Robert Schlabbach [Thu, 6 Jan 2022 22:52:49 +0000 (23:52 +0100)]
media: si2157: add support for DVB-C Annex C
DVB-C Annex C is mostly DVB-C Annex A with only minor differences, so
simply add it to the DVB-C Annex A switch case, so that tuning attempts
no longer result in -EINVAL.
Link: https://lore.kernel.org/linux-media/trinity-fd7dd9e4-c319-4761-89b6-555fa7b23776-1641509569422@3c-app-gmx-bap68
Signed-off-by: Robert Schlabbach <robert_s@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Robert Schlabbach [Thu, 6 Jan 2022 22:51:39 +0000 (23:51 +0100)]
media: si2157: fix bandwidth stored in dev
Make digital tuning store the bandwidth in Hz in the private dev struct,
rather than the hardware-specific bandwidth property code, so that the
get_bandwidth() function returns the bandwidth in Hz, just as it already
does when using analog tuning.
Link: https://lore.kernel.org/linux-media/trinity-931c0e68-88af-46cc-91a1-986754798a4f-1641509499366@3c-app-gmx-bap68
Reported-by: Robert Schlabbach <robert_s@gmx.net>
Signed-off-by: Robert Schlabbach <robert_s@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Robert Schlabbach [Thu, 6 Jan 2022 22:49:47 +0000 (23:49 +0100)]
media: si2157: fix 6MHz & 6.1MHz bandwidth setting
Commit
98c65a3dac95 ("media: si2157: add support for 1.7MHz and 6.1
MHz") introduced two bugs: The 6.1MHz setting was always used for any
bandwidth less than 7MHz due to missing "else" keywords, and then the
setting was not specified as decimal 10, but as hexadecimal 0x10, which
makes the tuner refuse the tune command. In sum, it is not possible to
tune to any channels of less than 7MHz bandwidth anymore.
Add the missing "else" keywords and convert all bandwidth settings to
decimal to avoid any future decimal vs. hexadecimal confusion.
Remove the use of the undefined bandwidth setting 0x0f for bandwidths
greater than 8MHz, which is also refused by the tune command, in favour
of using the default bandwidth setting 8 for any bandwidths greater than
7MHz.
Link: https://lore.kernel.org/linux-media/trinity-d0015ea1-1da5-4c7d-a75b-781fb26dc339-1641509387112@3c-app-gmx-bap68
Fixes:
98c65a3dac95 ("media: si2157: add support for 1.7MHz and 6.1 MHz")
Reported-by: Robert Schlabbach <robert_s@gmx.net>
Signed-off-by: Robert Schlabbach <robert_s@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Nathan Chancellor [Mon, 27 Dec 2021 16:42:43 +0000 (17:42 +0100)]
media: atomisp: Do not define input_system_cfg2400_t twice
When CONFIG_VIDEO_ATOMISP_ISP2401 is disabled, clang warns:
./drivers/staging/media/atomisp//pci/isp2400_input_system_local.h:32:40:
error: redefinition of typedef 'input_system_cfg2400_t' is a C11 feature
[-Werror,-Wtypedef-redefinition]
typedef struct input_system_cfg2400_s input_system_cfg2400_t;
^
./drivers/staging/media/atomisp//pci/input_system_local.h:22:40: note:
previous definition is here
typedef struct input_system_cfg2400_s input_system_cfg2400_t;
^
1 error generated.
input_system_cfg2400_t's typedef was copied from
isp2400_input_system_local.h to input_system_local.h, rather than moved.
Remove the one in isp2400_input_system_local.h so that there is no more
warning, which can break the build under -Werror.
Link: https://github.com/ClangBuiltLinux/linux/issues/1557
Link: https://lore.kernel.org/linux-media/20211227164243.2329724-1-nathan@kernel.org
Fixes:
4005ecee616a ("media: atomisp: shift some structs from input_system_local")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Fri, 3 Dec 2021 10:28:57 +0000 (11:28 +0100)]
media: ipu3-cio2: Add support for instantiating i2c-clients for VCMs
Some sensors come with a variable-focus lens where the lens focus is
controller by a VCM (Voice Coil Motor). If there is a VCM for the
lens-focus, and if so which one, is described on the vcm_type field
of the ACPI SSDB table.
These VCMs are a second I2C device listed as an extra I2cSerialBusV2
resource in the same ACPI device as the sensor. The i2c-core-acpi.c
code only instantiates an i2c-client for the first I2cSerialBusV2
resource.
Add support for instantiating an i2c-client for the VCM with
the type of the i2c-client set based on the SSDB vcm_type field.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Fri, 3 Dec 2021 10:28:56 +0000 (11:28 +0100)]
media: ipu3-cio2: Call cio2_bridge_init() before anything else
Since cio2_bridge_init() may now return -EPROBE_DEFER it is best to
call it before anything else.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Fri, 3 Dec 2021 10:28:55 +0000 (11:28 +0100)]
media: ipu3-cio2: Defer probing until the PMIC is fully setup
On devices where things are not fully describe in devicetree (1)
and where the code thus falls back to calling cio2_bridge_init(),
the i2c-clients for any VCMs also need to be instantiated manually.
The VCM can be probed by its driver as soon as the code instantiates
the i2c-client and this probing must not happen before the PMIC is
fully setup.
Make cio2_bridge_init() return -EPROBE_DEFER when the PMIC is not
fully-setup, deferring the probe of the ipu3-cio2 driver.
This is a preparation patch for adding VCM enumeration support to
the ipu3-cio2-bridge code.
1) Through embedding of devicetree info in the ACPI tables
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Jernej Skrabec [Mon, 29 Nov 2021 18:26:32 +0000 (19:26 +0100)]
media: hantro: Add support for Allwinner H6
Allwinner H6 has a Hantro G2 core used for VP9 decoding. It's not clear
at this time if HEVC is also supported or not.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Jernej Skrabec [Mon, 29 Nov 2021 18:26:31 +0000 (19:26 +0100)]
media: dt-bindings: allwinner: document H6 Hantro G2 binding
Allwinner H6 contains older Hantro G2 core, primarly used for VP9 video
decoding. It's unclear for now if HEVC is also supported.
Describe its binding.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Jernej Skrabec [Mon, 29 Nov 2021 18:26:30 +0000 (19:26 +0100)]
media: hantro: Convert imx8m_vpu_g2_irq to helper
It turns out that imx8m_vpu_g2_irq() doesn't depend on any platform
specifics and can be used with other G2 platform drivers too.
Move it to common code.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Jernej Skrabec [Mon, 29 Nov 2021 18:26:29 +0000 (19:26 +0100)]
media: hantro: move postproc enablement for old cores
Older G2 cores, like that in Allwinner H6, seem to have issue with
latching postproc register values if this is first thing done in job.
Moving that to the end solves the issue.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Jernej Skrabec [Mon, 29 Nov 2021 18:26:28 +0000 (19:26 +0100)]
media: hantro: vp9: add support for legacy register set
Some older G2 cores uses slightly different register set for HEVC and
VP9. Since vast majority of registers and logic is the same, it doesn't
make sense to introduce another drivers.
