NeilBrown [Tue, 2 Jun 2020 04:48:21 +0000 (21:48 -0700)]
mm/writeback: discard NR_UNSTABLE_NFS, use NR_WRITEBACK instead
After an NFS page has been written it is considered "unstable" until a
COMMIT request succeeds. If the COMMIT fails, the page will be
re-written.
These "unstable" pages are currently accounted as "reclaimable", either
in WB_RECLAIMABLE, or in NR_UNSTABLE_NFS which is included in a
'reclaimable' count. This might have made sense when sending the COMMIT
required a separate action by the VFS/MM (e.g. releasepage() used to
send a COMMIT). However now that all writes generated by ->writepages()
will automatically be followed by a COMMIT (since commit
919e3bd9a875
("NFS: Ensure we commit after writeback is complete")) it makes more
sense to treat them as writeback pages.
So this patch removes NR_UNSTABLE_NFS and accounts unstable pages in
NR_WRITEBACK and WB_WRITEBACK.
A particular effect of this change is that when
wb_check_background_flush() calls wb_over_bg_threshold(), the latter
will report 'true' a lot less often as the 'unstable' pages are no
longer considered 'dirty' (as there is nothing that writeback can do
about them anyway).
Currently wb_check_background_flush() will trigger writeback to NFS even
when there are relatively few dirty pages (if there are lots of unstable
pages), this can result in small writes going to the server (10s of
Kilobytes rather than a Megabyte) which hurts throughput. With this
patch, there are fewer writes which are each larger on average.
Where the NR_UNSTABLE_NFS count was included in statistics
virtual-files, the entry is retained, but the value is hard-coded as
zero. static trace points and warning printks which mentioned this
counter no longer report it.
[akpm@linux-foundation.org: re-layout comment]
[akpm@linux-foundation.org: fix printk warning]
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Acked-by: Michal Hocko <mhocko@suse.com> [mm]
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Link: http://lkml.kernel.org/r/87d06j7gqa.fsf@notabene.neil.brown.name
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
NeilBrown [Tue, 2 Jun 2020 04:48:18 +0000 (21:48 -0700)]
mm/writeback: replace PF_LESS_THROTTLE with PF_LOCAL_THROTTLE
PF_LESS_THROTTLE exists for loop-back nfsd (and a similar need in the
loop block driver and callers of prctl(PR_SET_IO_FLUSHER)), where a
daemon needs to write to one bdi (the final bdi) in order to free up
writes queued to another bdi (the client bdi).
The daemon sets PF_LESS_THROTTLE and gets a larger allowance of dirty
pages, so that it can still dirty pages after other processses have been
throttled. The purpose of this is to avoid deadlock that happen when
the PF_LESS_THROTTLE process must write for any dirty pages to be freed,
but it is being thottled and cannot write.
This approach was designed when all threads were blocked equally,
independently on which device they were writing to, or how fast it was.
Since that time the writeback algorithm has changed substantially with
different threads getting different allowances based on non-trivial
heuristics. This means the simple "add 25%" heuristic is no longer
reliable.
The important issue is not that the daemon needs a *larger* dirty page
allowance, but that it needs a *private* dirty page allowance, so that
dirty pages for the "client" bdi that it is helping to clear (the bdi
for an NFS filesystem or loop block device etc) do not affect the
throttling of the daemon writing to the "final" bdi.
This patch changes the heuristic so that the task is not throttled when
the bdi it is writing to has a dirty page count below below (or equal
to) the free-run threshold for that bdi. This ensures it will always be
able to have some pages in flight, and so will not deadlock.
In a steady-state, it is expected that PF_LOCAL_THROTTLE tasks might
still be throttled by global threshold, but that is acceptable as it is
only the deadlock state that is interesting for this flag.
This approach of "only throttle when target bdi is busy" is consistent
with the other use of PF_LESS_THROTTLE in current_may_throttle(), were
it causes attention to be focussed only on the target bdi.
So this patch
- renames PF_LESS_THROTTLE to PF_LOCAL_THROTTLE,
- removes the 25% bonus that that flag gives, and
- If PF_LOCAL_THROTTLE is set, don't delay at all unless the
global and the local free-run thresholds are exceeded.
Note that previously realtime threads were treated the same as
PF_LESS_THROTTLE threads. This patch does *not* change the behvaiour
for real-time threads, so it is now different from the behaviour of nfsd
and loop tasks. I don't know what is wanted for realtime.
[akpm@linux-foundation.org: coding style fixes]
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Chuck Lever <chuck.lever@oracle.com> [nfsd]
Cc: Christoph Hellwig <hch@lst.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Link: http://lkml.kernel.org/r/87ftbf7gs3.fsf@notabene.neil.brown.name
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Chao Yu [Tue, 2 Jun 2020 04:48:15 +0000 (21:48 -0700)]
mm/page-writeback.c: remove unused variable
Commit
64081362e8ff ("mm/page-writeback.c: fix range_cyclic writeback
vs writepages deadlock") left unused variable, remove it.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: http://lkml.kernel.org/r/20200528033740.17269-1-yuchao0@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox (Oracle) [Tue, 2 Jun 2020 04:48:12 +0000 (21:48 -0700)]
mm/filemap.c: remove misleading comment
We no longer return 0 here and the comment doesn't tell us anything that
we don't already know (SIGBUS is a pretty good indicator that things
didn't work out).
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Link: http://lkml.kernel.org/r/20200529123243.20640-1-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Guoqing Jiang [Tue, 2 Jun 2020 04:48:09 +0000 (21:48 -0700)]
mm_types.h: change set_page_private to inline function
Change it to inline function to make callers use the proper argument. And
no need for it to be macro per Andrew's comment [1].
[1] https://lore.kernel.org/lkml/
20200518221235.
1fa32c38e5766113f78e3f0d@linux-foundation.org/
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200525203149.18802-1-guoqing.jiang@cloud.ionos.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Guoqing Jiang [Tue, 2 Jun 2020 04:48:06 +0000 (21:48 -0700)]
mm/migrate.c: call detach_page_private to cleanup code
We can cleanup code a little by call detach_page_private here.
[akpm@linux-foundation.org: use attach_page_private(), per Dave]
http://lkml.kernel.org/r/
20200521225220.GV2005@dread.disaster.area
[akpm@linux-foundation.org: clear PagePrivate]
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Gao Xiang <gaoxiang25@huawei.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Link: http://lkml.kernel.org/r/20200519214049.15179-1-guoqing.jiang@cloud.ionos.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Guoqing Jiang [Tue, 2 Jun 2020 04:48:03 +0000 (21:48 -0700)]
buffer_head.h: remove attach_page_buffers
All the callers have replaced attach_page_buffers with the new function
attach_page_private, so remove it.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Roman Gushchin <guro@fb.com>
Cc: Andreas Dilger <adilger@dilger.ca>
Link: http://lkml.kernel.org/r/20200517214718.468-10-guoqing.jiang@cloud.ionos.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Guoqing Jiang [Tue, 2 Jun 2020 04:48:00 +0000 (21:48 -0700)]
orangefs: use attach/detach_page_private
Since the new pair function is introduced, we can call them to clean the
code in orangefs.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Mike Marshall <hubcap@omnibond.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Martin Brandenburg <martin@omnibond.com>
Link: http://lkml.kernel.org/r/20200517214718.468-9-guoqing.jiang@cloud.ionos.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Guoqing Jiang [Tue, 2 Jun 2020 04:47:57 +0000 (21:47 -0700)]
ntfs: replace attach_page_buffers with attach_page_private
Call the new function since attach_page_buffers will be removed.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Anton Altaparmakov <anton@tuxera.com>
Link: http://lkml.kernel.org/r/20200517214718.468-8-guoqing.jiang@cloud.ionos.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Guoqing Jiang [Tue, 2 Jun 2020 04:47:54 +0000 (21:47 -0700)]
iomap: use attach/detach_page_private
Since the new pair function is introduced, we can call them to clean the
code in iomap.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Link: http://lkml.kernel.org/r/20200517214718.468-7-guoqing.jiang@cloud.ionos.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Guoqing Jiang [Tue, 2 Jun 2020 04:47:51 +0000 (21:47 -0700)]
f2fs: use attach/detach_page_private
Since the new pair function is introduced, we can call them to clean the
code in f2fs.h.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Chao Yu <yuchao0@huawei.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Link: http://lkml.kernel.org/r/20200517214718.468-6-guoqing.jiang@cloud.ionos.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Guoqing Jiang [Tue, 2 Jun 2020 04:47:48 +0000 (21:47 -0700)]
fs/buffer.c: use attach/detach_page_private
Since the new pair function is introduced, we can call them to clean the
code in buffer.c.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Link: http://lkml.kernel.org/r/20200517214718.468-5-guoqing.jiang@cloud.ionos.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Guoqing Jiang [Tue, 2 Jun 2020 04:47:45 +0000 (21:47 -0700)]
btrfs: use attach/detach_page_private
Since the new pair function is introduced, we can call them to clean the
code in btrfs.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Sterba <dsterba@suse.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Link: http://lkml.kernel.org/r/20200517214718.468-4-guoqing.jiang@cloud.ionos.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Guoqing Jiang [Tue, 2 Jun 2020 04:47:42 +0000 (21:47 -0700)]
md: remove __clear_page_buffers and use attach/detach_page_private
After introduction attach/detach_page_private in pagemap.h, we can remove
the duplicated code and call the new functions.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Song Liu <song@kernel.org>
Link: http://lkml.kernel.org/r/20200517214718.468-3-guoqing.jiang@cloud.ionos.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Guoqing Jiang [Tue, 2 Jun 2020 04:47:38 +0000 (21:47 -0700)]
include/linux/pagemap.h: introduce attach/detach_page_private
Patch series "Introduce attach/detach_page_private to cleanup code".
This patch (of 10):
The logic in attach_page_buffers and __clear_page_buffers are quite
paired, but
1. they are located in different files.
2. attach_page_buffers is implemented in buffer_head.h, so it could be
used by other files. But __clear_page_buffers is static function in
buffer.c and other potential users can't call the function, md-bitmap
even copied the function.
So, introduce the new attach/detach_page_private to replace them. With
the new pair of function, we will remove the usage of attach_page_buffers
and __clear_page_buffers in next patches. Thanks for suggestions about
the function name from Alexander Viro, Andreas Grünbacher, Christoph
Hellwig and Matthew Wilcox.
