Minkyu Kang [Wed, 2 Sep 2009 00:31:36 +0000 (09:31 +0900)]
s5pc1xx: usb: remove white space
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Kyungmin Park [Tue, 1 Sep 2009 07:38:10 +0000 (16:38 +0900)]
s5pc110: Remove compiler warnings
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Byungho Min [Tue, 1 Sep 2009 07:20:56 +0000 (16:20 +0900)]
s5pc110: aquila: CP_RST is high at Phone_on rising edge
Dongsoo Kim [Tue, 1 Sep 2009 06:33:36 +0000 (15:33 +0900)]
build script CROSS_COMPILER revised
Kyungmin Park [Tue, 1 Sep 2009 04:57:12 +0000 (13:57 +0900)]
s5pc110: OneNAND Syncronous Read support
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Tue, 1 Sep 2009 03:59:11 +0000 (12:59 +0900)]
s5pc110: Rearrange wakeup routine
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Tue, 1 Sep 2009 00:40:03 +0000 (09:40 +0900)]
Merge branch 'master' of kmpark@party:/pub/git/u-boot-s5pc1xx
Minkyu Kang [Tue, 1 Sep 2009 00:54:37 +0000 (09:54 +0900)]
usb: remove white space
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Kyungmin Park [Tue, 1 Sep 2009 00:39:59 +0000 (09:39 +0900)]
s5pc110: aquila: Redirect UART & USB to CP if required
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Marek Szyprowski [Mon, 31 Aug 2009 12:08:18 +0000 (14:08 +0200)]
S5PC1XX: optimize otg registers access, up to 2.8x speedup achieved
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Kyungmin Park [Mon, 31 Aug 2009 06:11:32 +0000 (15:11 +0900)]
s5pc110: universal: Disable kernel verification
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Mon, 31 Aug 2009 01:09:36 +0000 (10:09 +0900)]
OneNAND: Read OOB with 32 bytes to use optimized memcpy32
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Sat, 29 Aug 2009 03:26:58 +0000 (12:26 +0900)]
Merge branch 'master' of git://git.denx.de/u-boot
Kyungmin Park [Sat, 29 Aug 2009 03:22:53 +0000 (12:22 +0900)]
GIT: ignore the samsung_read file
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Sat, 29 Aug 2009 03:22:30 +0000 (12:22 +0900)]
ARM: optimized memcpy32 support
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Sat, 29 Aug 2009 03:02:02 +0000 (12:02 +0900)]
s5pc110: Don't init internal ram at OneNAND IPL
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Sat, 29 Aug 2009 03:00:03 +0000 (12:00 +0900)]
OneNAND: Mask the density
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Sat, 29 Aug 2009 02:50:20 +0000 (11:50 +0900)]
OneNAND IPL Seperate CPU specific code from generic
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Sat, 29 Aug 2009 02:46:16 +0000 (11:46 +0900)]
s5pc110: Reduce the low level code
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Sat, 29 Aug 2009 02:30:46 +0000 (11:30 +0900)]
s5pc110: Reduce the mem setup code
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Sat, 29 Aug 2009 02:02:32 +0000 (11:02 +0900)]
USB: Fix modem partition write
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Sat, 29 Aug 2009 00:15:32 +0000 (09:15 +0900)]
s5pc100: smdkc100: Remove raise function at board file
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Fri, 28 Aug 2009 09:24:30 +0000 (18:24 +0900)]
s5pc110: ss: Dont' detect SS temporaily
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Fri, 28 Aug 2009 06:21:06 +0000 (15:21 +0900)]
s5pc110: SS: Detect SS correctly
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Fri, 28 Aug 2009 04:01:55 +0000 (13:01 +0900)]
s5pc110: screensplit: SS initial detection
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Fri, 28 Aug 2009 01:03:10 +0000 (10:03 +0900)]
s5pc110: universal: Add TZPC initialization
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
André Schwarz [Thu, 27 Aug 2009 12:48:35 +0000 (14:48 +0200)]
Use common code for Matrix Vision boards
Clean up existing boards (mvBC-P/MPC5200 and mvBL-M7/MPC8343) by
using common code.
