x86/cpu/hygon: Fix the CPU topology evaluation for real

commit ee545b94d39a00c93dc98b1dbcbcf731d2eadeb4 upstream.

Hygon processors with a model ID > 3 have CPUID leaf 0xB correctly
populated and don't need the fixed package ID shift workaround. The fixup
is also incorrect when running in a guest.

Fixes: e0ceeae708ce ("x86/CPU/hygon: Fix phys_proc_id calculation logic for multi-die processors")
Signed-off-by: Pu Wen <puwen@hygon.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/tencent_594804A808BD93A4EBF50A994F228E3A7F07@qq.com
Link: https://lore.kernel.org/r/20230814085112.089607918@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/apic/msi: Fix misconfigured non-maskable MSI quirk

commit b56ebe7c896dc78b5865ec2c4b1dae3c93537517 upstream.

commit ef8dd01538ea ("genirq/msi: Make interrupt allocation less
convoluted"), reworked the code so that the x86 specific quirk for affinity
setting of non-maskable PCI/MSI interrupts is not longer activated if
necessary.

This could be solved by restoring the original logic in the core MSI code,
but after a deeper analysis it turned out that the quirk flag is not
required at all.

The quirk is only required when the PCI/MSI device cannot mask the MSI
interrupts, which in turn also prevents reservation mode from being enabled
for the affected interrupt.

This allows ot remove the NOMASK quirk bit completely as msi_set_affinity()
can instead check whether reservation mode is enabled for the interrupt,
which gives exactly the same answer.

Even in the momentary non-existing case that the reservation mode would be
not set for a maskable MSI interrupt this would not cause any harm as it
just would cause msi_set_affinity() to go needlessly through the
functionaly equivalent slow path, which works perfectly fine with maskable
interrupts as well.

Rework msi_set_affinity() to query the reservation mode and remove all
NOMASK quirk logic from the core code.

[ tglx: Massaged changelog ]

Fixes: ef8dd01538ea ("genirq/msi: Make interrupt allocation less convoluted")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231026032036.2462428-1-den@valinux.co.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/PCI: Avoid PME from D3hot/D3cold for AMD Rembrandt and Phoenix USB4

commit 7d08f21f8c6307cb05cabb8d86e90ff6ccba57e9 upstream.

Iain reports that USB devices can't be used to wake a Lenovo Z13 from
suspend.  This occurs because on some AMD platforms, even though the Root
Ports advertise PME_Support for D3hot and D3cold, wakeup events from
devices on a USB4 controller don't result in wakeup interrupts from the
Root Port when amd-pmc has put the platform in a hardware sleep state.

If amd-pmc will be involved in the suspend, remove D3hot and D3cold from
the PME_Support mask of Root Ports above USB4 controllers so we avoid those
states if we need wakeups.

Restore D3 support at resume so that it can be used by runtime suspend.

This affects both AMD Rembrandt and Phoenix SoCs.

"pm_suspend_target_state == PM_SUSPEND_ON" means we're doing runtime
suspend, and amd-pmc will not be involved.  In that case PMEs work as
advertised in D3hot/D3cold, so we don't need to do anything.

Note that amd-pmc is technically optional, and there's no need for this
quirk if it's not present, but we assume it's always present because power
consumption is so high without it.

Fixes: 9d26d3a8f1b0 ("PCI: Put PCIe ports into D3 during suspend")
Link: https://lore.kernel.org/r/20231004144959.158840-1-mario.limonciello@amd.com
Reported-by: Iain Lane <iain@orangesquash.org.uk>
Closes: https://forums.lenovo.com/t5/Ubuntu/Z13-can-t-resume-from-suspend-with-external-USB-keyboard/m-p/5217121
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
[bhelgaas: commit log, move to arch/x86/pci/fixup.c, add #includes]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: x86/sha - load modules based on CPU features

commit 1c43c0f1f84aa59dfc98ce66f0a67b2922aa7f9d upstream.

x86 optimized crypto modules are built as modules rather than build-in and
they are not loaded when the crypto API is initialized, resulting in the
generic builtin module (sha1-generic) being used instead.

It was discovered when creating a sha1/sha256 checksum of a 2Gb file by
using kcapi-tools because it would take significantly longer than creating
a sha512 checksum of the same file. trace-cmd showed that for sha1/256 the
generic module was used, whereas for sha512 the optimized module was used
instead.

Add module aliases() for these x86 optimized crypto modules based on CPU
feature bits so udev gets a chance to load them later in the boot
process. This resulted in ~3x decrease in the real-time execution of
kcapi-dsg.

Fix is inspired from commit
aa031b8f702e ("crypto: x86/sha512 - load based on CPU features")
where a similar fix was done for sha512.

Cc: stable@vger.kernel.org # 5.15+
Suggested-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Suggested-by: Julian Andres Klode <julian.klode@canonical.com>
Signed-off-by: Roxana Nicolescu <roxana.nicolescu@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/shstk: Delay signal entry SSP write until after user accesses

commit 31255e072b2e91f97645d792d25b2db744186dd1 upstream.

When a signal is being delivered, the kernel needs to make accesses to
userspace. These accesses could encounter an access error, in which case
the signal delivery itself will trigger a segfault. Usually this would
result in the kernel killing the process. But in the case of a SEGV signal
handler being configured, the failure of the first signal delivery will
result in *another* signal getting delivered. The second signal may
succeed if another thread has resolved the issue that triggered the
segfault (i.e. a well timed mprotect()/mmap()), or the second signal is
being delivered to another stack (i.e. an alt stack).

On x86, in the non-shadow stack case, all the accesses to userspace are
done before changes to the registers (in pt_regs). The operation is
aborted when an access error occurs, so although there may be writes done
for the first signal, control flow changes for the signal (regs->ip,
regs->sp, etc) are not committed until all the accesses have already
completed successfully. This means that the second signal will be
delivered as if it happened at the time of the first signal. It will
effectively replace the first aborted signal, overwriting the half-written
frame of the aborted signal. So on sigreturn from the second signal,
control flow will resume happily from the point of control flow where the
original signal was delivered.

The problem is, when shadow stack is active, the shadow stack SSP
register/MSR is updated *before* some of the userspace accesses. This
means if the earlier accesses succeed and the later ones fail, the second
signal will not be delivered at the same spot on the shadow stack as the
first one. So on sigreturn from the second signal, the SSP will be
pointing to the wrong location on the shadow stack (off by a frame).

Pengfei privately reported that while using a shadow stack enabled glibc,
the “signal06” test in the LTP test-suite hung. It turns out it is
testing the above described double signal scenario. When this test was
compiled with shadow stack, the first signal pushed a shadow stack
sigframe, then the second pushed another. When the second signal was
handled, the SSP was at the first shadow stack signal frame instead of
the original location. The test then got stuck as the #CP from the twice
incremented SSP was incorrect and generated segfaults in a loop.

Fix this by adjusting the SSP register only after any userspace accesses,
such that there can be no failures after the SSP is adjusted. Do this by
moving the shadow stack sigframe push logic to happen after all other
userspace accesses.

Note, sigreturn (as opposed to the signal delivery dealt with in this
patch) has ordering behavior that could lead to similar failures. The
ordering issues there extend beyond shadow stack to include the alt stack
restoration. Fixing that would require cross-arch changes, and the
ordering today does not cause any known test or apps breakages. So leave
it as is, for now.

[ dhansen: minor changelog/subject tweak ]

Fixes: 05e36022c054 ("x86/shstk: Handle signals for shadow stack")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20231107182251.91276-1-rick.p.edgecombe%40intel.com
Link: https://github.com/linux-test-project/ltp/blob/master/testcases/kernel/syscalls/signal/signal06.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: ufs: core: Fix racing issue between ufshcd_mcq_abort() and ISR

commit 27900d7119c464b43cd9eac69c85884d17bae240 upstream.

If command timeout happens and cq complete IRQ is raised at the same time,
ufshcd_mcq_abort clears lprb->cmd and a NULL pointer deref happens in the
ISR. Error log:

ufshcd_abort: Device abort task at tag 18
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000108
pc : [0xffffffe27ef867ac] scsi_dma_unmap+0xc/0x44
lr : [0xffffffe27f1b898c] ufshcd_release_scsi_cmd+0x24/0x114

Fixes: f1304d442077 ("scsi: ufs: mcq: Added ufshcd_mcq_abort()")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20231106075117.8995-1-peter.wang@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Fix system crash due to bad pointer access

commit 19597cad64d608aa8ac2f8aef50a50187a565223 upstream.

User experiences system crash when running AER error injection.  The
perturbation causes the abort-all-I/O path to trigger. The driver assumes
all I/O on this path is FCP only. If there is both NVMe & FCP traffic, a
system crash happens. Add additional check to see if I/O is FCP or not
before access.

PID: 999019  TASK: ff35d769f24722c0  CPU: 53  COMMAND: "kworker/53:1"
 0 [ff3f78b964847b58] machine_kexec at ffffffffae86973d
 1 [ff3f78b964847ba8] __crash_kexec at ffffffffae9be29d
 2 [ff3f78b964847c70] crash_kexec at ffffffffae9bf528
 3 [ff3f78b964847c78] oops_end at ffffffffae8282ab
 4 [ff3f78b964847c98] exc_page_fault at ffffffffaf2da502
 5 [ff3f78b964847cc0] asm_exc_page_fault at ffffffffaf400b62
   [exception RIP: qla2x00_abort_srb+444]
   RIP: ffffffffc07b5f8c  RSP: ff3f78b964847d78  RFLAGS: 00010046
   RAX: 0000000000000282  RBX: ff35d74a0195a200  RCX: ff35d76886fd03a0
   RDX: 0000000000000001  RSI: ffffffffc07c5ec8  RDI: ff35d74a0195a200
   RBP: ff35d76913d22080   R8: ff35d7694d103200   R9: ff35d7694d103200
   R10: 0000000100000000  R11: ffffffffb05d6630  R12: 0000000000010000
   R13: ff3f78b964847df8  R14: ff35d768d8754000  R15: ff35d768877248e0
   ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 6 [ff3f78b964847d70] qla2x00_abort_srb at ffffffffc07b5f84 [qla2xxx]
 7 [ff3f78b964847de0] __qla2x00_abort_all_cmds at ffffffffc07b6238 [qla2xxx]
 8 [ff3f78b964847e38] qla2x00_abort_all_cmds at ffffffffc07ba635 [qla2xxx]
 9 [ff3f78b964847e58] qla2x00_terminate_rport_io at ffffffffc08145eb [qla2xxx]
10 [ff3f78b964847e70] fc_terminate_rport_io at ffffffffc045987e [scsi_transport_fc]
11 [ff3f78b964847e88] process_one_work at ffffffffae914f15
12 [ff3f78b964847ed0] worker_thread at ffffffffae9154c0
13 [ff3f78b964847f10] kthread at ffffffffae91c456
14 [ff3f78b964847f50] ret_from_fork at ffffffffae8036ef

Cc: stable@vger.kernel.org
Fixes: f45bca8c5052 ("scsi: qla2xxx: Fix double scsi_done for abort path")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20231030064912.37912-1-njavali@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: ufs: qcom: Update PHY settings only when scaling to higher gears

commit fc88ca19ad0989dc0e4d4b126d5d0ba91f6cb616 upstream.

The "hs_gear" variable is used to program the PHY settings (submode) during
ufs_qcom_power_up_sequence(). Currently, it is being updated every time the
agreed gear changes. Due to this, if the gear got downscaled before suspend
(runtime/system), then while resuming, the PHY settings for the lower gear
will be applied first and later when scaling to max gear with REINIT, the
PHY settings for the max gear will be applied.

This adds a latency while resuming and also really not needed as the PHY
gear settings are backwards compatible i.e., we can continue using the PHY
settings for max gear with lower gear speed.

So let's update the "hs_gear" variable _only_ when the agreed gear is
greater than the current one. This guarantees that the PHY settings will be
changed only during probe time and fatal error condition.

Due to this, UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH can now be skipped
when the PM operation is in progress.

Cc: stable@vger.kernel.org
Fixes: 96a7141da332 ("scsi: ufs: core: Add support for reinitializing the UFS device")
Reported-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230908145329.154024-1-manivannan.sadhasivam@linaro.org
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Tested-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: megaraid_sas: Increase register read retry rount from 3 to 30 for selected registers

commit 8e3ed9e786511ad800c33605ed904b9de49323cf upstream.

In BMC environments with concurrent access to multiple registers, certain
registers occasionally yield a value of 0 even after 3 retries due to
hardware errata. As a fix, we have extended the retry count from 3 to 30.

The same errata applies to the mpt3sas driver, and a similar patch has
been accepted. Please find more details in the mpt3sas patch reference
link.

Link: https://lore.kernel.org/r/20230829090020.5417-2-ranjan.kumar@broadcom.com
Fixes: 272652fcbf1a ("scsi: megaraid_sas: add retry logic in megasas_readl")
Cc: stable@vger.kernel.org
Signed-off-by: Chandrakanth patil <chandrakanth.patil@broadcom.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Link: https://lore.kernel.org/r/20231003110021.168862-2-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: mpt3sas: Fix loop logic

commit 3c978492c333f0c08248a8d51cecbe5eb5f617c9 upstream.

The retry loop continues to iterate until the count reaches 30, even after
receiving the correct value. Exit loop when a non-zero value is read.

Fixes: 4ca10f3e3174 ("scsi: mpt3sas: Perform additional retries if doorbell read returns 0")
Cc: stable@vger.kernel.org
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20231020105849.6350-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Fix precision tracking for BPF_ALU | BPF_TO_BE | BPF_END

commit 291d044fd51f8484066300ee42afecf8c8db7b3a upstream.

BPF_END and BPF_NEG has a different specification for the source bit in
the opcode compared to other ALU/ALU64 instructions, and is either
reserved or use to specify the byte swap endianness. In both cases the
source bit does not encode source operand location, and src_reg is a
reserved field.

backtrack_insn() currently does not differentiate BPF_END and BPF_NEG
from other ALU/ALU64 instructions, which leads to r0 being incorrectly
marked as precise when processing BPF_ALU | BPF_TO_BE | BPF_END
instructions. This commit teaches backtrack_insn() to correctly mark
precision for such case.

While precise tracking of BPF_NEG and other BPF_END instructions are
correct and does not need fixing, this commit opt to process all BPF_NEG
and BPF_END instructions within the same if-clause to better align with
current convention used in the verifier (e.g. check_alu_op).

Fixes: b5dc0163d8fd ("bpf: precise scalar_value tracking")
Cc: stable@vger.kernel.org
Reported-by: Mohamed Mahmoud <mmahmoud@redhat.com>
Closes: https://lore.kernel.org/r/87jzrrwptf.fsf@toke.dk
Tested-by: Toke Høiland-Jørgensen <toke@redhat.com>
Tested-by: Tao Lyu <tao.lyu@epfl.ch>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://lore.kernel.org/r/20231102053913.12004-2-shung-hsi.yu@suse.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Fix check_stack_write_fixed_off() to correctly spill imm

commit 811c363645b33e6e22658634329e95f383dfc705 upstream.

In check_stack_write_fixed_off(), imm value is cast to u32 before being
spilled to the stack. Therefore, the sign information is lost, and the
range information is incorrect when load from the stack again.

For the following prog:
0: r2 = r10
1: *(u64*)(r2 -40) = -44
2: r0 = *(u64*)(r2 - 40)
3: if r0 s<= 0xa goto +2
4: r0 = 1
5: exit
6: r0  = 0
7: exit

The verifier gives:
func#0 @0
0: R1=ctx(off=0,imm=0) R10=fp0
0: (bf) r2 = r10                      ; R2_w=fp0 R10=fp0
1: (7a) *(u64 *)(r2 -40) = -44        ; R2_w=fp0 fp-40_w=4294967252
2: (79) r0 = *(u64 *)(r2 -40)         ; R0_w=4294967252 R2_w=fp0
fp-40_w=4294967252
3: (c5) if r0 s< 0xa goto pc+2
mark_precise: frame0: last_idx 3 first_idx 0 subseq_idx -1
mark_precise: frame0: regs=r0 stack= before 2: (79) r0 = *(u64 *)(r2 -40)
3: R0_w=4294967252
4: (b7) r0 = 1                        ; R0_w=1
5: (95) exit
verification time 7971 usec
stack depth 40
processed 6 insns (limit 1000000) max_states_per_insn 0 total_states 0
peak_states 0 mark_read 0

So remove the incorrect cast, since imm field is declared as s32, and
__mark_reg_known() takes u64, so imm would be correctly sign extended
by compiler.

Fixes: ecdf985d7615 ("bpf: track immediate values written to stack by BPF_ST instruction")
Cc: stable@vger.kernel.org
Signed-off-by: Hao Sun <sunhao.th@gmail.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231101-fix-check-stack-write-v3-1-f05c2b1473d5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: Fix null dereference on suspend

commit bef4a48f4ef798c4feddf045d49e53c8a97d5e37 upstream.

A race condition exists where a synchronous (noqueue) transfer can be
active during a system suspend. This can cause a null pointer
dereference exception to occur when the system resumes.

