review.tizen.org Git - platform/kernel/linux-starfive.git/log

virtio-mem: Allow to offline partially unplugged memory blocks

Dropping the reference count of PageOffline() pages during MEM_GOING_ONLINE
allows offlining code to skip them. However, we also have to clear
PG_reserved, because PG_reserved pages get detected as unmovable right
away. Take care of restoring the reference count when offlining is
canceled.

Clarify why we don't have to perform any action when unloading the
driver. Also, let's add a warning if anybody is still holding a
reference to unplugged pages when offlining.

Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-8-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

mm: Allow to offline unmovable PageOffline() pages via MEM_GOING_OFFLINE

virtio-mem wants to allow to offline memory blocks of which some parts
were unplugged (allocated via alloc_contig_range()), especially, to later
offline and remove completely unplugged memory blocks. The important part
is that PageOffline() has to remain set until the section is offline, so
these pages will never get accessed (e.g., when dumping). The pages should
not be handed back to the buddy (which would require clearing PageOffline()
and result in issues if offlining fails and the pages are suddenly in the
buddy).

Let's allow to do that by allowing to isolate any PageOffline() page
when offlining. This way, we can reach the memory hotplug notifier
MEM_GOING_OFFLINE, where the driver can signal that he is fine with
offlining this page by dropping its reference count. PageOffline() pages
with a reference count of 0 can then be skipped when offlining the
pages (like if they were free, however they are not in the buddy).

Anybody who uses PageOffline() pages and does not agree to offline them
(e.g., Hyper-V balloon, XEN balloon, VMWare balloon for 2MB pages) will not
decrement the reference count and make offlining fail when trying to
migrate such an unmovable page. So there should be no observable change.
Same applies to balloon compaction users (movable PageOffline() pages), the
pages will simply be migrated.

Note 1: If offlining fails, a driver has to increment the reference
count again in MEM_CANCEL_OFFLINE.

Note 2: A driver that makes use of this has to be aware that re-onlining
the memory block has to be handled by hooking into onlining code
(online_page_callback_t), resetting the page PageOffline() and
not giving them to the buddy.

Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Anthony Yznaga <anthony.yznaga@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Pingfan Liu <kernelfans@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-7-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio-mem: Paravirtualized memory hotunplug part 2

We also want to unplug online memory (contained in online memory blocks
and, therefore, managed by the buddy), and eventually replug it later.

When requested to unplug memory, we use alloc_contig_range() to allocate
subblocks in online memory blocks (so we are the owner) and send them to
our hypervisor. When requested to plug memory, we can replug such memory
using free_contig_range() after asking our hypervisor.

We also want to mark all allocated pages PG_offline, so nobody will
touch them. To differentiate pages that were never onlined when
onlining the memory block from pages allocated via alloc_contig_range(), we
use PageDirty(). Based on this flag, virtio_mem_fake_online() can either
online the pages for the first time or use free_contig_range().

It is worth noting that there are no guarantees on how much memory can
actually get unplugged again. All device memory might completely be
fragmented with unmovable data, such that no subblock can get unplugged.

We are not touching the ZONE_MOVABLE. If memory is onlined to the
ZONE_MOVABLE, it can only get unplugged after that memory was offlined
manually by user space. In normal operation, virtio-mem memory is
suggested to be onlined to ZONE_NORMAL. In the future, we will try to
make unplug more likely to succeed.

Add a module parameter to control if online memory shall be touched.

As we want to access alloc_contig_range()/free_contig_range() from
kernel module context, export the symbols.

Note: Whenever virtio-mem uses alloc_contig_range(), all affected pages
are on the same node, in the same zone, and contain no holes.

Acked-by: Michal Hocko <mhocko@suse.com> # to export contig range allocator API
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-6-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio-mem: Paravirtualized memory hotunplug part 1

Unplugging subblocks of memory blocks that are offline is easy. All we
have to do is watch out for concurrent onlining activity.

Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-5-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio-mem: Allow to specify an ACPI PXM as nid

We want to allow to specify (similar as for a DIMM), to which node a
virtio-mem device (and, therefore, its memory) belongs. Add a new
virtio-mem feature flag and export pxm_to_node, so it can be used in kernel
module context.

Acked-by: Michal Hocko <mhocko@suse.com> # for the export
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org> # for the export
Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-4-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

MAINTAINERS: Add myself as virtio-mem maintainer

Let's make sure patches/bug reports find the right person.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-3-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio-mem: Paravirtualized memory hotplug

Each virtio-mem device owns exactly one memory region. It is responsible
for adding/removing memory from that memory region on request.

When the device driver starts up, the requested amount of memory is
queried and then plugged to Linux. On request, further memory can be
plugged or unplugged. This patch only implements the plugging part.

On x86-64, memory can currently be plugged in 4MB ("subblock") granularity.
When required, a new memory block will be added (e.g., usually 128MB on
x86-64) in order to plug more subblocks. Only x86-64 was tested for now.

The online_page callback is used to keep unplugged subblocks offline
when onlining memory - similar to the Hyper-V balloon driver. Unplugged
pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to
skip them.

User space is usually responsible for onlining the added memory. The
memory hotplug notifier is used to synchronize virtio-mem activity
against memory onlining/offlining.

Each virtio-mem device can belong to a NUMA node, which allows us to
easily add/remove small chunks of memory to/from a specific NUMA node by
using multiple virtio-mem devices. Something that works even when the
guest has no idea about the NUMA topology.

One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many
"sub-DIMMS".

This patch directly introduces the basic infrastructure to implement memory
unplug. Especially the memory block states and subblock bitmaps will be
heavily used there.

Notes:
- In case memory is to be onlined by user space, we limit the amount of
  offline memory blocks, to not run out of memory. This is esp. an
  issue if memory is added faster than it is getting onlined.
- Suspend/Hibernate is not supported due to the way virtio-mem devices
  behave. Limited support might be possible in the future.
- Reloading the device driver is not supported.

Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

vdpasim: Fix some coccinelle warnings

Fix below warnings reported by coccicheck:

drivers/vdpa/vdpa_sim/vdpa_sim.c:104:1-10: WARNING: Assignment of 0/1 to bool variable
drivers/vdpa/vdpa_sim/vdpa_sim.c:164:7-11: WARNING: Unsigned expression compared with zero: read <= 0
drivers/vdpa/vdpa_sim/vdpa_sim.c:169:7-12: WARNING: Unsigned expression compared with zero: write <= 0

1. The 'ready' variable in vdpasim_virtqueue struct is bool type.
It is better to initialize vq->ready to false

2. Modify 'read' and 'write' variables type from size_t to ssize_t.
And preserve the reverse christmas tree ordering of local variables.

Fixes: 2c53d0f64c06 ("vdpasim: vDPA device simulator")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Samuel Zou <zou_wei@huawei.com>
Link: https://lore.kernel.org/r/1588990802-28451-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

ifcvf: move IRQ request/free to status change handlers

This commit move IRQ request and free operations from probe()
to VIRTIO status change handler to comply with VIRTIO spec.

VIRTIO spec 1.1, section 2.1.2 Device Requirements: Device Status Field
The device MUST NOT consume buffers or send any used buffer
notifications to the driver before DRIVER_OK.

Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Link: https://lore.kernel.org/r/1589270444-3669-1-git-send-email-lingshan.zhu@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>

vhost: (cosmetic) remove a superfluous variable initialisation

Even the compiler is able to figure out that in this case the
initialisation is superfluous.

Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200527180541.5570-3-guennadi.liakhovetski@linux.intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

crypto: virtio: Fix dest length calculation in __virtio_crypto_skcipher_do_req()

The src/dst length is not aligned with AES_BLOCK_SIZE(which is 16) in some
testcases in tcrypto.ko.

For example, the src/dst length of one of cts(cbc(aes))'s testcase is 17, the
crypto_virtio driver will set @src_data_len=16 but @dst_data_len=17 in this
case and get a wrong at then end.

  SRC: pp pp pp pp pp pp pp pp pp pp pp pp pp pp pp pp pp (17 bytes)
  EXP: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc pp (17 bytes)
  DST: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc 00 (pollute the last bytes)
  (pp: plaintext  cc:ciphertext)

Fix this issue by limit the length of dest buffer.

Fixes: dbaf0624ffa5 ("crypto: add virtio-crypto driver")
Cc: Gonglei <arei.gonglei@huawei.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: virtualization@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Link: https://lore.kernel.org/r/20200602070501.2023-4-longpeng2@huawei.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

crypto: virtio: Fix use-after-free in virtio_crypto_skcipher_finalize_req()

The system'll crash when the users insmod crypto/tcrypto.ko with mode=155
( testing "authenc(hmac(sha1),cbc(aes))" ). It's caused by reuse the memory
of request structure.

In crypto_authenc_init_tfm(), the reqsize is set to:
  [PART 1] sizeof(authenc_request_ctx) +
  [PART 2] ictx->reqoff +
  [PART 3] MAX(ahash part, skcipher part)
and the 'PART 3' is used by both ahash and skcipher in turn.

When the virtio_crypto driver finish skcipher req, it'll call ->complete
callback(in crypto_finalize_skcipher_request) and then free its
resources whose pointers are recorded in 'skcipher parts'.

However, the ->complete is 'crypto_authenc_encrypt_done' in this case,
it will use the 'ahash part' of the request and change its content,
so virtio_crypto driver will get the wrong pointer after ->complete
finish and mistakenly free some other's memory. So the system will crash
when these memory will be used again.

The resources which need to be cleaned up are not used any more. But the
pointers of these resources may be changed in the function
"crypto_finalize_skcipher_request". Thus release specific resources before
calling this function.

Fixes: dbaf0624ffa5 ("crypto: add virtio-crypto driver")
Reported-by: LABBE Corentin <clabbe@baylibre.com>
Cc: Gonglei <arei.gonglei@huawei.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: virtualization@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200123101000.GB24255@Red
Acked-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Link: https://lore.kernel.org/r/20200602070501.2023-3-longpeng2@huawei.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

crypto: virtio: Fix src/dst scatterlist calculation in __virtio_crypto_skcipher_do_req()

The system will crash when the users insmod crypto/tcrypt.ko with mode=38
( testing "cts(cbc(aes))" ).

Usually the next entry of one sg will be @sg@ + 1, but if this sg element
is part of a chained scatterlist, it could jump to the start of a new
scatterlist array. Fix it by sg_next() on calculation of src/dst
scatterlist.

Fixes: dbaf0624ffa5 ("crypto: add virtio-crypto driver")
Reported-by: LABBE Corentin <clabbe@baylibre.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: virtualization@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200123101000.GB24255@Red
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Link: https://lore.kernel.org/r/20200602070501.2023-2-longpeng2@huawei.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio-balloon: Disable free page reporting if page poison reporting is not enabled

We should disable free page reporting if page poisoning is enabled but we
cannot report it via the balloon interface. This way we can avoid the
possibility of corrupting guest memory. Normally the page poisoning feature
should always be present when free page reporting is enabled on the
hypervisor, however this allows us to correctly handle a case of the
virtio-balloon device being possibly misconfigured.

