS_ERR() and PTR_ERR() use wrong pointer, it should be
sensor->dovdd, fix it.

Fixes: e43ccb0a045f ("media: i2c: Add support for the OV5648 image sensor")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov7670: remove ov7670_power_off from ov7670_remove

[ Upstream commit 5bf19572e31375368f19edd2dbb2e0789518bb99 ]

In ov7670_probe, it always invokes ov7670_power_off() no matter
the execution is successful or failed. So we cannot invoke it
agiain in ov7670_remove().

Fix this by removing ov7670_power_off from ov7670_remove.

Fixes: 030f9f682e66 ("media: ov7670: control clock along with power")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kselftest/arm64: bti: force static linking

[ Upstream commit d7a49291d786b4400996afe3afcc3ef5eeb6f0ef ]

The "bti" selftests are built with -nostdlib, which apparently
automatically creates a statically linked binary, which is what we want
and need for BTI (to avoid interactions with the dynamic linker).

However this is not true when building a PIE binary, which some
toolchains (Ubuntu) configure as the default.
When compiling btitest with such a toolchain, it will create a
dynamically linked binary, which will probably fail some tests, as the
dynamic linker might not support BTI:
===================
TAP version 13
1..18
not ok 1 nohint_func/call_using_br_x0
not ok 2 nohint_func/call_using_br_x16
not ok 3 nohint_func/call_using_blr
....
===================

To make sure we create static binaries, add an explicit -static on the
linker command line. This forces static linking even if the toolchain
defaults to PIE builds, and fixes btitest runs on BTI enabled machines.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Fixes: 314bcbf09f14 ("kselftest: arm64: Add BTI tests")
Link: https://lore.kernel.org/r/20220511172129.2078337-1-andre.przywara@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: ti: j721e-evm: Fix refcount leak in j721e_soc_probe_*

[ Upstream commit a34840c4eb3278a7c29c9c57a65ce7541c66f9f2 ]

of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not needed anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: 6748d0559059 ("ASoC: ti: Add custom machine driver for j721e EVM (CPB and IVI)")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220512111331.44774-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hinic: add missing destroy_workqueue in hinic_pf_to_mgmt_init

[ Upstream commit 382d917bfc1e92339dae3c8a636b2730e8bb5132 ]

hinic_pf_to_mgmt_init misses destroy_workqueue in error path,
this patch fixes that.

Fixes: 6dbb89014dc3 ("hinic: fix sending mailbox timeout in aeq event work")
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sctp: read sk->sk_bound_dev_if once in sctp_rcv()

[ Upstream commit a20ea298071f46effa3aaf965bf9bb34c901db3f ]

sctp_rcv() reads sk->sk_bound_dev_if twice while the socket
is not locked. Another cpu could change this field under us.

Fixes: 0fd9a65a76e8 ("[SCTP] Support SO_BINDTODEVICE socket option on incoming packets.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

m68k: math-emu: Fix dependencies of math emulation support

[ Upstream commit ed6bc6bf0a7d75e80eb1df883c09975ebb74e590 ]

If CONFIG_M54xx=y, CONFIG_MMU=y, and CONFIG_M68KFPU_EMU=y:

    {standard input}:272: Error: invalid instruction for this architecture; needs 68000 or higher (68000 [68ec000, 68hc000, 68hc001, 68008, 68302, 68306, 68307, 68322, 68356], 68010, 68020 [68k, 68ec020], 68030 [68ec030], 68040 [68ec040], 68060 [68ec060], cpu32 [68330, 68331, 68332, 68333, 68334, 68336, 68340, 68341, 68349, 68360], fidoa [fido]) -- statement `sub.b %d1,%d3' ignored
    {standard input}:609: Error: invalid instruction for this architecture; needs 68020 or higher (68020 [68k, 68ec020], 68030 [68ec030], 68040 [68ec040], 68060 [68ec060]) -- statement `bfextu 4(%a1){%d0,#8},%d0' ignored
    {standard input}:752: Error: operands mismatch -- statement `mulu.l 4(%a0),%d3:%d0' ignored
    {standard input}:1155: Error: operands mismatch -- statement `divu.l %d0,%d3:%d7' ignored

The math emulation support code is intended for 68020 and higher, and
uses several instructions or instruction modes not available on coldfire
or 68000.

Originally, the dependency of M68KFPU_EMU on MMU was fine, as MMU
support was only available on 68020 or higher.  But this assumption
was broken by the introduction of MMU support for M547x and M548x.

Drop the dependency on MMU, as the code should work fine on 68020 and up
without MMU (which are not yet supported by Linux, though).
Add dependencies on M68KCLASSIC (to rule out Coldfire) and FPU (kernel
has some type of floating-point support --- be it hardware or software
emulated, to rule out anything below 68020).

Fixes: 1f7034b9616e6f14 ("m68k: allow ColdFire 547x and 548x CPUs to be built with MMU enabled")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Greg Ungerer <gerg@linux-m68k.org>
Link: https://lore.kernel.org/r/18c34695b7c95107f60ccca82a4ff252f3edf477.1652446117.git.geert@linux-m68k.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme: set dma alignment to dword

[ Upstream commit 52fde2c07da606f3f120af4f734eadcfb52b04be ]

The nvme specification only requires qword alignment for segment
descriptors, and the driver already guarantees that. The spec has always
allowed user data to be dword aligned, which is what the queue's
attribute is for, so relax the alignment requirement to that value.

While we could allow byte alignment for some controllers when using
SGLs, we still need to support PRP, and that only allows dword.

Fixes: 3b2a1ebceba3 ("nvme: set dma alignment to qword")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: use hdev lock for accept_list and reject_list in conn req

[ Upstream commit fb048cae51bacdfbbda2954af3c213fdb1d484f4 ]

All accesses (both reads and modifications) to
hdev->{accept,reject}_list are protected by hdev lock,
except the ones in hci_conn_request_evt. This can cause a race
condition in the form of a list corruption.
The solution is to protect these lists in hci_conn_request_evt as well.

I was unable to find the exact commit that introduced the issue for the
reject list, I was only able to find it for the accept list.

Fixes: a55bd29d5227 ("Bluetooth: Add white list lookup for incoming connection requests")
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: use hdev lock in activate_scan for hci_is_adv_monitoring

[ Upstream commit 50a3633ae5e98cf1b80ef5b73c9e341aee9ad896 ]

hci_is_adv_monitoring's function documentation states that it must be
called under the hdev lock. Paths that leads to an unlocked call are:
discov_update => start_discovery => interleaved_discov => active_scan
and: discov_update => start_discovery => active_scan

The solution is to take the lock in active_scan during the duration of
the call to hci_is_adv_monitoring.

Fixes: c32d624640fd ("Bluetooth: disable filter dup when scan for adv monitor")
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: fix dangling sco_conn and use-after-free in sco_sock_timeout

[ Upstream commit 7aa1e7d15f8a5b65f67bacb100d8fc033b21efa2 ]

Connecting the same socket twice consecutively in sco_sock_connect()
could lead to a race condition where two sco_conn objects are created
but only one is associated with the socket. If the socket is closed
before the SCO connection is established, the timer associated with the
dangling sco_conn object won't be canceled. As the sock object is being
freed, the use-after-free problem happens when the timer callback
function sco_sock_timeout() accesses the socket. Here's the call trace:

dump_stack+0x107/0x163
? refcount_inc+0x1c/
print_address_description.constprop.0+0x1c/0x47e
? refcount_inc+0x1c/0x7b
kasan_report+0x13a/0x173
? refcount_inc+0x1c/0x7b
check_memory_region+0x132/0x139
refcount_inc+0x1c/0x7b
sco_sock_timeout+0xb2/0x1ba
process_one_work+0x739/0xbd1
? cancel_delayed_work+0x13f/0x13f
? __raw_spin_lock_init+0xf0/0xf0
? to_kthread+0x59/0x85
worker_thread+0x593/0x70e
kthread+0x346/0x35a
? drain_workqueue+0x31a/0x31a
? kthread_bind+0x4b/0x4b
ret_from_fork+0x1f/0x30

Link: https://syzkaller.appspot.com/bug?extid=2bef95d3ab4daa10155b
Reported-by: syzbot+2bef95d3ab4daa10155b@syzkaller.appspotmail.com
Fixes: e1dee2c1de2b ("Bluetooth: fix repeated calls to sco_sock_kill")
Signed-off-by: Ying Hsu <yinghsu@chromium.org>
Reviewed-by: Joseph Hwang <josephsih@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: hantro: HEVC: Fix tile info buffer value computation

[ Upstream commit d7f4149df818463c1d7094b35db6ebd79f46c7bd ]

Use pps->column_width_minus1[j] + 1 as value for the tile info buffer
instead of pps->column_width_minus1[j + 1].
The patch fixes DBLK_E_VIXS_2, DBLK_F_VIXS_2, DBLK_G_VIXS_2,
SAO_B_MediaTek_5, TILES_A_Cisco_2 and TILES_B_Cisco_1 tests in fluster.

