Ashish K Singh [Fri, 10 Feb 2012 12:59:44 +0000 (18:29 +0530)]
staging/matrix: driver for Matrix 2.5, an internal performance tool.
BZ: 22055
This driver adds support for the user-space Matrix tool.
Change-Id: I636fa2d826aeee9f100b3d824127e7f0a24eafd7
Signed-off-by: Ashish K Singh <ashish.k.singh@intel.com>
Reviewed-on: http://android.intel.com:8080/34907
Reviewed-by: Gross, Mark <mark.gross@intel.com>
Reviewed-by: Hogander, Jouni <jouni.hogander@intel.com>
Reviewed-by: Koskinen, Ilkka <ilkka.koskinen@intel.com>
Tested-by: Martin, LoicX <loicx.martin@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Yanmin Zhang [Mon, 26 Mar 2012 18:34:55 +0000 (02:34 +0800)]
[REVERT ME] tty-ffl: Change ffl_hangup_wq to be a freezable workqueue
BZ:27289
When system goes to s3, tty-ffl might detect a modem TX timeout
and start error recovery before hsi is resumed. The patch
changes workqueue ffl_hangup_wq to be freezable.
Change-Id: I5b9e7b1bffccfc016afd4e373e2ba438a81680a0
Signed-off-by: Yanmin Zhang <yanmin.zhang@intel.com>
Reviewed-on: http://android.intel.com:8080/40789
Reviewed-by: Roulliere, Pierre <pierre.roulliere@intel.com>
Reviewed-by: Chotard, Celine <celine.chotard@intel.com>
Tested-by: Chotard, Celine <celine.chotard@intel.com>
Reviewed-by: Predon, Frederic <frederic.predon@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
wu xia [Sun, 1 Apr 2012 10:35:14 +0000 (18:35 +0800)]
usb: improve the usb performance of adb push/pull file
BZ: 24941
The usb performance is low when adb push/pull files to/from PR3 phone.
The reason is that USB interrupt is delayed by OTG device controller.
USB interrupt interval is controlled by USBCMD.ITC. The default value
of ITC is a little high. Set ITC to low value to shorten interrupt
interval.
Change-Id: I85577648e5d0844aaf05ed343c393cad5619f375
Signed-off-by: wu xia <xia.wu@intel.com>
Reviewed-on: http://android.intel.com:8080/39931
Reviewed-by: Gross, Mark <mark.gross@intel.com>
Tested-by: Sun, Jianhua <jianhua.sun@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Louis Le Gall [Tue, 27 Mar 2012 11:17:35 +0000 (13:17 +0200)]
Enable VOIP SSP Driver on CTP
BZ: 21780
This patch modify the 'builtin' voip ssp driver to a format
compatible with hw codecs (MSIC, but mostly Cirrus logic that
is not able to provide master pcm format as legacy used on
medfield platforms)
In this new format, the SSP provides Master I2S 16 bits@48Khz
First channel (Framesync low) : 16bits of channel 1 data
second channel (framesync high) : 16bits of channel 2 data +
8 dummy bits (clk is running at 1.923Mhz need 40bits)
This signal is comptatible with audience and two version of hw
codecs as it is very close to signal provided by modem (i2s 48hz
without dummy bits)
Please note that platform modification is required to change
hw codec configuration and audience firmware to take care of
voip signal format modification.
Change-Id: I73323201842345db85ab571df6f2f1a3f242b303
Signed-off-by: Louis Le Gall <louis.le.gall@intel.com>
Reviewed-on: http://android.intel.com:8080/40931
Reviewed-by: Bellouard, Jean-marieX <jean-mariex.bellouard@intel.com>
Reviewed-by: Centelles, Sylvain <sylvain.centelles@intel.com>
Reviewed-by: Gross, Mark <mark.gross@intel.com>
Tested-by: Mendi, EduardoX <eduardox.mendi@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
sathyanarayanan kuppuswamy [Wed, 21 Mar 2012 18:02:10 +0000 (11:02 -0700)]
Refactored board files
BZ:28671
Board files for different platforms have lot of common code, hence
to avoid code duplication we have re-factored the current board
file structure into following.
For each device we have created a separate platform_*device_name*.c,h
files.
platform_*device_name*.c - Contains device init and helper
functions.
platform_*device_name*.h - Contains extern declaration of init
function.
Compilation of these platform files are controlled using corresponding
driver CONFIG options.
To use these devices, In board files we will have to just include the
header file and add reference to the device init function in the
device_id structure.
Change-Id: I28f8add6f9ba96dcc6513cffe856cd2c487d09ee
Signed-off-by: sathyanarayanan kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
Reviewed-on: http://android.intel.com:8080/40278
Reviewed-by: Yang, Fei <fei.yang@intel.com>
Tested-by: Yang, Fei <fei.yang@intel.com>
Reviewed-by: Monroy, German <german.monroy@intel.com>
Reviewed-by: Gross, Mark <mark.gross@intel.com>
Reviewed-by: Wood, Brian J <brian.j.wood@intel.com>
Tested-by: Wood, Brian J <brian.j.wood@intel.com>
Tested-by: Ng, Cheon-woei <cheon-woei.ng@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Mark Allyn [Tue, 20 Mar 2012 17:16:48 +0000 (10:16 -0700)]
Drivers: staging: sep: add ioctl to insert shared address into msg
BZ: 28280
Change-Id: Ic27a4cda6f6ffdf6636f4f717f2137f5ab4333ad
Signed-off-by: Mark Allyn <mark.a.allyn@intel.com>
Reviewed-on: http://android.intel.com:8080/39816
Reviewed-by: Matthews, Michael L <michael.l.matthews@intel.com>
Reviewed-by: Mangalampalli, Jayant <jayant.mangalampalli@intel.com>
Tested-by: Mangalampalli, Jayant <jayant.mangalampalli@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
namarta [Mon, 2 Apr 2012 13:27:47 +0000 (18:57 +0530)]
Audio: Add Alsa mixer control to enable loopback.
BZ: 27786
By default,Loopback was enabled,this was causing issue with simultaneous
playback and capture.
This patch added alsa mixer control to enable loopback when required.
Change-Id: I8609927802bf819076cce43c5345f6f16aa3fbbf
Signed-off-by: namarta <namartax.kohli@intel.com>
Reviewed-on: http://android.intel.com:8080/42118
Reviewed-by: Agarwal, Vaibhav <vaibhav.agarwal@intel.com>
Reviewed-by: Vinnakota, Lakshmi N <lakshmi.n.vinnakota@intel.com>
Reviewed-by: M, Arulselvan <arulselvan.m@intel.com>
Tested-by: M, Arulselvan <arulselvan.m@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Kappel, LaurentX [Thu, 29 Mar 2012 15:53:15 +0000 (08:53 -0700)]
Revert "intel-mid: remove WA for smb347 charger"
BZ: 29047
This patch removes the WA for adding device entry
in intel-mid.c as the latest IFWI support device entry
for smb347 charger.
Old-Change-Id: Ic6ee390ae82c181dc51e1e6080a1a790bf1a4232
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
This reverts commit
b23a47438facee19378fb3db4c95a995e4f0b471
Change-Id: Ic3d8c963d3cfa11c3035fe8bd92adb6273b902af
Signed-off-by: Laurent Kappel <laurentx.kappel@intel.com>
Reviewed-on: http://android.intel.com:8080/41677
Reviewed-by: Lebouc, Christophe <christophe.lebouc@intel.com>
Tested-by: Lebouc, Christophe <christophe.lebouc@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Youvedeep Singh [Sat, 24 Mar 2012 16:25:36 +0000 (21:55 +0530)]
Revert "mfld-pmu: [REVERT ME] Acquiring Wake_lock to prevent S3 on CVT"
BZ: 25898
This reverts commit
db41b8e475625d7f7ffedee6cce1d0ea098ce980.
Removing the wakeLock, as we are going to enable S3.
Change-Id: Id0e0590a0c540189af654a1fd1666d67094529d8
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
Reviewed-on: http://android.intel.com:8080/40523
Reviewed-by: Mansoor, Illyas <illyas.mansoor@intel.com>
Reviewed-by: Cuesta, FernandX <fernandx.cuesta@intel.com>
Tested-by: Cuesta, FernandX <fernandx.cuesta@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Youvedeep Singh [Sat, 24 Mar 2012 16:07:50 +0000 (21:37 +0530)]
mfld-pmu: Removing C6 offload specific code on CVT PLatform.
BZ: 25898
C6 offload is not done by PMU Driver on CVT Platform.
It is handled by PUNIT FW on CVT Platform.
Change-Id: I50f5c6a592b9325150d3f833945086e2205a3baf
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
Reviewed-on: http://android.intel.com:8080/40522
Reviewed-by: Mansoor, Illyas <illyas.mansoor@intel.com>
Reviewed-by: Cuesta, FernandX <fernandx.cuesta@intel.com>
Tested-by: Cuesta, FernandX <fernandx.cuesta@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Youvedeep Singh [Sat, 24 Mar 2012 15:20:23 +0000 (20:50 +0530)]
mfld-pmu: [REVERT ME] Do not put SRAM in D0i3 during S0i3/S0i1/S3 on CVT Platform.
BZ: 25898
Putting SRAM (lss 12, lss 13) into D0ix caused SRAM Error (F504) on CVT Platform.
So keep it in D0 state untill issue is resolved.
This Work around we are tracking through BZ 28764.
Change-Id: I029800fd8841cc9abd635c7405fa60dd3deec240
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
Reviewed-on: http://android.intel.com:8080/40521
Reviewed-by: Mansoor, Illyas <illyas.mansoor@intel.com>
Reviewed-by: Gross, Mark <mark.gross@intel.com>
Reviewed-by: Cuesta, FernandX <fernandx.cuesta@intel.com>
Tested-by: Cuesta, FernandX <fernandx.cuesta@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Youvedeep Singh [Tue, 3 Apr 2012 09:13:52 +0000 (14:43 +0530)]
i386_mfld_defconfig: Adding Flag to indicate C6 Offload support in OS.
BZ: 25898
This Flag indicates if C6 Offload is to be Done by OS.
In case of mfld C6 offload is done by OS.
In case of CVT platform it is handled by PUNIT.
This Flag will be used to port the mfld Code into CVT.
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
Change-Id: I317508c1679664d673f36d219b023c9cdfc66934
Reviewed-on: http://android.intel.com:8080/42056
Reviewed-by: Mansoor, Illyas <illyas.mansoor@intel.com>
Reviewed-by: Cuesta, FernandX <fernandx.cuesta@intel.com>
Tested-by: Cuesta, FernandX <fernandx.cuesta@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Youvedeep Singh [Thu, 22 Mar 2012 15:13:49 +0000 (20:43 +0530)]
Revert "mfld-pmu: [REVERT ME] Enbaling PM ON Cloverview"
BZ: 25901
This reverts commit
7157dace4c5f3680d889b94befe16562f9752b38.
