platform/upstream/kernel-adaptation-pc.git
12 years agobrcmfmac: store IEs per virtual interface
Arend van Spriel [Mon, 22 Oct 2012 20:55:41 +0000 (13:55 -0700)]
brcmfmac: store IEs per virtual interface

For AP feature the IEs are stored in global structure. For future
functionality like P2P-GO it needs to be stored per virtual interface
so better store it in the virtual interface structure.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobrcmfmac: remove unnecessary macro usage in brcmf_cfg80211_resume()
Arend van Spriel [Mon, 22 Oct 2012 20:55:40 +0000 (13:55 -0700)]
brcmfmac: remove unnecessary macro usage in brcmf_cfg80211_resume()

The macro wiphy_to_cfg() is a bit redundant as the function already
has a pointer variable to brcmf_cfg80211_info structure.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobrcmfmac: add virtual interface support in brcmf_cfg80211_suspend()
Arend van Spriel [Mon, 22 Oct 2012 20:55:39 +0000 (13:55 -0700)]
brcmfmac: add virtual interface support in brcmf_cfg80211_suspend()

With multiple interfaces suspend will need to iterate over all and
bring down the link.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobrcmfmac: use memset when setting a broadcast mac address
Arend van Spriel [Mon, 22 Oct 2012 20:55:38 +0000 (13:55 -0700)]
brcmfmac: use memset when setting a broadcast mac address

The driver had a global constant ether_bcast, which was copied
whenever a broadcast mac address was needed. This patch does a
memset(dest, 0xFF, ETH_ALEN) instead and consequently removes
the global ether_bcast.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobrcmfmac: rename check_sys_up() to check_vif_up()
Arend van Spriel [Mon, 22 Oct 2012 20:55:37 +0000 (13:55 -0700)]
brcmfmac: rename check_sys_up() to check_vif_up()

The function now return the status for a virtual interface so
it seems better rename the function to understand what it does.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobrcmfmac: remove unused enumeration wl_prof_list
Arend van Spriel [Mon, 22 Oct 2012 20:55:36 +0000 (13:55 -0700)]
brcmfmac: remove unused enumeration wl_prof_list

The enumeration wl_prof_list is no longer used so it can be safely
removed.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobrcmfmac: cleanup brcmf_cfg80211_profile structure
Arend van Spriel [Mon, 22 Oct 2012 20:55:35 +0000 (13:55 -0700)]
brcmfmac: cleanup brcmf_cfg80211_profile structure

A couple of unused fields have been removed and kernel-doc info has
been added to the structure.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobrcmfmac: remove debugfs functionality from wl_cfg80211.c
Arend van Spriel [Mon, 22 Oct 2012 20:55:34 +0000 (13:55 -0700)]
brcmfmac: remove debugfs functionality from wl_cfg80211.c

In wl_cfg80211.c debugfs directory was created to expose
dtim_period and beacon_interval. However, this can be easily
obtained using iw so it is removed from the driver.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobrcmfmac: separate connection status from scanning status
Arend van Spriel [Mon, 22 Oct 2012 20:55:33 +0000 (13:55 -0700)]
brcmfmac: separate connection status from scanning status

The connection status is to be kept per virtual interface and
the scanning status is for device. So they need to be separated
for multiple interface support.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobrcmfmac: use vif struct to check_sys_up() function
Arend van Spriel [Mon, 22 Oct 2012 20:55:32 +0000 (13:55 -0700)]
brcmfmac: use vif struct to check_sys_up() function

This checks the status that will soon be moved to virtual
interface data so preparing for that use the structure
brcmf_cfg80211_vif as parameter instead.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Hante Meulemen <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobrcmfmac: store profile information per virtual interface
Arend van Spriel [Mon, 22 Oct 2012 20:55:31 +0000 (13:55 -0700)]
brcmfmac: store profile information per virtual interface

The profile information applies to an interface so each virtual
interface needs it. So it is removed from brcmf_cfg80211_info
and added to brcmf_cfg80211_vif structure.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobrcmfmac: introduce brcmf_cfg80211_vif structure
Arend van Spriel [Mon, 22 Oct 2012 20:55:30 +0000 (13:55 -0700)]
brcmfmac: introduce brcmf_cfg80211_vif structure

This patch introduces the brcmf_cfg80211_vif structure which is
used to keep track of multiple virtual interfaces in the driver.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobrcmfmac: remove brcmf_find_bssidx() function
Arend van Spriel [Mon, 22 Oct 2012 17:36:27 +0000 (10:36 -0700)]
brcmfmac: remove brcmf_find_bssidx() function

The function brcmf_find_bssidx() is no longer used so remove
it from the driver code.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobrcmfmac: change parameter list for send_key_to_dongle()
Arend van Spriel [Mon, 22 Oct 2012 17:36:26 +0000 (10:36 -0700)]
brcmfmac: change parameter list for send_key_to_dongle()

