drm/connector: demote connector force-probes for non-master clients

Force-probing a connector can be slow and cause flickering. As this
affects the global KMS state, let's make it so only the DRM master
can force-probe a connector.

Non-master DRM clients won't be able to force-probe a connector
anymore. Instead, KMS will perform a regular read-only connector
query.

Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210402112212.5625-1-contact@emersion.fr

drm/simpledrm: Acquire memory aperture for framebuffer

We register the simplekms device with the DRM platform helpers. A
native driver for the graphics hardware will kick-out the simpledrm
driver before taking over the device.

The original generic platform device from the simple-framebuffer boot
code will be unregistered. The native driver will use whatever native
hardware device it received.

v4:
* convert to drm_aperture_acquire_from_firmware()
v3:
* use platform_device_unregister() and handle detachment
  like hot-unplug event (Daniel)
v2:
* adapt to aperture changes
* use drm_dev_unplug() and drm_dev_enter/exit()
* don't split error string

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: nerdopolis <bluescreen_avenger@verizon.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-10-tzimmermann@suse.de

drm: Add simpledrm driver

The simpledrm driver is a DRM driver for simple-framebuffer framebuffers
as provided by the kernel's boot code. This driver enables basic
graphical output on many different graphics devices that are provided
by the platform (e.g., EFI, VESA, embedded framebuffers).

With the kernel's simple-framebuffer infrastructure, the kernel receives
a pre-configured framebuffer from the system (i.e., firmware, boot
loader). It creates a platform device to which simpledrm attaches.
The system's framebuffer consists of a memory range, size and format.
Based on these values, simpledrm creates a DRM devices. No actual
modesetting is possible.

A firmware framebuffer might also be specified via device-tree files. If
no device platform data is given, try the DT device node.

Make sure required hardware clocks and regulators are enabled while the
firmware framebuffer is in use. The basic code has been taken from the
simplefb driver and adapted to DRM. Clocks are released automatically
via devres helpers.

The drivers displays a console on simpledrm's framebuffer. The default
framebuffer format is being used.

v4:
* disable simplefb if simpledrm has been selected (Maxime)
v3:
* add disable function that clears screen to black (Daniel)
* set shadow buffering only for fbdev emulation
* set platform-driver data during device creation
v2:
* rename driver to simpledrm
* add dri-devel to MAINTAINERS entry
* put native format first in primary-plane format list (Daniel)
* inline simplekms_device_cleanup() (Daniel)
* use helpers for shadow-buffered planes
* fix whitespace errors
* add Device Tree match table
* clean-up parser wrappers
* use strscpy()

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> # fbdev support
Acked-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: nerdopolis <bluescreen_avenger@verizon.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-5-tzimmermann@suse.de
Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-6-tzimmermann@suse.de
Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-7-tzimmermann@suse.de
Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-8-tzimmermann@suse.de
Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-9-tzimmermann@suse.de

drm/aperture: Add infrastructure for aperture ownership

Platform devices might operate on firmware framebuffers, such as VESA or
EFI. Before a native driver for the graphics hardware can take over the
device, it has to remove any platform driver that operates on the firmware
framebuffer. Aperture helpers provide the infrastructure for platform
drivers to acquire firmware framebuffers, and for native drivers to remove
them later on.

It works similar to the related fbdev mechanism. During initialization, the
platform driver acquires the firmware framebuffer's I/O memory and provides
a callback to be removed. The native driver later uses this information to
remove any platform driver for it's framebuffer I/O memory.

The aperture removal code is integrated into the existing code for removing
conflicting framebuffers, so native drivers use it automatically.

v5:
* fix build error introduced by rebasing v4
* fix typo in documentation
v4:
* hide detach callback in implementation (Daniel)
* documentation fixes
v3:
* rebase onto existing aperture infrastructure
* release aperture from list during detach; fix dangling apertures
* don't export struct drm_aperture
* document struct drm_aperture_funcs
v2:
* rename plaform helpers to aperture helpers
* tie to device lifetime with devm_ functions
* removed unsued remove() callback
* rename kickout to detach
* make struct drm_aperture private
* rebase onto existing drm_aperture.h header file
* use MIT license only for simplicity
* documentation

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: nerdopolis <bluescreen_avenger@verizon.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-4-tzimmermann@suse.de

drm/format-helper: Add blitter functions

The blitter functions copy a framebuffer to I/O memory using one of
the existing conversion functions.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: nerdopolis <bluescreen_avenger@verizon.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-3-tzimmermann@suse.de

drm/format-helper: Pass destination pitch to drm_fb_memcpy_dstclip()

The memcpy's destination buffer might have a different pitch than the
source. Support different pitches as function argument.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: nerdopolis <bluescreen_avenger@verizon.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-2-tzimmermann@suse.de

drm/i915: Use the correct max source link rate for MST

[why]
Previously used value was not safe to provide the correct value, i.e. it
could be 0 if not not configured, leading to no MST on this platform.

[how]
Do not use the value from BIOS, but from the structure populated at
encoder initialization time.

Fixes: 98025a62cb00 ("drm/dp_mst: Use Extended Base Receiver Capability DPCD space")
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[fixed open coded drm_dp_link_rate_to_bw_code()]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430214531.24565-2-nikola.cornij@amd.com

drm/panel: panel-simple: Add missing pm_runtime_disable() calls

In commit 3235b0f20a0a ("drm/panel: panel-simple: Use runtime pm to
avoid excessive unprepare / prepare") we started using pm_runtime, but
my patch neglected to add the proper pm_runtime_disable(). Doh! Add
them now.