Suggested-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Yafang Shao <laoar.shao@gmail.com>
Cc: Song Liu <song@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Chao Yu <chao@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Anton Altaparmakov <anton@tuxera.com>
Cc: Mike Marshall <hubcap@omnibond.com>
Cc: Martin Brandenburg <martin@omnibond.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Roman Gushchin <guro@fb.com>
Cc: Andreas Dilger <adilger@dilger.ca>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: Dave Chinner <david@fromorbit.com>
Link: http://lkml.kernel.org/r/20200517214718.468-1-guoqing.jiang@cloud.ionos.com
Link: http://lkml.kernel.org/r/20200517214718.468-2-guoqing.jiang@cloud.ionos.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox (Oracle) [Tue, 2 Jun 2020 04:47:34 +0000 (21:47 -0700)]
iomap: convert from readpages to readahead
Use the new readahead operation in iomap. Convert XFS and ZoneFS to use
it.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Gao Xiang <gaoxiang25@huawei.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Link: http://lkml.kernel.org/r/20200414150233.24495-26-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox (Oracle) [Tue, 2 Jun 2020 04:47:31 +0000 (21:47 -0700)]
fuse: convert from readpages to readahead
Implement the new readahead operation in fuse by using __readahead_batch()
to fill the array of pages in fuse_args_pages directly. This lets us
inline fuse_readpages_fill() into fuse_readahead().
[willy@infradead.org: build fix]
Link: http://lkml.kernel.org/r/20200415025938.GB5820@bombadil.infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Gao Xiang <gaoxiang25@huawei.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: http://lkml.kernel.org/r/20200414150233.24495-25-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox (Oracle) [Tue, 2 Jun 2020 04:47:27 +0000 (21:47 -0700)]
f2fs: pass the inode to f2fs_mpage_readpages
This function now only uses the mapping argument to look up the inode, and
both callers already have the inode, so just pass the inode instead of the
mapping.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Gao Xiang <gaoxiang25@huawei.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Link: http://lkml.kernel.org/r/20200414150233.24495-24-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox (Oracle) [Tue, 2 Jun 2020 04:47:23 +0000 (21:47 -0700)]
f2fs: convert from readpages to readahead
Use the new readahead operation in f2fs
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Gao Xiang <gaoxiang25@huawei.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Link: http://lkml.kernel.org/r/20200414150233.24495-23-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox (Oracle) [Tue, 2 Jun 2020 04:47:20 +0000 (21:47 -0700)]
ext4: pass the inode to ext4_mpage_readpages
This function now only uses the mapping argument to look up the inode, and
both callers already have the inode, so just pass the inode instead of the
mapping.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Gao Xiang <gaoxiang25@huawei.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Link: http://lkml.kernel.org/r/20200414150233.24495-22-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox (Oracle) [Tue, 2 Jun 2020 04:47:16 +0000 (21:47 -0700)]
ext4: convert from readpages to readahead
Use the new readahead operation in ext4
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Gao Xiang <gaoxiang25@huawei.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Link: http://lkml.kernel.org/r/20200414150233.24495-21-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox (Oracle) [Tue, 2 Jun 2020 04:47:13 +0000 (21:47 -0700)]
erofs: convert compressed files from readpages to readahead
Use the new readahead operation in erofs.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Acked-by: Gao Xiang <gaoxiang25@huawei.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Link: http://lkml.kernel.org/r/20200414150233.24495-20-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox (Oracle) [Tue, 2 Jun 2020 04:47:09 +0000 (21:47 -0700)]
erofs: convert uncompressed files from readpages to readahead
Use the new readahead operation in erofs
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Acked-by: Gao Xiang <gaoxiang25@huawei.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Link: http://lkml.kernel.org/r/20200414150233.24495-19-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox (Oracle) [Tue, 2 Jun 2020 04:47:05 +0000 (21:47 -0700)]
btrfs: convert from readpages to readahead
Implement the new readahead method in btrfs using the new
readahead_page_batch() function.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Gao Xiang <gaoxiang25@huawei.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Link: http://lkml.kernel.org/r/20200414150233.24495-18-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox (Oracle) [Tue, 2 Jun 2020 04:47:02 +0000 (21:47 -0700)]
fs: convert mpage_readpages to mpage_readahead
Implement the new readahead aop and convert all callers (block_dev,
exfat, ext2, fat, gfs2, hpfs, isofs, jfs, nilfs2, ocfs2, omfs, qnx6,
reiserfs & udf).
The callers are all trivial except for GFS2 & OCFS2.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> # ocfs2
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> # ocfs2
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Gao Xiang <gaoxiang25@huawei.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Link: http://lkml.kernel.org/r/20200414150233.24495-17-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox (Oracle) [Tue, 2 Jun 2020 04:46:58 +0000 (21:46 -0700)]
mm: use memalloc_nofs_save in readahead path
Ensure that memory allocations in the readahead path do not attempt to
reclaim file-backed pages, which could lead to a deadlock. It is
possible, though unlikely this is the root cause of a problem observed
by Cong Wang.
Reported-by: Cong Wang <xiyou.wangcong@gmail.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Gao Xiang <gaoxiang25@huawei.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Link: http://lkml.kernel.org/r/20200414150233.24495-16-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox (Oracle) [Tue, 2 Jun 2020 04:46:54 +0000 (21:46 -0700)]
mm: document why we don't set PageReadahead
If the page is already in cache, we don't set PageReadahead on it.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Gao Xiang <gaoxiang25@huawei.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Link: http://lkml.kernel.org/r/20200414150233.24495-15-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox (Oracle) [Tue, 2 Jun 2020 04:46:51 +0000 (21:46 -0700)]
mm: add page_cache_readahead_unbounded
ext4 and f2fs have duplicated the guts of the readahead code so they can
read past i_size. Instead, separate out the guts of the readahead code
so they can call it directly.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Gao Xiang <gaoxiang25@huawei.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Link: http://lkml.kernel.org/r/20200414150233.24495-14-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox (Oracle) [Tue, 2 Jun 2020 04:46:47 +0000 (21:46 -0700)]
mm: move end_index check out of readahead loop
By reducing nr_to_read, we can eliminate this check from inside the loop.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Gao Xiang <gaoxiang25@huawei.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Link: http://lkml.kernel.org/r/20200414150233.24495-13-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox (Oracle) [Tue, 2 Jun 2020 04:46:44 +0000 (21:46 -0700)]
mm: add readahead address space operation
This replaces ->readpages with a saner interface:
- Return void instead of an ignored error code.
- Page cache is already populated with locked pages when ->readahead
is called.
- New arguments can be passed to the implementation without changing
all the filesystems that use a common helper function like
mpage_readahead().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Gao Xiang <gaoxiang25@huawei.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Link: http://lkml.kernel.org/r/20200414150233.24495-12-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox (Oracle) [Tue, 2 Jun 2020 04:46:40 +0000 (21:46 -0700)]
mm: put readahead pages in cache earlier
When populating the page cache for readahead, mappings that use
->readpages must populate the page cache themselves as the pages are
passed on a linked list which would normally be used for the page
cache's LRU. For mappings that use ->readpage or the upcoming
->readahead method, we can put the pages into the page cache as soon as
they're allocated, which solves a race between readahead and direct IO.
It also lets us remove the gfp argument from read_pages().
Use the new readahead_page() API to implement the repeated calls to
->readpage(), just like most filesystems will.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Gao Xiang <gaoxiang25@huawei.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Link: http://lkml.kernel.org/r/20200414150233.24495-11-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox (Oracle) [Tue, 2 Jun 2020 04:46:36 +0000 (21:46 -0700)]
mm: remove 'page_offset' from readahead loop
Replace the page_offset variable with 'index + i'.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Gao Xiang <gaoxiang25@huawei.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Link: http://lkml.kernel.org/r/20200414150233.24495-10-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox (Oracle) [Tue, 2 Jun 2020 04:46:32 +0000 (21:46 -0700)]
mm: rename readahead loop variable to 'i'
Change the type of page_idx to unsigned long, and rename it -- it's just
a loop counter, not a page index.
Suggested-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Gao Xiang <gaoxiang25@huawei.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Link: http://lkml.kernel.org/r/20200414150233.24495-9-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox (Oracle) [Tue, 2 Jun 2020 04:46:29 +0000 (21:46 -0700)]
mm: rename various 'offset' parameters to 'index'
The word 'offset' is used ambiguously to mean 'byte offset within a
page', 'byte offset from the start of the file' and 'page offset from
the start of the file'.
Use 'index' to mean 'page offset from the start of the file' throughout
the readahead code.
[ We should probably rename the 'pgoff_t' type to 'pgidx_t' too - Linus ]
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Gao Xiang <gaoxiang25@huawei.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Link: http://lkml.kernel.org/r/20200414150233.24495-8-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox (Oracle) [Tue, 2 Jun 2020 04:46:25 +0000 (21:46 -0700)]
mm: use readahead_control to pass arguments
In this patch, only between __do_page_cache_readahead() and
read_pages(), but it will be extended in upcoming patches. The
read_pages() function becomes aops centric, as this makes the most sense
by the end of the patchset.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Gao Xiang <gaoxiang25@huawei.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Link: http://lkml.kernel.org/r/20200414150233.24495-7-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox (Oracle) [Tue, 2 Jun 2020 04:46:21 +0000 (21:46 -0700)]
mm: add new readahead_control API
Filesystems which implement the upcoming ->readahead method will get
their pages by calling readahead_page() or readahead_page_batch().
These functions support large pages, even though none of the filesystems
to be converted do yet.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Gao Xiang <gaoxiang25@huawei.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Link: http://lkml.kernel.org/r/20200414150233.24495-6-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox (Oracle) [Tue, 2 Jun 2020 04:46:18 +0000 (21:46 -0700)]
mm: move readahead nr_pages check into read_pages
Simplify the callers by moving the check for nr_pages and the BUG_ON
into read_pages().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Gao Xiang <gaoxiang25@huawei.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Link: http://lkml.kernel.org/r/20200414150233.24495-5-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox (Oracle) [Tue, 2 Jun 2020 04:46:14 +0000 (21:46 -0700)]
mm: ignore return value of ->readpages
We used to assign the return value to a variable, which we then ignored.
Remove the pretence of caring.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Gao Xiang <gaoxiang25@huawei.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Link: http://lkml.kernel.org/r/20200414150233.24495-4-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox (Oracle) [Tue, 2 Jun 2020 04:46:10 +0000 (21:46 -0700)]
mm: return void from various readahead functions
ondemand_readahead has two callers, neither of which use the return
value. That means that both ra_submit and __do_page_cache_readahead()
can return void, and we don't need to worry that a present page in the
readahead window causes us to return a smaller nr_pages than we ought to
have.
Similarly, no caller uses the return value from
force_page_cache_readahead().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Gao Xiang <gaoxiang25@huawei.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Link: http://lkml.kernel.org/r/20200414150233.24495-3-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox (Oracle) [Tue, 2 Jun 2020 04:46:07 +0000 (21:46 -0700)]
mm: move readahead prototypes from mm.h
Patch series "Change readahead API", v11.
This series adds a readahead address_space operation to replace the
readpages operation. The key difference is that pages are added to the
page cache as they are allocated (and then looked up by the filesystem)
instead of passing them on a list to the readpages operation and having
the filesystem add them to the page cache. It's a net reduction in code
for each implementation, more efficient than walking a list, and solves
the direct-write vs buffered-read problem reported by yu kuai at
http://lkml.kernel.org/r/
20200116063601.39201-1-yukuai3@huawei.com
The only unconverted filesystems are those which use fscache. Their
conversion is pending Dave Howells' rewrite which will make the
conversion substantially easier. This should be completed by the end of
the year.