The first two parameters given to send_key_to_dongle() are redundant
so they have been removed.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobrcmfmac: use fwil for default configuration setup.
Hante Meuleman [Mon, 22 Oct 2012 17:36:25 +0000 (10:36 -0700)]
brcmfmac: use fwil for default configuration setup.

modify the setup code to use the refactored firmware interface layer.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobrcmfmac: streamline header parse code of sdio glom read
Franky Lin [Mon, 22 Oct 2012 17:36:24 +0000 (10:36 -0700)]
brcmfmac: streamline header parse code of sdio glom read

Use brcmf_sdio_hdparser to handle header of super frame and sub
frame in glomming frame read.

Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobrcmfmac: use struct brcmf_if as interface object for fwil functions
Arend van Spriel [Mon, 22 Oct 2012 17:36:23 +0000 (10:36 -0700)]
brcmfmac: use struct brcmf_if as interface object for fwil functions

The functions for communicating were given the net_device only because
its private data contained struct brcmf_if object. However, not all
firmware related interfaces will be associated with a net_device. To
accomodate provisioning firmware for such interfaces the struct
brcmf_if object will be passed to the fwil functions.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobrcmfmac: add function converting ieee80211_channel to chanspec
Arend van Spriel [Mon, 22 Oct 2012 17:36:22 +0000 (10:36 -0700)]
brcmfmac: add function converting ieee80211_channel to chanspec

The firmware carries channel information in a different format
as the provided ieee80211_channel structure. Conversion is needed
when receiving requests from cfg80211 carrying ieee80211_channel
structures. This patch adds a utility function to do that.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobrcmfmac: use bssidx from struct brcmf_if for bsscfg specific commands
Arend van Spriel [Mon, 22 Oct 2012 17:36:21 +0000 (10:36 -0700)]
brcmfmac: use bssidx from struct brcmf_if for bsscfg specific commands

The firmware interface has functions to send bsscfg specific commands
to the device. These functions currently have a bssidx parameter, but
that same information is stored in struct brcmf_if, which is in the
private data of the net_device parameter.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobrcmfmac: rework driver initialization in brcmf_bus_start()
Arend van Spriel [Mon, 22 Oct 2012 17:36:20 +0000 (10:36 -0700)]
brcmfmac: rework driver initialization in brcmf_bus_start()

In brcmf_bus_start() a number of settings are sent to the device. For
this functions are used that bypass the common firmware interface.
By reordering the code in brcmf_bus_start() this bypass can be removed.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobrcmfmac: extend struct brcmf_if with bssidx field
Arend van Spriel [Mon, 22 Oct 2012 17:36:19 +0000 (10:36 -0700)]
brcmfmac: extend struct brcmf_if with bssidx field

When the firmware notifies the driver about adding a new interface
it also provides an index for the bss associated with this interface.
This index will be needed for upcoming features like peer-to-peer.
By adding this index in struct brcmf_if it is easy to obtain as this
will be associated with the net_device private data.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobrcmfmac: clean usb download code.
Hante Meuleman [Mon, 22 Oct 2012 17:36:18 +0000 (10:36 -0700)]
brcmfmac: clean usb download code.

reuse ioctl waiting method.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobrcmfmac: remove redundant function brcmf_c_mkiovar_bsscfg
Hante Meuleman [Mon, 22 Oct 2012 17:36:17 +0000 (10:36 -0700)]
brcmfmac: remove redundant function brcmf_c_mkiovar_bsscfg

function brcmf_c_mkiovar_bsscfg became redundant with refactoring
of firmware interface layer.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobrcmfmac: change testmode command to use new firmware interface layer
Hante Meuleman [Mon, 22 Oct 2012 17:36:16 +0000 (10:36 -0700)]
brcmfmac: change testmode command to use new firmware interface layer

switch to new firmware interface layer and remove redundant code.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobrcmfmac: remove unused iswl variable.
Hante Meuleman [Mon, 22 Oct 2012 17:36:15 +0000 (10:36 -0700)]
brcmfmac: remove unused iswl variable.

Variable iswl always gets initialised to the same and support for
this var is not needed.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobrcmfmac: refactor firmware interface layer.
Hante Meuleman [Mon, 22 Oct 2012 17:36:14 +0000 (10:36 -0700)]
brcmfmac: refactor firmware interface layer.

Refactor the functions that are related to getting and setting
data to and and from the firmware.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agocarl9170: split up carl9170_handle_mpdu
Christian Lamparter [Mon, 22 Oct 2012 13:01:29 +0000 (15:01 +0200)]
carl9170: split up carl9170_handle_mpdu

carl9170_handle_mpdu is the final part of the
rx path of the driver. It splits the raw data
streams from the device into skb packets and
passes them on to mac80211. As a result of
continuous updates, it grew over the years when
new code was added by the following commits:
- report A-MPDU status
- fix HT peer BA session corruption
- A-MPDU frame type filter
- ...

