Linus Walleij [Fri, 4 Nov 2016 10:05:19 +0000 (11:05 +0100)]
mmc: core: use enum mmc_blk_status properly
There were several instances of code using the
enum mmc_blk_status by arbitrarily converting it to an int and
throwing it around to different functions. This makes the code
hard to understand to may give rise to strange errors.
Especially the function prototype mmc_start_req() had to be
modified to take a pointer to an enum mmc_blk_status and the
function pointer .err_check() inside struct mmc_async_req
needed to return an enum mmc_blk_status.
In every case: instead of assigning the block layer error code
to an int, use the enum, also change the signature of all
functions actually passing this enum to use the enum.
To make it possible to use the enum everywhere applicable, move
it to <linux/mmc/core.h> so that all code actually using it can
also see it.
An interesting case was encountered in the MMC test code which
did not return a enum mmc_blk_status at all in the .err_check
function supposed to check whether asynchronous requests worked
or not: instead it returned a normal -ERROR or even the test
frameworks internal error codes.
The test code would also pass on enum mmc_blk_status codes as
error codes inside the test code instead of converting them
to the local RESULT_* codes.
I have tried to fix all instances properly and run some tests
on the result.
Cc: Chunyan Zhang <zhang.chunyan@linaro.org>
Cc: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Linus Walleij [Fri, 4 Nov 2016 10:05:18 +0000 (11:05 +0100)]
mmc: block: convert ecc_err to a bool
The ecc_err flag is only assigned 0 or 1 and treated as a bool,
so convert it to a bool.
Cc: Chunyan Zhang <zhang.chunyan@linaro.org>
Cc: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Linus Walleij [Fri, 4 Nov 2016 10:05:17 +0000 (11:05 +0100)]
mmc: block: make gen_err a bool variable
This gen_err flag is only assigned 0 or 1 and treated as a bool,
so convert it to a bool.
Cc: Chunyan Zhang <zhang.chunyan@linaro.org>
Cc: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Zach Brown [Wed, 2 Nov 2016 15:26:16 +0000 (10:26 -0500)]
mmc: sdhci: Use sdhci-caps-mask and sdhci-caps to change the caps read during __sdhci_read_caps
The sdhci capabilities register can be incorrect. The sdhci-caps-mask
and sdhci-caps dt properties specify which bits of the register are
incorrect and what their values should be. This patch makes the sdhci
driver use those properties to correct the caps during
__sdhci_read_caps.
During __sdhci_read_caps
Use the sdhci-caps-mask property to turn off the incorrect bits of the
sdhci register after reading them.
Use the sdhci-caps to turn on bits after using sdhci-caps-mask to turn
off the incorrect ones.
Signed-off-by: Zach Brown <zach.brown@ni.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Zach Brown [Wed, 2 Nov 2016 15:26:15 +0000 (10:26 -0500)]
mmc: sdhci: dt: Add device tree properties sdhci-caps and sdhci-caps-mask
On some systems the sdhci capabilty register is incorrect for one
reason or another.
The sdhci-caps-mask property specifies which bits in the register
are incorrect and should be turned off before using sdhci-caps to turn
on bits.
The sdhci-caps property specifies which bits should be turned on.
Signed-off-by: Zach Brown <zach.brown@ni.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Linus Walleij [Tue, 25 Oct 2016 09:06:06 +0000 (11:06 +0200)]
mmc: mmci: refactor ST Micro busy detection
The ST Micro-specific busy detection was made after the assumption
that only this variant supports busy detection. So when doing busy
detection, the host immediately tries to use some ST-specific
register bits.
Since the qualcomm variant also supports some busy detection
schemes, encapsulate the variant flags better in the variant struct
and prepare to add more variants by just providing some bitmasks
to the logic.
Put the entire busy detection logic within an if()-clause in the
mmci_cmd_irq() function so the code is only executed when busy
detection is enabled, and so that it is kept in (almost) one
place, and add comments describing what is going on so the
code can be understood.
Tested on the Ux500 by introducing some prints in the busy
detection path and noticing how the IRQ is enabled, used and
disabled successfully.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Linus Walleij [Tue, 25 Oct 2016 09:06:05 +0000 (11:06 +0200)]
mmc: mmci: clean up header defines
There was some confusion in the CPSM (Command Path State Machine)
and DPSM (Data Path State Machine) regarding the naming of the
registers, clarify the meaning of this acronym so the naming is
understandable, and consistently use BIT() to define these fields.
Consequently name the register bit defines MCI_[C|D]PSM_* and
adjust the driver as well.
Include new definitions for a few bits found in a patch from
Srinivas Kandagatla.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Sylwester Nawrocki [Wed, 26 Oct 2016 16:30:53 +0000 (18:30 +0200)]
mmc: s3cmci: Use DMA slave map rather than exported DMA filter
Support for DMA slave map has been added to the s3c24xx-dma
controller in commit
34681d84a0f7cc22ded1413dc79eef8a2f23d9c3
"dmaengine: s3c24xx: Add dma_slave_map for s3c2440 devices"
This patch converts the s3cmci driver to also use it, so we can
eventually get rid of the exported filter function once all
related DMA clients are updated.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Ulf Hansson [Thu, 13 Oct 2016 11:37:40 +0000 (13:37 +0200)]
mmc: core: Don't power off the card when starting the host
The MMC_CAP2_NO_PRESCAN_POWERUP was invented to avoid running the power up
sequence, mmc_power_up(), during ->probe() of the mmc host driver, but
instead defer this to the mmc detect work. This is especially useful for
those hosts that suffers from a long initialization time, as this time
would otherwise add up to the total boot time.
However, due to the introduction of runtime PM of mmc host devices in the
mmc core, this behaviour changed a bit. More precisely, it caused the mmc
core to runtime resume the host device during ->probe() of the host driver.
In cases like the rtsx_usb_sdmmc, runtime resuming the device may be costly
and thus affecting the total boot time.
To improve this behaviour when using MMC_CAP2_NO_PRESCAN_POWERUP, let's
postpone also calling mmc_power_off() when starting the host. This change
allows the mmc core to avoid runtime resuming the device, as it don't need
to claim the host for that execution path.
Cc: Ritesh Raj Sarraf <rrs@researchut.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Kevin Hilman [Wed, 19 Oct 2016 18:18:25 +0000 (11:18 -0700)]
Documentation: DT: MMC: meson-gx: new bindings doc
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Kevin Hilman [Wed, 19 Oct 2016 18:18:24 +0000 (11:18 -0700)]
MMC: meson: initial support for GX platforms
Initial support for the SD/eMMC controller in the Amlogic S905/GX*
family of SoCs.
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Shawn Lin [Wed, 12 Oct 2016 02:56:55 +0000 (10:56 +0800)]
mmc: dw_mmc: remove system PM callback
Now there are no variant drivers using dw_mci_suspend
and dw_mci_resume, so let's remove it.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Shawn Lin [Wed, 12 Oct 2016 02:56:46 +0000 (10:56 +0800)]
mmc: dw_mmc-pltfm: deploy runtime PM facilities
Let's migrate it to use runtime PM and remove the system
PM callback from this driver. With this patch, it could
handle system PM properly and could also use runtime PM
if we enable it.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Shawn Lin [Wed, 12 Oct 2016 02:56:34 +0000 (10:56 +0800)]
mmc: dw_mmc-pci: deploy runtime PM facilities
Let's migrate it to use runtime PM and remove the system
PM callback from this driver. With this patch, it could
handle system PM properly and could also use runtime PM
if we enable it.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Shawn Lin [Wed, 12 Oct 2016 02:55:55 +0000 (10:55 +0800)]
mmc: dw_mmc-exynos: deploy runtime PM facilities
Let's migrate it to use runtime PM and remove the system
PM callback from this driver. With this patch, it could
handle system PM properly and could also use runtime PM
if we enable it.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Shawn Lin [Wed, 12 Oct 2016 02:54:40 +0000 (10:54 +0800)]
mmc: dw_mmc-k3: deploy runtime PM facilities
Let's migrate it to use runtime PM and remove the system
PM callback from this driver. With this patch, it could
handle system PM properly and could also use runtime PM
if we enable it.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Shawn Lin [Wed, 12 Oct 2016 02:50:38 +0000 (10:50 +0800)]
mmc: dw_mmc: disable biu clk if possible
We could disable biu clk if gpio card detect available,
or it is a non-removable device.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Shawn Lin [Wed, 12 Oct 2016 02:50:37 +0000 (10:50 +0800)]
mmc: core: expose the capability of gpio card detect
Add new helper API mmc_can_gpio_cd for slot-gpio to make
host drivers know whether it supports gpio card detect.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Shawn Lin [Wed, 12 Oct 2016 02:50:36 +0000 (10:50 +0800)]
mmc: dw_mmc-rockchip: add runtime PM support
This patch adds runtime PM support for dw_mmc-rockchip.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Shawn Lin [Wed, 12 Oct 2016 02:50:35 +0000 (10:50 +0800)]
mmc: dw_mmc: add runtime PM callback
This patch add dw_mci_runtime_suspend/resume interfaces
and expose it to dw_mci variant driver to support runtime
PM.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Ulf Hansson [Wed, 19 Oct 2016 14:15:31 +0000 (16:15 +0200)]
mmc: core: Don't use ->card_busy() and CMD13 in combination when polling
When polling for busy after sending a MMC_SWITCH command, both the optional
->card_busy() callback and CMD13 are being used in conjunction.
This doesn't make sense. Instead it's more reasonable to rely solely on the
->card_busy() callback when it exists. Let's change that and instead use
the CMD13 as a fall-back. In this way we avoid sending CMD13, unless it's
really needed.
Within this context, let's also take the opportunity to make some
additional clean-ups and clarifications to the related code.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Tested-by: Jaehoon Chung <jh80.chung@samsung.com>
Ulf Hansson [Wed, 19 Oct 2016 11:20:49 +0000 (13:20 +0200)]
mmc: core: Factor out code related to polling in __mmc_switch()
In yet another step of cleaning up __mmc_switch(), let's factor out the
code that deals with card busy polling.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Tested-by: Jaehoon Chung <jh80.chung@samsung.com>
Ulf Hansson [Wed, 19 Oct 2016 09:35:12 +0000 (11:35 +0200)]
mmc: core: Clarify code which deals with polling in __mmc_switch()
The __mmc_switch() deserves a clean-up. In this step, let's move some code
outside of the do-while loop, which deal deals with the card busy polling.
