Marek Vasut [Mon, 4 Apr 2016 15:28:16 +0000 (17:28 +0200)]
ddr: altera: Fix scc_mgr_set() argument order
The code should be setting registers to zero, not one register to value.
Swap the order of arguments to correct the behavior. The behavior is now
in-line with code generated by Quartus 15.1 .
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Chin Liang See <clsee@altera.com>
Marek Vasut [Tue, 5 Apr 2016 21:41:56 +0000 (23:41 +0200)]
ddr: altera: Tweak DQS tracking enable handling
In the most unlikely case the DQS tracking was to be disabled,
make sure we do not errornously re-enable it. Note that DQS
tracking is enabled on all systems observed thus far.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Chin Liang See <clsee@altera.com>
Marek Vasut [Mon, 4 Apr 2016 14:07:11 +0000 (16:07 +0200)]
ddr: altera: Replace ad-hoc constant with macro
The bit 22 is in fact DQS tracking enable bit (dqstrken) and there
is a macro for this bit already, so use it.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Chin Liang See <clsee@altera.com>
Stephen Warren [Sat, 16 Apr 2016 02:42:59 +0000 (20:42 -0600)]
ARM: rpi: fix 64-bit CONFIG_SYS_TEXT_BASE
The Pi firmware has changed the default "kernel" load address for 64-bit
mode. The authors have confirmed that this is a deliberate and long-term
change. Adapt U-Boot to the new value.
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Tom Rini [Tue, 12 Apr 2016 19:11:22 +0000 (15:11 -0400)]
drivers/tpm/tpm_tis_sandbox.c: Fix uninitialized variable use
In rollback_space_kernel we were not initializing the reserved fields
which should be for safety sake, and doing memset here means we don't
need to set the version field specifically either.
Reported-by: Coverity (CID: 143917)
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Stephen Warren [Wed, 6 Apr 2016 18:49:19 +0000 (12:49 -0600)]
fdt: implement dev_get_addr_name()
This function parses the reg property based on an index found in the
reg-names property. This is required for bindings that are written
using reg-names rather than hard-coding indices in reg.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tom Rini [Tue, 15 Mar 2016 17:20:23 +0000 (13:20 -0400)]
sandbox: Enable many more commands
- Set CONFIG_SYS_CACHELINE_SIZE to ARCH_DMA_MINALIGN as that should be
good enough.
- Make <asm/io.h> include <asm/types.h> like other arches do
- Enable many many more drivers in sandbox_defconfig so that we can get
more build-time testing on this platform.
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Sun, 20 Mar 2016 14:10:28 +0000 (10:10 -0400)]
test/dm/core.c: Make pre-reloc test use pre-reloc struct
LLVM 3.5 noted:
test/dm/core.c:41:35: warning: unused variable 'test_pdata_pre_reloc' [-Wunused-const-variable]
static const struct dm_test_pdata test_pdata_pre_reloc = {
And the correct fix here is that the driver_info_pre_reloc test should
use the test_pdata_pre_reloc not test_pdata_manual variable
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Jagan Teki [Thu, 17 Mar 2016 06:53:19 +0000 (12:23 +0530)]
board: README.sandbox: Update dm test command
Update dm test command with pytest instead of ./test/dm/test-dm.sh
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
Jagan Teki [Thu, 17 Mar 2016 06:53:18 +0000 (12:23 +0530)]
doc: driver-model: Update dm tests run using test.py
Since all the tests are implemented in pytest infrastructure,
So update the dm tests with the same instead of ./test/dm/test-dm.sh
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
Stefan Roese [Wed, 16 Mar 2016 08:58:01 +0000 (09:58 +0100)]
dm: device.c: Minor coding-style fix
Fix multi-line comment indentation in device_bind()
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Nishanth Menon [Tue, 15 Mar 2016 21:15:32 +0000 (16:15 -0500)]
dm: part: fix missing driver name in debug print
Fixes the following warning with PART_DEBUG enabled:
disk/part.c: In function ‘get_partition_info’:
disk/part.c:372:3: warning: format ‘%s’ expects a matching ‘char *’ argument [-Wformat]
Signed-off-by: Nishanth Menon <nm@ti.com>
Peng Fan [Sat, 12 Mar 2016 05:17:38 +0000 (13:17 +0800)]
dm: core: device: set pinctrl state for pinctrl device
We may have pinmux settings for pinctrl device, like the following
example:
"
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog_1>;
imx6ul-evk {
pinctrl_hog_1: hoggrp-1 {
fsl,pins = <
MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059 /* SD1 CD */
MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT 0x17059 /* SD1 VSELECT */
MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x17059 /* SD1 RESET */
MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x80000000
>;
};
[......]
