Jim Bankoski [Mon, 18 Aug 2014 22:41:58 +0000 (15:41 -0700)]
vp9_pickmode.c: check value that can be null to avoid warning
Change-Id: Ia023a49ddb606899171ff19f9e271ec8ed0b2fb3
Jim Bankoski [Mon, 18 Aug 2014 22:39:31 +0000 (15:39 -0700)]
vp9_ratectrl.c : remove dead assignment to clear warning
Change-Id: Iacc0b5c58032bde372ed9f99b87712547c4d8454
Jim Bankoski [Tue, 19 Aug 2014 13:16:13 +0000 (06:16 -0700)]
Merge "vp9_firstpass.c : clear warning re: use of null lc"
Yunqing Wang [Tue, 19 Aug 2014 02:00:24 +0000 (19:00 -0700)]
Merge "Add early termination in transform size search"
Jingning Han [Tue, 19 Aug 2014 00:58:43 +0000 (17:58 -0700)]
Merge "Speed up mode search depending on relative ref frame position"
Jim Bankoski [Mon, 18 Aug 2014 23:44:48 +0000 (16:44 -0700)]
vp9_firstpass.c : clear warning re: use of null lc
Change-Id: I80f81f6f4f15766f504c15f8c20258a84bbaa9ac
Yunqing Wang [Tue, 12 Aug 2014 21:36:42 +0000 (14:36 -0700)]
Add early termination in transform size search
In the full-rd transform size search, we go through all transform
sizes to choose the one with best rd score. In this patch, an
early termination is added to stop the search once we see that the
smaller size won't give better rd score than the larger size. Also,
the search starts from largest transform size, then goes down to
smallest size.
A speed feature tx_size_search_breakout is added, which is turned off
at speed 0, and on for other speeds. The transform size search is
turned on at speed 1.
Borg test results:
1. At speed 1,
derf set: psnr gain: 0.618%, ssim gain: 0.377%;
stdhd set: psnr gain: 0.594%, ssim gain: 0.162%;
No noticeable speed change.
3. At speed 2,
derf set: psnr loss: 0.157%, ssim loss: 0.175%;
stdhd set: psnr loss: 0.090%, ssim loss: 0.101%;
speed gain: ~4%.
Change-Id: I22535cd2017b5e54f2a62bb6a38231aea4268b3f
Jingning Han [Mon, 18 Aug 2014 17:42:23 +0000 (10:42 -0700)]
Speed up mode search depending on relative ref frame position
This commit enables the encoder to record the location of the
center frame to generate alter reference frame. It then allows to
skip checking prediction modes of other reference frame types when
it comes to encode this frame.
The speed 3 runtime is reduced for the test sequences:
bus at CIF 1000 kbps, 9791 ms -> 9446 ms, i.e., 3.5% speed-up,
pedestrian at 1080p 2000 kbps, 184043 ms -> 175730 ms, i.e., 4.5%
speed-up.
No compression performance change observed.
Change-Id: Iacfde3bcc1445964e7a241f239bd6ea11cb94bd1
Dmitry Kovalev [Mon, 18 Aug 2014 21:11:59 +0000 (14:11 -0700)]
Replacing SVC oxcf->mode check with oxcf->pass check.
oxcf->pass is used in all other places in similar contexts.
Change-Id: I9de3a5f24311838d5a6dc3dd470d258cb189ff59
Dmitry Kovalev [Mon, 18 Aug 2014 18:18:32 +0000 (11:18 -0700)]
Merge "set_maps: Flush encoder."
Dmitry Kovalev [Mon, 18 Aug 2014 18:18:26 +0000 (11:18 -0700)]
Merge "Removing vp9_rescale()."
Tom Finegan [Mon, 18 Aug 2014 17:47:41 +0000 (10:47 -0700)]
Merge "vpxenc.sh: Add 2-pass and lagged encode tests for VP8 and VP9."
Yaowu Xu [Mon, 18 Aug 2014 16:40:16 +0000 (09:40 -0700)]
Merge "Revert "Removing duplicated code from init_config().""
Jingning Han [Mon, 18 Aug 2014 16:28:04 +0000 (09:28 -0700)]
Merge "Remove unused variables in vp9_rd_pick_inter_mode_sb"
Jingning Han [Mon, 18 Aug 2014 16:27:56 +0000 (09:27 -0700)]
Merge "Remove unused code in vp9_rd_pick_inter_mode_sb"
Yaowu Xu [Mon, 18 Aug 2014 16:27:50 +0000 (09:27 -0700)]
Revert "Removing duplicated code from init_config()."
