irqchip/gic, gic-v3: Prevent GSI to SGI translations

commit 544808f7e21cb9ccdb8f3aa7de594c05b1419061 upstream.

At the moment the GIC IRQ domain translation routine happily converts
ACPI table GSI numbers below 16 to GIC SGIs (Software Generated
Interrupts aka IPIs). On the Devicetree side we explicitly forbid this
translation, actually the function will never return HWIRQs below 16 when
using a DT based domain translation.

We expect SGIs to be handled in the first part of the function, and any
further occurrence should be treated as a firmware bug, so add a check
and print to report this explicitly and avoid lengthy debug sessions.

Fixes: 64b499d8df40 ("irqchip/gic-v3: Configure SGIs as standard interrupts")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220404110842.2882446-1-andre.przywara@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/64: Fix build failure with allyesconfig in book3s_64_entry.S

commit af41d2866f7d75bbb38d487f6ec7770425d70e45 upstream.

Using conditional branches between two files is hasardous,
they may get linked too far from each other.

  arch/powerpc/kvm/book3s_64_entry.o:(.text+0x3ec): relocation truncated
  to fit: R_PPC64_REL14 (stub) against symbol `system_reset_common'
  defined in .text section in arch/powerpc/kernel/head_64.o

Reorganise the code to use non conditional branches.

Fixes: 89d35b239101 ("KVM: PPC: Book3S HV P9: Implement the rest of the P9 path in C")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Avoid odd-looking bne ., use named local labels]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/89cf27bf43ee07a0b2879b9e8e2f5cd6386a3645.1648366338.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irqchip/gic-v4: Wait for GICR_VPENDBASER.Dirty to clear before descheduling

commit af27e41612ec7e5b4783f589b753a7c31a37aac8 upstream.

The way KVM drives GICv4.{0,1} is as follows:
- vcpu_load() makes the VPE resident, instructing the RD to start
  scanning for interrupts
- just before entering the guest, we check that the RD has finished
  scanning and that we can start running the vcpu
- on preemption, we deschedule the VPE by making it invalid on
  the RD

However, we are preemptible between the first two steps. If it so
happens *and* that the RD was still scanning, we nonetheless write
to the GICR_VPENDBASER register while Dirty is set, and bad things
happen (we're in UNPRED land).

This affects both the 4.0 and 4.1 implementations.

Make sure Dirty is cleared before performing the deschedule,
meaning that its_clear_vpend_valid() becomes a sort of full VPE
residency barrier.

Reported-by: Jingyi Wang <wangjingyi11@huawei.com>
Tested-by: Nianyao Tang <tangnianyao@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Fixes: 57e3cebd022f ("KVM: arm64: Delay the polling of the GICR_VPENDBASER.Dirty bit")
Link: https://lore.kernel.org/r/4aae10ba-b39a-5f84-754b-69c2eb0a2c03@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86,static_call: Fix __static_call_return0 for i386

commit 1cd5f059d956e6f614ba6666ecdbcf95db05d5f5 upstream.

Paolo reported that the instruction sequence that is used to replace:

    call __static_call_return0

namely:

    66 66 48 31 c0 data16 data16 xor %rax,%rax

decodes to something else on i386, namely:

    66 66 48 data16 dec %ax
    31 c0 xor    %eax,%eax

Which is a nonsensical sequence that happens to have the same outcome.
*However* an important distinction is that it consists of 2
instructions which is a problem when the thing needs to be overwriten
with a regular call instruction again.

As such, replace the instruction with something that decodes the same
on both i386 and x86_64.

Fixes: 3f2a8fc4b15d ("static_call/x86: Add __static_call_return0()")
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220318204419.GT8939@worktop.programming.kicks-ass.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched: Teach the forced-newidle balancer about CPU affinity limitation.

commit 386ef214c3c6ab111d05e1790e79475363abaa05 upstream.

try_steal_cookie() looks at task_struct::cpus_mask to decide if the
task could be moved to `this' CPU. It ignores that the task might be in
a migration disabled section while not on the CPU. In this case the task
must not be moved otherwise per-CPU assumption are broken.

Use is_cpu_allowed(), as suggested by Peter Zijlstra, to decide if the a
task can be moved.

Fixes: d2dfa17bc7de6 ("sched: Trivial forced-newidle balancer")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/YjNK9El+3fzGmswf@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/bug: Prevent shadowing in __WARN_FLAGS

commit 9ce02f0fc68326dd1f87a0a3a4c6ae7fdd39e6f6 upstream.

The macro __WARN_FLAGS() uses a local variable named "f". This being a
common name, there is a risk of shadowing other variables.

For example, GCC would yield:

| In file included from ./include/linux/bug.h:5,
|                  from ./include/linux/cpumask.h:14,
|                  from ./arch/x86/include/asm/cpumask.h:5,
|                  from ./arch/x86/include/asm/msr.h:11,
|                  from ./arch/x86/include/asm/processor.h:22,
|                  from ./arch/x86/include/asm/timex.h:5,
|                  from ./include/linux/timex.h:65,
|                  from ./include/linux/time32.h:13,
|                  from ./include/linux/time.h:60,
|                  from ./include/linux/stat.h:19,
|                  from ./include/linux/module.h:13,
|                  from virt/lib/irqbypass.mod.c:1:
| ./include/linux/rcupdate.h: In function 'rcu_head_after_call_rcu':
| ./arch/x86/include/asm/bug.h:80:21: warning: declaration of 'f' shadows a parameter [-Wshadow]
|    80 |         __auto_type f = BUGFLAG_WARNING|(flags);                \
|       |                     ^
| ./include/asm-generic/bug.h:106:17: note: in expansion of macro '__WARN_FLAGS'
|   106 |                 __WARN_FLAGS(BUGFLAG_ONCE |                     \
|       |                 ^~~~~~~~~~~~
| ./include/linux/rcupdate.h:1007:9: note: in expansion of macro 'WARN_ON_ONCE'
|  1007 |         WARN_ON_ONCE(func != (rcu_callback_t)~0L);
|       |         ^~~~~~~~~~~~
| In file included from ./include/linux/rbtree.h:24,
|                  from ./include/linux/mm_types.h:11,
|                  from ./include/linux/buildid.h:5,
|                  from ./include/linux/module.h:14,
|                  from virt/lib/irqbypass.mod.c:1:
| ./include/linux/rcupdate.h:1001:62: note: shadowed declaration is here
|  1001 | rcu_head_after_call_rcu(struct rcu_head *rhp, rcu_callback_t f)
|       |                                               ~~~~~~~~~~~~~~~^

For reference, sparse also warns about it, c.f. [1].

This patch renames the variable from f to __flags (with two underscore
prefixes as suggested in the Linux kernel coding style [2]) in order
to prevent collisions.

[1] https://lore.kernel.org/all/CAFGhKbyifH1a+nAMCvWM88TK6fpNPdzFtUXPmRGnnQeePV+1sw@mail.gmail.com/

[2] Linux kernel coding style, section 12) Macros, Enums and RTL,
paragraph 5) namespace collisions when defining local variables in
macros resembling functions
https://www.kernel.org/doc/html/latest/process/coding-style.html#macros-enums-and-rtl

Fixes: bfb1a7c91fb7 ("x86/bug: Merge annotate_reachable() into_BUG_FLAGS() asm")
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20220324023742.106546-1-mailhol.vincent@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Drivers: hv: vmbus: Replace smp_store_mb() with virt_store_mb()

commit eaa03d34535872d29004cb5cf77dc9dec1ba9a25 upstream.

Following the recommendation in Documentation/memory-barriers.txt for
virtual machine guests.

Fixes: 8b6a877c060ed ("Drivers: hv: vmbus: Replace the per-CPU channel lists with a global array of channels")
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Link: https://lore.kernel.org/r/20220328154457.100872-1-parri.andrea@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: don't skip swap entry even if zap_details specified

commit 5abfd71d936a8aefd9f9ccd299dea7a164a5d455 upstream.

Patch series "mm: Rework zap ptes on swap entries", v5.

Patch 1 should fix a long standing bug for zap_pte_range() on
zap_details usage.  The risk is we could have some swap entries skipped
while we should have zapped them.

Migration entries are not the major concern because file backed memory
always zap in the pattern that "first time without page lock, then
re-zap with page lock" hence the 2nd zap will always make sure all
migration entries are already recovered.

However there can be issues with real swap entries got skipped
errornoously.  There's a reproducer provided in commit message of patch
1 for that.

Patch 2-4 are cleanups that are based on patch 1.  After the whole
patchset applied, we should have a very clean view of zap_pte_range().

Only patch 1 needs to be backported to stable if necessary.

This patch (of 4):

The "details" pointer shouldn't be the token to decide whether we should
skip swap entries.

For example, when the callers specified details->zap_mapping==NULL, it
means the user wants to zap all the pages (including COWed pages), then
we need to look into swap entries because there can be private COWed
pages that was swapped out.

Skipping some swap entries when details is non-NULL may lead to wrongly
leaving some of the swap entries while we should have zapped them.

A reproducer of the problem:

===8<===
        #define _GNU_SOURCE         /* See feature_test_macros(7) */
        #include <stdio.h>
        #include <assert.h>
        #include <unistd.h>
        #include <sys/mman.h>
        #include <sys/types.h>

        int page_size;
        int shmem_fd;
        char *buffer;

        void main(void)
        {
                int ret;
                char val;

                page_size = getpagesize();
                shmem_fd = memfd_create("test", 0);
                assert(shmem_fd >= 0);

                ret = ftruncate(shmem_fd, page_size * 2);
                assert(ret == 0);

                buffer = mmap(NULL, page_size * 2, PROT_READ | PROT_WRITE,
                                MAP_PRIVATE, shmem_fd, 0);
                assert(buffer != MAP_FAILED);

                /* Write private page, swap it out */
                buffer[page_size] = 1;
                madvise(buffer, page_size * 2, MADV_PAGEOUT);

                /* This should drop private buffer[page_size] already */
                ret = ftruncate(shmem_fd, page_size);
                assert(ret == 0);
                /* Recover the size */
                ret = ftruncate(shmem_fd, page_size * 2);
                assert(ret == 0);

                /* Re-read the data, it should be all zero */
                val = buffer[page_size];
                if (val == 0)
                        printf("Good\n");
                else
                        printf("BUG\n");
        }
===8<===

We don't need to touch up the pmd path, because pmd never had a issue with
swap entries.  For example, shmem pmd migration will always be split into
pte level, and same to swapping on anonymous.

Add another helper should_zap_cows() so that we can also check whether we
should zap private mappings when there's no page pointer specified.

This patch drops that trick, so we handle swap ptes coherently.  Meanwhile
we should do the same check upon migration entry, hwpoison entry and
genuine swap entries too.

To be explicit, we should still remember to keep the private entries if
even_cows==false, and always zap them when even_cows==true.

The issue seems to exist starting from the initial commit of git.

[peterx@redhat.com: comment tweaks]
Link: https://lkml.kernel.org/r/20220217060746.71256-2-peterx@redhat.com
Link: https://lkml.kernel.org/r/20220217060746.71256-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20220216094810.60572-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20220216094810.60572-2-peterx@redhat.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests: cgroup: Test open-time cgroup namespace usage for migration checks

commit bf35a7879f1dfb0d050fe779168bcf25c7de66f5 upstream.

When a task is writing to an fd opened by a different task, the perm check
should use the cgroup namespace of the latter task. Add a test for it.

Tested-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests: cgroup: Test open-time credential usage for migration checks

commit 613e040e4dc285367bff0f8f75ea59839bc10947 upstream.

When a task is writing to an fd opened by a different task, the perm check
should use the credentials of the latter task. Add a test for it.

Tested-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests: cgroup: Make cg_create() use 0755 for permission instead of 0644

commit b09c2baa56347ae65795350dfcc633dedb1c2970 upstream.