This patch splits the routine into two stages.
The first stage only deals with the details
about extracting and verifying the data from
the incoming stream. Whereas the second stage
packs it into skbs and passes it on to mac80211.

Reported-by: Javier Lopez <jlopex@cozybit.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: rx path enhancement to derive priv only once
Avinash Patil [Sat, 20 Oct 2012 02:19:21 +0000 (19:19 -0700)]
mwifiex: rx path enhancement to derive priv only once

We derive mwifiex_private structure which is per interface from
received skb's rx_info. Once priv is derived, same priv can be
propagated to other functions instead of callee deriving priv
from rx_info again.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: handle extended supported rates IE for AP
Avinash Patil [Sat, 20 Oct 2012 02:19:20 +0000 (19:19 -0700)]
mwifiex: handle extended supported rates IE for AP

During start_ap handler, some rates come as extended supported
rates IE - part of beacon tail IE. This patch adds support for
parsing them and adding to bss_rates TLV for bss_start command
to firmware.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoRevert "mwifiex: retrieve correct max_power information in reg_notifier handler"
Amitkumar Karwar [Sat, 20 Oct 2012 02:19:19 +0000 (19:19 -0700)]
Revert "mwifiex: retrieve correct max_power information in reg_notifier handler"

This reverts commit 34202e28fe7fc8551313f9a035a8857db83de757

We made "34202ee.." because we didn't support custom regulatory rules
at that time. But now we use our own custom regulatory rules, so it
needs to be changed back.

Also, chan->max_power calculations in cfg80211 were broken. Hence we
started using chan->max_reg_power. Now it has got fixed in
following commit.

commit 5e31fc0815a4e2c72b1b495fe7a0d8f9bfb9e4b4
Author: Stanislaw Gruszka <sgruszka@redhat.com>
Date:   Tue Jul 24 08:35:39 2012 +0200

    wireless: reg: restore previous behaviour of chan->max_power calculations

Hence we will use chan->max_power instead of chan->max_reg_power.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: disable channel filtering for SSID specific scan from user
Amitkumar Karwar [Sat, 20 Oct 2012 02:19:18 +0000 (19:19 -0700)]
mwifiex: disable channel filtering for SSID specific scan from user

If MWIFIEX_DISABLE_CHAN_FILT bit in scan mode bitmap is set,
firmware will turn off the filtering of scan responses from
adjacent channels.

Currently the bit is set only for internal SSID specific scan
performed during association. We will set it for user requested
SSID specific scan as well.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: minor cleanup and a fix in scan semaphore usage
Amitkumar Karwar [Sat, 20 Oct 2012 02:19:17 +0000 (19:19 -0700)]
mwifiex: minor cleanup and a fix in scan semaphore usage

mwifiex_request_scan() takes care of synchronous internal scan
performed by driver during association.
Currently the semaphore acquired for the scan is unnecessarily
released at the end of different paths. Also, failure paths
returning error code other than "-1" are not considered.

We will release it at the end of routine to fix above issues.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: abort scan upon interface down
Amitkumar Karwar [Sat, 20 Oct 2012 02:19:16 +0000 (19:19 -0700)]
mwifiex: abort scan upon interface down

When the interface is down, we will abort scan by calling
cfg80211_scan_done() with abort option. This fixes WARN_ON
triggered by cfg80211 in wdev_cleanup_work().

Driver's internal variables/flags are cleared once we get
response for current scan command. Meanwhile we will block
new scan request from cfg80211.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: use LOW_PRIORITY scan flag provided in scan request
Amitkumar Karwar [Sat, 20 Oct 2012 02:19:15 +0000 (19:19 -0700)]
mwifiex: use LOW_PRIORITY scan flag provided in scan request

We will delay/abort scan operation based on traffic for low
priority scan.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobcma: suspend/resume callbacks should be conditionally compiled on CONFIG_PM_SLEEP
Yuanhan Liu [Tue, 16 Oct 2012 14:59:02 +0000 (22:59 +0800)]
bcma: suspend/resume callbacks should be conditionally compiled on CONFIG_PM_SLEEP

This will fix warnings like following when CONFIG_PM_SLEEP is not set:

        warning: 'xxx_suspend' defined but not used [-Wunused-function]
        warning: 'xxx_resume' defined but not used [-Wunused-function]

Because
SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn)

Only references the callbacks on CONFIG_PM_SLEEP (instead of CONFIG_PM).