I want to thank the reviewers/testers; Dave Chinner, John Hubbard, Eric
Biggers, Johannes Thumshirn, Dave Sterba, Zi Yan, Christoph Hellwig and
Miklos Szeredi have done a marvellous job of providing constructive
criticism.
These patches pass an xfstests run on ext4, xfs & btrfs with no
regressions that I can tell (some of the tests seem a little flaky
before and remain flaky afterwards).
This patch (of 25):
The readahead code is part of the page cache so should be found in the
pagemap.h file. force_page_cache_readahead is only used within mm, so
move it to mm/internal.h instead. Remove the parameter names where they
add no value, and rename the ones which were actively misleading.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Gao Xiang <gaoxiang25@huawei.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Link: http://lkml.kernel.org/r/20200414150233.24495-1-willy@infradead.org
Link: http://lkml.kernel.org/r/20200414150233.24495-2-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vlastimil Babka [Tue, 2 Jun 2020 04:46:03 +0000 (21:46 -0700)]
mm, dump_page(): do not crash with invalid mapping pointer
We have seen a following problem on a RPi4 with 1G RAM:
BUG: Bad page state in process systemd-hwdb pfn:35601
page:
ffff7e0000d58040 refcount:15 mapcount:131221 mapping:
efd8fe765bc80080 index:0x1 compound_mapcount: -32767
Unable to handle kernel paging request at virtual address
efd8fe765bc80080
Mem abort info:
ESR = 0x96000004
Exception class = DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
[
efd8fe765bc80080] address between user and kernel address ranges
Internal error: Oops:
96000004 [#1] SMP
Modules linked in: btrfs libcrc32c xor xor_neon zlib_deflate raid6_pq mmc_block xhci_pci xhci_hcd usbcore sdhci_iproc sdhci_pltfm sdhci mmc_core clk_raspberrypi gpio_raspberrypi_exp pcie_brcmstb bcm2835_dma gpio_regulator phy_generic fixed sg scsi_mod efivarfs
Supported: No, Unreleased kernel
CPU: 3 PID: 408 Comm: systemd-hwdb Not tainted 5.3.18-8-default #1 SLE15-SP2 (unreleased)
Hardware name: raspberrypi rpi/rpi, BIOS 2020.01 02/21/2020
pstate:
40000085 (nZcv daIf -PAN -UAO)
pc : __dump_page+0x268/0x368
lr : __dump_page+0xc4/0x368
sp :
ffff000012563860
x29:
ffff000012563860 x28:
ffff80003ddc4300
x27:
0000000000000010 x26:
000000000000003f
x25:
ffff7e0000d58040 x24:
000000000000000f
x23:
efd8fe765bc80080 x22:
0000000000020095
x21:
efd8fe765bc80080 x20:
ffff000010ede8b0
x19:
ffff7e0000d58040 x18:
ffffffffffffffff
x17:
0000000000000001 x16:
0000000000000007
x15:
ffff000011689708 x14:
3030386362353637
x13:
6566386466653a67 x12:
6e697070616d2031
x11:
32323133313a746e x10:
756f6370616d2035
x9 :
ffff00001168a840 x8 :
ffff00001077a670
x7 :
000000000000013d x6 :
ffff0000118a43b5
x5 :
0000000000000001 x4 :
ffff80003dd9e2c8
x3 :
ffff80003dd9e2c8 x2 :
911c8d7c2f483500
x1 :
dead000000000100 x0 :
efd8fe765bc80080
Call trace:
__dump_page+0x268/0x368
bad_page+0xd4/0x168
check_new_page_bad+0x80/0xb8
rmqueue_bulk.constprop.26+0x4d8/0x788
get_page_from_freelist+0x4d4/0x1228
__alloc_pages_nodemask+0x134/0xe48
alloc_pages_vma+0x198/0x1c0
do_anonymous_page+0x1a4/0x4d8
__handle_mm_fault+0x4e8/0x560
handle_mm_fault+0x104/0x1e0
do_page_fault+0x1e8/0x4c0
do_translation_fault+0xb0/0xc0
do_mem_abort+0x50/0xb0
el0_da+0x24/0x28
Code:
f9401025 8b8018a0 9a851005 17ffffca (
f94002a0)
Besides the underlying issue with page->mapping containing a bogus value
for some reason, we can see that __dump_page() crashed by trying to read
the pointer at mapping->host, turning a recoverable warning into full
Oops.
It can be expected that when page is reported as bad state for some
reason, the pointers there should not be trusted blindly.
So this patch treats all data in __dump_page() that depends on
page->mapping as lava, using probe_kernel_read_strict(). Ideally this
would include the dentry->d_parent recursively, but that would mean
changing printk handler for %pd. Chances of reaching the dentry
printing part with an initially bogus mapping pointer should be rather
low, though.
Also prefix printing mapping->a_ops with a description of what is being
printed. In case the value is bogus, %ps will print raw value instead
of the symbol name and then it's not obvious at all that it's printing
a_ops.
Reported-by: Petr Tesarik <ptesarik@suse.cz>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Link: http://lkml.kernel.org/r/20200331165454.12263-1-vbabka@suse.cz
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrew Morton [Tue, 2 Jun 2020 04:46:00 +0000 (21:46 -0700)]
Documentation/vm/slub.rst: s/Toggle/Enable/
"toggle" means to change a boolean thing's state. This operation
doesn't do that - it sets it to "true".
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Rafael Aquini <aquini@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Qian Cai [Tue, 2 Jun 2020 04:45:57 +0000 (21:45 -0700)]
mm/slub: fix stack overruns with SLUB_STATS
There is no need to copy SLUB_STATS items from root memcg cache to new
memcg cache copies. Doing so could result in stack overruns because the
store function only accepts 0 to clear the stat and returns an error for
everything else while the show method would print out the whole stat.
Then, the mismatch of the lengths returns from show and store methods
happens in memcg_propagate_slab_attrs():
else if (root_cache->max_attr_size < ARRAY_SIZE(mbuf))
buf = mbuf;
max_attr_size is only 2 from slab_attr_store(), then, it uses mbuf[64]
in show_stat() later where a bounch of sprintf() would overrun the stack
variable. Fix it by always allocating a page of buffer to be used in
show_stat() if SLUB_STATS=y which should only be used for debug purpose.
# echo 1 > /sys/kernel/slab/fs_cache/shrink
BUG: KASAN: stack-out-of-bounds in number+0x421/0x6e0
Write of size 1 at addr
ffffc900256cfde0 by task kworker/76:0/53251
Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019
Workqueue: memcg_kmem_cache memcg_kmem_cache_create_func
Call Trace:
number+0x421/0x6e0
vsnprintf+0x451/0x8e0
sprintf+0x9e/0xd0
show_stat+0x124/0x1d0
alloc_slowpath_show+0x13/0x20
__kmem_cache_create+0x47a/0x6b0
addr
ffffc900256cfde0 is located in stack of task kworker/76:0/53251 at offset 0 in frame:
process_one_work+0x0/0xb90
this frame has 1 object:
[32, 72) 'lockdep_map'
Memory state around the buggy address:
ffffc900256cfc80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffffc900256cfd00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
ffffc900256cfd80: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1
^
ffffc900256cfe00: 00 00 00 00 00 f2 f2 f2 00 00 00 00 00 00 00 00
ffffc900256cfe80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: __kmem_cache_create+0x6ac/0x6b0
Workqueue: memcg_kmem_cache memcg_kmem_cache_create_func
Call Trace:
__kmem_cache_create+0x6ac/0x6b0
Fixes:
107dab5c92d5 ("slub: slub-specific propagation changes")
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Glauber Costa <glauber@scylladb.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Link: http://lkml.kernel.org/r/20200429222356.4322-1-cai@lca.pw
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Christopher Lameter [Tue, 2 Jun 2020 04:45:53 +0000 (21:45 -0700)]
slub: remove kmalloc under list_lock from list_slab_objects() V2
list_slab_objects() is called when a slab is destroyed and there are
objects still left to list the objects in the syslog. This is a pretty
rare event.
And there it seems we take the list_lock and call kmalloc while holding
that lock.
Perform the allocation in free_partial() before the list_lock is taken.
Fixes:
bbd7d57bfe852d9788bae5fb171c7edb4021d8ac ("slub: Potential stack overflow")
Signed-off-by: Christopher Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Yu Zhao <yuzhao@google.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.21.2002031721250.1668@www.lameter.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Christoph Lameter [Tue, 2 Jun 2020 04:45:50 +0000 (21:45 -0700)]
slub: Remove userspace notifier for cache add/remove
I came across some unnecessary uevents once again which reminded me
this. The patch seems to be lost in the leaves of the original
discussion [1], so resending.
[1] https://lore.kernel.org/r/alpine.DEB.2.21.
2001281813130.745@www.lameter.com
Kmem caches are internal kernel structures so it is strange that
userspace notifiers would be needed. And I am not aware of any use of
these notifiers. These notifiers may just exist because in the initial
slub release the sysfs code was copied from another subsystem.
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Koutný <mkoutny@suse.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Link: http://lkml.kernel.org/r/20200423115721.19821-1-mkoutny@suse.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dongli Zhang [Tue, 2 Jun 2020 04:45:47 +0000 (21:45 -0700)]
mm/slub.c: fix corrupted freechain in deactivate_slab()
The slub_debug is able to fix the corrupted slab freelist/page.
However, alloc_debug_processing() only checks the validity of current
and next freepointer during allocation path. As a result, once some
objects have their freepointers corrupted, deactivate_slab() may lead to
page fault.
Below is from a test kernel module when 'slub_debug=PUF,kmalloc-128
slub_nomerge'. The test kernel corrupts the freepointer of one free
object on purpose. Unfortunately, deactivate_slab() does not detect it
when iterating the freechain.
BUG: unable to handle page fault for address:
00000000123456f8
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
... ...
RIP: 0010:deactivate_slab.isra.92+0xed/0x490
... ...
Call Trace:
___slab_alloc+0x536/0x570
__slab_alloc+0x17/0x30
__kmalloc+0x1d9/0x200
ext4_htree_store_dirent+0x30/0xf0
htree_dirblock_to_tree+0xcb/0x1c0
ext4_htree_fill_tree+0x1bc/0x2d0
ext4_readdir+0x54f/0x920
iterate_dir+0x88/0x190
__x64_sys_getdents+0xa6/0x140
do_syscall_64+0x49/0x170
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Therefore, this patch adds extra consistency check in deactivate_slab().
Once an object's freepointer is corrupted, all following objects
starting at this object are isolated.