};
"
We should not only select pinctrl state for non pinctrl devices, we
need also to handle pin mux settings such as pinctrl_log for pinctrl
devices.
So at the end of probing process of pinctrl device, select the default
state of pinctrl device.
Signed-off-by: Peng Fan <van.freenix@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tom Rini [Wed, 13 Apr 2016 19:45:50 +0000 (15:45 -0400)]
xpress: Update <usb/ehci-fsl.h> include
This has been renamed to <usb/ehci-ci.h> some time ago but was missed
here.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Wed, 13 Apr 2016 16:53:11 +0000 (12:53 -0400)]
Merge branch 'master' of git://denx.de/git/u-boot-microblaze
Michal Simek [Wed, 13 Apr 2016 06:49:03 +0000 (08:49 +0200)]
ARM64: zynqmp: Use i2c cadence DM driver
Use i2c cadence DM driver for all zynqmp targets except ZCU102
because I2C muxes and PCA953x are not supported in the tree yet.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Moritz Fischer [Mon, 28 Dec 2015 17:47:11 +0000 (09:47 -0800)]
dm: i2c: Add driver for Cadence I2C IP
This is a possible drop in replacement for drivers/i2c/zynq-i2c.c
Since this is cadence IP it has been renamed to cdns-i2c,
to make sense with the compatible string.
Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Moritz Fischer [Mon, 28 Dec 2015 17:47:10 +0000 (09:47 -0800)]
i2c: Describe Cadence I2C devicetree bindings
Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Mon, 11 Apr 2016 11:48:32 +0000 (13:48 +0200)]
ARM64: zynqmp: Enable pca953x driver for zcu102
zcu102 has two pca953x on i2c bus 0. Chips 0x20 and 0x21.
Enable option to work with these two chips.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Mon, 11 Apr 2016 11:51:26 +0000 (13:51 +0200)]
GPIO: pca953x: Remove compilation warnings on arm64
Warnings:
w+../drivers/gpio/pca953x.c: In function ‘do_pca953x’:
w+../drivers/gpio/pca953x.c:220:5: warning: cast from pointer to integer
of different size [-Wpointer-to-int-cast]
w+../drivers/gpio/pca953x.c:233:10: warning: cast from pointer to
integer of different size [-Wpointer-to-int-cast]
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Mon, 11 Apr 2016 09:33:26 +0000 (11:33 +0200)]
ARM64: zynqmp: Enable CMD_GPIO and DM_GPIO for ep108
Enable missing GPIO options.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Siva Durga Prasad Paladugu [Thu, 10 Mar 2016 10:57:44 +0000 (16:27 +0530)]
zynqmp: Kconfig: Enable ZYNQ_GPIO for ZynqMP
Enable ZYNQ_GPIO for ZynqMP using Kconfig. It enables the GPIO
driver support for ZynqMP.
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Siva Durga Prasad Paladugu [Thu, 10 Mar 2016 10:57:43 +0000 (16:27 +0530)]
gpio: zynqmp: Add GPIO driver support for ZynqMP
Add GPIO driver support for ZynqMP platform
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Siva Durga Prasad Paladugu [Thu, 10 Mar 2016 10:57:42 +0000 (16:27 +0530)]
gpio: zynq: Move the definitions to driver file
Move all the gpio definitions to driver file as
there is no use of them in other files.
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Siva Durga Prasad Paladugu [Thu, 10 Mar 2016 10:57:40 +0000 (16:27 +0530)]
gpio: zynq: Remove non driver model code
Remove non driver model support as it moved
to driver model. Dont need non driver model
anymore.