This change simplifies the code in that sense that it becomes easier to follow
what is being executed during card busy polling, but it also gives a better
understanding for when polling isn't done.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Tested-by: Jaehoon Chung <jh80.chung@samsung.com>
Ulf Hansson [Wed, 19 Oct 2016 09:04:42 +0000 (11:04 +0200)]
mmc: core: Make mmc_switch_status() available for mmc core
Following changes needs mmc_switch_status() to be available both from mmc.c
and mmc_ops.c. Allow that by moving its implementation to mmc_ops.c and
make it available via mmc_ops.h.
Moving mmc_switch_status() to mmc_ops.c, also enables us to turn
mmc_switch_status_error() into static function. So let's take the
opportunity to change this as well.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Tested-by: Jaehoon Chung <jh80.chung@samsung.com>
Pramod Gurav [Fri, 21 Oct 2016 06:42:04 +0000 (12:12 +0530)]
mmc: sdhci-msm: Add pm_runtime and system PM support
Provides runtime PM callbacks to enable and disable clock resources
when idle. Also support system PM callbacks to be called during system
suspend and resume.
Reviewed-by: Ritesh Harjani <riteshh@codeaurora.org>
Reviewed-by: Georgi Djakov <georgi.djakov@linaro.org>
Tested-by: Ritesh Harjani <riteshh@codeaurora.org>
Signed-off-by: Pramod Gurav <pramod.gurav@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Maxime Ripard [Wed, 19 Oct 2016 13:33:04 +0000 (15:33 +0200)]
mmc: sunxi: Prevent against null dereference for vmmc
VMMC is an optional regulator, which means that mmc_regulator_get_supply
will only return an error in case of a deferred probe, but not when the
regulator is not set in the DT.
However, the sunxi driver assumes that VMMC is always there, and doesn't
check the value of the regulator pointer before using it, which obviously
leads to a (close to) null pointer dereference.
Add proper checks to prevent that.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Jeonghan Kim [Wed, 19 Oct 2016 10:48:02 +0000 (19:48 +0900)]
mmc: block: Change MMC_IOC_MAX_BYTES
It is used for limitation of buffer size during IOCTL such as FFU.
However, eMMC FW size is bigger than (512L*256).
(For instance, currently, Samsung eMMC FW size is over 300KB.)
So, it needs to increase to execute FFU.
Signed-off-by: Jeonghan Kim <jh4u.kim@samsung.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Javier Martinez Canillas [Mon, 17 Oct 2016 16:13:45 +0000 (13:13 -0300)]
mmc: sdhci-of-at91: Fix module autoload
If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.
Export the module alias information using the MODULE_DEVICE_TABLE() macro.
Before this patch:
$ modinfo drivers/mmc/host/sdhci-of-at91.ko | grep alias
$
After this patch:
$ modinfo drivers/mmc/host/sdhci-of-at91.ko | grep alias
alias: of:N*T*Catmel,sama5d2-sdhciC*
alias: of:N*T*Catmel,sama5d2-sdhci
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Javier Martinez Canillas [Mon, 17 Oct 2016 16:13:44 +0000 (13:13 -0300)]
mmc: mediatek: Fix module autoload
If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.
Export the module alias information using the MODULE_DEVICE_TABLE() macro.
Before this patch:
$ modinfo drivers/mmc/host/mtk-sd.ko | grep alias
$
After this patch:
$ modinfo drivers/mmc/host/mtk-sd.ko | grep alias
alias: of:N*T*Cmediatek,mt8135-mmcC*
alias: of:N*T*Cmediatek,mt8135-mmc
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Ulf Hansson [Thu, 13 Oct 2016 11:37:39 +0000 (13:37 +0200)]
mmc: rtsx_usb_sdmmc: Enable runtime PM autosuspend
Enable runtime PM autosuspend for the rtsx_usb_sdmmc driver to avoid the
device being runtime suspended and runtime resumed between each request.
Let's use a default timeout of 50ms, to be consistent with other mmc hosts.
Cc: Ritesh Raj Sarraf <rrs@researchut.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Jaehoon Chung [Fri, 7 Oct 2016 05:08:43 +0000 (14:08 +0900)]
mmc: sdhci: put together into one condition checking
value of ios->timing is not related with SDCHI v3.0. If Controller version
is v3.0, SDHCI_QUIRK_NO_HISPD_BIT is meaningless. To prevent the setting
wrong bit moves into one condition checking. (e.g sdhci-s3c doesn't use
SDHCI_CTRL_HISPD bit, instead using this bit as other purpose.)
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Linus Torvalds [Sun, 27 Nov 2016 21:08:04 +0000 (13:08 -0800)]
Linux 4.9-rc7
Linus Torvalds [Sun, 27 Nov 2016 16:24:46 +0000 (08:24 -0800)]
Merge git://git.infradead.org/intel-iommu
Pull IOMMU fixes from David Woodhouse:
"Two minor fixes.
The first fixes the assignment of SR-IOV virtual functions to the
correct IOMMU unit, and the second fixes the excessively large (and
physically contiguous) PASID tables used with SVM"
* git://git.infradead.org/intel-iommu:
iommu/vt-d: Fix PASID table allocation
iommu/vt-d: Fix IOMMU lookup for SR-IOV Virtual Functions
Linus Torvalds [Sun, 27 Nov 2016 16:22:59 +0000 (08:22 -0800)]
Merge branch 'upstream' of git://git.linux-mips.org/ralf/upstream-linus
Pull MIPS fixes from Ralf Baechle:
"Another round of MIPS fixes for 4.9:
- Fix unreadable output in __do_page_fault due to the KERN_CONT
patchset
- Correctly handle MIPS R6 fixes to the c0_wired register"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: mm: Fix output of __do_page_fault
MIPS: Mask out limit field when calculating wired entry count
Linus Torvalds [Sun, 27 Nov 2016 01:21:13 +0000 (17:21 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs
Pull vfs splice fix from Al Viro.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix default_file_splice_read()
Al Viro [Sun, 27 Nov 2016 01:05:42 +0000 (20:05 -0500)]
fix default_file_splice_read()
Botched calculation of number of pages. As the result,
we were dropping pieces when doing splice to pipe from
e.g. 9p.
Reported-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Linus Torvalds [Sat, 26 Nov 2016 23:28:34 +0000 (15:28 -0800)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Here is a revert and two bugfixes for the I2C designware driver.
Please note that we are still hunting down a regression for the
i2c-octeon driver. While there is a fix pending, we have unclear
feedback from the testers currently. An rc8 would be quite helpful
for this case"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
Revert "i2c: designware: do not disable adapter after transfer"
i2c: designware: fix rx fifo depth tracking
i2c: designware: report short transfers
Linus Torvalds [Sat, 26 Nov 2016 23:26:20 +0000 (15:26 -0800)]
Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fix from Russell King:
"This resolves the ksyms issues by reverting the commit which
introduced the breakage"
There was what I consider to be a better fix, but it's late in the rc
game, so I'll take the revert.
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
Revert "arm: move exports to definitions"
Linus Torvalds [Sat, 26 Nov 2016 21:05:05 +0000 (13:05 -0800)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Fix leak in fsl/fman driver, from Dan Carpenter.
2) Call flow dissector initcall earlier than any networking driver can
register and start to use it, from Eric Dumazet.
3) Some dup header fixes from Geliang Tang.
4) TIPC link monitoring compat fix from Jon Paul Maloy.
5) Link changes require EEE re-negotiation in bcm_sf2 driver, from
Florian Fainelli.
6) Fix bogus handle ID passed into tfilter_notify_chain(), from Roman
Mashak.
7) Fix dump size calculation in rtnl_calcit(), from Zhang Shengju.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits)
tipc: resolve connection flow control compatibility problem
mvpp2: use correct size for memset
net/mlx5: drop duplicate header delay.h
net: ieee802154: drop duplicate header delay.h
ibmvnic: drop duplicate header seq_file.h
fsl/fman: fix a leak in tgec_free()
net: ethtool: don't require CAP_NET_ADMIN for ETHTOOL_GLINKSETTINGS
tipc: improve sanity check for received domain records
tipc: fix compatibility bug in link monitoring
net: ethernet: mvneta: Remove IFF_UNICAST_FLT which is not implemented
dwc_eth_qos: drop duplicate headers
net sched filters: fix filter handle ID in tfilter_notify_chain()
net: dsa: bcm_sf2: Ensure we re-negotiate EEE during after link change
bnxt: do not busy-poll when link is down
udplite: call proper backlog handlers
ipv6: bump genid when the IFA_F_TENTATIVE flag is clear
net/mlx4_en: Free netdev resources under state lock
net: revert "net: l2tp: Treat NET_XMIT_CN as success in l2tp_eth_dev_xmit"
rtnetlink: fix the wrong minimal dump size getting from rtnl_calcit()
bnxt_en: Fix a VXLAN vs GENEVE issue
...
Linus Torvalds [Sat, 26 Nov 2016 20:24:47 +0000 (12:24 -0800)]
Merge branch 'libnvdimm-fixes' of git://git./linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
- Fix a crash that occurs at driver initialization if the memory region
is already busy (request_mem_region() fails).
- Fix a vma validation check that mistakenly allows a private device-
dax mapping to be established. Device-dax explicitly forbids private
mappings so it can guarantee a given fault granularity and backing
memory type.
Both of these fixes have soaked in -next and are tagged for -stable.
