caif: Add missing braces to multiline if in cfctrl_linkup_request

[ Upstream commit 0c1db731bfcf3a9fd6c58132134f8b0f423552f0 ]

The indentation here implies this was meant to be a multi-line if.

Introduced several years back in commit c85c2951d4da1236e32f1858db418221e624aba5
("caif: Handle dev_queue_xmit errors.")

Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gianfar: Change default HW Tx queue scheduling mode

commit b98b8babd6e3370fadb7c6eaacb00eb2f6344a6c upstream.

This is primarily to address transmission timeout occurrences, when
multiple H/W Tx queues are being used concurrently. Because in
the priority scheduling mode the controller does not service the
Tx queues equally (but in ascending index order), Tx timeouts are
being triggered rightaway for a basic test with multiple simultaneous
connections like:
iperf -c <server_ip> -n 100M -P 8

resulting in kernel trace:
NETDEV WATCHDOG: eth1 (fsl-gianfar): transmit queue <X> timed out
------------[ cut here ]------------
WARNING: at net/sched/sch_generic.c:255
...
and controller reset during intense traffic, and possibly further
complications.

This patch changes the default H/W Tx scheduling setting (TXSCHED)
for multi-queue devices, from priority scheduling mode to a weighted
round robin mode with equal weights for all H/W Tx queues, and
addresses the issue above.

Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cciss: fix info leak in cciss_ioctl32_passthru()

commit 58f09e00ae095e46ef9edfcf3a5fd9ccdfad065e upstream.

The arg64 struct has a hole after ->buf_size which isn't cleared.  Or if
any of the calls to copy_from_user() fail then that would cause an
information leak as well.

This was assigned CVE-2013-2147.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpqarray: fix info leak in ida_locked_ioctl()

commit 627aad1c01da6f881e7f98d71fd928ca0c316b1a upstream.

The pciinfo struct has a two byte hole after ->dev_fn so stack
information could be leaked to the user.

This was assigned CVE-2013-2147.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.4.65

HID: LG: validate HID output report details

commit 0fb6bd06e06792469acc15bbe427361b56ada528 upstream.

A HID device could send a malicious output report that would cause the
lg, lg3, and lg4 HID drivers to write beyond the output report allocation
during an event, causing a heap overflow:

[  325.245240] usb 1-1: New USB device found, idVendor=046d, idProduct=c287
...
[  414.518960] BUG kmalloc-4096 (Not tainted): Redzone overwritten

Additionally, while lg2 did correctly validate the report details, it was
cleaned up and shortened.

CVE-2013-2893

Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm, memcg: give exiting processes access to memory reserves

commit 465adcf1ea7b2e49b2e0899366624f5532b64012

A memcg may livelock when oom if the process that grabs the hierarchy's
oom lock is never the first process with PF_EXITING set in the memcg's
task iteration.

The oom killer, both global and memcg, will defer if it finds an
eligible process that is in the process of exiting and it is not being
ptraced.  The idea is to allow it to exit without using memory reserves
before needlessly killing another process.

This normally works fine except in the memcg case with a large number of
threads attached to the oom memcg.  In this case, the memcg oom killer
only gets called for the process that grabs the hierarchy's oom lock;
all others end up blocked on the memcg's oom waitqueue.  Thus, if the
process that grabs the hierarchy's oom lock is never the first
PF_EXITING process in the memcg's task iteration, the oom killer is
constantly deferred without anything making progress.

The fix is to give PF_EXITING processes access to memory reserves so
that we've marked them as oom killed without any iteration.  This allows
__mem_cgroup_try_charge() to succeed so that the process may exit.  This
makes the memcg oom killer exemption for TIF_MEMDIE tasks, now
immediately granted for processes with pending SIGKILLs and those in the
exit path, to be equivalent to what is done for the global oom killer.

Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[Qiang: backported to 3.4:
 - move the changes from memcontrol.c to oom_kill.c]
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: compress: Fix compress device unregister.

commit 4028b6c4c03f213260e9290ff3a6b5439aad07ce upstream.

snd_unregister_device() should return the device type and not stream
direction.

Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Tested-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (applesmc) Check key count before proceeding

commit 5f4513864304672e6ea9eac60583eeac32e679f2 upstream.

After reports from Chris and Josh Boyer of a rare crash in applesmc,
Guenter pointed at the initialization problem fixed below. The patch
has not been verified to fix the crash, but should be applied
regardless.

Reported-by: <jwboyer@fedoraproject.org>
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: disable tests/benchmarks if accel is disabled

commit 4a1132a023eb48cf10522d84c5908d43b612c041 upstream.

The tests are only usable if the acceleration engines have
been successfully initialized.

Based on an initial patch from: Alex Ivanov <gnidorah@p0n4ik.tk>

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/dp: increase i2c-over-aux retry interval on AUX DEFER

commit 8d16f258217f2f583af1fd57c5144aa4bbe73e48 upstream.

There is no clear cut rules or specs for the retry interval, as there
are many factors that affect overall response time. Increase the
interval, and even more so on branch devices which may have limited i2c
bit rates.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reference: https://bugs.freedesktop.org/show_bug.cgi?id=60263
Tested-by: Nicolas Suzor <nic@suzor.com>
Reviewed-by: Todd Previte <tprevite@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm-snapshot: fix performance degradation due to small hash size

commit 60e356f381954d79088d0455e357db48cfdd6857 upstream.

LVM2, since version 2.02.96, creates origin with zero size, then loads
the snapshot driver and then loads the origin.  Consequently, the
snapshot driver sees the origin size zero and sets the hash size to the
lower bound 64.  Such small hash table causes performance degradation.

This patch changes it so that the hash size is determined by the size of
snapshot volume, not minimum of origin and snapshot size.  It doesn't
make sense to set the snapshot size significantly larger than the origin
size, so we do not need to take origin size into account when
calculating the hash size.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm snapshot: workaround for a false positive lockdep warning

commit 5ea330a75bd86b2b2a01d7b85c516983238306fb upstream.

The kernel reports a lockdep warning if a snapshot is invalidated because
it runs out of space.

The lockdep warning was triggered by commit 0976dfc1d0cd80a4e9dfaf87bd87
("workqueue: Catch more locking problems with flush_work()") in v3.5.

The warning is false positive.  The real cause for the warning is that
the lockdep engine treats different instances of md->lock as a single
lock.

This patch is a workaround - we use flush_workqueue instead of flush_work.
This code path is not performance sensitive (it is called only on
initialization or invalidation), thus it doesn't matter that we flush the
whole workqueue.

The real fix for the problem would be to teach the lockdep engine to treat
different instances of md->lock as separate locks.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb/core/devio.c: Don't reject control message to endpoint with wrong direction bit

commit 831abf76643555a99b80a3b54adfa7e4fa0a3259 upstream.

Trying to read data from the Pegasus Technologies NoteTaker (0e20:0101)
[1] with the Windows App (EasyNote) works natively but fails when
Windows is running under KVM (and the USB device handed to KVM).

The reason is a USB control message
 usb 4-2.2: control urb: bRequestType=22 bRequest=09 wValue=0200 wIndex=0001 wLength=0008
This goes to endpoint address 0x01 (wIndex); however, endpoint address
0x01 does not exist. There is an endpoint 0x81 though (same number,
but other direction); the app may have meant that endpoint instead.

The kernel thus rejects the IO and thus we see the failure.

Apparently, Linux is more strict here than Windows ... we can't change
the Win app easily, so that's a problem.

It seems that the Win app/driver is buggy here and the driver does not
behave fully according to the USB HID class spec that it claims to
belong to.  The device seems to happily deal with that though (and
seems to not really care about this value much).

So the question is whether the Linux kernel should filter here.
Rejecting has the risk that somewhat non-compliant userspace apps/
drivers (most likely in a virtual machine) are prevented from working.
Not rejecting has the risk of confusing an overly sensitive device with
such a transfer. Given the fact that Windows does not filter it makes
this risk rather small though.

The patch makes the kernel more tolerant: If the endpoint address in
wIndex does not exist, but an endpoint with toggled direction bit does,
it will let the transfer through. (It does NOT change the message.)

With attached patch, the app in Windows in KVM works.
 usb 4-2.2: check_ctrlrecip: process 13073 (qemu-kvm) requesting ep 01 but needs 81

I suspect this will mostly affect apps in virtual environments; as on
Linux the apps would have been adapted to the stricter handling of the
kernel. I have done that for mine[2].

[1] http://www.pegatech.com/
[2] https://sourceforge.net/projects/notetakerpen/

Signed-off-by: Kurt Garloff <kurt@garloff.de>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Fix race between ep halt and URB cancellation

commit 526867c3ca0caa2e3e846cb993b0f961c33c2abb upstream.

The halted state of a endpoint cannot be cleared over CLEAR_HALT from a
user process, because the stopped_td variable was overwritten in the
handle_stopped_endpoint() function. So the xhci_endpoint_reset() function will
refuse the reset and communication with device can not run over this endpoint.
https://bugzilla.kernel.org/show_bug.cgi?id=60699

Signed-off-by: Florian Wolter <wolly84@web.de>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Jonghwan Choi <jhbird.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Fix oops happening after address device timeout

commit 284d20552461466b04d6bfeafeb1c47a8891b591 upstream.

When a command times out, the command ring is first aborted,
and then stopped. If the command ring is empty when it is stopped
the stop event will point to next command which is not yet set.
xHCI tries to handle this next event often causing an oops.

Don't handle command completion events on stopped cmd ring if ring is
empty.

