media/bcm2835-unicam: Add support for configuration via MC API

Adds Media Controller API support for more complex pipelines.
libcamera is about to switch to using this mechanism for configuring
sensors.

This can be enabled by either a module parameter, or device tree.

Various functions have been moved to group video-centric and
mc-centric functions together.

Based on a similar conversion done to ti-vpe.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

media/bcm2835-unicam: Parse pad numbers correctly

The driver was making big assumptions about the source device
using pad 0 and 1, which doesn't follow for more complex
devices where Unicam's source device may be a sink device for
something else.

Read the pad numbers through media controller, and reference
them appropriately.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

vc04_services: isp: Report input node as wanting full range RAW color space

RAW color spaces are more usually reported as having full range
quantization.

Tested using libcamera.

Signed-off-by: David Plowman <david.plowman@raspberrypi.com>

media: i2c: ov9281: Sensor should report RAW color space

Tested on Raspberry Pi running libcamera.

Signed-off-by: David Plowman <david.plowman@raspberrypi.com>

media: i2c: ov5647: Sensor should report RAW color space

Tested on Raspberry Pi running libcamera.

Signed-off-by: David Plowman <david.plowman@raspberrypi.com>

media: i2c: imx519: Sensor should report RAW color space

Tested on Raspberry Pi running libcamera.

Signed-off-by: David Plowman <david.plowman@raspberrypi.com>

media: i2c: imx477: Sensor should report RAW color space

Tested on Raspberry Pi running libcamera.

Signed-off-by: David Plowman <david.plowman@raspberrypi.com>

media: i2c: imx290: Sensor should report RAW color space

Tested on Raspberry Pi running libcamera.

Signed-off-by: David Plowman <david.plowman@raspberrypi.com>

media: i2c: imx219: Sensor should report RAW color space

Tested on Raspberry Pi running libcamera.

Signed-off-by: David Plowman <david.plowman@raspberrypi.com>

configs: Add CONFIG_FB_SIMPLE to bcmrpi3_defconfig

See: https://github.com/raspberrypi/linux/pull/4640

Signed-off-by: Erik Tagirov <erik@tagirov.ch>

gpio: bcm-virt: Fix the get() method

The get() method does not understand the on-the-wire encoding of the
remote GPIO states, thinking they are simple on/off bits when they are
really pairs of 16-bit counts. Rewrite the get() handler to return the
value last written, which will eventually match the actual GPIO state
if there are no other changes.

See: https://github.com/raspberrypi/linux/issues/4638

Signed-off-by: Phil Elwell <phil@raspberrypi.com>

config: Enable FSFS_FS_SECURITY

Add a negligible amount of core kernel code for capability-based
access control on F2FS.

See: https://github.com/raspberrypi/linux/issues/2778

Signed-off-by: Phil Elwell <phil@raspberrypi.com>

Revert "block, bfq: honor already-setup queue merges"

[ Upstream commit ebc69e897e17373fbe1daaff1debaa77583a5284 ]

This reverts commit 2d52c58b9c9bdae0ca3df6a1eab5745ab3f7d80b.

We have had several folks complain that this causes hangs for them, which
is especially problematic as the commit has also hit stable already.

As no resolution seems to be forthcoming right now, revert the patch.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=214503
Fixes: 2d52c58b9c9b ("block, bfq: honor already-setup queue merges")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Merge remote-tracking branch 'stable/linux-5.10.y' into rpi-5.10.y

ARM: dts: Delete vestigial vcsm node

Signed-off-by: Phil Elwell <phil@raspberrypi.com>

ARM: dts: bcm2835_audio missing firmware reference

The firmware driver has been changed to count its clients. An earlier
commit removed the downstream patch permitting the hacky technique of
passing NULL to rpi_firmware_get to pick up the last instace, but
failed to add the necessary "firmware" property to the bcm2835_audio
node. Correct that omission.

See: https://github.com/raspberrypi/linux/issues/4634
     https://github.com/raspberrypi/linux/issues/4635

Signed-off-by: Phil Elwell <phil@raspberrypi.com>

Linux 5.10.74

Link: https://lore.kernel.org/r/20211014145207.979449962@linuxfoundation.org
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Hulk Robot <hulkrobot@huawei.com>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (pmbus/ibm-cffps) max_power_out swap changes

[ Upstream commit f067d5585cda2de1e47dde914a8a4f151659e0ad ]

The bytes for max_power_out from the ibm-cffps devices differ in byte
order for some power supplies.

The Witherspoon power supply returns the bytes in MSB/LSB order.

The Rainier power supply returns the bytes in LSB/MSB order.

The Witherspoon power supply uses version cffps1. The Rainier power
supply should use version cffps2. If version is cffps1, swap the bytes
before output to max_power_out.

Tested:
    Witherspoon before: 3148. Witherspoon after: 3148.
    Rainier before: 53255. Rainier after: 2000.

Signed-off-by: Brandon Wyman <bjwyman@gmail.com>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210928205051.1222815-1-bjwyman@gmail.com
[groeck: Replaced yoda programming]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched: Always inline is_percpu_thread()

[ Upstream commit 83d40a61046f73103b4e5d8f1310261487ff63b0 ]

  vmlinux.o: warning: objtool: check_preemption_disabled()+0x81: call to is_percpu_thread() leaves .noinstr.text section

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210928084218.063371959@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/core: fix userpage->time_enabled of inactive events

[ Upstream commit f792565326825ed806626da50c6f9a928f1079c1 ]

Users of rdpmc rely on the mmapped user page to calculate accurate
time_enabled. Currently, userpage->time_enabled is only updated when the
event is added to the pmu. As a result, inactive event (due to counter
multiplexing) does not have accurate userpage->time_enabled. This can
be reproduced with something like:

   /* open 20 task perf_event "cycles", to create multiplexing */

   fd = perf_event_open();  /* open task perf_event "cycles" */
   userpage = mmap(fd);     /* use mmap and rdmpc */

   while (true) {
     time_enabled_mmap = xxx; /* use logic in perf_event_mmap_page */
     time_enabled_read = read(fd).time_enabled;
     if (time_enabled_mmap > time_enabled_read)
         BUG();
   }

Fix this by updating userpage for inactive events in merge_sched_in.

Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reported-and-tested-by: Lucian Grijincu <lucian@fb.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210929194313.2398474-1-songliubraving@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: virtio_scsi: Fix spelling mistake "Unsupport" -> "Unsupported"

[ Upstream commit cced4c0ec7c06f5230a2958907a409c849762293 ]

There are a couple of spelling mistakes in pr_info and pr_err messages.
Fix them.

Link: https://lore.kernel.org/r/20210924230330.143785-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ses: Fix unsigned comparison with less than zero

[ Upstream commit dd689ed5aa905daf4ba4c99319a52aad6ea0a796 ]

Fix the following coccicheck warning:

./drivers/scsi/ses.c:137:10-16: WARNING: Unsigned expression compared
with zero: result > 0.

Link: https://lore.kernel.org/r/1632477113-90378-1-git-send-email-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: fix gart.bo pin_count leak

[ Upstream commit 66805763a97f8f7bdf742fc0851d85c02ed9411f ]

gmc_v{9,10}_0_gart_disable() isn't called matched with
correspoding gart_enbale function in SRIOV case. This will
lead to gart.bo pin_count leak on driver unload.

Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Leslie Shi <Yuliang.Shi@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sun: SUNVNET_COMMON should depend on INET

[ Upstream commit 103bde372f084206c6972be543ecc247ebbff9f3 ]

When CONFIG_INET is not set, there are failing references to IPv4
functions, so make this driver depend on INET.

Fixes these build errors:

sparc64-linux-ld: drivers/net/ethernet/sun/sunvnet_common.o: in function `sunvnet_start_xmit_common':
sunvnet_common.c:(.text+0x1a68): undefined reference to `__icmp_send'
sparc64-linux-ld: drivers/net/ethernet/sun/sunvnet_common.o: in function `sunvnet_poll_common':
sunvnet_common.c:(.text+0x358c): undefined reference to `ip_send_check'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Aaron Young <aaron.young@oracle.com>
Cc: Rashmi Narasimhan <rashmi.narasimhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vboxfs: fix broken legacy mount signature checking

[ Upstream commit 9b3b353ef330e20bc2d99bf3165cc044cff26a09 ]

Commit 9d682ea6bcc7 ("vboxsf: Fix the check for the old binary
mount-arguments struct") was meant to fix a build error due to sign
mismatch in 'char' and the use of character constants, but it just moved
the error elsewhere, in that on some architectures characters and signed
and on others they are unsigned, and that's just how the C standard
works.

The proper fix is a simple "don't do that then".  The code was just
being silly and odd, and it should never have cared about signed vs
unsigned characters in the first place, since what it is testing is not
four "characters", but four bytes.

And the way to compare four bytes is by using "memcmp()".

Which compilers will know to just turn into a single 32-bit compare with
a constant, as long as you don't have crazy debug options enabled.

Link: https://lore.kernel.org/lkml/20210927094123.576521-1-arnd@kernel.org/
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: check return value of rhashtable_init

[ Upstream commit 111461d573741c17eafad029ac93474fa9adcce0 ]

When rhashtable_init() fails, it returns -EINVAL.
However, since error return value of rhashtable_init is not checked,
it can cause use of uninitialized pointers.
So, fix unhandled errors of rhashtable_init.