This reverts commit
5509b7fd8fe6ad3555831b8d49077182daf92758
Observed a big drop in compression quality and speed for speed 1 for a 360p test clip, revert this now for investigation.
Change-Id: If69dc8d77a225b34dc7907a9472e1a7a0a22762d
James Zern [Sat, 16 Aug 2014 17:08:13 +0000 (10:08 -0700)]
Merge "Add support for MIPS64."
Marco [Sat, 16 Aug 2014 13:08:31 +0000 (06:08 -0700)]
vp8: Add check on noise_sensitivity/denoiser on.
Change-Id: Ic53b2fb69e6eee600ea222e4d06424a1bbca496c
James Zern [Sat, 16 Aug 2014 04:02:41 +0000 (21:02 -0700)]
Merge "test/vpxenc.sh: Always use --test-decode=FATAL"
Johann [Fri, 15 Aug 2014 23:53:52 +0000 (16:53 -0700)]
test/vpxenc.sh: Always use --test-decode=FATAL
Change-Id: I5ca3400aec1f77fd92762d0c4fc86ba3694de1ca
Gordana Cmiljanovic [Thu, 7 Aug 2014 17:09:47 +0000 (19:09 +0200)]
Add support for MIPS64.
Change-Id: I78e27bf942b4a825543e76be25546b6458bad8b6
Pengchong Jin [Sat, 16 Aug 2014 02:51:04 +0000 (19:51 -0700)]
Merge "Add a speed feature to give the tighter search range"
James Zern [Sat, 16 Aug 2014 02:06:31 +0000 (19:06 -0700)]
Merge "frame_size_tests: reduce 'large' size for win32"
Dmitry Kovalev [Sat, 16 Aug 2014 00:15:17 +0000 (17:15 -0700)]
set_maps: Flush encoder.
According to the current API spec we need to call vpx_codec_encode() until
vpx_codec_get_cx_data() returns NULL.
Change-Id: I4617f8042d50480a8f47b0b7114d4759fa566b14
Dmitry Kovalev [Sat, 16 Aug 2014 00:13:37 +0000 (17:13 -0700)]
Merge "Removing duplicated code from init_config()."
Dmitry Kovalev [Sat, 16 Aug 2014 00:02:10 +0000 (17:02 -0700)]
Removing vp9_rescale().
Now everything is int64_t, so we don't need that function.
Change-Id: I7dd2023677b4943ecd968d68cc06f9d4862c3c3f
Johann [Fri, 15 Aug 2014 23:48:30 +0000 (16:48 -0700)]
Merge "Set uv_crop_height/width in all the places"
Pengchong Jin [Thu, 14 Aug 2014 03:07:39 +0000 (20:07 -0700)]
Add a speed feature to give the tighter search range
Add a speed feature to give the tighter partition search
range. Before partition search, calculate the histogram
of the partition sizes of the left, above and previous
co-located blocks of the current block. If the variance of
observed partition sizes is small enough, adjust the search
range around the mean partition size, which will be tigher.
The feature is currently turned on at speed 2. Experiments on
sample youtube clips show on average the runtime is reduced
by 3-7%.
For hard stdhd clips:
park_joy_1080p @ 15000kbps: 509251 ms -> 491953 ms (3.3%)
pedestrian_area_1080p @ 2000kbps: 223941 ms -> 214226 ms (4.3%)
The PSNR performance is changed:
derf: -0.112%
yt: -0.099%
hd: -0.090%
stdhd:-0.102%
Change-Id: Ie205ec5325bf92ec5676c243e30ba9d0adca10f2
Tom Finegan [Fri, 15 Aug 2014 22:56:58 +0000 (15:56 -0700)]
vpxenc.sh: Add 2-pass and lagged encode tests for VP8 and VP9.
- Fix nit: make test function definitions match test order.
- Fix nit: use elog instead of echo for env verification error.
Change-Id: I0eec078fc056a5bb2bd88d5833e43de48d77ec08
Dmitry Kovalev [Fri, 15 Aug 2014 22:31:43 +0000 (15:31 -0700)]
Merge "Simplifying vp9_set_speed_features() function."