0644 is an odd perm to create a cgroup which is a directory. Use the regular
0755 instead. This is necessary for euid switching test case.

Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ubsan: remove CONFIG_UBSAN_OBJECT_SIZE

commit 69d0db01e210e07fe915e5da91b54a867cda040f upstream.

The object-size sanitizer is redundant to -Warray-bounds, and
inappropriately performs its checks at run-time when all information
needed for the evaluation is available at compile-time, making it quite
difficult to use:

  https://bugzilla.kernel.org/show_bug.cgi?id=214861

With -Warray-bounds almost enabled globally, it doesn't make sense to
keep this around.

Link: https://lkml.kernel.org/r/20211203235346.110809-1-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Tadeusz Struk <tadeusz.struk@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "net/mlx5: Accept devlink user input after driver initialization complete"

This reverts commit 9cc25e8529d567e08da98d11f092b21449763144 which is
commit 64ea2d0e7263b67d8efc93fa1baace041ed36d1e upstream.

This patch was shown to introduce a regression:

  # devlink dev param show pci/0000:24:00.0 name flow_steering_mode
  pci/0000:24:00.0:
    name flow_steering_mode type driver-specific
      values:

  (flow steering mode description is missing beneath "values:")

  # devlink dev param set pci/0000:24:00.0 name flow_steering_mode value smfs cmode runtime
  Segmentation fault (core dumped)

  and also with upstream iproute
  # ./iproute2/devlink/devlink dev param set pci/0000:24:00.0 name flow_steering_mode value smfs cmode runtime
  Configuration mode not supported

Note: Instead of reverting, we could instead also backport commit cf530217408e
("devlink: Notify users when objects are accessible"). However, that makes
changes to core devlink code that I'm not sure are suitable for a stable
backport.

Cc: Leon Romanovsky <leonro@nvidia.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: dann frazier <dann.frazier@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: avoid NULL pointer dereference in kvm_dirty_ring_push

commit 5593473a1e6c743764b08e3b6071cb43b5cfa6c4 upstream.

kvm_vcpu_release() will call kvm_dirty_ring_free(), freeing
ring->dirty_gfns and setting it to NULL.  Afterwards, it calls
kvm_arch_vcpu_destroy().

However, if closing the file descriptor races with KVM_RUN in such away
that vcpu->arch.st.preempted == 0, the following call stack leads to a
NULL pointer dereference in kvm_dirty_run_push():

 mark_page_dirty_in_slot+0x192/0x270 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3171
 kvm_steal_time_set_preempted arch/x86/kvm/x86.c:4600 [inline]
 kvm_arch_vcpu_put+0x34e/0x5b0 arch/x86/kvm/x86.c:4618
 vcpu_put+0x1b/0x70 arch/x86/kvm/../../../virt/kvm/kvm_main.c:211
 vmx_free_vcpu+0xcb/0x130 arch/x86/kvm/vmx/vmx.c:6985
 kvm_arch_vcpu_destroy+0x76/0x290 arch/x86/kvm/x86.c:11219
 kvm_vcpu_destroy arch/x86/kvm/../../../virt/kvm/kvm_main.c:441 [inline]

The fix is to release the dirty page ring after kvm_arch_vcpu_destroy
has run.

Reported-by: Qiuhao Li <qiuhao@sysec.org>
Reported-by: Gaoning Pan <pgn@zju.edu.cn>
Reported-by: Yongkang Jia <kangel@zju.edu.cn>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: Revert "dmaengine: shdma: Fix runtime PM imbalance on error"

commit d143f939a95696d38ff800ada14402fa50ebbd6c upstream.

This reverts commit 455896c53d5b ("dmaengine: shdma: Fix runtime PM
imbalance on error") as the patch wrongly reduced the count on error and
did not bail out. So drop the count by reverting the patch .

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools build: Use $(shell ) instead of `` to get embedded libperl's ccopts

commit 541f695cbcb6932c22638b06e0cbe1d56177e2e9 upstream.

Just like its done for ldopts and for both in tools/perf/Makefile.config.

Using `` to initialize PERL_EMBED_CCOPTS somehow precludes using:

  $(filter-out SOMETHING_TO_FILTER,$(PERL_EMBED_CCOPTS))

And we need to do it to allow for building with versions of clang where
some gcc options selected by distros are not available.

Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # Debian/Selfmade LLVM-14 (x86-64)
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Keeping <john@metanate.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Link: http://lore.kernel.org/lkml/YktYX2OnLtyobRYD@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools build: Filter out options and warnings not supported by clang

commit 41caff459a5b956b3e23ba9ca759dd0629ad3dda upstream.

These make the feature check fail when using clang, so remove them just
like is done in tools/perf/Makefile.config to build perf itself.

Adding -Wno-compound-token-split-by-macro to tools/perf/Makefile.config
when building with clang is also necessary to avoid these warnings
turned into errors (-Werror):

    CC      /tmp/build/perf/util/scripting-engines/trace-event-perl.o
  In file included from util/scripting-engines/trace-event-perl.c:35:
  In file included from /usr/lib64/perl5/CORE/perl.h:4085:
  In file included from /usr/lib64/perl5/CORE/hv.h:659:
  In file included from /usr/lib64/perl5/CORE/hv_func.h:34:
  In file included from /usr/lib64/perl5/CORE/sbox32_hash.h:4:
  /usr/lib64/perl5/CORE/zaphod32_hash.h:150:5: error: '(' and '{' tokens introducing statement expression appear in different macro expansion contexts [-Werror,-Wcompound-token-split-by-macro]
      ZAPHOD32_SCRAMBLE32(state[0],0x9fade23b);
      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  /usr/lib64/perl5/CORE/zaphod32_hash.h:80:38: note: expanded from macro 'ZAPHOD32_SCRAMBLE32'
  #define ZAPHOD32_SCRAMBLE32(v,prime) STMT_START {  \
                                       ^~~~~~~~~~
  /usr/lib64/perl5/CORE/perl.h:737:29: note: expanded from macro 'STMT_START'
  #   define STMT_START   (void)( /* gcc supports "({ STATEMENTS; })" */
                                ^
  /usr/lib64/perl5/CORE/zaphod32_hash.h:150:5: note: '{' token is here
      ZAPHOD32_SCRAMBLE32(state[0],0x9fade23b);
      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  /usr/lib64/perl5/CORE/zaphod32_hash.h:80:49: note: expanded from macro 'ZAPHOD32_SCRAMBLE32'
  #define ZAPHOD32_SCRAMBLE32(v,prime) STMT_START {  \
                                                  ^
  /usr/lib64/perl5/CORE/zaphod32_hash.h:150:5: error: '}' and ')' tokens terminating statement expression appear in different macro expansion contexts [-Werror,-Wcompound-token-split-by-macro]
      ZAPHOD32_SCRAMBLE32(state[0],0x9fade23b);
      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  /usr/lib64/perl5/CORE/zaphod32_hash.h:87:41: note: expanded from macro 'ZAPHOD32_SCRAMBLE32'
      v ^= (v>>23);                       \
                                          ^
  /usr/lib64/perl5/CORE/zaphod32_hash.h:150:5: note: ')' token is here
      ZAPHOD32_SCRAMBLE32(state[0],0x9fade23b);
      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  /usr/lib64/perl5/CORE/zaphod32_hash.h:88:3: note: expanded from macro 'ZAPHOD32_SCRAMBLE32'
  } STMT_END
    ^~~~~~~~
  /usr/lib64/perl5/CORE/perl.h:738:21: note: expanded from macro 'STMT_END'
  #   define STMT_END     )
                          ^

Please refer to the discussion on the Link: tag below, where Nathan
clarifies the situation:

<quote>
acme> And then get to the problems at the end of this message, which seem
acme> similar to the problem described here:
acme>
acme> From  Nathan Chancellor <>
acme> Subject [PATCH] mwifiex: Remove unnecessary braces from HostCmd_SET_SEQ_NO_BSS_INFO
acme>
acme> https://lkml.org/lkml/2020/9/1/135
acme>
acme> So perhaps in this case its better to disable that
acme> -Werror,-Wcompound-token-split-by-macro when building with clang?

Yes, I think that is probably the best solution. As far as I can tell,
at least in this file and context, the warning appears harmless, as the
"create a GNU C statement expression from two different macros" is very
much intentional, based on the presence of PERL_USE_GCC_BRACE_GROUPS.
The warning is fixed in upstream Perl by just avoiding creating GNU C
statement expressions using STMT_START and STMT_END:

  https://github.com/Perl/perl5/issues/18780
  https://github.com/Perl/perl5/pull/18984

If I am reading the source code correctly, an alternative to disabling
the warning would be specifying -DPERL_GCC_BRACE_GROUPS_FORBIDDEN but it
seems like that might end up impacting more than just this site,
according to the issue discussion above.
</quote>

Based-on-a-patch-by: Sedat Dilek <sedat.dilek@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # Debian/Selfmade LLVM-14 (x86-64)
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Keeping <john@metanate.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Link: http://lore.kernel.org/lkml/YkxWcYzph5pC1EK8@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf python: Fix probing for some clang command line options

commit dd6e1fe91cdd52774ca642d1da75b58a86356b56 upstream.

The clang compiler complains about some options even without a source
file being available, while others require one, so use the simple
tools/build/feature/test-hello.c file.

Then check for the "is not supported" string in its output, in addition
to the "unknown argument" already being looked for.

This was noticed when building with clang-13 where -ffat-lto-objects
isn't supported and since we were looking just for "unknown argument"
and not providing a source code to clang, was mistakenly assumed as
being available and not being filtered to set of command line options
provided to clang, leading to a build failure.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Keeping <john@metanate.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Link: http://lore.kernel.org/lkml/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf build: Don't use -ffat-lto-objects in the python feature test when building with clang-13

commit 3a8a0475861a443f02e3a9b57d044fe2a0a99291 upstream.

Using -ffat-lto-objects in the python feature test when building with
clang-13 results in:

  clang-13: error: optimization flag '-ffat-lto-objects' is not supported [-Werror,-Wignored-optimization-argument]
  error: command '/usr/sbin/clang' failed with exit code 1
  cp: cannot stat '/tmp/build/perf/python_ext_build/lib/perf*.so': No such file or directory
  make[2]: *** [Makefile.perf:639: /tmp/build/perf/python/perf.so] Error 1

Noticed when building on a docker.io/library/archlinux:base container.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Keeping <john@metanate.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "nbd: fix possible overflow on 'first_minor' in nbd_dev_add()"

commit 7198bfc2017644c6b92d2ecef9b8b8e0363bb5fd upstream.

This reverts commit 6d35d04a9e18990040e87d2bbf72689252669d54.

Both Gabriel and Borislav report that this commit casues a regression
with nbd:

sysfs: cannot create duplicate filename '/dev/block/43:0'

Revert it before 5.18-rc1 and we'll investigage this separately in
due time.

Link: https://lore.kernel.org/all/YkiJTnFOt9bTv6A2@zn.tnic/
Reported-by: Gabriel L. Somlo <somlo@cmu.edu>
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SUNRPC: Don't call connect() more than once on a TCP socket

commit 89f42494f92f448747bd8a7ab1ae8b5d5520577d upstream.

Avoid socket state races due to repeated calls to ->connect() using the
same socket. If connect() returns 0 due to the connection having
completed, but we are in fact in a closing state, then we may leave the
XPRT_CONNECTING flag set on the transport.

Reported-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Fixes: 3be232f11a3c ("SUNRPC: Prevent immediate close+reconnect")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: mc146818-lib: fix signedness bug in mc146818_get_time()

commit 7372971c1be5b7d4fdd8ad237798bdc1d1d54162 upstream.

The mc146818_get_time() function returns zero on success or negative
a error code on failure.  It needs to be type int.