Signed-off-by: MichelleJin <shjy180909@gmail.com>
Link: https://lore.kernel.org/r/20210927033457.1020967-4-shjy180909@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: prevent user from passing illegal stab size

[ Upstream commit b193e15ac69d56f35e1d8e2b5d16cbd47764d053 ]

We observed below report when playing with netlink sock:

  UBSAN: shift-out-of-bounds in net/sched/sch_api.c:580:10
  shift exponent 249 is too large for 32-bit type
  CPU: 0 PID: 685 Comm: a.out Not tainted
  Call Trace:
   dump_stack_lvl+0x8d/0xcf
   ubsan_epilogue+0xa/0x4e
   __ubsan_handle_shift_out_of_bounds+0x161/0x182
   __qdisc_calculate_pkt_len+0xf0/0x190
   __dev_queue_xmit+0x2ed/0x15b0

it seems like kernel won't check the stab log value passing from
user, and will use the insane value later to calculate pkt_len.

This patch just add a check on the size/cell_log to avoid insane
calculation.

Reported-by: Abaci <abaci@linux.alibaba.com>
Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (ltc2947) Properly handle errors when looking for the external clock

[ Upstream commit 6f7d70467121f790b36af2d84bc02b5c236bf5e6 ]

The return value of devm_clk_get should in general be propagated to
upper layer. In this case the clk is optional, use the appropriate
wrapper instead of interpreting all errors as "The optional clk is not
available".

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210923201113.398932-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

m68k: Handle arrivals of multiple signals correctly

[ Upstream commit 4bb0bd81ce5e97092dfda6a106d414b703ec0ee8 ]

When we have several pending signals, have entered with the kernel
with large exception frame *and* have already built at least one
sigframe, regs->stkadj is going to be non-zero and regs->format/sr/pc
are going to be junk - the real values are in shifted exception stack
frame we'd built when putting together the first sigframe.

If that happens, subsequent sigframes are going to be garbage.
Not hard to fix - just need to find the "adjusted" frame first
and look for format/vector/sr/pc in it.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Tested-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/YP2dBIAPTaVvHiZ6@zeniv-ca.linux.org.uk
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: Drop frames from invalid MAC address in ad-hoc mode

[ Upstream commit a6555f844549cd190eb060daef595f94d3de1582 ]

WARNING: CPU: 1 PID: 9 at net/mac80211/sta_info.c:554
sta_info_insert_rcu+0x121/0x12a0
Modules linked in:
CPU: 1 PID: 9 Comm: kworker/u8:1 Not tainted 5.14.0-rc7+ #253
Workqueue: phy3 ieee80211_iface_work
RIP: 0010:sta_info_insert_rcu+0x121/0x12a0
...
Call Trace:
 ieee80211_ibss_finish_sta+0xbc/0x170
 ieee80211_ibss_work+0x13f/0x7d0
 ieee80211_iface_work+0x37a/0x500
 process_one_work+0x357/0x850
 worker_thread+0x41/0x4d0

If an Ad-Hoc node receives packets with invalid source MAC address,
it hits a WARN_ON in sta_info_insert_check(), this can spam the log.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20210827144230.39944-1-yuehaibing@huawei.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_nat_masquerade: defer conntrack walk to work queue

[ Upstream commit 7970a19b71044bf4dc2c1becc200275bdf1884d4 ]

The ipv4 and device notifiers are called with RTNL mutex held.
The table walk can take some time, better not block other RTNL users.

'ip a' has been reported to block for up to 20 seconds when conntrack table
has many entries and device down events are frequent (e.g., PPP).

Reported-and-tested-by: Martin Zaharinov <micron10@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_nat_masquerade: make async masq_inet6_event handling generic

[ Upstream commit 30db406923b9285a9bac06a6af5e74bd6d0f1d06 ]

masq_inet6_event is called asynchronously from system work queue,
because the inet6 notifier is atomic and nf_iterate_cleanup can sleep.

The ipv4 and device notifiers call nf_iterate_cleanup directly.

This is legal, but these notifiers are called with RTNL mutex held.
A large conntrack table with many devices coming and going will have severe
impact on the system usability, with 'ip a' blocking for several seconds.

This change places the defer code into a helper and makes it more
generic so ipv4 and ifdown notifiers can be converted to defer the
cleanup walk as well in a follow patch.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: loader: release_firmware() on load failure to avoid batching

[ Upstream commit 8a8e1813ffc35111fc0b6db49968ceb0e1615ced ]

Invoke release_firmware() when the firmware fails to boot in
sof_probe_continue().

The request_firmware() framework must be informed of failures in
sof_probe_continue() otherwise its internal "batching"
feature (different from caching) cached the firmware image
forever. Attempts to correct the file in /lib/firmware/ were then
silently and confusingly ignored until the next reboot. Unloading the
drivers did not help because from their disconnected perspective the
firmware had failed so there was nothing to release.

Also leverage the new snd_sof_fw_unload() function to simplify the
snd_sof_device_remove() function.

Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210916085008.28929-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: wacom: Add new Intuos BT (CTL-4100WL/CTL-6100WL) device IDs

[ Upstream commit 0c8fbaa553077630e8eae45bd9676cfc01836aeb ]

Add the new PIDs to wacom_wac.c to support the new models in the Intuos series.

[jkosina@suse.cz: fix changelog]
Signed-off-by: Joshua Dickens <joshua.dickens@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: ip6_tables: zero-initialize fragment offset

[ Upstream commit 310e2d43c3ad429c1fba4b175806cf1f55ed73a6 ]

ip6tables only sets the `IP6T_F_PROTO` flag on a rule if a protocol is
specified (`-p tcp`, for example).  However, if the flag is not set,
`ip6_packet_match` doesn't call `ipv6_find_hdr` for the skb, in which
case the fragment offset is left uninitialized and a garbage value is
passed to each matcher.

Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: apple: Fix logical maximum and usage maximum of Magic Keyboard JIS

[ Upstream commit 67fd71ba16a37c663d139f5ba5296f344d80d072 ]

Apple Magic Keyboard(JIS)'s Logical Maximum and Usage Maximum are wrong.

Below is a report descriptor.

0x05, 0x01,         /*  Usage Page (Desktop),                           */
0x09, 0x06,         /*  Usage (Keyboard),                               */
0xA1, 0x01,         /*  Collection (Application),                       */
0x85, 0x01,         /*      Report ID (1),                              */
0x05, 0x07,         /*      Usage Page (Keyboard),                      */
0x15, 0x00,         /*      Logical Minimum (0),                        */
0x25, 0x01,         /*      Logical Maximum (1),                        */
0x19, 0xE0,         /*      Usage Minimum (KB Leftcontrol),             */
0x29, 0xE7,         /*      Usage Maximum (KB Right GUI),               */
0x75, 0x01,         /*      Report Size (1),                            */
0x95, 0x08,         /*      Report Count (8),                           */
0x81, 0x02,         /*      Input (Variable),                           */
0x95, 0x05,         /*      Report Count (5),                           */
0x75, 0x01,         /*      Report Size (1),                            */
0x05, 0x08,         /*      Usage Page (LED),                           */
0x19, 0x01,         /*      Usage Minimum (01h),                        */
0x29, 0x05,         /*      Usage Maximum (05h),                        */
0x91, 0x02,         /*      Output (Variable),                          */
0x95, 0x01,         /*      Report Count (1),                           */
0x75, 0x03,         /*      Report Size (3),                            */
0x91, 0x03,         /*      Output (Constant, Variable),                */
0x95, 0x08,         /*      Report Count (8),                           */
0x75, 0x01,         /*      Report Size (1),                            */
0x15, 0x00,         /*      Logical Minimum (0),                        */
0x25, 0x01,         /*      Logical Maximum (1),                        */

here is a report descriptor which is parsed one in kernel.
see sys/kernel/debug/hid/<dev>/rdesc

05 01 09 06 a1 01 85 01 05 07
15 00 25 01 19 e0 29 e7 75 01
95 08 81 02 95 05 75 01 05 08
19 01 29 05 91 02 95 01 75 03
91 03 95 08 75 01 15 00 25 01
06 00 ff 09 03 81 03 95 06 75
08 15 00 25 [65] 05 07 19 00 29
[65] 81 00 95 01 75 01 15 00 25
01 05 0c 09 b8 81 02 95 01 75
01 06 01 ff 09 03 81 02 95 01
75 06 81 03 06 02 ff 09 55 85
55 15 00 26 ff 00 75 08 95 40
b1 a2 c0 06 00 ff 09 14 a1 01
85 90 05 84 75 01 95 03 15 00
25 01 09 61 05 85 09 44 09 46
81 02 95 05 81 01 75 08 95 01
15 00 26 ff 00 09 65 81 02 c0
00

Position 64(Logical Maximum) and 70(Usage Maximum) are 101.
Both should be 0xE7 to support JIS specific keys(ろ, Eisu, Kana, |) support.
position 117 is also 101 but not related(it is Usage 65h).

There are no difference of product id between JIS and ANSI.
They are same 0x0267.