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Siva Durga Prasad Paladugu [Thu, 10 Mar 2016 10:57:39 +0000 (16:27 +0530)]
gpio: Kconfig: Enable Zynq GPIO driver using kconfig
Enable DM GPIO and ZYNQ GPIO using kconfig instead of the board
config file.
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Siva Durga Prasad Paladugu [Thu, 10 Mar 2016 10:57:38 +0000 (16:27 +0530)]
gpio: zynq: Convert Zynq GPIO to driver model
Convert Zynq GPIO driver to driver model
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Thu, 7 Apr 2016 14:25:35 +0000 (16:25 +0200)]
ARM64: zynqmp: Clean header after moving stuff to Kconfig
Moving stuff to Kconfig by script is keep some empty lines
or comment in the file. Remove them.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Thu, 7 Apr 2016 14:00:11 +0000 (16:00 +0200)]
ARM64: zynqmp: Add support for zc1751 with DC cards
Support ZynqMP zc1751 with DC cards.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Mon, 11 Apr 2016 06:07:07 +0000 (08:07 +0200)]
ARM64: zynqmp: Add defconfig for zcu102 revB board
Support natively revB board. Till now support for revB was done via
zcu102 defconfig where device-tree was changed to revB.
This patch is adding direct defconfig for RevB.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Thu, 7 Apr 2016 13:58:23 +0000 (15:58 +0200)]
ARM64: zynqmp: Add support for ZCU102 platform
Add new board support.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Mon, 11 Apr 2016 09:44:40 +0000 (11:44 +0200)]
ARM64: zynqmp: Remove netdev.h from board file
Including netdev.h is causing compilation warning:
+ int fecmxc_register_mii_postcall(struct eth_device *dev, int
(*cb)(int));
+ ^
w+In file included from ../board/xilinx/zynqmp/zynqmp.c:9:0:
w+../include/netdev.h:204:41: warning: ‘struct eth_device’ declared
inside parameter list [enabled by default]
w+../include/netdev.h:204:41: warning: its scope is only this definition
or declaration, which is probably not what you want [enabled by default]
This patch removes it.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Fri, 1 Apr 2016 13:55:47 +0000 (15:55 +0200)]
ARM64: zynqmp: Make DDR detection code work on 32bit system
Define u64 types to be usable on 32bit system because of 64bit address
and size cells and 32bit shifts in the code.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Mon, 22 Feb 2016 09:01:27 +0000 (10:01 +0100)]
ARM64: zynqmp: Extend early malloc space to be able to run DM drivers
DM drivers need more malloc space for early DM models allocation.
Use 4k instead of 1k.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Mon, 4 Apr 2016 13:32:20 +0000 (15:32 +0200)]
ARM64: zynqmp: Do not setup DM_ETH/GPIO/MMC by default for all boards
There are mini configurations which need to be fit to OCM that's why
these options shouldn't be enabled by default.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Punnaiah Choudary Kalluri [Thu, 5 Nov 2015 16:51:14 +0000 (22:21 +0530)]
ARM64: zynqmp: Add missing nand node for ep108
Add missing nand node for ep108.
Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Anurag Kumar Vulisha [Thu, 5 Nov 2015 11:51:37 +0000 (17:21 +0530)]
ARM64: zynqmp: Added OOB timing settings in zynqmp-ep108.dts
This patch adds the sata port phy OOB timing values in the sata
device-tree node.
Signed-off-by: Anurag Kumar Vulisha <anuragku@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Thu, 7 Apr 2016 13:07:38 +0000 (15:07 +0200)]
ARM64: zynqmp: Use 64bit size cell format for memory node
Enable option to support more then 4GB memories in single size block.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Thu, 7 Apr 2016 13:06:07 +0000 (15:06 +0200)]
ARM64: zynqmp: Fix DWC3 binding with the kernel
Use the same binding as is used in mainline Linux kernel.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Wed, 27 Jan 2016 18:02:37 +0000 (19:02 +0100)]
ARM64: zynqmp: Add serdes address space dp driver
For run time serdes adjustment.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Thu, 7 Apr 2016 13:01:33 +0000 (15:01 +0200)]
ARM64: zynqmp: Align register description
Separate register space and put it on more lines.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Hyun Kwon [Tue, 24 Nov 2015 01:12:55 +0000 (17:12 -0800)]
ARM64: zynqmp: dp: Add default properties to zynqmp.dtsi
Add some default properties to zynqmp.dtsi.
Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Hyun Kwon [Tue, 24 Nov 2015 01:12:54 +0000 (17:12 -0800)]
ARM64: zynqmp: Use correct addresses in node names
Reflect actual silicon addresses in DT node names.
Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Wed, 27 Jan 2016 18:04:56 +0000 (19:04 +0100)]
ARM64: zynqmp: Align node address with parent node for dpdma
Use right addresses for channel names
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Fri, 27 Nov 2015 12:22:58 +0000 (13:22 +0100)]
ARM64: zynqmp: Add backward compatible string for uart
Mainline kernel has no r1p12 compatible string that's why console stops
to work with the latest DTS files. Append generic compatible string.
Keep in your mind that using this generic compatible string not all uart
features will be available.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Wed, 20 Jan 2016 11:59:23 +0000 (12:59 +0100)]
ARM64: zynqmp: Fix coding style for pcie
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Bharat Kumar Gogada [Mon, 15 Feb 2016 15:48:58 +0000 (21:18 +0530)]
ARM64: zynqmp: Extend pcie node to support legacy interrupts
Modifying device tree node to support legacy interrupts.
Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Mon, 23 Nov 2015 12:26:15 +0000 (13:26 +0100)]
ARM64: zynqmp: Add interrupt-controller property to gpio nodes
GPIO driver supports an input interrupt that's why gpio node itself can
be labeled as interrupt controller.
Reported-by: John Linn <linnj@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Naga Sureshkumar Relli [Fri, 11 Mar 2016 07:40:26 +0000 (13:10 +0530)]
ARM64: zynqmp: Add ddrc node in dts
This patch adds ddrc memory controller node in dts.
size mentioned in dts is 0x30000, because we need to access DDR_QOS
INTR registers located at
fd090208 from this driver.
Signed-off-by: Naga Sureshkumar Relli <nagasure@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
VNSL Durga [Thu, 24 Mar 2016 17:15:12 +0000 (22:45 +0530)]
ARM64: zynqmp: Added clocks to DT
ZynqMP DMA's main clock and apb clock are added
in zynqmp DT.
Signed-off-by: VNSL Durga <vnsldurg@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com>
Michal Simek [Thu, 26 Nov 2015 10:21:25 +0000 (11:21 +0100)]
ARM64: zynqmp: Add CCI-400 node
Add CCI-400 node to DTSI.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Thu, 7 Apr 2016 13:28:33 +0000 (15:28 +0200)]
ARM64: zynqmp: Add missing interrupt-parent to PMU node
ZynqMP is not using global interrupt-parent setting that's why
it has to be listed in every node separately. PMU node missed it and
this patch is adding it.
Reported-by: John Linn <John.Linn@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Soren Brinkmann [Mon, 11 Jan 2016 23:34:42 +0000 (15:34 -0800)]
ARM64: zynqmp: DT: Add power domains
Add power-domains to the DT and attach devices to them.
The power-domains are all logical domains as understood by firmware.
Each PD is identified by a unique identifier that the platform firmware
understands.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
P L Sai Krishna [Tue, 19 Jan 2016 13:31:10 +0000 (19:01 +0530)]
ARM64: zynqmp: Added broken-tuning property to SD, eMMC nodes
This patch adds broken-tuning property to SD and
eMMC nodes.
Signed-off-by: P L Sai Krishna <lakshmis@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Thu, 11 Feb 2016 14:26:46 +0000 (15:26 +0100)]
ARM64: zynqmp: Sync GEM nodes with Linux
Remove jumbo properties which are handled in the driver directly
and use mainline compatible string which is already handled by the
driver.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Edgar E. Iglesias [Thu, 26 Nov 2015 13:12:20 +0000 (14:12 +0100)]
ARM64: zynqmp: Hook up the GEMs to the SMMU
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Edgar E. Iglesias [Thu, 26 Nov 2015 13:12:19 +0000 (14:12 +0100)]
ARM64: zynqmp: Correct IRQ nr for the SMMU
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
P L Sai Krishna [Thu, 7 Jan 2016 09:27:27 +0000 (14:57 +0530)]
ARM64: zynqmp: Add 8-bit bus width property.
