tcp: fix SO_RCVLOWAT related hangs under mem pressure

[ Upstream commit f969dc5a885736842c3511ecdea240fbb02d25d9 ]

While commit 24adbc1676af ("tcp: fix SO_RCVLOWAT hangs with fat skbs")
fixed an issue vs too small sk_rcvbuf for given sk_rcvlowat constraint,
it missed to address issue caused by memory pressure.

1) If we are under memory pressure and socket receive queue is empty.
First incoming packet is allowed to be queued, after commit
76dfa6082032 ("tcp: allow one skb to be received per socket under memory pressure")

But we do not send EPOLLIN yet, in case tcp_data_ready() sees sk_rcvlowat
is bigger than skb length.

2) Then, when next packet comes, it is dropped, and we directly
call sk->sk_data_ready().

3) If application is using poll(), tcp_poll() will then use
tcp_stream_is_readable() and decide the socket receive queue is
not yet filled, so nothing will happen.

Even when sender retransmits packets, phases 2) & 3) repeat
and flow is effectively frozen, until memory pressure is off.

Fix is to consider tcp_under_memory_pressure() to take care
of global memory pressure or memcg pressure.

Fixes: 24adbc1676af ("tcp: fix SO_RCVLOWAT hangs with fat skbs")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Arjun Roy <arjunroy@google.com>
Suggested-by: Wei Wang <weiwan@google.com>
Reviewed-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: mptcp: fix ACKRX debug message

[ Upstream commit f384221a381751508f390b36d0e51bd5a7beb627 ]

Info from received MPCapable SYN were printed instead of the ones from
received MPCapable 3rd ACK.

Fixes: fed61c4b584c ("selftests: mptcp: make 2nd net namespace use tcp syn cookies unconditionally")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Fix bpf_fib_lookup helper MTU check for SKB ctx

[ Upstream commit 2c0a10af688c02adcf127aad29e923e0056c6b69 ]

BPF end-user on Cilium slack-channel (Carlo Carraro) wants to use
bpf_fib_lookup for doing MTU-check, but *prior* to extending packet size,
by adjusting fib_params 'tot_len' with the packet length plus the expected
encap size. (Just like the bpf_check_mtu helper supports). He discovered
that for SKB ctx the param->tot_len was not used, instead skb->len was used
(via MTU check in is_skb_forwardable() that checks against netdev MTU).

Fix this by using fib_params 'tot_len' for MTU check. If not provided (e.g.
zero) then keep existing TC behaviour intact. Notice that 'tot_len' for MTU
check is done like XDP code-path, which checks against FIB-dst MTU.

V16:
- Revert V13 optimization, 2nd lookup is against egress/resulting netdev

V13:
- Only do ifindex lookup one time, calling dev_get_by_index_rcu().

V10:
- Use same method as XDP for 'tot_len' MTU check

Fixes: 4c79579b44b1 ("bpf: Change bpf_fib_lookup to return lookup status")
Reported-by: Carlo Carraro <colrack@gmail.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/161287789444.790810.15247494756551413508.stgit@firesoul
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf, devmap: Use GFP_KERNEL for xdp bulk queue allocation

[ Upstream commit 7d4553b69fb335496c597c31590e982485ebe071 ]

The devmap bulk queue is allocated with GFP_ATOMIC and the allocation
may fail if there is no available space in existing percpu pool.

Since commit 75ccae62cb8d42 ("xdp: Move devmap bulk queue into struct net_device")
moved the bulk queue allocation to NETDEV_REGISTER callback, whose context
is allowed to sleep, use GFP_KERNEL instead of GFP_ATOMIC to let percpu
allocator extend the pool when needed and avoid possible failure of netdev
registration.

As the required alignment is natural, we can simply use alloc_percpu().

Fixes: 75ccae62cb8d42 ("xdp: Move devmap bulk queue into struct net_device")
Signed-off-by: Jun'ichi Nomura <junichi.nomura@nec.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210209082451.GA44021@jeru.linux.bs1.fc.nec.co.jp
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Fix an unitialized value in bpf_iter

[ Upstream commit 17d8beda277a36203585943e70c7909b60775fd5 ]

Commit 15d83c4d7cef ("bpf: Allow loading of a bpf_iter program")
cached btf_id in struct bpf_iter_target_info so later on
if it can be checked cheaply compared to checking registered names.

syzbot found a bug that uninitialized value may occur to
bpf_iter_target_info->btf_id. This is because we allocated
bpf_iter_target_info structure with kmalloc and never initialized
field btf_id afterwards. This uninitialized btf_id is typically
compared to a u32 bpf program func proto btf_id, and the chance
of being equal is extremely slim.

This patch fixed the issue by using kzalloc which will also
prevent future likely instances due to adding new fields.

Fixes: 15d83c4d7cef ("bpf: Allow loading of a bpf_iter program")
Reported-by: syzbot+580f4f2a272e452d55cb@syzkaller.appspotmail.com
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210212005926.2875002-1-yhs@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

libbpf: Ignore non function pointer member in struct_ops

[ Upstream commit d2836dddc95d5dd82c7cb23726c97d8c9147f050 ]

When libbpf initializes the kernel's struct_ops in
"bpf_map__init_kern_struct_ops()", it enforces all
pointer types must be a function pointer and rejects
others.  It turns out to be too strict.  For example,
when directly using "struct tcp_congestion_ops" from vmlinux.h,
it has a "struct module *owner" member and it is set to NULL
in a bpf_tcp_cc.o.

Instead, it only needs to ensure the member is a function
pointer if it has been set (relocated) to a bpf-prog.
This patch moves the "btf_is_func_proto(kern_mtype)" check
after the existing "if (!prog) { continue; }".  The original debug
message in "if (!prog) { continue; }" is also removed since it is
no longer valid.  Beside, there is a later debug message to tell
which function pointer is set.

The "btf_is_func_proto(mtype)" has already been guaranteed
in "bpf_object__collect_st_ops_relos()" which has been run
before "bpf_map__init_kern_struct_ops()".  Thus, this check
is removed.

v2:
- Remove outdated debug message (Andrii)
  Remove because there is a later debug message to tell
  which function pointer is set.
- Following mtype->type is no longer needed. Remove:
  "skip_mods_and_typedefs(btf, mtype->type, &mtype_id)"
- Do "if (!prog)" test before skip_mods_and_typedefs.

Fixes: 590a00888250 ("bpf: libbpf: Add STRUCT_OPS support")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210212021030.266932-1-kafai@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: fix potential overflow when multiplying to u32 integers

[ Upstream commit 6194f7e6473be78acdc5d03edd116944bdbb2c4e ]

The multiplication of the u32 variables tx_time and estimated_retx is
performed using a 32 bit multiplication and the result is stored in
a u64 result. This has a potential u32 overflow issue, so avoid this
by casting tx_time to a u64 to force a 64 bit multiply.

Addresses-Coverity: ("Unintentional integer overflow")
Fixes: 050ac52cbe1f ("mac80211: code for on-demand Hybrid Wireless Mesh Protocol")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210205175352.208841-1-colin.king@canonical.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Check tunnel offload is required before setting SWP

[ Upstream commit e1c3940c6003d820c787473c65711b49c2d1bc42 ]

Check that tunnel offload is required before setting Software Parser
offsets to get Geneve HW offload. In case of Geneve packet we check HW
offload support of SWP in mlx5e_tunnel_features_check() and set features
accordingly, this should be reflected in skb offload requested by the
kernel and we should add the Software Parser offsets only if requested.
Otherwise, in case HW doesn't support SWP for Geneve, data path will
mistakenly try to offload Geneve SKBs with skb->encapsulation set,
regardless of whether offload was requested or not on this specific SKB.

Fixes: e3cfc7e6b7bd ("net/mlx5e: TX, Add geneve tunnel stateless offload support")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: CT: manage the lifetime of the ct entry object

[ Upstream commit a2173131526dc845eb1968a15bc192b3fc2ff000 ]

The ct entry object is accessed by the ct add, del, stats and restore
methods. In addition, it is referenced from several hash tables.

The lifetime of the ct entry object was not managed which triggered race
conditions as in the following kasan dump:
[ 3374.973945] ==================================================================
[ 3374.988552] BUG: KASAN: use-after-free in memcmp+0x4c/0x98
[ 3374.999590] Read of size 1 at addr ffff00036129ea55 by task ksoftirqd/1/15
[ 3375.016415] CPU: 1 PID: 15 Comm: ksoftirqd/1 Tainted: G           O      5.4.31+ #1
[ 3375.055301] Call trace:
[ 3375.060214]  dump_backtrace+0x0/0x238
[ 3375.067580]  show_stack+0x24/0x30
[ 3375.074244]  dump_stack+0xe0/0x118
[ 3375.081085]  print_address_description.isra.9+0x74/0x3d0
[ 3375.091771]  __kasan_report+0x198/0x1e8
[ 3375.099486]  kasan_report+0xc/0x18
[ 3375.106324]  __asan_load1+0x60/0x68
[ 3375.113338]  memcmp+0x4c/0x98
[ 3375.119409]  mlx5e_tc_ct_restore_flow+0x3a4/0x6f8 [mlx5_core]
[ 3375.131073]  mlx5e_rep_tc_update_skb+0x1d4/0x2f0 [mlx5_core]
[ 3375.142553]  mlx5e_handle_rx_cqe_rep+0x198/0x308 [mlx5_core]
[ 3375.154034]  mlx5e_poll_rx_cq+0x2a0/0x1060 [mlx5_core]
[ 3375.164459]  mlx5e_napi_poll+0x1d4/0xa78 [mlx5_core]
[ 3375.174453]  net_rx_action+0x28c/0x7a8
[ 3375.182004]  __do_softirq+0x1b4/0x5d0

Manage the lifetime of the ct entry object by using synchornization
mechanisms for concurrent access.

Fixes: ac991b48d43c ("net/mlx5e: CT: Offload established flows")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Disable devlink reload for lag devices

[ Upstream commit edac23c2b3d3ac64cfcd351087295893671adbf5 ]

Devlink reload can't be allowed on lag devices since reloading one lag
device will cause traffic on the bond to get stucked.
Users who wish to reload a lag device, need to remove the device from
the bond, and only then reload it.