Add legacy_regs quirk and implement only VP9 changes for now. HEVC
changes will be introduced later, if needed.
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Jernej Skrabec [Mon, 29 Nov 2021 18:26:27 +0000 (19:26 +0100)]
media: hantro: vp9: use double buffering if needed
Some G2 variants need double buffering to be enabled in order to work
correctly, like that found in Allwinner H6 SoC.
Add platform quirk for that.
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Jernej Skrabec [Mon, 29 Nov 2021 18:26:26 +0000 (19:26 +0100)]
media: hantro: add support for reset lines
Some SoCs like Allwinner H6 use reset lines for resetting Hantro G2. Add
support for them.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Jernej Skrabec [Mon, 29 Nov 2021 18:26:25 +0000 (19:26 +0100)]
media: hantro: Fix probe func error path
If clocks for some reason couldn't be enabled, probe function returns
immediately, without disabling PM. This obviously leaves PM ref counters
unbalanced.
Fix that by jumping to appropriate error path, so effects of PM functions
are reversed.
Fixes:
775fec69008d ("media: add Rockchip VPU JPEG encoder driver")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Martin Kepplinger [Tue, 9 Nov 2021 13:10:13 +0000 (14:10 +0100)]
media: i2c: hi846: use pm_runtime_force_suspend/resume for system suspend
In cases like this when controlling regulators and clocks the suspend()
and resume() functions are meant to be called balanced toggling the behaviour.
It's wrong to use the same suspend function for runtime and system suspend
in this case and leads to errors like
[ 77.718890] Failed to disable vddd: -EIO
Use pm_runtime_force_* helpers in order to support system suspend properly
when runtime pm is already implemented and fix this.
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Martin Kepplinger [Tue, 9 Nov 2021 13:10:12 +0000 (14:10 +0100)]
media: i2c: hi846: check return value of regulator_bulk_disable()
regulator_bulk_disable can fail and thus suspend() can. Handle that error
gracefully.
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Bingbu Cao [Wed, 15 Dec 2021 11:09:03 +0000 (12:09 +0100)]
media: hi556: Support device probe in non-zero ACPI D state
Tell ACPI device PM code that the driver supports the device being in
non-zero ACPI D state when the driver's probe function is entered.
Also do identification on the first access of the device, whether in probe
or when starting streaming.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Kao, Arec <arec.kao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Bingbu Cao [Wed, 15 Dec 2021 11:09:02 +0000 (12:09 +0100)]
media: ov5675: Support device probe in non-zero ACPI D state
Tell ACPI device PM code that the driver supports the device being in
non-zero ACPI D state when the driver's probe function is entered.
Also do identification on the first access of the device, whether in probe
or when starting streaming.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Bingbu Cao [Wed, 15 Dec 2021 11:09:01 +0000 (12:09 +0100)]
media: imx208: Support device probe in non-zero ACPI D state
Tell ACPI device PM code that the driver supports the device being in
non-zero ACPI D state when the driver's probe function is entered.
Also do identification on the first access of the device, whether in probe
or when starting streaming.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Bingbu Cao [Wed, 15 Dec 2021 11:09:00 +0000 (12:09 +0100)]
media: ov2740: support device probe in non-zero ACPI D state
Tell ACPI device PM code that the driver supports the device being in
non-zero ACPI D state when the driver's probe function is entered.
Also do identification on the first access of the device, whether in probe
or when starting streaming.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sakari Ailus [Wed, 15 Dec 2021 11:08:59 +0000 (12:08 +0100)]
media: ov5670: Support device probe in non-zero ACPI D state
Tell ACPI device PM code that the driver supports the device being in
non-zero ACPI D state when the driver's probe function is entered.
Also do identification on the first access of the device, whether in probe
or when starting streaming.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Bingbu Cao [Wed, 15 Dec 2021 11:08:58 +0000 (12:08 +0100)]
media: ov8856: support device probe in non-zero ACPI D state
Tell ACPI device PM code that the driver supports the device being in
non-zero ACPI D state when the driver's probe function is entered.
Also do identification on the first access of the device, whether in probe
or when starting streaming.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sakari Ailus [Wed, 15 Dec 2021 08:38:48 +0000 (09:38 +0100)]
media: ov8865: Disable only enabled regulators on error path
If powering on the sensor failed, the entire power-off sequence was run
independently of how far the power-on sequence proceeded before the error.
This lead to disabling regulators and/or clock that was not enabled.
Fix this by disabling only clocks and regulators that were enabled
previously.
Fixes:
11c0d8fdccc5 ("media: i2c: Add support for the OV8865 image sensor")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Jean-Michel Hautbois [Tue, 5 Oct 2021 20:20:19 +0000 (22:20 +0200)]
media: staging: ipu3-imgu: add the AWB memory layout
While parsing the RAW AWB metadata, the AWB layout was missing to fully
understand which byte corresponds to which feature. Make the field names
and usage explicit, as it is used by the userspace applications.
[Sakari Ailus: Changed wording of sat_ratio field as per review comments,
fixed a whitespace issue.]
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sakari Ailus [Tue, 14 Dec 2021 16:13:31 +0000 (17:13 +0100)]
media: Update Intel-submitted camera sensor driver contacts
Hyungwoo's e-mail no longer works so I presume he's left the company. Drop
Hyungwoo as maintainer on ov5670 driver and remove his e-mail from other
sensor drivers.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Thu, 16 Dec 2021 19:54:02 +0000 (20:54 +0100)]
Merge tag 'platform-drivers-x86-int3472-1' of git://git./linux/kernel/git/pdx86/platform-drivers-x86 into media_tree
Signed tag for the immutable platform-drivers-x86-int3472 branch
This branch contains 5.16-rc1 + the pending ACPI/i2c, tps68570 platform_data
and INT3472 driver patches.
* tag 'platform-drivers-x86-int3472-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: int3472: Deal with probe ordering issues
platform/x86: int3472: Pass tps68470_regulator_platform_data to the tps68470-regulator MFD-cell
platform/x86: int3472: Pass tps68470_clk_platform_data to the tps68470-regulator MFD-cell
platform/x86: int3472: Add get_sensor_adev_and_name() helper
platform/x86: int3472: Split into 2 drivers
platform_data: Add linux/platform_data/tps68470.h file
i2c: acpi: Add i2c_acpi_new_device_by_fwnode() function
i2c: acpi: Use acpi_dev_ready_for_enumeration() helper
ACPI: delay enumeration of devices with a _DEP pointing to an INT3472 device
Mauro Carvalho Chehab [Fri, 10 Dec 2021 12:52:42 +0000 (13:52 +0100)]
media: si2157: add ATV support for si2158
This device also supports ATV, as it has the same API for
setting analog TV tuning parameters.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Fri, 10 Dec 2021 12:37:54 +0000 (13:37 +0100)]
media: si2157: add support for 1.7MHz and 6.1 MHz
Some tuners allow setting the bandwidth filter to 1.7MHz and
6.1 MHz. Add support for it upstream, as the narrower is the
bandwidth filter, the better.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Fri, 10 Dec 2021 12:16:32 +0000 (13:16 +0100)]
media: si2157: add support for ISDB-T and DTMB
Those two delivery systems are supported by some of the si2146
tuners, but the current code is missing the setup for those.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Fri, 10 Dec 2021 07:55:20 +0000 (08:55 +0100)]
media: si2157: get rid of chiptype data
The driver should be capable of autodetecting its type, so no
need to pass it via device driver's data.