Signed-off-by: André Schwarz <andre.schwarz@matrix-vision.de>
Kim Phillips [Thu, 27 Aug 2009 02:27:37 +0000 (21:27 -0500)]
mpc83xx: mpc8349itx - accommodate larger kernel sizes & unzero the bootdelay
apparently the ITX was missed last round.
Also make bootdelay consistent with other boards, so as to give on the
opportunity to fix mistakenly set bootcmd without having checked for an
bootdelay zero setting first.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Kim Phillips [Thu, 27 Aug 2009 02:25:46 +0000 (21:25 -0500)]
mpc83xx: match dtb filename references to their dts equivalents in the linux kernel
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Kyungmin Park [Wed, 26 Aug 2009 03:04:53 +0000 (12:04 +0900)]
s5pc110: universal: Remove universal specific 7color
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Wed, 26 Aug 2009 01:37:10 +0000 (10:37 +0900)]
Merge branch 'master' of kmpark@party:/pub/git/u-boot-s5pc1xx
Kyungmin Park [Wed, 26 Aug 2009 01:37:02 +0000 (10:37 +0900)]
s5pc110: Enalbe IO retention
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Wolfgang Denk [Tue, 25 Aug 2009 20:54:01 +0000 (22:54 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx
Wolfgang Denk [Tue, 25 Aug 2009 20:51:40 +0000 (22:51 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-blackfin
Feng Kan [Fri, 21 Aug 2009 17:59:42 +0000 (10:59 -0700)]
ppc4xx: Fix ECC Correction bug with SMC ordering for NDFC driver
Fix ECC Correction bug where the byte offset location were double
flipped causing correction routine to toggle the wrong byte location
in the ECC segment. The ndfc_calculate_ecc routine change the order
of getting the ECC code.
/* The NDFC uses Smart Media (SMC) bytes order */
ecc_code[0] = p[2];
ecc_code[1] = p[1];
ecc_code[2] = p[3];
But in the Correction algorithm when calculating the byte offset
location, the s1 is used as the upper part of the address. Which
again reverse the order making the final byte offset address
location incorrect.
byteoffs = (s1 << 0) & 0x80;
.
.
byteoffs |= (s0 >> 4) & 0x08;
The order is change to read it in straight and let the correction
function to revert it to SMC order.
Signed-off-by: Feng Kan <fkan@amcc.com>
Acked-by: Victor Gallardo <vgallardo@amcc.com>
Acked-by: Prodyut Hazarika <phazarika@amcc.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Wolfgang Denk [Tue, 25 Aug 2009 10:22:38 +0000 (12:22 +0200)]
include/s3c24x0.h: fix S3C24X0_SPI_CHANNEL declaration
The SPI controller on the S3C24X0 has 8 bit registers, not 32 bit.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
Byungho Min [Tue, 25 Aug 2009 01:49:18 +0000 (10:49 +0900)]
s5pc110: modem: OneDRAM IPC is changed for XMM6160
Kyungmin Park [Mon, 24 Aug 2009 23:21:57 +0000 (08:21 +0900)]
s5pc100: universal: Set default board as universal
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Byungho Min [Mon, 24 Aug 2009 09:32:58 +0000 (18:32 +0900)]
s5pc110: modem: Modem response is 0x1234 while expecting 0x21
Kyungmin Park [Sun, 23 Aug 2009 23:24:55 +0000 (08:24 +0900)]
Merge branch 'master' of git://git.denx.de/u-boot
Conflicts:
cpu/arm_cortexa8/config.mk
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Mike Frysinger [Thu, 20 Aug 2009 23:17:59 +0000 (19:17 -0400)]
Blackfin: fix typos in gpio comments
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Harald Krapfenbauer [Tue, 18 Aug 2009 08:49:57 +0000 (04:49 -0400)]
Blackfin: cm-bf527/cm-bf537: increase flash sectors
Newer revisions of these boards have slightly larger flashes, so increase
the configured number of sectors so that U-Boot works on all revisions.
Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Jean-Christophe PLAGNIOL-VILLARD [Sun, 23 Aug 2009 12:14:52 +0000 (14:14 +0200)]
sh/rsk7203: add missing include net.h
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Mike Frysinger [Sun, 23 Aug 2009 06:47:59 +0000 (02:47 -0400)]
start a linker script helper file
Start a common header file for common linker script code (such as
workarounds for older linkers) rather than doing this in the build system.
As fallout, we no longer execute the linker every time config.mk is
included by a build file (which can easily be 70+ times), but rather only
execute it once.
This also fixes a bug in the major version checking by creating a macro to
easily compare versions and keep people from making the same common
mistake (forgetting to check major and minor together).
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sat, 22 Aug 2009 23:50:22 +0000 (19:50 -0400)]
Blackfin: use common code to preprocess linker script
Now that the common code preprocesses the linker script, the Blackfin code
no longer needs to do it.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sat, 22 Aug 2009 23:48:56 +0000 (19:48 -0400)]
.gitignore: ignore generated u-boot.lds
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Albin Tonnerre [Sat, 22 Aug 2009 12:21:53 +0000 (14:21 +0200)]
include/mmc.h: Fix typo in IS_SD() macro
Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Wolfgang Denk [Sat, 22 Aug 2009 21:27:26 +0000 (23:27 +0200)]
Prepare 2009.08-rc3
Update CHANGELOG, minor Coding Style cleanup.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Kyungmin Park [Sat, 22 Aug 2009 01:59:33 +0000 (10:59 +0900)]
s5pc110: universal: Add GPIO comments
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Wolfgang Denk [Fri, 21 Aug 2009 22:24:54 +0000 (00:24 +0200)]
Merge branch 'master' of /home/wd/git/u-boot/custodians
Michal Simek [Thu, 20 Aug 2009 20:52:25 +0000 (06:52 +1000)]
qemu-mips: Fix Qemu website
Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Michal Simek <michal.simek@petalogix.com>
Acked-by: Shinya Kuribayashi <skuribay@pobox.com>
Kim Phillips [Fri, 21 Aug 2009 21:34:38 +0000 (16:34 -0500)]
mpc83xx: accommodate larger kernel sizes by default
linux mpc83xx_defconfig kernels are getting bigger, accommodate for
their growth by adjusting default load and fdt addresses.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Kim Phillips [Fri, 21 Aug 2009 21:33:15 +0000 (16:33 -0500)]
mpc83xx: mpc8377erdb - change DDR settings to those from latest bsp
when using Linus' 83xx_defconfig, the mpc8377rdb would hang at boot
at either:
NET: Registered protocol family 16
or the
io scheduler cfq registered
message. Fixing up these DDR settings appears to fix the problem.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Kim Phillips [Fri, 21 Aug 2009 21:31:20 +0000 (16:31 -0500)]
mpc83xx: tqm8349 - remove pci & flash window conflict
commit
9993e196da707a0a1cd4584f1fcef12382c1c144 "mpc83xx: convert all
remaining boards over to 83XX_GENERIC_PCI" remapped pci windows on
tqm834x to make it more consistent with the other 83xx boards. During
that time however, the author failed to realize that FLASH_BASE was
occupying the same range as what PCI1_MEM_BASE was being assigned.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Tested-by: Wolfgang Denk <wd@denx.de>
Heiko Schocher [Fri, 21 Aug 2009 21:30:30 +0000 (16:30 -0500)]
mpc83xx: add missing CSCONFIG_ODT_WR_CFG for 832x CPUs
Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Paul Gortmaker [Fri, 21 Aug 2009 21:27:05 +0000 (16:27 -0500)]
mpc83xx: mpc8349 - delete unused SYS_MID_FLASH_JUMP
This was introduced with the MPC8349EMDS board, and then copied to
a couple other boards by nature of being the reference implementation.
u-boot$git grep CONFIG_SYS_MID_FLASH_JUMP
include/configs/MPC8349EMDS.h:#define CONFIG_SYS_MID_FLASH_JUMP 0x7F000000
include/configs/sbc8349.h:#define CONFIG_SYS_MID_FLASH_JUMP 0x7F000000
include/configs/vme8349.h:#define CONFIG_SYS_MID_FLASH_JUMP 0x7F000000
u-boot$
It currently isn't used, so delete it before it spreads further.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Paul Gortmaker [Fri, 21 Aug 2009 21:21:58 +0000 (16:21 -0500)]
mpc83xx: sbc8349 - make enabling PCI more user friendly
Prior to this commit, to enable PCI, you had to go manually
edit the board config header, which isn't really user friendly.