Currently Drivers are merged into CVT platform. Now we are not getting hanged at boot time.
This patch will put the devices into D0ix which do not have Drivers.
This is am importand patch for Power Optimisation.
Change-Id: If59ecb30fa13050603bfa0983b82691c7aa34593
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
Reviewed-on: http://android.intel.com:8080/39933
Reviewed-by: Mansoor, Illyas <illyas.mansoor@intel.com>
Reviewed-by: Cuesta, FernandX <fernandx.cuesta@intel.com>
Tested-by: Cuesta, FernandX <fernandx.cuesta@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Bin Gao [Thu, 29 Mar 2012 06:47:19 +0000 (23:47 -0700)]
atomisp: add pci id for CLV+ ISP device
BZ: 29564
CLV+ pci shim has a new PCI ID for ISP, now enable it from driver.
Change-Id: Ia9d3923ce2956c064392165aabca024660070202
Signed-off-by: Bin Gao <bin.gao@intel.com>
Reviewed-on: http://android.intel.com:8080/41587
Reviewed-by: Cohen, David A <david.a.cohen@intel.com>
Reviewed-by: Gross, Mark <mark.gross@intel.com>
Reviewed-by: Renganathan, Prabu <prabu.renganathan@intel.com>
Reviewed-by: Chilakala, Mallikarjuna <mallikarjuna.chilakala@intel.com>
Reviewed-by: Kruger, Jozef <jozef.kruger@intel.com>
Reviewed-by: Toivonen, Tuukka <tuukka.toivonen@intel.com>
Tested-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Omair Mohammed Abdullah [Tue, 13 Mar 2012 06:14:15 +0000 (11:44 +0530)]
EM/Battery: Make battery prints use dev_dbg
BZ: 16334
Some battery prints come periodically in the dmesg logs and fill up the logs.
Using dev_dbg instead of dev_info will make the prints dynamically configurable
using sysfs, so that they are turned on only when required.
Change-Id: I9882570344ffbd1c9d08ea87484a87b712046035
Signed-off-by: Omair Mohammed Abdullah <omair.m.abdullah@linux.intel.com>
Reviewed-on: http://android.intel.com:8080/38786
Reviewed-by: Abdullah, Omair M <omair.m.abdullah@intel.com>
Reviewed-by: Pallala, Ramakrishna <ramakrishna.pallala@intel.com>
Tested-by: Kallappa Manjanna, MadhukumarX <madhukumarx.kallappa.manjanna@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Gao, Yunpeng [Sun, 1 Apr 2012 22:32:43 +0000 (15:32 -0700)]
Revert "REVERT ME: Define CONFIG_BOARD_MRFLD_HVP"
BZ: 30074
This reverts commit
79b249f83b76ddad1d37553b5ad15e56e98ba5b7
Change-Id: I5118b93a27645a0e2fb76a9811fe82588fb549f6
Reviewed-on: http://android.intel.com:8080/42069
Reviewed-by: Gao, Yunpeng <yunpeng.gao@intel.com>
Tested-by: Gao, Yunpeng <yunpeng.gao@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Yunpeng Gao [Sun, 1 Apr 2012 07:18:45 +0000 (15:18 +0800)]
Add Merrifield HVP board type support
BZ: 30074
Merrifield HVP board is different from Merrifield VP board in
quite a few components, such as storage, usb, audio and so on.
So it's necessary to add a new macro in kernel board type for
Merrifield HVP.
This patch add a new board type macro CONFIG_BOARD_MRFLD_HVP
for Merrifield HVP board and also creat a new board specific
file board-hvp.c for HVP board specific.
Change-Id: Iaac388518979dae4df7d24062572e926d3d54aed
Signed-off-by: Yunpeng Gao <yunpeng.gao@intel.com>
Reviewed-on: http://android.intel.com:8080/42033
Reviewed-by: Tang, Richard <richard.tang@intel.com>
Reviewed-by: Brouat, Claude <claude.brouat@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Guillaume Lucas [Wed, 28 Mar 2012 14:02:20 +0000 (16:02 +0200)]
[PORT FROM R2][REVERT ME]n_gsm: add dedicated traces in MUX for APIMR issues
BZ: 25958
This patch is an update for the MUX driver in the goal to add
dedicated traces to have input for the APIMR issues.
Change-Id: I040ea3f27ad0816d724b16dc7ecb887051ce065d
Orig-Change-Id: I2c9a660e6c48153dcd680bd6b8db8d1683cc3f7a
Signed-off-by: Guillaume Lucas <guillaumex.lucas@intel.com>
Reviewed-on: http://android.intel.com:8080/41335
Reviewed-by: Predon, Frederic <frederic.predon@intel.com>
Reviewed-by: Lebsir, SamiX <samix.lebsir@intel.com>
Tested-by: Lebsir, SamiX <samix.lebsir@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Jozef Kruger [Thu, 29 Mar 2012 21:51:57 +0000 (14:51 -0700)]
atomisp: fix gdc table handling
BZ: 29626, 29628
This patch fixes the incorrect freeing of the morphing table when GDC_CAC
is enabled. When it gets enabled, we need to set the current morphing table
into the CSS again, not free it. Freeing the table that the CSS was still
using caused memory corruption which luckily only resulted in the table
being rejected but could have also lead to a corrupted table being used.
Change-Id: I67177757f32c6b4f35dd176999c59bd719586d9d
Signed-off-by: Jozef Kruger <jozef.kruger@intel.com>
Reviewed-on: http://android.intel.com:8080/41714
Reviewed-by: Koski, Anttu <anttu.koski@intel.com>
Tested-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Yu Wang [Sat, 31 Mar 2012 03:25:54 +0000 (11:25 +0800)]
xHCI: Enable USB HID and storage class driver.
BZ: 29957
Support USB3 stick, keyboard and mouse.
Change-Id: If0eddd38987581c03f1371f92d88a34858f1b25e
Signed-off-by: Yu Wang <yu.y.wang@intel.com>
Reviewed-on: http://android.intel.com:8080/41939
Reviewed-by: Meng, Zhe <zhe.meng@intel.com>
Tested-by: Meng, Zhe <zhe.meng@intel.com>
Reviewed-by: Tang, Richard <richard.tang@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Jiebing Li [Fri, 30 Mar 2012 15:46:38 +0000 (23:46 +0800)]
Enable Merrifield USB3 device support
BZ: 29924
Add USB3 device controller driver and super speed
support in Mass Storage gadget driver to fully
enable USB3 Mass Storage function.
Change-Id: I98e37ba91b09345f7f1f083efe491c8c7f587a15
Signed-off-by: Jiebing Li <jiebing.li@intel.com>
Reviewed-on: http://android.intel.com:8080/41909
Reviewed-by: Meng, Zhe <zhe.meng@intel.com>
Tested-by: Meng, Zhe <zhe.meng@intel.com>
Reviewed-by: Tang, Richard <richard.tang@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Yu Wang [Fri, 30 Mar 2012 09:34:22 +0000 (17:34 +0800)]
xHCI: Merrifield support xHCI driver.
BZ: 28067
Add new files to support dwc xHCI driver. The xHCI registered as platform device
driver which match the platform device registered in dwc otg driver.
Follow PCI xHCI driver, the dwc xHCI driver register two HCD too. So the
dwc xHCI driver is very simliar to common xHCI driver.
Enable DWC OTG driver and xHCI driver in Merrifield default config file.
Change-Id: Ifee09e14faf420679f15da4e3e95d5d8174f8ac3
Signed-off-by: Yu Wang <yu.y.wang@intel.com>
Signed-off-by: Yu Wang <yu.y.wang@intel.com>
Change-Id: I5bbda239407449a6cb4db2d190232ba1f7dd54ee
Reviewed-on: http://android.intel.com:8080/41870
Reviewed-by: Meng, Zhe <zhe.meng@intel.com>
Tested-by: Meng, Zhe <zhe.meng@intel.com>
Reviewed-by: Tang, Richard <richard.tang@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Yu Wang [Fri, 30 Mar 2012 08:08:31 +0000 (16:08 +0800)]
dwc_otg: Provide sysfs interface to user space to switch host mode and
device mode.
BZ: 29834
Because currently there is no workable micro A usb3 cable on market. So
provide sysfs interface to support switch host mode and device mode from
user space.
Usage(commands):
switch to host: echo A > /sys/devices/pci0000:00/0000:00:11:0/otg_id
switch to device: echo A > /sys/devices/pci0000:00/0000:00:11:0/otg_id
Signed-off-by: Yu Wang <yu.y.wang@intel.com>
Change-Id: I60a4cefa72508f6f3dc70abbea5bc8f954eb644b
Signed-off-by: Yu Wang <yu.y.wang@intel.com>
Reviewed-on: http://android.intel.com:8080/41865
Reviewed-by: Meng, Zhe <zhe.meng@intel.com>
Tested-by: Meng, Zhe <zhe.meng@intel.com>
Reviewed-by: Tang, Richard <richard.tang@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Yu Wang [Mon, 19 Mar 2012 18:51:41 +0000 (02:51 +0800)]
dwc_otg: Support dwc otg driver.
BZ: 28055
Add new otg interfaces in struct gadget and hcd.
Add new files to support dwc otg controller.
Change-Id: Ib17fd180f7126a5f66e2eb47a44ead0257988309
Signed-off-by: Yu Wang <yu.y.wang@intel.com>
Reviewed-on: http://android.intel.com:8080/39621
Reviewed-by: Meng, Zhe <zhe.meng@intel.com>
Tested-by: Meng, Zhe <zhe.meng@intel.com>
Reviewed-by: Tang, Richard <richard.tang@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Wu, Hao [Fri, 16 Mar 2012 07:10:25 +0000 (15:10 +0800)]
usb/penwell_otg: notify charger driver to drive VBUS in CLV
BZ: 28638
USB driver will notify charger driver to provide 5v on VBUS line
of USB OTG port in CLV, this is needed for USB Host function.