This patch should be backported to kernels as old as 3.7, that contain
the commit b92cc66c047ff7cf587b318fe377061a353c120f "xHCI: add aborting
command ring function"

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Reported-by: Giovanni <giovanni.nervi@yahoo.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Ensure a command structure points to the correct trb on the command ring

commit ec7e43e2d98173483866fe2e4e690143626b659c upstream.

If a command on the command ring needs to be cancelled before it is handled
it can be turned to a no-op operation when the ring is stopped.
We want to store the command ring enqueue pointer in the command structure
when the command in enqueued for the cancellation case.

Some commands used to store the command ring dequeue pointers instead of enqueue
(these often worked because enqueue happends to equal dequeue quite often)

Other commands correctly used the enqueue pointer but did not check if it pointed
to a valid trb or a link trb, this caused for example stop endpoint command to timeout in
xhci_stop_device() in about 2% of suspend/resume cases.

This should also solve some weird behavior happening in command cancellation cases.

This patch is based on a patch submitted by Sarah Sharp to linux-usb, but
then forgotten:
    http://marc.info/?l=linux-usb&m=136269803207465&w=2

This patch should be backported to kernels as old as 3.7, that contain
the commit b92cc66c047ff7cf587b318fe377061a353c120f "xHCI: add aborting
command ring function"

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: [BUG] main_usb.c oops on device_close move flag earlier.

commit e3eb270fab7734427dd8171a93e4946fe28674bc upstream.

The vt6656 is prone to resetting on the usb bus.

It seems there is a race condition and wpa supplicant is
trying to open the device via iw_handlers before its actually
closed at a stage that the buffers are being removed.

The device is longer considered open when the
buffers are being removed. So move ~DEVICE_FLAGS_OPENED
flag to before freeing the device buffers.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86, efi: Don't map Boot Services on i386

commit 700870119f49084da004ab588ea2b799689efaf7 upstream.

Add patch to fix 32bit EFI service mapping (rhbz 726701)

Multiple people are reporting hitting the following WARNING on i386,

  WARNING: at arch/x86/mm/ioremap.c:102 __ioremap_caller+0x3d3/0x440()
  Modules linked in:
  Pid: 0, comm: swapper Not tainted 3.9.0-rc7+ #95
  Call Trace:
   [<c102b6af>] warn_slowpath_common+0x5f/0x80
   [<c1023fb3>] ? __ioremap_caller+0x3d3/0x440
   [<c1023fb3>] ? __ioremap_caller+0x3d3/0x440
   [<c102b6ed>] warn_slowpath_null+0x1d/0x20
   [<c1023fb3>] __ioremap_caller+0x3d3/0x440
   [<c106007b>] ? get_usage_chars+0xfb/0x110
   [<c102d937>] ? vprintk_emit+0x147/0x480
   [<c1418593>] ? efi_enter_virtual_mode+0x1e4/0x3de
   [<c102406a>] ioremap_cache+0x1a/0x20
   [<c1418593>] ? efi_enter_virtual_mode+0x1e4/0x3de
   [<c1418593>] efi_enter_virtual_mode+0x1e4/0x3de
   [<c1407984>] start_kernel+0x286/0x2f4
   [<c1407535>] ? repair_env_string+0x51/0x51
   [<c1407362>] i386_start_kernel+0x12c/0x12f

Due to the workaround described in commit 916f676f8 ("x86, efi: Retain
boot service code until after switching to virtual mode") EFI Boot
Service regions are mapped for a period during boot. Unfortunately, with
the limited size of the i386 direct kernel map it's possible that some
of the Boot Service regions will not be directly accessible, which
causes them to be ioremap()'d, triggering the above warning as the
regions are marked as E820_RAM in the e820 memmap.

There are currently only two situations where we need to map EFI Boot
Service regions,

  1. To workaround the firmware bug described in 916f676f8
  2. To access the ACPI BGRT image

but since we haven't seen an i386 implementation that requires either,
this simple fix should suffice for now.

[ Added to changelog - Matt ]

Reported-by: Bryan O'Donoghue <bryan.odonoghue.lkml@nexus-software.ie>
Acked-by: Tom Zanussi <tom.zanussi@intel.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/reboot: Add quirk to make Dell C6100 use reboot=pci automatically

commit 4f0acd31c31f03ba42494c8baf6c0465150e2621 upstream.

Dell PowerEdge C6100 machines fail to completely reboot about 20% of the time.

Signed-off-by: Masoud Sharbiani <msharbiani@twitter.com>
Signed-off-by: Vinson Lee <vlee@twitter.com>
Cc: Robin Holt <holt@sgi.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Link: http://lkml.kernel.org/r/1379717947-18042-1-git-send-email-vlee@freedesktop.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.4.64

kernel-doc: bugfix - multi-line macros

commit 654784284430bf2739985914b65e09c7c35a7273 upstream.

Prior to this patch the following code breaks:

/**
 * multiline_example - this breaks kernel-doc
 */
 #define multiline_example( \
myparam)

Producing this error:

Error(somefile.h:983): cannot understand prototype: 'multiline_example( \ '

This patch fixes the issue by appending all lines ending in a blackslash
(optionally followed by whitespace), removing the backslash and any
whitespace after it prior to appending (just like the C pre-processor
would).

This fixes a break in kerel-doc introduced by the additions to rbtree.h.

Signed-off-by: Daniel Santos <daniel.santos@pobox.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sfc: Fix efx_rx_buf_offset() for recycled pages

This bug fix is only for stable branches older than 3.10.  The bug was
fixed upstream by commit 2768935a4660 ('sfc: reuse pages to avoid DMA
mapping/unmapping costs'), but that change is totally unsuitable for
stable.

Commit b590ace09d51 ('sfc: Fix efx_rx_buf_offset() in the presence of
swiotlb') added an explicit page_offset member to struct
efx_rx_buffer, which must be set consistently with the u.page and
dma_addr fields.  However, it failed to add the necessary assignment
in efx_resurrect_rx_buffer().  It also did not correct the calculation
of efx_rx_buffer::dma_addr in efx_resurrect_rx_buffer(), which assumes
that DMA-mapping a page will result in a page-aligned DMA address
(exactly what swiotlb violates).

Add the assignment of efx_rx_buffer::page_offset and change the
calculation of dma_addr to make use of it.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Acked-by: David Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf tools: Handle JITed code in shared memory

commit 89365e6c9ad4c0e090e4c6a4b67a3ce319381d89 upstream.

Need to check for /dev/zero.

Most likely more strings are missing too.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1366848182-30449-1-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Vinson Lee <vlee@freedesktop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fanotify: dont merge permission events

commit 03a1cec1f17ac1a6041996b3e40f96b5a2f90e1b upstream.

Boyd Yang reported a problem for the case that multiple threads of the same
thread group are waiting for a reponse for a permission event.
In this case it is possible that some of the threads are never woken up, even
if the response for the event has been received
(see http://marc.info/?l=linux-kernel&m=131822913806350&w=2).

The reason is that we are currently merging permission events if they belong to
the same thread group. But we are not prepared to wake up more than one waiter
for each event. We do

wait_event(group->fanotify_data.access_waitq, event->response ||
atomic_read(&group->fanotify_data.bypass_perm));
and after that
  event->response = 0;

which is the reason that even if we woke up all waiters for the same event
some of them may see event->response being already set 0 again, then go back to
sleep and block forever.

With this patch we avoid that more than one thread is waiting for a response
by not merging permission events for the same thread group any more.

Reported-by: Boyd Yang <boyd.yang@gmail.com>
Signed-off-by: Lino Sanfilippo <LinoSanfilipp@gmx.de>
Signed-off-by: Eric Paris <eparis@redhat.com>
Cc: Mihai Donțu <mihai.dontu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf: Fix perf_cgroup_switch for sw-events

commit 95cf59ea72331d0093010543b8951bb43f262cac upstream.

Jiri reported that he could trigger the WARN_ON_ONCE() in
perf_cgroup_switch() using sw-events. This is because sw-events share
a cpuctx with multiple PMUs.

Use the ->unique_pmu pointer to limit the pmu iteration to unique
cpuctx instances.

Reported-and-Tested-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-so7wi2zf3jjzrwcutm2mkz0j@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf: Clarify perf_cpu_context::active_pmu usage by renaming it to ::unique_pmu

commit 3f1f33206c16c7b3839d71372bc2ac3f305aa802 upstream.

Stephane thought the perf_cpu_context::active_pmu name confusing and
suggested using 'unique_pmu' instead.

This pointer is a pointer to a 'random' pmu sharing the cpuctx
instance, therefore limiting a for_each_pmu loop to those where
cpuctx->unique_pmu matches the pmu we get a loop over unique cpuctx
instances.

Suggested-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-kxyjqpfj2fn9gt7kwu5ag9ks@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cgroup: fail if monitored file and event_control are in different cgroup

commit f169007b2773f285e098cb84c74aac0154d65ff7 upstream.

If we pass fd of memory.usage_in_bytes of cgroup A to cgroup.event_control
of cgroup B, then we won't get memory usage notification from A but B!

What's worse, if A and B are in different mount hierarchy, we'll end up
accessing NULL pointer!

Disallow this kind of invalid usage.

Signed-off-by: Li Zefan <lizefan@huawei.com>
Acked-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Weng Meiling <wengmeiling.weng@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon/atom: workaround vbios bug in transmitter table on rs880 (v2)

commit 91f3a6aaf280294b07c05dfe606e6c27b7ba3c72 upstream.