Fixes: 5d757c8d518d ("virtio-balloon: add support for providing free page reports to host")
Cc: stable@vger.kernel.org
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Link: https://lore.kernel.org/r/20200508173732.17877.85060.stgit@localhost.localdomain
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

vhost_vdpa: disable doorbell mapping for !MMU

There could be ways to support doorbell mapping with !MMU, but things
like pgprot_noncached are not universally supported.
Fixable, but just disable this for now.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

vhost_vdpa: support doorbell mapping via mmap

Currently the doorbell is relayed via eventfd which may have
significant overhead because of the cost of vmexits or syscall. This
patch introduces mmap() based doorbell mapping which can eliminate the
overhead caused by vmexit or syscall.

To ease the userspace modeling of the doorbell layout (usually
virtio-pci), this patch starts from a doorbell per page
model. Vhost-vdpa only support the hardware doorbell that sit at the
boundary of a page and does not share the page with other registers.

Doorbell of each virtqueue must be mapped separately, pgoff is the
index of the virtqueue. This allows userspace to map a subset of the
doorbell which may be useful for the implementation of software
assisted virtqueue (control vq) in the future.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20200529080303.15449-5-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

vdpa: introduce get_vq_notification method

This patch introduces a new method in the vdpa_config_ops which
reports the physical address and the size of the doorbell for a
specific virtqueue.

This will be used by the future patches that maps doorbell to
userspace.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20200529080303.15449-4-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

vhost: use mmgrab() instead of mmget() for non worker device

For the device that doesn't use vhost worker and use_mm(), mmget() is
too heavy weight and it may brings troubles for implementing mmap()
support for vDPA device.

This is because, an reference to the address space was held via
mm_get() in vhost_dev_set_owner() and an reference to the file was
held in mmap(). This means when process exits, the mm can not be
released thus we can not release the file.

This patch tries to use mmgrab() instead of mmget(), which allows the
address space to be destroy in process exit without releasing the mm
structure itself. This is sufficient for vDPA device which pin user
pages and does not depend on the address space to work.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20200529080303.15449-3-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

vhost: allow device that does not depend on vhost worker

vDPA device currently relays the eventfd via vhost worker. This is
inefficient due the latency of wakeup and scheduling, so this patch
tries to introduce a use_worker attribute for the vhost device. When
use_worker is not set with vhost_dev_init(), vhost won't try to
allocate a worker thread and the vhost_poll will be processed directly
in the wakeup function.

This help for vDPA since it reduces the latency caused by vhost worker.

In my testing, it saves 0.2 ms in pings between VMs on a mutual host.

Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20200529080303.15449-2-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

MAINTAINERS: Add myself as virtio-balloon co-maintainer

As suggested by Michael, let's add me as co-maintainer of virtio-balloon.
While at it, also add "include/linux/balloon_compaction.h" to the file
list.

Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200310115411.12760-1-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

vhost: revert "vhost: disable for OABI"

This reverts commit d085eb8ce727 ("vhost: disable for OABI")
With commit "virtio: force spec specified alignment on types"
in place, we force proper alignment for all structures,
so there's no longer a reason to blacklist OABI.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio: force spec specified alignment on types

The ring element addresses are passed between components with different
alignments assumptions. Thus, if guest/userspace selects a pointer and
host then gets and dereferences it, we might need to decrease the
compiler-selected alignment to prevent compiler on the host from
assuming pointer is aligned.

This actually triggers on ARM with -mabi=apcs-gnu - which is a
deprecated configuration, but it seems safer to handle this
generally.

Note that userspace that allocates the memory is actually OK and does
not need to be fixed, but userspace that gets it from guest or another
process does need to be fixed. The later doesn't generally talk to the
kernel so while it might be buggy it's not talking to the kernel in the
buggy way - it's just using the header in the buggy way - so fixing
header and asking userspace to recompile is the best we can do.

I verified that the produced kernel binary on x86 is exactly identical
before and after the change.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>

virtio-mmio: Delete an error message in vm_find_vqs()

The function “platform_get_irq” can log an error already.
Thus omit a redundant message for the exception handling in the
calling function.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://lore.kernel.org/r/9e27bc4a-cfa1-7818-dc25-8ad308816b30@web.de
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio: add VIRTIO_RING_NO_LEGACY

Add macro to disable legacy vring functions.

Signed-off-by: Matej Genci <matej.genci@nutanix.com>
Link: https://lore.kernel.org/r/20190911124942.243713-1-matej.genci@nutanix.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Linux 5.7

checkpatch/coding-style: deprecate 80-column warning

Yes, staying withing 80 columns is certainly still _preferred_.  But
it's not the hard limit that the checkpatch warnings imply, and other
concerns can most certainly dominate.

Increase the default limit to 100 characters.  Not because 100
characters is some hard limit either, but that's certainly a "what are
you doing" kind of value and less likely to be about the occasional
slightly longer lines.

Miscellanea:

- to avoid unnecessary whitespace changes in files, checkpatch will no
   longer emit a warning about line length when scanning files unless
   --strict is also used

- Add a bit to coding-style about alignment to open parenthesis

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'x86-urgent-2020-05-31' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Thomas Gleixner:
"A pile of x86 fixes:

   - Prevent a memory leak in ioperm which was caused by the stupid
     assumption that the exit cleanup is always called for current,
     which is not the case when fork fails after taking a reference on
     the ioperm bitmap.

   - Fix an arithmething overflow in the DMA code on 32bit systems

   - Fill gaps in the xstate copy with defaults instead of leaving them
     uninitialized

   - Revert: "Make __X32_SYSCALL_BIT be unsigned long" as it turned out
     that existing user space fails to build"

* tag 'x86-urgent-2020-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/ioperm: Prevent a memory leak when fork fails
  x86/dma: Fix max PFN arithmetic overflow on 32 bit systems
  copy_xstate_to_kernel(): don't leave parts of destination uninitialized
  x86/syscalls: Revert "x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long"

Merge tag 'sched-urgent-2020-05-31' of git://git./linux/kernel/git/tip/tip

Pull scheduler fix from Thomas Gleixner:
"A single scheduler fix preventing a crash in NUMA balancing.

  The current->mm check is not reliable as the mm might be temporary due
  to use_mm() in a kthread. Check for PF_KTHREAD explictly"

* tag 'sched-urgent-2020-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Don't NUMA balance for kthreads

Merge git://git./linux/kernel/git/netdev/net

Pull networking fixes from David Miller:
"Another week, another set of bug fixes:

   1) Fix pskb_pull length in __xfrm_transport_prep(), from Xin Long.

   2) Fix double xfrm_state put in esp{4,6}_gro_receive(), also from Xin
      Long.

   3) Re-arm discovery timer properly in mac80211 mesh code, from Linus
      Lüssing.

   4) Prevent buffer overflows in nf_conntrack_pptp debug code, from
      Pablo Neira Ayuso.

   5) Fix race in ktls code between tls_sw_recvmsg() and
      tls_decrypt_done(), from Vinay Kumar Yadav.

   6) Fix crashes on TCP fallback in MPTCP code, from Paolo Abeni.

   7) More validation is necessary of untrusted GSO packets coming from
      virtualization devices, from Willem de Bruijn.

   8) Fix endianness of bnxt_en firmware message length accesses, from
      Edwin Peer.

   9) Fix infinite loop in sch_fq_pie, from Davide Caratti.

  10) Fix lockdep splat in DSA by setting lockless TX in netdev features
      for slave ports, from Vladimir Oltean.

  11) Fix suspend/resume crashes in mlx5, from Mark Bloch.

  12) Fix use after free in bpf fmod_ret, from Alexei Starovoitov.

  13) ARP retransmit timer guard uses wrong offset, from Hongbin Liu.

  14) Fix leak in inetdev_init(), from Yang Yingliang.

  15) Don't try to use inet hash and unhash in l2tp code, results in
      crashes. From Eric Dumazet"

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits)
  l2tp: add sk_family checks to l2tp_validate_socket
  l2tp: do not use inet_hash()/inet_unhash()
  net: qrtr: Allocate workqueue before kernel_bind
  mptcp: remove msk from the token container at destruction time.
  mptcp: fix race between MP_JOIN and close
  mptcp: fix unblocking connect()
  net/sched: act_ct: add nat mangle action only for NAT-conntrack
  devinet: fix memleak in inetdev_init()
  virtio_vsock: Fix race condition in virtio_transport_recv_pkt
  drivers/net/ibmvnic: Update VNIC protocol version reporting
  NFC: st21nfca: add missed kfree_skb() in an error path
  neigh: fix ARP retransmit timer guard
  bpf, selftests: Add a verifier test for assigning 32bit reg states to 64bit ones
  bpf, selftests: Verifier bounds tests need to be updated
  bpf: Fix a verifier issue when assigning 32bit reg states to 64bit ones
  bpf: Fix use-after-free in fmod_ret check
  net/mlx5e: replace EINVAL in mlx5e_flower_parse_meta()
  net/mlx5e: Fix MLX5_TC_CT dependencies
  net/mlx5e: Properly set default values when disabling adaptive moderation
  net/mlx5e: Fix arch depending casting issue in FEC
  ...

l2tp: add sk_family checks to l2tp_validate_socket

syzbot was able to trigger a crash after using an ISDN socket
and fool l2tp.

Fix this by making sure the UDP socket is of the proper family.