Cc: John W. Linville <linville@tuxdriver.com>
Cc: "Rafał Miłecki" <zajec5@gmail.com>
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k: Add new BT profile info A2DP_Voice
Rajkumar Manoharan [Mon, 15 Oct 2012 09:59:55 +0000 (15:29 +0530)]
ath9k: Add new BT profile info A2DP_Voice

When the BT connection is initiated by headset, it's possible that headset
requests to make one A2DP and one Voice connection over the same link.
BT firmware will send a new profile A2DP_Voice in this case. So WLAN
has to take care of this new profile for tuning BTCOEX parameters.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k: adjust duty cycle for FTP profile for AR9565
Rajkumar Manoharan [Mon, 15 Oct 2012 09:59:54 +0000 (15:29 +0530)]
ath9k: adjust duty cycle for FTP profile for AR9565

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k_hw: Set default MCI config for AR9565
Rajkumar Manoharan [Mon, 15 Oct 2012 09:59:53 +0000 (15:29 +0530)]
ath9k_hw: Set default MCI config for AR9565

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k_hw: Configure new switch table for AR9565 BTCOEX
Rajkumar Manoharan [Mon, 15 Oct 2012 09:59:52 +0000 (15:29 +0530)]
ath9k_hw: Configure new switch table for AR9565 BTCOEX

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k_hw: Fix max rx rate drop for AR9565
Rajkumar Manoharan [Mon, 15 Oct 2012 09:59:51 +0000 (15:29 +0530)]
ath9k_hw: Fix max rx rate drop for AR9565

Whenever i_coff of IQ calibration is too high, AR9565 drops max
rx rate to MCS4. Skipping IQ update at this time can avoid this
problem for AR9565.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k_hw: Fix frequent BT rx recovery
Rajkumar Manoharan [Mon, 15 Oct 2012 09:59:50 +0000 (15:29 +0530)]
ath9k_hw: Fix frequent BT rx recovery

While resuming from S3, BT host issues HCI reset command and it
causes BT firmware to busy with security key calculation. At this
movement, WLAN detects MCI hardware error of MCI_CONT_INFO_TIMEOUT
and then it starts the recovery sequence repeatedly. Too many
recovery sequences would exhaust the BT kernel message pool. This
patch imposes a duration between consecutive BT recovery procedure.
Thus it solves BT firmware panic issue reported in AR9565.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k_hw: Disable MCI stat counter by default for AR9565
Rajkumar Manoharan [Mon, 15 Oct 2012 09:59:49 +0000 (15:29 +0530)]
ath9k_hw: Disable MCI stat counter by default for AR9565

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k: turn off RXIQ calibration while re-calibrating radio
Bala Shanmugam [Mon, 15 Oct 2012 09:59:48 +0000 (15:29 +0530)]
ath9k: turn off RXIQ calibration while re-calibrating radio

TXIQ and RXIQ share the same data path to upload the measurement
result, we should turn off RXIQ calibration while re-calibrating radio

Signed-off-by: Bala Shanmugam <bkamatch@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k: Set appropriate bit for AR9565 in btc control register
Bala Shanmugam [Mon, 15 Oct 2012 09:59:47 +0000 (15:29 +0530)]
ath9k: Set appropriate bit for AR9565 in btc control register

Signed-off-by: Bala Shanmugam <bkamatch@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k_hw: Fix selfgen chainmask for 9565
Rajkumar Manoharan [Mon, 15 Oct 2012 09:59:46 +0000 (15:29 +0530)]
ath9k_hw: Fix selfgen chainmask for 9565

Self generated MCI messages is configured to use chain 1. As
ar9565 is 1x1 solution, It can not use Chain 1. Hence fix
Chain 1 for ar9462 alone. Not doing so, could affect WLAN
connectivity in ar9565 as LNA sharing is not informed by BT.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k_hw: Enable OSLA hw fix for AR9565
Rajkumar Manoharan [Mon, 15 Oct 2012 09:59:45 +0000 (15:29 +0530)]
ath9k_hw: Enable OSLA hw fix for AR9565

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k: adjust WLAN and BT concurrent transmission
Rajkumar Manoharan [Fri, 12 Oct 2012 08:37:25 +0000 (14:07 +0530)]
ath9k: adjust WLAN and BT concurrent transmission

The simulataneous transmission of both WLAN and BT might cause
increase in power levels. To avoid regulatory violation, WLAN tx
power will be adjusted according to BT power index based on avaliability
of BT scheduling messages. WLAN tx power reduction might affect its
performance. So WLAN tx power is only be lowered when the signal strength
is good enough. Otherwise concurrent tx will be disabled and WLAN uses
it default power levels. Also concurrent tx is disabled whenever WLAN is
moving to off-channel which might be used by BT.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k: fill channel mode in caldata
Rajkumar Manoharan [Fri, 12 Oct 2012 08:37:24 +0000 (14:07 +0530)]
ath9k: fill channel mode in caldata