Fixes: d35786b3a28d ("rtc: mc146818-lib: change return values of mc146818_get_time()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220111071922.GE11243@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/bpf: Fix u8 narrow load checks for bpf_sk_lookup remote_port

commit 3c69611b8926f8e74fcf76bd97ae0e5dafbeb26a upstream.

In commit 9a69e2b385f4 ("bpf: Make remote_port field in struct
bpf_sk_lookup 16-bit wide") ->remote_port field changed from __u32 to
__be16.

However, narrow load tests which exercise 1-byte sized loads from
offsetof(struct bpf_sk_lookup, remote_port) were not adopted to reflect the
change.

As a result, on little-endian we continue testing loads from addresses:

 - (__u8 *)&ctx->remote_port + 3
 - (__u8 *)&ctx->remote_port + 4

which map to the zero padding following the remote_port field, and don't
break the tests because there is no observable change.

While on big-endian, we observe breakage because tests expect to see zeros
for values loaded from:

 - (__u8 *)&ctx->remote_port - 1
 - (__u8 *)&ctx->remote_port - 2

Above addresses map to ->remote_ip6 field, which precedes ->remote_port,
and are populated during the bpf_sk_lookup IPv6 tests.

Unsurprisingly, on s390x we observe:

  #136/38 sk_lookup/narrow access to ctx v4:OK
  #136/39 sk_lookup/narrow access to ctx v6:FAIL

Fix it by removing the checks for 1-byte loads from offsets outside of the
->remote_port field.

Fixes: 9a69e2b385f4 ("bpf: Make remote_port field in struct bpf_sk_lookup 16-bit wide")
Suggested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220319183356.233666-3-jakub@cloudflare.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Make remote_port field in struct bpf_sk_lookup 16-bit wide

commit 9a69e2b385f443f244a7e8b8bcafe5ccfb0866b4 upstream.

remote_port is another case of a BPF context field documented as a 32-bit
value in network byte order for which the BPF context access converter
generates a load of a zero-padded 16-bit integer in network byte order.

First such case was dst_port in bpf_sock which got addressed in commit
4421a582718a ("bpf: Make dst_port field in struct bpf_sock 16-bit wide").

Loading 4-bytes from the remote_port offset and converting the value with
bpf_ntohl() leads to surprising results, as the expected value is shifted
by 16 bits.

Reduce the confusion by splitting the field in two - a 16-bit field holding
a big-endian integer, and a 16-bit zero-padding anonymous field that
follows it.

Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220209184333.654927-2-jakub@cloudflare.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "selftests: net: Add tls config dependency for tls selftests"

commit 20695e9a9fd39103d1b0669470ae74030b7aa196 upstream.

This reverts commit d9142e1cf3bbdaf21337767114ecab26fe702d47.

The test is supposed to run cleanly with TLS is disabled,
to test compatibility with TCP behavior. I can't repro
the failure [1], the problem should be debugged rather
than papered over.

Link: https://lore.kernel.org/all/20220325161203.7000698c@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/
Fixes: d9142e1cf3bb ("selftests: net: Add tls config dependency for tls selftests")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20220328212904.2685395-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/smc: send directly on setting TCP_NODELAY

commit b70a5cc045197aad9c159042621baf3c015f6cc7 upstream.

In commit ea785a1a573b("net/smc: Send directly when
TCP_CORK is cleared"), we don't use delayed work
to implement cork.

This patch use the same algorithm, removes the
delayed work when setting TCP_NODELAY and send
directly in setsockopt(). This also makes the
TCP_NODELAY the same as TCP.

Cc: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: SVM: Allow AVIC support on system w/ physical APIC ID > 255

commit 4a204f7895878363ca8211f50ec610408c8c70aa upstream.

Expand KVM's mask for the AVIC host physical ID to the full 12 bits defined
by the architecture.  The number of bits consumed by hardware is model
specific, e.g. early CPUs ignored bits 11:8, but there is no way for KVM
to enumerate the "true" size.  So, KVM must allow using all bits, else it
risks rejecting completely legal x2APIC IDs on newer CPUs.

This means KVM relies on hardware to not assign x2APIC IDs that exceed the
"true" width of the field, but presumably hardware is smart enough to tie
the width to the max x2APIC ID.  KVM also relies on hardware to support at
least 8 bits, as the legacy xAPIC ID is writable by software.  But, those
assumptions are unavoidable due to the lack of any way to enumerate the
"true" width.

Cc: stable@vger.kernel.org
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Fixes: 44a95dae1d22 ("KVM: x86: Detect and Initialize AVIC support")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20220211000851.185799-1-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[modified due to the conflict caused by the commit 391503528257 ("KVM:
x86: SVM: move avic definitions from AMD's spec to svm.h")]
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: don't use BACO for reset in S3

commit ebc002e3ee78409c42156e62e4e27ad1d09c5a75 upstream.

Seems to cause a reboots or hangs on some systems.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1924
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1953
Fixes: daf8de0874ab5b ("drm/amdgpu: always reset the asic in suspend (v2)")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdkfd: Create file descriptor after client is added to smi_clients list

commit e79a2398e1b2d47060474dca291542368183bc0f upstream.

This ensures userspace cannot prematurely clean-up the client before
it is fully initialised which has been proven to cause issues in the
past.

Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/pmu: Add missing callbacks for Tegra devices

commit 38d4e5cf5b08798f093374e53c2f4609d5382dd5 upstream.

Fixes a crash booting on those platforms with nouveau.

Fixes: 4cdd2450bf73 ("drm/nouveau/pmu/gm200-: use alternate falcon reset sequence")
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.17+
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220322124800.2605463-1-kherbst@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu/vcn: Fix the register setting for vcn1

commit 02fc996d5098f4c3f65bdf6cdb6b28e3f29ba789 upstream.

Correct the code error for setting register UVD_GFX10_ADDR_CONFIG.
Need to use inst_idx, or it only will set VCN0.

Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu/smu10: fix SoC/fclk units in auto mode

commit 2f25d8ce09b7ba5d769c132ba3d4eb84a941d2cb upstream.

SMU takes clock limits in Mhz units.  socclk and fclk were
using 10 khz units in some cases.  Switch to Mhz units.
Fixes higher than required SoC clocks.

Fixes: 97cf32996c46d9 ("drm/amd/pm: Removed fixed clock in auto mode DPM")
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu/display: change pipe policy for DCN 2.1

commit 879791ad8bf3dc5453061cad74776a617b6e3319 upstream.

Fixes crash on MST Hub disconnect.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1849
Fixes: ee2698cf79cc ("drm/amd/display: Changed pipe split policy to allow for multi-display pipe split")
Signed-off-by: Benjamin Marty <info@benjaminmarty.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/panel: ili9341: fix optional regulator handling

commit d14eb80e27795b7b20060f7b151cdfe39722a813 upstream.

If the optional regulator lookup fails, reset the pointer to NULL.
Other functions such as mipi_dbi_poweron_reset_conditional() only do
a NULL pointer check and will otherwise dereference the error pointer.

Fixes: 5a04227326b04c15 ("drm/panel: Add ilitek ili9341 panel driver")
Signed-off-by: Daniel Mack <daniel@zonque.org>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220317225537.826302-1-daniel@zonque.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SUNRPC: Prevent immediate close+reconnect

commit 3be232f11a3cc9b0ef0795e39fa11bdb8e422a06 upstream.

If we have already set up the socket and are waiting for it to connect,
then don't immediately close and retry.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

amd/display: set backlight only if required

commit 4052287a75eb3fc0f487fcc5f768a38bede455c8 upstream.

[Why]
comparing pwm bl values (coverted) with user brightness(converted)
levels in commit_tail leads to continuous setting of backlight via dmub
as they don't to match.
This leads overdrive in queuing of commands to DMCU that sometimes lead
to depending on load on DMCU fw:

"[drm:dc_dmub_srv_wait_idle] *ERROR* Error waiting for DMUB idle: status=3"

[How]
Store last successfully set backlight value and compare with it instead
of pwm reads which is not what we should compare with.

Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbdev: Fix unregistering of framebuffers without device

commit 0f525289ff0ddeb380813bd81e0f9bdaaa1c9078 upstream.

OF framebuffers do not have an underlying device in the Linux
device hierarchy. Do a regular unregister call instead of hot
unplugging such a non-existing device. Fixes a NULL dereference.
An example error message on ppc64le is shown below.

  BUG: Kernel NULL pointer dereference on read at 0x00000060
  Faulting instruction address: 0xc00000000080dfa4
  Oops: Kernel access of bad area, sig: 11 [#1]
  LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
  [...]
  CPU: 2 PID: 139 Comm: systemd-udevd Not tainted 5.17.0-ae085d7f9365 #1
  NIP:  c00000000080dfa4 LR: c00000000080df9c CTR: c000000000797430
  REGS: c000000004132fe0 TRAP: 0300   Not tainted  (5.17.0-ae085d7f9365)
  MSR:  8000000002009033 <SF,VEC,EE,ME,IR,DR,RI,LE>  CR: 28228282  XER: 20000000
  CFAR: c00000000000c80c DAR: 0000000000000060 DSISR: 40000000 IRQMASK: 0
  GPR00: c00000000080df9c c000000004133280 c00000000169d200 0000000000000029
  GPR04: 00000000ffffefff c000000004132f90 c000000004132f88 0000000000000000
  GPR08: c0000000015658f8 c0000000015cd200 c0000000014f57d0 0000000048228283
  GPR12: 0000000000000000 c00000003fffe300 0000000020000000 0000000000000000
  GPR16: 0000000000000000 0000000113fc4a40 0000000000000005 0000000113fcfb80
  GPR20: 000001000f7283b0 0000000000000000 c000000000e4a588 c000000000e4a5b0
  GPR24: 0000000000000001 00000000000a0000 c008000000db0168 c0000000021f6ec0
  GPR28: c0000000016d65a8 c000000004b36460 0000000000000000 c0000000016d64b0
  NIP [c00000000080dfa4] do_remove_conflicting_framebuffers+0x184/0x1d0
  [c000000004133280] [c00000000080df9c] do_remove_conflicting_framebuffers+0x17c/0x1d0 (unreliable)
  [c000000004133350] [c00000000080e4d0] remove_conflicting_framebuffers+0x60/0x150
  [c0000000041333a0] [c00000000080e6f4] remove_conflicting_pci_framebuffers+0x134/0x1b0
  [c000000004133450] [c008000000e70438] drm_aperture_remove_conflicting_pci_framebuffers+0x90/0x100 [drm]
  [c000000004133490] [c008000000da0ce4] bochs_pci_probe+0x6c/0xa64 [bochs]
  [...]
  [c000000004133db0] [c00000000002aaa0] system_call_exception+0x170/0x2d0
  [c000000004133e10] [c00000000000c3cc] system_call_common+0xec/0x250

The bug [1] was introduced by commit 27599aacbaef ("fbdev: Hot-unplug
firmware fb devices on forced removal"). Most firmware framebuffers
have an underlying platform device, which can be hot-unplugged
before loading the native graphics driver. OF framebuffers do not
(yet) have that device. Fix the code by unregistering the framebuffer
as before without a hot unplug.

Tested with 5.17 on qemu ppc64le emulation.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 27599aacbaef ("fbdev: Hot-unplug firmware fb devices on forced removal")
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Cc: Zack Rusin <zackr@vmware.com>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: stable@vger.kernel.org # v5.11+
Cc: Helge Deller <deller@gmx.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Zheyu Ma <zheyuma97@gmail.com>
Cc: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Link: https://lore.kernel.org/all/YkHXO6LGHAN0p1pq@debian/
Link: https://patchwork.freedesktop.org/patch/msgid/20220404194402.29974-1-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irqchip/gic-v3: Fix GICR_CTLR.RWP polling

commit 0df6664531a12cdd8fc873f0cac0dcb40243d3e9 upstream.

It turns out that our polling of RWP is totally wrong when checking
for it in the redistributors, as we test the *distributor* bit index,
whereas it is a different bit number in the RDs... Oopsie boo.

