drm/virtio: fix potential integer overflow on shift of a int

The left shift of unsigned int 32 bit integer constant 1 is evaluated
using 32 bit arithmetic and then assigned to a signed 64 bit integer.
In the case where i is 32 or more this can lead to an overflow. Fix
this by shifting the value 1ULL instead.

Addresses-Coverity: ("Uninitentional integer overflow")
Fixes: 8d6b006e1f51 ("drm/virtio: implement context init: handle VIRTGPU_CONTEXT_PARAM_POLL_RINGS_MASK")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210930101941.16546-1-colin.king@canonical.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

MAINTAINERS: add reviewers for virtio-gpu

Add Gurchetan Singh and me as reviewers for virtio-gpu.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Acked-by: Gurchetan Singh <gurchetansingh@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20211028213446.955338-1-olvaffe@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/bridge: sn65dsi86: ti_sn65dsi86_read_u16() __maybe_unused

When built without CONFIG_PWM there are no references to
ti_sn65dsi86_read_u16(), avoid the W=1 build warning by marking the
function as __maybe_unused.

__maybe_unused is used insted of a #ifdef guard as it looks slighly
cleaner and it avoids issues if in the future other permutations of the
config options would use the function.

Reported-by: kernel test robot <lkp@intel.com>
Fixes: cea86c5bb442 ("drm/bridge: ti-sn65dsi86: Implement the pwm_chip")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211028163548.273736-1-bjorn.andersson@linaro.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>

dma-buf: remove restriction of IOCTL:DMA_BUF_SET_NAME

In this patch(https://patchwork.freedesktop.org/patch/310349),
it add a new IOCTL to support dma-buf user to set debug name.

But it also added a limitation of this IOCTL, it needs the
attachments of dmabuf should be empty, otherwise it will fail.

For the original series, the idea was that allowing name change
mid-use could confuse the users about the dma-buf.
However, the rest of the series also makes sure each dma-buf have a unique
inode(https://patchwork.freedesktop.org/patch/310387/), and any accounting
should probably use that, without relying on the name as much.

So, removing this restriction will let dma-buf userspace users to use it
more comfortably and without any side effect.

Signed-off-by: Guangming Cao <Guangming.Cao@mediatek.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014102551.54983-1-guangming.cao@mediatek.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>

drm/kmb: Enable support for framebuffer console

Enable support for fbcon (framebuffer console).

v2: added missing static clk_enable
v3: removed module parameter, use fbdev_emulation instead. Use
preferred depth of 24 for color depth. (Thomas Z.)

Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211019230719.789958-2-anitha.chrisanthus@intel.com

drm/msm/dsi: Adjust probe order

Switch to the documented order dsi-host vs bridge probe.

Tested-by: Amit Pundir <amit.pundir@linaro.org>
Tested-by: Caleb Connolly <caleb.connolly@linaro.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-22-maxime@cerno.tech

drm/kirin: dsi: Adjust probe order

Without proper care and an agreement between how DSI hosts and devices
drivers register their MIPI-DSI entities and potential components, we can
end up in a situation where the drivers can never probe.

Most drivers were taking evasive maneuvers to try to workaround this,
but not all of them were following the same conventions, resulting in
various incompatibilities between DSI hosts and devices.

Now that we have a sequence agreed upon and documented, let's convert
kirin to it.

Acked-by: John Stultz <john.stultz@linaro.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-21-maxime@cerno.tech

drm/bridge: tc358775: Register and attach our DSI device at probe

In order to avoid any probe ordering issue, the best practice is to move
the secondary MIPI-DSI device registration and attachment to the
MIPI-DSI host at probe time. Let's do this.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-20-maxime@cerno.tech

drm/bridge: tc358775: Switch to devm MIPI-DSI helpers

Let's switch to the new devm MIPI-DSI function to register and attach
our secondary device. This also avoids leaking the device when we detach
the bridge.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-19-maxime@cerno.tech

drm/bridge: sn65dsi86: Register and attach our DSI device at probe

In order to avoid any probe ordering issue, the best practice is to move
the secondary MIPI-DSI device registration and attachment to the
MIPI-DSI host at probe time. Let's do this.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-18-maxime@cerno.tech

drm/bridge: sn65dsi86: Switch to devm MIPI-DSI helpers

Let's switch to the new devm MIPI-DSI function to register and attach
our secondary device. This also avoids leaking the device when we detach
the bridge.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-17-maxime@cerno.tech

drm/bridge: sn65dsi83: Register and attach our DSI device at probe

In order to avoid any probe ordering issue, the best practice is to move
the secondary MIPI-DSI device registration and attachment to the
MIPI-DSI host at probe time. Let's do this.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-16-maxime@cerno.tech

drm/bridge: sn65dsi83: Switch to devm MIPI-DSI helpers

Let's switch to the new devm MIPI-DSI function to register and attach
our secondary device. This also avoids leaking the device when we detach
the bridge but don't remove its driver.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-15-maxime@cerno.tech

drm/bridge: sn65dsi83: Fix bridge removal

Commit 24417d5b0c00 ("drm/bridge: ti-sn65dsi83: Implement .detach
callback") moved the unregistration of the bridge DSI device and bridge
itself to the detach callback.