Fixes: cb5dd5a0fa51 ("media: hantro: Introduce G2/HEVC decoder")
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: atmel: atmel-sama5d2-isc: fix wrong mask in YUYV format check

[ Upstream commit 91f49b80983f7bffdea9498209b2b896231ac776 ]

While this does not happen in production, this check should be done
versus the mask, as checking with the YCYC value may not include
some bits that may be set.
It is correct and safe to check the whole mask.

Fixes: 123aaf816b95 ("media: atmel: atmel-sama5d2-isc: fix YUYV format")
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: vsp1: Fix offset calculation for plane cropping

[ Upstream commit 5f25abec8f21b7527c1223a354d23c270befddb3 ]

The vertical subsampling factor is currently not considered in the
offset calculation for plane cropping done in rpf_configure_partition.
This causes a distortion (shift of the color plane) when formats with
the vsub factor larger than 1 are used (e.g. NV12, see
vsp1_video_formats in vsp1_pipe.c). This commit considers vsub factor
for all planes except plane 0 (luminance).

Drop generalization of the offset calculation to reduce the binary size.

Fixes: e5ad37b64de9 ("[media] v4l: vsp1: Add cropping support")
Signed-off-by: Michael Rodin <mrodin@de.adit-jv.com>
Signed-off-by: LUU HOAI <hoai.luu.ub@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: pvrusb2: fix array-index-out-of-bounds in pvr2_i2c_core_init

[ Upstream commit 471bec68457aaf981add77b4f590d65dd7da1059 ]

Syzbot reported that -1 is used as array index. The problem was in
missing validation check.

hdw->unit_number is initialized with -1 and then if init table walk fails
this value remains unchanged. Since code blindly uses this member for
array indexing adding sanity check is the easiest fix for that.

hdw->workpoll initialization moved upper to prevent warning in
__flush_work.

Reported-and-tested-by: syzbot+1a247e36149ffd709a9b@syzkaller.appspotmail.com
Fixes: d855497edbfb ("V4L/DVB (4228a): pvrusb2 to kernel 2.6.18")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: exynos4-is: Change clk_disable to clk_disable_unprepare

[ Upstream commit 9fadab72a6916c7507d7fedcd644859eef995078 ]

The corresponding API for clk_prepare_enable is clk_disable_unprepare,
other than clk_disable.

Fix this by changing clk_disable to clk_disable_unprepare.

Fixes: b4155d7d5b2c ("[media] exynos4-is: Ensure fimc-is clocks are not enabled until properly configured")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: i2c: rdacm2x: properly set subdev entity function

[ Upstream commit d2facee67b4883bb3e7461a0a93fd70d0c7b7261 ]

The subdevice entity function was left unset, which produces a warning
when probing the device:

mxc-md bus@58000000:camera: Entity type for entity rdacm20 19-0051 was
not initialized!

This patch will set entity function to MEDIA_ENT_F_CAM_SENSOR and leave
flags unset.

Fixes: 34009bffc1c6 ("media: i2c: Add RDACM20 driver")
Fixes: a59f853b3b4b ("media: i2c: Add driver for RDACM21 camera module")
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: atmel: atmel-isc: Fix PM disable depth imbalance in atmel_isc_probe

[ Upstream commit 395829c61a196a0821a703a49c4db3ac51daff73 ]

The pm_runtime_enable will decrease power disable depth.
If the probe fails, we should use pm_runtime_disable() to balance
pm_runtime_enable().

Fixes: 0a0e265515db ("media: atmel: atmel-isc: split driver into driver base and isc")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: st-delta: Fix PM disable depth imbalance in delta_probe

[ Upstream commit 94e3dba710fe0afc772172305444250023fc2d30 ]

The pm_runtime_enable will decrease power disable depth.
If the probe fails, we should use pm_runtime_disable() to balance
pm_runtime_enable().

Fixes: f386509e4959 ("[media] st-delta: STiH4xx multi-format video decoder v4l2 driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Acked-by: Hugues Fruchet <hugues.fruchet@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: do not attempt to reorder received 802.3 packets without agg session

[ Upstream commit 3968a66475b40691c37b5e6c76975f699671e10e ]

Fixes potential latency / packet drop issues in cases where a BA session has
not (yet) been established.

Fixes: e195dad14115 ("mt76: add support for 802.3 rx frames")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7921: Fix the error handling path of mt7921_pci_probe()

[ Upstream commit 4e90db5e21eb3bb272fe47386dc3506755e209e9 ]

In case of error, some resources must be freed, as already done above and
below the devm_kmemdup() and __mt7921e_mcu_drv_pmctrl() calls added in the
commit in Fixes:.

Fixes: 602cc0c9618a ("mt76: mt7921e: fix possible probe failure after reboot")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: exynos4-is: Fix PM disable depth imbalance in fimc_is_probe

[ Upstream commit 5c0db68ce0faeb000c3540d095eb272d671a6e03 ]

If probe fails then we need to call pm_runtime_disable() to balance
out the previous pm_runtime_enable() call.

Fixes: 9a761e436843 ("[media] exynos4-is: Add Exynos4x12 FIMC-IS driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: aspeed: Fix an error handling path in aspeed_video_probe()

[ Upstream commit 310fda622bbd38be17fb444f7f049b137af3bc0d ]

A dma_free_coherent() call is missing in the error handling path of the
probe, as already done in the remove function.

In fact, this call is included in aspeed_video_free_buf(). So use the
latter both in the error handling path of the probe and in the remove
function.
It is easier to see the relation with aspeed_video_alloc_buf() this way.

Fixes: d2b4387f3bdf ("media: platform: Add Aspeed Video Engine driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scripts/faddr2line: Fix overlapping text section failures

[ Upstream commit 1d1a0e7c5100d332583e20b40aa8c0a8ed3d7849 ]

There have been some recent reports of faddr2line failures:

  $ scripts/faddr2line sound/soundcore.ko sound_devnode+0x5/0x35
  bad symbol size: base: 0x0000000000000000 end: 0x0000000000000000

  $ ./scripts/faddr2line vmlinux.o enter_from_user_mode+0x24
  bad symbol size: base: 0x0000000000005fe0 end: 0x0000000000005fe0

The problem is that faddr2line is based on 'nm', which has a major
limitation: it doesn't know how to distinguish between different text
sections.  So if an offset exists in multiple text sections in the
object, it may fail.

Rewrite faddr2line to be section-aware, by basing it on readelf.

Fixes: 67326666e2d4 ("scripts: add script for translating stack dump function offsets")
Reported-by: Kaiwan N Billimoria <kaiwan.billimoria@gmail.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/29ff99f86e3da965b6e46c1cc2d72ce6528c17c3.1652382321.git.jpoimboe@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

kselftest/cgroup: fix test_stress.sh to use OUTPUT dir

[ Upstream commit 54de76c0123915e7533ce352de30a1f2d80fe81f ]

Running cgroup kselftest with O= fails to run the with_stress test due
to hardcoded ./test_core. Find test_core binary using the OUTPUT directory.

Fixes: 1a99fcc035fb ("selftests: cgroup: Run test_core under interfering stress")
Signed-off-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block: Fix the bio.bi_opf comment

[ Upstream commit 5d2ae14276e698c76fa0c8ce870103f343b38263 ]

Commit ef295ecf090d modified the Linux kernel such that the bottom bits
of the bi_opf member contain the operation instead of the topmost bits.
That commit did not update the comment next to bi_opf. Hence this patch.