Fixes: 4383cfcc65e7 ("net/mlx5: Add devlink reload")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Disallow RoCE on lag device

[ Upstream commit 7ab91f2b03367f9d25dd807ebdfb0d67295e0e41 ]

In lag mode, setting roce enabled/disable of lag device have no effect.
e.g.: bond device (roce/vf_lag) roce status remain unchanged.
Therefore disable it and add an error message.

Fixes: cc9defcbb8fa ("net/mlx5: Handle "enable_roce" devlink param")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Disallow RoCE on multi port slave device

[ Upstream commit c70f8597fcc1399ef6d5b5ce648a31d887d5dba2 ]

In dual port mode, setting roce enabled/disable for the slave device
have no effect. e.g.: the slave device roce status remain unchanged.
Therefore disable it and add an error message.
Enable or disable roce of the master device affect both master and slave
devices.

Fixes: cc9defcbb8fa ("net/mlx5: Handle "enable_roce" devlink param")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Disable devlink reload for multi port slave device

[ Upstream commit d89ddaae1766f8fe571ea6eb63ec098ff556f1dd ]

Devlink reload can't be allowed on a multi port slave device, because
reload of slave device doesn't take effect.

The right flow is to disable devlink reload for multi port slave
device. Hence, disabling it in mlx5_core probing.

Fixes: 4383cfcc65e7 ("net/mlx5: Add devlink reload")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: kTLS, Use refcounts to free kTLS RX priv context

[ Upstream commit b850bbff965129c34f50962638c0a66c82563536 ]

wait_for_resync is unreliable - if it timeouts, priv_rx will be freed
anyway. However, mlx5e_ktls_handle_get_psv_completion will be called
sooner or later, leading to use-after-free. For example, it can happen
if a CQ error happened, and ICOSQ stopped, but later on the queues are
destroyed, and ICOSQ is flushed with mlx5e_free_icosq_descs.

This patch converts the lifecycle of priv_rx to fully refcount-based, so
that the struct won't be freed before the refcount goes to zero.

Fixes: 0419d8c9d8f8 ("net/mlx5e: kTLS, Add kTLS RX resync support")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Replace synchronize_rcu with synchronize_net

[ Upstream commit 4d6e6b0c6d4bed8a7128500701354e2dc6098fa3 ]

The commit cited below switched from using napi_synchronize to
synchronize_rcu to have a guarantee that it will finish in finite time.
However, on average, synchronize_rcu takes more time than
napi_synchronize. Given that it's called multiple times per channel on
deactivation, it accumulates to a significant amount, which causes
timeouts in some applications (for example, when using bonding with
NetworkManager).

This commit replaces synchronize_rcu with synchronize_net, which is
faster when called under rtnl_lock, allowing to speed up the described
flow.

Fixes: 9c25a22dfb00 ("net/mlx5e: Use synchronize_rcu to sync with NAPI")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Fix health error state handling

[ Upstream commit 51d138c2610a236c1ed0059d034ee4c74f452b86 ]

Currently, when we discover a fatal error, we are queueing a work that
will wait for a lock in order to enter the device to error state.
Meanwhile, FW commands are still being processed, and gets timeouts.
This can block the driver for few minutes before the work will manage
to get the lock and enter to error state.

Setting the device to error state before queueing health work, in order
to avoid FW commands being processed while the work is waiting for the
lock.

Fixes: c1d4d2e92ad6 ("net/mlx5: Avoid calling sleeping function by the health poll thread")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Change interrupt moderation channel params also when channels are closed

[ Upstream commit 65ba8594a238c20e458b3d2d39d91067cbffd0b1 ]

struct mlx5e_params contains fields ({rx,tx}_cq_moderation) that depend
on two things: whether DIM is enabled and the state of a private flag
(MLX5E_PFLAG_{RX,TX}_CQE_BASED_MODER). Whenever the DIM state changes,
mlx5e_reset_{rx,tx}_moderation is called to update the fields, however,
only if the channels are open. The flow where the channels are closed
misses the required update of the fields. This commit moves the calls of
mlx5e_reset_{rx,tx}_moderation, so that they run in both flows.

Fixes: ebeaf084ad5c ("net/mlx5e: Properly set default values when disabling adaptive moderation")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Don't change interrupt moderation params when DIM is enabled

[ Upstream commit 019f93bc4ba3a0dcb77f448ee77fc4c9c1b89565 ]

When mlx5e_ethtool_set_coalesce doesn't change DIM state
(enabled/disabled), it calls mlx5e_set_priv_channels_coalesce
unconditionally, which in turn invokes a firmware command to set
interrupt moderation parameters. It shouldn't happen while DIM manages
those parameters dynamically (it might even be happening at the same
time).

This patch fixes it by splitting mlx5e_set_priv_channels_coalesce into
two functions (for RX and TX) and calling them only when DIM is disabled
(for RX and TX respectively).

Fixes: cb3c7fd4f839 ("net/mlx5e: Support adaptive RX coalescing")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phy: consider that suspend2ram may cut off PHY power

[ Upstream commit 4c0d2e96ba055bd8911bb8287def4f8ebbad15b6 ]

Claudiu reported that on his system S2R cuts off power to the PHY and
after resuming certain PHY settings are lost. The PM folks confirmed
that cutting off power to selected components in S2R is a valid case.
Therefore resuming from S2R, same as from hibernation, has to assume
that the PHY has power-on defaults. As a consequence use the restore
callback also as resume callback.
In addition make sure that the interrupt configuration is restored.
Let's do this in phy_init_hw() and ensure that after this call
actual interrupt configuration is in sync with phydev->interrupts.
Currently, if interrupt was enabled before hibernation, we would
resume with interrupt disabled because that's the power-on default.

This fix applies cleanly only after the commit marked as fixed.

I don't have an affected system, therefore change is compile-tested
only.

[0] https://lore.kernel.org/netdev/1610120754-14331-1-git-send-email-claudiu.beznea@microchip.com/

Fixes: 611d779af7ca ("net: phy: fix MDIO bus PM PHY resuming")
Reported-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dpaa2-eth: fix memory leak in XDP_REDIRECT

[ Upstream commit e12be9139cca26d689fe1a9257054b76752f725b ]

If xdp_do_redirect() fails, the calling driver should handle recycling
or freeing of the page associated with the frame. The dpaa2-eth driver
didn't do either of them and just incremented a counter.
Fix this by trying to DMA map back the page and recycle it or, if the
mapping fails, just free it.

Fixes: d678be1dc1ec ("dpaa2-eth: add XDP_REDIRECT support")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xen/netback: fix spurious event detection for common event case

[ Upstream commit a3daf3d39132b405781be8d9ede0c449b244b64e ]

In case of a common event for rx and tx queue the event should be
regarded to be spurious if no rx and no tx requests are pending.

Unfortunately the condition for testing that is wrong causing to
decide a event being spurious if no rx OR no tx requests are
pending.

Fix that plus using local variables for rx/tx pending indicators in
order to split function calls and if condition.

Fixes: 23025393dbeb3b ("xen/netback: use lateeoi irq binding")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Wei Liu <wl@xen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Fix devlink info's stored fw.psid version format.

[ Upstream commit db28b6c77f4050f62599267a886b61fbd6504633 ]

The running fw.psid version is in decimal format but the stored
fw.psid is in hex format.  This can mislead the user to reset the
NIC to activate the stored version to become the running version.

Fix it to display the stored fw.psid in decimal format.

Fixes: 1388875b3916 ("bnxt_en: Add stored FW version info to devlink info_get cb.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: reverse order of TX disable and carrier off

[ Upstream commit 132e0b65dc2b8bfa9721bfce834191f24fd1d7ed ]

A TX queue can potentially immediately timeout after it is stopped
and the last TX timestamp on that queue was more than 5 seconds ago with
carrier still up.  Prevent these intermittent false TX timeouts
by bringing down carrier first before calling netif_tx_disable().

Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.")
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ibmvnic: Set to CLOSED state even on error

[ Upstream commit d4083d3c00f60a09ad82e3bf17ff57fec69c8aa6 ]

If set_link_state() fails for any reason, we still cleanup the adapter
state and cannot recover from a partial close anyway. So set the adapter
to CLOSED state. That way if a new soft/hard reset is processed, the
adapter will remain in the CLOSED state until the next ibmvnic_open().

Fixes: 01d9bd792d16 ("ibmvnic: Reorganize device close")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Reported-by: Abdul Haleem <abdhalee@in.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: Convert test_xdp_redirect.sh to bash

[ Upstream commit 732fa32330667a80ce4985ca81b6e9d6b2ad2072 ]

The test_xdp_redirect.sh script uses a bash feature, '&>'. On systems,
e.g. Debian, where '/bin/sh' is dash, this will not work as
expected. Use bash in the shebang to get the expected behavior.

Further, using 'set -e' means that the error of a command cannot be
captured without the command being executed with '&&' or '||'. Let us
restructure the ping-commands, and use them as an if-expression, so
that we can capture the return value.

v4: Added missing Fixes:, and removed local variables. (Andrii)
v3: Reintroduced /bin/bash, and kept 'set -e'. (Andrii)
v2: Kept /bin/sh and removed bashisms. (Randy)

Fixes: 996139e801fd ("selftests: bpf: add a test for XDP redirect")
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210211082029.1687666-1-bjorn.topel@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath9k: fix data bus crash when setting nf_override via debugfs

[ Upstream commit 12c8f3d1cdd84f01ee777b756db9dddc1f1c9d17 ]

When trying to set the noise floor via debugfs, a "data bus error"
crash like the following can happen:

[   88.433133] Data bus error, epc == 80221c28, ra == 83314e60
[   88.438895] Oops[#1]:
[   88.441246] CPU: 0 PID: 7263 Comm: sh Not tainted 4.14.195 #0
[   88.447174] task: 838a1c20 task.stack: 82d5e000
[   88.451847] $ 0   : 00000000 00000030 deadc0de 83141de4
[   88.457248] $ 4   : b810a2c4 0000a2c4 83230fd4 00000000
[   88.462652] $ 8   : 0000000a 00000000 00000001 00000000
[   88.468055] $12   : 7f8ef318 00000000 00000000 77f802a0
[   88.473457] $16   : 83230080 00000002 0000001b 83230080
[   88.478861] $20   : 83a1c3f8 00841000 77f7adb0 ffffff92
[   88.484263] $24   : 00000fa4 77edd860
[   88.489665] $28   : 82d5e000 82d5fda8 00000000 83314e60
[   88.495070] Hi    : 00000000
[   88.498044] Lo    : 00000000
[   88.501040] epc   : 80221c28 ioread32+0x8/0x10
[   88.505671] ra    : 83314e60 ath9k_hw_loadnf+0x88/0x520 [ath9k_hw]
[   88.512049] Status: 1000fc03 KERNEL EXL IE
[   88.516369] Cause : 5080801c (ExcCode 07)
[   88.520508] PrId  : 00019374 (MIPS 24Kc)
[   88.524556] Modules linked in: ath9k ath9k_common pppoe ppp_async l2tp_ppp cdc_mbim batman_adv ath9k_hw ath sr9700 smsc95xx sierra_net rndis_host qmi_wwan pppox ppp_generic pl2303 nf_conntrack_ipv6 mcs7830 mac80211 kalmia iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm ftdi_sio dm9601 cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem ax88179_178a asix xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_ecn xt_dscp xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_NETMAP xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CLASSIFY usbserial usbnet usbhid slhc rtl8150 r8152 pegasus nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack
[   88.597894]  libcrc32c kaweth iptable_mangle iptable_filter ipt_ECN ipheth ip_tables hso hid_generic crc_ccitt compat cdc_wdm cdc_acm br_netfilter hid evdev input_core nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 l2tp_netlink l2tp_core udp_tunnel ip6_udp_tunnel xfrm6_mode_tunnel xfrm6_mode_transport xfrm6_mode_beet ipcomp6 xfrm6_tunnel esp6 ah6 xfrm4_tunnel xfrm4_mode_tunnel xfrm4_mode_transport xfrm4_mode_beet ipcomp esp4 ah4 tunnel6 tunnel4 tun xfrm_user xfrm_ipcomp af_key xfrm_algo sha256_generic sha1_generic jitterentropy_rng drbg md5 hmac echainiv des_generic deflate zlib_inflate zlib_deflate cbc authenc crypto_acompress ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common crc16 mii aead crypto_null cryptomgr crc32c_generic
[   88.671671]  crypto_hash
[   88.674292] Process sh (pid: 7263, threadinfo=82d5e000, task=838a1c20, tls=77f81efc)
[   88.682279] Stack : 00008060 00000008 00000200 00000000 00000000 00000000 00000000 00000002
[   88.690916]         80500000 83230080 82d5fe22 00841000 77f7adb0 00000000 00000000 83156858
[   88.699553]         00000000 8352fa00 83ad62b0 835302a8 00000000 300a00f8 00000003 82d5fe38
[   88.708190]         82d5fef4 00000001 77f54dc4 77f80000 77f7adb0 c79fe901 00000000 00000000
[   88.716828]         80510000 00000002 00841000 77f54dc4 77f80000 801ce4cc 0000000b 41824292
[   88.725465]         ...
[   88.727994] Call Trace:
[   88.730532] [<80221c28>] ioread32+0x8/0x10
[   88.734765] Code: 00000000  8c820000  0000000f <03e00008> 00000000  08088708  00000000  aca40000  03e00008
[   88.744846]
[   88.746464] ---[ end trace db226b2de1b69b9e ]---
[   88.753477] Kernel panic - not syncing: Fatal exception
[   88.759981] Rebooting in 3 seconds..

The "REG_READ(ah, AR_PHY_AGC_CONTROL)" in ath9k_hw_loadnf() does not
like being called when the hardware is asleep, leading to this crash.

The easiest way to reproduce this is trying to set nf_override while
the hardware is down:

  $ ip link set down dev wlan0
  $ echo "-85" > /sys/kernel/debug/ieee80211/phy0/ath9k/nf_override

Fixing this crash by waking the hardware up before trying to set the
noise floor. Similar to what other ath9k debugfs files do.

Tested on a Lima board from 8devices, which has a QCA 4531 chipset.

Fixes: b90189759a7f ("ath9k: add noise floor override option")
Cc: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Linus Lüssing <ll@simonwunderlich.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210209184352.4272-1-linus.luessing@c0d3.blue
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: pnvm: increment the pointer before checking the TLV

[ Upstream commit ff11a8ee2d2d0f78514ac9b42fb50c525ca695c7 ]

If the SKU_ID doesn't match, we don't increment the pointer and keep
checking the same TLV over and over again.

We need to increment the pointer in all situtations, namely if the TLV
is not a SKU_ID, if the SKU_ID matched or if the SKU_ID didn't match.
So we can increment the pointer already before checking for these
conditions to solve the problem.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Fixes: 6972592850c0 ("iwlwifi: read and parse PNVM file")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210172142.de94d366f3ff.I9a5a54906cf0f4ec8af981d6066bfd771152ffb9@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: pnvm: set the PNVM again if it was already loaded

[ Upstream commit 4a81598f0f39cffbf1c29c4a184063d513661c4a ]

When the interface goes up, we have already loaded the PNVM during
init, so we don't load it anymore.  But we still need to set the PNVM
values in the context so that the FW can load it again.

Call set_pnvm when the PNVM is already loaded and change the
trans_pcie implementation to accept a second call to set_pnvm when we
have already allocated and, in this case, only set the values without
allocating again.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Fixes: 6972592850c0 ("iwlwifi: read and parse PNVM file")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210172142.622546a3566f.I659a8b9aa944d213c4ba446e142d74f3f6db9c64@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf_lru_list: Read double-checked variable once without lock

[ Upstream commit 6df8fb83301d68ea0a0c0e1cbcc790fcc333ed12 ]

For double-checked locking in bpf_common_lru_push_free(), node->type is
read outside the critical section and then re-checked under the lock.
However, concurrent writes to node->type result in data races.

For example, the following concurrent access was observed by KCSAN:

  write to 0xffff88801521bc22 of 1 bytes by task 10038 on cpu 1:
   __bpf_lru_node_move_in        kernel/bpf/bpf_lru_list.c:91
   __local_list_flush            kernel/bpf/bpf_lru_list.c:298
   ...
  read to 0xffff88801521bc22 of 1 bytes by task 10043 on cpu 0:
   bpf_common_lru_push_free      kernel/bpf/bpf_lru_list.c:507
   bpf_lru_push_free             kernel/bpf/bpf_lru_list.c:555
   ...

Fix the data races where node->type is read outside the critical section
(for double-checked locking) by marking the access with READ_ONCE() as
well as ensuring the variable is only accessed once.

Fixes: 3a08c2fd7634 ("bpf: LRU List")
Reported-by: syzbot+3536db46dfa58c573458@syzkaller.appspotmail.com
Reported-by: syzbot+516acdb03d3e27d91bcd@syzkaller.appspotmail.com
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210209112701.3341724-1-elver@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: mvm: don't check if CSA event is running before removing

[ Upstream commit b8a86164454aa745ecb534d7477d50d440ea05b6 ]

We may want to remove it before it started (i.e. before the
actual switch time).

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Fixes: 58ddd9b6d194 ("iwlwifi: mvm: don't send a CSA command the firmware doesn't know")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210171218.835db8987b8a.Ic6c5d28d744302db1bc6c4314bd3138ba472f834@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: mvm: assign SAR table revision to the command later

[ Upstream commit 28db1862067cb09ebfdccfbc129a52c6fdb4c4d7 ]

The call to iwl_sar_geo_init() was moved to the end of the
iwl_mvm_sar_geo_init() function, after the table revision is assigned
to the FW command.  But the revision is only known after
iwl_sar_geo_init() is called, so we were always assigning zero to it.

Fix that by moving the assignment code after the iwl_sar_geo_init()
function is called.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Fixes: 45acebf8d6a6 ("iwlwifi: fix sar geo table initialization")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210135352.cef55ef3a065.If96c60f08d24c2262c287168a6f0dbd7cf0f8f5c@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: mvm: send stored PPAG command instead of local

[ Upstream commit 659844d391826bfc5c8b4d9a06869ed51d859c76 ]

Some change conflicts apparently cause a confusion between a local
variable being used to send the PPAG command and the introduction of a
union for this command.  Most parts of the local command were never
copied from the stored data, so the FW was getting garbage in the
tables instead of getting valid values.

Fix this by completely removing the local and using only the union
that we have stored in fwrt.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Fixes: f2134f66f40e ("iwlwifi: acpi: support ppag table command v2")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210135352.d090e0301023.I7d57f4d7da9a3297734c51cf988199323c76916d@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: mvm: store PPAG enabled/disabled flag properly

[ Upstream commit 551d793f65364c904921ac168d4b4028bb51be69 ]

When reading the PPAG table from ACPI, we should store everything in
our fwrt structure, so it can be accessed later.  But we had a local
ppag_table variable in the function and were erroneously storing the
enabled/disabled flag in it instead of storing it in the fwrt.  Fix
this by removing the local variable and storing everything directly in
fwrt.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Fixes: f2134f66f40e ("iwlwifi: acpi: support ppag table command v2")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210135352.889862e6d393.I8b894c1b2b3fe0ad2fb39bf438273ea47eb5afa4@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: mvm: fix the type we use in the PPAG table validity checks

[ Upstream commit 5a6842455c113920001df83cffa28accceeb0927 ]

The value we receive from ACPI is a long long unsigned integer but the
values should be treated as signed char.  When comparing the received
value with ACPI_PPAG_MIN_LB/HB, we were doing an unsigned comparison,
so the negative value would actually be treated as a very high number.

To solve this issue, assign the value to our table of s8's before
making the comparison, so the value is already converted when we do
so.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210135352.b0ec69f312bc.If77fd9c61a96aa7ef2ac96d935b7efd7df502399@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: aspeed: snoop: Add clock control logic

[ Upstream commit 3f94cf15583be554df7aaa651b8ff8e1b68fbe51 ]

If LPC SNOOP driver is registered ahead of lpc-ctrl module, LPC
SNOOP block will be enabled without heart beating of LCLK until
lpc-ctrl enables the LCLK. This issue causes improper handling on
host interrupts when the host sends interrupt in that time frame.
Then kernel eventually forcibly disables the interrupt with
dumping stack and printing a 'nobody cared this irq' message out.

To prevent this issue, all LPC sub-nodes should enable LCLK
individually so this patch adds clock control logic into the LPC
SNOOP driver.