[akpm@linux-foundation.org: fix build with CONFIG_SLAB_DEBUG=n]
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Joe Jin <joe.jin@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Link: http://lkml.kernel.org/r/20200331031450.12182-1-dongli.zhang@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vlastimil Babka [Tue, 2 Jun 2020 04:45:43 +0000 (21:45 -0700)]
usercopy: mark dma-kmalloc caches as usercopy caches
We have seen a "usercopy: Kernel memory overwrite attempt detected to
SLUB object 'dma-kmalloc-1 k' (offset 0, size 11)!" error on s390x, as
IUCV uses kmalloc() with __GFP_DMA because of memory address
restrictions. The issue has been discussed [2] and it has been noted
that if all the kmalloc caches are marked as usercopy, there's little
reason not to mark dma-kmalloc caches too. The 'dma' part merely means
that __GFP_DMA is used to restrict memory address range.
As Jann Horn put it [3]:
"I think dma-kmalloc slabs should be handled the same way as normal
kmalloc slabs. When a dma-kmalloc allocation is freshly created, it is
just normal kernel memory - even if it might later be used for DMA -,
and it should be perfectly fine to copy_from_user() into such
allocations at that point, and to copy_to_user() out of them at the
end. If you look at the places where such allocations are created, you
can see things like kmemdup(), memcpy() and so on - all normal
operations that shouldn't conceptually be different from usercopy in
any relevant way."
Thus this patch marks the dma-kmalloc-* caches as usercopy.
[1] https://bugzilla.suse.com/show_bug.cgi?id=1156053
[2] https://lore.kernel.org/kernel-hardening/
bfca96db-bbd0-d958-7732-
76e36c667c68@suse.cz/
[3] https://lore.kernel.org/kernel-hardening/CAG48ez1a4waGk9kB0WLaSbs4muSoK0AYAVk8=XYaKj4_+6e6Hg@mail.gmail.com/
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Jiri Slaby <jslaby@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Christopher Lameter <cl@linux.com>
Cc: Julian Wiedmann <jwi@linux.ibm.com>
Cc: Ursula Braun <ubraun@linux.ibm.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: David Windsor <dave@nullcore.net>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Dave Kleikamp <dave.kleikamp@oracle.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Luis de Bethencourt <luisbg@kernel.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Matthew Garrett <mjg59@google.com>
Cc: Michal Kubecek <mkubecek@suse.cz>
Link: http://lkml.kernel.org/r/7d810f6d-8085-ea2f-7805-47ba3842dc50@suse.cz
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Layton [Tue, 2 Jun 2020 04:45:40 +0000 (21:45 -0700)]
fs/buffer.c: record blockdev write errors in super_block that it backs
When syncing out a block device (a'la __sync_blockdev), any error
encountered will only be recorded in the bd_inode's mapping. When the
blockdev contains a filesystem however, we'd like to also record the
error in the super_block that's stored there.
Make mark_buffer_write_io_error also record the error in the
corresponding super_block when a writeback error occurs and the block
device contains a mounted superblock.
Since superblocks are RCU freed, hold the rcu_read_lock to ensure that
the superblock doesn't go away while we're marking it.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andres Freund <andres@anarazel.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Link: http://lkml.kernel.org/r/20200428135155.19223-3-jlayton@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Layton [Tue, 2 Jun 2020 04:45:36 +0000 (21:45 -0700)]
vfs: track per-sb writeback errors and report them to syncfs
Patch series "vfs: have syncfs() return error when there are writeback
errors", v6.
Currently, syncfs does not return errors when one of the inodes fails to
be written back. It will return errors based on the legacy AS_EIO and
AS_ENOSPC flags when syncing out the block device fails, but that's not
particularly helpful for filesystems that aren't backed by a blockdev.
It's also possible for a stray sync to lose those errors.
The basic idea in this set is to track writeback errors at the
superblock level, so that we can quickly and easily check whether
something bad happened without having to fsync each file individually.
syncfs is then changed to reliably report writeback errors after they
occur, much in the same fashion as fsync does now.
This patch (of 2):
Usually we suggest that applications call fsync when they want to ensure
that all data written to the file has made it to the backing store, but
that can be inefficient when there are a lot of open files.
Calling syncfs on the filesystem can be more efficient in some
situations, but the error reporting doesn't currently work the way most
people expect. If a single inode on a filesystem reports a writeback
error, syncfs won't necessarily return an error. syncfs only returns an
error if __sync_blockdev fails, and on some filesystems that's a no-op.
It would be better if syncfs reported an error if there were any
writeback failures. Then applications could call syncfs to see if there
are any errors on any open files, and could then call fsync on all of
the other descriptors to figure out which one failed.
This patch adds a new errseq_t to struct super_block, and has
mapping_set_error also record writeback errors there.
To report those errors, we also need to keep an errseq_t in struct file
to act as a cursor. This patch adds a dedicated field for that purpose,
which slots nicely into 4 bytes of padding at the end of struct file on
x86_64.
An earlier version of this patch used an O_PATH file descriptor to cue
the kernel that the open file should track the superblock error and not
the inode's writeback error.
I think that API is just too weird though. This is simpler and should
make syncfs error reporting "just work" even if someone is multiplexing
fsync and syncfs on the same fds.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Andres Freund <andres@anarazel.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: David Howells <dhowells@redhat.com>
Link: http://lkml.kernel.org/r/20200428135155.19223-1-jlayton@kernel.org
Link: http://lkml.kernel.org/r/20200428135155.19223-2-jlayton@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrew Morton [Tue, 2 Jun 2020 04:45:33 +0000 (21:45 -0700)]
arch/parisc/include/asm/pgtable.h: remove unused `old_pte'
parisc's set_pte_at() macro has set-but-not-used variable:
include/linux/pgtable.h: In function 'pte_clear_not_present_full':
arch/parisc/include/asm/pgtable.h:96:9: warning: variable 'old_pte' set but not used [-Wunused-but-set-variable]
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Gang He [Tue, 2 Jun 2020 04:45:29 +0000 (21:45 -0700)]
ocfs2: mount shared volume without ha stack
Usually we create and use a ocfs2 shared volume on the top of ha stack.
For pcmk based ha stack, which includes DLM, corosync and pacemaker
services.
The customers complained they could not mount existent ocfs2 volume in
the single node without ha stack, e.g. single node backup/restore
scenario.
Like this case, the customers just want to access the data from the
existent ocfs2 volume quickly, but do not want to restart or setup ha
stack.
Then, I'd like to add a mount option "nocluster", if the users use this
option to mount a ocfs2 shared volume, the whole mount will not depend
on the ha related services. the command will mount the existent ocfs2
volume directly (like local mount), for avoiding setup the ha stack.
Signed-off-by: Gang He <ghe@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Link: http://lkml.kernel.org/r/20200423053300.22661-1-ghe@suse.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jules Irenge [Tue, 2 Jun 2020 04:45:26 +0000 (21:45 -0700)]
ocfs2: add missing annotation for dlm_empty_lockres()
Sparse reports a warning at dlm_empty_lockres()
warning: context imbalance in dlm_purge_lockres() - unexpected unlock
The root cause is the missing annotation at dlm_purge_lockres()
Add the missing __must_hold(&dlm->spinlock)
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Link: http://lkml.kernel.org/r/20200403160505.2832-4-jbi.octave@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Philippe Liard [Tue, 2 Jun 2020 04:45:23 +0000 (21:45 -0700)]
squashfs: migrate from ll_rw_block usage to BIO
ll_rw_block() function has been deprecated in favor of BIO which appears
to come with large performance improvements.
This patch decreases boot time by close to 40% when using squashfs for
the root file-system. This is observed at least in the context of
starting an Android VM on Chrome OS using crosvm. The patch was tested
on 4.19 as well as master.
This patch is largely based on Adrien Schildknecht's patch that was
originally sent as https://lkml.org/lkml/2017/9/22/814 though with some
significant changes and simplifications while also taking Phillip
Lougher's feedback into account, around preserving support for
FILE_CACHE in particular.
[akpm@linux-foundation.org: fix build error reported by Randy]
Link: http://lkml.kernel.org/r/319997c2-5fc8-f889-2ea3-d913308a7c1f@infradead.org
Signed-off-by: Philippe Liard <pliard@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Adrien Schildknecht <adrien+dev@schischi.me>
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Daniel Rosenberg <drosen@google.com>
Link: https://chromium.googlesource.com/chromiumos/platform/crosvm
Link: http://lkml.kernel.org/r/20191106074238.186023-1-pliard@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 1 Jun 2020 19:24:14 +0000 (12:24 -0700)]
Merge tag 'x86_cache_updates_for_5.8' of git://git./linux/kernel/git/tip/tip
Pull x86 cache resource control updates from Borislav Petkov:
"Add support for wider Memory Bandwidth Monitoring counters by querying
their width from CPUID.
As a prerequsite for that, streamline and unify the CPUID detection of
the respective resource control attributes.
By Reinette Chatre"
* tag 'x86_cache_updates_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Support wider MBM counters
x86/resctrl: Support CPUID enumeration of MBM counter width
x86/resctrl: Maintain MBM counter width per resource
x86/resctrl: Query LLC monitoring properties once during boot
x86/resctrl: Remove unnecessary RMID checks
x86/cpu: Move resctrl CPUID code to resctrl/
x86/resctrl: Rename asm/resctrl_sched.h to asm/resctrl.h
Linus Torvalds [Mon, 1 Jun 2020 19:22:53 +0000 (12:22 -0700)]
Merge tag 'x86_microcode_for_5.8' of git://git./linux/kernel/git/tip/tip
Pull x86 microcode update from Borislav Petkov:
"A single fix for late microcode loading to handle the correct return
value from stop_machine(), from Mihai Carabas"
* tag 'x86_microcode_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode: Fix return value for microcode late loading
Linus Torvalds [Mon, 1 Jun 2020 19:21:34 +0000 (12:21 -0700)]
Merge tag 'edac_updates_for_5.8' of git://git./linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- Fix i10nm_edac loading on some Ice Lake and Tremont/Jacobsville
steppings due to the offset change of the bus number configuration
register, by Qiuxu Zhuo.
- The usual cleanups and fixes all over the place.
* tag 'edac_updates_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/amd64: Remove redundant assignment to variable ret in hw_info_get()
EDAC/skx: Use the mcmtr register to retrieve close_pg/bank_xor_enable
EDAC/i10nm: Update driver to support different bus number config register offsets
EDAC, {skx,i10nm}: Make some configurations CPU model specific
EDAC/amd8131: Remove defined but not used bridge_str
EDAC/thunderx: Make symbols static
MAINTAINERS: Remove sifive_l2_cache.c from EDAC-SIFIVE pattern
EDAC/xgene: Remove set but not used address local var
EDAC/armada_xp: Fix some log messages
Linus Torvalds [Mon, 1 Jun 2020 19:13:30 +0000 (12:13 -0700)]
Merge tag 'printk-for-5.8' of git://git./linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Benjamin Herrenschmidt solved a problem with non-matched console
aliases by first checking consoles defined on the command line. It is
a more conservative approach than the previous attempts.
- Benjamin also made sure that the console accessible via /dev/console
always has CON_CONSDEV flag.
- Andy Shevchenko added the %ptT modifier for printing struct time64_t.
It extends the existing %ptR handling for struct rtc_time.