The OUTPUT_ENABLE action jumps past the point in the coder where
the data_offset is set on certain rs780 cards.  This worked
previously because the OUTPUT_ENABLE action is always called
immediately after the ENABLE action so the data_offset remained
set.  In 6f8bbaf568c7f2c497558bfd04654c0b9841ad57
(drm/radeon/atom: initialize more atom interpretor elements to 0),
we explictly reset data_offset to 0 between atom calls which then
caused this to fail.  The fix is to just skip calling the
OUTPUT_ENABLE action on the problematic chipsets.  The ENABLE
action does the same thing and more.  Ultimately, we could
probably drop the OUTPUT_ENABLE action all together on DCE3
asics.

fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=60791

v2: only rs880 seems to be affected

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: fix handling of variable sized arrays for router objects

commit fb93df1c2d8b3b1fb16d6ee9e32554e0c038815d upstream.

The table has the following format:

typedef struct _ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT         //usSrcDstTableOffset pointing to this structure
{
  UCHAR               ucNumberOfSrc;
  USHORT              usSrcObjectID[1];
  UCHAR               ucNumberOfDst;
  USHORT              usDstObjectID[1];
}ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT;

usSrcObjectID[] and usDstObjectID[] are variably sized, so we
can't access them directly.  Use pointers and update the offset
appropriately when accessing the Dst members.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: fix resume on some rs4xx boards (v2)

commit acf88deb8ddbb73acd1c3fa32fde51af9153227f upstream.

Setting MC_MISC_CNTL.GART_INDEX_REG_EN causes hangs on
some boards on resume.  The systems seem to work fine
without touching this bit so leave it as is.

v2: read-modify-write the GART_INDEX_REG_EN bit.
I suspect the problem is that we are losing the other
settings in the register.

fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=52952

Reported-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Daniel Tobias <dan.g.tob@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: update line buffer allocation for dce6

commit 290d24576ccf1aa0373d2185cedfe262d0d4952a upstream.

We need to allocate line buffer to each display when
setting up the watermarks.  Failure to do so can lead
to a blank screen.  This fixes blank screen problems
on dce6 asics.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=64850

Based on an initial fix from:
Jay Cornwall <jay.cornwall@amd.com>

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: update line buffer allocation for dce4.1/5

commit 0b31e02363b0db4e7931561bc6c141436e729d9f upstream.

We need to allocate line buffer to each display when
setting up the watermarks.  Failure to do so can lead
to a blank screen.  This fixes blank screen problems
on dce4.1/5 asics.

Based on an initial fix from:
Jay Cornwall <jay.cornwall@amd.com>

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: fix endian bugs in hw i2c atom routines

commit 4543eda52113d1e2cc0e9bf416f79597e6ef1ec7 upstream.

Need to swap the data fetched over i2c properly.  This
is the same fix as the endian fix for aux channel
transactions.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: fix LCD record parsing

commit 95663948ba22a4be8b99acd67fbf83e86ddffba4 upstream.

If the LCD table contains an EDID record, properly account
for the edid size when walking through the records.

This should fix error messages about unknown LCD records.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/ttm: fix the tt_populated check in ttm_tt_destroy()

commit 182b17c8dc4e83aab000ce86587b6810e515da87 upstream.

After a vmalloc failure in ttm_dma_tt_alloc_page_directory(),
ttm_dma_tt_init() will call ttm_tt_destroy() to cleanup, and end up
inside the driver's unpopulate() hook when populate() has never yet
been called.

On nouveau, the first issue to be hit because of this is that
dma_address[] may be a NULL pointer.  After working around this,
ttm_pool_unpopulate() may potentially hit the same issue with
the pages[] array.

It seems to make more sense to avoid calling unpopulate on already
unpopulated TTMs than to add checks to all the implementations.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: logitech-dj: validate output report details

commit 297502abb32e225fb23801fcdb0e4f6f8e17099a upstream.

A HID device could send a malicious output report that would cause the
logitech-dj HID driver to leak kernel memory contents to the device, or
trigger a NULL dereference during initialization:

[  304.424553] usb 1-1: New USB device found, idVendor=046d, idProduct=c52b
...
[  304.780467] BUG: unable to handle kernel NULL pointer dereference at 0000000000000028
[  304.781409] IP: [<ffffffff815d50aa>] logi_dj_recv_send_report.isra.11+0x1a/0x90

CVE-2013-2895

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: zeroplus: validate output report details

commit 78214e81a1bf43740ce89bb5efda78eac2f8ef83 upstream.

The zeroplus HID driver was not checking the size of allocated values
in fields it used. A HID device could send a malicious output report
that would cause the driver to write beyond the output report allocation
during initialization, causing a heap overflow:

[ 1442.728680] usb 1-1: New USB device found, idVendor=0c12, idProduct=0005
...
[ 1466.243173] BUG kmalloc-192 (Tainted: G        W   ): Redzone overwritten

CVE-2013-2889

Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: provide a helper for validating hid reports

commit 331415ff16a12147d57d5c953f3a961b7ede348b upstream.

Many drivers need to validate the characteristics of their HID report
during initialization to avoid misusing the reports. This adds a common
helper to perform validation of the report exisitng, the field existing,
and the expected number of values within the field.

Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/fair: Fix small race where child->se.parent,cfs_rq might point to invalid ones

commit 6c9a27f5da9609fca46cb2b183724531b48f71ad upstream.

There is a small race between copy_process() and cgroup_attach_task()
where child->se.parent,cfs_rq points to invalid (old) ones.

        parent doing fork()      | someone moving the parent to another cgroup
  -------------------------------+---------------------------------------------
    copy_process()
      + dup_task_struct()
        -> parent->se is copied to child->se.
           se.parent,cfs_rq of them point to old ones.

                                     cgroup_attach_task()
                                       + cgroup_task_migrate()
                                         -> parent->cgroup is updated.
                                       + cpu_cgroup_attach()
                                         + sched_move_task()
                                           + task_move_group_fair()
                                             +- set_task_rq()
                                                -> se.parent,cfs_rq of parent
                                                   are updated.

      + cgroup_fork()
        -> parent->cgroup is copied to child->cgroup. (*1)
      + sched_fork()
        + task_fork_fair()
          -> se.parent,cfs_rq of child are accessed
             while they point to old ones. (*2)

In the worst case, this bug can lead to "use-after-free" and cause a panic,
because it's new cgroup's refcount that is incremented at (*1),
so the old cgroup(and related data) can be freed before (*2).

In fact, a panic caused by this bug was originally caught in RHEL6.4.

    BUG: unable to handle kernel NULL pointer dereference at (null)
    IP: [<ffffffff81051e3e>] sched_slice+0x6e/0xa0
    [...]
    Call Trace:
     [<ffffffff81051f25>] place_entity+0x75/0xa0
     [<ffffffff81056a3a>] task_fork_fair+0xaa/0x160
     [<ffffffff81063c0b>] sched_fork+0x6b/0x140
     [<ffffffff8106c3c2>] copy_process+0x5b2/0x1450
     [<ffffffff81063b49>] ? wake_up_new_task+0xd9/0x130
     [<ffffffff8106d2f4>] do_fork+0x94/0x460
     [<ffffffff81072a9e>] ? sys_wait4+0xae/0x100
     [<ffffffff81009598>] sys_clone+0x28/0x30
     [<ffffffff8100b393>] stub_clone+0x13/0x20
     [<ffffffff8100b072>] ? system_call_fastpath+0x16/0x1b

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/039601ceae06$733d3130$59b79390$@mxp.nes.nec.co.jp
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rt2800: fix wrong TX power compensation

commit 6e956da2027c767859128b9bfef085cf2a8e233b upstream.

We should not do temperature compensation on devices without
EXTERNAL_TX_ALC bit set (called DynamicTxAgcControl on vendor driver).
Such devices can have totally bogus TSSI parameters on the EEPROM,
but still threaded by us as valid and result doing wrong TX power
calculations.

This fix inability to connect to AP on slightly longer distance on
some Ralink chips/devices.

Reported-and-tested-by: Fabien ADAM <id2ndr@crocobox.org>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: usb: cdc_ether: Use wwan interface for Telit modules

commit 0092820407901a0b2c4e343e85f96bb7abfcded1 upstream.

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "sctp: fix call to SCTP_CMD_PROCESS_SACK in sctp_cmd_interpreter()"

This reverts commit c2f5b7507ac5d808f29287d77ee6148358d7fbfe which is
commit f6e80abeab928b7c47cc1fbf53df13b4398a2bec.

Michal writes:
Mainline commit f6e80abe was introduced in v3.7-rc2 as a
follow-up fix to commit

  edfee033  sctp: check src addr when processing SACK to update transport state

(from v3.7-rc1) which changed the interpretation of third
argument to sctp_cmd_process_sack() and sctp_outq_sack(). But as
commit edfee033 has never been backported to stable branches,
backport of commit f6e80abe actually breaks the code rather than
fixing it.

Reported-by: Michal Kubecek <mkubecek@suse.cz>
Cc: Zijie Pan <zijie.pan@6wind.com>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.4.63

fuse: invalidate inode attributes on xattr modification

commit d331a415aef98717393dda0be69b7947da08eba3 upstream.

Calls like setxattr and removexattr result in updation of ctime.
Therefore invalidate inode attributes to force a refresh.

Signed-off-by: Anand Avati <avati@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: postpone end_page_writeback() in fuse_writepage_locked()

commit 4a4ac4eba1010ef9a804569058ab29e3450c0315 upstream.

