parisc: ccio-dma: Add missing iounmap in error path in ccio_probe()

[ Upstream commit 38238be4e881a5d0abbe4872b4cd6ed790be06c8 ]

Add missing iounmap() before return from ccio_probe(), if ccio_init_resources()
fails.

Fixes: d46c742f827f ("parisc: ccio-dma: Handle kmalloc failure in ccio_init_resources()")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block: blk_queue_enter() / __bio_queue_enter() must return -EAGAIN for nowait

[ Upstream commit 56f99b8d06ef1ed1c9730948f9f05ac2b930a20b ]

Today blk_queue_enter() and __bio_queue_enter() return -EBUSY for the
nowait code path. This is not correct: they should return -EAGAIN
instead.

This problem was detected by fio. The following command exposed the
above problem:

t/io_uring -p0 -d128 -b4096 -s32 -c32 -F1 -B0 -R0 -X1 -n24 -P1 -u1 -O0 /dev/ng0n1

By applying the patch, the retry case is handled correctly in the slow
path.

Signed-off-by: Stefan Roesch <shr@fb.com>
Fixes: bfd343aa1718 ("blk-mq: don't wait in blk_mq_queue_enter() if __GFP_WAIT isn't set")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/meson: Fix OSD1 RGB to YCbCr coefficient

[ Upstream commit 6463d3930ba5b6addcfc8f80a4543976a2fc7656 ]

VPP_WRAP_OSD1_MATRIX_COEF22.Coeff22 is documented as being bits 0-12,
not 16-28.

Without this the output tends to have a pink hue, changing it results
in better color accuracy.

The vendor kernel doesn't use this register. However the code which
sets VIU2_OSD1_MATRIX_COEF22 also uses bits 0-12. There is a slightly
different style of registers for configuring some of the other matrices,
which do use bits 16-28 for this coefficient, but those have names
ending in MATRIX_COEF22_30, and this is not one of those.

Signed-off-by: Stuart Menefy <stuart.menefy@mathembedded.com>
Fixes: 728883948b0d ("drm/meson: Add G12A Support for VIU setup")
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908155243.687143-1-stuart.menefy@mathembedded.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/meson: Correct OSD1 global alpha value

[ Upstream commit 6836829c8ea453c9e3e518e61539e35881c8ed5f ]

VIU_OSD1_CTRL_STAT.GLOBAL_ALPHA is a 9 bit field, so the maximum
value is 0x100 not 0xff.

This matches the vendor kernel.

Signed-off-by: Stuart Menefy <stuart.menefy@mathembedded.com>
Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller")
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908155103.686904-1-stuart.menefy@mathembedded.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: mpc8xxx: Fix support for IRQ_TYPE_LEVEL_LOW flow_type in mpc85xx

[ Upstream commit 279c12df8d2efb28def9d037f288cbfb97c30fe2 ]

Commit e39d5ef67804 ("powerpc/5xxx: extend mpc8xxx_gpio driver to support
mpc512x gpios") implemented support for IRQ_TYPE_LEVEL_LOW flow type in
mpc512x via falling edge type. Do same for mpc85xx which support was added
in commit 345e5c8a1cc3 ("powerpc: Add interrupt support to mpc8xxx_gpio").

Fixes probing of lm90 hwmon driver on mpc85xx based board which use level
interrupt. Without it kernel prints error and refuse lm90 to work:

    [   15.258370] genirq: Setting trigger mode 8 for irq 49 failed (mpc8xxx_irq_set_type+0x0/0xf8)
    [   15.267168] lm90 0-004c: cannot request IRQ 49
    [   15.272708] lm90: probe of 0-004c failed with error -22

Fixes: 345e5c8a1cc3 ("powerpc: Add interrupt support to mpc8xxx_gpio")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4: Turn off open-by-filehandle and NFS re-export for NFSv4.0

[ Upstream commit 2a9d683b48c8a87e61a4215792d44c90bcbbb536 ]

The NFSv4.0 protocol only supports open() by name. It cannot therefore
be used with open_by_handle() and friends, nor can it be re-exported by
knfsd.

Reported-by: Chuck Lever III <chuck.lever@oracle.com>
Fixes: 20fa19027286 ("nfs: add export operations")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: sunxi: Fix name for A100 R_PIO

[ Upstream commit 76648c867c6c03b8a468d9c9222025873ecc613d ]

The name of A100 R_PIO driver should be sun50i-a100-r-pinctrl,
not sun50iw10p1-r-pinctrl.

Fixes: 473436e7647d6 ("pinctrl: sunxi: add support for the Allwinner A100 pin controller")
Signed-off-by: Michael Wu <michael@allwinnertech.com>
Acked-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220819024541.74191-1-michael@allwinnertech.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: rockchip: Enhance support for IRQ_TYPE_EDGE_BOTH

[ Upstream commit b871656aa4f54e04207f62bdd0d7572be1d86b36 ]

Switching between falling/rising edges for IRQ_TYPE_EDGE_BOTH on pins that
require debounce can cause the device to lose events due to a desync
between pin state and irq type.

This problem is resolved by switching between IRQ_TYPE_LEVEL_LOW and
IRQ_TYPE_LEVEL_HIGH instead.

Fixes: 936ee2675eee ("gpio/rockchip: add driver for rockchip gpio")
Signed-off-by: João H. Spies <jhlspies@gmail.com>
Link: https://lore.kernel.org/r/20220808025121.110223-1-jhlspies@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: qcom: sc8180x: Fix wrong pin numbers

[ Upstream commit 48ec73395887694f13c9452b4dcfb43710451757 ]

The pin numbers for UFS_RESET and SDC2_* are not
consistent in the pinctrl driver for sc8180x.
So fix it.

Signed-off-by: Molly Sophia <mollysophia379@gmail.com>
Fixes: 97423113ec4b ("pinctrl: qcom: Add sc8180x TLMM driver")
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220807122645.13830-3-mollysophia379@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: qcom: sc8180x: Fix gpio_wakeirq_map

[ Upstream commit 6124cec530c7d8faab96d340ab2df5161e5d1c8a ]

Currently in the wakeirq_map, gpio36 and gpio37 have the same wakeirq
number, resulting in gpio37 being unable to trigger interrupts.
It looks like that this is a typo in the wakeirq map. So fix it.

Signed-off-by: Molly Sophia <mollysophia379@gmail.com>
Fixes: 97423113ec4b ("pinctrl: qcom: Add sc8180x TLMM driver")
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220807122645.13830-2-mollysophia379@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

of: fdt: fix off-by-one error in unflatten_dt_nodes()

[ Upstream commit 2f945a792f67815abca26fa8a5e863ccf3fa1181 ]

Commit 78c44d910d3e ("drivers/of: Fix depth when unflattening devicetree")
forgot to fix up the depth check in the loop body in unflatten_dt_nodes()
which makes it possible to overflow the nps[] buffer...

Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.

Fixes: 78c44d910d3e ("drivers/of: Fix depth when unflattening devicetree")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/7c354554-006f-6b31-c195-cdfe4caee392@omp.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: serial: atmel: Preserve previous USART mode if RS485 disabled

[ Upstream commit 692a8ebcfc24f4a5bea0eb2967e450f584193da6 ]

Whenever the atmel_rs485_config() driver method would be called,
the USART mode is reset to normal mode before even checking if
RS485 flag is set, thus resulting in losing the previous USART
mode in the case where the checking fails.

Some tools, such as `linux-serial-test`, lead to the driver calling
this method when doing the setup of the serial port: after setting the
port mode (Hardware Flow Control, Normal Mode, RS485 Mode, etc.),
`linux-serial-test` tries to enable/disable RS485 depending on
the commandline arguments that were passed.

Example of how this issue could reveal itself:
When doing a serial communication with Hardware Flow Control through
`linux-serial-test`, the tool would lead to the driver roughly doing
the following:
- set the corresponding bit to 1 (ATMEL_US_USMODE_HWHS bit in the
ATMEL_US_MR register) through the atmel_set_termios() to enable
Hardware Flow Control
- disable RS485 through the atmel_config_rs485() method
Thus, when the latter is called, the mode will be reset and the
previously set bit is unset, leaving USART in normal mode instead of
the expected Hardware Flow Control mode.

This fix ensures that this reset is only done if the checking for
RS485 succeeds and that the previous mode is preserved otherwise.

Fixes: e8faff7330a35 ("ARM: 6092/1: atmel_serial: support for RS485 communications")
Cc: stable <stable@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
Link: https://lore.kernel.org/r/20220824142902.502596-1-sergiu.moga@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: atmel: remove redundant assignment in rs485_config

[ Upstream commit 60efd0513916f195dd85bfbf21653f74f9ab019c ]

In uart_set_rs485_config() the serial core already assigns the passed
serial_rs485 struct to the uart port.

So remove the assignment from the drivers rs485_config() function to avoid
redundancy.

Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Link: https://lore.kernel.org/r/20220410104642.32195-10-LinoSanfilippo@gmx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 692a8ebcfc24 ("tty: serial: atmel: Preserve previous USART mode if RS485 disabled")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/tegra: vic: Fix build warning when CONFIG_PM=n

[ Upstream commit b5d5288a46876f6767950449aea310f71ac86277 ]

drivers/gpu/drm/tegra/vic.c:326:12: error: ‘vic_runtime_suspend’ defined but not used [-Werror=unused-function]
 static int vic_runtime_suspend(struct device *dev)
            ^~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/tegra/vic.c:292:12: error: ‘vic_runtime_resume’ defined but not used [-Werror=unused-function]
 static int vic_runtime_resume(struct device *dev)
            ^~~~~~~~~~~~~~~~~~

Mark it as __maybe_unused.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Stable-dep-of: c7860cbee998 ("drm/tegra: Fix vmapping of prime buffers")
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 5.15.69

Link: https://lore.kernel.org/r/20220916100446.916515275@linuxfoundation.org
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: goodix - add compatible string for GT1158

commit 80b9ebd3e478cd41526cbf84f80c3e0eb885d1d3 upstream.

Add compatible string for GT1158 missing from the previous patch.

Fixes: 425fe4709c76 ("Input: goodix - add support for GT1158")
Signed-off-by: Jarrah Gosbell <kernel@undef.tools>
Link: https://lore.kernel.org/r/20220813043821.9981-1-kernel@undef.tools
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/irdma: Use s/g array in post send only when its valid

commit 2c8844431d065ae15a6b442f5769b60aeaaa07af upstream.

Send with invalidate verb call can pass in an
uninitialized s/g array with 0 sge's which is
filled into irdma WQE and causes a HW asynchronous
event.

Fix this by using the s/g array in irdma post send
only when its valid.

Fixes: 551c46e ("RDMA/irdma: Add user/kernel shared libraries")
Signed-off-by: Sindhu-Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20220906223244.1119-5-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: f_uac2: fix superspeed transfer

commit f511aef2ebe5377d4c263842f2e0c0b8e274e8e5 upstream.

On page 362 of the USB3.2 specification (
https://usb.org/sites/default/files/usb_32_20210125.zip),
The 'SuperSpeed Endpoint Companion Descriptor' shall only be returned
by Enhanced SuperSpeed devices that are operating at Gen X speed.
Each endpoint described in an interface is followed by a 'SuperSpeed
Endpoint Companion Descriptor'.