This is embarassing. Not only because it is wrong, but also because
it took *8 years* to notice the blunder...

Just fix the damn thing.

Fixes: 021f653791ad ("irqchip: gic-v3: Initial support for GICv3")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/20220315165034.794482-2-maz@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/core: Inherit event_caps

commit e3265a4386428d3d157d9565bb520aabff8b4bf0 upstream.

It was reported that some perf event setup can make fork failed on
ARM64.  It was the case of a group of mixed hw and sw events and it
failed in perf_event_init_task() due to armpmu_event_init().

The ARM PMU code checks if all the events in a group belong to the
same PMU except for software events.  But it didn't set the event_caps
of inherited events and no longer identify them as software events.
Therefore the test failed in a child process.

A simple reproducer is:

  $ perf stat -e '{cycles,cs,instructions}' perf bench sched messaging
  # Running 'sched/messaging' benchmark:
  perf: fork(): Invalid argument

The perf stat was fine but the perf bench failed in fork().  Let's
inherit the event caps from the parent.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20220328200112.457740-1-namhyung@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf: qcom_l2_pmu: fix an incorrect NULL check on list iterator

commit 2012a9e279013933885983cbe0a5fe828052563b upstream.

The bug is here:
return cluster;

The list iterator value 'cluster' will *always* be set and non-NULL
by list_for_each_entry(), so it is incorrect to assume that the
iterator value will be NULL if the list is empty or no element
is found.

To fix the bug, return 'cluster' when found, otherwise return NULL.

Cc: stable@vger.kernel.org
Fixes: 21bdbb7102ed ("perf: add qcom l2 cache perf events driver")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Link: https://lore.kernel.org/r/20220327055733.4070-1-xiam0nd.tong@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ata: sata_dwc_460ex: Fix crash due to OOB write

commit 7aa8104a554713b685db729e66511b93d989dd6a upstream.

the driver uses libata's "tag" values from in various arrays.
Since the mentioned patch bumped the ATA_TAG_INTERNAL to 32,
the value of the SATA_DWC_QCMD_MAX needs to account for that.

Otherwise ATA_TAG_INTERNAL usage cause similar crashes like
this as reported by Tice Rex on the OpenWrt Forum and
reproduced (with symbols) here:

| BUG: Kernel NULL pointer dereference at 0x00000000
| Faulting instruction address: 0xc03ed4b8
| Oops: Kernel access of bad area, sig: 11 [#1]
| BE PAGE_SIZE=4K PowerPC 44x Platform
| CPU: 0 PID: 362 Comm: scsi_eh_1 Not tainted 5.4.163 #0
| NIP:  c03ed4b8 LR: c03d27e8 CTR: c03ed36c
| REGS: cfa59950 TRAP: 0300   Not tainted  (5.4.163)
| MSR:  00021000 <CE,ME>  CR: 42000222  XER: 00000000
| DEAR: 00000000 ESR: 00000000
| GPR00: c03d27e8 cfa59a08 cfa55fe0 00000000 0fa46bc0 [...]
| [..]
| NIP [c03ed4b8] sata_dwc_qc_issue+0x14c/0x254
| LR [c03d27e8] ata_qc_issue+0x1c8/0x2dc
| Call Trace:
| [cfa59a08] [c003f4e0] __cancel_work_timer+0x124/0x194 (unreliable)
| [cfa59a78] [c03d27e8] ata_qc_issue+0x1c8/0x2dc
| [cfa59a98] [c03d2b3c] ata_exec_internal_sg+0x240/0x524
| [cfa59b08] [c03d2e98] ata_exec_internal+0x78/0xe0
| [cfa59b58] [c03d30fc] ata_read_log_page.part.38+0x1dc/0x204
| [cfa59bc8] [c03d324c] ata_identify_page_supported+0x68/0x130
| [...]

This is because sata_dwc_dma_xfer_complete() NULLs the
dma_pending's next neighbour "chan" (a *dma_chan struct) in
this '32' case right here (line ~735):
> hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_NONE;

Then the next time, a dma gets issued; dma_dwc_xfer_setup() passes
the NULL'd hsdevp->chan to the dmaengine_slave_config() which then
causes the crash.

With this patch, SATA_DWC_QCMD_MAX is now set to ATA_MAX_QUEUE + 1.
This avoids the OOB. But please note, there was a worthwhile discussion
on what ATA_TAG_INTERNAL and ATA_MAX_QUEUE is. And why there should not
be a "fake" 33 command-long queue size.

Ideally, the dw driver should account for the ATA_TAG_INTERNAL.
In Damien Le Moal's words: "... having looked at the driver, it
is a bigger change than just faking a 33rd "tag" that is in fact
not a command tag at all."

Fixes: 28361c403683c ("libata: add extra internal command")
Cc: stable@kernel.org # 4.18+
BugLink: https://github.com/openwrt/openwrt/issues/9505
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/x86/intel: Don't extend the pseudo-encoding to GP counters

commit 4a263bf331c512849062805ef1b4ac40301a9829 upstream.

The INST_RETIRED.PREC_DIST event (0x0100) doesn't count on SPR.
perf stat -e cpu/event=0xc0,umask=0x0/,cpu/event=0x0,umask=0x1/ -C0

 Performance counter stats for 'CPU(s) 0':

           607,246      cpu/event=0xc0,umask=0x0/
                 0      cpu/event=0x0,umask=0x1/

The encoding for INST_RETIRED.PREC_DIST is pseudo-encoding, which
doesn't work on the generic counters. However, current perf extends its
mask to the generic counters.

The pseudo event-code for a fixed counter must be 0x00. Check and avoid
extending the mask for the fixed counter event which using the
pseudo-encoding, e.g., ref-cycles and PREC_DIST event.

With the patch,
perf stat -e cpu/event=0xc0,umask=0x0/,cpu/event=0x0,umask=0x1/ -C0

 Performance counter stats for 'CPU(s) 0':

           583,184      cpu/event=0xc0,umask=0x0/
           583,048      cpu/event=0x0,umask=0x1/

Fixes: 2de71ee153ef ("perf/x86/intel: Fix ICL/SPR INST_RETIRED.PREC_DIST encodings")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1648482543-14923-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm/tlb: Revert retpoline avoidance approach

commit d39268ad24c0fd0665d0c5cf55a7c1a0ebf94766 upstream.

0day reported a regression on a microbenchmark which is intended to
stress the TLB flushing path:

https://lore.kernel.org/all/20220317090415.GE735@xsang-OptiPlex-9020/

It pointed at a commit from Nadav which intended to remove retpoline
overhead in the TLB flushing path by taking the 'cond'-ition in
on_each_cpu_cond_mask(), pre-calculating it, and incorporating it into
'cpumask'.  That allowed the code to use a bunch of earlier direct
calls instead of later indirect calls that need a retpoline.

But, in practice, threads can go idle (and into lazy TLB mode where
they don't need to flush their TLB) between the early and late calls.
It works in this direction and not in the other because TLB-flushing
threads tend to hold mmap_lock for write.  Contention on that lock
causes threads to _go_ idle right in this early/late window.

There was not any performance data in the original commit specific
to the retpoline overhead.  I did a few tests on a system with
retpolines:

https://lore.kernel.org/all/dd8be93c-ded6-b962-50d4-96b1c3afb2b7@intel.com/

which showed a possible small win.  But, that small win pales in
comparison with the bigger loss induced on non-retpoline systems.

Revert the patch that removed the retpolines.  This was not a
clean revert, but it was self-contained enough not to be too painful.

Fixes: 6035152d8eeb ("x86/mm/tlb: Open-code on_each_cpu_cond_mask() for tlb_is_not_lazy()")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Nadav Amit <namit@vmware.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/164874672286.389.7021457716635788197.tip-bot2@tip-bot2
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/msi: Fix msi message data shadow struct

commit 59b18a1e65b7a2134814106d0860010e10babe18 upstream.

The x86 MSI message data is 32 bits in total and is either in
compatibility or remappable format, see Intel Virtualization Technology
for Directed I/O, section 5.1.2.

Fixes: 6285aa50736 ("x86/msi: Provide msi message shadow structs")
Co-developed-by: Adrian-Ken Rueegsegger <ken@codelabs.ch>
Signed-off-by: Adrian-Ken Rueegsegger <ken@codelabs.ch>
Signed-off-by: Reto Buerki <reet@codelabs.ch>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220407110647.67372-1-reet@codelabs.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: Restrict usage of GPIO chip irq members before initialization

commit 5467801f1fcbdc46bc7298a84dbf3ca1ff2a7320 upstream.

GPIO chip irq members are exposed before they could be completely
initialized and this leads to race conditions.

One such issue was observed for the gc->irq.domain variable which
was accessed through the I2C interface in gpiochip_to_irq() before
it could be initialized by gpiochip_add_irqchip(). This resulted in
Kernel NULL pointer dereference.

Following are the logs for reference :-

kernel: Call Trace:
kernel:  gpiod_to_irq+0x53/0x70
kernel:  acpi_dev_gpio_irq_get_by+0x113/0x1f0
kernel:  i2c_acpi_get_irq+0xc0/0xd0
kernel:  i2c_device_probe+0x28a/0x2a0
kernel:  really_probe+0xf2/0x460
kernel: RIP: 0010:gpiochip_to_irq+0x47/0xc0

To avoid such scenarios, restrict usage of GPIO chip irq members before
they are completely initialized.

Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com>
Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/hfi1: Fix use-after-free bug for mm struct

commit 2bbac98d0930e8161b1957dc0ec99de39ade1b3c upstream.

Under certain conditions, such as MPI_Abort, the hfi1 cleanup code may
represent the last reference held on the task mm.
hfi1_mmu_rb_unregister() then drops the last reference and the mm is freed
before the final use in hfi1_release_user_pages().  A new task may
allocate the mm structure while it is still being used, resulting in
problems. One manifestation is corruption of the mmap_sem counter leading
to a hang in down_write().  Another is corruption of an mm struct that is
in use by another task.

Fixes: 3d2a9d642512 ("IB/hfi1: Ensure correct mm is used at all times")
Link: https://lore.kernel.org/r/20220408133523.122165.72975.stgit@awfm-01.cornelisnetworks.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Douglas Miller <doug.miller@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: patch_text: Fixup last cpu should be master

commit 31a099dbd91e69fcab55eef4be15ed7a8c984918 upstream.

These patch_text implementations are using stop_machine_cpuslocked
infrastructure with atomic cpu_count. The original idea: When the
master CPU patch_text, the others should wait for it. But current
implementation is using the first CPU as master, which couldn't
guarantee the remaining CPUs are waiting. This patch changes the
last CPU as the master to solve the potential risk.

Fixes: ae16480785de ("arm64: introduce interfaces to hotpatch kernel and module code")
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220407073323.743224-2-guoren@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: core: add dma_map_dev for __spi_unmap_msg()

commit 409543cec01a84610029d6440c480c3fdd7214fb upstream.

Commit b470e10eb43f ("spi: core: add dma_map_dev for dma device") added
dma_map_dev for _spi_map_msg() but missed to add for unmap routine,
__spi_unmap_msg(), so add it now.

Fixes: b470e10eb43f ("spi: core: add dma_map_dev for dma device")
Cc: stable@vger.kernel.org # v5.14+
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20220406132238.1029249-1-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: prevent subvol with swapfile from being deleted

commit 60021bd754c6ca0addc6817994f20290a321d8d6 upstream.

A subvolume with an active swapfile must not be deleted otherwise it
would not be possible to deactivate it.

After the subvolume is deleted, we cannot swapoff the swapfile in this
deleted subvolume because the path is unreachable.  The swapfile is
still active and holding references, the filesystem cannot be unmounted.