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
device-dax: fail all private mapping attempts
device-dax: check devm_nsio_enable() return value
Linus Torvalds [Sat, 26 Nov 2016 20:18:59 +0000 (12:18 -0800)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
"Four fixes for bugs found by syzkaller on x86, all for stable"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: check for pic and ioapic presence before use
KVM: x86: fix out-of-bounds accesses of rtc_eoi map
KVM: x86: drop error recovery in em_jmp_far and em_ret_far
KVM: x86: fix out-of-bounds access in lapic
Linus Torvalds [Sat, 26 Nov 2016 19:24:03 +0000 (11:24 -0800)]
Merge tag 'powerpc-4.9-6' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Fixes marked for stable:
- Set missing wakeup bit in LPCR on POWER9
- Fix the early OPAL console wrappers
- Fixup kernel read only mapping
Fixes for code merged this cycle:
- Fix missing CRCs, add more asm-prototypes.h declarations"
* tag 'powerpc-4.9-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/mm: Fixup kernel read only mapping
powerpc/boot: Fix the early OPAL console wrappers
powerpc: Fix missing CRCs, add more asm-prototypes.h declarations
powerpc: Set missing wakeup bit in LPCR on POWER9
Jon Paul Maloy [Thu, 24 Nov 2016 23:47:07 +0000 (18:47 -0500)]
tipc: resolve connection flow control compatibility problem
In commit
10724cc7bb78 ("tipc: redesign connection-level flow control")
we replaced the previous message based flow control with one based on
1k blocks. In order to ensure backwards compatibility the mechanism
falls back to using message as base unit when it senses that the peer
doesn't support the new algorithm. The default flow control window,
i.e., how many units can be sent before the sender blocks and waits
for an acknowledge (aka advertisement) is 512. This was tested against
the previous version, which uses an acknowledge frequency of on ack per
256 received message, and found to work fine.
However, we missed the fact that versions older than Linux 3.15 use an
acknowledge frequency of 512, which is exactly the limit where a 4.6+
sender will stop and wait for acknowledge. This would also work fine if
it weren't for the fact that if the first sent message on a 4.6+ server
side is an empty SYNACK, this one is also is counted as a sent message,
while it is not counted as a received message on a legacy 3.15-receiver.
This leads to the sender always being one step ahead of the receiver, a
scenario causing the sender to block after 512 sent messages, while the
receiver only has registered 511 read messages. Hence, the legacy
receiver is not trigged to send an acknowledge, with a permanently
blocked sender as result.
We solve this deadlock by simply allowing the sender to send one more
message before it blocks, i.e., by a making minimal change to the
condition used for determining connection congestion.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Thu, 24 Nov 2016 16:28:12 +0000 (17:28 +0100)]
mvpp2: use correct size for memset
gcc-7 detects a short memset in mvpp2, introduced in the original
merge of the driver:
drivers/net/ethernet/marvell/mvpp2.c: In function 'mvpp2_cls_init':
drivers/net/ethernet/marvell/mvpp2.c:3296:2: error: 'memset' used with length equal to number of elements without multiplication by element size [-Werror=memset-elt-size]
The result seems to be that we write uninitialized data into the
flow table registers, although we did not get any warning about
that uninitialized data usage.
Using sizeof() lets us initialize then entire array instead.
Fixes:
3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Thu, 24 Nov 2016 13:58:33 +0000 (21:58 +0800)]
net/mlx5: drop duplicate header delay.h
Drop duplicate header delay.h from mlx5/core/main.c.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Acked-by: Matan Barak <matanb@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Thu, 24 Nov 2016 13:58:32 +0000 (21:58 +0800)]
net: ieee802154: drop duplicate header delay.h
Drop duplicate header delay.h from adf7242.c.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Acked-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Thu, 24 Nov 2016 13:58:29 +0000 (21:58 +0800)]
ibmvnic: drop duplicate header seq_file.h
Drop duplicate header seq_file.h from ibmvnic.c.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Thu, 24 Nov 2016 11:20:43 +0000 (14:20 +0300)]
fsl/fman: fix a leak in tgec_free()
We set "tgec->cfg" to NULL before passing it to kfree(). There is no
need to set it to NULL at all. Let's just delete it.
Fixes:
57ba4c9b56d8 ("fsl/fman: Add FMan MAC support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Miroslav Lichvar [Thu, 24 Nov 2016 09:55:06 +0000 (10:55 +0100)]
net: ethtool: don't require CAP_NET_ADMIN for ETHTOOL_GLINKSETTINGS
The ETHTOOL_GLINKSETTINGS command is deprecating the ETHTOOL_GSET
command and likewise it shouldn't require the CAP_NET_ADMIN capability.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Paul Maloy [Thu, 24 Nov 2016 04:46:09 +0000 (23:46 -0500)]
tipc: improve sanity check for received domain records
In commit
35c55c9877f8 ("tipc: add neighbor monitoring framework") we
added a data area to the link monitor STATE messages under the
assumption that previous versions did not use any such data area.
For versions older than Linux 4.3 this assumption is not correct. In
those version, all STATE messages sent out from a node inadvertently
contain a 16 byte data area containing a string; -a leftover from
previous RESET messages which were using this during the setup phase.
This string serves no purpose in STATE messages, and should no be there.
Unfortunately, this data area is delivered to the link monitor
framework, where a sanity check catches that it is not a correct domain
record, and drops it. It also issues a rate limited warning about the
event.
Since such events occur much more frequently than anticipated, we now
choose to remove the warning in order to not fill the kernel log with
useless contents. We also make the sanity check stricter, to further
reduce the risk that such data is inavertently admitted.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Paul Maloy [Thu, 24 Nov 2016 02:05:26 +0000 (21:05 -0500)]
tipc: fix compatibility bug in link monitoring
commit
817298102b0b ("tipc: fix link priority propagation") introduced a
compatibility problem between TIPC versions newer than Linux 4.6 and
those older than Linux 4.4. In versions later than 4.4, link STATE
messages only contain a non-zero link priority value when the sender
wants the receiver to change its priority. This has the effect that the
receiver resets itself in order to apply the new priority. This works
well, and is consistent with the said commit.
However, in versions older than 4.4 a valid link priority is present in
all sent link STATE messages, leading to cyclic link establishment and
reset on the 4.6+ node.
We fix this by adding a test that the received value should not only
be valid, but also differ from the current value in order to cause the
receiving link endpoint to reset.
Reported-by: Amar Nv <amar.nv005@gmail.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Wed, 23 Nov 2016 23:08:13 +0000 (00:08 +0100)]
net: ethernet: mvneta: Remove IFF_UNICAST_FLT which is not implemented
The mvneta driver advertises it supports IFF_UNICAST_FLT. However, it
actually does not. The hardware probably does support it, but there is
no code to configure the filter. As a quick and simple fix, remove the
flag. This will cause the core to fall back to promiscuous mode.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Fixes:
b50b72de2f2f ("net: mvneta: enable features before registering the driver")
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 26 Nov 2016 00:47:15 +0000 (16:47 -0800)]
Merge branch 'parisc-4.9-4' of git://git./linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
"On parisc we were still seeing occasional random segmentation faults
and memory corruption on SMP machines. Dave Anglin then looked again
at the TLB related code and found two issues in the PCI DMA and
generic TLB flush functions.
Then, in our startup code we had some timing of the cache and TLB
functions to calculate a threshold when to use a complete TLB/cache
flush or just to flush a specific range. This code produced a race
with newly started CPUs and thus lead to occasional kernel crashes
(due to stale TLB/cache entries). The patch by Dave fixes this issue
by flushing the local caches before starting secondary CPUs and by
removing the race.
The last problem fixed by this series is that we quite often suffered
from hung tasks and self-detected stalls on the CPUs. It was somehow
clear that this was related to the (in v4.7) newly introduced cr16
clocksource and the own implementation of sched_clock(). I replaced
the open-coded sched_clock() function and switched to the generic
sched_clock() implementation which seems to have fixed this isse as
well.
All patches have been sucessfully tested on a variety of machines,
including our debian buildd servers.
All patches (beside the small pr_cont fix) are tagged for stable
releases"
* 'parisc-4.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Also flush data TLB in flush_icache_page_asm
parisc: Fix race in pci-dma.c
parisc: Switch to generic sched_clock implementation
parisc: Fix races in parisc_setup_cache_timing()
parisc: Fix printk continuations in system detection
Linus Torvalds [Fri, 25 Nov 2016 23:53:45 +0000 (15:53 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/linux-security
Pull keys fixes from James Morris:
"From David:
- Fix mpi_powm()'s handling of a number with a zero exponent
[CVE-2016-8650].
Integrate my and Andrey's patches for mpi_powm() and use
mpi_resize() instead of RESIZE_IF_NEEDED() - the latter adds a
duplicate check into the execution path of a trivial case we
don't normally expect to be taken.
- Fix double free in X.509 error handling"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
mpi: Fix NULL ptr dereference in mpi_powm() [ver #3]
X.509: Fix double free in x509_cert_parse() [ver #3]
Linus Torvalds [Fri, 25 Nov 2016 23:44:47 +0000 (15:44 -0800)]
Fix subtle CONFIG_MODVERSIONS problems
CONFIG_MODVERSIONS has been broken for pretty much the whole 4.9 series,
and quite frankly, nobody has cared very deeply. We absolutely know how
to fix it, and it's not _complicated_, but it's not exactly pretty
either.
This oneliner fixes it without the ugliness, and allows for further
future cleanups.
"We've secretly replaced their regular MODVERSIONS with nothing at
all, let's see if they notice"
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 25 Nov 2016 23:16:51 +0000 (15:16 -0800)]
Merge tag 'acpi-4.9-rc7' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"Two ACPI fixes for 4.9-rc7.
One of them reverts a recent ACPI commit that attempted to improve
reboot/power-off on some systems, but introduced problems elsewhere,
and the other one fixes kernel builds with the new WDAT watchdog
driver enabled in some configurations.
Specifics:
- Revert the recent commit that caused the ACPI _PTS method to be
executed in the power-off/reboot code path (as per the
specification) in an attempt to improve things on some systems
(apparently expecting _PTS to be executed in that code path), but
broke power-off/reboot on at least one other machine (Rafael
Wysocki).
- Fix kernel builds with the new WDAT watchdog driver enabled in some
configurations by explicitly selecting WATCHDOG_CORE when enabling
the WDAT watchdog driver (Mika Westerberg)"
* tag 'acpi-4.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
watchdog: wdat_wdt: Select WATCHDOG_CORE
Revert "ACPI: Execute _PTS before system reboot"
Rafael J. Wysocki [Thu, 24 Nov 2016 23:13:56 +0000 (00:13 +0100)]
MAINTAINERS: Add bug tracking system location entry type
Following the kernel Bugzilla discussion during the Kernel Summit
(https://lwn.net/Articles/705245/), add bug tracking system location
entry type (B) to MAINTAINERS and populate it for several subsystems
known to be using the kernel BZ actively (and add the upstream BZ for
ACPICA too).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jarkko Nikula [Fri, 25 Nov 2016 15:22:27 +0000 (17:22 +0200)]
Revert "i2c: designware: do not disable adapter after transfer"
This reverts commit
0317e6c0f1dc1ba86b8d9dccc010c5e77b8355fa.