The patch fixes a race between ftruncate(2), mmap-ed write and write(2):

1) An user makes a page dirty via mmap-ed write.
2) The user performs shrinking truncate(2) intended to purge the page.
3) Before fuse_do_setattr calls truncate_pagecache, the page goes to
   writeback. fuse_writepage_locked fills FUSE_WRITE request and releases
   the original page by end_page_writeback.
4) fuse_do_setattr() completes and successfully returns. Since now, i_mutex
   is free.
5) Ordinary write(2) extends i_size back to cover the page. Note that
   fuse_send_write_pages do wait for fuse writeback, but for another
   page->index.
6) fuse_writepage_locked proceeds by queueing FUSE_WRITE request.
   fuse_send_writepage is supposed to crop inarg->size of the request,
   but it doesn't because i_size has already been extended back.

Moving end_page_writeback to the end of fuse_writepage_locked fixes the
race because now the fact that truncate_pagecache is successfully returned
infers that fuse_writepage_locked has already called end_page_writeback.
And this, in turn, infers that fuse_flush_writepages has already called
fuse_send_writepage, and the latter used valid (shrunk) i_size. write(2)
could not extend it because of i_mutex held by ftruncate(2).

Signed-off-by: Maxim Patlasov <mpatlasov@parallels.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

of: Fix missing memory initialization on FDT unflattening

commit 0640332e073be9207f0784df43595c0c39716e42 upstream.

Any calls to dt_alloc() need to be zeroed. This is a temporary fix, but
the allocation function itself needs to zero memory before returning
it. This is a follow up to patch 9e4012752, "of: fdt: fix memory
initialization for expanded DT" which fixed one call site but missed
another.

Signed-off-by: Grant Likely <grant.likely@linaro.org>
Acked-by: Wladislav Wiebe <wladislav.kw@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: tmio_mmc_dma: fix PIO fallback on SDHI

commit f936f9b67b7f8c2eae01dd303a0e90bd777c4679 upstream.

I'm testing SH-Mobile SDHI driver in DMA mode with  a new DMA controller  using
'bonnie++' and getting DMA error after which the tmio_mmc_dma.c code falls back
to PIO but all commands time out after that.  It turned out that the fallback
code calls tmio_mmc_enable_dma() with RX/TX channels already freed and pointers
to them cleared, so that the function bails out early instead  of clearing the
DMA bit in the CTL_DMA_ENABLE register. The regression was introduced by commit
162f43e31c5a376ec16336e5d0ac973373d54c89 (mmc: tmio: fix a deadlock).
Moving tmio_mmc_enable_dma() calls to the top of the PIO fallback code in
tmio_mmc_start_dma_{rx|tx}() helps.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/edid: add quirk for Medion MD30217PG

commit 118bdbd86b39dbb843155054021d2c59058f1e05 upstream.

This LCD monitor (1280x1024 native) has a completely
bogus detailed timing (640x350@70hz).  User reports that
1280x1024@60 has waves so prefer 1280x1024@75.

Manufacturer: MED  Model: 7b8  Serial#: 99188
Year: 2005  Week: 5
EDID Version: 1.3
Analog Display Input,  Input Voltage Level: 0.700/0.700 V
Sync:  Separate
Max Image Size [cm]: horiz.: 34  vert.: 27
Gamma: 2.50
DPMS capabilities: Off; RGB/Color Display
First detailed timing is preferred mode
redX: 0.645 redY: 0.348   greenX: 0.280 greenY: 0.605
blueX: 0.142 blueY: 0.071   whiteX: 0.313 whiteY: 0.329
Supported established timings:
720x400@70Hz
640x480@60Hz
640x480@72Hz
640x480@75Hz
800x600@56Hz
800x600@60Hz
800x600@72Hz
800x600@75Hz
1024x768@60Hz
1024x768@70Hz
1024x768@75Hz
1280x1024@75Hz
Manufacturer's mask: 0
Supported standard timings:
Supported detailed timing:
clock: 25.2 MHz   Image Size:  337 x 270 mm
h_active: 640  h_sync: 688  h_sync_end 784 h_blank_end 800 h_border: 0
v_active: 350  v_sync: 350  v_sync_end 352 v_blanking: 449 v_border: 0
Monitor name: MD30217PG
Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
Serial No: 501099188
EDID (in hex):
          00ffffffffffff0034a4b80774830100
          050f010368221b962a0c55a559479b24
          125054afcf00310a0101010101018180
          000000000000d60980a0205e63103060
          0200510e1100001e000000fc004d4433
          3032313750470a202020000000fd0038
          4c1e530e000a202020202020000000ff
          003530313039393138380a2020200078

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reported-by: friedrich@mailstation.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

isofs: Refuse RW mount of the filesystem instead of making it RO

commit 17b7f7cf58926844e1dd40f5eb5348d481deca6a upstream.

Refuse RW mount of isofs filesystem. So far we just silently changed it
to RO mount but when the media is writeable, block layer won't notice
this change and thus will think device is used RW and will block eject
button of the drive. That is unexpected by users because for
non-writeable media eject button works just fine.

Userspace mount(8) command handles this just fine and retries mounting
with MS_RDONLY set so userspace shouldn't see any regression.  Plus any
tool mounting isofs is likely confronted with the case of read-only
media where block layer already refuses to mount the filesystem without
MS_RDONLY set so our behavior shouldn't be anything new for it.

Reported-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/huge_memory.c: fix potential NULL pointer dereference

commit a8f531ebc33052642b4bd7b812eedf397108ce64 upstream.

In collapse_huge_page() there is a race window between releasing the
mmap_sem read lock and taking the mmap_sem write lock, so find_vma() may
return NULL.  So check the return value to avoid NULL pointer dereference.

collapse_huge_page
khugepaged_alloc_page
up_read(&mm->mmap_sem)
down_write(&mm->mmap_sem)
vma = find_vma(mm, address)

Signed-off-by: Libin <huawei.libin@huawei.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

memcg: fix multiple large threshold notifications

commit 2bff24a3707093c435ab3241c47dcdb5f16e432b upstream.

A memory cgroup with (1) multiple threshold notifications and (2) at least
one threshold >=2G was not reliable.  Specifically the notifications would
either not fire or would not fire in the proper order.

The __mem_cgroup_threshold() signaling logic depends on keeping 64 bit
thresholds in sorted order.  mem_cgroup_usage_register_event() sorts them
with compare_thresholds(), which returns the difference of two 64 bit
thresholds as an int.  If the difference is positive but has bit[31] set,
then sort() treats the difference as negative and breaks sort order.

This fix compares the two arbitrary 64 bit thresholds returning the
classic -1, 0, 1 result.

The test below sets two notifications (at 0x1000 and 0x81001000):
  cd /sys/fs/cgroup/memory
  mkdir x
  for x in 4096 2164264960; do
    cgroup_event_listener x/memory.usage_in_bytes $x | sed "s/^/$x listener:/" &
  done
  echo $$ > x/cgroup.procs
  anon_leaker 500M

v3.11-rc7 fails to signal the 4096 event listener:
  Leaking...
  Done leaking pages.

Patched v3.11-rc7 properly notifies:
  Leaking...
  4096 listener:2013:8:31:14:13:36
  Done leaking pages.

The fixed bug is old.  It appears to date back to the introduction of
memcg threshold notifications in v2.6.34-rc1-116-g2e72b6347c94 "memcg:
implement memory thresholds"

Signed-off-by: Greg Thelen <gthelen@google.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ocfs2: fix the end cluster offset of FIEMAP

commit 28e8be31803b19d0d8f76216cb11b480b8a98bec upstream.

Call fiemap ioctl(2) with given start offset as well as an desired mapping
range should show extents if possible.  However, we somehow figure out the
end offset of mapping via 'mapping_end -= cpos' before iterating the
extent records which would cause problems if the given fiemap length is
too small to a cluster size, e.g,

Cluster size 4096:
debugfs.ocfs2 1.6.3
        Block Size Bits: 12   Cluster Size Bits: 12

The extended fiemap test utility From David:
https://gist.github.com/anonymous/6172331

# dd if=/dev/urandom of=/ocfs2/test_file bs=1M count=1000
# ./fiemap /ocfs2/test_file 4096 10
start: 4096, length: 10
File /ocfs2/test_file has 0 extents:
# Logical          Physical         Length           Flags
^^^^^ <-- No extent is shown

In this case, at ocfs2_fiemap(): cpos == mapping_end == 1. Hence the
loop of searching extent records was not executed at all.

This patch remove the in question 'mapping_end -= cpos', and loops
until the cpos is larger than the mapping_end as usual.

# ./fiemap /ocfs2/test_file 4096 10
start: 4096, length: 10
File /ocfs2/test_file has 1 extents:
# Logical          Physical         Length           Flags
0: 0000000000000000 0000000056a01000 0000000006a00000 0000

Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reported-by: David Weber <wb@munzinger.de>
Tested-by: David Weber <wb@munzinger.de>
Cc: Sunil Mushran <sunil.mushran@gmail.com>
Cc: Mark Fashen <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

intel-iommu: Fix leaks in pagetable freeing

commit 3269ee0bd6686baf86630300d528500ac5b516d7 upstream.

At best the current code only seems to free the leaf pagetables and
the root.  If you're unlucky enough to have a large gap (like any
QEMU guest with more than 3G of memory), only the first chunk of leaf
pagetables are freed (plus the root).  This is a massive memory leak.
This patch re-writes the pagetable freeing function to use a
recursive algorithm and manages to not only free all the pagetables,
but does it without any apparent performance loss versus the current
broken version.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: ath79: Fix ar933x watchdog clock

commit a1191927ace7e6f827132aa9e062779eb3f11fa5 upstream.

The watchdog device on the AR933x is connected to
the AHB clock, however the current code uses the
reference clock. Due to the wrong rate, the watchdog
driver can't calculate correct register values for
a given timeout value and the watchdog unexpectedly
restarts the system.