While this is correct for the DSI device detach and unregistration, the
bridge is added in the driver probe, and should thus be removed as part
of its remove callback.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Marek Vasut <marex@denx.de>
Fixes: 24417d5b0c00 ("drm/bridge: ti-sn65dsi83: Implement .detach callback")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-14-maxime@cerno.tech

drm/bridge: ps8640: Register and attach our DSI device at probe

In order to avoid any probe ordering issue, the best practice is to move
the secondary MIPI-DSI device registration and attachment to the
MIPI-DSI host at probe time. Let's do this.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-13-maxime@cerno.tech

drm/bridge: ps8640: Switch to devm MIPI-DSI helpers

Let's switch to the new devm MIPI-DSI function to register and attach
our secondary device. This also avoids leaking the device on removal.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-12-maxime@cerno.tech

drm/bridge: lt9611uxc: Register and attach our DSI device at probe

In order to avoid any probe ordering issue, the best practice is to move
the secondary MIPI-DSI device registration and attachment to the
MIPI-DSI host at probe time. Let's do this.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-11-maxime@cerno.tech

drm/bridge: lt9611uxc: Switch to devm MIPI-DSI helpers

Let's switch to the new devm MIPI-DSI function to register and attach
our secondary device.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-10-maxime@cerno.tech

drm/bridge: lt9611: Register and attach our DSI device at probe

In order to avoid any probe ordering issue, the best practice is to move
the secondary MIPI-DSI device registration and attachment to the
MIPI-DSI host at probe time. Let's do this.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-9-maxime@cerno.tech

drm/bridge: lt9611: Switch to devm MIPI-DSI helpers

Let's switch to the new devm MIPI-DSI function to register and attach
our secondary device.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-8-maxime@cerno.tech

drm/bridge: lt8912b: Register and attach our DSI device at probe

In order to avoid any probe ordering issue, the best practice is to move
the secondary MIPI-DSI device registration and attachment to the
MIPI-DSI host at probe time. Let's do this.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-7-maxime@cerno.tech

drm/bridge: lt8912b: Switch to devm MIPI-DSI helpers

Let's switch to the new devm MIPI-DSI function to register and attach
our secondary device.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-6-maxime@cerno.tech

drm/bridge: anx7625: Register and attach our DSI device at probe

In order to avoid any probe ordering issue, the best practice is to move
the secondary MIPI-DSI device registration and attachment to the
MIPI-DSI host at probe time. Let's do this.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-5-maxime@cerno.tech

drm/bridge: anx7625: Switch to devm MIPI-DSI helpers

Let's switch to the new devm MIPI-DSI function to register and attach
our secondary device.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-4-maxime@cerno.tech

drm/bridge: adv7511: Register and attach our DSI device at probe

In order to avoid any probe ordering issue, the best practice is to move
the secondary MIPI-DSI device registration and attachment to the
MIPI-DSI host at probe time. Let's do this.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-3-maxime@cerno.tech

drm/bridge: adv7533: Switch to devm MIPI-DSI helpers

Let's switch to the new devm MIPI-DSI function to register and attach
our secondary device. This also avoids leaking the device when we detach
the bridge.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-2-maxime@cerno.tech

drm: Link CMA framebuffer helpers into KMS helper library

Linking the CMA framebuffer helpers into a CMA helper library in
commit 4b2b5e142ff4 ("drm: Move GEM memory managers into modules")
results in linker errors:

  arm-linux-gnueabihf-ld: drivers/gpu/drm/drm_fb_cma_helper.o: \
  in function `drm_fb_cma_get_gem_obj': \
  drivers/gpu/drm/drm_fb_cma_helper.c:46: undefined reference \
  to `drm_gem_fb_get_obj'
  arm-linux-gnueabihf-ld: drivers/gpu/drm/drm_fb_cma_helper.c:46: \
  undefined reference to `drm_gem_fb_get_obj'
  arm-linux-gnueabihf-ld: drivers/gpu/drm/drm_fb_cma_helper.c:46: \
  undefined reference to `drm_gem_fb_get_obj'
  arm-linux-gnueabihf-ld: drivers/gpu/drm/drm_fb_cma_helper.o: in \
  function `drm_fb_cma_sync_non_coherent': \
  drivers/gpu/drm/drm_fb_cma_helper.c:133: undefined reference \
  to `drm_atomic_helper_damage_iter_init'
  arm-linux-gnueabihf-ld: drivers/gpu/drm/drm_fb_cma_helper.c:135: \
  undefined reference to `drm_atomic_helper_damage_iter_next'

Link the CMA framebuffer helpers into the KMS helper library to
fix the problem.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 4b2b5e142ff4 ("drm: Move GEM memory managers into modules")
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20211026175700.27664-1-tzimmermann@suse.de

drm/bridge: ti-sn65dsi86: Implement the pwm_chip

The SN65DSI86 provides the ability to supply a PWM signal on GPIO 4,
with the primary purpose of controlling the backlight of the attached
panel. Add an implementation that exposes this using the standard PWM
framework, to allow e.g. pwm-backlight to expose this to the user.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025170925.3096444-3-bjorn.andersson@linaro.org

drm/bridge: ti-sn65dsi86: Use regmap_bulk_write API

The multi-register u16 write operation can use regmap_bulk_write()
instead of two separate regmap_write() calls.