If users use SuperSpeed UDC, host can't recognize the device if endpoint
doesn't have 'SuperSpeed Endpoint Companion Descriptor' followed.

Currently in the uac2 driver code:
1. ss_epout_desc_comp follows ss_epout_desc;
2. ss_epin_fback_desc_comp follows ss_epin_fback_desc;
3. ss_epin_desc_comp follows ss_epin_desc;
4. Only ss_ep_int_desc endpoint doesn't have 'SuperSpeed Endpoint
Companion Descriptor' followed, so we should add it.

Fixes: eaf6cbe09920 ("usb: gadget: f_uac2: add volume and mute support")
Cc: stable <stable@kernel.org>
Signed-off-by: Jing Leng <jleng@ambarella.com>
Signed-off-by: Jack Pham <quic_jackp@quicinc.com>
Link: https://lore.kernel.org/r/20220721014815.14453-1-quic_jackp@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: f_uac2: clean up some inconsistent indenting

commit 18d6b39ee8959c6e513750879b52fd215533cc87 upstream.

There are bunch of statements where the indentation is not correct,
clean these up.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210902224758.57600-1-colin.king@canonical.com
Signed-off-by: Jack Pham <quic_jackp@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

soc: fsl: select FSL_GUTS driver for DPIO

commit 9a472613f5bccf1b36837423495ae592a9c5182f upstream.

The soc/fsl/dpio driver will perform a soc_device_match()
to determine the optimal cache settings for a given CPU core.

If FSL_GUTS is not enabled, this search will fail and
the driver will not configure cache stashing for the given
DPIO, and a string of "unknown SoC" messages will appear:

fsl_mc_dpio dpio.7: unknown SoC version
fsl_mc_dpio dpio.6: unknown SoC version
fsl_mc_dpio dpio.5: unknown SoC version

Fixes: 51da14e96e9b ("soc: fsl: dpio: configure cache stashing destination")
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220901052149.23873-2-matt@traverse.com.au'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: Fix TLB flush for not-first PFNMAP mappings in unmap_region()

This is a stable-specific patch.
I botched the stable-specific rewrite of
commit b67fbebd4cf98 ("mmu_gather: Force tlb-flush VM_PFNMAP vmas"):
As Hugh pointed out, unmap_region() actually operates on a list of VMAs,
and the variable "vma" merely points to the first VMA in that list.
So if we want to check whether any of the VMAs we're operating on is
PFNMAP or MIXEDMAP, we have to iterate through the list and check each VMA.

Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: storage: Add ASUS <0x0b05:0x1932> to IGNORE_UAS

[ Upstream commit c61feaee68b9735be06f162bc046c7f1959efb0c ]

USB external storage device(0x0b05:1932), use gnome-disk-utility tools
to test usb write  < 30MB/s.
if does not to load module of uas for this device, can increase the
write speed from 20MB/s to >40MB/s.

Suggested-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Hu Xiaoying <huxiaoying@kylinos.cn>
Link: https://lore.kernel.org/r/20220901045737.3438046-1-huxiaoying@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: acer-wmi: Acer Aspire One AOD270/Packard Bell Dot keymap fixes

[ Upstream commit c3b82d26bc85f5fc2fef5ec8cce17c89633a55a8 ]

2 keymap fixes for the Acer Aspire One AOD270 and the same hardware
rebranded as Packard Bell Dot SC:

1. The F2 key is marked with a big '?' symbol on the Packard Bell Dot SC,
this sends WMID_HOTKEY_EVENTs with a scancode of 0x27 add a mapping
for this.

2. Scancode 0x61 is KEY_SWITCHVIDEOMODE. Usually this is a duplicate
input event with the "Video Bus" input device events. But on these devices
the "Video Bus" does not send events for this key. Map 0x61 to KEY_UNKNOWN
instead of using KE_IGNORE so that udev/hwdb can override it on these devs.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220829163544.5288-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/arm_pmu_platform: fix tests for platform_get_irq() failure

[ Upstream commit 6bb0d64c100091e131cd16710b62fda3319cd0af ]

The platform_get_irq() returns negative error codes.  It can't actually
return zero.

Signed-off-by: Yu Zhe <yuzhe@nfschina.com>
Link: https://lore.kernel.org/r/20220825011844.8536-1-yuzhe@nfschina.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: hellcreek: Print warning only once

[ Upstream commit 52267ce25f60f37ae40ccbca0b21328ebae5ae75 ]

In case the source port cannot be decoded, print the warning only once. This
still brings attention to the user and does not spam the logs at the same time.

Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220830163448.8921-1-kurt@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/amdgpu: skip ucode loading if ucode_size == 0

[ Upstream commit 39c84b8e929dbd4f63be7e04bf1a2bcd92b44177 ]

Restrict the ucode loading check to avoid frontdoor loading error.

Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvmet-tcp: fix unhandled tcp states in nvmet_tcp_state_change()

[ Upstream commit 478814a5584197fa1fb18377653626e3416e7cd6 ]

TCP_FIN_WAIT2 and TCP_LAST_ACK were not handled, the connection is closing
so we can ignore them and avoid printing the "unhandled state"
warning message.

[ 1298.852386] nvmet_tcp: queue 2 unhandled state 5
[ 1298.879112] nvmet_tcp: queue 7 unhandled state 5
[ 1298.884253] nvmet_tcp: queue 8 unhandled state 5
[ 1298.889475] nvmet_tcp: queue 9 unhandled state 5

v2: Do not call nvmet_tcp_schedule_release_queue(), just ignore
the fin_wait2 and last_ack states.

Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: iforce - add support for Boeder Force Feedback Wheel

[ Upstream commit 9c9c71168f7979f3798b61c65b4530fbfbcf19d1 ]

Add a new iforce_device entry to support the Boeder Force Feedback Wheel
device.

Signed-off-by: Greg Tulli <greg.iforce@gmail.com>
Link: https://lore.kernel.org/r/3256420-c8ac-31b-8499-3c488a9880fd@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ieee802154: cc2520: add rc code in cc2520_tx()

[ Upstream commit ffd7bdddaab193c38416fd5dd416d065517d266e ]

The rc code is 0 at the error path "status & CC2520_STATUS_TX_UNDERFLOW".
Assign rc code with '-EINVAL' at this error path to fix it.

Signed-off-by: Li Qiong <liqiong@nfschina.com>
Link: https://lore.kernel.org/r/20220829071259.18330-1-liqiong@nfschina.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: mockup: remove gpio debugfs when remove device

[ Upstream commit 303e6da99429510b1e4edf833afe90ac8542e747 ]

GPIO mockup debugfs is created in gpio_mockup_probe() but
forgot to remove when remove device. This patch add a devm
managed callback for removing them.

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tg3: Disable tg3 device on system reboot to avoid triggering AER

[ Upstream commit 2ca1c94ce0b65a2ce7512b718f3d8a0fe6224bca ]

Commit d60cd06331a3 ("PM: ACPI: reboot: Use S5 for reboot") caused a
reboot hang on one Dell servers so the commit was reverted.

Someone managed to collect the AER log and it's caused by MSI:
[ 148.762067] ACPI: Preparing to enter system sleep state S5
[ 148.794638] {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 5
[ 148.803731] {1}[Hardware Error]: event severity: recoverable
[ 148.810191] {1}[Hardware Error]: Error 0, type: fatal
[ 148.816088] {1}[Hardware Error]: section_type: PCIe error
[ 148.822391] {1}[Hardware Error]: port_type: 0, PCIe end point
[ 148.829026] {1}[Hardware Error]: version: 3.0
[ 148.834266] {1}[Hardware Error]: command: 0x0006, status: 0x0010
[ 148.841140] {1}[Hardware Error]: device_id: 0000:04:00.0
[ 148.847309] {1}[Hardware Error]: slot: 0
[ 148.852077] {1}[Hardware Error]: secondary_bus: 0x00
[ 148.857876] {1}[Hardware Error]: vendor_id: 0x14e4, device_id: 0x165f
[ 148.865145] {1}[Hardware Error]: class_code: 020000
[ 148.870845] {1}[Hardware Error]: aer_uncor_status: 0x00100000, aer_uncor_mask: 0x00010000
[ 148.879842] {1}[Hardware Error]: aer_uncor_severity: 0x000ef030
[ 148.886575] {1}[Hardware Error]: TLP Header: 40000001 0000030f 90028090 00000000
[ 148.894823] tg3 0000:04:00.0: AER: aer_status: 0x00100000, aer_mask: 0x00010000
[ 148.902795] tg3 0000:04:00.0: AER: [20] UnsupReq (First)
[ 148.910234] tg3 0000:04:00.0: AER: aer_layer=Transaction Layer, aer_agent=Requester ID
[ 148.918806] tg3 0000:04:00.0: AER: aer_uncor_severity: 0x000ef030
[ 148.925558] tg3 0000:04:00.0: AER: TLP Header: 40000001 0000030f 90028090 00000000

The MSI is probably raised by incoming packets, so power down the device
and disable bus mastering to stop the traffic, as user confirmed this
approach works.

In addition to that, be extra safe and cancel reset task if it's running.

Cc: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/all/b8db79e6857c41dab4ef08bdf826ea7c47e3bafc.1615947283.git.josef@toxicpanda.com/
BugLink: https://bugs.launchpad.net/bugs/1917471
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20220826002530.1153296-1-kai.heng.feng@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hid: intel-ish-hid: ishtp: Fix ishtp client sending disordered message

[ Upstream commit e1fa076706209cc447d7a2abd0843a18277e5ef7 ]

There is a timing issue captured during ishtp client sending stress tests.
It was observed during stress tests that ISH firmware is getting out of
ordered messages. This is a rare scenario as the current set of ISH client
drivers don't send much data to firmware. But this may not be the case
going forward.

When message size is bigger than IPC MTU, ishtp splits the message into
fragments and uses serialized async method to send message fragments.
The call stack:
ishtp_cl_send_msg_ipc->ipc_tx_callback(first fregment)->
ishtp_send_msg(with callback)->write_ipc_to_queue->
write_ipc_from_queue->callback->ipc_tx_callback(next fregment)......

When an ipc write complete interrupt is received, driver also calls
write_ipc_from_queue->ipc_tx_callback in ISR to start sending of next fragment.

Through ipc_tx_callback uses spin_lock to protect message splitting, as the
serialized sending method will call back to ipc_tx_callback again, so it doesn't
put sending under spin_lock, it causes driver cannot guarantee all fragments
be sent in order.

Considering this scenario:
ipc_tx_callback just finished a fragment splitting, and not call ishtp_send_msg
yet, there is a write complete interrupt happens, then ISR->write_ipc_from_queue
->ipc_tx_callback->ishtp_send_msg->write_ipc_to_queue......

Because ISR has higher exec priority than normal thread, this causes the new
fragment be sent out before previous fragment. This disordered message causes
invalid message to firmware.

The solution is, to send fragments synchronously:
Use ishtp_write_message writing fragments into tx queue directly one by one,
instead of ishtp_send_msg only writing one fragment with completion callback.
As no completion callback be used, so change ipc_tx_callback to ipc_tx_send.

Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: ishtp-hid-clientHID: ishtp-hid-client: Fix comment typo

[ Upstream commit 94553f8a218540d676efbf3f7827ed493d1057cf ]

The double `like' is duplicated in the comment, remove one.

Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dt-bindings: iio: gyroscope: bosch,bmg160: correct number of pins

[ Upstream commit 767470209cedbe2cc72ba38d77c9f096d2c7694c ]

BMG160 has two interrupt pins to which interrupts can be freely mapped.
Correct the schema to express such case and fix warnings like:

  qcom/msm8916-alcatel-idol347.dtb: gyroscope@68: interrupts: [[97, 1], [98, 1]] is too long

However the basic issue still persists - the interrupts should come in a
defined order.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220805075503.16983-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/rd: Fix FIFO-full deadlock

[ Upstream commit 174974d8463b77c2b4065e98513adb204e64de7d ]

If the previous thing cat'ing $debugfs/rd left the FIFO full, then
subsequent open could deadlock in rd_write() (because open is blocked,
not giving a chance for read() to consume any data in the FIFO).  Also
it is generally a good idea to clear out old data from the FIFO.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/496706/
Link: https://lore.kernel.org/r/20220807160901.2353471-2-robdclark@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/surface: aggregator_registry: Add support for Surface Laptop Go 2

[ Upstream commit 84b8e403435c8fb94b872309673764a447961e00 ]

The Surface Laptop Go 2 seems to have the same SAM client devices as the
Surface Laptop Go 1, so re-use its node group.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220810140133.99087-1-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: goodix - add support for GT1158

[ Upstream commit 425fe4709c76e35f93f4c0e50240f0b61b2a2e54 ]

This controller is used by PinePhone and PinePhone Pro. Support for
the PinePhone Pro will be added in a later patch set.

Signed-off-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Jarrah Gosbell <kernel@undef.tools>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220809091200.290492-1-kernel@undef.tools
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/vt-d: Fix kdump kernels boot failure with scalable mode

[ Upstream commit 0c5f6c0d8201a809a6585b07b6263e9db2c874a3 ]

The translation table copying code for kdump kernels is currently based
on the extended root/context entry formats of ECS mode defined in older
VT-d v2.5, and doesn't handle the scalable mode formats. This causes
the kexec capture kernel boot failure with DMAR faults if the IOMMU was
enabled in scalable mode by the previous kernel.

The ECS mode has already been deprecated by the VT-d spec since v3.0 and
Intel IOMMU driver doesn't support this mode as there's no real hardware
implementation. Hence this converts ECS checking in copying table code
into scalable mode.

The existing copying code consumes a bit in the context entry as a mark
of copied entry. It needs to work for the old format as well as for the
extended context entries. As it's hard to find such a common bit for both
legacy and scalable mode context entries. This replaces it with a per-
IOMMU bitmap.

Fixes: 7373a8cc38197 ("iommu/vt-d: Setup context and enable RID2PASID support")
Cc: stable@vger.kernel.org
Reported-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Wen Jin <wen.jin@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20220817011035.3250131-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracefs: Only clobber mode/uid/gid on remount if asked

[ Upstream commit 47311db8e8f33011d90dee76b39c8886120cdda4 ]

Users may have explicitly configured their tracefs permissions; we
shouldn't overwrite those just because a second mount appeared.

Only clobber if the options were provided at mount time.

Note: the previous behavior was especially surprising in the presence of
automounted /sys/kernel/debug/tracing/.

Existing behavior:

  ## Pre-existing status: tracefs is 0755.
  # stat -c '%A' /sys/kernel/tracing/
  drwxr-xr-x

  ## (Re)trigger the automount.
  # umount /sys/kernel/debug/tracing
  # stat -c '%A' /sys/kernel/debug/tracing/.
  drwx------

  ## Unexpected: the automount changed mode for other mount instances.
  # stat -c '%A' /sys/kernel/tracing/
  drwx------

New behavior (after this change):

  ## Pre-existing status: tracefs is 0755.
  # stat -c '%A' /sys/kernel/tracing/
  drwxr-xr-x

  ## (Re)trigger the automount.
  # umount /sys/kernel/debug/tracing
  # stat -c '%A' /sys/kernel/debug/tracing/.
  drwxr-xr-x

  ## Expected: the automount does not change other mount instances.
  # stat -c '%A' /sys/kernel/tracing/
  drwxr-xr-x

Link: https://lkml.kernel.org/r/20220826174353.2.Iab6e5ea57963d6deca5311b27fb7226790d44406@changeid
Cc: stable@vger.kernel.org
Fixes: 4282d60689d4f ("tracefs: Add new tracefs file system")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing: hold caller_addr to hardirq_{enable,disable}_ip

[ Upstream commit 54c3931957f6a6194d5972eccc36d052964b2abe ]

Currently, The arguments passing to lockdep_hardirqs_{on,off} was fixed
in CALLER_ADDR0.
The function trace_hardirqs_on_caller should have been intended to use
caller_addr to represent the address that caller wants to be traced.

For example, lockdep log in riscv showing the last {enabled,disabled} at
__trace_hardirqs_{on,off} all the time(if called by):
[   57.853175] hardirqs last  enabled at (2519): __trace_hardirqs_on+0xc/0x14
[   57.853848] hardirqs last disabled at (2520): __trace_hardirqs_off+0xc/0x14

After use trace_hardirqs_xx_caller, we can get more effective information:
[   53.781428] hardirqs last  enabled at (2595): restore_all+0xe/0x66
[   53.782185] hardirqs last disabled at (2596): ret_from_exception+0xa/0x10

Link: https://lkml.kernel.org/r/20220901104515.135162-2-zouyipeng@huawei.com
Cc: stable@vger.kernel.org
Fixes: c3bc8fd637a96 ("tracing: Centralize preemptirq tracepoints and unify their usage")
Signed-off-by: Yipeng Zou <zouyipeng@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

task_stack, x86/cea: Force-inline stack helpers

[ Upstream commit e87f4152e542610d0b4c6c8548964a68a59d2040 ]

Force-inline two stack helpers to fix the following objtool warnings:

  vmlinux.o: warning: objtool: in_task_stack()+0xc: call to task_stack_page() leaves .noinstr.text section
  vmlinux.o: warning: objtool: in_entry_stack()+0x10: call to cpu_entry_stack() leaves .noinstr.text section

Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220324183607.31717-2-bp@alien8.de
Stable-dep-of: 54c3931957f6 ("tracing: hold caller_addr to hardirq_{enable,disable}_ip")
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/mm: Force-inline __phys_addr_nodebug()

[ Upstream commit ace1a98519270c586c0d4179419292df67441cd1 ]

Fix:

  vmlinux.o: warning: objtool: __sev_es_nmi_complete()+0x8b: call to __phys_addr_nodebug() leaves .noinstr.text section

Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220324183607.31717-4-bp@alien8.de
Stable-dep-of: 54c3931957f6 ("tracing: hold caller_addr to hardirq_{enable,disable}_ip")
Signed-off-by: Sasha Levin <sashal@kernel.org>

lockdep: Fix -Wunused-parameter for _THIS_IP_

[ Upstream commit 8b023accc8df70e72f7704d29fead7ca914d6837 ]

While looking into a bug related to the compiler's handling of addresses
of labels, I noticed some uses of _THIS_IP_ seemed unused in lockdep.
Drive by cleanup.

-Wunused-parameter:
kernel/locking/lockdep.c:1383:22: warning: unused parameter 'ip'
kernel/locking/lockdep.c:4246:48: warning: unused parameter 'ip'
kernel/locking/lockdep.c:4844:19: warning: unused parameter 'ip'

Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Link: https://lore.kernel.org/r/20220314221909.2027027-1-ndesaulniers@google.com
Stable-dep-of: 54c3931957f6 ("tracing: hold caller_addr to hardirq_{enable,disable}_ip")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: at91: sama7g5ek: specify proper regulator output ranges

[ Upstream commit 7f41d52ced9e1b7ed4ff8e1ae9cacbf46b64e6db ]

Min and max output ranges of regulators need to satisfy board
requirements not PMIC requirements. Thus adjust device tree to
cope with this.

Fixes: 7540629e2fc7 ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220826083927.3107272-7-claudiu.beznea@microchip.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: at91: fix low limit for CPU regulator

[ Upstream commit 279d626d737486363233b9b99c30b5696c389b41 ]

Fix low limit for CPU regulator. Otherwise setting voltages lower than
1.125V will not be allowed (CPUFreq will not be allowed to set proper
voltages on proper frequencies).

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220113144900.906370-7-claudiu.beznea@microchip.com
Stable-dep-of: 7f41d52ced9e ("ARM: dts: at91: sama7g5ek: specify proper regulator output ranges")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx6qdl-kontron-samx6i: fix spi-flash compatible

[ Upstream commit af7d78c957017f8b3a0986769f6f18e57f9362ea ]

Drop the "winbond,w25q16dw" compatible since it causes to set the
MODALIAS to w25q16dw which is not specified within spi-nor id table.
Fix this by use the common "jedec,spi-nor" compatible.

Fixes: 2125212785c9 ("ARM: dts: imx6qdl-kontron-samx6i: add Kontron SMARC SoM Support")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx: align SPI NOR node name with dtschema

[ Upstream commit ba9fe460dc2cfe90dc115b22af14dd3f13cffa0f ]

The node names should be generic and SPI NOR dtschema expects "flash".

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Stable-dep-of: af7d78c95701 ("ARM: dts: imx6qdl-kontron-samx6i: fix spi-flash compatible")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: resource: skip IRQ override on AMD Zen platforms

commit 9946e39fe8d0a5da9eb947d8e40a7ef204ba016e upstream.

IRQ override isn't needed on modern AMD Zen systems.
There's an active low keyboard IRQ on AMD Ryzen 6000 and it will stay
this way on newer platforms. This IRQ override breaks keyboards for
almost all Ryzen 6000 laptops currently on the market.

Skip this IRQ override for all AMD Zen platforms because this IRQ
override is supposed to be a workaround for buggy ACPI DSDT and we can't
have a long list of all future AMD CPUs/Laptops in the kernel code.
If a device with buggy ACPI DSDT shows up, a separated list containing
just them should be created.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216118
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: XiaoYan Li <lxy.lixiaoyan@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFS: Fix WARN_ON due to unionization of nfs_inode.nrequests

commit 0ebeebcf59601bcfa0284f4bb7abdec051eb856d upstream.

Fixes the following WARN_ON
WARNING: CPU: 2 PID: 18678 at fs/nfs/inode.c:123 nfs_clear_inode+0x3b/0x50 [nfs]
...
Call Trace:
  nfs4_evict_inode+0x57/0x70 [nfsv4]
  evict+0xd1/0x180
  dispose_list+0x48/0x60
  evict_inodes+0x156/0x190
  generic_shutdown_super+0x37/0x110
  nfs_kill_super+0x1d/0x40 [nfs]
  deactivate_locked_super+0x36/0xa0

Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.15.68

Link: https://lore.kernel.org/r/20220913140357.323297659@linuxfoundation.org
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>=20
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: at91: ddr: remove CONFIG_SOC_SAMA7 dependency

[ Upstream commit dc3005703f8cd893d325081c20b400e08377d9bb ]

Remove CONFIG_SOC_SAMA7 dependency to avoid having #ifdef preprocessor
directives in driver code (arch/arm/mach-at91/pm.c). This prepares the
code for next commits.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220113144900.906370-2-claudiu.beznea@microchip.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf machine: Use path__join() to compose a path instead of snprintf(dir, '/', filename)

commit 9d5f0c36438eeae7566ca383b2b673179e3cc613 upstream.