Jingning Han [Fri, 15 Aug 2014 22:12:21 +0000 (15:12 -0700)]
Remove unused variables in vp9_rd_pick_inter_mode_sb
Change-Id: Ib52e1ce5aa4a22d70e124c3c29a92e00ffac50e4
Yunqing Wang [Fri, 15 Aug 2014 22:22:33 +0000 (15:22 -0700)]
Merge "Remove a unused speed feature"
Jingning Han [Fri, 15 Aug 2014 22:06:47 +0000 (15:06 -0700)]
Remove unused code in vp9_rd_pick_inter_mode_sb
Change-Id: I4f0bac3367b1a7c5e7f746b97ca619b81c8dfc49
Johann [Fri, 15 Aug 2014 17:50:40 +0000 (10:50 -0700)]
Set uv_crop_height/width in all the places
When configuring the buffer make sure to set all the (now) required
fields. Use the canonical variables and match the style from vpx_scale.
https://code.google.com/p/webm/issues/detail?id=841
Change-Id: I71b43d4a03756b8b2d6d60fdf8d7bf41b8041787
James Zern [Fri, 15 Aug 2014 21:39:28 +0000 (14:39 -0700)]
frame_size_tests: reduce 'large' size for win32
this test allocates >2GB currently. depending on the order of the test
runs the allocation may fail most regularly with mingw+wine.
Change-Id: Ibee1c18cfbe29a4de6c65075647ec3955d8206c0
Dmitry Kovalev [Fri, 15 Aug 2014 21:25:00 +0000 (14:25 -0700)]
Removing duplicated code from init_config().
Change-Id: I50f4485cfbdaadc3084aa5bc63bf3a2f15a0d903
Tom Finegan [Fri, 15 Aug 2014 21:21:25 +0000 (14:21 -0700)]
Merge "vpxdec.sh: Fix some style nits."
Tom Finegan [Fri, 15 Aug 2014 20:58:58 +0000 (13:58 -0700)]
vpxdec.sh: Fix some style nits.
Change-Id: I960c26dcb0db230e50f923d00f64ded1a39bf783
Yunqing Wang [Fri, 15 Aug 2014 21:10:27 +0000 (14:10 -0700)]
Remove a unused speed feature
Removed disable_split_var_thresh, which is not used anymore.
Change-Id: I50119b150442e1571157433b5effc6aae0dbe0fd
Deb Mukherjee [Fri, 15 Aug 2014 21:04:18 +0000 (14:04 -0700)]
Merge "Removes fileno check to prevent valgrind error"
Tom Finegan [Fri, 15 Aug 2014 20:53:05 +0000 (13:53 -0700)]
Merge "examples.sh: Run all example tests."
Dmitry Kovalev [Fri, 15 Aug 2014 19:52:44 +0000 (12:52 -0700)]
Merge "Cleaning up vp9_encoder.c."
Dmitry Kovalev [Fri, 15 Aug 2014 19:52:16 +0000 (12:52 -0700)]
Merge "vp8cx_set_ref: Flush encoder."
Dmitry Kovalev [Fri, 15 Aug 2014 19:51:56 +0000 (12:51 -0700)]
Merge "Removing active_arnr_{strength, frames} from VP9_COMP."
Tom Finegan [Fri, 15 Aug 2014 18:31:30 +0000 (11:31 -0700)]
examples.sh: Run all example tests.
- Remove vpxdec and vpxenc from the exclude list.
- vpx{dec,enc}.sh: Updates to support finding their executable when
LIBVPX_BIN_PATH is setup for the examples.
- tools_common.sh: New library function, vpx_tool_path(). Provides
support for finding the exectuables in vpx{dec,enc}.sh.
Change-Id: I730f11cceb44646491a7a7ff58603a4a760129ef
Adrian Grange [Fri, 15 Aug 2014 17:41:28 +0000 (10:41 -0700)]
Merge "get_ref_frame: fix test for valid buffer."
Dmitry Kovalev [Thu, 14 Aug 2014 17:28:00 +0000 (10:28 -0700)]
vp8cx_set_ref: Flush encoder.
According to the current API spec we need to call vpx_codec_encode() until
vpx_codec_get_cx_data() returns NULL.
Change-Id: Ide0c531dc0d453df8ec1edb8acb894856d6cc22e
Dmitry Kovalev [Thu, 14 Aug 2014 17:44:08 +0000 (10:44 -0700)]
Cleaning up vp9_encoder.c.
Change-Id: Ib06c59d1adefb841a6ff653619dffb7e23f3318d
Dmitry Kovalev [Fri, 15 Aug 2014 17:22:00 +0000 (10:22 -0700)]
Removing active_arnr_{strength, frames} from VP9_COMP.