Signed-off-by: Mizuho Mori <morimolymoly@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: sof_sdw: tag SoundWire BEs as non-atomic

[ Upstream commit 58eafe1ff52ee1ce255759fc15729519af180cbb ]

The SoundWire BEs make use of 'stream' functions for .prepare and
.trigger. These functions will in turn force a Bank Switch, which
implies a wait operation.

Mark SoundWire BEs as nonatomic for consistency, but keep all other
types of BEs as is. The initialization of .nonatomic is done outside
of the create_sdw_dailink helper to avoid adding more parameters to
deal with a single exception to the rule that BEs are atomic.

Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Link: https://lore.kernel.org/r/20210907184436.33152-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: correct the error path of ext4_write_inline_data_end()

[ Upstream commit 55ce2f649b9e88111270333a8127e23f4f8f42d7 ]

Current error path of ext4_write_inline_data_end() is not correct.

Firstly, it should pass out the error value if ext4_get_inode_loc()
return fail, or else it could trigger infinite loop if we inject error
here. And then it's better to add inode to orphan list if it return fail
in ext4_journal_stop(), otherwise we could not restore inline xattr
entry after power failure. Finally, we need to reset the 'ret' value if
ext4_write_inline_data_end() return success in ext4_write_end() and
ext4_journalled_write_end(), otherwise we could not get the error return
value of ext4_journal_stop().

Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210716122024.1105856-3-yi.zhang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: check and update i_disksize properly

[ Upstream commit 4df031ff5876d94b48dd9ee486ba5522382a06b2 ]

After commit 3da40c7b0898 ("ext4: only call ext4_truncate when size <=
isize"), i_disksize could always be updated to i_size in ext4_setattr(),
and we could sure that i_disksize <= i_size since holding inode lock and
if i_disksize < i_size there are delalloc writes pending in the range
upto i_size. If the end of the current write is <= i_size, there's no
need to touch i_disksize since writeback will push i_disksize upto
i_size eventually. So we can switch to check i_size instead of
i_disksize in ext4_da_write_end() when write to the end of the file.
we also could remove ext4_mark_inode_dirty() together because we defer
inode dirtying to generic_write_end() or ext4_da_write_inline_data_end().

Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210716122024.1105856-2-yi.zhang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: Make vcio a child of the firmware node

In order to resolve a potential startup order bug, the vcio driver has
been rewritten as a platform driver that depends on a DT node for
its instantiation and to locate the firmware driver.

Add that DT node.

See: https://github.com/raspberrypi/linux/issues/4620

Signed-off-by: Phil Elwell <phil@raspberrypi.com>

char: vcio: Rewrite as a firmware node child

The old vcio driver is a simple character device that manually locates
the firmware driver. Initialising it before the firmware driver causes
a failure, and no retries are attempted.

Rewrite vcio as a platform driver that depends on a DT node for its
instantiation and the location of the firmware driver, making use of
the miscdevice framework to reduce the code size.

N.B. Using miscdevice changes the udev SUBSYSTEM string, so a change
to the companion udev rule is required in order to continue to set
the correct device permissions, e.g.:

    KERNEL="vcio", GROUP="video", MODE="0660"

See: https://github.com/raspberrypi/linux/issues/4620

Signed-off-by: Phil Elwell <phil@raspberrypi.com>

rtc: pcf85063: Always clear EXT_TEST from set_time

Power-on reset after the insertion of a battery does not always complete
successfully, leading to corrupted register content. The EXT_TEST bit
will stop the clock from running, but currently the driver will never
recover.

Safely handle the erroneous state by clearing EXT_TEST as part of the
usual set_time method.

Signed-off-by: Phil Elwell <phil@raspberrypi.com>

ARM: dts: Give sdhost a firmware reference

Using the rpi_firmware API as intended allows proper reference counting
of the firmware device and means we can remove a downstream patch to
the firmware driver.

Signed-off-by: Phil Elwell <phil@raspberrypi.com>

mmc: sdhost: Pass DT pointer to rpi_firmware_get

Using the rpi_firmware API as intended allows proper reference counting
of the firmware device and means we can remove a downstream patch to
the firmware driver.

Signed-off-by: Phil Elwell <phil@raspberrypi.com>

drivers/gpio: Add a driver that wraps the PWM API as a GPIO controller

For cases where spare PWM outputs are available, but are desired
to be addressed a standard outputs instead.
Wraps a PWM channel as a new GPIO chip with the one output.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

Merge remote-tracking branch 'stable/linux-5.10.y' into rpi-5.10.y

Merge tag 'v5.10.71' into rpi-5.10.y

This is the 5.10.71 stable release

Linux 5.10.69

Link: https://lore.kernel.org/r/20210924124334.228235870@linuxfoundation.org
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Link: https://lore.kernel.org/r/20210925120750.056868347@linuxfoundation.org
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Hulk Robot <hulkrobot@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/nvkm: Replace -ENOSYS with -ENODEV

commit e8f71f89236ef82d449991bfbc237e3cb6ea584f upstream.

nvkm test builds fail with the following error.

  drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c: In function 'nvkm_control_mthd_pstate_info':
  drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c:60:35: error: overflow in conversion from 'int' to '__s8' {aka 'signed char'} changes value from '-251' to '5'

The code builds on most architectures, but fails on parisc where ENOSYS
is defined as 251.

Replace the error code with -ENODEV (-19).  The actual error code does
not really matter and is not passed to userspace - it just has to be
negative.

Fixes: 7238eca4cf18 ("drm/nouveau: expose pstate selection per-power source in sysfs")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/idle: Make the idle timer expire in hard interrupt context

[ Upstream commit 9848417926353daa59d2b05eb26e185063dbac6e ]

The intel powerclamp driver will setup a per-CPU worker with RT
priority. The worker will then invoke play_idle() in which it remains in
the idle poll loop until it is stopped by the timer it started earlier.

That timer needs to expire in hard interrupt context on PREEMPT_RT.
Otherwise the timer will expire in ksoftirqd as a SOFT timer but that task
won't be scheduled on the CPU because its priority is lower than the
priority of the worker which is in the idle loop.

Always expire the idle timer in hard interrupt context.

Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210906113034.jgfxrjdvxnjqgtmc@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: rx8010: select REGMAP_I2C

[ Upstream commit 0c45d3e24ef3d3d87c5e0077b8f38d1372af7176 ]

The rtc-rx8010 uses the I2C regmap but doesn't select it in Kconfig so
depending on the configuration the build may fail. Fix it.

Signed-off-by: Yu-Tung Chang <mtwget@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210830052532.40356-1-mtwget@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

blk-mq: allow 4x BLK_MAX_REQUEST_COUNT at blk_plug for multiple_queues

[ Upstream commit 7f2a6a69f7ced6db8220298e0497cf60482a9d4b ]

Limiting number of request to BLK_MAX_REQUEST_COUNT at blk_plug hurts
performance for large md arrays. [1] shows resync speed of md array drops
for md array with more than 16 HDDs.

Fix this by allowing more request at plug queue. The multiple_queue flag
is used to only apply higher limit to multiple queue cases.

[1] https://lore.kernel.org/linux-raid/CAFDAVznS71BXW8Jxv6k9dXc2iR3ysX3iZRBww_rzA8WifBFxGg@mail.gmail.com/
Tested-by: Marcin Wanat <marcin.wanat@gmail.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

blk-throttle: fix UAF by deleteing timer in blk_throtl_exit()

[ Upstream commit 884f0e84f1e3195b801319c8ec3d5774e9bf2710 ]

The pending timer has been set up in blk_throtl_init(). However, the
timer is not deleted in blk_throtl_exit(). This means that the timer
handler may still be running after freeing the timer, which would
result in a use-after-free.

Fix by calling del_timer_sync() to delete the timer in blk_throtl_exit().

Signed-off-by: Li Jinlin <lijinlin3@huawei.com>
Link: https://lore.kernel.org/r/20210907121242.2885564-1-lijinlin3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: stm32-lp: Don't modify HW state in .remove() callback

[ Upstream commit d44084c93427bb0a9261432db1a8ca76a42d805e ]

A consumer is expected to disable a PWM before calling pwm_put(). And if
they didn't there is hopefully a good reason (or the consumer needs
fixing). Also if disabling an enabled PWM was the right thing to do,
this should better be done in the framework instead of in each low level
driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: rockchip: Don't modify HW state in .remove() callback

[ Upstream commit 9d768cd7fd42bb0be16f36aec48548fca5260759 ]

A consumer is expected to disable a PWM before calling pwm_put(). And if
they didn't there is hopefully a good reason (or the consumer needs
fixing). Also if disabling an enabled PWM was the right thing to do,
this should better be done in the framework instead of in each low level
driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: img: Don't modify HW state in .remove() callback

[ Upstream commit c68eb29c8e9067c08175dd0414f6984f236f719d ]

A consumer is expected to disable a PWM before calling pwm_put(). And if
they didn't there is hopefully a good reason (or the consumer needs
fixing). Also if disabling an enabled PWM was the right thing to do,
this should better be done in the framework instead of in each low level
driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

habanalabs: add validity check for event ID received from F/W

[ Upstream commit a6c849012b0f51c674f52384bd9a4f3dc0a33c31 ]

Currently there is no validity check for event ID received from F/W,
Thus exposing driver to memory overrun.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group

[ Upstream commit 17243e1c3072b8417a5ebfc53065d0a87af7ca77 ]

kobject_put() should be used to cleanup the memory associated with the
kobject instead of kobject_del().  See the section "Kobject removal" of
"Documentation/core-api/kobject.rst".