Srinivas reported recently touchscreen and touchpad stopped working in
Haswell based machine in Linux 4.9-rc series with timeout errors from
i2c_designware:
[ 16.508013] i2c_designware INT33C3:00: controller timed out
[ 16.508302] i2c_hid i2c-MSFT0001:02: failed to change power setting.
[ 17.532016] i2c_designware INT33C3:00: controller timed out
[ 18.556022] i2c_designware INT33C3:00: controller timed out
[ 18.556315] i2c_hid i2c-ATML1000:00: failed to retrieve report from device.
I managed to reproduce similar errors on another Haswell based machine
where touchscreen initialization fails maybe in every 1/5 - 1/2 boots.
Since root cause for these errors is not clear yet and debugging is
ongoing it's better to revert this commit as we are near to release.
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Rafael J. Wysocki [Fri, 25 Nov 2016 21:24:07 +0000 (22:24 +0100)]
Merge branches 'acpi-sleep-fixes' and 'acpi-wdat-fixes'
* acpi-sleep-fixes:
Revert "ACPI: Execute _PTS before system reboot"
* acpi-wdat-fixes:
watchdog: wdat_wdt: Select WATCHDOG_CORE
David S. Miller [Fri, 25 Nov 2016 21:17:12 +0000 (16:17 -0500)]
Merge tag 'linux-can-fixes-for-4.9-
20161123' of git://git./linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2016-11-23
this is a pull request for net/master.
The patch by Oliver Hartkopp for the broadcast manager (bcm) fixes the
CAN-FD support, which may cause an out-of-bounds access otherwise.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Wed, 23 Nov 2016 14:24:35 +0000 (22:24 +0800)]
dwc_eth_qos: drop duplicate headers
Drop duplicate headers types.h and delay.h from dwc_eth_qos.c.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 25 Nov 2016 19:36:35 +0000 (11:36 -0800)]
Merge tag 'mfd-fixes-4.9.1' of git://git./linux/kernel/git/lee/mfd
Pull MFD fixes from Lee Jones:
"Received a copule of last minute fixes for v4.9.
The patches from Viresh are fixing issues displayed in KernelCI"
* tag 'mfd-fixes-4.9.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
mfd: wm8994-core: Don't use managed regulator bulk get API
mfd: wm8994-core: Disable regulators before removing them
mfd: syscon: Support native-endian regmaps
Linus Torvalds [Fri, 25 Nov 2016 19:31:01 +0000 (11:31 -0800)]
Merge tag 'media/v4.9-4' of git://git./linux/kernel/git/mchehab/linux-media
Pull media fix from Mauro Carvalho Chehab:
"Fix for the firmware load logic of the tuner-xc2028 driver"
* tag 'media/v4.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
xc2028: Fix use-after-free bug properly
Linus Torvalds [Fri, 25 Nov 2016 18:51:35 +0000 (10:51 -0800)]
Merge tag 'drm-fixes-for-v4.9-rc7' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Seems to be quietening down nicely, a few mediatek, one exynos and one
hdlcd fix, along with two amd fixes"
* tag 'drm-fixes-for-v4.9-rc7' of git://people.freedesktop.org/~airlied/linux:
gpu/drm/exynos/exynos_hdmi - Unmap region obtained by of_iomap
drm/mediatek: fix null pointer dereference
drm/mediatek: fixed the calc method of data rate per lane
drm/mediatek: fix a typo of DISP_OD_CFG to OD_RELAYMODE
drm/radeon: fix power state when port pm is unavailable (v2)
drm/amdgpu: fix power state when port pm is unavailable
drm/arm: hdlcd: fix plane base address update
drm/amd/powerplay: avoid out of bounds access on array ps.
John David Anglin [Fri, 25 Nov 2016 01:18:14 +0000 (20:18 -0500)]
parisc: Also flush data TLB in flush_icache_page_asm
This is the second issue I noticed in reviewing the parisc TLB code.
The fic instruction may use either the instruction or data TLB in
flushing the instruction cache. Thus, on machines with a split TLB, we
should also flush the data TLB after setting up the temporary alias
registers.
Although this has no functional impact, I changed the pdtlb and pitlb
instructions to consistently use the index register %r0. These
instructions do not support integer displacements.
Tested on rp3440 and c8000.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: <stable@vger.kernel.org> # v3.16+
Signed-off-by: Helge Deller <deller@gmx.de>
John David Anglin [Fri, 25 Nov 2016 01:06:32 +0000 (20:06 -0500)]
parisc: Fix race in pci-dma.c
We are still troubled by occasional random segmentation faults and
memory memory corruption on SMP machines. The causes quite a few
package builds to fail on the Debian buildd machines for parisc. When
gcc-6 failed to build three times in a row, I looked again at the TLB
related code. I found a couple of issues. This is the first.
In general, we need to ensure page table updates and corresponding TLB
purges are atomic. The attached patch fixes an instance in pci-dma.c
where the page table update was not guarded by the TLB lock.
Tested on rp3440 and c8000. So far, no further random segmentation
faults have been observed.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: <stable@vger.kernel.org> # v3.16+
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Tue, 22 Nov 2016 17:08:30 +0000 (18:08 +0100)]
parisc: Switch to generic sched_clock implementation
Drop the open-coded sched_clock() function and replace it by the provided
GENERIC_SCHED_CLOCK implementation. We have seen quite some hung tasks in the
past, which seem to be fixed by this patch.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v4.7+
Signed-off-by: Helge Deller <deller@gmx.de>
John David Anglin [Mon, 21 Nov 2016 02:12:36 +0000 (21:12 -0500)]
parisc: Fix races in parisc_setup_cache_timing()
Helge reported to me the following startup crash:
[ 0.000000] Linux version 4.8.0-1-parisc64-smp (debian-kernel@lists.debian.org) (gcc version 5.4.1
20161019 (GCC) ) #1 SMP Debian 4.8.7-1 (2016-11-13)
[ 0.000000] The 64-bit Kernel has started...
[ 0.000000] Kernel default page size is 4 KB. Huge pages enabled with 1 MB physical and 2 MB virtual size.
[ 0.000000] Determining PDC firmware type: System Map.
[ 0.000000] model 9000/785/J5000
[ 0.000000] Total Memory: 2048 MB
[ 0.000000] Memory: 2018528K/2097152K available (9272K kernel code, 3053K rwdata, 1319K rodata, 1024K init, 840K bss, 78624K reserved, 0K cma-reserved)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] vmalloc : 0x0000000000008000 - 0x000000003f000000 (1007 MB)
[ 0.000000] memory : 0x0000000040000000 - 0x00000000c0000000 (2048 MB)
[ 0.000000] .init : 0x0000000040100000 - 0x0000000040200000 (1024 kB)
[ 0.000000] .data : 0x0000000040b0e000 - 0x0000000040f533e0 (4372 kB)
[ 0.000000] .text : 0x0000000040200000 - 0x0000000040b0e000 (9272 kB)
[ 0.768910] Brought up 1 CPUs
[ 0.992465] NET: Registered protocol family 16
[ 2.429981] Releasing cpu 1 now, hpa=
fffffffffffa2000
[ 2.635751] CPU(s): 2 out of 2 PA8500 (PCX-W) at 440.000000 MHz online
[ 2.726692] Setting cache flush threshold to 1024 kB
[ 2.729932] Not-handled unaligned insn 0x43ffff80
[ 2.798114] Setting TLB flush threshold to 140 kB
[ 2.928039] Unaligned handler failed, ret = -1
[ 3.000419] _______________________________
[ 3.000419] < Your System ate a SPARC! Gah! >
[ 3.000419] -------------------------------
[ 3.000419] \ ^__^
[ 3.000419] (__)\ )\/\
[ 3.000419] U ||----w |
[ 3.000419] || ||
[ 9.340055] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.8.0-1-parisc64-smp #1 Debian 4.8.7-1
[ 9.448082] task:
00000000bfd48060 task.stack:
00000000bfd50000
[ 9.528040]
[ 10.760029] IASQ:
0000000000000000 0000000000000000 IAOQ:
000000004025d154 000000004025d158
[ 10.868052] IIR:
43ffff80 ISR:
0000000000340000 IOR:
000001ff54150960
[ 10.960029] CPU: 1 CR30:
00000000bfd50000 CR31:
0000000011111111
[ 11.052057] ORIG_R28:
000000004021e3b4
[ 11.100045] IAOQ[0]: irq_exit+0x94/0x120
[ 11.152062] IAOQ[1]: irq_exit+0x98/0x120
[ 11.208031] RP(r2): irq_exit+0xb8/0x120
[ 11.256074] Backtrace:
[ 11.288067] [<
00000000402cd944>] cpu_startup_entry+0x1e4/0x598
[ 11.368058] [<
0000000040109528>] smp_callin+0x2c0/0x2f0
[ 11.436308] [<
00000000402b53fc>] update_curr+0x18c/0x2d0
[ 11.508055] [<
00000000402b73b8>] dequeue_entity+0x2c0/0x1030
[ 11.584040] [<
00000000402b3cc0>] set_next_entity+0x80/0xd30
[ 11.660069] [<
00000000402c1594>] pick_next_task_fair+0x614/0x720
[ 11.740085] [<
000000004020dd34>] __schedule+0x394/0xa60
[ 11.808054] [<
000000004020e488>] schedule+0x88/0x118
[ 11.876039] [<
0000000040283d3c>] rescuer_thread+0x4d4/0x5b0
[ 11.948090] [<
000000004028fc4c>] kthread+0x1ec/0x248
[ 12.016053] [<
0000000040205020>] end_fault_vector+0x20/0xc0
[ 12.092239] [<
00000000402050c0>] _switch_to_ret+0x0/0xf40
[ 12.164044]
[ 12.184036] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.8.0-1-parisc64-smp #1 Debian 4.8.7-1
[ 12.244040] Backtrace:
[ 12.244040] [<
000000004021c480>] show_stack+0x68/0x80
[ 12.244040] [<
00000000406f332c>] dump_stack+0xec/0x168
[ 12.244040] [<
000000004021c74c>] die_if_kernel+0x25c/0x430
[ 12.244040] [<
000000004022d320>] handle_unaligned+0xb48/0xb50
[ 12.244040]
[ 12.632066] ---[ end trace
9ca05a7215c7bbb2 ]---
[ 12.692036] Kernel panic - not syncing: Attempted to kill the idle task!