Example order of events leading to the exception:
1. spi_sync() calls __spi_transfer_message_noqueue() which sets
   ctlr->cur_msg
2. Spi transfer begins via spi_transfer_one_message()
3. System is suspended interrupting the transfer context
4. System is resumed
6. spi_controller_resume() calls spi_start_queue() which resets cur_msg
   to NULL
7. Spi transfer context resumes and spi_finalize_current_message() is
   called which dereferences cur_msg (which is now NULL)

Wait for synchronous transfers to complete before suspending by
acquiring the bus mutex and setting/checking a suspend flag.

Signed-off-by: Mark Hasemeyer <markhas@chromium.org>
Link: https://lore.kernel.org/r/20231107144743.v1.1.I7987f05f61901f567f7661763646cb7d7919b528@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

randstruct: Fix gcc-plugin performance mode to stay in group

commit 381fdb73d1e2a48244de7260550e453d1003bb8e upstream.

The performance mode of the gcc-plugin randstruct was shuffling struct
members outside of the cache-line groups. Limit the range to the
specified group indexes.

Cc: linux-hardening@vger.kernel.org
Cc: stable@vger.kernel.org
Reported-by: Lukas Loidolt <e1634039@student.tuwien.ac.at>
Closes: https://lore.kernel.org/all/f3ca77f0-e414-4065-83a5-ae4c4d25545d@student.tuwien.ac.at
Fixes: 313dd1b62921 ("gcc-plugins: Add the randstruct plugin")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/perf: Fix disabling BHRB and instruction sampling

commit ea142e590aec55ba40c5affb4d49e68c713c63dc upstream.

When the PMU is disabled, MMCRA is not updated to disable BHRB and
instruction sampling. This can lead to those features remaining enabled,
which can slow down a real or emulated CPU.

Fixes: 1cade527f6e9 ("powerpc/perf: BHRB control to disable BHRB logic when not used")
Cc: stable@vger.kernel.org # v5.9+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231018153423.298373-1-npiggin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf intel-pt: Fix async branch flags

commit f2d87895cbc4af80649850dcf5da36de6b2ed3dd upstream.

Ensure PERF_IP_FLAG_ASYNC is set always for asynchronous branches (i.e.
interrupts etc).

Fixes: 90e457f7be08 ("perf tools: Add Intel PT support")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20230928072953.19369-1-adrian.hunter@intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: venus: hfi: add checks to perform sanity on queue pointers

commit 5e538fce33589da6d7cb2de1445b84d3a8a692f7 upstream.

Read and write pointers are used to track the packet index in the memory
shared between video driver and firmware. There is a possibility of OOB
access if the read or write pointer goes beyond the queue memory size.
Add checks for the read and write pointer to avoid OOB access.

Cc: stable@vger.kernel.org
Fixes: d96d3f30c0f2 ("[media] media: venus: hfi: add Venus HFI files")
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: perf: Check find_first_bit() return value

commit c6e316ac05532febb0c966fa9b55f5258ed037be upstream.

We must check the return value of find_first_bit() before using the
return value as an index array since it happens to overflow the array
and then panic:

[  107.318430] Kernel BUG [#1]
[  107.319434] CPU: 3 PID: 1238 Comm: kill Tainted: G            E      6.6.0-rc6ubuntu-defconfig #2
[  107.319465] Hardware name: riscv-virtio,qemu (DT)
[  107.319551] epc : pmu_sbi_ovf_handler+0x3a4/0x3ae
[  107.319840]  ra : pmu_sbi_ovf_handler+0x52/0x3ae
[  107.319868] epc : ffffffff80a0a77c ra : ffffffff80a0a42a sp : ffffaf83fecda350
[  107.319884]  gp : ffffffff823961a8 tp : ffffaf8083db1dc0 t0 : ffffaf83fecda480
[  107.319899]  t1 : ffffffff80cafe62 t2 : 000000000000ff00 s0 : ffffaf83fecda520
[  107.319921]  s1 : ffffaf83fecda380 a0 : 00000018fca29df0 a1 : ffffffffffffffff
[  107.319936]  a2 : 0000000001073734 a3 : 0000000000000004 a4 : 0000000000000000
[  107.319951]  a5 : 0000000000000040 a6 : 000000001d1c8774 a7 : 0000000000504d55
[  107.319965]  s2 : ffffffff82451f10 s3 : ffffffff82724e70 s4 : 000000000000003f
[  107.319980]  s5 : 0000000000000011 s6 : ffffaf8083db27c0 s7 : 0000000000000000
[  107.319995]  s8 : 0000000000000001 s9 : 00007fffb45d6558 s10: 00007fffb45d81a0
[  107.320009]  s11: ffffaf7ffff60000 t3 : 0000000000000004 t4 : 0000000000000000
[  107.320023]  t5 : ffffaf7f80000000 t6 : ffffaf8000000000
[  107.320037] status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003
[  107.320081] [<ffffffff80a0a77c>] pmu_sbi_ovf_handler+0x3a4/0x3ae
[  107.320112] [<ffffffff800b42d0>] handle_percpu_devid_irq+0x9e/0x1a0
[  107.320131] [<ffffffff800ad92c>] generic_handle_domain_irq+0x28/0x36
[  107.320148] [<ffffffff8065f9f8>] riscv_intc_irq+0x36/0x4e
[  107.320166] [<ffffffff80caf4a0>] handle_riscv_irq+0x54/0x86
[  107.320189] [<ffffffff80cb0036>] do_irq+0x64/0x96
[  107.320271] Code: 85a6 855e b097 ff7f 80e7 9220 b709 9002 4501 bbd9 (9002) 6097
[  107.320585] ---[ end trace 0000000000000000 ]---
[  107.320704] Kernel panic - not syncing: Fatal exception in interrupt
[  107.320775] SMP: stopping secondary CPUs
[  107.321219] Kernel Offset: 0x0 from 0xffffffff80000000
[  107.333051] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

Fixes: 4905ec2fb7e6 ("RISC-V: Add sscofpmf extension support")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20231109082128.40777-1-alexghiti@rivosinc.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf: arm_cspmu: Reject events meant for other PMUs

commit 15c7ef7341a2e54cfa12ac502c65d6fd2cce2b62 upstream.

Coresight PMU driver didn't reject events meant for other PMUs.
This caused some of the Core PMU events disappearing from
the output of "perf list". In addition, trying to run e.g.

     $ perf stat -e r2 sleep 1

made Coresight PMU driver to handle the event instead of letting
Core PMU driver to deal with it.

Cc: stable@vger.kernel.org
Fixes: e37dfd65731d ("perf: arm_cspmu: Add support for ARM CoreSight PMU driver")
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Besar Wicaksono <bwicaksono@nvidia.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20231103001654.35565-1-ilkka@os.amperecomputing.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i915/perf: Fix NULL deref bugs with drm_dbg() calls

commit 471aa951bf1206d3c10d0daa67005b8e4db4ff83 upstream.

When i915 perf interface is not available dereferencing it will lead to
NULL dereferences.

As returning -ENOTSUPP is pretty clear return when perf interface is not
available.

Fixes: 2fec539112e8 ("i915/perf: Replace DRM_DEBUG with driver specific drm_dbg call")
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v6.0+
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231027172822.2753059-1-harshit.m.mogalapalli@oracle.com
[tursulin: added stable tag]
(cherry picked from commit 36f27350ff745bd228ab04d7845dfbffc177a889)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/core: Fix cpuctx refcounting

commit 889c58b3155ff4c8e8671c95daef63d6fabbb6b1 upstream.

Audit of the refcounting turned up that perf_pmu_migrate_context()
fails to migrate the ctx refcount.

Fixes: bd2756811766 ("perf: Rewrite core context handling")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20230612093539.085862001@infradead.org
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: fix check of rc in function generate_smb3signingkey

[ Upstream commit 181724fc72486dec2bec8803459be05b5162aaa8 ]

Remove extra check after condition, add check after generating key
for encryption. The check is needed to return non zero rc before
rewriting it with generating key for decryption.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Fixes: d70e9fa55884 ("cifs: try opening channels after mounting")
Signed-off-by: Ekaterina Esina <eesina@astralinux.ru>
Co-developed-by: Anastasia Belova <abelova@astralinux.ru>
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: spnego: add ';' in HOST_KEY_LEN

[ Upstream commit ff31ba19d732efb9aca3633935d71085e68d5076 ]

"host=" should start with ';' (as in cifs_get_spnego_key)
So its length should be 6.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Fixes: 7c9c3760b3a5 ("[CIFS] add constants for string lengths of keynames in SPNEGO upcall string")
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Co-developed-by: Ekaterina Esina <eesina@astralinux.ru>
Signed-off-by: Ekaterina Esina <eesina@astralinux.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: core: Expand MCQ queue slot to DeviceQueueDepth + 1

[ Upstream commit defde5a50d91c74e1ce71a7f0bce7fb1ae311d84 ]

The UFSHCI 4.0 specification mandates that there should always be at least
one empty slot in each queue for distinguishing between full and empty
states. Enlarge 'hwq->max_entries' to 'DeviceQueueDepth + 1' to allow
UFSHCI 4.0 controllers to fully utilize MCQ queue slots.

Fixes: 4682abfae2eb ("scsi: ufs: core: mcq: Allocate memory for MCQ mode")
Signed-off-by: Naomi Chu <naomi.chu@mediatek.com>
Link: https://lore.kernel.org/r/20231102052426.12006-2-naomi.chu@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Chun-Hung <chun-hung.wu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools/power/turbostat: Enable the C-state Pre-wake printing

[ Upstream commit b61b7d8c4c22c4298a50ae5d0ee88facb85ce665 ]

Currently the C-state Pre-wake will not be printed due to the
probe has not been invoked. Invoke the probe function accordingly.

Fixes: aeb01e6d71ff ("tools/power turbostat: Print the C-state Pre-wake settings")
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools/power/turbostat: Fix a knl bug

[ Upstream commit 137f01b3529d292a68d22e9681e2f903c768f790 ]

MSR_KNL_CORE_C6_RESIDENCY should be evaluated only if
1. this is KNL platform
AND
2. need to get C6 residency or need to calculate C1 residency

Fix the broken logic introduced by commit 1e9042b9c8d4 ("tools/power
turbostat: Fix CPU%C1 display value").

Fixes: 1e9042b9c8d4 ("tools/power turbostat: Fix CPU%C1 display value")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

macvlan: Don't propagate promisc change to lower dev in passthru

[ Upstream commit 7e1caeace0418381f36b3aa8403dfd82fc57fc53 ]

Macvlan device in passthru mode sets its lower device promiscuous mode
according to its MACVLAN_FLAG_NOPROMISC flag instead of synchronizing it to
its own promiscuity setting. However, macvlan_change_rx_flags() function
doesn't check the mode before propagating such changes to the lower device
which can cause net_device->promiscuity counter overflow as illustrated by
reproduction example [0] and resulting dmesg log [1]. Fix the issue by
first verifying the mode in macvlan_change_rx_flags() function before
propagating promiscuous mode change to the lower device.

[0]:
ip link add macvlan1 link enp8s0f0 type macvlan mode passthru
ip link set macvlan1 promisc on
ip l set dev macvlan1 up
ip link set macvlan1 promisc off
ip l set dev macvlan1 down
ip l set dev macvlan1 up

[1]:
[ 5156.281724] macvlan1: entered promiscuous mode
[ 5156.285467] mlx5_core 0000:08:00.0 enp8s0f0: entered promiscuous mode
[ 5156.287639] macvlan1: left promiscuous mode
[ 5156.288339] mlx5_core 0000:08:00.0 enp8s0f0: left promiscuous mode
[ 5156.290907] mlx5_core 0000:08:00.0 enp8s0f0: entered promiscuous mode
[ 5156.317197] mlx5_core 0000:08:00.0 enp8s0f0: promiscuity touches roof, set promiscuity failed. promiscuity feature of device might be broken.

Fixes: efdbd2b30caa ("macvlan: Propagate promiscuity setting to lower devices.")
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231114175915.1649154-1-vladbu@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sched: do not offload flows with a helper in act_ct

[ Upstream commit 7cd5af0e937a197295f3aa3721031f0fbae49cff ]

There is no hardware supporting ct helper offload. However, prior to this
patch, a flower filter with a helper in the ct action can be successfully
set into the HW, for example (eth1 is a bnxt NIC):

  # tc qdisc add dev eth1 ingress_block 22 ingress
  # tc filter add block 22 proto ip flower skip_sw ip_proto tcp \
    dst_port 21 ct_state -trk action ct helper ipv4-tcp-ftp
  # tc filter show dev eth1 ingress

    filter block 22 protocol ip pref 49152 flower chain 0 handle 0x1
      eth_type ipv4
      ip_proto tcp
      dst_port 21
      ct_state -trk
      skip_sw
      in_hw in_hw_count 1   <----
        action order 1: ct zone 0 helper ipv4-tcp-ftp pipe
         index 2 ref 1 bind 1
        used_hw_stats delayed

This might cause the flower filter not to work as expected in the HW.

This patch avoids this problem by simply returning -EOPNOTSUPP in
tcf_ct_offload_act_setup() to not allow to offload flows with a helper
in act_ct.

Fixes: a21b06e73191 ("net: sched: add helper support in act_ct")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/f8685ec7702c4a448a1371a8b34b43217b583b9d.1699898008.git.lucien.xin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Check return value of snprintf writing to fw_version buffer for representors

[ Upstream commit 1b2bd0c0264febcd8d47209079a6671c38e6558b ]

Treat the operation as an error case when the return value is equivalent to
the size of the name buffer. Failed to write null terminator to the name
buffer, making the string malformed and should not be used. Provide a
string with only the firmware version when forming the string with the
board id fails. This logic for representors is identical to normal flow
with ethtool.

Without check, will trigger -Wformat-truncation with W=1.

    drivers/net/ethernet/mellanox/mlx5/core/en_rep.c: In function 'mlx5e_rep_get_drvinfo':
    drivers/net/ethernet/mellanox/mlx5/core/en_rep.c:78:31: warning: '%.16s' directive output may be truncated writing up to 16 bytes into a region of size between 13 and 22 [-Wformat-truncation=]
      78 |                  "%d.%d.%04d (%.16s)",
         |                               ^~~~~
    drivers/net/ethernet/mellanox/mlx5/core/en_rep.c:77:9: note: 'snprintf' output between 12 and 37 bytes into a destination of size 32
      77 |         snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version),
         |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      78 |                  "%d.%d.%04d (%.16s)",
         |                  ~~~~~~~~~~~~~~~~~~~~~
      79 |                  fw_rev_maj(mdev), fw_rev_min(mdev),
         |                  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      80 |                  fw_rev_sub(mdev), mdev->board_id);
         |                  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fixes: cf83c8fdcd47 ("net/mlx5e: Add missing ethtool driver info for representors")
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6d4ab2e97dcfbcd748ae71761a9d8e5e41cc732c
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-16-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Check return value of snprintf writing to fw_version buffer

[ Upstream commit 41e63c2baa11dc2aa71df5dd27a5bd87d11b6bbb ]

Treat the operation as an error case when the return value is equivalent to
the size of the name buffer. Failed to write null terminator to the name
buffer, making the string malformed and should not be used. Provide a
string with only the firmware version when forming the string with the
board id fails.

Without check, will trigger -Wformat-truncation with W=1.

    drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c: In function 'mlx5e_ethtool_get_drvinfo':
    drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:49:31: warning: '%.16s' directive output may be truncated writing up to 16 bytes into a region of size between 13 and 22 [-Wformat-truncation=]
      49 |                  "%d.%d.%04d (%.16s)",
         |                               ^~~~~
    drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:48:9: note: 'snprintf' output between 12 and 37 bytes into a destination of size 32
      48 |         snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version),
         |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      49 |                  "%d.%d.%04d (%.16s)",
         |                  ~~~~~~~~~~~~~~~~~~~~~
      50 |                  fw_rev_maj(mdev), fw_rev_min(mdev), fw_rev_sub(mdev),
         |                  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      51 |                  mdev->board_id);
         |                  ~~~~~~~~~~~~~~~

Fixes: 84e11edb71de ("net/mlx5e: Show board id in ethtool driver information")
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6d4ab2e97dcfbcd748ae71761a9d8e5e41cc732c
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Reduce the size of icosq_str

[ Upstream commit dce94142842e119b982c27c1b62bd20890c7fd21 ]

icosq_str size is unnecessarily too long, and it causes a build warning
-Wformat-truncation with W=1. Looking closely, It doesn't need to be 255B,
hence this patch reduces the size to 32B which should be more than enough
to host the string: "ICOSQ: 0x%x, ".

While here, add a missing space in the formatted string.