Fixes: 3235b0f20a0a ("drm/panel: panel-simple: Use runtime pm to avoid excessive unprepare / prepare")
Reported-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423095743.v5.1.I9e6af2529d6c61e5daf86a15a1211121c5223b9a@changeid

drm/bridge: nwl-dsi: Get MIPI DSI controller and PHY ready in ->mode_set()

Some MIPI DSI panel drivers like 'raydium,rm68200' send
MIPI_DCS_SET_DISPLAY_ON commands in panel_funcs->prepare(), which
requires the MIPI DSI controller and PHY to be ready beforehand.
Without this patch, the nwl-dsi driver gets the MIPI DSI controller
and PHY ready in bridge_funcs->atomic_pre_enable(), which happens after
the panel_funcs->prepare().  So, this patch shifts the bridge operation
ealier from bridge_funcs->atomic_pre_enable() to bridge_funcs->mode_set().
This way, more MIPI DSI panels can connect to this nwl-dsi bridge.

Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Robert Chiras <robert.chiras@nxp.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1619170003-4817-4-git-send-email-victor.liu@nxp.com

drm/bridge: nwl-dsi: Remove a check on unchanged HS clock rate from ->mode_set()

The check on unchanged HS clock rate in ->mode_set() improves
the callback's performance a bit by early return.  However,
the up-coming patch would get MIPI DSI controller and PHY ready
in ->mode_set() after that check, thus likely skipped.
So, this patch removes that check to make sure MIPI DSI controller
and PHY will be brought up and taken down from ->mode_set() and
->atomic_disable() respectively in pairs.

Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Robert Chiras <robert.chiras@nxp.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1619170003-4817-3-git-send-email-victor.liu@nxp.com

drm/bridge: nwl-dsi: Force a full modeset when crtc_state->active is changed to be true

This patch replaces ->mode_fixup() with ->atomic_check() so that
a full modeset can be requested from there when crtc_state->active
is changed to be true(which implies only connector's DPMS is brought
out of "Off" status, though not necessarily).  Bridge functions are
added or changed to accommodate the ->atomic_check() callback.  That
full modeset is needed by the up-coming patch which gets MIPI DSI
controller and PHY ready in ->mode_set(), because it makes sure
->mode_set() and ->atomic_disable() are called in pairs.

Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Robert Chiras <robert.chiras@nxp.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1619170003-4817-2-git-send-email-victor.liu@nxp.com

drm/panel: Add DT bindings for Samsung LMS397KF04

This adds device tree bindings for the Samsung LMS397KF04
RGB DPI display panel.

Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210405234713.3190693-1-linus.walleij@linaro.org

drm/dp_mst: Use Extended Base Receiver Capability DPCD space

[why]
DP 1.4a spec mandates that if DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT is
set, Extended Base Receiver Capability DPCD space must be used. Without
doing that, the three DPCD values that differ will be wrong, leading to
incorrect or limited functionality. MST link rate, for example, could
have a lower value. Also, Synaptics quirk wouldn't work out well when
Extended DPCD was not read, resulting in no DSC for such hubs.

[how]
Modify MST topology manager to use the values from Extended DPCD where
applicable.

To prevent regression on the sources that have a lower maximum link rate
capability than MAX_LINK_RATE from Extended DPCD, have the drivers
supply maximum lane count and rate at initialization time.

This also reverts commit 2dcab875e763 ("Revert drm/dp_mst: Retrieve
extended DPCD caps for topology manager"), brining the change back to the
original commit ad44c03208e4 ("drm/dp_mst: Retrieve extended DPCD caps for
topology manager").

Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210429221151.22020-2-nikola.cornij@amd.com

drm/vkms: add overlay support

Add support to overlay plane, in addition to primary and cursor
planes. In this approach, the plane composition still requires an
active primary plane and planes are composed associatively in the
order: (primary <- overlay) <- cursor

It enables to run the following IGT tests successfully:
- kms_plane_cursor:
  - pipe-A-[overlay, primary, viewport]-size-[64, 128, 256]
- kms_atomic:
  - plane-overlay-legacy
and preserves the successful execution of kms_cursor_crc,
kms_writeback and kms_flip

Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/8261bf93d8a0e3ffaf81d8e7c9b3e9c229116be3.1619250933.git.melissa.srw@gmail.com

drm/vkms: add XRGB planes composition

Add support for composing XRGB888 planes in addition to the ARGB8888
format. In the case of an XRGB plane at the top, the composition consists
of copying the RGB values of a pixel from src to dst and clearing alpha
channel, without the need for alpha blending operations for each pixel.

Blend equations assume a completely opaque background, i.e., primary plane
is not cleared before pixel blending but alpha channel is explicitly
opaque (a = 0xff). Also, there is room for performance evaluation in
switching pixel blend operation according to the plane format.

v4:
- clear alpha channel (0xff) after blend color values by pixel
- improve comments on blend ops to reflect the current state
- describe in the commit message future improvements for plane composition

Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/07bcf4643d11da9480599fe1b165e478bff58b25.1619250933.git.melissa.srw@gmail.com

drm/vkms: rename cursor to plane on ops of planes composition

Generalize variables and function names used for planes composition
(from cursor to plane), since we will reuse the operations for both
cursor and overlay types.

No functional change.

v4:
- use better names for functions of plane composition (Daniel)

Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/ef3249c9ac3a08b7079894f9f1ccf70960194ec7.1619250933.git.melissa.srw@gmail.com

drm/vkms: init plane using drmm_universal_plane_alloc

By using drmm_universal_plane_alloc instead of
drm_universal_plane_init, we let the DRM infrastructure handles
resource allocation and cleanup. We can also get rid of some
code repetitions for plane cleanup, improving code maintainability
in vkms.

Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/3bbdabed0274d2d0917d1b829dd16f13d7b495f5.1619250933.git.melissa.srw@gmail.com

drm: Move struct drm_device.pdev to legacy section

Struct drm_device.pdev is being moved to legacy status as only legacy
DRM drivers use it. A possible follow-up patchset could remove pdev
entirely.

v4:
* rebased

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210429105101.25667-6-tzimmermann@suse.de

drm/i915: Don't assign to struct drm_device.pdev

Using struct drm_device.pdev is deprecated. Don't assign it. Users
should upcast from struct drm_device.dev.

v6:
* also fix the assignment in selftests in this patch (Chris)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210429105101.25667-5-tzimmermann@suse.de

drm/i915: Remove reference to struct drm_device.pdev

References to struct drm_device.pdev should not be used any longer as
the field will be moved into the struct's legacy section. Fix a rsp
comment.

v8:
* fix commit message (Michael)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210429105101.25667-4-tzimmermann@suse.de

drm/i915/gt: Remove reference to struct drm_device.pdev

References to struct drm_device.pdev should not be used any longer as
the field will be moved into the struct's legacy section. Add a fix
for the rsp commit.

v8:
* fix commit message (Michael)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Fixes: a50ca39fbd01 ("drm/i915: setup the LMEM region")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Cc: "Michał Winiarski" <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210429105101.25667-3-tzimmermann@suse.de

drm/ast: Remove reference to struct drm_device.pdev

Using struct drm_device.pdev is deprecated. Upcast with to_pci_dev()
from struct drm_device.dev to get the PCI device structure.

v9:
* fix remaining pdev references

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Fixes: ba4e0339a6a3 ("drm/ast: Fixed CVE for DP501")
Cc: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210429105101.25667-2-tzimmermann@suse.de

drm/vmwgfx: replace idr_init() by idr_init_base()

idr_init() uses base 0 which is an invalid identifier for this driver.
The idr_alloc for this driver uses 1 as start value for ID range. The
new function idr_init_base allows IDR to set the ID lookup from base 1.
This avoids all lookups that otherwise starts from 0 since 0 is always
unused / available.

References: commit 6ce711f27500 ("idr: Make 1-based IDRs more efficient")

Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105190718.GA89863@localhost

drm/vmwgfx: use min_t to replace min

Use min_t to replace min, min_t is a bit fast because min use
twice typeof.
This patch also fix check_patch.pl warning:
WARNING: min() should probably be min_t(unsigned long, num_pages,
VMW_PPN_PER_REMAP)
+unsigned long nr = min(num_pages, (unsigned long)
VMW_PPN_PER_REMAP);

Signed-off-by: Bernard Zhao <bernard@vivo.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201119011146.107587-1-bernard@vivo.com

gpu: drm: vmwgfx: convert comma to semicolon

Replace a comma between expression statements by a semicolon.

Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201211085751.3089-1-zhengyongjun3@huawei.com

drm/vmwgfx/vmwgfx_validation: Use flexible-array member instead of zero-length array

Suppresses the following coccinelle warning:

drivers/gpu/drm/vmwgfx/vmwgfx_validation.c:85:15-22: WARNING use flexible-array member instead

Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323130204.45439-1-zou_wei@huawei.com

drm/vmwgfx: Fix a typo

s/particuar/particular/

Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210320211617.30746-1-unixbhaskar@gmail.com

drm/vc4: fix argument ordering in vc4_crtc_get_margins()

Cppcheck complains that the declaration doesn't match the function
definition.  Obviously "left" should come before "right".  The caller
and the function implementation are done this way, it's just the
declaration which is wrong so this doesn't affect runtime.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/YH/720FD978TPhHp@mwanda

drm/bridge: anx7625: Fix power on delay

>From anx7625 spec, the delay between powering on power supplies and gpio
should be larger than 10ms.

Fixes: 6c744983004e ("drm/bridge: anx7625: disable regulators when power off")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210428115116.931328-1-hsinyi@chromium.org

drm: bridge: add missing word in Analogix help text

Insert a missing word "power" in Kconfig help text.

Fixes: 6aa192698089 ("drm/bridge: Add Analogix anx6345 support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: Icenowy Zheng <icenowy@aosc.io>
Cc: Vasily Khoruzhick <anarsoul@gmail.com>
Cc: Torsten Duwe <duwe@suse.de>
Cc: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210424061817.7339-1-rdunlap@infradead.org

drm/dp_mst: Convert drm_dp_mst_topology.c to drm_err()/drm_dbg*()

And finally, convert all of the code in drm_dp_mst_topology.c over to using
drm_err() and drm_dbg*(). Note that this refactor would have been a lot
more complicated to have tried writing a coccinelle script for, so this
whole thing was done by hand.

v2:
* Fix line-wrapping in drm_dp_mst_atomic_check_mstb_bw_limit()

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-18-lyude@redhat.com
Reviewed-by: Dave Airlie <airlied@redhat.com>

drm/dp_dual_mode: Convert drm_dp_dual_mode_helper.c to using drm_err/drm_dbg_kms()

Next step in the conversion, move everything in drm_dp_dual_mode_helper.c
over to using drm_err() and drm_dbg_kms(). This was done using the
following cocci script:

  @@
  expression list expr;
  @@

  (
  - DRM_DEBUG_KMS(expr);
  + drm_dbg_kms(dev, expr);
  |
  - DRM_ERROR(expr);
  + drm_err(dev, expr);
  )

And correcting the indentation of the resulting code by hand.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-17-lyude@redhat.com
Reviewed-by: Dave Airlie <airlied@redhat.com>

drm/dp: Convert drm_dp_helper.c to using drm_err/drm_dbg_*()

Now that we've added a back-pointer to drm_device to drm_dp_aux, made
drm_dp_aux available to any functions in drm_dp_helper.c which need to
print to the kernel log, and ensured all of our logging uses a consistent
format, let's do the final step of the conversion and actually move
everything over to using drm_err() and drm_dbg_*().