It's uncertain if this has any effect on the actual updates of the
underlying registers, but this at least gives the hardware the
opportunity and saves us one transation on the bus.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025170925.3096444-2-bjorn.andersson@linaro.org

pwm: Introduce single-PWM of_xlate function

The existing pxa driver and the upcoming addition of PWM support in the
TI sn565dsi86 DSI/eDP bridge driver both has a single PWM channel and
thereby a need for a of_xlate function with the period as its single
argument.

Introduce a common helper function in the core that can be used as
of_xlate by such drivers and migrate the pxa driver to use this.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Steev Klimaszewski <steev@kali.org>
Tested-By: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025170925.3096444-1-bjorn.andersson@linaro.org

drm/etnaviv: replace dma_resv_get_excl_unlocked

We certainly hold the reservation lock here, no need for the RCU dance.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025080532.177424-3-christian.koenig@amd.com

drm/etnaviv: use new iterator in etnaviv_gem_describe

Instead of hand rolling the logic.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025080532.177424-2-christian.koenig@amd.com

dma-buf: st: fix error handling in test_get_fences()

The new driver incorrectly unwinds after errors, as clang points out:

drivers/dma-buf/st-dma-resv.c:295:7: error: variable 'i' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
                if (r) {
                    ^
drivers/dma-buf/st-dma-resv.c:336:9: note: uninitialized use occurs here
        while (i--)
               ^
drivers/dma-buf/st-dma-resv.c:295:3: note: remove the 'if' if its condition is always false
                if (r) {
                ^~~~~~~~
drivers/dma-buf/st-dma-resv.c:288:6: error: variable 'i' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
        if (r) {
            ^
drivers/dma-buf/st-dma-resv.c:336:9: note: uninitialized use occurs here
        while (i--)
               ^
drivers/dma-buf/st-dma-resv.c:288:2: note: remove the 'if' if its condition is always false
        if (r) {
        ^~~~~~~~
drivers/dma-buf/st-dma-resv.c:280:10: note: initialize the variable 'i' to silence this warning
        int r, i;
                ^
                 = 0

Skip cleaning up the bits that have not been allocated at this point.

Fixes: 1d51775cd3f5 ("dma-buf: add dma_resv selftest v4")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211026083448.3471055-1-arnd@kernel.org
Signed-off-by: Christian König <christian.koenig@amd.com>

drm/panel: novatek-nt35950: remove unneeded semicolon

Eliminate the following coccicheck warning:
./drivers/gpu/drm/panel/panel-novatek-nt35950.c:639:2-3: Unneeded
semicolon

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Fixes: 623a3531e9cf ("drm/panel: Add driver for Novatek NT35950 DSI DriverIC panels")
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1634629046-116842-1-git-send-email-yang.lee@linux.alibaba.com

drm/panel: make sharp_ls055d1sx04 static

This symbol is not used outside of panel-novatek-nt35950.c, so marks it
static.

Fixes the following sparse warning:

drivers/gpu/drm/panel/panel-novatek-nt35950.c:671:33: warning: symbol
'sharp_ls055d1sx04' was not declared. Should it be static?

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Fixes: 623a3531e9cf ("drm/panel: Add driver for Novatek NT35950 DSI DriverIC panels")
Signed-off-by: chongjiapeng <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1634640029-12335-1-git-send-email-jiapeng.chong@linux.alibaba.com

drm/panel: ilitek-ili9881c: Read panel orientation

The panel orientation needs to parsed from a device-tree and assigned to
the panel's connector in order to make orientation property available to
userspace. That's what this patch does for ILI9881C based panels.

Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020153432.383845-4-john@metanate.com

dt-bindings: ili9881c: add rotation property

Allow the standard rotation property from panel-common for ILI9881C
based panels.

Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020153432.383845-3-john@metanate.com

dt-bindings: ili9881c: add missing panel-common inheritance

The properties below refer to items in panel-common.yaml, which means
that needs to be referenced in the schema.

Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020153432.383845-2-john@metanate.com

drm/vc4: crtc: Make sure the HDMI controller is powered when disabling

Since commit 875a4d536842 ("drm/vc4: drv: Disable the CRTC at boot
time"), during the initial setup of the driver we call into the VC4 HDMI
controller hooks to make sure the controller is properly disabled.

However, we were never making sure that the device was properly powered
while doing so. This never resulted in any (reported) issue in practice,
but since the introduction of commit 4209f03fcb8e ("drm/vc4: hdmi: Warn
if we access the controller while disabled") we get a loud complaint
when we do that kind of access.

Let's make sure we have the HDMI controller properly powered while
disabling it.

Fixes: 875a4d536842 ("drm/vc4: drv: Disable the CRTC at boot time")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210923185013.826679-1-maxime@cerno.tech

drm/vc4: hdmi: Warn if we access the controller while disabled

We've had many silent hangs where the kernel would look like it just
stalled due to the access to one of the HDMI registers while the
controller was disabled.