Change-Id: I151c254e95c89c9a615655911a8de6e7283ba18b
Signed-off-by: Wu, Hao <hao.wu@intel.com>
Reviewed-on: http://android.intel.com:8080/40194
Reviewed-by: Pallala, Ramakrishna <ramakrishna.pallala@intel.com>
Reviewed-by: Zhuang, Jin Can <jin.can.zhuang@intel.com>
Reviewed-by: Pandey, Raj <raj.pandey@intel.com>
Reviewed-by: Gross, Mark <mark.gross@intel.com>
Reviewed-by: Meng, Zhe <zhe.meng@intel.com>
Tested-by: Meng, Zhe <zhe.meng@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Pandey Raj [Fri, 30 Mar 2012 08:20:36 +0000 (13:50 +0530)]
EM/Battery: Charger driver to support the HOST mode functionality
BZ: 26199
Whenever an USB OTG device inserted/removed to the Clovertrail
platform bq24192 charger driver should turn the VBUS ON/OFF and
should be able to support the OTG device functionality. Setting
the GPIO direction to input during the VBUS OFF as not doing it
will break the HOST support on VV boards as GPIO 36 is muxed
Change-Id: I65359d9aa8e75acb5c4f49d4d84313931847e04d
Signed-off-by: Pandey Raj <raj.pandey@intel.com>
Reviewed-on: http://android.intel.com:8080/40182
Reviewed-by: Pallala, Ramakrishna <ramakrishna.pallala@intel.com>
Reviewed-by: Wu, Hao <hao.wu@intel.com>
Tested-by: Kallappa Manjanna, MadhukumarX <madhukumarx.kallappa.manjanna@intel.com>
Reviewed-by: Meng, Zhe <zhe.meng@intel.com>
Tested-by: Meng, Zhe <zhe.meng@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Li, Ning [Fri, 30 Mar 2012 08:47:42 +0000 (16:47 +0800)]
dw-i2c: porting MRFL I2C driver to ICS
BZ: 29848
This patch ports MRFL I2C driver to ICS mainline, including two main
changes: issue STOP after each transaction, controller bus index
mechanism change due to incompatible with MFLD & CTP.
Change-Id: I8e3d75eba8b09916fcd00e7611122428a46b3ae5
Signed-off-by: Li, Ning <ning.li@intel.com>
Reviewed-on: http://android.intel.com:8080/41866
Reviewed-by: Yang, Bin <bin.yang@intel.com>
Reviewed-by: Zhang, Shijie <shijie.zhang@intel.com>
Reviewed-by: Du, Alek <alek.du@intel.com>
Tested-by: Wang, Zhifeng <zhifeng.wang@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Shijie Zhang [Wed, 28 Mar 2012 22:39:51 +0000 (06:39 +0800)]
intel_scu_mip: update intel mip driver
BZ: 28902
Base on current IPC driver framework, it is not suitable to put MIP
access code inside IPC bus driver. So we move it to a dedicated mip
driver, to make it more clear in logic.
Change-Id: I2b2392f586d5c5ef17b3498cdfe6e58e396e7ebf
Signed-off-by: Shijie Zhang <shijie.zhang@intel.com>
Reviewed-on: http://android.intel.com:8080/41379
Reviewed-by: Du, Alek <alek.du@intel.com>
Tested-by: Wang, Zhifeng <zhifeng.wang@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Leo Yan [Sat, 31 Mar 2012 03:57:16 +0000 (11:57 +0800)]
apds990x: Check gpio status after handling IRQ
BZ: 29351
Since apds990x's interrupt pin is level style and some GPIO controllers
don't support level trigger, we need to check gpio pin value to
see if there is another interupt occurs between the interrupt status
register read and interrupt ack. If that happens, we need to do the
IRQ handle again to avert interrupt missing.
Change-Id: I09dd0049a4a520a92e22ecd1476b688ab56e2864
Signed-off-by: Leo Yan <leo.yan@intel.com>
Reviewed-on: http://android.intel.com:8080/41856
Reviewed-by: Du, Alek <alek.du@intel.com>
Tested-by: Wang, Zhifeng <zhifeng.wang@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
jli127 [Thu, 29 Mar 2012 08:28:57 +0000 (16:28 +0800)]
hwmon/l3g4200d_poll.c: extends device enable delay
BZ: 29384
The l3g4200d gyro sensor needs longer
delay after enable to generate stable data
in CTP_PR0 devices. This patch add a
longer delay after device enable.
Change-Id: I9bbf375ac301ae1072ba17afee440d69f1cbc78a
Signed-off-by: jli127 <jian.d.li@intel.com>
Reviewed-on: http://android.intel.com:8080/41608
Reviewed-by: Yan, Leo <leo.yan@intel.com>
Reviewed-by: Du, Alek <alek.du@intel.com>
Tested-by: Wang, Zhifeng <zhifeng.wang@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Yunpeng Gao [Fri, 30 Mar 2012 02:55:41 +0000 (10:55 +0800)]
EMMC4.5: Enable eMMC 4.5 Large Sector Size feature
BZ: 29677
According to eMMC Spec 4.5, enable large sector size feature
(4KB Native sector) can improve performance for eMMC device
bigger than 256GB.
To enable this feature, it needs to disable the emulation mode of
eMMC device first. Since the emulation mode disable is one-time
operation, it should be done by vendor or FW.
This patch will not disable emulation mode. It will just check
whether the eMMC device emulation mode has been disabled. If true,
then the driver will report kernel block layer with 4KB hardware
sector while keep 512B size block on eMMC bus. This is just what
the eMMC 4.5 Spec requires.
Change-Id: If0306654b49e823bfffc4583f353bf696d07441f
Signed-off-by: Yunpeng Gao <yunpeng.gao@intel.com>
Reviewed-on: http://android.intel.com:8080/41776
Tested-by: Sun, Jianhua <jianhua.sun@intel.com>
Reviewed-by: Tang, Richard <richard.tang@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
he bo [Wed, 28 Mar 2012 13:26:51 +0000 (21:26 +0800)]
mask the HDMI IRQ after suspend
BZ: 29566
when HDMI suspend, it should mask the HDMI IRQ, for it will generate
the HDMI plug out interrupt after shutdown the MSIC_VHDMICNT, and
the interrupt will wake up the system frequency if the HDMI cable
inserted.
Change-Id: Id8e9e368db9812ffe059ec1e4c969eeca959cbef
Signed-off-by: he, bo <bo.he@intel.com>
Signed-off-by: Rico, Tang <rico.tang@intel.com>
Reviewed-on: http://android.intel.com:8080/41583
Reviewed-by: Zhang, Yanmin <yanmin.zhang@intel.com>
Reviewed-by: Hogander, Jouni <jouni.hogander@intel.com>
Reviewed-by: Xu, Randy <randy.xu@intel.com>
Tested-by: Tong, BoX <box.tong@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Geng Xiujun [Thu, 29 Mar 2012 05:52:51 +0000 (13:52 +0800)]
HDMI/PM: Port two HDMI hotplug patches from R2
BZ: 29595
The issue is tracked by BZ 19079, HDMI cable plug/unplugged not detected when
device is in S0 with Screen OFF. Jouni's two patches are ported to R3.
0001-hdmi-Fixes-for-hdmi-hotplug-detection.patch
Remove random control of HDMI rails around gfx driver. Power on is now
done in psb_intel_hdmi.c:mdfld_hdmi_init during boot up.
Global variable hdmi_state is not updated properly when display is
blanked. Fix this by updating hdmi_state in hdmi_do_hotplug_wq.
Also msic_irq should be type IRQF_NO_SUSPEND to ensure hpd interrupts
are not lost.
0002-hdmi-Implement-hdmi-cable-detection.patch
According to MSIC HDMI Integration Guide both, VCC330 and VHDMI, must
be enabled hotplug detection to work. This would cause unacceptable
power leak in S3 state -> Take approach to have hotplug detection
working only when device is not in S3. HDMI cable Plug in/out during
S3 is detected when waking up from S3. This allows powering off VCC330
and VHDMI during S3.
To implement this following changes are done in this patch:
Create dedicated freezeable workqueue for hotplug detection to ensure
ongoing detection is stopped before powering off HDMI rails on
suspend and resumed only when rails are powered on again.
Add mechanism to detect cable plug out during S3 when waking up.
Change-Id: I161928534a3c6b197c0d2ac450e5587ff196a74b
Signed-off-by: Geng Xiujun <xiujun.geng@intel.com>
Reviewed-on: http://android.intel.com:8080/41579
Reviewed-by: Xu, Randy <randy.xu@intel.com>
Reviewed-by: Tong, BoX <box.tong@intel.com>
Tested-by: Tong, BoX <box.tong@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Ke Ai [Fri, 30 Mar 2012 00:06:51 +0000 (08:06 +0800)]
GFX-Display: support CTP command mode DSR.
BZ: 29754
1. update code of DSR mode enter condition
2. for 0x36 memory tranfer direction , it does not every time
need to send, so clear it.
3. fix command mode shift issue ,which lead by 0x70184 mistake
4. improve debug read interface, considering command mode
Change-Id: I49065908b72870d742870ed63c16961c785880b9
Signed-off-by: Ke Ai <ke.ai@intel.com>
Reviewed-on: http://android.intel.com:8080/41720
Reviewed-by: Tong, BoX <box.tong@intel.com>
Tested-by: Tong, BoX <box.tong@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Christophe Guerard [Thu, 8 Mar 2012 13:48:09 +0000 (14:48 +0100)]
[DEBUG] Enable debug features in kernel config
BZ: 29652
Change-Id: Iaf38d9f3f190cb01de167cbeab46e5d5389b3361
Signed-off-by: Christophe Guerard <christophe.guerard@intel.com>
Reviewed-on: http://android.intel.com:8080/37996
Reviewed-by: Gross, Mark <mark.gross@intel.com>
Tested-by: Zhang, Dongxing <dongxing.zhang@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
lizhuangzhi [Wed, 28 Mar 2012 14:16:04 +0000 (22:16 +0800)]
misc/apds990x: Fix proximity sensor couldn't wakeup screen issue
BZ: 28722
Remove IRQF_TRIGGER_LOW flag when request_threaded_irq, We only need
to use IRQF_TRIGGER_FALLING for interrupt triger, This will avoid
IRQ pending when wakeup system.If we use level trigger mode, after the
system wakeup by IRQ, need to check_irq_resend when resume noirq, the level
irq will be ignored, so irq handler won't run, the irq pending bit never cleared.
Change-Id: I1a646ed5b3a4caff2efd93a82248e034c4fc41a2
Signed-off-by: Zhuangzhi Li <zhuangzhi.li@intel.com>
Reviewed-on: http://android.intel.com:8080/41353
Reviewed-by: Yan, Leo <leo.yan@intel.com>
Reviewed-by: Du, Alek <alek.du@intel.com>
Reviewed-by: Onkalo, Samu <samu.onkalo@intel.com>
Reviewed-by: Koskinen, Ilkka <ilkka.koskinen@intel.com>
Reviewed-by: Gross, Mark <mark.gross@intel.com>
Tested-by: Wang, Zhifeng <zhifeng.wang@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Chuanxiao Dong [Thu, 29 Mar 2012 03:47:03 +0000 (11:47 +0800)]
mmc: core: rework mmc_mmc_erase_timeout function
BZ: 29554
The calculation of erase/trim timeout is not excatly the same with
spec. Needs a rework. This patch can fix this.
Change-Id: Ieca799d2f1c181304f5dc57e896114868fe6ed99
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Reviewed-on: http://android.intel.com:8080/41560
Reviewed-by: Tang, Richard <richard.tang@intel.com>
Tested-by: Sun, Jianhua <jianhua.sun@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
jli119X [Tue, 27 Mar 2012 00:52:17 +0000 (08:52 +0800)]
CTS failure: android.net.cts.TrafficStatsTest#testTrafficStatsForLocalhost
BZ: 22053
Root cause: We should turn on the ONFIG_UID_STAT switch in arch/x86/configs/i386_mfld_defconfig
to get the specified process's traffic state.