BUG: KASAN: slab-out-of-bounds in setup_udp_tunnel_sock+0x465/0x540 net/ipv4/udp_tunnel.c:78
Write of size 1 at addr ffff88808ed0c590 by task syz-executor.5/3018

CPU: 0 PID: 3018 Comm: syz-executor.5 Not tainted 5.7.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x188/0x20d lib/dump_stack.c:118
print_address_description.constprop.0.cold+0xd3/0x413 mm/kasan/report.c:382
__kasan_report.cold+0x20/0x38 mm/kasan/report.c:511
kasan_report+0x33/0x50 mm/kasan/common.c:625
setup_udp_tunnel_sock+0x465/0x540 net/ipv4/udp_tunnel.c:78
l2tp_tunnel_register+0xb15/0xdd0 net/l2tp/l2tp_core.c:1523
l2tp_nl_cmd_tunnel_create+0x4b2/0xa60 net/l2tp/l2tp_netlink.c:249
genl_family_rcv_msg_doit net/netlink/genetlink.c:673 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:718 [inline]
genl_rcv_msg+0x627/0xdf0 net/netlink/genetlink.c:735
netlink_rcv_skb+0x15a/0x410 net/netlink/af_netlink.c:2469
genl_rcv+0x24/0x40 net/netlink/genetlink.c:746
netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline]
netlink_unicast+0x537/0x740 net/netlink/af_netlink.c:1329
netlink_sendmsg+0x882/0xe10 net/netlink/af_netlink.c:1918
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:672
____sys_sendmsg+0x6e6/0x810 net/socket.c:2352
___sys_sendmsg+0x100/0x170 net/socket.c:2406
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2439
do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295
entry_SYSCALL_64_after_hwframe+0x49/0xb3
RIP: 0033:0x45ca29
Code: 0d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007effe76edc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000004fe1c0 RCX: 000000000045ca29
RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000005
RBP: 000000000078bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 000000000000094e R14: 00000000004d5d00 R15: 00007effe76ee6d4

Allocated by task 3018:
save_stack+0x1b/0x40 mm/kasan/common.c:49
set_track mm/kasan/common.c:57 [inline]
__kasan_kmalloc mm/kasan/common.c:495 [inline]
__kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:468
__do_kmalloc mm/slab.c:3656 [inline]
__kmalloc+0x161/0x7a0 mm/slab.c:3665
kmalloc include/linux/slab.h:560 [inline]
sk_prot_alloc+0x223/0x2f0 net/core/sock.c:1612
sk_alloc+0x36/0x1100 net/core/sock.c:1666
data_sock_create drivers/isdn/mISDN/socket.c:600 [inline]
mISDN_sock_create+0x272/0x400 drivers/isdn/mISDN/socket.c:796
__sock_create+0x3cb/0x730 net/socket.c:1428
sock_create net/socket.c:1479 [inline]
__sys_socket+0xef/0x200 net/socket.c:1521
__do_sys_socket net/socket.c:1530 [inline]
__se_sys_socket net/socket.c:1528 [inline]
__x64_sys_socket+0x6f/0xb0 net/socket.c:1528
do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295
entry_SYSCALL_64_after_hwframe+0x49/0xb3

Freed by task 2484:
save_stack+0x1b/0x40 mm/kasan/common.c:49
set_track mm/kasan/common.c:57 [inline]
kasan_set_free_info mm/kasan/common.c:317 [inline]
__kasan_slab_free+0xf7/0x140 mm/kasan/common.c:456
__cache_free mm/slab.c:3426 [inline]
kfree+0x109/0x2b0 mm/slab.c:3757
kvfree+0x42/0x50 mm/util.c:603
__free_fdtable+0x2d/0x70 fs/file.c:31
put_files_struct fs/file.c:420 [inline]
put_files_struct+0x248/0x2e0 fs/file.c:413
exit_files+0x7e/0xa0 fs/file.c:445
do_exit+0xb04/0x2dd0 kernel/exit.c:791
do_group_exit+0x125/0x340 kernel/exit.c:894
get_signal+0x47b/0x24e0 kernel/signal.c:2739
do_signal+0x81/0x2240 arch/x86/kernel/signal.c:784
exit_to_usermode_loop+0x26c/0x360 arch/x86/entry/common.c:161
prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline]
syscall_return_slowpath arch/x86/entry/common.c:279 [inline]
do_syscall_64+0x6b1/0x7d0 arch/x86/entry/common.c:305
entry_SYSCALL_64_after_hwframe+0x49/0xb3

The buggy address belongs to the object at ffff88808ed0c000
which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 1424 bytes inside of
2048-byte region [ffff88808ed0c000, ffff88808ed0c800)
The buggy address belongs to the page:
page:ffffea00023b4300 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0
flags: 0xfffe0000000200(slab)
raw: 00fffe0000000200 ffffea0002838208 ffffea00015ba288 ffff8880aa000e00
raw: 0000000000000000 ffff88808ed0c000 0000000100000001 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
ffff88808ed0c480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff88808ed0c500: 00 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88808ed0c580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff88808ed0c600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88808ed0c680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc

Fixes: 6b9f34239b00 ("l2tp: fix races in tunnel creation")
Fixes: fd558d186df2 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: James Chapman <jchapman@katalix.com>
Cc: Guillaume Nault <gnault@redhat.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

l2tp: do not use inet_hash()/inet_unhash()

syzbot recently found a way to crash the kernel [1]

Issue here is that inet_hash() & inet_unhash() are currently
only meant to be used by TCP & DCCP, since only these protocols
provide the needed hashinfo pointer.

L2TP uses a single list (instead of a hash table)

This old bug became an issue after commit 610236587600
("bpf: Add new cgroup attach type to enable sock modifications")
since after this commit, sk_common_release() can be called
while the L2TP socket is still considered 'hashed'.

general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 PID: 7063 Comm: syz-executor654 Not tainted 5.7.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:inet_unhash+0x11f/0x770 net/ipv4/inet_hashtables.c:600
Code: 03 0f b6 04 02 84 c0 74 08 3c 03 0f 8e dd 04 00 00 48 8d 7d 08 44 8b 73 08 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 55 05 00 00 48 8d 7d 14 4c 8b 6d 08 48 b8 00 00
RSP: 0018:ffffc90001777d30 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff88809a6df940 RCX: ffffffff8697c242
RDX: 0000000000000001 RSI: ffffffff8697c251 RDI: 0000000000000008
RBP: 0000000000000000 R08: ffff88809f3ae1c0 R09: fffffbfff1514cc1
R10: ffffffff8a8a6607 R11: fffffbfff1514cc0 R12: ffff88809a6df9b0
R13: 0000000000000007 R14: 0000000000000000 R15: ffffffff873a4d00
FS:  0000000001d2b880(0000) GS:ffff8880ae600000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000006cd090 CR3: 000000009403a000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
sk_common_release+0xba/0x370 net/core/sock.c:3210
inet_create net/ipv4/af_inet.c:390 [inline]
inet_create+0x966/0xe00 net/ipv4/af_inet.c:248
__sock_create+0x3cb/0x730 net/socket.c:1428
sock_create net/socket.c:1479 [inline]
__sys_socket+0xef/0x200 net/socket.c:1521
__do_sys_socket net/socket.c:1530 [inline]
__se_sys_socket net/socket.c:1528 [inline]
__x64_sys_socket+0x6f/0xb0 net/socket.c:1528
do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295
entry_SYSCALL_64_after_hwframe+0x49/0xb3
RIP: 0033:0x441e29
Code: e8 fc b3 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007ffdce184148 EFLAGS: 00000246 ORIG_RAX: 0000000000000029
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000441e29
RDX: 0000000000000073 RSI: 0000000000000002 RDI: 0000000000000002
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000402c30 R14: 0000000000000000 R15: 0000000000000000
Modules linked in:
---[ end trace 23b6578228ce553e ]---
RIP: 0010:inet_unhash+0x11f/0x770 net/ipv4/inet_hashtables.c:600
Code: 03 0f b6 04 02 84 c0 74 08 3c 03 0f 8e dd 04 00 00 48 8d 7d 08 44 8b 73 08 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 55 05 00 00 48 8d 7d 14 4c 8b 6d 08 48 b8 00 00
RSP: 0018:ffffc90001777d30 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff88809a6df940 RCX: ffffffff8697c242
RDX: 0000000000000001 RSI: ffffffff8697c251 RDI: 0000000000000008
RBP: 0000000000000000 R08: ffff88809f3ae1c0 R09: fffffbfff1514cc1
R10: ffffffff8a8a6607 R11: fffffbfff1514cc0 R12: ffff88809a6df9b0
R13: 0000000000000007 R14: 0000000000000000 R15: ffffffff873a4d00
FS:  0000000001d2b880(0000) GS:ffff8880ae600000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000006cd090 CR3: 000000009403a000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Fixes: 0d76751fad77 ("l2tp: Add L2TPv3 IP encapsulation (no UDP) support")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: James Chapman <jchapman@katalix.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Reported-by: syzbot+3610d489778b57cc8031@syzkaller.appspotmail.com

net: qrtr: Allocate workqueue before kernel_bind

A null pointer dereference in qrtr_ns_data_ready() is seen if a client
opens a qrtr socket before qrtr_ns_init() can bind to the control port.
When the control port is bound, the ENETRESET error will be broadcasted
and clients will close their sockets. This results in DEL_CLIENT
packets being sent to the ns and qrtr_ns_data_ready() being called
without the workqueue being allocated.

Allocate the workqueue before setting sk_data_ready and binding to the
control port. This ensures that the work and workqueue structs are
allocated and initialized before qrtr_ns_data_ready can be called.

Fixes: 0c2204a4ad71 ("net: qrtr: Migrate nameservice to kernel from userspace")
Signed-off-by: Chris Lew <clew@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'mptcp-a-bunch-of-fixes'

Paolo Abeni says:

====================
mptcp: a bunch of fixes

This patch series pulls together a few bugfixes for MPTCP bug observed while
doing stress-test with apache bench - forced to use MPTCP and multiple
subflows.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp: remove msk from the token container at destruction time.

Currently we remote the msk from the token container only
via mptcp_close(). The MPTCP master socket can be destroyed
also via other paths (e.g. if not yet accepted, when shutting
down the listener socket). When we hit the latter scenario,
dangling msk references are left into the token container,
leading to memory corruption and/or UaF.

This change addresses the issue by moving the token removal
into the msk destructor.

Fixes: 79c0949e9a09 ("mptcp: Add key generation and token tree")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp: fix race between MP_JOIN and close

If a MP_JOIN subflow completes the 3whs while another
CPU is closing the master msk, we can hit the
following race:

CPU1                                    CPU2

close()
mptcp_close
                                        subflow_syn_recv_sock
                                         mptcp_token_get_sock
                                         mptcp_finish_join
                                          inet_sk_state_load
  mptcp_token_destroy
  inet_sk_state_store(TCP_CLOSE)
  __mptcp_flush_join_list()
                                          mptcp_sock_graft
                                          list_add_tail
  sk_common_release
   sock_orphan()
<socket free>

The MP_JOIN socket will be leaked. Additionally we can hit
UaF for the msk 'struct socket' referenced via the 'conn'
field.

This change try to address the issue introducing some
synchronization between the MP_JOIN 3whs and mptcp_close
via the join_list spinlock. If we detect the msk is closing
the MP_JOIN socket is closed, too.

Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp: fix unblocking connect()

Currently unblocking connect() on MPTCP sockets fails frequently.
If mptcp_stream_connect() is invoked to complete a previously
attempted unblocking connection, it will still try to create
the first subflow via __mptcp_socket_create(). If the 3whs is
completed and the 'can_ack' flag is already set, the latter
will fail with -EINVAL.

This change addresses the issue checking for pending connect and
delegating the completion to the first subflow. Additionally
do msk addresses and sk_state changes only when needed.

Fixes: 2303f994b3e1 ("mptcp: Associate MPTCP context with TCP socket")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/sched: act_ct: add nat mangle action only for NAT-conntrack

Currently add nat mangle action with comparing invert and orig tuple.
It is better to check IPS_NAT_MASK flags first to avoid non necessary
memcmp for non-NAT conntrack.