This was done by using the following cocci script:

  @@
  expression list expr;
  @@

  (
  - DRM_DEBUG_KMS(expr);
  + drm_dbg_kms(aux->drm_dev, expr);
  |
  - DRM_DEBUG_DP(expr);
  + drm_dbg_dp(aux->drm_dev, expr);
  |
  - DRM_DEBUG_ATOMIC(expr);
  + drm_dbg_atomic(aux->drm_dev, expr);
  |
  - DRM_DEBUG_KMS_RATELIMITED(expr);
  + drm_dbg_kms_ratelimited(aux->drm_dev, expr);
  |
  - DRM_ERROR(expr);
  + drm_err(aux->drm_dev, expr);
  )

Followed by correcting the resulting line-wrapping in the results by hand.

v2:
* Fix indenting in drm_dp_dump_access

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-16-lyude@redhat.com
Reviewed-by: Dave Airlie <airlied@redhat.com>

drm/print: Handle potentially NULL drm_devices in drm_dbg_*

While this shouldn't really be something that happens all that often, since
we're going to be using the drm_dbg_* log helpers in DRM helpers it's
technically possible that a driver could use an AUX adapter before it's
been associated with it's respective drm_device. While drivers should take
care to avoid this, there's likely going to be situations where it's
difficult to workaround. And since other logging helpers in the kernel tend
to be OK with NULL pointers (for instance, passing a NULL pointer to a "%s"
argument for a printk-like function in the kernel doesn't break anything),
we should do the same for ours.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-15-lyude@redhat.com
Reviewed-by: Dave Airlie <airlied@redhat.com>

drm/dp_mst: Pass drm_dp_mst_topology_mgr to drm_dp_get_vc_payload_bw()

Since this is one of the few functions in drm_dp_mst_topology.c that
doesn't have any way of getting access to a drm_device, let's pass the
drm_dp_mst_topology_mgr down to this function so that it can use
drm_dbg_kms().

Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-14-lyude@redhat.com
Reviewed-by: Dave Airlie <airlied@redhat.com>

drm/dp_dual_mode: Pass drm_device to drm_lspcon_(get|set)_mode()

So that we can start using drm_dbg_*() throughout the DRM DP helpers.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-13-lyude@redhat.com
Reviewed-by: Dave Airlie <airlied@redhat.com>

drm/dp_dual_mode: Pass drm_device to drm_dp_dual_mode_get_tmds_output()

Another function to pass drm_device * down to so we can start using the
drm_dbg_*() in the DRM DP helpers.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-12-lyude@redhat.com
Reviewed-by: Dave Airlie <airlied@redhat.com>

drm/dp_dual_mode: Pass drm_device to drm_dp_dual_mode_max_tmds_clock()

Another function we need to pass drm_device down to in order to start using
drm_dbg_*().

Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-11-lyude@redhat.com
Reviewed-by: Dave Airlie <airlied@redhat.com>

drm/dp_dual_mode: Pass drm_device to drm_dp_dual_mode_set_tmds_output()

Another function that we'll need to pass a drm_device (and not drm_dp_aux)
down to so that we can move over to using drm_dbg_*().

Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-10-lyude@redhat.com
Reviewed-by: Dave Airlie <airlied@redhat.com>

drm/dp_dual_mode: Pass drm_device to drm_dp_dual_mode_detect()

Since we're about to be using drm_dbg_*() throughout the DP helpers, we'll
need to be able to access the DRM device in the dual mode DP helpers as
well. Note however that since drm_dp_dual_mode_detect() can be called with
DDC adapters that aren't part of a drm_dp_aux struct, we need to pass down
the drm_device to these functions instead of using drm_dp_aux.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-9-lyude@redhat.com
Reviewed-by: Dave Airlie <airlied@redhat.com>

drm/dp: Always print aux channel name in logs

Since we're about to convert everything in drm_dp_helper.c over to using
drm_dbg_*(), let's also make our logging more consistent in drm_dp_helper.c
while we're at it to ensure that we always print the name of the AUX
channel in question.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-8-lyude@redhat.com
Reviewed-by: Dave Airlie <airlied@redhat.com>

drm/dp: Pass drm_dp_aux to drm_dp*_link_train_channel_eq_delay()

So that we can start using drm_dbg_*() for
drm_dp_link_train_channel_eq_delay() and
drm_dp_lttpr_link_train_channel_eq_delay().

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-7-lyude@redhat.com
Reviewed-by: Dave Airlie <airlied@redhat.com>

drm/dp: Pass drm_dp_aux to drm_dp_link_train_clock_recovery_delay()

So that we can start using drm_dbg_*() in
drm_dp_link_train_clock_recovery_delay().