- Bruno Meneguele fixed /dev/kmsg error value returned by unsupported
SEEK_CUR.
- Tetsuo Handa removed unused pr_cont_once().
... and a few small fixes.
* tag 'printk-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: Remove pr_cont_once()
printk: handle blank console arguments passed in.
kernel/printk: add kmsg SEEK_CUR handling
printk: Fix a typo in comment "interator"->"iterator"
usb: pulse8-cec: Switch to use %ptT
ARM: bcm2835: Switch to use %ptT
lib/vsprintf: Print time64_t in human readable format
lib/vsprintf: update comment about simple_strto<foo>() functions
printk: Correctly set CON_CONSDEV even when preferred console was not registered
printk: Fix preferred console selection with multiple matches
printk: Move console matching logic into a separate function
printk: Convert a use of sprintf to snprintf in console_unlock
Linus Torvalds [Mon, 1 Jun 2020 19:11:56 +0000 (12:11 -0700)]
Merge tag 'fsverity-for-linus' of git://git./fs/fscrypt/fscrypt
Pull fsverity updates from Eric Biggers:
"Fix kerneldoc warnings and some coding style inconsistencies.
This mirrors the similar cleanups being done in fs/crypto/"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fs-verity: remove unnecessary extern keywords
fs-verity: fix all kerneldoc warnings
Linus Torvalds [Mon, 1 Jun 2020 19:10:17 +0000 (12:10 -0700)]
Merge tag 'fscrypt-for-linus' of git://git./fs/fscrypt/fscrypt
Pull fscrypt updates from Eric Biggers:
- Add the IV_INO_LBLK_32 encryption policy flag which modifies the
encryption to be optimized for eMMC inline encryption hardware.
- Make the test_dummy_encryption mount option for ext4 and f2fs support
v2 encryption policies.
- Fix kerneldoc warnings and some coding style inconsistencies.
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fscrypt: add support for IV_INO_LBLK_32 policies
fscrypt: make test_dummy_encryption use v2 by default
fscrypt: support test_dummy_encryption=v2
fscrypt: add fscrypt_add_test_dummy_key()
linux/parser.h: add include guards
fscrypt: remove unnecessary extern keywords
fscrypt: name all function parameters
fscrypt: fix all kerneldoc warnings
Linus Torvalds [Mon, 1 Jun 2020 19:07:34 +0000 (12:07 -0700)]
Merge tag 'pstore-v5.8-rc1' of git://git./linux/kernel/git/kees/linux
Pull pstore updates from Kees Cook:
"Fixes and new features for pstore.
This is a pretty big set of changes (relative to past pstore pulls),
but it has been in -next for a while. The biggest change here is the
ability to support a block device as a pstore backend, which has been
desired for a while. A lot of additional fixes and refactorings are
also included, mostly in support of the new features.
- refactor pstore locking for safer module unloading (Kees Cook)
- remove orphaned records from pstorefs when backend unloaded (Kees
Cook)
- refactor dump_oops parameter into max_reason (Pavel Tatashin)
- introduce pstore/zone for common code for contiguous storage
(WeiXiong Liao)
- introduce pstore/blk for block device backend (WeiXiong Liao)
- introduce mtd backend (WeiXiong Liao)"
* tag 'pstore-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (35 commits)
mtd: Support kmsg dumper based on pstore/blk
pstore/blk: Introduce "best_effort" mode
pstore/blk: Support non-block storage devices
pstore/blk: Provide way to query pstore configuration
pstore/zone: Provide way to skip "broken" zone for MTD devices
Documentation: Add details for pstore/blk
pstore/zone,blk: Add ftrace frontend support
pstore/zone,blk: Add console frontend support
pstore/zone,blk: Add support for pmsg frontend
pstore/blk: Introduce backend for block devices
pstore/zone: Introduce common layer to manage storage zones
ramoops: Add "max-reason" optional field to ramoops DT node
pstore/ram: Introduce max_reason and convert dump_oops
pstore/platform: Pass max_reason to kmesg dump
printk: Introduce kmsg_dump_reason_str()
printk: honor the max_reason field in kmsg_dumper
printk: Collapse shutdown types into a single dump reason
pstore/ftrace: Provide ftrace log merging routine
pstore/ram: Refactor ftrace buffer merging
pstore/ram: Refactor DT size parsing
...
Linus Torvalds [Mon, 1 Jun 2020 19:00:10 +0000 (12:00 -0700)]
Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Introduce crypto_shash_tfm_digest() and use it wherever possible.
- Fix use-after-free and race in crypto_spawn_alg.
- Add support for parallel and batch requests to crypto_engine.
Algorithms:
- Update jitter RNG for SP800-90B compliance.
- Always use jitter RNG as seed in drbg.
Drivers:
- Add Arm CryptoCell driver cctrng.
- Add support for SEV-ES to the PSP driver in ccp"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (114 commits)
crypto: hisilicon - fix driver compatibility issue with different versions of devices
crypto: engine - do not requeue in case of fatal error
crypto: cavium/nitrox - Fix a typo in a comment
crypto: hisilicon/qm - change debugfs file name from qm_regs to regs
crypto: hisilicon/qm - add DebugFS for xQC and xQE dump
crypto: hisilicon/zip - add debugfs for Hisilicon ZIP
crypto: hisilicon/hpre - add debugfs for Hisilicon HPRE
crypto: hisilicon/sec2 - add debugfs for Hisilicon SEC
crypto: hisilicon/qm - add debugfs to the QM state machine
crypto: hisilicon/qm - add debugfs for QM
crypto: stm32/crc32 - protect from concurrent accesses
crypto: stm32/crc32 - don't sleep in runtime pm
crypto: stm32/crc32 - fix multi-instance
crypto: stm32/crc32 - fix run-time self test issue.
crypto: stm32/crc32 - fix ext4 chksum BUG_ON()
crypto: hisilicon/zip - Use temporary sqe when doing work
crypto: hisilicon - add device error report through abnormal irq
crypto: hisilicon - remove codes of directly report device errors through MSI
crypto: hisilicon - QM memory management optimization
crypto: hisilicon - unify initial value assignment into QM
...
Linus Torvalds [Mon, 1 Jun 2020 18:53:50 +0000 (11:53 -0700)]
Merge tag 'i3c/for-5.8' of git://git./linux/kernel/git/i3c/linux
Pull i3c update from Boris Brezillon:
"Fix GETMRL's logic"
* tag 'i3c/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c master: GETMRL's 3rd byte is optional even with BCR_IBI_PAYLOAD
Linus Torvalds [Mon, 1 Jun 2020 18:45:02 +0000 (11:45 -0700)]
Merge tag 'regulator-v5.8' of git://git./linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"The big change in this release is that Matti Vaittinen has factored
out the linear ranges support into a separate library in lib/ since it
is also useful for at least the power subsystem (and most likely
others too), it helps subsystems which need to map register values
into more useful real world values do so with minimal per-driver code.
- Factoring out of the linear ranges support into a library in lib/
from Matti Vaittinen.
- Trace points for bypass mode.
- Use the consumer name in debugfs to make it easier to understand.
- New drivers for Maxim MAX77826 and MAX8998"
* tag 'regulator-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (23 commits)
regulator: max8998: max8998_set_current_limit() can be static
dt-bindings: regulator: Convert anatop regulator to json-schema
regulator: core: Add regulator bypass trace points
regulator: extract voltage balancing code to the separate function
regulator/mfd: max8998: Document charger regulator
regulator: max8998: Add charger regulator
MAINTAINERS: Add maintainer entry for linear ranges helper
regulator: bd718x7: remove voltage change restriction from BD71847 LDOs
lib: linear_ranges: Add missing MODULE_LICENSE()
regulator: use linear_ranges helper
power: supply: bd70528: rename linear_range to avoid collision
lib/test_linear_ranges: add a test for the 'linear_ranges'
lib: add linear ranges helpers
regulator: db8500-prcmu: Use true,false for bool variable
regulator: bd718x7: remove voltage change restriction from BD71847
regulator: max77826: Remove erroneous additionalProperties
regulator: qcom-rpmh: Fix typos in pm8150 and pm8150l
regulator: Document bindings for max77826
regulator: max77826: Add max77826 regulator driver
regulator: tps80031: remove redundant assignment to variables ret and val
...
Linus Torvalds [Mon, 1 Jun 2020 18:42:38 +0000 (11:42 -0700)]
Merge tag 'spi-v5.8' of git://git./linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This has been a very active release for the DesignWare driver in
particular - after a long period of inactivity we have had a lot of
people actively working on it for unrelated reasons this cycle with
some of that work still not landed.
Otherwise it's been fairly quiet for the subsystem.
Highlights include:
- Lots of performance improvements and fixes for the DesignWare
driver from Serge Semin, Andy Shevchenko, Wan Ahmad Zainie, Clement
Leger, Dinh Nguyen and Jarkko Nikula.
- Support for octal mode transfers in spidev.
- Slave mode support for the Rockchip drivers.
- Support for AMD controllers, Broadcom mspi and Raspberry Pi 4, and
Intel Elkhart Lake"
* tag 'spi-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (125 commits)
spi: spi-fsl-dspi: fix native data copy
spi: Convert DW SPI binding to DT schema
spi: dw: Refactor mid_spi_dma_setup() to separate DMA and IRQ config
spi: dw: Make DMA request line assignments explicit for Intel Medfield
spi: bcm2835: Remove shared interrupt support
dt-bindings: snps,dw-apb-ssi: add optional reset property
spi: dw: add reset control
spi: bcm2835: Enable shared interrupt support
spi: bcm2835: Implement shutdown callback
spi: dw: Use regset32 DebugFS method to create regdump file
spi: dw: Add DMA support to the DW SPI MMIO driver
spi: dw: Cleanup generic DW DMA code namings
spi: dw: Add DW SPI DMA/PCI/MMIO dependency on the DW SPI core
spi: dw: Remove DW DMA code dependency from DW_DMAC_PCI
spi: dw: Move Non-DMA code to the DW PCIe-SPI driver
spi: dw: Add core suffix to the DW APB SSI core source file
spi: dw: Fix Rx-only DMA transfers
spi: dw: Use DMA max burst to set the request thresholds
spi: dw: Parameterize the DMA Rx/Tx burst length
spi: dw: Add SPI Rx-done wait method to DMA-based transfer
...
Linus Torvalds [Mon, 1 Jun 2020 18:39:37 +0000 (11:39 -0700)]
Merge tag 'regmap-v5.8' of git://git./linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"This has been a very active release for the regmap API for some
reason, a lot of it due to new devices with odd requirements that can
sensibly be handled here.
- Add support for buses implementing a custom reg_update_bits()
method in case the bus has a native operation for this.
- Support 16 bit register addresses in SMBus.
- Allow customization of the device attached to regmap-irq.