While here, improve documentation of some of the part_id
specific code.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Thu, 9 Dec 2021 10:56:01 +0000 (11:56 +0100)]
media: si2157: use a different namespace for firmware
Each chip at the si21xx TER family seems to have a different firmware,
with seems to actually be a patch against the ROM code.
Rework the code in order to use different firmware files depending
on the chip ID and rom ID.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Wed, 8 Dec 2021 09:46:59 +0000 (10:46 +0100)]
media: si2157: rework the firmware load logic
Loading a firmware file should not be mandatory, as devices
could work with an eeprom firmware, if available.
Yet, using the eeprom firmware could lead into unpredictable
results, so the best is to warn about that.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Robert Schlabbach [Wed, 1 Dec 2021 21:10:58 +0000 (22:10 +0100)]
media: si2157: Add optional firmware download
The Si2157 (A30) is functional with the ROM firmware 3.0.5, but can also
be patched at runtime, e.g. to firmware 3.1.3. However, although a
firmware filename for its firmware patch exists, that has only been used
for the Si2177 (A30) so far (which indeed takes the binary identical
firmware patch).
Add support for downloading firmware patches into the Si2157 (A30), but
make it optional, so that initialization can succeed with and without a
firmware patch being available. Keep the use of request_firmware() for
this purpose rather than firmware_request_nowarn(), so that the warning
in the log makes users aware that it is possible to provide a firmware
for this tuner.
The firmware patch is probably also optional for other (if not all)
tuners supported by the driver, but since I do not have the others
available to test, they are kept mandatory for now to avoid regressions.
Signed-off-by: Robert Schlabbach <robert_s@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Wed, 8 Dec 2021 09:23:45 +0000 (10:23 +0100)]
media: si2157: move firmware load to a separate function
Split the firmware load code from si2157_init, in order to
help to add further changes at the way firmware is handled on
this device.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
gushengxian [Wed, 26 May 2021 07:55:27 +0000 (09:55 +0200)]
media: b2c2-flexcop-usb: fix some whitespace coding style
On some places, there's a missing whitespace.
Link: https://lore.kernel.org/linux-media/20210526075527.302903-1-13145886936@163.com
Cc: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org, gushengxian <gushengxian@yulong.com>
Signed-off-by: gushengxian <gushengxian@yulong.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Jason Wang [Sun, 12 Dec 2021 07:09:18 +0000 (08:09 +0100)]
media: ivtv: no need to initialise statics to 0
Static variables do not need to be initialised to 0, because compiler
will initialise all uninitialised statics to 0. Thus, remove the
unneeded initializations.
Link: https://lore.kernel.org/linux-media/20211212070918.289617-1-wangborong@cdjrlc.com
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Andy Shevchenko [Fri, 10 Dec 2021 12:02:01 +0000 (13:02 +0100)]
media: dmxdev: drop unneeded <linux/kernel.h> inclusion from other headers
There is no evidence we need kernel.h inclusion in certain headers.
Drop unneeded <linux/kernel.h> inclusion from other headers.
Link: https://lore.kernel.org/linux-media/20211210120201.35635-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Minghao Chi [Fri, 10 Dec 2021 02:47:21 +0000 (03:47 +0100)]
media: vidtv: remove unneeded variable make code cleaner
return value form directly instead of
taking this in another redundant variable.
Link: https://lore.kernel.org/linux-media/20211210024721.425145-1-chi.minghao@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cm>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
chiminghao [Thu, 9 Dec 2021 01:50:09 +0000 (02:50 +0100)]
media: drivers:usb:remove unneeded variable
return value form directly instead of
taking this in another redundant variable.
Link: https://lore.kernel.org/linux-media/20211209015009.409428-1-chi.minghao@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cm>
Signed-off-by: chiminghao <chi.minghao@zte.com.cn>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Niklas Söderlund [Wed, 8 Dec 2021 12:17:56 +0000 (13:17 +0100)]
media: i2c: max9286: Use dev_err_probe() helper
Use the dev_err_probe() helper, instead of open-coding the same
operation. While at it retrieve the error once and use it from
'ret' instead of retrieving it twice.
Link: https://lore.kernel.org/linux-media/20211208121756.3051565-1-niklas.soderlund+renesas@ragnatech.se
Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Niklas S\xF6derlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Dan Carpenter [Wed, 8 Dec 2021 07:35:44 +0000 (08:35 +0100)]
media: c8sectpfe: fix double free in configure_channels()
The configure_channels() function has a double free because
configure_memdma_and_inputblock() calls free_input_block() and then
it's called again in the error handling code.
Link: https://lore.kernel.org/linux-media/20211208073544.GA22020@kili
Fixes:
c5f5d0f99794 ("[media] c8sectpfe: STiH407/10 Linux DVB demux support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Jiasheng Jiang [Mon, 6 Dec 2021 02:22:01 +0000 (03:22 +0100)]
media: coda/imx-vdoa: Handle dma_set_coherent_mask error codes
The return value of dma_set_coherent_mask() is not always 0.
To catch the exception in case that dma is not support the mask.
Link: https://lore.kernel.org/linux-media/20211206022201.1639460-1-jiasheng@iscas.ac.cn
Fixes:
b0444f18e0b1 ("[media] coda: add i.MX6 VDOA driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Colin Ian King [Sun, 5 Dec 2021 00:22:42 +0000 (01:22 +0100)]
media: davinci: remove redundant assignment to pointer common
Pointer common is being assigned a value in a for-loop and the pointer
is never read afterwards. The assignment is redundant and can be removed.
Link: https://lore.kernel.org/linux-media/20211205002242.202769-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Colin Ian King [Sun, 5 Dec 2021 00:17:17 +0000 (01:17 +0100)]
media: saa7146: remove redundant assignments of i to zero
The variable i is assigned the value 0 and each time the value is
never read after it has been assigned. The assignments are redundant
and can be removed.
Link: https://lore.kernel.org/linux-media/20211205001717.178416-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Ricardo Ribalda [Tue, 7 Dec 2021 00:38:37 +0000 (01:38 +0100)]
media: Revert "media: uvcvideo: Set unique vdev name based in type"
A lot of userspace depends on a descriptive name for vdev. Without this
patch, users have a hard time figuring out which camera shall they use
for their video conferencing.
This reverts commit
e3f60e7e1a2b451f538f9926763432249bcf39c4.