Fixes: 3772e5da4454 ("drivers/misc: Aspeed LPC snoop output using misc chardev")
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@intel.com>
Signed-off-by: Vernon Mauery <vernon.mauery@linux.intel.com>
Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20201208091748.1920-1-wangzhiqiang.bj@bytedance.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath11k: fix a locking bug in ath11k_mac_op_start()

[ Upstream commit c202e2ebe1dc454ad54fd0018c023ec553d47284 ]

This error path leads to a Smatch warning:

drivers/net/wireless/ath/ath11k/mac.c:4269 ath11k_mac_op_start()
error: double unlocked '&ar->conf_mutex' (orig line 4251)

We're not holding the lock when we do the "goto err;" so it leads to a
double unlock.  The fix is to hold the lock for a little longer.

Fixes: c83c500b55b6 ("ath11k: enable idle power save mode")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
[kvalo@codeaurora.org: move also rcu_assign_pointer() call]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/YBk4GoeE+yc0wlJH@mwanda
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath10k: Fix lockdep assertion warning in ath10k_sta_statistics

[ Upstream commit 7df28718928d08034b36168200d67b558ce36f3d ]

ath10k_debug_fw_stats_request just be called with conf_mutex held,
otherwise the following warning is seen when lock debugging is enabled:

WARNING: CPU: 0 PID: 793 at drivers/net/wireless/ath/ath10k/debug.c:357 ath10k_debug_fw_stats_request+0x12c/0x133 [ath10k_core]
Modules linked in: snd_hda_codec_hdmi designware_i2s snd_hda_intel snd_intel_dspcfg snd_hda_codec i2c_piix4 snd_hwdep snd_hda_core acpi_als kfifo_buf industrialio snd_soc_max98357a snd_soc_adau7002 snd_soc_acp_da7219mx98357_mach snd_soc_da7219 acp_audio_dma ccm xt_MASQUERADE fuse ath10k_pci ath10k_core lzo_rle ath lzo_compress mac80211 zram cfg80211 r8152 mii joydev
CPU: 0 PID: 793 Comm: wpa_supplicant Tainted: G        W         5.10.9 #5
Hardware name: HP Grunt/Grunt, BIOS Google_Grunt.11031.104.0 09/05/2019
RIP: 0010:ath10k_debug_fw_stats_request+0x12c/0x133 [ath10k_core]
Code: 1e bb a1 ff ff ff 4c 89 ef 48 c7 c6 d3 31 2e c0 89 da 31 c0 e8 bd f8 ff ff 89 d8 eb 02 31 c0 5b 41 5c 41 5d 41 5e 41 5f 5d c3 <0f> 0b e9 04 ff ff ff 0f 1f 44 00 00 55 48 89 e5 41 56 53 48 89 fb
RSP: 0018:ffffb2478099f7d0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff9e432700cce0 RCX: 11c85cfd6b8e3b00
RDX: ffff9e432700cce0 RSI: ffff9e43127c5668 RDI: ffff9e4318deddf0
RBP: ffffb2478099f7f8 R08: 0000000000000002 R09: 00000003fd7068cc
R10: ffffffffc01b2749 R11: ffffffffc029efaf R12: ffff9e432700c000
R13: ffff9e43127c33e0 R14: ffffb2478099f918 R15: ffff9e43127c33e0
FS:  00007f7ea48e2740(0000) GS:ffff9e432aa00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000059aa799ddf38 CR3: 0000000118de2000 CR4: 00000000001506f0
Call Trace:
 ath10k_sta_statistics+0x4d/0x270 [ath10k_core]
 sta_set_sinfo+0x1be/0xaec [mac80211]
 ieee80211_get_station+0x58/0x76 [mac80211]
 rdev_get_station+0xf1/0x11e [cfg80211]
 nl80211_get_station+0x7f/0x146 [cfg80211]
 genl_rcv_msg+0x32e/0x35e
 ? nl80211_stop_ap+0x19/0x19 [cfg80211]
 ? nl80211_get_station+0x146/0x146 [cfg80211]
 ? genl_rcv+0x19/0x36
 ? genl_rcv+0x36/0x36
 netlink_rcv_skb+0x89/0xfb
 genl_rcv+0x28/0x36
 netlink_unicast+0x169/0x23b
 netlink_sendmsg+0x38a/0x402
 sock_sendmsg+0x72/0x76
 ____sys_sendmsg+0x153/0x1cc
 ? copy_msghdr_from_user+0x5d/0x85
 ___sys_sendmsg+0x7c/0xb5
 ? lock_acquire+0x181/0x23d
 ? syscall_trace_enter+0x15e/0x160
 ? find_held_lock+0x3d/0xb2
 ? syscall_trace_enter+0x15e/0x160
 ? sched_clock_cpu+0x15/0xc6
 __sys_sendmsg+0x62/0x9a
 do_syscall_64+0x43/0x55
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 4913e675630e ("ath10k: enable rx duration report default for wmi tlv")
Signed-off-by: Anand K Mistry <amistry@google.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210202144033.1.I9e556f9fb1110d58c31d04a8a1293995fb8bb678@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath10k: Fix suspicious RCU usage warning in ath10k_wmi_tlv_parse_peer_stats_info()

[ Upstream commit 2615e3cdbd9c0e864f5906279c952a309871d225 ]

The ieee80211_find_sta_by_ifaddr call in
ath10k_wmi_tlv_parse_peer_stats_info must be called while holding the
RCU read lock. Otherwise, the following warning will be seen when RCU
usage checking is enabled:

=============================
WARNING: suspicious RCU usage
5.10.3 #8 Tainted: G        W
-----------------------------
include/linux/rhashtable.h:594 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
no locks held by ksoftirqd/1/16.

stack backtrace:
CPU: 1 PID: 16 Comm: ksoftirqd/1 Tainted: G        W         5.10.3 #8
Hardware name: HP Grunt/Grunt, BIOS Google_Grunt.11031.104.0 09/05/2019
Call Trace:
 dump_stack+0xab/0x115
 sta_info_hash_lookup+0x71/0x1e9 [mac80211]
 ? lock_is_held_type+0xe6/0x12f
 ? __kasan_kmalloc+0xfb/0x112
 ieee80211_find_sta_by_ifaddr+0x12/0x61 [mac80211]
 ath10k_wmi_tlv_parse_peer_stats_info+0xbd/0x10b [ath10k_core]
 ath10k_wmi_tlv_iter+0x8b/0x1a1 [ath10k_core]
 ? ath10k_wmi_tlv_iter+0x1a1/0x1a1 [ath10k_core]
 ath10k_wmi_tlv_event_peer_stats_info+0x103/0x13b [ath10k_core]
 ath10k_wmi_tlv_op_rx+0x722/0x80d [ath10k_core]
 ath10k_htc_rx_completion_handler+0x16e/0x1d7 [ath10k_core]
 ath10k_pci_process_rx_cb+0x116/0x22c [ath10k_pci]
 ? ath10k_htc_process_trailer+0x332/0x332 [ath10k_core]
 ? _raw_spin_unlock_irqrestore+0x34/0x61
 ? lockdep_hardirqs_on+0x8e/0x12e
 ath10k_ce_per_engine_service+0x55/0x74 [ath10k_core]
 ath10k_ce_per_engine_service_any+0x76/0x84 [ath10k_core]
 ath10k_pci_napi_poll+0x49/0x141 [ath10k_pci]
 net_rx_action+0x11a/0x347
 __do_softirq+0x2d3/0x539
 run_ksoftirqd+0x4b/0x86
 smpboot_thread_fn+0x1d0/0x2ab
 ? cpu_report_death+0x7f/0x7f
 kthread+0x189/0x191
 ? cpu_report_death+0x7f/0x7f
 ? kthread_blkcg+0x31/0x31
 ret_from_fork+0x22/0x30

Fixes: 0f7cb26830a6e ("ath10k: add rx bitrate report for SDIO")
Signed-off-by: Anand K Mistry <amistry@google.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210202134451.1.I0d2e83c42755671b7143504b62787fd06cd914ed@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: at91: use proper asm syntax in pm_suspend

[ Upstream commit d30337da8677cd73cb19444436b311c13e57356f ]

Compiling with the clang integrated assembler warns about
a recently added instruction:

<instantiation>:14:13: error: unknown token in expression
 ldr tmp1, =#0x00020010UL
arch/arm/mach-at91/pm_suspend.S:542:2: note: while in macro instantiation
 at91_plla_enable

Remove the extra '#' character that is not used for the 'ldr'
instruction when doing an indirect load of a constant.

Fixes: 4fd36e458392 ("ARM: at91: pm: add plla disable/enable support for sam9x60")
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210204160129.2249394-1-arnd@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: wfx: fix possible panic with re-queued frames

[ Upstream commit 26df933d9b83ea668304dc4ec641d52ea1fc4091 ]

When the firmware rejects a frame (because station become asleep or
disconnected), the frame is re-queued in mac80211. However, the
re-queued frame was 8 bytes longer than the original one (the size of
the ICV for the encryption). So, when mac80211 try to send this frame
again, it is a little bigger than expected.
If the frame is re-queued secveral time it end with a skb_over_panic
because the skb buffer is not large enough.

Note it only happens when device acts as an AP and encryption is
enabled.

This patch more or less reverts the commit 049fde130419 ("staging: wfx:
drop useless field from struct wfx_tx_priv").

Fixes: 049fde130419 ("staging: wfx: drop useless field from struct wfx_tx_priv")
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20210208135254.399964-1-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

optee: simplify i2c access

[ Upstream commit 67bc809752796acb2641ca343cad5b45eef31d7c ]

Storing a bogus i2c_client structure on the stack adds overhead and
causes a compile-time warning:

drivers/tee/optee/rpc.c:493:6: error: stack frame size of 1056 bytes in function 'optee_handle_rpc' [-Werror,-Wframe-larger-than=]
void optee_handle_rpc(struct tee_context *ctx, struct optee_rpc_param *param,

Change the implementation of handle_rpc_func_cmd_i2c_transfer() to
open-code the i2c_transfer() call, which makes it easier to read
and avoids the warning.