Add a warning if we're about to do that so that it's at least not silent
anymore.

Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210819135931.895976-7-maxime@cerno.tech

drm/vc4: hdmi: Make sure the device is powered with CEC

Similarly to what we encountered with the detect hook with DRM, nothing
actually prevents any of the CEC callback from being run while the HDMI
output is disabled.

However, this is an issue since any register access to the controller
when it's powered down will result in a silent hang.

Let's make sure we run the runtime_pm hooks when the CEC adapter is
opened and closed by the userspace to avoid that issue.

Fixes: 15b4511a4af6 ("drm/vc4: add HDMI CEC support")
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210819135931.895976-6-maxime@cerno.tech

drm/vc4: hdmi: Split the CEC disable / enable functions in two

In order to ease further additions to the CEC enable and disable, let's
split the function into two functions, one to enable and the other to
disable.

Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210819135931.895976-5-maxime@cerno.tech

drm/vc4: hdmi: Rework the pre_crtc_configure error handling

Since our pre_crtc_configure hook returned void, we didn't implement a
goto-based error path handling, leading to errors like failing to put
back the device in pm_runtime in all the error paths, but also failing
to disable the pixel clock if clk_set_min_rate on the HSM clock fails.

Move to a goto-based implementation to have an easier consitency.

Fixes: 4f6e3d66ac52 ("drm/vc4: Add runtime PM support to the HDMI encoder driver")
Link: https://patchwork.freedesktop.org/patch/msgid/20210819135931.895976-4-maxime@cerno.tech
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: hdmi: Make sure the controller is powered up during bind

In the bind hook, we actually need the device to have the HSM clock
running during the final part of the display initialisation where we
reset the controller and initialise the CEC component.

Failing to do so will result in a complete, silent, hang of the CPU.

Fixes: 411efa18e4b0 ("drm/vc4: hdmi: Move the HSM clock enable to runtime_pm")
Link: https://patchwork.freedesktop.org/patch/msgid/20210819135931.895976-3-maxime@cerno.tech
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: hdmi: Make sure the controller is powered in detect

If the HPD GPIO is not available and drm_probe_ddc fails, we end up
reading the HDMI_HOTPLUG register, but the controller might be powered
off resulting in a CPU hang. Make sure we have the power domain and the
HSM clock powered during the detect cycle to prevent the hang from
happening.

Fixes: 4f6e3d66ac52 ("drm/vc4: Add runtime PM support to the HDMI encoder driver")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Michael Stapelberg <michael@stapelberg.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922125419.4125779-6-maxime@cerno.tech

drm/vc4: hdmi: Move the HSM clock enable to runtime_pm

In order to access the HDMI controller, we need to make sure the HSM
clock is enabled. If we were to access it with the clock disabled, the
CPU would completely hang, resulting in an hard crash.

Since we have different code path that would require it, let's move that
clock enable / disable to runtime_pm that will take care of the
reference counting for us.

Since we also want to change the HSM clock rate and it's only valid
while the clock is disabled, we need to move the clk_set_min_rate() call
on the HSM clock above pm_runtime_get_and_sync().

Fixes: 4f6e3d66ac52 ("drm/vc4: Add runtime PM support to the HDMI encoder driver")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Michael Stapelberg <michael@stapelberg.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922125419.4125779-5-maxime@cerno.tech
Link: https://lore.kernel.org/linux-arm-kernel/20210924152334.1342630-1-maxime@cerno.tech/

drm/vc4: hdmi: Set a default HSM rate

When the firmware doesn't setup the HSM rate (such as when booting
without an HDMI cable plugged in), its rate is 0 and thus any register
access results in a CPU stall, even though HSM is enabled.

Let's enforce a minimum rate at boot to avoid this issue.

Fixes: 4f6e3d66ac52 ("drm/vc4: Add runtime PM support to the HDMI encoder driver")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Michael Stapelberg <michael@stapelberg.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922125419.4125779-4-maxime@cerno.tech

clk: bcm-2835: Remove rounding up the dividers

The driver, once it found a divider, tries to round it up by increasing
the least significant bit of the fractional part by one when the
round_up argument is set and there's a remainder.

However, since it increases the divider it will actually reduce the
clock rate below what we were asking for, leading to issues with
clk_set_min_rate() that will complain that our rounded clock rate is
below the minimum of the rate.

Since the dividers are fairly precise already, let's remove that part so
that we can have clk_set_min_rate() working.

This is effectively a revert of 9c95b32ca093 ("clk: bcm2835: add a round
up ability to the clock divisor").

Fixes: 9c95b32ca093 ("clk: bcm2835: add a round up ability to the clock divisor")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenz@kernel.org> # boot and basic functionality
Tested-by: Michael Stapelberg <michael@stapelberg.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922125419.4125779-3-maxime@cerno.tech

clk: bcm-2835: Pick the closest clock rate

The driver currently tries to pick the closest rate that is lower than
the rate being requested.

