drm/i915/selftests: Fixup missing MI_MEM_VIRTUAL for live_hangcheck

We always want to use a virtual address (i.e. use the GTT) for
MI_STORE_DWORD_IMM, but forgot the ever so important flag in
live_hangcheck for gen3.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706142323.25699-2-chris@chris-wilson.co.uk

drm/i915/selftests: Replace magic 1<<22 with MI_USE_GGTT/MI_MEM_VIRTUAL

Replace the magic bit with the proper symbolic name for instructing
MI_STORE_DWORD_IMM to use a virtual address (on gen3) or the global GTT
address (still virtual!) on gen4+.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706142323.25699-1-chris@chris-wilson.co.uk
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915/selftests: Limit live_gtt allocation test to fit within RAM

Limit the GTT size we try and allocate to ensure that it fits within RAM
and does not trigger the oomkiller indiscriminately.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706125338.24432-1-chris@chris-wilson.co.uk

drm/i915/gtt: Control cache domain of dma_map_page() directly

We already maually control the CPU cache for our page table directories,
so we can tell the dma mapper to skip doing it as well.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706122611.4142-2-chris@chris-wilson.co.uk

drm/i915/gtt: Suppress warnings for dma_map_page

As we propagate back the error to the caller for them to handle, we do
not need the lowest level spitting out a redundant warning upon an
allocation failure inside dma_map_page().

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706122611.4142-1-chris@chris-wilson.co.uk

drm/i915: Flush the WCB following a WC write

If we have just completed a WC write, we must ensure that the WCB (Write
Combining Buffer) is flushed out to main memory before we can expect to
see the results. This is especially important when mixing WC with GTT as
the physical paths are different and cachelines are not naturally flushed.

Testcase: igt/drv_selftests/live_coherency #gdg
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706115402.18547-1-chris@chris-wilson.co.uk

drm/i915/selftests: Skip live_execlists if the GPU is terminally wedged

If the GPU is irrecoverably wedged, we can not execute any requests
making testing execlists (request execution) pointless. Skip!

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706114510.18467-1-chris@chris-wilson.co.uk

drm/i915/selftests: Skip live context execution test without logical contexts

If the HW (or driver) doesn't support logical contexts, don't pretend we
gain anything from trying to execute GPU commands with them. At best it
reports -ENODEV, which is an unhelpful failure that we should just skip.

v2: Be more specific and check the driver/engine caps for logical (HW)
context support.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706101923.28548-1-chris@chris-wilson.co.uk

drm/i915: Record logical context support in driver caps

Avoid looking at the magical engines[RCS] to decide if the HW and driver
supports logical contexts, and instead record that knowledge during
initialisation.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706101442.21279-1-chris@chris-wilson.co.uk

drm/i915/ddi: Simplify get_encoder_power_domains()

We can simplify the encoder's get_power_domains() hook by calling it
only if the encoder is active. That way the hook can return its power
domains unconditionally without checking the active state by calling
encoder::get_hw_state(). This get_hw_state() query is in fact
redundant since it's already done by intel_modeset_readout_hw_state()
setting the encoder's crtc or leaving it NULL accordingly. Let's use
this fact to decide if the encoder is active.

While at it clarify the comment in intel_ddi_get_power_domains() about
primary vs. fake MST encoders and make sure we never do an incorrect
encoder->dig_port cast for fake MST encoders.

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705122654.17072-1-imre.deak@intel.com

drm/i915: Remove support for legacy debugfs crc interface

This interface is deprecated, and has been replaced by the upstream
drm crc interface.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tomi Sarvela <tomi.p.sarvela@intel.com>
Cc: Petri Latvala <petri.latvala@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180628072303.14175-1-maarten.lankhorst@linux.intel.com

drm/i915/selftests: Skip over live context testing when wedged

If the GPU is terminally wedged we cannot submit any requests into a
context, completely unfulfilling our purpose of doing so. As this
expectedly fails, skip over the test.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706065332.15214-9-chris@chris-wilson.co.uk

drm/i915/selftests: Skip huge pages live tests if wedged

We test the GPU handling of huge pages by submitting requests that write
into a huge page, but if the GPU is irrecoverably wedged we cannot
submit any requests. As the test expectedly fails, skip over it.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706065332.15214-8-chris@chris-wilson.co.uk

drm/i915/selftests: Skip live eviction tests when wedged

If the GPU is irrecoverably wedged, we cannot submit any requests and so
cannot make the GTT busy in order to test evicting active objects. As
this expectedly fails, skip over the test.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706065332.15214-7-chris@chris-wilson.co.uk

drm/i915/selftests: Skip workaround tests when wedged

If the GPU is irrecoverably wedged, we cannot submit any request and
therefore cannot query the register state of the context (which is done
using the GPU command stream). So skip over the test as it expectedly
fails.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706065332.15214-6-chris@chris-wilson.co.uk

drm/i915/selftests: Skip all request selftests when wedged

If the GPU is irrecoverably wedge, we cannot submit any request and so
all of the request selftests will expectedly fail. Skip over them.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706065332.15214-5-chris@chris-wilson.co.uk

drm/i915/selftests: Skip making an object busy if the GPU is wedged

If the GPU is wedged, we cannot make the object busy as trying to
submit a request will generate -EIO. Skip to the end of the test.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706065332.15214-4-chris@chris-wilson.co.uk

drm/i915/selftests: Skip using the GPU if wedged

If the GPU is irrecoverably broken, we can not use it to dirty memory
and check for cache coherency with the CPU. All we can do is simply skip
over the GPU subtests and focus on the CPU domains (WC, WB) cache
management.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107127
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706065332.15214-3-chris@chris-wilson.co.uk

drm/i915/selftests: Destroy partial tiling vma after use

As we keep VMA around until the object is destroyed, when testing
partial tiling we instantiate many, many VMA (as the object is huge
allowing for many different partial regions). We test elsewhere our
handling of populating large objects with a full set of VMA and checking
we can retrieve them afterwards, but in this test we incur the cost of
flushing all VMA after every GTT write, dramatically slowing down the
test.

References: https://bugs.freedesktop.org/show_bug.cgi?id=107130
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706065332.15214-2-chris@chris-wilson.co.uk

drm/i915: Squelch very verbose error logging

Having found the error causing the IGT test to fail, downgrade the
verbose logging so that we stop flooding the syslogs as we deliberately
provoke it many thousands of time during selftests.

References: 10195b1e4411 ("drm/i915: Show vma allocator stack when in doubt")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706065332.15214-1-chris@chris-wilson.co.uk

drm/i915/icl: Define AUX lane registers for Port A/B

This patch defines AUX lane registers for PORT_PCS_DW1,
PORT_TX_DW2, PORT_TX_DW4, PORT_TX_DW5 used during
dsi enabling.

v2: Review comments from Jani N:
    - Define _ICL_PORT_PCS_DW1_AUX_A for consistency
    - Three spaces for bitfield definition.

Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1530798591-2077-8-git-send-email-madhav.chauhan@intel.com

drm/i915/icl: Power down unused DSI lanes

To save power, unused lanes should be powered
down using the bitfield of PORT_CL_DW10.

v2: Review comments from Jani N
    - Put default label next to case 4
    - Include the shifts in the macros

Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1530798591-2077-7-git-send-email-madhav.chauhan@intel.com

drm/i915/icl: Define PORT_CL_DW_10 register

This register used to power down individual lanes for
DDI/DSI ports. Bitfields to power up/down various
combinations of lanes are also added in this patch.

v2: Review comments from Jani N
    - Use override instead of "override" for bitfields
    - Define mask for override bitfield
    - Define PWR_DOWN_LN* macros shifted in place
v3: Correct PWR_DOWN_LN_MASK value (Jani N)

Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1530798591-2077-6-git-send-email-madhav.chauhan@intel.com

drm/i915/icl: Enable DSI IO power

This patch configures mode of operation for DSI
and enable DDI IO power by configuring power well.

v2: Use for_each_dsi_port() for power get (Jani N)

Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1530798591-2077-5-git-send-email-madhav.chauhan@intel.com

drm/i915/icl: Define DSI mode ctl register

This patch defines DSI IO mode control register and it's bits
used while enabling IO power for DSI.

Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1530798591-2077-4-git-send-email-madhav.chauhan@intel.com

drm/i915/icl: Program DSI Escape clock Divider

Escape Clock is used for LP communication across the DSI
Link. To achieve the constant frequency of the escape clock
from the variable DPLL frequency output, a variable divider(M)
is needed. This patch programs the same.

v2: (Jani N) Don't end line with "(".

Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1530798591-2077-3-git-send-email-madhav.chauhan@intel.com

drm/i915/dsi: update some of the platform based checks

Use the more customary order of latest platform first, and don't bother
with an if in the last branch.

Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705132509.12881-3-jani.nikula@intel.com

drm/i915/dsi: use vlv and bxt prefixes for the global DSI functions

Avoid confusion with the functions to be added for the new ICL or gen 11
DSI implementation by renaming the current DSI functions. While at it,
permutate the words in the function names to make them all start with
"vlv_dsi" or "vlv_dsi_pll" etc.

Reduce the platform abstractions in the PLL file while at it, moving the
checks to vlv_dsi.c instead, where we typically already have the
necessary if ladders.

Leave the static functions as-is for now; they could be renamed later if
needed.

No functional changes.

v2: use "gen7" prefix.

v3: use "vlv" and "bxt" prefixes, reduce the abstractions.

References: https://patchwork.freedesktop.org/series/44823/
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705132509.12881-2-jani.nikula@intel.com

drm/i915/dsi: rename the current DSI files based on first platform

Starting from ICL or gen 11 we have a new DSI block which requires
completely different programming from the current implementation. Having
them in the same file would be confusing. Rename the current DSI and DSI
PLL implementation files as vlv_dsi.c and vlv_dsi_pll.c.

No functional changes.

v2: use "gen7" prefix.

v3: use "vlv" prefix.

References: https://patchwork.freedesktop.org/series/44823/
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705132509.12881-1-jani.nikula@intel.com

drm/i915/selftests: Fail hangcheck testing if the GPU is wedged

If the GPU is irrecoverably wedged on startup, it means that it failed
on initialisation and we have already tried to reset it but failed. We
can ignore all further testing, as it is already dead. Failing early,
prevents us from slowly failing in our endeavours later and timing out.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705150214.28316-1-chris@chris-wilson.co.uk

drm/i915/selftests: Detect unknown swizzling correctly

i915_gem_detect_bit_6_swizzle() tries to hide unknown swizzling from
userspace (and ourselves) leaving us with the only clue inside
i915->quirks & QUIRK_PIN_SWIZZLED_PAGES. If we see this bit set, it
means that we really have no clue as to what the swizzle pattern is
being used in any one page and so cannot compute what the reference
value should be in our tiling selftests. We have to skip the test.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107133
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705171523.18462-1-chris@chris-wilson.co.uk

drm/i915: Remove pointless if-else from sdvo code

The return value is a bool so we can just return the result of
the biwise AND. The compiler will take care of the rest.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180621174658.18823-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/selftests: Fixup recursive MI_BB_START for gen3

There's no magic bit0 in MI_BB_START for gen3, it's the same dword length
parameter as elsewhere and needs to be zero.

v2: Same bug in both live_requests and live_hanghcheck.

References: https://bugs.freedesktop.org/show_bug.cgi?id=107132
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705154756.5533-1-chris@chris-wilson.co.uk
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Mark expected switch fall-throughs

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Addresses-Coverity-ID: 141432
Addresses-Coverity-ID: 141433
Addresses-Coverity-ID: 141434
Addresses-Coverity-ID: 141435
Addresses-Coverity-ID: 141436
Addresses-Coverity-ID: 1357360
Addresses-Coverity-ID: 1357403
Addresses-Coverity-ID: 1357433
Addresses-Coverity-ID: 1392622
Addresses-Coverity-ID: 1415273
Addresses-Coverity-ID: 1435752
Addresses-Coverity-ID: 1441500
Addresses-Coverity-ID: 1454596
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180628223541.GA17665@embeddedor.com

drm/i915/icl: Define register for DSI PLL

This patch adds the new registers and corresponding bit definitions
which will be used for programming/enable DSI PLL.

v2: Review comments from Jani N
    - Fix spaces while defining ICL_ESC_CLK_DIV_MASK
    - Define shift and mask for bitfields.

Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1530795727-28644-2-git-send-email-madhav.chauhan@intel.com

drm/i915/selftests: Replace open-coded i915_address_space_init()

Use i915_address_space_init() rather than open-code it inside
mock_ppgtt() as we will forget to keep it in sync.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705065653.20449-3-chris@chris-wilson.co.uk

drm/i915/selftests: Use full release for local ppgtt allocation

We can now use the full release mechanism (i915_ppgtt_put) for our local
ppgtt allocation in igt_ppgtt_alloc.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705065653.20449-2-chris@chris-wilson.co.uk

drm/i915: Remove defunct i915->vm_list

No longer used and can be removed. One less global that currently
demands struct_mutex protection.

References: e9e7dc4144cd ("drm/i915/gtt: Make gen6 page directories evictable")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705065653.20449-1-chris@chris-wilson.co.uk

drm/i915/gtt: Pull global wc page stash under its own locking

Currently, the wc-stash used for providing flushed WC pages ready for
constructing the page directories is assumed to be protected by the
struct_mutex. However, we want to remove this global lock and so must
install a replacement global lock for accessing the global wc-stash (the
per-vm stash continues to be guarded by the vm).