Link: https://lore.kernel.org/linux-media/20211207003840.1212374-2-ribalda@chromium.org
Cc: <stable@vger.kernel.org>
Fixes:
e3f60e7e1a2b ("media: uvcvideo: Set unique vdev name based in type")
Reported-by: Nicolas Dufresne <nicolas@ndufresne.ca>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Tue, 14 Dec 2021 13:52:28 +0000 (14:52 +0100)]
media: saa7146: fix error logic at saa7146_vv_init()
As the first thing this function does is to call
v4l2_device_register(), it should call v4l2_device_unregister()
if an error occurs, the same way as done at saa7146_vv_release().
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Zhou Qingyang [Fri, 3 Dec 2021 15:40:30 +0000 (16:40 +0100)]
media: saa7146: hexium_gemini: Fix a NULL pointer dereference in hexium_attach()
In hexium_attach(dev, info), saa7146_vv_init() is called to allocate
a new memory for dev->vv_data. saa7146_vv_release() will be called on
failure of saa7146_register_device(). There is a dereference of
dev->vv_data in saa7146_vv_release(), which could lead to a NULL
pointer dereference on failure of saa7146_vv_init().
Fix this bug by adding a check of saa7146_vv_init().
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_VIDEO_HEXIUM_GEMINI=m show no new warnings,
and our static analyzer no longer warns about this code.
Link: https://lore.kernel.org/linux-media/20211203154030.111210-1-zhou1615@umn.edu
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Christophe JAILLET [Wed, 1 Dec 2021 22:19:40 +0000 (23:19 +0100)]
media: mc: mc-entity.c: Use bitmap_zalloc() when applicable
'ent_enum->bmap' is a bitmap. So use 'bitmap_zalloc()' to simplify
code, improve the semantic and avoid some open-coded arithmetic in
allocator arguments.
Also change the corresponding 'kfree()' into 'bitmap_free()' to keep
consistency.
While at it, remove a useless 'bitmap_zero()'.
Link: https://lore.kernel.org/linux-media/b11f646dda189f490c06bf671f64a2cc0af4d45c.1638397089.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Rikard Falkeborn [Sat, 27 Nov 2021 09:49:44 +0000 (10:49 +0100)]
media: staging: max96712: Constify static v4l2_subdev_ops
The only usage of max96712_subdev_ops is to pass its address to
v4l2_i2c_subdev_init() which takes a pointer to const struct
v4l2_subdev_ops as argument. Make it const to allow the compiler to put
it in read-only memory.
Link: https://lore.kernel.org/linux-media/20211127094945.27985-1-rikard.falkeborn@gmail.com
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Niklas S\xF6derlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Wang Hai [Tue, 26 Oct 2021 11:23:48 +0000 (13:23 +0200)]
media: msi001: fix possible null-ptr-deref in msi001_probe()
I got a null-ptr-deref report:
BUG: kernel NULL pointer dereference, address:
0000000000000060
...
RIP: 0010:v4l2_ctrl_auto_cluster+0x57/0x270
...
Call Trace:
msi001_probe+0x13b/0x24b [msi001]
spi_probe+0xeb/0x130
...
do_syscall_64+0x35/0xb0
In msi001_probe(), if the creation of control for bandwidth_auto
fails, there will be a null-ptr-deref issue when it is used in
v4l2_ctrl_auto_cluster().
Check dev->hdl.error before v4l2_ctrl_auto_cluster() to fix this bug.
Link: https://lore.kernel.org/linux-media/20211026112348.2878040-1-wanghai38@huawei.com
Fixes:
93203dd6c7c4 ("[media] msi001: Mirics MSi001 silicon tuner driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mikhail Rudenko [Sun, 10 Oct 2021 17:54:57 +0000 (19:54 +0200)]
media: rockchip: rkisp1: use device name for debugfs subdir name
While testing Rockchip RK3399 with both ISPs enabled, a dmesg error
was observed:
```
[ 15.559141] debugfs: Directory 'rkisp1' with parent '/' already present!
```
Fix it by using the device name for the debugfs subdirectory name
instead of the driver name, thus preventing name collision.
Link: https://lore.kernel.org/linux-media/20211010175457.438627-1-mike.rudenko@gmail.com
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Evgeny Novikov [Sat, 14 Aug 2021 15:57:42 +0000 (17:57 +0200)]
media: pt3: Switch to using functions pcim_* and devm_*
pt3_probe() did not free one of IO mappings in case when one of them was
successful while another one failed. The patch fixed that by using
functions pcim_*. Also, it simplifies error handling through switching
to devm_* functions.
Found by Linux Driver Verification project (linuxtesting.org).
Link: https://lore.kernel.org/linux-media/20210814155742.11392-1-novikov@ispras.ru
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Co-developed-by: Kirill Shilimanov <kirill.shilimanov@huawei.com>
Signed-off-by: Kirill Shilimanov <kirill.shilimanov@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Anton Vasilyev [Thu, 22 Aug 2019 10:41:47 +0000 (12:41 +0200)]
media: dw2102: Fix use after free
dvb_usb_device_init stores parts of properties at d->props
and d->desc and uses it on dvb_usb_device_exit.
Free of properties on module probe leads to use after free.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204597
The patch makes properties static instead of allocated on heap to prevent
memleak and use after free.
Also fixes s421_properties.devices initialization to have 2 element
instead of 6 copied from p7500_properties.
[mchehab: fix function call alignments]
Link: https://lore.kernel.org/linux-media/20190822104147.4420-1-vasilyev@ispras.ru
Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Fixes:
299c7007e936 ("media: dw2102: Fix memleak on sequence of probes")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Michael Tretter [Mon, 29 Nov 2021 11:27:06 +0000 (12:27 +0100)]
media: imx6-mipi-csi2: use pre_streamon callback to set sensor into LP11
Step 5 expects that the sensor is in LP11 mode. Use the new
pre_streamon callback to signal the sensor that it should switch into
LP11.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Andy Shevchenko [Thu, 2 Dec 2021 21:03:35 +0000 (22:03 +0100)]
media: i2c: max9286: Get rid of duplicate of_node assignment
GPIO library does copy the of_node from the parent device of
the GPIO chip, there is no need to repeat this in the individual
drivers. Remove assignment here.
