review.tizen.org Git - kernel/u-boot.git/log

remove myself as phycore/litekit Maintainer

I never acked a patch that adds me as phycore i.MX31 maintainer nor was
it me who pushed the patches, so remove myself from the maintainer list
so that other people do not longer wait for my ack.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commit | commitdiff | tree

Sergey Lapin [Tue, 12 May 2009 08:25:14 +0000 (12:25 +0400)]

AFEB9260 network fix

AFEB9260 uses PA10, PA11 for ETX2 and ETX3.
Also, due to extarnal pull-up on IRQ line, Micrel PHY ID is 1 after reset sequence,
not 0.

Signed-off-by: Sergey Lapin <slapin@ossfans.org>

commit | commitdiff | tree

Graf Yang [Tue, 5 May 2009 06:26:27 +0000 (02:26 -0400)]

Blackfin: bf518f-ezbrd: reset ethernet PHY during init

We don't know what state the ethernet PHY is in when starting up, so make
sure we set it to a sane state. This fixes troubles seen when Linux boots
up, configures the PHY is a non-default state, and then the system reboots
into U-Boot which previously expected a reset state only.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit | commitdiff | tree

Mike Frysinger [Tue, 5 May 2009 05:35:41 +0000 (01:35 -0400)]

Blackfin: bf527-ezkit: fix SPI flash env params

The BF527-EZKIT settings for storing the environment in SPI flash wasn't
using the correct sector settings for the SPI flash part that is actually
on the board.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit | commitdiff | tree

Mike Frysinger [Sat, 25 Apr 2009 03:54:19 +0000 (23:54 -0400)]

Blackfin: avoid get_sclk() with early serial debug

When the clock functions were changed to use cached values (and thereby
avoiding expensive math functions), early serial debug broke because the
baud programming is called before external memory is available.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit | commitdiff | tree

Mike Frysinger [Sat, 25 Apr 2009 03:39:41 +0000 (23:39 -0400)]

Blackfin: fix booting with older bootroms (no EVT1)

When dropping jump block support, the assumption was that all bootroms
supported entry point redirection via the EVT1 register. Unfortunately,
this turned out to be incorrect for the oldest Blackfin parts (BF533-0.2
and older and BF561). No one really noticed earlier because these parts
usually are booted by bypassing the bootrom entirely, and older BF533
parts are not supported at all (too many anomalies).

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit | commitdiff | tree

Mike Frysinger [Sat, 25 Apr 2009 03:22:48 +0000 (23:22 -0400)]

Blackfin: recurse with early serial initcode

Make sure we recurse through serial_putc() rather than bang on the UART
transmit register directly to avoid hardware overflows when using \n.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

commit | commitdiff | tree

Minkyu Kang [Tue, 5 May 2009 23:39:51 +0000 (08:39 +0900)]

Merge branch 'master' of git://git.denx.de/u-boot-arm

commit | commitdiff | tree

Wolfgang Denk [Fri, 1 May 2009 19:59:12 +0000 (21:59 +0200)]

Prepare v2009.06-rc1

Update CHANGELOG.

Signed-off-by: Wolfgang Denk <wd@denx.de>

commit | commitdiff | tree

Jean-Christophe PLAGNIOL-VILLARD [Fri, 1 May 2009 13:38:06 +0000 (15:38 +0200)]

at91: remove lowlevel_init.S

lowlevel_init.S is not used any more so remove it.
As consequence, we also don't have to generate u-boot.lds
but can use a static version as before.

This also fixes the out-of-tree build problem introduced
with commit f0a2c7b4 "at91: add support for the PM9263 board"

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>

commit | commitdiff | tree

Wolfgang Denk [Thu, 30 Apr 2009 22:16:11 +0000 (00:16 +0200)]

Update CHANGELOG; minor coding style cleanup.

Signed-off-by: Wolfgang Denk <wd@denx.de>

commit | commitdiff | tree

Manikandan Pillai [Tue, 21 Apr 2009 15:29:05 +0000 (17:29 +0200)]

OMAP3: Fix timer handling to 1ms and CONFIG_SYS_HZ to 1000

Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
Signed-off-by: Manikandan Pillai <mani.pillai@ti.com>

commit | commitdiff | tree

Wolfgang Denk [Thu, 30 Apr 2009 21:54:07 +0000 (23:54 +0200)]

Merge branch 'master' of /home/wd/git/u-boot/custodians

commit | commitdiff | tree

Dirk Behme [Fri, 17 Apr 2009 12:27:56 +0000 (14:27 +0200)]

OMAP3: Beagle: Set pinmux conditionally for Rev C boards

The Beagle Rev C boards pull UART2 from an alternate set of balls.

Signed-off-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>

commit | commitdiff | tree

Ricardo Ribalda Delgado [Mon, 27 Apr 2009 16:33:33 +0000 (18:33 +0200)]

ubifs: BUG: Blocks commpressed with zlib

Blocks compressed with zlib dont have the full gzip header.

Without this patch, block compressed with zlib cannot be readed!