We need to push ahead on this patch due to an oversight in hastily
removing the struct_mutex guard around the igt_ppgtt_alloc selftest. No
matter, it will prove very useful (i.e. will be required) in the near
future.

v2: Restore the onstack stash so that we can drop the vm->mutex in
future across the allocation.
v3: Restore the lost pagevec_init of the onstack allocation, and repaint
function names.
v4: Reorder init so that we don't try and use i915_address_space before
it is ininitialised.

Fixes: 1f6f00238abf ("drm/i915/selftests: Drop struct_mutex around lowlevel pggtt allocation")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180704185518.4193-1-chris@chris-wilson.co.uk

drm/i915: Unmask and enable master error interrupt on gen2/3

For whatever reason we only unmask and enable the master error
interrut on gen4. With the EIR handling fixed let's do that
on gen2/3 as well.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180611200258.27121-4-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>

drm/i915: Fix pre-ILK error interrupt ack

Adjust the EIR clearing to cope with the edge triggered IIR
on i965/g4x. To guarantee an edge in the ISR master error bit
we temporarily mask everything in EMR. As some of the EIR bits
can't even be directly cleared we also borrow a trick from
i915_clear_error_registers() and permanently mask any bit that
remains high. No real thought given to how we might unmask them
again once the cause for the error has been clered. I suppose
on pre-g4x GPU reset will reinitialize EMR from scratch.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180611200258.27121-3-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>

drm/i915: Fix hotplug irq ack on i965/g4x

Just like with PIPESTAT, the edge triggered IIR on i965/g4x
also causes problems for hotplug interrupts. To make sure
we don't get the IIR port interrupt bit stuck low with the
ISR bit high we must force an edge in ISR. Unfortunately
we can't borrow the PIPESTAT trick and toggle the enable
bits in PORT_HOTPLUG_EN as that act itself generates hotplug
interrupts. Instead we just have to loop until we've cleared
PORT_HOTPLUG_STAT, or we just give up and WARN.

v2: Don't frob with PORT_HOTPLUG_EN

Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180614175625.1615-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>

drm/i915/selftests: Drop struct_mutex around lowlevel pggtt allocation

For a ppgtt that we are constructing, there is no struct_mutex
dependence so skip it. In the process, also ping the scheduler
frequently to try and avoid the NMI watchdog.

v2: gen6 requires struct_mutex to clean up (currently)

Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=107094
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180703135331.12265-1-chris@chris-wilson.co.uk

drm/i915/selftests: Release the struct_mutex to free the objects

live_gtt is a very slow test to run, simply because it tries to allocate
and use as much as the 48b address space as possibly can and in the
process will try to own all of the system memory. This leads to resource
exhaustion and CPU starvation; the latter impacts us when the NMI
watchdog declares a task hung due to a mutex contention with ourselves.
This we can prevent by releasing the struct_mutex and forcing our
i915/rcu workers to run, and in particular flushing the freed object
worker that is the cause for concern.

References: https://bugs.freedesktop.org/show_bug.cgi?id=107094
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180703101829.7360-1-chris@chris-wilson.co.uk

drm/i915: Wait for PSR exit before checking for vblank evasion

The PIPEDSL freezes on PSR entry and if PSR hasn't fully exited, then
the pipe_update_start call schedules itself out to check back later.

On ChromeOS-4.4 kernel, which is fairly up-to-date w.r.t drm/i915 but
lags w.r.t core kernel code, hot plugging an external display triggers
tons of "potential atomic update errors" in the dmesg, on *pipe A*. A
closer analysis reveals that we try to read the scanline 3 times and
eventually timeout, b/c PSR hasn't exited fully leading to a PIPEDSL
stuck @ 1599. This issue is not seen on upstream kernels, b/c for *some*
reason we loop inside intel_pipe_update start for ~2+ msec which in this
case is more than enough to exit PSR fully, hence an *unstuck* PIPEDSL
counter, hence no error. On the other hand, the ChromeOS kernel spends
~1.1 msec looping inside intel_pipe_update_start and hence errors out
b/c the source is still in PSR.

Regardless, we should wait for PSR exit (if PSR is disabled, we incur
a ~1-2 usec penalty) before reading the PIPEDSL, b/c if we haven't
fully exited PSR, then checking for vblank evasion isn't actually
applicable.

v4: Comment explaining psr_wait after enabling VBL interrupts (DK)

v5: CAN_PSR() to handle platforms that don't support PSR.

v6: Handle local_irq_disable on early return (Chris)

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Tarun Vyas <tarun.vyas@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180627200250.1515-2-tarun.vyas@intel.com

drm/i915/psr: Lockless version of psr_wait_for_idle

This is a lockless version of the exisiting psr_wait_for_idle().
We want to wait for PSR to idle out inside intel_pipe_update_start.
At the time of a pipe update, we should never race with any psr
enable or disable code, which is a part of crtc enable/disable.
The follow up patch will use this lockless wait inside pipe_update_
start to wait for PSR to idle out before checking for vblank evasion.
We need to keep the wait in pipe_update_start to as less as it can be.
So,we can live and flourish w/o taking any psr locks at all.

Even if psr is never enabled, psr2_enabled will be false and this
function will wait for PSR1 to idle out, which should just return
immediately, so a very short (~1-2 usec) wait for cases where PSR
is disabled.

v2: Add comment to explain the 25msec timeout (DK)

v3: Rename psr_wait_for_idle to __psr_wait_for_idle_locked to avoid
    naming conflicts and propagate err (if any) to the caller (Chris)

v5: Form a series with the next patch

v7: Better explain the need for lockless wait and increase the max
    timeout to handle refresh rates < 60 Hz (Daniel Vetter)

v8: Rebase

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Tarun Vyas <tarun.vyas@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180627200250.1515-1-tarun.vyas@intel.com

drm/i915: Remove unnecessary check for unsupported modifiers for NV12

There is already a check to allow only RGB8888 formats with CCS
modifiers.

Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180628061854.6430-1-dhinakaran.pandiyan@intel.com

drm/i915/psr: Add psr1 live status

Prints live state of psr1.Extending the existing
PSR2 live state function to cover psr1.