This causes an issue with clk_set_min_rate() since it actively checks
for the rounded rate to be above the minimum that was just set.

Let's change the logic a bit to pick the closest rate to the requested
rate, no matter if it's actually higher or lower.

Fixes: 6d18b8adbe67 ("clk: bcm2835: Support for clock parent selection")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenz@kernel.org> # boot and basic functionality
Tested-by: Michael Stapelberg <michael@stapelberg.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922125419.4125779-2-maxime@cerno.tech

Merge drm/drm-next into drm-misc-next

drm-misc-next hasn't been updated in a while and I need a post -rc2
state to merge some vc4 patches.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm: use new iterator in drm_gem_plane_helper_prepare_fb v3

Makes the handling a bit more complex, but avoids the use of
dma_resv_get_excl_unlocked().

v2: improve coding and documentation
v3: adjust the TODO comment as suggested by Daniel

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005113742.1101-25-christian.koenig@amd.com

drm: Move GEM memory managers into modules

DRM core uses the GEM base object to access GEM functionality. It does
not depend on individual implementations. Move the code into modules.

Also move the CMA framebuffer helpers into the CMA's module, as they're
not usable without CMA.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020131941.15367-4-tzimmermann@suse.de

drm: Link several object files into drm_kms_helper.ko

Several core DRM functions are not used by the DRM core. Link the
object files into the KMS helper library.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020131941.15367-3-tzimmermann@suse.de

drm: Build drm_irq.o only if CONFIG_DRM_LEGACY has been set

All code in drm_irq.o is for legacy UMs drivers. Only build and link
the file if CONFIG_DRM_LEGACY has been enabled.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020131941.15367-2-tzimmermann@suse.de

drm/amdgpu: use new iterator in amdgpu_ttm_bo_eviction_valuable

Simplifying the code a bit.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005113742.1101-13-christian.koenig@amd.com

drm/amdgpu: use the new iterator in amdgpu_sync_resv

Simplifying the code a bit.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005113742.1101-12-christian.koenig@amd.com

dma-buf: add dma_resv selftest v4

Just exercising a very minor subset of the functionality, but already
proven useful.

v2: add missing locking
v3: some more cleanup and consolidation, add unlocked test as well
v4: add a dma_resv_get_fences selftest

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> (v3)
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v3)
Link: https://patchwork.freedesktop.org/patch/msgid/20211005113742.1101-4-christian.koenig@amd.com

drm/nouveau: use the new iterator in nouveau_fence_sync

Simplifying the code a bit.

The new implementation unifies the handling between drivers and so
results in waiting for all shared fernces in all cases.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005113742.1101-26-christian.koenig@amd.com

dma-buf: fix kerneldoc for renamed members

Those members where renamed, update the kerneldoc as well.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211021141945.84023-1-christian.koenig@amd.com

Merge tag 'drm-intel-gt-next-2021-10-21' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

UAPI Changes:

- Expose multi-LRC submission interface

  Similar to the bonded submission interface but simplified.
  Comes with GuC only implementation for now. See kerneldoc
  for more details.

  Userspace changes: https://github.com/intel/media-driver/pull/1252

- Expose logical engine instance to user

  Needed by the multi-LRC submission interface for GuC

  Userspace changes: https://github.com/intel/media-driver/pull/1252

Driver Changes:

- Fix blank screen booting crashes when CONFIG_CC_OPTIMIZE_FOR_SIZE=y (Hugh)
- Add support for multi-LRC submission in the GuC backend (Matt B)
- Add extra cache flushing before making pages userspace visible (Matt A, Thomas)
- Mark internal GPU object pages dirty so they will be flushed properly (Matt A)

- Move remaining debugfs interfaces i915_wedged/i915_forcewake_user into gt (Andi)
- Replace the unconditional clflushes with drm_clflush_virt_range() (Ville)
- Remove IS_ACTIVE macro completely (Lucas)
- Improve kerneldocs for cache_dirty (Matt A)

- Add missing includes (Lucas)
- Selftest improvements (Matt R, Ran, Matt A)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YXFmLKoq8Fg9JxSd@jlahtine-mobl.ger.corp.intel.com

Merge tag 'drm-intel-next-2021-10-15' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

UAPI Changes:

- No Functional change, but a clarification around I915_TILING values (Matt).

Driver Changes:

- Changes around async flip VT-d w/a (Ville)
- Delete bogus NULL check in intel_ddi_encoder_destroy (Dan)
- DP link training improvements and DP per-lane driver settings (Ville)
- Free the returned object of acpi_evaluate_dsm (Zenghui)
- Fixes and improvements around DP's UHBR and MST (Jani)
- refactor plane config + pin out (Dave)
- remove unused include in intel_dsi_vbt.c (Lucas)
- some code clean up (Lucas, Jani)
- gracefully disable dual eDP (Jani)
- Remove memory frequency calculation (Jose)
- Fix oops on platforms w/o hpd support (Ville)
- Clean up PXP Kconfig info (Rodrigo)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YWnMORrixyw90O3/@intel.com

drm/rockchip: Implement mmap as GEM object function

Moving the driver-specific mmap code into a GEM object function allows
for using DRM helpers for various mmap callbacks.