Fixes: c05210ab9757 ("drivers: optee: allow op-tee to access devices on the i2c bus")
Tested-by: Jorge Ramirez-Ortiz <jorge@foundries.io>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: s3c: fix fiq for clang IAS

[ Upstream commit 7f9942c61fa60eda7cc8e42f04bd25b7d175876e ]

Building with the clang integrated assembler produces a couple of
errors for the s3c24xx fiq support:

  arch/arm/mach-s3c/irq-s3c24xx-fiq.S:52:2: error: instruction 'subne' can not set flags, but 's' suffix specified
    subnes pc, lr, #4 @@ return, still have work to do

  arch/arm/mach-s3c/irq-s3c24xx-fiq.S:64:1: error: invalid symbol redefinition
    s3c24xx_spi_fiq_txrx:

There are apparently two problems: one with extraneous or duplicate
labels, and one with old-style opcode mnemonics. Stefan Agner has
previously fixed other problems like this, but missed this particular
file.

Fixes: bec0806cfec6 ("spi_s3c24xx: add FIQ pseudo-DMA support")
Cc: Stefan Agner <stefan@agner.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20210204162416.3030114-1-arnd@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: mvm: set enabled in the PPAG command properly

[ Upstream commit efaa85cf2294d5e10a724e24356507eeb3836f72 ]

When version 2 of the PER_PLATFORM_ANT_GAIN_CMD was implemented, we
started copying the values from the command that we have stored into a
local instance.  But we accidentally forgot to copy the enabled flag,
so in practice PPAG is never really enabled.  Fix this by copying the
flag from our stored data a we should.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Fixes: f2134f66f40e ("iwlwifi: acpi: support ppag table command v2")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210131201908.24d7bf754ad5.I0e8abc2b8747508b6118242533d68c856ca6dffb@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: meson: fix broken wifi node for Khadas VIM3L

[ Upstream commit 39be8f441f78908e97ff913571e10ec03387a63a ]

move &sd_emmc_a ... from /* */ commented area, because cant load wifi fw
without sd-uhs-sdr50 option on VIM3L

[   11.686590] brcmfmac: brcmf_chip_cores_check: CPU core not detected
[   11.696382] brcmfmac: brcmf_sdio_probe_attach: brcmf_chip_attach failed!
[   11.706240] brcmfmac: brcmf_sdio_probe: brcmf_sdio_probe_attach failed
[   11.715890] brcmfmac: brcmf_ops_sdio_probe: F2 error, probe failed -19...
[   13.718424] brcmfmac: brcmf_chip_recognition: chip backplane type 15 is not supported

Signed-off-by: Artem Lapkin <art@khadas.com>
Fixes: f1bb924e8f5b ("arm64: dts: meson: fix mmc0 tuning error on Khadas VIM3")
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210129085041.1408540-1-art@khadas.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: msm8916: Fix reserved and rfsa nodes unit address

[ Upstream commit d5ae2528b0b56cf054b27d48b0cb85330900082f ]

Fix `reserved` and `rfsa` unit address according to their reg address

Fixes: 7258e10e6a0b ("ARM: dts: msm8916: Update reserved-memory")

Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Link: https://lore.kernel.org/r/20210123104417.518105-1-vincent.knecht@mailoo.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: qcom: ocmem: don't return NULL in of_get_ocmem

[ Upstream commit 01f937ffc4686837d6c43dea80c6ade6cbd2940a ]

If ocmem probe fails for whatever reason, of_get_ocmem returned NULL.
Without this, users must check for both NULL and IS_ERR on the returned
pointer - which didn't happen in drivers/gpu/drm/msm/adreno/adreno_gpu.c
leading to a NULL pointer dereference.

Reviewed-by: Brian Masney <masneyb@onstation.org>
Fixes: 88c1e9404f1d ("soc: qcom: add OCMEM driver")
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20210130142349.53335-1-luca@z3ntu.xyz
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: btusb: Fix memory leak in btusb_mtk_wmt_recv

[ Upstream commit de71a6cb4bf24d8993b9ca90d1ddb131b60251a1 ]

In btusb_mtk_wmt_recv if skb_clone fails, the alocated skb should be
released.

Omit the labels “err_out” and “err_free_skb” in this function
implementation so that the desired exception handling code
would be directly specified in the affected if branches.

Fixes: a1c49c434e15 ("btusb: Add protocol support for MediaTek MT7668U USB devices")
Signed-off-by: Jupeng Zhong <zhongjupeng@yulong.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

opp: Correct debug message in _opp_add_static_v2()

[ Upstream commit d7b9d9b31a3e55dcc9b5c289abfafe31efa5b5c4 ]

The debug message always prints rate=0 instead of a proper value, fix it.

Fixes: 6c591eec67cb ("OPP: Add helpers for reading the binding properties")
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Tested-by: Matt Merhar <mattmerhar@protonmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
[ Viresh: Added Fixes tag ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: armada-3720-turris-mox: rename u-boot mtd partition to a53-firmware

[ Upstream commit a9d9bfcadfb43b856dbcf9419de75f7420d5a225 ]

The partition called "u-boot" in reality contains TF-A and U-Boot, and
TF-A is before U-Boot.

Rename this parition to "a53-firmware" to avoid confusion for users,
since they cannot simply build U-Boot from U-Boot repository and flash
the resulting image there. Instead they have to build the firmware with
the sources from the mox-boot-builder repository [1] and flash the
a53-firmware.bin binary there.

[1] https://gitlab.nic.cz/turris/mox-boot-builder

Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: 7109d817db2e ("arm64: dts: marvell: add DTS for Turris Mox")
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: armada388-helios4: assign pinctrl to each fan

[ Upstream commit 46ecdfc1830eaa40a11d7f832089c82b0e67ea96 ]

Split up the pins for each fan. This is needed in order to control them

Fixes: ced8025b569e ("ARM: dts: armada388-helios4")

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: armada388-helios4: assign pinctrl to LEDs

[ Upstream commit e011c9025a4691b5c734029577a920bd6c320994 ]

Split up the pins to match earlier definitions. Allows LEDs to flash
properly.

Fixes: ced8025b569e ("ARM: dts: armada388-helios4")

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: mcp251xfd: mcp251xfd_probe(): fix errata reference

[ Upstream commit 28eb119c042e8d3420b577b5b3ea851a111e7b2d ]

This patch fixes the reference to the errata for both the mcp2517fd
and the mcp2518fd.

Fixes: f5b84dedf7eb ("can: mcp25xxfd: mcp25xxfd_probe(): add SPI clk limit related errata information")
Link: https://lore.kernel.org/r/20210128104644.2982125-2-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: renesas: beacon: Fix EEPROM compatible value

[ Upstream commit 74477936a828a7c91a61ba7e625b7ce2299c8c98 ]

"make dtbs_check" fails with:

    arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dt.yaml: eeprom@50: compatible: 'oneOf' conditional failed, one must be fixed:
    'microchip,at24c64' does not match '^(atmel|catalyst|microchip|nxp|ramtron|renesas|rohm|st),(24(c|cs|lc|mac)[0-9]+|spd)$'

Fix this by dropping the bogus "at" prefix.

Fixes: a1d8a344f1ca0709 ("arm64: dts: renesas: Introduce r8a774a1-beacon-rzg2m-kit")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210128110136.2293490-1-geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/MSR: Filter MSR writes through X86_IOC_WRMSR_REGS ioctl too

[ Upstream commit 02a16aa13574c8526beadfc9ae8cc9b66315fa2d ]

Commit

  a7e1f67ed29f ("x86/msr: Filter MSR writes")

introduced a module parameter to disable writing to the MSR device file
and tainted the kernel upon writing. As MSR registers can be written by
the X86_IOC_WRMSR_REGS ioctl too, the same filtering and tainting should
be applied to the ioctl as well.

 [ bp: Massage commit message and space out statements. ]

Fixes: a7e1f67ed29f ("x86/msr: Filter MSR writes")
Signed-off-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210127122456.13939-1-misono.tomohiro@jp.fujitsu.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: rtl8723bs: wifi_regd.c: Fix incorrect number of regulatory rules

[ Upstream commit 61834c967a929f6b4b7fcb91f43fa225cc29aa19 ]

The custom regulatory ruleset in the rtl8723bs driver lists an incorrect
number of rules: one too many. This results in an out-of-bounds access,
as detected by KASAN. This was possible thanks to the newly added support
for KASAN on ARMv7.

Fix this by filling in the correct number of rules given.

KASAN report:

==================================================================
BUG: KASAN: global-out-of-bounds in cfg80211_does_bw_fit_range+0x14/0x4c [cfg80211]
Read of size 4 at addr bf20c254 by task ip/971