Change-Id: I60472b71ca75ee0522ed2611f43e1207d44b66d0
Deb Mukherjee [Thu, 14 Aug 2014 21:59:50 +0000 (14:59 -0700)]
Removes fileno check to prevent valgrind error
Explicitly makes the fileptr null when close source is called
on a temporary file. This avoids a valgrind error.
Change-Id: I9c364290eeb6842fde946dd9bf817814c7178aaa
Marco Paniconi [Fri, 15 Aug 2014 15:51:08 +0000 (08:51 -0700)]
Merge "Add an adaptive denoising mode."
Marco [Fri, 15 Aug 2014 14:57:48 +0000 (07:57 -0700)]
Merge "vp8: Modify to use closest reference in zero_mv bias."
James Zern [Fri, 15 Aug 2014 03:27:12 +0000 (20:27 -0700)]
Merge "vpxenc.sh: use --test-decode=fatal for vp9"
James Zern [Fri, 15 Aug 2014 01:48:34 +0000 (18:48 -0700)]
vpxenc.sh: use --test-decode=fatal for vp9
vp8 is broken:
https://code.google.com/p/webm/issues/detail?id=841
Change-Id: If73afe0e2314279b560ad758cb04b1760dcc3605
James Zern [Fri, 15 Aug 2014 01:53:39 +0000 (18:53 -0700)]
Merge "vp9_copy_reference_dec: check ref frame index before use"
Jingning Han [Fri, 15 Aug 2014 01:50:16 +0000 (18:50 -0700)]
Merge "Remove redundant vp9_init_plane_quantizers call"
James Zern [Fri, 15 Aug 2014 01:42:34 +0000 (18:42 -0700)]
Merge "32 Align Load bug In the sub_pixel_avg_variance the parameter sec was also aligned load and changed to unaligned."
Dmitry Kovalev [Fri, 15 Aug 2014 01:26:35 +0000 (18:26 -0700)]
Merge "Moving framerate from VP9EncoderConfig to VP9_COMP."
Marco Paniconi [Thu, 7 Aug 2014 00:19:29 +0000 (17:19 -0700)]
Add an adaptive denoising mode.
On key frame, will always start with normal denoising mode,
but based on a computed noise metric (normalized mse on source diff)
may switch to aggressive mode (and back down again).
Change-Id: I20330b2dcf3056287be37223302b2cab5fc103eb
Marco [Thu, 14 Aug 2014 16:18:38 +0000 (09:18 -0700)]
vp8: Modify to use closest reference in zero_mv bias.
Modify zero_mv bias condition to include check that "closest" reference is last_frame.
This is needed for temporal layers, where the last_frame is not always the closest reference.
Also, constain zeromv_count to be for last_frame reference.
Change-Id: I7af54a809ebf01ef43b9933c9d4095b6cb189390
Yaowu Xu [Thu, 14 Aug 2014 22:25:34 +0000 (15:25 -0700)]
Merge "Mask out H_PRED and V_PRED for 32x32 blocks"
Yaowu Xu [Thu, 14 Aug 2014 22:25:30 +0000 (15:25 -0700)]
Merge "Set max_intra_bsize to 32x32"
James Zern [Thu, 14 Aug 2014 21:56:08 +0000 (14:56 -0700)]
vp9_copy_reference_dec: check ref frame index before use
use get_ref_frame() to ensure a valid frame is retrieved if one exists
Change-Id: I4b116d928e643ee62a991babd4b974037b6b3830
Adrian Grange [Thu, 14 Aug 2014 21:53:33 +0000 (14:53 -0700)]
Merge "Fix bug 837: realloc mode info buffers on resize"
Jingning Han [Thu, 14 Aug 2014 16:55:31 +0000 (09:55 -0700)]
Remove redundant vp9_init_plane_quantizers call
When aq mode is on, the quantizer will be reset later in the same
function (line 571).
Change-Id: I20635db31261d136d04d5deeb881ad3957078bf1
levytamar82 [Thu, 24 Jul 2014 20:40:21 +0000 (13:40 -0700)]
32 Align Load bug
In the sub_pixel_avg_variance the parameter sec was also aligned load and
changed to unaligned.
Change-Id: I4d4966e0291059ea4d705baed1503dc58444fcb7
Adrian Grange [Thu, 14 Aug 2014 19:42:11 +0000 (12:42 -0700)]
get_ref_frame: fix test for valid buffer.
In the current implementation of the encoder,
frame buffers may come from the wider set of
12 such buffers, and is not restricted to the
8 allowed as reference frames. This is only
an implementation detail and does not affect
the constraint of having a total of 8 reference
buffers overall.