Change-Id: I87bf3e4edc062c2669418b5850ac7da7dcc328c4
Signed-off-by: jli119X <jianpingx.li@intel.com>
Reviewed-on: http://android.intel.com:8080/40768
Reviewed-by: Monroy, German <german.monroy@intel.com>
Reviewed-by: Yang, Fei <fei.yang@intel.com>
Reviewed-by: Wood, Brian J <brian.j.wood@intel.com>
Reviewed-by: Zhang, Hongyu <hongyu.zhang@intel.com>
Reviewed-by: Li, XiaojingX <xiaojingx.li@intel.com>
Tested-by: Li, XiaojingX <xiaojingx.li@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Vaibhav Agarwal [Tue, 20 Mar 2012 19:24:45 +0000 (00:54 +0530)]
Audio: Add different handler for button_press GPIO
BZ: 26377
Currently, only single handler is used for HP_DET,
BUTTON_PRESS interrupt line. However, it should be handled
differently. Thus, no interrupts are reported for button
press event(s).
The solution is to register seperate handlers for different
GPIO lines and handle each event appropriately.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@intel.com>
Change-Id: I8262487d423a10f49d93ca24be7a43cbac894738
Reviewed-on: http://android.intel.com:8080/39834
Reviewed-by: Kp, Jeeja <jeeja.kp@intel.com>
Reviewed-by: Koul, Vinod <vinod.koul@intel.com>
Reviewed-by: M, Arulselvan <arulselvan.m@intel.com>
Tested-by: M, Arulselvan <arulselvan.m@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Vaibhav Agarwal [Mon, 12 Mar 2012 09:51:44 +0000 (15:21 +0530)]
Audio: Check for jack status during boot time for HP_DET gpio pin only
BZ: 27809
During clv_soc_jack_add_gpio(), clv_soc_jack_gpio_detect() is
executed irrespective of GPIO pin. (Headset detection, button press)
This caused, erroneous jack status reported to above layer during
boot time.
The solution is to verify jack status during boot time for HP_DET
gpio pin only.
This patch also contains some changes in clv_machine, cs42l73 driver
to be used as a loadable module.
Change-Id: I943fc6efb40bf16a6ecf2763c7263cbaeec9556c
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@intel.com>
Reviewed-on: http://android.intel.com:8080/39830
Reviewed-by: Koul, Vinod <vinod.koul@intel.com>
Reviewed-by: M, Arulselvan <arulselvan.m@intel.com>
Tested-by: M, Arulselvan <arulselvan.m@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
KP, Jeeja [Wed, 14 Mar 2012 23:26:47 +0000 (04:56 +0530)]
audio: Added mixer control to select Master/Slave mode for Voice port.
BZ: 25500
Added mixer control to select Master/Slave mode for Voice port.
For Voip call the Voice port need to be configured in I2S master mode and
for CSV call Voice port need to be configured in I2S Slave mode.
This patch add's mixer control to select Master and Slave Mode for Voice port
Change-Id: I6cd9370a5cd57b0a099906afcdcbe1b79ffbafdc
Signed-off-by: KP, Jeeja <jeeja.kp@intel.com>
Reviewed-on: http://android.intel.com:8080/39088
Reviewed-by: Koul, Vinod <vinod.koul@intel.com>
Reviewed-by: Agarwal, Vaibhav <vaibhav.agarwal@intel.com>
Reviewed-by: M, Arulselvan <arulselvan.m@intel.com>
Tested-by: M, Arulselvan <arulselvan.m@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
David Cohen [Wed, 28 Mar 2012 13:50:15 +0000 (16:50 +0300)]
atomisp: silence false-positive critical KW issue
BZ: 24562
KW cannot detect very well kernel code flow. For 3rd time we receive
same false-positive critical KW issue. This patch will trick KW.
Change-Id: Ibdf97d69284d70a62253f510c4e8af5b6212f446
Signed-off-by: David Cohen <david.a.cohen@intel.com>
Reviewed-on: http://android.intel.com:8080/41327
Reviewed-by: Koskinen, Ilkka <ilkka.koskinen@intel.com>
Tested-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Jacob Pan [Wed, 11 Jan 2012 06:44:25 +0000 (22:44 -0800)]
v4l/atomisp: let pmu driver handle power island states
BZ: 25359
When atomisp is treated as real PCI device as it should be, ISP
often refuses to transition from D3hot to D0 state. This is likely
caused by an ordering problem where in resume PCI PM core restores
config space prior to calling pci_set_power_state and the driver's
rpm resume function. PMCSR in PCI PM cap is set to D0 from D3 but
refuses to transition possibly due to the fact that power islands
are still down for atomisp.
This patch moves power island control from driver rpm callbacks to
pmu driver such that the action is better coordinated.
Change-Id: I83ac338aa391793a2da12371dd9b6787370cb21d
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Acked-by: David Cohen <david.a.cohen@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-on: http://android.intel.com:8080/36782
Reviewed-by: Shevchenko, Andriy <andriy.shevchenko@intel.com>
Reviewed-by: Mansoor, Illyas <illyas.mansoor@intel.com>
Reviewed-by: Hogander, Jouni <jouni.hogander@intel.com>
Reviewed-by: Cohen, David A <david.a.cohen@intel.com>
Reviewed-by: Koski, Anttu <anttu.koski@intel.com>
Tested-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Alek Du [Mon, 5 Dec 2011 02:39:19 +0000 (02:39 +0000)]
hsu: optimize console idle time
BZ: 27541
HSU console blocks runtime suspend for 2 seconds event it is not in using.
This patch optimize HSU driver to suspend quickly while HSU console is
inactive.
Change-Id: I610e1430dcbd69f91f407e3ddfa25adb0e100fdb
Signed-off-by: Alek Du <alek.du@intel.com>
Signed-off-by: Bin Yang <bin.yang@intel.com>
Reviewed-on: http://android.intel.com:8080/26047
Tested-by: Wang, Zhifeng <zhifeng.wang@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Yun(Mark) Tu [Thu, 29 Mar 2012 23:25:28 +0000 (16:25 -0700)]
GFX-3D: WA: program SGXMP2 clock gating earlier
BZ:26839
WA in PO: Program SGX544MP master clk gating earlie, or CPU stuck later
before loading SGX driver, root cause is still unkown
Signed-off-by: Yun(Mark) Tu <yun.tu@intel.com>
Change-Id: I921f5f85ca5f98efcaab2aa56225977ee3e9bd9b
Reviewed-on: http://android.intel.com:8080/41718
Reviewed-by: Tu, Yun <yun.tu@intel.com>
Reviewed-by: Dai, Yu <yu.dai@intel.com>
Reviewed-by: Xu, Randy <randy.xu@intel.com>
Tested-by: Xu, Randy <randy.xu@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Lei Zhang [Tue, 27 Mar 2012 08:19:44 +0000 (16:19 +0800)]
Gfx-Display: correct the reg setting of MIPIA_PORT_CTRL in driver
BZ: 29163
This patch corrects the reg setting of bit 23 in MIPIA_PORT_CTRL. This bit should
be always set to 0 for PNWB0 and forward. The bit defination changed from PNW A0
to B0, but the Spec is not updated to the date. Here in driver correct this bit setting
to 0 as required.
Change-Id: I7bef71ccdeedd349a35259b78c1aab1fca0f3371
Signed-off-by: Lei Zhang <lei.zhang@intel.com>
Reviewed-on: http://android.intel.com:8080/40888
Reviewed-by: Xu, Randy <randy.xu@intel.com>
Tested-by: Xu, Randy <randy.xu@intel.com>
Reviewed-by: Ai, Ke <ke.ai@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Zhang Dongsheng [Thu, 22 Mar 2012 10:38:34 +0000 (18:38 +0800)]
GFX-Display: support multi bytes read from panel.
BZ: 28604
For read multi bytes, driver need to set Max return size.
Change-Id: I7112f1bebf55ba108c867fff75f3faa667d732c8
Signed-off-by: Ke Ai <ke.ai@intel.com>
Signed-off-ny: Dongsheng zhang<dongsheng.zhang@intel.com>
Reviewed-on: http://android.intel.com:8080/40439
Reviewed-by: Xu, Randy <randy.xu@intel.com>
Tested-by: Xu, Randy <randy.xu@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Ke Ai [Thu, 22 Mar 2012 10:11:57 +0000 (18:11 +0800)]
GFX-Display: support send command align to byte.
BZ: 28302
1.before this patch, the DCS parameters max to 8
which not meet some DCS command necessary.
2.another, before this patch, command send align to
DWORD, which has potential overwrite panel intrel
register problem.
here ,update it more dynamic
Change-Id: I0d6544e7b8127f03d8a1be25dad41c0834ece77c
Signed-off-by: Ke Ai <ke.ai@intel.com>
Reviewed-on: http://android.intel.com:8080/40438
Reviewed-by: Xu, Randy <randy.xu@intel.com>
Tested-by: Xu, Randy <randy.xu@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Austin Hu [Thu, 22 Mar 2012 09:02:16 +0000 (17:02 +0800)]
GFX-Display: enabled Enzo MIPI panel type dynamic detection.
BZ: 23437
The patch depends on patch #31959, #31960 and #34457.
Enabled MIPI panel dynamic detection according to firmware GCT data,
so that the unified display driver build could be used for PRx and
Enzo SC1 systems.
Change-Id: I12e05557ccca09a10b03c4381b70a1d266ae2f0e
Signed-off-by: Austin Hu <austin.hu@intel.com>
Signed-off-by: Lei Zhang <lei.zhang@intel.com>
Signed-off-by: zhang dongming <dongmingx.zhang@intel.com>
Reviewed-on: http://android.intel.com:8080/40138
Reviewed-by: Xu, Randy <randy.xu@intel.com>
Tested-by: Xu, Randy <randy.xu@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Ke Ai [Tue, 13 Mar 2012 07:41:43 +0000 (15:41 +0800)]
GFX-Display:dynamic caculate DSI clock according mode
BZ: 28373
Before this patch, the DSI lock is hard code. Here update it according format caculate.
Please use the mode->vrefresh to change the DSI lock, as you wanted.