Tested on KBL with psr2 and psr1 panel.

v2: rebase
v3: DK
    Rename psr2_live_status to psr_source_status.
v4: DK
    Move EDP_PSR_STATUS_STATE_SHIFT below EDP_PSR_STATUS_STATE_MASK.
    Pass seq to psr_source_status, handle source status prints in
    psr_source_status.
v5: Fixed CI warning messages
v6:
    Remove extra space in the title before the colon.(DK)
    Rebase. (Jani)
v7: Use tabs for indenting the values.(Jani)
v8: Addressed dk's review comments.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1530086910-15914-1-git-send-email-vathsala.nagaraju@intel.com

drm/i915: Try GGTT mmapping whole object as partial

If the whole object is already pinned by HW for use as scanout, we will
fail to move it to the mappable region and so must resort to using a
partial VMA covering the whole object.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104513
Fixes: aa136d9d72c2 ("drm/i915: Convert partial ggtt vma to full ggtt if it spans the entire object")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180630090509.469-1-chris@chris-wilson.co.uk

drm/i915: abstract and document register picking macros

Try to describe what the pick variants do, and which to prefer. No
functional changes.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180629102039.2435-1-jani.nikula@intel.com

drm/i915/guc: Print CTL params passed to Guc

While debugging we may want to examine params passed to GuC.

v2: drop #ifdef DEBUG_GUC - Michal

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com> #1
Cc: Michal Winiarski <michal.winiarski@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180618111821.47088-1-michal.wajdeczko@intel.com

drm/i915/selftests: Attach the fence to the object when making busy

make_obj_busy() makes a dummy busy object, but didn't attach the fence
to the reservation object, so it would not have registered as busy. For
completeness, attach the dummy request as the exclusive fence and mark
the object as written (in i915_vma_move_to_active)

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180629133717.11761-2-chris@chris-wilson.co.uk

drm/i915/selftests: Mark up write into scratch vma

We correctly attach the exclusive fetch for the scratch object when
emitting a request that writes into it, but for completeness we should
also declared the write to i915_vma_move_to_active()

Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180629133717.11761-1-chris@chris-wilson.co.uk

drm/i915: Remove delayed FBC activation.

The only time we should start FBC is when we have waited a vblank
after the atomic update. We've already forced a vblank wait by doing
wait_for_flip_done before intel_post_plane_update(), so we don't need
to wait a second time before enabling.

Removing the worker simplifies the code and removes possible race
conditions, like happening in 103167.

Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103167
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625163758.10871-2-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Block enabling FBC until flips have been completed

There is a small race window in which FBC can be enabled after
pre_plane_update is called, but before the page flip has been
queued or completed.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103167
Link: https://patchwork.freedesktop.org/patch/msgid/20180625163758.10871-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915/execlists: Direct submission of new requests (avoid tasklet/ksoftirqd)

Back in commit 27af5eea54d1 ("drm/i915: Move execlists irq handler to a
bottom half"), we came to the conclusion that running our CSB processing
and ELSP submission from inside the irq handler was a bad idea. A really
bad idea as we could impose nearly 1s latency on other users of the
system, on average! Deferring our work to a tasklet allowed us to do the
processing with irqs enabled, reducing the impact to an average of about
50us.

We have since eradicated the use of forcewaked mmio from inside the CSB
processing and ELSP submission, bringing the impact down to around 5us
(on Kabylake); an order of magnitude better than our measurements 2
years ago on Broadwell and only about 2x worse on average than the
gem_syslatency on an unladen system.

In this iteration of the tasklet-vs-direct submission debate, we seek a
compromise where by we submit new requests immediately to the HW but
defer processing the CS interrupt onto a tasklet. We gain the advantage
of low-latency and ksoftirqd avoidance when waking up the HW, while
avoiding the system-wide starvation of our CS irq-storms.

Comparing the impact on the maximum latency observed (that is the time
stolen from an RT process) over a 120s interval, repeated several times
(using gem_syslatency, similar to RT's cyclictest) while the system is
fully laden with i915 nops, we see that direct submission an actually
improve the worse case.

Maximum latency in microseconds of a third party RT thread
(gem_syslatency -t 120 -f 2)
  x Always using tasklets (a couple of >1000us outliers removed)
  + Only using tasklets from CS irq, direct submission of requests
+------------------------------------------------------------------------+
|          +                                                             |
|          +                                                             |
|          +                                                             |
|          +       +                                                     |
|          + +     +                                                     |
|       +  + +     +  x     x     x                                      |
|      +++ + +     +  x  x  x  x  x  x                                   |
|      +++ + ++  + +  *x x  x  x  x  x                                   |
|      +++ + ++  + *  *x x  *  x  x  x                                   |
|    + +++ + ++  * * +*xxx  *  x  x  xx                                  |
|    * +++ + ++++* *x+**xx+ *  x  x xxxx x                               |
|   **x++++*++**+*x*x****x+ * +x xx xxxx x          x                    |
|x* ******+***************++*+***xxxxxx* xx*x     xxx +                x+|
|             |__________MA___________|                                  |
|      |______M__A________|                                              |
+------------------------------------------------------------------------+
    N           Min           Max        Median           Avg        Stddev
x 118            91           186           124     125.28814     16.279137
+ 120            92           187           109     112.00833     13.458617
Difference at 95.0% confidence
-13.2798 +/- 3.79219
-10.5994% +/- 3.02677%
(Student's t, pooled s = 14.9237)

However the mean latency is adversely affected:

Mean latency in microseconds of a third party RT thread
(gem_syslatency -t 120 -f 1)
  x Always using tasklets
  + Only using tasklets from CS irq, direct submission of requests
+------------------------------------------------------------------------+
|           xxxxxx                                        +   ++         |
|           xxxxxx                                        +   ++         |
|           xxxxxx                                      + +++ ++         |
|           xxxxxxx                                     +++++ ++         |
|           xxxxxxx                                     +++++ ++         |
|           xxxxxxx                                     +++++ +++        |
|           xxxxxxx                                   + ++++++++++       |
|           xxxxxxxx                                 ++ ++++++++++       |
|           xxxxxxxx                                 ++ ++++++++++       |
|          xxxxxxxxxx                                +++++++++++++++     |
|         xxxxxxxxxxx    x                           +++++++++++++++     |
|x       xxxxxxxxxxxxx   x           +            + ++++++++++++++++++  +|
|           |__A__|                                                      |
|                                                      |____A___|        |
+------------------------------------------------------------------------+
    N           Min           Max        Median           Avg        Stddev
x 120         3.506         3.727         3.631     3.6321417    0.02773109
+ 120         3.834         4.149         4.039     4.0375167   0.041221676
Difference at 95.0% confidence
0.405375 +/- 0.00888913
11.1608% +/- 0.244735%
(Student's t, pooled s = 0.03513)

However, since the mean latency corresponds to the amount of irqsoff
processing we have to do for a CS interrupt, we only need to speed that
up to benefit not just system latency but our own throughput.

v2: Remember to defer submissions when under reset.
v4: Only use direct submission for new requests
v5: Be aware that with mixing direct tasklet evaluation and deferred
tasklets, we may end up idling before running the deferred tasklet.
v6: Remove the redudant likely() from tasklet_is_enabled(), restrict the
annotation to reset_in_progress().
v7: Take the full timeline.lock when enabling perf_pmu stats as the
tasklet is no longer a valid guard. A consequence is that the stats are
now only valid for engines also using the timeline.lock to process
state.