This adds the typical PCI make targets to the toplevel Makefile
in accordance with what is being done with other boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Jean-Christophe PLAGNIOL-VILLARD [Fri, 7 Aug 2009 21:37:54 +0000 (23:37 +0200)]
eeprom_m95xxx: remove unused variable i
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Ilya Yanok [Fri, 17 Jul 2009 11:02:42 +0000 (15:02 +0400)]
jffs2: some fixes to summary support
This patch fixes some issues with JFFS2 summary support in U-Boot.
1/ Summary support made compilation configurable (as summary support
considered expiremental even in Linux).
2/ Summary code can do unaligned 16-bit and 32-bit memory accesses.
We need to get data byte by byte to exclude data aborts.
3/ Make summary scan in two passes so we can safely fall back to full
scan if we found unsupported entry in the summary.
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Prafulla Wadaskar [Mon, 10 Aug 2009 13:25:54 +0000 (18:55 +0530)]
arm: rd6281a: Fixed NAND specific warning
It is recommended to define the macro CONFIG_SYS_64BIT_VSPRINTF
for NAND specific warning removal, same is done in this patch
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Wolfgang Denk [Wed, 12 Aug 2009 22:37:16 +0000 (00:37 +0200)]
TRAB: make independent of specific libgcc helper routines
The TRAB board references local libgcc helper routines
(lib_arm/div0.o and lib_arm/_umodsi3.o) which cause build problems
when we try to use the normal, compiler provided libgcc instead.
Removing these references allows to build both with and without the
local libgcc helper routines.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Mon, 17 Aug 2009 12:00:53 +0000 (14:00 +0200)]
Fix all linker scripts for older binutils versions (pre-2.16)
Commit
f62fb99941c6 fixed handling of all rodata sections by using a
wildcard combined with calls to ld's builtin functions SORT_BY_ALIGNMENT()
and SORT_BY_NAME(). Unfortunately these functions were only
introduced with biunutils version 2.16, so the modification broke
building with all tool chains using older binutils.
This patch makes it work again. This is done by omitting the use of
these functions for such old tool chains. This will result in
slightly larger target binaries, as the rodata sections are no longer
in optimal order alignment-wise which reauls in unused gaps, but the
effect was found to be insignificant - especially compared to the fact
that you cannot build U-Boot at all in the current state.
As ld seems to have no support for conditionals we run the linker
script through the C preprocessor which can be easily used to remove
the unwanted function calls.
Note that the C preprocessor must be run with the "-ansi" (or a
"-std=") option to make sure all the system-specific predefined
macros outside the reserved namespace are suppressed. Otherise, cpp
might for example substitute "powerpc" to "1", thus corrupting for
example "OUTPUT_ARCH(powerpc)" etc.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Mike Frysinger <vapier@gentoo.org>
Wolfgang Denk [Mon, 17 Aug 2009 11:17:29 +0000 (13:17 +0200)]
ARM: compiler options cleanup - improve tool chain support
For some time there have been repeated reports about build problems
with some ARM (cross) tool chains. Especially issues about
(in)compatibility with the tool chain provided runtime support
library libgcc.a caused to add and support a private implementation
of such runtime support code in U-Boot. A closer look at the code
indicated that some of these issues are actually home-made. This
patch attempts to clean up some of the most obvious problems and make
building of U-Boot with different tool chains easier:
- Even though all ARM systems basicy used the same compiler options
to select a specific ABI from the tool chain, the code for this was
distributed over all cpu/*/config.mk files. We move this one level
up into lib_arm/config.mk instead.
- So far, we only checked if "-mapcs-32" was supported by the tool
chain; if yes, this was used, if not, "-mabi=apcs-gnu" was
selected, no matter if the tool chain actually understood this
option. There was no support for EABI conformant tool chains.