From commit ef295ecf090d:
-#define bio_op(bio)    ((bio)->bi_opf >> BIO_OP_SHIFT)
+#define bio_op(bio)    ((bio)->bi_opf & REQ_OP_MASK)

Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Fixes: ef295ecf090d ("block: better op and flags encoding")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220511235152.1082246-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: samsung: Fix refcount leak in aries_audio_probe

[ Upstream commit bf4a9b2467b775717d0e9034ad916888e19713a3 ]

of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
If extcon_find_edev_by_node() fails, it doesn't call of_node_put()
Calling of_node_put() after extcon_find_edev_by_node() to fix this.

Fixes: 7a3a7671fa6c ("ASoC: samsung: Add driver for Aries boards")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220512043828.496-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: samsung: Use dev_err_probe() helper

[ Upstream commit 27c6eaebcf75e4fac145d17c7fa76bc64b60d24c ]

Use the dev_err_probe() helper, instead of open-coding the same
operation.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20211214020843.2225831-21-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dma-direct: don't fail on highmem CMA pages in dma_direct_alloc_pages

[ Upstream commit 92826e967535db2eb117db227b1191aaf98e4bb3 ]

When dma_direct_alloc_pages encounters a highmem page it just gives up
currently.  But what we really should do is to try memory using the
page allocator instead - without this platforms with a global highmem
CMA pool will fail all dma_alloc_pages allocations.

Fixes: efa70f2fdc84 ("dma-mapping: add a new dma_alloc_pages API")
Reported-by: Mark O'Neill <mao@tumblingdice.co.uk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dma-direct: factor out a helper for DMA_ATTR_NO_KERNEL_MAPPING allocations

[ Upstream commit d541ae55d538265861ef729a64d2d816d34ef1e2 ]

Split the code for DMA_ATTR_NO_KERNEL_MAPPING allocations into a separate
helper to make dma_direct_alloc a little more readable.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: pfuze100: Fix refcount leak in pfuze_parse_regulators_dt

[ Upstream commit afaa7b933ef00a2d3262f4d1252087613fb5c06d ]

of_node_get() returns a node with refcount incremented.
Calling of_node_put() to drop the reference when not needed anymore.

Fixes: 3784b6d64dc5 ("regulator: pfuze100: add pfuze100 regulator driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220511113506.45185-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: mxs-saif: Fix refcount leak in mxs_saif_probe

[ Upstream commit 2be84f73785fa9ed6443e3c5b158730266f1c2ee ]

of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.

Fixes: 08641c7c74dd ("ASoC: mxs: add device tree support for mxs-saif")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220511133725.39039-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: imx-hdmi: Fix refcount leak in imx_hdmi_probe

[ Upstream commit ed46731d8e86c8d65f5fc717671e1f1f6c3146d2 ]

of_find_device_by_node() takes reference, we should use put_device()
to release it. when devm_kzalloc() fails, it doesn't have a
put_device(), it will cause refcount leak.
Add missing put_device() to fix this.

Fixes: 6a5f850aa83a ("ASoC: fsl: Add imx-hdmi machine driver")
Fixes: f670b274f7f6 ("ASoC: imx-hdmi: add put_device() after of_find_device_by_node()")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220511052740.46903-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: fsl: Fix refcount leak in imx_sgtl5000_probe

[ Upstream commit 41cd312dfe980af869c3503b4d38e62ed20dd3b7 ]

of_find_i2c_device_by_node() takes a reference,
In error paths, we should call put_device() to drop
the reference to aviod refount leak.

Fixes: 81e8e4926167 ("ASoC: fsl: add sgtl5000 clock support for imx-sgtl5000")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20220511065803.3957-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: fsl: Use dev_err_probe() helper

[ Upstream commit 2e6f557ca35aa330dbf31c5e1cc8119eff1526fa ]

Use the dev_err_probe() helper, instead of open-coding the same
operation.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20211214020843.2225831-14-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: amd_sfh: Modify the hid name

[ Upstream commit 10f865cdcf37d26ae5e9595a7b4f9e06538e84e5 ]

Modifying the amd-sfh hid name to meaningful name.

Fixes: 4b2c53d93a4b ("SFH:Transport Driver to add support of AMD Sensor Fusion Hub (SFH)")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: amd_sfh: Modify the bus name

[ Upstream commit 206c3c2d85de8847fb732a5fb71443bacd287216 ]

Modifying the amd-sfh bus name to meaningful name.

Fixes: 4b2c53d93a4b ("SFH:Transport Driver to add support of AMD Sensor Fusion Hub (SFH)")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wilc1000: fix crash observed in AP mode with cfg80211_register_netdevice()

[ Upstream commit 868f0e28290c7a33e8cb79bfe97ebdcbb756e048 ]

Monitor(mon.) interface is used for handling the AP mode and 'ieee80211_ptr'
reference is not getting set for it. Like earlier implementation,
use register_netdevice() instead of cfg80211_register_netdevice() which
expects valid 'ieee80211_ptr' reference to avoid the possible crash.

Fixes: 2fe8ef106238 ("cfg80211: change netdev registration/unregistration semantics")
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220504161924.2146601-3-ajay.kathat@microchip.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath11k: Don't check arvif->is_started before sending management frames

[ Upstream commit 355333a217541916576351446b5832fec7930566 ]

Commit 66307ca04057 ("ath11k: fix mgmt_tx_wmi cmd sent to FW for
deleted vdev") wants both of below two conditions are true before
sending management frames:

1: ar->allocated_vdev_map & (1LL << arvif->vdev_id)
2: arvif->is_started

Actually the second one is not necessary because with the first one
we can make sure the vdev is present.

Also use ar->conf_mutex to synchronize vdev delete and mgmt. TX.

This issue is found in case of Passpoint scenario where ath11k
needs to send action frames before vdev is started.

Fix it by removing the second condition.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1

Fixes: 66307ca04057 ("ath11k: fix mgmt_tx_wmi cmd sent to FW for deleted vdev")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220506013614.1580274-3-quic_bqiang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/amd/ibs: Use interrupt regs ip for stack unwinding

[ Upstream commit 3d47083b9ff46863e8374ad3bb5edb5e464c75f8 ]

IbsOpRip is recorded when IBS interrupt is triggered. But there is
a skid from the time IBS interrupt gets triggered to the time the
interrupt is presented to the core. Meanwhile processor would have
moved ahead and thus IbsOpRip will be inconsistent with rsp and rbp
recorded as part of the interrupt regs. This causes issues while
unwinding stack using the ORC unwinder as it needs consistent rip,
rsp and rbp. Fix this by using rip from interrupt regs instead of
IbsOpRip for stack unwinding.

Fixes: ee9f8fce99640 ("x86/unwind: Add the ORC unwinder")
Reported-by: Dmitry Monakhov <dmtrmonakhov@yandex-team.ru>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220429051441.14251-1-ravi.bangoria@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

samples: bpf: Don't fail for a missing VMLINUX_BTF when VMLINUX_H is provided

[ Upstream commit ec24704492d8791a52a75a39e3ad762b6e017bc6 ]

samples/bpf build currently always fails if it can't generate
vmlinux.h from vmlinux, even when vmlinux.h is directly provided by
VMLINUX_H variable, which makes VMLINUX_H pointless.
Only fails when neither method works.

Fixes: 384b6b3bbf0d ("samples: bpf: Add vmlinux.h generation support")
Reported-by: CKI Project <cki-project@redhat.com>
Reported-by: Veronika Kabatova <vkabatov@redhat.com>
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220507161635.2219052-1-jmarchan@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: qcom_smd: Fix up PM8950 regulator configuration

[ Upstream commit b11b3d21a94d66bc05d1142e0b210bfa316c62be ]

Following changes have been made:

- S5, L4, L18, L20 and L21 were removed (S5 is managed by
SPMI, whereas the rest seems not to exist [or at least it's blocked
by Sony Loire /MSM8956/ RPM firmware])

- Supply maps have were adjusted to reflect regulator changes.

Fixes: e44adca5fa25 ("regulator: qcom_smd: Add PM8950 regulators")
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20220430163753.609909-1-konrad.dybcio@somainline.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "cpufreq: Fix possible race in cpufreq online error path"

[ Upstream commit 85f0e42bd65d01b351d561efb38e584d4c596553 ]

This reverts commit f346e96267cd76175d6c201b40f770c0116a8a04.

The commit tried to fix a possible real bug but it made it even worse.
The fix was simply buggy as now an error out to out_offline_policy or
out_exit_policy will try to release a semaphore which was never taken in
the first place. This works fine only if we failed late, i.e. via
out_destroy_policy.