Link: https://lkml.kernel.org/r/20210629022556.3985106-7-sunnanyong@huawei.com
Link: https://lkml.kernel.org/r/1625651306-10829-7-git-send-email-konishi.ryusuke@gmail.com
Signed-off-by: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group

[ Upstream commit b2fe39c248f3fa4bbb2a20759b4fdd83504190f7 ]

If kobject_init_and_add returns with error, kobject_put() is needed here
to avoid memory leak, because kobject_init_and_add may return error
without freeing the memory associated with the kobject it allocated.

Link: https://lkml.kernel.org/r/20210629022556.3985106-6-sunnanyong@huawei.com
Link: https://lkml.kernel.org/r/1625651306-10829-6-git-send-email-konishi.ryusuke@gmail.com
Signed-off-by: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group

[ Upstream commit a3e181259ddd61fd378390977a1e4e2316853afa ]

The kobject_put() should be used to cleanup the memory associated with the
kobject instead of kobject_del.  See the section "Kobject removal" of
"Documentation/core-api/kobject.rst".

Link: https://lkml.kernel.org/r/20210629022556.3985106-5-sunnanyong@huawei.com
Link: https://lkml.kernel.org/r/1625651306-10829-5-git-send-email-konishi.ryusuke@gmail.com
Signed-off-by: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group

[ Upstream commit 24f8cb1ed057c840728167dab33b32e44147c86f ]

If kobject_init_and_add return with error, kobject_put() is needed here to
avoid memory leak, because kobject_init_and_add may return error without
freeing the memory associated with the kobject it allocated.

Link: https://lkml.kernel.org/r/20210629022556.3985106-4-sunnanyong@huawei.com
Link: https://lkml.kernel.org/r/1625651306-10829-4-git-send-email-konishi.ryusuke@gmail.com
Signed-off-by: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nilfs2: fix NULL pointer in nilfs_##name##_attr_release

[ Upstream commit dbc6e7d44a514f231a64d9d5676e001b660b6448 ]

In nilfs_##name##_attr_release, kobj->parent should not be referenced
because it is a NULL pointer.  The release() method of kobject is always
called in kobject_put(kobj), in the implementation of kobject_put(), the
kobj->parent will be assigned as NULL before call the release() method.
So just use kobj to get the subgroups, which is more efficient and can fix
a NULL pointer reference problem.

Link: https://lkml.kernel.org/r/20210629022556.3985106-3-sunnanyong@huawei.com
Link: https://lkml.kernel.org/r/1625651306-10829-3-git-send-email-konishi.ryusuke@gmail.com
Signed-off-by: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nilfs2: fix memory leak in nilfs_sysfs_create_device_group

[ Upstream commit 5f5dec07aca7067216ed4c1342e464e7307a9197 ]

Patch series "nilfs2: fix incorrect usage of kobject".

This patchset from Nanyong Sun fixes memory leak issues and a NULL
pointer dereference issue caused by incorrect usage of kboject in nilfs2
sysfs implementation.

This patch (of 6):

Reported by syzkaller:

  BUG: memory leak
  unreferenced object 0xffff888100ca8988 (size 8):
  comm "syz-executor.1", pid 1930, jiffies 4294745569 (age 18.052s)
  hex dump (first 8 bytes):
  6c 6f 6f 70 31 00 ff ff loop1...
  backtrace:
    kstrdup+0x36/0x70 mm/util.c:60
    kstrdup_const+0x35/0x60 mm/util.c:83
    kvasprintf_const+0xf1/0x180 lib/kasprintf.c:48
    kobject_set_name_vargs+0x56/0x150 lib/kobject.c:289
    kobject_add_varg lib/kobject.c:384 [inline]
    kobject_init_and_add+0xc9/0x150 lib/kobject.c:473
    nilfs_sysfs_create_device_group+0x150/0x7d0 fs/nilfs2/sysfs.c:986
    init_nilfs+0xa21/0xea0 fs/nilfs2/the_nilfs.c:637
    nilfs_fill_super fs/nilfs2/super.c:1046 [inline]
    nilfs_mount+0x7b4/0xe80 fs/nilfs2/super.c:1316
    legacy_get_tree+0x105/0x210 fs/fs_context.c:592
    vfs_get_tree+0x8e/0x2d0 fs/super.c:1498
    do_new_mount fs/namespace.c:2905 [inline]
    path_mount+0xf9b/0x1990 fs/namespace.c:3235
    do_mount+0xea/0x100 fs/namespace.c:3248
    __do_sys_mount fs/namespace.c:3456 [inline]
    __se_sys_mount fs/namespace.c:3433 [inline]
    __x64_sys_mount+0x14b/0x1f0 fs/namespace.c:3433
    do_syscall_x64 arch/x86/entry/common.c:50 [inline]
    do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
    entry_SYSCALL_64_after_hwframe+0x44/0xae

If kobject_init_and_add return with error, then the cleanup of kobject
is needed because memory may be allocated in kobject_init_and_add
without freeing.

And the place of cleanup_dev_kobject should use kobject_put to free the
memory associated with the kobject.  As the section "Kobject removal" of
"Documentation/core-api/kobject.rst" says, kobject_del() just makes the
kobject "invisible", but it is not cleaned up.  And no more cleanup will
do after cleanup_dev_kobject, so kobject_put is needed here.

Link: https://lkml.kernel.org/r/1625651306-10829-1-git-send-email-konishi.ryusuke@gmail.com
Link: https://lkml.kernel.org/r/1625651306-10829-2-git-send-email-konishi.ryusuke@gmail.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Link: https://lkml.kernel.org/r/20210629022556.3985106-2-sunnanyong@huawei.com
Signed-off-by: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: fix lockdep warning while mounting sprout fs

[ Upstream commit c124706900c20dee70f921bb3a90492431561a0a ]

Following test case reproduces lockdep warning.

  Test case:

  $ mkfs.btrfs -f <dev1>
  $ btrfstune -S 1 <dev1>
  $ mount <dev1> <mnt>
  $ btrfs device add <dev2> <mnt> -f
  $ umount <mnt>
  $ mount <dev2> <mnt>
  $ umount <mnt>

The warning claims a possible ABBA deadlock between the threads
initiated by [#1] btrfs device add and [#0] the mount.

  [ 540.743122] WARNING: possible circular locking dependency detected
  [ 540.743129] 5.11.0-rc7+ #5 Not tainted
  [ 540.743135] ------------------------------------------------------
  [ 540.743142] mount/2515 is trying to acquire lock:
  [ 540.743149] ffffa0c5544c2ce0 (&fs_devs->device_list_mutex){+.+.}-{4:4}, at: clone_fs_devices+0x6d/0x210 [btrfs]
  [ 540.743458] but task is already holding lock:
  [ 540.743461] ffffa0c54a7932b8 (btrfs-chunk-00){++++}-{4:4}, at: __btrfs_tree_read_lock+0x32/0x200 [btrfs]
  [ 540.743541] which lock already depends on the new lock.
  [ 540.743543] the existing dependency chain (in reverse order) is:

  [ 540.743546] -> #1 (btrfs-chunk-00){++++}-{4:4}:
  [ 540.743566] down_read_nested+0x48/0x2b0
  [ 540.743585] __btrfs_tree_read_lock+0x32/0x200 [btrfs]
  [ 540.743650] btrfs_read_lock_root_node+0x70/0x200 [btrfs]
  [ 540.743733] btrfs_search_slot+0x6c6/0xe00 [btrfs]
  [ 540.743785] btrfs_update_device+0x83/0x260 [btrfs]
  [ 540.743849] btrfs_finish_chunk_alloc+0x13f/0x660 [btrfs] <--- device_list_mutex
  [ 540.743911] btrfs_create_pending_block_groups+0x18d/0x3f0 [btrfs]
  [ 540.743982] btrfs_commit_transaction+0x86/0x1260 [btrfs]
  [ 540.744037] btrfs_init_new_device+0x1600/0x1dd0 [btrfs]
  [ 540.744101] btrfs_ioctl+0x1c77/0x24c0 [btrfs]
  [ 540.744166] __x64_sys_ioctl+0xe4/0x140
  [ 540.744170] do_syscall_64+0x4b/0x80
  [ 540.744174] entry_SYSCALL_64_after_hwframe+0x44/0xa9

