review.tizen.org Git - platform/kernel/linux-starfive.git/log

apparmor: fix wrong buffer allocation in aa_new_mount

Fix the following trace caused by the dev_path buffer not being
allocated.

[  641.044262] AppArmor WARN match_mnt: ((devpath && !devbuffer)):
[  641.044284] WARNING: CPU: 1 PID: 30709 at ../security/apparmor/mount.c:385 match_mnt+0x133/0x180
[  641.044286] Modules linked in: snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_hda_codec snd_hda_core qxl ttm snd_hwdep snd_pcm drm_kms_helper snd_seq_midi snd_seq_midi_event drm snd_rawmidi crct10dif_pclmul crc32_pclmul ghash_clmulni_intel iptable_mangle aesni_intel aes_x86_64 xt_tcpudp crypto_simd snd_seq cryptd bridge stp llc iptable_filter glue_helper snd_seq_device snd_timer joydev input_leds snd serio_raw fb_sys_fops 9pnet_virtio 9pnet syscopyarea sysfillrect soundcore sysimgblt qemu_fw_cfg mac_hid sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 8139too psmouse 8139cp i2c_piix4 pata_acpi mii floppy
[  641.044318] CPU: 1 PID: 30709 Comm: mount Tainted: G      D W         5.1.0-rc4+ #223
[  641.044320] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[  641.044323] RIP: 0010:match_mnt+0x133/0x180
[  641.044325] Code: 41 5d 41 5e 41 5f c3 48 8b 4c 24 18 eb b1 48 c7 c6 08 84 26 83 48 c7 c7 f0 56 54 83 4c 89 54 24 08 48 89 14 24 e8 7d d3 bb ff <0f> 0b 4c 8b 54 24 08 48 8b 14 24 e9 25 ff ff ff 48 c7 c6 08 84 26
[  641.044327] RSP: 0018:ffffa9b34ac97d08 EFLAGS: 00010282
[  641.044329] RAX: 0000000000000000 RBX: ffff9a86725a8558 RCX: 0000000000000000
[  641.044331] RDX: 0000000000000002 RSI: 0000000000000001 RDI: 0000000000000246
[  641.044333] RBP: ffffa9b34ac97db0 R08: 0000000000000000 R09: 0000000000000000
[  641.044334] R10: 0000000000000000 R11: 00000000000077f5 R12: 0000000000000000
[  641.044336] R13: ffffa9b34ac97e98 R14: ffff9a865e000008 R15: ffff9a86c4cf42b8
[  641.044338] FS:  00007fab73969740(0000) GS:ffff9a86fbb00000(0000) knlGS:0000000000000000
[  641.044340] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  641.044342] CR2: 000055f90bc62035 CR3: 00000000aab5f006 CR4: 00000000003606e0
[  641.044346] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  641.044348] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  641.044349] Call Trace:
[  641.044355]  aa_new_mount+0x119/0x2c0
[  641.044363]  apparmor_sb_mount+0xd4/0x430
[  641.044367]  security_sb_mount+0x46/0x70
[  641.044372]  do_mount+0xbb/0xeb0
[  641.044377]  ? memdup_user+0x4b/0x70
[  641.044380]  ksys_mount+0x7e/0xd0
[  641.044384]  __x64_sys_mount+0x21/0x30
[  641.044388]  do_syscall_64+0x5a/0x1a0
[  641.044392]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  641.044394] RIP: 0033:0x7fab73a8790a
[  641.044397] Code: 48 8b 0d 89 85 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 56 85 0c 00 f7 d8 64 89 01 48
[  641.044399] RSP: 002b:00007ffe0ffe4238 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5
[  641.044401] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fab73a8790a
[  641.044429] RDX: 000055f90bc6203b RSI: 00007ffe0ffe57b1 RDI: 00007ffe0ffe57a5
[  641.044431] RBP: 00007ffe0ffe4250 R08: 0000000000000000 R09: 00007fab73b51d80
[  641.044433] R10: 00000000c0ed0004 R11: 0000000000000206 R12: 000055f90bc610b0
[  641.044434] R13: 00007ffe0ffe4330 R14: 0000000000000000 R15: 0000000000000000
[  641.044457] irq event stamp: 0
[  641.044460] hardirqs last  enabled at (0): [<0000000000000000>]           (null)
[  641.044463] hardirqs last disabled at (0): [<ffffffff82290114>] copy_process.part.30+0x734/0x23f0
[  641.044467] softirqs last  enabled at (0): [<ffffffff82290114>] copy_process.part.30+0x734/0x23f0
[  641.044469] softirqs last disabled at (0): [<0000000000000000>]           (null)
[  641.044470] ---[ end trace c0d54bdacf6af6b2 ]---

Fixes: df323337e507 ("apparmor: Use a memory pool instead per-CPU caches")
Signed-off-by: John Johansen <john.johansen@canonical.com>

apparmor: fix unsigned len comparison with less than zero

The sanity check in macro update_for_len checks to see if len
is less than zero, however, len is a size_t so it can never be
less than zero, so this sanity check is a no-op. Fix this by
making len a ssize_t so the comparison will work and add ulen
that is a size_t copy of len so that the min() macro won't
throw warnings about comparing different types.

Addresses-Coverity: ("Macro compares unsigned to 0")
Fixes: f1bd904175e8 ("apparmor: add the base fns() for domain labels")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>

apparmor: increase left match history buffer size

There have been cases reported where a history buffer size of 8 was
not enough to resolve conflict overlaps. Increase the buffer to and
get rid of the size element which is currently just storing the
constant WB_HISTORY_SIZE.

Signed-off-by: John Johansen <john.johansen@canonical.com>

apparmor: Switch to GFP_KERNEL where possible

After removing preempt_disable() from get_buffers() it is possible to
replace a few GFP_ATOMIC allocations with GFP_KERNEL.

Replace GFP_ATOMIC allocations with GFP_KERNEL where the context looks
to bee preepmtible.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: John Johansen <john.johansen@canonical.com>

apparmor: Use a memory pool instead per-CPU caches

The get_buffers() macro may provide one or two buffers to the caller.
Those buffers are pre-allocated on init for each CPU. By default it
allocates
2* 2 * MAX_PATH * POSSIBLE_CPU

which equals 64KiB on a system with 4 CPUs or 1MiB with 64 CPUs and so
on.

Replace the per-CPU buffers with a common memory pool which is shared
across all CPUs. The pool grows on demand and never shrinks. The pool
starts with two (UP) or four (SMP) elements. By using this pool it is
possible to request a buffer and keeping preemption enabled which avoids
the hack in profile_transition().

It has been pointed out by Tetsuo Handa that GFP_KERNEL allocations for
small amount of memory do not fail. In order not to have an endless
retry, __GFP_RETRY_MAYFAIL is passed (so the memory allocation is not
repeated until success) and retried once hoping that in the meantime a
buffer has been returned to the pool. Since now NULL is possible all
allocation paths check the buffer pointer and return -ENOMEM on failure.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: John Johansen <john.johansen@canonical.com>

apparmor: Force type-casting of current->real_cred

This patch fixes the sparse warning:
warning: cast removes address space '<asn:4>' of expression.

Signed-off-by: Bharath Vedartham <linux.bhar@gmail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>

apparmor: fix spelling mistake "immutible" -> "immutable"

There is a spelling mistake in an information message string, fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>

apparmor: fix blob compression when ns is forced on a policy load

When blob compression is turned on, if the policy namespace is forced
onto a policy load, the policy load will fail as the namespace name
being referenced is inside the compressed policy blob, resulting in
invalid or names that are too long. So duplicate the name before the
blob is compressed.

Fixes: 876dd866c084 ("apparmor: Initial implementation of raw policy blob compression")
Signed-off-by: John Johansen <john.johansen@canonical.com>

apparmor: fix missing ZLIB defines

On configs where ZLIB is not already selected we are getting

undefined reference to `zlib_deflateInit2'
undefined reference to `zlib_deflate'
undefined reference to `zlib_deflateEnd'

For now just select the necessary ZLIB configs.

Fixes: 876dd866c084 ("apparmor: Initial implementation of raw policy blob compression")
Signed-off-by: John Johansen <john.johansen@canonical.com>

apparmor: fix blob compression build failure on ppc

security/apparmor/policy_unpack.c: In function 'deflate_compress':
security/apparmor/policy_unpack.c:1064:4: error: implicit declaration of function 'vfree'; did you mean 'kfree'? [-Werror=implicit-function-declaration]
    vfree(stgbuf);
    ^~~~~
    kfree

Fixes: 876dd866c084 ("apparmor: Initial implementation of raw policy blob compression")
Signed-off-by: John Johansen <john.johansen@canonical.com>

apparmor: Initial implementation of raw policy blob compression

This adds an initial implementation of raw policy blob compression,
using deflate. Compression level can be controlled via a new sysctl,
"apparmor.rawdata_compression_level", which can be set to a value
between 0 (no compression) and 9 (highest compression).

Signed-off-by: Chris Coulson <chris.coulson@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>

Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma

Pull rdma fixes from Jason Gunthorpe:
"Several driver bug fixes posted in the last several weeks

   - Several bug fixes for the hfi1 driver 'TID RDMA' functionality
     merged into 5.1. Since TID RDMA is on by default these all seem to
     be regressions.

   - Wrong software permission checks on memory in mlx5

   - Memory leak in vmw_pvrdma during driver remove

   - Several bug fixes for hns driver features merged into 5.1"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  IB/hfi1: Do not flush send queue in the TID RDMA second leg
  RDMA/hns: Bugfix for SCC hem free
  RDMA/hns: Fix bug that caused srq creation to fail
  RDMA/vmw_pvrdma: Fix memory leak on pvrdma_pci_remove
  IB/mlx5: Reset access mask when looping inside page fault handler
  IB/hfi1: Fix the allocation of RSM table
  IB/hfi1: Eliminate opcode tests on mr deref
  IB/hfi1: Clear the IOWAIT pending bits when QP is put into error state
  IB/hfi1: Failed to drain send queue when QP is put into error state

IB/hfi1: Do not flush send queue in the TID RDMA second leg

When a QP is put into error state, the send queue will be flushed.
This mechanism is implemented in both the first and the second leg
of the send engine. Since the second leg is only responsible for
data transactions in the KDETH space for the TID RDMA WRITE request,
it should not perform the flushing of the send queue.

This patch removes the flushing function of the second leg, but
still keeps the bailing out of the QP if it is put into error state.