We have the insn 0x43ffff80 in IIR but from IAOQ we should have:
4025d150: 0f f3 20 df ldd,s r19(r31),r31
4025d154: 0f 9f 00 9c ldw r31(ret0),ret0
4025d158: bf 80 20 58 cmpb,*<> r0,ret0,
4025d18c <irq_exit+0xcc>
Cpu0 has just completed running parisc_setup_cache_timing:
[ 2.429981] Releasing cpu 1 now, hpa=
fffffffffffa2000
[ 2.635751] CPU(s): 2 out of 2 PA8500 (PCX-W) at 440.000000 MHz online
[ 2.726692] Setting cache flush threshold to 1024 kB
[ 2.729932] Not-handled unaligned insn 0x43ffff80
[ 2.798114] Setting TLB flush threshold to 140 kB
[ 2.928039] Unaligned handler failed, ret = -1
From the backtrace, cpu1 is in smp_callin:
void __init smp_callin(void)
{
int slave_id = cpu_now_booting;
smp_cpu_init(slave_id);
preempt_disable();
flush_cache_all_local(); /* start with known state */
flush_tlb_all_local(NULL);
local_irq_enable(); /* Interrupts have been off until now */
cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
So, it has just flushed its caches and the TLB. It would seem either the
flushes in parisc_setup_cache_timing or smp_callin have corrupted kernel
memory.
The attached patch reworks parisc_setup_cache_timing to remove the races
in setting the cache and TLB flush thresholds. It also corrects the
number of bytes flushed in the TLB calculation.
The patch flushes the cache and TLB on cpu0 before starting the
secondary processors so that they are started from a known state.
Tested with a few reboots on c8000.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: <stable@vger.kernel.org> # v3.18+
Signed-off-by: Helge Deller <deller@gmx.de>
Viresh Kumar [Thu, 27 Oct 2016 10:20:18 +0000 (15:50 +0530)]
mfd: wm8994-core: Don't use managed regulator bulk get API
The kernel WARNs and then crashes today if wm8994_device_init() fails
after calling devm_regulator_bulk_get().
That happens because there are multiple devices involved here and the
order in which managed resources are freed isn't correct.
The regulators are added as children of wm8994->dev. Whereas,
devm_regulator_bulk_get() receives wm8994->dev as the device, though it
gets the same regulators which were added as children of wm8994->dev
earlier.
During failures, the children are removed first and the core eventually
calls regulator_unregister() for them. As regulator_put() was never done
for them (opposite of devm_regulator_bulk_get()), the kernel WARNs at
WARN_ON(rdev->open_count);
And eventually it crashes from debugfs_remove_recursive().
--------x------------------x----------------
wm8994 3-001a: Device is not a WM8994, ID is 0
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at /mnt/ssd/all/work/repos/devel/linux/drivers/regulator/core.c:4072 regulator_unregister+0xc8/0xd0
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.8.0-rc6-00154-g54fe84cbd50b #41
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[<
c010e24c>] (unwind_backtrace) from [<
c010af38>] (show_stack+0x10/0x14)
[<
c010af38>] (show_stack) from [<
c032a1c4>] (dump_stack+0x88/0x9c)
[<
c032a1c4>] (dump_stack) from [<
c011a98c>] (__warn+0xe8/0x100)
[<
c011a98c>] (__warn) from [<
c011aa54>] (warn_slowpath_null+0x20/0x28)
[<
c011aa54>] (warn_slowpath_null) from [<
c0384a0c>] (regulator_unregister+0xc8/0xd0)
[<
c0384a0c>] (regulator_unregister) from [<
c0406434>] (release_nodes+0x16c/0x1dc)
[<
c0406434>] (release_nodes) from [<
c04039c4>] (__device_release_driver+0x8c/0x110)
[<
c04039c4>] (__device_release_driver) from [<
c0403a64>] (device_release_driver+0x1c/0x28)
[<
c0403a64>] (device_release_driver) from [<
c0402b24>] (bus_remove_device+0xd8/0x104)
[<
c0402b24>] (bus_remove_device) from [<
c03ffcd8>] (device_del+0x10c/0x218)
[<
c03ffcd8>] (device_del) from [<
c0404e4c>] (platform_device_del+0x1c/0x88)
[<
c0404e4c>] (platform_device_del) from [<
c0404ec4>] (platform_device_unregister+0xc/0x20)
[<
c0404ec4>] (platform_device_unregister) from [<
c0428bc0>] (mfd_remove_devices_fn+0x5c/0x64)
[<
c0428bc0>] (mfd_remove_devices_fn) from [<
c03ff9d8>] (device_for_each_child_reverse+0x4c/0x78)
[<
c03ff9d8>] (device_for_each_child_reverse) from [<
c04288c4>] (mfd_remove_devices+0x20/0x30)
[<
c04288c4>] (mfd_remove_devices) from [<
c042758c>] (wm8994_device_init+0x2ac/0x7f0)
[<
c042758c>] (wm8994_device_init) from [<
c04f14a8>] (i2c_device_probe+0x178/0x1fc)
[<
c04f14a8>] (i2c_device_probe) from [<
c04036fc>] (driver_probe_device+0x214/0x2c0)
[<
c04036fc>] (driver_probe_device) from [<
c0403854>] (__driver_attach+0xac/0xb0)
[<
c0403854>] (__driver_attach) from [<
c0401a74>] (bus_for_each_dev+0x68/0x9c)
[<
c0401a74>] (bus_for_each_dev) from [<
c0402cf0>] (bus_add_driver+0x1a0/0x218)
[<
c0402cf0>] (bus_add_driver) from [<
c040406c>] (driver_register+0x78/0xf8)
[<
c040406c>] (driver_register) from [<
c04f20a0>] (i2c_register_driver+0x34/0x84)
[<
c04f20a0>] (i2c_register_driver) from [<
c01017d0>] (do_one_initcall+0x40/0x170)
[<
c01017d0>] (do_one_initcall) from [<
c0a00dbc>] (kernel_init_freeable+0x15c/0x1fc)
[<
c0a00dbc>] (kernel_init_freeable) from [<
c06e07b0>] (kernel_init+0x8/0x114)
[<
c06e07b0>] (kernel_init) from [<
c0107978>] (ret_from_fork+0x14/0x3c)
---[ end trace
0919d3d0bc998260 ]---
[snip..]
Unable to handle kernel NULL pointer dereference at virtual address
00000078
pgd =
c0004000
[
00000078] *pgd=
00000000
Internal error: Oops: 5 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.8.0-rc6-00154-g54fe84cbd50b #41
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
task:
ee874000 task.stack:
ee878000
PC is at down_write+0x14/0x54
LR is at debugfs_remove_recursive+0x30/0x150
[snip..]
[<
c06e489c>] (down_write) from [<
c02e9954>] (debugfs_remove_recursive+0x30/0x150)
[<
c02e9954>] (debugfs_remove_recursive) from [<
c0382b78>] (_regulator_put+0x24/0xac)
[<
c0382b78>] (_regulator_put) from [<
c0382c1c>] (regulator_put+0x1c/0x2c)
[<
c0382c1c>] (regulator_put) from [<
c0406434>] (release_nodes+0x16c/0x1dc)
[<
c0406434>] (release_nodes) from [<
c04035d4>] (driver_probe_device+0xec/0x2c0)
[<
c04035d4>] (driver_probe_device) from [<
c0403854>] (__driver_attach+0xac/0xb0)
[<
c0403854>] (__driver_attach) from [<
c0401a74>] (bus_for_each_dev+0x68/0x9c)
[<
c0401a74>] (bus_for_each_dev) from [<
c0402cf0>] (bus_add_driver+0x1a0/0x218)
[<
c0402cf0>] (bus_add_driver) from [<
c040406c>] (driver_register+0x78/0xf8)
[<
c040406c>] (driver_register) from [<
c04f20a0>] (i2c_register_driver+0x34/0x84)
[<
c04f20a0>] (i2c_register_driver) from [<
c01017d0>] (do_one_initcall+0x40/0x170)
[<
c01017d0>] (do_one_initcall) from [<
c0a00dbc>] (kernel_init_freeable+0x15c/0x1fc)
[<
c0a00dbc>] (kernel_init_freeable) from [<
c06e07b0>] (kernel_init+0x8/0x114)
[<
c06e07b0>] (kernel_init) from [<
c0107978>] (ret_from_fork+0x14/0x3c)
Code:
e1a04000 f590f000 e3a03001 e34f3fff (
e1902f9f)
---[ end trace
0919d3d0bc998262 ]---
--------x------------------x----------------
Fix the kernel warnings and crashes by using regulator_bulk_get()
instead of devm_regulator_bulk_get() and explicitly freeing the supplies
in exit paths.
Tested on Exynos 5250, dual core ARM A15 machine.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Viresh Kumar [Fri, 16 Sep 2016 03:26:59 +0000 (08:56 +0530)]
mfd: wm8994-core: Disable regulators before removing them
The order in which resources were freed in wm8994_device_exit() isn't
correct. The regulators are removed before they are disabled.
Fix it by reordering code a bit, which makes it exact opposite of
wm8994_device_init() as well.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Matt Redfearn [Wed, 9 Nov 2016 13:26:25 +0000 (13:26 +0000)]
MIPS: mm: Fix output of __do_page_fault
Since commit
4bcc595ccd80 ("printk: reinstate KERN_CONT for printing
continuation lines") the output from __do_page_fault on MIPS has been
pretty unreadable due to the lack of KERN_CONT markers. Use pr_cont
to provide the appropriate markers & restore the expected output.
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14544/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Fri, 14 Oct 2016 09:17:31 +0000 (10:17 +0100)]
mfd: syscon: Support native-endian regmaps
The regmap devicetree binding documentation states that a native-endian
property should be supported as well as big-endian & little-endian,
however syscon in its duplication of the parsing of these properties
omits support for native-endian. Fix this by setting
REGMAP_ENDIAN_NATIVE when a native-endian property is found.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Dave Airlie [Fri, 25 Nov 2016 04:21:26 +0000 (14:21 +1000)]
Merge branch 'mediatek-drm-fixes-2016-11-24' of https://github.com/ckhu-mediatek/linux.git-tags into drm-fixes
This branch include patches of fixing a typo, accurate dsi frame rate,
and fixing null pointer dereference.