The DPLL will be changed during restore.In restore function, DPLL changed to by pass mode.
by functon mdfld_dsi_controller_init. in fact, this function is not necessary here. Another
place will take care this.
mdfld_auo_dsi_dbi_restore(struct drm_encoder *encoder)
-------> mdfld_auo_dsi_controller_init(dsi_config, dsi_config->pipe, true);
Change-Id: I90c3f231d8f568a2d7a5d0f35d6608d40536a108
Signed-off-by: Ke Ai <ke.ai@intel.com>
Signed-off-by: Lei Zhang <lei.zhang@intel.com>
Signed-off-by: Geng Xiujun <xiujun.geng@intel.com>
Reviewed-on: http://android.intel.com:8080/39871
Reviewed-by: Xu, Randy <randy.xu@intel.com>
Tested-by: Xu, Randy <randy.xu@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Ramachandra Sudarshan N [Thu, 22 Mar 2012 06:25:00 +0000 (11:55 +0530)]
[REVERTME] intel_mid_hsi: workaround for HSI suspend in Redridge
BZ: 28547
In Redridge HSI is not going into runtime suspend state which
blocks S0ix. This patch provides a workaround till a real fix
is in place
Change-Id: I56797865c6e9128893fc7ef0544e01241ea26e05
Signed-off-by: Sudarshan Ramachandra <sudarshan.n.ramachandra@intel.com>
Reviewed-on: http://android.intel.com:8080/40107
Reviewed-by: Stoltz-douchet, OlivierX <olivierx.stoltz-douchet@intel.com>
Reviewed-by: Roulliere, Pierre <pierre.roulliere@intel.com>
Reviewed-by: Predon, Frederic <frederic.predon@intel.com>
Reviewed-by: Lebsir, SamiX <samix.lebsir@intel.com>
Tested-by: Lebsir, SamiX <samix.lebsir@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
liu chuansheng [Tue, 27 Mar 2012 09:13:22 +0000 (17:13 +0800)]
wakeup_log: adding the irq action name to output
BZ: 29086
When system wakeup from S3, current wakeup is as below:
[ 123.765635] wakeup from IRQ 67
We can not easily to know where is the IRQ from, unless
cat /proc/interrupts.
The changing is adding the action name to output, the traces
will like below:
[ 320.280637] wakeup from IRQ 67
[ 320.280643] IRQ 67,action name:msic_power_btn
Change-Id: Ieda5eea7e51d0e98fb1ff213467e86d91fa62d37
Signed-off-by: liu chuansheng <chuansheng.liu@intel.com>
Reviewed-on: http://android.intel.com:8080/40767
Reviewed-by: Martin, LoicX <loicx.martin@intel.com>
Reviewed-by: Mansoor, Illyas <illyas.mansoor@intel.com>
Reviewed-by: Koskinen, Ilkka <ilkka.koskinen@intel.com>
Tested-by: Martin, LoicX <loicx.martin@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Yun(Mark) Tu [Wed, 28 Mar 2012 20:47:56 +0000 (13:47 -0700)]
GFX-3D: Add related config to support SGX544 MP2
BZ: 26839
Add DRM_CTP_PR1 into Kconfig, and SGX544MP2's register bar length is
0x10000
Change-Id: I355ca4c08b0cc79877fb1e538c9725f44bbf20ba
Signed-off-by: Yun(Mark) Tu <yun.tu@intel.com>
Reviewed-on: http://android.intel.com:8080/41511
Reviewed-by: Ponnusamy, Siva Prasath <siva.prasath.ponnusamy@intel.com>
Reviewed-by: Dai, Yu <yu.dai@intel.com>
Reviewed-by: Xu, Randy <randy.xu@intel.com>
Tested-by: Xu, Randy <randy.xu@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Wu, Hao [Tue, 27 Mar 2012 14:43:12 +0000 (22:43 +0800)]
usb/penwell_otg: increase timeout to keep Vbus invalid in idle state.
BZ: 28539
This patch workaround resolved the issue VBUS will not stay off for
5s. Also increase A_WAIT_BCON timer for better user experience.
Change-Id: I3c9e24200187081a72425a52ee179019512dde10
Signed-off-by: Wu, Hao <hao.wu@intel.com>
Reviewed-on: http://android.intel.com:8080/40951
Reviewed-by: Zhuang, Jin Can <jin.can.zhuang@intel.com>
Reviewed-by: Tang, Richard <richard.tang@intel.com>
Reviewed-by: Li, Wenji <wenji.li@intel.com>
Reviewed-by: Meng, Zhe <zhe.meng@intel.com>
Tested-by: Meng, Zhe <zhe.meng@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Wu, Hao [Tue, 27 Mar 2012 13:22:01 +0000 (21:22 +0800)]
usb/langwell_udc: reset the maxpacket when disable ep
BZ: 29129
This patch resets the maxpacket value, as everytime the
ep descriptor maxpacketsize will be from ep maxpacket.
If we don't reset the maxpacket, errors will happen when
reassign eps to new gadget functions.
Change-Id: Ice22e8d4b78ba6a967cee6ce5fbecbfc79b42759
Signed-off-by: Wu, Hao <hao.wu@intel.com>
Reviewed-on: http://android.intel.com:8080/40943
Reviewed-by: Zhuang, Jin Can <jin.can.zhuang@intel.com>
Reviewed-by: Tang, Richard <richard.tang@intel.com>
Reviewed-by: Li, Wenji <wenji.li@intel.com>
Reviewed-by: Meng, Zhe <zhe.meng@intel.com>
Tested-by: Meng, Zhe <zhe.meng@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Pandey Raj [Wed, 28 Mar 2012 07:39:37 +0000 (13:09 +0530)]
Updating UI to show the battery percentage increase every 60s
BZ: 24777
Whenever charger is connected/removed to the platform the UI should
update the battery percetange increasing/decreasing. So, the UI update
is done using the polling method rightnow. The interrupt based solution
is WIP and needs to be verified on few platforms before going into
mainline.
Change-Id: Id42349b5ceb07b9e7144a1f2adfd8d9b2442d272
Signed-off-by: Pandey Raj <raj.pandey@intel.com>
Reviewed-on: http://android.intel.com:8080/40679
Reviewed-by: Pallala, Ramakrishna <ramakrishna.pallala@intel.com>
Tested-by: Kallappa Manjanna, MadhukumarX <madhukumarx.kallappa.manjanna@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Venkat Jayaraman [Fri, 23 Mar 2012 00:11:18 +0000 (17:11 -0700)]
GFX: Support for Graphics Device ID change in CLV+
BZ: 28684
PCI Device ID for Graphics changed from 0x08C7 in CLV A0 to 0x08C8 in CLV+.
This patch adds support for that change
Change-Id: I8dcbcc3378ea488245a429ddde3399121f60aa31
Signed-off-by: Venkat Jayaraman <venkat.jayaraman@intel.com>
Reviewed-on: http://android.intel.com:8080/40279
Reviewed-by: Renganathan, Prabu <prabu.renganathan@intel.com>
Reviewed-by: Ponnusamy, Siva Prasath <siva.prasath.ponnusamy@intel.com>
Reviewed-by: Dai, Yu <yu.dai@intel.com>
Reviewed-by: Xu, Randy <randy.xu@intel.com>
Tested-by: Xu, Randy <randy.xu@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
faxing [Mon, 19 Mar 2012 22:16:47 +0000 (15:16 -0700)]
GFX-DISPLAY: Add supports for CMI 720p command mode MIPI display
BZ: 13525
This patch is for the implementation of CMI 720p command mode. It has been verified.
This is to fix the compiler's warning messages in some source codes under /drv folder. This patch had been verified with CMI video/command modes.
In order to make command mode build, 'CONFIG_SUPPORT_MIPI_H8C7_CMD_DISPLAY=y' needs to be added in /vendor/intel/ctp_pr0/ctp_pr0_diffconfig
Change-Id: Idf06a8761b204f1fe2416279ca87d414a645a353
Signed-off-by: faxing <faxingx.x.lu@intel.com>
Signed-off-by: Lei Zhang <lei.zhang@intel.com>
Reviewed-on: http://android.intel.com:8080/40123
Reviewed-by: Xu, Randy <randy.xu@intel.com>
Reviewed-by: Ai, Ke <ke.ai@intel.com>
Tested-by: Xu, Randy <randy.xu@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
jzhuan5 [Thu, 15 Mar 2012 18:43:07 +0000 (14:43 -0400)]
usb:gadget: fix some trival issues
BZ: 27844
1. clean up PM callbacks and function calls
2. remove redundant mtp code
3. fix the issue that some _ep or _req are used before being checked
Change-Id: Id39876d798a20edd3ceaa0ad9bf85ba1e2fdbe2c
Signed-off-by: jzhuan5 <jin.can.zhuang@intel.com>
Reviewed-on: http://android.intel.com:8080/39512
Reviewed-by: Wang, Feng A <feng.a.wang@intel.com>
Reviewed-by: Tang, Richard <richard.tang@intel.com>
Reviewed-by: Gross, Mark <mark.gross@intel.com>
Reviewed-by: Saripalli, Ramakrishna <ramakrishna.saripalli@intel.com>
Reviewed-by: Meng, Zhe <zhe.meng@intel.com>
Tested-by: Meng, Zhe <zhe.meng@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
ziyux.jiang [Thu, 15 Mar 2012 09:16:44 +0000 (17:16 +0800)]
atomisp: atomisp driver prints too much info
BZ: 1973
this patch will disable the prints that don't
indicate errors.
Change-Id: If4a62afece6de979e8af36287b5420207f8a45b3
Signed-off-by: ziyux.jiang <ziyux.jiang@intel.com>
Reviewed-on: http://android.intel.com:8080/39231
Reviewed-by: Kruger, Jozef <jozef.kruger@intel.com>
Reviewed-by: Koski, Anttu <anttu.koski@intel.com>
Tested-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Dale Stimson [Wed, 14 Mar 2012 21:49:29 +0000 (14:49 -0700)]
Build-time specification of correct SGX Core for ctp_pr1 variant, KM.
BZ: 26839
Change-Id: I081a96cce389fdc94588e6215917ae700498ac39
Signed-off-by: Dale Stimson <dalex.b.stimson@intel.com>
Reviewed-on: http://android.intel.com:8080/39163
Reviewed-by: Ponnusamy, Siva Prasath <siva.prasath.ponnusamy@intel.com>
Reviewed-by: Dai, Yu <yu.dai@intel.com>
Reviewed-by: Xu, Randy <randy.xu@intel.com>
Tested-by: Xu, Randy <randy.xu@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Yunpeng Gao [Fri, 23 Mar 2012 02:52:41 +0000 (10:52 +0800)]
REVERT ME: Define CONFIG_BOARD_MRFLD_HVP
BZ: 27386
Merrifield HVP platform only implemented 1 storage
host controller - eMMC0. Other 3 storage host controllers
are not existed in FPGA at all.
So the storage driver needs to know the board type
and prevent initialization to the 3 non-existen
host controllers if on the HVP board.
Actually, the board type macro CONFIG_BOARD_MRFLD_HVP
should be defined in arch/x86/Kconfig and enabled in
Merrifeld board specific configuration file. But now
these changes are not introduced yet. So this patch
just set it in mmc driver to make sure the storage
driver working on HVP board.
Once the macro defined and enabled in board specific
configuration file, this patch should be reverted.