It is useful to have channel mode in caldata to find out
whether operaing channel is in HT40/20 when we are currently
on offchannel. It will be used by BTCOEX to enable/disable
concurrent tx mechanism later.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k: Add concurrent WLAN and BT tx support for MCI based chips
Rajkumar Manoharan [Fri, 12 Oct 2012 08:37:23 +0000 (14:07 +0530)]
ath9k: Add concurrent WLAN and BT tx support for MCI based chips

This feature enables both WLAN and BT can transmit simultaneously
by setting WLAN and BT to equal priorities. Whenever both are
transmitting, it might violate regulatory power limits. To avoid
regulatory violation, WLAN tx power will be adjusted according to BT
power index based on avaliability of BT scheduling message. If the
combined power exceeds threshold, BT transmission will be held off.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k: Send WLAN channel info to BT
Rajkumar Manoharan [Fri, 12 Oct 2012 08:37:22 +0000 (14:07 +0530)]
ath9k: Send WLAN channel info to BT

WLAN updates channel bitmap when associated and disassociated. Channel
bitmap will reflect whare are the channels used or affected by WLAN and
BT should avoid using those. Not doing so, could affect BT traffic
as both WLAN and BT is operating on same channel.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k: Advertize beacon_int_infra_match
Mohammed Shafi Shajakhan [Mon, 8 Oct 2012 16:00:54 +0000 (21:30 +0530)]
ath9k: Advertize beacon_int_infra_match

Currently ath9k need to have beacon interval matched
between STA mode and beaconing mode. Advertize this
through interface combinations.

Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k_htc: Remove interface combination specific checks
Mohammed Shafi Shajakhan [Mon, 8 Oct 2012 16:00:53 +0000 (21:30 +0530)]
ath9k_htc: Remove interface combination specific checks

Once the driver advertizes interface combination logic
based on its firmware/hardware limitation, cfg80211
takes care of all the necessary logic such as maximum
beaconing vifs, standlone interface etc.

Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k_htc: Advertise interface combinations supported
Mohammed Shafi Shajakhan [Mon, 8 Oct 2012 16:00:52 +0000 (21:30 +0530)]
ath9k_htc: Advertise interface combinations supported

This will allow us to create virtual interface the driver supports.
Also this ensures multivif support and limitation advertised
by the driver is taken care in cfg80211 itself.

Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k: Ensure we set FTP_STOMP_LOW weight when WLAN is idle
Mohammed Shafi Shajakhan [Mon, 8 Oct 2012 16:00:51 +0000 (21:30 +0530)]
ath9k: Ensure we set FTP_STOMP_LOW weight when WLAN is idle

When WLAN is idle ensure we downgrade to FTP_STOMP_LOW weight
(from STOMP_LOW) to provide more bandwidth for BT FTP profile.
WLAN's idleness can be estimated by taking into account of the
rx data packets and just ignore beacons, qos nullfunc etc.

Also update bt_wait_time even if the chip is in NETWORK SLEEP
mode. This should help BT throughput when WLAN is idle.

Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agocarl9170: fix spurious transmissions in sniffer mode
Christian Lamparter [Tue, 11 Sep 2012 21:18:34 +0000 (23:18 +0200)]
carl9170: fix spurious transmissions in sniffer mode

Several people have complained about an unusual
and undocumented feature of the AR9170 hardware:

In siffer mode, the hardware generates spurious
ACK frames for every received frame... even
broadcasts.

The reason for this malfunction is unknown:
<http://marc.info/?l=linux-wireless&m=134517238506033>
But there's a workaround: Instead of the special
sniffer mode, the hardware will be put into
station mode and all rx filters are disabled.

Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reported-by: Marco Fonseca <marco@tampabay.rr.com>
Reported-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoMerge tag 'nfc-next-3.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo...
John W. Linville [Mon, 29 Oct 2012 18:52:37 +0000 (14:52 -0400)]
Merge tag 'nfc-next-3.8-1' of git://git./linux/kernel/git/sameo/nfc-3.0

This is the first NFC pull request for 3.8

With this one we have:

- pn544 p2p support.
- pn544 physical and HCI layers separation. We are getting the pn544 driver
  ready to support non i2c physical layers.
- LLCP SNL (Service Name Lookup). This is the NFC p2p service discovery
  protocol.
- LLCP datagram sockets (connection less) support.
- IDR library usage for NFC devices indexes assignement.
- NFC netlink extension for setting and getting LLCP link characteristics.
- Various code style fixes and cleanups spread over the pn533, LLCP, HCI and
  pn544 code.