The respective rockchip functions are being removed. The file_operations
structure fops is now being created by the helper macro
DEFINE_DRM_GEM_FOPS().

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
[On rk3288 (pinky), rk3399 (gru-kevin, puma) and rk3328 (rock64)]
Tested-by: Heiko Stuebner <heiko@sntech.de>
[On RK3188/RK3066 (without iommu)]
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210624095502.8945-1-tzimmermann@suse.de

drm/sun4i: virtual CMA addresses are not needed

Driver never uses virtual address of DRM CMA buffers. Switch to CMA
helpers which don't deal with virtual mapping.

This was actually already the case before commit ad408c766cef
("drm/sun4i: Use DRM_GEM_CMA_VMAP_DRIVER_OPS for GEM operations"),
but only convenient macro at the time used helpers with virtual
mapping.

Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211019181028.4190737-1-jernej.skrabec@gmail.com

drm/gma500: Remove generic DRM drivers in probe function

Gma500 currently removes generic fbdev drivers, but ignores
generic DRM drivers. Use aperture helpers to remove all generic
graphics drivers before loading gma500. Makes gma500 compatible
with simpledrm.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211019080942.24356-1-tzimmermann@suse.de

drm/i915/selftests: mark up hugepages object with start_cpu_write

Just like we do for internal objects. Also just use
i915_gem_object_set_cache_coherency() here. No need for over-flushing on
LLC platforms.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018174508.2137279-9-matthew.auld@intel.com

drm/i915: mark up internal objects with start_cpu_write

While the pages can't be swapped out, they can be discarded by the shrinker.
Normally such objects are marked with __I915_MADV_PURGED, which can't be
unset, and therefore requires a new object. For kernel internal objects
this is not true, since the madv hint is reset for our special volatile
objects, such that we can re-acquire new pages, if so desired, without
needing a new object. As a result we should probably be paranoid here
and put the object back into the CPU domain when discarding the pages,
and also correctly set cache_dirty, if required.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018174508.2137279-8-matthew.auld@intel.com

drm/i915: expand on the kernel-doc for cache_dirty

Add some details around non-LLC platforms and cflushing, when dealing
with the flush-on-acquire, which is potentially security sensitive.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018174508.2137279-7-matthew.auld@intel.com

drm/i915/shmem: ensure flush during swap-in on non-LLC

On non-LLC platforms, force the flush-on-acquire if this is ever
swapped-in. Our async flush path is not trust worthy enough yet(and
happens in the wrong order), and with some tricks it's conceivable for
userspace to change the cache-level to I915_CACHE_NONE after the pages
are swapped-in, and since execbuf binds the object before doing the
async flush, there is a potential race window.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018174508.2137279-6-matthew.auld@intel.com

drm/i915/userptr: add paranoid flush-on-acquire

Even though userptr objects are always coherent with the GPU, with no
way for userspace to change this with the set_caching ioctl, even on
non-LLC platforms, there is still the 'Bypass LCC' mocs setting, which
might permit reading the contents of main memory directly.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018174508.2137279-5-matthew.auld@intel.com

drm/i915/dmabuf: add paranoid flush-on-acquire

As pointed out by Thomas, we likely need to flush the pages here if the
GPU can read the page contents directly from main memory. Underneath we
don't know what the sg_table is pointing to, so just add a
wbinvd_on_all_cpus() here, for now.

Reported-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018174508.2137279-4-matthew.auld@intel.com

drm/i915: extract bypass-llc check into helper

It looks like we will need this in some more places, so extract as a
helper.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018174508.2137279-3-matthew.auld@intel.com

drm/i915: mark userptr objects as ALLOC_USER

These are userspace objects, so mark them as such. In a later patch it's
useful to determine how paranoid we need to be when managing cache
flushes. In theory no functional changes.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018174508.2137279-2-matthew.auld@intel.com

drm/i915: mark dmabuf objects as ALLOC_USER

These are userspace objects, so mark them as such. In a later patch it's
useful to determine how paranoid we need to be when managing cache
flushes. In theory no functional changes.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018174508.2137279-1-matthew.auld@intel.com

drm/radeon: use new iterator in radeon_sync_resv

Simplifying the code a bit.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005113742.1101-16-christian.koenig@amd.com

drm/msm: use new iterator in msm_gem_describe

Simplifying the code a bit. Also drop the RCU read side lock since the
object is locked anyway.

Untested since I can't get the driver to compile on !ARM.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005113742.1101-15-christian.koenig@amd.com

drm/amdgpu: use new iterator in amdgpu_vm_prt_fini

No need to actually allocate an array of fences here.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005113742.1101-14-christian.koenig@amd.com

drm/i915/selftests: remove duplicate include in mock_region.c

'drm/ttm/ttm_placement.h' included in
'drivers/gpu/drm/i915/selftests/mock_region.c' is duplicated.
It is also included on the 9 line.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Ran Jianping <ran.jianping@zte.com.cn>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211019090205.1003458-1-ran.jianping@zte.com.cn

Merge tag 'topic/drm-dp-training-delay-helpers-2021-10-19' of git://anongit.freedesktop.org/drm/drm-intel into drm-misc-next

Core Changes:
- drm dp helpers for figuring out link training delays

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/878ryps5b6.fsf@intel.com

drm/scheduler: fix drm_sched_job_add_implicit_dependencies

Trivial fix since we now need to grab a reference to the fence we have
added. Previously the dma_resv function where doing that for us.

Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: 9c2ba265352a ("drm/scheduler: use new iterator in drm_sched_job_add_implicit_dependencies v2")
Link: https://patchwork.freedesktop.org/patch/msgid/20211019112706.27769-1-christian.koenig@amd.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reported-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
References: https://lore.kernel.org/dri-devel/2023306.UmlnhvANQh@archbook/
Tested-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>

drm/locking: fix __stack_depot_* name conflict

Commit cd06ab2fd48f ("drm/locking: add backtrace for locking contended
locks without backoff") added functions named __stack_depot_* in drm
which conflict with stack depot. Rename to __drm_stack_depot_*.

v2 by Jani:
- Also rename __stack_depot_print

References: https://lore.kernel.org/r/20211015202648.258445ef@canb.auug.org.au
Fixes: cd06ab2fd48f ("drm/locking: add backtrace for locking contended locks without backoff")
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018085113.27033-1-jani.nikula@intel.com

drm/bridge: tc358768: Correct BTACNTRL1 programming

TXTAGOCNT and RXTASURECNT bitfields of BTACNTRL1 register are swapped in
the code, correct them. Driver doesn't implement low power mode for now,
so this change doesn't make a practical difference yet.

Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # Asus TF700T
Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> #TF700T
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211002233447.1105-6-digetx@gmail.com

drm/bridge: tc358768: Disable non-continuous clock mode

Non-continuous clock mode doesn't work because driver doesn't support it
properly. The bridge driver programs wrong bitfields that are required by
the non-continuous mode (BTACNTRL1 register bitfields are swapped in the
code), but fixing them doesn't help.

Display panel of ASUS Transformer TF700T tablet supports non-continuous
mode and display doesn't work at all using that mode. There are no
device-trees that are actively using this DSI bridge in upstream yet,
so clearly the broken mode wasn't ever tested properly. It's a bit too
difficult to get LP mode working, hence let's disable the offending mode
for now and fall back to continuous mode.

Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # Asus TF700T
Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> #TF700T
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211002233447.1105-5-digetx@gmail.com

drm/bridge: tc358768: Calculate video start delay

Calculate video start delay based on the display timing instead
of hardcoding it to a default value. This fixes "trembling" display
output on Asus Transformer TF700T which uses Panasonic VVX10F004B00
display panel.

Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # Asus TF700T
Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> #TF700T
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211002233447.1105-4-digetx@gmail.com

drm/bridge: tc358768: Support pulse mode

Support pulse-mode synchronization which is supported and used by simple
DSI panels like Panasonic VVX10F004B00.

Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # Asus TF700T
Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> #TF700T
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211002233447.1105-3-digetx@gmail.com

drm/bridge: tc358768: Enable reference clock

The driver assumes that reference clock is always-enabled, but this is
hardware-dependent and not true for ASUS Transformer TF700T. Make driver
enable / disable the reference clock.

Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # Asus TF700T
Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> #TF700T
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211002233447.1105-2-digetx@gmail.com

drm/gma500: Rename struct gtt_range to struct psb_gem_object

struct gtt_range represents a GEM object. Rename the structure to struct
psb_gem_object and update all users. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015084053.13708-11-tzimmermann@suse.de

drm/gma500: Rewrite GTT page insert/remove without struct gtt_range

struct gtt_range represents a GEM object and should not be used for GTT
setup. Change psb_gtt_insert() and psb_gtt_remove() to receive all
necessary parameters from their caller. This also eliminates possible
failure from psb_gtt_insert().

There's one exception in psb_gtt_restore(), which requires an upcast
from struct resource to struct gtt_range when restoring the GTT after
hibernation. A possible solution would track the GEM objects that need
restoration separately from the GTT resource.

Rename the functions to psb_gtt_insert_pages() and psb_gtt_remove_pages()
to reflect their similarity to MMU interfaces.

v3:
* restore the comments about locking rules (Patrik)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015084053.13708-10-tzimmermann@suse.de

drm/gma500: Set page-caching flags in GEM pin/unpin

Caching of the GEM object's backing pages are unrelated to GTT
management. Move the respective calls from GTT code to GEM code.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015084053.13708-9-tzimmermann@suse.de

drm/gma500: Inline psb_gtt_{alloc,free}_range() into rsp callers

psb_gtt_alloc_range() allocates struct gtt_range, create the GTT resource
and performs some half-baked initialization. Inline the function into its
only caller psb_gem_create(). For creating the GTT resource, introduce a
new helper, psb_gtt_alloc_resource() that hides the details of the GTT.