Testcase: igt/gem_exec_latency/*rthog*
References: 27af5eea54d1 ("drm/i915: Move execlists irq handler to a bottom half")
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180628201211.13837-9-chris@chris-wilson.co.uk

drm/i915/execlists: Trust the CSB

Now that we use the CSB stored in the CPU friendly HWSP, we do not need
to track interrupts for when the mmio CSB registers are valid and can
just check where we read up to last from the cached HWSP. This means we
can forgo the atomic bit tracking from interrupt, and in the next patch
it means we can check the CSB at any time.

v2: Change the splitting inside reset_prepare, we only want to lose
testing the interrupt in this patch, the next patch requires the change
in locking

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180628201211.13837-8-chris@chris-wilson.co.uk

drm/i915/execlists: Stop storing the CSB read pointer in the mmio register

As we now never read back our current head position from the CSB
pointers register, and the HW itself doesn't use it to prevent
overwriting unread CSB entries, we do not need to keep updating the
register. As it turns out this register is not listed as being shadowed,
and so requires forcewake -- but we haven't been taking forcewake around
it so the writes has probably been regularly dropped. Fortuitously, we
only read the value after a reset where it did not matter, and zero was
the right answer (well, close enough).

Mika pointed out that this was how we used to do it (accidentally!)
before he fixed it in commit cc53699b25b5 ("drm/i915: Use masked write
for Context Status Buffer Pointer").

References: cc53699b25b5 ("drm/i915: Use masked write for Context Status Buffer Pointer")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180628201211.13837-7-chris@chris-wilson.co.uk

drm/i915/execlists: Reset CSB write pointer after reset

On HW reset, the HW clears the write pointer (to 0). But since it also
writes its first CSB entry to slot 0, we need to reset the write pointer
back to the element before (so the first entry we read is 0).

This is required for the next patch, where we trust the CSB completely!

v2: Use _MASKED_FIELD
v3: Store the reset value, so that we differentiate between mmio/hwsp
transparently and without pretense.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180628201211.13837-6-chris@chris-wilson.co.uk

drm/i915/execlists: Unify CSB access pointers

Following the removal of the last workarounds, the only CSB mmio access
is for the old vGPU interface. The mmio registers presented by vGPU do
not require forcewake and can be treated as ordinary volatile memory,
i.e. they behave just like the HWSP access just at a different location.
We can reduce the CSB access to a set of read/write/buffer pointers and
treat the various paths identically and not worry about forcewake.
(Forcewake is nightmare for worstcase latency, and we want to process
this all with irqsoff -- no latency allowed!)

v2: Comments, comments, comments. Well, 2 bonus comments.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180628201211.13837-5-chris@chris-wilson.co.uk

drm/i915/execlists: Process one CSB update at a time

In the next patch, we will process the CSB events directly from the
submission path, rather than only after a CS interrupt. Hence, we will
no longer have the need for a loop until the has-interrupt bit is clear,
and in the meantime can remove that small optimisation.

v2: Tvrtko pointed out it was safer to unconditionally kick the tasklet
after each irq, when assuming that the tasklet is called for each irq.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180628201211.13837-4-chris@chris-wilson.co.uk

drm/i915/execlists: Pull CSB reset under the timeline.lock

In the following patch, we will process the CSB events under the
timeline.lock and not serialised by the tasklet. This also means that we
will need to protect access to common variables such as
execlists->csb_head with the timeline.lock during reset.

v2: Move sync_irq to avoid deadlocks between taking timeline.lock from
our interrupt handler.
v3: Kill off the synchronize_hardirq as it raises more questions than
answered; now we use the timeline.lock entirely for CSB serialisation
between the irq and elsewhere, we don't need to be so heavy handed with
flushing
v4: Treat request cancellation (wedging after failed reset) similarly

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180628201211.13837-3-chris@chris-wilson.co.uk

drm/i915/execlists: Pull submit after dequeue under timeline lock

In the next patch, we will begin processing the CSB from inside the
submission path (underneath an irqsoff section, and even from inside
interrupt handlers). This means that updating the execlists->port[] will
no longer be serialised by the tasklet but needs to be locked by the
engine->timeline.lock instead. Pull dequeue and submit under the same
lock for protection. (An alternate future plan is to keep the in/out
arrays separate for concurrent processing and reduced lock coverage.)

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180628201211.13837-2-chris@chris-wilson.co.uk

drm/i915: Drop posting reads to flush master interrupts

We do not need to do a posting read of our uncached mmio write to
re-enable the master interrupt lines after handling an interrupt, so
don't. This saves us a slow UC read before we can process the interrupt,
most noticeable in execlists where any stalls imposes extra latency on
GPU command execution.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180628201211.13837-1-chris@chris-wilson.co.uk

drm/i915/uc: Fetch GuC/HuC firmwares from guc/huc specific init

We're fetching GuC/HuC firmwares directly from uc level during
init_early stage but this breaks guc/huc struct isolation and
also strict SW-only initialization rule for init_early. Move fw
fetching to init phase and do it separately per guc/huc struct.

v2: don't forget to move wopcm_init - Michele
v3: fetch in init_misc phase - Michal

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com> #2
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180628141522.62788-2-michal.wajdeczko@intel.com

drm/i915/guc: Use intel_guc_init_misc to hide GuC internals

We will add more init steps to misc phase and there is no need
to expose them separately for use in uc_init_misc function.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180628141522.62788-1-michal.wajdeczko@intel.com

drm/i915: Only signal from interrupt when requested

Avoid calling dma_fence_signal() from inside the interrupt if we haven't
enabled signaling on the request.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180627201304.15817-4-chris@chris-wilson.co.uk

drm/i915: Move the irq_counter inside the spinlock

Rather than have multiple locked instructions inside the notify_ring()
irq handler, move them inside the spinlock and reduce their intrinsic
locking.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180627201304.15817-3-chris@chris-wilson.co.uk

drm/i915: Only trigger missed-seqno checking next to boundary

If we have more interrupts pending (because we know there are more
breadcrumb signals before the completion), then we do not need to
trigger an irq_seqno_barrier or even wakeup the task on this interrupt
as there will be another. To allow some margin of error (we are trying
to work around incoherent seqno after all), we wakeup the breadcrumb
before the target as well as on the target.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180627201304.15817-2-chris@chris-wilson.co.uk

drm/i915: Reduce spinlock hold time during notify_ring() interrupt

By taking advantage of the RCU protection of the task struct, we can find
the appropriate signaler under the spinlock and then release the spinlock
before waking the task and signaling the fence.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180627201304.15817-1-chris@chris-wilson.co.uk

drm/i915: Show vma allocator stack when in doubt

At the moment, gem_exec_gttfill fails with a sporadic EBUSY due to us
wanting to unbind a pinned batch. Let's dump who first bound that vma to
see if that helps us identify who still unexpectedly has it pinned.

v2: We cannot allocate inside the printer (as it may be on an fs-reclaim
path), so hope for the best and build the string on the stack
v3: stack depth of 16 routinely overflows a 512 character string, limit
it to 12 to avoid unsightly truncation.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180628132206.8329-1-chris@chris-wilson.co.uk

drm/i915: Replace drm_dev_unref with drm_dev_put

This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.

Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180618110154.30462-6-tdz@users.sourceforge.net

drm/i915: Replace drm_gem_object_unreference_unlocked with put function

This patch unifies the naming of DRM functions for reference counting
of struct drm_gem_object. The resulting code is more aligned with the
rest of the Linux kernel interfaces.

Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180618110154.30462-5-tdz@users.sourceforge.net

drm/i915: Replace __drm_gem_object_unreference with __drm_gem_object_put

This patch unifies the naming of DRM functions for reference counting
of struct drm_gem_object. The resulting code is more aligned with the
rest of the Linux kernel interfaces.

Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180618110154.30462-4-tdz@users.sourceforge.net

drm/i915: Replace drm_gem_object_{un/reference} with {put,get} functions

This patch unifies the naming of DRM functions for reference counting
of struct drm_gem_object. The resulting code is more aligned with the
rest of the Linux kernel interfaces.

Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180618110154.30462-3-tdz@users.sourceforge.net

drm/i915: Replace drm_connector_{un/reference} with put,get functions

This patch unifies the naming of DRM functions for reference counting
of struct drm_connector. The resulting code is more aligned with the
rest of the Linux kernel interfaces.

Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180618110154.30462-2-tdz@users.sourceforge.net

drm/i915/icp: Add Interrupt Support

This patch addresses Interrupts from south display engine (SDE).

ICP has two registers - SHOTPLUG_CTL_DDI and SHOTPLUG_CTL_TC.
Introduce these registers and their intended values.

Introduce icp_irq_handler().

The icp_irq_postinstall() takes care of
enabling all PCH interrupt sources, to unmask
them as needed with SDEIMR, as is done
done by ibx_irq_pre_postinstall() for earlier platforms.
We do not need to explicitly call the ibx_irq_pre_postinstall().

Also, while changing these,
s/CPT/PPT/CPT-CNP comment.

v2:
- remove redundant register defines.(Lucas)
- Change register names to be more consistent with
previous platforms (Lucas)

v3:
-Reorder bit defines to a more appropriate location.
 Change the comments. Confirm in the commit message that
 icp_irq_postinstall() need not go to
 ibx_irq_pre_postinstall() and ibx_irq_postinstall()
 as in earlier platforms. (Paulo)

Cc: Lucas De Marchi <lucas.de.marchi@gmail.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
[Paulo: coding style bikesheds and rebases].
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1530046343-30649-1-git-send-email-anusha.srivatsa@intel.com

drm/i915: Wait for engines to idle before retiring

In the next^W forthcoming patch, we will start to defer retiring the
request from the engine list if it is still active on the submission
backend. To preserve the semantics that after wait-for-idle completes
the system is idle and fully retired, we need to therefore wait for the
backends to idle before calling i915_retire_requests().

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180627115334.16282-1-chris@chris-wilson.co.uk

drm/i915/icl: Add power well support

Add the definition for ICL power wells and their mapping to power
domains. On ICL there are 3 power well control registers, we'll select
the correct one based on higher bits of the power well ID. The offset
for the control and status flags within this register is based on the
lower bits of the ID as on older platforms.

As the DC state programming is also the same as on old platforms we can
reuse the corresponding helpers. For this we mark here the DC-off power
well as shared among multiple platforms.

Other than the above the delta between old platforms and ICL:
- Pipe C has its own power well, so we can save some additional power in the
  pipe A+B and (non-eDP) pipe A configurations.
- Power wells for port E/F DDI/AUX IO and Thunderbolt 1-4 AUX IO

v2:
- Rebase on drm-tip after prep patch for this was merged there as
  requested by Paulo.
- Actually add the new AUX and DDI power well control regs (Rakshmi)

v3:
- Fix power well register names in code comments
- Add TBT AUX->power well 3 dependency

v4:
- Rebase

v5:
- Detach AUX power wells from the INIT power domain. These power wells
  can only be enabled in a TC/TBT connected state and otherwise not
  needed during driver initialization.

v6:
- Use _MMIO_PORT(...) instead _MMIO(_PICK(...)) (Paulo)
  Fix checkpatch warnings.

Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Rakshmi Bhatia <rakshmi.bhatia@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com> (v1)
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180626142232.22361-1-imre.deak@intel.com

drm/i915/psr: Enable CRC check in the static frame on the sink side

Sink can be configured to calculate the CRC over the static frame and
compare with the CRC calculated and transmited in the VSC SDP by
source, if there is a mismatch sink will do a short pulse in HPD
and set DP_PSR_LINK_CRC_ERROR in DP_PSR_ERROR_STATUS.

Spec: 7723

v6:
andling DP_PSR_LINK_CRC_ERROR here and remove "bdw+" from commit
message

v4:
patch moved to after 'drm/i915/psr: Avoid PSR exit max time timeout'
to avoid touch in 2 patches EDP_PSR_DEBUG.

v3:
disabling PSR instead of exiting on error

Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180626201644.21932-5-jose.souza@intel.com

drm/i915/psr: Avoid PSR exit max time timeout

Specification requires that max time should be masked from bdw and
forward but it can be also safely enabled to hsw.
This will make PSR exits more deterministic and only when really
needed. If this was used to fix a issue in some panel than can
only self-refresh for a few seconds, that panel will interrupt
and assert one of the PSR errors handled in:
'drm/i915/psr: Handle PSR RFB storage error' and
'drm/i915/psr: Begin to handle PSR/PSR2 errors set by sink'

Spec: 21664

v4:
patch moved to before 'drm/i915/psr/bdw+: Enable CRC check in the
static frame on the sink side' to avoid touch in 2 patches
EDP_PSR_DEBUG.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180626201644.21932-4-jose.souza@intel.com

drm/i915/psr: Handle PSR errors

Sink will interrupt source when it have any PSR error.
DP_PSR_VSC_SDP_UNCORRECTABLE_ERROR is a PSR2 but already
handling it here.
The only missing error to be handled is DP_PSR_LINK_CRC_ERROR that
will be taken in care in a futher patch.

v6:
not handling DP_PSR_LINK_CRC_ERROR here

v5:
handling all PSR errors here, so the commit message and
comment have changed

v3:
disabling PSR instead of exiting on error

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180626201644.21932-3-jose.souza@intel.com

drm/i915/psr: Begin to handle PSR/PSR2 errors set by sink

eDP spec states that sink device will do a short pulse in HPD
line when there is a PSR/PSR2 error that needs to be handled by
source, this is handling the first and most simples error:
DP_PSR_SINK_INTERNAL_ERROR.