This fixes the following build warning:

$ KCFLAGS='-Wall -Werror'
$ make O=/tmp/kbuild/linux W=1 -s -j12 drivers/net/ethernet/mellanox/mlx5/core/

drivers/net/ethernet/mellanox/mlx5/core/en/reporter_rx.c: In function 'mlx5e_reporter_rx_timeout':
drivers/net/ethernet/mellanox/mlx5/core/en/reporter_rx.c:718:56:
error: ', CQ: 0x' directive output may be truncated writing 8 bytes into a region of size between 0 and 255 [-Werror=format-truncation=]
  718 |                  "RX timeout on channel: %d, %sRQ: 0x%x, CQ: 0x%x",
      |                                                        ^~~~~~~~
drivers/net/ethernet/mellanox/mlx5/core/en/reporter_rx.c:717:9: note: 'snprintf' output between 43 and 322 bytes into a destination of size 288
  717 |         snprintf(err_str, sizeof(err_str),
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  718 |                  "RX timeout on channel: %d, %sRQ: 0x%x, CQ: 0x%x",
      |                  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  719 |                  rq->ix, icosq_str, rq->rqn, rq->cq.mcq.cqn);
      |                  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fixes: 521f31af004a ("net/mlx5e: Allow RQ outside of channel context")
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6d4ab2e97dcfbcd748ae71761a9d8e5e41cc732c
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-14-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Increase size of irq name buffer

[ Upstream commit 3338bebfc26a1e2cebbba82a1cf12c0159608e73 ]

Without increased buffer size, will trigger -Wformat-truncation with W=1
for the snprintf operation writing to the buffer.

    drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c: In function 'mlx5_irq_alloc':
    drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c:296:7: error: '@pci:' directive output may be truncated writing 5 bytes into a region of size between 1 and 32 [-Werror=format-truncation=]
      296 |    "%s@pci:%s", name, pci_name(dev->pdev));
          |       ^~~~~
    drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c:295:2: note: 'snprintf' output 6 or more bytes (assuming 37) into a destination of size 32
      295 |  snprintf(irq->name, MLX5_MAX_IRQ_NAME,
          |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      296 |    "%s@pci:%s", name, pci_name(dev->pdev));
          |    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fixes: ada9f5d00797 ("IB/mlx5: Fix eq names to display nicely in /proc/interrupts")
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6d4ab2e97dcfbcd748ae71761a9d8e5e41cc732c
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-13-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Update doorbell for port timestamping CQ before the software counter

[ Upstream commit 92214be5979c0961a471b7eaaaeacab41bdf456c ]

Previously, mlx5e_ptp_poll_ts_cq would update the device doorbell with the
incremented consumer index after the relevant software counters in the
kernel were updated. In the mlx5e_sq_xmit_wqe context, this would lead to
either overrunning the device CQ or exceeding the expected software buffer
size in the device CQ if the device CQ size was greater than the software
buffer size. Update the relevant software counter only after updating the
device CQ consumer index in the port timestamping napi_poll context.

Log:
    mlx5_core 0000:08:00.0: cq_err_event_notifier:517:(pid 0): CQ error on CQN 0x487, syndrome 0x1
    mlx5_core 0000:08:00.0 eth2: mlx5e_cq_error_event: cqn=0x000487 event=0x04

Fixes: 1880bc4e4a96 ("net/mlx5e: Add TX port timestamp support")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-12-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Track xmit submission to PTP WQ after populating metadata map

[ Upstream commit 7e3f3ba97e6cc6fce5bf62df2ca06c8e59040167 ]

Ensure the skb is available in metadata mapping to skbs before tracking the
metadata index for detecting undelivered CQEs. If the metadata index is put
in the tracking list before putting the skb in the map, the metadata index
might be used for detecting undelivered CQEs before the relevant skb is
available in the map, which can lead to a null-ptr-deref.

Log:
    general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] SMP KASAN
    KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
    CPU: 0 PID: 1243 Comm: kworker/0:2 Not tainted 6.6.0-rc4+ #108
    Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
    Workqueue: events mlx5e_rx_dim_work [mlx5_core]
    RIP: 0010:mlx5e_ptp_napi_poll+0x9a4/0x2290 [mlx5_core]
    Code: 8c 24 38 cc ff ff 4c 8d 3c c1 4c 89 f9 48 c1 e9 03 42 80 3c 31 00 0f 85 97 0f 00 00 4d 8b 3f 49 8d 7f 28 48 89 f9 48 c1 e9 03 <42> 80 3c 31 00 0f 85 8b 0f 00 00 49 8b 47 28 48 85 c0 0f 84 05 07
    RSP: 0018:ffff8884d3c09c88 EFLAGS: 00010206
    RAX: 0000000000000069 RBX: ffff8881160349d8 RCX: 0000000000000005
    RDX: ffffed10218f48cf RSI: 0000000000000004 RDI: 0000000000000028
    RBP: ffff888122707700 R08: 0000000000000001 R09: ffffed109a781383
    R10: 0000000000000003 R11: 0000000000000003 R12: ffff88810c7a7a40
    R13: ffff888122707700 R14: dffffc0000000000 R15: 0000000000000000
    FS:  0000000000000000(0000) GS:ffff8884d3c00000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 00007f4f878dd6e0 CR3: 000000014d108002 CR4: 0000000000370eb0
    DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
    Call Trace:
    <IRQ>
    ? die_addr+0x3c/0xa0
    ? exc_general_protection+0x144/0x210
    ? asm_exc_general_protection+0x22/0x30
    ? mlx5e_ptp_napi_poll+0x9a4/0x2290 [mlx5_core]
    ? mlx5e_ptp_napi_poll+0x8f6/0x2290 [mlx5_core]
    __napi_poll.constprop.0+0xa4/0x580
    net_rx_action+0x460/0xb80
    ? _raw_spin_unlock_irqrestore+0x32/0x60
    ? __napi_poll.constprop.0+0x580/0x580
    ? tasklet_action_common.isra.0+0x2ef/0x760
    __do_softirq+0x26c/0x827
    irq_exit_rcu+0xc2/0x100
    common_interrupt+0x7f/0xa0
    </IRQ>
    <TASK>
    asm_common_interrupt+0x22/0x40
    RIP: 0010:__kmem_cache_alloc_node+0xb/0x330
    Code: 41 5d 41 5e 41 5f c3 8b 44 24 14 8b 4c 24 10 09 c8 eb d5 e8 b7 43 ca 01 0f 1f 80 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 57 <41> 56 41 89 d6 41 55 41 89 f5 41 54 49 89 fc 53 48 83 e4 f0 48 83
    RSP: 0018:ffff88812c4079c0 EFLAGS: 00000246
    RAX: 1ffffffff083c7fe RBX: ffff888100042dc0 RCX: 0000000000000218
    RDX: 00000000ffffffff RSI: 0000000000000dc0 RDI: ffff888100042dc0
    RBP: ffff88812c4079c8 R08: ffffffffa0289f96 R09: ffffed1025880ea9
    R10: ffff888138839f80 R11: 0000000000000002 R12: 0000000000000dc0
    R13: 0000000000000100 R14: 000000000000008c R15: ffff8881271fc450
    ? cmd_exec+0x796/0x2200 [mlx5_core]
    kmalloc_trace+0x26/0xc0
    cmd_exec+0x796/0x2200 [mlx5_core]
    mlx5_cmd_do+0x22/0xc0 [mlx5_core]
    mlx5_cmd_exec+0x17/0x30 [mlx5_core]
    mlx5_core_modify_cq_moderation+0x139/0x1b0 [mlx5_core]
    ? mlx5_add_cq_to_tasklet+0x280/0x280 [mlx5_core]
    ? lockdep_set_lock_cmp_fn+0x190/0x190
    ? process_one_work+0x659/0x1220
    mlx5e_rx_dim_work+0x9d/0x100 [mlx5_core]
    process_one_work+0x730/0x1220
    ? lockdep_hardirqs_on_prepare+0x400/0x400
    ? max_active_store+0xf0/0xf0
    ? assign_work+0x168/0x240
    worker_thread+0x70f/0x12d0
    ? __kthread_parkme+0xd1/0x1d0
    ? process_one_work+0x1220/0x1220
    kthread+0x2d9/0x3b0
    ? kthread_complete_and_exit+0x20/0x20
    ret_from_fork+0x2d/0x70
    ? kthread_complete_and_exit+0x20/0x20
    ret_from_fork_asm+0x11/0x20
    </TASK>
    Modules linked in: xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay mlx5_ib ib_uverbs ib_core zram zsmalloc mlx5_core fuse
    ---[ end trace 0000000000000000 ]---

Fixes: 3178308ad4ca ("net/mlx5e: Make tx_port_ts logic resilient to out-of-order CQEs")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-11-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Avoid referencing skb after free-ing in drop path of mlx5e_sq_xmit_wqe

[ Upstream commit 64f14d16eef1f939000f2617b50c7c996b5117d4 ]

When SQ is a port timestamping SQ for PTP, do not access tx flags of skb
after free-ing the skb. Free the skb only after all references that depend
on it have been handled in the dropped WQE path.

Fixes: 3178308ad4ca ("net/mlx5e: Make tx_port_ts logic resilient to out-of-order CQEs")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-10-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Don't modify the peer sent-to-vport rules for IPSec offload

[ Upstream commit bdf788cf224f61c20a01c58c00685d394d57887f ]

As IPSec packet offload in switchdev mode is not supported with LAG,
it's unnecessary to modify those sent-to-vport rules to the peer eswitch.

Fixes: c6c2bf5db4ea ("net/mlx5e: Support IPsec packet offload for TX in switchdev mode")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-9-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Fix pedit endianness

[ Upstream commit 0c101a23ca7eaf00eef1328eefb04b3a93401cc8 ]

Referenced commit addressed endianness issue in mlx5 pedit implementation
in ad hoc manner instead of systematically treating integer values
according to their types which left pedit fields of sizes not equal to 4
and where the bytes being modified are not least significant ones broken on
big endian machines since wrong bits will be consumed during parsing which
leads to following example error when applying pedit to source and
destination MAC addresses:

[Wed Oct 18 12:52:42 2023] mlx5_core 0001:00:00.1 p1v3_r: attempt to offload an unsupported field (cmd 0)
[Wed Oct 18 12:52:42 2023] mask: 00000000330c5b68: 00 00 00 00 ff ff 00 00 00 00 ff ff 00 00 00 00  ................
[Wed Oct 18 12:52:42 2023] mask: 0000000017d22fd9: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[Wed Oct 18 12:52:42 2023] mask: 000000008186d717: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[Wed Oct 18 12:52:42 2023] mask: 0000000029eb6149: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[Wed Oct 18 12:52:42 2023] mask: 000000007ed103e4: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[Wed Oct 18 12:52:42 2023] mask: 00000000db8101a6: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[Wed Oct 18 12:52:42 2023] mask: 00000000ec3c08a9: 00 00 00 00 00 00 00 00 00 00 00 00              ............

Treat masks and values of pedit and filter match as network byte order,
refactor pointers to them to void pointers instead of confusing u32
pointers and only cast to pointer-to-integer when reading a value from
them. Treat pedit mlx5_fields->field_mask as host byte order according to
its type u32, change the constants in fields array accordingly.

Fixes: 82198d8bcdef ("net/mlx5e: Fix endianness when calculating pedit mask first bit")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-8-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: fix double free of encap_header in update funcs

[ Upstream commit 3a4aa3cb83563df942be49d145ee3b7ddf17d6bb ]

Follow up to the previous patch to fix the same issue for
mlx5e_tc_tun_update_header_ipv4{6} when mlx5_packet_reformat_alloc()
fails.

When mlx5_packet_reformat_alloc() fails, the encap_header allocated in
mlx5e_tc_tun_update_header_ipv4{6} will be released within it. However,
e->encap_header is already set to the previously freed encap_header
before mlx5_packet_reformat_alloc(). As a result, the later
mlx5e_encap_put() will free e->encap_header again, causing a double free
issue.

mlx5e_encap_put()
     --> mlx5e_encap_dealloc()
         --> kfree(e->encap_header)

This patch fix it by not setting e->encap_header until
mlx5_packet_reformat_alloc() success.

Fixes: a54e20b4fcae ("net/mlx5e: Add basic TC tunnel set action for SRIOV offloads")
Signed-off-by: Gavin Li <gavinl@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-7-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: fix double free of encap_header

[ Upstream commit 6f9b1a0731662648949a1c0587f6acb3b7f8acf1 ]

When mlx5_packet_reformat_alloc() fails, the encap_header allocated in
mlx5e_tc_tun_create_header_ipv4{6} will be released within it. However,
e->encap_header is already set to the previously freed encap_header
before mlx5_packet_reformat_alloc(). As a result, the later
mlx5e_encap_put() will free e->encap_header again, causing a double free
issue.

mlx5e_encap_put()
    --> mlx5e_encap_dealloc()
        --> kfree(e->encap_header)

This happens when cmd: MLX5_CMD_OP_ALLOC_PACKET_REFORMAT_CONTEXT fail.

This patch fix it by not setting e->encap_header until
mlx5_packet_reformat_alloc() success.

Fixes: d589e785baf5e ("net/mlx5e: Allow concurrent creation of encap entries")
Reported-by: Cruz Zhao <cruzzhao@linux.alibaba.com>
Reported-by: Tianchen Ding <dtcccc@linux.alibaba.com>
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Decouple PHC .adjtime and .adjphase implementations

[ Upstream commit fd64fd13c49a53012ce9170449dcd9eb71c11284 ]

When running a phase adjustment operation, the free running clock should
not be modified at all. The phase control keyword is intended to trigger an
internal servo on the device that will converge to the provided delta. A
free running counter cannot implement phase adjustment.

Fixes: 8e11a68e2e8a ("net/mlx5: Add adjphase function to support hardware-only offset control")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-5-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Free used cpus mask when an IRQ is released

[ Upstream commit 7d2f74d1d4385a5bcf90618537f16a45121c30ae ]

Each EQ table maintains a cpumask of the already used CPUs that are mapped
to IRQs to ensure that each IRQ gets mapped to a unique CPU.

However, on IRQ release, the said cpumask is not updated by clearing the
CPU from the mask to allow future IRQ request, causing the following
error when a SF is reloaded after it has utilized all CPUs for its IRQs:

mlx5_irq_affinity_request:135:(pid 306010): Didn't find a matching IRQ.
err = -28

Thus, when releasing an IRQ, clear its mapped CPU from the used CPUs
mask, to prevent the case described above.

While at it, move the used cpumask update to the EQ layer as it is more
fitting and preserves symmetricity of the IRQ request/release API.

Fixes: a1772de78d73 ("net/mlx5: Refactor completion IRQ request/release API")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-3-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "net/mlx5: DR, Supporting inline WQE when possible"

[ Upstream commit df3aafe501853c92bc9e25b05dcb030fee072962 ]

This reverts commit 95c337cce0e11d06a715da73e6796ade9216637f.
The revert is required due to the suspicion it cause some tests
fail and will be moved to further investigation.

Fixes: 95c337cce0e1 ("net/mlx5: DR, Supporting inline WQE when possible")
Signed-off-by: Itamar Gozlan <igozlan@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-2-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring/fdinfo: remove need for sqpoll lock for thread/pid retrieval

[ Upstream commit a0d45c3f596be53c1bd8822a1984532d14fdcea9 ]

A previous commit added a trylock for getting the SQPOLL thread info via
fdinfo, but this introduced a regression where we often fail to get it if
the thread is busy. For that case, we end up not printing the current CPU
and PID info.

Rather than rely on this lock, just print the pid we already stored in
the io_sq_data struct, and ensure we update the current CPU every time
we've slept or potentially rescheduled. The latter won't potentially be
100% accurate, but that wasn't the case before either as the task can
get migrated at any time unless it has been pinned at creation time.

We retain keeping the io_sq_data dereference inside the ctx->uring_lock,
as it has always been, as destruction of the thread and data happen below
that. We could make this RCU safe, but there's little point in doing that.

With this, we always print the last valid information we had, rather than
have spurious outputs with missing information.

Fixes: 7644b1a1c9a7 ("io_uring/fdinfo: lock SQ thread while retrieving thread cpu/pid")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gve: Fixes for napi_poll when budget is 0

[ Upstream commit 278a370c1766060d2144d6cf0b06c101e1043b6d ]

Netpoll will explicilty pass the polling call with a budget of 0 to
indicate it's clearing the Tx path only. For the gve_rx_poll and
gve_xdp_poll, they were mistakenly taking the 0 budget as the indication
to do all the work. Add check to avoid the rx path and xdp path being
called when budget is 0. And also avoid napi_complete_done being called
when budget is 0 for netpoll.

Fixes: f5cedc84a30d ("gve: Add transmit and receive support")
Signed-off-by: Ziwei Xiao <ziweixiao@google.com>
Link: https://lore.kernel.org/r/20231114004144.2022268-1-ziweixiao@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pds_core: fix up some format-truncation complaints

[ Upstream commit 7c02f6ae676a954216a192612040f9a0cde3adf7 ]

Our friendly kernel test robot pointed out a couple of potential
string truncation issues.  None of which were we worried about,
but can be relatively easily fixed to quiet the complaints.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310211736.66syyDpp-lkp@intel.com/
Fixes: 45d76f492938 ("pds_core: set up device and adminq")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20231113183257.71110-3-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pds_core: use correct index to mask irq

[ Upstream commit 09d4c14c6c5e6e781a3879fed7f8e116a18b8c65 ]

Use the qcq's interrupt index, not the irq number, to mask
the interrupt.  Since the irq number can be out of range from
the number of possible interrupts, we can end up accessing
and potentially scribbling on out-of-range and/or unmapped
memory, making the kernel angry.