This patch implements the following logic:
1) If the tool chain supports
"-mabi=aapcs-linux -mno-thumb-interwork"
we use these options (EABI conformant tool chain).
2) Otherwise, we check first if
"-mapcs-32"
is supported, and then check for
"-mabi=apcs-gnu"
If one test succeeds, we use the first found option.
3) In case 2), we also test if "-mno-thumb-interwork", and use
this if the test succeeds. [For "-mabi=aapcs-linux" we set
"-mno-thumb-interwork" mandatorily.]
This way we use a similar logic for the compile options as the
Linux kernel does.
- Some EABI conformant tool chains cause external references to
utility functions like raise(); such functions are provided in the
new file lib_arm/eabi_compat.c
Note that lib_arm/config.mk gets parsed several times, so we must
make sure to add eabi_compat.o only once to the linker list.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Dirk Behme <dirk.behme@googlemail.com>
Cc: Magnus Lilja <lilja.magnus@gmail.com>
Cc: Tom Rix <Tom.Rix@windriver.com>
Cc: Prafulla Wadaskar <prafulla@marvell.com>
Acked-by: Sergey Kubushyn <ksi@koi8.net>
Tested-by: Magnus Lilja <lilja.magnus@gmail.com>
Tested-by: Andrzej Wolski <awolski@poczta.fm>
Tested-by: Gaye Abdoulaye Walsimou <walsimou@walsimou.com>
Tested-by: Tom Rix <Tom.Rix@windriver.com>
Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Wolfgang Denk [Fri, 21 Aug 2009 21:04:03 +0000 (23:04 +0200)]
Merge branch 'master' of /home/wd/git/u-boot/custodians
Wolfgang Denk [Fri, 21 Aug 2009 21:03:58 +0000 (23:03 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-net
Wolfgang Denk [Fri, 21 Aug 2009 20:56:01 +0000 (22:56 +0200)]
Merge branch 'master' of /home/wd/git/u-boot/custodians
Mingkai Hu [Thu, 30 Jul 2009 09:56:51 +0000 (17:56 +0800)]
NAND boot: fix nand_load overlap issue
The code copy data from NAND flash block by block, so when
the data length isn't a whole-number multiple of the block
size, it will overlap the rest space.
Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Giulio Benetti [Fri, 31 Jul 2009 22:30:34 +0000 (17:30 -0500)]
add WATCHDOG_RESET() on nand write and read
Signed-off-by: giulio.benetti@micronovasrl.com
Acked-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Peter Tyser [Wed, 4 Feb 2009 21:14:05 +0000 (15:14 -0600)]
tsec: Wait for auto-negotiation to complete without link
Previously, waiting for auto-negotiation would only occur if a valid
link had been detected. Problems arose when attempting to use a
tsec immediately after bootup but before link was achieved, eg:
=> dhcp
Auto-neg error, defaulting to 10BT/HD
eTSEC1: No link.
Auto-neg error, defaulting to 10BT/HD
eTSEC2: No link.
=>
With this patch applied the same operation as above resulted in:
=> dhcp
Waiting for PHY auto negotiation to complete. done
Enet starting in 1000BT/FD
Speed: 1000, full duplex
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Simon Kagstrom [Thu, 20 Aug 2009 08:14:11 +0000 (10:14 +0200)]
arm: kirkwood: See to it that sent data is 8-byte aligned
U-boot might use non-8-byte-aligned addresses for sending data, which
the kwgbe_send doesn't accept (bootp does this for me). This patch
copies the data to be sent to a malloced temporary buffer if it is
non-aligned.
Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Simon Kagstrom [Thu, 20 Aug 2009 08:13:06 +0000 (10:13 +0200)]
Wait for the link to come up on kirkwood network init
This patch makes the device wait for up to 5 seconds for the link to
come up, similar to what many of the other network drivers do. This
avoids confusing situations where, e.g., a tftp fails when initiated
early after U-boot has started (before the link has come up).
Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Simon Kagstrom [Thu, 20 Aug 2009 08:12:28 +0000 (10:12 +0200)]
arm:kirkwood Define kirkwood phy address magic number
Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Timur Tabi [Mon, 17 Aug 2009 20:55:38 +0000 (15:55 -0500)]
e1000: fix PCI memory addressing
The Intel E1000 driver was making assumptions about the relationship between
some virtual, physical, and PCI addresses.
Also fix some bad usage of the DEBUGOUT macro
Signed-off-by: Timur Tabi <timur@freescale.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
daeinki [Fri, 21 Aug 2009 13:05:29 +0000 (22:05 +0900)]
s5pc110: fb: Added image drawing.
Signed-off-by: daeinki <inki.dae@samsung.com>
daeinki [Fri, 21 Aug 2009 12:16:05 +0000 (21:16 +0900)]
s5pc110: lcd: comment fix.
Signed-off-by: daeinki <inki.dae@samsung.com>
daeinki [Fri, 21 Aug 2009 12:13:53 +0000 (21:13 +0900)]
Merge branch 'master' of daeinki@10.89.8.158:/pub/git/u-boot-s5pc1xx
daeinki [Fri, 21 Aug 2009 12:06:08 +0000 (21:06 +0900)]
s5pc110: fb: added FB and LCD Panel driver for DD Aquila.
Signed-off-by: daeinki <inki.dae@samsung.com>
Kyungmin Park [Fri, 21 Aug 2009 05:30:20 +0000 (14:30 +0900)]
s5pc110: Fix wrong machine id
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Fri, 21 Aug 2009 04:36:29 +0000 (13:36 +0900)]
s5pc110: Detect Aquila board and arrange board detection
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Fri, 21 Aug 2009 04:03:33 +0000 (13:03 +0900)]
s5pc110: Pass correct HW revision number
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Fri, 21 Aug 2009 00:06:19 +0000 (09:06 +0900)]
s5pc110: universal: Use samsung-onenand drivers
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Fri, 21 Aug 2009 00:01:23 +0000 (09:01 +0900)]
s5pc100: smdkc100: Use rootfs name for UBI rootfs
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Minkyu Kang [Thu, 20 Aug 2009 06:49:20 +0000 (15:49 +0900)]
smdkc100: set boot delay 3
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Kyungmin Park [Thu, 20 Aug 2009 05:23:49 +0000 (14:23 +0900)]
Merge branch 'master' of git://git.denx.de/u-boot
Conflicts:
cpu/arm_cortexa8/config.mk
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Byungho Min [Thu, 20 Aug 2009 04:47:58 +0000 (13:47 +0900)]
s5pc110: modem: moving modem booting sourcecode to board directory
Byungho Min [Wed, 19 Aug 2009 10:07:22 +0000 (19:07 +0900)]
s5pc100: modem: infineon PSI loading
Ilya Yanok [Wed, 12 Aug 2009 12:42:48 +0000 (16:42 +0400)]
jffs2: clean the cache in case of malloc fails in build_lists
We should call jffs2_clean_cache() if we return from jffs2_build_lists()
with an error to prevent usage of incomplete lists. Also we should
free() a local buffer to prevent memory leaks.
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Heiko Schocher [Wed, 12 Aug 2009 08:17:03 +0000 (10:17 +0200)]
ppc: trigger WDT before starting Linux
Signed-off-by: Heiko Schocher <hs@denx.de>
Wolfgang Denk [Tue, 18 Aug 2009 11:57:04 +0000 (13:57 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx
Wolfgang Denk [Tue, 18 Aug 2009 11:53:54 +0000 (13:53 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx
Albin Tonnerre [Wed, 22 Jul 2009 16:30:03 +0000 (18:30 +0200)]
Update the mtd driver name in bootargs for at91-based boards
The name of the atmel nand driver in the kernel changed from at91_nand
to atmel_nand back in June 2008, but the at91-based boards config files
still refer to at91_nand. This patch updates them with the new name
Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Ben Goska [Fri, 14 Aug 2009 17:03:36 +0000 (10:03 -0700)]
omap3: Fixed a problem with hwecc
In commit
187af954cf7958c24efcf0fd62289bbdb4f1f24e there
was a typo that offset all the ecc registers by 4 bytes, fixed that.