CPU: 2 PID: 971 Comm: ip Tainted: G         C        5.11.0-rc2-00020-gf7fe528a7ebe #1
Hardware name: Allwinner sun8i Family
[<c0113338>] (unwind_backtrace) from [<c010e8a4>] (show_stack+0x10/0x14)
[<c010e8a4>] (show_stack) from [<c0e0f868>] (dump_stack+0x9c/0xb4)
[<c0e0f868>] (dump_stack) from [<c0388284>] (print_address_description.constprop.2+0x1dc/0x2dc)
[<c0388284>] (print_address_description.constprop.2) from [<c03885cc>] (kasan_report+0x1a8/0x1c4)
[<c03885cc>] (kasan_report) from [<bf00a354>] (cfg80211_does_bw_fit_range+0x14/0x4c [cfg80211])
[<bf00a354>] (cfg80211_does_bw_fit_range [cfg80211]) from [<bf00b41c>] (freq_reg_info_regd.part.6+0x108/0x124 [>
[<bf00b41c>] (freq_reg_info_regd.part.6 [cfg80211]) from [<bf00df00>] (handle_channel_custom.constprop.12+0x48/>
[<bf00df00>] (handle_channel_custom.constprop.12 [cfg80211]) from [<bf00e150>] (wiphy_apply_custom_regulatory+0>
[<bf00e150>] (wiphy_apply_custom_regulatory [cfg80211]) from [<bf1fb9e8>] (rtw_regd_init+0x60/0x70 [r8723bs])
[<bf1fb9e8>] (rtw_regd_init [r8723bs]) from [<bf1ee5a8>] (rtw_cfg80211_init_wiphy+0x164/0x1e8 [r8723bs])
[<bf1ee5a8>] (rtw_cfg80211_init_wiphy [r8723bs]) from [<bf1f8d50>] (_netdev_open+0xe4/0x28c [r8723bs])
[<bf1f8d50>] (_netdev_open [r8723bs]) from [<bf1f8f58>] (netdev_open+0x60/0x88 [r8723bs])
[<bf1f8f58>] (netdev_open [r8723bs]) from [<c0bb3730>] (__dev_open+0x178/0x220)
[<c0bb3730>] (__dev_open) from [<c0bb3cdc>] (__dev_change_flags+0x258/0x2c4)
[<c0bb3cdc>] (__dev_change_flags) from [<c0bb3d88>] (dev_change_flags+0x40/0x80)
[<c0bb3d88>] (dev_change_flags) from [<c0bc86fc>] (do_setlink+0x538/0x1160)
[<c0bc86fc>] (do_setlink) from [<c0bcf9e8>] (__rtnl_newlink+0x65c/0xad8)
[<c0bcf9e8>] (__rtnl_newlink) from [<c0bcfeb0>] (rtnl_newlink+0x4c/0x6c)
[<c0bcfeb0>] (rtnl_newlink) from [<c0bc67c8>] (rtnetlink_rcv_msg+0x1f8/0x454)
[<c0bc67c8>] (rtnetlink_rcv_msg) from [<c0c330e4>] (netlink_rcv_skb+0xc4/0x1e0)
[<c0c330e4>] (netlink_rcv_skb) from [<c0c32478>] (netlink_unicast+0x2c8/0x3c4)
[<c0c32478>] (netlink_unicast) from [<c0c32894>] (netlink_sendmsg+0x320/0x5f0)
[<c0c32894>] (netlink_sendmsg) from [<c0b75eb0>] (____sys_sendmsg+0x320/0x3e0)
[<c0b75eb0>] (____sys_sendmsg) from [<c0b78394>] (___sys_sendmsg+0xe8/0x12c)
[<c0b78394>] (___sys_sendmsg) from [<c0b78a50>] (__sys_sendmsg+0xc0/0x120)
[<c0b78a50>] (__sys_sendmsg) from [<c0100060>] (ret_fast_syscall+0x0/0x58)
Exception stack(0xc5693fa8 to 0xc5693ff0)
3fa0:                   00000074 c7a39800 00000003 b6cee648 00000000 00000000
3fc0: 00000074 c7a39800 00000001 00000128 78d18349 00000000 b6ceeda0 004f7cb0
3fe0: 00000128 b6cee5e8 aeca151f aec1d746

The buggy address belongs to the variable:
 rtw_drv_halt+0xf908/0x6b4 [r8723bs]

Memory state around the buggy address:
 bf20c100: 00 00 00 00 00 00 00 00 00 00 04 f9 f9 f9 f9 f9
 bf20c180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>bf20c200: 00 00 00 00 00 00 00 00 00 00 04 f9 f9 f9 f9 f9
                                         ^
 bf20c280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 bf20c300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================

Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20210108141401.31741-1-wens@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc2: Make "trimming xfer length" a debug message

[ Upstream commit 1a9e38cabd80356ffb98c2c88fec528ea9644fd5 ]

With some USB network adapters, such as DM96xx, the following message
is seen for each maximum size receive packet.

dwc2 ff540000.usb: dwc2_update_urb_state(): trimming xfer length

This happens because the packet size requested by the driver is 1522
bytes, wMaxPacketSize is 64, the dwc2 driver configures the chip to
receive 24*64 = 1536 bytes, and the chip does indeed send more than
1522 bytes of data. Since the event does not indicate an error condition,
the message is just noise. Demote it to debug level.

Fixes: 7359d482eb4d3 ("staging: HCD files for the DWC2 driver")
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20210113112052.17063-4-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc2: Abort transaction after errors with unknown reason

[ Upstream commit f74b68c61cbc4b2245022fcce038509333d63f6f ]

In some situations, the following error messages are reported.

dwc2 ff540000.usb: dwc2_hc_chhltd_intr_dma: Channel 1 - ChHltd set, but reason is unknown
dwc2 ff540000.usb: hcint 0x00000002, intsts 0x04000021

This is sometimes followed by:

dwc2 ff540000.usb: dwc2_update_urb_state_abn(): trimming xfer length

and then:

WARNING: CPU: 0 PID: 0 at kernel/v4.19/drivers/usb/dwc2/hcd.c:2913
dwc2_assign_and_init_hc+0x98c/0x990

The warning suggests that an odd buffer address is to be used for DMA.

After an error is observed, the receive buffer may be full
(urb->actual_length >= urb->length). However, the urb is still left in
the queue unless three errors were observed in a row. When it is queued
again, the dwc2 hcd code translates this into a 1-block transfer.
If urb->actual_length (ie the total expected receive length) is not
DMA-aligned, the buffer pointer programmed into the chip will be
unaligned. This results in the observed warning.

To solve the problem, abort input transactions after an error with
unknown cause if the entire packet was already received. This may be
a bit drastic, but we don't really know why the transfer was aborted
even though the entire packet was received. Aborting the transfer in
this situation is less risky than accepting a potentially corrupted
packet.

With this patch in place, the 'ChHltd set' and 'trimming xfer length'
messages are still observed, but there are no more transfer attempts
with odd buffer addresses.

Fixes: 151d0cbdbe860 ("usb: dwc2: make the scheduler handle excessive NAKs better")
Cc: Boris ARZUR <boris@konbu.org>
Cc: Douglas Anderson <dianders@chromium.org>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20210113112052.17063-3-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc2: Do not update data length if it is 0 on inbound transfers

[ Upstream commit 415fa1c7305dedbb345e2cc8ac91769bc1c83f1a ]

The DWC2 documentation states that transfers with zero data length should
set the number of packets to 1 and the transfer length to 0. This is not
currently the case for inbound transfers: the transfer length is set to
the maximum packet length. This can have adverse effects if the chip
actually does transfer data as it is programmed to do. Follow chip
documentation and keep the transfer length set to 0 in that situation.

Fixes: 56f5b1cff22a1 ("staging: Core files for the DWC2 driver")
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20210113112052.17063-2-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: Configure missing thermal interrupt for 4430

[ Upstream commit 44f416879a442600b006ef7dec3a6dc98bcf59c6 ]

We have gpio_86 wired internally to the bandgap thermal shutdown
interrupt on 4430 like we have it on 4460 according to the TRM.
This can be found easily by searching for TSHUT.

For some reason the thermal shutdown interrupt was never added
for 4430, let's add it. I believe this is needed for the thermal
shutdown interrupt handler ti_bandgap_tshut_irq_handler() to call
orderly_poweroff().

Fixes: aa9bb4bb8878 ("arm: dts: add omap4430 thermal data")
Cc: Carl Philipp Klemm <philipp@uvos.xyz>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

memory: ti-aemif: Drop child node when jumping out loop

[ Upstream commit 94e9dd43cf327366388c8f146bccdc6322c0d999 ]

Call of_node_put() to decrement the reference count of the child node
child_np when jumping out of the loop body of
for_each_available_child_of_node(), which is a macro that increments and
decrements the reference count of child node. If the loop is broken, the
reference of the child node should be dropped manually.

Fixes: 5a7c81547c1d ("memory: ti-aemif: introduce AEMIF driver")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Link: https://lore.kernel.org/r/20210121090359.61763-1-bianpan2016@163.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: Put HCI device if inquiry procedure interrupts

[ Upstream commit 28a758c861ff290e39d4f1ee0aa5df0f0b9a45ee ]

Jump to the label done to decrement the reference count of HCI device
hdev on path that the Inquiry procedure is interrupted.

Fixes: 3e13fa1e1fab ("Bluetooth: Fix hci_inquiry ioctl usage")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: drop HCI device reference before return

[ Upstream commit 5a3ef03afe7e12982dc3b978f4c5077c907f7501 ]

Call hci_dev_put() to decrement reference count of HCI device hdev if
fails to duplicate memory.

Fixes: 0b26ab9dce74 ("Bluetooth: AMP: Handle Accept phylink command status evt")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: media: atomisp: Fix size_t format specifier in hmm_alloc() debug statemenet

[ Upstream commit bfe21ef195a9f2785747e698dfd19f75554e2d91 ]

Fix this build warning on 32-bit:

  drivers/staging/media/atomisp/pci/hmm/hmm.c: In function ‘hmm_alloc’:
  drivers/staging/media/atomisp/pci/hmm/hmm.c:272:3: warning: format ‘%ld’ \
     expects argument of type ‘long int’, but argument 6 has type ‘size_t {aka unsigned int}’ [-Wformat=]
     "%s: pages: 0x%08x (%ld bytes), type: %d from highmem %d, user ptr %p, cached %d\n",
     ^

Fixes: 03884c93560c ("media: atomisp: add debug for hmm alloc")
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20201126181150.10576-1-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: ti: pm33xx: Fix some resource leak in the error handling paths of the probe function

[ Upstream commit 17ad4662595ea0c4fd7496b664523ef632e63349 ]

'am33xx_pm_rtc_setup()' allocates some resources that must be freed on the
error. Commit 2152fbbd47c0 ("soc: ti: pm33xx: Simplify RTC usage to prepare
to drop platform data") has introduced the use of these resources but has
only updated the remove function.

Fix the error handling path of the probe function now.

Fixes: 2152fbbd47c0 ("soc: ti: pm33xx: Simplify RTC usage to prepare to drop platform data")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: qcom: socinfo: Fix an off by one in qcom_show_pmic_model()

[ Upstream commit 5fb33d8960dc7abdabc6fe599a30c2c99b082ef6 ]

These need to be < ARRAY_SIZE() instead of <= ARRAY_SIZE() to prevent
accessing one element beyond the end of the array.

Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Fixes: e9247e2ce577 ("soc: qcom: socinfo: fix printing of pmic_model")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YAf+o85Z9lgkq3Nw@mwanda
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sdm845-db845c: Fix reset-pin of ov8856 node

[ Upstream commit d4863ef399a29cae3001b3fedfd2864e651055ba ]

Switch reset pin of ov8856 node from GPIO_ACTIVE_HIGH to GPIO_ACTIVE_LOW,
this issue prevented the ov8856 from probing properly as it did not respon
to I2C messages.