12 years agoMerge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac802...
John W. Linville [Mon, 29 Oct 2012 18:52:04 +0000 (14:52 -0400)]
Merge branch 'for-john' of git://git./linux/kernel/git/jberg/mac80211-next

12 years agoNFC: Extend netlink interface for LTO, RW, and MIUX parameters support
Thierry Escande [Wed, 17 Oct 2012 12:43:39 +0000 (14:43 +0200)]
NFC: Extend netlink interface for LTO, RW, and MIUX parameters support

NFC_CMD_LLC_GET_PARAMS: request LTO, RW, and MIUX parameters for a device

NFC_CMD_LLC_SET_PARAMS: set one or more of LTO, RW, and MIUX parameters for
a device. LTO must be set before the link is up otherwise -EINPROGRESS is
returned. RW and MIUX can be set at anytime and will be passed in subsequent
CONNECT and CC messages. If one of the passed parameters is wrong none is
set and -EINVAL is returned.

Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Purge LLCP socket Tx queues when being disconnected
Samuel Ortiz [Fri, 26 Oct 2012 16:20:10 +0000 (18:20 +0200)]
NFC: Purge LLCP socket Tx queues when being disconnected

The Tx queues are no longer valid when we receive a disconnection or when
the LLCP link goes down. In the later case we also purge the entire local
Tx queue.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Remove CONFIG_EXPERIMENTAL from the NCI Makefile
Kees Cook [Tue, 23 Oct 2012 20:04:11 +0000 (13:04 -0700)]
NFC: Remove CONFIG_EXPERIMENTAL from the NCI Makefile

This config item has not carried much meaning for a while now and is
almost always enabled by default. As agreed during the Linux kernel
summit, remove it.

Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Remove CONFIG_EXPERIMENTAL from the LLCP Makefile
Kees Cook [Tue, 23 Oct 2012 20:04:10 +0000 (13:04 -0700)]
NFC: Remove CONFIG_EXPERIMENTAL from the LLCP Makefile

This config item has not carried much meaning for a while now and is
almost always enabled by default. As agreed during the Linux kernel
summit, remove it.

Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Remove CONFIG_EXPERIMENTAL
Kees Cook [Tue, 23 Oct 2012 20:04:09 +0000 (13:04 -0700)]
NFC: Remove CONFIG_EXPERIMENTAL

This config item has not carried much meaning for a while now and is
almost always enabled by default. As agreed during the Linux kernel
summit, remove it.

Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Fix some code style and whitespace issues
Szymon Janc [Wed, 17 Oct 2012 13:23:39 +0000 (15:23 +0200)]
NFC: Fix some code style and whitespace issues

Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Use IDR library to assing NFC devices IDs
Samuel Ortiz [Mon, 22 Oct 2012 13:57:58 +0000 (15:57 +0200)]
NFC: Use IDR library to assing NFC devices IDs

As a consequence the NFC device IDs won't be increasing all the time,
as IDR provides the first available ID.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: pn533: Remove unused arg parameter
Waldemar Rymarkiewicz [Thu, 11 Oct 2012 12:04:01 +0000 (14:04 +0200)]
NFC: pn533: Remove unused arg parameter

Get rid of unused arg param in pn533_init_target_complete and
in pn533_start_poll_complete.

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: pn533: Fix in/out frame buffer allocation
Waldemar Rymarkiewicz [Thu, 11 Oct 2012 12:03:58 +0000 (14:03 +0200)]
NFC: pn533: Fix in/out frame buffer allocation

Max frame size should be 264 bytes as per spec and not limited to
endpoint MaxPacketSize which is 64 in my case (acr122 reader).

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Return NULL when no LLCP socket for a dsap,ssap couple is found
Samuel Ortiz [Tue, 16 Oct 2012 19:15:59 +0000 (21:15 +0200)]
NFC: Return NULL when no LLCP socket for a dsap,ssap couple is found

The previous code was always returning the last socket from the
LLCP socket list.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Implement LLCP connection less Tx path
Samuel Ortiz [Tue, 16 Oct 2012 13:04:10 +0000 (15:04 +0200)]
NFC: Implement LLCP connection less Tx path

It simply involves getting the client dsap and ssap and calling the UI
frame building and sending routine.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: UI frame sending routine implementation
Samuel Ortiz [Tue, 16 Oct 2012 13:01:40 +0000 (15:01 +0200)]
NFC: UI frame sending routine implementation

UI frames still need to follow the MIU rule, and they need to use the
client passed dsap as the listening socket dsap is stuck on SDP.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Forward LLCP datagrams to userspace
Samuel Ortiz [Mon, 15 Oct 2012 15:44:44 +0000 (17:44 +0200)]
NFC: Forward LLCP datagrams to userspace

With connection less PDUs we have to send the SSAP and DSAP as well.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Handle LLCP UI frames
Samuel Ortiz [Mon, 15 Oct 2012 14:14:37 +0000 (16:14 +0200)]
NFC: Handle LLCP UI frames