Signed-off-by: wenxu <wenxu@ucloud.cn>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

devinet: fix memleak in inetdev_init()

When devinet_sysctl_register() failed, the memory allocated
in neigh_parms_alloc() should be freed.

Fixes: 20e61da7ffcf ("ipv4: fail early when creating netdev named all or default")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

virtio_vsock: Fix race condition in virtio_transport_recv_pkt

When client on the host tries to connect(SOCK_STREAM, O_NONBLOCK) to the
server on the guest, there will be a panic on a ThunderX2 (armv8a server):

[  463.718844] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[  463.718848] Mem abort info:
[  463.718849]   ESR = 0x96000044
[  463.718852]   EC = 0x25: DABT (current EL), IL = 32 bits
[  463.718853]   SET = 0, FnV = 0
[  463.718854]   EA = 0, S1PTW = 0
[  463.718855] Data abort info:
[  463.718856]   ISV = 0, ISS = 0x00000044
[  463.718857]   CM = 0, WnR = 1
[  463.718859] user pgtable: 4k pages, 48-bit VAs, pgdp=0000008f6f6e9000
[  463.718861] [0000000000000000] pgd=0000000000000000
[  463.718866] Internal error: Oops: 96000044 [#1] SMP
[...]
[  463.718977] CPU: 213 PID: 5040 Comm: vhost-5032 Tainted: G           O      5.7.0-rc7+ #139
[  463.718980] Hardware name: GIGABYTE R281-T91-00/MT91-FS1-00, BIOS F06 09/25/2018
[  463.718982] pstate: 60400009 (nZCv daif +PAN -UAO)
[  463.718995] pc : virtio_transport_recv_pkt+0x4c8/0xd40 [vmw_vsock_virtio_transport_common]
[  463.718999] lr : virtio_transport_recv_pkt+0x1fc/0xd40 [vmw_vsock_virtio_transport_common]
[  463.719000] sp : ffff80002dbe3c40
[...]
[  463.719025] Call trace:
[  463.719030]  virtio_transport_recv_pkt+0x4c8/0xd40 [vmw_vsock_virtio_transport_common]
[  463.719034]  vhost_vsock_handle_tx_kick+0x360/0x408 [vhost_vsock]
[  463.719041]  vhost_worker+0x100/0x1a0 [vhost]
[  463.719048]  kthread+0x128/0x130
[  463.719052]  ret_from_fork+0x10/0x18

The race condition is as follows:
Task1                                Task2
=====                                =====
__sock_release                       virtio_transport_recv_pkt
  __vsock_release                      vsock_find_bound_socket (found sk)
    lock_sock_nested
    vsock_remove_sock
    sock_orphan
      sk_set_socket(sk, NULL)
    sk->sk_shutdown = SHUTDOWN_MASK
    ...
    release_sock
                                    lock_sock
                                       virtio_transport_recv_connecting
                                         sk->sk_socket->state (panic!)

The root cause is that vsock_find_bound_socket can't hold the lock_sock,
so there is a small race window between vsock_find_bound_socket() and
lock_sock(). If __vsock_release() is running in another task,
sk->sk_socket will be set to NULL inadvertently.

This fixes it by checking sk->sk_shutdown(suggested by Stefano) after
lock_sock since sk->sk_shutdown is set to SHUTDOWN_MASK under the
protection of lock_sock_nested.

Signed-off-by: Jia He <justin.he@arm.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'powerpc-5.7-6' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

- a fix for the recent change to how we restore non-volatile GPRs,
   which broke our emulation of reading from the DSCR (Data Stream
   Control Register).

- a fix for the recent rewrite of interrupt/syscall exit in C, we need
   to exclude KCOV from that code, otherwise it can lead to
   unrecoverable faults.

Thanks to Daniel Axtens.

* tag 'powerpc-5.7-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Disable sanitisers for C syscall/interrupt entry/exit code
  powerpc/64s: Fix restore of NV GPRs after facility unavailable exception

Merge tag 'gpio-v5.7-3' of git://git./linux/kernel/git/linusw/linux-gpio

Pull GPIO fixes from Linus Walleij:
"Here are some (very) late fixes for GPIO, none of them very serious
  except the one tagged for stable for enabling IRQ on open drain lines:

   - Fix probing of mvebu chips without PWM

   - Fix error path on ida_get_simple() on the exar driver

   - Notify userspace properly about line status changes when flags are
     changed on lines.

   - Fix a sleeping while holding spinlock in the mellanox driver.

   - Fix return value of the PXA and Kona probe calls.

   - Fix IRQ locking of open drain lines, it is fine to have IRQs on
     open drain lines flagged for output"

* tag 'gpio-v5.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: fix locking open drain IRQ lines
  gpio: bcm-kona: Fix return value of bcm_kona_gpio_probe()
  gpio: pxa: Fix return value of pxa_gpio_probe()
  gpio: mlxbf2: Fix sleeping while holding spinlock
  gpiolib: notify user-space about line status changes after flags are set
  gpio: exar: Fix bad handling for ida_simple_get error path
  gpio: mvebu: Fix probing for chips without PWM

drivers/net/ibmvnic: Update VNIC protocol version reporting

VNIC protocol version is reported in big-endian format, but it
is not byteswapped before logging. Fix that, and remove version
comparison as only one protocol version exists at this time.

Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

NFC: st21nfca: add missed kfree_skb() in an error path

st21nfca_tm_send_atr_res() misses to call kfree_skb() in an error path.
Add the missed function call to fix it.

Fixes: 1892bf844ea0 ("NFC: st21nfca: Adding P2P support to st21nfca in Initiator & Target mode")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

neigh: fix ARP retransmit timer guard

In commit 19e16d220f0a ("neigh: support smaller retrans_time settting")
we add more accurate control for ARP and NS. But for ARP I forgot to
update the latest guard in neigh_timer_handler(), then the next
retransmit would be reset to jiffies + HZ/2 if we set the retrans_time
less than 500ms. Fix it by setting the time_before() check to HZ/100.

IPv6 does not have this issue.

Reported-by: Jianwen Ji <jiji@redhat.com>
Fixes: 19e16d220f0a ("neigh: support smaller retrans_time settting")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mlx5-fixes-2020-05-28' of git://git./linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5 fixes 2020-05-28

This series introduces some fixes to mlx5 driver.

v1->v2:
- Fix bad sha1, Jakub.
- Added one more patch by Pablo.
net/mlx5e: replace EINVAL in mlx5e_flower_parse_meta()

Nothing major, the only patch worth mentioning is the suspend/resume crash
fix by adding the missing pci device handlers, the fix is very straight
forward and as Dexuan already expressed, the patch is important for Azure
users to avoid crash on VM hibernation, patch is marked for -stable v4.6
below.

Conflict note:
('net/mlx5e: Fix MLX5_TC_CT dependencies') has a trivial one line conflict
with current net-next, which can be resolved by simply using the line from
net-next.

Please pull and let me know if there is any problem.

For -stable v4.6
('net/mlx5: Fix crash upon suspend/resume')

For -stable v5.6
('net/mlx5e: replace EINVAL in mlx5e_flower_parse_meta()')
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'armsoc-fixes-v5.7' of git://git./linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
"This time there is one fix for the error path in the mediatek cmdq
  driver (used by their video driver) and a couple of devicetree fixes,
  mostly for 32-bit ARM, and fairly harmless:

   - On OMAP2 there were a few regressions in the ethernet drivers, one
     of them leading to an external abort trap

   - One Raspberry Pi version had a misconfigured LED

   - Interrupts on Broadcom NSP were slightly misconfigured

   - One i.MX6q board had issues with graphics mode setting

   - On mmp3 there are some minor fixes that were submitted for v5.8
     with a cc:stable tag, so I ended up picking them up here as well

   - The Mediatek Video Codec needs to run at a higher frequency than
     configured originally"

* tag 'armsoc-fixes-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: dts: mmp3: Drop usb-nop-xceiv from HSIC phy
  ARM: dts: mmp3-dell-ariel: Fix the SPI devices
  ARM: dts: mmp3: Use the MMP3 compatible string for /clocks
  ARM: dts: bcm: HR2: Fix PPI interrupt types
  ARM: dts: bcm2835-rpi-zero-w: Fix led polarity
  ARM: dts/imx6q-bx50v3: Set display interface clock parents
  soc: mediatek: cmdq: return send msg error code
  arm64: dts: mt8173: fix vcodec-enc clock
  ARM: dts: Fix wrong mdio clock for dm814x
  ARM: dts: am437x: fix networking on boards with ksz9031 phy
  ARM: dts: am57xx: fix networking on boards with ksz9031 phy

Merge git://git./pub/scm/linux/kernel/git/bpf/bpf

Alexei Starovoitov says:

====================
pull-request: bpf 2020-05-29

The following pull-request contains BPF updates for your *net* tree.

We've added 6 non-merge commits during the last 7 day(s) which contain
a total of 4 files changed, 55 insertions(+), 34 deletions(-).

The main changes are:

1) minor verifier fix for fmod_ret progs, from Alexei.

2) af_xdp overflow check, from Bjorn.

3) minor verifier fix for 32bit assignment, from John.

4) powerpc has non-overlapping addr space, from Petr.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'ceph-for-5.7-rc8' of git://github.com/ceph/ceph-client

Pull ceph fixes from Ilya Dryomov:
"Cache tiering and cap handling fixups, both marked for stable"

* tag 'ceph-for-5.7-rc8' of git://github.com/ceph/ceph-client:
ceph: flush release queue when handling caps for unknown inode
libceph: ignore pool overlay and cache logic on redirects

Merge tag 'gfs2-v5.7-rc7.fixes' of git://git./linux/kernel/git/gfs2/linux-gfs2

Pull gfs2 fix from Andreas Gruenbacher:
"Fix the previous, flawed gfs2_find_jhead commit"

* tag 'gfs2-v5.7-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Even more gfs2_find_jhead fixes

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fix from Catalin Marinas:
"Ensure __cpu_up() returns an error if cpu_online() is false after
waiting for completion on cpu_running"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/kernel: Fix return value when cpu_online() fails in __cpu_up()

Merge branch 'parisc-5.7-2' of git://git./linux/kernel/git/deller/parisc-linux

Pull parisc fix from Helge Deller:
"Fix a kernel panic at boot time for some HP-PARISC machines"

* 'parisc-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix kernel panic in mem_init()

Merge tag 'iommu-fixes-v5.7-rc7' of git://git./linux/kernel/git/joro/iommu

Pull iommu fixes from Joerg Roedel:

- Two build fixes for issues introduced during the merge window

- A fix for a reference count leak in an error path of
   iommu_group_alloc()

* tag 'iommu-fixes-v5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu: Fix reference count leak in iommu_group_alloc.
  x86: Hide the archdata.iommu field behind generic IOMMU_API
  ia64: Hide the archdata.iommu field behind generic IOMMU_API

Merge tag 'block-5.7-2020-05-29' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
"Two small fixes:

   - Revert a block change that mixed up the return values for non-mq
     devices

   - NVMe poll race fix"

* tag 'block-5.7-2020-05-29' of git://git.kernel.dk/linux-block:
  Revert "block: end bio with BLK_STS_AGAIN in case of non-mq devs and REQ_NOWAIT"
  nvme-pci: avoid race between nvme_reap_pending_cqes() and nvme_poll()

Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma

Pull rdma fixes from Jason Gunthorpe:
"Nothing profound here, just a last set of long standing bug fixes:

   - Incorrect error unwind in qib and pvrdma

   - User triggerable NULL pointer crash in mlx5 with ODP prefetch

   - syzkaller RCU race in uverbs

   - Rare double free crash in ipoib"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  IB/ipoib: Fix double free of skb in case of multicast traffic in CM mode
  RDMA/core: Fix double destruction of uobject
  RDMA/pvrdma: Fix missing pci disable in pvrdma_pci_probe()
  RDMA/mlx5: Fix NULL pointer dereference in destroy_prefetch_work
  IB/qib: Call kobject_put() when kobject_init_and_add() fails

bpf, selftests: Add a verifier test for assigning 32bit reg states to 64bit ones

Added a verifier test for assigning 32bit reg states to
64bit where 32bit reg holds a constant value of 0.