- Helpers for bitfield operations and per-port field initializations"
* tag 'regmap-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: provide helpers for simple bit operations
regmap: add helper for per-port regfield initialization
regmap-i2c: add 16-bit width registers support
regmap: Simplify implementation of the regmap_field_read_poll_timeout() macro
regmap: Simplify implementation of the regmap_read_poll_timeout() macro
regmap: add reg_sequence helpers
regmap-irq: make it possible to add irq_chip do a specific device node
regmap: Add bus reg_update_bits() support
regmap: debugfs: check count when read regmap file
Linus Torvalds [Mon, 1 Jun 2020 18:33:40 +0000 (11:33 -0700)]
Merge tag 'hwmon-for-v5.8' of git://git./linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"Infrastructure:
- Add notification support
New drivers:
- Baikal-T1 PVT sensor driver
- amd_energy driver to report energy counters
- Driver for Maxim MAX16601
- Gateworks System Controller
Various:
- applesmc: avoid overlong udelay()
- dell-smm: Use one DMI match for all XPS models
- ina2xx: Implement alert functions
- lm70: Add support for ACPI
- lm75: Fix coding-style warnings
- lm90: Add max6654 support to lm90 driver
- nct7802: Replace container_of() API
- nct7904: Set default timeout
- nct7904: Add watchdog function
- pmbus: Improve initialization of 'currpage' and 'currphase'"
* tag 'hwmon-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (24 commits)
hwmon: Add Baikal-T1 PVT sensor driver
hwmon: Add notification support
dt-bindings: hwmon: Add Baikal-T1 PVT sensor binding
hwmon: (applesmc) avoid overlong udelay()
hwmon: (nct7904) Set default timeout
hwmon: (amd_energy) Missing platform_driver_unregister() on error in amd_energy_init()
MAINTAINERS: add entry for AMD energy driver
hwmon: (amd_energy) Add documentation
hwmon: Add amd_energy driver to report energy counters
hwmon: (nct7802) Replace container_of() API
hwmon: (lm90) Add max6654 support to lm90 driver
hwmon : (nct6775) Use kobj_to_dev() API
hwmon: (pmbus) Driver for Maxim MAX16601
hwmon: (pmbus) Improve initialization of 'currpage' and 'currphase'
hwmon: (adt7411) update contact email
hwmon: (lm75) Fix all coding-style warnings on lm75 driver
hwmon: Reduce indentation level in __hwmon_device_register()
hwmon: (ina2xx) Implement alert functions
hwmon: (lm70) Add support for ACPI
hwmon: (dell-smm) Use one DMI match for all XPS models
...
Linus Torvalds [Mon, 1 Jun 2020 18:30:28 +0000 (11:30 -0700)]
Merge tag 'tpmdd-next-
20200522' of git://git.infradead.org/users/jjs/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen.
* tag 'tpmdd-next-
20200522' of git://git.infradead.org/users/jjs/linux-tpmdd:
tpm: eventlog: Replace zero-length array with flexible-array member
tpm/tpm_ftpm_tee: Use UUID API for exporting the UUID
Mark Brown [Mon, 1 Jun 2020 12:01:44 +0000 (13:01 +0100)]
Merge remote-tracking branch 'regulator/for-5.8' into regulator-linus
Mark Brown [Mon, 1 Jun 2020 12:01:42 +0000 (13:01 +0100)]
Merge remote-tracking branch 'regulator/for-5.7' into regulator-linus
kbuild test robot [Sat, 30 May 2020 13:03:14 +0000 (21:03 +0800)]
regulator: max8998: max8998_set_current_limit() can be static
Fixes:
4ffea5e083f8 ("regulator: max8998: Add charger regulator")
Signed-off-by: kbuild test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20200530130314.GA73557@d7d8dbfb64ff
Signed-off-by: Mark Brown <broonie@kernel.org>
Borislav Petkov [Mon, 1 Jun 2020 09:39:15 +0000 (11:39 +0200)]
Merge branches 'edac-i10nm' and 'edac-misc' into edac-updates-for-5.8
Signed-off-by: Borislav Petkov <bp@suse.de>
Petr Mladek [Mon, 1 Jun 2020 08:15:43 +0000 (10:15 +0200)]
Merge branch 'for-5.8-printf-time64_t' into for-linus
Petr Mladek [Mon, 1 Jun 2020 08:15:16 +0000 (10:15 +0200)]
Merge branch 'for-5.8' into for-linus
Petr Mladek [Mon, 1 Jun 2020 08:13:51 +0000 (10:13 +0200)]
Merge branch 'for-5.7-preferred-console' into for-linus
WeiXiong Liao [Wed, 25 Mar 2020 08:55:06 +0000 (16:55 +0800)]
mtd: Support kmsg dumper based on pstore/blk
This introduces mtdpstore, which is similar to mtdoops but more
powerful. It uses pstore/blk, and aims to store panic and oops logs to
a flash partition, where pstore can later read back and present as files
in the mounted pstore filesystem.
To make mtdpstore work, the "blkdev" of pstore/blk should be set
as MTD device name or MTD device number. For more details, see
Documentation/admin-guide/pstore-blk.rst
This solves a number of issues:
- Work duplication: both of pstore and mtdoops do the same job storing
panic/oops log. They have very similar logic, registering to kmsg
dumper and storing logs to several chunks one by one.
- Layer violations: drivers should provides methods instead of polices.
MTD should provide read/write/erase operations, and allow a higher
level drivers to provide the chunk management, kmsg dump
configuration, etc.
- Missing features: pstore provides many additional features, including
presenting the logs as files, logging dump time and count, and
supporting other frontends like pmsg, console, etc.
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-11-keescook@chromium.org/
Link: https://lore.kernel.org/r/1589266715-4168-1-git-send-email-liaoweixiong@allwinnertech.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Kees Cook [Fri, 8 May 2020 15:34:01 +0000 (08:34 -0700)]
pstore/blk: Introduce "best_effort" mode
In order to use arbitrary block devices as a pstore backend, provide a
new module param named "best_effort", which will allow using any block
device, even if it has not provided a panic_write callback.
Link: https://lore.kernel.org/lkml/20200511233229.27745-12-keescook@chromium.org/
Signed-off-by: Kees Cook <keescook@chromium.org>
WeiXiong Liao [Wed, 25 Mar 2020 08:55:05 +0000 (16:55 +0800)]
pstore/blk: Support non-block storage devices
Add support for non-block devices (e.g. MTD). A non-block driver calls
pstore_blk_register_device() to register iself.
In addition, pstore/zone is updated to handle non-block devices,
where an erase must be done before a write. Without this, there is no
way to remove records stored to an MTD.
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-10-keescook@chromium.org/
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
WeiXiong Liao [Wed, 25 Mar 2020 08:55:04 +0000 (16:55 +0800)]
pstore/blk: Provide way to query pstore configuration
In order to configure itself, the MTD backend needs to be able to query
the current pstore configuration. Introduce pstore_blk_get_config() for
this purpose.
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-9-keescook@chromium.org/
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
WeiXiong Liao [Wed, 25 Mar 2020 08:55:03 +0000 (16:55 +0800)]
pstore/zone: Provide way to skip "broken" zone for MTD devices
One requirement to support MTD devices in pstore/zone is having a
way to declare certain regions as broken. Add this support to
pstore/zone.
The MTD driver should return -ENOMSG when encountering a bad region,
which tells pstore/zone to skip and try the next one.
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-8-keescook@chromium.org/
Co-developed-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: //lore.kernel.org/lkml/
20200512173801.222666-1-colin.king@canonical.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Linus Torvalds [Sun, 31 May 2020 23:49:15 +0000 (16:49 -0700)]
Linux 5.7
Joe Perches [Fri, 29 May 2020 23:12:21 +0000 (16:12 -0700)]
checkpatch/coding-style: deprecate 80-column warning
Yes, staying withing 80 columns is certainly still _preferred_. But
it's not the hard limit that the checkpatch warnings imply, and other
concerns can most certainly dominate.
Increase the default limit to 100 characters. Not because 100
characters is some hard limit either, but that's certainly a "what are
you doing" kind of value and less likely to be about the occasional
slightly longer lines.
Miscellanea:
- to avoid unnecessary whitespace changes in files, checkpatch will no
longer emit a warning about line length when scanning files unless
--strict is also used
- Add a bit to coding-style about alignment to open parenthesis
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 31 May 2020 17:45:11 +0000 (10:45 -0700)]
Merge tag 'x86-urgent-2020-05-31' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A pile of x86 fixes:
- Prevent a memory leak in ioperm which was caused by the stupid
assumption that the exit cleanup is always called for current,
which is not the case when fork fails after taking a reference on
the ioperm bitmap.
- Fix an arithmething overflow in the DMA code on 32bit systems
- Fill gaps in the xstate copy with defaults instead of leaving them
uninitialized
- Revert: "Make __X32_SYSCALL_BIT be unsigned long" as it turned out
that existing user space fails to build"
* tag 'x86-urgent-2020-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ioperm: Prevent a memory leak when fork fails
x86/dma: Fix max PFN arithmetic overflow on 32 bit systems
copy_xstate_to_kernel(): don't leave parts of destination uninitialized
x86/syscalls: Revert "x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long"
Linus Torvalds [Sun, 31 May 2020 17:43:17 +0000 (10:43 -0700)]
Merge tag 'sched-urgent-2020-05-31' of git://git./linux/kernel/git/tip/tip
Pull scheduler fix from Thomas Gleixner:
"A single scheduler fix preventing a crash in NUMA balancing.
The current->mm check is not reliable as the mm might be temporary due
to use_mm() in a kthread. Check for PF_KTHREAD explictly"
* tag 'sched-urgent-2020-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Don't NUMA balance for kthreads
Linus Torvalds [Sun, 31 May 2020 17:16:53 +0000 (10:16 -0700)]
Merge git://git./linux/kernel/git/netdev/net
Pull networking fixes from David Miller:
"Another week, another set of bug fixes:
1) Fix pskb_pull length in __xfrm_transport_prep(), from Xin Long.
2) Fix double xfrm_state put in esp{4,6}_gro_receive(), also from Xin
Long.
3) Re-arm discovery timer properly in mac80211 mesh code, from Linus
Lüssing.
4) Prevent buffer overflows in nf_conntrack_pptp debug code, from
Pablo Neira Ayuso.
5) Fix race in ktls code between tls_sw_recvmsg() and
tls_decrypt_done(), from Vinay Kumar Yadav.
6) Fix crashes on TCP fallback in MPTCP code, from Paolo Abeni.
7) More validation is necessary of untrusted GSO packets coming from
virtualization devices, from Willem de Bruijn.
8) Fix endianness of bnxt_en firmware message length accesses, from
Edwin Peer.
9) Fix infinite loop in sch_fq_pie, from Davide Caratti.
10) Fix lockdep splat in DSA by setting lockless TX in netdev features
for slave ports, from Vladimir Oltean.
11) Fix suspend/resume crashes in mlx5, from Mark Bloch.
12) Fix use after free in bpf fmod_ret, from Alexei Starovoitov.
13) ARP retransmit timer guard uses wrong offset, from Hongbin Liu.
14) Fix leak in inetdev_init(), from Yang Yingliang.