The code uses the wrong value since the initial
commit 04225e1d227c8e68d685936ecf42ac175fec0e54
(MIPS: ath79: add AR933X specific clock init)

The patch fixes the code to use the correct clock
rate to avoid the problem.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5777/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: v4l2: added missing mutex.h include to v4l2-ctrls.h

commit a19dec6ea94c036af68c31930c1c92681f55af41 upstream.

This patch fixes following error:
include/media/v4l2-ctrls.h:193:15: error: field ‘_lock’ has incomplete type
include/media/v4l2-ctrls.h: In function ‘v4l2_ctrl_lock’:
include/media/v4l2-ctrls.h:570:2: error: implicit declaration of
function ‘mutex_lock’ [-Werror=implicit-function-declaration]
include/media/v4l2-ctrls.h: In function ‘v4l2_ctrl_unlock’:
include/media/v4l2-ctrls.h:579:2: error: implicit declaration of
function ‘mutex_unlock’ [-Werror=implicit-function-declaration]

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: usbhid: quirk for N-Trig DuoSense Touch Screen

commit 9e0bf92c223dabe0789714f8f85f6e26f8f9cda4 upstream.

The DuoSense touchscreen device causes a 10 second timeout. This fix
removes the delay.

Signed-off-by: Vasily Titskiy <qehgt0@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: check for NULL field when setting values

commit be67b68d52fa28b9b721c47bb42068f0c1214855 upstream.

Defensively check that the field to be worked on is not NULL.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: battery: don't do DMA from stack

commit 6c2794a2984f4c17a58117a68703cc7640f01c5a upstream.

Instead of using data from stack for DMA in hidinput_get_battery_property(),
allocate the buffer dynamically.

Reported-by: Richard Ryniker <ryniker@alum.mit.edu>
Reported-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: ntrig: validate feature report details

commit 875b4e3763dbc941f15143dd1a18d10bb0be303b upstream.

A HID device could send a malicious feature report that would cause the
ntrig HID driver to trigger a NULL dereference during initialization:

[57383.031190] usb 3-1: New USB device found, idVendor=1b96, idProduct=0001
...
[57383.315193] BUG: unable to handle kernel NULL pointer dereference at 0000000000000030
[57383.315308] IP: [<ffffffffa08102de>] ntrig_probe+0x25e/0x420 [hid_ntrig]

CVE-2013-2896

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: validate HID report id size

commit 43622021d2e2b82ea03d883926605bdd0525e1d1 upstream.

The "Report ID" field of a HID report is used to build indexes of
reports. The kernel's index of these is limited to 256 entries, so any
malicious device that sets a Report ID greater than 255 will trigger
memory corruption on the host:

[ 1347.156239] BUG: unable to handle kernel paging request at ffff88094958a878
[ 1347.156261] IP: [<ffffffff813e4da0>] hid_register_report+0x2a/0x8b

CVE-2013-2888

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: Fix Speedlink VAD Cezanne support for some devices

commit 06bb5219118fb098f4b0c7dcb484b28a52bf1c14 upstream.

Some devices of the "Speedlink VAD Cezanne" model need more aggressive fixing
than already done.

I made sure through testing that this patch would not interfere with the proper
working of a device that is bug-free. (The driver drops EV_REL events with
abs(val) >= 256, which are not achievable even on the highest laser resolution
hardware setting.)

Signed-off-by: Stefan Kriwanek <mail@stefankriwanek.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: pantherlord: validate output report details

commit 412f30105ec6735224535791eed5cdc02888ecb4 upstream.

A HID device could send a malicious output report that would cause the
pantherlord HID driver to write beyond the output report allocation
during initialization, causing a heap overflow:

[  310.939483] usb 1-1: New USB device found, idVendor=0e8f, idProduct=0003
...
[  315.980774] BUG kmalloc-192 (Tainted: G        W   ): Redzone overwritten

CVE-2013-2892

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath9k: avoid accessing MRC registers on single-chain devices

commit a1c781bb20ac1e03280e420abd47a99eb8bbdd3b upstream.

They are not implemented, and accessing them might trigger errors

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath9k: fix rx descriptor related race condition

commit e96542e55a2aacf4bdeccfe2f17b77c4895b4df2 upstream.

Similar to a race condition that exists in the tx path, the hardware
might re-read the 'next' pointer of a descriptor of the last completed
frame. This only affects non-EDMA (pre-AR93xx) devices.

To deal with this race, defer clearing and re-linking a completed rx
descriptor until the next one has been processed.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath9k: always clear ps filter bit on new assoc

commit 026d5b07c03458f9c0ccd19c3850564a5409c325 upstream.

Otherwise in some cases, EAPOL frames might be filtered during the
initial handshake, causing delays and assoc failures.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

brcmsmac: Fix WARNING caused by lack of calls to dma_mapping_error()

commit 67d0cf50bd32b66eab709871714e55725ee30ce4 upstream.

The driver fails to check the results of DMA mapping in twp places,
which results in the following warning:

[   28.078515] ------------[ cut here ]------------
[   28.078529] WARNING: at lib/dma-debug.c:937 check_unmap+0x47e/0x930()
[   28.078533] bcma-pci-bridge 0000:0e:00.0: DMA-API: device driver failed to check map error[device address=0x00000000b5d60d6c] [size=1876 bytes] [mapped as
 single]
[   28.078536] Modules linked in: bnep bluetooth vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) ipv6 b43 brcmsmac rtl8192cu rtl8192c_common rtlwifi mac802
11 brcmutil cfg80211 snd_hda_codec_conexant rng_core snd_hda_intel kvm_amd snd_hda_codec ssb kvm mmc_core snd_pcm snd_seq snd_timer snd_seq_device snd k8temp
 cordic joydev serio_raw hwmon sr_mod sg pcmcia pcmcia_core soundcore cdrom i2c_nforce2 i2c_core forcedeth bcma snd_page_alloc autofs4 ext4 jbd2 mbcache crc1
6 scsi_dh_alua scsi_dh_hp_sw scsi_dh_rdac scsi_dh_emc scsi_dh ata_generic pata_amd
[   28.078602] CPU: 1 PID: 2570 Comm: NetworkManager Tainted: G           O 3.10.0-rc7-wl+ #42
[   28.078605] Hardware name: Hewlett-Packard HP Pavilion dv2700 Notebook PC/30D6, BIOS F.27 11/27/2008
[   28.078607]  0000000000000009 ffff8800bbb03ad8 ffffffff8144f898 ffff8800bbb03b18
[   28.078612]  ffffffff8103e1eb 0000000000000002 ffff8800b719f480 ffff8800b7b9c010
[   28.078617]  ffffffff824204c0 ffffffff81754d57 0000000000000754 ffff8800bbb03b78
[   28.078622] Call Trace:
[   28.078624]  <IRQ>  [<ffffffff8144f898>] dump_stack+0x19/0x1b
[   28.078634]  [<ffffffff8103e1eb>] warn_slowpath_common+0x6b/0xa0
[   28.078638]  [<ffffffff8103e2c1>] warn_slowpath_fmt+0x41/0x50
[   28.078650]  [<ffffffff8122d7ae>] check_unmap+0x47e/0x930
[   28.078655]  [<ffffffff8122de4c>] debug_dma_unmap_page+0x5c/0x70
[   28.078679]  [<ffffffffa04a808c>] dma64_getnextrxp+0x10c/0x190 [brcmsmac]
[   28.078691]  [<ffffffffa04a9042>] dma_rx+0x62/0x240 [brcmsmac]
[   28.078707]  [<ffffffffa0479101>] brcms_c_dpc+0x211/0x9d0 [brcmsmac]
[   28.078717]  [<ffffffffa046d927>] ? brcms_dpc+0x27/0xf0 [brcmsmac]
[   28.078731]  [<ffffffffa046d947>] brcms_dpc+0x47/0xf0 [brcmsmac]
[   28.078736]  [<ffffffff81047dcc>] tasklet_action+0x6c/0xf0
--snip--
[   28.078974]  [<ffffffff813891bd>] SyS_sendmsg+0xd/0x20
[   28.078979]  [<ffffffff81455c24>] tracesys+0xdd/0xe2
[   28.078982] ---[ end trace 6164d1a08148e9c8 ]---
[   28.078984] Mapped at:
[   28.078985]  [<ffffffff8122c8fd>] debug_dma_map_page+0x9d/0x150
[   28.078989]  [<ffffffffa04a9322>] dma_rxfill+0x102/0x3d0 [brcmsmac]
[   28.079001]  [<ffffffffa047a13d>] brcms_c_init+0x87d/0x1100 [brcmsmac]
[   28.079010]  [<ffffffffa046d851>] brcms_init+0x21/0x30 [brcmsmac]
[   28.079018]  [<ffffffffa04786e0>] brcms_c_up+0x150/0x430 [brcmsmac]

As the patch adds a new failure mechanism to dma_rxfill(). When I changed the
comment at the start of the routine to add that information, I also polished
the wording.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Cc: Hante Meuleman <meuleman@broadcom.com>
Cc: brcm80211-dev-list@broadcom.com
Acked-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Add Toshiba Satellite C870 to MSI blacklist

commit 83f72151352791836a1b9c1542614cc9bf71ac61 upstream.

Toshiba Satellite C870 shows interrupt problems occasionally when
certain mixer controls like "Mic Switch" is toggled.  This seems
worked around by not using MSI.

Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=833585
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: wm8960: Fix PLL register writes

commit 85fa532b6ef920b32598df86b194571a7059a77c upstream.

Bit 9 of PLL2,3 and 4 is reserved as '0'. The 24bit fractional part
should be split across each register in 8bit chunks.