Change-Id: I075f777146c2df49c275d89232933f8127235175
Yaowu Xu [Thu, 14 Aug 2014 00:05:57 +0000 (17:05 -0700)]
Mask out H_PRED and V_PRED for 32x32 blocks
Change-Id: I2847af5062b5fa320629fcabb9fa6b23ba3e5513
Yaowu Xu [Wed, 13 Aug 2014 22:07:16 +0000 (15:07 -0700)]
Set max_intra_bsize to 32x32
At --good and speed 3 or above for resolution less than 720p. This
disables the tests for 64x64 intra prediction modes. Encoding time
reduction is about 1%.
Change-Id: Ib396e3d1417fece416e3f0fee929b128acbb130f
Yaowu Xu [Thu, 14 Aug 2014 16:06:38 +0000 (09:06 -0700)]
Merge "Replace current_video_frame with better alternatives"
Adrian Grange [Tue, 12 Aug 2014 18:24:24 +0000 (11:24 -0700)]
Fix bug 837: realloc mode info buffers on resize
The test to determine if the mode info buffers need
to be resized when the frame size changes was
incorrect, as per bug 837.
By storing the size of the allocated data structure,
a simple test determines whether to allocate more
memory when the frame size changes.
Change-Id: I1544698f2882cf958fc672485614f2f46e9719bd
Jim Bankoski [Thu, 14 Aug 2014 13:22:00 +0000 (06:22 -0700)]
Merge "vpx_codec_internal.h : clean out unused function warning"
Adam Xu [Thu, 14 Aug 2014 02:50:01 +0000 (19:50 -0700)]
Merge "Simplify select_tx_mode()"
James Zern [Thu, 14 Aug 2014 02:39:43 +0000 (19:39 -0700)]
Merge "cq_test: allow test cases to be run out of order"
Jim Bankoski [Thu, 14 Aug 2014 01:09:05 +0000 (18:09 -0700)]
vpx_codec_internal.h : clean out unused function warning
Change-Id: I53659e3ff8ba1b70d89d152e0580ac7a412b89b2
Yaowu Xu [Thu, 14 Aug 2014 00:19:34 +0000 (17:19 -0700)]
Replace current_video_frame with better alternatives
In the encoder, current_video_frame is used in a couple of places to
decide encoding strategy, this commit replaces with more appropriate
variables.
Change-Id: I3d3d8d8e2ea02c489e4639b9d4c446a63e357d29
Jingning Han [Wed, 13 Aug 2014 17:38:21 +0000 (10:38 -0700)]
Allow full coeff probability model and cost update
This commit moves the simplified coefficient probability model
and costing update to speed 4, and turns on chessboard pattern
mode search for sub 720p sequences. The overall coding performance
of speed 3 is improved:
derf 0.889%
stdhd 1.744%
The speed 3 runtime for test sequences are improved:
bus cif at 1000 kbps 9823 ms -> 9642 ms
pedestrian 1080p 2000 kbps 189559 ms -> 183284 ms
Change-Id: Iecbc7496a68f31fd49fb09f8dfd97c028d675a5d
Jingning Han [Tue, 12 Aug 2014 01:02:18 +0000 (18:02 -0700)]
Skip mode search based on reference frame consistency
This commit enables the encoder to skip NEARMV and ZEROMV if the
above and left blocks have identical reference frame, and the
current reference is different from that. It reduces the runtime
of speed 3 for test sequences:
bus cif at 1000 kbps 10064 ms -> 9823 ms
pedestrian 1080p at 2000 kbps 193078 ms -> 189559 ms
The compression performance is changed by
derf -0.085%
stdhd -0.103%
Change-Id: If304f26d42e6412152a84c3dd7b02635c38444f4
Jingning Han [Wed, 13 Aug 2014 21:13:19 +0000 (14:13 -0700)]
Merge "Enable motion field based mode seach skip"
Jingning Han [Tue, 12 Aug 2014 00:48:14 +0000 (17:48 -0700)]
Enable motion field based mode seach skip
This commit allows the encoder to check the above and left neighbor
blocks' reference frames and motion vectors. If they are all
consistent, skip checking the NEARMV and ZEROMV modes. This is
enabled in speed 3. The coding performance is improved:
pedestrian area 1080p at 2000 kbps,
from 74773 b/f, 41.101 dB, 198064 ms
to 74795 b/f, 41.099 dB, 193078 ms
park joy 1080p at 15000 kbps,
from 290727 b/f, 30.640 dB, 609113 ms
to 290558 b/f, 30.630 dB, 592815 ms
Overall compression performance of speed 3 is changed
derf -0.171%
stdhd -0.168%
Change-Id: I8d47dd543a5f90d7a1c583f74035b926b6704b95
Yaowu Xu [Wed, 13 Aug 2014 17:43:43 +0000 (10:43 -0700)]
Simplify select_tx_mode()
The function is called only once, right after all stats counters are
reset to 0. Therefore all the computations have zero effect on return
values. This commmit to removed those effectless code.