* 'mediatek-drm-fixes-2016-11-24' of https://github.com/ckhu-mediatek/linux.git-tags:
drm/mediatek: fix null pointer dereference
drm/mediatek: fixed the calc method of data rate per lane
drm/mediatek: fix a typo of DISP_OD_CFG to OD_RELAYMODE
Aneesh Kumar K.V [Thu, 24 Nov 2016 09:39:54 +0000 (15:09 +0530)]
powerpc/mm: Fixup kernel read only mapping
With commit
e58e87adc8bf9 ("powerpc/mm: Update _PAGE_KERNEL_RO") we
started using the ppp value 0b110 to map kernel readonly. But that
facility was only added as part of ISA 2.04. For earlier ISA version
only supported ppp bit value for readonly mapping is 0b011. (This
implies both user and kernel get mapped using the same ppp bit value for
readonly mapping.).
Update the code such that for earlier architecture version we use ppp
value 0b011 for readonly mapping. We don't differentiate between power5+
and power5 here and apply the new ppp bits only from power6 (ISA 2.05).
This keep the changes minimal.
This fixes issue with PS3 spu usage reported at
https://lkml.kernel.org/r/rep.
1421449714.geoff@infradead.org
Fixes:
e58e87adc8bf9 ("powerpc/mm: Update _PAGE_KERNEL_RO")
Cc: stable@vger.kernel.org # v4.7+
Tested-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Andrey Ryabinin [Thu, 24 Nov 2016 13:23:10 +0000 (13:23 +0000)]
mpi: Fix NULL ptr dereference in mpi_powm() [ver #3]
This fixes CVE-2016-8650.
If mpi_powm() is given a zero exponent, it wants to immediately return
either 1 or 0, depending on the modulus. However, if the result was
initalised with zero limb space, no limbs space is allocated and a
NULL-pointer exception ensues.
Fix this by allocating a minimal amount of limb space for the result when
the 0-exponent case when the result is 1 and not touching the limb space
when the result is 0.
This affects the use of RSA keys and X.509 certificates that carry them.
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<
ffffffff8138ce5d>] mpi_powm+0x32/0x7e6
PGD 0
Oops: 0002 [#1] SMP
Modules linked in:
CPU: 3 PID: 3014 Comm: keyctl Not tainted 4.9.0-rc6-fscache+ #278
Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014
task:
ffff8804011944c0 task.stack:
ffff880401294000
RIP: 0010:[<
ffffffff8138ce5d>] [<
ffffffff8138ce5d>] mpi_powm+0x32/0x7e6
RSP: 0018:
ffff880401297ad8 EFLAGS:
00010212
RAX:
0000000000000000 RBX:
ffff88040868bec0 RCX:
ffff88040868bba0
RDX:
ffff88040868b260 RSI:
ffff88040868bec0 RDI:
ffff88040868bee0
RBP:
ffff880401297ba8 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000047 R11:
ffffffff8183b210 R12:
0000000000000000
R13:
ffff8804087c7600 R14:
000000000000001f R15:
ffff880401297c50
FS:
00007f7a7918c700(0000) GS:
ffff88041fb80000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000000000000 CR3:
0000000401250000 CR4:
00000000001406e0
Stack:
ffff88040868bec0 0000000000000020 ffff880401297b00 ffffffff81376cd4
0000000000000100 ffff880401297b10 ffffffff81376d12 ffff880401297b30
ffffffff81376f37 0000000000000100 0000000000000000 ffff880401297ba8
Call Trace:
[<
ffffffff81376cd4>] ? __sg_page_iter_next+0x43/0x66
[<
ffffffff81376d12>] ? sg_miter_get_next_page+0x1b/0x5d
[<
ffffffff81376f37>] ? sg_miter_next+0x17/0xbd
[<
ffffffff8138ba3a>] ? mpi_read_raw_from_sgl+0xf2/0x146
[<
ffffffff8132a95c>] rsa_verify+0x9d/0xee
[<
ffffffff8132acca>] ? pkcs1pad_sg_set_buf+0x2e/0xbb
[<
ffffffff8132af40>] pkcs1pad_verify+0xc0/0xe1
[<
ffffffff8133cb5e>] public_key_verify_signature+0x1b0/0x228
[<
ffffffff8133d974>] x509_check_for_self_signed+0xa1/0xc4
[<
ffffffff8133cdde>] x509_cert_parse+0x167/0x1a1
[<
ffffffff8133d609>] x509_key_preparse+0x21/0x1a1
[<
ffffffff8133c3d7>] asymmetric_key_preparse+0x34/0x61
[<
ffffffff812fc9f3>] key_create_or_update+0x145/0x399
[<
ffffffff812fe227>] SyS_add_key+0x154/0x19e
[<
ffffffff81001c2b>] do_syscall_64+0x80/0x191
[<
ffffffff816825e4>] entry_SYSCALL64_slow_path+0x25/0x25
Code: 56 41 55 41 54 53 48 81 ec a8 00 00 00 44 8b 71 04 8b 42 04 4c 8b 67 18 45 85 f6 89 45 80 0f 84 b4 06 00 00 85 c0 75 2f 41 ff ce <49> c7 04 24 01 00 00 00 b0 01 75 0b 48 8b 41 18 48 83 38 01 0f
RIP [<
ffffffff8138ce5d>] mpi_powm+0x32/0x7e6
RSP <
ffff880401297ad8>
CR2:
0000000000000000
---[ end trace
d82015255d4a5d8d ]---
Basically, this is a backport of a libgcrypt patch:
http://git.gnupg.org/cgi-bin/gitweb.cgi?p=libgcrypt.git;a=patch;h=
6e1adb05d290aeeb1c230c763970695f4a538526
Fixes:
cdec9cb5167a ("crypto: GnuPG based MPI lib - source files (part 1)")
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
cc: linux-ima-devel@lists.sourceforge.net
cc: stable@vger.kernel.org
Signed-off-by: James Morris <james.l.morris@oracle.com>
Andrey Ryabinin [Thu, 24 Nov 2016 13:23:03 +0000 (13:23 +0000)]
X.509: Fix double free in x509_cert_parse() [ver #3]
We shouldn't free cert->pub->key in x509_cert_parse() because
x509_free_certificate() also does this:
BUG: Double free or freeing an invalid pointer
...
Call Trace:
[<
ffffffff81896c20>] dump_stack+0x63/0x83
[<
ffffffff81356571>] kasan_object_err+0x21/0x70
[<
ffffffff81356ed9>] kasan_report_double_free+0x49/0x60
[<
ffffffff813561ad>] kasan_slab_free+0x9d/0xc0
[<
ffffffff81350b7a>] kfree+0x8a/0x1a0
[<
ffffffff81844fbf>] public_key_free+0x1f/0x30
[<
ffffffff818455d4>] x509_free_certificate+0x24/0x90
[<
ffffffff818460bc>] x509_cert_parse+0x2bc/0x300
[<
ffffffff81846cae>] x509_key_preparse+0x3e/0x330
[<
ffffffff818444cf>] asymmetric_key_preparse+0x6f/0x100
[<
ffffffff8178bec0>] key_create_or_update+0x260/0x5f0
[<
ffffffff8178e6d9>] SyS_add_key+0x199/0x2a0
[<
ffffffff821d823b>] entry_SYSCALL_64_fastpath+0x1e/0xad
Object at
ffff880110bd1900, in cache kmalloc-512 size: 512
....
Freed:
PID = 2579
[<
ffffffff8104283b>] save_stack_trace+0x1b/0x20
[<
ffffffff813558f6>] save_stack+0x46/0xd0
[<
ffffffff81356183>] kasan_slab_free+0x73/0xc0
[<
ffffffff81350b7a>] kfree+0x8a/0x1a0
[<
ffffffff818460a3>] x509_cert_parse+0x2a3/0x300
[<
ffffffff81846cae>] x509_key_preparse+0x3e/0x330
[<
ffffffff818444cf>] asymmetric_key_preparse+0x6f/0x100
[<
ffffffff8178bec0>] key_create_or_update+0x260/0x5f0
[<
ffffffff8178e6d9>] SyS_add_key+0x199/0x2a0
[<
ffffffff821d823b>] entry_SYSCALL_64_fastpath+0x1e/0xad
Fixes:
db6c43bd2132 ("crypto: KEYS: convert public key and digsig asym to the akcipher api")
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Arvind Yadav [Wed, 19 Oct 2016 10:04:16 +0000 (15:34 +0530)]
gpu/drm/exynos/exynos_hdmi - Unmap region obtained by of_iomap
Free memory mapping, if hdmi_probe is not successful.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
David S. Miller [Thu, 24 Nov 2016 21:24:20 +0000 (16:24 -0500)]
Merge branch 'for-upstream' of git://git./linux/kernel/git/bluetooth/bluetooth
Johan Hedberg says:
====================
pull request: bluetooth 2016-11-23
Sorry about the late pull request for 4.9, but we have one more
important Bluetooth patch that should make it to the release. It fixes
connection creation for Bluetooth LE controllers that do not have a
public address (only a random one).
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Roman Mashak [Wed, 23 Nov 2016 01:57:04 +0000 (20:57 -0500)]
net sched filters: fix filter handle ID in tfilter_notify_chain()
Should pass valid filter handle, not the netlink flags.
Fixes:
30a391a13ab92 ("net sched filters: pass netlink message flags in event notification")
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reported-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Tue, 22 Nov 2016 19:40:58 +0000 (11:40 -0800)]
net: dsa: bcm_sf2: Ensure we re-negotiate EEE during after link change
In case the link change and EEE is enabled or disabled, always try to
re-negotiate this with the link partner.
Fixes:
450b05c15f9c ("net: dsa: bcm_sf2: add support for controlling EEE")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andy Gospodarek [Tue, 22 Nov 2016 18:14:08 +0000 (13:14 -0500)]
bnxt: do not busy-poll when link is down
When busy polling while a link is down (during a link-flap test), TX
timeouts were observed as well as the following messages in the ring
buffer:
bnxt_en 0008:01:00.2 enP8p1s0f2d2: Resp cmpl intr err msg: 0x51
bnxt_en 0008:01:00.2 enP8p1s0f2d2: hwrm_ring_free tx failed. rc:-1
bnxt_en 0008:01:00.2 enP8p1s0f2d2: Resp cmpl intr err msg: 0x51
bnxt_en 0008:01:00.2 enP8p1s0f2d2: hwrm_ring_free rx failed. rc:-1
These were resolved by checking for link status and returning if link
was not up.
Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Tested-by: Rob Miller <rob.miller@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 22 Nov 2016 17:06:45 +0000 (09:06 -0800)]
udplite: call proper backlog handlers
In commits
93821778def10 ("udp: Fix rcv socket locking") and
f7ad74fef3af ("net/ipv6/udp: UDP encapsulation: break backlog_rcv into
__udpv6_queue_rcv_skb") UDP backlog handlers were renamed, but UDPlite
was forgotten.
This leads to crashes if UDPlite header is pulled twice, which happens
starting from commit
e6afc8ace6dd ("udp: remove headers from UDP packets
before queueing")
Bug found by syzkaller team, thanks a lot guys !
Note that backlog use in UDP/UDPlite is scheduled to be removed starting
from linux-4.10, so this patch is only needed up to linux-4.9
Fixes:
93821778def1 ("udp: Fix rcv socket locking")
Fixes:
f7ad74fef3af ("net/ipv6/udp: UDP encapsulation: break backlog_rcv into __udpv6_queue_rcv_skb")
Fixes:
e6afc8ace6dd ("udp: remove headers from UDP packets before queueing")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 24 Nov 2016 18:51:18 +0000 (10:51 -0800)]
Merge tag 'mmc-v4.9-rc5' of git://git./linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC host:
- sdhci-of-esdhc: Fix card detection
- dw_mmc: Fix DMA error path"
* tag 'mmc-v4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: dw_mmc: fix the error handling for dma operation
mmc: sdhci-of-esdhc: fixup PRESENT_STATE read
Linus Torvalds [Thu, 24 Nov 2016 18:38:20 +0000 (10:38 -0800)]
Merge tag 'usb-4.9-rc7' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a few small USB fixes and new device ids for 4.9-rc7.
The majority of these fixes are in the musb driver, fixing a number of
regressions that have been reported but took a while to resolve. The
other fixes are all small ones, to resolve other reported minor
issues.
All have been in linux-next for a while with no reported issues"
* tag 'usb-4.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: gadget: f_fs: fix wrong parenthesis in ffs_func_req_match()
phy: twl4030-usb: Fix for musb session bit based PM
usb: musb: Drop pointless PM runtime code for dsps glue
usb: musb: Add missing pm_runtime_disable and drop 2430 PM timeout
usb: musb: Fix PM for hub disconnect
usb: musb: Fix sleeping function called from invalid context for hdrc glue
usb: musb: Fix broken use of static variable for multiple instances
USB: serial: cp210x: add ID for the Zone DPMX
usb: chipidea: move the lock initialization to core file
Fix USB CB/CBI storage devices with CONFIG_VMAP_STACK=y
USB: serial: ftdi_sio: add support for TI CC3200 LaunchPad
Linus Torvalds [Thu, 24 Nov 2016 17:40:26 +0000 (09:40 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/hid
Pull HID fixes from Jiri Kosina:
- DMA-on-stack fixes for a couple drivers, from Benjamin Tissoires
- small memory sanitization fix for sensor-hub driver, from Song
Hongyan
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: hid-sensor-hub: clear memory to avoid random data
HID: rmi: make transfer buffers DMA capable
HID: magicmouse: make transfer buffers DMA capable
HID: lg: make transfer buffers DMA capable
HID: cp2112: make transfer buffers DMA capable
Radim Krčmář [Wed, 23 Nov 2016 20:25:48 +0000 (21:25 +0100)]
KVM: x86: check for pic and ioapic presence before use
Split irqchip allows pic and ioapic routes to be used without them being
created, which results in NULL access. Check for NULL and avoid it.
(The setup is too racy for a nicer solutions.)
Found by syzkaller:
general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN
Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in:
CPU: 3 PID: 11923 Comm: kworker/3:2 Not tainted 4.9.0-rc5+ #27
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Workqueue: events irqfd_inject
task:
ffff88006a06c7c0 task.stack:
ffff880068638000
RIP: 0010:[...] [...] __lock_acquire+0xb35/0x3380 kernel/locking/lockdep.c:3221
RSP: 0000:
ffff88006863ea20 EFLAGS:
00010006
RAX:
dffffc0000000000 RBX:
dffffc0000000000 RCX:
0000000000000000
RDX:
0000000000000039 RSI:
0000000000000000 RDI:
1ffff1000d0c7d9e
RBP:
ffff88006863ef58 R08:
0000000000000001 R09:
0000000000000000
R10:
00000000000001c8 R11:
0000000000000000 R12:
ffff88006a06c7c0
R13:
0000000000000001 R14:
ffffffff8baab1a0 R15:
0000000000000001
FS:
0000000000000000(0000) GS:
ffff88006d100000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00000000004abdd0 CR3:
000000003e2f2000 CR4:
00000000000026e0
Stack:
ffffffff894d0098 1ffff1000d0c7d56 ffff88006863ecd0 dffffc0000000000
ffff88006a06c7c0 0000000000000000 ffff88006863ecf8 0000000000000082
0000000000000000 ffffffff815dd7c1 ffffffff00000000 ffffffff00000000
Call Trace:
[...] lock_acquire+0x2a2/0x790 kernel/locking/lockdep.c:3746
[...] __raw_spin_lock include/linux/spinlock_api_smp.h:144
[...] _raw_spin_lock+0x38/0x50 kernel/locking/spinlock.c:151
[...] spin_lock include/linux/spinlock.h:302
[...] kvm_ioapic_set_irq+0x4c/0x100 arch/x86/kvm/ioapic.c:379
[...] kvm_set_ioapic_irq+0x8f/0xc0 arch/x86/kvm/irq_comm.c:52
[...] kvm_set_irq+0x239/0x640 arch/x86/kvm/../../../virt/kvm/irqchip.c:101
[...] irqfd_inject+0xb4/0x150 arch/x86/kvm/../../../virt/kvm/eventfd.c:60
[...] process_one_work+0xb40/0x1ba0 kernel/workqueue.c:2096
[...] worker_thread+0x214/0x18a0 kernel/workqueue.c:2230
[...] kthread+0x328/0x3e0 kernel/kthread.c:209
[...] ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:433
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org
Fixes:
49df6397edfc ("KVM: x86: Split the APIC from the rest of IRQCHIP.")
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Radim Krčmář [Wed, 23 Nov 2016 20:15:27 +0000 (21:15 +0100)]
KVM: x86: fix out-of-bounds accesses of rtc_eoi map
KVM was using arrays of size KVM_MAX_VCPUS with vcpu_id, but ID can be
bigger that the maximal number of VCPUs, resulting in out-of-bounds
access.
Found by syzkaller:
BUG: KASAN: slab-out-of-bounds in __apic_accept_irq+0xb33/0xb50 at addr [...]
Write of size 1 by task a.out/27101
CPU: 1 PID: 27101 Comm: a.out Not tainted 4.9.0-rc5+ #49
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
[...]
Call Trace:
[...] __apic_accept_irq+0xb33/0xb50 arch/x86/kvm/lapic.c:905
[...] kvm_apic_set_irq+0x10e/0x180 arch/x86/kvm/lapic.c:495
[...] kvm_irq_delivery_to_apic+0x732/0xc10 arch/x86/kvm/irq_comm.c:86
[...] ioapic_service+0x41d/0x760 arch/x86/kvm/ioapic.c:360
[...] ioapic_set_irq+0x275/0x6c0 arch/x86/kvm/ioapic.c:222
[...] kvm_ioapic_inject_all arch/x86/kvm/ioapic.c:235
[...] kvm_set_ioapic+0x223/0x310 arch/x86/kvm/ioapic.c:670
[...] kvm_vm_ioctl_set_irqchip arch/x86/kvm/x86.c:3668
[...] kvm_arch_vm_ioctl+0x1a08/0x23c0 arch/x86/kvm/x86.c:3999
[...] kvm_vm_ioctl+0x1fa/0x1a70 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3099
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org
Fixes:
af1bae5497b9 ("KVM: x86: bump KVM_MAX_VCPU_ID to 1023")
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Radim Krčmář [Wed, 23 Nov 2016 20:15:00 +0000 (21:15 +0100)]
KVM: x86: drop error recovery in em_jmp_far and em_ret_far
em_jmp_far and em_ret_far assumed that setting IP can only fail in 64
bit mode, but syzkaller proved otherwise (and SDM agrees).
Code segment was restored upon failure, but it was left uninitialized
outside of long mode, which could lead to a leak of host kernel stack.
We could have fixed that by always saving and restoring the CS, but we
take a simpler approach and just break any guest that manages to fail
as the error recovery is error-prone and modern CPUs don't need emulator
for this.
Found by syzkaller:
WARNING: CPU: 2 PID: 3668 at arch/x86/kvm/emulate.c:2217 em_ret_far+0x428/0x480
Kernel panic - not syncing: panic_on_warn set ...
CPU: 2 PID: 3668 Comm: syz-executor Not tainted 4.9.0-rc4+ #49
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
[...]
Call Trace:
[...] __dump_stack lib/dump_stack.c:15
[...] dump_stack+0xb3/0x118 lib/dump_stack.c:51
[...] panic+0x1b7/0x3a3 kernel/panic.c:179
[...] __warn+0x1c4/0x1e0 kernel/panic.c:542
[...] warn_slowpath_null+0x2c/0x40 kernel/panic.c:585
[...] em_ret_far+0x428/0x480 arch/x86/kvm/emulate.c:2217
[...] em_ret_far_imm+0x17/0x70 arch/x86/kvm/emulate.c:2227
[...] x86_emulate_insn+0x87a/0x3730 arch/x86/kvm/emulate.c:5294
[...] x86_emulate_instruction+0x520/0x1ba0 arch/x86/kvm/x86.c:5545
[...] emulate_instruction arch/x86/include/asm/kvm_host.h:1116
[...] complete_emulated_io arch/x86/kvm/x86.c:6870
[...] complete_emulated_mmio+0x4e9/0x710 arch/x86/kvm/x86.c:6934
[...] kvm_arch_vcpu_ioctl_run+0x3b7a/0x5a90 arch/x86/kvm/x86.c:6978
[...] kvm_vcpu_ioctl+0x61e/0xdd0 arch/x86/kvm/../../../virt/kvm/kvm_main.c:2557
[...] vfs_ioctl fs/ioctl.c:43
[...] do_vfs_ioctl+0x18c/0x1040 fs/ioctl.c:679
[...] SYSC_ioctl fs/ioctl.c:694
[...] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:685
[...] entry_SYSCALL_64_fastpath+0x1f/0xc2
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org
Fixes:
d1442d85cc30 ("KVM: x86: Handle errors when RIP is set during far jumps")
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Radim Krčmář [Tue, 22 Nov 2016 19:20:14 +0000 (20:20 +0100)]
KVM: x86: fix out-of-bounds access in lapic
Cluster xAPIC delivery incorrectly assumed that dest_id <= 0xff.