Its more intention revealing, and if we're interested in the odd cases
where this may end up truncating we can do debug checks at one
centralized place.

Motivation, of all the container builds, fedora rawhide started
complaining of:

  util/machine.c: In function ‘machine__create_modules’:
  util/machine.c:1419:50: error: ‘%s’ directive output may be truncated writing up to 255 bytes into a region of size between 0 and 4095 [-Werror=format-truncation=]
   1419 |                 snprintf(path, sizeof(path), "%s/%s", dir_name, dent->d_name);
        |                                                  ^~
  In file included from /usr/include/stdio.h:894,
                   from util/branch.h:9,
                   from util/callchain.h:8,
                   from util/machine.c:7:
  In function ‘snprintf’,
      inlined from ‘maps__set_modules_path_dir’ at util/machine.c:1419:3,
      inlined from ‘machine__set_modules_path’ at util/machine.c:1473:9,
      inlined from ‘machine__create_modules’ at util/machine.c:1519:7:
  /usr/include/bits/stdio2.h:71:10: note: ‘__builtin___snprintf_chk’ output between 2 and 4352 bytes into a destination of size 4096

There are other places where we should use path__join(), but lets get rid of
this one first.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/YebZKjwgfdOz0lAs@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/bridge: display-connector: implement bus fmts callbacks

commit 7cd70656d1285b79c001f041a017fcfee4292ff9 upstream.

Since this bridge is tied to the connector, it acts like a passthrough,
so concerning the output & input bus formats, either pass the bus formats from the
previous bridge or return fallback data like done in the bridge function:
drm_atomic_bridge_chain_select_bus_fmts() & select_bus_fmt_recursive.

This permits avoiding skipping the negociation if the remaining bridge chain has
all the bits in place.

Without this bus fmt negociation breaks on drm/meson HDMI pipeline when attaching
dw-hdmi with DRM_BRIDGE_ATTACH_NO_CONNECTOR, because the last bridge of the
display-connector doesn't implement buf fmt callbacks and MEDIA_BUS_FMT_FIXED
is used leading to select an unsupported default bus format from dw-hdmi.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020123947.2585572-2-narmstrong@baylibre.com
Cc: Stefan Agner <stefan@agner.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: errata: add detection for AMEVCNTR01 incrementing incorrectly

commit e89d120c4b720e232cc6a94f0fcbd59c15d41489 upstream.

The AMU counter AMEVCNTR01 (constant counter) should increment at the same
rate as the system counter. On affected Cortex-A510 cores, AMEVCNTR01
increments incorrectly giving a significantly higher output value. This
results in inaccurate task scheduler utilization tracking and incorrect
feedback on CPU frequency.

Work around this problem by returning 0 when reading the affected counter
in key locations that results in disabling all users of this counter from
using it either for frequency invariance or as FFH reference counter. This
effect is the same to firmware disabling affected counters.

Details on how the two features are affected by this erratum:

 - AMU counters will not be used for frequency invariance for affected
   CPUs and CPUs in the same cpufreq policy. AMUs can still be used for
   frequency invariance for unaffected CPUs in the system. Although
   unlikely, if no alternative method can be found to support frequency
   invariance for affected CPUs (cpufreq based or solution based on
   platform counters) frequency invariance will be disabled. Please check
   the chapter on frequency invariance at
   Documentation/scheduler/sched-capacity.rst for details of its effect.

 - Given that FFH can be used to fetch either the core or constant counter
   values, restrictions are lifted regarding any of these counters
   returning a valid (!0) value. Therefore FFH is considered supported
   if there is a least one CPU that support AMUs, independent of any
   counters being disabled or affected by this erratum. Clarifying
   comments are now added to the cpc_ffh_supported(), cpu_read_constcnt()
   and cpu_read_corecnt() functions.

The above is achieved through adding a new erratum: ARM64_ERRATUM_2457168.

Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20220819103050.24211-1-ionela.voinescu@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/vt-d: Correctly calculate sagaw value of IOMMU

commit 53fc7ad6edf210b497230ce74b61b322a202470c upstream.

The Intel IOMMU driver possibly selects between the first-level and the
second-level translation tables for DMA address translation. However,
the levels of page-table walks for the 4KB base page size are calculated
from the SAGAW field of the capability register, which is only valid for
the second-level page table. This causes the IOMMU driver to stop working
if the hardware (or the emulated IOMMU) advertises only first-level
translation capability and reports the SAGAW field as 0.

This solves the above problem by considering both the first level and the
second level when calculating the supported page table levels.

Fixes: b802d070a52a1 ("iommu/vt-d: Use iova over first level")
Cc: stable@vger.kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20220817023558.3253263-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64/bti: Disable in kernel BTI when cross section thunks are broken

commit c0a454b9044fdc99486853aa424e5b3be2107078 upstream.

GCC does not insert a `bti c` instruction at the beginning of a function
when it believes that all callers reach the function through a direct
branch[1]. Unfortunately the logic it uses to determine this is not
sufficiently robust, for example not taking account of functions being
placed in different sections which may be loaded separately, so we may
still see thunks being generated to these functions. If that happens,
the first instruction in the callee function will result in a Branch
Target Exception due to the missing landing pad.

While this has currently only been observed in the case of modules
having their main code loaded sufficiently far from their init section
to require thunks it could potentially happen for other cases so the
safest thing is to disable BTI for the kernel when building with an
affected toolchain.

[1]: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=106671

Reported-by: D Scott Phillips <scott@os.amperecomputing.com>
[Bits of the commit message are lifted from his report & workaround]
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220905142255.591990-1-broonie@kernel.org
Cc: <stable@vger.kernel.org> # v5.10+
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "arm64: kasan: Revert "arm64: mte: reset the page tag in page->flags""

This reverts commit add4bc9281e8704e5ab15616b429576c84f453a2.

On Mon, Sep 12, 2022 at 10:52:45AM +0100, Catalin Marinas wrote:
>I missed this (holidays) and it looks like it's in stable already. On
>its own it will likely break kasan_hw if used together with user-space
>MTE as this change relies on two previous commits:
>
>70c248aca9e7 ("mm: kasan: Skip unpoisoning of user pages")
>6d05141a3930 ("mm: kasan: Skip page unpoisoning only if __GFP_SKIP_KASAN_UNPOISON")
>
>The reason I did not cc stable is that there are other dependencies in
>this area. The potential issues without the above commits were rather
>theoretical, so take these patches rather as clean-ups/refactoring than
>fixes.

Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (mr75203) enable polling for all VM channels

[ Upstream commit e43212e0f55dc2d6b15d6c174cc0a64b25fab5e7 ]

Configure ip-polling register to enable polling for all voltage monitor
channels.
This enables reading the voltage values for all inputs other than just
input 0.

Fixes: 9d823351a337 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller")
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220908152449.35457-7-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (mr75203) fix multi-channel voltage reading

[ Upstream commit 91a9e063cdcfca8fe642b078d6fae4ce49187975 ]

Fix voltage allocation and reading to support all channels in all VMs.
Prior to this change allocation and reading were done only for the first
channel in each VM.
This change counts the total number of channels for allocation, and takes
into account the channel offset when reading the sample data register.

Fixes: 9d823351a337 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller")
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220908152449.35457-6-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (mr75203) fix voltage equation for negative source input

[ Upstream commit 227a3a2fc31d8e4bb9c88d4804e19530af245b1b ]

According to Moortec Embedded Voltage Monitor (MEVM) series 3 data
sheet, the minimum input signal is -100mv and maximum input signal
is +1000mv.

The equation used to convert the digital word to voltage uses mixed
types (*val signed and n unsigned), and on 64 bit machines also has
different size, since sizeof(u32) = 4 and sizeof(long) = 8.

So when measuring a negative input, n will be small enough, such that
PVT_N_CONST * n < PVT_R_CONST, and the result of
(PVT_N_CONST * n - PVT_R_CONST) will overflow to a very big positive
32 bit number. Then when storing the result in *val it will be the same
value just in 64 bit (instead of it representing a negative number which
will what happen when sizeof(long) = 4).

When -1023 <= (PVT_N_CONST * n - PVT_R_CONST) <= -1
dividing the number by 1024 should result of in 0, but because ">> 10"
is used, and the sign bit is used to fill the vacated bit positions, it
results in -1 (0xf...fffff) which is wrong.

This change fixes the sign problem and supports negative values by
casting n to long and replacing the shift right with div operation.

Fixes: 9d823351a337 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller")
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220908152449.35457-5-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (mr75203) update pvt->v_num and vm_num to the actual number of used sensors

[ Upstream commit bb9195bd6664d94d71647631593e09f705ff5edd ]

This issue is relevant when "intel,vm-map" is set in device-tree, and
defines a lower number of VMs than actually supported.

This change is needed for all places that use pvt->v_num or vm_num
later on in the code.

Fixes: 9d823351a337 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller")
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220908152449.35457-4-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (mr75203) fix VM sensor allocation when "intel,vm-map" not defined

[ Upstream commit 81114fc3d27bf5b06b2137d2fd2b63da656a8b90 ]

Bug - in case "intel,vm-map" is missing in device-tree ,'num' is set
to 0, and no voltage channel infos are allocated.

The reason num is set to 0 when "intel,vm-map" is missing is to set the
entire pvt->vm_idx[] with incremental channel numbers, but it didn't
take into consideration that same num is used later in devm_kcalloc().

If "intel,vm-map" does exist there is no need to set the unspecified
channels with incremental numbers, because the unspecified channels
can't be accessed in pvt_read_in() which is the only other place besides
the probe functions that uses pvt->vm_idx[].

This change fixes the bug by moving the incremental channel numbers
setting to be done only if "intel,vm-map" property is defined (starting
loop from 0), and removing 'num = 0'.

Fixes: 9d823351a337 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller")
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220908152449.35457-3-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/boot: fix absolute zero lowcore corruption on boot

[ Upstream commit 12dd19c159659ec9050f45dc8a2ff3c3917f4be3 ]

Crash dump always starts on CPU0. In case CPU0 is offline the
prefix page is not installed and the absolute zero lowcore is
used. However, struct lowcore::mcesad is never assigned and
stays zero. That leads to __machine_kdump() -> save_vx_regs()
call silently stores vector registers to the absolute lowcore
at 0x11b0 offset.

Fixes: a62bc0739253 ("s390/kdump: add support for vector extension")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/amd: use full 64-bit value in build_completion_wait()

[ Upstream commit 94a568ce32038d8ff9257004bb4632e60eb43a49 ]

We started using a 64 bit completion value.  Unfortunately, we only
stored the low 32-bits, so a very large completion value would never
be matched in iommu_completion_wait().