Change-Id: I40f1aef2bbb6c3336cb64aa7fe2fdc734eec5126
Signed-off-by: Yunpeng Gao <yunpeng.gao@intel.com>
Reviewed-on: http://android.intel.com:8080/40287
Reviewed-by: Tang, Richard <richard.tang@intel.com>
Tested-by: Sun, Jianhua <jianhua.sun@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Yunpeng Gao [Fri, 23 Mar 2012 02:45:29 +0000 (10:45 +0800)]
Change IRQ polarity to active high for Merrifield
BZ: 27386
Seems the default IRQ polarity setting on ICS mainline
(active low) does not work for Merrifield platform.
At least it prevent the Merrifield storage driver from
working.
This patch change it to active high specificly for
Merrfield platform.
Signed-off-by: Yunpeng Gao <yunpeng.gao@intel.com>
Change-Id: I1107f84a707d4caade2308b83c4e2bde3eae4ac0
Reviewed-on: http://android.intel.com:8080/40286
Reviewed-by: Gao, Yunpeng <yunpeng.gao@intel.com>
Reviewed-by: Tang, Richard <richard.tang@intel.com>
Tested-by: Sun, Jianhua <jianhua.sun@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Yunpeng Gao [Fri, 23 Mar 2012 02:42:58 +0000 (10:42 +0800)]
Enable mmc driver in Merrfield configuration
BZ: 27386
The current Merrifield default configuration file
disable mmc driver by default. This patch enable it.
Change-Id: Ic3ec76e2f103acc30815faf26b71367382396981
Signed-off-by: Yunpeng Gao <yunpeng.gao@intel.com>
Reviewed-on: http://android.intel.com:8080/40285
Reviewed-by: Tang, Richard <richard.tang@intel.com>
Tested-by: Sun, Jianhua <jianhua.sun@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Yunpeng Gao [Fri, 23 Mar 2012 02:29:59 +0000 (10:29 +0800)]
Enable Merrifield storage support on ICS mainline
BZ: 27386
Add PCI device ID for Merrifield mmc host controllers
so that they can be recognized by kernel and thus enable
the eMMC/SD/SDIO support for Merrifield platform.
Please note, on Merrifield, all the 4 eMMC/SD/SDIO
host controllers share single PCI device ID but have
different Function number. This is different from
Medfield and Moorestown.
Change-Id: I0da7f0ce7ec77bcf5c8bdbed1a58bccb192ce145
Signed-off-by: Yunpeng Gao <yunpeng.gao@intel.com>
Reviewed-on: http://android.intel.com:8080/40284
Reviewed-by: Tang, Richard <richard.tang@intel.com>
Tested-by: Sun, Jianhua <jianhua.sun@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Shreyas Neerebailoor [Fri, 9 Mar 2012 13:19:26 +0000 (18:49 +0530)]
[PORT FROM R2] GFX-Display: Fix issu of HDMI cannot turn on after end call.
BZ: 24745
The issue is because we lost a HOTPLUG event sending to audio driver, this patch
sends HOTPLUG message according to HDMI port status.
Change-Id: Iac845d5bd34bd5bd722dd44cee9dfd09bf823cf0
Signed-off-by: Shreyas Neerebailoor <shreyasx.neerebailoor@intel.com>
Reviewed-on: http://android.intel.com:8080/38150
Reviewed-by: Xu, Randy <randy.xu@intel.com>
Reviewed-by: Agarwal, Vaibhav <vaibhav.agarwal@intel.com>
Tested-by: Xu, Randy <randy.xu@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Shreyas Neerebailoor [Fri, 9 Mar 2012 13:13:51 +0000 (18:43 +0530)]
[PORT FROM R2] GFX-Display:fix spurious HDMI plug/unplug messages to audio driver
BZ: 21584
currently, gfx driver will send HDMI PLUG/UNPLUG message at several
places, one is in hotplug workqueue, the other is in DPMS.
based on analyze, the messgae sended in DPMS is not needed , if
workqueue has make sure send once. so remove it.
Change-Id: Ibe08eca125745de64af992c438b3934c7ab086ec
Signed-off-by: Shreyas Neerebailoor <shreyasx.neerebailoor@intel.com>
Reviewed-on: http://android.intel.com:8080/38149
Reviewed-by: Xu, Randy <randy.xu@intel.com>
Reviewed-by: Agarwal, Vaibhav <vaibhav.agarwal@intel.com>
Tested-by: Xu, Randy <randy.xu@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Shijie Zhang [Mon, 19 Mar 2012 13:18:38 +0000 (21:18 +0800)]
intel_mid_pmic: update pmic driver
BZ: 27883
This driver separates the interface for accessing PMIC device register
function into a independent PMIC driver, making it more clear in logic.
Change-Id: Ib19f6d14911f6f7e8dbcd79d1d8dcc44cadc223e
Signed-off-by: Shijie Zhang <shijie.zhang@intel.com>
Reviewed-on: http://android.intel.com:8080/39500
Reviewed-by: Du, Alek <alek.du@intel.com>
Tested-by: Wang, Zhifeng <zhifeng.wang@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Ramakrishna Pallala [Mon, 26 Mar 2012 08:27:53 +0000 (13:57 +0530)]
intel-mid: remove WA for smb347 charger
BZ: 29047
This patch removes the WA for adding device entry
in intel-mid.c as the latest IFWI support device entry
for smb347 charger.
Change-Id: Ic6ee390ae82c181dc51e1e6080a1a790bf1a4232
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Reviewed-on: http://android.intel.com:8080/40758
Reviewed-by: Lebouc, Christophe <christophe.lebouc@intel.com>
Reviewed-by: Tc, Jenny <jenny.tc@intel.com>
Reviewed-by: Continente, Christophe <christophe.continente@intel.com>
Reviewed-by: Tardy, Pierre <pierre.tardy@intel.com>
Tested-by: Tardy, Pierre <pierre.tardy@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Philippe Skowronski [Mon, 19 Mar 2012 13:58:51 +0000 (14:58 +0100)]
Revert "mfld-pmu: [REVERT ME] Ignoring UART0/1/2 on CVT platform to avoid BT Hang."
BZ: 28022
Also remove 2 useless CVT defines (USB_DEVICE_ID, SPI1_DEVICE_ID).
This reverts commit
17c26d156ad40a2347c059b7ac74694df501b00e.
Change-Id: I5618142dc1d2a0813e2e93f22fd949e1bb05df23
Signed-off-by: Philippe Skowronski <philippe.skowronski@intel.com>
Reviewed-on: http://android.intel.com:8080/39577
Reviewed-by: Martin, LoicX <loicx.martin@intel.com>
Reviewed-by: Mansoor, Illyas <illyas.mansoor@intel.com>
Tested-by: Chotard, Celine <celine.chotard@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Philippe Skowronski [Mon, 19 Mar 2012 11:57:19 +0000 (12:57 +0100)]
REVERT ME: Add D0i2 support in Security driver PCI configuration.
BZ: 26771
Currently, sep don't have d2_supported flag set in pm capabilities
register, hence the D0i2 to D0i0 transition is prevented by
the pci framework.
PCI configuration for sep should be fixed in IA firmware through BZ24829.
I am re-submitting to make sure theat buildbot does not complain
before I ca approve this patch (M. Allyn 3/21/12)
Change-Id: Ib7349d734dec780afd51903208d62ec271794107
Signed-off-by: Philippe Skowronski <philippe.skowronski@intel.com>
Reviewed-on: http://android.intel.com:8080/39571
Reviewed-by: Allyn, Mark A <mark.a.allyn@intel.com>
Tested-by: Chotard, Celine <celine.chotard@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Philippe Skowronski [Mon, 19 Mar 2012 11:53:11 +0000 (12:53 +0100)]
Add Security driver (sep_sec_driver) to CLV.
BZ: 26771
Re submit to make sure that buildbot okays patch
Change-Id: I072d67944ca75ff65cfb614509a6c3c09604efe8
Signed-off-by: Philippe Skowronski <philippe.skowronski@intel.com>
Reviewed-on: http://android.intel.com:8080/39570
Reviewed-by: Allyn, Mark A <mark.a.allyn@intel.com>
Tested-by: Chotard, Celine <celine.chotard@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Antti Laakso [Wed, 21 Mar 2012 15:43:46 +0000 (17:43 +0200)]
lm3554: removing compiler warnings from lm3554
BZ:26628
Removing compiler warnings from lm3554
Change-Id: I49be41994e400f71cc4de91fc35749dee8a20047
Signed-off-by: Antti Laakso <antti.laakso@intel.com>
Reviewed-on: http://android.intel.com:8080/39997
Reviewed-by: Toivonen, Tuukka <tuukka.toivonen@intel.com>
Reviewed-by: Kruger, Jozef <jozef.kruger@intel.com>
Reviewed-by: Koski, Anttu <anttu.koski@intel.com>
Tested-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: Shevchenko, Andriy <andriy.shevchenko@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Tuukka Toivonen [Mon, 26 Mar 2012 08:18:48 +0000 (11:18 +0300)]
atomisp: use GFP_KERNEL on CTP when ISP allocates memory
BZ: 27472
On CTP platform, ISP easily runs out of memory. Use GFP flags on
allocation on CTP which allow kernel to wait for other drivers to free
up memory before failing.
Change-Id: I4f12ccfd85f7318db92b199daffe115c8789621e
Signed-off-by: Tuukka Toivonen <tuukka.toivonen@intel.com>
Reviewed-on: http://android.intel.com:8080/40731
Reviewed-by: Cohen, David A <david.a.cohen@intel.com>
Tested-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: Laakso, Antti <antti.laakso@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Tuukka Toivonen [Thu, 22 Mar 2012 10:06:00 +0000 (12:06 +0200)]
ov8830: add partial support for getting sensor mode data
BZ: 27475
Set sensor mode data to camera mipi info. This data can be then
read using the ATOMISP_IOC_G_SENSOR_MODE_DATA private ioctl.
Currently sensor pixel clock, frame length and width (including
blanking times) are returned which allows 3A to calculate exposure
time.
Change-Id: I2d10cab209b231ccfec98d2a66334e930d8e9f3c
Signed-off-by: Tuukka Toivonen <tuukka.toivonen@intel.com>
Reviewed-on: http://android.intel.com:8080/40164
Reviewed-by: Cohen, David A <david.a.cohen@intel.com>
Reviewed-by: Koski, Anttu <anttu.koski@intel.com>
Tested-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Tuukka Toivonen [Fri, 16 Mar 2012 16:06:19 +0000 (18:06 +0200)]
ov8830: add exposure and gain control
BZ: 27475
Add exposure and gain control. Only the private ioctl
ATOMISP_IOC_S_EXPOSURE is supported for now.