Fixes: f346e96267cd ("cpufreq: Fix possible race in cpufreq online error path")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: spi-fsl-qspi: check return value after calling platform_get_resource_byname()

[ Upstream commit a2b331ac11e1cac56f5b7d367e9f3c5796deaaed ]

It will cause null-ptr-deref if platform_get_resource_byname() returns NULL,
we need check the return value.

Fixes: 858e26a515c2 ("spi: spi-fsl-qspi: Reduce devm_ioremap size to 4 times AHB buffer size")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220505093954.1285615-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iomap: iomap_write_failed fix

[ Upstream commit b71450e2cc4b3c79f33c5bd276d152af9bd54f79 ]

The @lend parameter of truncate_pagecache_range() should be the offset
of the last byte of the hole, not the first byte beyond it.

Fixes: ae259a9c8593 ("fs: introduce iomap infrastructure")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: stackleak: fix current_top_of_stack()

[ Upstream commit e85094c31ddb794ac41c299a5a7a68243148f829 ]

Due to some historical confusion, arm64's current_top_of_stack() isn't
what the stackleak code expects. This could in theory result in a number
of problems, and practically results in an unnecessary performance hit.
We can avoid this by aligning the arm64 implementation with the x86
implementation.

The arm64 implementation of current_top_of_stack() was added
specifically for stackleak in commit:

  0b3e336601b82c6a ("arm64: Add support for STACKLEAK gcc plugin")

This was intended to be equivalent to the x86 implementation, but the
implementation, semantics, and performance characteristics differ
wildly:

* On x86, current_top_of_stack() returns the top of the current task's
  task stack, regardless of which stack is in active use.

  The implementation accesses a percpu variable which the x86 entry code
  maintains, and returns the location immediately above the pt_regs on
  the task stack (above which x86 has some padding).

* On arm64 current_top_of_stack() returns the top of the stack in active
  use (i.e. the one which is currently being used).

  The implementation checks the SP against a number of
  potentially-accessible stacks, and will BUG() if no stack is found.

The core stackleak_erase() code determines the upper bound of stack to
erase with:

| if (on_thread_stack())
|         boundary = current_stack_pointer;
| else
|         boundary = current_top_of_stack();

On arm64 stackleak_erase() is always called on a task stack, and
on_thread_stack() should always be true. On x86, stackleak_erase() is
mostly called on a trampoline stack, and is sometimes called on a task
stack.

Currently, this results in a lot of unnecessary code being generated for
arm64 for the impossible !on_thread_stack() case. Some of this is
inlined, bloating stackleak_erase(), while portions of this are left
out-of-line and permitted to be instrumented (which would be a
functional problem if that code were reachable).

As a first step towards improving this, this patch aligns arm64's
implementation of current_top_of_stack() with x86's, always returning
the top of the current task's stack. With GCC 11.1.0 this results in the
bulk of the unnecessary code being removed, including all of the
out-of-line instrumentable code.

While I don't believe there's a functional problem in practice I've
marked this as a fix since the semantic was clearly wrong, the fix
itself is simple, and other code might rely upon this in future.

Fixes: 0b3e336601b82c6a ("arm64: Add support for STACKLEAK gcc plugin")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Popov <alex.popov@linux.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Will Deacon <will@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220427173128.2603085-2-mark.rutland@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: uvcvideo: Fix missing check to determine if element is found in list

[ Upstream commit 261f33388c29f6f3c12a724e6d89172b7f6d5996 ]

The list iterator will point to a bogus position containing HEAD if
the list is empty or the element is not found in list. This case
should be checked before any use of the iterator, otherwise it will
lead to a invalid memory access. The missing check here is before
"pin = iterm->id;", just add check here to fix the security bug.

In addition, the list iterator value will *always* be set and non-NULL
by list_for_each_entry(), so it is incorrect to assume that the iterator
value will be NULL if the element is not found in list, considering
the (mis)use here: "if (iterm == NULL".

Use a new value 'it' as the list iterator, while use the old value
'iterm' as a dedicated pointer to point to the found element, which
1. can fix this bug, due to 'iterm' is NULL only if it's not found.
2. do not need to change all the uses of 'iterm' after the loop.
3. can also limit the scope of the list iterator 'it' *only inside*
   the traversal loop by simply declaring 'it' inside the loop in the
   future, as usage of the iterator outside of the list_for_each_entry
   is considered harmful. https://lkml.org/lkml/2022/2/17/1032

Fixes: d5e90b7a6cd1c ("[media] uvcvideo: Move to video_ioctl2")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm: return an error pointer in msm_gem_prime_get_sg_table()

[ Upstream commit cf575e31611eb6dccf08fad02e57e35b2187704d ]

The msm_gem_prime_get_sg_table() needs to return error pointers on
error.  This is called from drm_gem_map_dma_buf() and returning a
NULL will lead to a crash in that function.

Fixes: ac45146733b0 ("drm/msm: fix msm_gem_prime_get_sg_table()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/485023/
Link: https://lore.kernel.org/r/YnOmtS5tfENywR9m@kili
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/mdp5: Return error code in mdp5_mixer_release when deadlock is detected

[ Upstream commit ca75f6f7c6f89365e40f10f641b15981b1f07c31 ]

There is a possibility for mdp5_get_global_state to return
-EDEADLK when acquiring the modeset lock, but currently global_state in
mdp5_mixer_release doesn't check for if an error is returned.

To avoid a NULL dereference error, let's have mdp5_mixer_release
check if an error is returned and propagate that error.

Reported-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Fixes: 7907a0d77cb4 ("drm/msm/mdp5: Use the new private_obj state")
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/485181/
Link: https://lore.kernel.org/r/20220505214051.155-2-quic_jesszhan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/mdp5: Return error code in mdp5_pipe_release when deadlock is detected

[ Upstream commit d59be579fa932c46b908f37509f319cbd4ca9a68 ]

mdp5_get_global_state runs the risk of hitting a -EDEADLK when acquiring
the modeset lock, but currently mdp5_pipe_release doesn't check for if
an error is returned. Because of this, there is a possibility of
mdp5_pipe_release hitting a NULL dereference error.

To avoid this, let's have mdp5_pipe_release check if
mdp5_get_global_state returns an error and propogate that error.

Changes since v1:
- Separated declaration and initialization of *new_state to avoid
  compiler warning
- Fixed some spelling mistakes in commit message

Changes since v2:
- Return 0 in case where hwpipe is NULL as this is considered normal
  behavior
- Added 2nd patch in series to fix a similar NULL dereference issue in
  mdp5_mixer_release

Reported-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Fixes: 7907a0d77cb4 ("drm/msm/mdp5: Use the new private_obj state")
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/485179/
Link: https://lore.kernel.org/r/20220505214051.155-1-quic_jesszhan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dp: fix event thread stuck in wait_event after kthread_stop()

[ Upstream commit 2f9b5b3ae2eb625b75a898212a76f3b8c6d0d2b0 ]

Event thread supposed to exit from its while loop after kthread_stop().
However there may has possibility that event thread is pending in the
middle of wait_event due to condition checking never become true.
To make sure event thread exit its loop after kthread_stop(), this
patch OR kthread_should_stop() into wait_event's condition checking
so that event thread will exit its loop after kernal_stop().

Changes in v2:
--  correct spelling error at commit title

Changes in v3:
-- remove unnecessary parenthesis
-- while(1) to replace while (!kthread_should_stop())

Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 570d3e5d28db ("drm/msm/dp: stop event kernel thread when DP unbind")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/484576/
Link: https://lore.kernel.org/r/1651595136-24312-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dsi: fix address for second DSI PHY on SDM660

[ Upstream commit 9208c707650354dff5b164b586837454f7285124 ]

Correct a typo in the address of the second DSI PHY in the SDM660 device
config.

Fixes: 694dd304cc29 ("drm/msm/dsi: Add phy configuration for SDM630/636/660")
Cc: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/484697/
Link: https://lore.kernel.org/r/20220503204340.935532-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: core: Fix enable_count imbalance with EXCLUSIVE_GET

[ Upstream commit c3e3ca05dae37f8f74bb80358efd540911cbc2c8 ]

Since the introduction of regulator->enable_count, a driver that did
an exclusive get on an already-enabled regulator would end up with
enable_count initialized to 0 but rdev->use_count initialized to 1.
With that starting point the regulator is effectively stuck enabled,
because if the driver attempted to disable it it would fail the
enable_count underflow check in _regulator_handle_consumer_disable().