  [ 540.744180] -> #0 (&fs_devs->device_list_mutex){+.+.}-{4:4}:
  [ 540.744184] __lock_acquire+0x155f/0x2360
  [ 540.744188] lock_acquire+0x10b/0x5c0
  [ 540.744190] __mutex_lock+0xb1/0xf80
  [ 540.744193] mutex_lock_nested+0x27/0x30
  [ 540.744196] clone_fs_devices+0x6d/0x210 [btrfs]
  [ 540.744270] btrfs_read_chunk_tree+0x3c7/0xbb0 [btrfs]
  [ 540.744336] open_ctree+0xf6e/0x2074 [btrfs]
  [ 540.744406] btrfs_mount_root.cold.72+0x16/0x127 [btrfs]
  [ 540.744472] legacy_get_tree+0x38/0x90
  [ 540.744475] vfs_get_tree+0x30/0x140
  [ 540.744478] fc_mount+0x16/0x60
  [ 540.744482] vfs_kern_mount+0x91/0x100
  [ 540.744484] btrfs_mount+0x1e6/0x670 [btrfs]
  [ 540.744536] legacy_get_tree+0x38/0x90
  [ 540.744537] vfs_get_tree+0x30/0x140
  [ 540.744539] path_mount+0x8d8/0x1070
  [ 540.744541] do_mount+0x8d/0xc0
  [ 540.744543] __x64_sys_mount+0x125/0x160
  [ 540.744545] do_syscall_64+0x4b/0x80
  [ 540.744547] entry_SYSCALL_64_after_hwframe+0x44/0xa9

  [ 540.744551] other info that might help us debug this:
  [ 540.744552] Possible unsafe locking scenario:

  [ 540.744553] CPU0  CPU1
  [ 540.744554] ----  ----
  [ 540.744555] lock(btrfs-chunk-00);
  [ 540.744557]  lock(&fs_devs->device_list_mutex);
  [ 540.744560]  lock(btrfs-chunk-00);
  [ 540.744562] lock(&fs_devs->device_list_mutex);
  [ 540.744564]
   *** DEADLOCK ***

  [ 540.744565] 3 locks held by mount/2515:
  [ 540.744567] #0: ffffa0c56bf7a0e0 (&type->s_umount_key#42/1){+.+.}-{4:4}, at: alloc_super.isra.16+0xdf/0x450
  [ 540.744574] #1: ffffffffc05a9628 (uuid_mutex){+.+.}-{4:4}, at: btrfs_read_chunk_tree+0x63/0xbb0 [btrfs]
  [ 540.744640] #2: ffffa0c54a7932b8 (btrfs-chunk-00){++++}-{4:4}, at: __btrfs_tree_read_lock+0x32/0x200 [btrfs]
  [ 540.744708]
   stack backtrace:
  [ 540.744712] CPU: 2 PID: 2515 Comm: mount Not tainted 5.11.0-rc7+ #5

But the device_list_mutex in clone_fs_devices() is redundant, as
explained below.  Two threads [1]  and [2] (below) could lead to
clone_fs_device().

  [1]
  open_ctree <== mount sprout fs
   btrfs_read_chunk_tree()
    mutex_lock(&uuid_mutex) <== global lock
    read_one_dev()
     open_seed_devices()
      clone_fs_devices() <== seed fs_devices
       mutex_lock(&orig->device_list_mutex) <== seed fs_devices

  [2]
  btrfs_init_new_device() <== sprouting
   mutex_lock(&uuid_mutex); <== global lock
   btrfs_prepare_sprout()
     lockdep_assert_held(&uuid_mutex)
     clone_fs_devices(seed_fs_device) <== seed fs_devices

Both of these threads hold uuid_mutex which is sufficient to protect
getting the seed device(s) freed while we are trying to clone it for
sprouting [2] or mounting a sprout [1] (as above). A mounted seed device
can not free/write/replace because it is read-only. An unmounted seed
device can be freed by btrfs_free_stale_devices(), but it needs
uuid_mutex.  So this patch removes the unnecessary device_list_mutex in
clone_fs_devices().  And adds a lockdep_assert_held(&uuid_mutex) in
clone_fs_devices().

Reported-by: Su Yue <l@damenly.su>
Tested-by: Su Yue <l@damenly.su>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: update the bdev time directly when closing

[ Upstream commit 8f96a5bfa1503e0a5f3c78d51e993a1794d4aff1 ]

We update the ctime/mtime of a block device when we remove it so that
blkid knows the device changed.  However we do this by re-opening the
block device and calling filp_update_time.  This is more correct because
it'll call the inode->i_op->update_time if it exists, but the block dev
inodes do not do this.  Instead call generic_update_time() on the
bd_inode in order to avoid the blkdev_open path and get rid of the
following lockdep splat:

======================================================
WARNING: possible circular locking dependency detected
5.14.0-rc2+ #406 Not tainted
------------------------------------------------------
losetup/11596 is trying to acquire lock:
ffff939640d2f538 ((wq_completion)loop0){+.+.}-{0:0}, at: flush_workqueue+0x67/0x5e0

but task is already holding lock:
ffff939655510c68 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x660 [loop]

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #4 (&lo->lo_mutex){+.+.}-{3:3}:
       __mutex_lock+0x7d/0x750
       lo_open+0x28/0x60 [loop]
       blkdev_get_whole+0x25/0xf0
       blkdev_get_by_dev.part.0+0x168/0x3c0
       blkdev_open+0xd2/0xe0
       do_dentry_open+0x161/0x390
       path_openat+0x3cc/0xa20
       do_filp_open+0x96/0x120
       do_sys_openat2+0x7b/0x130
       __x64_sys_openat+0x46/0x70
       do_syscall_64+0x38/0x90
       entry_SYSCALL_64_after_hwframe+0x44/0xae

-> #3 (&disk->open_mutex){+.+.}-{3:3}:
       __mutex_lock+0x7d/0x750
       blkdev_get_by_dev.part.0+0x56/0x3c0
       blkdev_open+0xd2/0xe0
       do_dentry_open+0x161/0x390
       path_openat+0x3cc/0xa20
       do_filp_open+0x96/0x120
       file_open_name+0xc7/0x170
       filp_open+0x2c/0x50
       btrfs_scratch_superblocks.part.0+0x10f/0x170
       btrfs_rm_device.cold+0xe8/0xed
       btrfs_ioctl+0x2a31/0x2e70
       __x64_sys_ioctl+0x80/0xb0
       do_syscall_64+0x38/0x90
       entry_SYSCALL_64_after_hwframe+0x44/0xae

-> #2 (sb_writers#12){.+.+}-{0:0}:
       lo_write_bvec+0xc2/0x240 [loop]
       loop_process_work+0x238/0xd00 [loop]
       process_one_work+0x26b/0x560
       worker_thread+0x55/0x3c0
       kthread+0x140/0x160
       ret_from_fork+0x1f/0x30

-> #1 ((work_completion)(&lo->rootcg_work)){+.+.}-{0:0}:
       process_one_work+0x245/0x560
       worker_thread+0x55/0x3c0
       kthread+0x140/0x160
       ret_from_fork+0x1f/0x30

-> #0 ((wq_completion)loop0){+.+.}-{0:0}:
       __lock_acquire+0x10ea/0x1d90
       lock_acquire+0xb5/0x2b0
       flush_workqueue+0x91/0x5e0
       drain_workqueue+0xa0/0x110
       destroy_workqueue+0x36/0x250
       __loop_clr_fd+0x9a/0x660 [loop]
       block_ioctl+0x3f/0x50
       __x64_sys_ioctl+0x80/0xb0
       do_syscall_64+0x38/0x90
       entry_SYSCALL_64_after_hwframe+0x44/0xae

other info that might help us debug this:

Chain exists of:
  (wq_completion)loop0 --> &disk->open_mutex --> &lo->lo_mutex

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&lo->lo_mutex);
                               lock(&disk->open_mutex);
                               lock(&lo->lo_mutex);
  lock((wq_completion)loop0);

 *** DEADLOCK ***

1 lock held by losetup/11596:
 #0: ffff939655510c68 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x660 [loop]

stack backtrace:
CPU: 1 PID: 11596 Comm: losetup Not tainted 5.14.0-rc2+ #406
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
Call Trace:
 dump_stack_lvl+0x57/0x72
 check_noncircular+0xcf/0xf0
 ? stack_trace_save+0x3b/0x50
 __lock_acquire+0x10ea/0x1d90
 lock_acquire+0xb5/0x2b0
 ? flush_workqueue+0x67/0x5e0
 ? lockdep_init_map_type+0x47/0x220
 flush_workqueue+0x91/0x5e0
 ? flush_workqueue+0x67/0x5e0
 ? verify_cpu+0xf0/0x100
 drain_workqueue+0xa0/0x110
 destroy_workqueue+0x36/0x250
 __loop_clr_fd+0x9a/0x660 [loop]
 ? blkdev_ioctl+0x8d/0x2a0
 block_ioctl+0x3f/0x50
 __x64_sys_ioctl+0x80/0xb0
 do_syscall_64+0x38/0x90
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ceph: lockdep annotations for try_nonblocking_invalidate

[ Upstream commit 3eaf5aa1cfa8c97c72f5824e2e9263d6cc977b03 ]

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ceph: remove the capsnaps when removing caps

[ Upstream commit a6d37ccdd240e80f26aaea0e62cda310e0e184d7 ]

capsnaps will take inode references via ihold when queueing to flush.
When force unmounting, the client will just close the sessions and
may never get a flush reply, causing a leak and inode ref leak.

Fix this by removing the capsnaps for an inode when removing the caps.