This patch add 8-bit bus width property to eMMC node.
Signed-off-by: P L Sai Krishna <lakshmis@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Ranjit Waghmode [Wed, 2 Dec 2015 04:36:58 +0000 (10:06 +0530)]
ARM64: zynqmp: dt: Change qspi node compatible string
This patch makes compatible string as "m25p80" for qspi node in
ep108 device tree file
Signed-off-by: Ranjit Waghmode <ranjit.waghmode@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Tue, 23 Feb 2016 08:30:15 +0000 (09:30 +0100)]
ARM64: zynqmp: Add missing mmc aliases
Add missing mmc aliases.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Alistair Francis [Thu, 25 Feb 2016 17:30:03 +0000 (09:30 -0800)]
ARM64: zynqmp: Use C pre-processor for includes in dts
Change the dtsi include code to use the C pre-processor #include instead
of the device tree /include/. This brings all ZynqMP device trees inline
with each other.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Siva Durga Prasad Paladugu [Mon, 2 Nov 2015 14:15:35 +0000 (19:45 +0530)]
ARM64: zynqmp: Move kernel and fdt offsets and sizes to board config file
Move kernel and fdt offsets and sizes to board config file
as the flash size varies across boards
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Thu, 7 Apr 2016 16:55:11 +0000 (18:55 +0200)]
ARM: zynq: Do not perform reset at the end of thor
Setup reset off for lthor.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Fri, 1 Apr 2016 13:56:33 +0000 (15:56 +0200)]
ARM: zynq: Support systems with more memory banks
This is example how to change u-boot to support more memory banks read
from DT.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Fri, 1 Apr 2016 14:04:14 +0000 (16:04 +0200)]
ARM: zynq: Use memory initialization based on DTS file
Remove hardcoded memory sizes. Use information from DT memory node.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Thu, 7 Apr 2016 12:42:53 +0000 (14:42 +0200)]
ARM: zynq: Fix usb phy node for Zybo
Compatible property should be the first.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Tue, 12 Jan 2016 07:06:36 +0000 (08:06 +0100)]
ARM: zynq: Extend microzed board support
Add missing DT nodes and enable USB.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Nathan Rossi <nathan@nathanrossi.com>
Michal Simek [Thu, 7 Apr 2016 11:08:35 +0000 (13:08 +0200)]
ARM: zynq: Add missing qspi for xm013
Add missing qspi node and make qspi as spi0.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Thu, 7 Apr 2016 13:24:08 +0000 (15:24 +0200)]
ARM: zynq: Create empty line below headers
Sync with others zynq DTS files.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Thu, 7 Apr 2016 11:04:15 +0000 (13:04 +0200)]
ARM: zynq: Align spi and qspi node locations
Keep nodes alphabelitally sorted.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Nathan Rossi <nathan@nathanrossi.com>
Christian Kohn [Thu, 12 Nov 2015 23:53:36 +0000 (15:53 -0800)]
ARM: zynq: zc706: Add adv7511 on i2c bus
Add missing adv7511 and configure to match Base TRD.
Signed-off-by: Christian Kohn <christian.kohn@xilinx.com>
Reviewed-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Christian Kohn [Thu, 12 Nov 2015 23:53:35 +0000 (15:53 -0800)]
ARM: zynq: zc702: Add adv7511 on i2c bus
Add bindings for adv7511.
Signed-off-by: Christian Kohn <christian.kohn@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Punnaiah Choudary Kalluri [Wed, 3 Feb 2016 09:57:18 +0000 (15:27 +0530)]
ARM: zynq: DT: Add ethernet phy reset information
Added phy reset gpio information for gem0.
Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Thu, 7 Apr 2016 09:15:00 +0000 (11:15 +0200)]
ARM: zynq: Fix bootargs in board dtsi
- Sync with Linux kernel
- Remove rootfs
- Remove earlyprintk
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Thu, 7 Apr 2016 09:00:37 +0000 (11:00 +0200)]
ARM: zynq: Align devcfg node
- Have compatible string as the first property
- Sync with Linux kernel dtsi
- Add missing interrupt properties
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Moritz Fischer [Tue, 23 Jun 2015 06:18:44 +0000 (23:18 -0700)]
ARM: dts: Updated devicetree bindings for Zynq 7000 platform
Added addtional bindings required for FPGA Manager operation
of the Xilinx Zynq Devc configuration interface.
Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Moritz Fischer [Fri, 31 Jul 2015 01:13:55 +0000 (18:13 -0700)]
ARM: dts: zynq: Add devicetree entry for Xilinx Zynq reset controller.
Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Thu, 7 Apr 2016 08:54:08 +0000 (10:54 +0200)]
ARM: zynq: Add interrupt-controller property to gpio nodes
GPIO driver supports an input interrupt that's why gpio node itself can
be labeled as interrupt controller.
Reported-by: John Linn <linnj@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Tom Rini [Wed, 13 Apr 2016 12:27:49 +0000 (08:27 -0400)]
Merge git://www.denx.de/git/u-boot-cfi-flash
Rouven Behr [Sun, 10 Apr 2016 11:38:13 +0000 (13:38 +0200)]
mtd: cfi: Unlock current sector instead of sector 0 before buffered write
Unlock current sector instead of sector 0 before buffered write.
[Patch subject and commit text slightly reworded, Stefan]
Signed-off-by: Rouven Behr <u-boot@behr-iss.de>
Signed-off-by: Stefan Roese <sr@denx.de>
Tom Rini [Wed, 13 Apr 2016 11:19:50 +0000 (07:19 -0400)]
Merge branch 'master' of git://denx.de/git/u-boot-imx
Tom Rini [Tue, 12 Apr 2016 13:10:54 +0000 (09:10 -0400)]
Merge git://www.denx.de/git/u-boot-marvell
Stefan Roese [Fri, 8 Apr 2016 14:09:39 +0000 (16:09 +0200)]
arm: mvebu: theadorable: Remove Board name output in checkboard
This line is not needed, as the board supports DT based probing. And
here the "Model:" is already printed:
Model: Marvell Armada XP theadorable
Board: theadorable
One line for the board name is enough.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 8 Apr 2016 13:58:30 +0000 (15:58 +0200)]
arm: mvebu: theadorable: Add PEX-switch detection and reset code
Sometimes the PCIe link for the PEX-switch will not come-up. In this case,
the board is not in a usable state. This patch makes sure that in this
case a soft-reset is issued. If this soft-reset does not result in the
PEX-switch being detected after some soft-reset cycles, an I2C message
is sent to the uC to issue a complete power-cycle of the board.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 8 Apr 2016 13:58:29 +0000 (15:58 +0200)]
arm: mvebu: theadorable: Enable 2nd I2C controller
This patch enables the 2nd I2C controller on the Armada XP theadorable
board.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 8 Apr 2016 13:58:28 +0000 (15:58 +0200)]
arm: mvebu: Add base address for 2nd I2C controller
Add MVEBU_TWSI1_BASE define so that the 2nd I2C controller on e.g. AXP
can be used.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Thu, 7 Apr 2016 08:48:14 +0000 (10:48 +0200)]
arm: mvebu: theadorable: Add bootcounter support
This patch adds bootcount support to the MVEBU theadorable board. Since
no reset-safe registers seem to be available, it uses the last 4KiB
of SDRAM for the bootcounter location.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Thu, 7 Apr 2016 08:48:13 +0000 (10:48 +0200)]
arm: mvebu: theadorable: Add USB power toggle and tweak USB PHY register
This patch adds an USB power toggle for theadorable. Additionally, the
USB PHY RX Channel Control 0 Register is changed to fix some issues
noticed while accessing some specific USB sticks.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Thu, 7 Apr 2016 05:41:00 +0000 (07:41 +0200)]
gpio: mvebu_gpio: Add missing out value set to gpio_direction_output()
This patch adds the missing configuration of the output value to the
gpio_direction_output() function. Without this, calling
gpio_direction_output() does not set the out-value at all and only
configures the gpio as output.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Kevin Smith <kevin.smith@elecsyscorp.com>
Reviewed-by: Kevin Smith <kevin.smith@elecsyscorp.com>
Hans de Goede [Sat, 9 Apr 2016 13:02:24 +0000 (15:02 +0200)]
sunxi: Add defconfig and dts file for Orange Pi One SBC
The Orange Pi One SBC, is a stripped down version of the popular
Orange Pi PC. The one is a H3 based SBC, with 512M of RAM,
micro-sd slot, 1 host usb, 1 otg usb, hdmi and 100Mbit ethernet.