UI (Unnumbered Information) frames are used for sending data over
connection less links.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Keep connection less bound sockets alive when DEP link goes down
Samuel Ortiz [Mon, 15 Oct 2012 13:09:52 +0000 (15:09 +0200)]
NFC: Keep connection less bound sockets alive when DEP link goes down

When DEP goes down, bound cl sockets can be kept alive as there is no
reason to kill a connection less server socket because the LLCP link
went down.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Check for connection less sockets when looking for a service name
Samuel Ortiz [Mon, 15 Oct 2012 13:08:29 +0000 (15:08 +0200)]
NFC: Check for connection less sockets when looking for a service name

Connection less server sockets will be in BOUND state, not LISTEN.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Reserve LLCP ssap when replying to an SNL frame
Samuel Ortiz [Mon, 15 Oct 2012 12:28:13 +0000 (14:28 +0200)]
NFC: Reserve LLCP ssap when replying to an SNL frame

Replying to an SNL (Service Name Lookup) means that the other end of
the link can now rely on our answer (Which is an ssap) and thus we have
to reserve it.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Fix sparse warnings due to missing static
Arron Wang [Mon, 8 Oct 2012 06:54:39 +0000 (14:54 +0800)]
NFC: Fix sparse warnings due to missing static

Signed-off-by: Arron Wang <arron.wang@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Fix style issues with logical operations
Szymon Janc [Thu, 4 Oct 2012 13:15:51 +0000 (15:15 +0200)]
NFC: Fix style issues with logical operations

Logical continuations should be on the previous line.

Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Fix not propagating return code in nfc_hci_clear_all_pipes
Szymon Janc [Thu, 4 Oct 2012 13:15:49 +0000 (15:15 +0200)]
NFC: Fix not propagating return code in nfc_hci_clear_all_pipes

Return code from nfc_hci_execute_cmd was not propagated to caller.

Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Small nfc_hci_create_pipe refactoring
Szymon Janc [Thu, 4 Oct 2012 13:15:48 +0000 (15:15 +0200)]
NFC: Small nfc_hci_create_pipe refactoring

Check for error and return if any. This makes it easier to see what is
a 'positive' function flow.

Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Remove unneeded LLCP function return calls
Szymon Janc [Thu, 4 Oct 2012 13:15:47 +0000 (15:15 +0200)]
NFC: Remove unneeded LLCP function return calls

There is no need for return statement at the end of function returning
void.

Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Remove not needed local variable in nci_set_local_general_bytes
Szymon Janc [Thu, 4 Oct 2012 13:15:46 +0000 (15:15 +0200)]
NFC: Remove not needed local variable in nci_set_local_general_bytes

No need for local rc variable as result of nci_request can be returned
directly.

Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Use NFC_MAX_GT_LEN to check len in nci_set_local_general_bytes
Szymon Janc [Thu, 4 Oct 2012 13:15:45 +0000 (15:15 +0200)]
NFC: Use NFC_MAX_GT_LEN to check len in nci_set_local_general_bytes

local_gb is of size NFC_MAX_GT_LEN and len is used as index for it.
Check len against this instead of NCI_MAX_PARAM_LEN before accessing
local_gb.

Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Add NFC_ATTR_RF_MODE when sending device netlink properties
Thierry Escande [Fri, 5 Oct 2012 09:19:58 +0000 (11:19 +0200)]
NFC: Add NFC_ATTR_RF_MODE when sending device netlink properties

This is useful when getting devices to know if they're in target or
initiator mode.

Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Set rf_mode to NFC_RF_NONE where necessary
Thierry Escande [Fri, 5 Oct 2012 09:05:45 +0000 (11:05 +0200)]
NFC: Set rf_mode to NFC_RF_NONE where necessary

rf_mode is now set to NFC_RF_NONE when a device gets allocated,
when the link goes down, and when stop polling.

Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Initial SNL support
Samuel Ortiz [Thu, 4 Oct 2012 23:21:47 +0000 (01:21 +0200)]
NFC: Initial SNL support

SNL (Service Name Lookup) allows for LLCP peers to map service names with
SAPs. This is mandatory for connection less support as peers need to get
the right SAPs without sending the CONNECT frame.
Here we only support the Rx part of SNL. The Tx one will be implemented
when supporting connection less LLCP sockets.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Add SNL frame building routine
Samuel Ortiz [Thu, 4 Oct 2012 23:13:24 +0000 (01:13 +0200)]
NFC: Add SNL frame building routine

SNL (Service Name Lookup) frames are used to respond to SNL requests.
This is needed for SDP implementation.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Use llcp_allocate_pdu to build the DISC frames
Samuel Ortiz [Thu, 4 Oct 2012 23:09:07 +0000 (01:09 +0200)]
NFC: Use llcp_allocate_pdu to build the DISC frames

We no longer need to be atomic as this is only called from
llcp_sock_release().