For the details one may look into the of_gpio_dev_init() implementation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sakari Ailus [Fri, 26 Nov 2021 08:04:42 +0000 (09:04 +0100)]
media: max96712: Depend on VIDEO_V4L2
Depend on VIDEO_V4L2 for the driver actually depends on it, failing to
compile otherwise.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Benjamin Gaignard [Wed, 8 Dec 2021 16:44:18 +0000 (17:44 +0100)]
media: hantro: Fix G2/HEVC negotiated pixelformat
G2/HEVC is broken because driver capture queue pixelformat ioctl G_FMT
returns VT12 while G2/HEVC always generate NV12 frames:
video1: VIDIOC_S_FMT: type=vid-out-mplane, width=2560, height=1600, format=S265 little-endian (0x35363253), field=none, colorspace=0, num_planes=1, flags=0x0, ycbcr_enc=0, quantization=0, xfer_func=0
plane 0: bytesperline=0 sizeimage=6144000
video1: VIDIOC_S_EXT_CTRLS: which=0x0, count=1, error_idx=0, request_fd=0, name=HEVC Sequence Parameter Set, id/size=0x990cf0/32
video1: VIDIOC_G_FMT: type=vid-cap-mplane, width=2560, height=1600, format=VT12 little-endian (0x32315456), field=none, colorspace=0, num_planes=1, flags=0x0, ycbcr_enc=0, quantization=0, xfer_func=0
plane 0: bytesperline=2560 sizeimage=6144000
video1: VIDIOC_ENUM_FMT: index=0, type=vid-cap-mplane, flags=0x0, pixelformat=NV12 little-endian (0x3231564e), mbus_code=0x0000, description='Y/CbCr 4:2:0'
video1: VIDIOC_ENUM_FMT: error -22: index=1, type=vid-cap-mplane, flags=0x0, pixelformat=.... little-endian (0x00000000), mbus_code=0x0000, description=''
video1: VIDIOC_G_FMT: type=vid-cap-mplane, width=2560, height=1600, format=VT12 little-endian (0x32315456), field=none, colorspace=0, num_planes=1, flags=0x0, ycbcr_enc=0, quantization=0, xfer_func=0
Use the postprocessor functions introduced by Hantro G2/VP9 codec series
to fix the issue and remove duplicated buffer management.
This allow Hantro G2/HEVC to produce NV12_4L4 and NV12.
Fluster scores are 77/147 for HEVC and 129/303 for VP9 (no regression).
Beauty, Jockey and ShakeNDry bitstreams from UVG (http://ultravideo.fi/)
set have also been tested.
Fixes:
53a3e71095c5 ("media: hantro: Simplify postprocessor")
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sean Young [Mon, 6 Dec 2021 11:03:47 +0000 (12:03 +0100)]
media: streamzap: remove redundant gap calculations
The lirc core already introduces gaps, so there is no need for this in
the driver.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sean Young [Mon, 6 Dec 2021 10:59:41 +0000 (11:59 +0100)]
media: streamzap: remove unused struct members
These struct members do not serve any purpose.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sean Young [Sun, 5 Dec 2021 21:38:20 +0000 (22:38 +0100)]
media: streamzap: less chatter
Remove superfluous messages which add no information.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sean Young [Sun, 5 Dec 2021 17:10:36 +0000 (18:10 +0100)]
media: streamzap: no need for usb pid/vid in device name
The usb pid/vid can be found elsewhere, the idVendor/idProduct usb sysfs
files for example.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sean Young [Sun, 5 Dec 2021 17:06:30 +0000 (18:06 +0100)]
media: streamzap: remove unnecessary ir_raw_event_reset and handle
There is no reason to have a reset after an IR timeout.
Calling ir_raw_event_handle() twice for the same interrupt has no
affect.
Fixes:
56b0ec30c4bc ("[media] rc/streamzap: fix reporting response times")
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sean Young [Tue, 30 Nov 2021 22:58:19 +0000 (23:58 +0100)]
media: igorplugusb: receiver overflow should be reported
Without this, some IR will be missing mid-stream and we might decode
something which never really occurred.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sean Young [Sat, 27 Nov 2021 17:55:51 +0000 (18:55 +0100)]
media: winbond-cir: no need for reset after resume
An IR reset is only used when the IR hardware reports an error.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sean Young [Sat, 27 Nov 2021 13:53:49 +0000 (14:53 +0100)]
media: iguanair: no need for reset after IR receiver enable
An IR reset is only used when the IR hardware reports an error.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sean Young [Sat, 27 Nov 2021 11:46:58 +0000 (12:46 +0100)]
media: lirc: always send timeout reports
Without timeout reports, it is impossible to decode many protocols since
it is not known when the transmission ends. timeout reports are sent by
default, but can be turned off. There is no reason to turn them off, and
I cannot find any software which does this, so we can safely remove it.
This makes the ioctl LIRC_SET_REC_TIMEOUT_REPORTS a no-op.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans de Goede [Fri, 3 Dec 2021 10:28:54 +0000 (11:28 +0100)]
platform/x86: int3472: Deal with probe ordering issues
The clk and regulator frameworks expect clk/regulator consumer-devices
to have info about the consumed clks/regulators described in the device's
fw_node.
To work around this info missing from the ACPI tables on devices where
the int3472 driver is used, the int3472 MFD-cell drivers attach info about
consumers to the clks/regulators when registering these.
This causes problems with the probe ordering wrt drivers for consumers
of these clks/regulators. Since the lookups are only registered when the
provider-driver binds, trying to get these clks/regulators before then
results in a -ENOENT error for clks and a dummy regulator for regulators.
All the sensor ACPI fw-nodes have a _DEP dependency on the INT3472 ACPI
fw-node, so to work around these probe ordering issues the ACPI core /
i2c-code does not instantiate the I2C-clients for any ACPI devices
which have a _DEP dependency on an INT3472 ACPI device until all
_DEP-s are met.
This relies on acpi_dev_clear_dependencies() getting called by the driver
for the _DEP-s when they are ready, add a acpi_dev_clear_dependencies()
call to the discrete.c probe code.
In the tps68470 case calling acpi_dev_clear_dependencies() is already done
by the acpi_gpiochip_add() call done by the driver for the GPIO MFD cell
(The GPIO cell is deliberately the last cell created to make sure the
clk + regulator cells are already instantiated when this happens).
However for proper probe ordering, the clk/regulator cells must not just
be instantiated the must be fully ready (the clks + regulators must be
registered with their subsystems).
Add MODULE_SOFTDEP dependencies for the clk and regulator drivers for
the instantiated MFD-cells so that these are loaded before us and so
that they bind immediately when the platform-devs are instantiated.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211203102857.44539-12-hdegoede@redhat.com
Hans de Goede [Fri, 3 Dec 2021 10:28:53 +0000 (11:28 +0100)]
platform/x86: int3472: Pass tps68470_regulator_platform_data to the tps68470-regulator MFD-cell
Pass tps68470_regulator_platform_data to the tps68470-regulator
MFD-cell, specifying the voltages of the various regulators and
tying the regulators to the sensor supplies so that sensors which use
the TPS68470 can find their regulators.
Since the voltages and supply connections are board-specific, this
introduces a DMI matches int3472_tps68470_board_data struct which
contains the necessary per-board info.
This per-board info also includes GPIO lookup information for the
sensor IO lines which may be connected to the tps68470 GPIOs.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211203102857.44539-11-hdegoede@redhat.com
Hans de Goede [Fri, 3 Dec 2021 10:28:52 +0000 (11:28 +0100)]
platform/x86: int3472: Pass tps68470_clk_platform_data to the tps68470-regulator MFD-cell
Pass tps68470_clk_platform_data to the tps68470-clk MFD-cell,
so that sensors which use the TPS68470 can find their clock.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211203102857.44539-10-hdegoede@redhat.com
Hans de Goede [Fri, 3 Dec 2021 10:28:51 +0000 (11:28 +0100)]
platform/x86: int3472: Add get_sensor_adev_and_name() helper
The discrete.c code is not the only code which needs to lookup the
acpi_device and device-name for the sensor for which the INT3472
ACPI-device is a GPIO/clk/regulator provider.