The dts is identical to the dts submitted to the upstream kernel.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
Hans de Goede [Sat, 9 Apr 2016 13:00:52 +0000 (15:00 +0200)]
sunxi: H3: Do not clear usb companion clk-gate / reset on remove
On the H3 we need to enable the clk and de-assert the reset of the
companion to be able to talk to the actual usb host controller.
Before this commit we were also disabling the companion clk-gate /
asserting its reset on remove, causing the later remove callback of
the companion itself to (sometimes) fail with:
ERROR: USB HC reset timed out!
This commit fixes this by not disabling the companion's clk-gate nor
asserting its reset on remove.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
Hans de Goede [Sun, 3 Apr 2016 07:41:44 +0000 (09:41 +0200)]
sunxi: Enable CMD_GPIO on all sunxi boards
We have CONFIG_CMD_GPIO=y in almost all sunxi boards, but after
its Kconfig conversion it has ended up missing on some recently
added boards.
Simply select it for ARCH_SUNXI, so that we get it on all
sunxi boards for both a consistent user experience and simpler
defconfig files.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
Hans de Goede [Fri, 1 Apr 2016 10:55:08 +0000 (12:55 +0200)]
sunxi: Enable usb ports on the Sinovoip BPI M3
DLDO3 is used to provide Port-D power and PD is used for the
usb-hub / sata-5v enable pins. The 2.5V comes from the schematic
and matches the factory image fex file.
The dts changes are the minimal changes needed for u-boot to
pick-up the usb host controllers. The upstream kernel does not
(yet) have usb host support.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
Hans de Goede [Fri, 1 Apr 2016 10:53:20 +0000 (12:53 +0200)]
sunxi: Set DCDC1 to 3.3V on the Sinovoip BPI M3
This is the value used in the fex file of the manufacturer images,
and also the DCDC1 default. Sometimes lower values are used to save
battery power, but that does not apply to a SBC.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
Hans de Goede [Fri, 1 Apr 2016 20:39:26 +0000 (22:39 +0200)]
sunxi: Add INITIAL_USB_SCAN_DELAY Kconfig option
Some boards have on board usb devices which need longer than the USB
spec's 1 second to connect from board powerup. Add a config option which
when non 0 adds an extra delay before the first usb bus scan.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
Tom Rini [Tue, 12 Apr 2016 02:22:25 +0000 (22:22 -0400)]
Prepare v2016.05-rc1
Signed-off-by: Tom Rini <trini@konsulko.com>
Steve Rae [Tue, 9 Feb 2016 19:19:11 +0000 (11:19 -0800)]
fastboot: sparse: remove unnecessary logging
remove logging of the 'skipped' blocks
Signed-off-by: Steve Rae <srae@broadcom.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Steve Rae [Tue, 9 Feb 2016 19:19:10 +0000 (11:19 -0800)]
fastboot: sparse: fix block addressing for don't care chunk type
When 7bfc3b1 (sparse: Refactor chunk parsing function) was implemented,
it dropped 9981945 (aboot: fix block addressing for don't care chunk type).
This re-implements the required fix for the "don't care chunk type"...
Signed-off-by: Steve Rae <srae@broadcom.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Tom Rini [Mon, 11 Apr 2016 18:05:37 +0000 (14:05 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-arc
Lokesh Vutla [Mon, 11 Apr 2016 09:54:50 +0000 (15:24 +0530)]
spl: mmc: raw: Try to load u-boot if Linux image is not found
If CONFIG_SPL_OS_BOOT is enabled and Linux image is not flashed at
RAW_MODE_KERNEL_SECTOR in MMC, spl still assumes that Linux is
available and tries to boot it and hangs. In order to avoid this,
adding a check to verify if parsed image header is of type IH_OS_LINUX.
If it fails then fall back to load u-boot image.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>