Fixes: 70dcb2e3dc6a ("IB/hfi1: Add the TID second leg send packet builder")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost

Pull virtio fixes from Michael Tsirkin:
"Several fixes, add more reviewers to the list"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio: Honour 'may_reduce_num' in vring_create_virtqueue
  MAiNTAINERS: add Paolo, Stefan for virtio blk/scsi
  virtio_pci: fix a NULL pointer reference in vp_del_vqs

apparmor: Restore Y/N in /sys for apparmor's "enabled"

Before commit c5459b829b71 ("LSM: Plumb visibility into optional "enabled"
state"), /sys/module/apparmor/parameters/enabled would show "Y" or "N"
since it was using the "bool" handler. After being changed to "int",
this switched to "1" or "0", breaking the userspace AppArmor detection
of dbus-broker. This restores the Y/N output while keeping the LSM
infrastructure happy.

Before:
$ cat /sys/module/apparmor/parameters/enabled
1

After:
$ cat /sys/module/apparmor/parameters/enabled
Y

Reported-by: David Rheinsberg <david.rheinsberg@gmail.com>
Reviewed-by: David Rheinsberg <david.rheinsberg@gmail.com>
Link: https://lkml.kernel.org/r/CADyDSO6k8vYb1eryT4g6+EHrLCvb68GAbHVWuULkYjcZcYNhhw@mail.gmail.com
Fixes: c5459b829b71 ("LSM: Plumb visibility into optional "enabled" state")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: John Johansen <john.johansen@canonical.com>

Bluetooth: btusb: request wake pin with NOAUTOEN

Badly-designed systems might have (for example) active-high wake pins
that default to high (e.g., because of external pull ups) until they
have an active firmware which starts driving it low. This can cause an
interrupt storm in the time between request_irq() and disable_irq().

We don't support shared interrupts here, so let's just pre-configure the
interrupt to avoid auto-enabling it.

Fixes: fd913ef7ce61 ("Bluetooth: btusb: Add out-of-band wakeup support")
Fixes: 5364a0b4f4be ("arm64: dts: rockchip: move QCA6174A wakeup pin into its USB node")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'mips_fixes_5.1_2' of git://git./linux/kernel/git/mips/linux

Pull MIPS fixes from Paul Burton:
"A few minor MIPS fixes:

   - Provide struct pt_regs * from get_irq_regs() to kgdb_nmicallback()
     when handling an IPI triggered by kgdb_roundup_cpus(), matching the
     behavior of other architectures & resolving kgdb issues for SMP
     systems.

   - Defer a pointer dereference until after a NULL check in the
     irq_shutdown callback for SGI IP27 HUB interrupts.

   - A defconfig update for the MSCC Ocelot to enable some necessary
     drivers"

* tag 'mips_fixes_5.1_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: generic: Add switchdev, pinctrl and fit to ocelot_defconfig
  MIPS: SGI-IP27: Fix use of unchecked pointer in shutdown_bridge_irq
  MIPS: KGDB: fix kgdb support for SMP platforms.

Merge branch 'fixes' of git://git./linux/kernel/git/viro/vfs

Pull misc fixes from Al Viro:
"A few regression fixes from this cycle"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  aio: use kmem_cache_free() instead of kfree()
  iov_iter: Fix build error without CONFIG_CRYPTO
  aio: Fix an error code in __io_submit_one()

Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

1) Off by one and bounds checking fixes in NFC, from Dan Carpenter.

2) There have been many weird regressions in r8169 since we turned ASPM
    support on, some are still not understood nor completely resolved.
    Let's turn this back off for now. From Heiner Kallweit.

3) Signess fixes for ethtool speed value handling, from Michael
    Zhivich.

4) Handle timestamps properly in macb driver, from Paul Thomas.

5) Two erspan fixes, it's the usual "skb ->data potentially reallocated
    and we're holding a stale protocol header pointer". From Lorenzo
    Bianconi.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  bnxt_en: Reset device on RX buffer errors.
  bnxt_en: Improve RX consumer index validity check.
  net: macb driver, check for SKBTX_HW_TSTAMP
  qlogic: qlcnic: fix use of SPEED_UNKNOWN ethtool constant
  broadcom: tg3: fix use of SPEED_UNKNOWN ethtool constant
  ethtool: avoid signed-unsigned comparison in ethtool_validate_speed()
  net: ip6_gre: fix possible use-after-free in ip6erspan_rcv
  net: ip_gre: fix possible use-after-free in erspan_rcv
  r8169: disable ASPM again
  MAINTAINERS: ieee802154: update documentation file pattern
  net: vrf: Fix ping failed when vrf mtu is set to 0
  selftests: add a tc matchall test case
  nfc: nci: Potential off by one in ->pipes[] array
  NFC: nci: Add some bounds checking in nci_hci_cmd_received()

Merge branch 'fixes-v5.1' of git://git./linux/kernel/git/jmorris/linux-security

Pull TPM fixes from James Morris:
"From Jarkko: These are critical fixes for v5.1. Contains also couple
  of new selftests for v5.1 features (partial reads in /dev/tpm0)"

* 'fixes-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  selftests/tpm2: Open tpm dev in unbuffered mode
  selftests/tpm2: Extend tests to cover partial reads
  KEYS: trusted: fix -Wvarags warning
  tpm: Fix the type of the return value in calc_tpm2_event_size()
  KEYS: trusted: allow trusted.ko to initialize w/o a TPM
  tpm: fix an invalid condition in tpm_common_poll
  tpm: turn on TPM on suspend for TPM 1.x

Merge tag 'xtensa-20190408' of git://github.com/jcmvbkbc/linux-xtensa

Pull xtensa fixes from Max Filippov:

- fix syscall number passed to trace_sys_exit

- fix syscall number initialization in start_thread

- fix level interpretation in the return_address

- fix format string warning in init_pmd

* tag 'xtensa-20190408' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: fix format string warning in init_pmd
  xtensa: fix return_address
  xtensa: fix initialization of pt_regs::syscall in start_thread
  xtensa: use actual syscall number in do_syscall_trace_leave

Merge branch 'bnxt_en-fixes'

Michael Chan says:

====================
bnxt_en: 2 bug fixes.

The first patch prevents possible driver crash if we get a bad RX index
from the hardware. The second patch resets the device when the hardware
reports buffer error to recover from the error.

Please queue these for -stable also. Thanks.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_en: Reset device on RX buffer errors.

If the RX completion indicates RX buffers errors, the RX ring will be
disabled by firmware and no packets will be received on that ring from
that point on. Recover by resetting the device.

Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_en: Improve RX consumer index validity check.

There is logic to check that the RX/TPA consumer index is the expected
index to work around a hardware problem. However, the potentially bad
consumer index is first used to index into an array to reference an entry.
This can potentially crash if the bad consumer index is beyond legal
range. Improve the logic to use the consumer index for dereferencing
after the validity check and log an error message.

Fixes: fa7e28127a5a ("bnxt_en: Add workaround to detect bad opaque in rx completion (part 2)")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: macb driver, check for SKBTX_HW_TSTAMP

Make sure SKBTX_HW_TSTAMP (i.e. SOF_TIMESTAMPING_TX_HARDWARE) has been
enabled for this skb. It does fix the issue where normal socks that
aren't expecting a timestamp will not wake up on select, but when a
user does want a SOF_TIMESTAMPING_TX_HARDWARE it does work.

Signed-off-by: Paul Thomas <pthomas8589@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'ethtool-fix-use-of-SPEED_UNKNOWN-constant'

Michael Zhivich says:

====================
ethtool: fix use of SPEED_UNKNOWN constant

This patch series addresses 2 related issues:

1. ethtool_validate_speed() triggers a "signed-unsigned comparison"
warning due to type difference of SPEED_UNKNOWN constant (int)
and argument to ethtool_validate_speed (__u32).

2. some drivers use u16 storage for SPEED_UNKNOWN constant,
resulting in value truncation and thus failure to test against
SPEED_UNKNOWN correctly.

This revised series addresses several feedback comments:
- split up the patch in to series
- do not unnecessarily change drivers that use "int" storage
for speed values
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

qlogic: qlcnic: fix use of SPEED_UNKNOWN ethtool constant

qlcnic driver uses u16 to store SPEED_UKNOWN ethtool constant,
which is defined as -1, resulting in value truncation and
thus incorrect test results against SPEED_UNKNOWN.

For example, the following test will print "False":

    u16 speed = SPEED_UNKNOWN;

    if (speed == SPEED_UNKNOWN)
        printf("True");
    else
        printf("False");

Change storage of speed to use u32 to avoid this issue.

Signed-off-by: Michael Zhivich <mzhivich@akamai.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

broadcom: tg3: fix use of SPEED_UNKNOWN ethtool constant

tg3 driver uses u16 to store SPEED_UKNOWN ethtool constant,
which is defined as -1, resulting in value truncation and
thus incorrect test results against SPEED_UNKNOWN.

For example, the following test will print "False":

u16 speed = SPEED_UNKNOWN;

if (speed == SPEED_UNKNOWN)
printf("True");
else
printf("False");

Change storage of speed to use u32 to avoid this issue.

Signed-off-by: Michael Zhivich <mzhivich@akamai.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

ethtool: avoid signed-unsigned comparison in ethtool_validate_speed()

When building C++ userspace code that includes ethtool.h
with "-Werror -Wall", g++ complains about signed-unsigned comparison in
ethtool_validate_speed() due to definition of SPEED_UNKNOWN as -1.

Explicitly cast SPEED_UNKNOWN to __u32 to match type of
ethtool_validate_speed() argument.

Signed-off-by: Michael Zhivich <mzhivich@akamai.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'erspan-use-after-free'

Lorenzo Bianconi says:

====================
fix possible use-after-free in erspan_v{4,6}

Similar to what I did in commit bb9bd814ebf0 ("ipv6: sit: reset ip
header pointer in ipip6_rcv"), fix possible use-after-free in
erspan_rcv and ip6erspan_rcv extracting tunnel metadata since the
packet can be 'uncloned' running __iptunnel_pull_header
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: ip6_gre: fix possible use-after-free in ip6erspan_rcv

erspan_v6 tunnels run __iptunnel_pull_header on received skbs to remove
erspan header. This can determine a possible use-after-free accessing
pkt_md pointer in ip6erspan_rcv since the packet will be 'uncloned'
running pskb_expand_head if it is a cloned gso skb (e.g if the packet has
been sent though a veth device). Fix it resetting pkt_md pointer after
__iptunnel_pull_header

Fixes: 1d7e2ed22f8d ("net: erspan: refactor existing erspan code")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ip_gre: fix possible use-after-free in erspan_rcv

erspan tunnels run __iptunnel_pull_header on received skbs to remove
gre and erspan headers. This can determine a possible use-after-free
accessing pkt_md pointer in erspan_rcv since the packet will be 'uncloned'
running pskb_expand_head if it is a cloned gso skb (e.g if the packet has
been sent though a veth device). Fix it resetting pkt_md pointer after
__iptunnel_pull_header

Fixes: 1d7e2ed22f8d ("net: erspan: refactor existing erspan code")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests/tpm2: Open tpm dev in unbuffered mode

In order to have control over how many bytes are read or written
the device needs to be opened in unbuffered mode.

Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.morris@microsoft.com>

selftests/tpm2: Extend tests to cover partial reads

Three new tests added:
1. Send get random cmd, read header in 1st read, read the rest in second
   read - expect success
2. Send get random cmd, read only part of the response, send another
   get random command, read the response - expect success
3. Send get random cmd followed by another get random cmd, without
   reading the first response - expect the second cmd to fail with -EBUSY

Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.morris@microsoft.com>

KEYS: trusted: fix -Wvarags warning

Fixes the warning reported by Clang:
security/keys/trusted.c:146:17: warning: passing an object that
undergoes default
      argument promotion to 'va_start' has undefined behavior [-Wvarargs]
        va_start(argp, h3);
                       ^
security/keys/trusted.c:126:37: note: parameter of type 'unsigned
char' is declared here
unsigned char *h2, unsigned char h3, ...)
                               ^
Specifically, it seems that both the C90 (4.8.1.1) and C11 (7.16.1.4)
standards explicitly call this out as undefined behavior:

The parameter parmN is the identifier of the rightmost parameter in
the variable parameter list in the function definition (the one just
before the ...). If the parameter parmN is declared with ... or with a
type that is not compatible with the type that results after
application of the default argument promotions, the behavior is
undefined.

Link: https://github.com/ClangBuiltLinux/linux/issues/41
Link: https://www.eskimo.com/~scs/cclass/int/sx11c.html
Suggested-by: David Laight <David.Laight@aculab.com>
Suggested-by: Denis Kenzior <denkenz@gmail.com>
Suggested-by: James Bottomley <jejb@linux.vnet.ibm.com>
Suggested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.morris@microsoft.com>

tpm: Fix the type of the return value in calc_tpm2_event_size()

calc_tpm2_event_size() has an invalid signature because
it returns a 'size_t' where as its signature says that
it returns 'int'.

Cc: <stable@vger.kernel.org>
Fixes: 4d23cc323cdb ("tpm: add securityfs support for TPM 2.0 firmware event log")
Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.morris@microsoft.com>

KEYS: trusted: allow trusted.ko to initialize w/o a TPM

Allow trusted.ko to initialize w/o a TPM. This commit also adds checks
to the exported functions to fail when a TPM is not available.

Fixes: 240730437deb ("KEYS: trusted: explicitly use tpm_chip structure...")
Cc: James Morris <jmorris@namei.org>
Reported-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.morris@microsoft.com>

tpm: fix an invalid condition in tpm_common_poll

The poll condition should only check response_length,
because reads should only be issued if there is data to read.
The response_read flag only prevents double writes.
The problem was that the write set the response_read to false,
enqued a tpm job, and returned. Then application called poll
which checked the response_read flag and returned EPOLLIN.
Then the application called read, but got nothing.
After all that the async_work kicked in.
Added also mutex_lock around the poll check to prevent
other possible race conditions.

Fixes: 9488585b21bef0df12 ("tpm: add support for partial reads")
Reported-by: Mantas Mikulėnas <grawity@gmail.com>
Tested-by: Mantas Mikulėnas <grawity@gmail.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.morris@microsoft.com>

tpm: turn on TPM on suspend for TPM 1.x

tpm_chip_start/stop() should be also called for TPM 1.x devices on
suspend. Add that functionality back. Do not lock the chip because
it is unnecessary as there are no multiple threads using it when
doing the suspend.

Fixes: a3fbfae82b4c ("tpm: take TPM chip power gating out of tpm_transmit()")
Reported-by: Paul Zimmerman <pauldzim@gmail.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Domenico Andreoli <domenico.andreoli@linux.com>
Signed-off-by: James Morris <james.morris@microsoft.com>

r8169: disable ASPM again

There's a significant number of reports that re-enabling ASPM causes
different issues, ranging from decreased performance to system not
booting at all. This affects only a minority of users, but the number
of affected users is big enough that we better switch off ASPM again.

This will hurt notebook users who are not affected by the issues, they
may see decreased battery runtime w/o ASPM. With the PCI core folks is
being discussed to add generic sysfs attributes to control ASPM.
Once this is in place brave enough users can re-enable ASPM on their
system.

Fixes: a99790bf5c7f ("r8169: Reinstate ASPM Support")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

virtio: Honour 'may_reduce_num' in vring_create_virtqueue

vring_create_virtqueue() allows the caller to specify via the
may_reduce_num parameter whether the vring code is allowed to
allocate a smaller ring than specified.

However, the split ring allocation code tries to allocate a
smaller ring on allocation failure regardless of what the
caller specified. This may cause trouble for e.g. virtio-pci
in legacy mode, which does not support ring resizing. (The
packed ring code does not resize in any case.)

Let's fix this by bailing out immediately in the split ring code
if the requested size cannot be allocated and may_reduce_num has
not been specified.

While at it, fix a typo in the usage instructions.

Fixes: 2a2d1382fe9d ("virtio: Add improved queue allocation API")
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>

MAINTAINERS: ieee802154: update documentation file pattern

When moving the documentation for the ieee802154 subsystem from
plain text to rst the file pattern in the MAINTAINERS file got wrong.
Updating it here to fix scripts using this file.

Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

RDMA/hns: Bugfix for SCC hem free

The method of hem free for SCC context is different from qp context.

In the current version, if free SCC hem during the execution of qp free,
there may be smmu error as below:

arm-smmu-v3 arm-smmu-v3.1.auto: event 0x10 received:
arm-smmu-v3 arm-smmu-v3.1.auto:  0x00007d0000000010
arm-smmu-v3 arm-smmu-v3.1.auto:  0x000012000000017c
arm-smmu-v3 arm-smmu-v3.1.auto:  0x00000000000009e0
arm-smmu-v3 arm-smmu-v3.1.auto:  0x0000000000000000

As SCC context is still used by hardware after qp free, we can solve this
problem by removing SCC hem free from hns_roce_qp_free.

Fixes: 6a157f7d1b14 ("RDMA/hns: Add SCC context allocation support for hip08")
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Fix bug that caused srq creation to fail

Due to the incorrect use of the seg and obj information, the position of
the mtt is calculated incorrectly, and the free space of the page is not
enough to store the entire mtt, resulting in access to the next page. This
patch fixes this problem.

Unable to handle kernel paging request at virtual address ffff00006e3cd000
...
Call trace:
  hns_roce_write_mtt+0x154/0x2f0 [hns_roce]
  hns_roce_buf_write_mtt+0xa8/0xd8 [hns_roce]
  hns_roce_create_srq+0x74c/0x808 [hns_roce]
  ib_create_srq+0x28/0xc8

Fixes: 0203b14c4f32 ("RDMA/hns: Unify the calculation for hem index in hip08")
Signed-off-by: chenglang <chenglang@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/vmw_pvrdma: Fix memory leak on pvrdma_pci_remove

Make sure to free the DSR on pvrdma_pci_remove() to avoid the memory leak.

Fixes: 29c8d9eba550 ("IB: Add vmw_pvrdma driver")
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Acked-by: Adit Ranadive <aditr@vmware.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

MAiNTAINERS: add Paolo, Stefan for virtio blk/scsi

Jason doesn't really have the time to review blk/scsi
patches. Paolo and Setfan agreed to help out.

Thanks guys!

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio_pci: fix a NULL pointer reference in vp_del_vqs

If the msix_affinity_masks is alloced failed, then we'll
try to free some resources in vp_free_vectors() that may
access it directly.

We met the following stack in our production:
[   29.296767] BUG: unable to handle kernel NULL pointer dereference at  (null)
[   29.311151] IP: [<ffffffffc04fe35a>] vp_free_vectors+0x6a/0x150 [virtio_pci]
[   29.324787] PGD 0
[   29.333224] Oops: 0000 [#1] SMP
[...]
[   29.425175] RIP: 0010:[<ffffffffc04fe35a>]  [<ffffffffc04fe35a>] vp_free_vectors+0x6a/0x150 [virtio_pci]
[   29.441405] RSP: 0018:ffff9a55c2dcfa10  EFLAGS: 00010206
[   29.453491] RAX: 0000000000000000 RBX: ffff9a55c322c400 RCX: 0000000000000000
[   29.467488] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9a55c322c400
[   29.481461] RBP: ffff9a55c2dcfa20 R08: 0000000000000000 R09: ffffc1b6806ff020
[   29.495427] R10: 0000000000000e95 R11: 0000000000aaaaaa R12: 0000000000000000
[   29.509414] R13: 0000000000010000 R14: ffff9a55bd2d9e98 R15: ffff9a55c322c400
[   29.523407] FS:  00007fdcba69f8c0(0000) GS:ffff9a55c2840000(0000) knlGS:0000000000000000
[   29.538472] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   29.551621] CR2: 0000000000000000 CR3: 000000003ce52000 CR4: 00000000003607a0
[   29.565886] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   29.580055] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   29.594122] Call Trace:
[   29.603446]  [<ffffffffc04fe8a2>] vp_request_msix_vectors+0xe2/0x260 [virtio_pci]
[   29.618017]  [<ffffffffc04fedc5>] vp_try_to_find_vqs+0x95/0x3b0 [virtio_pci]
[   29.632152]  [<ffffffffc04ff117>] vp_find_vqs+0x37/0xb0 [virtio_pci]
[   29.645582]  [<ffffffffc057bf63>] init_vq+0x153/0x260 [virtio_blk]
[   29.658831]  [<ffffffffc057c1e8>] virtblk_probe+0xe8/0x87f [virtio_blk]
[...]

Cc: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Longpeng <longpeng2@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>

Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6

Pull crypto fix from Herbert Xu:
"This fixes a bug in the implementation of xcbc and cmac in caam"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: caam - fix copy of next buffer for xcbc and cmac

net: vrf: Fix ping failed when vrf mtu is set to 0

When the mtu of a vrf device is set to 0, it would cause ping
failed. So I think we should limit vrf mtu in a reasonable range
to solve this problem. I set dev->min_mtu to IPV6_MIN_MTU, so it
will works for both ipv4 and ipv6. And if dev->max_mtu still be 0
can be confusing, so I set dev->max_mtu to ETH_MAX_MTU.