    [ 3116.039364] BUG: unable to handle page fault for address: ffffbeea1c3edf84
    [ 3116.047059] #PF: supervisor write access in kernel mode
    [ 3116.052895] #PF: error_code(0x0002) - not-present page
    [ 3116.058636] PGD 100000067 P4D 100000067 PUD 1001f2067 PMD 10f82e067 PTE 0
    [ 3116.066221] Oops: 0002 [#1] SMP NOPTI
    [ 3116.092948] RIP: 0010:iowrite32+0x9/0x76
    [ 3116.190452] Call Trace:
    [ 3116.193185]  <IRQ>
    [ 3116.195430]  ? show_trace_log_lvl+0x1d6/0x2f9
    [ 3116.200298]  ? show_trace_log_lvl+0x1d6/0x2f9
    [ 3116.205166]  ? pdsc_adminq_isr+0x43/0x55 [pds_core]
    [ 3116.210618]  ? __die_body.cold+0x8/0xa
    [ 3116.214806]  ? page_fault_oops+0x16d/0x1ac
    [ 3116.219382]  ? exc_page_fault+0xbe/0x13b
    [ 3116.223764]  ? asm_exc_page_fault+0x22/0x27
    [ 3116.228440]  ? iowrite32+0x9/0x76
    [ 3116.232143]  pdsc_adminq_isr+0x43/0x55 [pds_core]
    [ 3116.237627]  __handle_irq_event_percpu+0x3a/0x184
    [ 3116.243088]  handle_irq_event+0x57/0xb0
    [ 3116.247575]  handle_edge_irq+0x87/0x225
    [ 3116.252062]  __common_interrupt+0x3e/0xbc
    [ 3116.256740]  common_interrupt+0x7b/0x98
    [ 3116.261216]  </IRQ>
    [ 3116.263745]  <TASK>
    [ 3116.266268]  asm_common_interrupt+0x22/0x27

Reported-by: Joao Martins <joao.m.martins@oracle.com>
Fixes: 01ba61b55b20 ("pds_core: Add adminq processing and commands")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20231113183257.71110-2-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: avoid rx queue overrun

[ Upstream commit b6cb4541853c7ee512111b0e7ddf3cb66c99c137 ]

dma_rx_size can be set as low as 64. Rx budget might be higher than
that. Make sure to not overrun allocated rx buffers when budget is
larger.

Leave one descriptor unused to avoid wrap around of 'dirty_rx' vs
'cur_rx'.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Fixes: 47dd7a540b8a ("net: add support for STMicroelectronics Ethernet controllers.")
Link: https://lore.kernel.org/r/d95413e44c97d4692e72cec13a75f894abeb6998.1699897370.git.baruch@tkos.co.il
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: fix rx budget limit check

[ Upstream commit fa02de9e75889915b554eda1964a631fd019973b ]

The while loop condition verifies 'count < limit'. Neither value change
before the 'count >= limit' check. As is this check is dead code. But
code inspection reveals a code path that modifies 'count' and then goto
'drain_data' and back to 'read_again'. So there is a need to verify
count value sanity after 'read_again'.

Move 'read_again' up to fix the count limit check.

Fixes: ec222003bd94 ("net: stmmac: Prepare to add Split Header support")
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/d9486296c3b6b12ab3a0515fcd47d56447a07bfc.1699897370.git.baruch@tkos.co.il
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: bogus ENOENT when destroying element which does not exist

[ Upstream commit a7d5a955bfa854ac6b0c53aaf933394b4e6139e4 ]

destroy element command bogusly reports ENOENT in case a set element
does not exist. ENOENT errors are skipped, however, err is still set
and propagated to userspace.

 # nft destroy element ip raw BLACKLIST { 1.2.3.4 }
 Error: Could not process rule: No such file or directory
 destroy element ip raw BLACKLIST { 1.2.3.4 }
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Fixes: f80a612dd77c ("netfilter: nf_tables: add support to destroy operation")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: fix pointer math issue in nft_byteorder_eval()

[ Upstream commit c301f0981fdd3fd1ffac6836b423c4d7a8e0eb63 ]

The problem is in nft_byteorder_eval() where we are iterating through a
loop and writing to dst[0], dst[1], dst[2] and so on...  On each
iteration we are writing 8 bytes.  But dst[] is an array of u32 so each
element only has space for 4 bytes.  That means that every iteration
overwrites part of the previous element.

I spotted this bug while reviewing commit caf3ef7468f7 ("netfilter:
nf_tables: prevent OOB access in nft_byteorder_eval") which is a related
issue.  I think that the reason we have not detected this bug in testing
is that most of time we only write one element.

Fixes: ce1e7989d989 ("netfilter: nft_byteorder: provide 64bit le/be conversion")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_conntrack_bridge: initialize err to 0

[ Upstream commit a44af08e3d4d7566eeea98d7a29fe06e7b9de944 ]

K2CI reported a problem:

consume_skb(skb);
return err;
[nf_br_ip_fragment() error]  uninitialized symbol 'err'.

err is not initialized, because returning 0 is expected, initialize err
to 0.

Fixes: 3c171f496ef5 ("netfilter: bridge: add connection tracking system")
Reported-by: k2ci <kernel-bot@kylinos.cn>
Signed-off-by: Linkui Xiao <xiaolinkui@kylinos.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

af_unix: fix use-after-free in unix_stream_read_actor()

[ Upstream commit 4b7b492615cf3017190f55444f7016812b66611d ]

syzbot reported the following crash [1]

After releasing unix socket lock, u->oob_skb can be changed
by another thread. We must temporarily increase skb refcount
to make sure this other thread will not free the skb under us.

[1]

BUG: KASAN: slab-use-after-free in unix_stream_read_actor+0xa7/0xc0 net/unix/af_unix.c:2866
Read of size 4 at addr ffff88801f3b9cc4 by task syz-executor107/5297

CPU: 1 PID: 5297 Comm: syz-executor107 Not tainted 6.6.0-syzkaller-15910-gb8e3a87a627b #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd9/0x1b0 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:364 [inline]
print_report+0xc4/0x620 mm/kasan/report.c:475
kasan_report+0xda/0x110 mm/kasan/report.c:588
unix_stream_read_actor+0xa7/0xc0 net/unix/af_unix.c:2866
unix_stream_recv_urg net/unix/af_unix.c:2587 [inline]
unix_stream_read_generic+0x19a5/0x2480 net/unix/af_unix.c:2666
unix_stream_recvmsg+0x189/0x1b0 net/unix/af_unix.c:2903
sock_recvmsg_nosec net/socket.c:1044 [inline]
sock_recvmsg+0xe2/0x170 net/socket.c:1066
____sys_recvmsg+0x21f/0x5c0 net/socket.c:2803
___sys_recvmsg+0x115/0x1a0 net/socket.c:2845
__sys_recvmsg+0x114/0x1e0 net/socket.c:2875
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b
RIP: 0033:0x7fc67492c559
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fc6748ab228 EFLAGS: 00000246 ORIG_RAX: 000000000000002f
RAX: ffffffffffffffda RBX: 000000000000001c RCX: 00007fc67492c559
RDX: 0000000040010083 RSI: 0000000020000140 RDI: 0000000000000004
RBP: 00007fc6749b6348 R08: 00007fc6748ab6c0 R09: 00007fc6748ab6c0
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fc6749b6340
R13: 00007fc6749b634c R14: 00007ffe9fac52a0 R15: 00007ffe9fac5388
</TASK>

Allocated by task 5295:
kasan_save_stack+0x33/0x50 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
__kasan_slab_alloc+0x81/0x90 mm/kasan/common.c:328
kasan_slab_alloc include/linux/kasan.h:188 [inline]
slab_post_alloc_hook mm/slab.h:763 [inline]
slab_alloc_node mm/slub.c:3478 [inline]
kmem_cache_alloc_node+0x180/0x3c0 mm/slub.c:3523
__alloc_skb+0x287/0x330 net/core/skbuff.c:641
alloc_skb include/linux/skbuff.h:1286 [inline]
alloc_skb_with_frags+0xe4/0x710 net/core/skbuff.c:6331
sock_alloc_send_pskb+0x7e4/0x970 net/core/sock.c:2780
sock_alloc_send_skb include/net/sock.h:1884 [inline]
queue_oob net/unix/af_unix.c:2147 [inline]
unix_stream_sendmsg+0xb5f/0x10a0 net/unix/af_unix.c:2301
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
____sys_sendmsg+0x6ac/0x940 net/socket.c:2584
___sys_sendmsg+0x135/0x1d0 net/socket.c:2638
__sys_sendmsg+0x117/0x1e0 net/socket.c:2667
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b

Freed by task 5295:
kasan_save_stack+0x33/0x50 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
kasan_save_free_info+0x2b/0x40 mm/kasan/generic.c:522
____kasan_slab_free mm/kasan/common.c:236 [inline]
____kasan_slab_free+0x15b/0x1b0 mm/kasan/common.c:200
kasan_slab_free include/linux/kasan.h:164 [inline]
slab_free_hook mm/slub.c:1800 [inline]
slab_free_freelist_hook+0x114/0x1e0 mm/slub.c:1826
slab_free mm/slub.c:3809 [inline]
kmem_cache_free+0xf8/0x340 mm/slub.c:3831
kfree_skbmem+0xef/0x1b0 net/core/skbuff.c:1015
__kfree_skb net/core/skbuff.c:1073 [inline]
consume_skb net/core/skbuff.c:1288 [inline]
consume_skb+0xdf/0x170 net/core/skbuff.c:1282
queue_oob net/unix/af_unix.c:2178 [inline]
unix_stream_sendmsg+0xd49/0x10a0 net/unix/af_unix.c:2301
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
____sys_sendmsg+0x6ac/0x940 net/socket.c:2584
___sys_sendmsg+0x135/0x1d0 net/socket.c:2638
__sys_sendmsg+0x117/0x1e0 net/socket.c:2667
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b

The buggy address belongs to the object at ffff88801f3b9c80
which belongs to the cache skbuff_head_cache of size 240
The buggy address is located 68 bytes inside of
freed 240-byte region [ffff88801f3b9c80, ffff88801f3b9d70)

The buggy address belongs to the physical page:
page:ffffea00007cee40 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1f3b9
flags: 0xfff00000000800(slab|node=0|zone=1|lastcpupid=0x7ff)
page_type: 0xffffffff()
raw: 00fff00000000800 ffff888142a60640 dead000000000122 0000000000000000
raw: 0000000000000000 00000000000c000c 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 0, migratetype Unmovable, gfp_mask 0x12cc0(GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY), pid 5299, tgid 5283 (syz-executor107), ts 103803840339, free_ts 103600093431
set_page_owner include/linux/page_owner.h:31 [inline]
post_alloc_hook+0x2cf/0x340 mm/page_alloc.c:1537
prep_new_page mm/page_alloc.c:1544 [inline]
get_page_from_freelist+0xa25/0x36c0 mm/page_alloc.c:3312
__alloc_pages+0x1d0/0x4a0 mm/page_alloc.c:4568
alloc_pages_mpol+0x258/0x5f0 mm/mempolicy.c:2133
alloc_slab_page mm/slub.c:1870 [inline]
allocate_slab+0x251/0x380 mm/slub.c:2017
new_slab mm/slub.c:2070 [inline]
___slab_alloc+0x8c7/0x1580 mm/slub.c:3223
__slab_alloc.constprop.0+0x56/0xa0 mm/slub.c:3322
__slab_alloc_node mm/slub.c:3375 [inline]
slab_alloc_node mm/slub.c:3468 [inline]
kmem_cache_alloc_node+0x132/0x3c0 mm/slub.c:3523
__alloc_skb+0x287/0x330 net/core/skbuff.c:641
alloc_skb include/linux/skbuff.h:1286 [inline]
alloc_skb_with_frags+0xe4/0x710 net/core/skbuff.c:6331
sock_alloc_send_pskb+0x7e4/0x970 net/core/sock.c:2780
sock_alloc_send_skb include/net/sock.h:1884 [inline]
queue_oob net/unix/af_unix.c:2147 [inline]
unix_stream_sendmsg+0xb5f/0x10a0 net/unix/af_unix.c:2301
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
____sys_sendmsg+0x6ac/0x940 net/socket.c:2584
___sys_sendmsg+0x135/0x1d0 net/socket.c:2638
__sys_sendmsg+0x117/0x1e0 net/socket.c:2667
page last free stack trace:
reset_page_owner include/linux/page_owner.h:24 [inline]
free_pages_prepare mm/page_alloc.c:1137 [inline]
free_unref_page_prepare+0x4f8/0xa90 mm/page_alloc.c:2347
free_unref_page+0x33/0x3b0 mm/page_alloc.c:2487
__unfreeze_partials+0x21d/0x240 mm/slub.c:2655
qlink_free mm/kasan/quarantine.c:168 [inline]
qlist_free_all+0x6a/0x170 mm/kasan/quarantine.c:187
kasan_quarantine_reduce+0x18e/0x1d0 mm/kasan/quarantine.c:294
__kasan_slab_alloc+0x65/0x90 mm/kasan/common.c:305
kasan_slab_alloc include/linux/kasan.h:188 [inline]
slab_post_alloc_hook mm/slab.h:763 [inline]
slab_alloc_node mm/slub.c:3478 [inline]
slab_alloc mm/slub.c:3486 [inline]
__kmem_cache_alloc_lru mm/slub.c:3493 [inline]
kmem_cache_alloc+0x15d/0x380 mm/slub.c:3502
vm_area_dup+0x21/0x2f0 kernel/fork.c:500
__split_vma+0x17d/0x1070 mm/mmap.c:2365
split_vma mm/mmap.c:2437 [inline]
vma_modify+0x25d/0x450 mm/mmap.c:2472
vma_modify_flags include/linux/mm.h:3271 [inline]
mprotect_fixup+0x228/0xc80 mm/mprotect.c:635
do_mprotect_pkey+0x852/0xd60 mm/mprotect.c:809
__do_sys_mprotect mm/mprotect.c:830 [inline]
__se_sys_mprotect mm/mprotect.c:827 [inline]
__x64_sys_mprotect+0x78/0xb0 mm/mprotect.c:827
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b

Memory state around the buggy address:
ffff88801f3b9b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88801f3b9c00: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc
>ffff88801f3b9c80: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88801f3b9d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc
ffff88801f3b9d80: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb

Fixes: 876c14ad014d ("af_unix: fix holding spinlock in oob handling")
Reported-and-tested-by: syzbot+7a2d546fa43e49315ed3@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Rao Shoaib <rao.shoaib@oracle.com>
Reviewed-by: Rao shoaib <rao.shoaib@oracle.com>
Link: https://lore.kernel.org/r/20231113134938.168151-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: cortina: Fix MTU max setting

[ Upstream commit dc6c0bfbaa947dd7976e30e8c29b10c868b6fa42 ]

The RX max frame size is over 10000 for the Gemini ethernet,
but the TX max frame size is actually just 2047 (0x7ff after
checking the datasheet). Reflect this in what we offer to Linux,
cap the MTU at the TX max frame minus ethernet headers.

We delete the code disabling the hardware checksum for large
MTUs as netdev->mtu can no longer be larger than
netdev->max_mtu meaning the if()-clause in gmac_fix_features()
is never true.

Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20231109-gemini-largeframe-fix-v4-3-6e611528db08@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: cortina: Handle large frames

[ Upstream commit d4d0c5b4d279bfe3585fbd806efefd3e51c82afa ]

The Gemini ethernet controller provides hardware checksumming
for frames up to 1514 bytes including ethernet headers but not
FCS.

If we start sending bigger frames (after first bumping up the MTU
on both interfaces sending and receiving the frames), truncated
packets start to appear on the target such as in this tcpdump
resulting from ping -s 1474:

23:34:17.241983 14:d6:4d:a8:3c:4f (oui Unknown) > bc:ae:c5:6b:a8:3d (oui Unknown),
ethertype IPv4 (0x0800), length 1514: truncated-ip - 2 bytes missing!
(tos 0x0, ttl 64, id 32653, offset 0, flags [DF], proto ICMP (1), length 1502)
OpenWrt.lan > Fecusia: ICMP echo request, id 1672, seq 50, length 1482

If we bypass the hardware checksumming and provide a software
fallback, everything starts working fine up to the max TX MTU
of 2047 bytes, for example ping -s2000 192.168.1.2:

00:44:29.587598 bc:ae:c5:6b:a8:3d (oui Unknown) > 14:d6:4d:a8:3c:4f (oui Unknown),
ethertype IPv4 (0x0800), length 2042:
(tos 0x0, ttl 64, id 51828, offset 0, flags [none], proto ICMP (1), length 2028)
Fecusia > OpenWrt.lan: ICMP echo reply, id 1683, seq 4, length 2008

The bit enabling to bypass hardware checksum (or any of the
"TSS" bits) are undocumented in the hardware reference manual.
The entire hardware checksum unit appears undocumented. The
conclusion that we need to use the "bypass" bit was found by
trial-and-error.

Since no hardware checksum will happen, we slot in a software
checksum fallback.

Check for the condition where we need to compute checksum on the
skb with either hardware or software using == CHECKSUM_PARTIAL instead
of != CHECKSUM_NONE which is an incomplete check according to
<linux/skbuff.h>.

On the D-Link DIR-685 router this fixes a bug on the conduit
interface to the RTL8366RB DSA switch: as the switch needs to add
space for its tag it increases the MTU on the conduit interface
to 1504 and that means that when the router sends packages
of 1500 bytes these get an extra 4 bytes of DSA tag and the
transfer fails because of the erroneous hardware checksumming,
affecting such basic functionality as the LuCI web interface.

Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20231109-gemini-largeframe-fix-v4-2-6e611528db08@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: cortina: Fix max RX frame define

[ Upstream commit 510e35fb931ffc3b100e5d5ae4595cd3beca9f1a ]

Enumerator 3 is 1548 bytes according to the datasheet.
Not 1542.

Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20231109-gemini-largeframe-fix-v4-1-6e611528db08@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bonding: stop the device in bond_setup_by_slave()

[ Upstream commit 3cffa2ddc4d3fcf70cde361236f5a614f81a09b2 ]

Commit 9eed321cde22 ("net: lapbether: only support ethernet devices")
has been able to keep syzbot away from net/lapb, until today.

In the following splat [1], the issue is that a lapbether device has
been created on a bonding device without members. Then adding a non
ARPHRD_ETHER member forced the bonding master to change its type.

The fix is to make sure we call dev_close() in bond_setup_by_slave()
so that the potential linked lapbether devices (or any other devices
having assumptions on the physical device) are removed.

A similar bug has been addressed in commit 40baec225765
("bonding: fix panic on non-ARPHRD_ETHER enslave failure")

[1]
skbuff: skb_under_panic: text:ffff800089508810 len:44 put:40 head:ffff0000c78e7c00 data:ffff0000c78e7bea tail:0x16 end:0x140 dev:bond0
kernel BUG at net/core/skbuff.c:192 !
Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 6007 Comm: syz-executor383 Not tainted 6.6.0-rc3-syzkaller-gbf6547d8715b #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : skb_panic net/core/skbuff.c:188 [inline]
pc : skb_under_panic+0x13c/0x140 net/core/skbuff.c:202
lr : skb_panic net/core/skbuff.c:188 [inline]
lr : skb_under_panic+0x13c/0x140 net/core/skbuff.c:202
sp : ffff800096a06aa0
x29: ffff800096a06ab0 x28: ffff800096a06ba0 x27: dfff800000000000
x26: ffff0000ce9b9b50 x25: 0000000000000016 x24: ffff0000c78e7bea
x23: ffff0000c78e7c00 x22: 000000000000002c x21: 0000000000000140
x20: 0000000000000028 x19: ffff800089508810 x18: ffff800096a06100
x17: 0000000000000000 x16: ffff80008a629a3c x15: 0000000000000001
x14: 1fffe00036837a32 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000201 x10: 0000000000000000 x9 : cb50b496c519aa00
x8 : cb50b496c519aa00 x7 : 0000000000000001 x6 : 0000000000000001
x5 : ffff800096a063b8 x4 : ffff80008e280f80 x3 : ffff8000805ad11c
x2 : 0000000000000001 x1 : 0000000100000201 x0 : 0000000000000086
Call trace:
skb_panic net/core/skbuff.c:188 [inline]
skb_under_panic+0x13c/0x140 net/core/skbuff.c:202
skb_push+0xf0/0x108 net/core/skbuff.c:2446
ip6gre_header+0xbc/0x738 net/ipv6/ip6_gre.c:1384
dev_hard_header include/linux/netdevice.h:3136 [inline]
lapbeth_data_transmit+0x1c4/0x298 drivers/net/wan/lapbether.c:257
lapb_data_transmit+0x8c/0xb0 net/lapb/lapb_iface.c:447
lapb_transmit_buffer+0x178/0x204 net/lapb/lapb_out.c:149
lapb_send_control+0x220/0x320 net/lapb/lapb_subr.c:251
__lapb_disconnect_request+0x9c/0x17c net/lapb/lapb_iface.c:326
lapb_device_event+0x288/0x4e0 net/lapb/lapb_iface.c:492
notifier_call_chain+0x1a4/0x510 kernel/notifier.c:93
raw_notifier_call_chain+0x3c/0x50 kernel/notifier.c:461
call_netdevice_notifiers_info net/core/dev.c:1970 [inline]
call_netdevice_notifiers_extack net/core/dev.c:2008 [inline]
call_netdevice_notifiers net/core/dev.c:2022 [inline]
__dev_close_many+0x1b8/0x3c4 net/core/dev.c:1508
dev_close_many+0x1e0/0x470 net/core/dev.c:1559
dev_close+0x174/0x250 net/core/dev.c:1585
lapbeth_device_event+0x2e4/0x958 drivers/net/wan/lapbether.c:466
notifier_call_chain+0x1a4/0x510 kernel/notifier.c:93
raw_notifier_call_chain+0x3c/0x50 kernel/notifier.c:461
call_netdevice_notifiers_info net/core/dev.c:1970 [inline]
call_netdevice_notifiers_extack net/core/dev.c:2008 [inline]
call_netdevice_notifiers net/core/dev.c:2022 [inline]
__dev_close_many+0x1b8/0x3c4 net/core/dev.c:1508
dev_close_many+0x1e0/0x470 net/core/dev.c:1559
dev_close+0x174/0x250 net/core/dev.c:1585
bond_enslave+0x2298/0x30cc drivers/net/bonding/bond_main.c:2332
bond_do_ioctl+0x268/0xc64 drivers/net/bonding/bond_main.c:4539
dev_ifsioc+0x754/0x9ac
dev_ioctl+0x4d8/0xd34 net/core/dev_ioctl.c:786
sock_do_ioctl+0x1d4/0x2d0 net/socket.c:1217
sock_ioctl+0x4e8/0x834 net/socket.c:1322
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:871 [inline]
__se_sys_ioctl fs/ioctl.c:857 [inline]
__arm64_sys_ioctl+0x14c/0x1c8 fs/ioctl.c:857
__invoke_syscall arch/arm64/kernel/syscall.c:37 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:51
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:136
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:155
el0_svc+0x58/0x16c arch/arm64/kernel/entry-common.c:678
el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:696
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591
Code: aa1803e6 aa1903e7 a90023f5 94785b8b (d4210000)

Fixes: 872254dd6b1f ("net/bonding: Enable bonding to enslave non ARPHRD_ETHER")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20231109180102.4085183-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ptp: annotate data-race around q->head and q->tail

[ Upstream commit 73bde5a3294853947252cd9092a3517c7cb0cd2d ]

As I was working on a syzbot report, I found that KCSAN would
probably complain that reading q->head or q->tail without
barriers could lead to invalid results.

Add corresponding READ_ONCE() and WRITE_ONCE() to avoid
load-store tearing.

Fixes: d94ba80ebbea ("ptp: Added a brand new class driver for ptp clocks.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/20231109174859.3995880-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

blk-mq: make sure active queue usage is held for bio_integrity_prep()

[ Upstream commit b0077e269f6c152e807fdac90b58caf012cdbaab ]

blk_integrity_unregister() can come if queue usage counter isn't held
for one bio with integrity prepared, so this request may be completed with
calling profile->complete_fn, then kernel panic.

Another constraint is that bio_integrity_prep() needs to be called
before bio merge.

Fix the issue by:

- call bio_integrity_prep() with one queue usage counter grabbed reliably

- call bio_integrity_prep() before bio merge

Fixes: 900e080752025f00 ("block: move queue enter logic into blk_mq_submit_bio()")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Link: https://lore.kernel.org/r/20231113035231.2708053-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xen/events: fix delayed eoi list handling

[ Upstream commit 47d970204054f859f35a2237baa75c2d84fcf436 ]

When delaying eoi handling of events, the related elements are queued
into the percpu lateeoi list. In case the list isn't empty, the
elements should be sorted by the time when eoi handling is to happen.

Unfortunately a new element will never be queued at the start of the
list, even if it has a handling time lower than all other list
elements.

Fix that by handling that case the same way as for an empty list.

Fixes: e99502f76271 ("xen/events: defer eoi in case of excessive number of events")
Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ppp: limit MRU to 64K

[ Upstream commit c0a2a1b0d631fc460d830f52d06211838874d655 ]

ppp_sync_ioctl allows setting device MRU, but does not sanity check
this input.

Limit to a sane upper bound of 64KB.

No implementation I could find generates larger than 64KB frames.
RFC 2823 mentions an upper bound of PPP over SDL of 64KB based on the
16-bit length field. Other protocols will be smaller, such as PPPoE
(9KB jumbo frame) and PPPoA (18190 maximum CPCS-SDU size, RFC 2364).
PPTP and L2TP encapsulate in IP.

Syzbot managed to trigger alloc warning in __alloc_pages:

if (WARN_ON_ONCE_GFP(order > MAX_ORDER, gfp))

    WARNING: CPU: 1 PID: 37 at mm/page_alloc.c:4544 __alloc_pages+0x3ab/0x4a0 mm/page_alloc.c:4544

    __alloc_skb+0x12b/0x330 net/core/skbuff.c:651
    __netdev_alloc_skb+0x72/0x3f0 net/core/skbuff.c:715
    netdev_alloc_skb include/linux/skbuff.h:3225 [inline]
    dev_alloc_skb include/linux/skbuff.h:3238 [inline]
    ppp_sync_input drivers/net/ppp/ppp_synctty.c:669 [inline]
    ppp_sync_receive+0xff/0x680 drivers/net/ppp/ppp_synctty.c:334
    tty_ldisc_receive_buf+0x14c/0x180 drivers/tty/tty_buffer.c:390
    tty_port_default_receive_buf+0x70/0xb0 drivers/tty/tty_port.c:37
    receive_buf drivers/tty/tty_buffer.c:444 [inline]
    flush_to_ldisc+0x261/0x780 drivers/tty/tty_buffer.c:494
    process_one_work+0x884/0x15c0 kernel/workqueue.c:2630

With call

    ioctl$PPPIOCSMRU1(r1, 0x40047452, &(0x7f0000000100)=0x5e6417a8)

Similar code exists in other drivers that implement ppp_channel_ops
ioctl PPPIOCSMRU. Those might also be in scope. Notably excluded from
this are pppol2tp_ioctl and pppoe_ioctl.

This code goes back to the start of git history.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+6177e1f90d92583bcc58@syzkaller.appspotmail.com
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: mvneta: fix calls to page_pool_get_stats

[ Upstream commit ca8add922f9c7f6e2e3c71039da8e0dcc64b87ed ]

Calling page_pool_get_stats in the mvneta driver without checks
leads to kernel crashes.
First the page pool is only available if the bm is not used.
The page pool is also not allocated when the port is stopped.
It can also be not allocated in case of errors.

The current implementation leads to the following crash calling
ethstats on a port that is down or when calling it at the wrong moment:

ble to handle kernel NULL pointer dereference at virtual address 00000070
[00000070] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Hardware name: Marvell Armada 380/385 (Device Tree)
PC is at page_pool_get_stats+0x18/0x1cc
LR is at mvneta_ethtool_get_stats+0xa0/0xe0 [mvneta]
pc : [<c0b413cc>]    lr : [<bf0a98d8>]    psr: a0000013
sp : f1439d48  ip : f1439dc0  fp : 0000001d
r10: 00000100  r9 : c4816b80  r8 : f0d75150
r7 : bf0b400c  r6 : c238f000  r5 : 00000000  r4 : f1439d68
r3 : c2091040  r2 : ffffffd8  r1 : f1439d68  r0 : 00000000
Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
Control: 10c5387d  Table: 066b004a  DAC: 00000051
Register r0 information: NULL pointer
Register r1 information: 2-page vmalloc region starting at 0xf1438000 allocated at kernel_clone+0x9c/0x390
Register r2 information: non-paged memory
Register r3 information: slab kmalloc-2k start c2091000 pointer offset 64 size 2048
Register r4 information: 2-page vmalloc region starting at 0xf1438000 allocated at kernel_clone+0x9c/0x390
Register r5 information: NULL pointer
Register r6 information: slab kmalloc-cg-4k start c238f000 pointer offset 0 size 4096
Register r7 information: 15-page vmalloc region starting at 0xbf0a8000 allocated at load_module+0xa30/0x219c
Register r8 information: 1-page vmalloc region starting at 0xf0d75000 allocated at ethtool_get_stats+0x138/0x208
Register r9 information: slab task_struct start c4816b80 pointer offset 0
Register r10 information: non-paged memory
Register r11 information: non-paged memory
Register r12 information: 2-page vmalloc region starting at 0xf1438000 allocated at kernel_clone+0x9c/0x390
Process snmpd (pid: 733, stack limit = 0x38de3a88)
Stack: (0xf1439d48 to 0xf143a000)
9d40:                   000000c0 00000001 c238f000 bf0b400c f0d75150 c4816b80
9d60: 00000100 bf0a98d8 00000000 00000000 00000000 00000000 00000000 00000000
9d80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9da0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9dc0: 00000dc0 5335509c 00000035 c238f000 bf0b2214 01067f50 f0d75000 c0b9b9c8
9de0: 0000001d 00000035 c2212094 5335509c c4816b80 c238f000 c5ad6e00 01067f50
9e00: c1b0be80 c4816b80 00014813 c0b9d7f0 00000000 00000000 0000001d 0000001d
9e20: 00000000 00001200 00000000 00000000 c216ed90 c73943b8 00000000 00000000
9e40: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9e60: 00000000 c0ad9034 00000000 00000000 00000000 00000000 00000000 00000000
9e80: 00000000 00000000 00000000 5335509c c1b0be80 f1439ee4 00008946 c1b0be80
9ea0: 01067f50 f1439ee3 00000000 00000046 b6d77ae0 c0b383f0 00008946 becc83e8
9ec0: c1b0be80 00000051 0000000b c68ca480 c7172d00 c0ad8ff0 f1439ee3 cf600e40
9ee0: 01600e40 32687465 00000000 00000000 00000000 01067f50 00000000 00000000
9f00: 00000000 5335509c 00008946 00008946 00000000 c68ca480 becc83e8 c05e2de0
9f20: f1439fb0 c03002f0 00000006 5ac3c35a c4816b80 00000006 b6d77ae0 c030caf0
9f40: c4817350 00000014 f1439e1c 0000000c 00000000 00000051 01000000 00000014
9f60: 00003fec f1439edc 00000001 c0372abc b6d77ae0 c0372abc cf600e40 5335509c
9f80: c21e6800 01015c9c 0000000b 00008946 00000036 c03002f0 c4816b80 00000036
9fa0: b6d77ae0 c03000c0 01015c9c 0000000b 0000000b 00008946 becc83e8 00000000
9fc0: 01015c9c 0000000b 00008946 00000036 00000035 010678a0 b6d797ec b6d77ae0
9fe0: b6dbf738 becc838c b6d186d7 b6baa858 40000030 0000000b 00000000 00000000
 page_pool_get_stats from mvneta_ethtool_get_stats+0xa0/0xe0 [mvneta]
 mvneta_ethtool_get_stats [mvneta] from ethtool_get_stats+0x154/0x208
 ethtool_get_stats from dev_ethtool+0xf48/0x2480
 dev_ethtool from dev_ioctl+0x538/0x63c
 dev_ioctl from sock_ioctl+0x49c/0x53c
 sock_ioctl from sys_ioctl+0x134/0xbd8
 sys_ioctl from ret_fast_syscall+0x0/0x1c
Exception stack(0xf1439fa8 to 0xf1439ff0)
9fa0:                   01015c9c 0000000b 0000000b 00008946 becc83e8 00000000
9fc0: 01015c9c 0000000b 00008946 00000036 00000035 010678a0 b6d797ec b6d77ae0
9fe0: b6dbf738 becc838c b6d186d7 b6baa858
Code: e28dd004 e1a05000 e2514000 0a00006a (e5902070)

This commit adds the proper checks before calling page_pool_get_stats.