Change-Id: I50d27c0802547921fa36c60aa4bd92d76247f595
Jim Bankoski [Wed, 13 Aug 2014 17:54:33 +0000 (10:54 -0700)]
Merge "vpx_internal_error -> fix -Wunused-function issues"
James Zern [Wed, 13 Aug 2014 02:26:49 +0000 (19:26 -0700)]
cq_test: allow test cases to be run out of order
check that bitrates increase with cqlevel at global test case teardown,
rather than after each individual test case. this allows the tests to be
run out of order with --gtest_shuffle.
Change-Id: I9e0d4e6a2d920a1f2fe9aee7b7876a3e7eb5d297
Deb Mukherjee [Wed, 13 Aug 2014 16:55:39 +0000 (09:55 -0700)]
Merge "Initialization to prevent asan failure on google3"
Deb Mukherjee [Wed, 13 Aug 2014 15:41:40 +0000 (08:41 -0700)]
Initialization to prevent asan failure on google3
Reinstates an assignment to prevent an asan failurere on google3.
Not sure why the failure happens. This was removed in a recent patch
https://gerrit.chromium.org/gerrit/#/c/71068/.
Change-Id: Ifd9ccffd4c2164f4de38b21821ffb28bd779b0f3
Jim Bankoski [Wed, 13 Aug 2014 15:40:14 +0000 (08:40 -0700)]
Merge "intra blocks disallowed inadvertently"
Jim Bankoski [Wed, 13 Aug 2014 15:11:22 +0000 (08:11 -0700)]
Merge "Update PATENTS to reflect s/VP8/WebM/g"
Jim Bankoski [Wed, 13 Aug 2014 14:58:01 +0000 (07:58 -0700)]
vpx_internal_error -> fix -Wunused-function issues
Moved to global function to avoid unused function warnings...
Change-Id: I4e9002dcb20748f6d8d84cbbe6ef2de0bd9a8018
Paul Wilkins [Wed, 13 Aug 2014 09:56:19 +0000 (02:56 -0700)]
Merge "Minor Two pass rate control adjustments."
James Zern [Wed, 13 Aug 2014 07:24:31 +0000 (00:24 -0700)]
Merge "decode_api_test: fix type conversion warning"
James Zern [Wed, 13 Aug 2014 06:40:48 +0000 (23:40 -0700)]
Merge "libyuv: update to r1041"
James Zern [Wed, 13 Aug 2014 06:11:38 +0000 (23:11 -0700)]
decode_api_test: fix type conversion warning
size_t -> uint32 in the call to vpx_codec_decode()
Change-Id: Ibf39d3749321c97292b35ac0631fa22211cff800
James Zern [Sun, 10 Aug 2014 23:15:18 +0000 (16:15 -0700)]
libyuv: update to r1041
Change-Id: I38dad398844ee424a7a92a745ab703645018d02b
James Zern [Wed, 13 Aug 2014 05:48:27 +0000 (22:48 -0700)]
Merge "get_ref_frame: check ref_frame_map value"
James Zern [Wed, 13 Aug 2014 04:11:36 +0000 (21:11 -0700)]
Merge "VP8D_GET_FRAME_CORRUPTED: check frame pointer"
James Zern [Wed, 13 Aug 2014 04:11:11 +0000 (21:11 -0700)]
Merge "vpx_codec_decode: check data size"
James Zern [Wed, 13 Aug 2014 03:16:47 +0000 (20:16 -0700)]
Merge "inline vpx functions in headers to avoid unused function warning"
James Zern [Wed, 13 Aug 2014 03:15:14 +0000 (20:15 -0700)]
Merge "fixes several -Wunused-function warnings"
James Zern [Wed, 13 Aug 2014 02:21:20 +0000 (19:21 -0700)]
Merge "Fix a run-time integer overflow"
Deb Mukherjee [Wed, 13 Aug 2014 01:06:21 +0000 (18:06 -0700)]
Merge "Rework y4mwrite test to pass google3 tests"