Change-Id: I1021db882ee0b3bc3c7c88df9e99a0ec4af7d61c
Signed-off-by: Tuukka Toivonen <tuukka.toivonen@intel.com>
Reviewed-on: http://android.intel.com:8080/40163
Reviewed-by: Cohen, David A <david.a.cohen@intel.com>
Reviewed-by: Koski, Anttu <anttu.koski@intel.com>
Tested-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Tuukka Toivonen [Tue, 20 Mar 2012 15:52:27 +0000 (17:52 +0200)]
Revert "ov8830: adjust manual white balance gains"
BZ: 27474
This reverts commit
fedcb9ef420c8a975fd3932d6280423bbc4f1ee6.
With tuning data, ISP is performing automatic white balance (AWB)
and sensor AWB should be disabled.
Change-Id: Ia27e7711f7ba2b106cfff5ba913a673335e3151f
Signed-off-by: Tuukka Toivonen <tuukka.toivonen@intel.com>
Reviewed-on: http://android.intel.com:8080/39801
Reviewed-by: Cohen, David A <david.a.cohen@intel.com>
Reviewed-by: Koski, Anttu <anttu.koski@intel.com>
Tested-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Andy Shevchenko [Tue, 13 Mar 2012 07:51:11 +0000 (09:51 +0200)]
atomisp: fix num_flash_frames logic
BZ: 27997
Currently the num_flash_frames is used like a boolean. Let's make it usable on
a sequence of the frames.
A userspace could behave in the same way of following example:
if (do_use_flash)
video_request_flash(dev, num_flash_frames);
...
do {
do_dqbuf(dev, &buf, ...); /* dequeue buffer */
if (!do_use_flash ||
buf.reserved == ATOMISP_FRAME_STATUS_FLASH_FAILED ||
buf.reserved == ATOMISP_FRAME_STATUS_FLASH_EXPOSED)
break;
do_qbuf(dev, &buf, ...); /* requeue buffer */
} while (1);
This patch also allows to ask for zero flash frames in case when we would like
to abort stalled operation.
Change-Id: I8e693263b7977723fac70769d93d4d90e3ddaaca
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-on: http://android.intel.com:8080/39568
Reviewed-by: Shevchenko, Andriy <andriy.shevchenko@intel.com>
Reviewed-by: Cohen, David A <david.a.cohen@intel.com>
Tested-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Ramesh Babu K V [Mon, 19 Mar 2012 06:22:43 +0000 (11:52 +0530)]
audio:remove mutual exclusion check between codec PCM ports
BZ: 24619
Currently the platform driver make sure that either PCM1
or PCM2 is opened at a time. This condition was added to
to make sure that both ports are opened with same
base frequency.
Allow both PCM1 and PCM2 to operate at same time. However
application has to open both ports with the same base frequency.
If app opens the ports with different base frequency, then
there will be undesirable results.
Driver needs to implement alsa way of handling the frequency constraint
between different dais.
Change-Id: Ic2cc292a0048afac14fea64164f06300eae57653
Signed-off-by: Ramesh Babu K V <ramesh.babu@intel.com>
Reviewed-on: http://android.intel.com:8080/39528
Reviewed-by: Agarwal, Vaibhav <vaibhav.agarwal@intel.com>
Reviewed-by: Abdullah, Omair M <omair.m.abdullah@intel.com>
Reviewed-by: Hibare, PramodX <pramodx.hibare@intel.com>
Tested-by: Hibare, PramodX <pramodx.hibare@intel.com>
Reviewed-by: Koul, Vinod <vinod.koul@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Ramesh Babu K V [Tue, 13 Mar 2012 06:29:36 +0000 (11:59 +0530)]
audio:enable single channel speaker support
BZ: 26689
Enable single channel speaker support for gilligan island
board. Application will play stereo data to sound card.
LPE firmware will downmix the stereo channels to single
channel and send it on left channel.
This patch sends message to LPE indicating that speaker has
only one channel. LPE will use this message to construct the
speaker pipeline appropriately.
Change-Id: I9f603e96d33b7840d3163162274c3348b3240e2a
Signed-off-by: Ramesh Babu K V <ramesh.babu@intel.com>
Reviewed-on: http://android.intel.com:8080/38785
Reviewed-by: Agarwal, Vaibhav <vaibhav.agarwal@intel.com>
Reviewed-by: Abdullah, Omair M <omair.m.abdullah@intel.com>
Reviewed-by: Koskinen, Ilkka <ilkka.koskinen@intel.com>
Reviewed-by: Neerebailoor, ShreyasX <shreyasx.neerebailoor@intel.com>
Reviewed-by: Koul, Vinod <vinod.koul@intel.com>
Reviewed-by: Monroy, German <german.monroy@intel.com>
Reviewed-by: Hibare, PramodX <pramodx.hibare@intel.com>
Tested-by: Hibare, PramodX <pramodx.hibare@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
jzhuan5 [Thu, 15 Mar 2012 19:05:00 +0000 (15:05 -0400)]
usb:langwell_udc: dump endpoint info if dTD error happens
BZ: 27693
Dump endpoint info if dTD error happens to track dTD error issue.
The info will be useful to identify the cause of issue.
Change-Id: I32ec8142c22d3f69655d124948cd056f67b09fee
Signed-off-by: jzhuan5 <jin.can.zhuang@intel.com>
Reviewed-on: http://android.intel.com:8080/40102
Reviewed-by: Wu, Hao <hao.wu@intel.com>
Reviewed-by: Tang, Richard <richard.tang@intel.com>
Reviewed-by: Meng, Zhe <zhe.meng@intel.com>
Tested-by: Meng, Zhe <zhe.meng@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Elaine Wang [Thu, 22 Mar 2012 05:42:16 +0000 (13:42 +0800)]
Set DRM_UNLOCKED flag to TTM synccpu and waitidle ioctl.
BZ: 26344
H.264 1080p encoding time is too long, it takes about 30ms to encode one frame.
The graphic sync vblank drm ioctl and video waitidle ioctl might take much time
than others and prevent other drm ioctls from running, which cause encoder performance
drop a lot while decoding a clip and displaying it. This patch set DRM_UNLOCKED flag
to TTM synccpu, waitidle and cmdbuf ioctl and also add reserve buffer object
protection for psb_pl_synccpu_ioctl. The psb_cmdbuf_ioctl function already has
a mutex_lock itself.
Signed-off-by: Elaine Wang <elaine.wang@intel.com>
Change-Id: I58f7ecd69c7f828b90a49e23383584a59a351a89
Reviewed-on: http://android.intel.com:8080/40105
Reviewed-by: Wang, Elaine <elaine.wang@intel.com>
Reviewed-by: Zeng, Li <li.zeng@intel.com>
Reviewed-by: Xu, Randy <randy.xu@intel.com>
Reviewed-by: Tu, Yun <yun.tu@intel.com>
Reviewed-by: Hu, Jason <jason.hu@intel.com>
Reviewed-by: Ding, Haitao <haitao.ding@intel.com>
Tested-by: Ding, Haitao <haitao.ding@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Antti Laakso [Wed, 21 Mar 2012 15:42:09 +0000 (17:42 +0200)]
ov8830: removing compiler warnings from ov8830
BZ:26628
Removing compiler warnings from ov8830
Change-Id: I8ab83595857cb8635d9b0acfb2b708d0843a7432
Signed-off-by: Antti Laakso <antti.laakso@intel.com>
Reviewed-on: http://android.intel.com:8080/39996
Reviewed-by: Koski, Anttu <anttu.koski@intel.com>
Tested-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: Kruger, Jozef <jozef.kruger@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Antti Laakso [Wed, 21 Mar 2012 15:40:28 +0000 (17:40 +0200)]
mt9m114: removing compiler warnings from mt9m114
BZ:26628
Removing compiler warnings from mt9m114
Change-Id: Ib4fdcabc7b49fa096a07781aa8995f3db970d0af
Signed-off-by: Antti Laakso <antti.laakso@intel.com>
Reviewed-on: http://android.intel.com:8080/39995
Reviewed-by: Koski, Anttu <anttu.koski@intel.com>
Tested-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: Shevchenko, Andriy <andriy.shevchenko@intel.com>
Reviewed-by: Kruger, Jozef <jozef.kruger@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Antti Laakso [Wed, 21 Mar 2012 15:38:25 +0000 (17:38 +0200)]
mt9e013: removing compiler warnings from mt9e013
BZ:26628
Removing compiler warnings from mt9e013
Change-Id: I3983069fe7babaa28ab352cb2b59cc0c32aba888
Signed-off-by: Antti Laakso <antti.laakso@intel.com>
Reviewed-on: http://android.intel.com:8080/39994
Reviewed-by: Kruger, Jozef <jozef.kruger@intel.com>
Reviewed-by: Koski, Anttu <anttu.koski@intel.com>
Tested-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: Shevchenko, Andriy <andriy.shevchenko@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Antti Laakso [Tue, 20 Mar 2012 14:07:22 +0000 (16:07 +0200)]
atomisp: removing compiler warnings from atomisp
BZ:26628
Removing compiler warnings from atomisp
Change-Id: Ic4a6af00668fd4e307cde2b858bc43ad392cf1b3
Signed-off-by: Antti Laakso <antti.laakso@intel.com>
Reviewed-on: http://android.intel.com:8080/39784
Reviewed-by: Kruger, Jozef <jozef.kruger@intel.com>
Reviewed-by: Koski, Anttu <anttu.koski@intel.com>
Tested-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: Gupta, Lokesh <lokesh.gupta@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Antti Laakso [Tue, 20 Mar 2012 14:00:42 +0000 (16:00 +0200)]
atomisp: make warnings as errors in atomisp and ov8830
BZ:26628
Enabling -Werror compiler flag to show compiler warnings as errors for atomisp and ov8830 drivers
Change-Id: I4e042cadb8e674eeaaf6013c5b6eec1a32847435
Signed-off-by: Antti Laakso <antti.laakso@intel.com>
Reviewed-on: http://android.intel.com:8080/39783
Reviewed-by: Rose, James <james.rose@intel.com>
Reviewed-by: Gross, Mark <mark.gross@intel.com>
Reviewed-by: Toivonen, Tuukka <tuukka.toivonen@intel.com>
Reviewed-by: Kruger, Jozef <jozef.kruger@intel.com>
Reviewed-by: Koski, Anttu <anttu.koski@intel.com>
Tested-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Tuukka Toivonen [Mon, 12 Mar 2012 14:24:01 +0000 (16:24 +0200)]
lm3554: add platform data containing LED flash GPIO numbers
BZ: 21928
lm3554 LED flash driver torch control pin is connected to
different GPIO pin in Black Bay and Red Hook Bay. Create
platform data for the lm3554 containing the correct GPIO pin numbers
and get the GPIO numbers from the SFI table.