The tps68470.c code also needs this functionality, so factor this
out into a new get_sensor_adev_and_name() helper.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211203102857.44539-9-hdegoede@redhat.com
Hans de Goede [Fri, 3 Dec 2021 10:28:50 +0000 (11:28 +0100)]
platform/x86: int3472: Split into 2 drivers
The intel_skl_int3472.ko module contains 2 separate drivers,
the int3472_discrete platform driver and the int3472_tps68470
I2C-driver.
These 2 drivers contain very little shared code, only
skl_int3472_get_acpi_buffer() and skl_int3472_fill_cldb() are
shared.
Split the module into 2 drivers, linking the little shared code
directly into both.
This will allow us to add soft-module dependencies for the
tps68470 clk, gpio and regulator drivers to the new
intel_skl_int3472_tps68470.ko to help with probe ordering issues
without causing these modules to get loaded on boards which only
use the int3472_discrete platform driver.
While at it also rename the .c and .h files to remove the
cumbersome intel_skl_int3472_ prefix.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211203102857.44539-8-hdegoede@redhat.com
Hans de Goede [Fri, 3 Dec 2021 10:28:47 +0000 (11:28 +0100)]
platform_data: Add linux/platform_data/tps68470.h file
The clk and regulator frameworks expect clk/regulator consumer-devices
to have info about the consumed clks/regulators described in the device's
fw_node.
To work around cases where this info is not present in the firmware tables,
which is often the case on x86/ACPI devices, both frameworks allow the
provider-driver to attach info about consumers to the provider-device
during probe/registration of the provider device.
The TI TPS68470 PMIC is used x86/ACPI devices with the consumer-info
missing from the ACPI tables. Thus the tps68470-clk and tps68470-regulator
drivers must provide the consumer-info at probe time.
Define tps68470_clk_platform_data and tps68470_regulator_platform_data
structs to allow the x86 platform code to pass the necessary consumer info
to these drivers.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211203102857.44539-5-hdegoede@redhat.com
Hans de Goede [Fri, 3 Dec 2021 10:28:46 +0000 (11:28 +0100)]
i2c: acpi: Add i2c_acpi_new_device_by_fwnode() function
Change i2c_acpi_new_device() into i2c_acpi_new_device_by_fwnode() and
add a static inline wrapper providing the old i2c_acpi_new_device()
behavior.
This is necessary because in some cases we may only have access
to the fwnode / acpi_device and not to the matching physical-node
struct device *.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211203102857.44539-4-hdegoede@redhat.com
Hans de Goede [Fri, 3 Dec 2021 10:28:45 +0000 (11:28 +0100)]
i2c: acpi: Use acpi_dev_ready_for_enumeration() helper
The clk and regulator frameworks expect clk/regulator consumer-devices
to have info about the consumed clks/regulators described in the device's
fw_node.
To work around cases where this info is not present in the firmware tables,
which is often the case on x86/ACPI devices, both frameworks allow the
provider-driver to attach info about consumers to the clks/regulators
when registering these.
This causes problems with the probe ordering wrt drivers for consumers
of these clks/regulators. Since the lookups are only registered when the
provider-driver binds, trying to get these clks/regulators before then
results in a -ENOENT error for clks and a dummy regulator for regulators.
To ensure the correct probe-ordering the ACPI core has code to defer the
enumeration of consumers affected by this until the providers are ready.
Call the new acpi_dev_ready_for_enumeration() helper to avoid
enumerating / instantiating i2c-clients too early.
Acked-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211203102857.44539-3-hdegoede@redhat.com
Hans de Goede [Fri, 3 Dec 2021 10:28:44 +0000 (11:28 +0100)]
ACPI: delay enumeration of devices with a _DEP pointing to an INT3472 device
The clk and regulator frameworks expect clk/regulator consumer-devices
to have info about the consumed clks/regulators described in the device's
fw_node.
To work around cases where this info is not present in the firmware tables,
which is often the case on x86/ACPI devices, both frameworks allow the
provider-driver to attach info about consumers to the clks/regulators
when registering these.
This causes problems with the probe ordering wrt drivers for consumers
of these clks/regulators. Since the lookups are only registered when the
provider-driver binds, trying to get these clks/regulators before then
results in a -ENOENT error for clks and a dummy regulator for regulators.
One case where we hit this issue is camera sensors such as e.g. the OV8865
sensor found on the Microsoft Surface Go. The sensor uses clks, regulators
and GPIOs provided by a TPS68470 PMIC which is described in an INT3472
ACPI device. There is special platform code handling this and setting
platform_data with the necessary consumer info on the MFD cells
instantiated for the PMIC under: drivers/platform/x86/intel/int3472.
For this to work properly the ov8865 driver must not bind to the I2C-client
for the OV8865 sensor until after the TPS68470 PMIC gpio, regulator and
clk MFD cells have all been fully setup.
The OV8865 on the Microsoft Surface Go is just one example, all X86
devices using the Intel IPU3 camera block found on recent Intel SoCs
have similar issues where there is an INT3472 HID ACPI-device, which
describes the clks and regulators, and the driver for this INT3472 device
must be fully initialized before the sensor driver (any sensor driver)
binds for things to work properly.
On these devices the ACPI nodes describing the sensors all have a _DEP
dependency on the matching INT3472 ACPI device (there is one per sensor).
This allows solving the probe-ordering problem by delaying the enumeration
(instantiation of the I2C-client in the ov8865 example) of ACPI-devices
which have a _DEP dependency on an INT3472 device.
The new acpi_dev_ready_for_enumeration() helper used for this is also
exported because for devices, which have the enumeration_by_parent flag
set, the parent-driver will do its own scan of child ACPI devices and
it will try to enumerate those during its probe(). Code doing this such
as e.g. the i2c-core-acpi.c code must call this new helper to ensure
that it too delays the enumeration until all the _DEP dependencies are
met on devices which have the new honor_deps flag set.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211203102857.44539-2-hdegoede@redhat.com
Zhen Lei [Thu, 3 Jun 2021 07:10:09 +0000 (09:10 +0200)]
media: bttv: use DEVICE_ATTR_RO() helper macro
Use DEVICE_ATTR_RO() helper macro instead of DEVICE_ATTR(), which is
simpler and more readable.
Due to the name of the read function of the sysfs attribute is normalized,
there is a natural association.
Link: https://lore.kernel.org/linux-media/20210603071009.11438-1-thunder.leizhen@huawei.com
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cai Huoqing [Thu, 16 Sep 2021 02:00:05 +0000 (04:00 +0200)]
media: b2c2: flexcop: Convert to SPDX identifier
use SPDX-License-Identifier instead of a verbose license text
Link: https://lore.kernel.org/linux-media/20210916020006.8497-1-caihuoqing@baidu.com
CC: Mauro Carvalho Chehab <mchehab@kernel.org>, <linux-media@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Krzysztof Kozlowski [Fri, 17 Sep 2021 09:21:32 +0000 (11:21 +0200)]
media: siano: remove duplicate USB device IDs
The devices 0x187f,0x0202 and 0x187f,0x0301 are already on the list.