Here is the reproduce step:

1.Config vrf interface and set mtu to 0:
3: enp4s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel
master vrf1 state UP mode DEFAULT group default qlen 1000
    link/ether 52:54:00:9e:dd:c1 brd ff:ff:ff:ff:ff:ff

2.Ping peer:
3: enp4s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel
master vrf1 state UP group default qlen 1000
    link/ether 52:54:00:9e:dd:c1 brd ff:ff:ff:ff:ff:ff
    inet 10.0.0.1/16 scope global enp4s0
       valid_lft forever preferred_lft forever
connect: Network is unreachable

3.Set mtu to default value, ping works:
PING 10.0.0.2 (10.0.0.2) 56(84) bytes of data.
64 bytes from 10.0.0.2: icmp_seq=1 ttl=64 time=1.88 ms

Fixes: ad49bc6361ca2 ("net: vrf: remove MTU limits for vrf device")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

slab: fix a crash by reading /proc/slab_allocators

The commit 510ded33e075 ("slab: implement slab_root_caches list")
changes the name of the list node within "struct kmem_cache" from "list"
to "root_caches_node", but leaks_show() still use the "list" which
causes a crash when reading /proc/slab_allocators.

You need to have CONFIG_SLAB=y and CONFIG_MEMCG=y to see the problem,
because without MEMCG all slab caches are root caches, and the "list"
node happens to be the right one.

Fixes: 510ded33e075 ("slab: implement slab_root_caches list")
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Tobin C. Harding <tobin@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

selftests: add a tc matchall test case

This is a follow up of the commit 0db6f8befc32 ("net/sched: fix ->get
helper of the matchall cls").

To test it:
$ cd tools/testing/selftests/tc-testing
$ ln -s ../plugin-lib/nsPlugin.py plugins/20-nsPlugin.py
$ ./tdc.py -n -e 2638

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Linux 5.1-rc4

Merge tag 'armsoc-fixes' of git://git./linux/kernel/git/soc/soc

Pull ARM SoC fixes from Olof Johansson:
"A collection of fixes from the last few weeks. Most of them are
  smaller tweaks and fixes to DT and hardware descriptions for boards.
  Some of the more significant ones are:

   - eMMC and RGMII stability tweaks for rk3288

   - DDC fixes for Rock PI 4

   - Audio fixes for two TI am335x eval boards

   - D_CAN clock fix for am335x

   - Compilation fixes for clang

   - !HOTPLUG_CPU compilation fix for one of the new platforms this
     release (milbeaut)

   - A revert of a gpio fix for nomadik that instead was fixed in the
     gpio subsystem

   - Whitespace fix for the DT JSON schema (no tabs allowed)"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
  ARM: milbeaut: fix build with !CONFIG_HOTPLUG_CPU
  ARM: iop: don't use using 64-bit DMA masks
  ARM: orion: don't use using 64-bit DMA masks
  Revert "ARM: dts: nomadik: Fix polarity of SPI CS"
  dt-bindings: cpu: Fix JSON schema
  arm/mach-at91/pm : fix possible object reference leak
  ARM: dts: at91: Fix typo in ISC_D0 on PC9
  ARM: dts: Fix dcan clkctrl clock for am3
  reset: meson-audio-arb: Fix missing .owner setting of reset_controller_dev
  dt-bindings: reset: meson-g12a: Add missing USB2 PHY resets
  ARM: dts: rockchip: Remove #address/#size-cells from rk3288-veyron gpio-keys
  ARM: dts: rockchip: Remove #address/#size-cells from rk3288 mipi_dsi
  ARM: dts: rockchip: Fix gpu opp node names for rk3288
  ARM: dts: am335x-evmsk: Correct the regulators for the audio codec
  ARM: dts: am335x-evm: Correct the regulators for the audio codec
  ARM: OMAP2+: add missing of_node_put after of_device_is_available
  ARM: OMAP1: ams-delta: Fix broken GPIO ID allocation
  arm64: dts: stratix10: add the sysmgr-syscon property from the gmac's
  arm64: dts: rockchip: fix rk3328 sdmmc0 write errors
  arm64: dts: rockchip: fix rk3328 rgmii high tx error rate
  ...

Merge tag 'for-linus-20190407' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

- Fixups for the pf/pcd queue handling (YueHaibing)

- Revert of the three direct issue changes as they have been proven to
   cause an issue with dm-mpath (Bart)

- Plug rq_count reset fix (Dongli)

- io_uring double free in fileset registration error handling (me)

- Make null_blk handle bad numa node passed in (John)

- BFQ ifdef fix (Konstantin)

- Flush queue leak fix (Shenghui)

- Plug trace fix (Yufen)

* tag 'for-linus-20190407' of git://git.kernel.dk/linux-block:
  xsysace: Fix error handling in ace_setup
  null_blk: prevent crash from bad home_node value
  block: Revert v5.0 blk_mq_request_issue_directly() changes
  paride/pcd: Fix potential NULL pointer dereference and mem leak
  blk-mq: do not reset plug->rq_count before the list is sorted
  paride/pf: Fix potential NULL pointer dereference
  io_uring: fix double free in case of fileset regitration failure
  blk-mq: add trace block plug and unplug for multiple queues
  block: use blk_free_flush_queue() to free hctx->fq in blk_mq_init_hctx
  block/bfq: fix ifdef for CONFIG_BFQ_GROUP_IOSCHED=y

ARM: milbeaut: fix build with !CONFIG_HOTPLUG_CPU

When HOTPLUG_CPU is disabled, some fields in the smp operations
are not available or needed:

arch/arm/mach-milbeaut/platsmp.c:90:3: error: field designator 'cpu_die' does not refer to any field in type
      'struct smp_operations'
        .cpu_die                = m10v_cpu_die,
         ^
arch/arm/mach-milbeaut/platsmp.c:91:3: error: field designator 'cpu_kill' does not refer to any field in type
      'struct smp_operations'
        .cpu_kill               = m10v_cpu_kill,
         ^

Hide them in an #ifdef like the other platforms do.

Fixes: 9fb29c734f9e ("ARM: milbeaut: Add basic support for Milbeaut m10v SoC")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>

ARM: iop: don't use using 64-bit DMA masks

clang warns about statically defined DMA masks from the DMA_BIT_MASK
macro with length 64:

arch/arm/mach-iop13xx/setup.c:303:35: error: shift count >= width of type [-Werror,-Wshift-count-overflow]
static u64 iop13xx_adma_dmamask = DMA_BIT_MASK(64);
^~~~~~~~~~~~~~~~
include/linux/dma-mapping.h:141:54: note: expanded from macro 'DMA_BIT_MASK'
#define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1))
^ ~~~

The ones in iop shouldn't really be 64 bit masks, so changing them
to what the driver can support avoids the warning.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>

ARM: orion: don't use using 64-bit DMA masks

clang warns about statically defined DMA masks from the DMA_BIT_MASK
macro with length 64:

arch/arm/plat-orion/common.c:625:29: error: shift count >= width of type [-Werror,-Wshift-count-overflow]
.coherent_dma_mask = DMA_BIT_MASK(64),
^~~~~~~~~~~~~~~~
include/linux/dma-mapping.h:141:54: note: expanded from macro 'DMA_BIT_MASK'
#define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1))

The ones in orion shouldn't really be 64 bit masks, so changing them
to what the driver can support avoids the warning.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>

Revert "ARM: dts: nomadik: Fix polarity of SPI CS"

This reverts commit fa9463564e77067df81b0b8dec91adbbbc47bfb4.

Per Linus Walleij:

Dear ARM SoC maintainers,

can you please revert this patch. It was the wrong solution to the
wrong problem, and I must have acted in stress. Andrey fixed the
real bug in a proper way in these commits:

commit e5545c94e43b8f6599ffc01df8d1aedf18ee912a
"gpio: of: Check propname before applying "cs-gpios" quirks"
commit 7ce40277bf848391705011ba37eac2e377cbd9e6
"gpio: of: Check for "spi-cs-high" in child instead of parent node"

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v5.1/fixes-signed' of git://git./linux/kernel/git/tmlind/linux-omap into arm/fixes

Fixes for omaps for v5.1-rc cycle

Few small fixes for omap variants:

- Fix ams-delta gpio IDs
- Add missing of_node_put for omapdss platform init code
- Fix unconfigured audio regulators for two am335x boards
- Fix use of wrong offset for am335x d_can clocks

* tag 'omap-for-v5.1/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: Fix dcan clkctrl clock for am3
  ARM: dts: am335x-evmsk: Correct the regulators for the audio codec
  ARM: dts: am335x-evm: Correct the regulators for the audio codec
  ARM: OMAP2+: add missing of_node_put after of_device_is_available
  ARM: OMAP1: ams-delta: Fix broken GPIO ID allocation

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'at91-5.1-fixes' of git://git./linux/kernel/git/at91/linux into arm/fixes

AT91 fixes for 5.1

- fix a typo in sama5d2 pinmuxing which concerns the ISC data 0 signal
- fix a kobject reference leak

* tag 'at91-5.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
arm/mach-at91/pm : fix possible object reference leak
ARM: dts: at91: Fix typo in ISC_D0 on PC9

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'v5.1-rockchip-dtfixes-1' of git://git./linux/kernel/git/mmind/linux-rockchip into arm/fixes

Fixes for dtc warnings, fixes for ethernet transfers on rk3328,
sd-card related fixes on both rk3328 ans rk3288-tinker and a
regulator fix on rock64 and making ddc actually work on the
Rock PI 4 due to missing the ddc bus.

* tag 'v5.1-rockchip-dtfixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: Remove #address/#size-cells from rk3288-veyron gpio-keys
  ARM: dts: rockchip: Remove #address/#size-cells from rk3288 mipi_dsi
  ARM: dts: rockchip: Fix gpu opp node names for rk3288
  arm64: dts: rockchip: fix rk3328 sdmmc0 write errors
  arm64: dts: rockchip: fix rk3328 rgmii high tx error rate
  ARM: dts: rockchip: Fix SD card detection on rk3288-tinker
  arm64: dts: rockchip: Fix vcc_host1_5v GPIO polarity on rk3328-rock64
  ARM: dts: rockchip: fix rk3288 cpu opp node reference
  arm64: dts: rockchip: add DDC bus on Rock Pi 4
  arm64: dts: rockchip: fix rk3328-roc-cc gmac2io tx/rx_delay

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'stratix10_fix_for_v5.1' of git://git./linux/kernel/git/dinguyen/linux into arm/fixes

arm64: dts: stratix10: fix emac loading warning
- Add missing "altr,sysmgr-syscon" property to all gmac nodes

* tag 'stratix10_fix_for_v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: stratix10: add the sysmgr-syscon property from the gmac's

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'reset-fixes-for-v5.1' of git://git.pengutronix.de/pza/linux into arm/fixes

Reset controller fixes for v5.1

This tag adds missing USB PHY reset lines to the Meson G12A reset
controller header and fixes the Meson Audio ARB driver to prevent
module unloading while it is in use.