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Avoid falling back to SYMM when sk is NULL
Samuel Ortiz [Thu, 4 Oct 2012 22:37:22 +0000 (00:37 +0200)]
NFC: Avoid falling back to SYMM when sk is NULL

In some cases (SNL, DISC, DM) we need to send an LLCP skbs without
having a sock owning it. I frames are an exception here since
they may be requeued to the llcp_sock queue.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Separate pn544 hci driver in HW dependant and independant parts
Eric Lapuyade [Tue, 2 Oct 2012 16:44:06 +0000 (18:44 +0200)]
NFC: Separate pn544 hci driver in HW dependant and independant parts

The driver now has all HCI stuff isolated in one file, and all the
hardware link specifics in another. Writing a pn544 driver on top of
another hardware link is now just a matter of adding a new file for that
new hardware specifics.

Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: HCI check presence must not fail when driver doesn't support it
Eric Lapuyade [Tue, 2 Oct 2012 15:27:36 +0000 (17:27 +0200)]
NFC: HCI check presence must not fail when driver doesn't support it

When the driver does not support checking the tag is still present, it
must return -EOPNOTSUPP. The NFC Core will then stop asking and not
report a tag lost event to user space.

Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Add pn544 presence check for different targets
Arron Wang [Thu, 27 Sep 2012 09:32:59 +0000 (17:32 +0800)]
NFC: Add pn544 presence check for different targets

Signed-off-by: Arron Wang <arron.wang@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Implement HCI DEP send and receive data
Arron Wang [Thu, 27 Sep 2012 09:32:58 +0000 (17:32 +0800)]
NFC: Implement HCI DEP send and receive data

And implement the corresponding hooks for pn544.

Signed-off-by: Arron Wang <arron.wang@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Implement HCI DEP link up and down
Arron Wang [Thu, 27 Sep 2012 09:32:57 +0000 (17:32 +0800)]
NFC: Implement HCI DEP link up and down

And implement the corresponding hooks for pn544.

Signed-off-by: Arron Wang <arron.wang@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Handle pn544 continue activation
Arron Wang [Thu, 27 Sep 2012 09:32:56 +0000 (17:32 +0800)]
NFC: Handle pn544 continue activation

We need to send continue activation command to allow NFCIP-1
activation when a NFC target has been discovered in type A or
type F reader gate.

Signed-off-by: Arron Wang <arron.wang@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Pass hardware specific HCI event to driver
Arron Wang [Thu, 27 Sep 2012 09:32:55 +0000 (17:32 +0800)]
NFC: Pass hardware specific HCI event to driver

Signed-off-by: Arron Wang <arron.wang@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agoNFC: Set local gb and DEP registries
Arron Wang [Thu, 27 Sep 2012 09:32:54 +0000 (17:32 +0800)]
NFC: Set local gb and DEP registries

Set the local general bytes and default value for NFCIP1
Target/Initiator registries if the protocol is NFC-DEP

Signed-off-by: Arron Wang <arron.wang@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
12 years agomac80211: complete bss_info tracing
Johannes Berg [Wed, 24 Oct 2012 09:38:30 +0000 (11:38 +0200)]
mac80211: complete bss_info tracing

Some fields have been added but were missed in
tracing, add them now.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: use non-atomic bitmap operation for local variable
Johannes Berg [Wed, 24 Oct 2012 12:22:37 +0000 (14:22 +0200)]
mac80211: use non-atomic bitmap operation for local variable

For a local variable there's no need to use the atomic
set_bit() operation, use __set_bit() instead.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: remove duplicate check in ieee80211_rx_mgmt_beacon
Rami Rosen [Thu, 25 Oct 2012 08:16:23 +0000 (10:16 +0200)]
mac80211: remove duplicate check in ieee80211_rx_mgmt_beacon

Remove a duplicate check in ieee80211_rx_mgmt_beacon,
there is no need to make again the same check for the
IEEE80211_HW_PS_NULLFUNC_STACK twice; the two ifs can
be consolidated.

Signed-off-by: Rami Rosen <ramirose@gmail.com>
[reword commit message & break long lines and also
 clean up variable]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agocfg80211: add tracing for P2P Device start/stop
Johannes Berg [Tue, 23 Oct 2012 13:16:50 +0000 (15:16 +0200)]
cfg80211: add tracing for P2P Device start/stop

These were missed due to the tracing work having
started on a kernel that didn't have P2P Device
yet, implement them now.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: expose AES-CMAC subkey calculation
Assaf Krauss [Wed, 1 Aug 2012 12:12:48 +0000 (15:12 +0300)]
mac80211: expose AES-CMAC subkey calculation

Expose a function for the AES-CMAC subkey calculation
to drivers. This is the first step of the AES-CMAC
cipher key setup and may be required for CMAC hardware
offloading.

Signed-off-by: Assaf Krauss <assaf.krauss@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>