Fixes: b3fc79225f05 ("net: mvneta: add support for page_pool_get_stats")
Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de>
Reported-by: Paulo Da Silva <Paulo.DaSilva@kyberna.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tipc: Fix kernel-infoleak due to uninitialized TLV value

[ Upstream commit fb317eb23b5ee4c37b0656a9a52a3db58d9dd072 ]

KMSAN reported the following kernel-infoleak issue:

=====================================================
BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline]
BUG: KMSAN: kernel-infoleak in copy_to_user_iter lib/iov_iter.c:24 [inline]
BUG: KMSAN: kernel-infoleak in iterate_ubuf include/linux/iov_iter.h:29 [inline]
BUG: KMSAN: kernel-infoleak in iterate_and_advance2 include/linux/iov_iter.h:245 [inline]
BUG: KMSAN: kernel-infoleak in iterate_and_advance include/linux/iov_iter.h:271 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x4ec/0x2bc0 lib/iov_iter.c:186
 instrument_copy_to_user include/linux/instrumented.h:114 [inline]
 copy_to_user_iter lib/iov_iter.c:24 [inline]
 iterate_ubuf include/linux/iov_iter.h:29 [inline]
 iterate_and_advance2 include/linux/iov_iter.h:245 [inline]
 iterate_and_advance include/linux/iov_iter.h:271 [inline]
 _copy_to_iter+0x4ec/0x2bc0 lib/iov_iter.c:186
 copy_to_iter include/linux/uio.h:197 [inline]
 simple_copy_to_iter net/core/datagram.c:532 [inline]
 __skb_datagram_iter.5+0x148/0xe30 net/core/datagram.c:420
 skb_copy_datagram_iter+0x52/0x210 net/core/datagram.c:546
 skb_copy_datagram_msg include/linux/skbuff.h:3960 [inline]
 netlink_recvmsg+0x43d/0x1630 net/netlink/af_netlink.c:1967
 sock_recvmsg_nosec net/socket.c:1044 [inline]
 sock_recvmsg net/socket.c:1066 [inline]
 __sys_recvfrom+0x476/0x860 net/socket.c:2246
 __do_sys_recvfrom net/socket.c:2264 [inline]
 __se_sys_recvfrom net/socket.c:2260 [inline]
 __x64_sys_recvfrom+0x130/0x200 net/socket.c:2260
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

Uninit was created at:
 slab_post_alloc_hook+0x103/0x9e0 mm/slab.h:768
 slab_alloc_node mm/slub.c:3478 [inline]
 kmem_cache_alloc_node+0x5f7/0xb50 mm/slub.c:3523
 kmalloc_reserve+0x13c/0x4a0 net/core/skbuff.c:560
 __alloc_skb+0x2fd/0x770 net/core/skbuff.c:651
 alloc_skb include/linux/skbuff.h:1286 [inline]
 tipc_tlv_alloc net/tipc/netlink_compat.c:156 [inline]
 tipc_get_err_tlv+0x90/0x5d0 net/tipc/netlink_compat.c:170
 tipc_nl_compat_recv+0x1042/0x15d0 net/tipc/netlink_compat.c:1324
 genl_family_rcv_msg_doit net/netlink/genetlink.c:972 [inline]
 genl_family_rcv_msg net/netlink/genetlink.c:1052 [inline]
 genl_rcv_msg+0x1220/0x12c0 net/netlink/genetlink.c:1067
 netlink_rcv_skb+0x4a4/0x6a0 net/netlink/af_netlink.c:2545
 genl_rcv+0x41/0x60 net/netlink/genetlink.c:1076
 netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline]
 netlink_unicast+0xf4b/0x1230 net/netlink/af_netlink.c:1368
 netlink_sendmsg+0x1242/0x1420 net/netlink/af_netlink.c:1910
 sock_sendmsg_nosec net/socket.c:730 [inline]
 __sock_sendmsg net/socket.c:745 [inline]
 ____sys_sendmsg+0x997/0xd60 net/socket.c:2588
 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2642
 __sys_sendmsg net/socket.c:2671 [inline]
 __do_sys_sendmsg net/socket.c:2680 [inline]
 __se_sys_sendmsg net/socket.c:2678 [inline]
 __x64_sys_sendmsg+0x2fa/0x4a0 net/socket.c:2678
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

Bytes 34-35 of 36 are uninitialized
Memory access of size 36 starts at ffff88802d464a00
Data copied to user address 00007ff55033c0a0

CPU: 0 PID: 30322 Comm: syz-executor.0 Not tainted 6.6.0-14500-g1c41041124bd #10
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014
=====================================================

tipc_add_tlv() puts TLV descriptor and value onto `skb`. This size is
calculated with TLV_SPACE() macro. It adds the size of struct tlv_desc and
the length of TLV value passed as an argument, and aligns the result to a
multiple of TLV_ALIGNTO, i.e., a multiple of 4 bytes.

If the size of struct tlv_desc plus the length of TLV value is not aligned,
the current implementation leaves the remaining bytes uninitialized. This
is the cause of the above kernel-infoleak issue.

This patch resolves this issue by clearing data up to an aligned size.

Fixes: d0796d1ef63d ("tipc: convert legacy nl bearer dump to nl compat")
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: fix VF wrong speed and duplex issue

[ Upstream commit dff655e82faffc287d4a72a59f66fa120bf904e4 ]

If PF is down, firmware will returns 10 Mbit/s rate and half-duplex mode
when PF queries the port information from firmware.

After imp reset command is executed, PF status changes to down,
and PF will query link status and updates port information
from firmware in a periodic scheduled task.

However, there is a low probability that port information is updated
when PF is down, and then PF link status changes to up.
In this case, PF synchronizes incorrect rate and duplex mode to VF.

This patch fixes it by updating port information before
PF synchronizes the rate and duplex to the VF
when PF changes to up.

Fixes: 18b6e31f8bf4 ("net: hns3: PF add support for pushing link status to VFs")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: fix VF reset fail issue

[ Upstream commit 65e98bb56fa3ce2edb400930c05238c9b380500e ]

Currently the reset process in hns3 and firmware watchdog init process is
asynchronous. We think firmware watchdog initialization is completed
before VF clear the interrupt source. However, firmware initialization
may not complete early. So VF will receive multiple reset interrupts
and fail to reset.

So we add delay before VF interrupt source and 5 ms delay
is enough to avoid second reset interrupt.

Fixes: 427900d27d86 ("net: hns3: fix the timing issue of VF clearing interrupt sources")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: fix variable may not initialized problem in hns3_init_mac_addr()

[ Upstream commit dbd2f3b20c6ae425665b6975d766e3653d453e73 ]

When a VF is calling hns3_init_mac_addr(), get_mac_addr() may
return fail, then the value of mac_addr_temp is not initialized.

Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: fix out-of-bounds access may occur when coalesce info is read via debugfs

[ Upstream commit 53aba458f23846112c0d44239580ff59bc5c36c3 ]

The hns3 driver define an array of string to show the coalesce
info, but if the kernel adds a new mode or a new state,
out-of-bounds access may occur when coalesce info is read via
debugfs, this patch fix the problem.

Fixes: c99fead7cb07 ("net: hns3: add debugfs support for interrupt coalesce")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: fix incorrect capability bit display for copper port

[ Upstream commit 75b247b57d8b71bcb679e4cb37d0db104848806c ]

Currently, the FEC capability bit is default set for device version V2.
It's incorrect for the copper port. Eventhough it doesn't make the nic
work abnormal, but the capability information display in debugfs may
confuse user. So clear it when driver get the port type inforamtion.

Fixes: 433ccce83504 ("net: hns3: use FEC capability queried from firmware")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: add barrier in vf mailbox reply process

[ Upstream commit ac92c0a9a0603fb448e60f38e63302e4eebb8035 ]

In hclgevf_mbx_handler() and hclgevf_get_mbx_resp() functions,
there is a typical store-store and load-load scenario between
received_resp and additional_info. This patch adds barrier
to fix the problem.

Fixes: 4671042f1ef0 ("net: hns3: add match_id to check mailbox response from PF to VF")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: fix add VLAN fail issue

[ Upstream commit 472a2ff63efb30234cbf6b2cdaf8117f21b4f8bc ]

The hclge_sync_vlan_filter is called in periodic task,
trying to remove VLAN from vlan_del_fail_bmap. It can
be concurrence with VLAN adding operation from user.
So once user failed to delete a VLAN id, and add it
again soon, it may be removed by the periodic task,
which may cause the software configuration being
inconsistent with hardware. So add mutex handling
to avoid this.

     user                        hns3 driver

                                           periodic task
                                                │
  add vlan 10 ───── hns3_vlan_rx_add_vid        │
       │             (suppose success)          │
       │                                        │
  del vlan 10 ─────  hns3_vlan_rx_kill_vid      │
       │           (suppose fail,add to         │
       │             vlan_del_fail_bmap)        │
       │                                        │
  add vlan 10 ───── hns3_vlan_rx_add_vid        │
                     (suppose success)          │
                                       foreach vlan_del_fail_bmp
                                            del vlan 10

Fixes: fe4144d47eef ("net: hns3: sync VLAN filter entries when kill VLAN ID failed")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xen/events: avoid using info_for_irq() in xen_send_IPI_one()

[ Upstream commit e64e7c74b99ec9e439abca75f522f4b98f220bd1 ]

xen_send_IPI_one() is being used by cpuhp_report_idle_dead() after
it calls rcu_report_dead(), meaning that any RCU usage by
xen_send_IPI_one() is a bad idea.

Unfortunately xen_send_IPI_one() is using notify_remote_via_irq()
today, which is using irq_get_chip_data() via info_for_irq(). And
irq_get_chip_data() in turn is using a maple-tree lookup requiring
RCU.

Avoid this problem by caching the ipi event channels in another
percpu variable, allowing the use notify_remote_via_evtchn() in
xen_send_IPI_one().

Fixes: 721255b9826b ("genirq: Use a maple tree for interrupt descriptor management")
Reported-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ti: icssg-prueth: Fix error cleanup on failing pruss_request_mem_region

[ Upstream commit 2bd5b559a1f391f05927bbb0b31381fa71c61e26 ]

We were just continuing in this case, surely not desired.

Fixes: 128d5874c082 ("net: ti: icssg-prueth: Add ICSSG ethernet driver")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ti: icssg-prueth: Add missing icss_iep_put to error path

[ Upstream commit e409d7346648c9acff84c3cc8d291767ee2d5326 ]

Analogously to prueth_remove, just also taking care for NULL'ing the
iep pointers.

Fixes: 186734c15886 ("net: ti: icssg-prueth: add packet timestamping and ptp support")
Fixes: 443a2367ba3c ("net: ti: icssg-prueth: am65x SR2.0 add 10M full duplex support")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: Fix uninit-value access in ppp_sync_receive()

[ Upstream commit 719639853d88071dfdfd8d9971eca9c283ff314c ]

KMSAN reported the following uninit-value access issue:

=====================================================
BUG: KMSAN: uninit-value in ppp_sync_input drivers/net/ppp/ppp_synctty.c:690 [inline]
BUG: KMSAN: uninit-value in ppp_sync_receive+0xdc9/0xe70 drivers/net/ppp/ppp_synctty.c:334
 ppp_sync_input drivers/net/ppp/ppp_synctty.c:690 [inline]
 ppp_sync_receive+0xdc9/0xe70 drivers/net/ppp/ppp_synctty.c:334
 tiocsti+0x328/0x450 drivers/tty/tty_io.c:2295
 tty_ioctl+0x808/0x1920 drivers/tty/tty_io.c:2694
 vfs_ioctl fs/ioctl.c:51 [inline]
 __do_sys_ioctl fs/ioctl.c:871 [inline]
 __se_sys_ioctl+0x211/0x400 fs/ioctl.c:857
 __x64_sys_ioctl+0x97/0xe0 fs/ioctl.c:857
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

Uninit was created at:
 __alloc_pages+0x75d/0xe80 mm/page_alloc.c:4591
 __alloc_pages_node include/linux/gfp.h:238 [inline]
 alloc_pages_node include/linux/gfp.h:261 [inline]
 __page_frag_cache_refill+0x9a/0x2c0 mm/page_alloc.c:4691
 page_frag_alloc_align+0x91/0x5d0 mm/page_alloc.c:4722
 page_frag_alloc include/linux/gfp.h:322 [inline]
 __netdev_alloc_skb+0x215/0x6d0 net/core/skbuff.c:728
 netdev_alloc_skb include/linux/skbuff.h:3225 [inline]
 dev_alloc_skb include/linux/skbuff.h:3238 [inline]
 ppp_sync_input drivers/net/ppp/ppp_synctty.c:669 [inline]
 ppp_sync_receive+0x237/0xe70 drivers/net/ppp/ppp_synctty.c:334
 tiocsti+0x328/0x450 drivers/tty/tty_io.c:2295
 tty_ioctl+0x808/0x1920 drivers/tty/tty_io.c:2694
 vfs_ioctl fs/ioctl.c:51 [inline]
 __do_sys_ioctl fs/ioctl.c:871 [inline]
 __se_sys_ioctl+0x211/0x400 fs/ioctl.c:857
 __x64_sys_ioctl+0x97/0xe0 fs/ioctl.c:857
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

CPU: 0 PID: 12950 Comm: syz-executor.1 Not tainted 6.6.0-14500-g1c41041124bd #10
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014
=====================================================

ppp_sync_input() checks the first 2 bytes of the data are PPP_ALLSTATIONS
and PPP_UI. However, if the data length is 1 and the first byte is
PPP_ALLSTATIONS, an access to an uninitialized value occurs when checking
PPP_UI. This patch resolves this issue by checking the data length.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipvlan: add ipvlan_route_v6_outbound() helper

[ Upstream commit 18f039428c7df183b09c69ebf10ffd4e521035d2 ]

Inspired by syzbot reports using a stack of multiple ipvlan devices.

Reduce stack size needed in ipvlan_process_v6_outbound() by moving
the flowi6 struct used for the route lookup in an non inlined
helper. ipvlan_route_v6_outbound() needs 120 bytes on the stack,
immediately reclaimed.

Also make sure ipvlan_process_v4_outbound() is not inlined.

We might also have to lower MAX_NEST_DEV, because only syzbot uses
setups with more than four stacked devices.