Fixes: c69d89aff393 ("iommu/amd: Use 4K page for completion wait write-back semaphore")
Signed-off-by: John Sperbeck <jsperbeck@google.com>
Link: https://lore.kernel.org/r/20220801192229.3358786-1-jsperbeck@google.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

swiotlb: avoid potential left shift overflow

[ Upstream commit 3f0461613ebcdc8c4073e235053d06d5aa58750f ]

The second operand passed to slot_addr() is declared as int or unsigned int
in all call sites. The left-shift to get the offset of a slot can overflow
if swiotlb size is larger than 4G.

Convert the macro to an inline function and declare the second argument as
phys_addr_t to avoid the potential overflow.

Fixes: 26a7e094783d ("swiotlb: refactor swiotlb_tbl_map_single")
Signed-off-by: Chao Gao <chao.gao@intel.com>
Reviewed-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: Fix ADQ rate limiting for PF

[ Upstream commit 45bb006d3c924b1201ed43c87a96b437662dcaa8 ]

Fix HW rate limiting for ADQ.
Fallback to kernel queue selection for ADQ, as it is network stack
that decides which queue to use for transmit with ADQ configured.
Reset PF after creation of VMDq2 VSIs required for ADQ, as to
reprogram TX queue contexts in i40e_configure_tx_ring.
Without this patch PF would limit TX rate only according to TC0.

Fixes: a9ce82f744dc ("i40e: Enable 'channel' mode in mqprio for TC configs")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: Refactor tc mqprio checks

[ Upstream commit 2313e69c84c024a85d017a60ae925085de47530a ]

Refactor bitwise checks for whether TC MQPRIO is enabled
into one single method for improved readability.

Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: 45bb006d3c92 ("i40e: Fix ADQ rate limiting for PF")
Signed-off-by: Sasha Levin <sashal@kernel.org>

kbuild: disable header exports for UML in a straightforward way

[ Upstream commit 1b620d539ccc18a1aca1613d9ff078115a7891a1 ]

Previously 'make ARCH=um headers' stopped because of missing
arch/um/include/uapi/asm/Kbuild.

The error is not shown since commit ed102bf2afed ("um: Fix W=1
missing-include-dirs warnings") added arch/um/include/uapi/asm/Kbuild.

Hard-code the unsupported architecture, so it works like before.

Fixes: ed102bf2afed ("um: Fix W=1 missing-include-dirs warnings")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: loongson32: ls1c: Fix hang during startup

[ Upstream commit 35508d2424097f9b6a1a17aac94f702767035616 ]

The RTCCTRL reg of LS1C is obselete.
Writing this reg will cause system hang.

Fixes: 60219c563c9b6 ("MIPS: Add RTC support for Loongson1C board")
Signed-off-by: Yang Ling <gnaygnil@gmail.com>
Tested-by: Keguang Zhang <keguang.zhang@gmail.com>
Acked-by: Keguang Zhang <keguang.zhang@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: mchp-spdiftx: Fix clang -Wbitfield-constant-conversion

commit 5c5c2baad2b55cc0a4b190266889959642298f79 upstream.

A recent change in clang strengthened its -Wbitfield-constant-conversion
to warn when 1 is assigned to a 1-bit signed integer bitfield, as it can
only be 0 or -1, not 1:

  sound/soc/atmel/mchp-spdiftx.c:505:20: error: implicit truncation from 'int' to bit-field changes value from 1 to -1 [-Werror,-Wbitfield-constant-conversion]
          dev->gclk_enabled = 1;
                            ^ ~
  1 error generated.

The actual value of the field is never checked, just that it is not
zero, so there is not a real bug here. However, it is simple enough to
silence the warning by making the bitfield unsigned, which matches the
mchp-spdifrx driver.

Fixes: 06ca24e98e6b ("ASoC: mchp-spdiftx: add driver for S/PDIF TX Controller")
Link: https://github.com/ClangBuiltLinux/linux/issues/1686
Link: https://github.com/llvm/llvm-project/commit/82afc9b169a67e8b8a1862fb9c41a2cd974d6691
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20220810010809.2024482-1-nathan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: mchp-spdiftx: remove references to mchp_i2s_caps

commit 403fcb5118a0f4091001a537e76923031fb45eaf upstream.

Remove references to struct mchp_i2s_caps as they are not used.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220727090814.2446111-3-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (tps23861) fix byte order in resistance register

commit 1f05f65bddd6958d25b133f886da49c1d4bff3fa upstream.

The tps23861 registers are little-endian, and regmap_read_bulk() does
not do byte order conversion. On BE machines, the bytes were swapped,
and the interpretation of the resistance value was incorrect.

To make it work on both big and little-endian machines, use
le16_to_cpu() to convert the resitance register to host byte order.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Fixes: fff7b8ab22554 ("hwmon: add Texas Instruments TPS23861 driver")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220905142806.110598-1-mr.nuke.me@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf script: Fix Cannot print 'iregs' field for hybrid systems

[ Upstream commit 82b2425fad2dd47204b3da589b679220f8aacc0e ]

Commit b91e5492f9d7ca89 ("perf record: Add a dummy event on hybrid
systems to collect metadata records") adds a dummy event on hybrid
systems to fix the symbol "unknown" issue when the workload is created
in a P-core but runs on an E-core. The added dummy event will cause
"perf script -F iregs" to fail. Dummy events do not have "iregs"
attribute set, so when we do evsel__check_attr, the "iregs" attribute
check will fail, so the issue happened.

The following commit [1] has fixed a similar issue by skipping the attr
check for the dummy event because it does not have any samples anyway. It
works okay for the normal mode, but the issue still happened when running
the test in the pipe mode. In the pipe mode, it calls process_attr() which
still checks the attr for the dummy event. This commit fixed the issue by
skipping the attr check for the dummy event in the API evsel__check_attr,
Otherwise, we have to patch everywhere when evsel__check_attr() is called.

Before:

  #./perf record -o - --intr-regs=di,r8,dx,cx -e br_inst_retired.near_call:p -c 1000 --per-thread true 2>/dev/null|./perf script -F iregs |head -5
  Samples for 'dummy:HG' event do not have IREGS attribute set. Cannot print 'iregs' field.
  0x120 [0x90]: failed to process type: 64
  #

After:

  # ./perf record -o - --intr-regs=di,r8,dx,cx -e br_inst_retired.near_call:p -c 1000 --per-thread true 2>/dev/null|./perf script -F iregs |head -5
  ABI:2    CX:0x55b8efa87000    DX:0x55b8efa7e000    DI:0xffffba5e625efbb0    R8:0xffff90e51f8ae100
  ABI:2    CX:0x7f1dae1e4000    DX:0xd0    DI:0xffff90e18c675ac0    R8:0x71
  ABI:2    CX:0xcc0    DX:0x1    DI:0xffff90e199880240    R8:0x0
  ABI:2    CX:0xffff90e180dd7500    DX:0xffff90e180dd7500    DI:0xffff90e180043500    R8:0x1
  ABI:2    CX:0x50    DX:0xffff90e18c583bd0    DI:0xffff90e1998803c0    R8:0x58
  #

[1]https://lore.kernel.org/lkml/20220831124041.219925-1-jolsa@kernel.org/

Fixes: b91e5492f9d7ca89 ("perf record: Add a dummy event on hybrid systems to collect metadata records")
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220908070030.3455164-1-zhengjun.xing@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sch_sfb: Also store skb len before calling child enqueue

[ Upstream commit 2f09707d0c972120bf794cfe0f0c67e2c2ddb252 ]

Cong Wang noticed that the previous fix for sch_sfb accessing the queued
skb after enqueueing it to a child qdisc was incomplete: the SFB enqueue
function was also calling qdisc_qstats_backlog_inc() after enqueue, which
reads the pkt len from the skb cb field. Fix this by also storing the skb
len, and using the stored value to increment the backlog after enqueueing.

Fixes: 9efd23297cca ("sch_sfb: Don't assume the skb is still around after enqueueing to child")
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Acked-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/r/20220905192137.965549-1-toke@toke.dk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/irdma: Report RNR NAK generation in device caps

[ Upstream commit a261786fdc0a5bed2e5f994dcc0ffeeeb0d662c7 ]

Report RNR NAK generation when device capabilities are queried

Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Sindhu-Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20220906223244.1119-6-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/irdma: Return correct WC error for bind operation failure

[ Upstream commit dcb23bbb1de7e009875fdfac2b8a9808a9319cc6 ]

When a QP and a MR on a local host are in different PDs, the HW generates
an asynchronous event (AE). The same AE is generated when a QP and a MW
are in different PDs during a bind operation. Return the more appropriate
IBV_WC_MW_BIND_ERR for the latter case by checking the OP type from the
CQE in error.

Fixes: 551c46edc769 ("RDMA/irdma: Add user/kernel shared libraries")
Signed-off-by: Sindhu-Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20220906223244.1119-4-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/irdma: Report the correct max cqes from query device

[ Upstream commit 12faad5e5cf2372af2d51f348b697b5edf838daf ]

Report the correct max cqes available to an application taking
into account a reserved entry to detect overflow.

Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Sindhu-Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20220906223244.1119-2-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvmet: fix mar and mor off-by-one errors

[ Upstream commit b7e97872a65e1d57b4451769610554c131f37a0a ]

Maximum Active Resources (MAR) and Maximum Open Resources (MOR) are 0's
based vales where a value of 0xffffffff indicates that there is no limit.

Decrement the values that are returned by bdev_max_open_zones and
bdev_max_active_zones as the block layer helpers are not 0's based.
A 0 returned by the block layer helpers indicates no limit, thus convert
it to 0xffffffff (U32_MAX).

Fixes: aaf2e048af27 ("nvmet: add ZBD over ZNS backend support")
Suggested-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: fix early ETIMEDOUT after spurious non-SACK RTO

[ Upstream commit 686dc2db2a0fdc1d34b424ec2c0a735becd8d62b ]

Fix a bug reported and analyzed by Nagaraj Arankal, where the handling
of a spurious non-SACK RTO could cause a connection to fail to clear
retrans_stamp, causing a later RTO to very prematurely time out the
connection with ETIMEDOUT.

Here is the buggy scenario, expanding upon Nagaraj Arankal's excellent
report:

(*1) Send one data packet on a non-SACK connection

(*2) Because no ACK packet is received, the packet is retransmitted
     and we enter CA_Loss; but this retransmission is spurious.

(*3) The ACK for the original data is received. The transmitted packet
     is acknowledged.  The TCP timestamp is before the retrans_stamp,
     so tcp_may_undo() returns true, and tcp_try_undo_loss() returns
     true without changing state to Open (because tcp_is_sack() is
     false), and tcp_process_loss() returns without calling
     tcp_try_undo_recovery().  Normally after undoing a CA_Loss
     episode, tcp_fastretrans_alert() would see that the connection
     has returned to CA_Open and fall through and call
     tcp_try_to_open(), which would set retrans_stamp to 0.  However,
     for non-SACK connections we hold the connection in CA_Loss, so do
     not fall through to call tcp_try_to_open() and do not set
     retrans_stamp to 0. So retrans_stamp is (erroneously) still
     non-zero.

     At this point the first "retransmission event" has passed and
     been recovered from. Any future retransmission is a completely
     new "event". However, retrans_stamp is erroneously still
     set. (And we are still in CA_Loss, which is correct.)