Signed-off-by: Mike Dyer <mike.dyer@md-soft.co.uk>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rculist: list_first_or_null_rcu() should use list_entry_rcu()

commit c34ac00caefbe49d40058ae7200bd58725cebb45 upstream.

list_first_or_null() should test whether the list is empty and return
pointer to the first entry if not in a RCU safe manner.  It's broken
in several ways.

* It compares __kernel @__ptr with __rcu @__next triggering the
  following sparse warning.

  net/core/dev.c:4331:17: error: incompatible types in comparison expression (different address spaces)

* It doesn't perform rcu_dereference*() and computes the entry address
  using container_of() directly from the __rcu pointer which is
  inconsitent with other rculist interface.  As a result, all three
  in-kernel users - net/core/dev.c, macvlan, cgroup - are buggy.  They
  dereference the pointer w/o going through read barrier.

* While ->next dereference passes through list_next_rcu(), the
  compiler is still free to fetch ->next more than once and thus
  nullify the "__ptr != __next" condition check.

Fix it by making list_first_or_null_rcu() dereference ->next directly
using ACCESS_ONCE() and then use list_entry_rcu() on it like other
rculist accessors.

v2: Paul pointed out that the compiler may fetch the pointer more than
    once nullifying the condition check.  ACCESS_ONCE() added on
    ->next dereference.

v3: Restored () around macro param which was accidentally removed.
    Spotted by Paul.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: Dipankar Sarma <dipankar@in.ibm.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: config->desc.bLength may not exceed amount of data returned by the device

commit b4f17a488ae2e09bfcf95c0e0b4219c246f1116a upstream.

While reading the config parsing code I noticed this check is missing, without
this check config->desc.wTotalLength can end up with a value larger then the
dev->rawdescriptors length for the config, and when userspace then tries to
get the rawdescriptors bad things may happen.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: cdc-wdm: fix race between interrupt handler and tasklet

commit 6dd433e6cf2475ce8abec1b467720858c24450eb upstream.

Both could want to submit the same URB. Some checks of the flag
intended to prevent that were missing.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: ehci-mxc: check for pdata before dereferencing

commit f375fc520d4df0cd9fcb570f33c103c6c0311f9e upstream.

Commit 7e8d5cd93fac ("USB: Add EHCI support for MX27 and MX31 based
boards") introduced code that could potentially lead to a NULL pointer
dereference on driver removal.

Fix this by checking for the value of pdata before dereferencing it.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: mos7720: fix big-endian control requests

commit 3b716caf190ccc6f2a09387210e0e6a26c1d81a4 upstream.

Fix endianess bugs in parallel-port code which caused corrupt
control-requests to be issued on big-endian machines.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: mos7720: use GFP_ATOMIC under spinlock

commit d0bd9a41186e076ea543c397ad8a67a6cf604b55 upstream.

The write_parport_reg_nonblock() function shouldn't sleep because it's
called with spinlocks held.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt282x: dt282x_ai_insn_read() always fails

commit 2c4283ca7cdcc6605859c836fc536fcd83a4525f upstream.

In dt282x_ai_insn_read() we call this macro like:
wait_for(!mux_busy(), comedi_error(dev, "timeout\n"); return -ETIME;);
Because the if statement doesn't have curly braces it means we always
return -ETIME and the function never succeeds.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: ensure that srv_mutex is held when dealing with ssocket pointer

commit 73e216a8a42c0ef3d08071705c946c38fdbe12b0 upstream.

Oleksii reported that he had seen an oops similar to this:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000088
IP: [<ffffffff814dcc13>] sock_sendmsg+0x93/0xd0
PGD 0
Oops: 0000 [#1] PREEMPT SMP
Modules linked in: ipt_MASQUERADE xt_REDIRECT xt_tcpudp iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack ip_tables x_tables carl9170 ath usb_storage f2fs nfnetlink_log nfnetlink md4 cifs dns_resolver hid_generic usbhid hid af_packet uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev rfcomm btusb bnep bluetooth qmi_wwan qcserial cdc_wdm usb_wwan usbnet usbserial mii snd_hda_codec_hdmi snd_hda_codec_realtek iwldvm mac80211 coretemp intel_powerclamp kvm_intel kvm iwlwifi snd_hda_intel cfg80211 snd_hda_codec xhci_hcd e1000e ehci_pci snd_hwdep sdhci_pci snd_pcm ehci_hcd microcode psmouse sdhci thinkpad_acpi mmc_core i2c_i801 pcspkr usbcore hwmon snd_timer snd_page_alloc snd ptp rfkill pps_core soundcore evdev usb_common vboxnetflt(O) vboxdrv(O)Oops#2 Part8
 loop tun binfmt_misc fuse msr acpi_call(O) ipv6 autofs4
CPU: 0 PID: 21612 Comm: kworker/0:1 Tainted: G        W  O 3.10.1SIGN #28
Hardware name: LENOVO 2306CTO/2306CTO, BIOS G2ET92WW (2.52 ) 02/22/2013
Workqueue: cifsiod cifs_echo_request [cifs]
task: ffff8801e1f416f0 ti: ffff880148744000 task.ti: ffff880148744000
RIP: 0010:[<ffffffff814dcc13>]  [<ffffffff814dcc13>] sock_sendmsg+0x93/0xd0
RSP: 0000:ffff880148745b00  EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff880148745b78 RCX: 0000000000000048
RDX: ffff880148745c90 RSI: ffff880181864a00 RDI: ffff880148745b78
RBP: ffff880148745c48 R08: 0000000000000048 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff880181864a00
R13: ffff880148745c90 R14: 0000000000000048 R15: 0000000000000048
FS:  0000000000000000(0000) GS:ffff88021e200000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000088 CR3: 000000020c42c000 CR4: 00000000001407b0
Oops#2 Part7
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Stack:
 ffff880148745b30 ffffffff810c4af9 0000004848745b30 ffff880181864a00
 ffffffff81ffbc40 0000000000000000 ffff880148745c90 ffffffff810a5aab
 ffff880148745bc0 ffffffff81ffbc40 ffff880148745b60 ffffffff815a9fb8
Call Trace:
 [<ffffffff810c4af9>] ? finish_task_switch+0x49/0xe0
 [<ffffffff810a5aab>] ? lock_timer_base.isra.36+0x2b/0x50
 [<ffffffff815a9fb8>] ? _raw_spin_unlock_irqrestore+0x18/0x40
 [<ffffffff810a673f>] ? try_to_del_timer_sync+0x4f/0x70
 [<ffffffff815aa38f>] ? _raw_spin_unlock_bh+0x1f/0x30
 [<ffffffff814dcc87>] kernel_sendmsg+0x37/0x50
 [<ffffffffa081a0e0>] smb_send_kvec+0xd0/0x1d0 [cifs]
 [<ffffffffa081a263>] smb_send_rqst+0x83/0x1f0 [cifs]
 [<ffffffffa081ab6c>] cifs_call_async+0xec/0x1b0 [cifs]
 [<ffffffffa08245e0>] ? free_rsp_buf+0x40/0x40 [cifs]
Oops#2 Part6
 [<ffffffffa082606e>] SMB2_echo+0x8e/0xb0 [cifs]
 [<ffffffffa0808789>] cifs_echo_request+0x79/0xa0 [cifs]
 [<ffffffff810b45b3>] process_one_work+0x173/0x4a0
 [<ffffffff810b52a1>] worker_thread+0x121/0x3a0
 [<ffffffff810b5180>] ? manage_workers.isra.27+0x2b0/0x2b0
 [<ffffffff810bae00>] kthread+0xc0/0xd0
 [<ffffffff810bad40>] ? kthread_create_on_node+0x120/0x120
 [<ffffffff815b199c>] ret_from_fork+0x7c/0xb0
 [<ffffffff810bad40>] ? kthread_create_on_node+0x120/0x120
Code: 84 24 b8 00 00 00 4c 89 f1 4c 89 ea 4c 89 e6 48 89 df 4c 89 60 18 48 c7 40 28 00 00 00 00 4c 89 68 30 44 89 70 14 49 8b 44 24 28 <ff> 90 88 00 00 00 3d ef fd ff ff 74 10 48 8d 65 e0 5b 41 5c 41
 RIP  [<ffffffff814dcc13>] sock_sendmsg+0x93/0xd0
 RSP <ffff880148745b00>
CR2: 0000000000000088

The client was in the middle of trying to send a frame when the
server->ssocket pointer got zeroed out. In most places, that we access
that pointer, the srv_mutex is held. There's only one spot that I see
that the server->ssocket pointer gets set and the srv_mutex isn't held.
This patch corrects that.

The upstream bug report was here:

    https://bugzilla.kernel.org/show_bug.cgi?id=60557

Reported-by: Oleksii Shevchuk <alxchk@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: xhci: Disable runtime PM suspend for quirky controllers

commit c8476fb855434c733099079063990e5bfa7ecad6 upstream.

If a USB controller with XHCI_RESET_ON_RESUME goes to runtime suspend,
a reset will be performed upon runtime resume. Any previously suspended
devices attached to the controller will be re-enumerated at this time.
This will cause problems, for example, if an open system call on the
device triggered the resume (the open call will fail).

Note that this change is only relevant when persist_enabled is not set
for USB devices.

This patch should be backported to kernels as old as 3.0, that
contain the commit c877b3b2ad5cb9d4fe523c5496185cc328ff3ae9 "xhci: Add
reset on resume quirk for asrock p67 host".

Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci-plat: Don't enable legacy PCI interrupts.

commit 52fb61250a7a132b0cfb9f4a1060a1f3c49e5a25 upstream.