15) Don't try to use inet hash and unhash in l2tp code, results in
crashes. From Eric Dumazet"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits)
l2tp: add sk_family checks to l2tp_validate_socket
l2tp: do not use inet_hash()/inet_unhash()
net: qrtr: Allocate workqueue before kernel_bind
mptcp: remove msk from the token container at destruction time.
mptcp: fix race between MP_JOIN and close
mptcp: fix unblocking connect()
net/sched: act_ct: add nat mangle action only for NAT-conntrack
devinet: fix memleak in inetdev_init()
virtio_vsock: Fix race condition in virtio_transport_recv_pkt
drivers/net/ibmvnic: Update VNIC protocol version reporting
NFC: st21nfca: add missed kfree_skb() in an error path
neigh: fix ARP retransmit timer guard
bpf, selftests: Add a verifier test for assigning 32bit reg states to 64bit ones
bpf, selftests: Verifier bounds tests need to be updated
bpf: Fix a verifier issue when assigning 32bit reg states to 64bit ones
bpf: Fix use-after-free in fmod_ret check
net/mlx5e: replace EINVAL in mlx5e_flower_parse_meta()
net/mlx5e: Fix MLX5_TC_CT dependencies
net/mlx5e: Properly set default values when disabling adaptive moderation
net/mlx5e: Fix arch depending casting issue in FEC
...
Eric Dumazet [Fri, 29 May 2020 18:32:25 +0000 (11:32 -0700)]
l2tp: add sk_family checks to l2tp_validate_socket
syzbot was able to trigger a crash after using an ISDN socket
and fool l2tp.
Fix this by making sure the UDP socket is of the proper family.
BUG: KASAN: slab-out-of-bounds in setup_udp_tunnel_sock+0x465/0x540 net/ipv4/udp_tunnel.c:78
Write of size 1 at addr
ffff88808ed0c590 by task syz-executor.5/3018
CPU: 0 PID: 3018 Comm: syz-executor.5 Not tainted 5.7.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x188/0x20d lib/dump_stack.c:118
print_address_description.constprop.0.cold+0xd3/0x413 mm/kasan/report.c:382
__kasan_report.cold+0x20/0x38 mm/kasan/report.c:511
kasan_report+0x33/0x50 mm/kasan/common.c:625
setup_udp_tunnel_sock+0x465/0x540 net/ipv4/udp_tunnel.c:78
l2tp_tunnel_register+0xb15/0xdd0 net/l2tp/l2tp_core.c:1523
l2tp_nl_cmd_tunnel_create+0x4b2/0xa60 net/l2tp/l2tp_netlink.c:249
genl_family_rcv_msg_doit net/netlink/genetlink.c:673 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:718 [inline]
genl_rcv_msg+0x627/0xdf0 net/netlink/genetlink.c:735
netlink_rcv_skb+0x15a/0x410 net/netlink/af_netlink.c:2469
genl_rcv+0x24/0x40 net/netlink/genetlink.c:746
netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline]
netlink_unicast+0x537/0x740 net/netlink/af_netlink.c:1329
netlink_sendmsg+0x882/0xe10 net/netlink/af_netlink.c:1918
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:672
____sys_sendmsg+0x6e6/0x810 net/socket.c:2352
___sys_sendmsg+0x100/0x170 net/socket.c:2406
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2439
do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295
entry_SYSCALL_64_after_hwframe+0x49/0xb3
RIP: 0033:0x45ca29
Code: 0d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:
00007effe76edc78 EFLAGS:
00000246 ORIG_RAX:
000000000000002e
RAX:
ffffffffffffffda RBX:
00000000004fe1c0 RCX:
000000000045ca29
RDX:
0000000000000000 RSI:
0000000020000240 RDI:
0000000000000005
RBP:
000000000078bf00 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
00000000ffffffff
R13:
000000000000094e R14:
00000000004d5d00 R15:
00007effe76ee6d4
Allocated by task 3018:
save_stack+0x1b/0x40 mm/kasan/common.c:49
set_track mm/kasan/common.c:57 [inline]
__kasan_kmalloc mm/kasan/common.c:495 [inline]
__kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:468
__do_kmalloc mm/slab.c:3656 [inline]
__kmalloc+0x161/0x7a0 mm/slab.c:3665
kmalloc include/linux/slab.h:560 [inline]
sk_prot_alloc+0x223/0x2f0 net/core/sock.c:1612
sk_alloc+0x36/0x1100 net/core/sock.c:1666
data_sock_create drivers/isdn/mISDN/socket.c:600 [inline]
mISDN_sock_create+0x272/0x400 drivers/isdn/mISDN/socket.c:796
__sock_create+0x3cb/0x730 net/socket.c:1428
sock_create net/socket.c:1479 [inline]
__sys_socket+0xef/0x200 net/socket.c:1521
__do_sys_socket net/socket.c:1530 [inline]
__se_sys_socket net/socket.c:1528 [inline]
__x64_sys_socket+0x6f/0xb0 net/socket.c:1528
do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295
entry_SYSCALL_64_after_hwframe+0x49/0xb3
Freed by task 2484:
save_stack+0x1b/0x40 mm/kasan/common.c:49
set_track mm/kasan/common.c:57 [inline]
kasan_set_free_info mm/kasan/common.c:317 [inline]
__kasan_slab_free+0xf7/0x140 mm/kasan/common.c:456
__cache_free mm/slab.c:3426 [inline]
kfree+0x109/0x2b0 mm/slab.c:3757
kvfree+0x42/0x50 mm/util.c:603
__free_fdtable+0x2d/0x70 fs/file.c:31
put_files_struct fs/file.c:420 [inline]
put_files_struct+0x248/0x2e0 fs/file.c:413
exit_files+0x7e/0xa0 fs/file.c:445
do_exit+0xb04/0x2dd0 kernel/exit.c:791
do_group_exit+0x125/0x340 kernel/exit.c:894
get_signal+0x47b/0x24e0 kernel/signal.c:2739
do_signal+0x81/0x2240 arch/x86/kernel/signal.c:784
exit_to_usermode_loop+0x26c/0x360 arch/x86/entry/common.c:161
prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline]
syscall_return_slowpath arch/x86/entry/common.c:279 [inline]
do_syscall_64+0x6b1/0x7d0 arch/x86/entry/common.c:305
entry_SYSCALL_64_after_hwframe+0x49/0xb3
The buggy address belongs to the object at
ffff88808ed0c000
which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 1424 bytes inside of
2048-byte region [
ffff88808ed0c000,
ffff88808ed0c800)
The buggy address belongs to the page:
page:
ffffea00023b4300 refcount:1 mapcount:0 mapping:
0000000000000000 index:0x0
flags: 0xfffe0000000200(slab)
raw:
00fffe0000000200 ffffea0002838208 ffffea00015ba288 ffff8880aa000e00
raw:
0000000000000000 ffff88808ed0c000 0000000100000001 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88808ed0c480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff88808ed0c500: 00 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc
>
ffff88808ed0c580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff88808ed0c600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88808ed0c680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
Fixes:
6b9f34239b00 ("l2tp: fix races in tunnel creation")
Fixes:
fd558d186df2 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: James Chapman <jchapman@katalix.com>
Cc: Guillaume Nault <gnault@redhat.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 29 May 2020 18:20:53 +0000 (11:20 -0700)]
l2tp: do not use inet_hash()/inet_unhash()
syzbot recently found a way to crash the kernel [1]
Issue here is that inet_hash() & inet_unhash() are currently
only meant to be used by TCP & DCCP, since only these protocols
provide the needed hashinfo pointer.
L2TP uses a single list (instead of a hash table)
This old bug became an issue after commit
610236587600
("bpf: Add new cgroup attach type to enable sock modifications")
since after this commit, sk_common_release() can be called
while the L2TP socket is still considered 'hashed'.
general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 PID: 7063 Comm: syz-executor654 Not tainted 5.7.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:inet_unhash+0x11f/0x770 net/ipv4/inet_hashtables.c:600
Code: 03 0f b6 04 02 84 c0 74 08 3c 03 0f 8e dd 04 00 00 48 8d 7d 08 44 8b 73 08 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 55 05 00 00 48 8d 7d 14 4c 8b 6d 08 48 b8 00 00
RSP: 0018:
ffffc90001777d30 EFLAGS:
00010202
RAX:
dffffc0000000000 RBX:
ffff88809a6df940 RCX:
ffffffff8697c242
RDX:
0000000000000001 RSI:
ffffffff8697c251 RDI:
0000000000000008
RBP:
0000000000000000 R08:
ffff88809f3ae1c0 R09:
fffffbfff1514cc1
R10:
ffffffff8a8a6607 R11:
fffffbfff1514cc0 R12:
ffff88809a6df9b0
R13:
0000000000000007 R14:
0000000000000000 R15:
ffffffff873a4d00
FS:
0000000001d2b880(0000) GS:
ffff8880ae600000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00000000006cd090 CR3:
000000009403a000 CR4:
00000000001406f0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
sk_common_release+0xba/0x370 net/core/sock.c:3210
inet_create net/ipv4/af_inet.c:390 [inline]
inet_create+0x966/0xe00 net/ipv4/af_inet.c:248
__sock_create+0x3cb/0x730 net/socket.c:1428
sock_create net/socket.c:1479 [inline]
__sys_socket+0xef/0x200 net/socket.c:1521
__do_sys_socket net/socket.c:1530 [inline]
__se_sys_socket net/socket.c:1528 [inline]
__x64_sys_socket+0x6f/0xb0 net/socket.c:1528
do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295
entry_SYSCALL_64_after_hwframe+0x49/0xb3
RIP: 0033:0x441e29
Code: e8 fc b3 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:
00007ffdce184148 EFLAGS:
00000246 ORIG_RAX:
0000000000000029
RAX:
ffffffffffffffda RBX:
0000000000000003 RCX:
0000000000441e29
RDX:
0000000000000073 RSI:
0000000000000002 RDI:
0000000000000002
RBP:
0000000000000000 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
0000000000000000
R13:
0000000000402c30 R14:
0000000000000000 R15:
0000000000000000
Modules linked in:
---[ end trace
23b6578228ce553e ]---
RIP: 0010:inet_unhash+0x11f/0x770 net/ipv4/inet_hashtables.c:600
Code: 03 0f b6 04 02 84 c0 74 08 3c 03 0f 8e dd 04 00 00 48 8d 7d 08 44 8b 73 08 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 55 05 00 00 48 8d 7d 14 4c 8b 6d 08 48 b8 00 00
RSP: 0018:
ffffc90001777d30 EFLAGS:
00010202
RAX:
dffffc0000000000 RBX:
ffff88809a6df940 RCX:
ffffffff8697c242
RDX:
0000000000000001 RSI:
ffffffff8697c251 RDI:
0000000000000008
RBP:
0000000000000000 R08:
ffff88809f3ae1c0 R09:
fffffbfff1514cc1
R10:
ffffffff8a8a6607 R11:
fffffbfff1514cc0 R12:
ffff88809a6df9b0
R13:
0000000000000007 R14:
0000000000000000 R15:
ffffffff873a4d00
FS:
0000000001d2b880(0000) GS:
ffff8880ae600000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00000000006cd090 CR3:
000000009403a000 CR4:
00000000001406f0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Fixes:
0d76751fad77 ("l2tp: Add L2TPv3 IP encapsulation (no UDP) support")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: James Chapman <jchapman@katalix.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Reported-by: syzbot+3610d489778b57cc8031@syzkaller.appspotmail.com
Chris Lew [Thu, 28 May 2020 23:05:26 +0000 (16:05 -0700)]
net: qrtr: Allocate workqueue before kernel_bind
A null pointer dereference in qrtr_ns_data_ready() is seen if a client
opens a qrtr socket before qrtr_ns_init() can bind to the control port.