* tag 'reset-fixes-for-v5.1' of git://git.pengutronix.de/pza/linux:
reset: meson-audio-arb: Fix missing .owner setting of reset_controller_dev
dt-bindings: reset: meson-g12a: Add missing USB2 PHY resets

Signed-off-by: Olof Johansson <olof@lixom.net>

dt-bindings: cpu: Fix JSON schema

Commit fd73403a4862 ("dt-bindings: arm: Add SMP enable-method for
Milbeaut") added support for a new cpu enable-method, but did so using
tabulations to ident. This is however invalid in the syntax, and resulted
in a failure when trying to use that schemas for validation.

Use spaces instead of tabs to indent to fix this.

Fixes: fd73403a4862 ("dt-bindings: arm: Add SMP enable-method for Milbeaut")
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Sugaya Taichi <sugaya.taichi@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'for-linus-5.1b-rc4-tag' of git://git./linux/kernel/git/xen/tip

Pull xen fixes from Juergen Gross:
"One minor fix and a small cleanup for the xen privcmd driver"

* tag 'for-linus-5.1b-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: Prevent buffer overflow in privcmd ioctl
xen: use struct_size() helper in kzalloc()

Merge tag 'mtd/fixes-for-5.1-rc4' of git://git./linux/kernel/git/mtd/linux

Pull MTD fix from Richard Weinberger:
"A single fix for a possible infinite loop in the cfi_cmdset_0002
driver"

* tag 'mtd/fixes-for-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: cfi: fix deadloop in cfi_cmdset_0002.c do_write_buffer

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
"Five small fixes. Four in three drivers: qedi, lpfc and storvsc. The
  final one is labelled core, but merely adds a dh rdac entry for Lenovo
  systems"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: lpfc: Fix missing wakeups on abort threads
  scsi: storvsc: Reduce default ring buffer size to 128 Kbytes
  scsi: storvsc: Fix calculation of sub-channel count
  scsi: core: add new RDAC LENOVO/DE_Series device
  scsi: qedi: remove declaration of nvm_image from stack

nfc: nci: Potential off by one in ->pipes[] array

This is similar to commit e285d5bfb7e9 ("NFC: Fix the number of pipes")
where we changed NFC_HCI_MAX_PIPES from 127 to 128.

As the comment next to the define explains, the pipe identifier is 7
bits long.  The highest possible pipe is 127, but the number of possible
pipes is 128.  As the code is now, then there is potential for an
out of bounds array access:

    net/nfc/nci/hci.c:297 nci_hci_cmd_received() warn: array off by one?
    'ndev->hci_dev->pipes[pipe]' '0-127 == 127'

Fixes: 11f54f228643 ("NFC: nci: Add HCI over NCI protocol support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

NFC: nci: Add some bounds checking in nci_hci_cmd_received()

This is similar to commit 674d9de02aa7 ("NFC: Fix possible memory
corruption when handling SHDLC I-Frame commands").

I'm not totally sure, but I think that commit description may have
overstated the danger.  I was under the impression that this data came
from the firmware?  If you can't trust your networking firmware, then
you're already in trouble.

Anyway, these days we add bounds checking where ever we can and we call
it kernel hardening.  Better safe than sorry.

Fixes: 11f54f228643 ("NFC: nci: Add HCI over NCI protocol support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'i2c/for-current-fixed' of git://git./linux/kernel/git/wsa/linux

Pull i2c fix from Wolfram Sang:
"A simple but wanted driver bugfix"

* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: imx: don't leak the i2c adapter on error

Merge branch 'parisc-5.1-2' of git://git./linux/kernel/git/deller/parisc-linux

Pull parisc fixes from Helge Deller:
"A 32-bit boot regression fix introduced in the merge window, a QEMU
  detection fix and two fixes by Sven regarding ptrace & kprobes"

* 'parisc-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Detect QEMU earlier in boot process
  parisc: also set iaoq_b in instruction_pointer_set()
  parisc: regs_return_value() should return gpr28
  Revert: parisc: Use F_EXTEND() macro in iosapic code

parisc: Detect QEMU earlier in boot process

While adding LASI support to QEMU, I noticed that the QEMU detection in
the kernel happens much too late. For example, when a LASI chip is found
by the kernel, it registers the LASI LED driver as well. But when we
run on QEMU it makes sense to avoid spending unnecessary CPU cycles, so
we need to access the running_on_QEMU flag earlier than before.

This patch now makes the QEMU detection the fist task of the Linux
kernel by moving it to where the kernel enters the C-coding.

Fixes: 310d82784fb4 ("parisc: qemu idle sleep support")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v4.14+

parisc: also set iaoq_b in instruction_pointer_set()

When setting the instruction pointer on PA-RISC we also need
to set the back of the instruction queue to the new offset, otherwise
we will execute on instruction from the new location, and jumping
back to the old location stored in iaoq_b.

Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 75ebedf1d263 ("parisc: Add HAVE_REGS_AND_STACK_ACCESS_API feature")
Cc: stable@vger.kernel.org # 4.19+

parisc: regs_return_value() should return gpr28

While working on kretprobes for PA-RISC I was wondering while the
kprobes sanity test always fails on kretprobes. This is caused by
returning gpr20 instead of gpr28.

Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # 4.14+

Revert: parisc: Use F_EXTEND() macro in iosapic code

Revert parts of commit 97d7e2e3fd8a ("parisc: Use F_EXTEND() macro in
iosapic code"). It breaks booting the 32-bit kernel on some machines.

Reported-by: Sven Schnelle <svens@stackframe.org>
Tested-by: Sven Schnelle <svens@stackframe.org>
Fixes: 97d7e2e3fd8a ("parisc: Use F_EXTEND() macro in iosapic code")
Signed-off-by: Helge Deller <deller@gmx.de>

fs: stream_open - opener for stream-like files so that read and write can run simultaneously without deadlock

Commit 9c225f2655e3 ("vfs: atomic f_pos accesses as per POSIX") added
locking for file.f_pos access and in particular made concurrent read and
write not possible - now both those functions take f_pos lock for the
whole run, and so if e.g. a read is blocked waiting for data, write will
deadlock waiting for that read to complete.

This caused regression for stream-like files where previously read and
write could run simultaneously, but after that patch could not do so
anymore. See e.g. commit 581d21a2d02a ("xenbus: fix deadlock on writes
to /proc/xen/xenbus") which fixes such regression for particular case of
/proc/xen/xenbus.

The patch that added f_pos lock in 2014 did so to guarantee POSIX thread
safety for read/write/lseek and added the locking to file descriptors of
all regular files. In 2014 that thread-safety problem was not new as it
was already discussed earlier in 2006.

However even though 2006'th version of Linus's patch was adding f_pos
locking "only for files that are marked seekable with FMODE_LSEEK (thus
avoiding the stream-like objects like pipes and sockets)", the 2014
version - the one that actually made it into the tree as 9c225f2655e3 -
is doing so irregardless of whether a file is seekable or not.

See

    https://lore.kernel.org/lkml/53022DB1.4070805@gmail.com/
    https://lwn.net/Articles/180387
    https://lwn.net/Articles/180396

for historic context.

The reason that it did so is, probably, that there are many files that
are marked non-seekable, but e.g. their read implementation actually
depends on knowing current position to correctly handle the read. Some
examples:

kernel/power/user.c snapshot_read
fs/debugfs/file.c u32_array_read
fs/fuse/control.c fuse_conn_waiting_read + ...
drivers/hwmon/asus_atk0110.c atk_debugfs_ggrp_read
arch/s390/hypfs/inode.c hypfs_read_iter
...

Despite that, many nonseekable_open users implement read and write with
pure stream semantics - they don't depend on passed ppos at all. And for
those cases where read could wait for something inside, it creates a
situation similar to xenbus - the write could be never made to go until
read is done, and read is waiting for some, potentially external, event,
for potentially unbounded time -> deadlock.

Besides xenbus, there are 14 such places in the kernel that I've found
with semantic patch (see below):

drivers/xen/evtchn.c:667:8-24: ERROR: evtchn_fops: .read() can deadlock .write()
drivers/isdn/capi/capi.c:963:8-24: ERROR: capi_fops: .read() can deadlock .write()
drivers/input/evdev.c:527:1-17: ERROR: evdev_fops: .read() can deadlock .write()
drivers/char/pcmcia/cm4000_cs.c:1685:7-23: ERROR: cm4000_fops: .read() can deadlock .write()
net/rfkill/core.c:1146:8-24: ERROR: rfkill_fops: .read() can deadlock .write()
drivers/s390/char/fs3270.c:488:1-17: ERROR: fs3270_fops: .read() can deadlock .write()
drivers/usb/misc/ldusb.c:310:1-17: ERROR: ld_usb_fops: .read() can deadlock .write()
drivers/hid/uhid.c:635:1-17: ERROR: uhid_fops: .read() can deadlock .write()
net/batman-adv/icmp_socket.c:80:1-17: ERROR: batadv_fops: .read() can deadlock .write()
drivers/media/rc/lirc_dev.c:198:1-17: ERROR: lirc_fops: .read() can deadlock .write()
drivers/leds/uleds.c:77:1-17: ERROR: uleds_fops: .read() can deadlock .write()
drivers/input/misc/uinput.c:400:1-17: ERROR: uinput_fops: .read() can deadlock .write()
drivers/infiniband/core/user_mad.c:985:7-23: ERROR: umad_fops: .read() can deadlock .write()
drivers/gnss/core.c:45:1-17: ERROR: gnss_fops: .read() can deadlock .write()

In addition to the cases above another regression caused by f_pos
locking is that now FUSE filesystems that implement open with
FOPEN_NONSEEKABLE flag, can no longer implement bidirectional
stream-like files - for the same reason as above e.g. read can deadlock
write locking on file.f_pos in the kernel.