The xHCI platform driver calls into usb_add_hcd to register the irq for
its platform device.  It does not want the xHCI generic driver to
register an interrupt for it at all.  The original code did that by
setting the XHCI_BROKEN_MSI quirk, which tells the xHCI driver to not
enable MSI or MSI-X for a PCI host.

Unfortunately, if CONFIG_PCI is enabled, and CONFIG_USB_DW3 is enabled,
the xHCI generic driver will attempt to register a legacy PCI interrupt
for the xHCI platform device in xhci_try_enable_msi().  This will result
in a bogus irq being registered, since the underlying device is a
platform_device, not a pci_device, and thus the pci_device->irq pointer
will be bogus.

Add a new quirk, XHCI_PLAT, so that the xHCI generic driver can
distinguish between a PCI device that can't handle MSI or MSI-X, and a
platform device that should not have its interrupts touched at all.
This quirk may be useful in the future, in case other corner cases like
this arise.

This patch should be backported to kernels as old as 3.9, that
contain the commit 00eed9c814cb8f281be6f0f5d8f45025dc0a97eb "USB: xhci:
correctly enable interrupts".

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Reported-by: Yu Y Wang <yu.y.wang@intel.com>
Tested-by: Yu Y Wang <yu.y.wang@intel.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: PCI: versatile: Fix SMAP register offsets

commit 99f2b130370b904ca5300079243fdbcafa2c708b upstream.

The SMAP register offsets in the versatile PCI controller code were
all off by four.  (This didn't have any observable bad effects
because on this board PHYS_OFFSET is zero, and (a) writing zero to
the flags register at offset 0x10 has no effect and (b) the reset
value of the SMAP register is zero anyway, so failing to write SMAP2
didn't matter.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen-gnt: prevent adding duplicate gnt callbacks

commit 5f338d9001094a56cf87bd8a280b4e7ff953bb59 upstream.

With the current implementation, the callback in the tail of the list
can be added twice, because the check done in
gnttab_request_free_callback is bogus, callback->next can be NULL if
it is the last callback in the list. If we add the same callback twice
we end up with an infinite loop, were callback == callback->next.

Replace this check with a proper one that iterates over the list to
see if the callback has already been added.

Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Matt Wilson <msw@amazon.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: Handle unaligned ldbrx/stdbrx

commit 230aef7a6a23b6166bd4003bfff5af23c9bd381f upstream.

Normally when we haven't implemented an alignment handler for
a load or store instruction the process will be terminated.

The alignment handler uses the DSISR (or a pseudo one) to locate
the right handler. Unfortunately ldbrx and stdbrx overlap lfs and
stfs so we incorrectly think ldbrx is an lfs and stdbrx is an
stfs.

This bug is particularly nasty - instead of terminating the
process we apply an incorrect fixup and continue on.

With more and more overlapping instructions we should stop
creating a pseudo DSISR and index using the instruction directly,
but for now add a special case to catch ldbrx/stdbrx.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: api - Fix race condition in larval lookup

commit 77dbd7a95e4a4f15264c333a9e9ab97ee27dc2aa upstream.

crypto_larval_lookup should only return a larval if it created one.
Any larval created by another entity must be processed through
crypto_larval_wait before being returned.

Otherwise this will lead to a larval being killed twice, which
will most likely lead to a crash.

Reported-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SCSI: sd: Fix potential out-of-bounds access

commit 984f1733fcee3fbc78d47e26c5096921c5d9946a upstream.

This patch fixes an out-of-bounds error in sd_read_cache_type(), found
by Google's AddressSanitizer tool.  When the loop ends, we know that
"offset" lies beyond the end of the data in the buffer, so no Caching
mode page was found.  In theory it may be present, but the buffer size
is limited to 512 bytes.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.4.62

Revert "KVM: X86 emulator: fix source operand decoding for 8bit mov[zs]x instructions"

This reverts commit 5b5b30580218eae22609989546bac6e44d0eda6e, which was
commit 660696d1d16a71e15549ce1bf74953be1592bcd3 upstream.

Paul Gortmaker <paul.gortmaker@windriver.com> writes:

[this patch] introduces the following:

arch/x86/kvm/emulate.c: In function ‘decode_operand’:
arch/x86/kvm/emulate.c:3974:4: warning: passing argument 1 of ‘decode_register’ makes integer from pointer
+without a cast [enabled by default]
arch/x86/kvm/emulate.c:789:14: note: expected ‘u8’ but argument is of type ‘struct x86_emulate_ctxt *’
arch/x86/kvm/emulate.c:3974:4: warning: passing argument 2 of ‘decode_register’ makes pointer from integer
+without a cast [enabled by default]
arch/x86/kvm/emulate.c:789:14: note: expected ‘long unsigned int *’ but argument is of type ‘u8’

Based on the severity of the warnings above, I'm reasonably sure there will
be some kind of runtime regressions due to this, but I stopped to investigate
the warnings as soon as I saw them, before any run time testing.

It happens because mainline v3.7-rc1~113^2~40 (dd856efafe60) does this:

-static void *decode_register(u8 modrm_reg, unsigned long *regs,
+static void *decode_register(struct x86_emulate_ctxt *ctxt, u8 modrm_reg,

Since 660696d1d16a71e1 was only applied to stable 3.4, 3.8, and 3.9 -- and
the prerequisite above is in 3.7+, the issue should be limited to 3.4.44+

Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

m32r: make memset() global for CONFIG_KERNEL_BZIP2=y

commit 9a75c6e5240f7edc5955e8da5b94bde6f96070b3 upstream.

Fix the m32r compile error:

  arch/m32r/boot/compressed/misc.c:31:14: error: static declaration of 'memset' follows non-static declaration
  make[5]: *** [arch/m32r/boot/compressed/misc.o] Error 1
  make[4]: *** [arch/m32r/boot/compressed/vmlinux] Error 2

by removing the static keyword.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

m32r: add memcpy() for CONFIG_KERNEL_GZIP=y

commit a8abbca6617e1caa2344d2d38d0a35f3e5928b79 upstream.

Fix the m32r link error:

    LD      arch/m32r/boot/compressed/vmlinux
  arch/m32r/boot/compressed/misc.o: In function `zlib_updatewindow':
  misc.c:(.text+0x190): undefined reference to `memcpy'
  misc.c:(.text+0x190): relocation truncated to fit: R_M32R_26_PLTREL against undefined symbol `memcpy'
  make[5]: *** [arch/m32r/boot/compressed/vmlinux] Error 1

by adding our own implementation of memcpy().

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

m32r: consistently use "suffix-$(...)"

commit df12aef6a19bb2d69859a94936bda0e6ccaf3327 upstream.

Commit a556bec9955c ("m32r: fix arch/m32r/boot/compressed/Makefile")
changed "$(suffix_y)" to "$(suffix-y)", but didn't update any location
where "suffix_y" is set, causing:

  make[5]: *** No rule to make target `arch/m32r/boot/compressed/vmlinux.bin.', needed by `arch/m32r/boot/compressed/piggy.o'.  Stop.
  make[4]: *** [arch/m32r/boot/compressed/vmlinux] Error 2
  make[3]: *** [zImage] Error 2

Correct the other locations to fix this.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tipc: fix lockdep warning during bearer initialization

[ Upstream commit 4225a398c1352a7a5c14dc07277cb5cc4473983b ]

When the lockdep validator is enabled, it will report the below
warning when we enable a TIPC bearer:

[ INFO: possible irq lock inversion dependency detected ]
---------------------------------------------------------
Possible interrupt unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(ptype_lock);
                                local_irq_disable();
                                lock(tipc_net_lock);
                                lock(ptype_lock);
   <Interrupt>
   lock(tipc_net_lock);

  *** DEADLOCK ***

the shortest dependencies between 2nd lock and 1st lock:
  -> (ptype_lock){+.+...} ops: 10 {
[...]
SOFTIRQ-ON-W at:
                      [<c1089418>] __lock_acquire+0x528/0x13e0
                      [<c108a360>] lock_acquire+0x90/0x100
                      [<c1553c38>] _raw_spin_lock+0x38/0x50
                      [<c14651ca>] dev_add_pack+0x3a/0x60
                      [<c182da75>] arp_init+0x1a/0x48
                      [<c182dce5>] inet_init+0x181/0x27e
                      [<c1001114>] do_one_initcall+0x34/0x170
                      [<c17f7329>] kernel_init+0x110/0x1b2
                      [<c155b6a2>] kernel_thread_helper+0x6/0x10
[...]
   ... key      at: [<c17e4b10>] ptype_lock+0x10/0x20
   ... acquired at:
    [<c108a360>] lock_acquire+0x90/0x100
    [<c1553c38>] _raw_spin_lock+0x38/0x50
    [<c14651ca>] dev_add_pack+0x3a/0x60
    [<c8bc18d2>] enable_bearer+0xf2/0x140 [tipc]
    [<c8bb283a>] tipc_enable_bearer+0x1ba/0x450 [tipc]
    [<c8bb3a04>] tipc_cfg_do_cmd+0x5c4/0x830 [tipc]
    [<c8bbc032>] handle_cmd+0x42/0xd0 [tipc]
    [<c148e802>] genl_rcv_msg+0x232/0x280
    [<c148d3f6>] netlink_rcv_skb+0x86/0xb0
    [<c148e5bc>] genl_rcv+0x1c/0x30
    [<c148d144>] netlink_unicast+0x174/0x1f0
    [<c148ddab>] netlink_sendmsg+0x1eb/0x2d0
    [<c1456bc1>] sock_aio_write+0x161/0x170
    [<c1135a7c>] do_sync_write+0xac/0xf0
    [<c11360f6>] vfs_write+0x156/0x170
    [<c11361e2>] sys_write+0x42/0x70
    [<c155b0df>] sysenter_do_call+0x12/0x38
[...]
}
  -> (tipc_net_lock){+..-..} ops: 4 {
[...]
    IN-SOFTIRQ-R at:
                     [<c108953a>] __lock_acquire+0x64a/0x13e0
                     [<c108a360>] lock_acquire+0x90/0x100
                     [<c15541cd>] _raw_read_lock_bh+0x3d/0x50
                     [<c8bb874d>] tipc_recv_msg+0x1d/0x830 [tipc]
                     [<c8bc195f>] recv_msg+0x3f/0x50 [tipc]
                     [<c146a5fa>] __netif_receive_skb+0x22a/0x590
                     [<c146ab0b>] netif_receive_skb+0x2b/0xf0
                     [<c13c43d2>] pcnet32_poll+0x292/0x780
                     [<c146b00a>] net_rx_action+0xfa/0x1e0
                     [<c103a4be>] __do_softirq+0xae/0x1e0
[...]
}