For psb_gtt_free_range(), inline the function into its only caller
psb_gem_free_object(). While at it, remove the explicit invocation of
drm_gem_free_mmap_offset(). The mmap offset is already released by
drm_gem_object_release().

v3:
* replace offset[static 1] with pointer notation (Patrik)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015084053.13708-8-tzimmermann@suse.de

drm/gma500: Inline psb_gtt_attach_pages() and psb_gtt_detach_pages()

psb_gtt_attach_pages() are not GTT functions but deal with the GEM
object's SHMEM pages. The only callers of psb_gtt_attach_pages() and
psb_gtt_detach_pages() are the GEM pin helpers. Inline the calls and
cleanup the resulting code.

v2:
* unlock gtt_mutex in pin-error handling (Patrik)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015084053.13708-7-tzimmermann@suse.de

drm/gma500: Rename psb_gtt_{pin,unpin}() to psb_gem_{pin,unpin}()

Rename psb_gtt_pin() to psb_gem_pin() to reflect the semantics of the
function. Same for psb_gtt_unpin(). No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015084053.13708-6-tzimmermann@suse.de

drm/gma500: Allocate GTT ranges in stolen memory with psb_gem_create()

Support private objects for stolen memory in psb_gem_create() and
convert users to psb_gem_create(). For stolen memory, psb_gem_create()
now initializes the GEM object via drm_gem_private_object_init().

In the fbdev setup, replace the open-coded initialization of struct
gtt_range with a call to psb_gem_create(). Use drm_gem_object_put()
for release.

In the cursor setup, use psb_gem_create() and get a real GEM object.
Previously the allocated instance of struct gtt_range was only partially
initialized. Release the cursor GEM object in gma_crtc_destroy(). The
release was missing from the original code.

With the conversion of all callers to psb_gem_create(), the extern
declarations of psb_gtt_alloc_range, psb_gtt_free_range and
psb_gem_object_func are not required any longer. Declare them as
static.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015084053.13708-5-tzimmermann@suse.de

drm/gma500: Reimplement psb_gem_create()

Implement psb_gem_create() for general use. Create the GEM handle in
psb_gem_create_dumb(). Allows to use psb_gem_create() for creating all
of the GEM objects.

While at it, clean-up drm_gem_dumb_create() to make it more readable.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015084053.13708-4-tzimmermann@suse.de

drm/gma500: Use to_gtt_range() everywhere

Convert upcasts from struct drm_gem_object to struct gtt_range to
to_gtt_range(). Some places used container_of() directly.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015084053.13708-3-tzimmermann@suse.de

drm/gma500: Move helpers for struct gtt_range from gtt.c to gem.c

Allocation and pinning helpers for struct gtt_range are GEM functions,
so move them to gem.c. No functional changes.

v2:
* keep docs for psb_gtt_{attach,detach}_pages() (Patrik)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015084053.13708-2-tzimmermann@suse.de

drm/dp: reuse the 8b/10b link training delay helpers

Reuse the 8b/10b link training delay helpers. Functionally this skips
the check for invalid values for DPCD 1.4 and later at clock recovery
delay (as it's a fixed delay and bypasses the rd_interval) but the same
value will be checked and invalid values reported at channel
equalization.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014150059.28957-2-jani.nikula@intel.com

drm/dp: add helpers to read link training delays

The link training delays are different and/or available in different
DPCD offsets depending on:

- Clock recovery vs. channel equalization
- DPRX vs. LTTPR
- 128b/132b vs. 8b/10b
- DPCD 1.4+ vs. earlier

Add helpers to get the correct delays in us, reading DPCD if
necessary. This is more straightforward than trying to retrofit the
existing helpers to take 128b/132b into account.

Having to pass in the DPCD receiver cap field seems unavoidable, because
reading it involves checking the revision and reading extended receiver
cap. So unfortunately the interface is mixed cached and read as needed.

v2: Remove delay_us < 0 check and the whole local var (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014150059.28957-1-jani.nikula@intel.com

dma-buf: Update obsoluted comments on dma_buf_vmap/vunmap()

A comment for the dma_buf_vmap/vunmap() is not catching up a
corresponding implementation.

Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
Link: https://patchwork.freedesktop.org/patch/msgid/20211008112009.118996-1-mie@igel.co.jp
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>

drm/i915: Catch yet another unconditioal clflush

Replace the unconditional clflush() with drm_clflush_virt_range()
which does the wbinvd() fallback when clflush is not available.

This time no justification is given for the clflush in the
offending commit.

Cc: stable@vger.kernel.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Fixes: 2c8ab3339e39 ("drm/i915: Pin timeline map after first timeline pin, v4.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014090941.12159-4-ville.syrjala@linux.intel.com
Reviewed-by: Dave Airlie <airlied@redhat.com>

drm/i915: Convert unconditional clflush to drm_clflush_virt_range()

This one is apparently a "clflush for good measure", so bit more
justification (if you can call it that) than some of the others.
Convert to drm_clflush_virt_range() again so that machines without
clflush will survive the ordeal.

Cc: stable@vger.kernel.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@intel.com> #v1
Fixes: 12ca695d2c1e ("drm/i915: Do not share hwsp across contexts any more, v8.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014090941.12159-3-ville.syrjala@linux.intel.com
Reviewed-by: Dave Airlie <airlied@redhat.com>