URL: https://tracker.ceph.com/issues/52295
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ceph: request Fw caps before updating the mtime in ceph_write_iter

[ Upstream commit b11ed50346683a749632ea664959b28d524d7395 ]

The current code will update the mtime and then try to get caps to
handle the write. If we end up having to request caps from the MDS, then
the mtime in the cap grant will clobber the updated mtime and it'll be
lost.

This is most noticable when two clients are alternately writing to the
same file. Fw caps are continually being granted and revoked, and the
mtime ends up stuck because the updated mtimes are always being
overwritten with the old one.

Fix this by changing the order of operations in ceph_write_iter to get
the caps before updating the times. Also, make sure we check the pool
full conditions before even getting any caps or uninlining.

URL: https://tracker.ceph.com/issues/46574
Reported-by: Jozef Kováč <kovac@firma.zoznam.sk>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Luis Henriques <lhenriques@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: xilinx_dma: Set DMA mask for coherent APIs

[ Upstream commit aac6c0f90799d66b8989be1e056408f33fd99fe6 ]

The xilinx dma driver uses the consistent allocations, so for correct
operation also set the DMA mask for coherent APIs. It fixes the below
kernel crash with dmatest client when DMA IP is configured with 64-bit
address width and linux is booted from high (>4GB) memory.

Call trace:
[  489.531257]  dma_alloc_from_pool+0x8c/0x1c0
[  489.535431]  dma_direct_alloc+0x284/0x330
[  489.539432]  dma_alloc_attrs+0x80/0xf0
[  489.543174]  dma_pool_alloc+0x160/0x2c0
[  489.547003]  xilinx_cdma_prep_memcpy+0xa4/0x180
[  489.551524]  dmatest_func+0x3cc/0x114c
[  489.555266]  kthread+0x124/0x130
[  489.558486]  ret_from_fork+0x10/0x3c
[  489.562051] ---[ end trace 248625b2d596a90a ]---

Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Reviewed-by: Harini Katakam <harini.katakam@xilinx.com>
Link: https://lore.kernel.org/r/1629363528-30347-1-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: ioat: depends on !UML

[ Upstream commit bbac7a92a46f0876e588722ebe552ddfe6fd790f ]

Now that UML has PCI support, this driver must depend also on
!UML since it pokes at X86_64 architecture internals that don't
exist on ARCH=um.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20210809112409.a3a0974874d2.I2ffe3d11ed37f735da2f39884a74c953b258b995@changeid
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: sprd: Add missing MODULE_DEVICE_TABLE

[ Upstream commit 4faee8b65ec32346f8096e64c5fa1d5a73121742 ]

This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Link: https://lore.kernel.org/r/1620094977-70146-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: idxd: depends on !UML

[ Upstream commit b2296eeac91555bd13f774efa7ab7d4b12fb71ef ]

Now that UML has PCI support, this driver must depend also on
!UML since it pokes at X86_64 architecture internals that don't
exist on ARCH=um.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Link: https://lore.kernel.org/r/20210625103810.fe877ae0aef4.If240438e3f50ae226f3f755fc46ea498c6858393@changeid
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/amd: Relocate GAMSup check to early_enable_iommus

[ Upstream commit c3811a50addd23b9bb5a36278609ee1638debcf6 ]

Currently, iommu_init_ga() checks and disables IOMMU VAPIC support
(i.e. AMD AVIC support in IOMMU) when GAMSup feature bit is not set.
However it forgets to clear IRQ_POSTING_CAP from the previously set
amd_iommu_irq_ops.capability.

This triggers an invalid page fault bug during guest VM warm reboot
if AVIC is enabled since the irq_remapping_cap(IRQ_POSTING_CAP) is
incorrectly set, and crash the system with the following kernel trace.

    BUG: unable to handle page fault for address: 0000000000400dd8
    RIP: 0010:amd_iommu_deactivate_guest_mode+0x19/0xbc
    Call Trace:
     svm_set_pi_irte_mode+0x8a/0xc0 [kvm_amd]
     ? kvm_make_all_cpus_request_except+0x50/0x70 [kvm]
     kvm_request_apicv_update+0x10c/0x150 [kvm]
     svm_toggle_avic_for_irq_window+0x52/0x90 [kvm_amd]
     svm_enable_irq_window+0x26/0xa0 [kvm_amd]
     vcpu_enter_guest+0xbbe/0x1560 [kvm]
     ? avic_vcpu_load+0xd5/0x120 [kvm_amd]
     ? kvm_arch_vcpu_load+0x76/0x240 [kvm]
     ? svm_get_segment_base+0xa/0x10 [kvm_amd]
     kvm_arch_vcpu_ioctl_run+0x103/0x590 [kvm]
     kvm_vcpu_ioctl+0x22a/0x5d0 [kvm]
     __x64_sys_ioctl+0x84/0xc0
     do_syscall_64+0x33/0x40
     entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes by moving the initializing of AMD IOMMU interrupt remapping mode
(amd_iommu_guest_ir) earlier before setting up the
amd_iommu_irq_ops.capability with appropriate IRQ_POSTING_CAP flag.

[joro: Squashed the two patches and limited
check_features_on_all_iommus() to CONFIG_IRQ_REMAP
to fix a compile warning.]

Signed-off-by: Wei Huang <wei.huang2@amd.com>
Co-developed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20210820202957.187572-2-suravee.suthikulpanit@amd.com
Link: https://lore.kernel.org/r/20210820202957.187572-3-suravee.suthikulpanit@amd.com
Fixes: 8bda0cfbdc1a ("iommu/amd: Detect and initialize guest vAPIC log")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

parisc: Move pci_dev_is_behind_card_dino to where it is used

[ Upstream commit 907872baa9f1538eed02ec737b8e89eba6c6e4b9 ]

parisc build test images fail to compile with the following error.

drivers/parisc/dino.c:160:12: error:
'pci_dev_is_behind_card_dino' defined but not used

Move the function just ahead of its only caller to avoid the error.

Fixes: 5fa1659105fa ("parisc: Disable HP HSC-PCI Cards to prevent kernel crash")
Cc: Helge Deller <deller@gmx.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dma-buf: DMABUF_MOVE_NOTIFY should depend on DMA_SHARED_BUFFER

[ Upstream commit c4f3a3460a5daebc772d9263500e4099b11e7300 ]

Move notify between drivers is an option of DMA-BUF.  Enabling
DMABUF_MOVE_NOTIFY without DMA_SHARED_BUFFER does not have any impact,
as drivers/dma-buf/ is not entered during the build when
DMA_SHARED_BUFFER is disabled.

Fixes: bb42df4662a44765 ("dma-buf: add dynamic DMA-buf handling v15")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210902124913.2698760-2-geert@linux-m68k.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers: base: cacheinfo: Get rid of DEFINE_SMP_CALL_CACHE_FUNCTION()

[ Upstream commit 4b92d4add5f6dcf21275185c997d6ecb800054cd ]

DEFINE_SMP_CALL_CACHE_FUNCTION() was usefel before the CPU hotplug rework
to ensure that the cache related functions are called on the upcoming CPU
because the notifier itself could run on any online CPU.

The hotplug state machine guarantees that the callbacks are invoked on the
upcoming CPU. So there is no need to have this SMP function call
obfuscation. That indirection was missed when the hotplug notifiers were
converted.

This also solves the problem of ARM64 init_cache_level() invoking ACPI
functions which take a semaphore in that context. That's invalid as SMP
function calls run with interrupts disabled. Running it just from the
callback in context of the CPU hotplug thread solves this.

Fixes: 8571890e1513 ("arm64: Add support for ACPI based firmware tables")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/871r69ersb.ffs@tglx
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Disable PCIE_DPM on Intel RKL Platform

[ Upstream commit b3dc549986eb7b38eba4a144e979dc93f386751f ]

Due to high latency in PCIE clock switching on RKL platforms,
switching the PCIE clock dynamically at runtime can lead to HDMI/DP
audio problems. On newer asics this is handled in the SMU firmware.
For SMU7-based asics, disable PCIE clock switching to avoid the issue.

AMD provide a parameter to disable PICE_DPM.

modprobe amdgpu ppfeaturemask=0xfff7bffb

It's better to contorl PCIE_DPM in amd gpu driver,
switch PCI_DPM by determining intel RKL platform for SMU7-based asics.

Fixes: 1a31474cdb48 ("drm/amd/pm: workaround for audio noise issue")
Ref: https://lists.freedesktop.org/archives/amd-gfx/2021-August/067413.html
Signed-off-by: Koba Ko <koba.ko@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

thermal/core: Fix thermal_cooling_device_register() prototype

[ Upstream commit fb83610762dd5927212aa62a468dd3b756b57a88 ]

There are two pairs of declarations for thermal_cooling_device_register()
and thermal_of_cooling_device_register(), and only one set was changed
in a recent patch, so the other one now causes a compile-time warning:

drivers/net/wireless/mediatek/mt76/mt7915/init.c: In function 'mt7915_thermal_init':
drivers/net/wireless/mediatek/mt76/mt7915/init.c:134:48: error: passing argument 1 of 'thermal_cooling_device_register' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]
  134 |         cdev = thermal_cooling_device_register(wiphy_name(wiphy), phy,
      |                                                ^~~~~~~~~~~~~~~~~
In file included from drivers/net/wireless/mediatek/mt76/mt7915/init.c:7:
include/linux/thermal.h:407:39: note: expected 'char *' but argument is of type 'const char *'
  407 | thermal_cooling_device_register(char *type, void *devdata,
      |                                 ~~~~~~^~~~

Change the dummy helper functions to have the same arguments as the
normal version.