BUG: TASK stack guard page was hit at ffffc9000e803ff8 (stack is ffffc9000e804000..ffffc9000e808000)
stack guard page: 0000 [#1] SMP KASAN
CPU: 0 PID: 13442 Comm: syz-executor.4 Not tainted 6.1.52-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023
RIP: 0010:kasan_check_range+0x4/0x2a0 mm/kasan/generic.c:188
Code: 48 01 c6 48 89 c7 e8 db 4e c1 03 31 c0 5d c3 cc 0f 0b eb 02 0f 0b b8 ea ff ff ff 5d c3 cc 00 00 cc cc 00 00 cc cc 55 48 89 e5 <41> 57 41 56 41 55 41 54 53 b0 01 48 85 f6 0f 84 a4 01 00 00 48 89
RSP: 0018:ffffc9000e804000 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff817e5bf2
RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffffffff887c6568
RBP: ffffc9000e804000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: dffffc0000000001 R12: 1ffff92001d0080c
R13: dffffc0000000000 R14: ffffffff87e6b100 R15: 0000000000000000
FS: 00007fd0c55826c0(0000) GS:ffff8881f6800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffc9000e803ff8 CR3: 0000000170ef7000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<#DF>
</#DF>
<TASK>
[<ffffffff81f281d1>] __kasan_check_read+0x11/0x20 mm/kasan/shadow.c:31
[<ffffffff817e5bf2>] instrument_atomic_read include/linux/instrumented.h:72 [inline]
[<ffffffff817e5bf2>] _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
[<ffffffff817e5bf2>] cpumask_test_cpu include/linux/cpumask.h:506 [inline]
[<ffffffff817e5bf2>] cpu_online include/linux/cpumask.h:1092 [inline]
[<ffffffff817e5bf2>] trace_lock_acquire include/trace/events/lock.h:24 [inline]
[<ffffffff817e5bf2>] lock_acquire+0xe2/0x590 kernel/locking/lockdep.c:5632
[<ffffffff8563221e>] rcu_lock_acquire+0x2e/0x40 include/linux/rcupdate.h:306
[<ffffffff8561464d>] rcu_read_lock include/linux/rcupdate.h:747 [inline]
[<ffffffff8561464d>] ip6_pol_route+0x15d/0x1440 net/ipv6/route.c:2221
[<ffffffff85618120>] ip6_pol_route_output+0x50/0x80 net/ipv6/route.c:2606
[<ffffffff856f65b5>] pol_lookup_func include/net/ip6_fib.h:584 [inline]
[<ffffffff856f65b5>] fib6_rule_lookup+0x265/0x620 net/ipv6/fib6_rules.c:116
[<ffffffff85618009>] ip6_route_output_flags_noref+0x2d9/0x3a0 net/ipv6/route.c:2638
[<ffffffff8561821a>] ip6_route_output_flags+0xca/0x340 net/ipv6/route.c:2651
[<ffffffff838bd5a3>] ip6_route_output include/net/ip6_route.h:100 [inline]
[<ffffffff838bd5a3>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:473 [inline]
[<ffffffff838bd5a3>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline]
[<ffffffff838bd5a3>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline]
[<ffffffff838bd5a3>] ipvlan_queue_xmit+0xc33/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677
[<ffffffff838c2909>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229
[<ffffffff84d03900>] netdev_start_xmit include/linux/netdevice.h:4966 [inline]
[<ffffffff84d03900>] xmit_one net/core/dev.c:3644 [inline]
[<ffffffff84d03900>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660
[<ffffffff84d080e2>] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324
[<ffffffff855ce4cd>] dev_queue_xmit include/linux/netdevice.h:3067 [inline]
[<ffffffff855ce4cd>] neigh_hh_output include/net/neighbour.h:529 [inline]
[<ffffffff855ce4cd>] neigh_output include/net/neighbour.h:543 [inline]
[<ffffffff855ce4cd>] ip6_finish_output2+0x160d/0x1ae0 net/ipv6/ip6_output.c:139
[<ffffffff855b8616>] __ip6_finish_output net/ipv6/ip6_output.c:200 [inline]
[<ffffffff855b8616>] ip6_finish_output+0x6c6/0xb10 net/ipv6/ip6_output.c:211
[<ffffffff855b7e3c>] NF_HOOK_COND include/linux/netfilter.h:298 [inline]
[<ffffffff855b7e3c>] ip6_output+0x2bc/0x3d0 net/ipv6/ip6_output.c:232
[<ffffffff8575d27f>] dst_output include/net/dst.h:444 [inline]
[<ffffffff8575d27f>] ip6_local_out+0x10f/0x140 net/ipv6/output_core.c:161
[<ffffffff838bdae4>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:483 [inline]
[<ffffffff838bdae4>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline]
[<ffffffff838bdae4>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline]
[<ffffffff838bdae4>] ipvlan_queue_xmit+0x1174/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677
[<ffffffff838c2909>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229
[<ffffffff84d03900>] netdev_start_xmit include/linux/netdevice.h:4966 [inline]
[<ffffffff84d03900>] xmit_one net/core/dev.c:3644 [inline]
[<ffffffff84d03900>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660
[<ffffffff84d080e2>] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324
[<ffffffff855ce4cd>] dev_queue_xmit include/linux/netdevice.h:3067 [inline]
[<ffffffff855ce4cd>] neigh_hh_output include/net/neighbour.h:529 [inline]
[<ffffffff855ce4cd>] neigh_output include/net/neighbour.h:543 [inline]
[<ffffffff855ce4cd>] ip6_finish_output2+0x160d/0x1ae0 net/ipv6/ip6_output.c:139
[<ffffffff855b8616>] __ip6_finish_output net/ipv6/ip6_output.c:200 [inline]
[<ffffffff855b8616>] ip6_finish_output+0x6c6/0xb10 net/ipv6/ip6_output.c:211
[<ffffffff855b7e3c>] NF_HOOK_COND include/linux/netfilter.h:298 [inline]
[<ffffffff855b7e3c>] ip6_output+0x2bc/0x3d0 net/ipv6/ip6_output.c:232
[<ffffffff8575d27f>] dst_output include/net/dst.h:444 [inline]
[<ffffffff8575d27f>] ip6_local_out+0x10f/0x140 net/ipv6/output_core.c:161
[<ffffffff838bdae4>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:483 [inline]
[<ffffffff838bdae4>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline]
[<ffffffff838bdae4>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline]
[<ffffffff838bdae4>] ipvlan_queue_xmit+0x1174/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677
[<ffffffff838c2909>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229
[<ffffffff84d03900>] netdev_start_xmit include/linux/netdevice.h:4966 [inline]
[<ffffffff84d03900>] xmit_one net/core/dev.c:3644 [inline]
[<ffffffff84d03900>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660
[<ffffffff84d080e2>] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324
[<ffffffff855ce4cd>] dev_queue_xmit include/linux/netdevice.h:3067 [inline]
[<ffffffff855ce4cd>] neigh_hh_output include/net/neighbour.h:529 [inline]
[<ffffffff855ce4cd>] neigh_output include/net/neighbour.h:543 [inline]
[<ffffffff855ce4cd>] ip6_finish_output2+0x160d/0x1ae0 net/ipv6/ip6_output.c:139
[<ffffffff855b8616>] __ip6_finish_output net/ipv6/ip6_output.c:200 [inline]
[<ffffffff855b8616>] ip6_finish_output+0x6c6/0xb10 net/ipv6/ip6_output.c:211
[<ffffffff855b7e3c>] NF_HOOK_COND include/linux/netfilter.h:298 [inline]
[<ffffffff855b7e3c>] ip6_output+0x2bc/0x3d0 net/ipv6/ip6_output.c:232
[<ffffffff8575d27f>] dst_output include/net/dst.h:444 [inline]
[<ffffffff8575d27f>] ip6_local_out+0x10f/0x140 net/ipv6/output_core.c:161
[<ffffffff838bdae4>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:483 [inline]
[<ffffffff838bdae4>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline]
[<ffffffff838bdae4>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline]
[<ffffffff838bdae4>] ipvlan_queue_xmit+0x1174/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677
[<ffffffff838c2909>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229
[<ffffffff84d03900>] netdev_start_xmit include/linux/netdevice.h:4966 [inline]
[<ffffffff84d03900>] xmit_one net/core/dev.c:3644 [inline]
[<ffffffff84d03900>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660
[<ffffffff84d080e2>] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324
[<ffffffff855ce4cd>] dev_queue_xmit include/linux/netdevice.h:3067 [inline]
[<ffffffff855ce4cd>] neigh_hh_output include/net/neighbour.h:529 [inline]
[<ffffffff855ce4cd>] neigh_output include/net/neighbour.h:543 [inline]
[<ffffffff855ce4cd>] ip6_finish_output2+0x160d/0x1ae0 net/ipv6/ip6_output.c:139
[<ffffffff855b8616>] __ip6_finish_output net/ipv6/ip6_output.c:200 [inline]
[<ffffffff855b8616>] ip6_finish_output+0x6c6/0xb10 net/ipv6/ip6_output.c:211
[<ffffffff855b7e3c>] NF_HOOK_COND include/linux/netfilter.h:298 [inline]
[<ffffffff855b7e3c>] ip6_output+0x2bc/0x3d0 net/ipv6/ip6_output.c:232
[<ffffffff8575d27f>] dst_output include/net/dst.h:444 [inline]
[<ffffffff8575d27f>] ip6_local_out+0x10f/0x140 net/ipv6/output_core.c:161
[<ffffffff838bdae4>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:483 [inline]
[<ffffffff838bdae4>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline]
[<ffffffff838bdae4>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline]
[<ffffffff838bdae4>] ipvlan_queue_xmit+0x1174/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677
[<ffffffff838c2909>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229
[<ffffffff84d03900>] netdev_start_xmit include/linux/netdevice.h:4966 [inline]
[<ffffffff84d03900>] xmit_one net/core/dev.c:3644 [inline]
[<ffffffff84d03900>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660
[<ffffffff84d080e2>] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324
[<ffffffff84d4a65e>] dev_queue_xmit include/linux/netdevice.h:3067 [inline]
[<ffffffff84d4a65e>] neigh_resolve_output+0x64e/0x750 net/core/neighbour.c:1560
[<ffffffff855ce503>] neigh_output include/net/neighbour.h:545 [inline]
[<ffffffff855ce503>] ip6_finish_output2+0x1643/0x1ae0 net/ipv6/ip6_output.c:139
[<ffffffff855b8616>] __ip6_finish_output net/ipv6/ip6_output.c:200 [inline]
[<ffffffff855b8616>] ip6_finish_output+0x6c6/0xb10 net/ipv6/ip6_output.c:211
[<ffffffff855b7e3c>] NF_HOOK_COND include/linux/netfilter.h:298 [inline]
[<ffffffff855b7e3c>] ip6_output+0x2bc/0x3d0 net/ipv6/ip6_output.c:232
[<ffffffff855b9ce4>] dst_output include/net/dst.h:444 [inline]
[<ffffffff855b9ce4>] NF_HOOK include/linux/netfilter.h:309 [inline]
[<ffffffff855b9ce4>] ip6_xmit+0x11a4/0x1b20 net/ipv6/ip6_output.c:352
[<ffffffff8597984e>] sctp_v6_xmit+0x9ae/0x1230 net/sctp/ipv6.c:250
[<ffffffff8594623e>] sctp_packet_transmit+0x25de/0x2bc0 net/sctp/output.c:653
[<ffffffff858f5142>] sctp_packet_singleton+0x202/0x310 net/sctp/outqueue.c:783
[<ffffffff858ea411>] sctp_outq_flush_ctrl net/sctp/outqueue.c:914 [inline]
[<ffffffff858ea411>] sctp_outq_flush+0x661/0x3d40 net/sctp/outqueue.c:1212
[<ffffffff858f02f9>] sctp_outq_uncork+0x79/0xb0 net/sctp/outqueue.c:764
[<ffffffff8589f060>] sctp_side_effects net/sctp/sm_sideeffect.c:1199 [inline]
[<ffffffff8589f060>] sctp_do_sm+0x55c0/0x5c30 net/sctp/sm_sideeffect.c:1170
[<ffffffff85941567>] sctp_primitive_ASSOCIATE+0x97/0xc0 net/sctp/primitive.c:73
[<ffffffff859408b2>] sctp_sendmsg_to_asoc+0xf62/0x17b0 net/sctp/socket.c:1839
[<ffffffff85910b5e>] sctp_sendmsg+0x212e/0x33b0 net/sctp/socket.c:2029
[<ffffffff8544d559>] inet_sendmsg+0x149/0x310 net/ipv4/af_inet.c:849
[<ffffffff84c6c4d2>] sock_sendmsg_nosec net/socket.c:716 [inline]
[<ffffffff84c6c4d2>] sock_sendmsg net/socket.c:736 [inline]
[<ffffffff84c6c4d2>] ____sys_sendmsg+0x572/0x8c0 net/socket.c:2504
[<ffffffff84c6ca91>] ___sys_sendmsg net/socket.c:2558 [inline]
[<ffffffff84c6ca91>] __sys_sendmsg+0x271/0x360 net/socket.c:2587
[<ffffffff84c6cbff>] __do_sys_sendmsg net/socket.c:2596 [inline]
[<ffffffff84c6cbff>] __se_sys_sendmsg net/socket.c:2594 [inline]
[<ffffffff84c6cbff>] __x64_sys_sendmsg+0x7f/0x90 net/socket.c:2594
[<ffffffff85b32553>] do_syscall_x64 arch/x86/entry/common.c:51 [inline]
[<ffffffff85b32553>] do_syscall_64+0x53/0x80 arch/x86/entry/common.c:84
[<ffffffff85c00087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Mahesh Bandewar <maheshb@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: set SOCK_RCU_FREE before inserting socket into hashtable

[ Upstream commit 871019b22d1bcc9fab2d1feba1b9a564acbb6e99 ]

We've started to see the following kernel traces:

 WARNING: CPU: 83 PID: 0 at net/core/filter.c:6641 sk_lookup+0x1bd/0x1d0

 Call Trace:
  <IRQ>
  __bpf_skc_lookup+0x10d/0x120
  bpf_sk_lookup+0x48/0xd0
  bpf_sk_lookup_tcp+0x19/0x20
  bpf_prog_<redacted>+0x37c/0x16a3
  cls_bpf_classify+0x205/0x2e0
  tcf_classify+0x92/0x160
  __netif_receive_skb_core+0xe52/0xf10
  __netif_receive_skb_list_core+0x96/0x2b0
  napi_complete_done+0x7b5/0xb70
  <redacted>_poll+0x94/0xb0
  net_rx_action+0x163/0x1d70
  __do_softirq+0xdc/0x32e
  asm_call_irq_on_stack+0x12/0x20
  </IRQ>
  do_softirq_own_stack+0x36/0x50
  do_softirq+0x44/0x70

__inet_hash can race with lockless (rcu) readers on the other cpus:

  __inet_hash
    __sk_nulls_add_node_rcu
    <- (bpf triggers here)
    sock_set_flag(SOCK_RCU_FREE)

Let's move the SOCK_RCU_FREE part up a bit, before we are inserting
the socket into hashtables. Note, that the race is really harmless;
the bpf callers are handling this situation (where listener socket
doesn't have SOCK_RCU_FREE set) correctly, so the only
annoyance is a WARN_ONCE.

More details from Eric regarding SOCK_RCU_FREE timeline:

Commit 3b24d854cb35 ("tcp/dccp: do not touch listener sk_refcnt under
synflood") added SOCK_RCU_FREE. At that time, the precise location of
sock_set_flag(sk, SOCK_RCU_FREE) did not matter, because the thread calling
__inet_hash() owns a reference on sk. SOCK_RCU_FREE was only tested
at dismantle time.

Commit 6acc9b432e67 ("bpf: Add helper to retrieve socket in BPF")
started checking SOCK_RCU_FREE _after_ the lookup to infer whether
the refcount has been taken care of.

Fixes: 6acc9b432e67 ("bpf: Add helper to retrieve socket in BPF")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: fix control-flow graph checking in privileged mode

[ Upstream commit 10e14e9652bf9e8104151bfd9200433083deae3d ]

When BPF program is verified in privileged mode, BPF verifier allows
bounded loops. This means that from CFG point of view there are
definitely some back-edges. Original commit adjusted check_cfg() logic
to not detect back-edges in control flow graph if they are resulting
from conditional jumps, which the idea that subsequent full BPF
verification process will determine whether such loops are bounded or
not, and either accept or reject the BPF program. At least that's my
reading of the intent.

Unfortunately, the implementation of this idea doesn't work correctly in
all possible situations. Conditional jump might not result in immediate
back-edge, but just a few unconditional instructions later we can arrive
at back-edge. In such situations check_cfg() would reject BPF program
even in privileged mode, despite it might be bounded loop. Next patch
adds one simple program demonstrating such scenario.

To keep things simple, instead of trying to detect back edges in
privileged mode, just assume every back edge is valid and let subsequent
BPF verification prove or reject bounded loops.

Note a few test changes. For unknown reason, we have a few tests that
are specified to detect a back-edge in a privileged mode, but looking at
their code it seems like the right outcome is passing check_cfg() and
letting subsequent verification to make a decision about bounded or not
bounded looping.

Bounded recursion case is also interesting. The example should pass, as
recursion is limited to just a few levels and so we never reach maximum
number of nested frames and never exhaust maximum stack depth. But the
way that max stack depth logic works today it falsely detects this as
exceeding max nested frame count. This patch series doesn't attempt to
fix this orthogonal problem, so we just adjust expected verifier failure.

Suggested-by: Alexei Starovoitov <ast@kernel.org>
Fixes: 2589726d12a1 ("bpf: introduce bounded loops")
Reported-by: Hao Sun <sunhao.th@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231110061412.2995786-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: fix precision backtracking instruction iteration

[ Upstream commit 4bb7ea946a370707315ab774432963ce47291946 ]

Fix an edge case in __mark_chain_precision() which prematurely stops
backtracking instructions in a state if it happens that state's first
and last instruction indexes are the same. This situations doesn't
necessarily mean that there were no instructions simulated in a state,
but rather that we starting from the instruction, jumped around a bit,
and then ended up at the same instruction before checkpointing or
marking precision.

To distinguish between these two possible situations, we need to consult
jump history. If it's empty or contain a single record "bridging" parent
state and first instruction of processed state, then we indeed
backtracked all instructions in this state. But if history is not empty,
we are definitely not done yet.

Move this logic inside get_prev_insn_idx() to contain it more nicely.
Use -ENOENT return code to denote "we are out of instructions"
situation.

This bug was exposed by verifier_loop1.c's bounded_recursion subtest, once
the next fix in this patch set is applied.

Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Fixes: b5dc0163d8fd ("bpf: precise scalar_value tracking")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231110002638.4168352-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: handle ldimm64 properly in check_cfg()

[ Upstream commit 3feb263bb516ee7e1da0acd22b15afbb9a7daa19 ]

ldimm64 instructions are 16-byte long, and so have to be handled
appropriately in check_cfg(), just like the rest of BPF verifier does.

This has implications in three places:
  - when determining next instruction for non-jump instructions;
  - when determining next instruction for callback address ldimm64
    instructions (in visit_func_call_insn());
  - when checking for unreachable instructions, where second half of
    ldimm64 is expected to be unreachable;

We take this also as an opportunity to report jump into the middle of
ldimm64. And adjust few test_verifier tests accordingly.

Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Reported-by: Hao Sun <sunhao.th@gmail.com>
Fixes: 475fb78fbf48 ("bpf: verifier (add branch/goto checks)")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231110002638.4168352-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gcc-plugins: randstruct: Only warn about true flexible arrays

[ Upstream commit 1ee60356c2dca938362528404af95b8ef3e49b6a ]

The randstruct GCC plugin tried to discover "fake" flexible arrays
to issue warnings about them in randomized structs. In the future
LSM overhead reduction series, it would be legal to have a randomized
struct with a 1-element array, and this should _not_ be treated as a
flexible array, especially since commit df8fc4e934c1 ("kbuild: Enable
-fstrict-flex-arrays=3"). Disable the 0-sized and 1-element array
discovery logic in the plugin, but keep the "true" flexible array check.

Cc: KP Singh <kpsingh@kernel.org>
Cc: linux-hardening@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311021532.iBwuZUZ0-lkp@intel.com/
Fixes: df8fc4e934c1 ("kbuild: Enable -fstrict-flex-arrays=3")
Reviewed-by: Bill Wendling <morbo@google.com>
Acked-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20231104204334.work.160-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vhost-vdpa: fix use after free in vhost_vdpa_probe()

[ Upstream commit e07754e0a1ea2d63fb29574253d1fd7405607343 ]

The put_device() calls vhost_vdpa_release_dev() which calls
ida_simple_remove() and frees "v".  So this call to
ida_simple_remove() is a use after free and a double free.

Fixes: ebe6a354fa7e ("vhost-vdpa: Call ida_simple_remove() when failed")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Message-Id: <cf53cb61-0699-4e36-a980-94fd4268ff00@moroto.mountain>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vdpa_sim_blk: allocate the buffer zeroed

[ Upstream commit 0d82410252ea324f0064e75b9865bb74cccc1dda ]

Deleting and recreating a device can lead to having the same
content as the old device, so let's always allocate buffers
completely zeroed out.

Fixes: abebb16254b3 ("vdpa_sim_blk: support shared backend")
Suggested-by: Qing Wang <qinwang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20231031144339.121453-1-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: split cache ops out of dma-noncoherent.c

[ Upstream commit 946bb33d330251966223f770f64885c79448b1a1 ]

The cache ops are also used by the pmem code which is unconditionally
built into the kernel.  Move them into a separate file that is built
based on the correct config option.