The test looks like this:

  mkfs.btrfs -f $dev > /dev/null
  mount $dev $mnt

  btrfs sub create $mnt/subvol
  touch $mnt/subvol/swapfile
  chmod 600 $mnt/subvol/swapfile
  chattr +C $mnt/subvol/swapfile
  dd if=/dev/zero of=$mnt/subvol/swapfile bs=1K count=4096
  mkswap $mnt/subvol/swapfile
  swapon $mnt/subvol/swapfile

  btrfs sub delete $mnt/subvol
  swapoff $mnt/subvol/swapfile  # failed: No such file or directory
  swapoff --all

  unmount $mnt                  # target is busy.

To prevent above issue, we simply check that whether the subvolume
contains any active swapfile, and stop the deleting process.  This
behavior is like snapshot ioctl dealing with a swapfile.

CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Robbie Ko <robbieko@synology.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Kaiwen Hu <kevinhu@synology.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix qgroup reserve overflow the qgroup limit

commit b642b52d0b50f4d398cb4293f64992d0eed2e2ce upstream.

We use extent_changeset->bytes_changed in qgroup_reserve_data() to record
how many bytes we set for EXTENT_QGROUP_RESERVED state. Currently the
bytes_changed is set as "unsigned int", and it will overflow if we try to
fallocate a range larger than 4GiB. The result is we reserve less bytes
and eventually break the qgroup limit.

Unlike regular buffered/direct write, which we use one changeset for
each ordered extent, which can never be larger than 256M.  For
fallocate, we use one changeset for the whole range, thus it no longer
respects the 256M per extent limit, and caused the problem.

The following example test script reproduces the problem:

  $ cat qgroup-overflow.sh
  #!/bin/bash

  DEV=/dev/sdj
  MNT=/mnt/sdj

  mkfs.btrfs -f $DEV
  mount $DEV $MNT

  # Set qgroup limit to 2GiB.
  btrfs quota enable $MNT
  btrfs qgroup limit 2G $MNT

  # Try to fallocate a 3GiB file. This should fail.
  echo
  echo "Try to fallocate a 3GiB file..."
  fallocate -l 3G $MNT/3G.file

  # Try to fallocate a 5GiB file.
  echo
  echo "Try to fallocate a 5GiB file..."
  fallocate -l 5G $MNT/5G.file

  # See we break the qgroup limit.
  echo
  sync
  btrfs qgroup show -r $MNT

  umount $MNT

When running the test:

  $ ./qgroup-overflow.sh
  (...)

  Try to fallocate a 3GiB file...
  fallocate: fallocate failed: Disk quota exceeded

  Try to fallocate a 5GiB file...

  qgroupid         rfer         excl     max_rfer
  --------         ----         ----     --------
  0/5           5.00GiB      5.00GiB      2.00GiB

Since we have no control of how bytes_changed is used, it's better to
set it to u64.

CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Ethan Lien <ethanlien@synology.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/x86/intel: Update the FRONTEND MSR mask on Sapphire Rapids

commit e590928de7547454469693da9bc7ffd562e54b7e upstream.

On Sapphire Rapids, the FRONTEND_RETIRED.MS_FLOWS event requires the
FRONTEND MSR value 0x8. However, the current FRONTEND MSR mask doesn't
support it.

Update intel_spr_extra_regs[] to support it.

Fixes: 61b985e3e775 ("perf/x86/intel: Add perf core PMU support for Sapphire Rapids")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1648482543-14923-2-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation: Restore speculation related MSRs during S3 resume

commit e2a1256b17b16f9b9adf1b6fea56819e7b68e463 upstream.

After resuming from suspend-to-RAM, the MSRs that control CPU's
speculative execution behavior are not being restored on the boot CPU.

These MSRs are used to mitigate speculative execution vulnerabilities.
Not restoring them correctly may leave the CPU vulnerable.  Secondary
CPU's MSRs are correctly being restored at S3 resume by
identify_secondary_cpu().

During S3 resume, restore these MSRs for boot CPU when restoring its
processor state.

Fixes: 772439717dbf ("x86/bugs/intel: Set proper CPU features and setup RDS")
Reported-by: Neelima Krishnan <neelima.krishnan@intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Tested-by: Neelima Krishnan <neelima.krishnan@intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/pm: Save the MSR validity status at context setup

commit 73924ec4d560257004d5b5116b22a3647661e364 upstream.

The mechanism to save/restore MSRs during S3 suspend/resume checks for
the MSR validity during suspend, and only restores the MSR if its a
valid MSR.  This is not optimal, as an invalid MSR will unnecessarily
throw an exception for every suspend cycle.  The more invalid MSRs,
higher the impact will be.

Check and save the MSR validity at setup.  This ensures that only valid
MSRs that are guaranteed to not throw an exception will be attempted
during suspend.

Fixes: 7a9c2dd08ead ("x86/pm: Introduce quirk framework to save/restore extra MSR registers around suspend/resume")
Suggested-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: fix race between timeout flush and removal

commit e677edbcabee849bfdd43f1602bccbecf736a646 upstream.

io_flush_timeouts() assumes the timeout isn't in progress of triggering
or being removed/canceled, so it unconditionally removes it from the
timeout list and attempts to cancel it.

Leave it on the list and let the normal timeout cancelation take care
of it.

Cc: stable@vger.kernel.org # 5.5+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: implement compat handling for IORING_REGISTER_IOWQ_AFF

commit 0f5e4b83b37a96e3643951588ed7176b9b187c0a upstream.

Similarly to the way it is done im mbind syscall.

Cc: stable@vger.kernel.org # 5.14
Fixes: fe76421d1da1dcdb ("io_uring: allow user configurable IO thread CPU affinity")
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: defer splice/tee file validity check until command issue

commit a3e4bc23d5470b2beb7cc42a86b6a3e75b704c15 upstream.

In preparation for not using the file at prep time, defer checking if this
file refers to a valid io_uring instance until issue time.

This also means we can get rid of the cleanup flag for splice and tee.

Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: don't check req->file in io_fsync_prep()

commit ec858afda857e361182ceafc3d2ba2b164b8e889 upstream.

This is a leftover from the really old days where we weren't able to
track and error early if we need a file and it wasn't assigned. Kill
the check.

Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/mempolicy: fix mpol_new leak in shared_policy_replace

commit 4ad099559b00ac01c3726e5c95dc3108ef47d03e upstream.

If mpol_new is allocated but not used in restart loop, mpol_new will be
freed via mpol_put before returning to the caller.  But refcnt is not
initialized yet, so mpol_put could not do the right things and might
leak the unused mpol_new.  This would happen if mempolicy was updated on
the shared shmem file while the sp->lock has been dropped during the
memory allocation.

This issue could be triggered easily with the below code snippet if
there are many processes doing the below work at the same time:

  shmid = shmget((key_t)5566, 1024 * PAGE_SIZE, 0666|IPC_CREAT);
  shm = shmat(shmid, 0, 0);
  loop many times {
    mbind(shm, 1024 * PAGE_SIZE, MPOL_LOCAL, mask, maxnode, 0);
    mbind(shm + 128 * PAGE_SIZE, 128 * PAGE_SIZE, MPOL_DEFAULT, mask,
          maxnode, 0);
  }

Link: https://lkml.kernel.org/r/20220329111416.27954-1-linmiaohe@huawei.com
Fixes: 42288fe366c4 ("mm: mempolicy: Convert shared_policy mutex to spinlock")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: <stable@vger.kernel.org> [3.8]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmmremap.c: avoid pointless invalidate_range_start/end on mremap(old_size=0)

commit 01e67e04c28170c47700c2c226d732bbfedb1ad0 upstream.

If an mremap() syscall with old_size=0 ends up in move_page_tables(), it
will call invalidate_range_start()/invalidate_range_end() unnecessarily,
i.e.  with an empty range.

This causes a WARN in KVM's mmu_notifier.  In the past, empty ranges
have been diagnosed to be off-by-one bugs, hence the WARNing.  Given the
low (so far) number of unique reports, the benefits of detecting more
buggy callers seem to outweigh the cost of having to fix cases such as
this one, where userspace is doing something silly.  In this particular
case, an early return from move_page_tables() is enough to fix the
issue.

Link: https://lkml.kernel.org/r/20220329173155.172439-1-pbonzini@redhat.com
Reported-by: syzbot+6bde52d89cfdf9f61425@syzkaller.appspotmail.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

highmem: fix checks in __kmap_local_sched_{in,out}

commit 66f133ceab7456c789f70a242991ed1b27ba1c3d upstream.

When CONFIG_DEBUG_KMAP_LOCAL is enabled __kmap_local_sched_{in,out} check
that even slots in the tsk->kmap_ctrl.pteval are unmapped.  The slots are
initialized with 0 value, but the check is done with pte_none.  0 pte
however does not necessarily mean that pte_none will return true.  e.g.
on xtensa it returns false, resulting in the following runtime warnings:

 WARNING: CPU: 0 PID: 101 at mm/highmem.c:627 __kmap_local_sched_out+0x51/0x108
 CPU: 0 PID: 101 Comm: touch Not tainted 5.17.0-rc7-00010-gd3a1cdde80d2-dirty #13
 Call Trace:
   dump_stack+0xc/0x40
   __warn+0x8f/0x174
   warn_slowpath_fmt+0x48/0xac
   __kmap_local_sched_out+0x51/0x108
   __schedule+0x71a/0x9c4
   preempt_schedule_irq+0xa0/0xe0
   common_exception_return+0x5c/0x93
   do_wp_page+0x30e/0x330
   handle_mm_fault+0xa70/0xc3c
   do_page_fault+0x1d8/0x3c4
   common_exception+0x7f/0x7f

 WARNING: CPU: 0 PID: 101 at mm/highmem.c:664 __kmap_local_sched_in+0x50/0xe0
 CPU: 0 PID: 101 Comm: touch Tainted: G        W         5.17.0-rc7-00010-gd3a1cdde80d2-dirty #13
 Call Trace:
   dump_stack+0xc/0x40
   __warn+0x8f/0x174
   warn_slowpath_fmt+0x48/0xac
   __kmap_local_sched_in+0x50/0xe0
   finish_task_switch$isra$0+0x1ce/0x2f8
   __schedule+0x86e/0x9c4
   preempt_schedule_irq+0xa0/0xe0
   common_exception_return+0x5c/0x93
   do_wp_page+0x30e/0x330
   handle_mm_fault+0xa70/0xc3c
   do_page_fault+0x1d8/0x3c4
   common_exception+0x7f/0x7f

Fix it by replacing !pte_none(pteval) with pte_val(pteval) != 0.

Link: https://lkml.kernel.org/r/20220403235159.3498065-1-jcmvbkbc@gmail.com
Fixes: 5fbda3ecd14a ("sched: highmem: Store local kmaps in task struct")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lz4: fix LZ4_decompress_safe_partial read out of bound

commit eafc0a02391b7b36617b36c97c4b5d6832cf5e24 upstream.

When partialDecoding, it is EOF if we've either filled the output buffer
or can't proceed with reading an offset for following match.

In some extreme corner cases when compressed data is suitably corrupted,
UAF will occur.  As reported by KASAN [1], LZ4_decompress_safe_partial
may lead to read out of bound problem during decoding.  lz4 upstream has
fixed it [2] and this issue has been disscussed here [3] before.

current decompression routine was ported from lz4 v1.8.3, bumping
lib/lz4 to v1.9.+ is certainly a huge work to be done later, so, we'd
better fix it first.

[1] https://lore.kernel.org/all/000000000000830d1205cf7f0477@google.com/
[2] https://github.com/lz4/lz4/commit/c5d6f8a8be3927c0bec91bcc58667a6cfad244ad#
[3] https://lore.kernel.org/all/CC666AE8-4CA4-4951-B6FB-A2EFDE3AC03B@fb.com/

Link: https://lkml.kernel.org/r/20211111105048.2006070-1-guoxuenan@huawei.com
Reported-by: syzbot+63d688f1d899c588fb71@syzkaller.appspotmail.com
Signed-off-by: Guo Xuenan <guoxuenan@huawei.com>
Reviewed-by: Nick Terrell <terrelln@fb.com>
Acked-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Yann Collet <cyan@fb.com>
Cc: Chengyang Fan <cy.fan@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: core: Fixup support for writeback-cache for eMMC and SD

commit 08ebf903af57cda6d773f3dd1671b64f73b432b8 upstream.