The EXCLUSIVE_GET path in _regulator_get() now initializes
enable_count along with rdev->use_count so that the regulator can be
disabled without underflowing the former.

Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Fixes: 5451781dadf85 ("regulator: core: Only count load for enabled consumers")
Link: https://lore.kernel.org/r/20220505043152.12933-1-zev@bewilderbeest.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: fix types in copy_highpage()

[ Upstream commit 921d161f15d6b090599f6a8c23f131969edbd1fa ]

In copy_highpage() the `kto` and `kfrom` local variables are pointers to
struct page, but these are used to hold arbitrary pointers to kernel memory
. Each call to page_address() returns a void pointer to memory associated
with the relevant page, and copy_page() expects void pointers to this
memory.

This inconsistency was introduced in commit 2563776b41c3 ("arm64: mte:
Tags-aware copy_{user_,}highpage() implementations") and while this
doesn't appear to be harmful in practice it is clearly wrong.

Correct this by making `kto` and `kfrom` void pointers.

Fixes: 2563776b41c3 ("arm64: mte: Tags-aware copy_{user_,}highpage() implementations")
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Link: https://lore.kernel.org/r/20220420030418.3189040-3-tongtiangen@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/mm: Cleanup the control_va_addr_alignment() __setup handler

[ Upstream commit 1ef64b1e89e6d4018da46e08ffc32779a31160c7 ]

Clean up control_va_addr_alignment():

a. Make '=' required instead of optional (as documented).
b. Print a warning if an invalid option value is used.
c. Return 1 from the __setup handler when an invalid option value is
   used. This prevents the kernel from polluting init's (limited)
   environment space with the entire string.

Fixes: dfb09f9b7ab0 ("x86, amd: Avoid cache aliasing penalties on AMD family 15h")
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Link: https://lore.kernel.org/r/20220315001045.7680-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/aspeed-scu-ic: Fix irq_of_parse_and_map() return value

[ Upstream commit f03a9670d27d23fe734a456f16e2579b21ec02b4 ]

The irq_of_parse_and_map() returns 0 on failure, not a negative ERRNO.

Fixes: 04f605906ff0 ("irqchip: Add Aspeed SCU interrupt controller")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220423094227.33148-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/aspeed-i2c-ic: Fix irq_of_parse_and_map() return value

[ Upstream commit 50f0f26e7c8665763d0d7d3372dbcf191f94d077 ]

The irq_of_parse_and_map() returns 0 on failure, not a negative ERRNO.

Fixes: f48e699ddf70 ("irqchip/aspeed-i2c-ic: Add I2C IRQ controller for Aspeed")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220423094227.33148-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/exiu: Fix acknowledgment of edge triggered interrupts

[ Upstream commit 4efc851c36e389f7ed432edac0149acc5f94b0c7 ]

Currently the EXIU uses the fasteoi interrupt flow that is configured by
it's parent (irq-gic-v3.c). With this flow the only chance to clear the
interrupt request happens during .irq_eoi() and (obviously) this happens
after the interrupt handler has run. EXIU requires edge triggered
interrupts to be acked prior to interrupt handling. Without this we
risk incorrect interrupt dismissal when a new interrupt is delivered
after the handler reads and acknowledges the peripheral but before the
irq_eoi() takes place.

Fix this by clearing the interrupt request from .irq_ack() if we are
configured for edge triggered interrupts. This requires adopting the
fasteoi-ack flow instead of the fasteoi to ensure the ack gets called.

These changes have been tested using the power button on a
Developerbox/SC2A11 combined with some hackery in gpio-keys so I can
play with the different trigger mode [and an mdelay(500) so I can
can check what happens on a double click in both modes].

Fixes: 706cffc1b912 ("irqchip/exiu: Add support for Socionext Synquacer EXIU controller")
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220503134541.2566457-1-daniel.thompson@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86: Fix return value of __setup handlers

[ Upstream commit 12441ccdf5e2f5a01a46e344976cbbd3d46845c9 ]

__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled. A return
of 0 causes the boot option/value to be listed as an Unknown kernel
parameter and added to init's (limited) argument (no '=') or environment
(with '=') strings. So return 1 from these x86 __setup handlers.

Examples:

  Unknown kernel command line parameters "apicpmtimer
    BOOT_IMAGE=/boot/bzImage-517rc8 vdso=1 ring3mwait=disable", will be
    passed to user space.

  Run /sbin/init as init process
   with arguments:
     /sbin/init
     apicpmtimer
   with environment:
     HOME=/
     TERM=linux
     BOOT_IMAGE=/boot/bzImage-517rc8
     vdso=1
     ring3mwait=disable

Fixes: 2aae950b21e4 ("x86_64: Add vDSO for x86-64 with gettimeofday/clock_gettime/getcpu")
Fixes: 77b52b4c5c66 ("x86: add "debugpat" boot option")
Fixes: e16fd002afe2 ("x86/cpufeature: Enable RING3MWAIT for Knights Landing")
Fixes: b8ce33590687 ("x86_64: convert to clock events")
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Link: https://lore.kernel.org/r/20220314012725.26661-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

nl80211: don't hold RTNL in color change request

[ Upstream commit 1b550a0bebfc0b69d6ec08fe6eb58953a8aec48a ]

It's not necessary to hold the RTNL across color change
requests, since all the inner locking needs only the
wiphy mutex which we already hold as well.

Fixes: 0d2ab3aea50b ("nl80211: add support for BSS coloring")
Link: https://lore.kernel.org/r/20220414140402.32e03e8c261b.I5e7dc6bc563a129b938c43298da6bb4e812400a5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

virtio_blk: fix the discard_granularity and discard_alignment queue limits

[ Upstream commit 62952cc5bccd89b76d710de1d0b43244af0f2903 ]

The discard_alignment queue limit is named a bit misleading means the
offset into the block device at which the discard granularity starts.

On the other hand the discard_sector_alignment from the virtio 1.1 looks
similar to what Linux uses as discard granularity (even if not very well
described):

  "discard_sector_alignment can be used by OS when splitting a request
   based on alignment. "

And at least qemu does set it to the discard granularity.

So stop setting the discard_alignment and use the virtio
discard_sector_alignment to set the discard granularity.

Fixes: 1f23816b8eb8 ("virtio_blk: add discard and write zeroes support")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220418045314.360785-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf tools: Use Python devtools for version autodetection rather than runtime

[ Upstream commit 630af16eee495f583db5202c3613d1b191f10694 ]

This fixes the issue where the build will fail if only the Python2
runtime is installed but the Python3 devtools are installed. Currently
the workaround is 'make PYTHON=python3'.

Fix it by autodetecting Python based on whether python[x]-config exists
rather than just python[x] because both are needed for the build. Then
-config is stripped to find the Python runtime.

Testing
=======

 * Auto detect links with Python3 when the v3 devtools are installed
   and only Python 2 runtime is installed
 * Auto detect links with Python2 when both devtools are installed
 * Sensible warning is printed if no Python devtools are installed
 * 'make PYTHON=x' still automatically sets PYTHON_CONFIG=x-config
 * 'make PYTHON=x' fails if x-config doesn't exist
 * 'make PYTHON=python3' overrides Python2 devtools
 * 'make PYTHON=python2' overrides Python3 devtools
 * 'make PYTHON_CONFIG=x-config' works
 * 'make PYTHON=x PYTHON_CONFIG=x' works
 * 'make PYTHON=missing' reports an error
 * 'make PYTHON_CONFIG=missing' reports an error

Fixes: 79373082fa9de8be ("perf python: Autodetect python3 binary")
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220309194313.3350126-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: cadence-quadspi: fix Direct Access Mode disable for SoCFPGA

[ Upstream commit f724c296f2f2cc3f9342b0fc26239635cbed856e ]

The Cadence QSPI compatible string required for the SoCFPGA platform
changed from the default "cdns,qspi-nor" to "intel,socfpga-qspi" with
the introduction of an additional quirk in
commit 98d948eb8331 ("spi: cadence-quadspi: fix write completion support").
However, that change did not preserve the previously used
quirk for this platform.  Reinstate the `CQSPI_DISABLE_DAC_MODE` quirk
for the SoCFPGA platform.