Fixes: fd962781270e ("riscv: RISCV_NONSTANDARD_CACHE_OPS shouldn't depend on RISCV_DMA_NONCOHERENT")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> #
Link: https://lore.kernel.org/r/20231028155101.1039049-1-hch@lst.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915/tc: Fix -Wformat-truncation in intel_tc_port_init

[ Upstream commit 9506fba463fcbdf8c8b7af3ec9ee34360df843fe ]

Fix below compiler warning:

intel_tc.c:1879:11: error: ‘%d’ directive output may be truncated
writing between 1 and 11 bytes into a region of size 3
[-Werror=format-truncation=]
"%c/TC#%d", port_name(port), tc_port + 1);
           ^~
intel_tc.c:1878:2: note: ‘snprintf’ output between 7 and 17 bytes
into a destination of size 8
  snprintf(tc->port_name, sizeof(tc->port_name),
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    "%c/TC#%d", port_name(port), tc_port + 1);
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

v2: use kasprintf(Imre)
v3: use const for port_name, and fix tc mem leak(Imre)

Fixes: 3eafcddf766b ("drm/i915/tc: Move TC port fields to a new intel_tc_port struct")
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231026125636.5080-1-nirmoy.das@intel.com
(cherry picked from commit 70a3cbbe620ee66afb0c066624196077767e61b2)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gfs2: Silence "suspicious RCU usage in gfs2_permission" warning

[ Upstream commit 074d7306a4fe22fcac0b53f699f92757ab1cee99 ]

Commit 0abd1557e21c added rcu_dereference() for dereferencing ip->i_gl
in gfs2_permission.  This now causes lockdep to complain when
gfs2_permission is called in non-RCU context:

    WARNING: suspicious RCU usage in gfs2_permission

Switch to rcu_dereference_check() and check for the MAY_NOT_BLOCK flag
to shut up lockdep when we know that dereferencing ip->i_gl is safe.

Fixes: 0abd1557e21c ("gfs2: fix an oops in gfs2_permission")
Reported-by: syzbot+3e5130844b0c0e2b4948@syzkaller.appspotmail.com
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: provide riscv-specific is_trap_insn()

[ Upstream commit b701f9e726f0a30a94ea6af596b74c1f07b95b6b ]

uprobes expects is_trap_insn() to return true for any trap instructions,
not just the one used for installing uprobe. The current default
implementation only returns true for 16-bit c.ebreak if C extension is
enabled. This can confuse uprobes if a 32-bit ebreak generates a trap
exception from userspace: uprobes asks is_trap_insn() who says there is no
trap, so uprobes assume a probe was there before but has been removed, and
return to the trap instruction. This causes an infinite loop of entering
and exiting trap handler.

Instead of using the default implementation, implement this function
speficially for riscv with checks for both ebreak and c.ebreak.

Fixes: 74784081aac8 ("riscv: Add uprobes supported")
Signed-off-by: Nam Cao <namcaov@gmail.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20230829083614.117748-1-namcaov@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RISC-V: hwprobe: Fix vDSO SIGSEGV

[ Upstream commit e1c05b3bf80f829ced464bdca90f1dfa96e8d251 ]

A hwprobe pair key is signed, but the hwprobe vDSO function was
only checking that the upper bound was valid. In order to help
avoid this type of problem in the future, and in anticipation of
this check becoming more complicated with sparse keys, introduce
and use a "key is valid" predicate function for the check.

Fixes: aa5af0aa90ba ("RISC-V: Add hwprobe vDSO function and data")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Evan Green <evan@rivosinc.com>
Link: https://lore.kernel.org/r/20231010165101.14942-2-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: Fix RPC client cleaned up the freed pipefs dentries

[ Upstream commit bfca5fb4e97c46503ddfc582335917b0cc228264 ]

RPC client pipefs dentries cleanup is in separated rpc_remove_pipedir()
workqueue,which takes care about pipefs superblock locking.
In some special scenarios, when kernel frees the pipefs sb of the
current client and immediately alloctes a new pipefs sb,
rpc_remove_pipedir function would misjudge the existence of pipefs
sb which is not the one it used to hold. As a result,
the rpc_remove_pipedir would clean the released freed pipefs dentries.

To fix this issue, rpc_remove_pipedir should check whether the
current pipefs sb is consistent with the original pipefs sb.

This error can be catched by KASAN:
=========================================================
[  250.497700] BUG: KASAN: slab-use-after-free in dget_parent+0x195/0x200
[  250.498315] Read of size 4 at addr ffff88800a2ab804 by task kworker/0:18/106503
[  250.500549] Workqueue: events rpc_free_client_work
[  250.501001] Call Trace:
[  250.502880]  kasan_report+0xb6/0xf0
[  250.503209]  ? dget_parent+0x195/0x200
[  250.503561]  dget_parent+0x195/0x200
[  250.503897]  ? __pfx_rpc_clntdir_depopulate+0x10/0x10
[  250.504384]  rpc_rmdir_depopulate+0x1b/0x90
[  250.504781]  rpc_remove_client_dir+0xf5/0x150
[  250.505195]  rpc_free_client_work+0xe4/0x230
[  250.505598]  process_one_work+0x8ee/0x13b0
...
[   22.039056] Allocated by task 244:
[   22.039390]  kasan_save_stack+0x22/0x50
[   22.039758]  kasan_set_track+0x25/0x30
[   22.040109]  __kasan_slab_alloc+0x59/0x70
[   22.040487]  kmem_cache_alloc_lru+0xf0/0x240
[   22.040889]  __d_alloc+0x31/0x8e0
[   22.041207]  d_alloc+0x44/0x1f0
[   22.041514]  __rpc_lookup_create_exclusive+0x11c/0x140
[   22.041987]  rpc_mkdir_populate.constprop.0+0x5f/0x110
[   22.042459]  rpc_create_client_dir+0x34/0x150
[   22.042874]  rpc_setup_pipedir_sb+0x102/0x1c0
[   22.043284]  rpc_client_register+0x136/0x4e0
[   22.043689]  rpc_new_client+0x911/0x1020
[   22.044057]  rpc_create_xprt+0xcb/0x370
[   22.044417]  rpc_create+0x36b/0x6c0
...
[   22.049524] Freed by task 0:
[   22.049803]  kasan_save_stack+0x22/0x50
[   22.050165]  kasan_set_track+0x25/0x30
[   22.050520]  kasan_save_free_info+0x2b/0x50
[   22.050921]  __kasan_slab_free+0x10e/0x1a0
[   22.051306]  kmem_cache_free+0xa5/0x390
[   22.051667]  rcu_core+0x62c/0x1930
[   22.051995]  __do_softirq+0x165/0x52a
[   22.052347]
[   22.052503] Last potentially related work creation:
[   22.052952]  kasan_save_stack+0x22/0x50
[   22.053313]  __kasan_record_aux_stack+0x8e/0xa0
[   22.053739]  __call_rcu_common.constprop.0+0x6b/0x8b0
[   22.054209]  dentry_free+0xb2/0x140
[   22.054540]  __dentry_kill+0x3be/0x540
[   22.054900]  shrink_dentry_list+0x199/0x510
[   22.055293]  shrink_dcache_parent+0x190/0x240
[   22.055703]  do_one_tree+0x11/0x40
[   22.056028]  shrink_dcache_for_umount+0x61/0x140
[   22.056461]  generic_shutdown_super+0x70/0x590
[   22.056879]  kill_anon_super+0x3a/0x60
[   22.057234]  rpc_kill_sb+0x121/0x200

Fixes: 0157d021d23a ("SUNRPC: handle RPC client pipefs dentries by network namespace aware routines")
Signed-off-by: felix <fuzhen5@huawei.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4.1: fix SP4_MACH_CRED protection for pnfs IO

[ Upstream commit 5cc7688bae7f0757c39c1d3dfdd827b724061067 ]

If the client is doing pnfs IO and Kerberos is configured and EXCHANGEID
successfully negotiated SP4_MACH_CRED and WRITE/COMMIT are on the
list of state protected operations, then we need to make sure to
choose the DS's rpc_client structure instead of the MDS's one.

Fixes: fb91fb0ee7b2 ("NFS: Move call to nfs4_state_protect_write() to nfs4_write_setup()")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: Add an IS_ERR() check back to where it was

[ Upstream commit 4f3ed837186fc0d2722ba8d2457a594322e9c2ef ]

This IS_ERR() check was deleted during in a cleanup because, at the time,
the rpcb_call_async() function could not return an error pointer.  That
changed in commit 25cf32ad5dba ("SUNRPC: Handle allocation failure in
rpc_new_task()") and now it can return an error pointer.  Put the check
back.

A related revert was done in commit 13bd90141804 ("Revert "SUNRPC:
Remove unreachable error condition"").

Fixes: 037e910b52b0 ("SUNRPC: Remove unreachable error condition in rpcb_getport_async()")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4.1: fix handling NFS4ERR_DELAY when testing for session trunking

[ Upstream commit 6bd1a77dc72dea0b0d8b6014f231143984d18f6d ]

Currently when client sends an EXCHANGE_ID for a possible trunked
connection, for any error that happened, the trunk will be thrown
out. However, an NFS4ERR_DELAY is a transient error that should be
retried instead.

Fixes: e818bd085baf ("NFSv4.1 remove xprt from xprt_switch if session trunking test fails")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915/mtl: avoid stringop-overflow warning

[ Upstream commit 390001d648ffa027b750b7dceb5d43f4c1d1a39e ]

The newly added memset() causes a warning for some reason I could not
figure out:

In file included from arch/x86/include/asm/string.h:3,
                 from drivers/gpu/drm/i915/gt/intel_rc6.c:6:
In function 'rc6_res_reg_init',
    inlined from 'intel_rc6_init' at drivers/gpu/drm/i915/gt/intel_rc6.c:610:2:
arch/x86/include/asm/string_32.h:195:29: error: '__builtin_memset' writing 16 bytes into a region of size 0 overflows the destination [-Werror=stringop-overflow=]
  195 | #define memset(s, c, count) __builtin_memset(s, c, count)
      |                             ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/i915/gt/intel_rc6.c:584:9: note: in expansion of macro 'memset'
  584 |         memset(rc6->res_reg, INVALID_MMIO_REG.reg, sizeof(rc6->res_reg));
      |         ^~~~~~
In function 'intel_rc6_init':

Change it to an normal initializer and an added memcpy() that does not have
this problem.

Fixes: 4bb9ca7ee074 ("drm/i915/mtl: C6 residency and C state type for MTL SAMedia")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231016201012.1022812-1-arnd@kernel.org
(cherry picked from commit 0520b30b219053cd789909bca45b3c486ef3ee09)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: meson: check return value of devm_kasprintf()

[ Upstream commit 5a985960a4dd041c21dbe9956958c1633d2da706 ]

devm_kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful by
checking the pointer validity.

Fixes: 1e4d3ba66888 ("mtd: rawnand: meson: fix the clock")
Signed-off-by: Yi Yang <yiyang13@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20231019065548.318443-1-yiyang13@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: intel: check return value of devm_kasprintf()

[ Upstream commit 74ac5b5e2375f1e8ef797ac7770887e9969f2516 ]

devm_kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful by
checking the pointer validity.

Fixes: 0b1039f016e8 ("mtd: rawnand: Add NAND controller support on Intel LGM SoC")
Signed-off-by: Yi Yang <yiyang13@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20231019065537.318391-1-yiyang13@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: ECONNRESET might require a rebind

[ Upstream commit 4b09ca1508a60be30b2e3940264e93d7aeb5c97e ]

If connect() is returning ECONNRESET, it usually means that nothing is
listening on that port. If so, a rebind might be required in order to
obtain the new port on which the RPC service is listening.

Fixes: fd01b2597941 ("SUNRPC: ECONNREFUSED should cause a rebind.")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dt-bindings: serial: fix regex pattern for matching serial node children

[ Upstream commit 42851dfd4dbe38e34724a00063a9fad5cfc48dcd ]

The regular expression pattern for matching serial node children should
accept only nodes starting and ending with the set of words: bluetooth,
gnss, gps or mcu.  Add missing brackets to enforce such matching.

Fixes: 0c559bc8abfb ("dt-bindings: serial: restrict possible child node names")
Reported-by: Andreas Kemnade <andreas@kemnade.info>
Closes: https://lore.kernel.org/all/20231004170021.36b32465@aktux/
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231005093247.128166-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

samples/bpf: syscall_tp_user: Fix array out-of-bound access

[ Upstream commit 9220c3ef6fefbf18f24aeedb1142a642b3de0596 ]

Commit 06744f24696e ("samples/bpf: Add openat2() enter/exit tracepoint
to syscall_tp sample") added two more eBPF programs to support the
openat2() syscall. However, it did not increase the size of the array
that holds the corresponding bpf_links. This leads to an out-of-bound
access on that array in the bpf_object__for_each_program loop and could
corrupt other variables on the stack. On our testing QEMU, it corrupts
the map1_fds array and causes the sample to fail:

  # ./syscall_tp
  prog #0: map ids 4 5
  verify map:4 val: 5
  map_lookup failed: Bad file descriptor

Dynamically allocate the array based on the number of programs reported
by libbpf to prevent similar inconsistencies in the future

Fixes: 06744f24696e ("samples/bpf: Add openat2() enter/exit tracepoint to syscall_tp sample")
Signed-off-by: Jinghao Jia <jinghao@linux.ibm.com>
Signed-off-by: Ruowen Qin <ruowenq2@illinois.edu>
Signed-off-by: Jinghao Jia <jinghao7@illinois.edu>
Link: https://lore.kernel.org/r/20230917214220.637721-4-jinghao7@illinois.edu
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

samples/bpf: syscall_tp_user: Rename num_progs into nr_tests

[ Upstream commit 0ee352fe0d28015cab161b04d202fa3231c0ba3b ]

The variable name num_progs causes confusion because that variable
really controls the number of rounds the test should be executed.

Rename num_progs into nr_tests for the sake of clarity.

Signed-off-by: Jinghao Jia <jinghao@linux.ibm.com>
Signed-off-by: Ruowen Qin <ruowenq2@illinois.edu>
Signed-off-by: Jinghao Jia <jinghao7@illinois.edu>
Link: https://lore.kernel.org/r/20230917214220.637721-3-jinghao7@illinois.edu
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of: 9220c3ef6fef ("samples/bpf: syscall_tp_user: Fix array out-of-bound access")
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/core: Optimize in_task() and in_interrupt() a bit

[ Upstream commit 87c3a5893e865739ce78aa7192d36011022e0af7 ]

Except on x86, preempt_count is always accessed with READ_ONCE().
Repeated invocations in macros like irq_count() produce repeated loads.
These redundant instructions appear in various fast paths. In the one
shown below, for example, irq_count() is evaluated during kernel entry
if !tick_nohz_full_cpu(smp_processor_id()).

0001ed0a <irq_enter_rcu>:
   1ed0a:       4e56 0000       linkw %fp,#0
   1ed0e:       200f            movel %sp,%d0
   1ed10:       0280 ffff e000  andil #-8192,%d0
   1ed16:       2040            moveal %d0,%a0
   1ed18:       2028 0008       movel %a0@(8),%d0
   1ed1c:       0680 0001 0000  addil #65536,%d0
   1ed22:       2140 0008       movel %d0,%a0@(8)
   1ed26:       082a 0001 000f  btst #1,%a2@(15)
   1ed2c:       670c            beqs 1ed3a <irq_enter_rcu+0x30>
   1ed2e:       2028 0008       movel %a0@(8),%d0
   1ed32:       2028 0008       movel %a0@(8),%d0
   1ed36:       2028 0008       movel %a0@(8),%d0
   1ed3a:       4e5e            unlk %fp
   1ed3c:       4e75            rts

This patch doesn't prevent the pointless btst and beqs instructions
above, but it does eliminate 2 of the 3 pointless move instructions
here and elsewhere.

On x86, preempt_count is per-cpu data and the problem does not arise
presumably because the compiler is free to optimize more effectively.

This patch was tested on m68k and x86. I was expecting no changes
to object code for x86 and mostly that's what I saw. However, there
were a few places where code generation was perturbed for some reason.

The performance issue addressed here is minor on uniprocessor m68k. I
got a 0.01% improvement from this patch for a simple "find /sys -false"
benchmark. For architectures and workloads susceptible to cache line bounce
the improvement is expected to be larger. The only SMP architecture I have
is x86, and as x86 unaffected I have not done any further measurements.

Fixes: 15115830c887 ("preempt: Cleanup the macro maze a bit")
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/0a403120a682a525e6db2d81d1a3ffcc137c3742.1694756831.git.fthain@linux-m68k.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: Use FW rate for non-data frames

[ Upstream commit 499d02790495958506a64f37ceda7e97345a50a8 ]

Currently we are setting the rate in the tx cmd for
mgmt frames (e.g. during connection establishment).
This was problematic when sending mgmt frames in eSR mode,
as we don't know what link this frame will be sent on
(This is decided by the FW), so we don't know what is the
lowest rate.
Fix this by not setting the rate in tx cmd and rely
on FW to choose the right one.
Set rate only for injected frames with fixed rate,
or when no sta is given.
Also set for important frames (EAPOL etc.) the High Priority flag.

Fixes: 055b22e770dd ("iwlwifi: mvm: Set Tx rate and flags when there is not station")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230913145231.6c7e59620ee0.I6eaed3ccdd6dd62b9e664facc484081fc5275843@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: tegra: add missing check for platform_get_irq()

[ Upstream commit 0a1166c27d4e53186e6bf9147ea6db9cd1d65847 ]

Add the missing check for platform_get_irq() and return error code
if it fails.

Fixes: d7d9f8ec77fe ("mtd: rawnand: add NVIDIA Tegra NAND Flash controller driver")
Signed-off-by: Yi Yang <yiyang13@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230821084046.217025-1-yiyang13@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>