Signed-off-by: Ben Goska <goskab@onid.oregonstate.edu>
Acked-by: Dirk Behme <dirk.behme@googlemail.com>
Stefan Roese [Mon, 17 Aug 2009 14:57:53 +0000 (16:57 +0200)]
ppc4xx: Fix "chip_config" command for AMCC Arches
This patch fixes the "chip_config" command for I2C bootstrap EEPROM
configuration. First it changes the I2C bootstrap EEPROM address to
0x54 as this is used on Arches (instead of 0x52 on Canyonlands/
Glacier). Additionally, the NAND bootstrap settings are removed
for Arches since Arches doesn't support NAND-booting.
Signed-off-by: Stefan Roese <sr@denx.de>
Wolfgang Denk [Sun, 16 Aug 2009 21:40:13 +0000 (23:40 +0200)]
Monahans: avoid floating point calculations
Current code for the Monahans CPU defined OSCR_CLK_FREQ as 3.250 (MHz)
which caused floating point operations to be used. This resulted in
unresolved references to some FP related libgcc functions when using
U-Boot's private libgcc functions.
Change the code to use fixed point math only.
Signed-off-by: Wolfgang Denk <wd@denx.de>
daeinki [Mon, 17 Aug 2009 08:48:28 +0000 (17:48 +0900)]
s5pc110: fb: code clean.
Signed-off-by: daeinki <inki.dae@samsung.com>
Kumar Gala [Fri, 14 Aug 2009 21:43:22 +0000 (16:43 -0500)]
85xx: Fix addrmap to include memory
When we init the addrmap based on the TLB we will not end up getting
the TLB that covers memory if we are using SPD. The reason is we
haven't relocated at the point that we setup the memory TLB and thus it
will not get setup in the addrmap.
Instead we can just walk over the TLB array after we've relocated and
see all the TLBs that have been set and use that information to populate
the initial addrmap. By doing this we insure that we get the TLB
entries that cover memory.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
John Schmoller [Wed, 12 Aug 2009 15:55:47 +0000 (10:55 -0500)]
flash: Fix CFI buffer size bug
Fix bug introduced by
9c048b523413ae5f3ff34e00cf57569c3368ab51.
The cfi_flash.c driver cast the flash buffer size to a uchar in
flash_write_cfibuffer(). On some flash parts, (tested on Numonyx
part PC32F512M29EWH), the buffer size is 1KB. Remove the cast to
uchar to enable buffer sizes to be larger.
Signed-off-by: John Schmoller <jschmoller@xes-inc.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Mike Frysinger [Thu, 13 Aug 2009 04:32:14 +0000 (00:32 -0400)]
trab: rename spi_init()
The local board-specific spi_init() function conflicts with the common SPI
layer, so rename it to something board-specific.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Giuseppe CONDORELLI [Wed, 29 Jul 2009 10:05:20 +0000 (06:05 -0400)]
zlib: add watchdog reset call
This patch adds watchdog reset call to allow its invokation during decompression
phase. This control was present on old zlib version and here it is
backported for those relevant routines. This patch is sent as a zlib separate
one beacuse it was not tested due to specific board lack.
zlib patches will be unified just in one when this will be validated through
tests.
Signed-off-by: Giuseppe Condorelli <giuseppe.condorelli@st.com>
Giuseppe CONDORELLI [Wed, 29 Jul 2009 12:05:08 +0000 (08:05 -0400)]
zlib: updated to v.1.2.3
This patch updates zlib to the latest stable version.
Only relevant zlib parts were ported to u-boot tree, as already did for the
current zlib (0.95). New zlib guarantees a faster inflate performances
other then others improvements as explained at www.zlib.net.
It also includes Alessandro Rubini's patches to allow 0 as destination pointer
and to call watchdog reset if required by architecture.
Signed-off-by: Giuseppe Condorelli <giuseppe.condorelli@st.com>
Reviewed-by: Angelo Castello <angelo.castello@st.com>
Reviewed-by: Alessandro Rubini <rubini-list@gnudd.com>