Fixes: 98d948eb8331 ("spi: cadence-quadspi: fix write completion support")
Cc: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20220427153446.10113-1-abbotti@mev.co.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/rockchip: vop: fix possible null-ptr-deref in vop_bind()

[ Upstream commit f8c242908ad15bbd604d3bcb54961b7d454c43f8 ]

It will cause null-ptr-deref in resource_size(), if platform_get_resource()
returns NULL, move calling resource_size() after devm_ioremap_resource() that
will check 'res' to avoid null-ptr-deref.

Fixes: 2048e3286f34 ("drm: rockchip: Add basic drm driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220422032854.2995175-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

kunit: fix debugfs code to use enum kunit_status, not bool

[ Upstream commit 38289a26e1b8a37755f3e07056ca416c1ee2a2e8 ]

Commit 6d2426b2f258 ("kunit: Support skipped tests") switched to using
`enum kunit_status` to track the result of running a test/suite since we
now have more than just pass/fail.

This callsite wasn't updated, silently converting to enum to a bool and
then back.

Fixes: 6d2426b2f258 ("kunit: Support skipped tests")
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/panel: panel-simple: Fix proper bpc for AM-1280800N3TZQW-T00H

[ Upstream commit 7eafbecd2288c542ea15ea20cf1a7e64a25c21bc ]

AM-1280800N3TZQW-T00H panel support 8 bpc not 6 bpc as per
recent testing in i.MX8MM platform.

Fix it.

Fixes: bca684e69c4c ("drm/panel: simple: Add AM-1280800N3TZQW-T00H")
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211111094103.494831-1-jagan@amarulasolutions.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm: add missing include to msm_drv.c

[ Upstream commit 8123fe83c3a3448bbfa5b5b1cacfdfe7d076fca6 ]

Add explicit include of drm_bridge.h to the msm_drv.c to fix the
following warning:

drivers/gpu/drm/msm/msm_drv.c:236:17: error: implicit declaration of function 'drm_bridge_remove'; did you mean 'drm_bridge_detach'? [-Werror=implicit-function-declaration]

Fixes: d28ea556267c ("drm/msm: properly add and remove internal bridges")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/484310/
Link: https://lore.kernel.org/r/20220430180917.3819294-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/hdmi: fix error check return value of irq_of_parse_and_map()

[ Upstream commit 03371e4fbdeb7f596cbceacb59e474248b6d95ac ]

The irq_of_parse_and_map() function returns 0 on failure, and does not
return a negative value anyhow, so never enter this conditional branch.

Fixes: f6a8eaca0ea1 ("drm/msm/mdp5: use irqdomains")
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/483294/
Link: https://lore.kernel.org/r/20220425091831.3500487-1-lv.ruyi@zte.com.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/hdmi: check return value after calling platform_get_resource_byname()

[ Upstream commit a36e506711548df923ceb7ec9f6001375be799a5 ]

It will cause null-ptr-deref if platform_get_resource_byname() returns NULL,
we need check the return value.

Fixes: c6a57a50ad56 ("drm/msm/hdmi: add hdmi hdcp support (V3)")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/482992/
Link: https://lore.kernel.org/r/20220422032227.2991553-1-yangyingliang@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dsi: fix error checks and return values for DSI xmit functions

[ Upstream commit f0e7e9ed379c012c4d6b09a09b868accc426223c ]

As noticed by Dan ([1] an the followup thread) there are multiple issues
with the return values for MSM DSI command transmission callback. In
the error case it can easily return a positive value when it should
have returned a proper error code.

This commits attempts to fix these issues both in TX and in RX paths.

[1]: https://lore.kernel.org/linux-arm-msm/20211001123617.GH2283@kili/

Fixes: a689554ba6ed ("drm/msm: Initial add DSI connector support")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/480501/
Link: https://lore.kernel.org/r/20220401231104.967193-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dp: do not stop transmitting phy test pattern during DP phy compliance test

[ Upstream commit 2788b4efa60c1e03ac10a156f3fdbd3be0f9198c ]

At normal operation, transmit phy test pattern has to be terminated before
DP controller switch to video ready state. However during phy compliance
testing, transmit phy test pattern should not be terminated until end of
compliance test which usually indicated by unplugged interrupt.

Only stop sending the train pattern in dp_ctrl_on_stream() if we're not
doing compliance testing. We also no longer reset 'p_level' and
'v_level' within dp_ctrl_on_link() due to both 'p_level' and 'v_level'
are acquired from link status at previous dpcd read and we like to use
those level to start link training.

Changes in v2:
-- add more details commit text
-- correct Fixes

Changes in v3:
-- drop unnecessary braces

Fixes: 2e0adc765d88 ("drm/msm/dp: do not end dp link training until video is ready")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/483564/
Link: https://lore.kernel.org/r/1650995939-28467-3-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dp: reset DP controller before transmit phy test pattern

[ Upstream commit 581d69981159b00f0443d171a4b900089f34ccfe ]

DP controller state can not switch from video ready state to
transmit phy pattern state at run time. DP mainlink has to be
teared down followed by reset controller to default state to have
DP controller switch to transmit phy test pattern state and start
generate specified phy test pattern to sinker once main link setup
again.

Changes in v2:
-- correct Fixes's commit id

Fixes: 52352fe2f866 ("drm/msm/dp: use dp_ctrl_off_link_stream during PHY compliance test run")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/483563/
Link: https://lore.kernel.org/r/1650995939-28467-2-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dp: fix error check return value of irq_of_parse_and_map()

[ Upstream commit e92d0d93f86699b7b25c7906613fdc374d66c8ca ]

The irq_of_parse_and_map() function returns 0 on failure, and does not
return an negative value.

Fixes: 8ede2ecc3e5e ("drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets")
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/483176/
Link: https://lore.kernel.org/r/20220424032418.3173632-1-lv.ruyi@zte.com.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dp: stop event kernel thread when DP unbind

[ Upstream commit 570d3e5d28db7a94557fa179167a9fb8642fb8a1 ]

Current DP driver implementation, event thread is kept running
after DP display is unbind. This patch fix this problem by disabling
DP irq and stop event thread to exit gracefully at dp_display_unbind().

Changes in v2:
-- start event thread at dp_display_bind()

Changes in v3:
-- disable all HDP interrupts at unbind
-- replace dp_hpd_event_setup() with dp_hpd_event_thread_start()
-- replace dp_hpd_event_stop() with dp_hpd_event_thread_stop()
-- move init_waitqueue_head(&dp->event_q) to probe()
-- move spin_lock_init(&dp->event_lock) to probe()

Changes in v4:
-- relocate both dp_display_bind() and dp_display_unbind() to bottom of file

Changes in v5:
-- cancel relocation of both dp_display_bind() and dp_display_unbind()

Changes in v6:
-- move empty event q to dp_event_thread_start()

Changes in v7:
-- call ktheread_stop() directly instead of dp_hpd_event_thread_stop() function

Changes in v8:
-- return error immediately if audio registration failed.

Changes in v9:
-- return error immediately if event thread create failed.

Changes in v10:
-- delete extra  DRM_ERROR("failed to create DP event thread\n");

Fixes: 8ede2ecc3e5e ("drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/482399/
Link: https://lore.kernel.org/r/1650318988-17580-1-git-send-email-quic_khsieh@quicinc.com
[DB: fixed Fixes tag]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/disp/dpu1: set vbif hw config to NULL to avoid use after memory free during pm runtime resume

[ Upstream commit fa5186b279ecf44b14fb435540d2065be91cb1ed ]

BUG: Unable to handle kernel paging request at virtual address 006b6b6b6b6b6be3

Call trace:
  dpu_vbif_init_memtypes+0x40/0xb8
  dpu_runtime_resume+0xcc/0x1c0
  pm_generic_runtime_resume+0x30/0x44
  __genpd_runtime_resume+0x68/0x7c
  genpd_runtime_resume+0x134/0x258
  __rpm_callback+0x98/0x138
  rpm_callback+0x30/0x88
  rpm_resume+0x36c/0x49c
  __pm_runtime_resume+0x80/0xb0
  dpu_core_irq_uninstall+0x30/0xb0
  dpu_irq_uninstall+0x18/0x24
  msm_drm_uninit+0xd8/0x16c

Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/483255/
Link: https://lore.kernel.org/r/1650857213-30075-1-git-send-email-quic_vpolimer@quicinc.com
[DB: fixed Fixes tag]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf tools: Add missing headers needed by util/data.h

[ Upstream commit 4d27cf1d9de5becfa4d1efb2ea54dba1b9fc962a ]

'struct perf_data' in util/data.h uses the "u64" data type, which is
defined in "linux/types.h".