Without previous kernel verifier.c fix, the test in
this patch will fail.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/159077335867.6014.2075350327073125374.stgit@john-Precision-5820-Tower

bpf, selftests: Verifier bounds tests need to be updated

After previous fix for zero extension test_verifier tests #65 and #66 now
fail. Before the fix we can see the alu32 mov op at insn 10

10: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0)
    R1_w=invP(id=0,
              smin_value=4294967168,smax_value=4294967423,
              umin_value=4294967168,umax_value=4294967423,
              var_off=(0x0; 0x1ffffffff),
              s32_min_value=-2147483648,s32_max_value=2147483647,
              u32_min_value=0,u32_max_value=-1)
    R10=fp0 fp-8_w=mmmmmmmm
10: (bc) w1 = w1
11: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0)
    R1_w=invP(id=0,
              smin_value=0,smax_value=2147483647,
              umin_value=0,umax_value=4294967295,
              var_off=(0x0; 0xffffffff),
              s32_min_value=-2147483648,s32_max_value=2147483647,
              u32_min_value=0,u32_max_value=-1)
    R10=fp0 fp-8_w=mmmmmmmm

After the fix at insn 10 because we have 's32_min_value < 0' the following
step 11 now has 'smax_value=U32_MAX' where before we pulled the s32_max_value
bound into the smax_value as seen above in 11 with smax_value=2147483647.

10: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0)
    R1_w=inv(id=0,
             smin_value=4294967168,smax_value=4294967423,
             umin_value=4294967168,umax_value=4294967423,
             var_off=(0x0; 0x1ffffffff),
             s32_min_value=-2147483648, s32_max_value=2147483647,
             u32_min_value=0,u32_max_value=-1)
    R10=fp0 fp-8_w=mmmmmmmm
10: (bc) w1 = w1
11: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0)
    R1_w=inv(id=0,
             smin_value=0,smax_value=4294967295,
             umin_value=0,umax_value=4294967295,
             var_off=(0x0; 0xffffffff),
             s32_min_value=-2147483648, s32_max_value=2147483647,
             u32_min_value=0, u32_max_value=-1)
    R10=fp0 fp-8_w=mmmmmmmm

The fall out of this is by the time we get to the failing instruction at
step 14 where previously we had the following:

14: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0)
    R1_w=inv(id=0,
             smin_value=72057594021150720,smax_value=72057594029539328,
             umin_value=72057594021150720,umax_value=72057594029539328,
             var_off=(0xffffffff000000; 0xffffff),
             s32_min_value=-16777216,s32_max_value=-1,
             u32_min_value=-16777216,u32_max_value=-1)
    R10=fp0 fp-8_w=mmmmmmmm
14: (0f) r0 += r1

We now have,

14: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0)
    R1_w=inv(id=0,
             smin_value=0,smax_value=72057594037927935,
             umin_value=0,umax_value=72057594037927935,
             var_off=(0x0; 0xffffffffffffff),
             s32_min_value=-2147483648,s32_max_value=2147483647,
             u32_min_value=0,u32_max_value=-1)
    R10=fp0 fp-8_w=mmmmmmmm
14: (0f) r0 += r1

In the original step 14 'smin_value=72057594021150720' this trips the logic
in the verifier function check_reg_sane_offset(),

if (smin >= BPF_MAX_VAR_OFF || smin <= -BPF_MAX_VAR_OFF) {
verbose(env, "value %lld makes %s pointer be out of bounds\n",
smin, reg_type_str[type]);
return false;
}

Specifically, the 'smin <= -BPF_MAX_VAR_OFF' check. But with the fix
at step 14 we have bounds 'smin_value=0' so the above check is not tripped
because BPF_MAX_VAR_OFF=1<<29.

We have a smin_value=0 here because at step 10 the smaller smin_value=0 means
the subtractions at steps 11 and 12 bring the smin_value negative.

11: (17) r1 -= 2147483584
12: (17) r1 -= 2147483584
13: (77) r1 >>= 8

Then the shift clears the top bit and smin_value is set to 0. Note we still
have the smax_value in the fixed code so any reads will fail. An alternative
would be to have reg_sane_check() do both smin and smax value tests.

To fix the test we can omit the 'r1 >>=8' at line 13. This will change the
err string, but keeps the intention of the test as suggseted by the title,
"check after truncation of boundary-crossing range". If the verifier logic
changes a different value is likely to be thrown in the error or the error
will no longer be thrown forcing this test to be examined. With this change
we see the new state at step 13.

13: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0)
    R1_w=invP(id=0,
              smin_value=-4294967168,smax_value=127,
              umin_value=0,umax_value=18446744073709551615,
              s32_min_value=-2147483648,s32_max_value=2147483647,
              u32_min_value=0,u32_max_value=-1)
    R10=fp0 fp-8_w=mmmmmmmm

Giving the expected out of bounds error, "value -4294967168 makes map_value
pointer be out of bounds" However, for unpriv case we see a different error
now because of the mixed signed bounds pointer arithmatic. This seems OK so
I've only added the unpriv_errstr for this. Another optino may have been to
do addition on r1 instead of subtraction but I favor the approach above
slightly.

Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/159077333942.6014.14004320043595756079.stgit@john-Precision-5820-Tower

bpf: Fix a verifier issue when assigning 32bit reg states to 64bit ones

With the latest trunk llvm (llvm 11), I hit a verifier issue for
test_prog subtest test_verif_scale1.

The following simplified example illustrate the issue:
    w9 = 0  /* R9_w=inv0 */
    r8 = *(u32 *)(r1 + 80)  /* __sk_buff->data_end */
    r7 = *(u32 *)(r1 + 76)  /* __sk_buff->data */
    ......
    w2 = w9 /* R2_w=inv0 */
    r6 = r7 /* R6_w=pkt(id=0,off=0,r=0,imm=0) */
    r6 += r2 /* R6_w=inv(id=0) */
    r3 = r6 /* R3_w=inv(id=0) */
    r3 += 14 /* R3_w=inv(id=0) */
    if r3 > r8 goto end
    r5 = *(u32 *)(r6 + 0) /* R6_w=inv(id=0) */
       <== error here: R6 invalid mem access 'inv'
    ...
  end:

In real test_verif_scale1 code, "w9 = 0" and "w2 = w9" are in
different basic blocks.

In the above, after "r6 += r2", r6 becomes a scalar, which eventually
caused the memory access error. The correct register state should be
a pkt pointer.

The inprecise register state starts at "w2 = w9".
The 32bit register w9 is 0, in __reg_assign_32_into_64(),
the 64bit reg->smax_value is assigned to be U32_MAX.
The 64bit reg->smin_value is 0 and the 64bit register
itself remains constant based on reg->var_off.

In adjust_ptr_min_max_vals(), the verifier checks for a known constant,
smin_val must be equal to smax_val. Since they are not equal,
the verifier decides r6 is a unknown scalar, which caused later failure.

The llvm10 does not have this issue as it generates different code:
    w9 = 0  /* R9_w=inv0 */
    r8 = *(u32 *)(r1 + 80)  /* __sk_buff->data_end */
    r7 = *(u32 *)(r1 + 76)  /* __sk_buff->data */
    ......
    r6 = r7 /* R6_w=pkt(id=0,off=0,r=0,imm=0) */
    r6 += r9 /* R6_w=pkt(id=0,off=0,r=0,imm=0) */
    r3 = r6 /* R3_w=pkt(id=0,off=0,r=0,imm=0) */
    r3 += 14 /* R3_w=pkt(id=0,off=14,r=0,imm=0) */
    if r3 > r8 goto end
    ...

To fix the above issue, we can include zero in the test condition for
assigning the s32_max_value and s32_min_value to their 64-bit equivalents
smax_value and smin_value.

Further, fix the condition to avoid doing zero extension bounds checks
when s32_min_value <= 0. This could allow for the case where bounds
32-bit bounds (-1,1) get incorrectly translated to (0,1) 64-bit bounds.
When in-fact the -1 min value needs to force U32_MAX bound.

Fixes: 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/159077331983.6014.5758956193749002737.stgit@john-Precision-5820-Tower

Merge tag 'mmc-v5.7-rc6' of git://git./linux/kernel/git/ulfh/mmc

Pull MMC fixes from Ulf Hansson:
"MMC core:
   - Fix use-after-free issue for rpmb partition

  MMC host:
   - Fix quirk for broken CQE support"

* tag 'mmc-v5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: block: Fix use-after-free issue for rpmb
  mmc: sdhci: Fix SDHCI_QUIRK_BROKEN_CQE

Merge tag 'sound-5.7' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"Only a few last-minute small fixes: the change in ALSA core hwdep is
  about the undefined behavior of bit shift, which is almost harmless
  but still worth to pick up quickly.