When the control port is bound, the ENETRESET error will be broadcasted
and clients will close their sockets. This results in DEL_CLIENT
packets being sent to the ns and qrtr_ns_data_ready() being called
without the workqueue being allocated.
Allocate the workqueue before setting sk_data_ready and binding to the
control port. This ensures that the work and workqueue structs are
allocated and initialized before qrtr_ns_data_ready can be called.
Fixes:
0c2204a4ad71 ("net: qrtr: Migrate nameservice to kernel from userspace")
Signed-off-by: Chris Lew <clew@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 31 May 2020 04:39:13 +0000 (21:39 -0700)]
Merge branch 'mptcp-a-bunch-of-fixes'
Paolo Abeni says:
====================
mptcp: a bunch of fixes
This patch series pulls together a few bugfixes for MPTCP bug observed while
doing stress-test with apache bench - forced to use MPTCP and multiple
subflows.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Fri, 29 May 2020 15:43:31 +0000 (17:43 +0200)]
mptcp: remove msk from the token container at destruction time.
Currently we remote the msk from the token container only
via mptcp_close(). The MPTCP master socket can be destroyed
also via other paths (e.g. if not yet accepted, when shutting
down the listener socket). When we hit the latter scenario,
dangling msk references are left into the token container,
leading to memory corruption and/or UaF.
This change addresses the issue by moving the token removal
into the msk destructor.
Fixes:
79c0949e9a09 ("mptcp: Add key generation and token tree")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Fri, 29 May 2020 15:43:30 +0000 (17:43 +0200)]
mptcp: fix race between MP_JOIN and close
If a MP_JOIN subflow completes the 3whs while another
CPU is closing the master msk, we can hit the
following race:
CPU1 CPU2
close()
mptcp_close
subflow_syn_recv_sock
mptcp_token_get_sock
mptcp_finish_join
inet_sk_state_load
mptcp_token_destroy
inet_sk_state_store(TCP_CLOSE)
__mptcp_flush_join_list()
mptcp_sock_graft
list_add_tail
sk_common_release
sock_orphan()
<socket free>
The MP_JOIN socket will be leaked. Additionally we can hit
UaF for the msk 'struct socket' referenced via the 'conn'
field.
This change try to address the issue introducing some
synchronization between the MP_JOIN 3whs and mptcp_close
via the join_list spinlock. If we detect the msk is closing
the MP_JOIN socket is closed, too.
Fixes:
f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Fri, 29 May 2020 15:43:29 +0000 (17:43 +0200)]
mptcp: fix unblocking connect()
Currently unblocking connect() on MPTCP sockets fails frequently.
If mptcp_stream_connect() is invoked to complete a previously
attempted unblocking connection, it will still try to create
the first subflow via __mptcp_socket_create(). If the 3whs is
completed and the 'can_ack' flag is already set, the latter
will fail with -EINVAL.
This change addresses the issue checking for pending connect and
delegating the completion to the first subflow. Additionally
do msk addresses and sk_state changes only when needed.
Fixes:
2303f994b3e1 ("mptcp: Associate MPTCP context with TCP socket")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
wenxu [Sat, 30 May 2020 05:54:51 +0000 (13:54 +0800)]
net/sched: act_ct: add nat mangle action only for NAT-conntrack
Currently add nat mangle action with comparing invert and orig tuple.
It is better to check IPS_NAT_MASK flags first to avoid non necessary
memcmp for non-NAT conntrack.
Signed-off-by: wenxu <wenxu@ucloud.cn>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yang Yingliang [Sat, 30 May 2020 03:34:33 +0000 (11:34 +0800)]
devinet: fix memleak in inetdev_init()
When devinet_sysctl_register() failed, the memory allocated
in neigh_parms_alloc() should be freed.
Fixes:
20e61da7ffcf ("ipv4: fail early when creating netdev named all or default")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jia He [Sat, 30 May 2020 01:38:28 +0000 (09:38 +0800)]
virtio_vsock: Fix race condition in virtio_transport_recv_pkt
When client on the host tries to connect(SOCK_STREAM, O_NONBLOCK) to the
server on the guest, there will be a panic on a ThunderX2 (armv8a server):
[ 463.718844] Unable to handle kernel NULL pointer dereference at virtual address
0000000000000000
[ 463.718848] Mem abort info:
[ 463.718849] ESR = 0x96000044
[ 463.718852] EC = 0x25: DABT (current EL), IL = 32 bits
[ 463.718853] SET = 0, FnV = 0
[ 463.718854] EA = 0, S1PTW = 0
[ 463.718855] Data abort info:
[ 463.718856] ISV = 0, ISS = 0x00000044
[ 463.718857] CM = 0, WnR = 1
[ 463.718859] user pgtable: 4k pages, 48-bit VAs, pgdp=
0000008f6f6e9000
[ 463.718861] [
0000000000000000] pgd=
0000000000000000
[ 463.718866] Internal error: Oops:
96000044 [#1] SMP
[...]
[ 463.718977] CPU: 213 PID: 5040 Comm: vhost-5032 Tainted: G O 5.7.0-rc7+ #139
[ 463.718980] Hardware name: GIGABYTE R281-T91-00/MT91-FS1-00, BIOS F06 09/25/2018
[ 463.718982] pstate:
60400009 (nZCv daif +PAN -UAO)
[ 463.718995] pc : virtio_transport_recv_pkt+0x4c8/0xd40 [vmw_vsock_virtio_transport_common]
[ 463.718999] lr : virtio_transport_recv_pkt+0x1fc/0xd40 [vmw_vsock_virtio_transport_common]
[ 463.719000] sp :
ffff80002dbe3c40
[...]
[ 463.719025] Call trace:
[ 463.719030] virtio_transport_recv_pkt+0x4c8/0xd40 [vmw_vsock_virtio_transport_common]
[ 463.719034] vhost_vsock_handle_tx_kick+0x360/0x408 [vhost_vsock]
[ 463.719041] vhost_worker+0x100/0x1a0 [vhost]
[ 463.719048] kthread+0x128/0x130
[ 463.719052] ret_from_fork+0x10/0x18
The race condition is as follows:
Task1 Task2
===== =====
__sock_release virtio_transport_recv_pkt
__vsock_release vsock_find_bound_socket (found sk)
lock_sock_nested
vsock_remove_sock
sock_orphan
sk_set_socket(sk, NULL)
sk->sk_shutdown = SHUTDOWN_MASK
...
release_sock
lock_sock
virtio_transport_recv_connecting
sk->sk_socket->state (panic!)
The root cause is that vsock_find_bound_socket can't hold the lock_sock,
so there is a small race window between vsock_find_bound_socket() and
lock_sock(). If __vsock_release() is running in another task,
sk->sk_socket will be set to NULL inadvertently.
This fixes it by checking sk->sk_shutdown(suggested by Stefano) after
lock_sock since sk->sk_shutdown is set to SHUTDOWN_MASK under the
protection of lock_sock_nested.
Signed-off-by: Jia He <justin.he@arm.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 30 May 2020 19:28:44 +0000 (12:28 -0700)]
Merge tag 'powerpc-5.7-6' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- a fix for the recent change to how we restore non-volatile GPRs,
which broke our emulation of reading from the DSCR (Data Stream
Control Register).
- a fix for the recent rewrite of interrupt/syscall exit in C, we need
to exclude KCOV from that code, otherwise it can lead to
unrecoverable faults.
Thanks to Daniel Axtens.
* tag 'powerpc-5.7-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Disable sanitisers for C syscall/interrupt entry/exit code
powerpc/64s: Fix restore of NV GPRs after facility unavailable exception
Linus Torvalds [Sat, 30 May 2020 19:26:21 +0000 (12:26 -0700)]
Merge tag 'gpio-v5.7-3' of git://git./linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Here are some (very) late fixes for GPIO, none of them very serious
except the one tagged for stable for enabling IRQ on open drain lines:
- Fix probing of mvebu chips without PWM
- Fix error path on ida_get_simple() on the exar driver
- Notify userspace properly about line status changes when flags are
changed on lines.
- Fix a sleeping while holding spinlock in the mellanox driver.
- Fix return value of the PXA and Kona probe calls.
- Fix IRQ locking of open drain lines, it is fine to have IRQs on
open drain lines flagged for output"
* tag 'gpio-v5.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: fix locking open drain IRQ lines
gpio: bcm-kona: Fix return value of bcm_kona_gpio_probe()
gpio: pxa: Fix return value of pxa_gpio_probe()
gpio: mlxbf2: Fix sleeping while holding spinlock
gpiolib: notify user-space about line status changes after flags are set
gpio: exar: Fix bad handling for ida_simple_get error path
gpio: mvebu: Fix probing for chips without PWM
WeiXiong Liao [Wed, 25 Mar 2020 08:55:02 +0000 (16:55 +0800)]
Documentation: Add details for pstore/blk
Add details on using pstore/blk, the new backend of pstore to record
dumps to block devices, in Documentation/admin-guide/pstore-blk.rst
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-7-keescook@chromium.org/
Signed-off-by: Kees Cook <keescook@chromium.org>
WeiXiong Liao [Wed, 25 Mar 2020 08:55:01 +0000 (16:55 +0800)]
pstore/zone,blk: Add ftrace frontend support
Support backend for ftrace. To enable ftrace backend, just make
ftrace_size be greater than 0 and a multiple of 4096.
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-6-keescook@chromium.org/
Co-developed-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/lkml/20200512170719.221514-1-colin.king@canonical.com
Signed-off-by: Kees Cook <keescook@chromium.org>
WeiXiong Liao [Wed, 25 Mar 2020 08:55:00 +0000 (16:55 +0800)]
pstore/zone,blk: Add console frontend support
Support backend for console. To enable console backend, just make
console_size be greater than 0 and a multiple of 4096.
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-5-keescook@chromium.org/
Signed-off-by: Kees Cook <keescook@chromium.org>
WeiXiong Liao [Wed, 25 Mar 2020 08:54:59 +0000 (16:54 +0800)]
pstore/zone,blk: Add support for pmsg frontend
Add pmsg support to pstore/blk (through pstore/zone). To enable, pmsg_size
must be greater than 0 and a multiple of 4096.
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-4-keescook@chromium.org/
Co-developed-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/lkml/20200512171932.222102-1-colin.king@canonical.com
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>