If we only include util/data.h, the following compilation error occurs:

  util/data.h:38:3: error: unknown type name ‘u64’
     u64    version;
     ^~~

Solution: include "linux/types.h." to add the needed type definitions.

Fixes: 258031c017c353e8 ("perf header: Add DIR_FORMAT feature to describe directory data")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220429090539.212448-1-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: rk3328: fix disabling mclk on pclk probe failure

[ Upstream commit dd508e324cdde1c06ace08a8143fa50333a90703 ]

If preparing/enabling the pclk fails, the probe function should
unprepare and disable the previously prepared and enabled mclk,
which it doesn't do. This commit rectifies this.

Fixes: c32759035ad2 ("ASoC: rockchip: support ACODEC for rk3328")
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Reviewed-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Link: https://lore.kernel.org/r/20220427172310.138638-1-frattaroli.nicolas@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/speculation: Add missing prototype for unpriv_ebpf_notify()

[ Upstream commit 2147c438fde135d6c145a96e373d9348e7076f7f ]

Fix the following warnings seen with "make W=1":

  kernel/sysctl.c:183:13: warning: no previous prototype for ‘unpriv_ebpf_notify’ [-Wmissing-prototypes]
    183 | void __weak unpriv_ebpf_notify(int new_state)
        |             ^~~~~~~~~~~~~~~~~~

  arch/x86/kernel/cpu/bugs.c:659:6: warning: no previous prototype for ‘unpriv_ebpf_notify’ [-Wmissing-prototypes]
    659 | void unpriv_ebpf_notify(int new_state)
        |      ^~~~~~~~~~~~~~~~~~

Fixes: 44a3918c8245 ("x86/speculation: Include unprivileged eBPF status in Spectre v2 mitigation reporting")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/5689d065f739602ececaee1e05e68b8644009608.1650930000.git.jpoimboe@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: intel: fix possible null-ptr-deref in ebu_nand_probe()

[ Upstream commit ddf66aefd685fd46500b9917333e1b1e118276dc ]

It will cause null-ptr-deref when using 'res', if platform_get_resource()
returns NULL, so move using 'res' after devm_ioremap_resource() that
will check it to avoid null-ptr-deref.

Fixes: 0b1039f016e8 ("mtd: rawnand: Add NAND controller support on Intel LGM SoC")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220426084913.4021868-2-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: cadence: fix possible null-ptr-deref in cadence_nand_dt_probe()

[ Upstream commit a28ed09dafee20da51eb26452950839633afd824 ]

It will cause null-ptr-deref when using 'res', if platform_get_resource()
returns NULL, so move using 'res' after devm_ioremap_resource() that
will check it to avoid null-ptr-deref.
And use devm_platform_get_and_ioremap_resource() to simplify code.

Fixes: ec4ba01e894d ("mtd: rawnand: Add new Cadence NAND driver to MTD subsystem")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220426084913.4021868-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/pm: Fix false positive kmemleak report in msr_build_context()

[ Upstream commit b0b592cf08367719e1d1ef07c9f136e8c17f7ec3 ]

Since

  e2a1256b17b1 ("x86/speculation: Restore speculation related MSRs during S3 resume")

kmemleak reports this issue:

  unreferenced object 0xffff888009cedc00 (size 256):
    comm "swapper/0", pid 1, jiffies 4294693823 (age 73.764s)
    hex dump (first 32 bytes):
      00 00 00 00 00 00 00 00 48 00 00 00 00 00 00 00  ........H.......
      00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    backtrace:
      msr_build_context (include/linux/slab.h:621)
      pm_check_save_msr (arch/x86/power/cpu.c:520)
      do_one_initcall (init/main.c:1298)
      kernel_init_freeable (init/main.c:1370)
      kernel_init (init/main.c:1504)
      ret_from_fork (arch/x86/entry/entry_64.S:304)

Reproducer:

  - boot the VM with a debug kernel config (see
    https://github.com/multipath-tcp/mptcp_net-next/issues/268)
  - wait ~1 minute
  - start a kmemleak scan

The root cause here is alignment within the packed struct saved_context
(from suspend_64.h). Kmemleak only searches for pointers that are
aligned (see how pointers are scanned in kmemleak.c), but pahole shows
that the saved_msrs struct member and all members after it in the
structure are unaligned:

  struct saved_context {
    struct pt_regs             regs;                 /*     0   168 */
    /* --- cacheline 2 boundary (128 bytes) was 40 bytes ago --- */
    u16                        ds;                   /*   168     2 */

    ...

    u64                        misc_enable;          /*   232     8 */
    bool                       misc_enable_saved;    /*   240     1 */

   /* Note below odd offset values for the remainder of this struct */

    struct saved_msrs          saved_msrs;           /*   241    16 */
    /* --- cacheline 4 boundary (256 bytes) was 1 bytes ago --- */
    long unsigned int          efer;                 /*   257     8 */
    u16                        gdt_pad;              /*   265     2 */
    struct desc_ptr            gdt_desc;             /*   267    10 */
    u16                        idt_pad;              /*   277     2 */
    struct desc_ptr            idt;                  /*   279    10 */
    u16                        ldt;                  /*   289     2 */
    u16                        tss;                  /*   291     2 */
    long unsigned int          tr;                   /*   293     8 */
    long unsigned int          safety;               /*   301     8 */
    long unsigned int          return_address;       /*   309     8 */

    /* size: 317, cachelines: 5, members: 25 */
    /* last cacheline: 61 bytes */
  } __attribute__((__packed__));

Move misc_enable_saved to the end of the struct declaration so that
saved_msrs fits in before the cacheline 4 boundary.

The comment above the saved_context declaration says to fix wakeup_64.S
file and __save/__restore_processor_state() if the struct is modified:
it looks like all the accesses in wakeup_64.S are done through offsets
which are computed at build-time. Update that comment accordingly.

At the end, the false positive kmemleak report is due to a limitation
from kmemleak but it is always good to avoid unaligned members for
optimisation purposes.

Please note that it looks like this issue is not new, e.g.

  https://lore.kernel.org/all/9f1bb619-c4ee-21c4-a251-870bd4db04fa@lwfinger.net/
  https://lore.kernel.org/all/94e48fcd-1dbd-ebd2-4c91-f39941735909@molgen.mpg.de/

  [ bp: Massage + cleanup commit message. ]

Fixes: 7a9c2dd08ead ("x86/pm: Introduce quirk framework to save/restore extra MSR registers around suspend/resume")
Suggested-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220426202138.498310-1-matthieu.baerts@tessares.net
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: spi-nor: core: Check written SR value in spi_nor_write_16bit_sr_and_check()

[ Upstream commit 70dd83d737d8900b2d98db6dc6b928c596334d37 ]

Read back Status Register 1 to ensure that the written byte match the
received value and return -EIO if read back test failed.

Without this patch, spi_nor_write_16bit_sr_and_check() only check the
second half of the 16bit. It causes errors like spi_nor_sr_unlock()
return success incorrectly when spi_nor_write_16bit_sr_and_check()
doesn't write SR successfully.

Fixes: 39d1e3340c73 ("mtd: spi-nor: Fix clearing of QE bit on lock()/unlock()")
Signed-off-by: Chen-Tsung Hsieh <chentsung@chromium.org>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20220126073227.3401275-1-chentsung@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

libbpf: Fix logic for finding matching program for CO-RE relocation

[ Upstream commit 966a7509325395c51c5f6d89e7352b0585e4804b ]

Fix the bug in bpf_object__relocate_core() which can lead to finding
invalid matching BPF program when processing CO-RE relocation. IF
matching program is not found, last encountered program will be assumed
to be correct program and thus error detection won't detect the problem.

Fixes: 9c82a63cf370 ("libbpf: Fix CO-RE relocs against .text section")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-4-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/resctrl: Fix null pointer dereference on open failed

[ Upstream commit c7b607fa9325ccc94982774c505176677117689c ]

Currently if opening /dev/null fails to open then file pointer fp
is null and further access to fp via fprintf will cause a null
pointer dereference. Fix this by returning a negative error value
when a null fp is detected.