FUSE's FOPEN_NONSEEKABLE was added in 2008 in a7c1b990f715 ("fuse:
implement nonseekable open") to support OSSPD. OSSPD implements /dev/dsp
in userspace with FOPEN_NONSEEKABLE flag, with corresponding read and
write routines not depending on current position at all, and with both
read and write being potentially blocking operations:

See

    https://github.com/libfuse/osspd
    https://lwn.net/Articles/308445

    https://github.com/libfuse/osspd/blob/14a9cff0/osspd.c#L1406
    https://github.com/libfuse/osspd/blob/14a9cff0/osspd.c#L1438-L1477
    https://github.com/libfuse/osspd/blob/14a9cff0/osspd.c#L1479-L1510

Corresponding libfuse example/test also describes FOPEN_NONSEEKABLE as
"somewhat pipe-like files ..." with read handler not using offset.
However that test implements only read without write and cannot exercise
the deadlock scenario:

    https://github.com/libfuse/libfuse/blob/fuse-3.4.2-3-ga1bff7d/example/poll.c#L124-L131
    https://github.com/libfuse/libfuse/blob/fuse-3.4.2-3-ga1bff7d/example/poll.c#L146-L163
    https://github.com/libfuse/libfuse/blob/fuse-3.4.2-3-ga1bff7d/example/poll.c#L209-L216

I've actually hit the read vs write deadlock for real while implementing
my FUSE filesystem where there is /head/watch file, for which open
creates separate bidirectional socket-like stream in between filesystem
and its user with both read and write being later performed
simultaneously. And there it is semantically not easy to split the
stream into two separate read-only and write-only channels:

    https://lab.nexedi.com/kirr/wendelin.core/blob/f13aa600/wcfs/wcfs.go#L88-169

Let's fix this regression. The plan is:

1. We can't change nonseekable_open to include &~FMODE_ATOMIC_POS -
   doing so would break many in-kernel nonseekable_open users which
   actually use ppos in read/write handlers.

2. Add stream_open() to kernel to open stream-like non-seekable file
   descriptors. Read and write on such file descriptors would never use
   nor change ppos. And with that property on stream-like files read and
   write will be running without taking f_pos lock - i.e. read and write
   could be running simultaneously.

3. With semantic patch search and convert to stream_open all in-kernel
   nonseekable_open users for which read and write actually do not
   depend on ppos and where there is no other methods in file_operations
   which assume @offset access.

4. Add FOPEN_STREAM to fs/fuse/ and open in-kernel file-descriptors via
   steam_open if that bit is present in filesystem open reply.

   It was tempting to change fs/fuse/ open handler to use stream_open
   instead of nonseekable_open on just FOPEN_NONSEEKABLE flags, but
   grepping through Debian codesearch shows users of FOPEN_NONSEEKABLE,
   and in particular GVFS which actually uses offset in its read and
   write handlers

https://codesearch.debian.net/search?q=-%3Enonseekable+%3D
https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1080
https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1247-1346
https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1399-1481

   so if we would do such a change it will break a real user.

5. Add stream_open and FOPEN_STREAM handling to stable kernels starting
   from v3.14+ (the kernel where 9c225f2655 first appeared).

   This will allow to patch OSSPD and other FUSE filesystems that
   provide stream-like files to return FOPEN_STREAM | FOPEN_NONSEEKABLE
   in their open handler and this way avoid the deadlock on all kernel
   versions. This should work because fs/fuse/ ignores unknown open
   flags returned from a filesystem and so passing FOPEN_STREAM to a
   kernel that is not aware of this flag cannot hurt. In turn the kernel
   that is not aware of FOPEN_STREAM will be < v3.14 where just
   FOPEN_NONSEEKABLE is sufficient to implement streams without read vs
   write deadlock.

This patch adds stream_open, converts /proc/xen/xenbus to it and adds
semantic patch to automatically locate in-kernel places that are either
required to be converted due to read vs write deadlock, or that are just
safe to be converted because read and write do not use ppos and there
are no other funky methods in file_operations.

Regarding semantic patch I've verified each generated change manually -
that it is correct to convert - and each other nonseekable_open instance
left - that it is either not correct to convert there, or that it is not
converted due to current stream_open.cocci limitations.

The script also does not convert files that should be valid to convert,
but that currently have .llseek = noop_llseek or generic_file_llseek for
unknown reason despite file being opened with nonseekable_open (e.g.
drivers/input/mousedev.c)

Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Yongzhi Pan <panyongzhi@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Tejun Heo <tj@kernel.org>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Nikolaus Rath <Nikolaus@rath.org>
Cc: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

xsysace: Fix error handling in ace_setup

If xace hardware reports a bad version number, the error handling code
in ace_setup() calls put_disk(), followed by queue cleanup. However, since
the disk data structure has the queue pointer set, put_disk() also
cleans and releases the queue. This results in blk_cleanup_queue()
accessing an already released data structure, which in turn may result
in a crash such as the following.

[   10.681671] BUG: Kernel NULL pointer dereference at 0x00000040
[   10.681826] Faulting instruction address: 0xc0431480
[   10.682072] Oops: Kernel access of bad area, sig: 11 [#1]
[   10.682251] BE PAGE_SIZE=4K PREEMPT Xilinx Virtex440
[   10.682387] Modules linked in:
[   10.682528] CPU: 0 PID: 1 Comm: swapper Tainted: G        W         5.0.0-rc6-next-20190218+ #2
[   10.682733] NIP:  c0431480 LR: c043147c CTR: c0422ad8
[   10.682863] REGS: cf82fbe0 TRAP: 0300   Tainted: G        W          (5.0.0-rc6-next-20190218+)
[   10.683065] MSR:  00029000 <CE,EE,ME>  CR: 22000222  XER: 00000000
[   10.683236] DEAR: 00000040 ESR: 00000000
[   10.683236] GPR00: c043147c cf82fc90 cf82ccc0 00000000 00000000 00000000 00000002 00000000
[   10.683236] GPR08: 00000000 00000000 c04310bc 00000000 22000222 00000000 c0002c54 00000000
[   10.683236] GPR16: 00000000 00000001 c09aa39c c09021b0 c09021dc 00000007 c0a68c08 00000000
[   10.683236] GPR24: 00000001 ced6d400 ced6dcf0 c0815d9c 00000000 00000000 00000000 cedf0800
[   10.684331] NIP [c0431480] blk_mq_run_hw_queue+0x28/0x114
[   10.684473] LR [c043147c] blk_mq_run_hw_queue+0x24/0x114
[   10.684602] Call Trace:
[   10.684671] [cf82fc90] [c043147c] blk_mq_run_hw_queue+0x24/0x114 (unreliable)
[   10.684854] [cf82fcc0] [c04315bc] blk_mq_run_hw_queues+0x50/0x7c
[   10.685002] [cf82fce0] [c0422b24] blk_set_queue_dying+0x30/0x68
[   10.685154] [cf82fcf0] [c0423ec0] blk_cleanup_queue+0x34/0x14c
[   10.685306] [cf82fd10] [c054d73c] ace_probe+0x3dc/0x508
[   10.685445] [cf82fd50] [c052d740] platform_drv_probe+0x4c/0xb8
[   10.685592] [cf82fd70] [c052abb0] really_probe+0x20c/0x32c
[   10.685728] [cf82fda0] [c052ae58] driver_probe_device+0x68/0x464
[   10.685877] [cf82fdc0] [c052b500] device_driver_attach+0xb4/0xe4
[   10.686024] [cf82fde0] [c052b5dc] __driver_attach+0xac/0xfc
[   10.686161] [cf82fe00] [c0528428] bus_for_each_dev+0x80/0xc0
[   10.686314] [cf82fe30] [c0529b3c] bus_add_driver+0x144/0x234
[   10.686457] [cf82fe50] [c052c46c] driver_register+0x88/0x15c
[   10.686610] [cf82fe60] [c09de288] ace_init+0x4c/0xac
[   10.686742] [cf82fe80] [c0002730] do_one_initcall+0xac/0x330
[   10.686888] [cf82fee0] [c09aafd0] kernel_init_freeable+0x34c/0x478
[   10.687043] [cf82ff30] [c0002c6c] kernel_init+0x18/0x114
[   10.687188] [cf82ff40] [c000f2f0] ret_from_kernel_thread+0x14/0x1c
[   10.687349] Instruction dump:
[   10.687435] 3863ffd4 4bfffd70 9421ffd0 7c0802a6 93c10028 7c9e2378 93e1002c 38810008
[   10.687637] 7c7f1b78 90010034 4bfffc25 813f008c <81290040> 75290100 4182002c 80810008
[   10.688056] ---[ end trace 13c9ff51d41b9d40 ]---

Fix the problem by setting the disk queue pointer to NULL before calling
put_disk(). A more comprehensive fix might be to rearrange the code
to check the hardware version before initializing data structures,
but I don't know if this would have undesirable side effects, and
it would increase the complexity of backporting the fix to older kernels.

Fixes: 74489a91dd43a ("Add support for Xilinx SystemACE CompactFlash interface")
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

null_blk: prevent crash from bad home_node value

At module load, if the selected home_node value is greater than
the available numa nodes, the system will crash in
__alloc_pages_nodemask() due to a bad paging request. Prevent this
user error crash by detecting the bad value, logging an error, and
setting g_home_node back to the default of NUMA_NO_NODE.

Signed-off-by: John Pittman <jpittman@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'rtc-5.1-2' of git://git./linux/kernel/git/abelloni/linux

Pull RTC fixes from Alexandre Belloni:

- Various alarm fixes for da9063, cros-ec and sh

- sd3078 manufacturer name fix as this was introduced this cycle

* tag 'rtc-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  rtc: da9063: set uie_unsupported when relevant
  rtc: sd3078: fix manufacturer name
  rtc: sh: Fix invalid alarm warning for non-enabled alarm
  rtc: cros-ec: Fail suspend/resume if wake IRQ can't be configured

i2c: imx: don't leak the i2c adapter on error

Make sure to free the i2c adapter on the error exit path.

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Fixes: e1ab9a468e3b ("i2c: imx: improve the error handling in i2c_imx_dma_request()")
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
"14 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  kernel/sysctl.c: fix out-of-bounds access when setting file-max
  mm/util.c: fix strndup_user() comment
  sh: fix multiple function definition build errors
  MAINTAINERS: add maintainer and replacing reviewer ARM/NUVOTON NPCM
  MAINTAINERS: fix bad pattern in ARM/NUVOTON NPCM
  mm: writeback: use exact memcg dirty counts
  psi: clarify the units used in pressure files
  mm/huge_memory.c: fix modifying of page protection by insert_pfn_pmd()
  hugetlbfs: fix memory leak for resv_map
  mm: fix vm_fault_t cast in VM_FAULT_GET_HINDEX()
  lib/lzo: fix bugs for very short or empty input
  include/linux/bitrev.h: fix constant bitrev
  kmemleak: powerpc: skip scanning holes in the .bss section
  lib/string.c: implement a basic bcmp

kernel/sysctl.c: fix out-of-bounds access when setting file-max

Commit 32a5ad9c2285 ("sysctl: handle overflow for file-max") hooked up
min/max values for the file-max sysctl parameter via the .extra1 and
.extra2 fields in the corresponding struct ctl_table entry.