Fixes: f991de53a8ab ("thermal: make device_register's type argument const")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210722090717.1116748-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools/bootconfig: Fix tracing_on option checking in ftrace2bconf.sh

[ Upstream commit 32ba9f0fb027cc43074e3ea26fcf831adeee8e03 ]

Since tracing_on indicates only "1" (default) or "0", ftrace2bconf.sh
only need to check the value is "0".

Link: https://lkml.kernel.org/r/163077087144.222577.6888011847727968737.stgit@devnote2
Fixes: 55ed4560774d ("tools/bootconfig: Add tracing_on support to helper scripts")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCH

[ Upstream commit 6fe26259b4884b657cbc233fb9cdade9d704976e ]

Commit 05a4a9527931 ("kernel/watchdog: split up config options") adds a
new config HARDLOCKUP_DETECTOR, which selects the non-existing config
HARDLOCKUP_DETECTOR_ARCH.

Hence, ./scripts/checkkconfigsymbols.py warns:

HARDLOCKUP_DETECTOR_ARCH Referencing files: lib/Kconfig.debug

Simply drop selecting the non-existing HARDLOCKUP_DETECTOR_ARCH.

Link: https://lkml.kernel.org/r/20210806115618.22088-1-lukas.bulwahn@gmail.com
Fixes: 05a4a9527931 ("kernel/watchdog: split up config options")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Babu Moger <babu.moger@oracle.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ceph: cancel delayed work instead of flushing on mdsc teardown

[ Upstream commit b4002173b7989588b6feaefc42edaf011b596782 ]

The first thing metric_delayed_work does is check mdsc->stopping,
and then return immediately if it's set. That's good since we would
have already torn down the metric structures at this point, otherwise,
but there is no locking around mdsc->stopping.

It's possible that the ceph_metric_destroy call could race with the
delayed_work, in which case we could end up with the delayed_work
accessing destroyed percpu variables.

At this point in the mdsc teardown, the "stopping" flag has already been
set, so there's no benefit to flushing the work. Move the work
cancellation in ceph_metric_destroy ahead of the percpu variable
destruction, and eliminate the flush_delayed_work call in
ceph_mdsc_destroy.

Fixes: 18f473b384a6 ("ceph: periodically send perf metrics to MDSes")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ceph: allow ceph_put_mds_session to take NULL or ERR_PTR

[ Upstream commit 7e65624d32b6e0429b1d3559e5585657f34f74a1 ]

...to simplify some error paths.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Luis Henriques <lhenriques@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/chrome: cros_ec_trace: Fix format warnings

[ Upstream commit 4665584888ad2175831c972c004115741ec799e9 ]

Fix printf format issues in new tracing events.

Fixes: 814318242687 ("platform/chrome: cros_ec_trace: Add fields to command traces")

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Link: https://lore.kernel.org/r/20210830180050.2077261-1-gwendal@chromium.org
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/chrome: sensorhub: Add trace events for sample

[ Upstream commit d453ceb6549af8798913de6a20444cb7200fdb69 ]

Add trace event to report samples and their timestamp coming from the
EC. It allows to check if the timestamps are correct and the filter is
working correctly without introducing too much latency.

To enable these events:

cd /sys/kernel/debug/tracing/
echo 1 > events/cros_ec/enable
echo 0 > events/cros_ec/cros_ec_request_start/enable
echo 0 > events/cros_ec/cros_ec_request_done/enable
echo 1 > tracing_on
cat trace_pipe
Observe event flowing:
irq/105-chromeo-95      [000] ....   613.659758: cros_ec_sensorhub_timestamp: ...
irq/105-chromeo-95      [000] ....   613.665219: cros_ec_sensorhub_filter: dx: ...

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: idxd: fix wq slot allocation index check

[ Upstream commit 673d812d30be67942762bb9e8548abb26a3ba4a7 ]

The sbitmap wait and allocate routine checks the index that is returned
from sbitmap_queue_get(). It should be idxd >= 0 as 0 is also a valid
index. This fixes issue where submission path hangs when WQ size is 1.

Fixes: 0705107fcc80 ("dmaengine: idxd: move submission to sbitmap_queue")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162697645067.3478714.506720687816951762.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: mxs: Don't modify HW state in .probe() after the PWM chip was registered

commit 020162d6f49f2963062229814a56a89c86cbeaa8 upstream.

This fixes a race condition: After pwmchip_add() is called there might
already be a consumer and then modifying the hardware behind the
consumer's back is bad. So reset before calling pwmchip_add().

Note that reseting the hardware isn't the right thing to do if the PWM
is already running as it might e.g. disable (or even enable) a backlight
that is supposed to be on (or off).

Fixes: 4dce82c1e840 ("pwm: add pwm-mxs support")
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pwm: lpc32xx: Don't modify HW state in .probe() after the PWM chip was registered

commit 3d2813fb17e5fd0d73c1d1442ca0192bde4af10e upstream.

This fixes a race condition: After pwmchip_add() is called there might
already be a consumer and then modifying the hardware behind the
consumer's back is bad. So set the default before.

(Side-note: I don't know what this register setting actually does, if
this modifies the polarity there is an inconsistency because the
inversed polarity isn't considered if the PWM is already running during
.probe().)

Fixes: acfd92fdfb93 ("pwm: lpc32xx: Set PWM_PIN_LEVEL bit to default value")
Cc: Sylvain Lemieux <slemieux@tycoint.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM: sleep: core: Avoid setting power.must_resume to false

commit 4a9344cd0aa4499beb3772bbecb40bb78888c0e1 upstream.

There are variables(power.may_skip_resume and dev->power.must_resume)
and DPM_FLAG_MAY_SKIP_RESUME flags to control the resume of devices after
a system wide suspend transition.

Setting the DPM_FLAG_MAY_SKIP_RESUME flag means that the driver allows
its "noirq" and "early" resume callbacks to be skipped if the device
can be left in suspend after a system-wide transition into the working
state. PM core determines that the driver's "noirq" and "early" resume
callbacks should be skipped or not with dev_pm_skip_resume() function by
checking power.may_skip_resume variable.

power.must_resume variable is getting set to false in __device_suspend()
function without checking device's DPM_FLAG_MAY_SKIP_RESUME settings.
In problematic scenario, where all the devices in the suspend_late
stage are successful and some device can fail to suspend in
suspend_noirq phase. So some devices successfully suspended in suspend_late
stage are not getting chance to execute __device_suspend_noirq()
to set dev->power.must_resume variable to true and not getting
resumed in early_resume phase.

Add a check for device's DPM_FLAG_MAY_SKIP_RESUME flag before
setting power.must_resume variable in __device_suspend function.

Fixes: 6e176bf8d461 ("PM: sleep: core: Do not skip callbacks in the resume phase")
Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

profiling: fix shift-out-of-bounds bugs

commit 2d186afd04d669fe9c48b994c41a7405a3c9f16d upstream.

Syzbot reported shift-out-of-bounds bug in profile_init().
The problem was in incorrect prof_shift. Since prof_shift value comes from
userspace we need to clamp this value into [0, BITS_PER_LONG -1]
boundaries.

Second possible shiht-out-of-bounds was found by Tetsuo:
sample_step local variable in read_profile() had "unsigned int" type,
but prof_shift allows to make a BITS_PER_LONG shift. So, to prevent
possible shiht-out-of-bounds sample_step type was changed to
"unsigned long".

Also, "unsigned short int" will be sufficient for storing
[0, BITS_PER_LONG] value, that's why there is no need for
"unsigned long" prof_shift.

Link: https://lkml.kernel.org/r/20210813140022.5011-1-paskripkin@gmail.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-and-tested-by: syzbot+e68c89a9510c159d9684@syzkaller.appspotmail.com
Suggested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nilfs2: use refcount_dec_and_lock() to fix potential UAF

commit 98e2e409e76ef7781d8511f997359e9c504a95c1 upstream.

When the refcount is decreased to 0, the resource reclamation branch is
entered.  Before CPU0 reaches the race point (1), CPU1 may obtain the
spinlock and traverse the rbtree to find 'root', see
nilfs_lookup_root().

Although CPU1 will call refcount_inc() to increase the refcount, it is
obviously too late.  CPU0 will release 'root' directly, CPU1 then
accesses 'root' and triggers UAF.

Use refcount_dec_and_lock() to ensure that both the operations of
decrease refcount to 0 and link deletion are lock protected eliminates
this risk.