>From the log, we can see three different call chains between
CPU0 and CPU1:

Time 0 on CPU0:

  kernel_init()->inet_init()->dev_add_pack()

At time 0, the ptype_lock is held by CPU0 in dev_add_pack();

Time 1 on CPU1:

  tipc_enable_bearer()->enable_bearer()->dev_add_pack()

At time 1, tipc_enable_bearer() first holds tipc_net_lock, and then
wants to take ptype_lock to register TIPC protocol handler into the
networking stack.  But the ptype_lock has been taken by dev_add_pack()
on CPU0, so at this time the dev_add_pack() running on CPU1 has to be
busy looping.

Time 2 on CPU0:

  netif_receive_skb()->recv_msg()->tipc_recv_msg()

At time 2, an incoming TIPC packet arrives at CPU0, hence
tipc_recv_msg() will be invoked. In tipc_recv_msg(), it first wants
to hold tipc_net_lock.  At the moment, below scenario happens:

On CPU0, below is our sequence of taking locks:

  lock(ptype_lock)->lock(tipc_net_lock)

On CPU1, our sequence of taking locks looks like:

  lock(tipc_net_lock)->lock(ptype_lock)

Obviously deadlock may happen in this case.

But please note the deadlock possibly doesn't occur at all when the
first TIPC bearer is enabled.  Before enable_bearer() -- running on
CPU1 does not hold ptype_lock, so the TIPC receive handler (i.e.
recv_msg()) is not registered successfully via dev_add_pack(), so
the tipc_recv_msg() cannot be called by recv_msg() even if a TIPC
message comes to CPU0. But when the second TIPC bearer is
registered, the deadlock can perhaps really happen.

To fix it, we will push the work of registering TIPC protocol
handler into workqueue context. After the change, both paths taking
ptype_lock are always in process contexts, thus, the deadlock should
never occur.

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

macvtap: do not zerocopy if iov needs more pages than MAX_SKB_FRAGS

commit ece793fcfc417b3925844be88a6a6dc82ae8f7c6 upstream.

We try to linearize part of the skb when the number of iov is greater than
MAX_SKB_FRAGS. This is not enough since each single vector may occupy more than
one pages, so zerocopy_sg_fromiovec() may still fail and may break the guest
network.

Solve this problem by calculate the pages needed for iov before trying to do
zerocopy and switch to use copy instead of zerocopy if it needs more than
MAX_SKB_FRAGS.

This is done through introducing a new helper to count the pages for iov, and
call uarg->callback() manually when switching from zerocopy to copy to notify
vhost.

We can do further optimization on top.

This bug were introduced from b92946e2919134ebe2a4083e4302236295ea2a73
(macvtap: zerocopy: validate vectors before building skb).

Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vhost: zerocopy: poll vq in zerocopy callback

commit c70aa540c7a9f67add11ad3161096fb95233aa2e upstream.

We add used and signal guest in worker thread but did not poll the virtqueue
during the zero copy callback. This may lead the missing of adding and
signalling during zerocopy. Solve this by polling the virtqueue and let it
wakeup the worker during callback.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ipv6: tcp: fix potential use after free in tcp_v6_do_rcv

[ Upstream commit 3a1c756590633c0e86df606e5c618c190926a0df ]

In tcp_v6_do_rcv() code, when processing pkt options, we soley work
on our skb clone opt_skb that we've created earlier before entering
tcp_rcv_established() on our way. However, only in condition ...

  if (np->rxopt.bits.rxtclass)
    np->rcv_tclass = ipv6_get_dsfield(ipv6_hdr(skb));

... we work on skb itself. As we extract every other information out
of opt_skb in ipv6_pktoptions path, this seems wrong, since skb can
already be released by tcp_rcv_established() earlier on. When we try
to access it in ipv6_hdr(), we will dereference freed skb.

[ Bug added by commit 4c507d2897bd9b ("net: implement IP_RECVTOS for
  IP_PKTOPTIONS") ]

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ICMPv6: treat dest unreachable codes 5 and 6 as EACCES, not EPROTO

[ Upstream commit 61e76b178dbe7145e8d6afa84bb4ccea71918994 ]

RFC 4443 has defined two additional codes for ICMPv6 type 1 (destination
unreachable) messages:
        5 - Source address failed ingress/egress policy
6 - Reject route to destination

Now they are treated as protocol error and icmpv6_err_convert() converts them
to EPROTO.

RFC 4443 says:
"Codes 5 and 6 are more informative subsets of code 1."

Treat codes 5 and 6 as code 1 (EACCES)

Btw, connect() returning -EPROTO confuses firefox, so that fallback to
other/IPv4 addresses does not work:
https://bugzilla.mozilla.org/show_bug.cgi?id=910773

Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: bridge: convert MLDv2 Query MRC into msecs_to_jiffies for max_delay

[ Upstream commit 2d98c29b6fb3de44d9eaa73c09f9cf7209346383 ]

While looking into MLDv1/v2 code, I noticed that bridging code does
not convert it's max delay into jiffies for MLDv2 messages as we do
in core IPv6' multicast code.

RFC3810, 5.1.3. Maximum Response Code says:

  The Maximum Response Code field specifies the maximum time allowed
  before sending a responding Report. The actual time allowed, called
  the Maximum Response Delay, is represented in units of milliseconds,
  and is derived from the Maximum Response Code as follows: [...]

As we update timers that work with jiffies, we need to convert it.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Linus Lüssing <linus.luessing@web.de>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: Don't depend on per socket memory for neighbour discovery messages

[ Upstream commit 25a6e6b84fba601eff7c28d30da8ad7cfbef0d43 ]

Allocating skbs when sending out neighbour discovery messages
currently uses sock_alloc_send_skb() based on a per net namespace
socket and thus share a socket wmem buffer space.

If a netdevice is temporarily unable to transmit due to carrier
loss or for other reasons, the queued up ndisc messages will cosnume
all of the wmem space and will thus prevent from any more skbs to
be allocated even for netdevices that are able to transmit packets.

The number of neighbour discovery messages sent is very limited,
use of alloc_skb() bypasses the socket wmem buffer size enforcement
while the manual call to skb_set_owner_w() maintains the socket
reference needed for the IPv6 output path.

This patch has orginally been posted by Eric Dumazet in a modified
form.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Fabio Estevam <festevam@gmail.com>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: drop packets with multiple fragmentation headers

[ Upstream commit f46078cfcd77fa5165bf849f5e568a7ac5fa569c ]

It is not allowed for an ipv6 packet to contain multiple fragmentation
headers. So discard packets which were already reassembled by
fragmentation logic and send back a parameter problem icmp.

The updates for RFC 6980 will come in later, I have to do a bit more
research here.

Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: remove max_addresses check from ipv6_create_tempaddr

[ Upstream commit 4b08a8f1bd8cb4541c93ec170027b4d0782dab52 ]

Because of the max_addresses check attackers were able to disable privacy
extensions on an interface by creating enough autoconfigured addresses:

<http://seclists.org/oss-sec/2012/q4/292>

But the check is not actually needed: max_addresses protects the
kernel to install too many ipv6 addresses on an interface and guards
addrconf_prefix_rcv to install further addresses as soon as this limit
is reached. We only generate temporary addresses in direct response of
a new address showing up. As soon as we filled up the maximum number of
addresses of an interface, we stop installing more addresses and thus
also stop generating more temp addresses.

Even if the attacker tries to generate a lot of temporary addresses
by announcing a prefix and removing it again (lifetime == 0) we won't
install more temp addresses, because the temporary addresses do count
to the maximum number of addresses, thus we would stop installing new
autoconfigured addresses when the limit is reached.

This patch fixes CVE-2013-0343 (but other layer-2 attacks are still
possible).

Thanks to Ding Tianhong to bring this topic up again.

Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Ding Tianhong <dingtianhong@huawei.com>
Cc: George Kargiotakis <kargig@void.gr>
Cc: P J P <ppandit@redhat.com>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Acked-by: Ding Tianhong <dingtianhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tun: signedness bug in tun_get_user()

[ Upstream commit 15718ea0d844e4816dbd95d57a8a0e3e264ba90e ]

The recent fix d9bf5f1309 "tun: compare with 0 instead of total_len" is
not totally correct.  Because "len" and "sizeof()" are size_t type, that
means they are never less than zero.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

8139cp: Fix skb leak in rx_status_loop failure path.

[ Upstream commit d06f5187469eee1b2932c02fd093d113cfc60d5e ]

Introduced in cf3c4c03060b688cbc389ebc5065ebcce5653e96
("8139cp: Add dma_mapping_error checking")

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>