(*4) After 16 minutes (to correspond with tcp_retries2=15), a new data
     packet is sent. Note: No data is transmitted between (*3) and
     (*4) and we disabled keep alives.

     The socket's timeout SHOULD be calculated from this point in
     time, but instead it's calculated from the prior "event" 16
     minutes ago (step (*2)).

(*5) Because no ACK packet is received, the packet is retransmitted.

(*6) At the time of the 2nd retransmission, the socket returns
     ETIMEDOUT, prematurely, because retrans_stamp is (erroneously)
     too far in the past (set at the time of (*2)).

This commit fixes this bug by ensuring that we reuse in
tcp_try_undo_loss() the same careful logic for non-SACK connections
that we have in tcp_try_undo_recovery(). To avoid duplicating logic,
we factor out that logic into a new
tcp_is_non_sack_preventing_reopen() helper and call that helper from
both undo functions.

Fixes: da34ac7626b5 ("tcp: only undo on partial ACKs in CA_Loss")
Reported-by: Nagaraj Arankal <nagaraj.p.arankal@hpe.com>
Link: https://lore.kernel.org/all/SJ0PR84MB1847BE6C24D274C46A1B9B0EB27A9@SJ0PR84MB1847.NAMPRD84.PROD.OUTLOOK.COM/
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220903121023.866900-1-ncardwell.kernel@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-tcp: fix regression that causes sporadic requests to time out

[ Upstream commit 3770a42bb8ceb856877699257a43c0585a5d2996 ]

When we queue requests, we strive to batch as much as possible and also
signal the network stack that more data is about to be sent over a socket
with MSG_SENDPAGE_NOTLAST. This flag looks at the pending requests queued
as well as queue->more_requests that is derived from the block layer
last-in-batch indication.

We set more_request=true when we flush the request directly from
.queue_rq submission context (in nvme_tcp_send_all), however this is
wrongly assuming that no other requests may be queued during the
execution of nvme_tcp_send_all.

Due to this, a race condition may happen where:

 1. request X is queued as !last-in-batch
 2. request X submission context calls nvme_tcp_send_all directly
 3. nvme_tcp_send_all is preempted and schedules to a different cpu
 4. request Y is queued as last-in-batch
 5. nvme_tcp_send_all context sends request X+Y, however signals for
    both MSG_SENDPAGE_NOTLAST because queue->more_requests=true.

==> none of the requests is pushed down to the wire as the network
stack is waiting for more data, both requests timeout.

To fix this, we eliminate queue->more_requests and only rely on
the queue req_list and send_list to be not-empty.

Fixes: 122e5b9f3d37 ("nvme-tcp: optimize network stack with setting msg flags according to batch size")
Reported-by: Jonathan Nicklin <jnicklin@blockbridge.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Jonathan Nicklin <jnicklin@blockbridge.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-tcp: fix UAF when detecting digest errors

[ Upstream commit 160f3549a907a50e51a8518678ba2dcf2541abea ]

We should also bail from the io_work loop when we set rd_enabled to true,
so we don't attempt to read data from the socket when the TCP stream is
already out-of-sync or corrupted.

Fixes: 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver")
Reported-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

erofs: fix pcluster use-after-free on UP platforms

[ Upstream commit 2f44013e39984c127c6efedf70e6b5f4e9dcf315 ]

During stress testing with CONFIG_SMP disabled, KASAN reports as below:

==================================================================
BUG: KASAN: use-after-free in __mutex_lock+0xe5/0xc30
Read of size 8 at addr ffff8881094223f8 by task stress/7789

CPU: 0 PID: 7789 Comm: stress Not tainted 6.0.0-rc1-00002-g0d53d2e882f9 #3
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Call Trace:
 <TASK>
..
 __mutex_lock+0xe5/0xc30
..
 z_erofs_do_read_page+0x8ce/0x1560
..
 z_erofs_readahead+0x31c/0x580
..
Freed by task 7787
 kasan_save_stack+0x1e/0x40
 kasan_set_track+0x20/0x30
 kasan_set_free_info+0x20/0x40
 __kasan_slab_free+0x10c/0x190
 kmem_cache_free+0xed/0x380
 rcu_core+0x3d5/0xc90
 __do_softirq+0x12d/0x389

Last potentially related work creation:
 kasan_save_stack+0x1e/0x40
 __kasan_record_aux_stack+0x97/0xb0
 call_rcu+0x3d/0x3f0
 erofs_shrink_workstation+0x11f/0x210
 erofs_shrink_scan+0xdc/0x170
 shrink_slab.constprop.0+0x296/0x530
 drop_slab+0x1c/0x70
 drop_caches_sysctl_handler+0x70/0x80
 proc_sys_call_handler+0x20a/0x2f0
 vfs_write+0x555/0x6c0
 ksys_write+0xbe/0x160
 do_syscall_64+0x3b/0x90

The root cause is that erofs_workgroup_unfreeze() doesn't reset to
orig_val thus it causes a race that the pcluster reuses unexpectedly
before freeing.

Since UP platforms are quite rare now, such path becomes unnecessary.
Let's drop such specific-designed path directly instead.

Fixes: 73f5c66df3e2 ("staging: erofs: fix `erofs_workgroup_{try_to_freeze, unfreeze}'")
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20220902045710.109530-1-hsiangkao@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/mlx5: Set local port to one when accessing counters

[ Upstream commit 74b30b3ad5cec95d2647e796d10137438a098bc1 ]

When accessing Ports Performance Counters Register (PPCNT),
local port must be one if it is Function-Per-Port HCA that
HCA_CAP.num_ports is 1.

The offending patch can change the local port to other values
when accessing PPCNT after enabling switchdev mode. The following
syndrome will be printed:

 # cat /sys/class/infiniband/rdmap4s0f0/ports/2/counters/*
 # dmesg
 mlx5_core 0000:04:00.0: mlx5_cmd_check:756:(pid 12450): ACCESS_REG(0x805) op_mod(0x1) failed, status bad parameter(0x3), syndrome (0x1e5585)

Fix it by setting local port to one for Function-Per-Port HCA.

Fixes: 210b1f78076f ("IB/mlx5: When not in dual port RoCE mode, use provided port as native")
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Chris Mi <cmi@nvidia.com>
Link: https://lore.kernel.org/r/6c5086c295c76211169e58dbd610fb0402360bab.1661763459.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/core: Fix a nested dead lock as part of ODP flow

[ Upstream commit 85eaeb5058f0f04dffb124c97c86b4f18db0b833 ]

Fix a nested dead lock as part of ODP flow by using mmput_async().

From the below call trace [1] can see that calling mmput() once we have
the umem_odp->umem_mutex locked as required by
ib_umem_odp_map_dma_and_lock() might trigger in the same task the
exit_mmap()->__mmu_notifier_release()->mlx5_ib_invalidate_range() which
may dead lock when trying to lock the same mutex.

Moving to use mmput_async() will solve the problem as the above
exit_mmap() flow will be called in other task and will be executed once
the lock will be available.

[1]
[64843.077665] task:kworker/u133:2  state:D stack:    0 pid:80906 ppid:
2 flags:0x00004000
[64843.077672] Workqueue: mlx5_ib_page_fault mlx5_ib_eqe_pf_action [mlx5_ib]
[64843.077719] Call Trace:
[64843.077722]  <TASK>
[64843.077724]  __schedule+0x23d/0x590
[64843.077729]  schedule+0x4e/0xb0
[64843.077735]  schedule_preempt_disabled+0xe/0x10
[64843.077740]  __mutex_lock.constprop.0+0x263/0x490
[64843.077747]  __mutex_lock_slowpath+0x13/0x20
[64843.077752]  mutex_lock+0x34/0x40
[64843.077758]  mlx5_ib_invalidate_range+0x48/0x270 [mlx5_ib]
[64843.077808]  __mmu_notifier_release+0x1a4/0x200
[64843.077816]  exit_mmap+0x1bc/0x200
[64843.077822]  ? walk_page_range+0x9c/0x120
[64843.077828]  ? __cond_resched+0x1a/0x50
[64843.077833]  ? mutex_lock+0x13/0x40
[64843.077839]  ? uprobe_clear_state+0xac/0x120
[64843.077860]  mmput+0x5f/0x140
[64843.077867]  ib_umem_odp_map_dma_and_lock+0x21b/0x580 [ib_core]
[64843.077931]  pagefault_real_mr+0x9a/0x140 [mlx5_ib]
[64843.077962]  pagefault_mr+0xb4/0x550 [mlx5_ib]
[64843.077992]  pagefault_single_data_segment.constprop.0+0x2ac/0x560
[mlx5_ib]
[64843.078022]  mlx5_ib_eqe_pf_action+0x528/0x780 [mlx5_ib]
[64843.078051]  process_one_work+0x22b/0x3d0
[64843.078059]  worker_thread+0x53/0x410
[64843.078065]  ? process_one_work+0x3d0/0x3d0
[64843.078073]  kthread+0x12a/0x150
[64843.078079]  ? set_kthread_struct+0x50/0x50
[64843.078085]  ret_from_fork+0x22/0x30
[64843.078093]  </TASK>

Fixes: 36f30e486dce ("IB/core: Improve ODP to use hmm_range_fault()")
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/74d93541ea533ef7daec6f126deb1072500aeb16.1661251841.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipv6: sr: fix out-of-bounds read when setting HMAC data.

[ Upstream commit 84a53580c5d2138c7361c7c3eea5b31827e63b35 ]

The SRv6 layer allows defining HMAC data that can later be used to sign IPv6
Segment Routing Headers. This configuration is realised via netlink through
four attributes: SEG6_ATTR_HMACKEYID, SEG6_ATTR_SECRET, SEG6_ATTR_SECRETLEN and
SEG6_ATTR_ALGID. Because the SECRETLEN attribute is decoupled from the actual
length of the SECRET attribute, it is possible to provide invalid combinations
(e.g., secret = "", secretlen = 64). This case is not checked in the code and
with an appropriately crafted netlink message, an out-of-bounds read of up
to 64 bytes (max secret length) can occur past the skb end pointer and into
skb_shared_info:

Breakpoint 1, seg6_genl_sethmac (skb=<optimized out>, info=<optimized out>) at net/ipv6/seg6.c:208
208 memcpy(hinfo->secret, secret, slen);
(gdb) bt
 #0  seg6_genl_sethmac (skb=<optimized out>, info=<optimized out>) at net/ipv6/seg6.c:208
 #1  0xffffffff81e012e9 in genl_family_rcv_msg_doit (skb=skb@entry=0xffff88800b1f9f00, nlh=nlh@entry=0xffff88800b1b7600,
    extack=extack@entry=0xffffc90000ba7af0, ops=ops@entry=0xffffc90000ba7a80, hdrlen=4, net=0xffffffff84237580 <init_net>, family=<optimized out>,
    family=<optimized out>) at net/netlink/genetlink.c:731
 #2  0xffffffff81e01435 in genl_family_rcv_msg (extack=0xffffc90000ba7af0, nlh=0xffff88800b1b7600, skb=0xffff88800b1f9f00,
    family=0xffffffff82fef6c0 <seg6_genl_family>) at net/netlink/genetlink.c:775
 #3  genl_rcv_msg (skb=0xffff88800b1f9f00, nlh=0xffff88800b1b7600, extack=0xffffc90000ba7af0) at net/netlink/genetlink.c:792
 #4  0xffffffff81dfffc3 in netlink_rcv_skb (skb=skb@entry=0xffff88800b1f9f00, cb=cb@entry=0xffffffff81e01350 <genl_rcv_msg>)
    at net/netlink/af_netlink.c:2501
 #5  0xffffffff81e00919 in genl_rcv (skb=0xffff88800b1f9f00) at net/netlink/genetlink.c:803
 #6  0xffffffff81dff6ae in netlink_unicast_kernel (ssk=0xffff888010eec800, skb=0xffff88800b1f9f00, sk=0xffff888004aed000)
    at net/netlink/af_netlink.c:1319
 #7  netlink_unicast (ssk=ssk@entry=0xffff888010eec800, skb=skb@entry=0xffff88800b1f9f00, portid=portid@entry=0, nonblock=<optimized out>)
    at net/netlink/af_netlink.c:1345
 #8  0xffffffff81dff9a4 in netlink_sendmsg (sock=<optimized out>, msg=0xffffc90000ba7e48, len=<optimized out>) at net/netlink/af_netlink.c:1921
...
(gdb) p/x ((struct sk_buff *)0xffff88800b1f9f00)->head + ((struct sk_buff *)0xffff88800b1f9f00)->end
$1 = 0xffff88800b1b76c0
(gdb) p/x secret
$2 = 0xffff88800b1b76c0
(gdb) p slen
$3 = 64 '@'

The OOB data can then be read back from userspace by dumping HMAC state. This
commit fixes this by ensuring SECRETLEN cannot exceed the actual length of
SECRET.

Reported-by: Lucas Leong <wmliang.tw@gmail.com>
Tested: verified that EINVAL is correctly returned when secretlen > len(secret)
Fixes: 4f4853dc1c9c1 ("ipv6: sr: implement API to control SR HMAC structure")
Signed-off-by: David Lebrun <dlebrun@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/siw: Pass a pointer to virt_to_page()

[ Upstream commit 0d1b756acf60da5004c1e20ca4462f0c257bf6e1 ]

Functions that work on a pointer to virtual memory such as
virt_to_pfn() and users of that function such as
virt_to_page() are supposed to pass a pointer to virtual
memory, ideally a (void *) or other pointer. However since
many architectures implement virt_to_pfn() as a macro,
this function becomes polymorphic and accepts both a
(unsigned long) and a (void *).

If we instead implement a proper virt_to_pfn(void *addr)
function the following happens (occurred on arch/arm):

drivers/infiniband/sw/siw/siw_qp_tx.c:32:23: warning: incompatible
  integer to pointer conversion passing 'dma_addr_t' (aka 'unsigned int')
  to parameter of type 'const void *' [-Wint-conversion]
drivers/infiniband/sw/siw/siw_qp_tx.c:32:37: warning: passing argument
  1 of 'virt_to_pfn' makes pointer from integer without a cast
  [-Wint-conversion]
drivers/infiniband/sw/siw/siw_qp_tx.c:538:36: warning: incompatible
  integer to pointer conversion passing 'unsigned long long'
  to parameter of type 'const void *' [-Wint-conversion]

Fix this with an explicit cast. In one case where the SIW
SGE uses an unaligned u64 we need a double cast modifying the
virtual address (va) to a platform-specific uintptr_t before
casting to a (void *).

Fixes: b9be6f18cf9e ("rdma/siw: transmit path")
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220902215918.603761-1-linus.walleij@linaro.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xen-netback: only remove 'hotplug-status' when the vif is actually destroyed

[ Upstream commit c55f34b6aec2a8cb47eadaffea773e83bf85de91 ]

Removing 'hotplug-status' in backend_disconnected() means that it will be
removed even in the case that the frontend unilaterally disconnects (which
it is free to do at any time). The consequence of this is that, when the
frontend attempts to re-connect, the backend gets stuck in 'InitWait'
rather than moving straight to 'Connected' (which it can do because the
hotplug script has already run).
Instead, the 'hotplug-status' mode should be removed in netback_remove()
i.e. when the vif really is going away.

Fixes: 0f4558ae9187 ("Revert "xen-netback: remove 'hotplug-status' once it has served its purpose"")
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iavf: Detach device during reset task

[ Upstream commit aa626da947e9cd30c4cf727493903e1adbb2c0a0 ]

iavf_reset_task() takes crit_lock at the beginning and holds
it during whole call. The function subsequently calls
iavf_init_interrupt_scheme() that grabs RTNL. Problem occurs
when userspace initiates during the reset task any ndo callback
that runs under RTNL like iavf_open() because some of that
functions tries to take crit_lock. This leads to classic A-B B-A
deadlock scenario.

To resolve this situation the device should be detached in
iavf_reset_task() prior taking crit_lock to avoid subsequent
ndos running under RTNL and reattach the device at the end.

Fixes: 62fe2a865e6d ("i40evf: add missing rtnl_lock() around i40evf_set_interrupt_capability")
Cc: Jacob Keller <jacob.e.keller@intel.com>
Cc: Patryk Piotrowski <patryk.piotrowski@intel.com>
Cc: SlawomirX Laba <slawomirx.laba@intel.com>
Tested-by: Vitaly Grinberg <vgrinber@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: Fix kernel crash during module removal

[ Upstream commit fb8396aeda5872369a8ed6d2301e2c86e303c520 ]

The driver incorrectly frees client instance and subsequent
i40e module removal leads to kernel crash.

Reproducer:
1. Do ethtool offline test followed immediately by another one
host# ethtool -t eth0 offline; ethtool -t eth0 offline
2. Remove recursively irdma module that also removes i40e module
host# modprobe -r irdma

Result:
[ 8675.035651] i40e 0000:3d:00.0 eno1: offline testing starting
[ 8675.193774] i40e 0000:3d:00.0 eno1: testing finished
[ 8675.201316] i40e 0000:3d:00.0 eno1: offline testing starting
[ 8675.358921] i40e 0000:3d:00.0 eno1: testing finished
[ 8675.496921] i40e 0000:3d:00.0: IRDMA hardware initialization FAILED init_state=2 status=-110
[ 8686.188955] i40e 0000:3d:00.1: i40e_ptp_stop: removed PHC on eno2
[ 8686.943890] i40e 0000:3d:00.1: Deleted LAN device PF1 bus=0x3d dev=0x00 func=0x01
[ 8686.952669] i40e 0000:3d:00.0: i40e_ptp_stop: removed PHC on eno1
[ 8687.761787] BUG: kernel NULL pointer dereference, address: 0000000000000030
[ 8687.768755] #PF: supervisor read access in kernel mode
[ 8687.773895] #PF: error_code(0x0000) - not-present page
[ 8687.779034] PGD 0 P4D 0
[ 8687.781575] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 8687.785935] CPU: 51 PID: 172891 Comm: rmmod Kdump: loaded Tainted: G        W I        5.19.0+ #2
[ 8687.794800] Hardware name: Intel Corporation S2600WFD/S2600WFD, BIOS SE5C620.86B.0X.02.0001.051420190324 05/14/2019
[ 8687.805222] RIP: 0010:i40e_lan_del_device+0x13/0xb0 [i40e]
[ 8687.810719] Code: d4 84 c0 0f 84 b8 25 01 00 e9 9c 25 01 00 41 bc f4 ff ff ff eb 91 90 0f 1f 44 00 00 41 54 55 53 48 8b 87 58 08 00 00 48 89 fb <48> 8b 68 30 48 89 ef e8 21 8a 0f d5 48 89 ef e8 a9 78 0f d5 48 8b
[ 8687.829462] RSP: 0018:ffffa604072efce0 EFLAGS: 00010202
[ 8687.834689] RAX: 0000000000000000 RBX: ffff8f43833b2000 RCX: 0000000000000000
[ 8687.841821] RDX: 0000000000000000 RSI: ffff8f4b0545b298 RDI: ffff8f43833b2000
[ 8687.848955] RBP: ffff8f43833b2000 R08: 0000000000000001 R09: 0000000000000000
[ 8687.856086] R10: 0000000000000000 R11: 000ffffffffff000 R12: ffff8f43833b2ef0
[ 8687.863218] R13: ffff8f43833b2ef0 R14: ffff915103966000 R15: ffff8f43833b2008
[ 8687.870342] FS:  00007f79501c3740(0000) GS:ffff8f4adffc0000(0000) knlGS:0000000000000000
[ 8687.878427] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 8687.884174] CR2: 0000000000000030 CR3: 000000014276e004 CR4: 00000000007706e0
[ 8687.891306] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 8687.898441] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 8687.905572] PKRU: 55555554
[ 8687.908286] Call Trace:
[ 8687.910737]  <TASK>
[ 8687.912843]  i40e_remove+0x2c0/0x330 [i40e]
[ 8687.917040]  pci_device_remove+0x33/0xa0
[ 8687.920962]  device_release_driver_internal+0x1aa/0x230
[ 8687.926188]  driver_detach+0x44/0x90
[ 8687.929770]  bus_remove_driver+0x55/0xe0
[ 8687.933693]  pci_unregister_driver+0x2a/0xb0
[ 8687.937967]  i40e_exit_module+0xc/0xf48 [i40e]

Two offline tests cause IRDMA driver failure (ETIMEDOUT) and this
failure is indicated back to i40e_client_subtask() that calls
i40e_client_del_instance() to free client instance referenced
by pf->cinst and sets this pointer to NULL. During the module
removal i40e_remove() calls i40e_lan_del_device() that dereferences
pf->cinst that is NULL -> crash.
Do not remove client instance when client open callbacks fails and
just clear __I40E_CLIENT_INSTANCE_OPENED bit. The driver also needs
to take care about this situation (when netdev is up and client
is NOT opened) in i40e_notify_client_of_netdev_close() and
calls client close callback only when __I40E_CLIENT_INSTANCE_OPENED
is set.

Fixes: 0ef2d5afb12d ("i40e: KISS the client interface")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Helena Anna Dubel <helena.anna.dubel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: use bitmap_free instead of devm_kfree

[ Upstream commit 59ac325557b6c14f1f793b90d3946bc145ffa085 ]

pf->avail_txqs was allocated using bitmap_zalloc, bitmap_free should be
used to free this memory.

Fixes: 78b5713ac1241 ("ice: Alloc queue management bitmaps and arrays dynamically")
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: TX zerocopy should not sense pfmemalloc status

[ Upstream commit 3261400639463a853ba2b3be8bd009c2a8089775 ]

We got a recent syzbot report [1] showing a possible misuse
of pfmemalloc page status in TCP zerocopy paths.

Indeed, for pages coming from user space or other layers,
using page_is_pfmemalloc() is moot, and possibly could give
false positives.

There has been attempts to make page_is_pfmemalloc() more robust,
but not using it in the first place in this context is probably better,
removing cpu cycles.

Note to stable teams :

You need to backport 84ce071e38a6 ("net: introduce
__skb_fill_page_desc_noacc") as a prereq.