  The rest are all device-specific fixes for HD-audio and USB-audio, and
  safe to apply at the late stage"

* tag 'sound-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek - Add new codec supported for ALC287
  ALSA: usb-audio: Quirks for Gigabyte TRX40 Aorus Master onboard audio
  ALSA: usb-audio: mixer: volume quirk for ESS Technology Asus USB DAC
  ALSA: hda/realtek - Add a model for Thinkpad T570 without DAC workaround
  ALSA: hwdep: fix a left shifting 1 by 31 UB bug

Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux

Pull clk fixes from Stephen Boyd:
"Two fixes for the new SM8150 and SM8250 Qualcomm clk drivers to fix a
  randconfig build error and an incorrect parent mapping"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: qcom: gcc: Fix parent for gpll0_out_even
  clk: qcom: sm8250 gcc depends on QCOM_GDSC

bpf: Fix use-after-free in fmod_ret check

Fix the following issue:
[  436.749342] BUG: KASAN: use-after-free in bpf_trampoline_put+0x39/0x2a0
[  436.749995] Write of size 4 at addr ffff8881ef38b8a0 by task kworker/3:5/2243
[  436.750712]
[  436.752677] Workqueue: events bpf_prog_free_deferred
[  436.753183] Call Trace:
[  436.756483]  bpf_trampoline_put+0x39/0x2a0
[  436.756904]  bpf_prog_free_deferred+0x16d/0x3d0
[  436.757377]  process_one_work+0x94a/0x15b0
[  436.761969]
[  436.762130] Allocated by task 2529:
[  436.763323]  bpf_trampoline_lookup+0x136/0x540
[  436.763776]  bpf_check+0x2872/0xa0a8
[  436.764144]  bpf_prog_load+0xb6f/0x1350
[  436.764539]  __do_sys_bpf+0x16d7/0x3720
[  436.765825]
[  436.765988] Freed by task 2529:
[  436.767084]  kfree+0xc6/0x280
[  436.767397]  bpf_trampoline_put+0x1fd/0x2a0
[  436.767826]  bpf_check+0x6832/0xa0a8
[  436.768197]  bpf_prog_load+0xb6f/0x1350
[  436.768594]  __do_sys_bpf+0x16d7/0x3720

prog->aux->trampoline = tr should be set only when prog is valid.
Otherwise prog freeing will try to put trampoline via prog->aux->trampoline,
but it may not point to a valid trampoline.

Fixes: 6ba43b761c41 ("bpf: Attachment verification for BPF_MODIFY_RETURN")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: KP Singh <kpsingh@google.com>
Link: https://lore.kernel.org/bpf/20200529043839.15824-2-alexei.starovoitov@gmail.com

net/mlx5e: replace EINVAL in mlx5e_flower_parse_meta()

The drivers reports EINVAL to userspace through netlink on invalid meta
match. This is confusing since EINVAL is usually reserved for malformed
netlink messages. Replace it by more meaningful codes.

Fixes: 6d65bc64e232 ("net/mlx5e: Add mlx5e_flower_parse_meta support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5e: Fix MLX5_TC_CT dependencies

Change MLX5_TC_CT config dependencies to include MLX5_ESWITCH instead of
MLX5_CORE_EN && NET_SWITCHDEV, which are already required by MLX5_ESWITCH.
Without this change mlx5 fails to compile if user disables MLX5_ESWITCH
without also manually disabling MLX5_TC_CT.

Fixes: 4c3844d9e97e ("net/mlx5e: CT: Introduce connection tracking")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5e: Properly set default values when disabling adaptive moderation

Add a call to mlx5e_reset_rx/tx_moderation() when enabling/disabling
adaptive moderation, in order to select the proper default values.

In order to do so, we separate the logic of selecting the moderation values
and setting moderion mode (CQE/EQE based).

Fixes: 0088cbbc4b66 ("net/mlx5e: Enable CQE based moderation on TX CQ")
Fixes: 9908aa292971 ("net/mlx5e: CQE based moderation")
Signed-off-by: Tal Gilboa <talgi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5e: Fix arch depending casting issue in FEC

Change type of active_fec to u32 to match the type expected by
mlx5e_get_fec_mode. Copy active_fec and configured_fec values to
unsigned long before preforming bitwise manipulations.
Take the same approach when configuring FEC over 50G link modes: copy
the policy into an unsigned long and only than preform bitwise
operations.

Fixes: 2132b71f78d2 ("net/mlx5e: Advertise globaly supported FEC modes")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5e: Remove warning "devices are not on same switch HW"

On tunnel decap rule insertion, the indirect mechanism will attempt to
offload the rule on all uplink representors which will trigger the
"devices are not on same switch HW, can't offload forwarding" message
for the uplink which isn't on the same switch HW as the VF representor.

The above flow is valid and shouldn't cause warning message,
fix by removing the warning and only report this flow using extack.

Fixes: 321348475d54 ("net/mlx5e: Fix allowed tc redirect merged eswitch offload cases")
Signed-off-by: Maor Dickman <maord@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5e: Fix stats update for matchall classifier

It's bytes, packets, lastused.

Fixes: fcb64c0f5640 ("net/mlx5: E-Switch, add ingress rate support")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: Fix crash upon suspend/resume

Currently a Linux system with the mlx5 NIC always crashes upon
hibernation - suspend/resume.

Add basic callbacks so the NIC could be suspended and resumed.

Fixes: 9603b61de1ee ("mlx5: Move pci device handling from mlx5_ib to mlx5_core")
Tested-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Merge branch 'master' of git://git./linux/kernel/git/klassert/ipsec

Steffen Klassert says:

====================
pull request (net): ipsec 2020-05-29

1) Several fixes for ESP gro/gso in transport and beet mode when
   IPv6 extension headers are present. From Xin Long.

2) Fix a wrong comment on XFRMA_OFFLOAD_DEV.
   From Antony Antony.

3) Fix sk_destruct callback handling on ESP in TCP encapsulation.
   From Sabrina Dubroca.

4) Fix a use after free in xfrm_output_gso when used with vxlan.
   From Xin Long.

5) Fix secpath handling of VTI when used wiuth IPCOMP.
   From Xin Long.

6) Fix an oops when deleting a x-netns xfrm interface.
   From Nicolas Dichtel.

7) Fix a possible warning on policy updates. We had a case where it was
   possible to add two policies with the same lookup keys.
   From Xin Long.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'drm-fixes-2020-05-29-1' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"A couple of amdgpu fixes and minor ingenic fixes:

  amdgpu:
   - display atomic test fix
   - Fix soft hang in display vupdate code

  ingenic:
   - fix pointer cast
   - fix crtc atomic check callback"

* tag 'drm-fixes-2020-05-29-1' of git://anongit.freedesktop.org/drm/drm:
  drm/amd/display: Fix potential integer wraparound resulting in a hang
  drm/amd/display: drop cursor position check in atomic test
  gpu/drm: Ingenic: Fix opaque pointer casted to wrong type
  gpu/drm: ingenic: Fix bogus crtc_atomic_check callback

gfs2: Even more gfs2_find_jhead fixes

Fix several issues in the previous gfs2_find_jhead fix:
* When updating @blocks_submitted, @block refers to the first block block not
  submitted yet, not the last block submitted, so fix an off-by-one error.
* We want to ensure that @blocks_submitted is far enough ahead of @blocks_read
  to guarantee that there is in-flight I/O.  Otherwise, we'll eventually end up
  waiting for pages that haven't been submitted, yet.
* It's much easier to compare the number of blocks added with the number of
  blocks submitted to limit the maximum bio size.
* Even with bio chaining, we can keep adding blocks until we reach the maximum
  bio size, as long as we stop at a page boundary.  This simplifies the logic.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Bob Peterson <rpeterso@redhat.com>

parisc: Fix kernel panic in mem_init()

The Debian kernel v5.6 triggers this kernel panic:

Kernel panic - not syncing: Bad Address (null pointer deref?)
Bad Address (null pointer deref?): Code=26 (Data memory access rights trap) at addr 0000000000000000
CPU: 0 PID: 0 Comm: swapper Not tainted 5.6.0-2-parisc64 #1 Debian 5.6.14-1
  IAOQ[0]: mem_init+0xb0/0x150
  IAOQ[1]: mem_init+0xb4/0x150
  RP(r2): start_kernel+0x6c8/0x1190
Backtrace:
  [<0000000040101ab4>] start_kernel+0x6c8/0x1190
  [<0000000040108574>] start_parisc+0x158/0x1b8

on a HP-PARISC rp3440 machine with this memory layout:
Memory Ranges:
  0) Start 0x0000000000000000 End 0x000000003fffffff Size   1024 MB
  1) Start 0x0000004040000000 End 0x00000040ffdfffff Size   3070 MB

Fix the crash by avoiding virt_to_page() and similar functions in
mem_init() until the memory zones have been fully set up.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.0+

iommu: Fix reference count leak in iommu_group_alloc.

kobject_init_and_add() takes reference even when it fails.
Thus, when kobject_init_and_add() returns an error,
kobject_put() must be called to properly clean up the kobject.

Fixes: d72e31c93746 ("iommu: IOMMU Groups")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Link: https://lore.kernel.org/r/20200527210020.6522-1-wu000273@umn.edu
Signed-off-by: Joerg Roedel <jroedel@suse.de>

gpio: fix locking open drain IRQ lines

We provided the right semantics on open drain lines being
by definition output but incidentally the irq set up function
would only allow IRQs on lines that were "not output".

Fix the semantics to allow output open drain lines to be used
for IRQs.

Reported-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Russell King <linux@armlinux.org.uk>
Cc: stable@vger.kernel.org # v5.3+
Link: https://lore.kernel.org/r/20200527140758.162280-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

powerpc/64s: Disable sanitisers for C syscall/interrupt entry/exit code

syzkaller is picking up a bunch of crashes that look like this:

  Unrecoverable exception 380 at c00000000037ed60 (msr=8000000000001031)
  Oops: Unrecoverable exception, sig: 6 [#1]
  LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
  Modules linked in:
  CPU: 0 PID: 874 Comm: syz-executor.0 Not tainted 5.7.0-rc7-syzkaller-00016-gb0c3ba31be3e #0
  NIP:  c00000000037ed60 LR: c00000000004bac8 CTR: c000000000030990
  REGS: c0000000555a7230 TRAP: 0380   Not tainted  (5.7.0-rc7-syzkaller-00016-gb0c3ba31be3e)
  MSR:  8000000000001031 <SF,ME,IR,DR,LE>  CR: 48222882  XER: 20000000
  CFAR: c00000000004bac4 IRQMASK: 0
  GPR00: c00000000004bb68 c0000000555a74c0 c0000000024b3500 0000000000000005
  GPR04: 0000000000000000 0000000000000000 c00000000004bb88 c008000000910000
  GPR08: 00000000000b0000 c00000000004bac8 0000000000016000 c000000002503500
  GPR12: c000000000030990 c000000003190000 00000000106a5898 00000000106a0000
  GPR16: 00000000106a5890 c000000007a92000 c000000008180e00 c000000007a8f700
  GPR20: c000000007a904b0 0000000010110000 c00000000259d318 5deadbeef0000100
  GPR24: 5deadbeef0000122 c000000078422700 c000000009ee88b8 c000000078422778
  GPR28: 0000000000000001 800000000280b033 0000000000000000 c0000000555a75a0
  NIP [c00000000037ed60] __sanitizer_cov_trace_pc+0x40/0x50
  LR [c00000000004bac8] interrupt_exit_kernel_prepare+0x118/0x310
  Call Trace:
  [c0000000555a74c0] [c00000000004bb68] interrupt_exit_kernel_prepare+0x1b8/0x310 (unreliable)
  [c0000000555a7530] [c00000000000f9a8] interrupt_return+0x118/0x1c0
  --- interrupt: 900 at __sanitizer_cov_trace_pc+0x0/0x50
  ...<random previous call chain>...