Unfortunately, the minimum value points at the global 'zero' variable,
which is an int.  This results in a KASAN splat when accessed as a long
by proc_doulongvec_minmax on 64-bit architectures:

  | BUG: KASAN: global-out-of-bounds in __do_proc_doulongvec_minmax+0x5d8/0x6a0
  | Read of size 8 at addr ffff2000133d1c20 by task systemd/1
  |
  | CPU: 0 PID: 1 Comm: systemd Not tainted 5.1.0-rc3-00012-g40b114779944 #2
  | Hardware name: linux,dummy-virt (DT)
  | Call trace:
  |  dump_backtrace+0x0/0x228
  |  show_stack+0x14/0x20
  |  dump_stack+0xe8/0x124
  |  print_address_description+0x60/0x258
  |  kasan_report+0x140/0x1a0
  |  __asan_report_load8_noabort+0x18/0x20
  |  __do_proc_doulongvec_minmax+0x5d8/0x6a0
  |  proc_doulongvec_minmax+0x4c/0x78
  |  proc_sys_call_handler.isra.19+0x144/0x1d8
  |  proc_sys_write+0x34/0x58
  |  __vfs_write+0x54/0xe8
  |  vfs_write+0x124/0x3c0
  |  ksys_write+0xbc/0x168
  |  __arm64_sys_write+0x68/0x98
  |  el0_svc_common+0x100/0x258
  |  el0_svc_handler+0x48/0xc0
  |  el0_svc+0x8/0xc
  |
  | The buggy address belongs to the variable:
  |  zero+0x0/0x40
  |
  | Memory state around the buggy address:
  |  ffff2000133d1b00: 00 00 00 00 00 00 00 00 fa fa fa fa 04 fa fa fa
  |  ffff2000133d1b80: fa fa fa fa 04 fa fa fa fa fa fa fa 04 fa fa fa
  | >ffff2000133d1c00: fa fa fa fa 04 fa fa fa fa fa fa fa 00 00 00 00
  |                                ^
  |  ffff2000133d1c80: fa fa fa fa 00 fa fa fa fa fa fa fa 00 00 00 00
  |  ffff2000133d1d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Fix the splat by introducing a unsigned long 'zero_ul' and using that
instead.

Link: http://lkml.kernel.org/r/20190403153409.17307-1-will.deacon@arm.com
Fixes: 32a5ad9c2285 ("sysctl: handle overflow for file-max")
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Christian Brauner <christian@brauner.io>
Cc: Kees Cook <keescook@chromium.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/util.c: fix strndup_user() comment

The kerneldoc misdescribes strndup_user()'s return value.

Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Timur Tabi <timur@freescale.com>
Cc: Mihai Caraman <mihai.caraman@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sh: fix multiple function definition build errors

Many of the sh CPU-types have their own plat_irq_setup() and
arch_init_clk_ops() functions, so these same (empty) functions in
arch/sh/boards/of-generic.c are not needed and cause build errors.

If there is some case where these empty functions are needed, they can
be retained by marking them as "__weak" while at the same time making
builds that do not need them succeed.

Fixes these build errors:

arch/sh/boards/of-generic.o: In function `plat_irq_setup':
(.init.text+0x134): multiple definition of `plat_irq_setup'
arch/sh/kernel/cpu/sh2/setup-sh7619.o:(.init.text+0x30): first defined here
arch/sh/boards/of-generic.o: In function `arch_init_clk_ops':
(.init.text+0x118): multiple definition of `arch_init_clk_ops'
arch/sh/kernel/cpu/sh2/clock-sh7619.o:(.init.text+0x0): first defined here

Link: http://lkml.kernel.org/r/9ee4e0c5-f100-86a2-bd4d-1d3287ceab31@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kbuild test robot <lkp@intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: add maintainer and replacing reviewer ARM/NUVOTON NPCM

Add Tali Perry as Nuvoton NPCM maintainer, replace Brendan Higgins
Nuvoton NPCM reviewer with Benjamin Fair.

Link: http://lkml.kernel.org/r/20190328235752.334462-2-tmaimon77@gmail.com
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Benjamin Fair <benjaminfair@google.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Cc: Joe Perches <joe@perches.com>
Cc: Avi Fishman <avifishman70@gmail.com>
Cc: Patrick Venture <venture@google.com>
Cc: Nancy Yuen <yuenn@google.com>
Cc: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: fix bad pattern in ARM/NUVOTON NPCM

In the process of upstreaming architecture support for ARM/NUVOTON NPCM
include/dt-bindings/clock/nuvoton,npcm7xx-clks.h was renamed
include/dt-bindings/clock/nuvoton,npcm7xx-clock.h without updating
MAINTAINERS. This updates the MAINTAINERS pattern to match the new name
of this file.

Link: http://lkml.kernel.org/r/20190328235752.334462-1-tmaimon77@gmail.com
Fixes: 6a498e06ba22 ("MAINTAINERS: Add entry for the Nuvoton NPCM architecture")
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Reported-by: Joe Perches <joe@perches.com>
Reviewed-by: Benjamin Fair <benjaminfair@google.com>
Cc: Avi Fishman <avifishman70@gmail.com>
Cc: Mukesh Ojha <mojha@codeaurora.org>
Cc: Nancy Yuen <yuenn@google.com>
Cc: Patrick Venture <venture@google.com>
Cc: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: writeback: use exact memcg dirty counts

Since commit a983b5ebee57 ("mm: memcontrol: fix excessive complexity in
memory.stat reporting") memcg dirty and writeback counters are managed
as:

1) per-memcg per-cpu values in range of [-32..32]

2) per-memcg atomic counter

When a per-cpu counter cannot fit in [-32..32] it's flushed to the
atomic.  Stat readers only check the atomic.  Thus readers such as
balance_dirty_pages() may see a nontrivial error margin: 32 pages per
cpu.

Assuming 100 cpus:
   4k x86 page_size:  13 MiB error per memcg
  64k ppc page_size: 200 MiB error per memcg

Considering that dirty+writeback are used together for some decisions the
errors double.

This inaccuracy can lead to undeserved oom kills.  One nasty case is
when all per-cpu counters hold positive values offsetting an atomic
negative value (i.e.  per_cpu[*]=32, atomic=n_cpu*-32).
balance_dirty_pages() only consults the atomic and does not consider
throttling the next n_cpu*32 dirty pages.  If the file_lru is in the
13..200 MiB range then there's absolutely no dirty throttling, which
burdens vmscan with only dirty+writeback pages thus resorting to oom
kill.

It could be argued that tiny containers are not supported, but it's more
subtle.  It's the amount the space available for file lru that matters.
If a container has memory.max-200MiB of non reclaimable memory, then it
will also suffer such oom kills on a 100 cpu machine.

The following test reliably ooms without this patch.  This patch avoids
oom kills.

  $ cat test
  mount -t cgroup2 none /dev/cgroup
  cd /dev/cgroup
  echo +io +memory > cgroup.subtree_control
  mkdir test
  cd test
  echo 10M > memory.max
  (echo $BASHPID > cgroup.procs && exec /memcg-writeback-stress /foo)
  (echo $BASHPID > cgroup.procs && exec dd if=/dev/zero of=/foo bs=2M count=100)

  $ cat memcg-writeback-stress.c
  /*
   * Dirty pages from all but one cpu.
   * Clean pages from the non dirtying cpu.
   * This is to stress per cpu counter imbalance.
   * On a 100 cpu machine:
   * - per memcg per cpu dirty count is 32 pages for each of 99 cpus
   * - per memcg atomic is -99*32 pages
   * - thus the complete dirty limit: sum of all counters 0
   * - balance_dirty_pages() only sees atomic count -99*32 pages, which
   *   it max()s to 0.
   * - So a workload can dirty -99*32 pages before balance_dirty_pages()
   *   cares.
   */
  #define _GNU_SOURCE
  #include <err.h>
  #include <fcntl.h>
  #include <sched.h>
  #include <stdlib.h>
  #include <stdio.h>
  #include <sys/stat.h>
  #include <sys/sysinfo.h>
  #include <sys/types.h>
  #include <unistd.h>

  static char *buf;
  static int bufSize;

  static void set_affinity(int cpu)
  {
   cpu_set_t affinity;

   CPU_ZERO(&affinity);
   CPU_SET(cpu, &affinity);
   if (sched_setaffinity(0, sizeof(affinity), &affinity))
   err(1, "sched_setaffinity");
  }

  static void dirty_on(int output_fd, int cpu)
  {
   int i, wrote;

   set_affinity(cpu);
   for (i = 0; i < 32; i++) {
   for (wrote = 0; wrote < bufSize; ) {
   int ret = write(output_fd, buf+wrote, bufSize-wrote);
   if (ret == -1)
   err(1, "write");
   wrote += ret;
   }
   }
  }

  int main(int argc, char **argv)
  {
   int cpu, flush_cpu = 1, output_fd;
   const char *output;

   if (argc != 2)
   errx(1, "usage: output_file");

   output = argv[1];
   bufSize = getpagesize();
   buf = malloc(getpagesize());
   if (buf == NULL)
   errx(1, "malloc failed");

   output_fd = open(output, O_CREAT|O_RDWR);
   if (output_fd == -1)
   err(1, "open(%s)", output);

   for (cpu = 0; cpu < get_nprocs(); cpu++) {
   if (cpu != flush_cpu)
   dirty_on(output_fd, cpu);
   }

   set_affinity(flush_cpu);
   if (fsync(output_fd))
   err(1, "fsync(%s)", output);
   if (close(output_fd))
   err(1, "close(%s)", output);
   free(buf);
  }

Make balance_dirty_pages() and wb_over_bg_thresh() work harder to
collect exact per memcg counters.  This avoids the aforementioned oom
kills.

This does not affect the overhead of memory.stat, which still reads the
single atomic counter.

Why not use percpu_counter? memcg already handles cpus going offline, so
no need for that overhead from percpu_counter.  And the percpu_counter
spinlocks are more heavyweight than is required.

It probably also makes sense to use exact dirty and writeback counters
in memcg oom reports.  But that is saved for later.

Link: http://lkml.kernel.org/r/20190329174609.164344-1-gthelen@google.com
Signed-off-by: Greg Thelen <gthelen@google.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org> [4.16+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

psi: clarify the units used in pressure files

The output of the PSI files show a bunch of numbers with no unit.  The
psi.txt documentation file also does not indicate what units are used.
One can only find out by looking at the source code.  The units are
percentage for the averages and useconds for the total.  Make the
information easier to find by documenting the units in psi.txt.