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>

commit | commitdiff | tree

Ricardo Ribalda Delgado [Mon, 27 Apr 2009 16:33:32 +0000 (18:33 +0200)]

lib_generic: gunzip: New function zunzip

Separate gunzip in

gunzip: Find the end of the header and call zunzip.
zunzip: Inflate gunzip block without header.

UBI fs blocks can be compresed in lzo, zlib or no-compression. The
current implementation of u-boot supported all the compressions but
there was a bug in the implementation of the zlib blocks.

UBIFS's Zlib blocks do not have header but they were compressed using
gunzip, a function used to decompress gunzip files/sectors with a
header.

This patch adds a new function zunzip that uncompress a zlib block with
no header.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>

commit | commitdiff | tree

Wolfgang Denk [Thu, 30 Apr 2009 21:01:08 +0000 (23:01 +0200)]

Merge branch 'master' of git://git.denx.de/u-boot-arm

commit | commitdiff | tree

Wolfgang Denk [Thu, 30 Apr 2009 20:59:45 +0000 (22:59 +0200)]

Merge branch 'master' of git://git.denx.de/u-boot-cfi-flash

commit | commitdiff | tree

Wolfgang Denk [Thu, 30 Apr 2009 20:58:17 +0000 (22:58 +0200)]

Merge branch 'master' of git://git.denx.de/u-boot-video

commit | commitdiff | tree

Daniel Gorsulowski [Thu, 23 Apr 2009 13:37:16 +0000 (15:37 +0200)]

at91: fixed plla calc when no USB support is active

Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

commit | commitdiff | tree

Ladislav Michl [Tue, 21 Apr 2009 23:12:04 +0000 (01:12 +0200)]

arm925t: Fix CONFIG_SYS_HZ to 1000

Let CONFIG_SYS_HZ to have value of 1000 effectively fixing all users of
get_timer.

Changes since original version:
* Set PTV=2 (divisor 8) for boards using 12MHz timer clock source to
improve timer resolution.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>

commit | commitdiff | tree

Dirk Behme [Tue, 14 Apr 2009 18:15:17 +0000 (20:15 +0200)]

OMAP3: Remove legacy NAND defines

Remove remaining legacy NAND defines for Beagle, EVM, Overo and Pandora.

Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>

commit | commitdiff | tree

Sanjeev Premi [Mon, 27 Apr 2009 15:57:54 +0000 (21:27 +0530)]

OMAP3: Print correct silicon revision

The function display_board_info() displays incorrect
silicon revision - based on the return value from
function get_cpu_rev().

This patch fixes the problem.

Signed-off-by: Sanjeev Premi <premi@ti.com>

commit | commitdiff | tree

Sanjeev Premi [Mon, 27 Apr 2009 15:57:44 +0000 (21:27 +0530)]

OMAP3: Remove unused board-types

The board-types defined in struct omap3_sysinfo seem to be
unused. The function display_board_info() is passed
board type as an argument; which is ignored.

This patch removes all uses of board-type, related definitions
and functions.

Signed-off-by: Sanjeev Premi <premi@ti.com>

commit | commitdiff | tree

Sanjeev Premi [Mon, 27 Apr 2009 15:57:27 +0000 (21:27 +0530)]

OMAP3: Use functions print_cpuinfo() and checkboard()

Use the functions print_cpuinfo() and checkboard() to
display the cpu and board specific information.

These functions reuse content from the existing function
display_board_info() - which has been removed.

Also, updated the existig OMAP3 configurations to
define:
- CONFIG_DISPLAY_CPUINFO
- CONFIG_DISPLAY_BOARDINFO

Signed-off-by: Sanjeev Premi <premi@ti.com>

commit | commitdiff | tree

Stefan Roese [Wed, 18 Mar 2009 10:17:37 +0000 (11:17 +0100)]

MTD: Change cfi-mtd to accept non-uniform sector sizes

With this patch non-uniform NOR FLASH chips (chips with multiple erase
regions) can be exported via the cfi-mtd layer and therefor used by UBI.
We select the largest sector size as erasesize. The cfi driver will make
sure that the smaller sectors are handled correctly.

Signed-off-by: Stefan Roese <sr@denx.de>

commit | commitdiff | tree

Anatolij Gustschin [Thu, 23 Apr 2009 10:35:22 +0000 (12:35 +0200)]

video: fix bug in cfb_console.c code

Fix bug in drawing long version/info strings:
U-Boot version string like
"U-Boot 2009.03-05647-g7c51e06 (Apr 23 2009 - 12:40:00) MPC83XX"
is long and doesn't wrap around correctly while drawing
beside the logo. Such long strings partially overwrite
the logo. This patch is an attempt to fix it.

Signed-off-by: Anatolij Gustschin <agust@denx.de>

commit | commitdiff | tree

Wolfgang Denk [Tue, 28 Apr 2009 06:50:31 +0000 (08:50 +0200)]

cmd_ext2.c: fix compile warnings

Get rid of these warnings:

cmd_ext2.c:247: warning: format '%ld' expects type 'long int', but argument 2 has type 'int'
cmd_ext2.c:248: warning: format '%lX' expects type 'long unsigned int', but argument 3 has type 'int'

Signed-off-by: Wolfgang Denk <wd@denx.de>

Domain: System / Kernel;

RSS Atom