This is caused by __sanitizer_cov_trace_pc() causing an SLB fault
after MSR[RI] has been cleared by __hard_EE_RI_disable(), which we
can not recover from.

Do not instrument the new syscall/interrupt entry/exit code with KCOV,
GCOV or UBSAN.

Reported-by: syzbot-ppc64 <ozlabsyz@au1.ibm.com>
Fixes: 68b34588e202 ("powerpc/64/sycall: Implement syscall entry/exit logic in C")
Signed-off-by: Daniel Axtens <dja@axtens.net>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

xfrm: fix a NULL-ptr deref in xfrm_local_error

This patch is to fix a crash:

  [ ] kasan: GPF could be caused by NULL-ptr deref or user memory access
  [ ] general protection fault: 0000 [#1] SMP KASAN PTI
  [ ] RIP: 0010:ipv6_local_error+0xac/0x7a0
  [ ] Call Trace:
  [ ]  xfrm6_local_error+0x1eb/0x300
  [ ]  xfrm_local_error+0x95/0x130
  [ ]  __xfrm6_output+0x65f/0xb50
  [ ]  xfrm6_output+0x106/0x46f
  [ ]  udp_tunnel6_xmit_skb+0x618/0xbf0 [ip6_udp_tunnel]
  [ ]  vxlan_xmit_one+0xbc6/0x2c60 [vxlan]
  [ ]  vxlan_xmit+0x6a0/0x4276 [vxlan]
  [ ]  dev_hard_start_xmit+0x165/0x820
  [ ]  __dev_queue_xmit+0x1ff0/0x2b90
  [ ]  ip_finish_output2+0xd3e/0x1480
  [ ]  ip_do_fragment+0x182d/0x2210
  [ ]  ip_output+0x1d0/0x510
  [ ]  ip_send_skb+0x37/0xa0
  [ ]  raw_sendmsg+0x1b4c/0x2b80
  [ ]  sock_sendmsg+0xc0/0x110

This occurred when sending a v4 skb over vxlan6 over ipsec, in which case
skb->protocol == htons(ETH_P_IPV6) while skb->sk->sk_family == AF_INET in
xfrm_local_error(). Then it will go to xfrm6_local_error() where it tries
to get ipv6 info from a ipv4 sk.

This issue was actually fixed by Commit 628e341f319f ("xfrm: make local
error reporting more robust"), but brought back by Commit 844d48746e4b
("xfrm: choose protocol family by skb protocol").

So to fix it, we should call xfrm6_local_error() only when skb->protocol
is htons(ETH_P_IPV6) and skb->sk->sk_family is AF_INET6.

Fixes: 844d48746e4b ("xfrm: choose protocol family by skb protocol")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

Merge branch 'fixes' of git://git./linux/kernel/git/viro/vfs into x86/urgent

Pick up FPU register dump fixes from Al Viro.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'drm-misc-fixes-2020-05-28' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

Two ingenic fixes, one for a wrong cast, the other for a typo in a
comparison

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200528110944.hanv4qgc6w7whnj3@gilmour.lan

net: be more gentle about silly gso requests coming from user

Recent change in virtio_net_hdr_to_skb() broke some packetdrill tests.

When --mss=XXX option is set, packetdrill always provide gso_type & gso_size
for its inbound packets, regardless of packet size.

if (packet->tcp && packet->mss) {
if (packet->ipv4)
gso.gso_type = VIRTIO_NET_HDR_GSO_TCPV4;
else
gso.gso_type = VIRTIO_NET_HDR_GSO_TCPV6;
gso.gso_size = packet->mss;
}

Since many other programs could do the same, relax virtio_net_hdr_to_skb()
to no longer return an error, but instead ignore gso settings.

This keeps Willem intent to make sure no malicious packet could
reach gso stack.

Note that TCP stack has a special logic in tcp_set_skb_tso_segs()
to clear gso_size for small packets.

Fixes: 6dd912f82680 ("net: check untrusted gso_size at kernel entry")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
"5 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  include/asm-generic/topology.h: guard cpumask_of_node() macro argument
  fs/binfmt_elf.c: allocate initialized memory in fill_thread_core_info()
  mm: remove VM_BUG_ON(PageSlab()) from page_mapcount()
  mm,thp: stop leaking unreleased file pages
  mm/z3fold: silence kmemleak false positives of slots

sctp: check assoc before SCTP_ADDR_{MADE_PRIM, ADDED} event

Make sure SCTP_ADDR_{MADE_PRIM,ADDED} are sent only for associations
that have been established.

These events are described in rfc6458#section-6.1
SCTP_PEER_ADDR_CHANGE:
This tag indicates that an address that is
part of an existing association has experienced a change of
state (e.g., a failure or return to service of the reachability
of an endpoint via a specific transport address).

Signed-off-by: Jonas Falkevik <jonas.falkevik@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

Pull input fixes from Dmitry Torokhov:
"Just a few random driver fixups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: synaptics - add a second working PNP_ID for Lenovo T470s
  Input: applespi - replace zero-length array with flexible-array
  Input: axp20x-pek - always register interrupt handlers
  Input: lm8333 - update contact email
  Input: synaptics-rmi4 - fix error return code in rmi_driver_probe()
  Input: synaptics-rmi4 - really fix attn_data use-after-free
  Input: i8042 - add ThinkPad S230u to i8042 reset list
  Revert "Input: i8042 - add ThinkPad S230u to i8042 nomux list"
  Input: dlink-dir685-touchkeys - fix a typo in driver name
  Input: xpad - add custom init packet for Xbox One S controllers
  Input: evdev - call input_flush_device() on release(), not flush()
  Input: i8042 - add ThinkPad S230u to i8042 nomux list
  Input: usbtouchscreen - add support for BonXeon TP
  Input: cros_ec_keyb - use cros_ec_cmd_xfer_status helper
  Input: mms114 - fix handling of mms345l
  Input: elants_i2c - support palm detection

x86/ioperm: Prevent a memory leak when fork fails

In the copy_process() routine called by _do_fork(), failure to allocate
a PID (or further along in the function) will trigger an invocation to
exit_thread(). This is done to clean up from an earlier call to
copy_thread_tls(). Naturally, the child task is passed into exit_thread(),
however during the process, io_bitmap_exit() nullifies the parent's
io_bitmap rather than the child's.

As copy_thread_tls() has been called ahead of the failure, the reference
count on the calling thread's io_bitmap is incremented as we would expect.
However, io_bitmap_exit() doesn't accept any arguments, and thus assumes
it should trash the current thread's io_bitmap reference rather than the
child's. This is pretty sneaky in practice, because in all instances but
this one, exit_thread() is called with respect to the current task and
everything works out.

A determined attacker can issue an appropriate ioctl (i.e. KDENABIO) to
get a bitmap allocated, and force a clone3() syscall to fail by passing
in a zeroed clone_args structure. The kernel handles the erroneous struct
and the buggy code path is followed, and even though the parent's reference
to the io_bitmap is trashed, the child still holds a reference and thus
the structure will never be freed.

Fix this by tweaking io_bitmap_exit() and its subroutines to accept a
task_struct argument which to operate on.

Fixes: ea5f1cd7ab49 ("x86/ioperm: Remove bitmap if all permissions dropped")
Signed-off-by: Jay Lang <jaytlang@mit.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable#@vger.kernel.org
Link: https://lkml.kernel.org/r/20200524162742.253727-1-jaytlang@mit.edu

Merge tag 'csky-for-linus-5.7-rc8' of git://github.com/c-sky/csky-linux

Pull csky fixes from Guo Ren:
"Another four fixes for csky:

   - fix req_syscall debug

   - fix abiv2 syscall_trace

   - fix preempt enable

   - clean up regs usage in entry.S"

* tag 'csky-for-linus-5.7-rc8' of git://github.com/c-sky/csky-linux:
  csky: Fixup CONFIG_DEBUG_RSEQ
  csky: Coding convention in entry.S
  csky: Fixup abiv2 syscall_trace break a4 & a5
  csky: Fixup CONFIG_PREEMPT panic

Revert "block: end bio with BLK_STS_AGAIN in case of non-mq devs and REQ_NOWAIT"

This reverts commit c58c1f83436b501d45d4050fd1296d71a9760bcb.

io_uring does do the right thing for this case, and we're still returning
-EAGAIN to userspace for the cases we don't support. Revert this change
to avoid doing endless spins of resubmits.

Cc: stable@vger.kernel.org # v5.6
Reported-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

include/asm-generic/topology.h: guard cpumask_of_node() macro argument

drivers/hwmon/amd_energy.c:195:15: error: invalid operands to binary expression ('void' and 'int')
                                        (channel - data->nr_cpus));
                                        ~~~~~~~~~^~~~~~~~~~~~~~~~~
include/asm-generic/topology.h:51:42: note: expanded from macro 'cpumask_of_node'
    #define cpumask_of_node(node)       ((void)node, cpu_online_mask)
                                               ^~~~
include/linux/cpumask.h:618:72: note: expanded from macro 'cpumask_first_and'
#define cpumask_first_and(src1p, src2p) cpumask_next_and(-1, (src1p), (src2p))
                                                                       ^~~~~

Fixes: f0b848ce6fe9 ("cpumask: Introduce cpumask_of_{node,pcibus} to replace {node,pcibus}_to_cpumask")
Fixes: 8abee9566b7e ("hwmon: Add amd_energy driver to report energy counters")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: http://lkml.kernel.org/r/20200527134623.930247-1-arnd@arndb.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/binfmt_elf.c: allocate initialized memory in fill_thread_core_info()

KMSAN reported uninitialized data being written to disk when dumping
core. As a result, several kilobytes of kmalloc memory may be written
to the core file and then read by a non-privileged user.

Reported-by: sam <sunhaoyl@outlook.com>
Signed-off-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200419100848.63472-1-glider@google.com
Link: https://github.com/google/kmsan/issues/76
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: remove VM_BUG_ON(PageSlab()) from page_mapcount()

Replace superfluous VM_BUG_ON() with comment about correct usage.

Technically reverts commit 1d148e218a0d ("mm: add VM_BUG_ON_PAGE() to
page_mapcount()"), but context lines have changed.

Function isolate_migratepages_block() runs some checks out of lru_lock
when choose pages for migration.  After checking PageLRU() it checks
extra page references by comparing page_count() and page_mapcount().
Between these two checks page could be removed from lru, freed and taken
by slab.