Race is more probable after commit c07aea3ef4d4
("mm: add a signature in struct page") because page_is_pfmemalloc()
is now using low order bit from page->lru.next, which can change
more often than page->index.

Low order bit should never be set for lru.next (when used as an anchor
in LRU list), so KCSAN report is mostly a false positive.

Backporting to older kernel versions seems not necessary.

[1]
BUG: KCSAN: data-race in lru_add_fn / tcp_build_frag

write to 0xffffea0004a1d2c8 of 8 bytes by task 18600 on cpu 0:
__list_add include/linux/list.h:73 [inline]
list_add include/linux/list.h:88 [inline]
lruvec_add_folio include/linux/mm_inline.h:105 [inline]
lru_add_fn+0x440/0x520 mm/swap.c:228
folio_batch_move_lru+0x1e1/0x2a0 mm/swap.c:246
folio_batch_add_and_move mm/swap.c:263 [inline]
folio_add_lru+0xf1/0x140 mm/swap.c:490
filemap_add_folio+0xf8/0x150 mm/filemap.c:948
__filemap_get_folio+0x510/0x6d0 mm/filemap.c:1981
pagecache_get_page+0x26/0x190 mm/folio-compat.c:104
grab_cache_page_write_begin+0x2a/0x30 mm/folio-compat.c:116
ext4_da_write_begin+0x2dd/0x5f0 fs/ext4/inode.c:2988
generic_perform_write+0x1d4/0x3f0 mm/filemap.c:3738
ext4_buffered_write_iter+0x235/0x3e0 fs/ext4/file.c:270
ext4_file_write_iter+0x2e3/0x1210
call_write_iter include/linux/fs.h:2187 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x468/0x760 fs/read_write.c:578
ksys_write+0xe8/0x1a0 fs/read_write.c:631
__do_sys_write fs/read_write.c:643 [inline]
__se_sys_write fs/read_write.c:640 [inline]
__x64_sys_write+0x3e/0x50 fs/read_write.c:640
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

read to 0xffffea0004a1d2c8 of 8 bytes by task 18611 on cpu 1:
page_is_pfmemalloc include/linux/mm.h:1740 [inline]
__skb_fill_page_desc include/linux/skbuff.h:2422 [inline]
skb_fill_page_desc include/linux/skbuff.h:2443 [inline]
tcp_build_frag+0x613/0xb20 net/ipv4/tcp.c:1018
do_tcp_sendpages+0x3e8/0xaf0 net/ipv4/tcp.c:1075
tcp_sendpage_locked net/ipv4/tcp.c:1140 [inline]
tcp_sendpage+0x89/0xb0 net/ipv4/tcp.c:1150
inet_sendpage+0x7f/0xc0 net/ipv4/af_inet.c:833
kernel_sendpage+0x184/0x300 net/socket.c:3561
sock_sendpage+0x5a/0x70 net/socket.c:1054
pipe_to_sendpage+0x128/0x160 fs/splice.c:361
splice_from_pipe_feed fs/splice.c:415 [inline]
__splice_from_pipe+0x222/0x4d0 fs/splice.c:559
splice_from_pipe fs/splice.c:594 [inline]
generic_splice_sendpage+0x89/0xc0 fs/splice.c:743
do_splice_from fs/splice.c:764 [inline]
direct_splice_actor+0x80/0xa0 fs/splice.c:931
splice_direct_to_actor+0x305/0x620 fs/splice.c:886
do_splice_direct+0xfb/0x180 fs/splice.c:974
do_sendfile+0x3bf/0x910 fs/read_write.c:1249
__do_sys_sendfile64 fs/read_write.c:1317 [inline]
__se_sys_sendfile64 fs/read_write.c:1303 [inline]
__x64_sys_sendfile64+0x10c/0x150 fs/read_write.c:1303
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

value changed: 0x0000000000000000 -> 0xffffea0004a1d288

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 18611 Comm: syz-executor.4 Not tainted 6.0.0-rc2-syzkaller-00248-ge022620b5d05-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/22/2022

Fixes: c07aea3ef4d4 ("mm: add a signature in struct page")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: introduce __skb_fill_page_desc_noacc

[ Upstream commit 84ce071e38a6e25ea3ea91188e5482ac1f17b3af ]

Managed pages contain pinned userspace pages and controlled by upper
layers, there is no need in tracking skb->pfmemalloc for them. Introduce
a helper for filling frags but ignoring page tracking, it'll be needed
later.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tipc: fix shift wrapping bug in map_get()

[ Upstream commit e2b224abd9bf45dcb55750479fc35970725a430b ]

There is a shift wrapping bug in this code so anything thing above
31 will return false.

Fixes: 35c55c9877f8 ("tipc: add neighbor monitoring framework")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sch_sfb: Don't assume the skb is still around after enqueueing to child

[ Upstream commit 9efd23297cca530bb35e1848665805d3fcdd7889 ]

The sch_sfb enqueue() routine assumes the skb is still alive after it has
been enqueued into a child qdisc, using the data in the skb cb field in the
increment_qlen() routine after enqueue. However, the skb may in fact have
been freed, causing a use-after-free in this case. In particular, this
happens if sch_cake is used as a child of sfb, and the GSO splitting mode
of CAKE is enabled (in which case the skb will be split into segments and
the original skb freed).

Fix this by copying the sfb cb data to the stack before enqueueing the skb,
and using this stack copy in increment_qlen() instead of the skb pointer
itself.

Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-18231
Fixes: e13e02a3c68d ("net_sched: SFB flow scheduler")
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "net: phy: meson-gxl: improve link-up behavior"

[ Upstream commit 7fdc77665f3d45c9da7c6edd4beadee9790f43aa ]

This reverts commit 2c87c6f9fbddc5b84d67b2fa3f432fcac6d99d93.
Meanwhile it turned out that the following commit is the proper
workaround for the issue that 2c87c6f9fbdd tries to address.
a3a57bf07de2 ("net: stmmac: work around sporadic tx issue on link-up")
It's nor clear why the to be reverted commit helped for one user,
for others it didn't make a difference.

Fixes: 2c87c6f9fbdd ("net: phy: meson-gxl: improve link-up behavior")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/8deeeddc-6b71-129b-1918-495a12dc11e3@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

afs: Use the operation issue time instead of the reply time for callbacks

[ Upstream commit 7903192c4b4a82d792cb0dc5e2779a2efe60d45b ]

rxrpc and kafs between them try to use the receive timestamp on the first
data packet (ie. the one with sequence number 1) as a base from which to
calculate the time at which callback promise and lock expiration occurs.

However, we don't know how long it took for the server to send us the reply
from it having completed the basic part of the operation - it might then,
for instance, have to send a bunch of a callback breaks, depending on the
particular operation.

Fix this by using the time at which the operation is issued on the client
as a base instead.  That should never be longer than the server's idea of
the expiry time.

Fixes: 781070551c26 ("afs: Fix calculation of callback expiry time")
Fixes: 2070a3e44962 ("rxrpc: Allow the reply time to be obtained on a client call")
Suggested-by: Jeffrey E Altman <jaltman@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rxrpc: Fix an insufficiently large sglist in rxkad_verify_packet_2()

[ Upstream commit 0d40f728e28393a8817d1fcae923dfa3409e488c ]

rxkad_verify_packet_2() has a small stack-allocated sglist of 4 elements,
but if that isn't sufficient for the number of fragments in the socket
buffer, we try to allocate an sglist large enough to hold all the
fragments.

However, for large packets with a lot of fragments, this isn't sufficient
and we need at least one additional fragment.

The problem manifests as skb_to_sgvec() returning -EMSGSIZE and this then
getting returned by userspace.  Most of the time, this isn't a problem as
rxrpc sets a limit of 5692, big enough for 4 jumbo subpackets to be glued
together; occasionally, however, the server will ignore the reported limit
and give a packet that's a lot bigger - say 19852 bytes with ->nr_frags
being 7.  skb_to_sgvec() then tries to return a "zeroth" fragment that
seems to occur before the fragments counted by ->nr_frags and we hit the
end of the sglist too early.

Note that __skb_to_sgvec() also has an skb_walk_frags() loop that is
recursive up to 24 deep.  I'm not sure if I need to take account of that
too - or if there's an easy way of counting those frags too.

Fix this by counting an extra frag and allocating a larger sglist based on
that.

Fixes: d0d5c0cd1e71 ("rxrpc: Use skb_unshare() rather than skb_cow_data()")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

rxrpc: Fix ICMP/ICMP6 error handling

[ Upstream commit ac56a0b48da86fd1b4389632fb7c4c8a5d86eefa ]

Because rxrpc pretends to be a tunnel on top of a UDP/UDP6 socket, allowing
it to siphon off UDP packets early in the handling of received UDP packets
thereby avoiding the packet going through the UDP receive queue, it doesn't
get ICMP packets through the UDP ->sk_error_report() callback.  In fact, it
doesn't appear that there's any usable option for getting hold of ICMP
packets.

Fix this by adding a new UDP encap hook to distribute error messages for
UDP tunnels.  If the hook is set, then the tunnel driver will be able to
see ICMP packets.  The hook provides the offset into the packet of the UDP
header of the original packet that caused the notification.

An alternative would be to call the ->error_handler() hook - but that
requires that the skbuff be cloned (as ip_icmp_error() or ipv6_cmp_error()
do, though isn't really necessary or desirable in rxrpc's case is we want
to parse them there and then, not queue them).

Changes
=======
ver #3)
 - Fixed an uninitialised variable.

ver #2)
 - Fixed some missing CONFIG_AF_RXRPC_IPV6 conditionals.

Fixes: 5271953cad31 ("rxrpc: Use the UDP encap_rcv hook")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: usb-audio: Register card again for iface over delayed_register option

[ Upstream commit 2027f114686e0f3f1f39971964dfc618637c88c2 ]

When the delayed registration is specified via either delayed_register
option or the quirk, we delay the invocation of snd_card_register()
until the given interface.  But if a wrong value has been set there
and there are more interfaces over the given interface number,
snd_card_register() call would be missing for those interfaces.

This patch catches up those missing calls by fixing the comparison of
the interface number.  Now the call is skipped only if the processed
interface is less than the given interface, instead of the exact
match.

Fixes: b70038ef4fea ("ALSA: usb-audio: Add delayed_register option")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216082
Link: https://lore.kernel.org/r/20220831125901.4660-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: usb-audio: Inform the delayed registration more properly

[ Upstream commit 7e1afce5866e02b45bf88c27dd7de1b9dfade1cc ]

The info message that was added in the commit a4aad5636c72 ("ALSA:
usb-audio: Inform devices that need delayed registration") is actually
useful to know the need for the delayed registration.  However, it
turned out that this doesn't catch the all cases; namely, this warned
only when a PCM stream is attached onto the existing PCM instance, but
it doesn't count for a newly created PCM instance.  This made
confusion as if there were no further delayed registration.

This patch moves the check to the code path for either adding a stream
or creating a PCM instance.  Also, make it simpler by checking the
card->registered flag instead of querying each snd_device state.

Fixes: a4aad5636c72 ("ALSA: usb-audio: Inform devices that need delayed registration")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216082
Link: https://lore.kernel.org/r/20220831125901.4660-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>