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-6-lyude@redhat.com
Reviewed-by: Dave Airlie <airlied@redhat.com>

drm/dp: Clarify DP AUX registration time

The docs we had for drm_dp_aux_init() and drm_dp_aux_register() were mostly
correct, except for the fact that they made the assumption that all AUX
devices were grandchildren of their respective DRM devices. This is the
case for most normal GPUs, but is almost never the case with SoCs and
display bridges. So, let's fix this documentation to clarify when the right
time to use drm_dp_aux_init() or drm_dp_aux_register() is.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-5-lyude@redhat.com
Reviewed-by: Dave Airlie <airlied@redhat.com>

drm/dp: Add backpointer to drm_device in drm_dp_aux

This is something that we've wanted for a while now: the ability to
actually look up the respective drm_device for a given drm_dp_aux struct.
This will also allow us to transition over to using the drm_dbg_*() helpers
for debug message printing, as we'll finally have a drm_device to reference
for doing so.

Note that there is one limitation with this - because some DP AUX adapters
exist as platform devices which are initialized independently of their
respective DRM devices, one cannot rely on drm_dp_aux->drm_dev to always be
non-NULL until drm_dp_aux_register() has been called. We make sure to point
this out in the documentation for struct drm_dp_aux.

v3:
* Add WARN_ON_ONCE() to drm_dp_aux_register() if drm_dev isn't filled out

Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-4-lyude@redhat.com
Reviewed-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/kms/nv50-: Move AUX adapter reg to connector late register/early unregister

Since AUX adapters on nouveau have their respective DRM connectors as
parents, we need to make sure that we register then after their connectors.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-3-lyude@redhat.com
Reviewed-by: Dave Airlie <airlied@redhat.com>

drm/bridge/cdns-mhdp8546: Register DP aux channel with userspace

Just adds some missing calls to
drm_dp_aux_register()/drm_dp_aux_unregister() for when we attach/detach the
bridge.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-2-lyude@redhat.com
Reviewed-by: Dave Airlie <airlied@redhat.com>

drm/drm_file.c: Define drm_send_event_helper() as 'static'

drm_send_event_helper() has not prototype, it has internal linkage and
therefore it should be defined with storage class 'static'.

Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210427105503.10765-1-fmdefrancesco@gmail.com

drm/bochs: Add screen blanking support

On bochs DRM driver, the execution of "setterm --blank force" results
in a frozen screen instead of a blank screen.  It's due to the lack of
the screen blanking support in its code.

Actually, the QEMU bochs vga side can switch to the blanking mode when
the bit 0x20 is cleared on VGA_ATT_IW register (0x3c0), which updates
ar_index in QEMU side.  So, essentially, we'd just need to clear the
bit at pipe disable callback; that's what this patch does essentially.

However, a tricky part is that the access via VGA_ATT_IW is done in
"flip-flop"; the first write is for index and the second write is for
the data like palette.  Meanwhile, in the current bochs DRM driver,
the flip-flop wasn't considered, and it calls only the register update
once with the value 0x20.

The spec and the actual VGA implementation in QEMU suggests that the
flip flop flag is discarded by reading the CRTC index register
(VGA_IS1_RC, 0x3da).  So, in this patch, we add the helper to read a
byte and the call to clear the flip flop flag before changing the
blank / unblank setup via VGA_ATT_IW register.

v1->v2:
* discard ar_flip_flop by reading 0x3da, add bochs_vga_readb()
* include video/vga.h for VGA register definitions
* move the blank/unblank code to bochs_hw_blank()

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421080859.14869-1-tiwai@suse.de

drm/ast: Fixed CVE for DP501

[Bug][DP501]
If ASPEED P2A (PCI to AHB) bridge is disabled and disallowed for
CVE_2019_6260 item3, and then the monitor's EDID is unable read through
Parade DP501.
The reason is the DP501's FW is mapped to BMC addressing space rather
than Host addressing space.
The resolution is that using "pci_iomap_range()" maps to DP501's FW that
stored on the end of FB (Frame Buffer).
In this case, FrameBuffer reserves the last 2MB used for the image of
DP501.

Signed-off-by: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421085859.17761-1-kuohsiang_chou@aspeedtech.com

drm/hx8357d: Avoid spamming logs if probe is deferred

The GPIO request can fail and probe may be deferred. Thus,
the error message may be printed again and again. Avoid
this by replacing DRM_DEV_ERROR() by dev_err_probe().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421163157.50949-7-andriy.shevchenko@linux.intel.com

drm/ili9225: Avoid spamming logs if probe is deferred

The GPIO request can fail and probe may be deferred. Thus,
the error message may be printed again and again. Avoid
this by replacing DRM_DEV_ERROR() by dev_err_probe().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421163157.50949-6-andriy.shevchenko@linux.intel.com

drm/ili9341: Avoid spamming logs if probe is deferred

The GPIO request can fail and probe may be deferred. Thus,
the error message may be printed again and again. Avoid
this by replacing DRM_DEV_ERROR() by dev_err_probe().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421163157.50949-5-andriy.shevchenko@linux.intel.com

drm/ili9486: Avoid spamming logs if probe is deferred

The GPIO request can fail and probe may be deferred. Thus,
the error message may be printed again and again. Avoid
this by replacing DRM_DEV_ERROR() by dev_err_probe().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421163157.50949-4-andriy.shevchenko@linux.intel.com

drm/mi0283qt: Avoid spamming logs if probe is deferred

The GPIO request can fail and probe may be deferred. Thus,
the error message may be printed again and again. Avoid
this by replacing DRM_DEV_ERROR() by dev_err_probe().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421163157.50949-3-andriy.shevchenko@linux.intel.com

drm/st7586: Avoid spamming logs if probe is deferred

The GPIO request can fail and probe may be deferred. Thus,
the error message may be printed again and again. Avoid
this by replacing DRM_DEV_ERROR() by dev_err_probe().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421163157.50949-2-andriy.shevchenko@linux.intel.com

drm/st7735r: Avoid spamming logs if probe is deferred

The GPIO request can fail and probe may be deferred. Thus,
the error message may be printed again and again. Avoid
this by replacing DRM_DEV_ERROR() by dev_err_probe().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421163157.50949-1-andriy.shevchenko@linux.intel.com

drm/gud: cleanup coding style a bit

Fix coccicheck warning:
drivers/gpu/drm/gud/gud_internal.h:89:2-3: Unneeded semicolon
drivers/gpu/drm/gud/gud_internal.h:107:2-3: Unneeded semicolon

Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210402085523.76928-1-bernard@vivo.com

drm/ast: Fix missing conversions to managed API

The commit 7cbb93d89838 ("drm/ast: Use managed pci functions")
converted a few PCI accessors to the managed API and dropped the
manual pci_iounmap() calls, but it seems to have forgotten converting
pci_iomap() to the managed one.  It resulted in the leftover resources
after the driver unbind.  Let's fix them.

Fixes: 7cbb93d89838 ("drm/ast: Use managed pci functions")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421170458.21178-1-tiwai@suse.de

drm: remove legacy drm_pci_alloc/free abstraction

The drm_pci_alloc/free abstraction of the dma-api is no longer required,
remove it.

Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423020248.3427369-2-joseph.kogut@gmail.com

drm: remove usage of drm_pci_alloc/free

Remove usage of legacy dma-api abstraction in preparation for removal

Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423020248.3427369-1-joseph.kogut@gmail.com

Merge drm/drm-next into drm-misc-next

Christian needs some patches from drm/next

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm: Remove DRM_KMS_FB_HELPER Kconfig option

It's only used by DRM_FBDEV_EMULATION, so inline it there.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210415110040.23525-5-tzimmermann@suse.de

drm/zte: Don't select DRM_KMS_FB_HELPER

Selecting DRM_FBDEV_EMULATION will include the correct settings for
fbdev emulation. Drivers should not override this.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210415110040.23525-4-tzimmermann@suse.de

drm/mxsfb: Don't select DRM_KMS_FB_HELPER

Selecting DRM_FBDEV_EMULATION will include the correct settings for
fbdev emulation. Drivers should not override this.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Stefan Agner <stefan@agner.ch>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210415110040.23525-3-tzimmermann@suse.de

drm/vmwgfx: Make console emulation depend on DRM_FBDEV_EMULATION

Respect DRM's kconfig setting for fbdev console emulation. If enabled,
it will select all required config options. So remove them from vmwgfx's
Kconfig file.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210415110040.23525-2-tzimmermann@suse.de

drm/ttm: move the page_alignment into the BO v2

The alignment is a constant property and shouldn't change.

v2: move documentation as well as suggested by Matthew.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210413135248.1266-4-christian.koenig@amd.com

drm/ttm: minor range manager coding style clean ups

No functional changes, just removing the leftovers from the redesign.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210413135248.1266-3-christian.koenig@amd.com

drm/ttm: remove special handling for non GEM drivers

vmwgfx is the only driver actually using this. Move the handling into
the driver instead.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210419092853.1605-1-christian.koenig@amd.com

drm/ttm: fix error handling if no BO can be swapped out v4

In case that all pre-allocated BOs are busy, just continue to populate
BOs since likely half of system memory in total is still free.

v4 (chk): fix code moved to VMWGFX as well

Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210422115757.3946-1-christian.koenig@amd.com

drm: bridge: adv7511: Support I2S IEC958 encoded PCM format

Support IEC958 encoded PCM format for ADV7511 so that ADV7511 HDMI
audio driver can accept the IEC958 data from the I2S input.

Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210422064015.15285-1-jee.heng.sia@intel.com

Merge tag 'drm-misc-next-fixes-2021-04-22' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

A few fixes for the next merge window, with some build fixes for anx7625
and lt8912b bridges, incorrect error handling for lt8912b and TTM, and
one fix for TTM page limit accounting.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210422163329.dvbuwre3akwdmzjt@gilmour

drm/ttm/ttm_device: Demote kernel-doc abuses

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/ttm/ttm_device.c:42: warning: Function parameter or member 'ttm_global_mutex' not described in 'DEFINE_MUTEX'
 drivers/gpu/drm/ttm/ttm_device.c:42: warning: expecting prototype for ttm_global_mutex(). Prototype was for DEFINE_MUTEX() instead
 drivers/gpu/drm/ttm/ttm_device.c:112: warning: Function parameter or member 'ctx' not described in 'ttm_global_swapout'
 drivers/gpu/drm/ttm/ttm_device.c:112: warning: Function parameter or member 'gfp_flags' not described in 'ttm_global_swapout'
 drivers/gpu/drm/ttm/ttm_device.c:112: warning: expecting prototype for A buffer object shrink method that tries to swap out the first(). Prototype was for ttm_global_swapout() instead

Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416143725.2769053-28-lee.jones@linaro.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>

drm/scheduler/sched_entity: Fix some function name disparity

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/scheduler/sched_entity.c:204: warning: expecting prototype for drm_sched_entity_kill_jobs(). Prototype was for drm_sched_entity_kill_jobs_cb() instead
 drivers/gpu/drm/scheduler/sched_entity.c:262: warning: expecting prototype for drm_sched_entity_cleanup(). Prototype was for drm_sched_entity_fini() instead
 drivers/gpu/drm/scheduler/sched_entity.c:305: warning: expecting prototype for drm_sched_entity_fini(). Prototype was for drm_sched_entity_destroy() instead

Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416143725.2769053-25-lee.jones@linaro.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>

drm/ttm/ttm_bo: Fix incorrectly documented function 'ttm_bo_cleanup_refs'

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/ttm/ttm_bo.c:293: warning: expecting prototype for function ttm_bo_cleanup_refs(). Prototype was for ttm_bo_cleanup_refs() instead

Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416143725.2769053-24-lee.jones@linaro.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>

drm: drm_connector.c: Use tabs for code indents

Remove space and use tabs for indent the code to follow the
Linux kernel coding conventions.
Problem found by checkpatch

Signed-off-by: Beatriz Martins de Carvalho <martinsdecarvalhobeatriz@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/0200474fbdb1149856308bccb8e467415f0b3d99.1618828127.git.martinsdecarvalhobeatriz@gmail.com

drm: drm_blend.c: Use tabs for code indents

Remove space and use tabs for indent the code to follow the
Linux kernel coding conventions.
Problem found by checkpatch.

Signed-off-by: Beatriz Martins de Carvalho <martinsdecarvalhobeatriz@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/f441188f84aac2f9f72f36a42c88623b16cd1f87.1618828127.git.martinsdecarvalhobeatriz@gmail.com

drm: drm_atomic_uapi.c: Use tabs for code indents

Remove space and use tabs for indent the code to follow the
Linux kernel coding conventions.
Problem found by checkpatch.

Signed-off-by: Beatriz Martins de Carvalho <martinsdecarvalhobeatriz@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/dc8286f5590fff609f924845fb622dd5f962a11b.1618828127.git.martinsdecarvalhobeatriz@gmail.com

drm: drm_context.c: Adjust end of block comment

Add a new line with */ on the last line of a block comment to follow the
Linux kernel coding conventions.
Problem found by checkpatch.

Signed-off-by: Beatriz Martins de Carvalho <martinsdecarvalhobeatriz@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/341b1ae1475fad22035cf3ff11df73cd49063d4c.1618756333.git.martinsdecarvalhobeatriz@gmail.com

drm: drm_connector.c: Adjust end of block comment

Add a new line with */ on the last line of a block comment to follow the
Linux kernel coding conventions.
Problem found by checkpatch.

Signed-off-by: Beatriz Martins de Carvalho <martinsdecarvalhobeatriz@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/59abdb2d65a643d5937e5773db684b926e8c9233.1618756333.git.martinsdecarvalhobeatriz@gmail.com

drm: drm_bufs.c: Adjust end of block comment

Add a new line with */ on the last line of a block comment to follow the
Linux kernel coding conventions.
Problem found by checkpatch.

Signed-off-by: Beatriz Martins de Carvalho <martinsdecarvalhobeatriz@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/c3a261994b88f6fc39f69ee8c1af8ab115d76a87.1618756333.git.martinsdecarvalhobeatriz@gmail.com

drm: drm_auth.c: Adjust end of block comment

Add a new line with */ on the last line of a block comment to follow the
Linux kernel coding conventions.
Problem found by checkpatch.

Signed-off-by: Beatriz Martins de Carvalho <martinsdecarvalhobeatriz@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/cd1e8f6637b914825ee4b9643a4e9d9eba49f276.1618756333.git.martinsdecarvalhobeatriz@gmail.com

drm: drm_atomic.c: Adjust end of block comment

Add a new line with */ on the last line of a block comment to follow the
Linux kernel coding conventions.
Problem found by checkpatch.

Signed-off-by: Beatriz Martins de Carvalho <martinsdecarvalhobeatriz@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/387b6b852a72d6a98133cead5e4d0e3c39dd5094.1618756333.git.martinsdecarvalhobeatriz@gmail.com

drm/todo: Add link to old debugfs RFC

I always forget where it was, store it until this gets picked up by an
internship again.

Cc: Wambui Karuga <wambui.karugax@gmail.com>
Cc: Melissa Wen <melissa.srw@gmail.com>
Acked-by: Melissa Wen <melissa.srw@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421152911.1871473-1-daniel.vetter@ffwll.ch

drm/gma500: remove trailing whitespaces

Remove trailing whitespaces.  No functional change.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210419081807.68000-2-krzysztof.kozlowski@canonical.com

drm/gma500: correct kerneldoc

Correct kerneldoc (remove wrong /** marker and adjust function name) to
fix W=1 warnings:

  drivers/gpu/drm/gma500/cdv_intel_lvds.c:27: warning:
    expecting prototype for LVDS I2C backlight control macros(). Prototype was for BRIGHTNESS_MAX_LEVEL() instead

  drivers/gpu/drm/gma500/intel_gmbus.c:386: warning:
    expecting prototype for intel_gmbus_setup(). Prototype was for gma_intel_setup_gmbus() instead

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210419081807.68000-1-krzysztof.kozlowski@canonical.com

drm/ttm: Don't count pages in SG BOs against pages_limit

Pages in SG BOs were not allocated by TTM. So don't count them against
TTM's pages limit.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210414064804.29356-9-Felix.Kuehling@amd.com

drm/ttm: fix return value check

The function returns the number of swapped pages here. Only abort when we get
a negative error code.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210409130113.1459-1-christian.koenig@amd.com

MAINTAINERS: add it66121 HDMI bridge driver entry

Add Neil Armstrong and myself as maintainers

Signed-off-by: Phong LE <ple@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210419071223.2673533-4-narmstrong@baylibre.com

drm: bridge: add it66121 driver

This commit is a simple driver for bridge HMDI it66121.
The input format is RBG and there is no color conversion.
Audio, HDCP and CEC are not supported yet.