During the card initialization process, the mmc core checks whether the
eMMC/SD card supports an internal writeback-cache and then enables it
inside the card.

Unfortunately, this isn't according to what the mmc core reports to the
upper block layer. Instead, the writeback-cache support with REQ_FLUSH and
REQ_FUA, are being enabled depending on whether the host supports the CMD23
(MMC_CAP_CMD23) and whether an eMMC supports the reliable-write command.

This is wrong and it may also sound awkward. In fact, it's a remnant
from when both eMMC/SD cards didn't have dedicated commands/support to
control the internal writeback-cache. In other words, it was the best we
could do at that point in time.

To fix the problem, but also without breaking backwards compatibility,
let's align the REQ_FLUSH support with whether the writeback-cache became
successfully enabled - for both eMMC and SD cards.

Cc: stable@kernel.org
Fixes: 881d1c25f765 ("mmc: core: Add cache control for eMMC4.5 device")
Fixes: 130206a615a9 ("mmc: core: Add support for cache ctrl for SD cards")
Depends-on: 97fce126e279 ("mmc: block: Issue a cache flush only when it's enabled")
Reviewed-by: Avri Altman <Avri.Altman@wdc.com>
Signed-off-by: Michael Wu <michael@allwinnertech.com>
Link: https://lore.kernel.org/r/20220331073223.106415-1-michael@allwinnertech.com
[Ulf: Re-wrote the commit message]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: renesas_sdhi: don't overwrite TAP settings when HS400 tuning is complete

commit 03e59b1e2f56245163b14c69e0a830c24b1a3a47 upstream.

When HS400 tuning is complete and HS400 is going to be activated, we
have to keep the current number of TAPs and should not overwrite them
with a hardcoded value. This was probably a copy&paste mistake when
upporting HS400 support from the BSP.

Fixes: 26eb2607fa28 ("mmc: renesas_sdhi: add eMMC HS400 mode support")
Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220404114902.12175-1-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: mmci: stm32: correctly check all elements of sg list

commit 0d319dd5a27183b75d984e3dc495248e59f99334 upstream.

Use sg and not data->sg when checking sg list elements. Else only the
first element alignment is checked.
The last element should be checked the same way, for_each_sg already set
sg to sg_next(sg).

Fixes: 46b723dd867d ("mmc: mmci: add stm32 sdmmc variant")
Cc: stable@vger.kernel.org
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Link: https://lore.kernel.org/r/20220317111944.116148-2-yann.gautier@foss.st.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: block: Check for errors after write on SPI

commit 5d435933376962b107bd76970912e7e80247dcc7 upstream.

Introduce a SEND_STATUS check for writes through SPI to not mark
an unsuccessful write as successful.

Since SPI SD/MMC does not have states, after a write, the card will
just hold the line LOW until it is ready again. The driver marks the
write therefore as completed as soon as it reads something other than
all zeroes.
The driver does not distinguish from a card no longer signalling busy
and it being disconnected (and the line being pulled-up by the host).
This lead to writes being marked as successful when disconnecting
a busy card.
Now the card is ensured to be still connected by an additional CMD13,
just like non-SPI is ensured to go back to TRAN state.

While at it and since we already poll for the post-write status anyway,
we might as well check for SPIs error bits (any of them).

The disconnecting card problem is reproducable for me after continuous
write activity and randomly disconnecting, around every 20-50 tries
on SPI DS for some card.

Fixes: 7213d175e3b6f ("MMC/SD card driver learns SPI")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Loehle <cloehle@hyperstone.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/76f6f5d2b35543bab3dfe438f268609c@hyperstone.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "mmc: sdhci-xenon: fix annoying 1.8V regulator warning"

commit 7e2646ed47542123168d43916b84b954532e5386 upstream.

This reverts commit bb32e1987bc55ce1db400faf47d85891da3c9b9f.

Commit 1a3ed0dc3594 ("mmc: sdhci-xenon: fix 1.8v regulator stabilization")
contains proper fix for the issue described in commit bb32e1987bc5 ("mmc:
sdhci-xenon: fix annoying 1.8V regulator warning").

Fixes: 8d876bf472db ("mmc: sdhci-xenon: wait 5ms after set 1.8V signal enable")
Cc: stable@vger.kernel.org # 1a3ed0dc3594 ("mmc: sdhci-xenon: fix 1.8v regulator stabilization")
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Marcin Wojtas <mw@semihalf.com>
Link: https://lore.kernel.org/r/20220318141441.32329-1-pali@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: ufs: ufs-pci: Add support for Intel MTL

commit 4049f7acef3eb37c1ea0df45f3ffc29404f4e708 upstream.

Add PCI ID and callbacks to support Intel Meteor Lake (MTL).

Link: https://lore.kernel.org/r/20220404055038.2208051-1-adrian.hunter@intel.com
Cc: stable@vger.kernel.org # v5.15+
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: mpt3sas: Fix use after free in _scsih_expander_node_remove()

commit 87d663d40801dffc99a5ad3b0188ad3e2b4d1557 upstream.

The function mpt3sas_transport_port_remove() called in
_scsih_expander_node_remove() frees the port field of the sas_expander
structure, leading to the following use-after-free splat from KASAN when
the ioc_info() call following that function is executed (e.g. when doing
rmmod of the driver module):

[ 3479.371167] ==================================================================
[ 3479.378496] BUG: KASAN: use-after-free in _scsih_expander_node_remove+0x710/0x750 [mpt3sas]
[ 3479.386936] Read of size 1 at addr ffff8881c037691c by task rmmod/1531
[ 3479.393524]
[ 3479.395035] CPU: 18 PID: 1531 Comm: rmmod Not tainted 5.17.0-rc8+ #1436
[ 3479.401712] Hardware name: Supermicro Super Server/H12SSL-NT, BIOS 2.1 06/02/2021
[ 3479.409263] Call Trace:
[ 3479.411743]  <TASK>
[ 3479.413875]  dump_stack_lvl+0x45/0x59
[ 3479.417582]  print_address_description.constprop.0+0x1f/0x120
[ 3479.423389]  ? _scsih_expander_node_remove+0x710/0x750 [mpt3sas]
[ 3479.429469]  kasan_report.cold+0x83/0xdf
[ 3479.433438]  ? _scsih_expander_node_remove+0x710/0x750 [mpt3sas]
[ 3479.439514]  _scsih_expander_node_remove+0x710/0x750 [mpt3sas]
[ 3479.445411]  ? _raw_spin_unlock_irqrestore+0x2d/0x40
[ 3479.452032]  scsih_remove+0x525/0xc90 [mpt3sas]
[ 3479.458212]  ? mpt3sas_expander_remove+0x1d0/0x1d0 [mpt3sas]
[ 3479.465529]  ? down_write+0xde/0x150
[ 3479.470746]  ? up_write+0x14d/0x460
[ 3479.475840]  ? kernfs_find_ns+0x137/0x310
[ 3479.481438]  pci_device_remove+0x65/0x110
[ 3479.487013]  __device_release_driver+0x316/0x680
[ 3479.493180]  driver_detach+0x1ec/0x2d0
[ 3479.498499]  bus_remove_driver+0xe7/0x2d0
[ 3479.504081]  pci_unregister_driver+0x26/0x250
[ 3479.510033]  _mpt3sas_exit+0x2b/0x6cf [mpt3sas]
[ 3479.516144]  __x64_sys_delete_module+0x2fd/0x510
[ 3479.522315]  ? free_module+0xaa0/0xaa0
[ 3479.527593]  ? __cond_resched+0x1c/0x90
[ 3479.532951]  ? lockdep_hardirqs_on_prepare+0x273/0x3e0
[ 3479.539607]  ? syscall_enter_from_user_mode+0x21/0x70
[ 3479.546161]  ? trace_hardirqs_on+0x1c/0x110
[ 3479.551828]  do_syscall_64+0x35/0x80
[ 3479.556884]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 3479.563402] RIP: 0033:0x7f1fc482483b
...
[ 3479.943087] ==================================================================

Fix this by introducing the local variable port_id to store the port ID
value before executing mpt3sas_transport_port_remove(). This local variable
is then used in the call to ioc_info() instead of dereferencing the freed
port structure.

Link: https://lore.kernel.org/r/20220322055702.95276-1-damien.lemoal@opensource.wdc.com
Fixes: 7d310f241001 ("scsi: mpt3sas: Get device objects using sas_address & portID")
Cc: stable@vger.kernel.org
Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Add part number for Arm Cortex-A78AE

commit 83bea32ac7ed37bbda58733de61fc9369513f9f9 upstream.

Add the MIDR part number info for the Arm Cortex-A78AE[1] and add it to
spectre-BHB affected list[2].

[1]: https://developer.arm.com/Processors/Cortex-A78AE
[2]: https://developer.arm.com/Arm%20Security%20Center/Spectre-BHB

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: James Morse <james.morse@arm.com>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Link: https://lore.kernel.org/r/20220407091128.8700-1-chanho61.park@samsung.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf session: Remap buf if there is no space for event

[ Upstream commit bc21e74d4775f883ae1f542c1f1dc7205b15d925 ]

If a perf event doesn't fit into remaining buffer space return NULL to
remap buf and fetch the event again.

Keep the logic to error out on inadequate input from fuzzing.

This fixes perf failing on ChromeOS (with 32b userspace):

  $ perf report -v -i perf.data
  ...
  prefetch_event: head=0x1fffff8 event->header_size=0x30, mmap_size=0x2000000: fuzzed or compressed perf.data?
  Error:
  failed to process sample

Fixes: 57fc032ad643ffd0 ("perf session: Avoid infinite loop when seeing invalid header.size")
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Denis Nikitin <denik@chromium.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220330031130.2152327-1-denik@chromium.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf tools: Fix perf's libperf_print callback

[ Upstream commit aeee9dc53ce405d2161f9915f553114e94e5b677 ]

eprintf() does not expect va_list as the type of the 4th parameter.

Use veprintf() because it does.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: 428dab813a56ce94 ("libperf: Merge libperf_set_print() into libperf_init()")
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220408132625.2451452-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf: arm-spe: Fix perf report --mem-mode

[ Upstream commit ffab487052054162b3b6c9c6005777ec6cfcea05 ]

Since commit bb30acae4c4dacfa ("perf report: Bail out --mem-mode if mem
info is not available") "perf mem report" and "perf report --mem-mode"
don't allow opening the file unless one of the events has
PERF_SAMPLE_DATA_SRC set.

SPE doesn't have this set even though synthetic memory data is generated
after it is decoded. Fix this issue by setting DATA_SRC on SPE events.
This has no effect on the data collected because the SPE driver doesn't
do anything with that flag and doesn't generate samples.

Fixes: bb30acae4c4dacfa ("perf report: Bail out --mem-mode if mem info is not available")
Signed-off-by: James Clark <james.clark@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220408144056.1955535-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/omap: Fix regression in probe for NULL pointer dereference

[ Upstream commit 71ff461c3f41f6465434b9e980c01782763e7ad8 ]

Commit 3f6634d997db ("iommu: Use right way to retrieve iommu_ops") started
triggering a NULL pointer dereference for some omap variants:

__iommu_probe_device from probe_iommu_group+0x2c/0x38
probe_iommu_group from bus_for_each_dev+0x74/0xbc
bus_for_each_dev from bus_iommu_probe+0x34/0x2e8
bus_iommu_probe from bus_set_iommu+0x80/0xc8
bus_set_iommu from omap_iommu_init+0x88/0xcc
omap_iommu_init from do_one_initcall+0x44/0x24

This is caused by omap iommu probe returning 0 instead of ERR_PTR(-ENODEV)
as noted by Jason Gunthorpe <jgg@ziepe.ca>.