Here taking the safest approach and disabling PSR(at least until
the next modeset), to avoid multiple rendering issues due to
bad pannels.

v5:
added lockdep_assert in psr_disable and renamed psr_disable()
to intel_psr_disable_locked()

v4:
Using CAN_PSR instead of HAS_PSR in intel_psr_short_pulse

v3:
disabling PSR instead of exiting on error

Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180626201644.21932-2-jose.souza@intel.com

drm/i915/psr: Remove intel_crtc_state parameter from disable_source()

It was only used in VLV/CHV so after the removal of the PSR support
for those platforms it is not necessary any more.

v7: Rebased

Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180626201644.21932-1-jose.souza@intel.com

drm/i915/psr: Warn for erroneous enabling of both PSR1 and PSR2.

Depending whether PSR1 or PSR2 was configured, we print a warning if the
corresponding control mmio indicated PSR was erroneously enabled. As
Chris pointed out, it makes more sense to check for both the mmio's
since we expect neither PSR1 nor PSR2 to be enabled when psr_activate() is
called.

v2: Read PSR2 control register only on supported platforms (Rodrigo)

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180626090522.17682-1-dhinakaran.pandiyan@intel.com

drm/i915/psr: Fix race in intel_psr_work()

Commit 5422b37c907e ("drm/i915/psr: Kill delays when activating psr
back.") switched from delayed work to the plain variant and while doing so
removed the check for work_busy() before scheduling a PSR activation.
This appears to cause consecutive executions of psr_activate() in this
scenario - after a worker picks up the PSR work item for execution and
before the work function can acquire the PSR mutex, a psr_flush() can
get hold of the mutex and schedule another PSR work. Without a psr_exit()
between the two psr_activate() calls, warning messages get printed.
Further, since we drop the mutex in the midst of psr_work() to wait for
PSR to idle, another work item can also get scheduled. Fix this by
returning if PSR was already active.

Fixes: 5422b37c907e ("drm/i915/psr: Kill delays when activating psr back.")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106948
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625054741.3919-1-dhinakaran.pandiyan@intel.com

drm/i915/psr: Kill useless function pointers.

At some point we introduced the function pointers
on PSR code to help with VLV/CHV separation logic
because it had a different HW implementation from PSR.

Since all converged to HSW PSR and we dropped the
VLV/CHV support, let's also kill the useless function
pointers and leave the code cleaner.

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180626052536.15137-1-rodrigo.vivi@intel.com

drm/i915/ddi: Get AUX power domain for DP main link too

So far we got an AUX power domain reference only for the duration of DP
AUX transfers. However, the following suggests that we also need these
for main link functionality:
- The specification doesn't state whether it's needed or not for main
  link functionality, but suggests that these power wells need to be
  enabled already during display core initialization (Sequences to
  Initialize Display).
- For PSR we need to keep the AUX power well enabled.
- On ICL combo PHY ports (non-TC) the AUX power well is needed for
  link training too: while the port is enabled with a DP link training
  test pattern trying to toggle the AUX power well will time out.
- On ICL MG PHY ports (TC) the AUX power well is needed also for main
  link functionality (both in DP and HDMI modes).
- Windows enables these power wells both for main and AUX lane
  functionality.

Based on the above take an AUX power reference for main link
functionality too. This makes a difference only on GEN10+ (GLK+)
platforms, where we have separate port specific AUX power wells.

For PSR we still need to distinguish between port A and the other
ports, since on port A DC states must stay enabled for main link
functionality, but DC states must be disabled for driver initiated
AUX transfers. So re-use the corresponding helper from intel_psr.c.

Since we take now a reference for main link functionality on all DP
ports we can forgo taking the separate power ref for PSR functionality.

v2:
- Make sure DC states stay enabled when taking the ref on port A.
  (Ville)

v3: (Ville)
- Fix comment about logic for encoders without a crtc state and
  add FIXME note for a simplification to avoid calling get_power_domains
  in such cases.
- Use intel_crtc_has_dp_encoder() instead !intel_crtc_has_type(HDMI).

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
[Clarified code comments in intel_ddi_main_link_aux_domain() and
 intel_ddi_get_power_domains() (Imre)]
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180621184449.26634-1-imre.deak@intel.com

drm/i915: Context objects can never be active when freed

Due to how we only release the pining on the context state on
retirement and never track activity on the context vma itself, the
object can never be active at the point of release. Replace the
conditional transfer of ownership onto an active-reference with an
assert that the object is idle.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625100604.22598-2-chris@chris-wilson.co.uk

drm/i915/execlists: Check for ce->state before destroy

As we may cancel the ce->state allocation during context pinning (but
crucially after we mark ce as operational), that means we may be asked
to destroy a nonexistent ce->state. Given the choice in handing a
complex error path on pinning, and just ignoring the lack of state in
destroy, choice the latter for simplicity.

Reported-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625100604.22598-1-chris@chris-wilson.co.uk

drm/i915: Defer modeset cleanup to a secondary task

If we avoid cleaning up the old state immediately in
intel_atomic_commit_tail() and defer it to a second task, we can avoid
taking heavily contended locks when the caller is ready to procede.
Subsequent modesets will wait for the cleanup operation (either directly
via the ordered modeset wq or indirectly through the atomic helperr)
which keeps the number of inflight cleanup tasks in check.

As an example, during reset an immediate modeset is performed to disable
the displays before the HW is reset, which must avoid struct_mutex to
avoid recursion. Moving the cleanup to a separate task, defers acquiring
the struct_mutex to after the GPU is running again, allowing it to
complete. Even in a few patches time (optimist!) when we no longer
require struct_mutex to unpin the framebuffers, it will still be good
practice to minimise the number of contention points along reset. The
mutex dependency still exists (as one modeset flushes the other), but in
the short term it resolves the deadlock for simple reset cases.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101600
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180623103951.23889-1-chris@chris-wilson.co.uk
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915/guc: Remove USES_GUC_SUBMISSION for ads programming

In the guc_ctl_debug_flags, the ads struct is programmed only
when USES_GUC_SUBMISSION is satisfied. But, this has to be
programmed for all suspend/resume cases.
Remove the condition and program the ads struct for
both huc loading and guc submission.

This issue was noticed when CI threw errors for enable_guc=2
(load huc; disable submission)

v2:
- Change commit title.
- Correct the shifts. (Daniele)

Credits to: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Spotswood <john.a.spotswood@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: John Spotswood <john.a.spotswood@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1529691543-28606-1-git-send-email-anusha.srivatsa@intel.com

drm/i915: Enable hw workaround to bypass alpha

Alpha blending with alpha 0 and 0xff passes through
alpha math and rounding logic causing differences
compared to fully transparent or opaque plane,resulting
in CRC mismatch.
This WA on icl and above enables hardware to bypass alpha
math and rounding for per pixel alpha values of 00 and 0xff

v2: Fix patchwork checkpatch warnings.

Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1529594036-25036-1-git-send-email-vandita.kulkarni@intel.com

drm/i915/icl: Do read-modify-write as needed during MG PLL programming

Some MG PLL registers have fields that need to be preserved at their HW
default or BIOS programmed values. So make sure we preserve them.

v2:
- Add comment to icl_mg_pll_write() explaining the need for register
  masks. (Vandita)
- Fix patchwork checkpatch warning.

v3:
- Rebase on drm-tip.

Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: James Ausmus <james.ausmus@intel.com> (v1)
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180619164115.7835-1-imre.deak@intel.com

drm/i915/icl: Fix MG PLL setup when refclk is 38.4MHz

Atm we're zeroing out fields in MG_PLL_BIAS and MG_PLL_TDC_COLDST_BIAS
if refclk is 38.4MHz, whereas the spec tells us to preserve them.
Although the calculated values mostly match the register defaults even
for the 38.4MHz case, there are some differences wrt. what BIOS
programs (I noticed at least differences in the MG_PLL_BIAS/IREFTRIM and
MG_PLL_BIAS/BIASCAL_EN fields). In the lack of further info on how to
program these fields, just do what the spec says and preserve the BIOS
state.

v2:
- Preserve the BIOS programmed reg fields instead of programming them.

Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: James Ausmus <james.ausmus@intel.com> (v1)
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180615143911.31082-1-imre.deak@intel.com

drm/i915: remove check for aux irq

This became dead code with commit 309bd8ed464f ("drm/i915: Reinstate
GMBUS and AUX interrupts on gen4/g4x").

v2: Move comment about HW behavior to where decision is made to enable
MSI (Ville).

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180523180435.18042-1-lucas.demarchi@intel.com

drm/i915: Redefine EINVAL for debugging

To aide debugging spurious EINVALs, include a debug message every time
we emit one from execbuf.

References: https://bugs.freedesktop.org/show_bug.cgi?id=106744
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180621080150.8110-1-chris@chris-wilson.co.uk

drm/i915: Ignore applying the self-relocation BIAS if no relocations

We only need to apply the BIAS for self-relocations into the batchbuffer
iff the execobject has any relocations.

This suppresses some warnings we may get with a full gtt (so the batch
object has wound up at 0 from a previous invocation), but doesn't fix
the underlying problem of how we tried to move a pinned batch vma (how
we have a pinned user vma outside of execbuf, I do not know, though this
being on an aliasing ppgtt means it could be a spurious pinning via the
global gtt). One step at a time...

References: https://bugs.freedesktop.org/show_bug.cgi?id=106744#c1
Testcase: igt/gem_exec_gttfill # byt (sporadic)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180621073205.26701-1-chris@chris-wilson.co.uk

drm/i915: Disable bh around call to tasklet

The guc submission backends expects to only be run from (at least)
softirq context, but during our intel_engine_is_idle() check we would
call into the tasklet to make sure it was flushed. As this could occur
from process context, occasionally we would be caught out using a
wait_for_atomic() not from an atomic context:

[   59.939091] WARN_ON_ONCE((1) && !(preempt_count() != 0))
[   59.939142] WARNING: CPU: 1 PID: 2901 at drivers/gpu/drm/i915/intel_guc_submission.c:615 guc_submission_tasklet+0x784/0xa90 [i915]
[   59.939143] Modules linked in: vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic i915 x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul snd_hda_intel crc32_pclmul snd_hda_codec ghash_clmulni_intel snd_hwdep snd_hda_core e1000e snd_pcm mei_me mei prime_numbers
[   59.939164] CPU: 1 PID: 2901 Comm: gem_exec_schedu Tainted: G     U  W         4.18.0-rc1-g93475d62c730-drmtip_67+ #1
[   59.939165] Hardware name: System manufacturer System Product Name/Z170M-PLUS, BIOS 3610 03/29/2018
[   59.939188] RIP: 0010:guc_submission_tasklet+0x784/0xa90 [i915]
[   59.939189] Code: fc ff ff 80 3d 2f 87 11 00 00 0f 85 80 fb ff ff 48 c7 c6 f8 49 40 c0 48 c7 c7 80 41 3e c0 c6 05 14 87 11 00 01 e8 2c ea d6 d3 <0f> 0b e9 5f fb ff ff 8b 46 38 89 cf 31 c7 83 e7 c0 75 08 39 c1 0f
[   59.939253] RSP: 0018:ffffaafe08a03c10 EFLAGS: 00010286
[   59.939255] RAX: 0000000000000000 RBX: ffff8f9112c246f0 RCX: 0000000000000001
[   59.939256] RDX: 0000000080000001 RSI: ffffffff95086d8e RDI: 00000000ffffffff
[   59.939257] RBP: ffff8f9112c24680 R08: 000000009517be77 R09: 0000000000000000
[   59.939258] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8f9112c24700
[   59.939259] R13: ffff8f9112c24700 R14: 0000000000000000 R15: ffff8f9112c242a8
[   59.939260] FS:  00007fc2cc7e5980(0000) GS:ffff8f9136c40000(0000) knlGS:0000000000000000
[   59.939261] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   59.939262] CR2: 00007fc2cc815040 CR3: 000000021f10e003 CR4: 00000000003606e0
[   59.939263] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   59.939264] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   59.939265] Call Trace:
[   59.939288]  ? intel_engine_is_idle+0x64/0x160 [i915]
[   59.939323]  ? intel_engine_dump+0x638/0x890 [i915]
[   59.939327]  ? seq_printf+0x49/0x70
[   59.939353]  ? i915_engine_info+0xc8/0x100 [i915]
[   59.939356]  ? drm_get_color_range_name+0x20/0x20
[   59.939361]  ? seq_read+0xf1/0x470
[   59.939365]  ? trace_hardirqs_on_caller+0xe0/0x1b0
[   59.939370]  ? full_proxy_read+0x51/0x80
[   59.939389]  ? __vfs_read+0x31/0x170
[   59.939395]  ? do_sys_open+0x13b/0x240
[   59.939398]  ? rcu_read_lock_sched_held+0x6f/0x80
[   59.939401]  ? vfs_read+0x9e/0x140
[   59.939404]  ? ksys_read+0x50/0xc0
[   59.939409]  ? do_syscall_64+0x55/0x190
[   59.939412]  ? entry_SYSCALL_64_after_hwframe+0x49/0xbe
[   59.939420] irq event stamp: 552834
[   59.939422] hardirqs last  enabled at (552833): [<ffffffff940fc74c>] console_unlock+0x3fc/0x600
[   59.939425] hardirqs last disabled at (552834): [<ffffffff94a0111c>] error_entry+0x7c/0x100
[   59.939451] softirqs last  enabled at (552614): [<ffffffffc02e0f53>] i915_request_add+0x2e3/0x7b0 [i915]
[   59.939470] softirqs last disabled at (552604): [<ffffffffc02e0ecb>] i915_request_add+0x25b/0x7b0 [i915]

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106977
Fixes: dd0cf235d81f ("drm/i915: Speed up idle detection by kicking the tasklets")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180620135929.23956-1-chris@chris-wilson.co.uk

drm/i915: Update DRIVER_DATE to 20180620

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>