Signed-off-by: Phong LE <ple@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210419071223.2673533-3-narmstrong@baylibre.com

dt-bindings: display: bridge: add it66121 bindings

Add the ITE bridge HDMI it66121 bindings.

Signed-off-by: Phong LE <ple@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210419071223.2673533-2-narmstrong@baylibre.com

drm/panel: panel-simple: Use runtime pm to avoid excessive unprepare / prepare

Unpreparing and re-preparing a panel can be a really heavy
operation. Panels datasheets often specify something on the order of
500ms as the delay you should insert after turning off the panel
before turning it on again. In addition, turning on a panel can have
delays on the order of 100ms - 200ms before the panel will assert HPD
(AKA "panel ready"). The above means that we should avoid turning a
panel off if we're going to turn it on again shortly.

The above becomes a problem when we want to read the EDID of a
panel. The way that ordering works is that userspace wants to read the
EDID of the panel _before_ fully enabling it so that it can set the
initial mode correctly. However, we can't read the EDID until we power
it up. This leads to code that does this dance (like
ps8640_bridge_get_edid()):

1. When userspace requests EDID / the panel modes (through an ioctl),
   we power on the panel just enough to read the EDID and then power
   it off.
2. Userspace then turns the panel on.

There's likely not much time between step #1 and #2 and so we want to
avoid powering the panel off and on again between those two steps.

Let's use Runtime PM to help us. We'll move the existing prepare() and
unprepare() to be runtime resume() and runtime suspend(). Now when we
want to prepare() or unprepare() we just increment or decrement the
refcount. We'll default to a 1 second autosuspend delay which seems
sane given the typical delays we see for panels.

A few notes:
- It seems the existing unprepare() and prepare() are defined to be
  no-ops if called extra times. We'll preserve that behavior but may
  try to remove it in a future patch.
- This is a slight change in the ABI of simple panel. If something was
  absolutely relying on the unprepare() to happen instantly that
  simply won't be the case anymore. I'm not aware of anyone relying on
  that behavior, but if there is someone then we'll need to figure out
  how to enable (or disable) this new delayed behavior selectively.
- In order for this to work we now have a hard dependency on
  "PM". From memory this is a legit thing to assume these days and we
  don't have to find some fallback to keep working if someone wants to
  build their system without "PM".

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416153909.v4.7.I9e8bd33b49c496745bfac58ea9ab418bd3b6f5ce@changeid

drm/bridge: ti-sn65dsi86: Get rid of the useless detect() function

If we just leave the detect() function as NULL then the upper layers
assume we're always connected. There's no reason for a stub.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416153909.v4.6.I826adf4faeb7f39f560b387f6b380e639c6986c8@changeid

drm/bridge: ti-sn65dsi86: Move drm_panel_unprepare() to post_disable()

We prepared the panel in pre_enable() so we should unprepare it in
post_disable() to match.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416153909.v4.5.Ia75c9ffe2a2582393a8532d244da86f18b4c9b21@changeid

drm/bridge: ti-sn65dsi86: Reorder remove()

Let's make the remove() function strictly the reverse of the probe()
function so it's easier to reason about.

This patch was created by code inspection and should move us closer to
a proper remove.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416153909.v4.4.Ifcf1deaa372eba7eeb4f8eb516c5d15b77a657a9@changeid

drm/bridge: ti-sn65dsi86: Remove incorrectly tagged kerneldoc comment

A random comment inside a function had "/**" in front of it. That
doesn't make sense. Remove.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416153909.v4.3.I167766eeaf4c4646a3934c4dd5332decbab6bd68@changeid

drm/bridge: ti-sn65dsi86: Simplify refclk handling

The clock framework makes it simple to deal with an optional clock.
You can call clk_get_optional() and if the clock isn't specified it'll
just return NULL without complaint. It's valid to pass NULL to
enable/disable/prepare/unprepare. Let's make use of this to simplify
things a tiny bit.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416153909.v4.2.Ic9c04f960190faad5290738b2a35d73661862735@changeid

drm/bridge: Fix the stop condition of drm_bridge_chain_pre_enable()

The drm_bridge_chain_pre_enable() is not the proper opposite of
drm_bridge_chain_post_disable(). It continues along the chain to
_before_ the starting bridge. Let's fix that.

Fixes: 05193dc38197 ("drm/bridge: Make the bridge chain a double-linked list")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416153909.v4.1.If62a003f76a2bc4ccc6c53565becc05d2aad4430@changeid

drm/meson: dw-hdmi: disable DW-HDMI CEC sub-driver

On the Amlogic SoCs, the DW-HDMI HW support is here but the DW-HDMI CEC signal
is not connected to a physical pin, leading to confusion when the dw-hdmi cec
controller can't communicate on the bus.

Disable it to avoid exposing a non-functinal bus.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416092737.1971876-3-narmstrong@baylibre.com

drm/bridge/synopsys: dw-hdmi: Add an option to suppress loading CEC driver

This adds DW-HDMI driver a glue option to disable loading of the CEC sub-driver.

On some SoCs, the CEC functionality is enabled in the IP config bits, but the
CEC bus is non-functional like on Amlogic SoCs, where the CEC config bit is set
but the DW-HDMI CEC signal is not connected to a physical pin, leading to some
confusion when the DW-HDMI CEC controller can't communicate on the bus.

Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416092737.1971876-2-narmstrong@baylibre.com