Looks like the regression already happened with an earlier commit
6785eb9105e3 ("iommu/omap: Convert to probe/release_device() call-backs")
that changed the function return type and missed converting one place.

Cc: Drew Fustini <dfustini@baylibre.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Suman Anna <s-anna@ti.com>
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Fixes: 6785eb9105e3 ("iommu/omap: Convert to probe/release_device() call-backs")
Fixes: 3f6634d997db ("iommu: Use right way to retrieve iommu_ops")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tested-by: Drew Fustini <dfustini@baylibre.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20220331062301.24269-1-tony@atomide.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: svc_tcp_sendmsg() should handle errors from xdr_alloc_bvec()

[ Upstream commit b056fa070814897be32d83b079dbc311375588e7 ]

The allocation is done with GFP_KERNEL, but it could still fail in a low
memory situation.

Fixes: 4a85a6a3320b ("SUNRPC: Handle TCP socket sends with kernel_sendpage() again")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: Handle low memory situations in call_status()

[ Upstream commit 9d82819d5b065348ce623f196bf601028e22ed00 ]

We need to handle ENFILE, ENOBUFS, and ENOMEM, because
xprt_wake_pending_tasks() can be called with any one of these due to
socket creation failures.

Fixes: b61d59fffd3e ("SUNRPC: xs_tcp_connect_worker{4,6}: merge common code")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: Handle ENOMEM in call_transmit_status()

[ Upstream commit d3c15033b240767d0287f1c4a529cbbe2d5ded8a ]

Both call_transmit() and call_bc_transmit() can now return ENOMEM, so
let's make sure that we handle the errors gracefully.

Fixes: 0472e4766049 ("SUNRPC: Convert socket page send code to use iov_iter()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: don't touch scm_fp_list after queueing skb

[ Upstream commit a07211e3001435fe8591b992464cd8d5e3c98c5a ]

It's safer to not touch scm_fp_list after we queued an skb to which it
was assigned, there might be races lurking if we screw subtle sync
guarantees on the io_uring side.

Fixes: 6b06314c47e14 ("io_uring: add file set registration")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: nospec index for tags on files update

[ Upstream commit 34bb77184123ae401100a4d156584f12fa630e5c ]

Don't forget to array_index_nospec() for indexes before updating rsrc
tags in __io_sqe_files_update(), just use already safe and precalculated
index @i.

Fixes: c3bdad0271834 ("io_uring: add generic rsrc update with tags")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: ufshpb: Fix a NULL check on list iterator

[ Upstream commit bfb7789bcbd901caead43861461bc8f334c90d3b ]

The list iterator is always non-NULL so the check 'if (!rgn)' is always
false and the dev_err() is never called. Move the check outside the loop
and determine if 'victim_rgn' is NULL, to fix this bug.

Link: https://lore.kernel.org/r/20220320150733.21824-1-xiam0nd.tong@gmail.com
Fixes: 4b5f49079c52 ("scsi: ufs: ufshpb: L2P map management for HPB read")
Reviewed-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drbd: Fix five use after free bugs in get_initial_state

[ Upstream commit aadb22ba2f656581b2f733deb3a467c48cc618f6 ]

In get_initial_state, it calls notify_initial_state_done(skb,..) if
cb->args[5]==1. If genlmsg_put() failed in notify_initial_state_done(),
the skb will be freed by nlmsg_free(skb).
Then get_initial_state will goto out and the freed skb will be used by
return value skb->len, which is a uaf bug.

What's worse, the same problem goes even further: skb can also be
freed in the notify_*_state_change -> notify_*_state calls below.
Thus 4 additional uaf bugs happened.

My patch lets the problem callee functions: notify_initial_state_done
and notify_*_state_change return an error code if errors happen.
So that the error codes could be propagated and the uaf bugs can be avoid.

v2 reports a compilation warning. This v3 fixed this warning and built
successfully in my local environment with no additional warnings.
v2: https://lore.kernel.org/patchwork/patch/1435218/

Fixes: a29728463b254 ("drbd: Backport the "events2" command")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Support dual-stack sockets in bpf_tcp_check_syncookie

[ Upstream commit 2e8702cc0cfa1080f29fd64003c00a3e24ac38de ]

bpf_tcp_gen_syncookie looks at the IP version in the IP header and
validates the address family of the socket. It supports IPv4 packets in
AF_INET6 dual-stack sockets.

On the other hand, bpf_tcp_check_syncookie looks only at the address
family of the socket, ignoring the real IP version in headers, and
validates only the packet size. This implementation has some drawbacks:

1. Packets are not validated properly, allowing a BPF program to trick
   bpf_tcp_check_syncookie into handling an IPv6 packet on an IPv4
   socket.

2. Dual-stack sockets fail the checks on IPv4 packets. IPv4 clients end
   up receiving a SYNACK with the cookie, but the following ACK gets
   dropped.

This patch fixes these issues by changing the checks in
bpf_tcp_check_syncookie to match the ones in bpf_tcp_gen_syncookie. IP
version from the header is taken into account, and it is validated
properly with address family.

Fixes: 399040847084 ("bpf: add helper to check for a valid SYN cookie")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Arthur Fabre <afabre@cloudflare.com>
Link: https://lore.kernel.org/bpf/20220406124113.2795730-1-maximmi@nvidia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: bcm-qspi: fix MSPI only access with bcm_qspi_exec_mem_op()

[ Upstream commit 2c7d1b281286c46049cd22b43435cecba560edde ]

This fixes case where MSPI controller is used to access spi-nor
flash and BSPI block is not present.

Fixes: 5f195ee7d830 ("spi: bcm-qspi: Implement the spi_mem interface")
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220328142442.7553-1-kdasu.kdev@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qede: confirm skb is allocated before using

[ Upstream commit 4e910dbe36508654a896d5735b318c0b88172570 ]

qede_build_skb() assumes build_skb() always works and goes straight
to skb_reserve(). However, build_skb() can fail under memory pressure.
This results in a kernel panic because the skb to reserve is NULL.

Add a check in case build_skb() failed to allocate and return NULL.

The NULL return is handled correctly in callers to qede_build_skb().

Fixes: 8a8633978b842 ("qede: Add build_skb() support.")
Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phy: mscc-miim: reject clause 45 register accesses

[ Upstream commit 8d90991e5bf7fdb9f264f5f579d18969913054b7 ]

The driver doesn't support clause 45 register access yet, but doesn't
check if the access is a c45 one either. This leads to spurious register
reads and writes. Add the check.

Fixes: 542671fe4d86 ("net: phy: mscc-miim: Add MDIO driver")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sfc: fix using uninitialized xdp tx_queue

[ Upstream commit fb5833d81e4333294add35d3ac7f7f52a7bf107f ]

In some cases, xdp tx_queue can get used before initialization.
1. interface up/down
2. ring buffer size change

When CPU cores are lower than maximum number of channels of sfc driver,
it creates new channels only for XDP.

When an interface is up or ring buffer size is changed, all channels
are initialized.
But xdp channels are always initialized later.
So, the below scenario is possible.
Packets are received to rx queue of normal channels and it is acted
XDP_TX and tx_queue of xdp channels get used.
But these tx_queues are not initialized yet.
If so, TX DMA or queue error occurs.

In order to avoid this problem.
1. initializes xdp tx_queues earlier than other rx_queue in
efx_start_channels().
2. checks whether tx_queue is initialized or not in efx_xdp_tx_buffers().

Splat looks like:
   sfc 0000:08:00.1 enp8s0f1np1: TX queue 10 spurious TX completion id 250
   sfc 0000:08:00.1 enp8s0f1np1: resetting (RECOVER_OR_ALL)
   sfc 0000:08:00.1 enp8s0f1np1: MC command 0x80 inlen 100 failed rc=-22
   (raw=22) arg=789
   sfc 0000:08:00.1 enp8s0f1np1: has been disabled

Fixes: f28100cb9c96 ("sfc: fix lack of XDP TX queues - error XDP TX failed (-22)")
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rxrpc: fix a race in rxrpc_exit_net()

[ Upstream commit 1946014ca3b19be9e485e780e862c375c6f98bad ]

Current code can lead to the following race:

CPU0                                                 CPU1

rxrpc_exit_net()
                                                     rxrpc_peer_keepalive_worker()
                                                       if (rxnet->live)

  rxnet->live = false;
  del_timer_sync(&rxnet->peer_keepalive_timer);

                                                             timer_reduce(&rxnet->peer_keepalive_timer, jiffies + delay);

  cancel_work_sync(&rxnet->peer_keepalive_work);

rxrpc_exit_net() exits while peer_keepalive_timer is still armed,
leading to use-after-free.

syzbot report was:

ODEBUG: free active (active state 0) object type: timer_list hint: rxrpc_peer_keepalive_timeout+0x0/0xb0
WARNING: CPU: 0 PID: 3660 at lib/debugobjects.c:505 debug_print_object+0x16e/0x250 lib/debugobjects.c:505
Modules linked in:
CPU: 0 PID: 3660 Comm: kworker/u4:6 Not tainted 5.17.0-syzkaller-13993-g88e6c0207623 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: netns cleanup_net
RIP: 0010:debug_print_object+0x16e/0x250 lib/debugobjects.c:505
Code: ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 af 00 00 00 48 8b 14 dd 00 1c 26 8a 4c 89 ee 48 c7 c7 00 10 26 8a e8 b1 e7 28 05 <0f> 0b 83 05 15 eb c5 09 01 48 83 c4 18 5b 5d 41 5c 41 5d 41 5e c3
RSP: 0018:ffffc9000353fb00 EFLAGS: 00010082
RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000
RDX: ffff888029196140 RSI: ffffffff815efad8 RDI: fffff520006a7f52
RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff815ea4ae R11: 0000000000000000 R12: ffffffff89ce23e0
R13: ffffffff8a2614e0 R14: ffffffff816628c0 R15: dffffc0000000000
FS:  0000000000000000(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe1f2908924 CR3: 0000000043720000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 __debug_check_no_obj_freed lib/debugobjects.c:992 [inline]
 debug_check_no_obj_freed+0x301/0x420 lib/debugobjects.c:1023
 kfree+0xd6/0x310 mm/slab.c:3809
 ops_free_list.part.0+0x119/0x370 net/core/net_namespace.c:176
 ops_free_list net/core/net_namespace.c:174 [inline]
 cleanup_net+0x591/0xb00 net/core/net_namespace.c:598
 process_one_work+0x996/0x1610 kernel/workqueue.c:2289
 worker_thread+0x665/0x1080 kernel/workqueue.c:2436
 kthread+0x2e9/0x3a0 kernel/kthread.c:376
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:298
 </TASK>

Fixes: ace45bec6d77 ("rxrpc: Fix firewall route keepalive")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Marc Dionne <marc.dionne@auristor.com>
Cc: linux-afs@lists.infradead.org
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: openvswitch: fix leak of nested actions

[ Upstream commit 1f30fb9166d4f15a1aa19449b9da871fe0ed4796 ]

While parsing user-provided actions, openvswitch module may dynamically
allocate memory and store pointers in the internal copy of the actions.
So this memory has to be freed while destroying the actions.

Currently there are only two such actions: ct() and set().  However,
there are many actions that can hold nested lists of actions and
ovs_nla_free_flow_actions() just jumps over them leaking the memory.

For example, removal of the flow with the following actions will lead
to a leak of the memory allocated by nf_ct_tmpl_alloc():

  actions:clone(ct(commit),0)

Non-freed set() action may also leak the 'dst' structure for the
tunnel info including device references.

Under certain conditions with a high rate of flow rotation that may
cause significant memory leak problem (2MB per second in reporter's
case).  The problem is also hard to mitigate, because the user doesn't
have direct control over the datapath flows generated by OVS.