With enabled KVM_X2APIC_API_USE_32BIT_IDS in KVM_CAP_X2APIC_API, a
userspace can send an interrupt with dest_id that results in
out-of-bounds access.
Found by syzkaller:
BUG: KASAN: slab-out-of-bounds in kvm_irq_delivery_to_apic_fast+0x11fa/0x1210 at addr
ffff88003d9ca750
Read of size 8 by task syz-executor/22923
CPU: 0 PID: 22923 Comm: syz-executor Not tainted 4.9.0-rc4+ #49
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
[...]
Call Trace:
[...] __dump_stack lib/dump_stack.c:15
[...] dump_stack+0xb3/0x118 lib/dump_stack.c:51
[...] kasan_object_err+0x1c/0x70 mm/kasan/report.c:156
[...] print_address_description mm/kasan/report.c:194
[...] kasan_report_error mm/kasan/report.c:283
[...] kasan_report+0x231/0x500 mm/kasan/report.c:303
[...] __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:329
[...] kvm_irq_delivery_to_apic_fast+0x11fa/0x1210 arch/x86/kvm/lapic.c:824
[...] kvm_irq_delivery_to_apic+0x132/0x9a0 arch/x86/kvm/irq_comm.c:72
[...] kvm_set_msi+0x111/0x160 arch/x86/kvm/irq_comm.c:157
[...] kvm_send_userspace_msi+0x201/0x280 arch/x86/kvm/../../../virt/kvm/irqchip.c:74
[...] kvm_vm_ioctl+0xba5/0x1670 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3015
[...] vfs_ioctl fs/ioctl.c:43
[...] do_vfs_ioctl+0x18c/0x1040 fs/ioctl.c:679
[...] SYSC_ioctl fs/ioctl.c:694
[...] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:685
[...] entry_SYSCALL_64_fastpath+0x1f/0xc2
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org
Fixes:
e45115b62f9a ("KVM: x86: use physical LAPIC array for logical x2APIC")
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Nicolas Schichan [Thu, 24 Nov 2016 12:38:04 +0000 (13:38 +0100)]
init: use pr_cont() when displaying rotator during ramdisk loading.
Otherwise each individual rotator char would be printed in a new line:
(...)
[ 0.642350] -
[ 0.644374] |
[ 0.646367] -
(...)
Signed-off-by: Nicolas Schichan <nicolas.schichan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paolo Abeni [Tue, 22 Nov 2016 15:57:40 +0000 (16:57 +0100)]
ipv6: bump genid when the IFA_F_TENTATIVE flag is clear
When an ipv6 address has the tentative flag set, it can't be
used as source for egress traffic, while the associated route,
if any, can be looked up and even stored into some dst_cache.
In the latter scenario, the source ipv6 address selected and
stored in the cache is most probably wrong (e.g. with
link-local scope) and the entity using the dst_cache will
experience lack of ipv6 connectivity until said cache is
cleared or invalidated.
Overall this may cause lack of connectivity over most IPv6 tunnels
(comprising geneve and vxlan), if the first egress packet reaches
the tunnel before the DaD is completed for the used ipv6
address.
This patch bumps a new genid after that the IFA_F_TENTATIVE flag
is cleared, so that dst_cache will be invalidated on
next lookup and ipv6 connectivity restored.
Fixes:
0c1d70af924b ("net: use dst_cache for vxlan device")
Fixes:
468dfffcd762 ("geneve: add dst caching support")
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Burton [Sat, 12 Nov 2016 01:26:07 +0000 (01:26 +0000)]
MIPS: Mask out limit field when calculating wired entry count
Since MIPSr6 the Wired register is split into 2 fields, with the upper
16 bits of the register indicating a limit on the value that the wired
entry count in the bottom 16 bits of the register can take. This means
that simply reading the wired register doesn't get us a valid TLB entry
index any longer, and we instead need to retrieve only the lower 16 bits
of the register. Introduce a new num_wired_entries() function which does
this on MIPSr6 or higher and simply returns the value of the wired
register on older architecture revisions, and make use of it when
reading the number of wired entries.
Since commit
e710d6668309 ("MIPS: tlb-r4k: If there are wired entries,
don't use TLBINVF") we have been using a non-zero number of wired
entries to determine whether we should avoid use of the tlbinvf
instruction (which would invalidate wired entries) and instead loop over
TLB entries in local_flush_tlb_all(). This loop begins with the number
of wired entries, or before this patch some large bogus TLB index on
MIPSr6 systems. Thus since the aforementioned commit some MIPSr6 systems
with FTLBs have been prone to leaving stale address translations in the
FTLB & crashing in various weird & wonderful ways when we later observe
the wrong memory.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14557/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Russell King [Fri, 18 Nov 2016 19:40:10 +0000 (19:40 +0000)]
i2c: designware: fix rx fifo depth tracking
When loading the TX fifo to receive bytes on the I2C bus, we incorrectly
count the number of bytes:
rx_limit = dev->rx_fifo_depth - dw_readl(dev, DW_IC_RXFLR);
while (buf_len > 0 && tx_limit > 0 && rx_limit > 0) {
if (rx_limit - dev->rx_outstanding <= 0)
break;
rx_limit--;
dev->rx_outstanding++;
}
DW_IC_RXFLR indicates how many bytes are available to be read in the
FIFO, dev->rx_fifo_depth is the FIFO size, and dev->rx_outstanding is
the number of bytes that we've requested to be read so far, but which
have not been read.
Firstly, increasing dev->rx_outstanding and decreasing rx_limit and then
comparing them results in each byte consuming "two" bytes in this
tracking, so this is obviously wrong.
Secondly, the number of bytes that _could_ be received into the FIFO at
any time is the number of bytes we have so far requested but not yet
read from the FIFO - in other words dev->rx_outstanding.
So, in order to request enough bytes to fill the RX FIFO, we need to
request dev->rx_fifo_depth - dev->rx_outstanding bytes.
Modifying the code thusly results in us reaching the maximum number of
bytes outstanding each time we queue more "receive" operations, provided
the transfer allows that to happen.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Russell King [Fri, 18 Nov 2016 19:40:04 +0000 (19:40 +0000)]
i2c: designware: report short transfers
Rather than reporting success for a short transfer due to interrupt
latency, report an error both to the caller, as well as to the kernel
log.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Matthias Brugger [Fri, 18 Nov 2016 10:06:10 +0000 (11:06 +0100)]
drm/mediatek: fix null pointer dereference
The probe function requests the interrupt before initializing
the ddp component. Which leads to a null pointer dereference at boot.
Fix this by requesting the interrput after all components got
initialized properly.
Fixes:
119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC
MT8173.")
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Change-Id: I57193a7ab554dfb37c35a455900689333adf511c
Jitao Shi [Wed, 16 Nov 2016 03:20:54 +0000 (11:20 +0800)]
drm/mediatek: fixed the calc method of data rate per lane
Tune dsi frame rate by pixel clock, dsi add some extra signal (i.e.
Tlpx, Ths-prepare, Ths-zero, Ths-trail,Ths-exit) when enter and exit LP
mode, those signals will cause h-time larger than normal and reduce FPS.
So need to multiply a coefficient to offset the extra signal's effect.
coefficient = ((htotal*bpp/lane_number)+Tlpx+Ths_prep+Ths_zero+
Ths_trail+Ths_exit)/(htotal*bpp/lane_number)
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Bibby Hsieh [Tue, 18 Oct 2016 08:23:59 +0000 (16:23 +0800)]
drm/mediatek: fix a typo of DISP_OD_CFG to OD_RELAYMODE
If we want to set the hardware OD to relay mode,
we have to set DISP_OD_CFG register rather than
OD_RELAYMODE; otherwise, the system will access
the wrong address.
Change-Id: Ifb9bb4caa63df906437d48b5d5326b6d04ea332a
Fixes:
7216436420414144646f5d8343d061355fd23483 ("drm/mediatek: set mt8173 dithering function")
Cc: stable@vger.kernel.org # v4.9+
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Acked-by: CK Hu <ck.hu@mediatek.com>
Oliver O'Halloran [Wed, 23 Nov 2016 02:55:13 +0000 (13:55 +1100)]
powerpc/boot: Fix the early OPAL console wrappers
When configured with CONFIG_PPC_EARLY_DEBUG_OPAL=y the kernel expects
the OPAL entry and base addresses to be passed in r8 and r9
respectively. Currently the wrapper does not attempt to restore these
values before entering the decompressed kernel which causes the kernel
to branch into whatever happens to be in r9 when doing a write to the
OPAL console in early boot.
This patch adds a platform_ops hook that can be used to branch into the
new kernel. The OPAL console driver patches this at runtime so that if
the console is used it will be restored just prior to entering the
kernel.
Fixes:
656ad58ef19e ("powerpc/boot: Add OPAL console to epapr wrappers")
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tariq Toukan [Tue, 22 Nov 2016 14:20:39 +0000 (16:20 +0200)]
net/mlx4_en: Free netdev resources under state lock
Make sure mlx4_en_free_resources is called under the netdev state lock.
This is needed since RCU dereference of XDP prog should be protected.
Fixes:
326fe02d1ed6 ("net/mlx4_en: protect ring->xdp_prog with rcu_read_lock")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reported-by: Sagi Grimberg <sagi@grimberg.me>
CC: Brenden Blanco <bblanco@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Tue, 22 Nov 2016 07:24:43 +0000 (23:24 -0800)]
net: revert "net: l2tp: Treat NET_XMIT_CN as success in l2tp_eth_dev_xmit"
This reverts commit
7c6ae610a1f0, because l2tp_xmit_skb() never
returns NET_XMIT_CN, it ignores the return value of l2tp_xmit_core().
Cc: Gao Feng <gfree.wind@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
projects / platform / kernel / linux-exynos.git / log