Link: http://lkml.kernel.org/r/20190402193810.3450-1-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/huge_memory.c: fix modifying of page protection by insert_pfn_pmd()

With some architectures like ppc64, set_pmd_at() cannot cope with a
situation where there is already some (different) valid entry present.

Use pmdp_set_access_flags() instead to modify the pfn which is built to
deal with modifying existing PMD entries.

This is similar to commit cae85cb8add3 ("mm/memory.c: fix modifying of
page protection by insert_pfn()")

We also do similar update w.r.t insert_pfn_pud eventhough ppc64 don't
support pud pfn entries now.

Without this patch we also see the below message in kernel log "BUG:
non-zero pgtables_bytes on freeing mm:"

Link: http://lkml.kernel.org/r/20190402115125.18803-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reported-by: Chandan Rajendra <chandan@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlbfs: fix memory leak for resv_map

When mknod is used to create a block special file in hugetlbfs, it will
allocate an inode and kmalloc a 'struct resv_map' via resv_map_alloc().
inode->i_mapping->private_data will point the newly allocated resv_map.
However, when the device special file is opened bd_acquire() will set
inode->i_mapping to bd_inode->i_mapping.  Thus the pointer to the
allocated resv_map is lost and the structure is leaked.

Programs to reproduce:
        mount -t hugetlbfs nodev hugetlbfs
        mknod hugetlbfs/dev b 0 0
        exec 30<> hugetlbfs/dev
        umount hugetlbfs/

resv_map structures are only needed for inodes which can have associated
page allocations.  To fix the leak, only allocate resv_map for those
inodes which could possibly be associated with page allocations.

Link: http://lkml.kernel.org/r/20190401213101.16476-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reported-by: Yufen Yu <yuyufen@huawei.com>
Suggested-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: fix vm_fault_t cast in VM_FAULT_GET_HINDEX()

Symmetrically to VM_FAULT_SET_HINDEX(), we need a force-cast in
VM_FAULT_GET_HINDEX() to tell sparse that this is intentional.

Sparse complains about the current code when building a kernel with
CONFIG_MEMORY_FAILURE:

arch/x86/mm/fault.c:1058:53: warning: restricted vm_fault_t degrades to integer

Link: http://lkml.kernel.org/r/20190327204117.35215-1-jannh@google.com
Fixes: 3d3539018d2c ("mm: create the new vm_fault_t type")
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/lzo: fix bugs for very short or empty input

For very short input data (0 - 1 bytes), lzo-rle was not behaving
correctly. Fix this behaviour and update documentation accordingly.

For zero-length input, lzo v0 outputs an end-of-stream marker only,
which was misinterpreted by lzo-rle as a bitstream version number.
Ensure bitstream versions > 0 require a minimum stream length of 5.

Also fixes a bug in handling the tail for very short inputs when a
bitstream version is present.

Link: http://lkml.kernel.org/r/20190326165857.34613-1-dave.rodgman@arm.com
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/linux/bitrev.h: fix constant bitrev

clang points out with hundreds of warnings that the bitrev macros have a
problem with constant input:

  drivers/hwmon/sht15.c:187:11: error: variable '__x' is uninitialized when used within its own initialization
        [-Werror,-Wuninitialized]
          u8 crc = bitrev8(data->val_status & 0x0F);
                   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  include/linux/bitrev.h:102:21: note: expanded from macro 'bitrev8'
          __constant_bitrev8(__x) :                       \
          ~~~~~~~~~~~~~~~~~~~^~~~
  include/linux/bitrev.h:67:11: note: expanded from macro '__constant_bitrev8'
          u8 __x = x;                     \
             ~~~   ^

Both the bitrev and the __constant_bitrev macros use an internal
variable named __x, which goes horribly wrong when passing one to the
other.

The obvious fix is to rename one of the variables, so this adds an extra
'_'.

It seems we got away with this because

- there are only a few drivers using bitrev macros

- usually there are no constant arguments to those

- when they are constant, they tend to be either 0 or (unsigned)-1
   (drivers/isdn/i4l/isdnhdlc.o, drivers/iio/amplifiers/ad8366.c) and
   give the correct result by pure chance.

In fact, the only driver that I could find that gets different results
with this is drivers/net/wan/slic_ds26522.c, which in turn is a driver
for fairly rare hardware (adding the maintainer to Cc for testing).

Link: http://lkml.kernel.org/r/20190322140503.123580-1-arnd@arndb.de
Fixes: 556d2f055bf6 ("ARM: 8187/1: add CONFIG_HAVE_ARCH_BITREVERSE to support rbit instruction")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Zhao Qiang <qiang.zhao@nxp.com>
Cc: Yalin Wang <yalin.wang@sonymobile.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kmemleak: powerpc: skip scanning holes in the .bss section

Commit 2d4f567103ff ("KVM: PPC: Introduce kvm_tmp framework") adds
kvm_tmp[] into the .bss section and then free the rest of unused spaces
back to the page allocator.

kernel_init
  kvm_guest_init
    kvm_free_tmp
      free_reserved_area
        free_unref_page
          free_unref_page_prepare

With DEBUG_PAGEALLOC=y, it will unmap those pages from kernel.  As the
result, kmemleak scan will trigger a panic when it scans the .bss
section with unmapped pages.

This patch creates dedicated kmemleak objects for the .data, .bss and
potentially .data..ro_after_init sections to allow partial freeing via
the kmemleak_free_part() in the powerpc kvm_free_tmp() function.

Link: http://lkml.kernel.org/r/20190321171917.62049-1-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Qian Cai <cai@lca.pw>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Tested-by: Qian Cai <cai@lca.pw>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Avi Kivity <avi@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/string.c: implement a basic bcmp

A recent optimization in Clang (r355672) lowers comparisons of the
return value of memcmp against zero to comparisons of the return value
of bcmp against zero.  This helps some platforms that implement bcmp
more efficiently than memcmp.  glibc simply aliases bcmp to memcmp, but
an optimized implementation is in the works.

This results in linkage failures for all targets with Clang due to the
undefined symbol.  For now, just implement bcmp as a tailcail to memcmp
to unbreak the build.  This routine can be further optimized in the
future.

Other ideas discussed:

* A weak alias was discussed, but breaks for architectures that define
   their own implementations of memcmp since aliases to declarations are
   not permitted (only definitions). Arch-specific memcmp
   implementations typically declare memcmp in C headers, but implement
   them in assembly.

* -ffreestanding also is used sporadically throughout the kernel.

* -fno-builtin-bcmp doesn't work when doing LTO.

Link: https://bugs.llvm.org/show_bug.cgi?id=41035
Link: https://code.woboq.org/userspace/glibc/string/memcmp.c.html#bcmp
Link: https://github.com/llvm/llvm-project/commit/8e16d73346f8091461319a7dfc4ddd18eedcff13
Link: https://github.com/ClangBuiltLinux/linux/issues/416
Link: http://lkml.kernel.org/r/20190313211335.165605-1-ndesaulniers@google.com
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Reported-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: James Y Knight <jyknight@google.com>
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Suggested-by: Nathan Chancellor <natechancellor@gmail.com>
Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'for-5.1/dm-fixes' of git://git./linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

- Two queue_limits stacking fixes: disable discards if underlying
   driver does. And propagate BDI_CAP_STABLE_WRITES to fix sporadic
   checksum errors.

- Fix that reverts a DM core limit that wasn't needed given that
   dm-crypt was already updated to impose an equivalent limit.

- Fix dm-init to properly establish 'const' for __initconst array.

- Fix deadlock in DM integrity target that occurs when overlapping IO
   is being issued to it. And two smaller fixes to the DM integrity
   target.

* tag 'for-5.1/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm integrity: fix deadlock with overlapping I/O
  dm: disable DISCARD if the underlying storage no longer supports it
  dm table: propagate BDI_CAP_STABLE_WRITES to fix sporadic checksum errors
  dm: revert 8f50e358153d ("dm: limit the max bio size as BIO_MAX_PAGES * PAGE_SIZE")
  dm init: fix const confusion for dm_allowed_targets array
  dm integrity: make dm_integrity_init and dm_integrity_exit static
  dm integrity: change memcmp to strncmp in dm_integrity_ctr

Merge tag 'vfio-v5.1-rc4' of git://github.com/awilliam/linux-vfio

Pull VFIO fixes from Alex Williamson:

- Fix clang printk format errors (Louis Taylor)

- Declare structure static to fix sparse warning (Wang Hai)

- Limit user DMA mappings per container (CVE-2019-3882) (Alex
   Williamson)

* tag 'vfio-v5.1-rc4' of git://github.com/awilliam/linux-vfio:
  vfio/type1: Limit DMA mappings per container
  vfio/spapr_tce: Make symbol 'tce_iommu_driver_ops' static
  vfio/pci: use correct format characters

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
"x86 fixes for overflows and other nastiness"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: nVMX: fix x2APIC VTPR read intercept
  KVM: x86: nVMX: close leak of L0's x2APIC MSRs (CVE-2019-3887)
  KVM: SVM: prevent DBG_DECRYPT and DBG_ENCRYPT overflow
  kvm: svm: fix potential get_num_contig_pages overflow

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fix from Catalin Marinas:
"Fix unwind_frame() in the context of pseudo NMI"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: fix wrong check of on_sdei_stack in nmi context

Merge tag 'trace-5.1-rc3' of git://git./linux/kernel/git/rostedt/linux-trace

Pull syscall-get-arguments cleanup and fixes from Steven Rostedt:
"Andy Lutomirski approached me to tell me that the
  syscall_get_arguments() implementation in x86 was horrible and gcc
  certainly gets it wrong.

  He said that since the tracepoints only pass in 0 and 6 for i and n
  repectively, it should be optimized for that case. Inspecting the
  kernel, I discovered that all users pass in 0 for i and only one file
  passing in something other than 6 for the number of arguments. That
  code happens to be my own code used for the special syscall tracing.

  That can easily be converted to just using 0 and 6 as well, and only
  copying what is needed. Which is probably the faster path anyway for
  that case.

  Along the way, a couple of real fixes came from this as the
  syscall_get_arguments() function was incorrect for csky and riscv.

  x86 has been optimized to for the new interface that removes the
  variable number of arguments, but the other architectures could still
  use some loving and take more advantage of the simpler interface"

* tag 'trace-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  syscalls: Remove start and number from syscall_set_arguments() args
  syscalls: Remove start and number from syscall_get_arguments() args
  csky: Fix syscall_get_arguments() and syscall_set_arguments()
  riscv: Fix syscall_get_arguments() and syscall_set_arguments()
  tracing/syscalls: Pass in hardcoded 6 into syscall_get_arguments()
  ptrace: Remove maxargs from task_current_syscall()