Fixes: d4919a44564b ("arm64: dts: qcom: sdm845-db845c: Add ov8856 & ov7251
camera nodes")

Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://lore.kernel.org/r/20201221100955.148584-1-robert.foss@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: u_audio: Free requests only after callback

[ Upstream commit 7de8681be2cde9f6953d3be1fa6ce05f9fe6e637 ]

As per the kernel doc for usb_ep_dequeue(), it states that "this
routine is asynchronous, that is, it may return before the completion
routine runs". And indeed since v5.0 the dwc3 gadget driver updated
its behavior to place dequeued requests on to a cancelled list to be
given back later after the endpoint is stopped.

The free_ep() was incorrectly assuming that a request was ready to
be freed after calling dequeue which results in a use-after-free
in dwc3 when it traverses its cancelled list. Fix this by moving
the usb_ep_free_request() call to the callback itself in case the
ep is disabled.

Fixes: eb9fecb9e69b0 ("usb: gadget: f_uac2: split out audio core")
Reported-and-tested-by: Ferry Toth <fntoth@gmail.com>
Reviewed-and-tested-by: Peter Chen <peter.chen@nxp.com>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20210118084642.322510-2-jbrunet@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPICA: Fix exception code class checks

[ Upstream commit 3dfaea3811f8b6a89a347e8da9ab862cdf3e30fe ]

ACPICA commit 1a3a549286ea9db07d7ec700e7a70dd8bcc4354e

The macros to classify different AML exception codes are broken. For
instance,

  ACPI_ENV_EXCEPTION(Status)

will always evaluate to zero due to

  #define AE_CODE_ENVIRONMENTAL      0x0000
  #define ACPI_ENV_EXCEPTION(Status) (Status & AE_CODE_ENVIRONMENTAL)

Similarly, ACPI_AML_EXCEPTION(Status) will evaluate to a non-zero
value for error codes of type AE_CODE_PROGRAMMER, AE_CODE_ACPI_TABLES,
as well as AE_CODE_AML, and not just AE_CODE_AML as the name suggests.

This commit fixes those checks.

Fixes: d46b6537f0ce ("ACPICA: AML Parser: ignore all exceptions resulting from incorrect AML during table load")
Link: https://github.com/acpica/acpica/commit/1a3a5492
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: rockchip: rk3328: Add clock_in_out property to gmac2phy node

[ Upstream commit c6433083f5930fdf52ad47c8c0459719c810dc89 ]

The gmac2phy is integrated with the PHY within the SoC. Any properties
related to this integration can be included in the .dtsi file, instead
of having board dts files specify them separately.

Add the clock_in_out property to specify the direction of the PHY clock.
This is the minimum required to have gmac2phy working on Linux. Other
examples include assigned-clocks, assigned-clock-rates, and
assigned-clock-parents properties, but the hardware default plus the
implementation requesting the appropriate clock rate also works.

Fixes: 9c4cc910fe28 ("ARM64: dts: rockchip: Add gmac2phy node support for rk3328")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20210117100710.4857-2-wens@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: brcmstb-avs-cpufreq: Fix resource leaks in ->remove()

[ Upstream commit 3657f729b6fb5f2c0bf693742de2dcd49c572aa1 ]

If 'cpufreq_unregister_driver()' fails, just WARN and continue, so that
other resources are freed.

Fixes: de322e085995 ("cpufreq: brcmstb-avs-cpufreq: AVS CPUfreq driver for Broadcom STB SoCs")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ Viresh: Updated Subject ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: brcmstb-avs-cpufreq: Free resources in error path

[ Upstream commit 05f456286fd489558c72a4711d22a5612c965685 ]

If 'cpufreq_register_driver()' fails, we must release the resources
allocated in 'brcm_avs_prepare_init()' as already done in the remove
function.

To do that, introduce a new function 'brcm_avs_prepare_uninit()' in order
to avoid code duplication. This also makes the code more readable (IMHO).

Fixes: de322e085995 ("cpufreq: brcmstb-avs-cpufreq: AVS CPUfreq driver for Broadcom STB SoCs")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ Viresh: Updated Subject ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: msm8916-samsung-a2015: Fix sensors

[ Upstream commit 3716a583fe0bbe3babf4ce260064a7fa13d6d989 ]

When the BMC150 accelerometer/magnetometer was added to the device tree,
the sensors were working without specifying any regulator supplies,
likely because the regulators were on by default and then never turned off.

For some reason, this is no longer the case for pm8916_l17, which prevents
the sensors from working in some cases.

Now that the bmc150_accel/bmc150_magn drivers can enable necessary
regulators, declare the necessary regulator supplies to make the sensors
work again.

Fixes: 079f81acf10f ("arm64: dts: qcom: msm8916-samsung-a2015: Add accelerometer/magnetometer")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210111175358.97171-1-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: allwinner: A64: Limit MMC2 bus frequency to 150 MHz

[ Upstream commit 948c657cc45e8ce48cb533d4e2106145fa765759 ]

In contrast to the H6 (and later) manuals, the A64 datasheet does not
specify any limitations in the maximum possible frequency for eMMC
controllers.
However experimentation has found that a 150 MHz limit similar to other
SoCs and also the MMC0 and MMC1 controllers on the A64 seems to exist
for the MMC2 controller.

Limit the frequency for the MMC2 controller to 150 MHz in the SoC .dtsi.
The Pinebook seems to be the an odd exception, since it apparently seems
to work with 200 MHz as well, so overwrite this in its board .dts file.

Tested on a Pine64-LTS: 200 MHz HS-200 fails, 150 MHz HS-200 works.

Fixes: 22be992faea7 ("arm64: allwinner: a64: Increase the MMC max frequency")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210113152630.28810-7-andre.przywara@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: allwinner: H6: Allow up to 150 MHz MMC bus frequency

[ Upstream commit cfe6c487b9a1abc6197714ec5605716a5428cf03 ]

The H6 manual explicitly lists a frequency limit of 150 MHz for the bus
frequency of the MMC controllers. So far we had no explicit limits in the
DT, which limited eMMC to the spec defined frequencies, or whatever the
driver defines (both Linux and FreeBSD use 52 MHz here).

Put those maximum frequencies in the SoC .dtsi, to allow higher speed
modes (which still would need to be explicitly enabled, per board).

Tested with an eMMC using HS-200 on a Pine H64. Running at the spec'ed
200 MHz indeed fails with I/O errors, but 150 MHz seems to work stably.

Fixes: 8f54bd1595b3 ("arm64: allwinner: h6: add device tree nodes for MMC controllers")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210113152630.28810-6-andre.przywara@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: allwinner: Drop non-removable from SoPine/LTS SD card

[ Upstream commit 941432d007689f3774646e41a1439228b6c6ee0e ]

The SD card on the SoPine SoM module is somewhat concealed, so was
originally defined as "non-removable".
However there is a working card-detect pin (tested on two different
SoM versions), and in certain SoM base boards it might be actually
accessible at runtime.
Also the Pine64-LTS shares the SoPine base .dtsi, so inherited the
non-removable flag, even though the SD card slot is perfectly accessible
and usable there. (It turns out that just *my* board has a broken card
detect switch, so I originally thought CD wouldn't work on the LTS.)

Drop the "non-removable" flag to describe the SD card slot properly.

Fixes: c3904a269891 ("arm64: allwinner: a64: add DTSI file for SoPine SoM")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210113152630.28810-5-andre.przywara@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: allwinner: H6: properly connect USB PHY to port 0

[ Upstream commit da2fb8457f71138d455cba82edec0d34f858e506 ]

In recent Allwinner SoCs the first USB host controller (HCI0) shares
the first PHY with the MUSB controller. Probably to make this sharing
work, we were avoiding to declare this in the DT. This has two
shortcomings:
- U-Boot (which uses the same .dts) cannot use this port in host mode
  without a PHY linked, so we were loosing one USB port there.
- It requires the MUSB driver to be enabled and loaded, although we
  don't actually use it.

To avoid those issues, let's add this PHY link to the H6 .dtsi file.
After all PHY port 0 *is* connected to HCI0, so we should describe
it as this.

This makes it work in U-Boot, also improves compatiblity when no MUSB
driver is loaded (for instance in distribution installers).

Fixes: eabb3d424b6d ("arm64: dts: allwinner: h6: add USB2-related device nodes")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210113152630.28810-3-andre.przywara@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: allwinner: A64: properly connect USB PHY to port 0

[ Upstream commit cc72570747e43335f4933a24dd74d5653639176a ]

In recent Allwinner SoCs the first USB host controller (HCI0) shares
the first PHY with the MUSB controller. Probably to make this sharing
work, we were avoiding to declare this in the DT. This has two
shortcomings:
- U-Boot (which uses the same .dts) cannot use this port in host mode
  without a PHY linked, so we were loosing one USB port there.
- It requires the MUSB driver to be enabled and loaded, although we
  don't actually use it.

To avoid those issues, let's add this PHY link to the A64 .dtsi file.
After all PHY port 0 *is* connected to HCI0, so we should describe
it as this. Remove the part from the Pinebook DTS which already had
this property.

This makes it work in U-Boot, also improves compatiblity when no MUSB
driver is loaded (for instance in distribution installers).

Fixes: dc03a047df1d ("arm64: allwinner: a64: add EHCI0/OHCI0 nodes to A64 DTSI")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210113152630.28810-2-andre.przywara@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: arm_scmi: Fix call site of scmi_notification_exit

[ Upstream commit a90b6543bf062d65292b2c76f1630507d1c9d8ec ]

Call scmi_notification_exit() only when SCMI platform driver instance has
been really successfully removed.

Link: https://lore.kernel.org/r/20210112191326.29091-1-cristian.marussi@arm.com
Fixes: 6b8a69131dc63 ("firmware: arm_scmi: Enable notification core")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
[sudeep.holla: Move the call outside the list mutex locking]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Avoid warning when re-casting __bpf_call_base into __bpf_call_base_args

[ Upstream commit 6943c2b05bf09fd5c5729f7d7d803bf3f126cb9a ]

BPF interpreter uses extra input argument, so re-casts __bpf_call_base into
__bpf_call_base_args. Avoid compiler warning about incompatible function
prototypes by casting to void * first.

Fixes: 1ea47e01ad6e ("bpf: add support for bpf_call to interpreter")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210112075520.4103414-3-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Add bpf_patch_call_args prototype to include/linux/bpf.h

[ Upstream commit a643bff752dcf72a07e1b2ab2f8587e4f51118be ]

Add bpf_patch_call_args() prototype. This function is called from BPF verifier
and only if CONFIG_BPF_JIT_ALWAYS_ON is not defined. This fixes compiler
warning about missing prototype in some kernel configurations.