Fix that by iterating over all the nested actions and freeing
everything that needs to be freed recursively.

New build time assertion should protect us from this problem if new
actions will be added in the future.

Unfortunately, openvswitch module doesn't use NLA_F_NESTED, so all
attributes has to be explicitly checked.  sample() and clone() actions
are mixing extra attributes into the user-provided action list.  That
prevents some code generalization too.

Fixes: 34ae932a4036 ("openvswitch: Make tunnel set action attach a metadata dst")
Link: https://mail.openvswitch.org/pipermail/ovs-dev/2022-March/392922.html
Reported-by: Stéphane Graber <stgraber@ubuntu.com>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: mv643xx: Fix over zealous checking of_get_mac_address()

[ Upstream commit 11f8e7c122ce013fa745029fa8c94c6db69c2e54 ]

There is often not a MAC address available in an EEPROM accessible by
Linux with Marvell devices. Instead the bootload has the MAC address
and directly programs it into the hardware. So don't consider an error
from of_get_mac_address() has fatal. However, the check was added for
the case where there is a MAC address in an the EEPROM, but the EEPROM
has not probed yet, and -EPROBE_DEFER is returned. In that case the
error should be returned. So make the check specific to this error
code.

Cc: Mauri Sandberg <maukka@ext.kapsi.fi>
Reported-by: Thomas Walther <walther-it@gmx.de>
Fixes: 42404d8f1c01 ("net: mv643xx_eth: process retval from of_get_mac_address")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220405000404.3374734-1-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: openvswitch: don't send internal clone attribute to the userspace.

[ Upstream commit 3f2a3050b4a3e7f32fc0ea3c9b0183090ae00522 ]

'OVS_CLONE_ATTR_EXEC' is an internal attribute that is used for
performance optimization inside the kernel.  It's added by the kernel
while parsing user-provided actions and should not be sent during the
flow dump as it's not part of the uAPI.

The issue doesn't cause any significant problems to the ovs-vswitchd
process, because reported actions are not really used in the
application lifecycle and only supposed to be shown to a human via
ovs-dpctl flow dump.  However, the action list is still incorrect
and causes the following error if the user wants to look at the
datapath flows:

  # ovs-dpctl add-dp system@ovs-system
  # ovs-dpctl add-flow "<flow match>" "clone(ct(commit),0)"
  # ovs-dpctl dump-flows
  <flow match>, packets:0, bytes:0, used:never,
    actions:clone(bad length 4, expected -1 for: action0(01 00 00 00),
                  ct(commit),0)

With the fix:

  # ovs-dpctl dump-flows
  <flow match>, packets:0, bytes:0, used:never,
    actions:clone(ct(commit),0)

Additionally fixed an incorrect attribute name in the comment.

Fixes: b233504033db ("openvswitch: kernel datapath clone action")
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Aaron Conole <aconole@redhat.com>
Link: https://lore.kernel.org/r/20220404104150.2865736-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: xsk: fix VSI state check in ice_xsk_wakeup()

[ Upstream commit 72b915a2b444e9247c9d424a840e94263db07c27 ]

ICE_DOWN is dedicated for pf->state. Check for ICE_VSI_DOWN being set on
vsi->state in ice_xsk_wakeup().

Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Shwetha Nagaraju <shwetha.nagaraju@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: synchronize_rcu() when terminating rings

[ Upstream commit f9124c68f05ffdb87a47e3ea6d5fae9dad7cb6eb ]

Unfortunately, the ice driver doesn't respect the RCU critical section that
XSK wakeup is surrounded with. To fix this, add synchronize_rcu() calls to
paths that destroy resources that might be in use.

This was addressed in other AF_XDP ZC enabled drivers, for reference see
for example commit b3873a5be757 ("net/i40e: Fix concurrency issues
between config flow and XSK")

Fixes: efc2214b6047 ("ice: Add support for XDP")
Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Shwetha Nagaraju <shwetha.nagaraju@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipv6: Fix stats accounting in ip6_pkt_drop

[ Upstream commit 1158f79f82d437093aeed87d57df0548bdd68146 ]

VRF devices are the loopbacks for VRFs, and a loopback can not be
assigned to a VRF. Accordingly, the condition in ip6_pkt_drop should
be '||' not '&&'.

Fixes: 1d3fd8a10bed ("vrf: Use orig netdev to count Ip6InNoRoutes and a fresh route lookup when sending dest unreach")
Reported-by: Pudak, Filip <Filip.Pudak@windriver.com>
Reported-by: Xiao, Jiguang <Jiguang.Xiao@windriver.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220404150908.2937-1-dsahern@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: Do not skip not enabled queues in ice_vc_dis_qs_msg

[ Upstream commit 05ef6813b234db3196f083b91db3963f040b65bb ]

Disable check for queue being enabled in ice_vc_dis_qs_msg, because
there could be a case when queues were created, but were not enabled.
We still need to delete those queues.

Normal workflow for VF looks like:
Enable path:
VIRTCHNL_OP_ADD_ETH_ADDR (opcode 10)
VIRTCHNL_OP_CONFIG_VSI_QUEUES (opcode 6)
VIRTCHNL_OP_ENABLE_QUEUES (opcode 8)

Disable path:
VIRTCHNL_OP_DISABLE_QUEUES (opcode 9)
VIRTCHNL_OP_DEL_ETH_ADDR (opcode 11)

The issue appears only in stress conditions when VF is enabled and
disabled very fast.
Eventually there will be a case, when queues are created by
VIRTCHNL_OP_CONFIG_VSI_QUEUES, but are not enabled by
VIRTCHNL_OP_ENABLE_QUEUES.
In turn, these queues are not deleted by VIRTCHNL_OP_DISABLE_QUEUES,
because there is a check whether queues are enabled in
ice_vc_dis_qs_msg.

When we bring up the VF again, we will see the "Failed to set LAN Tx queue
context" error during VIRTCHNL_OP_CONFIG_VSI_QUEUES step. This
happens because old 16 queues were not deleted and VF requests to create
16 more, but ice_sched_get_free_qparent in ice_ena_vsi_txq would fail to
find a parent node for first newly requested queue (because all nodes
are allocated to 16 old queues).

Testing Hints:

Just enable and disable VF fast enough, so it would be disabled before
reaching VIRTCHNL_OP_ENABLE_QUEUES.

while true; do
        ip link set dev ens785f0v0 up
        sleep 0.065 # adjust delay value for you machine
        ip link set dev ens785f0v0 down
done

Fixes: 77ca27c41705 ("ice: add support for virtchnl_queue_select.[tx|rx]_queues bitmap")
Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Alice Michael <alice.michael@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: Set txq_teid to ICE_INVAL_TEID on ring creation

[ Upstream commit ccfee1822042b87e5135d33cad8ea353e64612d2 ]

When VF is freshly created, but not brought up, ring->txq_teid
value is by default set to 0.
But 0 is a valid TEID. On some platforms the Root Node of
Tx scheduler has a TEID = 0. This can cause issues as shown below.

The proper way is to set ring->txq_teid to ICE_INVAL_TEID (0xFFFFFFFF).

Testing Hints:
echo 1 > /sys/class/net/ens785f0/device/sriov_numvfs
ip link set dev ens785f0v0 up
ip link set dev ens785f0v0 down

If we have freshly created VF and quickly turn it on and off, so there
would be no time to reach VIRTCHNL_OP_CONFIG_VSI_QUEUES stage, then
VIRTCHNL_OP_DISABLE_QUEUES stage will fail with error:
[  639.531454] disable queue 89 failed 14
[  639.532233] Failed to disable LAN Tx queues, error: ICE_ERR_AQ_ERROR
[  639.533107] ice 0000:02:00.0: Failed to stop Tx ring 0 on VSI 5

The reason for the fail is that we are trying to send AQ command to
delete queue 89, which has never been created and receive an "invalid
argument" error from firmware.

As this queue has never been created, it's teid and ring->txq_teid
have default value 0.
ice_dis_vsi_txq has a check against non-existent queues:

node = ice_sched_find_node_by_teid(pi->root, q_teids[i]);
if (!node)
continue;

But on some platforms the Root Node of Tx scheduler has a teid = 0.
Hence, ice_sched_find_node_by_teid finds a node with teid = 0 (it is
pi->root), and we go further to submit an erroneous request to firmware.

Fixes: 37bb83901286 ("ice: Move common functions out of ice_main.c part 7/7")
Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Alice Michael <alice.michael@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dpaa2-ptp: Fix refcount leak in dpaa2_ptp_probe

[ Upstream commit 2b04bd4f03bba021959ca339314f6739710f0954 ]

This node pointer is returned by of_find_compatible_node() with
refcount incremented. Calling of_node_put() to aovid the refcount leak.

Fixes: d346c9e86d86 ("dpaa2-ptp: reuse ptp_qoriq driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220404125336.13427-1-linmq006@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sctp: count singleton chunks in assoc user stats

[ Upstream commit e3d37210df5c41c51147a2d5d465de1a4d77be7a ]

Singleton chunks (INIT, HEARTBEAT PMTU probes, and SHUTDOWN-
COMPLETE) are not counted in SCTP_GET_ASOC_STATS "sas_octrlchunks"
counter available to the assoc owner.

These are all control chunks so they should be counted as such.

Add counting of singleton chunks so they are properly accounted for.

Fixes: 196d67593439 ("sctp: Add support to per-association statistics via a new SCTP_GET_ASSOC_STATS call")
Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Link: https://lore.kernel.org/r/c9ba8785789880cf07923b8a5051e174442ea9ee.1649029663.git.jamie.bainbridge@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/rdmavt: add lock to call to rvt_error_qp to prevent a race condition

[ Upstream commit 4d809f69695d4e7d1378b3a072fa9aef23123018 ]

The documentation of the function rvt_error_qp says both r_lock and s_lock
need to be held when calling that function.  It also asserts using lockdep
that both of those locks are held.  However, the commit I referenced in
Fixes accidentally makes the call to rvt_error_qp in rvt_ruc_loopback no
longer covered by r_lock.  This results in the lockdep assertion failing
and also possibly in a race condition.

Fixes: d757c60eca9b ("IB/rdmavt: Fix concurrency panics in QP post_send and modify to error")
Link: https://lore.kernel.org/r/20220228165330.41546-1-dossche.niels@gmail.com
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/cm: Cancel mad on the DREQ event when the state is MRA_REP_RCVD

[ Upstream commit 107dd7beba403a363adfeb3ffe3734fe38a05cce ]

On the passive side when the disconnectReq event comes, if the current
state is MRA_REP_RCVD, it needs to cancel the MAD before entering the
DREQ_RCVD and TIMEWAIT states, otherwise the destroy_id may block until
this mad will reach timeout.

Fixes: a977049dacde ("[PATCH] IB: Add the kernel CM implementation")
Link: https://lore.kernel.org/r/75261c00c1d82128b1d981af9ff46e994186e621.1649062436.git.leonro@nvidia.com
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/mlx5: Add a missing update of cache->last_add

[ Upstream commit 1d735eeee63a0beb65180ca0224f239cc0c9f804 ]

Update cache->last_add when returning an MR to the cache so that the cache
work won't remove it.

Fixes: b9358bdbc713 ("RDMA/mlx5: Fix locking in MR cache work queue")
Link: https://lore.kernel.org/r/c99f076fce4b44829d434936bbcd3b5fc4c95020.1649062436.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/mlx5: Don't remove cache MRs when a delay is needed

[ Upstream commit 84c2362fb65d69c721fec0974556378cbb36a62b ]

Don't remove MRs from the cache if need to delay the removal.

Fixes: b9358bdbc713 ("RDMA/mlx5: Fix locking in MR cache work queue")
Link: https://lore.kernel.org/r/c3087a90ff362c8796c7eaa2715128743ce36722.1649062436.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>