     CPU0                      CPU1
nilfs_put_root():
    <-------- (1)
spin_lock(&nilfs->ns_cptree_lock);
rb_erase(&root->rb_node, &nilfs->ns_cptree);
spin_unlock(&nilfs->ns_cptree_lock);

kfree(root);
    <-------- use-after-free

  refcount_t: underflow; use-after-free.
  WARNING: CPU: 2 PID: 9476 at lib/refcount.c:28 \
  refcount_warn_saturate+0x1cf/0x210 lib/refcount.c:28
  Modules linked in:
  CPU: 2 PID: 9476 Comm: syz-executor.0 Not tainted 5.10.45-rc1+ #3
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ...
  RIP: 0010:refcount_warn_saturate+0x1cf/0x210 lib/refcount.c:28
  ... ...
  Call Trace:
     __refcount_sub_and_test include/linux/refcount.h:283 [inline]
     __refcount_dec_and_test include/linux/refcount.h:315 [inline]
     refcount_dec_and_test include/linux/refcount.h:333 [inline]
     nilfs_put_root+0xc1/0xd0 fs/nilfs2/the_nilfs.c:795
     nilfs_segctor_destroy fs/nilfs2/segment.c:2749 [inline]
     nilfs_detach_log_writer+0x3fa/0x570 fs/nilfs2/segment.c:2812
     nilfs_put_super+0x2f/0xf0 fs/nilfs2/super.c:467
     generic_shutdown_super+0xcd/0x1f0 fs/super.c:464
     kill_block_super+0x4a/0x90 fs/super.c:1446
     deactivate_locked_super+0x6a/0xb0 fs/super.c:335
     deactivate_super+0x85/0x90 fs/super.c:366
     cleanup_mnt+0x277/0x2e0 fs/namespace.c:1118
     __cleanup_mnt+0x15/0x20 fs/namespace.c:1125
     task_work_run+0x8e/0x110 kernel/task_work.c:151
     tracehook_notify_resume include/linux/tracehook.h:188 [inline]
     exit_to_user_mode_loop kernel/entry/common.c:164 [inline]
     exit_to_user_mode_prepare+0x13c/0x170 kernel/entry/common.c:191
     syscall_exit_to_user_mode+0x16/0x30 kernel/entry/common.c:266
     do_syscall_64+0x45/0x80 arch/x86/entry/common.c:56
     entry_SYSCALL_64_after_hwframe+0x44/0xa9

There is no reproduction program, and the above is only theoretical
analysis.

Link: https://lkml.kernel.org/r/1629859428-5906-1-git-send-email-konishi.ryusuke@gmail.com
Fixes: ba65ae4729bf ("nilfs2: add checkpoint tree to nilfs object")
Link: https://lkml.kernel.org/r/20210723012317.4146-1-thunder.leizhen@huawei.com
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

prctl: allow to setup brk for et_dyn executables

commit e1fbbd073137a9d63279f6bf363151a938347640 upstream.

Keno Fischer reported that when a binray loaded via ld-linux-x the
prctl(PR_SET_MM_MAP) doesn't allow to setup brk value because it lays
before mm:end_data.

For example a test program shows

 | # ~/t
 |
 | start_code      401000
 | end_code        401a15
 | start_stack     7ffce4577dd0
 | start_data    403e10
 | end_data        40408c
 | start_brk    b5b000
 | sbrk(0)         b5b000

and when executed via ld-linux

 | # /lib64/ld-linux-x86-64.so.2 ~/t
 |
 | start_code      7fc25b0a4000
 | end_code        7fc25b0c4524
 | start_stack     7fffcc6b2400
 | start_data    7fc25b0ce4c0
 | end_data        7fc25b0cff98
 | start_brk    55555710c000
 | sbrk(0)         55555710c000

This of course prevent criu from restoring such programs.  Looking into
how kernel operates with brk/start_brk inside brk() syscall I don't see
any problem if we allow to setup brk/start_brk without checking for
end_data.  Even if someone pass some weird address here on a purpose then
the worst possible result will be an unexpected unmapping of existing vma
(own vma, since prctl works with the callers memory) but test for
RLIMIT_DATA is still valid and a user won't be able to gain more memory in
case of expanding VMAs via new values shipped with prctl call.

Link: https://lkml.kernel.org/r/20210121221207.GB2174@grain
Fixes: bbdc6076d2e5 ("binfmt_elf: move brk out of mmap when doing direct loader exec")
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Reported-by: Keno Fischer <keno@juliacomputing.com>
Acked-by: Andrey Vagin <avagin@gmail.com>
Tested-by: Andrey Vagin <avagin@gmail.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Cc: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

9p/trans_virtio: Remove sysfs file on probe failure

commit f997ea3b7afc108eb9761f321b57de2d089c7c48 upstream.

This ensures we don't leak the sysfs file if we failed to
allocate chan->vc_wq during probe.

Link: http://lkml.kernel.org/r/20210517083557.172-1-xieyongji@bytedance.com
Fixes: 86c8437383ac ("net/9p: Add sysfs mount_tag file for virtio 9P device")
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thermal/drivers/exynos: Fix an error code in exynos_tmu_probe()

commit 02d438f62c05f0d055ceeedf12a2f8796b258c08 upstream.

This error path return success but it should propagate the negative
error code from devm_clk_get().

Fixes: 6c247393cfdd ("thermal: exynos: Add TMU support for Exynos7 SoC")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210810084413.GA23810@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf tools: Allow build-id with trailing zeros

commit 4a86d41404005a3c7e7b6065e8169ac6202887a9 upstream.

Currently perf saves a build-id with size but old versions assumes the
size of 20.  In case the build-id is less than 20 (like for MD5), it'd
fill the rest with 0s.

I saw a problem when old version of perf record saved a binary in the
build-id cache and new version of perf reads the data.  The symbols
should be read from the build-id cache (as the path no longer has the
same binary) but it failed due to mismatch in the build-id.

  symsrc__init: build id mismatch for /home/namhyung/.debug/.build-id/53/e4c2f42a4c61a2d632d92a72afa08f00000000/elf.

The build-id event in the data has 20 byte build-ids, but it saw a
different size (16) when it reads the build-id of the elf file in the
build-id cache.

  $ readelf -n ~/.debug/.build-id/53/e4c2f42a4c61a2d632d92a72afa08f00000000/elf

  Displaying notes found in: .note.gnu.build-id
    Owner                Data size  Description
    GNU                  0x00000010 NT_GNU_BUILD_ID (unique build ID bitstring)
      Build ID: 53e4c2f42a4c61a2d632d92a72afa08f

Let's fix this by allowing trailing zeros if the size is different.

Fixes: 39be8d0115b321ed ("perf tools: Pass build_id object to dso__build_id_equal()")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210910224630.1084877-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools lib: Adopt memchr_inv() from kernel

commit b3e453272d436aab8adbe810c6d7043670281487 upstream.

We'll use it to check for undefined/zero data.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201126170026.2619053-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf test: Fix bpf test sample mismatch reporting

commit 3e11300cdfd5f1bc13a05dfc6dccf69aca5dd1dc upstream.

When the expected sample count in the condition changed, the message
needs to be changed too, otherwise we'll get:

  0x1001f2091d8: mmap mask[0]:
  BPF filter result incorrect, expected 56, got 56 samples

Fixes: 4b04e0decd2518e5 ("perf test: Fix basic bpf filtering test")
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Link: https //lore.kernel.org/r/20210805160611.5542-1-mpetlan@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: acpi: Avoid comparison GSI with Linux vIRQ

commit 67db87dc8284070adb15b3c02c1c31d5cf51c5d6 upstream.

Currently the CRST parsing relies on the fact that on most of x86 devices
the IRQ mapping is 1:1 with Linux vIRQ. However, it may be not true for
some. Fix this by converting GSI to Linux vIRQ before checking it.

Fixes: ee8209fd026b ("dma: acpi-dma: parse CSRT to extract additional resources")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210730202715.24375-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

um: virtio_uml: fix memory leak on init failures

commit 7ad28e0df7ee9dbcb793bb88dd81d4d22bb9a10e upstream.

If initialization fails, e.g. because the connection failed,
we leak the 'vu_dev'. Fix that. Reported by smatch.

Fixes: 5d38f324993f ("um: drivers: Add virtio vhost-user driver")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

coredump: fix memleak in dump_vma_snapshot()

commit 6fcac87e1f9e5b27805a2a404f4849194bb51de8 upstream.

dump_vma_snapshot() allocs memory for *vma_meta, when dump_vma_snapshot()
returns -EFAULT, the memory will be leaked, so we free it correctly.

Link: https://lkml.kernel.org/r/20210810020441.62806-1-qiuxi1@huawei.com
Fixes: a07279c9a8cd7 ("binfmt_elf, binfmt_elf_fdpic: use a VMA list snapshot")
Signed-off-by: QiuXi <qiuxi1@huawei.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jann Horn <jannh@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: Fix bitwise vs logical operator in TranslateRxSignalStuff819xUsb()

commit 099ec97ac92911abfb102bb5c68ed270fc12e0dd upstream.

clang warns:

drivers/staging/rtl8192u/r8192U_core.c:4268:20: warning: bitwise and of
boolean expressions; did you mean logical and? [-Wbool-operation-and]
        bpacket_toself =  bpacket_match_bssid &
                          ^~~~~~~~~~~~~~~~~~~~~
                                              &&
1 warning generated.

Replace the bitwise AND with a logical one to clear up the warning, as
that is clearly what was intended.

Fixes: 8fc8598e61f6 ("Staging: Added Realtek rtl8192u driver to staging")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20210814235625.1780033-1-nathan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>