Link: https://lore.kernel.org/linux-media/20210917092132.19576-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Mon, 6 Dec 2021 14:34:19 +0000 (15:34 +0100)]
media: m920x: don't use stack on USB reads
Using stack-allocated pointers for USB message data don't work.
This driver is almost OK with that, except for the I2C read
logic.
Fix it by using a temporary read buffer, just like on all other
calls to m920x_read().
Link: https://lore.kernel.org/all/ccc99e48-de4f-045e-0fe4-61e3118e3f74@mida.se/
Reported-by: rkardell@mida.se
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Uwe Kleine-König [Tue, 12 Oct 2021 15:39:32 +0000 (17:39 +0200)]
media: cxd2880: Eliminate dead code
An spi remove callback is never called with an spi_device pointer that
is NULL. Also it is only called for devices that probed successfully. As
cxd2880_spi_probe() always sets driver data, spi_get_drvdata() cannot be
NULL.
Also the return value of spi remove callbacks is ignored anyway and not
freeing resources in .remove() is a bad idea.
Link: https://lore.kernel.org/linux-media/20211012153945.2651412-8-u.kleine-koenig@pengutronix.de
Cc: Mark Brown <broonie@kernel.org>, kernel@pengutronix.de, linux-media@vger.kernel.org, linux-spi@vger.kernel.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Uwe Kleine-König [Tue, 26 Oct 2021 19:40:10 +0000 (21:40 +0200)]
media: tua9001: Improve messages in .remove's error path
If disabling the hardware fails the driver propagates the error code to
the i2c core. However this only results in a generic error message; the
device still disappears.
So instead emit a message that better describes the actual problem than
the i2c core's "remove failed (ESOMETHING), will be ignored" and return
0 to suppress the generic message.
Link: https://lore.kernel.org/linux-media/20211026194010.109029-1-u.kleine-koenig@pengutronix.de
Cc: linux-media@vger.kernel.org, kernel@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Daniel Kamil Kozar [Fri, 19 Nov 2021 23:44:01 +0000 (00:44 +0100)]
media: Print chip type explicitly when loading the Rafael Micro r820t module
The module currently prints only "Rafael Micro r820t successfully
identified" when successfully loaded, which might be misleading as the
module actually supports various chip types.
Link: https://lore.kernel.org/linux-media/20211119234401.271193-1-dkk089@gmail.com
Cc: linux-kernel@vger.kernel.org, Daniel Kamil Kozar <dkk089@gmail.com>
Signed-off-by: Daniel Kamil Kozar <dkk089@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Colin Ian King [Tue, 23 Nov 2021 09:06:45 +0000 (10:06 +0100)]
media: media si2168: Fix spelling mistake "previsously" -> "previously"
There is a spelling mistake in a dev_dbg message. Fix it.
Link: https://lore.kernel.org/linux-media/20211123090645.165299-1-colin.i.king@gmail.com
Cc: kernel-janitors@vger.kernel.org, linux-kernel@vger.kernel.org
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Robert Schlabbach [Wed, 1 Dec 2021 21:08:43 +0000 (22:08 +0100)]
media: si2157: Fix "warm" tuner state detection
Commit
e955f959ac52 ("media: si2157: Better check for running tuner in
init") completely broke the "warm" tuner detection of the si2157 driver
due to a simple endian error: The Si2157 CRYSTAL_TRIM property code is
0x0402 and needs to be transmitted LSB first. However, it was inserted
MSB first, causing the warm detection to always fail and spam the kernel
log with tuner initialization messages each time the DVB frontend
device was closed and reopened:
[ 312.215682] si2157 16-0060: found a 'Silicon Labs Si2157-A30'
[ 312.264334] si2157 16-0060: firmware version: 3.0.5
[ 342.248593] si2157 16-0060: found a 'Silicon Labs Si2157-A30'
[ 342.295743] si2157 16-0060: firmware version: 3.0.5
[ 372.328574] si2157 16-0060: found a 'Silicon Labs Si2157-A30'
[ 372.385035] si2157 16-0060: firmware version: 3.0.5
Also, the reinitializations were observed disturb _other_ tuners on
multi-tuner cards such as the Hauppauge WinTV-QuadHD, leading to missed
or errored packets when one of the other DVB frontend devices on that
card was opened.
Fix the order of the property code bytes to make the warm detection work
again, also reducing the tuner initialization message in the kernel log
to once per power-on, as well as fixing the interference with other
tuners.
Link: https://lore.kernel.org/linux-media/trinity-2a86eb9d-6264-4387-95e1-ba7b79a4050f-1638392923493@3c-app-gmx-bap03
Fixes:
e955f959ac52 ("media: si2157: Better check for running tuner in init")
Reported-by: Robert Schlabbach <robert_s@gmx.net>
Signed-off-by: Robert Schlabbach <robert_s@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Colin Ian King [Sun, 5 Dec 2021 00:37:45 +0000 (01:37 +0100)]
media: c8sectpfe: remove redundant assignment to pointer tsin
Pointer tsin is being assigned a value that is never read. The assignment
is redundant and can be removed.
Link: https://lore.kernel.org/linux-media/20211205003745.227491-1-colin.i.king@gmail.com
Cc: kernel-janitors@vger.kernel.org
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Akira Yokosawa [Sat, 4 Dec 2021 03:37:35 +0000 (04:37 +0100)]
media: docs: media: Fix imbalance of LaTeX group
The beginning part of the "existing HSV/HSL formats" table (line 7742)
reads:
.. raw:: latex
\begingroup
\tiny
\setlength{\tabcolsep}{2pt}
However, the ending part (line 7834) reads:
.. raw:: latex
\normalsize
Fix the imbalance by replacing the \normalsize with \endgroup.
Note:
Actually, the imbalance is harmless and just results in an
informative message near the bottom of userspace-api.log:
(\end occurred inside a group at level 1)
### semi simple group (level 1) entered at line 70696 (\begingroup)
### bottom level
Link: https://lore.kernel.org/linux-media/b3eeec4d-1a34-0a1a-3097-1ddea3b5f1c8@gmail.com
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tsuchiya Yuto [Wed, 1 Dec 2021 14:19:04 +0000 (15:19 +0100)]
media: atomisp: fix "variable dereferenced before check 'asd'"
There are two occurrences where the variable 'asd' is dereferenced
before check. Fix this issue by using the variable after the check.
Link: https://lore.kernel.org/linux-media/20211122074122.GA6581@kili/
Link: https://lore.kernel.org/linux-media/20211201141904.47231-1-kitakar@gmail.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Colin Ian King [Mon, 29 Nov 2021 23:06:26 +0000 (00:06 +0100)]
media: atomisp: make array idx_map static const
Don't populate the array idx_map on the stack but instead make it
static const. Also makes the object code smaller by 16 bytes.