Detected using cppcheck static analysis:
tools/testing/selftests/resctrl/fill_buf.c:124:6: note: Assuming
that condition '!fp' is not redundant
 if (!fp)
     ^
tools/testing/selftests/resctrl/fill_buf.c:126:10: note: Null
pointer dereference
 fprintf(fp, "Sum: %d ", ret);

Fixes: a2561b12fe39 ("selftests/resctrl: Add built in benchmark")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/v3d: Fix null pointer dereference of pointer perfmon

[ Upstream commit ce7a1ecf3f9f1fccaf67295307614511d8e11b13 ]

In the unlikely event that pointer perfmon is null the WARN_ON return path
occurs after the pointer has already been deferenced. Fix this by only
dereferencing perfmon after it has been null checked.

Fixes: 26a4dc29b74a ("drm/v3d: Expose performance counters to userspace")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220424183512.1365683-1-colin.i.king@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: core: Exclude UECxx from SFR dump list

[ Upstream commit ef60031022eb6d972aac86ca26c98c33e1289436 ]

Some devices may return invalid or zeroed data during an UIC error
condition. In addition, reading these SFRs will clear them. This means the
subsequent error handling will not be able to see them and therefore no
error handling will be scheduled.

Skip reading these SFRs in ufshcd_dump_regs().

Link: https://lore.kernel.org/r/1648689845-33521-1-git-send-email-kwmad.kim@samsung.com
Fixes: d67247566450 ("scsi: ufs: Use explicit access size in ufshcd_dump_regs")
Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: qcom: Fix ufs_qcom_resume()

[ Upstream commit bee40dc167da159ea5b939c074e1da258610a3d6 ]

Clearing hba->is_sys_suspended if ufs_qcom_resume() succeeds is wrong. That
variable must only be cleared if all actions involved in a resume succeed.
Hence remove the statement that clears hba->is_sys_suspended from
ufs_qcom_resume().

Link: https://lore.kernel.org/r/20220419225811.4127248-23-bvanassche@acm.org
Fixes: 81c0fc51b7a7 ("ufs-qcom: add support for Qualcomm Technologies Inc platforms")
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: iscsi: Fix harmless double shift bug

[ Upstream commit 565138ac5f8a5330669a20e5f94759764e9165ec ]

These flags are supposed to be bit numbers.  Right now they cause a double
shift bug where we use BIT(BIT(2)) instead of BIT(2).  Fortunately, the bit
numbers are small and it's done consistently so it does not cause an issue
at run time.

Link: https://lore.kernel.org/r/YmFyWHf8nrrx+SHa@kili
Fixes: 5bd856256f8c ("scsi: iscsi: Merge suspend fields")
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: adjust display_v_end for eDP and DP

[ Upstream commit e18aeea7f5efb9508722c8c7fd4d32e6f8cdfe50 ]

The “DP timing” requires the active region to be defined in the
bottom-right corner of the frame dimensions which is different
with DSI. Therefore both display_h_end and display_v_end need
to be adjusted accordingly. However current implementation has
only display_h_end adjusted.

Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Fixes: fc3a69ec68d3 ("drm/msm/dpu: intf timing path for displayport")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/476277/
Link: https://lore.kernel.org/r/1645824192-29670-2-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/hdmi: switch to drm_bridge_connector

[ Upstream commit caa24223463dfd75702a24daac13c93edb4aafac ]

Merge old hdmi_bridge and hdmi_connector implementations. Use
drm_bridge_connector instead.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20211015001100.4193241-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dp: Modify prototype of encoder based API

[ Upstream commit 167dac97eb46c7b8a15b2195080e191bb0c9ce35 ]

Functions in the DisplayPort code that relates to individual instances
(encoders) are passed both the struct msm_dp and the struct drm_encoder.
But in a situation where multiple DP instances would exist this means
that the caller need to resolve which struct msm_dp relates to the
struct drm_encoder at hand.

Store a reference to the struct msm_dp associated with each
dpu_encoder_virt to allow the particular instance to be associate with
the encoder in the following patch.

Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211016221843.2167329-3-bjorn.andersson@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/damon: add damon to selftests root Makefile

[ Upstream commit 678f0cdc572c5fda940cb038d70eebb8d818adc8 ]

Currently the damon selftests are not built with the rest of the
selftests. We add damon to the list of targets.

Fixes: b348eb7abd09 ("mm/damon: add user space selftests")
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Yuanchu Xie <yuanchu@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

of: overlay: do not break notify on NOTIFY_{OK|STOP}

[ Upstream commit 5f756a2eaa4436d7d3dc1e040147f5e992ae34b5 ]

We should not break overlay notifications on NOTIFY_{OK|STOP}
otherwise we might break on the first fragment. We should only stop
notifications if a *real* errno is returned by one of the listeners.

Fixes: a1d19bd4cf1fe ("of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220420130205.89435-1-nuno.sa@analog.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: rockchip: fix missing error on unsupported SPI_CS_HIGH

[ Upstream commit d5d933f09ac326aebad85bfb787cc786ad477711 ]

The hardware (except for the ROCKCHIP_SPI_VER2_TYPE2 version) does not
support active-high native chip selects. However if such a CS is configured
the core does not error as it normally should, because the
'ctlr->use_gpio_descriptors = true' line in rockchip_spi_probe() makes the
core set SPI_CS_HIGH in ctlr->mode_bits.

In such a case the spi-rockchip driver operates normally but produces an
active-low chip select signal without notice.

There is no provision in the current core code to handle this
situation. Fix by adding a check in the ctlr->setup function (similarly to
what spi-atmel.c does).

This cannot be done reading the SPI_CS_HIGH but in ctlr->mode_bits because
that bit gets always set by the core for master mode (see above).

Fixes: eb1262e3cc8b ("spi: spi-rockchip: use num-cs property and ctlr->enable_gpiods")
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20220421213251.1077899-1-luca.ceresoli@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: rockchip: Preset cs-high and clk polarity in setup progress

[ Upstream commit 3a4bf922d42efa4e9a3dc803d1fd786d43e8a501 ]

After power up, the cs and clock is in default status, and the cs-high
and clock polarity dts property configuration will take no effect until
the calling of rockchip_spi_config in the first transmission.
So preset them to make sure a correct voltage before the first
transmission coming.

Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Link: https://lore.kernel.org/r/20220216014028.8123-5-jon.lin@rock-chips.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: rockchip: Stop spi slave dma receiver when cs inactive

[ Upstream commit 869f2c94db92f0f1d6acd0dff1c1ebb8160f5e29 ]

The spi which's version is higher than ver 2 will automatically
enable this feature.

If the length of master transmission is uncertain, the RK spi slave
is better to automatically stop after cs inactive instead of waiting
for xfer_completion forever.

Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Link: https://lore.kernel.org/r/20220216014028.8123-4-jon.lin@rock-chips.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fsnotify: fix wrong lockdep annotations

[ Upstream commit 623af4f538b5df9b416e1b82f720af7371b4c771 ]

Commit 6960b0d909cd ("fsnotify: change locking order") changed some
of the mark_mutex locks in direct reclaim path to use:
  mutex_lock_nested(&group->mark_mutex, SINGLE_DEPTH_NESTING);

This change is explained:
 "...It uses nested locking to avoid deadlock in case we do the final
  iput() on an inode which still holds marks and thus would take the
  mutex again when calling fsnotify_inode_delete() in destroy_inode()."

The problem is that the mutex_lock_nested() is not a nested lock at
all. In fact, it has the opposite effect of preventing lockdep from
warning about a very possible deadlock.

Due to these wrong annotations, a deadlock that was introduced with
nfsd filecache in kernel v5.4 went unnoticed in v5.4.y for over two
years until it was reported recently by Khazhismel Kumykov, only to
find out that the deadlock was already fixed in kernel v5.5.

Fix the wrong lockdep annotations.

Cc: Khazhismel Kumykov <khazhy@google.com>
Fixes: 6960b0d909cd ("fsnotify: change locking order")
Link: https://lore.kernel.org/r/20220321112310.vpr7oxro2xkz5llh@quack3.lan/
Link: https://lore.kernel.org/r/20220422120327.3459282-4-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

inotify: show inotify mask flags in proc fdinfo

[ Upstream commit a32e697cda27679a0327ae2cafdad8c7170f548f ]

The inotify mask flags IN_ONESHOT and IN_EXCL_UNLINK are not "internal
to kernel" and should be exposed in procfs fdinfo so CRIU can restore
them.

Fixes: 6933599697c9 ("inotify: hide internal kernel bits from fdinfo")
Link: https://lore.kernel.org/r/20220422120327.3459282-2-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>