Fixes: 1ea47e01ad6e ("bpf: add support for bpf_call to interpreter")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210112075520.4103414-2-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: dwmac-meson8b: fix enabling the timing-adjustment clock

[ Upstream commit 025822884a4fd2d0af51dcf77ddc494e60c5ff63 ]

The timing-adjustment clock only has to be enabled when a) there is a
2ns RX delay configured using device-tree and b) the phy-mode indicates
that the RX delay should be enabled.

Only enable the RX delay if both are true, instead of (by accident) also
enabling it when there's the 2ns RX delay configured but the phy-mode
incicates that the RX delay is not used.

Fixes: 9308c47640d515 ("net: stmmac: dwmac-meson8b: add support for the RX delay configuration")
Reported-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: msm8916-samsung-a5u: Fix iris compatible

[ Upstream commit 826e6faf49ae1eb065759a30832a2e34740bd8b1 ]

Unlike most MSM8916 boards, samsung-a5u uses WCN3660B instead of
WCN3620 to support the 5 GHz band additionally.

WCN3660B has similar requirements as WCN3620, but it needs the XO
clock to run at 48 MHz instead of 19.2 MHz. So far it was possible
to describe that configuration using the qcom,wcn3680 compatible.

However, as of commit 8490987bdb9a ("wcn36xx: Hook and identify RF_IRIS_WCN3680"),
the wcn36xx driver will now use the qcom,wcn3680 compatible
to enable functionality specific to WCN3680. In particular,
WCN3680 supports 802.11ac, which is not available in WCN3660B.

Use the new qcom,wcn3660b compatible to describe the chip properly.

Fixes: 0d7051999175 ("arm64: dts: msm8916-samsung-a5u: Override iris compatible")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210106102134.59801-4-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: vchiq: Fix bulk transfers on 64-bit builds

[ Upstream commit 88753cc19f087abe0d39644b844e67a59cfb5a3d ]

The recent change to the bulk transfer compat function missed the fact
the relevant ioctl command is VCHIQ_IOC_QUEUE_BULK_TRANSMIT32, not
VCHIQ_IOC_QUEUE_BULK_TRANSMIT, as any attempt to send a bulk block
to the VPU would have shown.

Fixes: a4367cd2b231 ("staging: vchiq: convert compat bulk transfer")
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Link: https://lore.kernel.org/r/20210105162030.1415213-3-phil@raspberrypi.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: vchiq: Fix bulk userdata handling

[ Upstream commit 96ae327678eceabf455b11a88ba14ad540d4b046 ]

The addition of the local 'userdata' pointer to
vchiq_irq_queue_bulk_tx_rx omitted the case where neither BLOCKING nor
WAITING modes are used, in which case the value provided by the
caller is not returned to them as expected, but instead it is replaced
with a NULL. This lack of a suitable context may cause the application
to crash or otherwise malfunction.

Fixes: 4184da4f316a ("staging: vchiq: fix __user annotations")
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Link: https://lore.kernel.org/r/20210105162030.1415213-2-phil@raspberrypi.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: hci_qca: Fix memleak in qca_controller_memdump

[ Upstream commit 71f8e707557b9bc25dc90a59a752528d4e7c1cbf ]

When __le32_to_cpu() fails, qca_memdump should be freed
just like when vmalloc() fails.

Fixes: d841502c79e3f ("Bluetooth: hci_qca: Collect controller memory dump during SSR")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

memory: mtk-smi: Fix PM usage counter unbalance in mtk_smi ops

[ Upstream commit a2d522ff0f5cc26915c4ccee9457fd4b4e1edc48 ]

pm_runtime_get_sync will increment pm usage counter
even it failed. Forgetting to putting operation will
result in reference leak here. We fix it by replacing
it with pm_runtime_resume_and_get to keep usage counter
balanced.

Fixes: 4f0a1a1ae3519 ("memory: mtk-smi: Invoke pm runtime_callback to enable clocks")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201123102118.3866195-1-zhangqilong3@huawei.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: exynos: correct PMIC interrupt trigger level on Espresso

[ Upstream commit 1fea2eb2f5bbd3fbbe2513d2386b5f6e6db17fd7 ]

The Samsung PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU.  Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.

Fixes: 9589f7721e16 ("arm64: dts: Add S2MPS15 PMIC node on exynos7-espresso")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210212903.216728-8-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: exynos: correct PMIC interrupt trigger level on TM2

[ Upstream commit e98e2367dfb4b6d7a80c8ce795c644124eff5f36 ]

The Samsung PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU.  Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.

Fixes: 01e5d2352152 ("arm64: dts: exynos: Add dts file for Exynos5433-based TM2 board")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20201210212903.216728-7-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: exynos: correct PMIC interrupt trigger level on Odroid XU3 family

[ Upstream commit 3e7d9a583a24f7582c6bc29a0d4d624feedbc2f9 ]

The Samsung PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU.  The falling edge
interrupt will mostly work but it's not correct.

Fixes: aac4e0615341 ("ARM: dts: odroidxu3: Enable wake alarm of S2MPS11 RTC")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20201210212903.216728-6-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: exynos: correct PMIC interrupt trigger level on Arndale Octa

[ Upstream commit 1ac8893c4fa3d4a34915dc5cdab568a39db5086c ]

The Samsung PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU.  The falling edge
interrupt will mostly work but it's not correct.

Fixes: 1fed2252713e ("ARM: dts: fix pinctrl for s2mps11-irq on exynos5420-arndale-octa")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20201210212903.216728-5-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: exynos: correct PMIC interrupt trigger level on Spring

[ Upstream commit 77e6a5467cb8657cf8b5e610a30a4c502085e4f9 ]

The Samsung PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU.  Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.

Fixes: 53dd4138bb0a ("ARM: dts: Add exynos5250-spring device tree")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210212903.216728-4-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: exynos: correct PMIC interrupt trigger level on Rinato

[ Upstream commit 437ae60947716bb479e2f32466f49445c0509b1e ]

The Samsung PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU.  Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.

Fixes: faaf348ef468 ("ARM: dts: Add board dts file for exynos3250-rinato")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20201210212903.216728-3-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: exynos: correct PMIC interrupt trigger level on Monk

[ Upstream commit 8528cda2b7c667e9cd173aef1a677c71b7d5a096 ]

The Samsung PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU.  Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.

Fixes: e0cefb3f79d3 ("ARM: dts: add board dts file for Exynos3250-based Monk board")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210212903.216728-2-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: exynos: correct PMIC interrupt trigger level on Artik 5

[ Upstream commit cb31334687db31c691901269d65074a7ffaecb18 ]

The Samsung PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU.  Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.

Fixes: b004a34bd0ff ("ARM: dts: exynos: Add exynos3250-artik5 dtsi file for ARTIK5 module")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20201210212903.216728-1-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: renesas: beacon: Fix audio-1.8V pin enable

[ Upstream commit 5a5da0b758b327b727c5392d7f11e046e113a195 ]

The fact the audio worked at all was a coincidence because the wrong
gpio enable was used.  Use the correct GPIO pin to ensure its operation.

Fixes: a1d8a344f1ca ("arm64: dts: renesas: Introduce r8a774a1-beacon-rzg2m-kit")
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20201213183759.223246-6-aford173@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: renesas: beacon kit: Fix choppy Bluetooth Audio

[ Upstream commit db030c5a9658846a42fbed4d43a8b5f28a2d7ab7 ]

The Bluetooth chip is capable of operating at 4Mbps, but the
max-speed setting was on the UART node instead of the Bluetooth
node, so the chip didn't operate at the correct speed resulting
in choppy audio.  Fix this by setting the max-speed in the proper
node.

Fixes: a1d8a344f1ca ("arm64: dts: renesas: Introduce r8a774a1-beacon-rzg2m-kit")
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20201213183759.223246-3-aford173@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: Fix initializing response id after clearing struct

[ Upstream commit a5687c644015a097304a2e47476c0ecab2065734 ]

Looks like this was missed when patching the source to clear the structures
throughout, causing this one instance to clear the struct after the response
id is assigned.

Fixes: eddb7732119d ("Bluetooth: A2MP: Fix not initializing all members")
Signed-off-by: Christopher William Snowhill <chris@kode54.net>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: hci_uart: Fix a race for write_work scheduling

[ Upstream commit afe0b1c86458f121b085271e4f3034017a90d4a3 ]

In hci_uart_write_work, there is a loop/goto checking the value of
HCI_UART_TX_WAKEUP. If HCI_UART_TX_WAKEUP is set again, it keeps trying
hci_uart_dequeue; otherwise, it clears HCI_UART_SENDING and returns.

In hci_uart_tx_wakeup, if HCI_UART_SENDING is already set, it sets
HCI_UART_TX_WAKEUP, skips schedule_work and assumes the running/pending
hci_uart_write_work worker will do hci_uart_dequeue properly.

However, if the HCI_UART_SENDING check in hci_uart_tx_wakeup is done after
the loop breaks, but before HCI_UART_SENDING is cleared in
hci_uart_write_work, the schedule_work is skipped incorrectly.

Fix this race by changing the order of HCI_UART_SENDING and
HCI_UART_TX_WAKEUP modification.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Fixes: 82f5169bf3d3 ("Bluetooth: hci_uart: add serdev driver support library")
Signed-off-by: Claire Chang <tientzu@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: btqcomsmd: Fix a resource leak in error handling paths in the probe function

[ Upstream commit 9a39a927be01d89e53f04304ab99a8761e08910d ]

Some resource should be released in the error handling path of the probe
function, as already done in the remove function.

The remove function was fixed in commit 5052de8deff5 ("soc: qcom: smd:
Transition client drivers from smd to rpmsg")

Fixes: 1511cc750c3d ("Bluetooth: Introduce Qualcomm WCNSS SMD based HCI driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath10k: Fix error handling in case of CE pipe init failure

[ Upstream commit 31561e8557cd1eeba5806ac9ce820f8323b2201b ]

Currently if the copy engine pipe init fails for snoc based
chipsets, the rri is not freed.

Fix this error handling for copy engine pipe init
failure.

Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1

Fixes: 4945af5b264f ("ath10k: enable SRRI/DRRI support on ddr for WCN3990")
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1607713210-18320-1-git-send-email-pillair@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>