Link: https://lore.kernel.org/linux-media/20211129230626.549090-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Dafna Hirschfeld [Wed, 1 Dec 2021 22:56:51 +0000 (23:56 +0100)]
media: videobuf2: add WARN_ON_ONCE if bytesused is bigger than buffer length
In function vb2_set_plane_payload, report if the given bytesused is
bigger than the buffer size, and clamp it to the buffer size.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Dafna Hirschfeld [Wed, 1 Dec 2021 22:56:50 +0000 (23:56 +0100)]
media: replace setting of bytesused with vb2_set_plane_payload
In many places the bytesused field of struct vb2_buffer is set
directly. Replace that with the function call
vb2_set_plane_payload
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Wed, 1 Dec 2021 12:41:26 +0000 (13:41 +0100)]
media: cec: fix a deadlock situation
The cec_devnode struct has a lock meant to serialize access
to the fields of this struct. This lock is taken during
device node (un)registration and when opening or releasing a
filehandle to the device node. When the last open filehandle
is closed the cec adapter might be disabled by calling the
adap_enable driver callback with the devnode.lock held.
However, if during that callback a message or event arrives
then the driver will call one of the cec_queue_event()
variants in cec-adap.c, and those will take the same devnode.lock
to walk the open filehandle list.
This obviously causes a deadlock.
This is quite easy to reproduce with the cec-gpio driver since that
uses the cec-pin framework which generated lots of events and uses
a kernel thread for the processing, so when adap_enable is called
the thread is still running and can generate events.
But I suspect that it might also happen with other drivers if an
interrupt arrives signaling e.g. a received message before adap_enable
had a chance to disable the interrupts.
This patch adds a new mutex to serialize access to the fhs list.
When adap_enable() is called the devnode.lock mutex is held, but
not devnode.lock_fhs. The event functions in cec-adap.c will now
use devnode.lock_fhs instead of devnode.lock, ensuring that it is
safe to call those functions from the adap_enable callback.
This specific issue only happens if the last open filehandle is closed
and the physical address is invalid. This is not something that
happens during normal operation, but it does happen when monitoring
CEC traffic (e.g. cec-ctl --monitor) with an unconfigured CEC adapter.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: <stable@vger.kernel.org> # for v5.13 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Wed, 1 Dec 2021 12:41:25 +0000 (13:41 +0100)]
media: cec-pin: fix interrupt en/disable handling
The en/disable_irq() functions keep track of the 'depth': i.e. if
interrupts are disabled twice, then it needs to enable_irq() calls to
enable them again. The cec-pin framework didn't take this into accound
and could disable irqs multiple times, and it expected that a single
enable_irq() would enable them again.
Move all calls to en/disable_irq() to the kthread where it is easy
to keep track of the current irq state and ensure that multiple
en/disable_irq calls never happen.
If interrupts where disabled twice, then they would never turn on
again, leaving the CEC adapter in a dead state.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes:
865463fc03ed (media: cec-pin: add error injection support)
Cc: <stable@vger.kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Wed, 1 Dec 2021 12:28:55 +0000 (13:28 +0100)]
media: cec-pin: drop unused 'enabled' field from struct cec_pin
This field is only set, but never used. Drop it.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Rikard Falkeborn [Tue, 30 Nov 2021 21:27:00 +0000 (22:27 +0100)]
media: s5p-jpeg: Constify struct v4l2_m2m_ops
The only usage of the v4l2_m2m_ops structs is to pass their address to
v4l2_m2m_init() which takes a pointer to const struct v4l2_m2m_ops as
argument. Make them const to allow the compiler to put them in read-only
memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Zhou Qingyang [Tue, 30 Nov 2021 16:34:44 +0000 (17:34 +0100)]
media: saa7146: mxb: Fix a NULL pointer dereference in mxb_attach()
In mxb_attach(dev, info), saa7146_vv_init() is called to allocate a
new memory for dev->vv_data. saa7146_vv_release() will be called on
failure of mxb_probe(dev). There is a dereference of dev->vv_data
in saa7146_vv_release(), which could lead to a NULL pointer dereference
on failure of saa7146_vv_init().
Fix this bug by adding a check of saa7146_vv_init().
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_VIDEO_MXB=m show no new warnings,
and our static analyzer no longer warns about this code.
Fixes:
03b1930efd3c ("V4L/DVB: saa7146: fix regression of the av7110/budget-av driver")
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Zhou Qingyang [Tue, 30 Nov 2021 16:25:49 +0000 (17:25 +0100)]
media: saa7146: hexium_orion: Fix a NULL pointer dereference in hexium_attach()
In hexium_attach(dev, info), saa7146_vv_init() is called to allocate
a new memory for dev->vv_data. In hexium_detach(), saa7146_vv_release()
will be called and there is a dereference of dev->vv_data in
saa7146_vv_release(), which could lead to a NULL pointer dereference
on failure of saa7146_vv_init() according to the following logic.
Both hexium_attach() and hexium_detach() are callback functions of
the variable 'extension', so there exists a possible call chain directly
from hexium_attach() to hexium_detach():
hexium_attach(dev, info) -- fail to alloc memory to dev->vv_data
| in saa7146_vv_init().
|
|
hexium_detach() -- a dereference of dev->vv_data in saa7146_vv_release()
Fix this bug by adding a check of saa7146_vv_init().
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_VIDEO_HEXIUM_ORION=m show no new warnings,
and our static analyzer no longer warns about this code.
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Zhou Qingyang [Tue, 30 Nov 2021 15:38:05 +0000 (16:38 +0100)]
media: dib8000: Fix a memleak in dib8000_init()
In dib8000_init(), the variable fe is not freed or passed out on the
failure of dib8000_identify(&state->i2c), which could lead to a memleak.
Fix this bug by adding a kfree of fe in the error path.
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_DVB_DIB8000=m show no new warnings,
and our static analyzer no longer warns about this code.
Fixes:
77e2c0f5d471 ("V4L/DVB (12900): DiB8000: added support for DiBcom ISDB-T/ISDB-Tsb demodulator DiB8000")
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Niklas Söderlund [Sun, 28 Nov 2021 13:24:59 +0000 (14:24 +0100)]
media: rcar-vin: Do not hold the group lock when unregistering notifier
There is no need to hold the group lock when unregistering the notifier,
but doing so triggers a warning about a possible cyclic lock dependency.
The lock warning cover the case where a subdevice is about to be bound
to the notifier at the same time as it's unregistered. The locking for
this scenario is handled in the v4l2-async framework so it's safe to
remove the lock in the driver. This match the locking logic in the
driver for when the notifier in question is registered.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Niklas Söderlund [Sun, 28 Nov 2021 13:24:47 +0000 (14:24 +0100)]
media: rcar-vin: Disallow unbinding and binding of individual VINs
The VIN driver have an internal concept of capture groups that covers
multiple instances of the driver. This is handled using the shared media
graph and a single notifier shared between all VIN instances.
This design do not work well if an individual VIN where to be unbound on
its own. The design could be improved up on to allow for this but would
require large changes in the v4l2-async framework. To avoid the
situation suppress the bind and unbind nodes in sysfs.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
projects / platform / kernel / linux-starfive.git / log