As a result this race triggers VM_BUG_ON(PageSlab()) in page_mapcount().
Race window is tiny.  For certain workload this happens around once a
year.

    page:ffffea0105ca9380 count:1 mapcount:0 mapping:ffff88ff7712c180 index:0x0 compound_mapcount: 0
    flags: 0x500000000008100(slab|head)
    raw: 0500000000008100 dead000000000100 dead000000000200 ffff88ff7712c180
    raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000
    page dumped because: VM_BUG_ON_PAGE(PageSlab(page))
    ------------[ cut here ]------------
    kernel BUG at ./include/linux/mm.h:628!
    invalid opcode: 0000 [#1] SMP NOPTI
    CPU: 77 PID: 504 Comm: kcompactd1 Tainted: G        W         4.19.109-27 #1
    Hardware name: Yandex T175-N41-Y3N/MY81-EX0-Y3N, BIOS R05 06/20/2019
    RIP: 0010:isolate_migratepages_block+0x986/0x9b0

The code in isolate_migratepages_block() was added in commit
119d6d59dcc0 ("mm, compaction: avoid isolating pinned pages") before
adding VM_BUG_ON into page_mapcount().

This race has been predicted in 2015 by Vlastimil Babka (see link
below).

[akpm@linux-foundation.org: comment tweaks, per Hugh]
Fixes: 1d148e218a0d ("mm: add VM_BUG_ON_PAGE() to page_mapcount()")
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/159032779896.957378.7852761411265662220.stgit@buzz
Link: https://lore.kernel.org/lkml/557710E1.6060103@suse.cz/
Link: https://lore.kernel.org/linux-mm/158937872515.474360.5066096871639561424.stgit@buzz/T/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm,thp: stop leaking unreleased file pages

When collapse_file() calls try_to_release_page(), it has already isolated
the page: so if releasing buffers happens to fail (as it sometimes does),
remember to putback_lru_page(): otherwise that page is left unreclaimable
and unfreeable, and the file extent uncollapsible.

Fixes: 99cb0dbd47a1 ("mm,thp: add read-only THP support for (non-shmem) FS")
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: <stable@vger.kernel.org> [5.4+]
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2005231837500.1766@eggly.anvils
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/z3fold: silence kmemleak false positives of slots

Kmemleak reported many leaks while under memory pressue in,

    slots = alloc_slots(pool, gfp);

which is referenced by "zhdr" in init_z3fold_page(),

    zhdr->slots = slots;

However, "zhdr" could be gone without freeing slots as the later will be
freed separately when the last "handle" off of "handles" array is freed.
It will be within "slots" which is always aligned.

  unreferenced object 0xc000000fdadc1040 (size 104):
  comm "oom04", pid 140476, jiffies 4295359280 (age 3454.970s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    z3fold_zpool_malloc+0x7b0/0xe10
    alloc_slots at mm/z3fold.c:214
    (inlined by) init_z3fold_page at mm/z3fold.c:412
    (inlined by) z3fold_alloc at mm/z3fold.c:1161
    (inlined by) z3fold_zpool_malloc at mm/z3fold.c:1735
    zpool_malloc+0x34/0x50
    zswap_frontswap_store+0x60c/0xda0
    zswap_frontswap_store at mm/zswap.c:1093
    __frontswap_store+0x128/0x330
    swap_writepage+0x58/0x110
    pageout+0x16c/0xa40
    shrink_page_list+0x1ac8/0x25c0
    shrink_inactive_list+0x270/0x730
    shrink_lruvec+0x444/0xf30
    shrink_node+0x2a4/0x9c0
    do_try_to_free_pages+0x158/0x640
    try_to_free_pages+0x1bc/0x5f0
    __alloc_pages_slowpath.constprop.60+0x4dc/0x15a0
    __alloc_pages_nodemask+0x520/0x650
    alloc_pages_vma+0xc0/0x420
    handle_mm_fault+0x1174/0x1bf0

Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vitaly Wool <vitaly.wool@konsulko.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: http://lkml.kernel.org/r/20200522220052.2225-1-cai@lca.pw
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86/dma: Fix max PFN arithmetic overflow on 32 bit systems

The intermediate result of the old term (4UL * 1024 * 1024 * 1024) is
4 294 967 296 or 0x100000000 which is no problem on 64 bit systems.
The patch does not change the later overall result of 0x100000 for
MAX_DMA32_PFN (after it has been shifted by PAGE_SHIFT). The new
calculation yields the same result, but does not require 64 bit
arithmetic.

On 32 bit systems the old calculation suffers from an arithmetic
overflow in that intermediate term in braces: 4UL aka unsigned long int
is 4 byte wide and an arithmetic overflow happens (the 0x100000000 does
not fit in 4 bytes), the in braces result is truncated to zero, the
following right shift does not alter that, so MAX_DMA32_PFN evaluates to
0 on 32 bit systems.

That wrong value is a problem in a comparision against MAX_DMA32_PFN in
the init code for swiotlb in pci_swiotlb_detect_4gb() to decide if
swiotlb should be active.  That comparison yields the opposite result,
when compiling on 32 bit systems.

This was not possible before

  1b7e03ef7570 ("x86, NUMA: Enable emulation on 32bit too")

when that MAX_DMA32_PFN was first made visible to x86_32 (and which
landed in v3.0).

In practice this wasn't a problem, unless CONFIG_SWIOTLB is active on
x86-32.

However if one has set CONFIG_IOMMU_INTEL, since

  c5a5dc4cbbf4 ("iommu/vt-d: Don't switch off swiotlb if bounce page is used")

there's a dependency on CONFIG_SWIOTLB, which was not necessarily
active before. That landed in v5.4, where we noticed it in the fli4l
Linux distribution. We have CONFIG_IOMMU_INTEL active on both 32 and 64
bit kernel configs there (I could not find out why, so let's just say
historical reasons).

The effect is at boot time 64 MiB (default size) were allocated for
bounce buffers now, which is a noticeable amount of memory on small
systems like pcengines ALIX 2D3 with 256 MiB memory, which are still
frequently used as home routers.

We noticed this effect when migrating from kernel v4.19 (LTS) to v5.4
(LTS) in fli4l and got that kernel messages for example:

  Linux version 5.4.22 (buildroot@buildroot) (gcc version 7.3.0 (Buildroot 2018.02.8)) #1 SMP Mon Nov 26 23:40:00 CET 2018
  …
  Memory: 183484K/261756K available (4594K kernel code, 393K rwdata, 1660K rodata, 536K init, 456K bss , 78272K reserved, 0K cma-reserved, 0K highmem)
  …
  PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
  software IO TLB: mapped [mem 0x0bb78000-0x0fb78000] (64MB)

The initial analysis and the suggested fix was done by user 'sourcejedi'
at stackoverflow and explicitly marked as GPLv2 for inclusion in the
Linux kernel:

  https://unix.stackexchange.com/a/520525/50007

The new calculation, which does not suffer from that overflow, is the
same as for arch/mips now as suggested by Robin Murphy.

The fix was tested by fli4l users on round about two dozen different
systems, including both 32 and 64 bit archs, bare metal and virtualized
machines.

[ bp: Massage commit message. ]

Fixes: 1b7e03ef7570 ("x86, NUMA: Enable emulation on 32bit too")
Reported-by: Alan Jenkins <alan.christopher.jenkins@gmail.com>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Link: https://unix.stackexchange.com/q/520065/50007
Link: https://web.nettworks.org/bugs/browse/FFL-2560
Link: https://lkml.kernel.org/r/20200526175749.20742-1-post@lespocky.de

bonding: Fix reference count leak in bond_sysfs_slave_add.

kobject_init_and_add() takes reference even when it fails.
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object. Previous
commit "b8eb718348b8" fixed a similar problem.

Fixes: 07699f9a7c8d ("bonding: add sysfs /slave dir for bond slave devices.")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge git://git./pub/scm/linux/kernel/git/pablo/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Uninitialized when used in __nf_conntrack_update(), from
Nathan Chancellor.

2) Comparison of unsigned expression in nf_confirm_cthelper().

3) Remove 'const' type qualifier with no effect.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

powerpc/bpf: Enable bpf_probe_read{, str}() on powerpc again

The commit 0ebeea8ca8a4d1d453a ("bpf: Restrict bpf_probe_read{, str}() only
to archs where they work") caused that bpf_probe_read{, str}() functions
were not longer available on architectures where the same logical address
might have different content in kernel and user memory mapping. These
architectures should use probe_read_{user,kernel}_str helpers.

For backward compatibility, the problematic functions are still available
on architectures where the user and kernel address spaces are not
overlapping. This is defined CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE.

At the moment, these backward compatible functions are enabled only on x86_64,
arm, and arm64. Let's do it also on powerpc that has the non overlapping
address space as well.

Fixes: 0ebeea8ca8a4 ("bpf: Restrict bpf_probe_read{, str}() only to archs where they work")
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/lkml/20200527122844.19524-1-pmladek@suse.com

Merge branch 'nvme-5.7' of git://git.infradead.org/nvme into block-5.7

Pull NVMe poll fix from Christoph.

* 'nvme-5.7' of git://git.infradead.org/nvme:
nvme-pci: avoid race between nvme_reap_pending_cqes() and nvme_poll()

arm64/kernel: Fix return value when cpu_online() fails in __cpu_up()

If boot_secondary() was successful, and cpu_online() was an error in
__cpu_up(), -EIO was returned, but 0 is returned by commit d22b115cbfbb7
("arm64/kernel: Simplify __cpu_up() by bailing out early").
Therefore, bringup_wait_for_ap() causes the primary core to wait for a
long time, which may cause boot failure.
This commit sets -EIO to return code under the same conditions.

Fixes: d22b115cbfbb ("arm64/kernel: Simplify __cpu_up() by bailing out early")
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Tested-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
Acked-by: Will Deacon <will@kernel.org>
Cc: Gavin Shan <gshan@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20200527233457.2531118-1-nobuhiro1.iwamatsu@toshiba.co.jp
[catalin.marinas@arm.com: return -EIO at the end of the function]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Merge tag 'amd-drm-fixes-5.7-2020-05-27' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

amd-drm-fixes-5.7-2020-05-27:

amdgpu:
- Display atomic test fix
- Fix soft hang in display vupdate code

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200527222700.4378-1-alexander.deucher@amd.com

csky: Fixup CONFIG_DEBUG_RSEQ

Put the rseq_syscall check point at the prologue of the syscall
will break the a0 ... a7. This will casue system call bug when
DEBUG_RSEQ is enabled.

So move it to the epilogue of syscall, but before syscall_trace.

Signed-off-by: Guo Ren <guoren@linux.alibaba.com>

csky: Coding convention in entry.S

There is no fixup or feature in the patch, we only cleanup with:

- Remove unnecessary reg used (r11, r12), just use r9 & r10 &
syscallid regs as temp useage.
- Add _TIF_SYSCALL_WORK and _TIF_WORK_MASK to gather macros.

Signed-off-by: Guo Ren <guoren@linux.alibaba.com>

csky: Fixup abiv2 syscall_trace break a4 & a5

Current implementation could destory a4 & a5 when strace, so we need to get them
from pt_regs by SAVE_ALL.

Signed-off-by: Guo Ren <guoren@linux.alibaba.com>