Change-Id: I94d041c9c512af32943890b6d9b9e72b8b8c9fc4
Signed-off-by: Tuukka Toivonen <tuukka.toivonen@intel.com>
Reviewed-on: http://android.intel.com:8080/33751
Reviewed-by: Wood, Brian J <brian.j.wood@intel.com>
Tested-by: Wood, Brian J <brian.j.wood@intel.com>
Reviewed-by: Gross, Mark <mark.gross@intel.com>
Reviewed-by: Kruger, Jozef <jozef.kruger@intel.com>
Reviewed-by: Kuppuswamy, Sathyanarayanan <sathyanarayanan.kuppuswamy@intel.com>
Reviewed-by: Koskinen, Ilkka <ilkka.koskinen@intel.com>
Reviewed-by: Vanhala, JariX <jarix.vanhala@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Leo Yan [Tue, 20 Mar 2012 01:19:06 +0000 (09:19 +0800)]
rmi4: Enable upstream rmi touch driver for Clovertrail
BZ: 28085
Enable upstream rmi touch driver for Clovertrail
Change-Id: I8c4c7476e929ef2a653c05c9236aff17771cee1f
Signed-off-by: Leo Yan <leo.yan@intel.com>
Reviewed-on: http://android.intel.com:8080/39682
Reviewed-by: Cai, Stanley W <stanley.w.cai@intel.com>
Tested-by: Wang, Zhifeng <zhifeng.wang@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Frederic Lardeau [Mon, 19 Mar 2012 13:26:57 +0000 (14:26 +0100)]
rtc alarm: disable alarm by disabling IRQ
BZ: 27941
The alarm.c disabled the alarm by setting a disabled alarm in the
past. This is a bad, wrong and inappropriate solution with
the new 3.0 kernel. So, we replace it by a more usual
`rtc_alarm_irq_enable' call. This callback was missing in the RTC mrst
driver so we add it too.
Change-Id: I51a01ae4310479b6d928c7d102ea8c5ede392979
Signed-off-by: Frederic Lardeau <fredericx.lardeau@intel.com>
Reviewed-on: http://android.intel.com:8080/39574
Reviewed-by: Romieu, Benoit <benoit.romieu@intel.com>
Tested-by: Romieu, Benoit <benoit.romieu@intel.com>
Reviewed-by: Gross, Mark <mark.gross@intel.com>
Reviewed-by: Kuppuswamy, Sathyanarayanan <sathyanarayanan.kuppuswamy@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Liu, DongxingX [Fri, 16 Mar 2012 09:52:55 +0000 (17:52 +0800)]
USB: gadget: ADB: Add online checking in adb_write function
BZ: 26739
If adb write after unbinding, it will be waiting all the time.
So add online checking to exit the blocking. Or else adb write
will return busy at the second time.
Change-Id: I0fd1bae127fc652e92d89121722f92289ca9e70d
Signed-off-by: Wu, Hao <hao.wu@intel.com>
Signed-off-by: Liu, DongxingX <dongxingx.liu@intel.com>
Reviewed-on: http://android.intel.com:8080/39479
Reviewed-by: Zhuang, Jin Can <jin.can.zhuang@intel.com>
Reviewed-by: Meng, Zhe <zhe.meng@intel.com>
Tested-by: Meng, Zhe <zhe.meng@intel.com>
Reviewed-by: Tang, Richard <richard.tang@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Chuanxiao Dong [Tue, 20 Mar 2012 04:19:44 +0000 (12:19 +0800)]
mmc: retry when SD/MMC reading/writing failed
BZ: 28559
When SD/MMC encounter error during reading/writing, MMC block
layer will reset SD/MMC card and then have a retry with the failed
command. This can improve the stability of the platform.
Change-Id: I4d9b44db75559dfdbc7627742d8c40c8c2ac2865
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Reviewed-on: http://android.intel.com:8080/40110
Reviewed-by: Tang, Richard <richard.tang@intel.com>
Tested-by: Sun, Jianhua <jianhua.sun@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
shi yang [Thu, 1 Mar 2012 08:10:23 +0000 (16:10 +0800)]
[PORT FROM R2] [Display]: fix race between gfx_late_resume and psb_dsp_ioctl.[WORKAROUND]
BZ: 24916
Race condition found between gfx_late_resume and psb_dsp_ioctl. psb_dsp_ioctl will
power down display island B directly whild gfx_late_resume will visit these registers.
This fatal error cause Fabric error.
Add power mutex to protect this code to be safe.
Full code change will be made in R3. and then will make logic more stable.
Change-Id: I64c785875e85de8cd835ee545f5d48ebb3ce8ec1
Orig-Change-Id: Ibab806f1149dc2b0fdc6337049c5ecfccbaed9a8
signed-off-by: He Bo <bo.he@intel.com>
Signed-off-by: shi yang <yang.a.shi@intel.com>
Signed-off-by: Tong, Bo <box.tong@intel.com>
Reviewed-on: http://android.intel.com:8080/40288
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
luliuhui [Wed, 21 Mar 2012 06:29:56 +0000 (14:29 +0800)]
Graphic: Critical Klocwork issues for GRAPHICS domain
BZ: 23906
Revise kw issue in round 51 scan in kernel.
Change-Id: I8094b0054d0a91ae37eef89d2c95561eac84c2c7
Signed-off-by: luliuhui <liuhui.lu@intel.com>
Reviewed-on: http://android.intel.com:8080/39901
Reviewed-by: Tong, BoX <box.tong@intel.com>
Tested-by: Tong, BoX <box.tong@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Pan Zhenjie [Tue, 20 Mar 2012 04:57:16 +0000 (12:57 +0800)]
Graphic: fix mutex starvation issue when changing live wallpaper many times.
BZ: 26394
PVRSRV_BridgeDispatchKM and PVRDRMUnprivCmd have mutex protection in themselves.
So should use DRM_UNLOCKED.
Wallpaper and surfaceflinger will call drm_ioctl.
If do not use DRM_UNLOCKED, PVRSRV_BridgeDispatchKM will be protected by another mutex.
And it will cause mutex starvation issue.
Change-Id: I060f78db4bfeede32cabe581cd86634ac208091f
Signed-off-by: Pan Zhenjie <zhenjie.pan@intel.com>
Reviewed-on: http://android.intel.com:8080/39710
Reviewed-by: Shi, Yang A <yang.a.shi@intel.com>
Reviewed-by: Xu, Randy <randy.xu@intel.com>
Tested-by: Tong, BoX <box.tong@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
jli127 [Thu, 22 Mar 2012 06:19:17 +0000 (14:19 +0800)]
misc/apds990x: Abandon ps/als state once
BZ: 27931
PS sensor driver only reports sensor
data if new state is different from
old state. After disable/enable PS sensor
the old state becomes invalid. This patch
abandon ps old state and make driver
reporting data at every interrupt.
Change-Id: If4e402e01e1fe69354175f1180ec4e6e11a50d03
Signed-off-by: jli127 <jian.d.li@intel.com>
Reviewed-on: http://android.intel.com:8080/40106
Reviewed-by: Liu, Hong <hong.liu@intel.com>
Reviewed-by: Du, Alek <alek.du@intel.com>
Reviewed-by: Yan, Leo <leo.yan@intel.com>
Tested-by: Wang, Zhifeng <zhifeng.wang@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Illyas Mansoor [Thu, 15 Mar 2012 08:37:02 +0000 (14:07 +0530)]
[PORT FROM R2] mid_pmu: emergency pmu interrupt enable request
BZ: 24993
There is a deadlock condition arising because of D0ix completion
interrupt not being handled in OS, because it is currently in Watch
dog timer interrupt handler and the d0ix completion interrupt handler
is masked and cannot execute.
This causes the SCU PMU interrupt to be disabled until EOI interrupt
for d0ix completion is not reached.
Meanwhile OS has issued another PM command and times out because SCU
didn't handle it, and SCU is waiting for PM EOI interrupt to enable
PM interrupts.
We fix this by having a simple protocol between SCU and PMU driver
to write a special command into a specified location that is periodically
checked by SCU, if the command is set SCU will enalbe PM interrupts
thus resolving the deadlock.
Acknoweldgements:
Onkalo, Samu <samu.onkalo@intel.com>, for root causing this issue and proposing
a solution.
Change-Id: I5d39558be03affe8e3900ff7985bfb25a54f4f68
Orig-Change-Id: I28fa561fd9a87251b3a10fcba77739ccdf72829b
Reported-by: Berthier, Emmanuel <emmanuel.berthier@intel.com>
Tested-by: Berthier, Emmanuel <emmanuel.berthier@intel.com>
Signed-off-by: Illyas Mansoor <illyas.mansoor@intel.com>
Reviewed-on: http://android.intel.com:8080/39447
Reviewed-by: Martin, LoicX <loicx.martin@intel.com>
Reviewed-by: Gross, Mark <mark.gross@intel.com>
Reviewed-by: Koskinen, Ilkka <ilkka.koskinen@intel.com>
Tested-by: Martin, LoicX <loicx.martin@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Illyas Mansoor [Fri, 17 Feb 2012 03:21:29 +0000 (08:51 +0530)]
[PORT FROM R2] mid_pmu: remove sram save/restore from pmu
BZ: 24157
Removing sram save/restore from PMU driver code, since
now it is taken care in SCU itself.
Change-Id: Ic98d68506bfaf39ed478de5d2511a4e1cbe30004
Orig-Change-Id: Ib144c060bf9a321e4329083cc85f9279357ea59c
Signed-off-by: Illyas Mansoor <illyas.mansoor@intel.com>
Reviewed-on: http://android.intel.com:8080/39428
Reviewed-by: Martin, LoicX <loicx.martin@intel.com>
Reviewed-by: Monroy, German <german.monroy@intel.com>
Tested-by: Martin, LoicX <loicx.martin@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
John Mathew [Fri, 16 Mar 2012 13:31:23 +0000 (15:31 +0200)]
intel_idle: Power traces should trace sleep state entry
BZ: 27776
Currently the power traces use the value of dev->last_state
variable which is updated after the sleep state is exited.
Move the traces to before sleep entry, so that the total
time spent in a sleep state can be displayed correclty by
tools like pytimechart.
Change-Id: If518e63a6018fdb7aa552bcdfe5d8f61aa974164
Signed-off-by: John Mathew <john.mathew@intel.com>
Reviewed-on: http://android.intel.com:8080/39420
Reviewed-by: Hogander, Jouni <jouni.hogander@intel.com>
Reviewed-by: Gross, Mark <mark.gross@intel.com>
Tested-by: Martin, LoicX <loicx.martin@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Bin Yang [Thu, 22 Mar 2012 07:49:41 +0000 (15:49 +0800)]
remove SPI1 runtime PM workaround
BZ: 25894
Runtime PM issues of SPI1 had been fixed already. Remove
this workaround.
Change-Id: Ib0dc7b47f39dddc98b9806e015df0514e31ea5a4
Signed-off-by: Bin Yang <bin.yang@intel.com>
Reviewed-on: http://android.intel.com:8080/39367
Reviewed-by: Du, Alek <alek.du@intel.com>
Tested-by: Wang, Zhifeng <zhifeng.wang@intel.com>
Reviewed-by: Mansoor, Illyas <illyas.mansoor@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
projects / kernel / kernel-mfld-blackbay.git / log